OpenCloudOS-Kernel/drivers/char/tpm/tpm_tis.c

895 lines
22 KiB
C
Raw Normal View History

/*
* Copyright (C) 2005, 2006 IBM Corporation
*
* Authors:
* Leendert van Doorn <leendert@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
*
* This device driver implements the TPM interface as defined in
* the TCG TPM Interface Spec version 1.2, revision 1.0.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2 of the
* License.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pnp.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/acpi.h>
#include <linux/freezer.h>
#include "tpm.h"
enum tis_access {
TPM_ACCESS_VALID = 0x80,
TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
TPM_ACCESS_REQUEST_PENDING = 0x04,
TPM_ACCESS_REQUEST_USE = 0x02,
};
enum tis_status {
TPM_STS_VALID = 0x80,
TPM_STS_COMMAND_READY = 0x40,
TPM_STS_GO = 0x20,
TPM_STS_DATA_AVAIL = 0x10,
TPM_STS_DATA_EXPECT = 0x08,
};
enum tis_int_flags {
TPM_GLOBAL_INT_ENABLE = 0x80000000,
TPM_INTF_BURST_COUNT_STATIC = 0x100,
TPM_INTF_CMD_READY_INT = 0x080,
TPM_INTF_INT_EDGE_FALLING = 0x040,
TPM_INTF_INT_EDGE_RISING = 0x020,
TPM_INTF_INT_LEVEL_LOW = 0x010,
TPM_INTF_INT_LEVEL_HIGH = 0x008,
TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
TPM_INTF_STS_VALID_INT = 0x002,
TPM_INTF_DATA_AVAIL_INT = 0x001,
};
enum tis_defaults {
TIS_MEM_BASE = 0xFED40000,
TIS_MEM_LEN = 0x5000,
TIS_SHORT_TIMEOUT = 750, /* ms */
TIS_LONG_TIMEOUT = 2000, /* 2 sec */
};
#define TPM_ACCESS(l) (0x0000 | ((l) << 12))
#define TPM_INT_ENABLE(l) (0x0008 | ((l) << 12))
#define TPM_INT_VECTOR(l) (0x000C | ((l) << 12))
#define TPM_INT_STATUS(l) (0x0010 | ((l) << 12))
#define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
#define TPM_STS(l) (0x0018 | ((l) << 12))
#define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
#define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
#define TPM_RID(l) (0x0F04 | ((l) << 12))
static LIST_HEAD(tis_chips);
static DEFINE_MUTEX(tis_lock);
#if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
static int is_itpm(struct pnp_dev *dev)
{
struct acpi_device *acpi = pnp_acpi_device(dev);
struct acpi_hardware_id *id;
list_for_each_entry(id, &acpi->pnp.ids, list) {
if (!strcmp("INTC0102", id->id))
return 1;
}
return 0;
}
#else
static inline int is_itpm(struct pnp_dev *dev)
{
return 0;
}
#endif
static int check_locality(struct tpm_chip *chip, int l)
{
if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
return chip->vendor.locality = l;
return -1;
}
static void release_locality(struct tpm_chip *chip, int l, int force)
{
if (force || (ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
(TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) ==
(TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID))
iowrite8(TPM_ACCESS_ACTIVE_LOCALITY,
chip->vendor.iobase + TPM_ACCESS(l));
}
static int request_locality(struct tpm_chip *chip, int l)
{
unsigned long stop, timeout;
long rc;
if (check_locality(chip, l) >= 0)
return l;
iowrite8(TPM_ACCESS_REQUEST_USE,
chip->vendor.iobase + TPM_ACCESS(l));
stop = jiffies + chip->vendor.timeout_a;
if (chip->vendor.irq) {
again:
timeout = stop - jiffies;
if ((long)timeout <= 0)
return -1;
rc = wait_event_interruptible_timeout(chip->vendor.int_queue,
(check_locality
(chip, l) >= 0),
timeout);
if (rc > 0)
return l;
if (rc == -ERESTARTSYS && freezing(current)) {
clear_thread_flag(TIF_SIGPENDING);
goto again;
}
} else {
/* wait for burstcount */
do {
if (check_locality(chip, l) >= 0)
return l;
msleep(TPM_TIMEOUT);
}
while (time_before(jiffies, stop));
}
return -1;
}
static u8 tpm_tis_status(struct tpm_chip *chip)
{
return ioread8(chip->vendor.iobase +
TPM_STS(chip->vendor.locality));
}
static void tpm_tis_ready(struct tpm_chip *chip)
{
/* this causes the current command to be aborted */
iowrite8(TPM_STS_COMMAND_READY,
chip->vendor.iobase + TPM_STS(chip->vendor.locality));
}
static int get_burstcount(struct tpm_chip *chip)
{
unsigned long stop;
int burstcnt;
/* wait for burstcount */
/* which timeout value, spec has 2 answers (c & d) */
stop = jiffies + chip->vendor.timeout_d;
do {
burstcnt = ioread8(chip->vendor.iobase +
TPM_STS(chip->vendor.locality) + 1);
burstcnt += ioread8(chip->vendor.iobase +
TPM_STS(chip->vendor.locality) +
2) << 8;
if (burstcnt)
return burstcnt;
msleep(TPM_TIMEOUT);
} while (time_before(jiffies, stop));
return -EBUSY;
}
static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
{
int size = 0, burstcnt;
while (size < count &&
wait_for_tpm_stat(chip,
TPM_STS_DATA_AVAIL | TPM_STS_VALID,
chip->vendor.timeout_c,
&chip->vendor.read_queue)
== 0) {
burstcnt = get_burstcount(chip);
for (; burstcnt > 0 && size < count; burstcnt--)
buf[size++] = ioread8(chip->vendor.iobase +
TPM_DATA_FIFO(chip->vendor.
