UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt

462 lines
12 KiB
Plaintext
Raw Normal View History

pinctrl: Rename Broadcom Capri pinctrl binding The compatible string of the Broadcom Capri pinctrl driver is renamed to "brcm,bcm11351-pinctrl" to match the machine binding here: Documentation/devicetree/bindings/arm/bcm/bcm11351.txt Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org>
2014-01-24 04:44:44 +08:00
Broadcom BCM281xx Pin Controller
pinctrl: Add pinctrl binding for Broadcom Capri SoCs Adds pinctrl driver devicetree binding for Broadcom Capri (BCM281xx) SoCs. v4: Changed valid values for "bias-pull-up" property for I2C pins. Expanded pin configuration node example. v3: Use generic pin config properties instead of brcm-specific ones. Clarified pin types (standard, i2c, hdmi). v2: Use hyphens instead of underscore in DT property names. Device tree bindings maintainers ECG: _ _ _ _ _ __________/ \ ________/ \ _____/ \ ___/ \ ___/ \ __ \_/ \_/ \_/ \_/ \_/ Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-21 10:13:34 +08:00
This is a pin controller for the Broadcom BCM281xx SoC family, which includes
BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
=== Pin Controller Node ===
Required Properties:
pinctrl: Rename Broadcom Capri pinctrl binding The compatible string of the Broadcom Capri pinctrl driver is renamed to "brcm,bcm11351-pinctrl" to match the machine binding here: Documentation/devicetree/bindings/arm/bcm/bcm11351.txt Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org>
2014-01-24 04:44:44 +08:00
- compatible: Must be "brcm,bcm11351-pinctrl"
pinctrl: Add pinctrl binding for Broadcom Capri SoCs Adds pinctrl driver devicetree binding for Broadcom Capri (BCM281xx) SoCs. v4: Changed valid values for "bias-pull-up" property for I2C pins. Expanded pin configuration node example. v3: Use generic pin config properties instead of brcm-specific ones. Clarified pin types (standard, i2c, hdmi). v2: Use hyphens instead of underscore in DT property names. Device tree bindings maintainers ECG: _ _ _ _ _ __________/ \ ________/ \ _____/ \ ___/ \ ___/ \ __ \_/ \_/ \_/ \_/ \_/ Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-21 10:13:34 +08:00
- reg: Base address of the PAD Controller register block and the size
of the block.
For example, the following is the bare minimum node:
pinctrl@35004800 {
pinctrl: Rename Broadcom Capri pinctrl binding The compatible string of the Broadcom Capri pinctrl driver is renamed to "brcm,bcm11351-pinctrl" to match the machine binding here: Documentation/devicetree/bindings/arm/bcm/bcm11351.txt Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org>
2014-01-24 04:44:44 +08:00
compatible = "brcm,bcm11351-pinctrl";
pinctrl: Add pinctrl binding for Broadcom Capri SoCs Adds pinctrl driver devicetree binding for Broadcom Capri (BCM281xx) SoCs. v4: Changed valid values for "bias-pull-up" property for I2C pins. Expanded pin configuration node example. v3: Use generic pin config properties instead of brcm-specific ones. Clarified pin types (standard, i2c, hdmi). v2: Use hyphens instead of underscore in DT property names. Device tree bindings maintainers ECG: _ _ _ _ _ __________/ \ ________/ \ _____/ \ ___/ \ ___/ \ __ \_/ \_/ \_/ \_/ \_/ Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-21 10:13:34 +08:00
reg = <0x35004800 0x430>;
};
As a pin controller device, in addition to the required properties, this node
should also contain the pin configuration nodes that client devices reference,
if any.
=== Pin Configuration Node ===
Each pin configuration node is a sub-node of the pin controller node and is a
container of an arbitrary number of subnodes, called pin group nodes in this
document.
Please refer to the pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the definition of a
"pin configuration node".
=== Pin Group Node ===
A pin group node specifies the desired pin mux and/or pin configuration for an
arbitrary number of pins. The name of the pin group node is optional and not
used.
