2019-06-04 16:11:33 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
2007-05-06 02:45:53 +08:00
|
|
|
/*
|
|
|
|
* Copyright 2002-2005, Instant802 Networks, Inc.
|
|
|
|
* Copyright 2005-2006, Devicescape Software, Inc.
|
|
|
|
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
|
mac80211: reject/clear user rate mask if not usable
If the user rate mask results in no (basic) rates being usable,
clear it. Also, if we're already operating when it's set, reject
it instead.
Technically, selecting basic rates as the criterion is a bit too
restrictive, but calculating the usable rates over all stations
(e.g. in AP mode) is harder, and all stations must support the
basic rates. Similarly, in client mode, the basic rates will be
used anyway for control frames.
This fixes the "no supported rates (...) in rate_mask ..." warning
that occurs on TX when you've selected a rate mask that's not
compatible with the connection (e.g. an AP that enables only the
rates 36, 48, 54 and you've selected only 6, 9, 12.)
Reported-by: Kirtika Ruchandani <kirtika@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-08 18:12:10 +08:00
|
|
|
* Copyright 2017 Intel Deutschland GmbH
|
wifi: mac80211: move some future per-link data to bss_conf
To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.
Most transformations were done with the following spatch:
@@
expression sdata;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-sdata->vif.var
+sdata->vif.bss_conf.var
@@
struct ieee80211_vif *vif;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-vif->var
+vif->bss_conf.var
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-10 19:26:44 +08:00
|
|
|
* Copyright (C) 2022 Intel Corporation
|
2007-05-06 02:45:53 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
2007-07-27 21:43:23 +08:00
|
|
|
#include <linux/rtnetlink.h>
|
2011-05-27 21:12:25 +08:00
|
|
|
#include <linux/module.h>
|
2014-01-22 17:36:59 +08:00
|
|
|
#include <linux/slab.h>
|
2008-04-09 03:14:40 +08:00
|
|
|
#include "rate.h"
|
2007-05-06 02:45:53 +08:00
|
|
|
#include "ieee80211_i.h"
|
2008-09-19 00:14:18 +08:00
|
|
|
#include "debugfs.h"
|
2007-05-06 02:45:53 +08:00
|
|
|
|
|
|
|
struct rate_control_alg {
|
|
|
|
struct list_head list;
|
2014-01-21 06:29:34 +08:00
|
|
|
const struct rate_control_ops *ops;
|
2007-05-06 02:45:53 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static LIST_HEAD(rate_ctrl_algs);
|
|
|
|
static DEFINE_MUTEX(rate_ctrl_mutex);
|
|
|
|
|
2007-12-19 08:26:16 +08:00
|
|
|
static char *ieee80211_default_rc_algo = CONFIG_MAC80211_RC_DEFAULT;
|
|
|
|
module_param(ieee80211_default_rc_algo, charp, 0644);
|
|
|
|
MODULE_PARM_DESC(ieee80211_default_rc_algo,
|
|
|
|
"Default rate control algorithm for mac80211 to use");
|
|
|
|
|
2015-07-15 20:56:06 +08:00
|
|
|
void rate_control_rate_init(struct sta_info *sta)
|
|
|
|
{
|
|
|
|
struct ieee80211_local *local = sta->sdata->local;
|
|
|
|
struct rate_control_ref *ref = sta->rate_ctrl;
|
|
|
|
struct ieee80211_sta *ista = &sta->sta;
|
|
|
|
void *priv_sta = sta->rate_ctrl_priv;
|
|
|
|
struct ieee80211_supported_band *sband;
|
|
|
|
struct ieee80211_chanctx_conf *chanctx_conf;
|
|
|
|
|
2022-06-15 15:20:45 +08:00
|
|
|
ieee80211_sta_set_rx_nss(&sta->deflink);
|
2015-07-15 20:56:06 +08:00
|
|
|
|
|
|
|
if (!ref)
|
|
|
|
return;
|
|
|
|
|
|
|
|
rcu_read_lock();
|
|
|
|
|
wifi: mac80211: move some future per-link data to bss_conf
To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.
Most transformations were done with the following spatch:
@@
expression sdata;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-sdata->vif.var
+sdata->vif.bss_conf.var
@@
struct ieee80211_vif *vif;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-vif->var
+vif->bss_conf.var
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-10 19:26:44 +08:00
|
|
|
chanctx_conf = rcu_dereference(sta->sdata->vif.bss_conf.chanctx_conf);
|
2015-07-15 20:56:06 +08:00
|
|
|
if (WARN_ON(!chanctx_conf)) {
|
|
|
|
rcu_read_unlock();
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band];
|
|
|
|
|
2020-09-22 10:28:13 +08:00
|
|
|
/* TODO: check for minstrel_s1g ? */
|
|
|
|
if (sband->band == NL80211_BAND_S1GHZ) {
|
2020-10-06 00:45:22 +08:00
|
|
|
ieee80211_s1g_sta_rate_init(sta);
|
2020-09-22 10:28:13 +08:00
|
|
|
rcu_read_unlock();
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2015-07-15 20:56:06 +08:00
|
|
|
spin_lock_bh(&sta->rate_ctrl_lock);
|
|
|
|
ref->ops->rate_init(ref->priv, sband, &chanctx_conf->def, ista,
|
|
|
|
priv_sta);
|
|
|
|
spin_unlock_bh(&sta->rate_ctrl_lock);
|
|
|
|
rcu_read_unlock();
|
|
|
|
set_sta_flag(sta, WLAN_STA_RATE_CONTROL);
|
|
|
|
}
|
|
|
|
|
2017-04-26 23:11:35 +08:00
|
|
|
void rate_control_tx_status(struct ieee80211_local *local,
|
|
|
|
struct ieee80211_tx_status *st)
|
|
|
|
{
|
|
|
|
struct rate_control_ref *ref = local->rate_ctrl;
|
|
|
|
struct sta_info *sta = container_of(st->sta, struct sta_info, sta);
|
|
|
|
void *priv_sta = sta->rate_ctrl_priv;
|
2022-06-01 20:16:00 +08:00
|
|
|
struct ieee80211_supported_band *sband;
|
2017-04-26 23:11:35 +08:00
|
|
|
|
|
|
|
if (!ref || !test_sta_flag(sta, WLAN_STA_RATE_CONTROL))
|
|
|
|
return;
|
|
|
|
|
2022-06-01 20:16:00 +08:00
|
|
|
sband = local->hw.wiphy->bands[st->info->band];
|
|
|
|
|
2017-04-26 23:11:35 +08:00
|
|
|
spin_lock_bh(&sta->rate_ctrl_lock);
|
|
|
|
if (ref->ops->tx_status_ext)
|
|
|
|
ref->ops->tx_status_ext(ref->priv, sband, priv_sta, st);
|
|
|
|
else if (st->skb)
|
|
|
|
ref->ops->tx_status(ref->priv, sband, st->sta, priv_sta, st->skb);
|
|
|
|
else
|
|
|
|
WARN_ON_ONCE(1);
|
|
|
|
|
|
|
|
spin_unlock_bh(&sta->rate_ctrl_lock);
|
|
|
|
}
|
|
|
|
|
2015-07-15 20:56:06 +08:00
|
|
|
void rate_control_rate_update(struct ieee80211_local *local,
|
2022-05-31 00:35:23 +08:00
|
|
|
struct ieee80211_supported_band *sband,
|
|
|
|
struct sta_info *sta, unsigned int link_id,
|
|
|
|
u32 changed)
|
2015-07-15 20:56:06 +08:00
|
|
|
{
|
|
|
|
struct rate_control_ref *ref = local->rate_ctrl;
|
|
|
|
struct ieee80211_sta *ista = &sta->sta;
|
|
|
|
void *priv_sta = sta->rate_ctrl_priv;
|
|
|
|
struct ieee80211_chanctx_conf *chanctx_conf;
|
|
|
|
|
2022-05-31 00:35:23 +08:00
|
|
|
WARN_ON(link_id != 0);
|
|
|
|
|
2015-07-15 20:56:06 +08:00
|
|
|
if (ref && ref->ops->rate_update) {
|
|
|
|
rcu_read_lock();
|
|
|
|
|
wifi: mac80211: move some future per-link data to bss_conf
To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.
