UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/net/wireless/ath/ath5k/rfbuffer.h

1182 lines
44 KiB
C
Raw Normal View History

ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
/*
* RF Buffer handling functions
*
* Copyright (c) 2009 Nick Kossifidis <mickflemm@gmail.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
/*
* There are some special registers on the RF chip
* that control various operation settings related mostly to
* the analog parts (channel, gain adjustment etc).
*
* We don't write on those registers directly but
* we send a data packet on the chip, using a special register,
* that holds all the settings we need. After we 've sent the
* data packet, we write on another special register to notify hw
* to apply the settings. This is done so that control registers
* can be dynamicaly programmed during operation and the settings
* are applied faster on the hw.
*
* We call each data packet an "RF Bank" and all the data we write
* (all RF Banks) "RF Buffer". This file holds initial RF Buffer
* data for the different RF chips, and various info to match RF
* Buffer offsets with specific RF registers so that we can access
* them. We tweak these settings on rfregs_init function.
*
* Also check out reg.h and U.S. Patent 6677779 B1 (about buffer
* registers and control registers):
*
* http://www.google.com/patents?id=qNURAAAAEBAJ
*/
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
/*
* Struct to hold default mode specific RF
* register values (RF Banks)
*/
struct ath5k_ini_rfbuffer {
u8 rfb_bank; /* RF Bank number */
u16 rfb_ctrl_register; /* RF Buffer control register */
u32 rfb_mode_data[5]; /* RF Buffer data for each mode */
};
/*
* Struct to hold RF Buffer field
* infos used to access certain RF
* analog registers
*/
struct ath5k_rfb_field {
u8 len; /* Field length */
u16 pos; /* Offset on the raw packet */
u8 col; /* Column -used for shifting */
};
/*
* RF analog register definition
*/
struct ath5k_rf_reg {
u8 bank; /* RF Buffer Bank number */
u8 index; /* Register's index on rf_regs_idx */
struct ath5k_rfb_field field; /* RF Buffer field for this register */
};
/* Map RF registers to indexes
* We do this to handle common bits and make our
* life easier by using an index for each register
* instead of a full rfb_field */
enum ath5k_rf_regs_idx {
/* BANK 6 */
AR5K_RF_OB_2GHZ = 0,
AR5K_RF_OB_5GHZ,
AR5K_RF_DB_2GHZ,
AR5K_RF_DB_5GHZ,
AR5K_RF_FIXED_BIAS_A,
AR5K_RF_FIXED_BIAS_B,
AR5K_RF_PWD_XPD,
AR5K_RF_XPD_SEL,
AR5K_RF_XPD_GAIN,
AR5K_RF_PD_GAIN_LO,
AR5K_RF_PD_GAIN_HI,
AR5K_RF_HIGH_VC_CP,
AR5K_RF_MID_VC_CP,
AR5K_RF_LOW_VC_CP,
AR5K_RF_PUSH_UP,
AR5K_RF_PAD2GND,
AR5K_RF_XB2_LVL,
AR5K_RF_XB5_LVL,
AR5K_RF_PWD_ICLOBUF_2G,
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
AR5K_RF_PWD_84,
AR5K_RF_PWD_90,
AR5K_RF_PWD_130,
AR5K_RF_PWD_131,
AR5K_RF_PWD_132,
AR5K_RF_PWD_136,
AR5K_RF_PWD_137,
AR5K_RF_PWD_138,
AR5K_RF_PWD_166,
AR5K_RF_PWD_167,
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
AR5K_RF_DERBY_CHAN_SEL_MODE,
/* BANK 7 */
AR5K_RF_GAIN_I,
AR5K_RF_PLO_SEL,
AR5K_RF_RFGAIN_SEL,
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
AR5K_RF_RFGAIN_STEP,
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
AR5K_RF_WAIT_S,
AR5K_RF_WAIT_I,
AR5K_RF_MAX_TIME,
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
AR5K_RF_MIXVGA_OVR,
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
AR5K_RF_MIXGAIN_OVR,
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
AR5K_RF_MIXGAIN_STEP,
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
AR5K_RF_PD_DELAY_A,
AR5K_RF_PD_DELAY_B,
AR5K_RF_PD_DELAY_XR,
AR5K_RF_PD_PERIOD_A,
AR5K_RF_PD_PERIOD_B,
AR5K_RF_PD_PERIOD_XR,
};
/*******************\
* RF5111 (Sombrero) *
\*******************/
/* BANK 6 len pos col */
#define AR5K_RF5111_OB_2GHZ { 3, 119, 0 }
#define AR5K_RF5111_DB_2GHZ { 3, 122, 0 }
#define AR5K_RF5111_OB_5GHZ { 3, 104, 0 }
#define AR5K_RF5111_DB_5GHZ { 3, 107, 0 }
#define AR5K_RF5111_PWD_XPD { 1, 95, 0 }
#define AR5K_RF5111_XPD_GAIN { 4, 96, 0 }
/* Access to PWD registers */
#define AR5K_RF5111_PWD(_n) { 1, (135 - _n), 3 }
/* BANK 7 len pos col */
#define AR5K_RF5111_GAIN_I { 6, 29, 0 }
#define AR5K_RF5111_PLO_SEL { 1, 4, 0 }
#define AR5K_RF5111_RFGAIN_SEL { 1, 36, 0 }
ath5k: Update gain_F calibration code and add documentation * Update and cleanup rf gain optimization code * Add comments and refferences to docs and use sane function names * Use only step index on ath5k_gain, no need to have a pointer to the current step since we can determine te step from it's index, this also allows us to put all other structs on rfgain.h and cleanup ath5k.h a little * No need for ah_rfgain variable, we use ah_gain.g_state for everything * Tested on RF2112B chip but gain_F calibration is not yet done (we will finish this on the next patch where we'll rewrite rf-buffer handling) * Use initial rf gain settings for 2316 and 2317 SoCs introduced on a previous patch It seems big but it's mostly cleanup, very few functional changes have been made on phy.c Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:03:41 +08:00
