OpenCloudOS-Kernel/tools/perf/util/env.h

175 lines
3.9 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __PERF_ENV_H
#define __PERF_ENV_H
#include <linux/types.h>
perf bpf: Save bpf_prog_info in a rbtree in perf_env bpf_prog_info contains information necessary to annotate bpf programs. This patch saves bpf_prog_info for bpf programs loaded in the system. Some big picture of the next few patches: To fully annotate BPF programs with source code mapping, 4 different informations are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf Before this set, 1) and 2) in the list are already saved to perf.data file. For BPF programs that are already loaded before perf run, 1) and 2) are synthesized by perf_event__synthesize_bpf_events(). For short living BPF programs, 1) and 2) are generated by kernel. This set handles 3) and 4) from the list. Again, it is necessary to handle existing BPF program and short living program separately. This patch handles 3) for exising BPF programs while synthesizing 1) and 2) in perf_event__synthesize_bpf_events(). These data are stored in perf_env. The next patch saves these data from perf_env to perf.data as headers. Similarly, the two patches after the next saves 4) of existing BPF programs to perf_env and perf.data. Another patch later will handle 3) and 4) for short living BPF programs by monitoring 1) and 2) in a dedicate thread. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com [ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 13:30:42 +08:00
#include <linux/rbtree.h>
#include "rwsem.h"
struct perf_cpu_map;
struct cpu_topology_map {
int socket_id;
int die_id;
int core_id;
};
struct cpu_cache_level {
u32 level;
u32 line_size;
u32 sets;
u32 ways;
char *type;
char *size;
char *map;
};
struct numa_node {
u32 node;
u64 mem_total;
u64 mem_free;
struct perf_cpu_map *map;
};
struct memory_node {
u64 node;
u64 size;
unsigned long *set;
};
struct hybrid_node {
char *pmu_name;
char *cpus;
};
perf header: Support HYBRID_CPU_PMU_CAPS feature Perf has supported the CPU_PMU_CAPS feature to display a list of CPU PMU capabilities. But on a hybrid platform, it may have several CPU PMUs (such as "cpu_core" and "cpu_atom"). The CPU_PMU_CAPS feature is hard to extend to support multiple CPU PMUs well if it needs to be compatible for the case of old perf data file + new perf tool. So for better compatibility we now create a new feature HYBRID_CPU_PMU_CAPS in the header. For the perf.data generated on hybrid platform, root@otcpl-adl-s-2:~# perf report --header-only -I # cpu_core pmu capabilities: branches=32, max_precise=3, pmu_name=alderlake_hybrid # cpu_atom pmu capabilities: branches=32, max_precise=3, pmu_name=alderlake_hybrid # missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT COMPRESSED CPU_PMU_CAPS CLOCK_DATA For the perf.data generated on non-hybrid platform root@kbl-ppc:~# perf report --header-only -I # cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake # missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT COMPRESSED CLOCK_DATA HYBRID_TOPOLOGY HYBRID_CPU_PMU_CAPS Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210514122948.9472-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-14 20:29:48 +08:00
struct hybrid_cpc_node {
int nr_cpu_pmu_caps;
unsigned int max_branches;
char *cpu_pmu_caps;
char *pmu_name;
};
struct perf_env {
char *hostname;
char *os_release;
char *version;
char *arch;
int nr_cpus_online;
int nr_cpus_avail;
char *cpu_desc;
char *cpuid;
unsigned long long total_mem;
unsigned int msr_pmu_type;
