2019-05-27 14:55:06 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
2017-08-31 06:02:14 +08:00
|
|
|
/*
|
|
|
|
* Hardware monitoring driver for Texas Instruments TPS53679
|
|
|
|
*
|
|
|
|
* Copyright (c) 2017 Mellanox Technologies. All rights reserved.
|
|
|
|
* Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com>
|
|
|
|
*/
|
|
|
|
|
2020-01-21 00:11:07 +08:00
|
|
|
#include <linux/bits.h>
|
2017-08-31 06:02:14 +08:00
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
2020-01-24 23:57:02 +08:00
|
|
|
#include <linux/of_device.h>
|
2017-08-31 06:02:14 +08:00
|
|
|
#include "pmbus.h"
|
|
|
|
|
2020-01-24 23:57:02 +08:00
|
|
|
enum chips {
|
2021-03-23 03:37:34 +08:00
|
|
|
tps53647, tps53667, tps53676, tps53679, tps53681, tps53688
|
2020-01-24 23:57:02 +08:00
|
|
|
};
|
|
|
|
|
2020-01-25 00:46:28 +08:00
|
|
|
#define TPS53647_PAGE_NUM 1
|
|
|
|
|
2021-03-23 03:37:34 +08:00
|
|
|
#define TPS53676_USER_DATA_03 0xb3
|
|
|
|
#define TPS53676_MAX_PHASES 7
|
|
|
|
|
2017-08-31 06:02:14 +08:00
|
|
|
#define TPS53679_PROT_VR12_5MV 0x01 /* VR12.0 mode, 5-mV DAC */
|
|
|
|
#define TPS53679_PROT_VR12_5_10MV 0x02 /* VR12.5 mode, 10-mV DAC */
|
|
|
|
#define TPS53679_PROT_VR13_10MV 0x04 /* VR13.0 mode, 10-mV DAC */
|
|
|
|
#define TPS53679_PROT_IMVP8_5MV 0x05 /* IMVP8 mode, 5-mV DAC */
|
|
|
|
#define TPS53679_PROT_VR13_5MV 0x07 /* VR13.0 mode, 5-mV DAC */
|
|
|
|
#define TPS53679_PAGE_NUM 2
|
|
|
|
|
2020-01-21 00:11:07 +08:00
|
|
|
#define TPS53681_DEVICE_ID 0x81
|
|
|
|
|
|
|
|
#define TPS53681_PMBUS_REVISION 0x33
|
|
|
|
|
|
|
|
#define TPS53681_MFR_SPECIFIC_20 0xe4 /* Number of phases, per page */
|
|
|
|
|
2020-08-09 05:00:04 +08:00
|
|
|
static const struct i2c_device_id tps53679_id[];
|
|
|
|
|
2020-01-21 00:11:07 +08:00
|
|
|
static int tps53679_identify_mode(struct i2c_client *client,
|
|
|
|
struct pmbus_driver_info *info)
|
2017-08-31 06:02:14 +08:00
|
|
|
{
|
|
|
|
u8 vout_params;
|
2020-01-13 23:08:36 +08:00
|
|
|
int i, ret;
|
2017-08-31 06:02:14 +08:00
|
|
|
|
2020-01-25 00:46:28 +08:00
|
|
|
for (i = 0; i < info->pages; i++) {
|
2020-01-13 23:08:36 +08:00
|
|
|
/* Read the register with VOUT scaling value.*/
|
|
|
|
ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
2017-08-31 06:02:14 +08:00
|
|
|
|
2020-01-13 23:08:36 +08:00
|
|
|
vout_params = ret & GENMASK(4, 0);
|
2017-08-31 06:02:14 +08:00
|
|
|
|
2020-01-13 23:08:36 +08:00
|
|
|
switch (vout_params) {
|
|
|
|
case TPS53679_PROT_VR13_10MV:
|
|
|
|
case TPS53679_PROT_VR12_5_10MV:
|
|
|
|
info->vrm_version[i] = vr13;
|
|
|
|
break;
|
|
|
|
case TPS53679_PROT_VR13_5MV:
|
|
|
|
case TPS53679_PROT_VR12_5MV:
|
|
|
|
case TPS53679_PROT_IMVP8_5MV:
|
|
|
|
info->vrm_version[i] = vr12;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2017-08-31 06:02:14 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-01-21 00:11:07 +08:00
|
|
|
static int tps53679_identify_phases(struct i2c_client *client,
|
|
|
|
struct pmbus_driver_info *info)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* On TPS53681, only channel A provides per-phase output current */
|
|
|
|
ret = pmbus_read_byte_data(client, 0, TPS53681_MFR_SPECIFIC_20);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
info->phases[0] = (ret & 0x07) + 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps53679_identify_chip(struct i2c_client *client,