locality));
}
return size;
}
static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
{
int size = 0;
int expected, status;
if (count < TPM_HEADER_SIZE) {
size = -EIO;
goto out;
}
/* read first 10 bytes, including tag, paramsize, and result */
if ((size =
recv_data(chip, buf, TPM_HEADER_SIZE)) < TPM_HEADER_SIZE) {
dev_err(chip->dev, "Unable to read header\n");
goto out;
}
expected = be32_to_cpu(*(__be32 *) (buf + 2));
if (expected > count) {
size = -EIO;
goto out;
}
if ((size +=
recv_data(chip, &buf[TPM_HEADER_SIZE],
expected - TPM_HEADER_SIZE)) < expected) {
dev_err(chip->dev, "Unable to read remainder of result\n");
size = -ETIME;
goto out;
}
wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
&chip->vendor.int_queue);
status = tpm_tis_status(chip);
if (status & TPM_STS_DATA_AVAIL) { /* retry? */
dev_err(chip->dev, "Error left over data\n");
size = -EIO;
goto out;
}
out:
tpm_tis_ready(chip);
release_locality(chip, chip->vendor.locality, 0);
return size;
}
static bool itpm;
module_param(itpm, bool, 0444);
MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
/*
* If interrupts are used (signaled by an irq set in the vendor structure)
* tpm.c can skip polling for the data to be available as the interrupt is
* waited for here
*/
static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
{
int rc, status, burstcnt;
size_t count = 0;
if (request_locality(chip, 0) < 0)
return -EBUSY;
status = tpm_tis_status(chip);
if ((status & TPM_STS_COMMAND_READY) == 0) {
tpm_tis_ready(chip);
if (wait_for_tpm_stat
(chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
&chip->vendor.int_queue) < 0) {
rc = -ETIME;
goto out_err;
}
}
while (count < len - 1) {
burstcnt = get_burstcount(chip);
for (; burstcnt > 0 && count < len - 1; burstcnt--) {
iowrite8(buf[count], chip->vendor.iobase +
TPM_DATA_FIFO(chip->vendor.locality));
count++;
}
wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
&chip->vendor.int_queue);
status = tpm_tis_status(chip);
if (!itpm && (status & TPM_STS_DATA_EXPECT) == 0) {
rc = -EIO;
goto out_err;
}
}
/* write last byte */
iowrite8(buf[count],
chip->vendor.iobase + TPM_DATA_FIFO(chip->vendor.locality));
wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
&chip->vendor.int_queue);
status = tpm_tis_status(chip);
if ((status & TPM_STS_DATA_EXPECT) != 0) {
rc = -EIO;
goto out_err;
}
return 0;
out_err:
tpm_tis_ready(chip);
release_locality(chip, chip->vendor.locality, 0);
return rc;
}
/*
* If interrupts are used (signaled by an irq set in the vendor structure)
* tpm.c can skip polling for the data to be available as the interrupt is
* waited for here
*/
static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
{
int rc;
u32 ordinal;
rc = tpm_tis_send_data(chip, buf, len);
if (rc < 0)
return rc;
/* go and do it */
iowrite8(TPM_STS_GO,
chip->vendor.iobase + TPM_STS(chip->vendor.locality));
if (chip->vendor.irq) {
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
if (wait_for_tpm_stat
(chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
tpm_calc_ordinal_duration(chip, ordinal),
&chip->vendor.read_queue) < 0) {
rc = -ETIME;
goto out_err;
}
}
return len;
out_err:
tpm_tis_ready(chip);
release_locality(chip, chip->vendor.locality, 0);
return rc;
}
/*
* Early probing for iTPM with STS_DATA_EXPECT flaw.