#define AR5K_RF5111_RFGAIN_STEP { 6, 37, 0 }
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
/* Only on AR5212 BaseBand and up */
#define AR5K_RF5111_WAIT_S { 5, 19, 0 }
#define AR5K_RF5111_WAIT_I { 5, 24, 0 }
#define AR5K_RF5111_MAX_TIME { 2, 49, 0 }
static const struct ath5k_rf_reg rf_regs_5111[] = {
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
{6, AR5K_RF_OB_2GHZ, AR5K_RF5111_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF5111_DB_2GHZ},
{6, AR5K_RF_OB_5GHZ, AR5K_RF5111_OB_5GHZ},
{6, AR5K_RF_DB_5GHZ, AR5K_RF5111_DB_5GHZ},
{6, AR5K_RF_PWD_XPD, AR5K_RF5111_PWD_XPD},
{6, AR5K_RF_XPD_GAIN, AR5K_RF5111_XPD_GAIN},
{6, AR5K_RF_PWD_84, AR5K_RF5111_PWD(84)},
{6, AR5K_RF_PWD_90, AR5K_RF5111_PWD(90)},
{7, AR5K_RF_GAIN_I, AR5K_RF5111_GAIN_I},
{7, AR5K_RF_PLO_SEL, AR5K_RF5111_PLO_SEL},
{7, AR5K_RF_RFGAIN_SEL, AR5K_RF5111_RFGAIN_SEL},
{7, AR5K_RF_RFGAIN_STEP, AR5K_RF5111_RFGAIN_STEP},
{7, AR5K_RF_WAIT_S, AR5K_RF5111_WAIT_S},
{7, AR5K_RF_WAIT_I, AR5K_RF5111_WAIT_I},
{7, AR5K_RF_MAX_TIME, AR5K_RF5111_MAX_TIME}
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
};
/* Default mode specific settings */
static const struct ath5k_ini_rfbuffer rfb_5111[] = {
{ 0, 0x989c,
/* mode a/XR mode aTurbo mode b mode g mode gTurbo */
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00380000, 0x00380000, 0x00380000, 0x00380000, 0x00380000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 0, 0x989c,
{ 0x00000000, 0x00000000, 0x000000c0, 0x00000080, 0x00000080 } },
{ 0, 0x989c,
{ 0x000400f9, 0x000400f9, 0x000400ff, 0x000400fd, 0x000400fd } },
{ 0, 0x98d4,
{ 0x00000000, 0x00000000, 0x00000004, 0x00000004, 0x00000004 } },
{ 1, 0x98d4,
{ 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
{ 2, 0x98d4,
{ 0x00000010, 0x00000014, 0x00000010, 0x00000010, 0x00000014 } },
{ 3, 0x98d8,
{ 0x00601068, 0x00601068, 0x00601068, 0x00601068, 0x00601068 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
{ 6, 0x989c,
{ 0x04000000, 0x04000000, 0x04000000, 0x04000000, 0x04000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x0a000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x003800c0, 0x00380080, 0x023800c0, 0x003800c0, 0x003800c0 } },
{ 6, 0x989c,
{ 0x00020006, 0x00020006, 0x00000006, 0x00020006, 0x00020006 } },
{ 6, 0x989c,
{ 0x00000089, 0x00000089, 0x00000089, 0x00000089, 0x00000089 } },
{ 6, 0x989c,
{ 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0 } },
{ 6, 0x989c,
{ 0x00040007, 0x00040007, 0x00040007, 0x00040007, 0x00040007 } },
{ 6, 0x98d4,
{ 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a } },
{ 7, 0x989c,
{ 0x00000040, 0x00000048, 0x00000040, 0x00000040, 0x00000040 } },
{ 7, 0x989c,
{ 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } },
{ 7, 0x989c,
{ 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } },
{ 7, 0x989c,
{ 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f } },
{ 7, 0x989c,
{ 0x000000f1, 0x000000f1, 0x00000061, 0x000000f1, 0x000000f1 } },
{ 7, 0x989c,
{ 0x0000904f, 0x0000904f, 0x0000904c, 0x0000904f, 0x0000904f } },
{ 7, 0x989c,
{ 0x0000125a, 0x0000125a, 0x0000129a, 0x0000125a, 0x0000125a } },
{ 7, 0x98cc,
{ 0x0000000e, 0x0000000e, 0x0000000f, 0x0000000e, 0x0000000e } },
};
/***********************\
* RF5112/RF2112 (Derby) *
\***********************/
/* BANK 7 (Common) len pos col */
#define AR5K_RF5112X_GAIN_I { 6, 14, 0 }
ath5k: Update gain_F calibration code and add documentation * Update and cleanup rf gain optimization code * Add comments and refferences to docs and use sane function names * Use only step index on ath5k_gain, no need to have a pointer to the current step since we can determine te step from it's index, this also allows us to put all other structs on rfgain.h and cleanup ath5k.h a little * No need for ah_rfgain variable, we use ah_gain.g_state for everything * Tested on RF2112B chip but gain_F calibration is not yet done (we will finish this on the next patch where we'll rewrite rf-buffer handling) * Use initial rf gain settings for 2316 and 2317 SoCs introduced on a previous patch It seems big but it's mostly cleanup, very few functional changes have been made on phy.c Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:03:41 +08:00
#define AR5K_RF5112X_MIXVGA_OVR { 1, 36, 0 }