Most transformations were done with the following spatch:
@@
expression sdata;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-sdata->vif.var
+sdata->vif.bss_conf.var
@@
struct ieee80211_vif *vif;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-vif->var
+vif->bss_conf.var
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-10 19:26:44 +08:00
|
|
|
chanctx_conf = rcu_dereference(sta->sdata->vif.bss_conf.chanctx_conf);
|
2015-07-15 20:56:06 +08:00
|
|
|
if (WARN_ON(!chanctx_conf)) {
|
|
|
|
rcu_read_unlock();
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_bh(&sta->rate_ctrl_lock);
|
|
|
|
ref->ops->rate_update(ref->priv, sband, &chanctx_conf->def,
|
|
|
|
ista, priv_sta, changed);
|
|
|
|
spin_unlock_bh(&sta->rate_ctrl_lock);
|
|
|
|
rcu_read_unlock();
|
|
|
|
}
|
2022-05-31 00:35:23 +08:00
|
|
|
|
2015-07-15 20:56:06 +08:00
|
|
|
drv_sta_rc_update(local, sta->sdata, &sta->sta, changed);
|
|
|
|
}
|
|
|
|
|
2014-01-21 06:29:34 +08:00
|
|
|
int ieee80211_rate_control_register(const struct rate_control_ops *ops)
|
2007-05-06 02:45:53 +08:00
|
|
|
{
|
|
|
|
struct rate_control_alg *alg;
|
|
|
|
|
2007-10-28 21:17:44 +08:00
|
|
|
if (!ops->name)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2007-10-28 21:49:33 +08:00
|
|
|
mutex_lock(&rate_ctrl_mutex);
|
|
|
|
list_for_each_entry(alg, &rate_ctrl_algs, list) {
|
|
|
|
if (!strcmp(alg->ops->name, ops->name)) {
|
|
|
|
/* don't register an algorithm twice */
|
|
|
|
WARN_ON(1);
|
2007-12-14 07:52:11 +08:00
|
|
|
mutex_unlock(&rate_ctrl_mutex);
|
2007-10-28 21:49:33 +08:00
|
|
|
return -EALREADY;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
some kmalloc/memset ->kzalloc (tree wide)
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).
Here is a short excerpt of the semantic patch performing
this transformation:
@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@
x =
- kmalloc
+ kzalloc
(E1,E2)
... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);
@@
expression E1,E2,E3;
@@
- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)
[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:49:03 +08:00
|
|
|
alg = kzalloc(sizeof(*alg), GFP_KERNEL);
|
2007-05-06 02:45:53 +08:00
|
|
|
if (alg == NULL) {
|
2007-10-28 21:49:33 +08:00
|
|
|
mutex_unlock(&rate_ctrl_mutex);
|
2007-05-06 02:45:53 +08:00
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
alg->ops = ops;
|
|
|
|
|
|
|
|
list_add_tail(&alg->list, &rate_ctrl_algs);
|
|
|
|
mutex_unlock(&rate_ctrl_mutex);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_rate_control_register);
|
|
|
|
|
2014-01-21 06:29:34 +08:00
|
|
|
void ieee80211_rate_control_unregister(const struct rate_control_ops *ops)
|
2007-05-06 02:45:53 +08:00
|
|
|
{
|
|
|
|
struct rate_control_alg *alg;
|
|
|
|
|
|
|
|
mutex_lock(&rate_ctrl_mutex);
|
|
|
|
list_for_each_entry(alg, &rate_ctrl_algs, list) {
|
|
|
|
if (alg->ops == ops) {
|
|
|
|
list_del(&alg->list);
|
2007-12-14 08:17:03 +08:00
|
|
|
kfree(alg);
|
2007-05-06 02:45:53 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
mutex_unlock(&rate_ctrl_mutex);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_rate_control_unregister);
|
|
|
|
|
2014-01-21 06:29:34 +08:00
|
|
|
static const struct rate_control_ops *
|
2007-05-06 02:45:53 +08:00
|
|
|
ieee80211_try_rate_control_ops_get(const char *name)
|
|
|
|
{
|
|
|
|
struct rate_control_alg *alg;
|
2014-01-21 06:29:34 +08:00
|
|
|
const struct rate_control_ops *ops = NULL;
|
2007-05-06 02:45:53 +08:00
|
|
|
|
2007-10-28 21:17:44 +08:00
|
|
|
if (!name)
|
|
|
|
return NULL;
|
|
|
|
|
2007-05-06 02:45:53 +08:00
|
|
|
mutex_lock(&rate_ctrl_mutex);
|
|
|
|
list_for_each_entry(alg, &rate_ctrl_algs, list) {
|
2014-01-22 17:36:59 +08:00
|
|
|
if (!strcmp(alg->ops->name, name)) {
|
|
|
|
ops = alg->ops;
|
|
|
|
break;
|
|
|
|
}
|
2007-05-06 02:45:53 +08:00
|
|
|
}
|
|
|
|
mutex_unlock(&rate_ctrl_mutex);
|
|
|
|
return ops;
|
|
|
|
}
|
|
|
|
|
2007-12-19 08:26:16 +08:00
|
|
|
/* Get the rate control algorithm. */
|
2014-01-21 06:29:34 +08:00
|
|
|
static const struct rate_control_ops *
|
2007-05-06 02:45:53 +08:00
|
|
|
ieee80211_rate_control_ops_get(const char *name)
|
|
|
|
{
|
2014-01-21 06:29:34 +08:00
|
|
|
const struct rate_control_ops *ops;
|
2007-12-19 08:26:16 +08:00
|
|
|
const char *alg_name;
|
2007-05-06 02:45:53 +08:00
|
|
|
|
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
|
|
|
kernel_param_lock(THIS_MODULE);
|
2007-10-28 21:17:44 +08:00
|
|
|
if (!name)
|
2007-12-19 08:26:16 +08:00
|
|
|
alg_name = ieee80211_default_rc_algo;
|
|
|
|
else
|
|
|
|
alg_name = name;
|
2007-10-28 21:17:44 +08:00
|
|
|
|
2007-12-19 08:26:16 +08:00
|
|
|
ops = ieee80211_try_rate_control_ops_get(alg_name);
|
|
|
|
if (!ops && name)
|
|
|
|
/* try default if specific alg requested but not found */
|
|
|
|
ops = ieee80211_try_rate_control_ops_get(ieee80211_default_rc_algo);
|
|
|
|
|
2017-04-07 07:31:41 +08:00
|
|
|
/* Note: check for > 0 is intentional to avoid clang warning */
|
|
|
|
if (!ops && (strlen(CONFIG_MAC80211_RC_DEFAULT) > 0))
|
|
|
|
/* try built-in one if specific alg requested but not found */
|
2008-01-02 22:17:03 +08:00
|
|
|
ops = ieee80211_try_rate_control_ops_get(CONFIG_MAC80211_RC_DEFAULT);
|
2017-04-07 07:31:41 +08:00
|
|
|
|
module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).
The kernel param code currently uses a single mutex to protect
modification of any and all kernel params. While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg(). If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.
This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params. All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.
This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex. They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-17 04:48:52 +08:00
|
|
|
kernel_param_unlock(THIS_MODULE);
|
2008-01-02 22:17:03 +08:00
|
|
|
|
2007-05-06 02:45:53 +08:00
|
|
|
return ops;
|
|
|
|
}
|
|
|
|
|
2008-09-19 00:14:18 +08:00
|
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
|
|
static ssize_t rcname_read(struct file *file, char __user *userbuf,
|
|
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
|
|
struct rate_control_ref *ref = file->private_data;
|
|
|
|
int len = strlen(ref->ops->name);
|
|
|
|
|
|
|
|
return simple_read_from_buffer(userbuf, count, ppos,
|
|
|
|
ref->ops->name, len);
|
|
|
|
}
|
|
|
|
|
2020-04-23 17:13:49 +08:00
|
|
|
const struct file_operations rcname_ops = {
|
2008-09-19 00:14:18 +08:00
|
|
|
.read = rcname_read,
|
2012-04-06 05:25:11 +08:00
|
|
|
.open = simple_open,
|
llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
|
|
|
.llseek = default_llseek,
|
2008-09-19 00:14:18 +08:00
|
|
|
};
|
|
|
|
#endif
|
|
|
|
|
2020-04-23 17:13:49 +08:00
|
|
|
static struct rate_control_ref *
|
|
|
|
rate_control_alloc(const char *name, struct ieee80211_local *local)
|
2007-05-06 02:45:53 +08:00
|
|
|
{
|
|
|
|
struct rate_control_ref *ref;
|
|
|
|
|
|
|
|
ref = kmalloc(sizeof(struct rate_control_ref), GFP_KERNEL);
|
|
|
|
if (!ref)
|
2014-01-22 17:36:59 +08:00
|
|
|
return NULL;
|
2007-05-06 02:45:53 +08:00
|
|
|
ref->ops = ieee80211_rate_control_ops_get(name);
|
|
|
|
if (!ref->ops)
|
2014-01-22 17:36:59 +08:00
|
|
|
goto free;
|
2008-09-19 00:14:18 +08:00
|
|
|
|
2020-04-23 17:13:49 +08:00
|
|
|
ref->priv = ref->ops->alloc(&local->hw);
|
2007-05-06 02:45:53 +08:00
|
|
|
if (!ref->priv)
|
2014-01-22 17:36:59 +08:00
|
|
|
goto free;
|
2007-05-06 02:45:53 +08:00
|
|
|
return ref;
|
|
|
|
|
2014-01-22 17:36:59 +08:00
|
|
|
free:
|
2007-05-06 02:45:53 +08:00
|
|
|
kfree(ref);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2017-02-15 22:02:07 +08:00
|
|
|
static void rate_control_free(struct ieee80211_local *local,
|
|
|
|
struct rate_control_ref *ctrl_ref)
|
2007-05-06 02:45:53 +08:00
|
|
|
{
|
|
|
|
ctrl_ref->ops->free(ctrl_ref->priv);
|
2008-09-19 00:14:18 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
2017-02-15 22:02:07 +08:00
|
|
|
debugfs_remove_recursive(local->debugfs.rcdir);
|
|
|
|
local->debugfs.rcdir = NULL;
|
2008-09-19 00:14:18 +08:00
|
|
|
#endif
|
|
|
|
|
2007-05-06 02:45:53 +08:00
|
|
|
kfree(ctrl_ref);
|
|
|
|
}
|
|
|
|
|
2022-07-11 21:13:20 +08:00
|
|
|
void ieee80211_check_rate_mask(struct ieee80211_link_data *link)
|
mac80211: reject/clear user rate mask if not usable
If the user rate mask results in no (basic) rates being usable,
clear it. Also, if we're already operating when it's set, reject
it instead.