A pin group node only affects the properties specified in the node, and has no
effect on any properties that are omitted.
The pin group node accepts a subset of the generic pin config properties. For
details generic pin config properties, please refer to pinctrl-bindings.txt
and <include/linux/pinctrl/pinconfig-generic.h>.
Each pin controlled by this pin controller belong to one of three types:
Standard, I2C, and HDMI. Each type accepts a different set of pin config
properties. A list of pins and their types is provided below.
Required Properties (applicable to all pins):
- pins: Multiple strings. Specifies the name(s) of one or more pins to
be configured by this node.
Optional Properties (for standard pins):
- function: String. Specifies the pin mux selection. Values
must be one of: "alt1", "alt2", "alt3", "alt4"
- input-schmitt-enable: No arguments. Enable schmitt-trigger mode.
- input-schmitt-disable: No arguments. Disable schmitt-trigger mode.
- bias-pull-up: No arguments. Pull up on pin.
- bias-pull-down: No arguments. Pull down on pin.
- bias-disable: No arguments. Disable pin bias.
- slew-rate: Integer. Meaning depends on configured pin mux:
*_SCL or *_SDA:
0: Standard(100kbps)& Fast(400kbps) mode
1: Highspeed (3.4Mbps) mode
IC_DM or IC_DP:
0: normal slew rate
1: fast slew rate
Otherwise:
0: fast slew rate
1: normal slew rate
doc: spelling error changes Fixed multiple spelling errors. Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Carlos E. Garcia <carlos@cgarcia.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-05 10:31:00 +08:00
- input-enable: No arguments. Enable input (does not affect
pinctrl: Add pinctrl binding for Broadcom Capri SoCs Adds pinctrl driver devicetree binding for Broadcom Capri (BCM281xx) SoCs. v4: Changed valid values for "bias-pull-up" property for I2C pins. Expanded pin configuration node example. v3: Use generic pin config properties instead of brcm-specific ones. Clarified pin types (standard, i2c, hdmi). v2: Use hyphens instead of underscore in DT property names. Device tree bindings maintainers ECG: _ _ _ _ _ __________/ \ ________/ \ _____/ \ ___/ \ ___/ \ __ \_/ \_/ \_/ \_/ \_/ Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-21 10:13:34 +08:00
output.)
doc: spelling error changes Fixed multiple spelling errors. Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Carlos E. Garcia <carlos@cgarcia.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-05 10:31:00 +08:00
- input-disable: No arguments. Disable input (does not affect
pinctrl: Add pinctrl binding for Broadcom Capri SoCs Adds pinctrl driver devicetree binding for Broadcom Capri (BCM281xx) SoCs. v4: Changed valid values for "bias-pull-up" property for I2C pins. Expanded pin configuration node example. v3: Use generic pin config properties instead of brcm-specific ones. Clarified pin types (standard, i2c, hdmi). v2: Use hyphens instead of underscore in DT property names. Device tree bindings maintainers ECG: _ _ _ _ _ __________/ \ ________/ \ _____/ \ ___/ \ ___/ \ __ \_/ \_/ \_/ \_/ \_/ Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-21 10:13:34 +08:00
output.)
- drive-strength: Integer. Drive strength in mA. Valid values are
2, 4, 6, 8, 10, 12, 14, 16 mA.
Optional Properties (for I2C pins):
- function: String. Specifies the pin mux selection. Values
must be one of: "alt1", "alt2", "alt3", "alt4"
- bias-pull-up: Integer. Pull up strength in Ohm. There are 3
pull-up resisitors (1.2k, 1.8k, 2.7k) available
in parallel for I2C pins, so the valid values
are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm.
- bias-disable: No arguments. Disable pin bias.