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
#define AR5K_RF5112X_MIXGAIN_OVR { 2, 37, 0 }
ath5k: Update gain_F calibration code and add documentation * Update and cleanup rf gain optimization code * Add comments and refferences to docs and use sane function names * Use only step index on ath5k_gain, no need to have a pointer to the current step since we can determine te step from it's index, this also allows us to put all other structs on rfgain.h and cleanup ath5k.h a little * No need for ah_rfgain variable, we use ah_gain.g_state for everything * Tested on RF2112B chip but gain_F calibration is not yet done (we will finish this on the next patch where we'll rewrite rf-buffer handling) * Use initial rf gain settings for 2316 and 2317 SoCs introduced on a previous patch It seems big but it's mostly cleanup, very few functional changes have been made on phy.c Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:03:41 +08:00
#define AR5K_RF5112X_MIXGAIN_STEP { 4, 32, 0 }
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
#define AR5K_RF5112X_PD_DELAY_A { 4, 58, 0 }
#define AR5K_RF5112X_PD_DELAY_B { 4, 62, 0 }
#define AR5K_RF5112X_PD_DELAY_XR { 4, 66, 0 }
#define AR5K_RF5112X_PD_PERIOD_A { 4, 70, 0 }
#define AR5K_RF5112X_PD_PERIOD_B { 4, 74, 0 }
#define AR5K_RF5112X_PD_PERIOD_XR { 4, 78, 0 }
/* RFX112 (Derby 1) */
/* BANK 6 len pos col */
#define AR5K_RF5112_OB_2GHZ { 3, 269, 0 }
#define AR5K_RF5112_DB_2GHZ { 3, 272, 0 }
#define AR5K_RF5112_OB_5GHZ { 3, 261, 0 }
#define AR5K_RF5112_DB_5GHZ { 3, 264, 0 }
#define AR5K_RF5112_FIXED_BIAS_A { 1, 260, 0 }
#define AR5K_RF5112_FIXED_BIAS_B { 1, 259, 0 }
#define AR5K_RF5112_XPD_SEL { 1, 284, 0 }
#define AR5K_RF5112_XPD_GAIN { 2, 252, 0 }
/* Access to PWD registers */
#define AR5K_RF5112_PWD(_n) { 1, (302 - _n), 3 }
static const struct ath5k_rf_reg rf_regs_5112[] = {
{6, AR5K_RF_OB_2GHZ, AR5K_RF5112_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF5112_DB_2GHZ},
{6, AR5K_RF_OB_5GHZ, AR5K_RF5112_OB_5GHZ},
{6, AR5K_RF_DB_5GHZ, AR5K_RF5112_DB_5GHZ},
{6, AR5K_RF_FIXED_BIAS_A, AR5K_RF5112_FIXED_BIAS_A},
{6, AR5K_RF_FIXED_BIAS_B, AR5K_RF5112_FIXED_BIAS_B},
{6, AR5K_RF_XPD_SEL, AR5K_RF5112_XPD_SEL},
{6, AR5K_RF_XPD_GAIN, AR5K_RF5112_XPD_GAIN},
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
{6, AR5K_RF_PWD_130, AR5K_RF5112_PWD(130)},
{6, AR5K_RF_PWD_131, AR5K_RF5112_PWD(131)},
{6, AR5K_RF_PWD_132, AR5K_RF5112_PWD(132)},
{6, AR5K_RF_PWD_136, AR5K_RF5112_PWD(136)},
{6, AR5K_RF_PWD_137, AR5K_RF5112_PWD(137)},
{6, AR5K_RF_PWD_138, AR5K_RF5112_PWD(138)},
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
{7, AR5K_RF_GAIN_I, AR5K_RF5112X_GAIN_I},
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
{7, AR5K_RF_MIXVGA_OVR, AR5K_RF5112X_MIXVGA_OVR},
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
{7, AR5K_RF_MIXGAIN_OVR, AR5K_RF5112X_MIXGAIN_OVR},
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
{7, AR5K_RF_MIXGAIN_STEP, AR5K_RF5112X_MIXGAIN_STEP},
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
{7, AR5K_RF_PD_DELAY_A, AR5K_RF5112X_PD_DELAY_A},
{7, AR5K_RF_PD_DELAY_B, AR5K_RF5112X_PD_DELAY_B},
{7, AR5K_RF_PD_DELAY_XR, AR5K_RF5112X_PD_DELAY_XR},
{7, AR5K_RF_PD_PERIOD_A, AR5K_RF5112X_PD_PERIOD_A},
{7, AR5K_RF_PD_PERIOD_B, AR5K_RF5112X_PD_PERIOD_B},
{7, AR5K_RF_PD_PERIOD_XR, AR5K_RF5112X_PD_PERIOD_XR},
};
/* Default mode specific settings */
static const struct ath5k_ini_rfbuffer rfb_5112[] = {
{ 1, 0x98d4,
/* mode a/XR mode aTurbo mode b mode g mode gTurbo */
{ 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
{ 2, 0x98d0,
{ 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } },
{ 3, 0x98dc,
{ 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } },
{ 6, 0x989c,
{ 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000 } },
{ 6, 0x989c,
{ 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00660000, 0x00660000, 0x00660000, 0x00660000, 0x00660000 } },
{ 6, 0x989c,
{ 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000 } },
{ 6, 0x989c,
{ 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000 } },
{ 6, 0x989c,
{ 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
{ 6, 0x989c,
{ 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
{ 6, 0x989c,
{ 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
{ 6, 0x989c,
{ 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
{ 6, 0x989c,
{ 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
{ 6, 0x989c,
{ 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000 } },
{ 6, 0x989c,
{ 0x00600000, 0x00600000, 0x00600000, 0x00600000, 0x00600000 } },
{ 6, 0x989c,
{ 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
{ 6, 0x989c,