Technically, selecting basic rates as the criterion is a bit too
restrictive, but calculating the usable rates over all stations
(e.g. in AP mode) is harder, and all stations must support the
basic rates. Similarly, in client mode, the basic rates will be
used anyway for control frames.
This fixes the "no supported rates (...) in rate_mask ..." warning
that occurs on TX when you've selected a rate mask that's not
compatible with the connection (e.g. an AP that enables only the
rates 36, 48, 54 and you've selected only 6, 9, 12.)
Reported-by: Kirtika Ruchandani <kirtika@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-08 18:12:10 +08:00
|
|
|
{
|
2022-07-11 21:13:20 +08:00
|
|
|
struct ieee80211_sub_if_data *sdata = link->sdata;
|
mac80211: reject/clear user rate mask if not usable
If the user rate mask results in no (basic) rates being usable,
clear it. Also, if we're already operating when it's set, reject
it instead.
Technically, selecting basic rates as the criterion is a bit too
restrictive, but calculating the usable rates over all stations
(e.g. in AP mode) is harder, and all stations must support the
basic rates. Similarly, in client mode, the basic rates will be
used anyway for control frames.
This fixes the "no supported rates (...) in rate_mask ..." warning
that occurs on TX when you've selected a rate mask that's not
compatible with the connection (e.g. an AP that enables only the
rates 36, 48, 54 and you've selected only 6, 9, 12.)
Reported-by: Kirtika Ruchandani <kirtika@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-08 18:12:10 +08:00
|
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
struct ieee80211_supported_band *sband;
|
2022-07-11 21:13:20 +08:00
|
|
|
u32 user_mask, basic_rates = link->conf->basic_rates;
|
mac80211: reject/clear user rate mask if not usable
If the user rate mask results in no (basic) rates being usable,
clear it. Also, if we're already operating when it's set, reject
it instead.
Technically, selecting basic rates as the criterion is a bit too
restrictive, but calculating the usable rates over all stations
(e.g. in AP mode) is harder, and all stations must support the
basic rates. Similarly, in client mode, the basic rates will be
used anyway for control frames.
This fixes the "no supported rates (...) in rate_mask ..." warning
that occurs on TX when you've selected a rate mask that's not
compatible with the connection (e.g. an AP that enables only the
rates 36, 48, 54 and you've selected only 6, 9, 12.)
Reported-by: Kirtika Ruchandani <kirtika@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-08 18:12:10 +08:00
|
|
|
enum nl80211_band band;
|
|
|
|
|
2022-07-11 21:13:20 +08:00
|
|
|
if (WARN_ON(!link->conf->chandef.chan))
|
mac80211: reject/clear user rate mask if not usable
If the user rate mask results in no (basic) rates being usable,
clear it. Also, if we're already operating when it's set, reject
it instead.
Technically, selecting basic rates as the criterion is a bit too
restrictive, but calculating the usable rates over all stations
(e.g. in AP mode) is harder, and all stations must support the
basic rates. Similarly, in client mode, the basic rates will be
used anyway for control frames.
This fixes the "no supported rates (...) in rate_mask ..." warning
that occurs on TX when you've selected a rate mask that's not
compatible with the connection (e.g. an AP that enables only the
rates 36, 48, 54 and you've selected only 6, 9, 12.)
Reported-by: Kirtika Ruchandani <kirtika@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-08 18:12:10 +08:00
|
|
|
return;
|
|
|
|
|
2022-07-11 21:13:20 +08:00
|
|
|
band = link->conf->chandef.chan->band;
|
2020-09-22 10:28:12 +08:00
|
|
|
if (band == NL80211_BAND_S1GHZ) {
|
|
|
|
/* TODO */
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
mac80211: reject/clear user rate mask if not usable
If the user rate mask results in no (basic) rates being usable,
clear it. Also, if we're already operating when it's set, reject
it instead.
Technically, selecting basic rates as the criterion is a bit too
restrictive, but calculating the usable rates over all stations
(e.g. in AP mode) is harder, and all stations must support the
basic rates. Similarly, in client mode, the basic rates will be
used anyway for control frames.
This fixes the "no supported rates (...) in rate_mask ..." warning
that occurs on TX when you've selected a rate mask that's not
compatible with the connection (e.g. an AP that enables only the
rates 36, 48, 54 and you've selected only 6, 9, 12.)
Reported-by: Kirtika Ruchandani <kirtika@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-08 18:12:10 +08:00
|
|
|
if (WARN_ON_ONCE(!basic_rates))
|
|
|
|
return;
|
|
|
|
|
|
|
|
user_mask = sdata->rc_rateidx_mask[band];
|
|
|
|
sband = local->hw.wiphy->bands[band];
|
|
|
|
|
|
|
|
if (user_mask & basic_rates)
|
|
|
|
return;
|
|
|
|
|
|
|
|
sdata_dbg(sdata,
|
|
|
|
"no overlap between basic rates (0x%x) and user mask (0x%x on band %d) - clearing the latter",
|
|
|
|
basic_rates, user_mask, band);
|
|
|
|
sdata->rc_rateidx_mask[band] = (1 << sband->n_bitrates) - 1;
|
|
|
|
}
|
|
|
|
|
2011-09-29 23:04:04 +08:00
|
|
|
static bool rc_no_data_or_no_ack_use_min(struct ieee80211_tx_rate_control *txrc)
|
2009-07-17 01:05:41 +08:00
|
|
|
{
|
|
|
|
struct sk_buff *skb = txrc->skb;
|
|
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
|
|
|
2011-09-29 23:04:04 +08:00
|
|
|
return (info->flags & (IEEE80211_TX_CTL_NO_ACK |
|
|
|
|
IEEE80211_TX_CTL_USE_MINRATE)) ||
|
2021-05-19 20:20:19 +08:00
|
|
|
!ieee80211_is_tx_data(skb);
|
2009-07-17 01:05:41 +08:00
|
|
|
}
|
|
|
|
|
2020-09-22 10:28:12 +08:00
|
|
|
static void rc_send_low_basicrate(struct ieee80211_tx_rate *rate,
|
|
|
|
u32 basic_rates,
|
2010-11-11 22:07:23 +08:00
|
|
|
struct ieee80211_supported_band *sband)
|
2009-12-29 18:59:19 +08:00
|
|
|
{
|
|
|
|
u8 i;
|
|
|
|
|
2020-09-22 10:28:12 +08:00
|
|
|
if (sband->band == NL80211_BAND_S1GHZ) {
|
|
|
|
/* TODO */
|
|
|
|
rate->flags |= IEEE80211_TX_RC_S1G_MCS;
|
|
|
|
rate->idx = 0;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2009-12-29 18:59:19 +08:00
|
|
|
if (basic_rates == 0)
|
|
|
|
return; /* assume basic rates unknown and accept rate */
|
2020-09-22 10:28:12 +08:00
|
|
|
if (rate->idx < 0)
|
2009-12-29 18:59:19 +08:00
|
|
|
return;
|
2020-09-22 10:28:12 +08:00
|
|
|
if (basic_rates & (1 << rate->idx))
|
2009-12-29 18:59:19 +08:00
|
|
|
return; /* selected rate is a basic rate */
|
|
|
|
|
2020-09-22 10:28:12 +08:00
|
|
|
for (i = rate->idx + 1; i <= sband->n_bitrates; i++) {
|
2009-12-29 18:59:19 +08:00
|
|
|
if (basic_rates & (1 << i)) {
|
2020-09-22 10:28:12 +08:00
|
|
|
rate->idx = i;
|
2009-12-29 18:59:19 +08:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* could not find a basic rate; use original selection */
|
|
|
|
}
|
|
|
|
|
2013-07-08 22:55:53 +08:00
|
|
|
static void __rate_control_send_low(struct ieee80211_hw *hw,
|
|
|
|
struct ieee80211_supported_band *sband,
|
|
|
|
struct ieee80211_sta *sta,
|
2013-10-14 17:04:28 +08:00
|
|
|
struct ieee80211_tx_info *info,
|
|
|
|
u32 rate_mask)
|
2011-09-25 17:23:31 +08:00
|
|
|
{
|
|
|
|
int i;
|
2013-07-08 22:55:53 +08:00
|
|
|
u32 rate_flags =
|
|
|
|
ieee80211_chandef_rate_flags(&hw->conf.chandef);
|
2011-09-25 17:23:31 +08:00
|
|
|
|
2020-09-22 10:28:12 +08:00
|
|
|
if (sband->band == NL80211_BAND_S1GHZ) {
|
|
|
|
info->control.rates[0].flags |= IEEE80211_TX_RC_S1G_MCS;
|
|
|
|
info->control.rates[0].idx = 0;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2016-04-12 21:56:15 +08:00
|
|
|
if ((sband->band == NL80211_BAND_2GHZ) &&
|
2013-07-08 22:55:53 +08:00
|
|
|
(info->flags & IEEE80211_TX_CTL_NO_CCK_RATE))
|
|
|
|
rate_flags |= IEEE80211_RATE_ERP_G;
|
|
|
|
|
|
|
|
info->control.rates[0].idx = 0;
|
2011-09-25 17:23:31 +08:00
|
|
|
for (i = 0; i < sband->n_bitrates; i++) {
|
2013-10-14 17:04:28 +08:00
|
|
|
if (!(rate_mask & BIT(i)))
|
|
|
|
continue;
|
|
|
|
|
2013-10-14 16:46:55 +08:00
|
|
|
if ((rate_flags & sband->bitrates[i].flags) != rate_flags)
|
|
|
|
continue;
|
|
|
|
|
2013-07-08 22:55:53 +08:00
|
|
|
if (!rate_supported(sta, sband->band, i))
|
2011-09-25 17:23:31 +08:00
|
|
|
continue;
|
|
|
|
|
2013-07-08 22:55:53 +08:00
|
|
|
info->control.rates[0].idx = i;
|
|
|
|
break;
|
2011-09-25 17:23:31 +08:00
|
|
|
}
|
2015-09-23 20:02:47 +08:00
|
|
|
WARN_ONCE(i == sband->n_bitrates,
|
2019-05-29 20:25:37 +08:00
|
|
|
"no supported rates for sta %pM (0x%x, band %d) in rate_mask 0x%x with flags 0x%x\n",
|
|
|
|
sta ? sta->addr : NULL,
|
mac80211: prepare sta handling for MLO support
Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee80211_sta
part of it.