perf header: Support CPU PMU capabilities To stitch LBR call stack, the max LBR information is required. So the CPU PMU capabilities information has to be stored in perf header. Add a new feature HEADER_CPU_PMU_CAPS for CPU PMU capabilities. Retrieve all CPU PMU capabilities, not just max LBR information. Add variable max_branches to facilitate future usage. Committer testing: # ls -la /sys/devices/cpu/caps/ total 0 drwxr-xr-x. 2 root root 0 Apr 17 10:53 . drwxr-xr-x. 6 root root 0 Apr 17 07:02 .. -r--r--r--. 1 root root 4096 Apr 17 10:53 max_precise # # cat /sys/devices/cpu/caps/max_precise 0 # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.033 MB perf.data (7 samples) ] # # perf report --header-only | egrep 'cpu(desc|.*capabilities)' # cpudesc : AMD Ryzen 5 3600X 6-Core Processor # cpu pmu capabilities: max_precise=0 # And then on an Intel machine: $ ls -la /sys/devices/cpu/caps/ total 0 drwxr-xr-x. 2 root root 0 Apr 17 10:51 . drwxr-xr-x. 6 root root 0 Apr 17 10:04 .. -r--r--r--. 1 root root 4096 Apr 17 11:37 branches -r--r--r--. 1 root root 4096 Apr 17 10:51 max_precise -r--r--r--. 1 root root 4096 Apr 17 11:37 pmu_name $ cat /sys/devices/cpu/caps/max_precise 3 $ cat /sys/devices/cpu/caps/branches 32 $ cat /sys/devices/cpu/caps/pmu_name skylake $ perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf report --header-only | egrep 'cpu(desc|.*capabilities)' # cpudesc : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz # cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake $ Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200319202517.23423-3-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-20 04:25:02 +08:00
unsigned int max_branches;
int kernel_is_64_bit;
int nr_cmdline;
int nr_sibling_cores;
int nr_sibling_dies;
int nr_sibling_threads;
int nr_numa_nodes;
int nr_memory_nodes;
int nr_pmu_mappings;
int nr_groups;
perf header: Support CPU PMU capabilities To stitch LBR call stack, the max LBR information is required. So the CPU PMU capabilities information has to be stored in perf header. Add a new feature HEADER_CPU_PMU_CAPS for CPU PMU capabilities. Retrieve all CPU PMU capabilities, not just max LBR information. Add variable max_branches to facilitate future usage. Committer testing: # ls -la /sys/devices/cpu/caps/ total 0 drwxr-xr-x. 2 root root 0 Apr 17 10:53 . drwxr-xr-x. 6 root root 0 Apr 17 07:02 .. -r--r--r--. 1 root root 4096 Apr 17 10:53 max_precise # # cat /sys/devices/cpu/caps/max_precise 0 # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.033 MB perf.data (7 samples) ] # # perf report --header-only | egrep 'cpu(desc|.*capabilities)' # cpudesc : AMD Ryzen 5 3600X 6-Core Processor # cpu pmu capabilities: max_precise=0 # And then on an Intel machine: $ ls -la /sys/devices/cpu/caps/ total 0 drwxr-xr-x. 2 root root 0 Apr 17 10:51 . drwxr-xr-x. 6 root root 0 Apr 17 10:04 .. -r--r--r--. 1 root root 4096 Apr 17 11:37 branches -r--r--r--. 1 root root 4096 Apr 17 10:51 max_precise -r--r--r--. 1 root root 4096 Apr 17 11:37 pmu_name $ cat /sys/devices/cpu/caps/max_precise 3 $ cat /sys/devices/cpu/caps/branches 32 $ cat /sys/devices/cpu/caps/pmu_name skylake $ perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf report --header-only | egrep 'cpu(desc|.*capabilities)' # cpudesc : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz # cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake $ Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200319202517.23423-3-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-20 04:25:02 +08:00
int nr_cpu_pmu_caps;
int nr_hybrid_nodes;
perf header: Support HYBRID_CPU_PMU_CAPS feature Perf has supported the CPU_PMU_CAPS feature to display a list of CPU PMU capabilities. But on a hybrid platform, it may have several CPU PMUs (such as "cpu_core" and "cpu_atom"). The CPU_PMU_CAPS feature is hard to extend to support multiple CPU PMUs well if it needs to be compatible for the case of old perf data file + new perf tool. So for better compatibility we now create a new feature HYBRID_CPU_PMU_CAPS in the header. For the perf.data generated on hybrid platform, root@otcpl-adl-s-2:~# perf report --header-only -I # cpu_core pmu capabilities: branches=32, max_precise=3, pmu_name=alderlake_hybrid # cpu_atom pmu capabilities: branches=32, max_precise=3, pmu_name=alderlake_hybrid # missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT COMPRESSED CPU_PMU_CAPS CLOCK_DATA For the perf.data generated on non-hybrid platform root@kbl-ppc:~# perf report --header-only -I # cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake # missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT COMPRESSED CLOCK_DATA HYBRID_TOPOLOGY HYBRID_CPU_PMU_CAPS Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210514122948.9472-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-14 20:29:48 +08:00