{ 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } },
{ 6, 0x989c,
{ 0x00640000, 0x00640000, 0x00640000, 0x00640000, 0x00640000 } },
{ 6, 0x989c,
{ 0x00200000, 0x00200000, 0x00200000, 0x00200000, 0x00200000 } },
{ 6, 0x989c,
{ 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } },
{ 6, 0x989c,
{ 0x00250000, 0x00250000, 0x00250000, 0x00250000, 0x00250000 } },
{ 6, 0x989c,
{ 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
{ 6, 0x989c,
{ 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
{ 6, 0x989c,
{ 0x00510000, 0x00510000, 0x00510000, 0x00510000, 0x00510000 } },
{ 6, 0x989c,
{ 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000 } },
{ 6, 0x989c,
{ 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } },
{ 6, 0x989c,
{ 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000 } },
{ 6, 0x989c,
{ 0x00400000, 0x00400000, 0x00400000, 0x00400000, 0x00400000 } },
{ 6, 0x989c,
{ 0x03090000, 0x03090000, 0x03090000, 0x03090000, 0x03090000 } },
{ 6, 0x989c,
{ 0x06000000, 0x06000000, 0x06000000, 0x06000000, 0x06000000 } },
{ 6, 0x989c,
{ 0x000000b0, 0x000000b0, 0x000000a8, 0x000000a8, 0x000000a8 } },
{ 6, 0x989c,
{ 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e } },
{ 6, 0x989c,
{ 0x006c4a41, 0x006c4a41, 0x006c4af1, 0x006c4a61, 0x006c4a61 } },
{ 6, 0x989c,
{ 0x0050892a, 0x0050892a, 0x0050892b, 0x0050892b, 0x0050892b } },
{ 6, 0x989c,
{ 0x00842400, 0x00842400, 0x00842400, 0x00842400, 0x00842400 } },
{ 6, 0x989c,
{ 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200 } },
{ 6, 0x98d0,
{ 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c } },
{ 7, 0x989c,
{ 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } },
{ 7, 0x989c,
{ 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } },
{ 7, 0x989c,
{ 0x0000000a, 0x0000000a, 0x00000012, 0x00000012, 0x00000012 } },
{ 7, 0x989c,
{ 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } },
{ 7, 0x989c,
{ 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1 } },
{ 7, 0x989c,
{ 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
{ 7, 0x989c,
{ 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } },
{ 7, 0x989c,
{ 0x00000022, 0x00000022, 0x00000022, 0x00000022, 0x00000022 } },
{ 7, 0x989c,
{ 0x00000092, 0x00000092, 0x00000092, 0x00000092, 0x00000092 } },
{ 7, 0x989c,
{ 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } },
{ 7, 0x989c,
{ 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } },
{ 7, 0x989c,
{ 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } },
{ 7, 0x98c4,
{ 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
};
/* RFX112A (Derby 2) */
/* BANK 6 len pos col */
#define AR5K_RF5112A_OB_2GHZ { 3, 287, 0 }
#define AR5K_RF5112A_DB_2GHZ { 3, 290, 0 }
#define AR5K_RF5112A_OB_5GHZ { 3, 279, 0 }
#define AR5K_RF5112A_DB_5GHZ { 3, 282, 0 }
#define AR5K_RF5112A_FIXED_BIAS_A { 1, 278, 0 }
#define AR5K_RF5112A_FIXED_BIAS_B { 1, 277, 0 }
#define AR5K_RF5112A_XPD_SEL { 1, 302, 0 }
#define AR5K_RF5112A_PDGAINLO { 2, 270, 0 }
#define AR5K_RF5112A_PDGAINHI { 2, 257, 0 }
/* Access to PWD registers */
#define AR5K_RF5112A_PWD(_n) { 1, (306 - _n), 3 }
/* Voltage regulators */
#define AR5K_RF5112A_HIGH_VC_CP { 2, 90, 2 }
#define AR5K_RF5112A_MID_VC_CP { 2, 92, 2 }
#define AR5K_RF5112A_LOW_VC_CP { 2, 94, 2 }
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
#define AR5K_RF5112A_PUSH_UP { 1, 254, 2 }
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
/* Power consumption */
#define AR5K_RF5112A_PAD2GND { 1, 281, 1 }
#define AR5K_RF5112A_XB2_LVL { 2, 1, 3 }
#define AR5K_RF5112A_XB5_LVL { 2, 3, 3 }
static const struct ath5k_rf_reg rf_regs_5112a[] = {
{6, AR5K_RF_OB_2GHZ, AR5K_RF5112A_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF5112A_DB_2GHZ},
{6, AR5K_RF_OB_5GHZ, AR5K_RF5112A_OB_5GHZ},
{6, AR5K_RF_DB_5GHZ, AR5K_RF5112A_DB_5GHZ},
{6, AR5K_RF_FIXED_BIAS_A, AR5K_RF5112A_FIXED_BIAS_A},
{6, AR5K_RF_FIXED_BIAS_B, AR5K_RF5112A_FIXED_BIAS_B},
{6, AR5K_RF_XPD_SEL, AR5K_RF5112A_XPD_SEL},
{6, AR5K_RF_PD_GAIN_LO, AR5K_RF5112A_PDGAINLO},
{6, AR5K_RF_PD_GAIN_HI, AR5K_RF5112A_PDGAINHI},
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
{6, AR5K_RF_PWD_130, AR5K_RF5112A_PWD(130)},
{6, AR5K_RF_PWD_131, AR5K_RF5112A_PWD(131)},
{6, AR5K_RF_PWD_132, AR5K_RF5112A_PWD(132)},
{6, AR5K_RF_PWD_136, AR5K_RF5112A_PWD(136)},
{6, AR5K_RF_PWD_137, AR5K_RF5112A_PWD(137)},
{6, AR5K_RF_PWD_138, AR5K_RF5112A_PWD(138)},
{6, AR5K_RF_PWD_166, AR5K_RF5112A_PWD(166)},
{6, AR5K_RF_PWD_167, AR5K_RF5112A_PWD(167)},
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
{6, AR5K_RF_HIGH_VC_CP, AR5K_RF5112A_HIGH_VC_CP},
{6, AR5K_RF_MID_VC_CP, AR5K_RF5112A_MID_VC_CP},
{6, AR5K_RF_LOW_VC_CP, AR5K_RF5112A_LOW_VC_CP},
