OpenCloudOS-Kernel/drivers/gpu/drm/drm_edid.c

4210 lines
124 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006 Luc Verhaegen (quirks list)
* Copyright (c) 2007-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
* Copyright 2010 Red Hat, Inc.
*
* DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from
* FB layer.
* Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sub license,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/hdmi.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <drm/drmP.h>
#include <drm/drm_edid.h>
#include <drm/drm_displayid.h>
#define version_greater(edid, maj, min) \
(((edid)->version > (maj)) || \
((edid)->version == (maj) && (edid)->revision > (min)))
#define EDID_EST_TIMINGS 16
#define EDID_STD_TIMINGS 8
#define EDID_DETAILED_TIMINGS 4
/*
* EDID blocks out in the wild have a variety of bugs, try to collect
* them here (note that userspace may work around broken monitors first,
* but fixes should make their way here so that the kernel "just works"
* on as many displays as possible).
*/
/* First detailed mode wrong, use largest 60Hz mode */
#define EDID_QUIRK_PREFER_LARGE_60 (1 << 0)
/* Reported 135MHz pixel clock is too high, needs adjustment */
#define EDID_QUIRK_135_CLOCK_TOO_HIGH (1 << 1)
/* Prefer the largest mode at 75 Hz */
#define EDID_QUIRK_PREFER_LARGE_75 (1 << 2)
/* Detail timing is in cm not mm */
#define EDID_QUIRK_DETAILED_IN_CM (1 << 3)
/* Detailed timing descriptors have bogus size values, so just take the
* maximum size and use that.
*/
#define EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE (1 << 4)
/* Monitor forgot to set the first detailed is preferred bit. */
#define EDID_QUIRK_FIRST_DETAILED_PREFERRED (1 << 5)
/* use +hsync +vsync for detailed mode */
#define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6)
/* Force reduced-blanking timings for detailed modes */
#define EDID_QUIRK_FORCE_REDUCED_BLANKING (1 << 7)
/* Force 8bpc */
#define EDID_QUIRK_FORCE_8BPC (1 << 8)
/* Force 12bpc */
#define EDID_QUIRK_FORCE_12BPC (1 << 9)
struct detailed_mode_closure {
struct drm_connector *connector;
struct edid *edid;
bool preferred;
u32 quirks;
int modes;
};
#define LEVEL_DMT 0
#define LEVEL_GTF 1
#define LEVEL_GTF2 2
#define LEVEL_CVT 3
static struct edid_quirk {
char vendor[4];
int product_id;
u32 quirks;
} edid_quirk_list[] = {
/* Acer AL1706 */
{ "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 },
/* Acer F51 */
{ "API", 0x7602, EDID_QUIRK_PREFER_LARGE_60 },
/* Unknown Acer */
{ "ACR", 2423, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
/* Belinea 10 15 55 */
{ "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60 },
{ "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60 },
/* Envision Peripherals, Inc. EN-7100e */
{ "EPI", 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH },
/* Envision EN2028 */
{ "EPI", 8232, EDID_QUIRK_PREFER_LARGE_60 },
/* Funai Electronics PM36B */
{ "FCM", 13600, EDID_QUIRK_PREFER_LARGE_75 |
EDID_QUIRK_DETAILED_IN_CM },
/* LG Philips LCD LP154W01-A5 */
{ "LPL", 0, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
{ "LPL", 0x2a00, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
/* Philips 107p5 CRT */
{ "PHL", 57364, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
/* Proview AY765C */
{ "PTS", 765, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
/* Samsung SyncMaster 205BW. Note: irony */
{ "SAM", 541, EDID_QUIRK_DETAILED_SYNC_PP },
/* Samsung SyncMaster 22[5-6]BW */
{ "SAM", 596, EDID_QUIRK_PREFER_LARGE_60 },
{ "SAM", 638, EDID_QUIRK_PREFER_LARGE_60 },
/* Sony PVM-2541A does up to 12 bpc, but only reports max 8 bpc */
{ "SNY", 0x2541, EDID_QUIRK_FORCE_12BPC },
/* ViewSonic VA2026w */
{ "VSC", 5020, EDID_QUIRK_FORCE_REDUCED_BLANKING },
drm/edid: add quirk for Medion MD30217PG This LCD monitor (1280x1024 native) has a completely bogus detailed timing (640x350@70hz). User reports that 1280x1024@60 has waves so prefer 1280x1024@75. Manufacturer: MED Model: 7b8 Serial#: 99188 Year: 2005 Week: 5 EDID Version: 1.3 Analog Display Input, Input Voltage Level: 0.700/0.700 V Sync: Separate Max Image Size [cm]: horiz.: 34 vert.: 27 Gamma: 2.50 DPMS capabilities: Off; RGB/Color Display First detailed timing is preferred mode redX: 0.645 redY: 0.348 greenX: 0.280 greenY: 0.605 blueX: 0.142 blueY: 0.071 whiteX: 0.313 whiteY: 0.329 Supported established timings: 720x400@70Hz 640x480@60Hz 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1280x1024@75Hz Manufacturer's mask: 0 Supported standard timings: Supported detailed timing: clock: 25.2 MHz Image Size: 337 x 270 mm h_active: 640 h_sync: 688 h_sync_end 784 h_blank_end 800 h_border: 0 v_active: 350 v_sync: 350 v_sync_end 352 v_blanking: 449 v_border: 0 Monitor name: MD30217PG Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz Serial No: 501099188 EDID (in hex): 00ffffffffffff0034a4b80774830100 050f010368221b962a0c55a559479b24 125054afcf00310a0101010101018180 000000000000d60980a0205e63103060 0200510e1100001e000000fc004d4433 3032313750470a202020000000fd0038 4c1e530e000a202020202020000000ff 003530313039393138380a2020200078 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: friedrich@mailstation.de Cc: stable@vger.kernel.org
2013-08-12 23:04:29 +08:00
/* Medion MD 30217 PG */
{ "MED", 0x7b8, EDID_QUIRK_PREFER_LARGE_75 },
/* Panel in Samsung NP700G7A-S01PL notebook reports 6bpc */
{ "SEC", 0xd033, EDID_QUIRK_FORCE_8BPC },
};
/*
* Autogenerated from the DMT spec.
* This table is copied from xfree86/modes/xf86EdidModes.c.
*/
static const struct drm_display_mode drm_dmt_modes[] = {
/* 0x01 - 640x350@85Hz */
{ DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 31500, 640, 672,
736, 832, 0, 350, 382, 385, 445, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x02 - 640x400@85Hz */
{ DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 31500, 640, 672,
736, 832, 0, 400, 401, 404, 445, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x03 - 720x400@85Hz */
{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 756,
828, 936, 0, 400, 401, 404, 446, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x04 - 640x480@60Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656,
752, 800, 0, 480, 490, 492, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x05 - 640x480@72Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
704, 832, 0, 480, 489, 492, 520, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x06 - 640x480@75Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656,
720, 840, 0, 480, 481, 484, 500, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x07 - 640x480@85Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 36000, 640, 696,
752, 832, 0, 480, 481, 484, 509, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x08 - 800x600@56Hz */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824,
896, 1024, 0, 600, 601, 603, 625, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x09 - 800x600@60Hz */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
968, 1056, 0, 600, 601, 605, 628, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x0a - 800x600@72Hz */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856,
976, 1040, 0, 600, 637, 643, 666, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x0b - 800x600@75Hz */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816,
896, 1056, 0, 600, 601, 604, 625, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x0c - 800x600@85Hz */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 56250, 800, 832,
896, 1048, 0, 600, 601, 604, 631, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x0d - 800x600@120Hz RB */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 73250, 800, 848,
880, 960, 0, 600, 603, 607, 636, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x0e - 848x480@60Hz */
{ DRM_MODE("848x480", DRM_MODE_TYPE_DRIVER, 33750, 848, 864,
976, 1088, 0, 480, 486, 494, 517, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x0f - 1024x768@43Hz, interlace */
{ DRM_MODE("1024x768i", DRM_MODE_TYPE_DRIVER, 44900, 1024, 1032,
1208, 1264, 0, 768, 768, 772, 817, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC |
DRM_MODE_FLAG_INTERLACE) },
/* 0x10 - 1024x768@60Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
1184, 1344, 0, 768, 771, 777, 806, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x11 - 1024x768@70Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
1184, 1328, 0, 768, 771, 777, 806, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x12 - 1024x768@75Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78750, 1024, 1040,
1136, 1312, 0, 768, 769, 772, 800, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x13 - 1024x768@85Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 94500, 1024, 1072,
1168, 1376, 0, 768, 769, 772, 808, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x14 - 1024x768@120Hz RB */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 115500, 1024, 1072,
1104, 1184, 0, 768, 771, 775, 813, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x15 - 1152x864@75Hz */
{ DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
1344, 1600, 0, 864, 865, 868, 900, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x55 - 1280x720@60Hz */
{ DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1390,
1430, 1650, 0, 720, 725, 730, 750, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x16 - 1280x768@60Hz RB */
{ DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 68250, 1280, 1328,
1360, 1440, 0, 768, 771, 778, 790, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x17 - 1280x768@60Hz */
{ DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 79500, 1280, 1344,
1472, 1664, 0, 768, 771, 778, 798, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x18 - 1280x768@75Hz */
{ DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 102250, 1280, 1360,
1488, 1696, 0, 768, 771, 778, 805, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x19 - 1280x768@85Hz */
{ DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 117500, 1280, 1360,
1496, 1712, 0, 768, 771, 778, 809, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x1a - 1280x768@120Hz RB */
{ DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 140250, 1280, 1328,
1360, 1440, 0, 768, 771, 778, 813, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x1b - 1280x800@60Hz RB */
{ DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 71000, 1280, 1328,
1360, 1440, 0, 800, 803, 809, 823, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x1c - 1280x800@60Hz */
{ DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 83500, 1280, 1352,
1480, 1680, 0, 800, 803, 809, 831, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x1d - 1280x800@75Hz */
{ DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 106500, 1280, 1360,
1488, 1696, 0, 800, 803, 809, 838, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x1e - 1280x800@85Hz */
{ DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 122500, 1280, 1360,
1496, 1712, 0, 800, 803, 809, 843, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x1f - 1280x800@120Hz RB */
{ DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 146250, 1280, 1328,
1360, 1440, 0, 800, 803, 809, 847, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x20 - 1280x960@60Hz */
{ DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1376,
1488, 1800, 0, 960, 961, 964, 1000, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x21 - 1280x960@85Hz */
{ DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1344,
1504, 1728, 0, 960, 961, 964, 1011, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x22 - 1280x960@120Hz RB */
{ DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 175500, 1280, 1328,
1360, 1440, 0, 960, 963, 967, 1017, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x23 - 1280x1024@60Hz */
{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1328,
1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x24 - 1280x1024@75Hz */
{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x25 - 1280x1024@85Hz */
{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 157500, 1280, 1344,
1504, 1728, 0, 1024, 1025, 1028, 1072, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x26 - 1280x1024@120Hz RB */
{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 187250, 1280, 1328,
1360, 1440, 0, 1024, 1027, 1034, 1084, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x27 - 1360x768@60Hz */
{ DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 85500, 1360, 1424,
1536, 1792, 0, 768, 771, 777, 795, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x28 - 1360x768@120Hz RB */
{ DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 148250, 1360, 1408,
1440, 1520, 0, 768, 771, 776, 813, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x51 - 1366x768@60Hz */
{ DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 85500, 1366, 1436,
1579, 1792, 0, 768, 771, 774, 798, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x56 - 1366x768@60Hz */
{ DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 72000, 1366, 1380,
1436, 1500, 0, 768, 769, 772, 800, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x29 - 1400x1050@60Hz RB */
{ DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 101000, 1400, 1448,
1480, 1560, 0, 1050, 1053, 1057, 1080, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x2a - 1400x1050@60Hz */
{ DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 121750, 1400, 1488,
1632, 1864, 0, 1050, 1053, 1057, 1089, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x2b - 1400x1050@75Hz */
{ DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 156000, 1400, 1504,
1648, 1896, 0, 1050, 1053, 1057, 1099, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x2c - 1400x1050@85Hz */
{ DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 179500, 1400, 1504,
1656, 1912, 0, 1050, 1053, 1057, 1105, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x2d - 1400x1050@120Hz RB */
{ DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 208000, 1400, 1448,
1480, 1560, 0, 1050, 1053, 1057, 1112, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x2e - 1440x900@60Hz RB */
{ DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 88750, 1440, 1488,
1520, 1600, 0, 900, 903, 909, 926, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x2f - 1440x900@60Hz */
{ DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 106500, 1440, 1520,
1672, 1904, 0, 900, 903, 909, 934, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x30 - 1440x900@75Hz */
{ DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 136750, 1440, 1536,
1688, 1936, 0, 900, 903, 909, 942, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x31 - 1440x900@85Hz */
{ DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 157000, 1440, 1544,
1696, 1952, 0, 900, 903, 909, 948, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x32 - 1440x900@120Hz RB */
{ DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 182750, 1440, 1488,
1520, 1600, 0, 900, 903, 909, 953, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x53 - 1600x900@60Hz */
{ DRM_MODE("1600x900", DRM_MODE_TYPE_DRIVER, 108000, 1600, 1624,
1704, 1800, 0, 900, 901, 904, 1000, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x33 - 1600x1200@60Hz */
{ DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 162000, 1600, 1664,
1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x34 - 1600x1200@65Hz */
{ DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 175500, 1600, 1664,
1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x35 - 1600x1200@70Hz */
{ DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 189000, 1600, 1664,
1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x36 - 1600x1200@75Hz */
{ DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 202500, 1600, 1664,
1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x37 - 1600x1200@85Hz */
{ DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 229500, 1600, 1664,
1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x38 - 1600x1200@120Hz RB */
{ DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 268250, 1600, 1648,
1680, 1760, 0, 1200, 1203, 1207, 1271, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x39 - 1680x1050@60Hz RB */
{ DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 119000, 1680, 1728,
1760, 1840, 0, 1050, 1053, 1059, 1080, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x3a - 1680x1050@60Hz */
{ DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 146250, 1680, 1784,
1960, 2240, 0, 1050, 1053, 1059, 1089, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x3b - 1680x1050@75Hz */
{ DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 187000, 1680, 1800,
1976, 2272, 0, 1050, 1053, 1059, 1099, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x3c - 1680x1050@85Hz */
{ DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 214750, 1680, 1808,
1984, 2288, 0, 1050, 1053, 1059, 1105, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x3d - 1680x1050@120Hz RB */
{ DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 245500, 1680, 1728,
1760, 1840, 0, 1050, 1053, 1059, 1112, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x3e - 1792x1344@60Hz */
{ DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 204750, 1792, 1920,
2120, 2448, 0, 1344, 1345, 1348, 1394, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x3f - 1792x1344@75Hz */
{ DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 261000, 1792, 1888,
2104, 2456, 0, 1344, 1345, 1348, 1417, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x40 - 1792x1344@120Hz RB */
{ DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 333250, 1792, 1840,
1872, 1952, 0, 1344, 1347, 1351, 1423, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x41 - 1856x1392@60Hz */
{ DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 218250, 1856, 1952,
2176, 2528, 0, 1392, 1393, 1396, 1439, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x42 - 1856x1392@75Hz */
{ DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 288000, 1856, 1984,
2208, 2560, 0, 1392, 1393, 1396, 1500, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x43 - 1856x1392@120Hz RB */
{ DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 356500, 1856, 1904,
1936, 2016, 0, 1392, 1395, 1399, 1474, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x52 - 1920x1080@60Hz */
{ DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2008,
2052, 2200, 0, 1080, 1084, 1089, 1125, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x44 - 1920x1200@60Hz RB */
{ DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 154000, 1920, 1968,
2000, 2080, 0, 1200, 1203, 1209, 1235, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x45 - 1920x1200@60Hz */
{ DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 193250, 1920, 2056,
2256, 2592, 0, 1200, 1203, 1209, 1245, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x46 - 1920x1200@75Hz */
{ DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 245250, 1920, 2056,
2264, 2608, 0, 1200, 1203, 1209, 1255, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x47 - 1920x1200@85Hz */
{ DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 281250, 1920, 2064,
2272, 2624, 0, 1200, 1203, 1209, 1262, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x48 - 1920x1200@120Hz RB */
{ DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 317000, 1920, 1968,
2000, 2080, 0, 1200, 1203, 1209, 1271, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x49 - 1920x1440@60Hz */
{ DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 234000, 1920, 2048,
2256, 2600, 0, 1440, 1441, 1444, 1500, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x4a - 1920x1440@75Hz */
{ DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2064,
2288, 2640, 0, 1440, 1441, 1444, 1500, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x4b - 1920x1440@120Hz RB */
{ DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 380500, 1920, 1968,
2000, 2080, 0, 1440, 1443, 1447, 1525, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x54 - 2048x1152@60Hz */
{ DRM_MODE("2048x1152", DRM_MODE_TYPE_DRIVER, 162000, 2048, 2074,
2154, 2250, 0, 1152, 1153, 1156, 1200, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x4c - 2560x1600@60Hz RB */
{ DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 268500, 2560, 2608,
2640, 2720, 0, 1600, 1603, 1609, 1646, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x4d - 2560x1600@60Hz */
{ DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 348500, 2560, 2752,
3032, 3504, 0, 1600, 1603, 1609, 1658, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x4e - 2560x1600@75Hz */
{ DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 443250, 2560, 2768,
3048, 3536, 0, 1600, 1603, 1609, 1672, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x4f - 2560x1600@85Hz */
{ DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 505250, 2560, 2768,
3048, 3536, 0, 1600, 1603, 1609, 1682, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
/* 0x50 - 2560x1600@120Hz RB */
{ DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 552750, 2560, 2608,
2640, 2720, 0, 1600, 1603, 1609, 1694, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x57 - 4096x2160@60Hz RB */
{ DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 556744, 4096, 4104,
4136, 4176, 0, 2160, 2208, 2216, 2222, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
/* 0x58 - 4096x2160@59.94Hz RB */
{ DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 556188, 4096, 4104,
4136, 4176, 0, 2160, 2208, 2216, 2222, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },
};
/*
* These more or less come from the DMT spec. The 720x400 modes are
* inferred from historical 80x25 practice. The 640x480@67 and 832x624@75
* modes are old-school Mac modes. The EDID spec says the 1152x864@75 mode
* should be 1152x870, again for the Mac, but instead we use the x864 DMT
* mode.