|
|
|
|
u8 revision, u16 id)
|
|
|
|
{
|
|
|
|
u8 buf[I2C_SMBUS_BLOCK_MAX];
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = pmbus_read_byte_data(client, 0, PMBUS_REVISION);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
if (ret != revision) {
|
|
|
|
dev_err(&client->dev, "Unexpected PMBus revision 0x%x\n", ret);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
if (ret != 1 || buf[0] != id) {
|
|
|
|
dev_err(&client->dev, "Unexpected device ID 0x%x\n", buf[0]);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Common identification function for chips with multi-phase support.
|
|
|
|
* Since those chips have special configuration registers, we want to have
|
|
|
|
* some level of reassurance that we are really talking with the chip
|
|
|
|
* being probed. Check PMBus revision and chip ID.
|
|
|
|
*/
|
|
|
|
static int tps53679_identify_multiphase(struct i2c_client *client,
|
|
|
|
struct pmbus_driver_info *info,
|
|
|
|
int pmbus_rev, int device_id)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = tps53679_identify_chip(client, pmbus_rev, device_id);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = tps53679_identify_mode(client, info);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return tps53679_identify_phases(client, info);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps53679_identify(struct i2c_client *client,
|
|
|
|
struct pmbus_driver_info *info)
|
|
|
|
{
|
|
|
|
return tps53679_identify_mode(client, info);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps53681_identify(struct i2c_client *client,
|
|
|
|
struct pmbus_driver_info *info)
|
|
|
|
{
|
|
|
|
return tps53679_identify_multiphase(client, info,
|
|
|
|
TPS53681_PMBUS_REVISION,
|
|
|
|
TPS53681_DEVICE_ID);
|
|
|
|
}
|
|
|
|
|
2021-03-23 03:37:34 +08:00
|
|
|
static int tps53676_identify(struct i2c_client *client,
|
|
|
|
struct pmbus_driver_info *info)
|
|
|
|
{
|
|
|
|
u8 buf[I2C_SMBUS_BLOCK_MAX];
|
|
|
|
int phases_a = 0, phases_b = 0;
|
|
|
|
int i, ret;
|
|
|
|
|
|
|
|
ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
if (strncmp("TI\x53\x67\x60", buf, 5)) {
|
|
|
|
dev_err(&client->dev, "Unexpected device ID: %s\n", buf);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = i2c_smbus_read_block_data(client, TPS53676_USER_DATA_03, buf);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
if (ret != 24)
|
|
|
|
return -EIO;
|
|
|
|
for (i = 0; i < 2 * TPS53676_MAX_PHASES; i += 2) {
|
|
|
|
if (buf[i + 1] & 0x80) {
|
|
|
|
if (buf[i] & 0x08)
|
|
|
|
phases_b++;
|
|
|
|
else
|
|
|
|
phases_a++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
info->format[PSC_VOLTAGE_OUT] = linear;
|
|
|
|
info->pages = 1;
|
|
|
|
info->phases[0] = phases_a;
|
|
|
|
if (phases_b > 0) {
|
|
|
|
info->pages = 2;
|
|
|
|
info->phases[1] = phases_b;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-01-21 00:11:07 +08:00
|
|
|
static int tps53681_read_word_data(struct i2c_client *client, int page,
|
|
|
|
int phase, int reg)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* For reading the total output current (READ_IOUT) for all phases,
|
|
|
|
* the chip datasheet is a bit vague. It says "PHASE must be set to
|
|
|
|
* FFh to access all phases simultaneously. PHASE may also be set to
|
|
|
|
* 80h readack (!) the total phase current".
