OpenCloudOS-Kernel/drivers/spi/spi-dw-mmio.c

381 lines
10 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Memory-mapped interface driver for DW SPI Core
*
* Copyright (c) 2010, Octasic semiconductor.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/scatterlist.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/acpi.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include "spi-dw.h"
#define DRIVER_NAME "dw_spi_mmio"
struct dw_spi_mmio {
struct dw_spi dws;
struct clk *clk;
struct clk *pclk;
void *priv;
struct reset_control *rstc;
};
#define MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL 0x24
#define OCELOT_IF_SI_OWNER_OFFSET 4
#define JAGUAR2_IF_SI_OWNER_OFFSET 6
#define MSCC_IF_SI_OWNER_MASK GENMASK(1, 0)
#define MSCC_IF_SI_OWNER_SISL 0
#define MSCC_IF_SI_OWNER_SIBM 1
#define MSCC_IF_SI_OWNER_SIMC 2
#define MSCC_SPI_MST_SW_MODE 0x14
#define MSCC_SPI_MST_SW_MODE_SW_PIN_CTRL_MODE BIT(13)
#define MSCC_SPI_MST_SW_MODE_SW_SPI_CS(x) (x << 5)
#define SPARX5_FORCE_ENA 0xa4
#define SPARX5_FORCE_VAL 0xa8
struct dw_spi_mscc {
struct regmap *syscon;
void __iomem *spi_mst; /* Not sparx5 */
};
/*
* The Designware SPI controller (referred to as master in the documentation)
* automatically deasserts chip select when the tx fifo is empty. The chip
* selects then needs to be either driven as GPIOs or, for the first 4 using
* the SPI boot controller registers. the final chip select is an OR gate
* between the Designware SPI controller and the SPI boot controller.
*/
static void dw_spi_mscc_set_cs(struct spi_device *spi, bool enable)
{
struct dw_spi *dws = spi_master_get_devdata(spi->master);
struct dw_spi_mmio *dwsmmio = container_of(dws, struct dw_spi_mmio, dws);
struct dw_spi_mscc *dwsmscc = dwsmmio->priv;
u32 cs = spi->chip_select;
if (cs < 4) {
u32 sw_mode = MSCC_SPI_MST_SW_MODE_SW_PIN_CTRL_MODE;
if (!enable)
sw_mode |= MSCC_SPI_MST_SW_MODE_SW_SPI_CS(BIT(cs));
writel(sw_mode, dwsmscc->spi_mst + MSCC_SPI_MST_SW_MODE);
}
dw_spi_set_cs(spi, enable);
}
static int dw_spi_mscc_init(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio,
const char *cpu_syscon, u32 if_si_owner_offset)
{
struct dw_spi_mscc *dwsmscc;
dwsmscc = devm_kzalloc(&pdev->dev, sizeof(*dwsmscc), GFP_KERNEL);
if (!dwsmscc)
return -ENOMEM;
dwsmscc->spi_mst = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(dwsmscc->spi_mst)) {
dev_err(&pdev->dev, "SPI_MST region map failed\n");
return PTR_ERR(dwsmscc->spi_mst);
}
dwsmscc->syscon = syscon_regmap_lookup_by_compatible(cpu_syscon);
if (IS_ERR(dwsmscc->syscon))
return PTR_ERR(dwsmscc->syscon);
/* Deassert all CS */
writel(0, dwsmscc->spi_mst + MSCC_SPI_MST_SW_MODE);
/* Select the owner of the SI interface */
regmap_update_bits(dwsmscc->syscon, MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL,
MSCC_IF_SI_OWNER_MASK << if_si_owner_offset,
MSCC_IF_SI_OWNER_SIMC << if_si_owner_offset);
dwsmmio->dws.set_cs = dw_spi_mscc_set_cs;
dwsmmio->priv = dwsmscc;
return 0;
}
static int dw_spi_mscc_ocelot_init(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio)
{
return dw_spi_mscc_init(pdev, dwsmmio, "mscc,ocelot-cpu-syscon",
OCELOT_IF_SI_OWNER_OFFSET);
}
static int dw_spi_mscc_jaguar2_init(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio)
{
return dw_spi_mscc_init(pdev, dwsmmio, "mscc,jaguar2-cpu-syscon",
JAGUAR2_IF_SI_OWNER_OFFSET);
}
/*
* The Designware SPI controller (referred to as master in the
* documentation) automatically deasserts chip select when the tx fifo
* is empty. The chip selects then needs to be driven by a CS override
* register. enable is an active low signal.