With MLO (Multi Link Operation) support being added
in 802.11be standard, though the association is logically
with a single Multi Link capable STA, at the physical level
communication can happen via different advertised
links (uniquely identified by Channel, operating class,
BSSID) and hence the need to handle multiple link
STA parameters within a composite sta_info object
called the MLD STA. The different link STA part of
MLD STA are identified using the link address which can
be same or different as the MLD STA address and unique
link id based on the link vif.
To support extension of such a model, the sta_info
datastructure is modified to hold multiple link STA
objects with link specific params currently within
sta_info moved to this new structure. Similarly this is
done for ieee80211_sta as well which will be accessed
within mac80211 as well as by drivers, hence trivial
driver changes are expected to support this.
For current non MLO supported drivers, only one link STA
is present and link information is accessed via 'deflink'
member.
For MLO drivers, we still need to define the APIs etc. to
get the correct link ID and access the correct part of
the station info.
Currently in mac80211, all link STA info are accessed directly
via deflink. These will be updated to access via link pointers
indexed by link id with MLO support patches, with link id
being 0 for non MLO supported cases.
Except for couple of macro related changes, below spatch takes
care of updating mac80211 and driver code to access to the
link STA info via deflink.
@ieee80211_sta@
struct ieee80211_sta *s;
struct sta_info *si;
identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr};
@@
(
s->
- var
+ deflink.var
|
si->sta.
- var
+ deflink.var
)
@sta_info@
struct sta_info *si;
identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth};
@@
(
si->
- var
+ deflink.var
)
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com
[remove MLO-drivers notes from commit message, not clear yet; run spatch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-04 23:41:23 +08:00
|
|
|
sta ? sta->deflink.supp_rates[sband->band] : -1,
|
2019-05-29 20:25:37 +08:00
|
|
|
sband->band,
|
2015-09-23 20:02:47 +08:00
|
|
|
rate_mask, rate_flags);
|
2013-04-22 22:14:41 +08:00
|
|
|
|
|
|
|
info->control.rates[0].count =
|
|
|
|
(info->flags & IEEE80211_TX_CTL_NO_ACK) ?
|
|
|
|
1 : hw->max_rate_tries;
|
|
|
|
|
|
|
|
info->control.skip_table = 1;
|
|
|
|
}
|
|
|
|
|
2011-09-25 17:23:31 +08:00
|
|
|
|
2019-05-16 17:44:52 +08:00
|
|
|
static bool rate_control_send_low(struct ieee80211_sta *pubsta,
|
|
|
|
struct ieee80211_tx_rate_control *txrc)
|
2009-07-17 01:05:41 +08:00
|
|
|
{
|
|
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb);
|
2010-11-23 03:58:24 +08:00
|
|
|
struct ieee80211_supported_band *sband = txrc->sband;
|
2013-08-07 06:39:56 +08:00
|
|
|
struct sta_info *sta;
|
2010-11-23 03:58:24 +08:00
|
|
|
int mcast_rate;
|
2013-08-07 06:39:56 +08:00
|
|
|
bool use_basicrate = false;
|
2009-07-17 01:05:41 +08:00
|
|
|
|
2019-05-16 17:44:52 +08:00
|
|
|
if (!pubsta || rc_no_data_or_no_ack_use_min(txrc)) {
|
2013-10-14 17:04:28 +08:00
|
|
|
__rate_control_send_low(txrc->hw, sband, pubsta, info,
|
|
|
|
txrc->rate_idx_mask);
|
2013-04-22 22:14:41 +08:00
|
|
|
|
2013-08-07 06:39:56 +08:00
|
|
|
if (!pubsta && txrc->bss) {
|
2010-11-23 03:58:24 +08:00
|
|
|
mcast_rate = txrc->bss_conf->mcast_rate[sband->band];
|
|
|
|
if (mcast_rate > 0) {
|
|
|
|
info->control.rates[0].idx = mcast_rate - 1;
|
|
|
|
return true;
|
|
|
|
}
|
2013-08-07 06:39:56 +08:00
|
|
|
use_basicrate = true;
|
|
|
|
} else if (pubsta) {
|
|
|
|
sta = container_of(pubsta, struct sta_info, sta);
|
|
|
|
if (ieee80211_vif_is_mesh(&sta->sdata->vif))
|
|
|
|
use_basicrate = true;
|
|
|
|
}
|
2010-11-23 03:58:24 +08:00
|
|
|
|
2013-08-07 06:39:56 +08:00
|
|
|
if (use_basicrate)
|
2020-09-22 10:28:12 +08:00
|
|
|
rc_send_low_basicrate(&info->control.rates[0],
|
2009-12-29 18:59:19 +08:00
|
|
|
txrc->bss_conf->basic_rates,
|
2010-11-23 03:58:24 +08:00
|
|
|
sband);
|
2013-08-07 06:39:56 +08:00
|
|
|
|
2009-07-17 01:05:41 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2015-08-07 05:47:31 +08:00
|
|
|
static bool rate_idx_match_legacy_mask(s8 *rate_idx, int n_bitrates, u32 mask)
|
2010-01-06 19:09:08 +08:00
|
|
|
{
|
|
|
|
int j;
|
|
|
|
|
|
|
|
/* See whether the selected rate or anything below it is allowed. */
|
2015-08-07 05:47:31 +08:00
|
|
|
for (j = *rate_idx; j >= 0; j--) {
|
2010-01-06 19:09:08 +08:00
|
|
|
if (mask & (1 << j)) {
|
|
|
|
/* Okay, found a suitable rate. Use it. */
|
2015-08-07 05:47:31 +08:00
|
|
|
*rate_idx = j;
|
2012-01-29 00:25:33 +08:00
|
|
|
return true;
|
2010-01-06 19:09:08 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Try to find a higher rate that would be allowed */
|
2015-08-07 05:47:31 +08:00
|
|
|
for (j = *rate_idx + 1; j < n_bitrates; j++) {
|
2010-01-06 19:09:08 +08:00
|
|
|
if (mask & (1 << j)) {
|
|
|
|
/* Okay, found a suitable rate. Use it. */
|
2015-08-07 05:47:31 +08:00
|
|
|
*rate_idx = j;
|
2012-01-29 00:25:33 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2015-08-07 05:47:31 +08:00
|
|
|
static bool rate_idx_match_mcs_mask(s8 *rate_idx, u8 *mcs_mask)
|
2012-01-29 00:25:33 +08:00
|
|
|
{
|
|
|
|
int i, j;
|
|
|
|
int ridx, rbit;
|
|
|
|
|
2015-08-07 05:47:31 +08:00
|
|
|
ridx = *rate_idx / 8;
|
|
|
|
rbit = *rate_idx % 8;
|
2012-01-29 00:25:33 +08:00
|
|
|
|
|
|
|
/* sanity check */
|
2012-02-01 15:42:11 +08:00
|
|
|
if (ridx < 0 || ridx >= IEEE80211_HT_MCS_MASK_LEN)
|
2012-01-29 00:25:33 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
/* See whether the selected rate or anything below it is allowed. */
|
|
|
|
for (i = ridx; i >= 0; i--) {
|
|
|
|
for (j = rbit; j >= 0; j--)
|
|
|
|
if (mcs_mask[i] & BIT(j)) {
|
2015-08-07 05:47:31 +08:00
|
|
|
*rate_idx = i * 8 + j;
|
2012-01-29 00:25:33 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
rbit = 7;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Try to find a higher rate that would be allowed */
|
2015-08-07 05:47:31 +08:00