* Try sending command without itpm flag set and if that
* fails, repeat with itpm flag set.
*/
static int probe_itpm(struct tpm_chip *chip)
{
int rc = 0;
u8 cmd_getticks[] = {
0x00, 0xc1, 0x00, 0x00, 0x00, 0x0a,
0x00, 0x00, 0x00, 0xf1
};
size_t len = sizeof(cmd_getticks);
bool rem_itpm = itpm;
u16 vendor = ioread16(chip->vendor.iobase + TPM_DID_VID(0));
/* probe only iTPMS */
if (vendor != TPM_VID_INTEL)
return 0;
itpm = 0;
rc = tpm_tis_send_data(chip, cmd_getticks, len);
if (rc == 0)
goto out;
tpm_tis_ready(chip);
release_locality(chip, chip->vendor.locality, 0);
itpm = 1;
rc = tpm_tis_send_data(chip, cmd_getticks, len);
if (rc == 0) {
dev_info(chip->dev, "Detected an iTPM.\n");
rc = 1;
} else
rc = -EFAULT;
out:
itpm = rem_itpm;
tpm_tis_ready(chip);
release_locality(chip, chip->vendor.locality, 0);
return rc;
}
static const struct file_operations tis_ops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.open = tpm_open,
.read = tpm_read,
.write = tpm_write,
.release = tpm_release,
};
static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL);
static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL);
static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL);
static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated,
NULL);
static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
static DEVICE_ATTR(durations, S_IRUGO, tpm_show_durations, NULL);
static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL);
static struct attribute *tis_attrs[] = {
&dev_attr_pubek.attr,
&dev_attr_pcrs.attr,
&dev_attr_enabled.attr,
&dev_attr_active.attr,
&dev_attr_owned.attr,
&dev_attr_temp_deactivated.attr,
&dev_attr_caps.attr,
&dev_attr_cancel.attr,
&dev_attr_durations.attr,
&dev_attr_timeouts.attr, NULL,
};
static struct attribute_group tis_attr_grp = {
.attrs = tis_attrs
};
static struct tpm_vendor_specific tpm_tis = {
.status = tpm_tis_status,
.recv = tpm_tis_recv,
.send = tpm_tis_send,
.cancel = tpm_tis_ready,
.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
.req_canceled = TPM_STS_COMMAND_READY,
.attr_group = &tis_attr_grp,
.miscdev = {
.fops = &tis_ops,},
};
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t tis_int_probe(int irq, void *dev_id)
{
struct tpm_chip *chip = dev_id;
u32 interrupt;
interrupt = ioread32(chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality));
if (interrupt == 0)
return IRQ_NONE;
tpm_tis: Fix the probing for interrupts This patch fixes several aspects of the probing for interrupts. This patch reads the TPM's timeouts before probing for the interrupts. The tpm_get_timeouts() function is invoked in polling mode and gets the proper timeouts from the TPM so that we don't need to fall back to 2 minutes timeouts for short duration commands while the interrupt probing is happening. This patch introduces a variable probed_irq into the vendor structure that gets the irq number if an interrupt is received while the the tpm_gen_interrupt() function is run in polling mode during interrupt probing. Previously some parts of tpm_gen_interrupt() were run in polling mode, then the irq variable was set in the interrupt handler when an interrupt was received and execution of tpm_gen_interrupt() ended up switching over to interrupt mode. tpm_gen_interrupt() execution ended up on an event queue where it eventually timed out since the probing handler doesn't wake any queues. Before calling into free_irq() clear all interrupt flags that may have been set by the TPM. The reason is that free_irq() will call into the probing interrupt handler and may otherwise fool us into thinking that a real interrupt happened (because we see the flags as being set) while the TPM's interrupt line is not even connected to anything on the motherboard. This solves a problem on one machine I did testing on (Thinkpad T60). If a TPM claims to use a specifc interrupt, the probing is done as well to verify that the interrupt is actually working. If a TPM indicates that it does not use a specific interrupt (returns '0'), probe all interrupts from 3 to 15. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-03-31 00:13:32 +08:00
chip->vendor.probed_irq = irq;
/* Clear interrupts handled with TPM_EOI */
iowrite32(interrupt,
chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality));
return IRQ_HANDLED;
}
static irqreturn_t tis_int_handler(int dummy, void *dev_id)
{
struct tpm_chip *chip = dev_id;
u32 interrupt;
int i;
interrupt = ioread32(chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality));
if (interrupt == 0)
return IRQ_NONE;
if (interrupt & TPM_INTF_DATA_AVAIL_INT)
wake_up_interruptible(&chip->vendor.read_queue);
if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