*/
static void dw_spi_sparx5_set_cs(struct spi_device *spi, bool enable)
{
struct dw_spi *dws = spi_master_get_devdata(spi->master);
struct dw_spi_mmio *dwsmmio = container_of(dws, struct dw_spi_mmio, dws);
struct dw_spi_mscc *dwsmscc = dwsmmio->priv;
u8 cs = spi->chip_select;
if (!enable) {
/* CS override drive enable */
regmap_write(dwsmscc->syscon, SPARX5_FORCE_ENA, 1);
/* Now set CSx enabled */
regmap_write(dwsmscc->syscon, SPARX5_FORCE_VAL, ~BIT(cs));
/* Allow settle */
usleep_range(1, 5);
} else {
/* CS value */
regmap_write(dwsmscc->syscon, SPARX5_FORCE_VAL, ~0);
/* Allow settle */
usleep_range(1, 5);
/* CS override drive disable */
regmap_write(dwsmscc->syscon, SPARX5_FORCE_ENA, 0);
}
dw_spi_set_cs(spi, enable);
}
static int dw_spi_mscc_sparx5_init(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio)
{
const char *syscon_name = "microchip,sparx5-cpu-syscon";
struct device *dev = &pdev->dev;
struct dw_spi_mscc *dwsmscc;
if (!IS_ENABLED(CONFIG_SPI_MUX)) {
dev_err(dev, "This driver needs CONFIG_SPI_MUX\n");
return -EOPNOTSUPP;
}
dwsmscc = devm_kzalloc(dev, sizeof(*dwsmscc), GFP_KERNEL);
if (!dwsmscc)
return -ENOMEM;
dwsmscc->syscon =
syscon_regmap_lookup_by_compatible(syscon_name);
if (IS_ERR(dwsmscc->syscon)) {
dev_err(dev, "No syscon map %s\n", syscon_name);
return PTR_ERR(dwsmscc->syscon);
}
dwsmmio->dws.set_cs = dw_spi_sparx5_set_cs;
dwsmmio->priv = dwsmscc;
return 0;
}
static int dw_spi_alpine_init(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio)
{
dwsmmio->dws.caps = DW_SPI_CAP_CS_OVERRIDE;
return 0;
}
static int dw_spi_dw_apb_init(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio)
{
dw_spi_dma_setup_generic(&dwsmmio->dws);
return 0;
}
spi: dw: Add support for DesignWare DWC_ssi This patch adds initial support for DesignWare DWC_ssi soft IP. DWC_ssi is the enhanced version of DW_apb_ssi, which is currently supported by this driver. Their registers are same, but the bit fields of register CTRLR0 are different. DWC_ssi has additional features compared to DW_apb_ssi. Major enhancements in DWC_ssi are hyper bus protocol, boot mode support and advanced XIP support. DWC_ssi is an AHB slave device, whilst DW_apb_ssi is an APB slave device. Register offset DW_ssi DW_apb_ssi CTRLR0 0x00 0x00 CTRLR1 0x04 0x04 SSIENR 0x08 0x08 MWCR 0x0c 0x0c SER 0x10 0x10 BAUDR 0x14 0x14 TXFTLR 0x18 0x18 RXFTLR 0x1c 0x1c TXFLR 0x20 0x20 RXFLR 0x24 0x24 SR 0x28 0x28 IMR 0x2c 0x2c ISR 0x30 0x30 RISR 0x34 0x34 TXOICR 0x38 0x38 RXOICR 0x3c 0x3c RXUICR 0x40 0x40 MSTICR 0x44 0x44 ICR 0x48 0x48 DMACR 0x4c 0x4c DMATDLR 0x50 0x50 DMARDLR 0x54 0x54 IDR 0x58 0x58 SSI_VERSION_ID 0x5c 0x5c DRx (0 to 35) 0x60+i*0x4 0x60+i*0x4 RX_SAMPLE_DLY 0xf0 0xf0 SPI_CTRLR0 0xf4 0xf4 TXD_DRIVE_EDGE 0xf8 0xf8 XIP_MODE_BITS 0xfc RSVD Register configuration - CTRLR0 DW_ssi DW_apb_ssi SPI_HYPERBUS_EN bit[24] NONE SPI_FRF bit[23:22] bit[22:21] DFS_32 NONE bit[20:16] CFS bit[19:16] bit[15:12] SSTE bit[14] bit[24] SRL bit[13] bit[11] SLV_OE bit[12] bit[10] TMOD bit[11:10] bit[9:8] SCPOL | SPHA bit[9:8] bit[7:6] FRF bit[7:6] bit[5:4] DFS bit[4:0] bit[3:0] The documents used are [1] DW_apb_ssi_databook.pdf version 4.01a (2016.10a). [2] DWC_ssi_databook.pdf version 1.01a. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200505130618.554-4-wan.ahmad.zainie.wan.mohamad@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-05 21:06:14 +08:00