{6, AR5K_RF_PUSH_UP, AR5K_RF5112A_PUSH_UP},
{6, AR5K_RF_PAD2GND, AR5K_RF5112A_PAD2GND},
{6, AR5K_RF_XB2_LVL, AR5K_RF5112A_XB2_LVL},
{6, AR5K_RF_XB5_LVL, AR5K_RF5112A_XB5_LVL},
{7, AR5K_RF_GAIN_I, AR5K_RF5112X_GAIN_I},
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
{7, AR5K_RF_MIXVGA_OVR, AR5K_RF5112X_MIXVGA_OVR},
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
{7, AR5K_RF_MIXGAIN_OVR, AR5K_RF5112X_MIXGAIN_OVR},
ath5k: Update RF Buffer handling * Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:06:34 +08:00
{7, AR5K_RF_MIXGAIN_STEP, AR5K_RF5112X_MIXGAIN_STEP},
ath5k: PHY code cleanup * Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09 12:00:34 +08:00
{7, AR5K_RF_PD_DELAY_A, AR5K_RF5112X_PD_DELAY_A},
{7, AR5K_RF_PD_DELAY_B, AR5K_RF5112X_PD_DELAY_B},
{7, AR5K_RF_PD_DELAY_XR, AR5K_RF5112X_PD_DELAY_XR},
{7, AR5K_RF_PD_PERIOD_A, AR5K_RF5112X_PD_PERIOD_A},
{7, AR5K_RF_PD_PERIOD_B, AR5K_RF5112X_PD_PERIOD_B},
{7, AR5K_RF_PD_PERIOD_XR, AR5K_RF5112X_PD_PERIOD_XR},
};
/* Default mode specific settings */
static const struct ath5k_ini_rfbuffer rfb_5112a[] = {
{ 1, 0x98d4,
/* mode a/XR mode aTurbo mode b mode g mode gTurbo */
{ 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
{ 2, 0x98d0,
{ 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } },
{ 3, 0x98dc,
{ 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
{ 6, 0x989c,
{ 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00800000, 0x00800000, 0x00800000, 0x00800000, 0x00800000 } },
{ 6, 0x989c,
{ 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
{ 6, 0x989c,
{ 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00180000, 0x00180000, 0x00180000, 0x00180000, 0x00180000 } },
{ 6, 0x989c,
{ 0x00600000, 0x00600000, 0x006e0000, 0x006e0000, 0x006e0000 } },
{ 6, 0x989c,
{ 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000 } },
{ 6, 0x989c,
{ 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000 } },
{ 6, 0x989c,
{ 0x04480000, 0x04480000, 0x04480000, 0x04480000, 0x04480000 } },
{ 6, 0x989c,
{ 0x004c0000, 0x004c0000, 0x004c0000, 0x004c0000, 0x004c0000 } },
{ 6, 0x989c,
{ 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000 } },
{ 6, 0x989c,
{ 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
{ 6, 0x989c,
{ 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000 } },
{ 6, 0x989c,
{ 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
{ 6, 0x989c,
{ 0x02190000, 0x02190000, 0x02190000, 0x02190000, 0x02190000 } },
{ 6, 0x989c,
{ 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } },
{ 6, 0x989c,
{ 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000 } },
{ 6, 0x989c,
{ 0x00990000, 0x00990000, 0x00990000, 0x00990000, 0x00990000 } },
{ 6, 0x989c,
{ 0x00500000, 0x00500000, 0x00500000, 0x00500000, 0x00500000 } },
{ 6, 0x989c,
{ 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
{ 6, 0x989c,
{ 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
{ 6, 0x989c,
{ 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000 } },
{ 6, 0x989c,
{ 0x01740000, 0x01740000, 0x01740000, 0x01740000, 0x01740000 } },
{ 6, 0x989c,
{ 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
{ 6, 0x989c,
{ 0x86280000, 0x86280000, 0x86280000, 0x86280000, 0x86280000 } },
{ 6, 0x989c,
{ 0x31840000, 0x31840000, 0x31840000, 0x31840000, 0x31840000 } },
{ 6, 0x989c,
{ 0x00f20080, 0x00f20080, 0x00f20080, 0x00f20080, 0x00f20080 } },
{ 6, 0x989c,
{ 0x00270019, 0x00270019, 0x00270019, 0x00270019, 0x00270019 } },
{ 6, 0x989c,
{ 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2 } },
{ 6, 0x989c,
{ 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084 } },
{ 6, 0x989c,
{ 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4 } },
{ 6, 0x989c,
{ 0x00119220, 0x00119220, 0x00119220, 0x00119220, 0x00119220 } },
{ 6, 0x989c,
{ 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800 } },
{ 6, 0x98d8,
{ 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230 } },
{ 7, 0x989c,
{ 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } },
{ 7, 0x989c,
{ 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } },
{ 7, 0x989c,
{ 0x00000012, 0x00000012, 0x00000012, 0x00000012, 0x00000012 } },
{ 7, 0x989c,
{ 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } },
{ 7, 0x989c,
{ 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9 } },
{ 7, 0x989c,
{ 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
{ 7, 0x989c,
{ 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } },
{ 7, 0x989c,
{ 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2 } },
{ 7, 0x989c,
{ 0x00000052, 0x00000052, 0x00000052, 0x00000052, 0x00000052 } },
{ 7, 0x989c,
{ 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } },
{ 7, 0x989c,