*
* The DMT modes have been fact-checked; the rest are mild guesses.
*/
static const struct drm_display_mode edid_est_modes[] = {
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
968, 1056, 0, 600, 601, 605, 628, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@60Hz */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824,
896, 1024, 0, 600, 601, 603, 625, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@56Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656,
720, 840, 0, 480, 481, 484, 500, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@75Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
704, 832, 0, 480, 489, 491, 520, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@72Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704,
768, 864, 0, 480, 483, 486, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@67Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25200, 640, 656,
752, 800, 0, 480, 490, 492, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@60Hz */
{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738,
846, 900, 0, 400, 421, 423, 449, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 720x400@88Hz */
{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 28320, 720, 738,
846, 900, 0, 400, 412, 414, 449, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 720x400@70Hz */
{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1280x1024@75Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78800, 1024, 1040,
1136, 1312, 0, 768, 769, 772, 800, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1024x768@75Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
1184, 1328, 0, 768, 771, 777, 806, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@70Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
1184, 1344, 0, 768, 771, 777, 806, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@60Hz */
{ DRM_MODE("1024x768i", DRM_MODE_TYPE_DRIVER,44900, 1024, 1032,
1208, 1264, 0, 768, 768, 776, 817, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_INTERLACE) }, /* 1024x768@43Hz */
{ DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 57284, 832, 864,
928, 1152, 0, 624, 625, 628, 667, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 832x624@75Hz */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816,
896, 1056, 0, 600, 601, 604, 625, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@75Hz */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856,
976, 1040, 0, 600, 637, 643, 666, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@72Hz */
{ DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
1344, 1600, 0, 864, 865, 868, 900, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1152x864@75Hz */
};
struct minimode {
short w;
short h;
short r;
short rb;
};
static const struct minimode est3_modes[] = {
/* byte 6 */
{ 640, 350, 85, 0 },
{ 640, 400, 85, 0 },
{ 720, 400, 85, 0 },
{ 640, 480, 85, 0 },
{ 848, 480, 60, 0 },
{ 800, 600, 85, 0 },
{ 1024, 768, 85, 0 },
{ 1152, 864, 75, 0 },
/* byte 7 */
{ 1280, 768, 60, 1 },
{ 1280, 768, 60, 0 },
{ 1280, 768, 75, 0 },
{ 1280, 768, 85, 0 },
{ 1280, 960, 60, 0 },
{ 1280, 960, 85, 0 },
{ 1280, 1024, 60, 0 },
{ 1280, 1024, 85, 0 },
/* byte 8 */
{ 1360, 768, 60, 0 },
{ 1440, 900, 60, 1 },
{ 1440, 900, 60, 0 },
{ 1440, 900, 75, 0 },
{ 1440, 900, 85, 0 },
{ 1400, 1050, 60, 1 },
{ 1400, 1050, 60, 0 },
{ 1400, 1050, 75, 0 },
/* byte 9 */
{ 1400, 1050, 85, 0 },
{ 1680, 1050, 60, 1 },
{ 1680, 1050, 60, 0 },
{ 1680, 1050, 75, 0 },
{ 1680, 1050, 85, 0 },
{ 1600, 1200, 60, 0 },
{ 1600, 1200, 65, 0 },
{ 1600, 1200, 70, 0 },
/* byte 10 */
{ 1600, 1200, 75, 0 },
{ 1600, 1200, 85, 0 },
{ 1792, 1344, 60, 0 },
{ 1792, 1344, 75, 0 },
{ 1856, 1392, 60, 0 },
{ 1856, 1392, 75, 0 },
{ 1920, 1200, 60, 1 },
{ 1920, 1200, 60, 0 },
/* byte 11 */
{ 1920, 1200, 75, 0 },
{ 1920, 1200, 85, 0 },
{ 1920, 1440, 60, 0 },
{ 1920, 1440, 75, 0 },
};
static const struct minimode extra_modes[] = {
{ 1024, 576, 60, 0 },
{ 1366, 768, 60, 0 },
{ 1600, 900, 60, 0 },
{ 1680, 945, 60, 0 },
{ 1920, 1080, 60, 0 },
{ 2048, 1152, 60, 0 },
{ 2048, 1536, 60, 0 },
};
/*
* Probably taken from CEA-861 spec.
* This table is converted from xorg's hw/xfree86/modes/xf86EdidModes.c.
*
* Index using the VIC.
*/
static const struct drm_display_mode edid_cea_modes[] = {
/* 0 - dummy, VICs start at 1 */
{ },
/* 1 - 640x480@60Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656,
752, 800, 0, 480, 490, 492, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 2 - 720x480@60Hz */
{ DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 27000, 720, 736,
798, 858, 0, 480, 489, 495, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 3 - 720x480@60Hz */
{ DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 27000, 720, 736,
798, 858, 0, 480, 489, 495, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 4 - 1280x720@60Hz */
{ DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1390,
1430, 1650, 0, 720, 725, 730, 750, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 5 - 1920x1080i@60Hz */
{ DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2008,
2052, 2200, 0, 1080, 1084, 1094, 1125, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC |
DRM_MODE_FLAG_INTERLACE),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 6 - 720(1440)x480i@60Hz */
{ DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 13500, 720, 739,
801, 858, 0, 480, 488, 494, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 7 - 720(1440)x480i@60Hz */
{ DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 13500, 720, 739,
801, 858, 0, 480, 488, 494, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 8 - 720(1440)x240@60Hz */
{ DRM_MODE("720x240", DRM_MODE_TYPE_DRIVER, 13500, 720, 739,
801, 858, 0, 240, 244, 247, 262, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_DBLCLK),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 9 - 720(1440)x240@60Hz */
{ DRM_MODE("720x240", DRM_MODE_TYPE_DRIVER, 13500, 720, 739,
801, 858, 0, 240, 244, 247, 262, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_DBLCLK),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 10 - 2880x480i@60Hz */
{ DRM_MODE("2880x480i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956,
3204, 3432, 0, 480, 488, 494, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 11 - 2880x480i@60Hz */
{ DRM_MODE("2880x480i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956,
3204, 3432, 0, 480, 488, 494, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 12 - 2880x240@60Hz */
{ DRM_MODE("2880x240", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956,
3204, 3432, 0, 240, 244, 247, 262, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 13 - 2880x240@60Hz */
{ DRM_MODE("2880x240", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956,
3204, 3432, 0, 240, 244, 247, 262, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 14 - 1440x480@60Hz */
{ DRM_MODE("1440x480", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1472,
1596, 1716, 0, 480, 489, 495, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 15 - 1440x480@60Hz */
{ DRM_MODE("1440x480", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1472,
1596, 1716, 0, 480, 489, 495, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 16 - 1920x1080@60Hz */
{ DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2008,
2052, 2200, 0, 1080, 1084, 1089, 1125, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 17 - 720x576@50Hz */
{ DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 27000, 720, 732,
796, 864, 0, 576, 581, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 18 - 720x576@50Hz */
{ DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 27000, 720, 732,
796, 864, 0, 576, 581, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 19 - 1280x720@50Hz */
{ DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1720,
1760, 1980, 0, 720, 725, 730, 750, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 20 - 1920x1080i@50Hz */
{ DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2448,
2492, 2640, 0, 1080, 1084, 1094, 1125, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC |
DRM_MODE_FLAG_INTERLACE),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 21 - 720(1440)x576i@50Hz */
{ DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 13500, 720, 732,
795, 864, 0, 576, 580, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 22 - 720(1440)x576i@50Hz */
{ DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 13500, 720, 732,
795, 864, 0, 576, 580, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 23 - 720(1440)x288@50Hz */
{ DRM_MODE("720x288", DRM_MODE_TYPE_DRIVER, 13500, 720, 732,
795, 864, 0, 288, 290, 293, 312, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_DBLCLK),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 24 - 720(1440)x288@50Hz */
{ DRM_MODE("720x288", DRM_MODE_TYPE_DRIVER, 13500, 720, 732,
795, 864, 0, 288, 290, 293, 312, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_DBLCLK),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 25 - 2880x576i@50Hz */
{ DRM_MODE("2880x576i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928,
3180, 3456, 0, 576, 580, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 26 - 2880x576i@50Hz */
{ DRM_MODE("2880x576i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928,
3180, 3456, 0, 576, 580, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 27 - 2880x288@50Hz */
{ DRM_MODE("2880x288", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928,
3180, 3456, 0, 288, 290, 293, 312, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 28 - 2880x288@50Hz */
{ DRM_MODE("2880x288", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928,
3180, 3456, 0, 288, 290, 293, 312, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 29 - 1440x576@50Hz */
{ DRM_MODE("1440x576", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1464,
1592, 1728, 0, 576, 581, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 30 - 1440x576@50Hz */
{ DRM_MODE("1440x576", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1464,
1592, 1728, 0, 576, 581, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 31 - 1920x1080@50Hz */
{ DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2448,
2492, 2640, 0, 1080, 1084, 1089, 1125, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 32 - 1920x1080@24Hz */
{ DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2558,
2602, 2750, 0, 1080, 1084, 1089, 1125, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 33 - 1920x1080@25Hz */
{ DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2448,
2492, 2640, 0, 1080, 1084, 1089, 1125, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 34 - 1920x1080@30Hz */
{ DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2008,
2052, 2200, 0, 1080, 1084, 1089, 1125, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 35 - 2880x480@60Hz */
{ DRM_MODE("2880x480", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2944,
3192, 3432, 0, 480, 489, 495, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 36 - 2880x480@60Hz */
{ DRM_MODE("2880x480", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2944,
3192, 3432, 0, 480, 489, 495, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 37 - 2880x576@50Hz */
{ DRM_MODE("2880x576", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2928,
3184, 3456, 0, 576, 581, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 38 - 2880x576@50Hz */
{ DRM_MODE("2880x576", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2928,
3184, 3456, 0, 576, 581, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 39 - 1920x1080i@50Hz */
{ DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 72000, 1920, 1952,
2120, 2304, 0, 1080, 1126, 1136, 1250, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE),
.vrefresh = 50, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 40 - 1920x1080i@100Hz */
{ DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2448,
2492, 2640, 0, 1080, 1084, 1094, 1125, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC |
DRM_MODE_FLAG_INTERLACE),
.vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 41 - 1280x720@100Hz */
{ DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1720,
1760, 1980, 0, 720, 725, 730, 750, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 42 - 720x576@100Hz */
{ DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 54000, 720, 732,
796, 864, 0, 576, 581, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 43 - 720x576@100Hz */
{ DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 54000, 720, 732,
796, 864, 0, 576, 581, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 44 - 720(1440)x576i@100Hz */
{ DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 27000, 720, 732,
795, 864, 0, 576, 580, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 45 - 720(1440)x576i@100Hz */
{ DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 27000, 720, 732,
795, 864, 0, 576, 580, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 46 - 1920x1080i@120Hz */
{ DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2008,
2052, 2200, 0, 1080, 1084, 1094, 1125, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC |
DRM_MODE_FLAG_INTERLACE),
.vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 47 - 1280x720@120Hz */
{ DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1390,
1430, 1650, 0, 720, 725, 730, 750, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 48 - 720x480@120Hz */
{ DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 54000, 720, 736,
798, 858, 0, 480, 489, 495, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 49 - 720x480@120Hz */
{ DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 54000, 720, 736,
798, 858, 0, 480, 489, 495, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 50 - 720(1440)x480i@120Hz */
{ DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 27000, 720, 739,
801, 858, 0, 480, 488, 494, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 51 - 720(1440)x480i@120Hz */
{ DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 27000, 720, 739,
801, 858, 0, 480, 488, 494, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 52 - 720x576@200Hz */
{ DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 108000, 720, 732,
796, 864, 0, 576, 581, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 200, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 53 - 720x576@200Hz */
{ DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 108000, 720, 732,
796, 864, 0, 576, 581, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 200, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 54 - 720(1440)x576i@200Hz */
{ DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 54000, 720, 732,
795, 864, 0, 576, 580, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 200, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 55 - 720(1440)x576i@200Hz */
{ DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 54000, 720, 732,
795, 864, 0, 576, 580, 586, 625, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 200, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 56 - 720x480@240Hz */
{ DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 108000, 720, 736,
798, 858, 0, 480, 489, 495, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 240, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 57 - 720x480@240Hz */
{ DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 108000, 720, 736,
798, 858, 0, 480, 489, 495, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
.vrefresh = 240, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 58 - 720(1440)x480i@240 */
{ DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 54000, 720, 739,
801, 858, 0, 480, 488, 494, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 240, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, },
/* 59 - 720(1440)x480i@240 */
{ DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 54000, 720, 739,
801, 858, 0, 480, 488, 494, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC |
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK),
.vrefresh = 240, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 60 - 1280x720@24Hz */
{ DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 59400, 1280, 3040,
3080, 3300, 0, 720, 725, 730, 750, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 61 - 1280x720@25Hz */
{ DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 3700,
3740, 3960, 0, 720, 725, 730, 750, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 62 - 1280x720@30Hz */
{ DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 3040,
3080, 3300, 0, 720, 725, 730, 750, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 63 - 1920x1080@120Hz */
{ DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2008,
2052, 2200, 0, 1080, 1084, 1089, 1125, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 120, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
/* 64 - 1920x1080@100Hz */
{ DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2448,
2492, 2640, 0, 1080, 1084, 1094, 1125, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 100, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
};
/*
* HDMI 1.4 4k modes. Index using the VIC.
*/
static const struct drm_display_mode edid_4k_modes[] = {
/* 0 - dummy, VICs start at 1 */
{ },
/* 1 - 3840x2160@30Hz */
{ DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000,
3840, 4016, 4104, 4400, 0,
2160, 2168, 2178, 2250, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 30, },
/* 2 - 3840x2160@25Hz */
{ DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000,
3840, 4896, 4984, 5280, 0,
2160, 2168, 2178, 2250, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 25, },
/* 3 - 3840x2160@24Hz */
{ DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000,
3840, 5116, 5204, 5500, 0,
2160, 2168, 2178, 2250, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 24, },
/* 4 - 4096x2160@24Hz (SMPTE) */
{ DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 297000,
4096, 5116, 5204, 5500, 0,
2160, 2168, 2178, 2250, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
.vrefresh = 24, },
};
/*** DDC fetch and block validation ***/
static const u8 edid_header[] = {
0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
};
/**
* drm_edid_header_is_valid - sanity check the header of the base EDID block
* @raw_edid: pointer to raw base EDID block
*
* Sanity check the header of the base EDID block.
*
* Return: 8 if the header is perfect, down to 0 if it's totally wrong.
*/
int drm_edid_header_is_valid(const u8 *raw_edid)
{
int i, score = 0;
for (i = 0; i < sizeof(edid_header); i++)
if (raw_edid[i] == edid_header[i])
score++;
return score;
}
EXPORT_SYMBOL(drm_edid_header_is_valid);
static int edid_fixup __read_mostly = 6;
module_param_named(edid_fixup, edid_fixup, int, 0400);
MODULE_PARM_DESC(edid_fixup,
"Minimum number of valid EDID header bytes (0-8, default 6)");
static void drm_get_displayid(struct drm_connector *connector,
struct edid *edid);
static int drm_edid_block_checksum(const u8 *raw_edid)
{
int i;
u8 csum = 0;
for (i = 0; i < EDID_LENGTH; i++)
csum += raw_edid[i];
return csum;
}
static bool drm_edid_is_zero(const u8 *in_edid, int length)
{
if (memchr_inv(in_edid, 0, length))
return false;
return true;
}
/**
* drm_edid_block_valid - Sanity check the EDID block (base or extension)
* @raw_edid: pointer to raw EDID block
* @block: type of block to validate (0 for base, extension otherwise)
* @print_bad_edid: if true, dump bad EDID blocks to the console
drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6 Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. This flag is also set in the case of a more seriously damaged header (fixup score less than the threshold). For consistency, the edid_corrupt flag is also set when the checksum is invalid as well. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message V10: - Updated for versioning and patch swizzle - Revised the title to more accurately reflect the nature and contents of the patch - Fixed formatting/whitespace problems - Added set flag when computed checksum is invalid Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-22 02:09:41 +08:00
* @edid_corrupt: if true, the header or checksum is invalid
*
* Validate a base or extension EDID block and optionally dump bad blocks to
* the console.
*
* Return: True if the block is valid, false otherwise.