|
|
|
|
* Experiments show that the command does _not_ report the total
|
|
|
|
* current for all phases if the phase is set to 0xff. Instead, it
|
|
|
|
* appears to report the current of one of the phases. Override phase
|
|
|
|
* parameter with 0x80 when reading the total output current on page 0.
|
|
|
|
*/
|
|
|
|
if (reg == PMBUS_READ_IOUT && page == 0 && phase == 0xff)
|
|
|
|
return pmbus_read_word_data(client, page, 0x80, reg);
|
|
|
|
return -ENODATA;
|
|
|
|
}
|
|
|
|
|
2017-08-31 06:02:14 +08:00
|
|
|
static struct pmbus_driver_info tps53679_info = {
|
|
|
|
.format[PSC_VOLTAGE_IN] = linear,
|
|
|
|
.format[PSC_VOLTAGE_OUT] = vid,
|
|
|
|
.format[PSC_TEMPERATURE] = linear,
|
|
|
|
.format[PSC_CURRENT_OUT] = linear,
|
|
|
|
.format[PSC_POWER] = linear,
|
2020-01-29 10:18:20 +08:00
|
|
|
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
|
|
|
|
PMBUS_HAVE_STATUS_INPUT |
|
2020-01-24 23:57:02 +08:00
|
|
|
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
|
2017-08-31 06:02:14 +08:00
|
|
|
PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
|
|
|
|
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
|
|
|
|
PMBUS_HAVE_POUT,
|
2020-01-29 10:18:20 +08:00
|
|
|
.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
|
2017-08-31 06:02:14 +08:00
|
|
|
PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
|
|
|
|
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
|
|
|
|
PMBUS_HAVE_POUT,
|
2020-01-21 00:11:07 +08:00
|
|
|
.pfunc[0] = PMBUS_HAVE_IOUT,
|
|
|
|
.pfunc[1] = PMBUS_HAVE_IOUT,
|
|
|
|
.pfunc[2] = PMBUS_HAVE_IOUT,
|
|
|
|
.pfunc[3] = PMBUS_HAVE_IOUT,
|
|
|
|
.pfunc[4] = PMBUS_HAVE_IOUT,
|
|
|
|
.pfunc[5] = PMBUS_HAVE_IOUT,
|
2021-03-23 03:37:34 +08:00
|
|
|
.pfunc[6] = PMBUS_HAVE_IOUT,
|
2017-08-31 06:02:14 +08:00
|
|
|
};
|
|
|
|
|
2020-08-09 05:00:04 +08:00
|
|
|
static int tps53679_probe(struct i2c_client *client)
|
2017-08-31 06:02:14 +08:00
|
|
|
{
|
2020-01-24 23:57:02 +08:00
|
|
|
struct device *dev = &client->dev;
|
2019-02-19 03:54:40 +08:00
|
|
|
struct pmbus_driver_info *info;
|
2020-01-24 23:57:02 +08:00
|
|
|
enum chips chip_id;
|
|
|
|
|
|
|
|
if (dev->of_node)
|
|
|
|
chip_id = (enum chips)of_device_get_match_data(dev);
|
|
|
|
else
|
2020-08-09 05:00:04 +08:00
|
|
|
chip_id = i2c_match_id(tps53679_id, client)->driver_data;
|
2019-02-19 03:54:40 +08:00
|
|
|
|
2020-01-24 23:57:02 +08:00
|
|
|
info = devm_kmemdup(dev, &tps53679_info, sizeof(*info), GFP_KERNEL);
|
2019-02-19 03:54:40 +08:00
|
|
|
if (!info)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2020-01-24 23:57:02 +08:00
|
|
|
switch (chip_id) {
|
2020-01-25 00:46:28 +08:00
|
|
|
case tps53647:
|
|
|
|
case tps53667:
|
|
|
|
info->pages = TPS53647_PAGE_NUM;