{ 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } },
{ 7, 0x989c,
{ 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } },
{ 7, 0x98c4,
{ 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
};
/******************\
* RF2413 (Griffin) *
\******************/
/* BANK 6 len pos col */
#define AR5K_RF2413_OB_2GHZ { 3, 168, 0 }
#define AR5K_RF2413_DB_2GHZ { 3, 165, 0 }
static const struct ath5k_rf_reg rf_regs_2413[] = {
{6, AR5K_RF_OB_2GHZ, AR5K_RF2413_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF2413_DB_2GHZ},
};
/* Default mode specific settings
* XXX: a/aTurbo ???
*/
static const struct ath5k_ini_rfbuffer rfb_2413[] = {
{ 1, 0x98d4,
/* mode a/XR mode aTurbo mode b mode g mode gTurbo */
{ 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
{ 2, 0x98d0,
{ 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } },
{ 3, 0x98dc,
{ 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
{ 6, 0x989c,
{ 0xf0000000, 0xf0000000, 0xf0000000, 0xf0000000, 0xf0000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x03000000, 0x03000000, 0x03000000, 0x03000000, 0x03000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x40400000, 0x40400000, 0x40400000, 0x40400000, 0x40400000 } },
{ 6, 0x989c,
{ 0x65050000, 0x65050000, 0x65050000, 0x65050000, 0x65050000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00420000, 0x00420000, 0x00420000, 0x00420000, 0x00420000 } },
{ 6, 0x989c,
{ 0x00b50000, 0x00b50000, 0x00b50000, 0x00b50000, 0x00b50000 } },
{ 6, 0x989c,
{ 0x00030000, 0x00030000, 0x00030000, 0x00030000, 0x00030000 } },
{ 6, 0x989c,
{ 0x00f70000, 0x00f70000, 0x00f70000, 0x00f70000, 0x00f70000 } },
{ 6, 0x989c,
{ 0x009d0000, 0x009d0000, 0x009d0000, 0x009d0000, 0x009d0000 } },
{ 6, 0x989c,
{ 0x00220000, 0x00220000, 0x00220000, 0x00220000, 0x00220000 } },
{ 6, 0x989c,
{ 0x04220000, 0x04220000, 0x04220000, 0x04220000, 0x04220000 } },
{ 6, 0x989c,
{ 0x00230018, 0x00230018, 0x00230018, 0x00230018, 0x00230018 } },
{ 6, 0x989c,
{ 0x00280000, 0x00280000, 0x00280060, 0x00280060, 0x00280060 } },
{ 6, 0x989c,
{ 0x005000c0, 0x005000c0, 0x005000c3, 0x005000c3, 0x005000c3 } },
{ 6, 0x989c,
{ 0x0004007f, 0x0004007f, 0x0004007f, 0x0004007f, 0x0004007f } },
{ 6, 0x989c,
{ 0x00000458, 0x00000458, 0x00000458, 0x00000458, 0x00000458 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x0000c000, 0x0000c000, 0x0000c000, 0x0000c000, 0x0000c000 } },
{ 6, 0x98d8,
{ 0x00400230, 0x00400230, 0x00400230, 0x00400230, 0x00400230 } },
{ 7, 0x989c,
{ 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
{ 7, 0x989c,
{ 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
{ 7, 0x98cc,
{ 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
};
/***************************\
* RF2315/RF2316 (Cobra SoC) *
\***************************/
/* BANK 6 len pos col */
#define AR5K_RF2316_OB_2GHZ { 3, 178, 0 }
#define AR5K_RF2316_DB_2GHZ { 3, 175, 0 }
static const struct ath5k_rf_reg rf_regs_2316[] = {
{6, AR5K_RF_OB_2GHZ, AR5K_RF2316_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF2316_DB_2GHZ},
};
/* Default mode specific settings */
static const struct ath5k_ini_rfbuffer rfb_2316[] = {
{ 1, 0x98d4,
/* mode a/XR mode aTurbo mode b mode g mode gTurbo */
{ 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
{ 2, 0x98d0,
{ 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } },
{ 3, 0x98dc,
{ 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000 } },
{ 6, 0x989c,
{ 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } },
{ 6, 0x989c,
{ 0x02000000, 0x02000000, 0x02000000, 0x02000000, 0x02000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0xf8000000, 0xf8000000, 0xf8000000, 0xf8000000, 0xf8000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x95150000, 0x95150000, 0x95150000, 0x95150000, 0x95150000 } },
{ 6, 0x989c,
{ 0xc1000000, 0xc1000000, 0xc1000000, 0xc1000000, 0xc1000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00080000, 0x00080000, 0x00080000, 0x00080000, 0x00080000 } },
{ 6, 0x989c,
{ 0x00d50000, 0x00d50000, 0x00d50000, 0x00d50000, 0x00d50000 } },
{ 6, 0x989c,
{ 0x000e0000, 0x000e0000, 0x000e0000, 0x000e0000, 0x000e0000 } },
{ 6, 0x989c,
{ 0x00dc0000, 0x00dc0000, 0x00dc0000, 0x00dc0000, 0x00dc0000 } },
{ 6, 0x989c,
{ 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } },
{ 6, 0x989c,
{ 0x008a0000, 0x008a0000, 0x008a0000, 0x008a0000, 0x008a0000 } },
{ 6, 0x989c,
{ 0x10880000, 0x10880000, 0x10880000, 0x10880000, 0x10880000 } },
{ 6, 0x989c,
{ 0x008c0060, 0x008c0060, 0x008c0060, 0x008c0060, 0x008c0060 } },
{ 6, 0x989c,
{ 0x00a00000, 0x00a00000, 0x00a00080, 0x00a00080, 0x00a00080 } },
{ 6, 0x989c,
{ 0x00400000, 0x00400000, 0x0040000d, 0x0040000d, 0x0040000d } },
{ 6, 0x989c,