- slew-rate: Integer. Meaning depends on configured pin mux:
*_SCL or *_SDA:
0: Standard(100kbps)& Fast(400kbps) mode
1: Highspeed (3.4Mbps) mode
IC_DM or IC_DP:
0: normal slew rate
1: fast slew rate
Otherwise:
0: fast slew rate
1: normal slew rate
doc: spelling error changes Fixed multiple spelling errors. Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Carlos E. Garcia <carlos@cgarcia.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-05 10:31:00 +08:00
- input-enable: No arguments. Enable input (does not affect
pinctrl: Add pinctrl binding for Broadcom Capri SoCs Adds pinctrl driver devicetree binding for Broadcom Capri (BCM281xx) SoCs. v4: Changed valid values for "bias-pull-up" property for I2C pins. Expanded pin configuration node example. v3: Use generic pin config properties instead of brcm-specific ones. Clarified pin types (standard, i2c, hdmi). v2: Use hyphens instead of underscore in DT property names. Device tree bindings maintainers ECG: _ _ _ _ _ __________/ \ ________/ \ _____/ \ ___/ \ ___/ \ __ \_/ \_/ \_/ \_/ \_/ Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-21 10:13:34 +08:00
output.)
doc: spelling error changes Fixed multiple spelling errors. Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Carlos E. Garcia <carlos@cgarcia.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-05 10:31:00 +08:00
- input-disable: No arguments. Disable input (does not affect
pinctrl: Add pinctrl binding for Broadcom Capri SoCs Adds pinctrl driver devicetree binding for Broadcom Capri (BCM281xx) SoCs. v4: Changed valid values for "bias-pull-up" property for I2C pins. Expanded pin configuration node example. v3: Use generic pin config properties instead of brcm-specific ones. Clarified pin types (standard, i2c, hdmi). v2: Use hyphens instead of underscore in DT property names. Device tree bindings maintainers ECG: _ _ _ _ _ __________/ \ ________/ \ _____/ \ ___/ \ ___/ \ __ \_/ \_/ \_/ \_/ \_/ Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-21 10:13:34 +08:00
output.)
Optional Properties (for HDMI pins):
- function: String. Specifies the pin mux selection. Values
must be one of: "alt1", "alt2", "alt3", "alt4"
- slew-rate: Integer. Controls slew rate.
0: Standard(100kbps)& Fast(400kbps) mode
1: Highspeed (3.4Mbps) mode
doc: spelling error changes Fixed multiple spelling errors. Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Carlos E. Garcia <carlos@cgarcia.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-05 10:31:00 +08:00
- input-enable: No arguments. Enable input (does not affect
pinctrl: Add pinctrl binding for Broadcom Capri SoCs Adds pinctrl driver devicetree binding for Broadcom Capri (BCM281xx) SoCs. v4: Changed valid values for "bias-pull-up" property for I2C pins. Expanded pin configuration node example. v3: Use generic pin config properties instead of brcm-specific ones. Clarified pin types (standard, i2c, hdmi). v2: Use hyphens instead of underscore in DT property names. Device tree bindings maintainers ECG: _ _ _ _ _ __________/ \ ________/ \ _____/ \ ___/ \ ___/ \ __ \_/ \_/ \_/ \_/ \_/ Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-21 10:13:34 +08:00
output.)
doc: spelling error changes Fixed multiple spelling errors. Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Carlos E. Garcia <carlos@cgarcia.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-05 10:31:00 +08:00
- input-disable: No arguments. Disable input (does not affect
pinctrl: Add pinctrl binding for Broadcom Capri SoCs Adds pinctrl driver devicetree binding for Broadcom Capri (BCM281xx) SoCs. v4: Changed valid values for "bias-pull-up" property for I2C pins. Expanded pin configuration node example. v3: Use generic pin config properties instead of brcm-specific ones. Clarified pin types (standard, i2c, hdmi). v2: Use hyphens instead of underscore in DT property names. Device tree bindings maintainers ECG: _ _ _ _ _ __________/ \ ________/ \ _____/ \ ___/ \ ___/ \ __ \_/ \_/ \_/ \_/ \_/ Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-21 10:13:34 +08:00
output.)