for (i = 0; i < 5; i++)
if (check_locality(chip, i) >= 0)
break;
if (interrupt &
(TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT |
TPM_INTF_CMD_READY_INT))
wake_up_interruptible(&chip->vendor.int_queue);
/* Clear interrupts handled with TPM_EOI */
iowrite32(interrupt,
chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality));
ioread32(chip->vendor.iobase + TPM_INT_STATUS(chip->vendor.locality));
return IRQ_HANDLED;
}
static bool interrupts = 1;
module_param(interrupts, bool, 0444);
MODULE_PARM_DESC(interrupts, "Enable interrupts");
static int tpm_tis_init(struct device *dev, resource_size_t start,
resource_size_t len, unsigned int irq)
{
u32 vendor, intfcaps, intmask;
int rc, i, irq_s, irq_e, probe;
struct tpm_chip *chip;
if (!(chip = tpm_register_hardware(dev, &tpm_tis)))
return -ENODEV;
chip->vendor.iobase = ioremap(start, len);
if (!chip->vendor.iobase) {
rc = -EIO;
goto out_err;
}
/* Default timeouts */
chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
if (request_locality(chip, 0) != 0) {
rc = -ENODEV;
goto out_err;
}
vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
dev_info(dev,
"1.2 TPM (device-id 0x%X, rev-id %d)\n",
vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
if (!itpm) {
probe = probe_itpm(chip);
if (probe < 0) {
rc = -ENODEV;
goto out_err;
}
itpm = (probe == 0) ? 0 : 1;
}
if (itpm)
dev_info(dev, "Intel iTPM workaround enabled\n");
/* Figure out the capabilities */
intfcaps =
ioread32(chip->vendor.iobase +
TPM_INTF_CAPS(chip->vendor.locality));
dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
intfcaps);
if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
dev_dbg(dev, "\tBurst Count Static\n");
if (intfcaps & TPM_INTF_CMD_READY_INT)
dev_dbg(dev, "\tCommand Ready Int Support\n");
if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
dev_dbg(dev, "\tInterrupt Edge Falling\n");
if (intfcaps & TPM_INTF_INT_EDGE_RISING)
dev_dbg(dev, "\tInterrupt Edge Rising\n");
if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
dev_dbg(dev, "\tInterrupt Level Low\n");
if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
dev_dbg(dev, "\tInterrupt Level High\n");
if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
dev_dbg(dev, "\tLocality Change Int Support\n");
if (intfcaps & TPM_INTF_STS_VALID_INT)
dev_dbg(dev, "\tSts Valid Int Support\n");
if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
dev_dbg(dev, "\tData Avail Int Support\n");
tpm_tis: Fix the probing for interrupts This patch fixes several aspects of the probing for interrupts. This patch reads the TPM's timeouts before probing for the interrupts. The tpm_get_timeouts() function is invoked in polling mode and gets the proper timeouts from the TPM so that we don't need to fall back to 2 minutes timeouts for short duration commands while the interrupt probing is happening. This patch introduces a variable probed_irq into the vendor structure that gets the irq number if an interrupt is received while the the tpm_gen_interrupt() function is run in polling mode during interrupt probing. Previously some parts of tpm_gen_interrupt() were run in polling mode, then the irq variable was set in the interrupt handler when an interrupt was received and execution of tpm_gen_interrupt() ended up switching over to interrupt mode. tpm_gen_interrupt() execution ended up on an event queue where it eventually timed out since the probing handler doesn't wake any queues. Before calling into free_irq() clear all interrupt flags that may have been set by the TPM. The reason is that free_irq() will call into the probing interrupt handler and may otherwise fool us into thinking that a real interrupt happened (because we see the flags as being set) while the TPM's interrupt line is not even connected to anything on the motherboard. This solves a problem on one machine I did testing on (Thinkpad T60). If a TPM claims to use a specifc interrupt, the probing is done as well to verify that the interrupt is actually working. If a TPM indicates that it does not use a specific interrupt (returns '0'), probe all interrupts from 3 to 15. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-03-31 00:13:32 +08:00
/* get the timeouts before testing for irqs */
if (tpm_get_timeouts(chip)) {
dev_err(dev, "Could not get TPM timeouts and durations\n");
rc = -ENODEV;
goto out_err;
}