|
|
|
ridx = (*rate_idx + 1) / 8;
|
|
|
|
rbit = (*rate_idx + 1) % 8;
|
2012-01-29 00:25:33 +08:00
|
|
|
|
|
|
|
for (i = ridx; i < IEEE80211_HT_MCS_MASK_LEN; i++) {
|
|
|
|
for (j = rbit; j < 8; j++)
|
|
|
|
if (mcs_mask[i] & BIT(j)) {
|
2015-08-07 05:47:31 +08:00
|
|
|
*rate_idx = i * 8 + j;
|
2012-01-29 00:25:33 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
rbit = 0;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2015-08-07 05:47:33 +08:00
|
|
|
static bool rate_idx_match_vht_mcs_mask(s8 *rate_idx, u16 *vht_mask)
|
|
|
|
{
|
|
|
|
int i, j;
|
|
|
|
int ridx, rbit;
|
|
|
|
|
|
|
|
ridx = *rate_idx >> 4;
|
|
|
|
rbit = *rate_idx & 0xf;
|
|
|
|
|
|
|
|
if (ridx < 0 || ridx >= NL80211_VHT_NSS_MAX)
|
|
|
|
return false;
|
2012-01-29 00:25:33 +08:00
|
|
|
|
2015-08-07 05:47:33 +08:00
|
|
|
/* See whether the selected rate or anything below it is allowed. */
|
|
|
|
for (i = ridx; i >= 0; i--) {
|
|
|
|
for (j = rbit; j >= 0; j--) {
|
|
|
|
if (vht_mask[i] & BIT(j)) {
|
|
|
|
*rate_idx = (i << 4) | j;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
rbit = 15;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Try to find a higher rate that would be allowed */
|
|
|
|
ridx = (*rate_idx + 1) >> 4;
|
|
|
|
rbit = (*rate_idx + 1) & 0xf;
|
|
|
|
|
|
|
|
for (i = ridx; i < NL80211_VHT_NSS_MAX; i++) {
|
|
|
|
for (j = rbit; j < 16; j++) {
|
|
|
|
if (vht_mask[i] & BIT(j)) {
|
|
|
|
*rate_idx = (i << 4) | j;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
rbit = 0;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
2012-01-29 00:25:33 +08:00
|
|
|
|
2015-08-07 05:47:31 +08:00
|
|
|
static void rate_idx_match_mask(s8 *rate_idx, u16 *rate_flags,
|
2013-04-22 22:14:41 +08:00
|
|
|
struct ieee80211_supported_band *sband,
|
|
|
|
enum nl80211_chan_width chan_width,
|
2012-01-29 00:25:33 +08:00
|
|
|
u32 mask,
|
2015-08-07 05:47:33 +08:00
|
|
|
u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN],
|
|
|
|
u16 vht_mask[NL80211_VHT_NSS_MAX])
|
2012-01-29 00:25:33 +08:00
|
|
|
{
|
2015-08-07 05:47:33 +08:00
|
|
|
if (*rate_flags & IEEE80211_TX_RC_VHT_MCS) {
|
|
|
|
/* handle VHT rates */
|
|
|
|
if (rate_idx_match_vht_mcs_mask(rate_idx, vht_mask))
|
|
|
|
return;
|
|
|
|
|
|
|
|
*rate_idx = 0;
|
|
|
|
/* keep protection flags */
|
|
|
|
*rate_flags &= (IEEE80211_TX_RC_USE_RTS_CTS |
|
|
|
|
IEEE80211_TX_RC_USE_CTS_PROTECT |
|
|
|
|
IEEE80211_TX_RC_USE_SHORT_PREAMBLE);
|
|
|
|
|
|
|
|
*rate_flags |= IEEE80211_TX_RC_MCS;
|
|
|
|
if (chan_width == NL80211_CHAN_WIDTH_40)
|
|
|
|
*rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
|
|
|
|
|
|
|
|
if (rate_idx_match_mcs_mask(rate_idx, mcs_mask))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* also try the legacy rates. */
|
|
|
|
*rate_flags &= ~(IEEE80211_TX_RC_MCS |
|
|
|
|
IEEE80211_TX_RC_40_MHZ_WIDTH);
|
|
|
|
if (rate_idx_match_legacy_mask(rate_idx, sband->n_bitrates,
|
|
|
|
mask))
|
|
|
|
return;
|
|
|
|
} else if (*rate_flags & IEEE80211_TX_RC_MCS) {
|
|
|
|
/* handle HT rates */
|
2015-08-07 05:47:31 +08:00
|
|
|
if (rate_idx_match_mcs_mask(rate_idx, mcs_mask))
|
2012-01-29 00:25:33 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
/* also try the legacy rates. */
|
2015-08-07 05:47:31 +08:00
|
|
|
*rate_idx = 0;
|
2012-01-29 00:25:33 +08:00
|
|
|
/* keep protection flags */
|
2015-08-07 05:47:31 +08:00
|
|
|
*rate_flags &= (IEEE80211_TX_RC_USE_RTS_CTS |
|
|
|
|
IEEE80211_TX_RC_USE_CTS_PROTECT |
|
|
|
|
IEEE80211_TX_RC_USE_SHORT_PREAMBLE);
|
|
|
|
if (rate_idx_match_legacy_mask(rate_idx, sband->n_bitrates,
|
|
|
|
mask))
|
2012-01-29 00:25:33 +08:00
|
|
|
return;
|
2015-08-07 05:47:33 +08:00
|
|
|
} else {
|
2012-01-29 00:25:33 +08:00
|
|
|
/* handle legacy rates */
|
2015-08-07 05:47:31 +08:00
|
|
|
if (rate_idx_match_legacy_mask(rate_idx, sband->n_bitrates,
|
|
|
|
mask))
|
2012-01-29 00:25:33 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
/* if HT BSS, and we handle a data frame, also try HT rates */
|
2013-05-16 19:00:31 +08:00
|
|
|
switch (chan_width) {
|
|
|
|
case NL80211_CHAN_WIDTH_20_NOHT:
|
|
|
|
case NL80211_CHAN_WIDTH_5:
|
|
|
|
case NL80211_CHAN_WIDTH_10:
|
2012-01-29 00:25:33 +08:00
|
|
|
return;
|
2013-05-16 19:00:31 +08:00
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
2012-01-29 00:25:33 +08:00
|
|
|
|
2015-08-07 05:47:31 +08:00
|
|
|
*rate_idx = 0;
|
2012-01-29 00:25:33 +08:00
|
|
|
/* keep protection flags */
|
2015-08-07 05:47:31 +08:00
|
|
|
*rate_flags &= (IEEE80211_TX_RC_USE_RTS_CTS |
|
|
|
|
IEEE80211_TX_RC_USE_CTS_PROTECT |
|
|
|
|
IEEE80211_TX_RC_USE_SHORT_PREAMBLE);
|
2012-01-29 00:25:33 +08:00
|
|
|
|
2015-08-07 05:47:31 +08:00
|
|
|
*rate_flags |= IEEE80211_TX_RC_MCS;
|
2012-01-29 00:25:33 +08:00
|
|
|
|
2013-04-22 22:14:41 +08:00
|
|
|
if (chan_width == NL80211_CHAN_WIDTH_40)
|
2015-08-07 05:47:31 +08:00
|
|
|
*rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
|
2012-01-29 00:25:33 +08:00
|
|
|
|
2015-08-07 05:47:31 +08:00
|
|
|
if (rate_idx_match_mcs_mask(rate_idx, mcs_mask))
|
2010-01-06 19:09:08 +08:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Uh.. No suitable rate exists. This should not really happen with
|
|
|
|
* sane TX rate mask configurations. However, should someone manage to
|
|
|
|
* configure supported rates and TX rate mask in incompatible way,
|
|
|
|
* allow the frame to be transmitted with whatever the rate control
|
|
|
|
* selected.
|
|
|
|
*/
|
|
|
|
}
|
|
|
|
|
2013-04-22 22:14:41 +08:00
|
|
|
static void rate_fixup_ratelist(struct ieee80211_vif *vif,
|
|
|
|
struct ieee80211_supported_band *sband,
|
|
|
|
struct ieee80211_tx_info *info,
|
|
|
|
struct ieee80211_tx_rate *rates,
|
|
|
|
int max_rates)
|
|
|
|
{
|
|
|
|
struct ieee80211_rate *rate;
|
|
|
|
bool inval = false;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set up the RTS/CTS rate as the fastest basic rate
|
|
|
|
* that is not faster than the data rate unless there
|
|
|
|
* is no basic rate slower than the data rate, in which
|
|
|
|
* case we pick the slowest basic rate
|
|
|
|
*
|
|
|
|
* XXX: Should this check all retry rates?