|
|
|
|
info->identify = tps53679_identify;
|
|
|
|
break;
|
2021-03-23 03:37:34 +08:00
|
|
|
case tps53676:
|
|
|
|
info->identify = tps53676_identify;
|
|
|
|
break;
|
2020-01-24 23:57:02 +08:00
|
|
|
case tps53679:
|
|
|
|
case tps53688:
|
|
|
|
info->pages = TPS53679_PAGE_NUM;
|
|
|
|
info->identify = tps53679_identify;
|
|
|
|
break;
|
2020-01-21 00:11:07 +08:00
|
|
|
case tps53681:
|
|
|
|
info->pages = TPS53679_PAGE_NUM;
|
|
|
|
info->phases[0] = 6;
|
|
|
|
info->identify = tps53681_identify;
|
|
|
|
info->read_word_data = tps53681_read_word_data;
|
|
|
|
break;
|
2020-01-24 23:57:02 +08:00
|
|
|
default:
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
2020-08-09 05:00:04 +08:00
|
|
|
return pmbus_do_probe(client, info);
|
2017-08-31 06:02:14 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct i2c_device_id tps53679_id[] = {
|
2021-03-23 03:37:34 +08:00
|
|
|
{"bmr474", tps53676},
|
2020-01-25 00:46:28 +08:00
|
|
|
{"tps53647", tps53647},
|
|
|
|
{"tps53667", tps53667},
|
2021-03-23 03:37:34 +08:00
|
|
|
{"tps53676", tps53676},
|
2020-01-24 23:57:02 +08:00
|
|
|
{"tps53679", tps53679},
|
2020-01-21 00:11:07 +08:00
|
|
|
{"tps53681", tps53681},
|
2020-01-24 23:57:02 +08:00
|
|
|
{"tps53688", tps53688},
|
2017-08-31 06:02:14 +08:00
|
|
|
{}
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(i2c, tps53679_id);
|
|
|
|
|
2019-04-04 21:16:46 +08:00
|
|
|
static const struct of_device_id __maybe_unused tps53679_of_match[] = {
|
2020-01-25 00:46:28 +08:00
|
|
|
{.compatible = "ti,tps53647", .data = (void *)tps53647},
|
|
|
|
{.compatible = "ti,tps53667", .data = (void *)tps53667},
|
2021-03-23 03:37:34 +08:00
|
|
|
{.compatible = "ti,tps53676", .data = (void *)tps53676},
|
2020-01-24 23:57:02 +08:00
|
|
|
{.compatible = "ti,tps53679", .data = (void *)tps53679},
|
2020-01-21 00:11:07 +08:00
|
|
|
{.compatible = "ti,tps53681", .data = (void *)tps53681},
|
2020-01-24 23:57:02 +08:00
|
|
|
{.compatible = "ti,tps53688", .data = (void *)tps53688},
|
2017-08-31 06:02:14 +08:00
|
|
|
{}
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, tps53679_of_match);
|
|
|
|
|
|
|
|
static struct i2c_driver tps53679_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "tps53679",
|
|
|
|
.of_match_table = of_match_ptr(tps53679_of_match),
|
|
|
|
},
|
2020-08-09 05:00:04 +08:00
|
|
|
.probe_new = tps53679_probe,
|
2017-08-31 06:02:14 +08:00
|
|
|
.id_table = tps53679_id,
|
|
|
|
};
|
|
|
|
|
|
|
|
module_i2c_driver(tps53679_driver);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
|
|
|
|
MODULE_DESCRIPTION("PMBus driver for Texas Instruments TPS53679");
|
|
|
|
MODULE_LICENSE("GPL");
|
2021-04-20 14:07:07 +08:00
|
|
|
MODULE_IMPORT_NS(PMBUS);
|