*/
drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6 Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. This flag is also set in the case of a more seriously damaged header (fixup score less than the threshold). For consistency, the edid_corrupt flag is also set when the checksum is invalid as well. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message V10: - Updated for versioning and patch swizzle - Revised the title to more accurately reflect the nature and contents of the patch - Fixed formatting/whitespace problems - Added set flag when computed checksum is invalid Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-22 02:09:41 +08:00
bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid,
bool *edid_corrupt)
{
u8 csum;
struct edid *edid = (struct edid *)raw_edid;
if (WARN_ON(!raw_edid))
return false;
if (edid_fixup > 8 || edid_fixup < 0)
edid_fixup = 6;
if (block == 0) {
int score = drm_edid_header_is_valid(raw_edid);
drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6 Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. This flag is also set in the case of a more seriously damaged header (fixup score less than the threshold). For consistency, the edid_corrupt flag is also set when the checksum is invalid as well. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message V10: - Updated for versioning and patch swizzle - Revised the title to more accurately reflect the nature and contents of the patch - Fixed formatting/whitespace problems - Added set flag when computed checksum is invalid Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-22 02:09:41 +08:00
if (score == 8) {
if (edid_corrupt)
*edid_corrupt = false;
drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6 Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. This flag is also set in the case of a more seriously damaged header (fixup score less than the threshold). For consistency, the edid_corrupt flag is also set when the checksum is invalid as well. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message V10: - Updated for versioning and patch swizzle - Revised the title to more accurately reflect the nature and contents of the patch - Fixed formatting/whitespace problems - Added set flag when computed checksum is invalid Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-22 02:09:41 +08:00
} else if (score >= edid_fixup) {
/* Displayport Link CTS Core 1.2 rev1.1 test 4.2.2.6
* The corrupt flag needs to be set here otherwise, the
* fix-up code here will correct the problem, the
* checksum is correct and the test fails
*/
if (edid_corrupt)
*edid_corrupt = true;
DRM_DEBUG("Fixing EDID header, your hardware may be failing\n");
memcpy(raw_edid, edid_header, sizeof(edid_header));
} else {
drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6 Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. This flag is also set in the case of a more seriously damaged header (fixup score less than the threshold). For consistency, the edid_corrupt flag is also set when the checksum is invalid as well. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message V10: - Updated for versioning and patch swizzle - Revised the title to more accurately reflect the nature and contents of the patch - Fixed formatting/whitespace problems - Added set flag when computed checksum is invalid Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-22 02:09:41 +08:00
if (edid_corrupt)
*edid_corrupt = true;
goto bad;
}
}
csum = drm_edid_block_checksum(raw_edid);
if (csum) {
if (print_bad_edid) {
DRM_ERROR("EDID checksum is invalid, remainder is %d\n", csum);
}
drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6 Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. This flag is also set in the case of a more seriously damaged header (fixup score less than the threshold). For consistency, the edid_corrupt flag is also set when the checksum is invalid as well. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message V10: - Updated for versioning and patch swizzle - Revised the title to more accurately reflect the nature and contents of the patch - Fixed formatting/whitespace problems - Added set flag when computed checksum is invalid Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-22 02:09:41 +08:00
if (edid_corrupt)
*edid_corrupt = true;
drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6 Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. This flag is also set in the case of a more seriously damaged header (fixup score less than the threshold). For consistency, the edid_corrupt flag is also set when the checksum is invalid as well. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message V10: - Updated for versioning and patch swizzle - Revised the title to more accurately reflect the nature and contents of the patch - Fixed formatting/whitespace problems - Added set flag when computed checksum is invalid Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-22 02:09:41 +08:00
/* allow CEA to slide through, switches mangle this */
if (raw_edid[0] != 0x02)
goto bad;
}
/* per-block-type checks */
switch (raw_edid[0]) {
case 0: /* base */
if (edid->version != 1) {
DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version);
goto bad;
}
if (edid->revision > 4)
DRM_DEBUG("EDID minor > 4, assuming backward compatibility\n");
break;
default:
break;
}
return true;
bad:
if (print_bad_edid) {
if (drm_edid_is_zero(raw_edid, EDID_LENGTH)) {
printk(KERN_ERR "EDID block is all zeroes\n");
} else {
printk(KERN_ERR "Raw EDID:\n");
print_hex_dump(KERN_ERR, " \t", DUMP_PREFIX_NONE, 16, 1,
raw_edid, EDID_LENGTH, false);
}
}
return false;
}
drm: allow loading an EDID as firmware to override broken monitor Broken monitors and/or broken graphic boards may send erroneous or no EDID data. This also applies to broken KVM devices that are unable to correctly forward the EDID data of the connected monitor but invent their own fantasy data. This patch allows to specify an EDID data set to be used instead of probing the monitor for it. It contains built-in data sets of frequently used screen resolutions. In addition, a particular EDID data set may be provided in the /lib/firmware directory and loaded via the firmware interface. The name is passed to the kernel as module parameter of the drm_kms_helper module either when loaded options drm_kms_helper edid_firmware=edid/1280x1024.bin or as kernel commandline parameter drm_kms_helper.edid_firmware=edid/1280x1024.bin It is also possible to restrict the usage of a specified EDID data set to a particular connector. This is done by prepending the name of the connector to the name of the EDID data set using the syntax edid_firmware=[<connector>:]<edid> such as, for example, edid_firmware=DVI-I-1:edid/1920x1080.bin in which case no other connector will be affected. The built-in data sets are Resolution Name -------------------------------- 1024x768 edid/1024x768.bin 1280x1024 edid/1280x1024.bin 1680x1050 edid/1680x1050.bin 1920x1080 edid/1920x1080.bin They are ignored, if a file with the same name is available in the /lib/firmware directory. The built-in EDID data sets are based on standard timings that may not apply to a particular monitor and even crash it. Ideally, EDID data of the connected monitor should be used. They may be obtained through the drm/cardX/cardX-<connector>/edid entry in the /sys/devices PCI directory of a correctly working graphics adapter. It is even possible to specify the name of an EDID data set on-the-fly via the /sys/module interface, e.g. echo edid/myedid.bin >/sys/module/drm_kms_helper/parameters/edid_firmware The new screen mode is considered when the related kernel function is called for the first time after the change. Such calls are made when the X server is started or when the display settings dialog is opened in an already running X server. Signed-off-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-19 05:37:33 +08:00
EXPORT_SYMBOL(drm_edid_block_valid);
/**
* drm_edid_is_valid - sanity check EDID data
* @edid: EDID data
*
* Sanity-check an entire EDID record (including extensions)
*
* Return: True if the EDID data is valid, false otherwise.
*/
bool drm_edid_is_valid(struct edid *edid)
{
int i;
u8 *raw = (u8 *)edid;
if (!edid)
return false;
for (i = 0; i <= edid->extensions; i++)
drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6 Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. This flag is also set in the case of a more seriously damaged header (fixup score less than the threshold). For consistency, the edid_corrupt flag is also set when the checksum is invalid as well. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message V10: - Updated for versioning and patch swizzle - Revised the title to more accurately reflect the nature and contents of the patch - Fixed formatting/whitespace problems - Added set flag when computed checksum is invalid Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-22 02:09:41 +08:00
if (!drm_edid_block_valid(raw + i * EDID_LENGTH, i, true, NULL))
return false;
return true;
}
EXPORT_SYMBOL(drm_edid_is_valid);
#define DDC_SEGMENT_ADDR 0x30
/**
* drm_do_probe_ddc_edid() - get EDID information via I2C
* @data: I2C device adapter
* @buf: EDID data buffer to be filled
* @block: 128 byte EDID block to start fetching from
* @len: EDID data buffer length to fetch
*
* Try to fetch EDID information by calling I2C driver functions.
*
* Return: 0 on success or -1 on failure.
*/
static int
drm_do_probe_ddc_edid(void *data, u8 *buf, unsigned int block, size_t len)
{
struct i2c_adapter *adapter = data;
unsigned char start = block * EDID_LENGTH;
unsigned char segment = block >> 1;
unsigned char xfers = segment ? 3 : 2;
int ret, retries = 5;
/*
* The core I2C driver will automatically retry the transfer if the
* adapter reports EAGAIN. However, we find that bit-banging transfers
* are susceptible to errors under a heavily loaded machine and
* generate spurious NAKs and timeouts. Retrying the transfer
* of the individual block a few times seems to overcome this.
*/
do {
struct i2c_msg msgs[] = {
{
.addr = DDC_SEGMENT_ADDR,
.flags = 0,
.len = 1,
.buf = &segment,
}, {
.addr = DDC_ADDR,
.flags = 0,
.len = 1,
.buf = &start,
}, {
.addr = DDC_ADDR,
.flags = I2C_M_RD,
.len = len,
.buf = buf,
}
};
/*
* Avoid sending the segment addr to not upset non-compliant
* DDC monitors.
*/
ret = i2c_transfer(adapter, &msgs[3 - xfers], xfers);
if (ret == -ENXIO) {
DRM_DEBUG_KMS("drm: skipping non-existent adapter %s\n",
adapter->name);
break;
}
} while (ret != xfers && --retries);
return ret == xfers ? 0 : -1;
}
/**
* drm_do_get_edid - get EDID data using a custom EDID block read function
* @connector: connector we're probing
* @get_edid_block: EDID block read function
* @data: private data passed to the block read function
*
* When the I2C adapter connected to the DDC bus is hidden behind a device that
* exposes a different interface to read EDID blocks this function can be used
* to get EDID data using a custom block read function.
*
* As in the general case the DDC bus is accessible by the kernel at the I2C
* level, drivers must make all reasonable efforts to expose it as an I2C
* adapter and use drm_get_edid() instead of abusing this function.
*
* Return: Pointer to valid EDID or NULL if we couldn't find any.
*/
struct edid *drm_do_get_edid(struct drm_connector *connector,
int (*get_edid_block)(void *data, u8 *buf, unsigned int block,
size_t len),
void *data)
{
int i, j = 0, valid_extensions = 0;
u8 *block, *new;
bool print_bad_edid = !connector->bad_edid_counter || (drm_debug & DRM_UT_KMS);
if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
return NULL;
/* base block fetch */
for (i = 0; i < 4; i++) {
if (get_edid_block(data, block, 0, EDID_LENGTH))
goto out;
drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6 Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. This flag is also set in the case of a more seriously damaged header (fixup score less than the threshold). For consistency, the edid_corrupt flag is also set when the checksum is invalid as well. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message V10: - Updated for versioning and patch swizzle - Revised the title to more accurately reflect the nature and contents of the patch - Fixed formatting/whitespace problems - Added set flag when computed checksum is invalid Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-22 02:09:41 +08:00
if (drm_edid_block_valid(block, 0, print_bad_edid,
&connector->edid_corrupt))
break;
if (i == 0 && drm_edid_is_zero(block, EDID_LENGTH)) {
connector->null_edid_counter++;
goto carp;
}
}
if (i == 4)
goto carp;
/* if there's no extensions, we're done */
if (block[0x7e] == 0)
return (struct edid *)block;
new = krealloc(block, (block[0x7e] + 1) * EDID_LENGTH, GFP_KERNEL);
if (!new)
goto out;
block = new;
for (j = 1; j <= block[0x7e]; j++) {
for (i = 0; i < 4; i++) {
if (get_edid_block(data,
block + (valid_extensions + 1) * EDID_LENGTH,
j, EDID_LENGTH))
goto out;
drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6 Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. This flag is also set in the case of a more seriously damaged header (fixup score less than the threshold). For consistency, the edid_corrupt flag is also set when the checksum is invalid as well. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message V10: - Updated for versioning and patch swizzle - Revised the title to more accurately reflect the nature and contents of the patch - Fixed formatting/whitespace problems - Added set flag when computed checksum is invalid Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-22 02:09:41 +08:00
if (drm_edid_block_valid(block + (valid_extensions + 1)
* EDID_LENGTH, j,
print_bad_edid,
NULL)) {
valid_extensions++;
break;
}
}
if (i == 4 && print_bad_edid) {
dev_warn(connector->dev->dev,
"%s: Ignoring invalid EDID block %d.\n",
connector->name, j);
connector->bad_edid_counter++;
}
}
if (valid_extensions != block[0x7e]) {
block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
block[0x7e] = valid_extensions;
new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
if (!new)
goto out;
block = new;
}
return (struct edid *)block;
carp:
if (print_bad_edid) {
dev_warn(connector->dev->dev, "%s: EDID block %d invalid.\n",
connector->name, j);
}
connector->bad_edid_counter++;
out:
kfree(block);
return NULL;
}
EXPORT_SYMBOL_GPL(drm_do_get_edid);
/**
* drm_probe_ddc() - probe DDC presence
* @adapter: I2C adapter to probe
*
* Return: True on success, false on failure.
*/
bool
drm_probe_ddc(struct i2c_adapter *adapter)
{
unsigned char out;
return (drm_do_probe_ddc_edid(adapter, &out, 0, 1) == 0);
}
EXPORT_SYMBOL(drm_probe_ddc);
/**
* drm_get_edid - get EDID data, if available
* @connector: connector we're probing
* @adapter: I2C adapter to use for DDC
*
* Poke the given I2C channel to grab EDID data if possible. If found,
* attach it to the connector.
*
* Return: Pointer to valid EDID or NULL if we couldn't find any.
*/
struct edid *drm_get_edid(struct drm_connector *connector,
struct i2c_adapter *adapter)
{
struct edid *edid;
if (!drm_probe_ddc(adapter))
return NULL;
edid = drm_do_get_edid(connector, drm_do_probe_ddc_edid, adapter);
if (edid)
drm_get_displayid(connector, edid);
return edid;
}
EXPORT_SYMBOL(drm_get_edid);
/**
* drm_edid_duplicate - duplicate an EDID and the extensions
* @edid: EDID to duplicate
*
* Return: Pointer to duplicated EDID or NULL on allocation failure.
*/
struct edid *drm_edid_duplicate(const struct edid *edid)
{
return kmemdup(edid, (edid->extensions + 1) * EDID_LENGTH, GFP_KERNEL);
}
EXPORT_SYMBOL(drm_edid_duplicate);
/*** EDID parsing ***/
/**
* edid_vendor - match a string against EDID's obfuscated vendor field
* @edid: EDID to match
* @vendor: vendor string
*
* Returns true if @vendor is in @edid, false otherwise
*/
static bool edid_vendor(struct edid *edid, char *vendor)
{
char edid_vendor[3];
edid_vendor[0] = ((edid->mfg_id[0] & 0x7c) >> 2) + '@';
edid_vendor[1] = (((edid->mfg_id[0] & 0x3) << 3) |
((edid->mfg_id[1] & 0xe0) >> 5)) + '@';
edid_vendor[2] = (edid->mfg_id[1] & 0x1f) + '@';
return !strncmp(edid_vendor, vendor, 3);
}
/**
* edid_get_quirks - return quirk flags for a given EDID
* @edid: EDID to process
*
* This tells subsequent routines what fixes they need to apply.
*/
static u32 edid_get_quirks(struct edid *edid)
{
struct edid_quirk *quirk;
int i;
for (i = 0; i < ARRAY_SIZE(edid_quirk_list); i++) {
quirk = &edid_quirk_list[i];
if (edid_vendor(edid, quirk->vendor) &&
(EDID_PRODUCT_ID(edid) == quirk->product_id))
return quirk->quirks;
}
return 0;
}
#define MODE_SIZE(m) ((m)->hdisplay * (m)->vdisplay)
#define MODE_REFRESH_DIFF(c,t) (abs((c) - (t)))
/**
* edid_fixup_preferred - set preferred modes based on quirk list
* @connector: has mode list to fix up
* @quirks: quirks list
*
* Walk the mode list for @connector, clearing the preferred status
* on existing modes and setting it anew for the right mode ala @quirks.
*/
static void edid_fixup_preferred(struct drm_connector *connector,
u32 quirks)
{
struct drm_display_mode *t, *cur_mode, *preferred_mode;
int target_refresh = 0;
int cur_vrefresh, preferred_vrefresh;
if (list_empty(&connector->probed_modes))
return;
if (quirks & EDID_QUIRK_PREFER_LARGE_60)
target_refresh = 60;
if (quirks & EDID_QUIRK_PREFER_LARGE_75)
target_refresh = 75;
preferred_mode = list_first_entry(&connector->probed_modes,
struct drm_display_mode, head);
list_for_each_entry_safe(cur_mode, t, &connector->probed_modes, head) {
cur_mode->type &= ~DRM_MODE_TYPE_PREFERRED;
if (cur_mode == preferred_mode)
continue;
/* Largest mode is preferred */
if (MODE_SIZE(cur_mode) > MODE_SIZE(preferred_mode))
preferred_mode = cur_mode;
cur_vrefresh = cur_mode->vrefresh ?
cur_mode->vrefresh : drm_mode_vrefresh(cur_mode);
preferred_vrefresh = preferred_mode->vrefresh ?
preferred_mode->vrefresh : drm_mode_vrefresh(preferred_mode);
/* At a given size, try to get closest to target refresh */
if ((MODE_SIZE(cur_mode) == MODE_SIZE(preferred_mode)) &&
MODE_REFRESH_DIFF(cur_vrefresh, target_refresh) <
MODE_REFRESH_DIFF(preferred_vrefresh, target_refresh)) {
preferred_mode = cur_mode;
}
}
preferred_mode->type |= DRM_MODE_TYPE_PREFERRED;
}
static bool
mode_is_rb(const struct drm_display_mode *mode)
{
return (mode->htotal - mode->hdisplay == 160) &&
(mode->hsync_end - mode->hdisplay == 80) &&
(mode->hsync_end - mode->hsync_start == 32) &&
(mode->vsync_start - mode->vdisplay == 3);
}
/*
* drm_mode_find_dmt - Create a copy of a mode if present in DMT
* @dev: Device to duplicate against
* @hsize: Mode width
* @vsize: Mode height
* @fresh: Mode refresh rate
* @rb: Mode reduced-blanking-ness
*
* Walk the DMT mode list looking for a match for the given parameters.