|
|
|
|
*/
|
2014-11-22 06:29:14 +08:00
|
|
|
if (!(rates[0].flags &
|
|
|
|
(IEEE80211_TX_RC_MCS | IEEE80211_TX_RC_VHT_MCS))) {
|
2013-04-22 22:14:41 +08:00
|
|
|
u32 basic_rates = vif->bss_conf.basic_rates;
|
2014-10-13 20:34:41 +08:00
|
|
|
s8 baserate = basic_rates ? ffs(basic_rates) - 1 : 0;
|
2013-04-22 22:14:41 +08:00
|
|
|
|
|
|
|
rate = &sband->bitrates[rates[0].idx];
|
|
|
|
|
|
|
|
for (i = 0; i < sband->n_bitrates; i++) {
|
|
|
|
/* must be a basic rate */
|
|
|
|
if (!(basic_rates & BIT(i)))
|
|
|
|
continue;
|
|
|
|
/* must not be faster than the data rate */
|
|
|
|
if (sband->bitrates[i].bitrate > rate->bitrate)
|
|
|
|
continue;
|
|
|
|
/* maximum */
|
|
|
|
if (sband->bitrates[baserate].bitrate <
|
|
|
|
sband->bitrates[i].bitrate)
|
|
|
|
baserate = i;
|
|
|
|
}
|
|
|
|
|
|
|
|
info->control.rts_cts_rate_idx = baserate;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < max_rates; i++) {
|
|
|
|
/*
|
|
|
|
* make sure there's no valid rate following
|
|
|
|
* an invalid one, just in case drivers don't
|
|
|
|
* take the API seriously to stop at -1.
|
|
|
|
*/
|
|
|
|
if (inval) {
|
|
|
|
rates[i].idx = -1;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
if (rates[i].idx < 0) {
|
|
|
|
inval = true;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* For now assume MCS is already set up correctly, this
|
|
|
|
* needs to be fixed.
|
|
|
|
*/
|
|
|
|
if (rates[i].flags & IEEE80211_TX_RC_MCS) {
|
|
|
|
WARN_ON(rates[i].idx > 76);
|
|
|
|
|
|
|
|
if (!(rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) &&
|
|
|
|
info->control.use_cts_prot)
|
|
|
|
rates[i].flags |=
|
|
|
|
IEEE80211_TX_RC_USE_CTS_PROTECT;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (rates[i].flags & IEEE80211_TX_RC_VHT_MCS) {
|
|
|
|
WARN_ON(ieee80211_rate_get_vht_mcs(&rates[i]) > 9);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* set up RTS protection if desired */
|
|
|
|
if (info->control.use_rts) {
|
|
|
|
rates[i].flags |= IEEE80211_TX_RC_USE_RTS_CTS;
|
|
|
|
info->control.use_cts_prot = false;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* RC is busted */
|
|
|
|
if (WARN_ON_ONCE(rates[i].idx >= sband->n_bitrates)) {
|
|
|
|
rates[i].idx = -1;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
rate = &sband->bitrates[rates[i].idx];
|
|
|
|
|
|
|
|
/* set up short preamble */
|
|
|
|
if (info->control.short_preamble &&
|
|
|
|
rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)
|
|
|
|
rates[i].flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE;
|
|
|
|
|
|
|
|
/* set up G protection */
|
|
|
|
if (!(rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) &&
|
|
|
|
info->control.use_cts_prot &&
|
|
|
|
rate->flags & IEEE80211_RATE_ERP_G)
|
|
|
|
rates[i].flags |= IEEE80211_TX_RC_USE_CTS_PROTECT;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void rate_control_fill_sta_table(struct ieee80211_sta *sta,
|
|
|
|
struct ieee80211_tx_info *info,
|
|
|
|
struct ieee80211_tx_rate *rates,
|
|
|
|
int max_rates)
|
|
|
|
{
|
|
|
|
struct ieee80211_sta_rates *ratetbl = NULL;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (sta && !info->control.skip_table)
|
|
|
|
ratetbl = rcu_dereference(sta->rates);
|
|
|
|
|
|
|
|
/* Fill remaining rate slots with data from the sta rate table. */
|
|
|
|
max_rates = min_t(int, max_rates, IEEE80211_TX_RATE_TABLE_SIZE);
|
|
|
|
for (i = 0; i < max_rates; i++) {
|
|
|
|
if (i < ARRAY_SIZE(info->control.rates) &&
|
|
|
|
info->control.rates[i].idx >= 0 &&
|
|
|
|
info->control.rates[i].count) {
|
|
|
|
if (rates != info->control.rates)
|
|
|
|
rates[i] = info->control.rates[i];
|
|
|
|
} else if (ratetbl) {
|
|
|
|
rates[i].idx = ratetbl->rate[i].idx;
|
|
|
|
rates[i].flags = ratetbl->rate[i].flags;
|
|
|
|
if (info->control.use_rts)
|
|
|
|
rates[i].count = ratetbl->rate[i].count_rts;
|
|
|
|
else if (info->control.use_cts_prot)
|
|
|
|
rates[i].count = ratetbl->rate[i].count_cts;
|
|
|
|
else
|
|
|
|
rates[i].count = ratetbl->rate[i].count;
|
|
|
|
} else {
|
|
|
|
rates[i].idx = -1;
|
|
|
|
rates[i].count = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (rates[i].idx < 0 || !rates[i].count)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-08-07 05:47:31 +08:00
|
|
|
static bool rate_control_cap_mask(struct ieee80211_sub_if_data *sdata,
|
|
|
|
struct ieee80211_supported_band *sband,
|
|
|
|
struct ieee80211_sta *sta, u32 *mask,
|
2015-08-07 05:47:33 +08:00
|
|
|
u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN],
|
|
|
|
u16 vht_mask[NL80211_VHT_NSS_MAX])
|
2015-08-07 05:47:31 +08:00
|
|
|
{
|
|
|
|
u32 i, flags;
|
|
|
|
|
|
|
|
*mask = sdata->rc_rateidx_mask[sband->band];
|
|
|
|
flags = ieee80211_chandef_rate_flags(&sdata->vif.bss_conf.chandef);
|
|
|
|
for (i = 0; i < sband->n_bitrates; i++) {
|
|
|
|
if ((flags & sband->bitrates[i].flags) != flags)
|
|
|
|
*mask &= ~BIT(i);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (*mask == (1 << sband->n_bitrates) - 1 &&
|
2015-08-07 05:47:33 +08:00
|
|
|
!sdata->rc_has_mcs_mask[sband->band] &&
|
|
|
|
!sdata->rc_has_vht_mcs_mask[sband->band])
|
2015-08-07 05:47:31 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
if (sdata->rc_has_mcs_mask[sband->band])
|
|
|
|
memcpy(mcs_mask, sdata->rc_rateidx_mcs_mask[sband->band],
|
|
|
|
IEEE80211_HT_MCS_MASK_LEN);
|
|
|
|
else
|
|
|
|
memset(mcs_mask, 0xff, IEEE80211_HT_MCS_MASK_LEN);
|
|
|
|
|
2015-08-07 05:47:33 +08:00
|
|
|
if (sdata->rc_has_vht_mcs_mask[sband->band])
|
|
|
|
memcpy(vht_mask, sdata->rc_rateidx_vht_mcs_mask[sband->band],
|
|
|
|
sizeof(u16) * NL80211_VHT_NSS_MAX);
|
|
|
|
else
|
|
|
|
memset(vht_mask, 0xff, sizeof(u16) * NL80211_VHT_NSS_MAX);
|
|
|
|
|
2015-08-07 05:47:31 +08:00
|
|
|
if (sta) {
|
2015-08-07 05:47:33 +08:00
|
|
|
__le16 sta_vht_cap;
|
|
|
|
u16 sta_vht_mask[NL80211_VHT_NSS_MAX];
|
|
|
|
|
2015-08-07 05:47:31 +08:00
|
|
|
/* Filter out rates that the STA does not support */
|
mac80211: prepare sta handling for MLO support
Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee80211_sta
part of it.
With MLO (Multi Link Operation) support being added
in 802.11be standard, though the association is logically
with a single Multi Link capable STA, at the physical level
communication can happen via different advertised
links (uniquely identified by Channel, operating class,
BSSID) and hence the need to handle multiple link
STA parameters within a composite sta_info object
called the MLD STA. The different link STA part of
MLD STA are identified using the link address which can
be same or different as the MLD STA address and unique
link id based on the link vif.
To support extension of such a model, the sta_info
datastructure is modified to hold multiple link STA
objects with link specific params currently within
sta_info moved to this new structure. Similarly this is
done for ieee80211_sta as well which will be accessed
within mac80211 as well as by drivers, hence trivial
driver changes are expected to support this.
For current non MLO supported drivers, only one link STA
is present and link information is accessed via 'deflink'
member.
For MLO drivers, we still need to define the APIs etc. to
get the correct link ID and access the correct part of
the station info.
Currently in mac80211, all link STA info are accessed directly
via deflink. These will be updated to access via link pointers
indexed by link id with MLO support patches, with link id
being 0 for non MLO supported cases.