tpm_tis: Fix the probing for interrupts This patch fixes several aspects of the probing for interrupts. This patch reads the TPM's timeouts before probing for the interrupts. The tpm_get_timeouts() function is invoked in polling mode and gets the proper timeouts from the TPM so that we don't need to fall back to 2 minutes timeouts for short duration commands while the interrupt probing is happening. This patch introduces a variable probed_irq into the vendor structure that gets the irq number if an interrupt is received while the the tpm_gen_interrupt() function is run in polling mode during interrupt probing. Previously some parts of tpm_gen_interrupt() were run in polling mode, then the irq variable was set in the interrupt handler when an interrupt was received and execution of tpm_gen_interrupt() ended up switching over to interrupt mode. tpm_gen_interrupt() execution ended up on an event queue where it eventually timed out since the probing handler doesn't wake any queues. Before calling into free_irq() clear all interrupt flags that may have been set by the TPM. The reason is that free_irq() will call into the probing interrupt handler and may otherwise fool us into thinking that a real interrupt happened (because we see the flags as being set) while the TPM's interrupt line is not even connected to anything on the motherboard. This solves a problem on one machine I did testing on (Thinkpad T60). If a TPM claims to use a specifc interrupt, the probing is done as well to verify that the interrupt is actually working. If a TPM indicates that it does not use a specific interrupt (returns '0'), probe all interrupts from 3 to 15. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-03-31 00:13:32 +08:00
if (tpm_do_selftest(chip)) {
dev_err(dev, "TPM self test failed\n");
rc = -ENODEV;
goto out_err;
}
/* INTERRUPT Setup */
init_waitqueue_head(&chip->vendor.read_queue);
init_waitqueue_head(&chip->vendor.int_queue);
intmask =
ioread32(chip->vendor.iobase +
TPM_INT_ENABLE(chip->vendor.locality));
intmask |= TPM_INTF_CMD_READY_INT
| TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
| TPM_INTF_STS_VALID_INT;
iowrite32(intmask,
chip->vendor.iobase +
TPM_INT_ENABLE(chip->vendor.locality));
if (interrupts)
chip->vendor.irq = irq;
if (interrupts && !chip->vendor.irq) {
tpm_tis: Fix the probing for interrupts This patch fixes several aspects of the probing for interrupts. This patch reads the TPM's timeouts before probing for the interrupts. The tpm_get_timeouts() function is invoked in polling mode and gets the proper timeouts from the TPM so that we don't need to fall back to 2 minutes timeouts for short duration commands while the interrupt probing is happening. This patch introduces a variable probed_irq into the vendor structure that gets the irq number if an interrupt is received while the the tpm_gen_interrupt() function is run in polling mode during interrupt probing. Previously some parts of tpm_gen_interrupt() were run in polling mode, then the irq variable was set in the interrupt handler when an interrupt was received and execution of tpm_gen_interrupt() ended up switching over to interrupt mode. tpm_gen_interrupt() execution ended up on an event queue where it eventually timed out since the probing handler doesn't wake any queues. Before calling into free_irq() clear all interrupt flags that may have been set by the TPM. The reason is that free_irq() will call into the probing interrupt handler and may otherwise fool us into thinking that a real interrupt happened (because we see the flags as being set) while the TPM's interrupt line is not even connected to anything on the motherboard. This solves a problem on one machine I did testing on (Thinkpad T60). If a TPM claims to use a specifc interrupt, the probing is done as well to verify that the interrupt is actually working. If a TPM indicates that it does not use a specific interrupt (returns '0'), probe all interrupts from 3 to 15. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-03-31 00:13:32 +08:00
irq_s =
ioread8(chip->vendor.iobase +
TPM_INT_VECTOR(chip->vendor.locality));
tpm_tis: Fix the probing for interrupts This patch fixes several aspects of the probing for interrupts. This patch reads the TPM's timeouts before probing for the interrupts. The tpm_get_timeouts() function is invoked in polling mode and gets the proper timeouts from the TPM so that we don't need to fall back to 2 minutes timeouts for short duration commands while the interrupt probing is happening. This patch introduces a variable probed_irq into the vendor structure that gets the irq number if an interrupt is received while the the tpm_gen_interrupt() function is run in polling mode during interrupt probing. Previously some parts of tpm_gen_interrupt() were run in polling mode, then the irq variable was set in the interrupt handler when an interrupt was received and execution of tpm_gen_interrupt() ended up switching over to interrupt mode. tpm_gen_interrupt() execution ended up on an event queue