*
* Return: A newly allocated copy of the mode, or NULL if not found.
*/
struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
int hsize, int vsize, int fresh,
bool rb)
{
int i;
for (i = 0; i < ARRAY_SIZE(drm_dmt_modes); i++) {
const struct drm_display_mode *ptr = &drm_dmt_modes[i];
if (hsize != ptr->hdisplay)
continue;
if (vsize != ptr->vdisplay)
continue;
if (fresh != drm_mode_vrefresh(ptr))
continue;
if (rb != mode_is_rb(ptr))
continue;
return drm_mode_duplicate(dev, ptr);
}
return NULL;
}
EXPORT_SYMBOL(drm_mode_find_dmt);
typedef void detailed_cb(struct detailed_timing *timing, void *closure);
static void
cea_for_each_detailed_block(u8 *ext, detailed_cb *cb, void *closure)
{
int i, n = 0;
u8 d = ext[0x02];
u8 *det_base = ext + d;
n = (127 - d) / 18;
for (i = 0; i < n; i++)
cb((struct detailed_timing *)(det_base + 18 * i), closure);
}
static void
vtb_for_each_detailed_block(u8 *ext, detailed_cb *cb, void *closure)
{
unsigned int i, n = min((int)ext[0x02], 6);
u8 *det_base = ext + 5;
if (ext[0x01] != 1)
return; /* unknown version */
for (i = 0; i < n; i++)
cb((struct detailed_timing *)(det_base + 18 * i), closure);
}
static void
drm_for_each_detailed_block(u8 *raw_edid, detailed_cb *cb, void *closure)
{
int i;
struct edid *edid = (struct edid *)raw_edid;
if (edid == NULL)
return;
for (i = 0; i < EDID_DETAILED_TIMINGS; i++)
cb(&(edid->detailed_timings[i]), closure);
for (i = 1; i <= raw_edid[0x7e]; i++) {
u8 *ext = raw_edid + (i * EDID_LENGTH);
switch (*ext) {
case CEA_EXT:
cea_for_each_detailed_block(ext, cb, closure);
break;
case VTB_EXT:
vtb_for_each_detailed_block(ext, cb, closure);
break;
default:
break;
}
}
}
static void
is_rb(struct detailed_timing *t, void *data)
{
u8 *r = (u8 *)t;
if (r[3] == EDID_DETAIL_MONITOR_RANGE)
if (r[15] & 0x10)
*(bool *)data = true;
}
/* EDID 1.4 defines this explicitly. For EDID 1.3, we guess, badly. */
static bool
drm_monitor_supports_rb(struct edid *edid)
{
if (edid->revision >= 4) {
bool ret = false;
drm_for_each_detailed_block((u8 *)edid, is_rb, &ret);
return ret;
}
return ((edid->input & DRM_EDID_INPUT_DIGITAL) != 0);
}
static void
find_gtf2(struct detailed_timing *t, void *data)
{
u8 *r = (u8 *)t;
if (r[3] == EDID_DETAIL_MONITOR_RANGE && r[10] == 0x02)
*(u8 **)data = r;
}
/* Secondary GTF curve kicks in above some break frequency */
static int
drm_gtf2_hbreak(struct edid *edid)
{
u8 *r = NULL;
drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
return r ? (r[12] * 2) : 0;
}
static int
drm_gtf2_2c(struct edid *edid)
{
u8 *r = NULL;
drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
return r ? r[13] : 0;
}
static int
drm_gtf2_m(struct edid *edid)
{
u8 *r = NULL;
drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
return r ? (r[15] << 8) + r[14] : 0;
}
static int
drm_gtf2_k(struct edid *edid)
{
u8 *r = NULL;
drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
return r ? r[16] : 0;
}
static int
drm_gtf2_2j(struct edid *edid)
{
u8 *r = NULL;
drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
return r ? r[17] : 0;
}
/**
* standard_timing_level - get std. timing level(CVT/GTF/DMT)
* @edid: EDID block to scan
*/
static int standard_timing_level(struct edid *edid)
{
if (edid->revision >= 2) {
if (edid->revision >= 4 && (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF))
return LEVEL_CVT;
if (drm_gtf2_hbreak(edid))
return LEVEL_GTF2;
return LEVEL_GTF;
}
return LEVEL_DMT;
}
/*
* 0 is reserved. The spec says 0x01 fill for unused timings. Some old
* monitors fill with ascii space (0x20) instead.
*/
static int
bad_std_timing(u8 a, u8 b)
{
return (a == 0x00 && b == 0x00) ||
(a == 0x01 && b == 0x01) ||
(a == 0x20 && b == 0x20);
}
/**
* drm_mode_std - convert standard mode info (width, height, refresh) into mode
* @connector: connector of for the EDID block
* @edid: EDID block to scan
* @t: standard timing params
*
* Take the standard timing params (in this case width, aspect, and refresh)
* and convert them into a real mode using CVT/GTF/DMT.
*/
static struct drm_display_mode *
drm_mode_std(struct drm_connector *connector, struct edid *edid,
struct std_timing *t)
{
struct drm_device *dev = connector->dev;
struct drm_display_mode *m, *mode = NULL;
int hsize, vsize;
int vrefresh_rate;
unsigned aspect_ratio = (t->vfreq_aspect & EDID_TIMING_ASPECT_MASK)
>> EDID_TIMING_ASPECT_SHIFT;
unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK)
>> EDID_TIMING_VFREQ_SHIFT;
int timing_level = standard_timing_level(edid);
if (bad_std_timing(t->hsize, t->vfreq_aspect))
return NULL;
/* According to the EDID spec, the hdisplay = hsize * 8 + 248 */
hsize = t->hsize * 8 + 248;
/* vrefresh_rate = vfreq + 60 */
vrefresh_rate = vfreq + 60;
/* the vdisplay is calculated based on the aspect ratio */
if (aspect_ratio == 0) {
if (edid->revision < 3)
vsize = hsize;
else
vsize = (hsize * 10) / 16;
} else if (aspect_ratio == 1)
vsize = (hsize * 3) / 4;
else if (aspect_ratio == 2)
vsize = (hsize * 4) / 5;
else
vsize = (hsize * 9) / 16;
/* HDTV hack, part 1 */
if (vrefresh_rate == 60 &&
((hsize == 1360 && vsize == 765) ||
(hsize == 1368 && vsize == 769))) {
hsize = 1366;
vsize = 768;
}
/*
* If this connector already has a mode for this size and refresh
* rate (because it came from detailed or CVT info), use that
* instead. This way we don't have to guess at interlace or
* reduced blanking.
*/
list_for_each_entry(m, &connector->probed_modes, head)
if (m->hdisplay == hsize && m->vdisplay == vsize &&
drm_mode_vrefresh(m) == vrefresh_rate)
return NULL;
/* HDTV hack, part 2 */
if (hsize == 1366 && vsize == 768 && vrefresh_rate == 60) {
mode = drm_cvt_mode(dev, 1366, 768, vrefresh_rate, 0, 0,
false);
mode->hdisplay = 1366;
mode->hsync_start = mode->hsync_start - 1;
mode->hsync_end = mode->hsync_end - 1;
return mode;
}
/* check whether it can be found in default mode table */
if (drm_monitor_supports_rb(edid)) {
mode = drm_mode_find_dmt(dev, hsize, vsize, vrefresh_rate,
true);
if (mode)
return mode;
}
mode = drm_mode_find_dmt(dev, hsize, vsize, vrefresh_rate, false);
if (mode)
return mode;
/* okay, generate it */
switch (timing_level) {
case LEVEL_DMT:
break;
case LEVEL_GTF:
mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
break;
case LEVEL_GTF2:
/*
* This is potentially wrong if there's ever a monitor with
* more than one ranges section, each claiming a different
* secondary GTF curve. Please don't do that.
*/
mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
if (!mode)
return NULL;
if (drm_mode_hsync(mode) > drm_gtf2_hbreak(edid)) {
drm_mode_destroy(dev, mode);
mode = drm_gtf_mode_complex(dev, hsize, vsize,
vrefresh_rate, 0, 0,
drm_gtf2_m(edid),
drm_gtf2_2c(edid),
drm_gtf2_k(edid),
drm_gtf2_2j(edid));
}
break;
case LEVEL_CVT:
mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
false);
break;
}
return mode;
}
/*
* EDID is delightfully ambiguous about how interlaced modes are to be
* encoded. Our internal representation is of frame height, but some
* HDTV detailed timings are encoded as field height.
*
* The format list here is from CEA, in frame size. Technically we
* should be checking refresh rate too. Whatever.
*/
static void
drm_mode_do_interlace_quirk(struct drm_display_mode *mode,
struct detailed_pixel_timing *pt)
{
int i;
static const struct {
int w, h;
} cea_interlaced[] = {
{ 1920, 1080 },
{ 720, 480 },
{ 1440, 480 },
{ 2880, 480 },
{ 720, 576 },
{ 1440, 576 },
{ 2880, 576 },
};
if (!(pt->misc & DRM_EDID_PT_INTERLACED))
return;
for (i = 0; i < ARRAY_SIZE(cea_interlaced); i++) {
if ((mode->hdisplay == cea_interlaced[i].w) &&
(mode->vdisplay == cea_interlaced[i].h / 2)) {
mode->vdisplay *= 2;
mode->vsync_start *= 2;
mode->vsync_end *= 2;
mode->vtotal *= 2;
mode->vtotal |= 1;
}
}
mode->flags |= DRM_MODE_FLAG_INTERLACE;
}
/**
* drm_mode_detailed - create a new mode from an EDID detailed timing section
* @dev: DRM device (needed to create new mode)
* @edid: EDID block
* @timing: EDID detailed timing info
* @quirks: quirks to apply
*
* An EDID detailed timing block contains enough info for us to create and
* return a new struct drm_display_mode.
*/
static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
struct edid *edid,
struct detailed_timing *timing,
u32 quirks)
{
struct drm_display_mode *mode;
struct detailed_pixel_timing *pt = &timing->data.pixel_data;
unsigned hactive = (pt->hactive_hblank_hi & 0xf0) << 4 | pt->hactive_lo;
unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo;
unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo;
unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo;
unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo;
unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 2 | pt->vsync_offset_pulse_width_lo >> 4;
unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf);
/* ignore tiny modes */
if (hactive < 64 || vactive < 64)
return NULL;
if (pt->misc & DRM_EDID_PT_STEREO) {
DRM_DEBUG_KMS("stereo mode not supported\n");
return NULL;
}
if (!(pt->misc & DRM_EDID_PT_SEPARATE_SYNC)) {
DRM_DEBUG_KMS("composite sync not supported\n");
}
/* it is incorrect if hsync/vsync width is zero */
if (!hsync_pulse_width || !vsync_pulse_width) {
DRM_DEBUG_KMS("Incorrect Detailed timing. "
"Wrong Hsync/Vsync pulse width\n");
return NULL;
}
if (quirks & EDID_QUIRK_FORCE_REDUCED_BLANKING) {
mode = drm_cvt_mode(dev, hactive, vactive, 60, true, false, false);
if (!mode)
return NULL;
goto set_size;
}
mode = drm_mode_create(dev);
if (!mode)
return NULL;
if (quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH)
timing->pixel_clock = cpu_to_le16(1088);
mode->clock = le16_to_cpu(timing->pixel_clock) * 10;
mode->hdisplay = hactive;
mode->hsync_start = mode->hdisplay + hsync_offset;
mode->hsync_end = mode->hsync_start + hsync_pulse_width;
mode->htotal = mode->hdisplay + hblank;
mode->vdisplay = vactive;
mode->vsync_start = mode->vdisplay + vsync_offset;
mode->vsync_end = mode->vsync_start + vsync_pulse_width;
mode->vtotal = mode->vdisplay + vblank;
/* Some EDIDs have bogus h/vtotal values */
if (mode->hsync_end > mode->htotal)
mode->htotal = mode->hsync_end + 1;
if (mode->vsync_end > mode->vtotal)
mode->vtotal = mode->vsync_end + 1;
drm_mode_do_interlace_quirk(mode, pt);
if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE;
}
mode->flags |= (pt->misc & DRM_EDID_PT_HSYNC_POSITIVE) ?
DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC;
mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ?
DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
set_size:
mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
mode->width_mm *= 10;
mode->height_mm *= 10;
}
if (quirks & EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE) {
mode->width_mm = edid->width_cm * 10;
mode->height_mm = edid->height_cm * 10;
}
mode->type = DRM_MODE_TYPE_DRIVER;
mode->vrefresh = drm_mode_vrefresh(mode);
drm_mode_set_name(mode);
return mode;
}
static bool
mode_in_hsync_range(const struct drm_display_mode *mode,
struct edid *edid, u8 *t)
{
int hsync, hmin, hmax;
hmin = t[7];
if (edid->revision >= 4)
hmin += ((t[4] & 0x04) ? 255 : 0);
hmax = t[8];
if (edid->revision >= 4)
hmax += ((t[4] & 0x08) ? 255 : 0);
hsync = drm_mode_hsync(mode);
return (hsync <= hmax && hsync >= hmin);
}
static bool
mode_in_vsync_range(const struct drm_display_mode *mode,
struct edid *edid, u8 *t)
{
int vsync, vmin, vmax;
vmin = t[5];
if (edid->revision >= 4)
vmin += ((t[4] & 0x01) ? 255 : 0);
vmax = t[6];
if (edid->revision >= 4)
vmax += ((t[4] & 0x02) ? 255 : 0);
vsync = drm_mode_vrefresh(mode);
return (vsync <= vmax && vsync >= vmin);
}
static u32
range_pixel_clock(struct edid *edid, u8 *t)
{
/* unspecified */
if (t[9] == 0 || t[9] == 255)
return 0;
/* 1.4 with CVT support gives us real precision, yay */
if (edid->revision >= 4 && t[10] == 0x04)
return (t[9] * 10000) - ((t[12] >> 2) * 250);
/* 1.3 is pathetic, so fuzz up a bit */
return t[9] * 10000 + 5001;
}
static bool
mode_in_range(const struct drm_display_mode *mode, struct edid *edid,
struct detailed_timing *timing)
{
u32 max_clock;
u8 *t = (u8 *)timing;
if (!mode_in_hsync_range(mode, edid, t))
return false;
if (!mode_in_vsync_range(mode, edid, t))
return false;
if ((max_clock = range_pixel_clock(edid, t)))
if (mode->clock > max_clock)
return false;
/* 1.4 max horizontal check */
if (edid->revision >= 4 && t[10] == 0x04)
if (t[13] && mode->hdisplay > 8 * (t[13] + (256 * (t[12]&0x3))))
return false;
if (mode_is_rb(mode) && !drm_monitor_supports_rb(edid))
return false;
return true;
}
static bool valid_inferred_mode(const struct drm_connector *connector,
const struct drm_display_mode *mode)
{
const struct drm_display_mode *m;
bool ok = false;
list_for_each_entry(m, &connector->probed_modes, head) {
if (mode->hdisplay == m->hdisplay &&
mode->vdisplay == m->vdisplay &&
drm_mode_vrefresh(mode) == drm_mode_vrefresh(m))
return false; /* duplicated */
if (mode->hdisplay <= m->hdisplay &&
mode->vdisplay <= m->vdisplay)
ok = true;
}
return ok;
}
static int
drm_dmt_modes_for_range(struct drm_connector *connector, struct edid *edid,
struct detailed_timing *timing)
{
int i, modes = 0;
struct drm_display_mode *newmode;
struct drm_device *dev = connector->dev;
for (i = 0; i < ARRAY_SIZE(drm_dmt_modes); i++) {
if (mode_in_range(drm_dmt_modes + i, edid, timing) &&
valid_inferred_mode(connector, drm_dmt_modes + i)) {
newmode = drm_mode_duplicate(dev, &drm_dmt_modes[i]);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
}
}
}
return modes;
}
/* fix up 1366x768 mode from 1368x768;
* GFT/CVT can't express 1366 width which isn't dividable by 8
*/
static void fixup_mode_1366x768(struct drm_display_mode *mode)
{
if (mode->hdisplay == 1368 && mode->vdisplay == 768) {
mode->hdisplay = 1366;
mode->hsync_start--;
mode->hsync_end--;
drm_mode_set_name(mode);
}
}
static int
drm_gtf_modes_for_range(struct drm_connector *connector, struct edid *edid,
struct detailed_timing *timing)
{
int i, modes = 0;
struct drm_display_mode *newmode;
struct drm_device *dev = connector->dev;
for (i = 0; i < ARRAY_SIZE(extra_modes); i++) {
const struct minimode *m = &extra_modes[i];
newmode = drm_gtf_mode(dev, m->w, m->h, m->r, 0, 0);
if (!newmode)
return modes;
fixup_mode_1366x768(newmode);
if (!mode_in_range(newmode, edid, timing) ||
!valid_inferred_mode(connector, newmode)) {
drm_mode_destroy(dev, newmode);
continue;
}
drm_mode_probed_add(connector, newmode);
modes++;
}
return modes;
}
static int
drm_cvt_modes_for_range(struct drm_connector *connector, struct edid *edid,
struct detailed_timing *timing)
{
int i, modes = 0;
struct drm_display_mode *newmode;
struct drm_device *dev = connector->dev;
bool rb = drm_monitor_supports_rb(edid);
for (i = 0; i < ARRAY_SIZE(extra_modes); i++) {
const struct minimode *m = &extra_modes[i];
newmode = drm_cvt_mode(dev, m->w, m->h, m->r, rb, 0, 0);
if (!newmode)
return modes;
fixup_mode_1366x768(newmode);
if (!mode_in_range(newmode, edid, timing) ||
!valid_inferred_mode(connector, newmode)) {
drm_mode_destroy(dev, newmode);
continue;
}
drm_mode_probed_add(connector, newmode);
modes++;
}
return modes;
}
static void
do_inferred_modes(struct detailed_timing *timing, void *c)
{
struct detailed_mode_closure *closure = c;
struct detailed_non_pixel *data = &timing->data.other_data;
struct detailed_data_monitor_range *range = &data->data.range;
if (data->type != EDID_DETAIL_MONITOR_RANGE)
return;
closure->modes += drm_dmt_modes_for_range(closure->connector,
closure->edid,
timing);
if (!version_greater(closure->edid, 1, 1))
return; /* GTF not defined yet */
switch (range->flags) {
case 0x02: /* secondary gtf, XXX could do more */
case 0x00: /* default gtf */
closure->modes += drm_gtf_modes_for_range(closure->connector,
closure->edid,
timing);
break;
case 0x04: /* cvt, only in 1.4+ */
if (!version_greater(closure->edid, 1, 3))
break;
closure->modes += drm_cvt_modes_for_range(closure->connector,
closure->edid,
timing);
break;
case 0x01: /* just the ranges, no formula */
default:
break;
}
}
static int
add_inferred_modes(struct drm_connector *connector, struct edid *edid)
{
struct detailed_mode_closure closure = {
.connector = connector,
.edid = edid,
};
if (version_greater(edid, 1, 0))
drm_for_each_detailed_block((u8 *)edid, do_inferred_modes,
&closure);
return closure.modes;
}
static int
drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing)
{
int i, j, m, modes = 0;
struct drm_display_mode *mode;
u8 *est = ((u8 *)timing) + 5;
for (i = 0; i < 6; i++) {
for (j = 7; j >= 0; j--) {
m = (i * 8) + (7 - j);
if (m >= ARRAY_SIZE(est3_modes))
break;
if (est[i] & (1 << j)) {
mode = drm_mode_find_dmt(connector->dev,
est3_modes[m].w,
est3_modes[m].h,
est3_modes[m].r,
est3_modes[m].rb);
if (mode) {
drm_mode_probed_add(connector, mode);
modes++;
}
}
}
}
return modes;
}
static void
do_established_modes(struct detailed_timing *timing, void *c)
{
struct detailed_mode_closure *closure = c;
struct detailed_non_pixel *data = &timing->data.other_data;
if (data->type == EDID_DETAIL_EST_TIMINGS)
closure->modes += drm_est3_modes(closure->connector, timing);
}
/**
* add_established_modes - get est. modes from EDID and add them
* @connector: connector to add mode(s) to
* @edid: EDID block to scan
*
* Each EDID block contains a bitmap of the supported "established modes" list
* (defined above). Tease them out and add them to the global modes list.