Example:
// pin controller node
pinctrl@35004800 {
pinctrl: fix typo in bindings documentation Fixed the missing comma in DT node example. Signed-off-by: Sherman Yin <syin@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-03 06:40:39 +08:00
compatible = "brcm,bcm11351-pinctrl";
pinctrl: Add pinctrl binding for Broadcom Capri SoCs Adds pinctrl driver devicetree binding for Broadcom Capri (BCM281xx) SoCs. v4: Changed valid values for "bias-pull-up" property for I2C pins. Expanded pin configuration node example. v3: Use generic pin config properties instead of brcm-specific ones. Clarified pin types (standard, i2c, hdmi). v2: Use hyphens instead of underscore in DT property names. Device tree bindings maintainers ECG: _ _ _ _ _ __________/ \ ________/ \ _____/ \ ___/ \ ___/ \ __ \_/ \_/ \_/ \_/ \_/ Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-21 10:13:34 +08:00
reg = <0x35004800 0x430>;
// pin configuration node
dev_a_default: dev_a_active {
//group node defining 1 standard pin
grp_1 {
pins = "std_pin1";
function = "alt1";
input-schmitt-enable;
bias-disable;
slew-rate = <1>;
drive-strength = <4>;
};
// group node defining 2 I2C pins
grp_2 {
pins = "i2c_pin1", "i2c_pin2";
function = "alt2";
bias-pull-up = <720>;
input-enable;
};
// group node defining 2 HDMI pins
grp_3 {
pins = "hdmi_pin1", "hdmi_pin2";
function = "alt3";
slew-rate = <1>;
};
// other pin group nodes
...
};
// other pin configuration nodes
...
};
In the example above, "dev_a_active" is a pin configuration node with a number
of sub-nodes. In the pin group node "grp_1", one pin, "std_pin1", is defined in
the "pins" property. Thus, the remaining properties in the "grp_1" node applies
only to this pin, including the following settings:
- setting pinmux to "alt1"
- enabling schmitt-trigger (hystersis) mode
- disabling pin bias
- setting the slew-rate to 1
- setting the drive strength to 4 mA
Note that neither "input-enable" nor "input-disable" was specified - the pinctrl
subsystem will therefore leave this property unchanged from whatever state it
was in before applying these changes.
The "pins" property in the pin group node "grp_2" specifies two pins -
"i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node,
therefore, applies to both of these pins. The properties include:
- setting pinmux to "alt2"
- setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors
in parallel)
- enabling both pins' input
"slew-rate" is not specified in this pin group node, so the slew-rate for these
pins are left as-is.
Finally, "grp_3" defines two HDMI pins. The following properties are applied to
both pins:
- setting pinmux to "alt3"
- setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps
Highspeed mode
The input is neither enabled or disabled, and is left untouched.