static int dw_spi_dwc_ssi_init(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio)
{
2020-10-08 07:54:51 +08:00
dwsmmio->dws.caps = DW_SPI_CAP_DWC_SSI;
spi: dw: Add support for DesignWare DWC_ssi This patch adds initial support for DesignWare DWC_ssi soft IP. DWC_ssi is the enhanced version of DW_apb_ssi, which is currently supported by this driver. Their registers are same, but the bit fields of register CTRLR0 are different. DWC_ssi has additional features compared to DW_apb_ssi. Major enhancements in DWC_ssi are hyper bus protocol, boot mode support and advanced XIP support. DWC_ssi is an AHB slave device, whilst DW_apb_ssi is an APB slave device. Register offset DW_ssi DW_apb_ssi CTRLR0 0x00 0x00 CTRLR1 0x04 0x04 SSIENR 0x08 0x08 MWCR 0x0c 0x0c SER 0x10 0x10 BAUDR 0x14 0x14 TXFTLR 0x18 0x18 RXFTLR 0x1c 0x1c TXFLR 0x20 0x20 RXFLR 0x24 0x24 SR 0x28 0x28 IMR 0x2c 0x2c ISR 0x30 0x30 RISR 0x34 0x34 TXOICR 0x38 0x38 RXOICR 0x3c 0x3c RXUICR 0x40 0x40 MSTICR 0x44 0x44 ICR 0x48 0x48 DMACR 0x4c 0x4c DMATDLR 0x50 0x50 DMARDLR 0x54 0x54 IDR 0x58 0x58 SSI_VERSION_ID 0x5c 0x5c DRx (0 to 35) 0x60+i*0x4 0x60+i*0x4 RX_SAMPLE_DLY 0xf0 0xf0 SPI_CTRLR0 0xf4 0xf4 TXD_DRIVE_EDGE 0xf8 0xf8 XIP_MODE_BITS 0xfc RSVD Register configuration - CTRLR0 DW_ssi DW_apb_ssi SPI_HYPERBUS_EN bit[24] NONE SPI_FRF bit[23:22] bit[22:21] DFS_32 NONE bit[20:16] CFS bit[19:16] bit[15:12] SSTE bit[14] bit[24] SRL bit[13] bit[11] SLV_OE bit[12] bit[10] TMOD bit[11:10] bit[9:8] SCPOL | SPHA bit[9:8] bit[7:6] FRF bit[7:6] bit[5:4] DFS bit[4:0] bit[3:0] The documents used are [1] DW_apb_ssi_databook.pdf version 4.01a (2016.10a). [2] DWC_ssi_databook.pdf version 1.01a. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200505130618.554-4-wan.ahmad.zainie.wan.mohamad@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-05 21:06:14 +08:00
dw_spi_dma_setup_generic(&dwsmmio->dws);
spi: dw: Add support for DesignWare DWC_ssi This patch adds initial support for DesignWare DWC_ssi soft IP. DWC_ssi is the enhanced version of DW_apb_ssi, which is currently supported by this driver. Their registers are same, but the bit fields of register CTRLR0 are different. DWC_ssi has additional features compared to DW_apb_ssi. Major enhancements in DWC_ssi are hyper bus protocol, boot mode support and advanced XIP support. DWC_ssi is an AHB slave device, whilst DW_apb_ssi is an APB slave device. Register offset DW_ssi DW_apb_ssi CTRLR0 0x00 0x00 CTRLR1 0x04 0x04 SSIENR 0x08 0x08 MWCR 0x0c 0x0c SER 0x10 0x10 BAUDR 0x14 0x14 TXFTLR 0x18 0x18 RXFTLR 0x1c 0x1c TXFLR 0x20 0x20 RXFLR 0x24 0x24 SR 0x28 0x28 IMR 0x2c 0x2c ISR 0x30 0x30 RISR 0x34 0x34 TXOICR 0x38 0x38 RXOICR 0x3c 0x3c RXUICR 0x40 0x40 MSTICR 0x44 0x44 ICR 0x48 0x48 DMACR 0x4c 0x4c DMATDLR 0x50 0x50 DMARDLR 0x54 0x54 IDR 0x58 0x58 SSI_VERSION_ID 0x5c 0x5c DRx (0 to 35) 0x60+i*0x4 0x60+i*0x4 RX_SAMPLE_DLY 0xf0 0xf0 SPI_CTRLR0 0xf4 0xf4 TXD_DRIVE_EDGE 0xf8 0xf8 XIP_MODE_BITS 0xfc RSVD Register configuration - CTRLR0 DW_ssi DW_apb_ssi SPI_HYPERBUS_EN bit[24] NONE SPI_FRF bit[23:22] bit[22:21] DFS_32 NONE bit[20:16] CFS bit[19:16] bit[15:12] SSTE bit[14] bit[24] SRL bit[13] bit[11] SLV_OE bit[12] bit[10] TMOD bit[11:10] bit[9:8] SCPOL | SPHA bit[9:8] bit[7:6] FRF bit[7:6] bit[5:4] DFS bit[4:0] bit[3:0] The documents used are [1] DW_apb_ssi_databook.pdf version 4.01a (2016.10a). [2] DWC_ssi_databook.pdf version 1.01a. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200505130618.554-4-wan.ahmad.zainie.wan.mohamad@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-05 21:06:14 +08:00