int nr_hybrid_cpc_nodes;
char *cmdline;
const char **cmdline_argv;
char *sibling_cores;
char *sibling_dies;
char *sibling_threads;
char *pmu_mappings;
perf header: Support CPU PMU capabilities To stitch LBR call stack, the max LBR information is required. So the CPU PMU capabilities information has to be stored in perf header. Add a new feature HEADER_CPU_PMU_CAPS for CPU PMU capabilities. Retrieve all CPU PMU capabilities, not just max LBR information. Add variable max_branches to facilitate future usage. Committer testing: # ls -la /sys/devices/cpu/caps/ total 0 drwxr-xr-x. 2 root root 0 Apr 17 10:53 . drwxr-xr-x. 6 root root 0 Apr 17 07:02 .. -r--r--r--. 1 root root 4096 Apr 17 10:53 max_precise # # cat /sys/devices/cpu/caps/max_precise 0 # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.033 MB perf.data (7 samples) ] # # perf report --header-only | egrep 'cpu(desc|.*capabilities)' # cpudesc : AMD Ryzen 5 3600X 6-Core Processor # cpu pmu capabilities: max_precise=0 # And then on an Intel machine: $ ls -la /sys/devices/cpu/caps/ total 0 drwxr-xr-x. 2 root root 0 Apr 17 10:51 . drwxr-xr-x. 6 root root 0 Apr 17 10:04 .. -r--r--r--. 1 root root 4096 Apr 17 11:37 branches -r--r--r--. 1 root root 4096 Apr 17 10:51 max_precise -r--r--r--. 1 root root 4096 Apr 17 11:37 pmu_name $ cat /sys/devices/cpu/caps/max_precise 3 $ cat /sys/devices/cpu/caps/branches 32 $ cat /sys/devices/cpu/caps/pmu_name skylake $ perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf report --header-only | egrep 'cpu(desc|.*capabilities)' # cpudesc : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz # cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake $ Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200319202517.23423-3-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-20 04:25:02 +08:00
char *cpu_pmu_caps;
struct cpu_topology_map *cpu;
struct cpu_cache_level *caches;
int caches_cnt;
u32 comp_ratio;
u32 comp_ver;
u32 comp_type;
u32 comp_level;
u32 comp_mmap_len;
struct numa_node *numa_nodes;
struct memory_node *memory_nodes;
unsigned long long memory_bsize;
struct hybrid_node *hybrid_nodes;
perf header: Support HYBRID_CPU_PMU_CAPS feature Perf has supported the CPU_PMU_CAPS feature to display a list of CPU PMU capabilities. But on a hybrid platform, it may have several CPU PMUs (such as "cpu_core" and "cpu_atom"). The CPU_PMU_CAPS feature is hard to extend to support multiple CPU PMUs well if it needs to be compatible for the case of old perf data file + new perf tool. So for better compatibility we now create a new feature HYBRID_CPU_PMU_CAPS in the header. For the perf.data generated on hybrid platform, root@otcpl-adl-s-2:~# perf report --header-only -I # cpu_core pmu capabilities: branches=32, max_precise=3, pmu_name=alderlake_hybrid # cpu_atom pmu capabilities: branches=32, max_precise=3, pmu_name=alderlake_hybrid # missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT COMPRESSED CPU_PMU_CAPS CLOCK_DATA For the perf.data generated on non-hybrid platform root@kbl-ppc:~# perf report --header-only -I # cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake # missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT COMPRESSED CLOCK_DATA HYBRID_TOPOLOGY HYBRID_CPU_PMU_CAPS Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210514122948.9472-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-14 20:29:48 +08:00
struct hybrid_cpc_node *hybrid_cpc_nodes;
#ifdef HAVE_LIBBPF_SUPPORT