where it eventually timed out since the probing handler doesn't wake any queues. Before calling into free_irq() clear all interrupt flags that may have been set by the TPM. The reason is that free_irq() will call into the probing interrupt handler and may otherwise fool us into thinking that a real interrupt happened (because we see the flags as being set) while the TPM's interrupt line is not even connected to anything on the motherboard. This solves a problem on one machine I did testing on (Thinkpad T60). If a TPM claims to use a specifc interrupt, the probing is done as well to verify that the interrupt is actually working. If a TPM indicates that it does not use a specific interrupt (returns '0'), probe all interrupts from 3 to 15. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-03-31 00:13:32 +08:00
if (irq_s) {
irq_e = irq_s;
} else {
irq_s = 3;
irq_e = 15;
}
tpm_tis: Fix the probing for interrupts This patch fixes several aspects of the probing for interrupts. This patch reads the TPM's timeouts before probing for the interrupts. The tpm_get_timeouts() function is invoked in polling mode and gets the proper timeouts from the TPM so that we don't need to fall back to 2 minutes timeouts for short duration commands while the interrupt probing is happening. This patch introduces a variable probed_irq into the vendor structure that gets the irq number if an interrupt is received while the the tpm_gen_interrupt() function is run in polling mode during interrupt probing. Previously some parts of tpm_gen_interrupt() were run in polling mode, then the irq variable was set in the interrupt handler when an interrupt was received and execution of tpm_gen_interrupt() ended up switching over to interrupt mode. tpm_gen_interrupt() execution ended up on an event queue where it eventually timed out since the probing handler doesn't wake any queues. Before calling into free_irq() clear all interrupt flags that may have been set by the TPM. The reason is that free_irq() will call into the probing interrupt handler and may otherwise fool us into thinking that a real interrupt happened (because we see the flags as being set) while the TPM's interrupt line is not even connected to anything on the motherboard. This solves a problem on one machine I did testing on (Thinkpad T60). If a TPM claims to use a specifc interrupt, the probing is done as well to verify that the interrupt is actually working. If a TPM indicates that it does not use a specific interrupt (returns '0'), probe all interrupts from 3 to 15. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-03-31 00:13:32 +08:00
for (i = irq_s; i <= irq_e && chip->vendor.irq == 0; i++) {
iowrite8(i, chip->vendor.iobase +
tpm_tis: Fix the probing for interrupts This patch fixes several aspects of the probing for interrupts. This patch reads the TPM's timeouts before probing for the interrupts. The tpm_get_timeouts() function is invoked in polling mode and gets the proper timeouts from the TPM so that we don't need to fall back to 2 minutes timeouts for short duration commands while the interrupt probing is happening. This patch introduces a variable probed_irq into the vendor structure that gets the irq number if an interrupt is received while the the tpm_gen_interrupt() function is run in polling mode during interrupt probing. Previously some parts of tpm_gen_interrupt() were run in polling mode, then the irq variable was set in the interrupt handler when an interrupt was received and execution of tpm_gen_interrupt() ended up switching over to interrupt mode. tpm_gen_interrupt() execution ended up on an event queue where it eventually timed out since the probing handler doesn't wake any queues. Before calling into free_irq() clear all interrupt flags that may have been set by the TPM. The reason is that free_irq() will call into the probing interrupt handler and may otherwise fool us into thinking that a real interrupt happened (because we see the flags as being set) while the TPM's interrupt line is not even connected to anything on the motherboard. This solves a problem on one machine I did testing on (Thinkpad T60). If a TPM claims to use a specifc interrupt, the probing is done as well to verify that the interrupt is actually working. If a TPM indicates that it does not use a specific interrupt (returns '0'), probe all interrupts from 3 to 15. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-03-31 00:13:32 +08:00
TPM_INT_VECTOR(chip->vendor.locality));
if (request_irq
(i, tis_int_probe, IRQF_SHARED,
chip->vendor.miscdev.name, chip) != 0) {
dev_info(chip->dev,
"Unable to request irq: %d for probe\n",
i);
continue;
}
/* Clear all existing */