return 0;
}
static int dw_spi_keembay_init(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio)
{
2020-10-08 07:54:51 +08:00
dwsmmio->dws.caps = DW_SPI_CAP_KEEMBAY_MST | DW_SPI_CAP_DWC_SSI;
return 0;
}
static int dw_spi_canaan_k210_init(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio)
{
/*
* The Canaan Kendryte K210 SoC DW apb_ssi v4 spi controller is
* documented to have a 32 word deep TX and RX FIFO, which
* spi_hw_init() detects. However, when the RX FIFO is filled up to
* 32 entries (RXFLR = 32), an RX FIFO overrun error occurs. Avoid this
* problem by force setting fifo_len to 31.
*/
dwsmmio->dws.fifo_len = 31;
return 0;
}
static int dw_spi_mmio_probe(struct platform_device *pdev)
{
int (*init_func)(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio);
struct dw_spi_mmio *dwsmmio;
struct resource *mem;
struct dw_spi *dws;
int ret;
int num_cs;
dwsmmio = devm_kzalloc(&pdev->dev, sizeof(struct dw_spi_mmio),
GFP_KERNEL);
if (!dwsmmio)
return -ENOMEM;
dws = &dwsmmio->dws;
/* Get basic io resource and map it */
dws->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);
if (IS_ERR(dws->regs))
return PTR_ERR(dws->regs);
dws->paddr = mem->start;
dws->irq = platform_get_irq(pdev, 0);
if (dws->irq < 0)
return dws->irq; /* -ENXIO */
dwsmmio->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(dwsmmio->clk))
return PTR_ERR(dwsmmio->clk);
ret = clk_prepare_enable(dwsmmio->clk);
if (ret)
return ret;
/* Optional clock needed to access the registers */
dwsmmio->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
if (IS_ERR(dwsmmio->pclk)) {
ret = PTR_ERR(dwsmmio->pclk);
goto out_clk;
}
ret = clk_prepare_enable(dwsmmio->pclk);
if (ret)
goto out_clk;
/* find an optional reset controller */
dwsmmio->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, "spi");
if (IS_ERR(dwsmmio->rstc)) {
ret = PTR_ERR(dwsmmio->rstc);
goto out_clk;
}
reset_control_deassert(dwsmmio->rstc);
dws->bus_num = pdev->id;
dws->max_freq = clk_get_rate(dwsmmio->clk);
device_property_read_u32(&pdev->dev, "reg-io-width", &dws->reg_io_width);
num_cs = 4;
device_property_read_u32(&pdev->dev, "num-cs", &num_cs);
dws->num_cs = num_cs;
init_func = device_get_match_data(&pdev->dev);
if (init_func) {
ret = init_func(pdev, dwsmmio);
if (ret)
goto out;
}
pm_runtime_enable(&pdev->dev);
ret = dw_spi_add_host(&pdev->dev, dws);
if (ret)
goto out;
platform_set_drvdata(pdev, dwsmmio);
return 0;
out:
pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(dwsmmio->pclk);
out_clk:
clk_disable_unprepare(dwsmmio->clk);
reset_control_assert(dwsmmio->rstc);
return ret;
}
static int dw_spi_mmio_remove(struct platform_device *pdev)
{
struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev);
dw_spi_remove_host(&dwsmmio->dws);
pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(dwsmmio->pclk);