perf bpf: Save bpf_prog_info in a rbtree in perf_env bpf_prog_info contains information necessary to annotate bpf programs. This patch saves bpf_prog_info for bpf programs loaded in the system. Some big picture of the next few patches: To fully annotate BPF programs with source code mapping, 4 different informations are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf Before this set, 1) and 2) in the list are already saved to perf.data file. For BPF programs that are already loaded before perf run, 1) and 2) are synthesized by perf_event__synthesize_bpf_events(). For short living BPF programs, 1) and 2) are generated by kernel. This set handles 3) and 4) from the list. Again, it is necessary to handle existing BPF program and short living program separately. This patch handles 3) for exising BPF programs while synthesizing 1) and 2) in perf_event__synthesize_bpf_events(). These data are stored in perf_env. The next patch saves these data from perf_env to perf.data as headers. Similarly, the two patches after the next saves 4) of existing BPF programs to perf_env and perf.data. Another patch later will handle 3) and 4) for short living BPF programs by monitoring 1) and 2) in a dedicate thread. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com [ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 13:30:42 +08:00
/*
* bpf_info_lock protects bpf rbtrees. This is needed because the
* trees are accessed by different threads in perf-top
*/
struct {
struct rw_semaphore lock;
struct rb_root infos;
u32 infos_cnt;
struct rb_root btfs;
u32 btfs_cnt;
perf bpf: Save bpf_prog_info in a rbtree in perf_env bpf_prog_info contains information necessary to annotate bpf programs. This patch saves bpf_prog_info for bpf programs loaded in the system. Some big picture of the next few patches: To fully annotate BPF programs with source code mapping, 4 different informations are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf Before this set, 1) and 2) in the list are already saved to perf.data file. For BPF programs that are already loaded before perf run, 1) and 2) are synthesized by perf_event__synthesize_bpf_events(). For short living BPF programs, 1) and 2) are generated by kernel. This set handles 3) and 4) from the list. Again, it is necessary to handle existing BPF program and short living program separately. This patch handles 3) for exising BPF programs while synthesizing 1) and 2) in perf_event__synthesize_bpf_events(). These data are stored in perf_env. The next patch saves these data from perf_env to perf.data as headers. Similarly, the two patches after the next saves 4) of existing BPF programs to perf_env and perf.data. Another patch later will handle 3) and 4) for short living BPF programs by monitoring 1) and 2) in a dedicate thread. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com [ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 13:30:42 +08:00
} bpf_progs;
#endif // HAVE_LIBBPF_SUPPORT
/* same reason as above (for perf-top) */
struct {
struct rw_semaphore lock;
struct rb_root tree;
} cgroups;
/* For fast cpu to numa node lookup via perf_env__numa_node */
int *numa_map;
int nr_numa_map;
perf header: Store clock references for -k/--clockid option Add a new CLOCK_DATA feature that stores reference times when -k/--clockid option is specified. It contains the clock id and its reference time together with wall clock time taken at the 'same time', both values are in nanoseconds. The format of data is as below: struct { u32 version; /* version = 1 */ u32 clockid; u64 wall_clock_ns; u64 clockid_time_ns; }; This clock reference times will be used in following changes to display wall clock for perf events. It's available only for recording with clockid specified, because it's the only case where we can get reference time to wallclock time. It's can't do that with perf clock yet. Committer testing: $ perf record -h -k Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -k, --clockid <clockid> clockid to use for events, see clock_gettime() $ perf record -k monotonic sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (8 samples) ] $ perf report --header-only | grep clockid -A1 # event : name = cycles:u, , id = { 88815, 88816, 88817, 88818, 88819, 88820, 88821, 88822 }, size = 120, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, read_format = ID, disabled = 1, inherit = 1, exclude_kernel = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, use_clockid = 1, ksymbol = 1, bpf_event = 1, clockid = 1 # CPU_TOPOLOGY info available, use -I to display -- # clockid frequency: 1000 MHz # cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake # clockid: monotonic (1) # reference time: 2020-08-06 09:40:21.619290 = 1596717621.619290 (TOD) = 21931.077673635 (monotonic) $ Original-patch-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Geneviève Bastien <gbastien@versatic.net> Cc: Ian Rogers <irogers@google.