iowrite32(ioread32
(chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality)),
chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality));
/* Turn on */
iowrite32(intmask | TPM_GLOBAL_INT_ENABLE,
chip->vendor.iobase +
TPM_INT_ENABLE(chip->vendor.locality));
tpm_tis: Fix the probing for interrupts This patch fixes several aspects of the probing for interrupts. This patch reads the TPM's timeouts before probing for the interrupts. The tpm_get_timeouts() function is invoked in polling mode and gets the proper timeouts from the TPM so that we don't need to fall back to 2 minutes timeouts for short duration commands while the interrupt probing is happening. This patch introduces a variable probed_irq into the vendor structure that gets the irq number if an interrupt is received while the the tpm_gen_interrupt() function is run in polling mode during interrupt probing. Previously some parts of tpm_gen_interrupt() were run in polling mode, then the irq variable was set in the interrupt handler when an interrupt was received and execution of tpm_gen_interrupt() ended up switching over to interrupt mode. tpm_gen_interrupt() execution ended up on an event queue where it eventually timed out since the probing handler doesn't wake any queues. Before calling into free_irq() clear all interrupt flags that may have been set by the TPM. The reason is that free_irq() will call into the probing interrupt handler and may otherwise fool us into thinking that a real interrupt happened (because we see the flags as being set) while the TPM's interrupt line is not even connected to anything on the motherboard. This solves a problem on one machine I did testing on (Thinkpad T60). If a TPM claims to use a specifc interrupt, the probing is done as well to verify that the interrupt is actually working. If a TPM indicates that it does not use a specific interrupt (returns '0'), probe all interrupts from 3 to 15. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-03-31 00:13:32 +08:00
chip->vendor.probed_irq = 0;
/* Generate Interrupts */
tpm_gen_interrupt(chip);
tpm_tis: Fix the probing for interrupts This patch fixes several aspects of the probing for interrupts. This patch reads the TPM's timeouts before probing for the interrupts. The tpm_get_timeouts() function is invoked in polling mode and gets the proper timeouts from the TPM so that we don't need to fall back to 2 minutes timeouts for short duration commands while the interrupt probing is happening. This patch introduces a variable probed_irq into the vendor structure that gets the irq number if an interrupt is received while the the tpm_gen_interrupt() function is run in polling mode during interrupt probing. Previously some parts of tpm_gen_interrupt() were run in polling mode, then the irq variable was set in the interrupt handler when an interrupt was received and execution of tpm_gen_interrupt() ended up switching over to interrupt mode. tpm_gen_interrupt() execution ended up on an event queue where it eventually timed out since the probing handler doesn't wake any queues. Before calling into free_irq() clear all interrupt flags that may have been set by the TPM. The reason is that free_irq() will call into the probing interrupt handler and may otherwise fool us into thinking that a real interrupt happened (because we see the flags as being set) while the TPM's interrupt line is not even connected to anything on the motherboard. This solves a problem on one machine I did testing on (Thinkpad T60). If a TPM claims to use a specifc interrupt, the probing is done as well to verify that the interrupt is actually working. If a TPM indicates that it does not use a specific interrupt (returns '0'), probe all interrupts from 3 to 15. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-03-31 00:13:32 +08:00
chip->vendor.irq = chip->vendor.probed_irq;
/* free_irq will call into tis_int_probe;
clear all irqs we haven't seen while doing
tpm_gen_interrupt */
iowrite32(ioread32
(chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality)),
chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality));
/* Turn off */
iowrite32(intmask,
chip->vendor.iobase +
TPM_INT_ENABLE(chip->vendor.locality));
free_irq(i, chip);
}
}
if (chip->vendor.irq) {
iowrite8(chip->vendor.irq,
chip->vendor.iobase +
TPM_INT_VECTOR(chip->vendor.locality));
if (request_irq
(chip->vendor.irq, tis_int_handler, IRQF_SHARED,
chip->vendor.miscdev.name, chip) != 0) {
dev_info(chip->dev,
"Unable to request irq: %d for use\n",
chip->vendor.irq);
chip->vendor.irq = 0;
} else {
/* Clear all existing */
iowrite32(ioread32
(chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality)),
chip->vendor.iobase +