=== Pin Names and Type ===
The following are valid pin names and their pin types:
"adcsync", Standard
"bat_rm", Standard
"bsc1_scl", I2C
"bsc1_sda", I2C
"bsc2_scl", I2C
"bsc2_sda", I2C
"classgpwr", Standard
"clk_cx8", Standard
"clkout_0", Standard
"clkout_1", Standard
"clkout_2", Standard
"clkout_3", Standard
"clkreq_in_0", Standard
"clkreq_in_1", Standard
"cws_sys_req1", Standard
"cws_sys_req2", Standard
"cws_sys_req3", Standard
"digmic1_clk", Standard
"digmic1_dq", Standard
"digmic2_clk", Standard
"digmic2_dq", Standard
"gpen13", Standard
"gpen14", Standard
"gpen15", Standard
"gpio00", Standard
"gpio01", Standard
"gpio02", Standard
"gpio03", Standard
"gpio04", Standard
"gpio05", Standard
"gpio06", Standard
"gpio07", Standard
"gpio08", Standard
"gpio09", Standard
"gpio10", Standard
"gpio11", Standard
"gpio12", Standard
"gpio13", Standard
"gpio14", Standard
"gps_pablank", Standard
"gps_tmark", Standard
"hdmi_scl", HDMI
"hdmi_sda", HDMI
"ic_dm", Standard
"ic_dp", Standard
"kp_col_ip_0", Standard
"kp_col_ip_1", Standard
"kp_col_ip_2", Standard
"kp_col_ip_3", Standard
"kp_row_op_0", Standard
"kp_row_op_1", Standard
"kp_row_op_2", Standard
"kp_row_op_3", Standard
"lcd_b_0", Standard
"lcd_b_1", Standard
"lcd_b_2", Standard
"lcd_b_3", Standard
"lcd_b_4", Standard
"lcd_b_5", Standard
"lcd_b_6", Standard
"lcd_b_7", Standard
"lcd_g_0", Standard
"lcd_g_1", Standard
"lcd_g_2", Standard
"lcd_g_3", Standard
"lcd_g_4", Standard
"lcd_g_5", Standard
"lcd_g_6", Standard
"lcd_g_7", Standard
"lcd_hsync", Standard
"lcd_oe", Standard
"lcd_pclk", Standard
"lcd_r_0", Standard
"lcd_r_1", Standard
"lcd_r_2", Standard
"lcd_r_3", Standard
"lcd_r_4", Standard
"lcd_r_5", Standard
"lcd_r_6", Standard
"lcd_r_7", Standard
"lcd_vsync", Standard
"mdmgpio0", Standard
"mdmgpio1", Standard
"mdmgpio2", Standard
"mdmgpio3", Standard
"mdmgpio4", Standard
"mdmgpio5", Standard
"mdmgpio6", Standard
"mdmgpio7", Standard
"mdmgpio8", Standard
"mphi_data_0", Standard
"mphi_data_1", Standard
"mphi_data_2", Standard
"mphi_data_3", Standard
"mphi_data_4", Standard
"mphi_data_5", Standard
"mphi_data_6", Standard
"mphi_data_7", Standard
"mphi_data_8", Standard
"mphi_data_9", Standard
"mphi_data_10", Standard
"mphi_data_11", Standard
"mphi_data_12", Standard
"mphi_data_13", Standard
"mphi_data_14", Standard
"mphi_data_15", Standard
"mphi_ha0", Standard
"mphi_hat0", Standard
"mphi_hat1", Standard
"mphi_hce0_n", Standard
"mphi_hce1_n", Standard
"mphi_hrd_n", Standard
"mphi_hwr_n", Standard
"mphi_run0", Standard
"mphi_run1", Standard
"mtx_scan_clk", Standard
"mtx_scan_data", Standard
"nand_ad_0", Standard
"nand_ad_1", Standard
"nand_ad_2", Standard
"nand_ad_3", Standard
"nand_ad_4", Standard
"nand_ad_5", Standard
"nand_ad_6", Standard
"nand_ad_7", Standard
"nand_ale", Standard
"nand_cen_0", Standard
"nand_cen_1", Standard
"nand_cle", Standard
"nand_oen", Standard
"nand_rdy_0", Standard
"nand_rdy_1", Standard
"nand_wen", Standard
"nand_wp", Standard
"pc1", Standard
"pc2", Standard
"pmu_int", Standard