*/
static int
add_established_modes(struct drm_connector *connector, struct edid *edid)
{
struct drm_device *dev = connector->dev;
unsigned long est_bits = edid->established_timings.t1 |
(edid->established_timings.t2 << 8) |
((edid->established_timings.mfg_rsvd & 0x80) << 9);
int i, modes = 0;
struct detailed_mode_closure closure = {
.connector = connector,
.edid = edid,
};
for (i = 0; i <= EDID_EST_TIMINGS; i++) {
if (est_bits & (1<<i)) {
struct drm_display_mode *newmode;
newmode = drm_mode_duplicate(dev, &edid_est_modes[i]);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
}
}
}
if (version_greater(edid, 1, 0))
drm_for_each_detailed_block((u8 *)edid,
do_established_modes, &closure);
return modes + closure.modes;
}
static void
do_standard_modes(struct detailed_timing *timing, void *c)
{
struct detailed_mode_closure *closure = c;
struct detailed_non_pixel *data = &timing->data.other_data;
struct drm_connector *connector = closure->connector;
struct edid *edid = closure->edid;
if (data->type == EDID_DETAIL_STD_MODES) {
int i;
for (i = 0; i < 6; i++) {
struct std_timing *std;
struct drm_display_mode *newmode;
std = &data->data.timings[i];
newmode = drm_mode_std(connector, edid, std);
if (newmode) {
drm_mode_probed_add(connector, newmode);
closure->modes++;
}
}
}
}
/**
* add_standard_modes - get std. modes from EDID and add them
* @connector: connector to add mode(s) to
* @edid: EDID block to scan
*
* Standard modes can be calculated using the appropriate standard (DMT,
* GTF or CVT. Grab them from @edid and add them to the list.
*/
static int
add_standard_modes(struct drm_connector *connector, struct edid *edid)
{
int i, modes = 0;
struct detailed_mode_closure closure = {
.connector = connector,
.edid = edid,
};
for (i = 0; i < EDID_STD_TIMINGS; i++) {
struct drm_display_mode *newmode;
newmode = drm_mode_std(connector, edid,
&edid->standard_timings[i]);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
}
}
if (version_greater(edid, 1, 0))
drm_for_each_detailed_block((u8 *)edid, do_standard_modes,
&closure);
/* XXX should also look for standard codes in VTB blocks */
return modes + closure.modes;
}
static int drm_cvt_modes(struct drm_connector *connector,
struct detailed_timing *timing)
{
int i, j, modes = 0;
struct drm_display_mode *newmode;
struct drm_device *dev = connector->dev;
struct cvt_timing *cvt;
const int rates[] = { 60, 85, 75, 60, 50 };
const u8 empty[3] = { 0, 0, 0 };
for (i = 0; i < 4; i++) {
int uninitialized_var(width), height;
cvt = &(timing->data.other_data.data.cvt[i]);
if (!memcmp(cvt->code, empty, 3))
continue;
height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 4) + 1) * 2;
switch (cvt->code[1] & 0x0c) {
case 0x00:
width = height * 4 / 3;
break;
case 0x04:
width = height * 16 / 9;
break;
case 0x08:
width = height * 16 / 10;
break;
case 0x0c:
width = height * 15 / 9;
break;
}
for (j = 1; j < 5; j++) {
if (cvt->code[2] & (1 << j)) {
newmode = drm_cvt_mode(dev, width, height,
rates[j], j == 0,
false, false);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
}
}
}
}
return modes;
}
static void
do_cvt_mode(struct detailed_timing *timing, void *c)
{
struct detailed_mode_closure *closure = c;
struct detailed_non_pixel *data = &timing->data.other_data;
if (data->type == EDID_DETAIL_CVT_3BYTE)
closure->modes += drm_cvt_modes(closure->connector, timing);
}
static int
add_cvt_modes(struct drm_connector *connector, struct edid *edid)
{
struct detailed_mode_closure closure = {
.connector = connector,
.edid = edid,
};
if (version_greater(edid, 1, 2))
drm_for_each_detailed_block((u8 *)edid, do_cvt_mode, &closure);
/* XXX should also look for CVT codes in VTB blocks */
return closure.modes;
}
static void fixup_detailed_cea_mode_clock(struct drm_display_mode *mode);
static void
do_detailed_mode(struct detailed_timing *timing, void *c)
{
struct detailed_mode_closure *closure = c;
struct drm_display_mode *newmode;
if (timing->pixel_clock) {
newmode = drm_mode_detailed(closure->connector->dev,
closure->edid, timing,
closure->quirks);
if (!newmode)
return;
if (closure->preferred)
newmode->type |= DRM_MODE_TYPE_PREFERRED;
/*
* Detailed modes are limited to 10kHz pixel clock resolution,
* so fix up anything that looks like CEA/HDMI mode, but the clock
* is just slightly off.
*/
fixup_detailed_cea_mode_clock(newmode);
drm_mode_probed_add(closure->connector, newmode);
closure->modes++;
closure->preferred = 0;
}
}
/*
* add_detailed_modes - Add modes from detailed timings
* @connector: attached connector
* @edid: EDID block to scan
* @quirks: quirks to apply
*/
static int
add_detailed_modes(struct drm_connector *connector, struct edid *edid,
u32 quirks)
{
struct detailed_mode_closure closure = {
.connector = connector,
.edid = edid,
.preferred = 1,
.quirks = quirks,
};
if (closure.preferred && !version_greater(edid, 1, 3))
closure.preferred =
(edid->features & DRM_EDID_FEATURE_PREFERRED_TIMING);
drm_for_each_detailed_block((u8 *)edid, do_detailed_mode, &closure);
return closure.modes;
}
#define AUDIO_BLOCK 0x01
drm/edid: support CEA video modes. TFT/plasma televisions and projectors have become commonplace, and so has the use of PCs to drive them. Add the video modes specified by an EDID's CEA extension to the mode database for a connector. Before: [ 1.158869] [drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.158875] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.158882] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 After: [ 1.144175] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.144179] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.144187] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.144190] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.144192] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 1.144195] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.144198] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.144201] [drm:drm_mode_debug_printmodeline], Modeline 27:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.144203] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.144206] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa Signed-off-by: Christian Schmidt <schmidt@digadd.de> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19 22:53:16 +08:00
#define VIDEO_BLOCK 0x02
#define VENDOR_BLOCK 0x03
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
#define SPEAKER_BLOCK 0x04
#define VIDEO_CAPABILITY_BLOCK 0x07
#define EDID_BASIC_AUDIO (1 << 6)
#define EDID_CEA_YCRCB444 (1 << 5)
#define EDID_CEA_YCRCB422 (1 << 4)
#define EDID_CEA_VCDB_QS (1 << 6)
/*
* Search EDID for CEA extension block.
*/
static u8 *drm_find_edid_extension(struct edid *edid, int ext_id)
{
u8 *edid_ext = NULL;
int i;
/* No EDID or EDID extensions */
if (edid == NULL || edid->extensions == 0)
return NULL;
/* Find CEA extension */
for (i = 0; i < edid->extensions; i++) {
edid_ext = (u8 *)edid + EDID_LENGTH * (i + 1);
if (edid_ext[0] == ext_id)
break;
}
if (i == edid->extensions)
return NULL;
return edid_ext;
}
static u8 *drm_find_cea_extension(struct edid *edid)
{
return drm_find_edid_extension(edid, CEA_EXT);
}
static u8 *drm_find_displayid_extension(struct edid *edid)
{
return drm_find_edid_extension(edid, DISPLAYID_EXT);
}
/*
* Calculate the alternate clock for the CEA mode
* (60Hz vs. 59.94Hz etc.)
*/
static unsigned int
cea_mode_alternate_clock(const struct drm_display_mode *cea_mode)
{
unsigned int clock = cea_mode->clock;
if (cea_mode->vrefresh % 6 != 0)
return clock;
/*
* edid_cea_modes contains the 59.94Hz
* variant for 240 and 480 line modes,
* and the 60Hz variant otherwise.
*/
if (cea_mode->vdisplay == 240 || cea_mode->vdisplay == 480)
clock = DIV_ROUND_CLOSEST(clock * 1001, 1000);
else
clock = DIV_ROUND_CLOSEST(clock * 1000, 1001);
return clock;
}
drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz clock difference Rather than using drm_match_cea_mode() to see if the EDID detailed timings are supposed to represent one of the CEA/HDMI modes, add a special version of that function that takes in an explicit clock tolerance value (in kHz). When looking at the detailed timings specify the tolerance as 5kHz due to the 10kHz clock resolution limit inherent in detailed timings. drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks, which only allows smaller errors for lower clocks (eg. for 25200 it won't allow any error) and a bigger error for higher clocks (eg. for 297000 it actually matches 296913-297000). So it doesn't really match what we want for the fixup. Using the explicit +-5kHz is much better for this use case. Not sure if we should change the normal mode matching to also use something else besides KHZ2PICOS() since it allows a different proportion of error depending on the clock. I believe VESA CVT allows a maximum deviation of .5%, so using that for normal mode matching might be a good idea? Cc: Adam Jackson <ajax@redhat.com> Tested-by: nathan.d.ciobanu@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217 Fixes: fa3a7340eaa1 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-17 03:05:12 +08:00
static u8 drm_match_cea_mode_clock_tolerance(const struct drm_display_mode *to_match,
unsigned int clock_tolerance)
{
u8 vic;
drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz clock difference Rather than using drm_match_cea_mode() to see if the EDID detailed timings are supposed to represent one of the CEA/HDMI modes, add a special version of that function that takes in an explicit clock tolerance value (in kHz). When looking at the detailed timings specify the tolerance as 5kHz due to the 10kHz clock resolution limit inherent in detailed timings. drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks, which only allows smaller errors for lower clocks (eg. for 25200 it won't allow any error) and a bigger error for higher clocks (eg. for 297000 it actually matches 296913-297000). So it doesn't really match what we want for the fixup. Using the explicit +-5kHz is much better for this use case. Not sure if we should change the normal mode matching to also use something else besides KHZ2PICOS() since it allows a different proportion of error depending on the clock. I believe VESA CVT allows a maximum deviation of .5%, so using that for normal mode matching might be a good idea? Cc: Adam Jackson <ajax@redhat.com> Tested-by: nathan.d.ciobanu@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217 Fixes: fa3a7340eaa1 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-17 03:05:12 +08:00
if (!to_match->clock)
return 0;
for (vic = 1; vic < ARRAY_SIZE(edid_cea_modes); vic++) {
const struct drm_display_mode *cea_mode = &edid_cea_modes[vic];
drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz clock difference Rather than using drm_match_cea_mode() to see if the EDID detailed timings are supposed to represent one of the CEA/HDMI modes, add a special version of that function that takes in an explicit clock tolerance value (in kHz). When looking at the detailed timings specify the tolerance as 5kHz due to the 10kHz clock resolution limit inherent in detailed timings. drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks, which only allows smaller errors for lower clocks (eg. for 25200 it won't allow any error) and a bigger error for higher clocks (eg. for 297000 it actually matches 296913-297000). So it doesn't really match what we want for the fixup. Using the explicit +-5kHz is much better for this use case. Not sure if we should change the normal mode matching to also use something else besides KHZ2PICOS() since it allows a different proportion of error depending on the clock. I believe VESA CVT allows a maximum deviation of .5%, so using that for normal mode matching might be a good idea? Cc: Adam Jackson <ajax@redhat.com> Tested-by: nathan.d.ciobanu@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217 Fixes: fa3a7340eaa1 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-17 03:05:12 +08:00
unsigned int clock1, clock2;
/* Check both 60Hz and 59.94Hz */
clock1 = cea_mode->clock;
clock2 = cea_mode_alternate_clock(cea_mode);
if (abs(to_match->clock - clock1) > clock_tolerance &&
abs(to_match->clock - clock2) > clock_tolerance)
continue;
if (drm_mode_equal_no_clocks(to_match, cea_mode))
return vic;
drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz clock difference Rather than using drm_match_cea_mode() to see if the EDID detailed timings are supposed to represent one of the CEA/HDMI modes, add a special version of that function that takes in an explicit clock tolerance value (in kHz). When looking at the detailed timings specify the tolerance as 5kHz due to the 10kHz clock resolution limit inherent in detailed timings. drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks, which only allows smaller errors for lower clocks (eg. for 25200 it won't allow any error) and a bigger error for higher clocks (eg. for 297000 it actually matches 296913-297000). So it doesn't really match what we want for the fixup. Using the explicit +-5kHz is much better for this use case. Not sure if we should change the normal mode matching to also use something else besides KHZ2PICOS() since it allows a different proportion of error depending on the clock. I believe VESA CVT allows a maximum deviation of .5%, so using that for normal mode matching might be a good idea? Cc: Adam Jackson <ajax@redhat.com> Tested-by: nathan.d.ciobanu@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217 Fixes: fa3a7340eaa1 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-17 03:05:12 +08:00
}
return 0;
}
/**
* drm_match_cea_mode - look for a CEA mode matching given mode
* @to_match: display mode
*
* Return: The CEA Video ID (VIC) of the mode or 0 if it isn't a CEA-861
* mode.
*/
u8 drm_match_cea_mode(const struct drm_display_mode *to_match)
{
u8 vic;
if (!to_match->clock)
return 0;
for (vic = 1; vic < ARRAY_SIZE(edid_cea_modes); vic++) {
const struct drm_display_mode *cea_mode = &edid_cea_modes[vic];
unsigned int clock1, clock2;
/* Check both 60Hz and 59.94Hz */
clock1 = cea_mode->clock;
clock2 = cea_mode_alternate_clock(cea_mode);
if ((KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock1) ||
KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock2)) &&
drm_mode_equal_no_clocks_no_stereo(to_match, cea_mode))
return vic;
}
return 0;
}
EXPORT_SYMBOL(drm_match_cea_mode);
static bool drm_valid_cea_vic(u8 vic)
{
return vic > 0 && vic < ARRAY_SIZE(edid_cea_modes);
}
/**
* drm_get_cea_aspect_ratio - get the picture aspect ratio corresponding to
* the input VIC from the CEA mode list
* @video_code: ID given to each of the CEA modes
*
* Returns picture aspect ratio
*/
enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code)
{
return edid_cea_modes[video_code].picture_aspect_ratio;
}
EXPORT_SYMBOL(drm_get_cea_aspect_ratio);
/*
* Calculate the alternate clock for HDMI modes (those from the HDMI vendor
* specific block).