clk_disable_unprepare(dwsmmio->clk);
reset_control_assert(dwsmmio->rstc);
return 0;
}
static const struct of_device_id dw_spi_mmio_of_match[] = {
{ .compatible = "snps,dw-apb-ssi", .data = dw_spi_dw_apb_init},
{ .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_ocelot_init},
{ .compatible = "mscc,jaguar2-spi", .data = dw_spi_mscc_jaguar2_init},
{ .compatible = "amazon,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
{ .compatible = "renesas,rzn1-spi", .data = dw_spi_dw_apb_init},
spi: dw: Add support for DesignWare DWC_ssi This patch adds initial support for DesignWare DWC_ssi soft IP. DWC_ssi is the enhanced version of DW_apb_ssi, which is currently supported by this driver. Their registers are same, but the bit fields of register CTRLR0 are different. DWC_ssi has additional features compared to DW_apb_ssi. Major enhancements in DWC_ssi are hyper bus protocol, boot mode support and advanced XIP support. DWC_ssi is an AHB slave device, whilst DW_apb_ssi is an APB slave device. Register offset DW_ssi DW_apb_ssi CTRLR0 0x00 0x00 CTRLR1 0x04 0x04 SSIENR 0x08 0x08 MWCR 0x0c 0x0c SER 0x10 0x10 BAUDR 0x14 0x14 TXFTLR 0x18 0x18 RXFTLR 0x1c 0x1c TXFLR 0x20 0x20 RXFLR 0x24 0x24 SR 0x28 0x28 IMR 0x2c 0x2c ISR 0x30 0x30 RISR 0x34 0x34 TXOICR 0x38 0x38 RXOICR 0x3c 0x3c RXUICR 0x40 0x40 MSTICR 0x44 0x44 ICR 0x48 0x48 DMACR 0x4c 0x4c DMATDLR 0x50 0x50 DMARDLR 0x54 0x54 IDR 0x58 0x58 SSI_VERSION_ID 0x5c 0x5c DRx (0 to 35) 0x60+i*0x4 0x60+i*0x4 RX_SAMPLE_DLY 0xf0 0xf0 SPI_CTRLR0 0xf4 0xf4 TXD_DRIVE_EDGE 0xf8 0xf8 XIP_MODE_BITS 0xfc RSVD Register configuration - CTRLR0 DW_ssi DW_apb_ssi SPI_HYPERBUS_EN bit[24] NONE SPI_FRF bit[23:22] bit[22:21] DFS_32 NONE bit[20:16] CFS bit[19:16] bit[15:12] SSTE bit[14] bit[24] SRL bit[13] bit[11] SLV_OE bit[12] bit[10] TMOD bit[11:10] bit[9:8] SCPOL | SPHA bit[9:8] bit[7:6] FRF bit[7:6] bit[5:4] DFS bit[4:0] bit[3:0] The documents used are [1] DW_apb_ssi_databook.pdf version 4.01a (2016.10a). [2] DWC_ssi_databook.pdf version 1.01a. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200505130618.554-4-wan.ahmad.zainie.wan.mohamad@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-05 21:06:14 +08:00
{ .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_dwc_ssi_init},
{ .compatible = "intel,keembay-ssi", .data = dw_spi_keembay_init},
{ .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init},
{ .compatible = "canaan,k210-spi", dw_spi_canaan_k210_init},
{ /* end of table */}
};
MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
#ifdef CONFIG_ACPI
static const struct acpi_device_id dw_spi_mmio_acpi_match[] = {
{"HISI0173", (kernel_ulong_t)dw_spi_dw_apb_init},
{},
};
MODULE_DEVICE_TABLE(acpi, dw_spi_mmio_acpi_match);
#endif
static struct platform_driver dw_spi_mmio_driver = {
.probe = dw_spi_mmio_probe,
.remove = dw_spi_mmio_remove,
.driver = {
.name = DRIVER_NAME,
.of_match_table = dw_spi_mmio_of_match,
.acpi_match_table = ACPI_PTR(dw_spi_mmio_acpi_match),
},
};
module_platform_driver(dw_spi_mmio_driver);
MODULE_AUTHOR("Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com>");
MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core");
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS(SPI_DW_CORE);