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/20200805093444.314999-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-05 17:34:40 +08:00
/* For real clock time reference. */
struct {
u64 tod_ns;
u64 clockid_ns;
u64 clockid_res_ns;
perf header: Store clock references for -k/--clockid option Add a new CLOCK_DATA feature that stores reference times when -k/--clockid option is specified. It contains the clock id and its reference time together with wall clock time taken at the 'same time', both values are in nanoseconds. The format of data is as below: struct { u32 version; /* version = 1 */ u32 clockid; u64 wall_clock_ns; u64 clockid_time_ns; }; This clock reference times will be used in following changes to display wall clock for perf events. It's available only for recording with clockid specified, because it's the only case where we can get reference time to wallclock time. It's can't do that with perf clock yet. Committer testing: $ perf record -h -k Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -k, --clockid <clockid> clockid to use for events, see clock_gettime() $ perf record -k monotonic sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (8 samples) ] $ perf report --header-only | grep clockid -A1 # event : name = cycles:u, , id = { 88815, 88816, 88817, 88818, 88819, 88820, 88821, 88822 }, size = 120, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, read_format = ID, disabled = 1, inherit = 1, exclude_kernel = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, use_clockid = 1, ksymbol = 1, bpf_event = 1, clockid = 1 # CPU_TOPOLOGY info available, use -I to display -- # clockid frequency: 1000 MHz # cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake # clockid: monotonic (1) # reference time: 2020-08-06 09:40:21.619290 = 1596717621.619290 (TOD) = 21931.077673635 (monotonic) $ Original-patch-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Geneviève Bastien <gbastien@versatic.net> Cc: Ian Rogers <irogers@google.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/20200805093444.314999-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-05 17:34:40 +08:00
int clockid;
/*
* enabled is valid for report mode, and is true if above
* values are set, it's set in process_clock_data
*/
bool enabled;
} clock;
};
enum perf_compress_type {
PERF_COMP_NONE = 0,
PERF_COMP_ZSTD,
PERF_COMP_MAX
};
perf bpf: Save bpf_prog_info in a rbtree in perf_env bpf_prog_info contains information necessary to annotate bpf programs. This patch saves bpf_prog_info for bpf programs loaded in the system. Some big picture of the next few patches: To fully annotate BPF programs with source code mapping, 4 different informations are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf Before this set, 1) and 2) in the list are already saved to perf.data file. For BPF programs that are already loaded before perf run, 1) and 2) are synthesized by perf_event__synthesize_bpf_events(). For short living BPF programs, 1) and 2) are generated by kernel. This set handles 3) and 4) from the list. Again, it is necessary to handle existing BPF program and short living program separately. This patch handles 3) for exising BPF programs while synthesizing 1) and 2) in perf_event__synthesize_bpf_events(). These data are stored in perf_env. The next patch saves these data from perf_env to perf.data as headers. Similarly, the two patches after the next saves 4) of existing BPF programs to perf_env and perf.data. Another patch later will handle 3) and 4) for short living BPF programs by monitoring 1) and 2) in a dedicate thread. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com [ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 13:30:42 +08:00