"pmu_scl", I2C
"pmu_sda", I2C
"rfst2g_mtsloten3g", Standard
"rgmii_0_rx_ctl", Standard
"rgmii_0_rxc", Standard
"rgmii_0_rxd_0", Standard
"rgmii_0_rxd_1", Standard
"rgmii_0_rxd_2", Standard
"rgmii_0_rxd_3", Standard
"rgmii_0_tx_ctl", Standard
"rgmii_0_txc", Standard
"rgmii_0_txd_0", Standard
"rgmii_0_txd_1", Standard
"rgmii_0_txd_2", Standard
"rgmii_0_txd_3", Standard
"rgmii_1_rx_ctl", Standard
"rgmii_1_rxc", Standard
"rgmii_1_rxd_0", Standard
"rgmii_1_rxd_1", Standard
"rgmii_1_rxd_2", Standard
"rgmii_1_rxd_3", Standard
"rgmii_1_tx_ctl", Standard
"rgmii_1_txc", Standard
"rgmii_1_txd_0", Standard
"rgmii_1_txd_1", Standard
"rgmii_1_txd_2", Standard
"rgmii_1_txd_3", Standard
"rgmii_gpio_0", Standard
"rgmii_gpio_1", Standard
"rgmii_gpio_2", Standard
"rgmii_gpio_3", Standard
"rtxdata2g_txdata3g1", Standard
"rtxen2g_txdata3g2", Standard
"rxdata3g0", Standard
"rxdata3g1", Standard
"rxdata3g2", Standard
"sdio1_clk", Standard
"sdio1_cmd", Standard
"sdio1_data_0", Standard
"sdio1_data_1", Standard
"sdio1_data_2", Standard
"sdio1_data_3", Standard
"sdio4_clk", Standard
"sdio4_cmd", Standard
"sdio4_data_0", Standard
"sdio4_data_1", Standard
"sdio4_data_2", Standard
"sdio4_data_3", Standard
"sim_clk", Standard
"sim_data", Standard
"sim_det", Standard
"sim_resetn", Standard
"sim2_clk", Standard
"sim2_data", Standard
"sim2_det", Standard
"sim2_resetn", Standard
"sri_c", Standard
"sri_d", Standard
"sri_e", Standard
"ssp_extclk", Standard
"ssp0_clk", Standard
"ssp0_fs", Standard
"ssp0_rxd", Standard
"ssp0_txd", Standard
"ssp2_clk", Standard
"ssp2_fs_0", Standard
"ssp2_fs_1", Standard
"ssp2_fs_2", Standard
"ssp2_fs_3", Standard
"ssp2_rxd_0", Standard
"ssp2_rxd_1", Standard
"ssp2_txd_0", Standard
"ssp2_txd_1", Standard
"ssp3_clk", Standard
"ssp3_fs", Standard
"ssp3_rxd", Standard
"ssp3_txd", Standard
"ssp4_clk", Standard
"ssp4_fs", Standard
"ssp4_rxd", Standard
"ssp4_txd", Standard
"ssp5_clk", Standard
"ssp5_fs", Standard
"ssp5_rxd", Standard
"ssp5_txd", Standard
"ssp6_clk", Standard
"ssp6_fs", Standard
"ssp6_rxd", Standard
"ssp6_txd", Standard
"stat_1", Standard
"stat_2", Standard
"sysclken", Standard
"traceclk", Standard
"tracedt00", Standard
"tracedt01", Standard
"tracedt02", Standard
"tracedt03", Standard
"tracedt04", Standard
"tracedt05", Standard
"tracedt06", Standard
"tracedt07", Standard
"tracedt08", Standard
"tracedt09", Standard
"tracedt10", Standard
"tracedt11", Standard
"tracedt12", Standard
"tracedt13", Standard
"tracedt14", Standard
"tracedt15", Standard
"txdata3g0", Standard
"txpwrind", Standard
"uartb1_ucts", Standard
"uartb1_urts", Standard
"uartb1_urxd", Standard
"uartb1_utxd", Standard
"uartb2_urxd", Standard
"uartb2_utxd", Standard
"uartb3_ucts", Standard
"uartb3_urts", Standard
"uartb3_urxd", Standard
"uartb3_utxd", Standard
"uartb4_ucts", Standard
"uartb4_urts", Standard
"uartb4_urxd", Standard
"uartb4_utxd", Standard
"vc_cam1_scl", I2C
"vc_cam1_sda", I2C
"vc_cam2_scl", I2C
"vc_cam2_sda", I2C
"vc_cam3_scl", I2C
"vc_cam3_sda", I2C