TPM_INT_STATUS(chip->vendor.locality));
/* Turn on */
iowrite32(intmask | TPM_GLOBAL_INT_ENABLE,
chip->vendor.iobase +
TPM_INT_ENABLE(chip->vendor.locality));
}
}
INIT_LIST_HEAD(&chip->vendor.list);
mutex_lock(&tis_lock);
list_add(&chip->vendor.list, &tis_chips);
mutex_unlock(&tis_lock);
return 0;
out_err:
if (chip->vendor.iobase)
iounmap(chip->vendor.iobase);
tpm_remove_hardware(chip->dev);
return rc;
}
#if defined(CONFIG_PNP) || defined(CONFIG_PM_SLEEP)
static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
{
u32 intmask;
/* reenable interrupts that device may have lost or
BIOS/firmware may have disabled */
iowrite8(chip->vendor.irq, chip->vendor.iobase +
TPM_INT_VECTOR(chip->vendor.locality));
intmask =
ioread32(chip->vendor.iobase +
TPM_INT_ENABLE(chip->vendor.locality));
intmask |= TPM_INTF_CMD_READY_INT
| TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
| TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
iowrite32(intmask,
chip->vendor.iobase + TPM_INT_ENABLE(chip->vendor.locality));
}
#endif
#ifdef CONFIG_PNP
static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
const struct pnp_device_id *pnp_id)
{
resource_size_t start, len;
unsigned int irq = 0;
start = pnp_mem_start(pnp_dev, 0);
len = pnp_mem_len(pnp_dev, 0);
if (pnp_irq_valid(pnp_dev, 0))
irq = pnp_irq(pnp_dev, 0);
else
interrupts = 0;
if (is_itpm(pnp_dev))
itpm = 1;
return tpm_tis_init(&pnp_dev->dev, start, len, irq);
}
static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg)
{
return tpm_pm_suspend(&dev->dev);
}
static int tpm_tis_pnp_resume(struct pnp_dev *dev)
{
struct tpm_chip *chip = pnp_get_drvdata(dev);
int ret;
if (chip->vendor.irq)
tpm_tis_reenable_interrupts(chip);
ret = tpm_pm_resume(&dev->dev);
if (!ret)
tpm_do_selftest(chip);
return ret;
}
static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = {
{"PNP0C31", 0}, /* TPM */
{"ATM1200", 0}, /* Atmel */
{"IFX0102", 0}, /* Infineon */
{"BCM0101", 0}, /* Broadcom */
{"BCM0102", 0}, /* Broadcom */
{"NSC1200", 0}, /* National */
{"ICO0102", 0}, /* Intel */
/* Add new here */
{"", 0}, /* User Specified */
{"", 0} /* Terminator */
};
MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
static __devexit void tpm_tis_pnp_remove(struct pnp_dev *dev)
{
struct tpm_chip *chip = pnp_get_drvdata(dev);
tpm_dev_vendor_release(chip);
kfree(chip);
}
static struct pnp_driver tis_pnp_driver = {
.name = "tpm_tis",
.id_table = tpm_pnp_tbl,
.probe = tpm_tis_pnp_init,
.suspend = tpm_tis_pnp_suspend,
.resume = tpm_tis_pnp_resume,
.remove = tpm_tis_pnp_remove,
};
#define TIS_HID_USR_IDX sizeof(tpm_pnp_tbl)/sizeof(struct pnp_device_id) -2
module_param_string(hid, tpm_pnp_tbl[TIS_HID_USR_IDX].id,
sizeof(tpm_pnp_tbl[TIS_HID_USR_IDX].id), 0444);
MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe");
#endif
#ifdef CONFIG_PM_SLEEP
static int tpm_tis_resume(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
if (chip->vendor.irq)
tpm_tis_reenable_interrupts(chip);
return tpm_pm_resume(dev);
}
#endif
static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume);
static struct platform_driver tis_drv = {
.driver = {
.name = "tpm_tis",
.owner = THIS_MODULE,
.pm = &tpm_tis_pm,
},
};
static struct platform_device *pdev;
static bool force;
module_param(force, bool, 0444);
MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
static int __init init_tis(void)
{
int rc;
#ifdef CONFIG_PNP
if (!force)
return pnp_register_driver(&tis_pnp_driver);
#endif
rc = platform_driver_register(&tis_drv);
if (rc < 0)
return rc;
if (IS_ERR(pdev=platform_device_register_simple("tpm_tis", -1, NULL, 0)))
return PTR_ERR(pdev);
if((rc=tpm_tis_init(&pdev->dev, TIS_MEM_BASE, TIS_MEM_LEN, 0)) != 0) {
platform_device_unregister(pdev);
platform_driver_unregister(&tis_drv);
}
return rc;
}
static void __exit cleanup_tis(void)
{
struct tpm_vendor_specific *i, *j;
struct tpm_chip *chip;
mutex_lock(&tis_lock);
list_for_each_entry_safe(i, j, &tis_chips, list) {
chip = to_tpm_chip(i);
tpm_remove_hardware(chip->dev);
iowrite32(~TPM_GLOBAL_INT_ENABLE &
ioread32(chip->vendor.iobase +
TPM_INT_ENABLE(chip->vendor.
locality)),
chip->vendor.iobase +
TPM_INT_ENABLE(chip->vendor.locality));
release_locality(chip, chip->vendor.locality, 1);
if (chip->vendor.irq)
free_irq(chip->vendor.irq, chip);
iounmap(i->iobase);
list_del(&i->list);
}
mutex_unlock(&tis_lock);
#ifdef CONFIG_PNP
if (!force) {
pnp_unregister_driver(&tis_pnp_driver);
return;
}
#endif
platform_device_unregister(pdev);
platform_driver_unregister(&tis_drv);
}
module_init(init_tis);
module_exit(cleanup_tis);
MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
MODULE_DESCRIPTION("TPM Driver");
MODULE_VERSION("2.0");
MODULE_LICENSE("GPL");