struct bpf_prog_info_node;
struct btf_node;
perf bpf: Save bpf_prog_info in a rbtree in perf_env bpf_prog_info contains information necessary to annotate bpf programs. This patch saves bpf_prog_info for bpf programs loaded in the system. Some big picture of the next few patches: To fully annotate BPF programs with source code mapping, 4 different informations are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf Before this set, 1) and 2) in the list are already saved to perf.data file. For BPF programs that are already loaded before perf run, 1) and 2) are synthesized by perf_event__synthesize_bpf_events(). For short living BPF programs, 1) and 2) are generated by kernel. This set handles 3) and 4) from the list. Again, it is necessary to handle existing BPF program and short living program separately. This patch handles 3) for exising BPF programs while synthesizing 1) and 2) in perf_event__synthesize_bpf_events(). These data are stored in perf_env. The next patch saves these data from perf_env to perf.data as headers. Similarly, the two patches after the next saves 4) of existing BPF programs to perf_env and perf.data. Another patch later will handle 3) and 4) for short living BPF programs by monitoring 1) and 2) in a dedicate thread. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com [ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 13:30:42 +08:00
extern struct perf_env perf_env;
void perf_env__exit(struct perf_env *env);
int perf_env__kernel_is_64_bit(struct perf_env *env);
int perf_env__set_cmdline(struct perf_env *env, int argc, const char *argv[]);
int perf_env__read_cpuid(struct perf_env *env);
int perf_env__read_pmu_mappings(struct perf_env *env);
int perf_env__nr_pmu_mappings(struct perf_env *env);
const char *perf_env__pmu_mappings(struct perf_env *env);
int perf_env__read_cpu_topology_map(struct perf_env *env);
void cpu_cache_level__free(struct cpu_cache_level *cache);
const char *perf_env__arch(struct perf_env *env);
const char *perf_env__cpuid(struct perf_env *env);
const char *perf_env__raw_arch(struct perf_env *env);
int perf_env__nr_cpus_avail(struct perf_env *env);
perf bpf: Save bpf_prog_info in a rbtree in perf_env bpf_prog_info contains information necessary to annotate bpf programs. This patch saves bpf_prog_info for bpf programs loaded in the system. Some big picture of the next few patches: To fully annotate BPF programs with source code mapping, 4 different informations are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf Before this set, 1) and 2) in the list are already saved to perf.data file. For BPF programs that are already loaded before perf run, 1) and 2) are synthesized by perf_event__synthesize_bpf_events(). For short living BPF programs, 1) and 2) are generated by kernel. This set handles 3) and 4) from the list. Again, it is necessary to handle existing BPF program and short living program separately. This patch handles 3) for exising BPF programs while synthesizing 1) and 2) in perf_event__synthesize_bpf_events(). These data are stored in perf_env. The next patch saves these data from perf_env to perf.data as headers. Similarly, the two patches after the next saves 4) of existing BPF programs to perf_env and perf.data. Another patch later will handle 3) and 4) for short living BPF programs by monitoring 1) and 2) in a dedicate thread. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com [ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 13:30:42 +08:00
void perf_env__init(struct perf_env *env);
void perf_env__insert_bpf_prog_info(struct perf_env *env,
struct bpf_prog_info_node *info_node);
struct bpf_prog_info_node *perf_env__find_bpf_prog_info(struct perf_env *env,
__u32 prog_id);
void perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node);
struct btf_node *perf_env__find_btf(struct perf_env *env, __u32 btf_id);
int perf_env__numa_node(struct perf_env *env, int cpu);
#endif /* __PERF_ENV_H */