{ 0x00110400, 0x00110400, 0x00110400, 0x00110400, 0x00110400 } },
{ 6, 0x989c,
{ 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
{ 6, 0x989c,
{ 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
{ 6, 0x989c,
{ 0x00000b00, 0x00000b00, 0x00000b00, 0x00000b00, 0x00000b00 } },
{ 6, 0x989c,
{ 0x00000be8, 0x00000be8, 0x00000be8, 0x00000be8, 0x00000be8 } },
{ 6, 0x98c0,
{ 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } },
{ 7, 0x989c,
{ 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
{ 7, 0x989c,
{ 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
{ 7, 0x98cc,
{ 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
};
/******************************\
* RF5413/RF5424 (Eagle/Condor) *
\******************************/
/* BANK 6 len pos col */
#define AR5K_RF5413_OB_2GHZ { 3, 241, 0 }
#define AR5K_RF5413_DB_2GHZ { 3, 238, 0 }
#define AR5K_RF5413_OB_5GHZ { 3, 247, 0 }
#define AR5K_RF5413_DB_5GHZ { 3, 244, 0 }
#define AR5K_RF5413_PWD_ICLOBUF2G { 3, 131, 3 }
#define AR5K_RF5413_DERBY_CHAN_SEL_MODE { 1, 291, 2 }
static const struct ath5k_rf_reg rf_regs_5413[] = {
{6, AR5K_RF_OB_2GHZ, AR5K_RF5413_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF5413_DB_2GHZ},
{6, AR5K_RF_OB_5GHZ, AR5K_RF5413_OB_5GHZ},
{6, AR5K_RF_DB_5GHZ, AR5K_RF5413_DB_5GHZ},
{6, AR5K_RF_PWD_ICLOBUF_2G, AR5K_RF5413_PWD_ICLOBUF2G},
{6, AR5K_RF_DERBY_CHAN_SEL_MODE, AR5K_RF5413_DERBY_CHAN_SEL_MODE},
};
/* Default mode specific settings */
static const struct ath5k_ini_rfbuffer rfb_5413[] = {
{ 1, 0x98d4,
/* mode a/XR mode aTurbo mode b mode g mode gTurbo */
{ 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
{ 2, 0x98d0,
{ 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } },
{ 3, 0x98dc,
{ 0x00a000c0, 0x00a000c0, 0x00e000c0, 0x00e000c0, 0x00e000c0 } },
{ 6, 0x989c,
{ 0x33000000, 0x33000000, 0x33000000, 0x33000000, 0x33000000 } },
{ 6, 0x989c,
{ 0x01000000, 0x01000000, 0x01000000, 0x01000000, 0x01000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000 } },
{ 6, 0x989c,
{ 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000 } },
{ 6, 0x989c,
{ 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } },
{ 6, 0x989c,
{ 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } },
{ 6, 0x989c,
{ 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000 } },
{ 6, 0x989c,
{ 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
{ 6, 0x989c,
{ 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
{ 6, 0x989c,
{ 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
{ 6, 0x989c,
{ 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
{ 6, 0x989c,
{ 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000 } },
{ 6, 0x989c,
{ 0x00610000, 0x00610000, 0x00610000, 0x00610000, 0x00610000 } },
{ 6, 0x989c,
{ 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000 } },
{ 6, 0x989c,
{ 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000 } },
{ 6, 0x989c,
{ 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000 } },
{ 6, 0x989c,
{ 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000 } },
{ 6, 0x989c,
{ 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } },
{ 6, 0x989c,
{ 0x00440000, 0x00440000, 0x00440000, 0x00440000, 0x00440000 } },
{ 6, 0x989c,
{ 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } },
{ 6, 0x989c,
{ 0x00100080, 0x00100080, 0x00100080, 0x00100080, 0x00100080 } },
{ 6, 0x989c,
{ 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034 } },
{ 6, 0x989c,
{ 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0 } },
{ 6, 0x989c,
{ 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f } },
{ 6, 0x989c,
{ 0x00510040, 0x00510040, 0x00510040, 0x00510040, 0x00510040 } },
{ 6, 0x989c,
{ 0x005000da, 0x005000da, 0x005000da, 0x005000da, 0x005000da } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00004044, 0x00004044, 0x00004044, 0x00004044, 0x00004044 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0 } },
{ 6, 0x989c,
{ 0x00002c00, 0x00002c00, 0x00003600, 0x00003600, 0x00002c00 } },
{ 6, 0x98c8,
{ 0x00000403, 0x00000403, 0x00040403, 0x00040403, 0x00040403 } },
{ 7, 0x989c,
{ 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
{ 7, 0x989c,
{ 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
{ 7, 0x98cc,
{ 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
};
/***************************\
* RF2425/RF2417 (Swan/Nala) *
* AR2317 (Spider SoC) *
\***************************/
/* BANK 6 len pos col */
#define AR5K_RF2425_OB_2GHZ { 3, 193, 0 }
#define AR5K_RF2425_DB_2GHZ { 3, 190, 0 }
static const struct ath5k_rf_reg rf_regs_2425[] = {
{6, AR5K_RF_OB_2GHZ, AR5K_RF2425_OB_2GHZ},
{6, AR5K_RF_DB_2GHZ, AR5K_RF2425_DB_2GHZ},
};
/* Default mode specific settings
* XXX: a/aTurbo ?