Except for couple of macro related changes, below spatch takes
care of updating mac80211 and driver code to access to the
link STA info via deflink.
@ieee80211_sta@
struct ieee80211_sta *s;
struct sta_info *si;
identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr};
@@
(
s->
- var
+ deflink.var
|
si->sta.
- var
+ deflink.var
)
@sta_info@
struct sta_info *si;
identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth};
@@
(
si->
- var
+ deflink.var
)
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com
[remove MLO-drivers notes from commit message, not clear yet; run spatch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-04 23:41:23 +08:00
|
|
|
*mask &= sta->deflink.supp_rates[sband->band];
|
2015-08-26 18:22:14 +08:00
|
|
|
for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
|
mac80211: prepare sta handling for MLO support
Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee80211_sta
part of it.
With MLO (Multi Link Operation) support being added
in 802.11be standard, though the association is logically
with a single Multi Link capable STA, at the physical level
communication can happen via different advertised
links (uniquely identified by Channel, operating class,
BSSID) and hence the need to handle multiple link
STA parameters within a composite sta_info object
called the MLD STA. The different link STA part of
MLD STA are identified using the link address which can
be same or different as the MLD STA address and unique
link id based on the link vif.
To support extension of such a model, the sta_info
datastructure is modified to hold multiple link STA
objects with link specific params currently within
sta_info moved to this new structure. Similarly this is
done for ieee80211_sta as well which will be accessed
within mac80211 as well as by drivers, hence trivial
driver changes are expected to support this.
For current non MLO supported drivers, only one link STA
is present and link information is accessed via 'deflink'
member.
For MLO drivers, we still need to define the APIs etc. to
get the correct link ID and access the correct part of
the station info.
Currently in mac80211, all link STA info are accessed directly
via deflink. These will be updated to access via link pointers
indexed by link id with MLO support patches, with link id
being 0 for non MLO supported cases.
Except for couple of macro related changes, below spatch takes
care of updating mac80211 and driver code to access to the
link STA info via deflink.
@ieee80211_sta@
struct ieee80211_sta *s;
struct sta_info *si;
identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr};
@@
(
s->
- var
+ deflink.var
|
si->sta.
- var
+ deflink.var
)
@sta_info@
struct sta_info *si;
identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth};
@@
(
si->
- var
+ deflink.var
)
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com
[remove MLO-drivers notes from commit message, not clear yet; run spatch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-04 23:41:23 +08:00
|
|
|
mcs_mask[i] &= sta->deflink.ht_cap.mcs.rx_mask[i];
|
2015-08-07 05:47:33 +08:00
|
|
|
|
mac80211: prepare sta handling for MLO support
Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee80211_sta
part of it.
With MLO (Multi Link Operation) support being added
in 802.11be standard, though the association is logically
with a single Multi Link capable STA, at the physical level
communication can happen via different advertised
links (uniquely identified by Channel, operating class,
BSSID) and hence the need to handle multiple link
STA parameters within a composite sta_info object
called the MLD STA. The different link STA part of
MLD STA are identified using the link address which can
be same or different as the MLD STA address and unique
link id based on the link vif.
To support extension of such a model, the sta_info
datastructure is modified to hold multiple link STA
objects with link specific params currently within
sta_info moved to this new structure. Similarly this is
done for ieee80211_sta as well which will be accessed
within mac80211 as well as by drivers, hence trivial
driver changes are expected to support this.
For current non MLO supported drivers, only one link STA
is present and link information is accessed via 'deflink'
member.
For MLO drivers, we still need to define the APIs etc. to
get the correct link ID and access the correct part of
the station info.
Currently in mac80211, all link STA info are accessed directly
via deflink. These will be updated to access via link pointers
indexed by link id with MLO support patches, with link id
being 0 for non MLO supported cases.
Except for couple of macro related changes, below spatch takes
care of updating mac80211 and driver code to access to the
link STA info via deflink.
@ieee80211_sta@
struct ieee80211_sta *s;
struct sta_info *si;
identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr};
@@
(
s->
- var
+ deflink.var
|
si->sta.
- var
+ deflink.var
)
@sta_info@
struct sta_info *si;
identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth};
@@
(
si->
- var
+ deflink.var
)
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com
[remove MLO-drivers notes from commit message, not clear yet; run spatch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-04 23:41:23 +08:00
|
|
|
sta_vht_cap = sta->deflink.vht_cap.vht_mcs.rx_mcs_map;
|
2015-08-07 05:47:33 +08:00
|
|
|
ieee80211_get_vht_mask_from_cap(sta_vht_cap, sta_vht_mask);
|
|
|
|
for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
|
|
|
|
vht_mask[i] &= sta_vht_mask[i];
|
2015-08-07 05:47:31 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2015-08-07 05:47:32 +08:00
|
|
|
static void
|
|
|
|
rate_control_apply_mask_ratetbl(struct sta_info *sta,
|
|
|
|
struct ieee80211_supported_band *sband,
|
|
|
|
struct ieee80211_sta_rates *rates)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
u32 mask;
|
|
|
|
u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN];
|
2015-08-07 05:47:33 +08:00
|
|
|
u16 vht_mask[NL80211_VHT_NSS_MAX];
|
2015-08-07 05:47:32 +08:00
|
|
|
enum nl80211_chan_width chan_width;
|
|
|
|
|
|
|
|
if (!rate_control_cap_mask(sta->sdata, sband, &sta->sta, &mask,
|
2015-08-07 05:47:33 +08:00
|
|
|
mcs_mask, vht_mask))
|
2015-08-07 05:47:32 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
chan_width = sta->sdata->vif.bss_conf.chandef.width;
|
|
|
|
for (i = 0; i < IEEE80211_TX_RATE_TABLE_SIZE; i++) {
|
|
|
|
if (rates->rate[i].idx < 0)
|
|
|
|
break;
|
|
|
|
|
|
|
|
rate_idx_match_mask(&rates->rate[i].idx, &rates->rate[i].flags,
|
2015-08-07 05:47:33 +08:00
|
|
|
sband, chan_width, mask, mcs_mask,
|
|
|
|
vht_mask);
|
2015-08-07 05:47:32 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2013-04-22 22:14:41 +08:00
|
|
|
static void rate_control_apply_mask(struct ieee80211_sub_if_data *sdata,
|
|
|
|
struct ieee80211_sta *sta,
|
|
|
|
struct ieee80211_supported_band *sband,
|
|
|
|
struct ieee80211_tx_rate *rates,
|
|
|
|
int max_rates)
|
|
|
|
{
|
|
|
|
enum nl80211_chan_width chan_width;
|
|
|
|
u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN];
|
|
|
|
u32 mask;
|
2015-08-07 05:47:33 +08:00
|
|
|
u16 rate_flags, vht_mask[NL80211_VHT_NSS_MAX];
|
2013-04-22 22:14:41 +08:00
|
|
|
int i;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to enforce the rateidx mask the user wanted. skip this if the
|
|
|
|
* default mask (allow all rates) is used to save some processing for
|
|
|
|
* the common case.
|
|
|
|
*/
|
2015-08-07 05:47:33 +08:00
|
|
|
if (!rate_control_cap_mask(sdata, sband, sta, &mask, mcs_mask,
|
|
|
|
vht_mask))
|
2013-04-22 22:14:41 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Make sure the rate index selected for each TX rate is
|
|
|
|
* included in the configured mask and change the rate indexes
|
|
|
|
* if needed.