*
* It's almost like cea_mode_alternate_clock(), we just need to add an
* exception for the VIC 4 mode (4096x2160@24Hz): no alternate clock for this
* one.
*/
static unsigned int
hdmi_mode_alternate_clock(const struct drm_display_mode *hdmi_mode)
{
if (hdmi_mode->vdisplay == 4096 && hdmi_mode->hdisplay == 2160)
return hdmi_mode->clock;
return cea_mode_alternate_clock(hdmi_mode);
}
drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz clock difference Rather than using drm_match_cea_mode() to see if the EDID detailed timings are supposed to represent one of the CEA/HDMI modes, add a special version of that function that takes in an explicit clock tolerance value (in kHz). When looking at the detailed timings specify the tolerance as 5kHz due to the 10kHz clock resolution limit inherent in detailed timings. drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks, which only allows smaller errors for lower clocks (eg. for 25200 it won't allow any error) and a bigger error for higher clocks (eg. for 297000 it actually matches 296913-297000). So it doesn't really match what we want for the fixup. Using the explicit +-5kHz is much better for this use case. Not sure if we should change the normal mode matching to also use something else besides KHZ2PICOS() since it allows a different proportion of error depending on the clock. I believe VESA CVT allows a maximum deviation of .5%, so using that for normal mode matching might be a good idea? Cc: Adam Jackson <ajax@redhat.com> Tested-by: nathan.d.ciobanu@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217 Fixes: fa3a7340eaa1 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-17 03:05:12 +08:00
static u8 drm_match_hdmi_mode_clock_tolerance(const struct drm_display_mode *to_match,
unsigned int clock_tolerance)
{
u8 vic;
drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz clock difference Rather than using drm_match_cea_mode() to see if the EDID detailed timings are supposed to represent one of the CEA/HDMI modes, add a special version of that function that takes in an explicit clock tolerance value (in kHz). When looking at the detailed timings specify the tolerance as 5kHz due to the 10kHz clock resolution limit inherent in detailed timings. drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks, which only allows smaller errors for lower clocks (eg. for 25200 it won't allow any error) and a bigger error for higher clocks (eg. for 297000 it actually matches 296913-297000). So it doesn't really match what we want for the fixup. Using the explicit +-5kHz is much better for this use case. Not sure if we should change the normal mode matching to also use something else besides KHZ2PICOS() since it allows a different proportion of error depending on the clock. I believe VESA CVT allows a maximum deviation of .5%, so using that for normal mode matching might be a good idea? Cc: Adam Jackson <ajax@redhat.com> Tested-by: nathan.d.ciobanu@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217 Fixes: fa3a7340eaa1 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-17 03:05:12 +08:00
if (!to_match->clock)
return 0;
for (vic = 1; vic < ARRAY_SIZE(edid_4k_modes); vic++) {
const struct drm_display_mode *hdmi_mode = &edid_4k_modes[vic];
drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz clock difference Rather than using drm_match_cea_mode() to see if the EDID detailed timings are supposed to represent one of the CEA/HDMI modes, add a special version of that function that takes in an explicit clock tolerance value (in kHz). When looking at the detailed timings specify the tolerance as 5kHz due to the 10kHz clock resolution limit inherent in detailed timings. drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks, which only allows smaller errors for lower clocks (eg. for 25200 it won't allow any error) and a bigger error for higher clocks (eg. for 297000 it actually matches 296913-297000). So it doesn't really match what we want for the fixup. Using the explicit +-5kHz is much better for this use case. Not sure if we should change the normal mode matching to also use something else besides KHZ2PICOS() since it allows a different proportion of error depending on the clock. I believe VESA CVT allows a maximum deviation of .5%, so using that for normal mode matching might be a good idea? Cc: Adam Jackson <ajax@redhat.com> Tested-by: nathan.d.ciobanu@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217 Fixes: fa3a7340eaa1 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-17 03:05:12 +08:00
unsigned int clock1, clock2;
/* Make sure to also match alternate clocks */
clock1 = hdmi_mode->clock;
clock2 = hdmi_mode_alternate_clock(hdmi_mode);
if (abs(to_match->clock - clock1) > clock_tolerance &&
abs(to_match->clock - clock2) > clock_tolerance)
continue;
if (drm_mode_equal_no_clocks(to_match, hdmi_mode))
return vic;
drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz clock difference Rather than using drm_match_cea_mode() to see if the EDID detailed timings are supposed to represent one of the CEA/HDMI modes, add a special version of that function that takes in an explicit clock tolerance value (in kHz). When looking at the detailed timings specify the tolerance as 5kHz due to the 10kHz clock resolution limit inherent in detailed timings. drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks, which only allows smaller errors for lower clocks (eg. for 25200 it won't allow any error) and a bigger error for higher clocks (eg. for 297000 it actually matches 296913-297000). So it doesn't really match what we want for the fixup. Using the explicit +-5kHz is much better for this use case. Not sure if we should change the normal mode matching to also use something else besides KHZ2PICOS() since it allows a different proportion of error depending on the clock. I believe VESA CVT allows a maximum deviation of .5%, so using that for normal mode matching might be a good idea? Cc: Adam Jackson <ajax@redhat.com> Tested-by: nathan.d.ciobanu@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217 Fixes: fa3a7340eaa1 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-17 03:05:12 +08:00
}
return 0;
}
/*
* drm_match_hdmi_mode - look for a HDMI mode matching given mode
* @to_match: display mode
*
* An HDMI mode is one defined in the HDMI vendor specific block.
*
* Returns the HDMI Video ID (VIC) of the mode or 0 if it isn't one.
*/
static u8 drm_match_hdmi_mode(const struct drm_display_mode *to_match)
{
u8 vic;
if (!to_match->clock)
return 0;
for (vic = 1; vic < ARRAY_SIZE(edid_4k_modes); vic++) {
const struct drm_display_mode *hdmi_mode = &edid_4k_modes[vic];
unsigned int clock1, clock2;
/* Make sure to also match alternate clocks */
clock1 = hdmi_mode->clock;
clock2 = hdmi_mode_alternate_clock(hdmi_mode);
if ((KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock1) ||
KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock2)) &&
drm_mode_equal_no_clocks_no_stereo(to_match, hdmi_mode))
return vic;
}
return 0;
}
static bool drm_valid_hdmi_vic(u8 vic)
{
return vic > 0 && vic < ARRAY_SIZE(edid_4k_modes);
}
static int
add_alternate_cea_modes(struct drm_connector *connector, struct edid *edid)
{
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode, *tmp;
LIST_HEAD(list);
int modes = 0;
/* Don't add CEA modes if the CEA extension block is missing */
if (!drm_find_cea_extension(edid))
return 0;
/*
* Go through all probed modes and create a new mode
* with the alternate clock for certain CEA modes.
*/
list_for_each_entry(mode, &connector->probed_modes, head) {
const struct drm_display_mode *cea_mode = NULL;
struct drm_display_mode *newmode;
u8 vic = drm_match_cea_mode(mode);
unsigned int clock1, clock2;
if (drm_valid_cea_vic(vic)) {
cea_mode = &edid_cea_modes[vic];
clock2 = cea_mode_alternate_clock(cea_mode);
} else {
vic = drm_match_hdmi_mode(mode);
if (drm_valid_hdmi_vic(vic)) {
cea_mode = &edid_4k_modes[vic];
clock2 = hdmi_mode_alternate_clock(cea_mode);
}
}
if (!cea_mode)
continue;
clock1 = cea_mode->clock;
if (clock1 == clock2)
continue;
if (mode->clock != clock1 && mode->clock != clock2)
continue;
newmode = drm_mode_duplicate(dev, cea_mode);
if (!newmode)
continue;
/* Carry over the stereo flags */
newmode->flags |= mode->flags & DRM_MODE_FLAG_3D_MASK;
/*
* The current mode could be either variant. Make
* sure to pick the "other" clock for the new mode.
*/
if (mode->clock != clock1)
newmode->clock = clock1;
else
newmode->clock = clock2;
list_add_tail(&newmode->head, &list);
}
list_for_each_entry_safe(mode, tmp, &list, head) {
list_del(&mode->head);
drm_mode_probed_add(connector, mode);
modes++;
}
return modes;
}
static struct drm_display_mode *
drm_display_mode_from_vic_index(struct drm_connector *connector,
const u8 *video_db, u8 video_len,
u8 video_index)
drm/edid: support CEA video modes. TFT/plasma televisions and projectors have become commonplace, and so has the use of PCs to drive them. Add the video modes specified by an EDID's CEA extension to the mode database for a connector. Before: [ 1.158869] [drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.158875] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.158882] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 After: [ 1.144175] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.144179] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.144187] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.144190] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.144192] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 1.144195] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.144198] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.144201] [drm:drm_mode_debug_printmodeline], Modeline 27:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.144203] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.144206] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa Signed-off-by: Christian Schmidt <schmidt@digadd.de> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19 22:53:16 +08:00
{
struct drm_device *dev = connector->dev;
struct drm_display_mode *newmode;
u8 vic;
drm/edid: support CEA video modes. TFT/plasma televisions and projectors have become commonplace, and so has the use of PCs to drive them. Add the video modes specified by an EDID's CEA extension to the mode database for a connector. Before: [ 1.158869] [drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.158875] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.158882] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 After: [ 1.144175] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.144179] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.144187] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.144190] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.144192] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 1.144195] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.144198] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.144201] [drm:drm_mode_debug_printmodeline], Modeline 27:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.144203] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.144206] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa Signed-off-by: Christian Schmidt <schmidt@digadd.de> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19 22:53:16 +08:00
if (video_db == NULL || video_index >= video_len)
return NULL;
/* CEA modes are numbered 1..127 */
vic = (video_db[video_index] & 127);
if (!drm_valid_cea_vic(vic))
return NULL;
newmode = drm_mode_duplicate(dev, &edid_cea_modes[vic]);
if (!newmode)
return NULL;
newmode->vrefresh = 0;
return newmode;
}
static int
do_cea_modes(struct drm_connector *connector, const u8 *db, u8 len)
{
int i, modes = 0;
for (i = 0; i < len; i++) {
struct drm_display_mode *mode;
mode = drm_display_mode_from_vic_index(connector, db, len, i);
if (mode) {
drm_mode_probed_add(connector, mode);
modes++;
drm/edid: support CEA video modes. TFT/plasma televisions and projectors have become commonplace, and so has the use of PCs to drive them. Add the video modes specified by an EDID's CEA extension to the mode database for a connector. Before: [ 1.158869] [drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.158875] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.158882] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 After: [ 1.144175] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.144179] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.144187] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.144190] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.144192] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 1.144195] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.144198] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.144201] [drm:drm_mode_debug_printmodeline], Modeline 27:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.144203] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.144206] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa Signed-off-by: Christian Schmidt <schmidt@digadd.de> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19 22:53:16 +08:00
}
}
return modes;
}
struct stereo_mandatory_mode {
int width, height, vrefresh;
unsigned int flags;
};
static const struct stereo_mandatory_mode stereo_mandatory_modes[] = {
{ 1920, 1080, 24, DRM_MODE_FLAG_3D_TOP_AND_BOTTOM },
{ 1920, 1080, 24, DRM_MODE_FLAG_3D_FRAME_PACKING },
{ 1920, 1080, 50,
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF },
{ 1920, 1080, 60,
DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF },
{ 1280, 720, 50, DRM_MODE_FLAG_3D_TOP_AND_BOTTOM },
{ 1280, 720, 50, DRM_MODE_FLAG_3D_FRAME_PACKING },
{ 1280, 720, 60, DRM_MODE_FLAG_3D_TOP_AND_BOTTOM },
{ 1280, 720, 60, DRM_MODE_FLAG_3D_FRAME_PACKING }
};
static bool
stereo_match_mandatory(const struct drm_display_mode *mode,
const struct stereo_mandatory_mode *stereo_mode)
{
unsigned int interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
return mode->hdisplay == stereo_mode->width &&
mode->vdisplay == stereo_mode->height &&
interlaced == (stereo_mode->flags & DRM_MODE_FLAG_INTERLACE) &&
drm_mode_vrefresh(mode) == stereo_mode->vrefresh;
}
static int add_hdmi_mandatory_stereo_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
const struct drm_display_mode *mode;
struct list_head stereo_modes;
int modes = 0, i;
INIT_LIST_HEAD(&stereo_modes);
list_for_each_entry(mode, &connector->probed_modes, head) {
for (i = 0; i < ARRAY_SIZE(stereo_mandatory_modes); i++) {
const struct stereo_mandatory_mode *mandatory;
struct drm_display_mode *new_mode;
if (!stereo_match_mandatory(mode,
&stereo_mandatory_modes[i]))
continue;
mandatory = &stereo_mandatory_modes[i];
new_mode = drm_mode_duplicate(dev, mode);
if (!new_mode)
continue;
new_mode->flags |= mandatory->flags;
list_add_tail(&new_mode->head, &stereo_modes);
modes++;
}
}
list_splice_tail(&stereo_modes, &connector->probed_modes);
return modes;
}
static int add_hdmi_mode(struct drm_connector *connector, u8 vic)
{
struct drm_device *dev = connector->dev;
struct drm_display_mode *newmode;
if (!drm_valid_hdmi_vic(vic)) {
DRM_ERROR("Unknown HDMI VIC: %d\n", vic);
return 0;
}
newmode = drm_mode_duplicate(dev, &edid_4k_modes[vic]);
if (!newmode)
return 0;
drm_mode_probed_add(connector, newmode);
return 1;
}
static int add_3d_struct_modes(struct drm_connector *connector, u16 structure,
const u8 *video_db, u8 video_len, u8 video_index)
{
struct drm_display_mode *newmode;
int modes = 0;
if (structure & (1 << 0)) {
newmode = drm_display_mode_from_vic_index(connector, video_db,
video_len,
video_index);
if (newmode) {
newmode->flags |= DRM_MODE_FLAG_3D_FRAME_PACKING;
drm_mode_probed_add(connector, newmode);
modes++;
}
}
if (structure & (1 << 6)) {
newmode = drm_display_mode_from_vic_index(connector, video_db,
video_len,
video_index);
if (newmode) {
newmode->flags |= DRM_MODE_FLAG_3D_TOP_AND_BOTTOM;
drm_mode_probed_add(connector, newmode);
modes++;
}
}
if (structure & (1 << 8)) {
newmode = drm_display_mode_from_vic_index(connector, video_db,
video_len,
video_index);
if (newmode) {
newmode->flags |= DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF;
drm_mode_probed_add(connector, newmode);
modes++;
}
}
return modes;
}
/*
* do_hdmi_vsdb_modes - Parse the HDMI Vendor Specific data block
* @connector: connector corresponding to the HDMI sink
* @db: start of the CEA vendor specific block
* @len: length of the CEA block payload, ie. one can access up to db[len]
*
* Parses the HDMI VSDB looking for modes to add to @connector. This function
* also adds the stereo 3d modes when applicable.