*/
static const struct ath5k_ini_rfbuffer rfb_2425[] = {
{ 1, 0x98d4,
/* mode a/XR mode aTurbo mode b mode g mode gTurbo */
{ 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
{ 2, 0x98d0,
{ 0x02001408, 0x02001408, 0x02001408, 0x02001408, 0x02001408 } },
{ 3, 0x98dc,
{ 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
{ 6, 0x989c,
{ 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } },
{ 6, 0x989c,
{ 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } },
{ 6, 0x989c,
{ 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
{ 6, 0x989c,
{ 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } },
{ 6, 0x989c,
{ 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000 } },
{ 6, 0x989c,
{ 0x00140000, 0x00140000, 0x00140000, 0x00140000, 0x00140000 } },
{ 6, 0x989c,
{ 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } },
{ 6, 0x989c,
{ 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a } },
{ 6, 0x989c,
{ 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } },
{ 6, 0x989c,
{ 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } },
{ 6, 0x989c,
{ 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } },
{ 6, 0x989c,
{ 0x00001688, 0x00001688, 0x00001688, 0x00001688, 0x00001688 } },
{ 6, 0x98c4,
{ 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
{ 7, 0x989c,
{ 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
{ 7, 0x989c,
{ 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
{ 7, 0x98cc,
{ 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
};
/*
* TODO: Handle the few differences with swan during
* bank modification and get rid of this
*/
static const struct ath5k_ini_rfbuffer rfb_2317[] = {
{ 1, 0x98d4,
/* mode a/XR mode aTurbo mode b mode g mode gTurbo */
{ 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
{ 2, 0x98d0,
{ 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } },
{ 3, 0x98dc,
{ 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
{ 6, 0x989c,
{ 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } },
{ 6, 0x989c,
{ 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } },
{ 6, 0x989c,
{ 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
{ 6, 0x989c,
{ 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } },
{ 6, 0x989c,
{ 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000 } },
{ 6, 0x989c,
{ 0x00140100, 0x00140100, 0x00140100, 0x00140100, 0x00140100 } },
{ 6, 0x989c,
{ 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } },
{ 6, 0x989c,
{ 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a } },
{ 6, 0x989c,
{ 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } },
{ 6, 0x989c,
{ 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } },
{ 6, 0x989c,
{ 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } },
{ 6, 0x989c,
{ 0x00009688, 0x00009688, 0x00009688, 0x00009688, 0x00009688 } },
{ 6, 0x98c4,
{ 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
{ 7, 0x989c,
{ 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
{ 7, 0x989c,
{ 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
{ 7, 0x98cc,
{ 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
};
/*
* TODO: Handle the few differences with swan during
* bank modification and get rid of this
* XXX: a/aTurbo ?
*/
static const struct ath5k_ini_rfbuffer rfb_2417[] = {
{ 1, 0x98d4,
/* mode a/XR mode aTurbo mode b mode g mode gTurbo */
{ 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
{ 2, 0x98d0,
{ 0x02001408, 0x02001408, 0x02001408, 0x02001408, 0x02001408 } },
{ 3, 0x98dc,
{ 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
{ 6, 0x989c,
{ 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } },
{ 6, 0x989c,
{ 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } },
{ 6, 0x989c,
{ 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
{ 6, 0x989c,
{ 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } },
{ 6, 0x989c,
{ 0x00e70000, 0x00e70000, 0x80e70000, 0x80e70000, 0x00e70000 } },
{ 6, 0x989c,
{ 0x00140000, 0x00140000, 0x00140000, 0x00140000, 0x00140000 } },
{ 6, 0x989c,
{ 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } },
{ 6, 0x989c,
{ 0x0007001a, 0x0007001a, 0x0207001a, 0x0207001a, 0x0007001a } },
{ 6, 0x989c,
{ 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } },
{ 6, 0x989c,
{ 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } },
{ 6, 0x989c,
{ 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ 6, 0x989c,
{ 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } },
{ 6, 0x989c,
{ 0x00001688, 0x00001688, 0x00001688, 0x00001688, 0x00001688 } },
{ 6, 0x98c4,
{ 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
{ 7, 0x989c,
{ 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
{ 7, 0x989c,
{ 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
{ 7, 0x98cc,
{ 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
};