|
|
|
|
*/
|
|
|
|
chan_width = sdata->vif.bss_conf.chandef.width;
|
|
|
|
for (i = 0; i < max_rates; i++) {
|
|
|
|
/* Skip invalid rates */
|
|
|
|
if (rates[i].idx < 0)
|
|
|
|
break;
|
|
|
|
|
2015-08-07 05:47:31 +08:00
|
|
|
rate_flags = rates[i].flags;
|
|
|
|
rate_idx_match_mask(&rates[i].idx, &rate_flags, sband,
|
2015-08-07 05:47:33 +08:00
|
|
|
chan_width, mask, mcs_mask, vht_mask);
|
2015-08-07 05:47:31 +08:00
|
|
|
rates[i].flags = rate_flags;
|
2013-04-22 22:14:41 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void ieee80211_get_tx_rates(struct ieee80211_vif *vif,
|
|
|
|
struct ieee80211_sta *sta,
|
|
|
|
struct sk_buff *skb,
|
|
|
|
struct ieee80211_tx_rate *dest,
|
|
|
|
int max_rates)
|
|
|
|
{
|
|
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
|
|
struct ieee80211_supported_band *sband;
|
|
|
|
|
|
|
|
rate_control_fill_sta_table(sta, info, dest, max_rates);
|
|
|
|
|
|
|
|
if (!vif)
|
|
|
|
return;
|
|
|
|
|
|
|
|
sdata = vif_to_sdata(vif);
|
|
|
|
sband = sdata->local->hw.wiphy->bands[info->band];
|
|
|
|
|
2021-06-18 00:31:13 +08:00
|
|
|
if (ieee80211_is_tx_data(skb))
|
2015-08-07 05:47:30 +08:00
|
|
|
rate_control_apply_mask(sdata, sta, sband, dest, max_rates);
|
2013-04-22 22:14:41 +08:00
|
|
|
|
|
|
|
if (dest[0].idx < 0)
|
2013-10-14 17:04:28 +08:00
|
|
|
__rate_control_send_low(&sdata->local->hw, sband, sta, info,
|
|
|
|
sdata->rc_rateidx_mask[info->band]);
|
2013-04-22 22:14:41 +08:00
|
|
|
|
|
|
|
if (sta)
|
|
|
|
rate_fixup_ratelist(vif, sband, info, dest, max_rates);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(ieee80211_get_tx_rates);
|
|
|
|
|
2008-09-19 00:14:18 +08:00
|
|
|
void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
|
2008-10-21 18:40:02 +08:00
|
|
|
struct sta_info *sta,
|
|
|
|
struct ieee80211_tx_rate_control *txrc)
|
2007-12-20 20:50:07 +08:00
|
|
|
{
|
2008-09-19 00:14:18 +08:00
|
|
|
struct rate_control_ref *ref = sdata->local->rate_ctrl;
|
|
|
|
void *priv_sta = NULL;
|
|
|
|
struct ieee80211_sta *ista = NULL;
|
2008-10-21 18:40:02 +08:00
|
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb);
|
2007-12-20 20:50:07 +08:00
|
|
|
int i;
|
|
|
|
|
2008-10-21 18:40:02 +08:00
|
|
|
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
|
|
|
|
info->control.rates[i].idx = -1;
|
|
|
|
info->control.rates[i].flags = 0;
|
2012-02-20 12:35:31 +08:00
|
|
|
info->control.rates[i].count = 0;
|
2008-10-21 18:40:02 +08:00
|
|
|
}
|
|
|
|
|
2019-05-29 20:25:36 +08:00
|
|
|
if (rate_control_send_low(sta ? &sta->sta : NULL, txrc))
|
2010-02-12 16:05:45 +08:00
|
|
|
return;
|
|
|
|
|
2019-05-29 20:25:36 +08:00
|
|
|
if (ieee80211_hw_check(&sdata->local->hw, HAS_RATE_CONTROL))
|
2019-05-16 17:44:52 +08:00
|
|
|
return;
|
|
|
|
|
mac80211: use STA info in rate_control_send_low()
Even if we have a station, we currently call rate_control_send_low()
with the NULL station unless further rate control (driver, minstrel)
has been initialized.
Change this so we can use more information about the station to use
a better rate. For example, when we associate with an AP, we will
now use the lowest rate it advertised as supported (that we can)
rather than the lowest mandatory rate. This aligns our behaviour
with most other 802.11 implementations.
To make this possible, we need to also ensure that we have non-zero
rates at all times, so in case we really have *nothing* pre-fill
the supp_rates bitmap with the very lowest mandatory bitmap (11b
and 11a on 2.4 and 5 GHz respectively).
Additionally, hostapd appears to be giving us an empty supported
rates bitmap (it can and should do better, since the STA must have
supported for at least the basic rates in the BSS), so ignore any
such bitmaps that would actually zero out the supp_rates, and in
that case just keep the pre-filled mandatory rates.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-05-29 20:25:35 +08:00
|
|
|
if (sta && test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) {
|
|
|
|
ista = &sta->sta;
|
|
|
|
priv_sta = sta->rate_ctrl_priv;
|
|
|
|
}
|
|
|
|
|
2015-03-05 23:10:08 +08:00
|
|
|
if (ista) {
|
|
|
|
spin_lock_bh(&sta->rate_ctrl_lock);
|
|
|
|
ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
|
|
|
|
spin_unlock_bh(&sta->rate_ctrl_lock);
|
|
|
|
} else {
|
2019-05-16 17:44:52 +08:00
|
|
|
rate_control_send_low(NULL, txrc);
|
2015-03-05 23:10:08 +08:00
|
|
|
}
|
2008-10-21 18:40:02 +08:00
|
|
|
|
2015-06-03 03:39:54 +08:00
|
|
|
if (ieee80211_hw_check(&sdata->local->hw, SUPPORTS_RC_TABLE))
|
2013-04-22 22:14:41 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
ieee80211_get_tx_rates(&sdata->vif, ista, txrc->skb,
|
|
|
|
info->control.rates,
|
|
|
|
ARRAY_SIZE(info->control.rates));
|
|
|
|
}
|
2008-10-21 18:40:02 +08:00
|
|
|
|
2013-04-22 22:14:41 +08:00
|
|
|
int rate_control_set_rates(struct ieee80211_hw *hw,
|
|
|
|
struct ieee80211_sta *pubsta,
|
|
|
|
struct ieee80211_sta_rates *rates)
|
|
|
|
{
|
2014-11-19 07:10:42 +08:00
|
|
|
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
|
2013-05-03 16:01:03 +08:00
|
|
|
struct ieee80211_sta_rates *old;
|
2015-08-07 05:47:32 +08:00
|
|
|
struct ieee80211_supported_band *sband;
|
2013-04-22 22:14:41 +08:00
|
|
|
|
2017-04-27 15:15:38 +08:00
|
|
|
sband = ieee80211_get_sband(sta->sdata);
|
|
|
|
if (!sband)
|
|
|
|
return -EINVAL;
|
2015-08-07 05:47:32 +08:00
|
|
|
rate_control_apply_mask_ratetbl(sta, sband, rates);
|
2013-05-03 16:01:03 +08:00
|
|
|
/*
|
|
|
|
* mac80211 guarantees that this function will not be called
|
|
|
|
* concurrently, so the following RCU access is safe, even without
|
|
|
|
* extra locking. This can not be checked easily, so we just set
|
|
|
|
* the condition to true.
|
|
|
|
*/
|
|
|
|
old = rcu_dereference_protected(pubsta->rates, true);
|
2013-04-22 22:14:41 +08:00
|
|
|
rcu_assign_pointer(pubsta->rates, rates);
|
|
|
|
if (old)
|
|
|
|
kfree_rcu(old, rcu_head);
|
|
|
|
|
2021-02-01 16:33:24 +08:00
|
|
|
if (sta->uploaded)
|
|
|
|
drv_sta_rate_tbl_update(hw_to_local(hw), sta->sdata, pubsta);
|
2014-11-19 07:10:42 +08:00
|
|
|
|
2017-04-06 17:38:26 +08:00
|
|
|
ieee80211_sta_set_expected_throughput(pubsta, sta_get_expected_throughput(sta));
|
|
|
|
|
2013-04-22 22:14:41 +08:00
|
|
|
return 0;
|
2007-12-20 20:50:07 +08:00
|
|
|
}
|
2013-04-22 22:14:41 +08:00
|
|
|
EXPORT_SYMBOL(rate_control_set_rates);
|
2007-12-20 20:50:07 +08:00
|
|
|
|
2007-07-27 21:43:23 +08:00
|
|
|
int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local,
|
|
|
|
const char *name)
|
|
|
|
{
|
2012-01-17 17:33:29 +08:00
|
|
|
struct rate_control_ref *ref;
|
2007-07-27 21:43:23 +08:00
|
|
|
|
|
|
|
ASSERT_RTNL();
|
2009-11-18 01:18:36 +08:00
|
|
|
|
2009-06-17 23:43:56 +08:00
|
|
|
if (local->open_count)
|
2007-07-27 21:43:23 +08:00
|
|
|
return -EBUSY;
|
|
|
|
|
2015-06-03 03:39:54 +08:00
|
|
|
if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) {
|
2009-11-18 01:18:36 +08:00
|
|
|
if (WARN_ON(!local->ops->set_rts_threshold))
|
|
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2007-07-27 21:43:23 +08:00
|
|
|
ref = rate_control_alloc(name, local);
|
|
|
|
if (!ref) {
|
2010-08-21 07:25:38 +08:00
|
|
|
wiphy_warn(local->hw.wiphy,
|
|
|
|
"Failed to select rate control algorithm\n");
|
2007-07-27 21:43:23 +08:00
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
2012-01-17 17:33:29 +08:00
|
|
|
WARN_ON(local->rate_ctrl);
|
2007-07-27 21:43:23 +08:00
|
|
|
local->rate_ctrl = ref;
|
|
|
|
|
2010-08-21 07:25:38 +08:00
|
|
|
wiphy_debug(local->hw.wiphy, "Selected rate control algorithm '%s'\n",
|
|
|
|
ref->ops->name);
|
2007-07-27 21:43:23 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void rate_control_deinitialize(struct ieee80211_local *local)
|
|
|
|
{
|
|
|
|
struct rate_control_ref *ref;
|
|
|
|
|
|
|
|
ref = local->rate_ctrl;
|
2009-11-18 01:18:36 +08:00
|
|
|
|
|
|
|
if (!ref)
|
|
|
|
return;
|
|
|
|
|
2007-07-27 21:43:23 +08:00
|
|
|
local->rate_ctrl = NULL;
|
2017-02-15 22:02:07 +08:00
|
|
|
rate_control_free(local, ref);
|
2007-07-27 21:43:23 +08:00
|
|
|
}
|