*/
static int
do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len,
const u8 *video_db, u8 video_len)
{
int modes = 0, offset = 0, i, multi_present = 0, multi_len;
u8 vic_len, hdmi_3d_len = 0;
u16 mask;
u16 structure_all;
if (len < 8)
goto out;
/* no HDMI_Video_Present */
if (!(db[8] & (1 << 5)))
goto out;
/* Latency_Fields_Present */
if (db[8] & (1 << 7))
offset += 2;
/* I_Latency_Fields_Present */
if (db[8] & (1 << 6))
offset += 2;
/* the declared length is not long enough for the 2 first bytes
* of additional video format capabilities */
if (len < (8 + offset + 2))
goto out;
/* 3D_Present */
offset++;
if (db[8 + offset] & (1 << 7)) {
modes += add_hdmi_mandatory_stereo_modes(connector);
/* 3D_Multi_present */
multi_present = (db[8 + offset] & 0x60) >> 5;
}
offset++;
vic_len = db[8 + offset] >> 5;
hdmi_3d_len = db[8 + offset] & 0x1f;
for (i = 0; i < vic_len && len >= (9 + offset + i); i++) {
u8 vic;
vic = db[9 + offset + i];
modes += add_hdmi_mode(connector, vic);
}
offset += 1 + vic_len;
if (multi_present == 1)
multi_len = 2;
else if (multi_present == 2)
multi_len = 4;
else
multi_len = 0;
if (len < (8 + offset + hdmi_3d_len - 1))
goto out;
if (hdmi_3d_len < multi_len)
goto out;
if (multi_present == 1 || multi_present == 2) {
/* 3D_Structure_ALL */
structure_all = (db[8 + offset] << 8) | db[9 + offset];
/* check if 3D_MASK is present */
if (multi_present == 2)
mask = (db[10 + offset] << 8) | db[11 + offset];
else
mask = 0xffff;
for (i = 0; i < 16; i++) {
if (mask & (1 << i))
modes += add_3d_struct_modes(connector,
structure_all,
video_db,
video_len, i);
}
}
offset += multi_len;
for (i = 0; i < (hdmi_3d_len - multi_len); i++) {
int vic_index;
struct drm_display_mode *newmode = NULL;
unsigned int newflag = 0;
bool detail_present;
detail_present = ((db[8 + offset + i] & 0x0f) > 7);
if (detail_present && (i + 1 == hdmi_3d_len - multi_len))
break;
/* 2D_VIC_order_X */
vic_index = db[8 + offset + i] >> 4;
/* 3D_Structure_X */
switch (db[8 + offset + i] & 0x0f) {
case 0:
newflag = DRM_MODE_FLAG_3D_FRAME_PACKING;
break;
case 6:
newflag = DRM_MODE_FLAG_3D_TOP_AND_BOTTOM;
break;
case 8:
/* 3D_Detail_X */
if ((db[9 + offset + i] >> 4) == 1)
newflag = DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF;
break;
}
if (newflag != 0) {
newmode = drm_display_mode_from_vic_index(connector,
video_db,
video_len,
vic_index);
if (newmode) {
newmode->flags |= newflag;
drm_mode_probed_add(connector, newmode);
modes++;
}
}
if (detail_present)
i++;
}
out:
return modes;
}
static int
cea_db_payload_len(const u8 *db)
{
return db[0] & 0x1f;
}
static int
cea_db_tag(const u8 *db)
{
return db[0] >> 5;
}
static int
cea_revision(const u8 *cea)
{
return cea[1];
}
static int
cea_db_offsets(const u8 *cea, int *start, int *end)
{
/* Data block offset in CEA extension block */
*start = 4;
*end = cea[2];
if (*end == 0)
*end = 127;
if (*end < 4 || *end > 127)
return -ERANGE;
return 0;
}
static bool cea_db_is_hdmi_vsdb(const u8 *db)
{
int hdmi_id;
if (cea_db_tag(db) != VENDOR_BLOCK)
return false;
if (cea_db_payload_len(db) < 5)
return false;
hdmi_id = db[1] | (db[2] << 8) | (db[3] << 16);
return hdmi_id == HDMI_IEEE_OUI;
}
#define for_each_cea_db(cea, i, start, end) \
for ((i) = (start); (i) < (end) && (i) + cea_db_payload_len(&(cea)[(i)]) < (end); (i) += cea_db_payload_len(&(cea)[(i)]) + 1)
drm/edid: support CEA video modes. TFT/plasma televisions and projectors have become commonplace, and so has the use of PCs to drive them. Add the video modes specified by an EDID's CEA extension to the mode database for a connector. Before: [ 1.158869] [drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.158875] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.158882] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 After: [ 1.144175] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.144179] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.144187] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.144190] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.144192] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 1.144195] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.144198] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.144201] [drm:drm_mode_debug_printmodeline], Modeline 27:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.144203] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.144206] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa Signed-off-by: Christian Schmidt <schmidt@digadd.de> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19 22:53:16 +08:00
static int
add_cea_modes(struct drm_connector *connector, struct edid *edid)
{
const u8 *cea = drm_find_cea_extension(edid);
const u8 *db, *hdmi = NULL, *video = NULL;
u8 dbl, hdmi_len, video_len = 0;
drm/edid: support CEA video modes. TFT/plasma televisions and projectors have become commonplace, and so has the use of PCs to drive them. Add the video modes specified by an EDID's CEA extension to the mode database for a connector. Before: [ 1.158869] [drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.158875] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.158882] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 After: [ 1.144175] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.144179] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.144187] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.144190] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.144192] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 1.144195] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.144198] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.144201] [drm:drm_mode_debug_printmodeline], Modeline 27:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.144203] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.144206] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa Signed-off-by: Christian Schmidt <schmidt@digadd.de> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19 22:53:16 +08:00
int modes = 0;
if (cea && cea_revision(cea) >= 3) {
int i, start, end;
if (cea_db_offsets(cea, &start, &end))
return 0;
for_each_cea_db(cea, i, start, end) {
db = &cea[i];
dbl = cea_db_payload_len(db);
if (cea_db_tag(db) == VIDEO_BLOCK) {
video = db + 1;
video_len = dbl;
modes += do_cea_modes(connector, video, dbl);
}
else if (cea_db_is_hdmi_vsdb(db)) {
hdmi = db;
hdmi_len = dbl;
}
drm/edid: support CEA video modes. TFT/plasma televisions and projectors have become commonplace, and so has the use of PCs to drive them. Add the video modes specified by an EDID's CEA extension to the mode database for a connector. Before: [ 1.158869] [drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.158875] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.158882] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 After: [ 1.144175] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.144179] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.144187] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.144190] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.144192] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 1.144195] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.144198] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.144201] [drm:drm_mode_debug_printmodeline], Modeline 27:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.144203] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.144206] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa Signed-off-by: Christian Schmidt <schmidt@digadd.de> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19 22:53:16 +08:00
}
}
/*
* We parse the HDMI VSDB after having added the cea modes as we will
* be patching their flags when the sink supports stereo 3D.
*/
if (hdmi)
modes += do_hdmi_vsdb_modes(connector, hdmi, hdmi_len, video,
video_len);
drm/edid: support CEA video modes. TFT/plasma televisions and projectors have become commonplace, and so has the use of PCs to drive them. Add the video modes specified by an EDID's CEA extension to the mode database for a connector. Before: [ 1.158869] [drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.158875] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.158882] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 After: [ 1.144175] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.144179] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.144187] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.144190] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.144192] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 1.144195] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.144198] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.144201] [drm:drm_mode_debug_printmodeline], Modeline 27:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.144203] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.144206] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa Signed-off-by: Christian Schmidt <schmidt@digadd.de> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19 22:53:16 +08:00
return modes;
}
static void fixup_detailed_cea_mode_clock(struct drm_display_mode *mode)
{
const struct drm_display_mode *cea_mode;
int clock1, clock2, clock;
u8 vic;
const char *type;
drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz clock difference Rather than using drm_match_cea_mode() to see if the EDID detailed timings are supposed to represent one of the CEA/HDMI modes, add a special version of that function that takes in an explicit clock tolerance value (in kHz). When looking at the detailed timings specify the tolerance as 5kHz due to the 10kHz clock resolution limit inherent in detailed timings. drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks, which only allows smaller errors for lower clocks (eg. for 25200 it won't allow any error) and a bigger error for higher clocks (eg. for 297000 it actually matches 296913-297000). So it doesn't really match what we want for the fixup. Using the explicit +-5kHz is much better for this use case. Not sure if we should change the normal mode matching to also use something else besides KHZ2PICOS() since it allows a different proportion of error depending on the clock. I believe VESA CVT allows a maximum deviation of .5%, so using that for normal mode matching might be a good idea? Cc: Adam Jackson <ajax@redhat.com> Tested-by: nathan.d.ciobanu@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217 Fixes: fa3a7340eaa1 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-17 03:05:12 +08:00
/*
* allow 5kHz clock difference either way to account for
* the 10kHz clock resolution limit of detailed timings.
*/
vic = drm_match_cea_mode_clock_tolerance(mode, 5);
if (drm_valid_cea_vic(vic)) {
type = "CEA";
cea_mode = &edid_cea_modes[vic];
clock1 = cea_mode->clock;
clock2 = cea_mode_alternate_clock(cea_mode);
} else {
vic = drm_match_hdmi_mode_clock_tolerance(mode, 5);
if (drm_valid_hdmi_vic(vic)) {
type = "HDMI";
cea_mode = &edid_4k_modes[vic];
clock1 = cea_mode->clock;
clock2 = hdmi_mode_alternate_clock(cea_mode);
} else {
return;
}
}
/* pick whichever is closest */
if (abs(mode->clock - clock1) < abs(mode->clock - clock2))
clock = clock1;
else
clock = clock2;
if (mode->clock == clock)
return;
DRM_DEBUG("detailed mode matches %s VIC %d, adjusting clock %d -> %d\n",
type, vic, mode->clock, clock);
mode->clock = clock;
}
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
static void
parse_hdmi_vsdb(struct drm_connector *connector, const u8 *db)
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
{
u8 len = cea_db_payload_len(db);
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
if (len >= 6) {
connector->eld[5] |= (db[6] >> 7) << 1; /* Supports_AI */
connector->dvi_dual = db[6] & 1;
}
if (len >= 7)
connector->max_tmds_clock = db[7] * 5;
if (len >= 8) {
connector->latency_present[0] = db[8] >> 7;
connector->latency_present[1] = (db[8] >> 6) & 1;
}
if (len >= 9)
connector->video_latency[0] = db[9];
if (len >= 10)
connector->audio_latency[0] = db[10];
if (len >= 11)
connector->video_latency[1] = db[11];
if (len >= 12)
connector->audio_latency[1] = db[12];
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
DRM_DEBUG_KMS("HDMI: DVI dual %d, "
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
"max TMDS clock %d, "
"latency present %d %d, "
"video latency %d %d, "
"audio latency %d %d\n",
connector->dvi_dual,
connector->max_tmds_clock,
(int) connector->latency_present[0],
(int) connector->latency_present[1],
connector->video_latency[0],
connector->video_latency[1],
connector->audio_latency[0],
connector->audio_latency[1]);
}
static void
monitor_name(struct detailed_timing *t, void *data)
{
if (t->data.other_data.type == EDID_DETAIL_MONITOR_NAME)
*(u8 **)data = t->data.other_data.data.str.str;
}
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
/**
* drm_edid_to_eld - build ELD from EDID
* @connector: connector corresponding to the HDMI/DP sink
* @edid: EDID to parse
*
* Fill the ELD (EDID-Like Data) buffer for passing to the audio driver. The
* Conn_Type, HDCP and Port_ID ELD fields are left for the graphics driver to
* fill in.
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
*/
void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
{
uint8_t *eld = connector->eld;
u8 *cea;
u8 *name;
u8 *db;
int sad_count = 0;
int mnl;
int dbl;
memset(eld, 0, sizeof(connector->eld));
cea = drm_find_cea_extension(edid);
if (!cea) {
DRM_DEBUG_KMS("ELD: no CEA Extension found\n");
return;
}
name = NULL;
drm_for_each_detailed_block((u8 *)edid, monitor_name, &name);
for (mnl = 0; name && mnl < 13; mnl++) {
if (name[mnl] == 0x0a)
break;
eld[20 + mnl] = name[mnl];
}
eld[4] = (cea[1] << 5) | mnl;
DRM_DEBUG_KMS("ELD monitor %s\n", eld + 20);
eld[0] = 2 << 3; /* ELD version: 2 */
eld[16] = edid->mfg_id[0];
eld[17] = edid->mfg_id[1];
eld[18] = edid->prod_code[0];
eld[19] = edid->prod_code[1];
if (cea_revision(cea) >= 3) {
int i, start, end;
if (cea_db_offsets(cea, &start, &end)) {
start = 0;
end = 0;
}
for_each_cea_db(cea, i, start, end) {
db = &cea[i];
dbl = cea_db_payload_len(db);
switch (cea_db_tag(db)) {
case AUDIO_BLOCK:
/* Audio Data Block, contains SADs */
sad_count = dbl / 3;
if (dbl >= 1)
memcpy(eld + 20 + mnl, &db[1], dbl);
break;
case SPEAKER_BLOCK:
/* Speaker Allocation Data Block */
if (dbl >= 1)
eld[7] = db[1];
break;
case VENDOR_BLOCK:
/* HDMI Vendor-Specific Data Block */
if (cea_db_is_hdmi_vsdb(db))
parse_hdmi_vsdb(connector, db);
break;
default:
break;
}
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
}
}
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
eld[5] |= sad_count << 4;
eld[DRM_ELD_BASELINE_ELD_LEN] =
DIV_ROUND_UP(drm_eld_calc_baseline_block_size(eld), 4);
DRM_DEBUG_KMS("ELD size %d, SAD count %d\n",
drm_eld_size(eld), sad_count);
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
}
EXPORT_SYMBOL(drm_edid_to_eld);
/**
* drm_edid_to_sad - extracts SADs from EDID
* @edid: EDID to parse
* @sads: pointer that will be set to the extracted SADs
*
* Looks for CEA EDID block and extracts SADs (Short Audio Descriptors) from it.
*
* Note: The returned pointer needs to be freed using kfree().
*
* Return: The number of found SADs or negative number on error.
*/
int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads)
{
int count = 0;
int i, start, end, dbl;
u8 *cea;
cea = drm_find_cea_extension(edid);
if (!cea) {
DRM_DEBUG_KMS("SAD: no CEA Extension found\n");
return -ENOENT;
}
if (cea_revision(cea) < 3) {
DRM_DEBUG_KMS("SAD: wrong CEA revision\n");
return -ENOTSUPP;
}
if (cea_db_offsets(cea, &start, &end)) {
DRM_DEBUG_KMS("SAD: invalid data block offsets\n");
return -EPROTO;
}
for_each_cea_db(cea, i, start, end) {
u8 *db = &cea[i];
if (cea_db_tag(db) == AUDIO_BLOCK) {
int j;
dbl = cea_db_payload_len(db);
count = dbl / 3; /* SAD is 3B */
*sads = kcalloc(count, sizeof(**sads), GFP_KERNEL);
if (!*sads)
return -ENOMEM;
for (j = 0; j < count; j++) {
u8 *sad = &db[1 + j * 3];
(*sads)[j].format = (sad[0] & 0x78) >> 3;
(*sads)[j].channels = sad[0] & 0x7;
(*sads)[j].freq = sad[1] & 0x7F;
(*sads)[j].byte2 = sad[2];
}
break;
}
}
return count;
}
EXPORT_SYMBOL(drm_edid_to_sad);
/**
* drm_edid_to_speaker_allocation - extracts Speaker Allocation Data Blocks from EDID
* @edid: EDID to parse
* @sadb: pointer to the speaker block
*
* Looks for CEA EDID block and extracts the Speaker Allocation Data Block from it.
*
* Note: The returned pointer needs to be freed using kfree().
*
* Return: The number of found Speaker Allocation Blocks or negative number on
* error.
*/
int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb)
{
int count = 0;
int i, start, end, dbl;
const u8 *cea;
cea = drm_find_cea_extension(edid);
if (!cea) {
DRM_DEBUG_KMS("SAD: no CEA Extension found\n");
return -ENOENT;
}
if (cea_revision(cea) < 3) {
DRM_DEBUG_KMS("SAD: wrong CEA revision\n");
return -ENOTSUPP;
}
if (cea_db_offsets(cea, &start, &end)) {
DRM_DEBUG_KMS("SAD: invalid data block offsets\n");
return -EPROTO;
}
for_each_cea_db(cea, i, start, end) {
const u8 *db = &cea[i];
if (cea_db_tag(db) == SPEAKER_BLOCK) {
dbl = cea_db_payload_len(db);
/* Speaker Allocation Data Block */
if (dbl == 3) {
*sadb = kmemdup(&db[1], dbl, GFP_KERNEL);
if (!*sadb)
return -ENOMEM;
count = dbl;
break;
}
}
}
return count;
}
EXPORT_SYMBOL(drm_edid_to_speaker_allocation);
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
/**
* drm_av_sync_delay - compute the HDMI/DP sink audio-video sync delay
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
* @connector: connector associated with the HDMI/DP sink
* @mode: the display mode
*
* Return: The HDMI/DP sink's audio-video sync delay in milliseconds or 0 if
* the sink doesn't support audio or video.
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
*/
int drm_av_sync_delay(struct drm_connector *connector,
const struct drm_display_mode *mode)
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
{
int i = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
int a, v;
if (!connector->latency_present[0])
return 0;
if (!connector->latency_present[1])
i = 0;
a = connector->audio_latency[i];
v = connector->video_latency[i];
/*
* HDMI/DP sink doesn't support audio or video?
*/
if (a == 255 || v == 255)
return 0;
/*
* Convert raw EDID values to millisecond.
* Treat unknown latency as 0ms.
*/
if (a)
a = min(2 * (a - 1), 500);
if (v)
v = min(2 * (v - 1), 500);
return max(v - a, 0);
}
EXPORT_SYMBOL(drm_av_sync_delay);
/**
* drm_select_eld - select one ELD from multiple HDMI/DP sinks
* @encoder: the encoder just changed display mode
*
* It's possible for one encoder to be associated with multiple HDMI/DP sinks.
* The policy is now hard coded to simply use the first HDMI/DP sink's ELD.
*
* Return: The connector associated with the first HDMI/DP sink that has ELD
* attached to it.
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
*/
struct drm_connector *drm_select_eld(struct drm_encoder *encoder)
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
{
struct drm_connector *connector;
struct drm_device *dev = encoder->dev;
drm: Split connection_mutex out of mode_config.mutex (v3) After the split-out of crtc locks from the big mode_config.mutex there's still two major areas it protects: - Various connector probe states, like connector->status, EDID properties, probed mode lists and similar information. - The links from connector->encoder and encoder->crtc and other modeset-relevant connector state (e.g. properties which control the panel fitter). The later is used by modeset operations. But they don't really care about the former since it's allowed to e.g. enable a disconnected VGA output or with a mode not in the probed list. Thus far this hasn't been a problem, but for the atomic modeset conversion Rob Clark needs to convert all modeset relevant locks into w/w locks. This is required because the order of acquisition is determined by how userspace supplies the atomic modeset data. This has run into troubles in the detect path since the i915 load detect code needs _both_ protections offered by the mode_config.mutex: It updates probe state and it needs to change the modeset configuration to enable the temporary load detect pipe. The big deal here is that for the probe/detect users of this lock a plain mutex fits best, but for atomic modesets we really want a w/w mutex. To fix this lets split out a new connection_mutex lock for the modeset relevant parts. For simplicity I've decided to only add one additional lock for all connector/encoder links and modeset configuration states. We have piles of different modeset objects in addition to those (like bridges or panels), so adding per-object locks would be much more effort. Also, we're guaranteed (at least for now) to do a full modeset if we need to acquire this lock. Which means that fine-grained locking is fairly irrelevant compared to the amount of time the full modeset will take. I've done a full audit, and there's just a few things that justify special focus: - Locking in drm_sysfs.c is almost completely absent. We should sprinkle mode_config.connection_mutex over this file a bit, but since it already lacks mode_config.mutex this patch wont make the situation any worse. This is material for a follow-up patch. - omap has a omap_framebuffer_flush function which walks the connector->encoder->crtc links and is called from many contexts. Some look like they don't acquire mode_config.mutex, so this is already racy. Again fixing this is material for a separate patch. - The radeon hot_plug function to retrain DP links looks at connector->dpms. Currently this happens without any locking, so is already racy. I think radeon_hotplug_work_func should gain mutex_lock/unlock calls for the mode_config.connection_mutex. - Same applies to i915's intel_dp_hot_plug. But again, this is already racy. - i915 load_detect code needs to acquire this lock. Which means the w/w dance due to Rob's work will be nicely contained to _just_ this function. I've added fixme comments everywhere where it looks suspicious but in the sysfs code. After a quick irc discussion with Dave Airlie it sounds like the lack of locking in there is due to sysfs cleanup fun at module unload. v1: original (only compile tested) v2: missing mutex_init(), etc (from Rob Clark) v3: i915 needs more care in the conversion: - Protect the edp pp logic with the connection_mutex. - Use connection_mutex in the backlight code due to get_pipe_from_connector. - Use drm_modeset_lock_all in suspend/resume paths. - Update lock checks in the overlay code. Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-05-30 05:54:47 +08:00
WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
drm: Split connection_mutex out of mode_config.mutex (v3) After the split-out of crtc locks from the big mode_config.mutex there's still two major areas it protects: - Various connector probe states, like connector->status, EDID properties, probed mode lists and similar information. - The links from connector->encoder and encoder->crtc and other modeset-relevant connector state (e.g. properties which control the panel fitter). The later is used by modeset operations. But they don't really care about the former since it's allowed to e.g. enable a disconnected VGA output or with a mode not in the probed list. Thus far this hasn't been a problem, but for the atomic modeset conversion Rob Clark needs to convert all modeset relevant locks into w/w locks. This is required because the order of acquisition is determined by how userspace supplies the atomic modeset data. This has run into troubles in the detect path since the i915 load detect code needs _both_ protections offered by the mode_config.mutex: It updates probe state and it needs to change the modeset configuration to enable the temporary load detect pipe. The big deal here is that for the probe/detect users of this lock a plain mutex fits best, but for atomic modesets we really want a w/w mutex. To fix this lets split out a new connection_mutex lock for the modeset relevant parts. For simplicity I've decided to only add one additional lock for all connector/encoder links and modeset configuration states. We have piles of different modeset objects in addition to those (like bridges or panels), so adding per-object locks would be much more effort. Also, we're guaranteed (at least for now) to do a full modeset if we need to acquire this lock. Which means that fine-grained locking is fairly irrelevant compared to the amount of time the full modeset will take. I've done a full audit, and there's just a few things that justify special focus: - Locking in drm_sysfs.c is almost completely absent. We should sprinkle mode_config.connection_mutex over this file a bit, but since it already lacks mode_config.mutex this patch wont make the situation any worse. This is material for a follow-up patch. - omap has a omap_framebuffer_flush function which walks the connector->encoder->crtc links and is called from many contexts. Some look like they don't acquire mode_config.mutex, so this is already racy. Again fixing this is material for a separate patch. - The radeon hot_plug function to retrain DP links looks at connector->dpms. Currently this happens without any locking, so is already racy. I think radeon_hotplug_work_func should gain mutex_lock/unlock calls for the mode_config.connection_mutex. - Same applies to i915's intel_dp_hot_plug. But again, this is already racy. - i915 load_detect code needs to acquire this lock. Which means the w/w dance due to Rob's work will be nicely contained to _just_ this function. I've added fixme comments everywhere where it looks suspicious but in the sysfs code. After a quick irc discussion with Dave Airlie it sounds like the lack of locking in there is due to sysfs cleanup fun at module unload. v1: original (only compile tested) v2: missing mutex_init(), etc (from Rob Clark) v3: i915 needs more care in the conversion: - Protect the edp pp logic with the connection_mutex. - Use connection_mutex in the backlight code due to get_pipe_from_connector. - Use drm_modeset_lock_all in suspend/resume paths. - Update lock checks in the overlay code. Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-05-30 05:54:47 +08:00
drm_for_each_connector(connector, dev)
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:23:20 +08:00
if (connector->encoder == encoder && connector->eld[0])
return connector;
return NULL;
}
EXPORT_SYMBOL(drm_select_eld);
/**
* drm_detect_hdmi_monitor - detect whether monitor is HDMI
* @edid: monitor EDID information
*
* Parse the CEA extension according to CEA-861-B.
*
* Return: True if the monitor is HDMI, false if not or unknown.
*/
bool drm_detect_hdmi_monitor(struct edid *edid)
{
u8 *edid_ext;
int i;
int start_offset, end_offset;
edid_ext = drm_find_cea_extension(edid);
if (!edid_ext)
return false;
if (cea_db_offsets(edid_ext, &start_offset, &end_offset))
return false;
/*
* Because HDMI identifier is in Vendor Specific Block,
* search it from all data blocks of CEA extension.
*/
for_each_cea_db(edid_ext, i, start_offset, end_offset) {
if (cea_db_is_hdmi_vsdb(&edid_ext[i]))
return true;
}
return false;
}
EXPORT_SYMBOL(drm_detect_hdmi_monitor);
/**
* drm_detect_monitor_audio - check monitor audio capability
* @edid: EDID block to scan
*
* Monitor should have CEA extension block.
* If monitor has 'basic audio', but no CEA audio blocks, it's 'basic
* audio' only. If there is any audio extension block and supported
* audio format, assume at least 'basic audio' support, even if 'basic
* audio' is not defined in EDID.
*
* Return: True if the monitor supports audio, false otherwise.
*/
bool drm_detect_monitor_audio(struct edid *edid)
{
u8 *edid_ext;
int i, j;
bool has_audio = false;
int start_offset, end_offset;
edid_ext = drm_find_cea_extension(edid);
if (!edid_ext)
goto end;
has_audio = ((edid_ext[3] & EDID_BASIC_AUDIO) != 0);
if (has_audio) {
DRM_DEBUG_KMS("Monitor has basic audio support\n");
goto end;
}
if (cea_db_offsets(edid_ext, &start_offset, &end_offset))
goto end;
for_each_cea_db(edid_ext, i, start_offset, end_offset) {
if (cea_db_tag(&edid_ext[i]) == AUDIO_BLOCK) {
has_audio = true;
for (j = 1; j < cea_db_payload_len(&edid_ext[i]) + 1; j += 3)
DRM_DEBUG_KMS("CEA audio format %d\n",
(edid_ext[i + j] >> 3) & 0xf);
goto end;
}
}
end:
return has_audio;
}
EXPORT_SYMBOL(drm_detect_monitor_audio);
/**
* drm_rgb_quant_range_selectable - is RGB quantization range selectable?
* @edid: EDID block to scan
*
* Check whether the monitor reports the RGB quantization range selection
* as supported. The AVI infoframe can then be used to inform the monitor
* which quantization range (full or limited) is used.
*
* Return: True if the RGB quantization range is selectable, false otherwise.
*/
bool drm_rgb_quant_range_selectable(struct edid *edid)
{
u8 *edid_ext;
int i, start, end;
edid_ext = drm_find_cea_extension(edid);
if (!edid_ext)
return false;
if (cea_db_offsets(edid_ext, &start, &end))
return false;
for_each_cea_db(edid_ext, i, start, end) {
if (cea_db_tag(&edid_ext[i]) == VIDEO_CAPABILITY_BLOCK &&
cea_db_payload_len(&edid_ext[i]) == 2) {
DRM_DEBUG_KMS("CEA VCDB 0x%02x\n", edid_ext[i + 2]);
return edid_ext[i + 2] & EDID_CEA_VCDB_QS;
}
}
return false;
}
EXPORT_SYMBOL(drm_rgb_quant_range_selectable);
/**
* drm_assign_hdmi_deep_color_info - detect whether monitor supports
* hdmi deep color modes and update drm_display_info if so.
* @edid: monitor EDID information
* @info: Updated with maximum supported deep color bpc and color format
* if deep color supported.
* @connector: DRM connector, used only for debug output
*
* Parse the CEA extension according to CEA-861-B.
* Return true if HDMI deep color supported, false if not or unknown.
*/
static bool drm_assign_hdmi_deep_color_info(struct edid *edid,
struct drm_display_info *info,
struct drm_connector *connector)
{
u8 *edid_ext, *hdmi;
int i;
int start_offset, end_offset;
unsigned int dc_bpc = 0;
edid_ext = drm_find_cea_extension(edid);
if (!edid_ext)
return false;
if (cea_db_offsets(edid_ext, &start_offset, &end_offset))
return false;
/*
* Because HDMI identifier is in Vendor Specific Block,
* search it from all data blocks of CEA extension.
*/
for_each_cea_db(edid_ext, i, start_offset, end_offset) {
if (cea_db_is_hdmi_vsdb(&edid_ext[i])) {
/* HDMI supports at least 8 bpc */
info->bpc = 8;
hdmi = &edid_ext[i];
if (cea_db_payload_len(hdmi) < 6)
return false;
if (hdmi[6] & DRM_EDID_HDMI_DC_30) {
dc_bpc = 10;
info->edid_hdmi_dc_modes |= DRM_EDID_HDMI_DC_30;
DRM_DEBUG("%s: HDMI sink does deep color 30.\n",
connector->name);
}
if (hdmi[6] & DRM_EDID_HDMI_DC_36) {
dc_bpc = 12;
info->edid_hdmi_dc_modes |= DRM_EDID_HDMI_DC_36;
DRM_DEBUG("%s: HDMI sink does deep color 36.\n",
connector->name);
}
if (hdmi[6] & DRM_EDID_HDMI_DC_48) {
dc_bpc = 16;
info->edid_hdmi_dc_modes |= DRM_EDID_HDMI_DC_48;
DRM_DEBUG("%s: HDMI sink does deep color 48.\n",
connector->name);
}
if (dc_bpc > 0) {
DRM_DEBUG("%s: Assigning HDMI sink color depth as %d bpc.\n",
connector->name, dc_bpc);
info->bpc = dc_bpc;
/*
* Deep color support mandates RGB444 support for all video
* modes and forbids YCRCB422 support for all video modes per
* HDMI 1.3 spec.
*/
info->color_formats = DRM_COLOR_FORMAT_RGB444;
/* YCRCB444 is optional according to spec. */
if (hdmi[6] & DRM_EDID_HDMI_DC_Y444) {
info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
DRM_DEBUG("%s: HDMI sink does YCRCB444 in deep color.\n",
connector->name);
}
/*
* Spec says that if any deep color mode is supported at all,
* then deep color 36 bit must be supported.
*/
if (!(hdmi[6] & DRM_EDID_HDMI_DC_36)) {
DRM_DEBUG("%s: HDMI sink should do DC_36, but does not!\n",
connector->name);
}
return true;
}
else {
DRM_DEBUG("%s: No deep color support on this HDMI sink.\n",
connector->name);
}
}
}
return false;
}
/**
* drm_add_display_info - pull display info out if present
* @edid: EDID data
* @info: display info (attached to connector)
* @connector: connector whose edid is used to build display info
*
* Grab any available display info and stuff it into the drm_display_info
* structure that's part of the connector. Useful for tracking bpp and
* color spaces.
*/
static void drm_add_display_info(struct edid *edid,
struct drm_display_info *info,
struct drm_connector *connector)
{
u8 *edid_ext;
info->width_mm = edid->width_cm * 10;
info->height_mm = edid->height_cm * 10;
/* driver figures it out in this case */
info->bpc = 0;
info->color_formats = 0;
if (edid->revision < 3)
return;
if (!(edid->input & DRM_EDID_INPUT_DIGITAL))
return;
/* Get data from CEA blocks if present */
edid_ext = drm_find_cea_extension(edid);
if (edid_ext) {
info->cea_rev = edid_ext[1];
/* The existence of a CEA block should imply RGB support */
info->color_formats = DRM_COLOR_FORMAT_RGB444;
if (edid_ext[3] & EDID_CEA_YCRCB444)
info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
if (edid_ext[3] & EDID_CEA_YCRCB422)
info->color_formats |= DRM_COLOR_FORMAT_YCRCB422;
}
/* HDMI deep color modes supported? Assign to info, if so */
drm_assign_hdmi_deep_color_info(edid, info, connector);
/* Only defined for 1.4 with digital displays */
if (edid->revision < 4)
return;
switch (edid->input & DRM_EDID_DIGITAL_DEPTH_MASK) {
case DRM_EDID_DIGITAL_DEPTH_6:
info->bpc = 6;
break;
case DRM_EDID_DIGITAL_DEPTH_8:
info->bpc = 8;
break;
case DRM_EDID_DIGITAL_DEPTH_10:
info->bpc = 10;
break;
case DRM_EDID_DIGITAL_DEPTH_12:
info->bpc = 12;
break;
case DRM_EDID_DIGITAL_DEPTH_14:
info->bpc = 14;
break;
case DRM_EDID_DIGITAL_DEPTH_16:
info->bpc = 16;
break;
case DRM_EDID_DIGITAL_DEPTH_UNDEF:
default:
info->bpc = 0;
break;
}
DRM_DEBUG("%s: Assigning EDID-1.4 digital sink color depth as %d bpc.\n",
connector->name, info->bpc);
info->color_formats |= DRM_COLOR_FORMAT_RGB444;
if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB444)
info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422)
info->color_formats |= DRM_COLOR_FORMAT_YCRCB422;
}
/**
* drm_add_edid_modes - add modes from EDID data, if available
* @connector: connector we're probing
* @edid: EDID data
*
* Add the specified modes to the connector's mode list.
*
* Return: The number of modes added or 0 if we couldn't find any.
*/
int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
{
int num_modes = 0;
u32 quirks;
if (edid == NULL) {
return 0;
}
if (!drm_edid_is_valid(edid)) {
dev_warn(connector->dev->dev, "%s: EDID invalid.\n",
connector->name);
return 0;
}
quirks = edid_get_quirks(edid);
/*
* EDID spec says modes should be preferred in this order:
* - preferred detailed mode
* - other detailed modes from base block
* - detailed modes from extension blocks
* - CVT 3-byte code modes
* - standard timing codes
* - established timing codes
* - modes inferred from GTF or CVT range information
*
* We get this pretty much right.
*
* XXX order for additional mode types in extension blocks?
*/
num_modes += add_detailed_modes(connector, edid, quirks);
num_modes += add_cvt_modes(connector, edid);
num_modes += add_standard_modes(connector, edid);
num_modes += add_established_modes(connector, edid);
drm/edid: support CEA video modes. TFT/plasma televisions and projectors have become commonplace, and so has the use of PCs to drive them. Add the video modes specified by an EDID's CEA extension to the mode database for a connector. Before: [ 1.158869] [drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1080i" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.158875] [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.158882] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 After: [ 1.144175] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 0 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.144179] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x48 0x15 [ 1.144187] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.144190] [drm:drm_mode_debug_printmodeline], Modeline 29:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.144192] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 1.144195] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.144198] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.144201] [drm:drm_mode_debug_printmodeline], Modeline 27:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.144203] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.144206] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa Signed-off-by: Christian Schmidt <schmidt@digadd.de> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19 22:53:16 +08:00
num_modes += add_cea_modes(connector, edid);
num_modes += add_alternate_cea_modes(connector, edid);
if (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF)
num_modes += add_inferred_modes(connector, edid);
if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
edid_fixup_preferred(connector, quirks);
drm_add_display_info(edid, &connector->display_info, connector);
if (quirks & EDID_QUIRK_FORCE_8BPC)
connector->display_info.bpc = 8;
if (quirks & EDID_QUIRK_FORCE_12BPC)
connector->display_info.bpc = 12;
return num_modes;
}
EXPORT_SYMBOL(drm_add_edid_modes);
/**
* drm_add_modes_noedid - add modes for the connectors without EDID
* @connector: connector we're probing
* @hdisplay: the horizontal display limit
* @vdisplay: the vertical display limit
*
* Add the specified modes to the connector's mode list. Only when the
* hdisplay/vdisplay is not beyond the given limit, it will be added.
*
* Return: The number of modes added or 0 if we couldn't find any.
*/
int drm_add_modes_noedid(struct drm_connector *connector,
int hdisplay, int vdisplay)
{
int i, count, num_modes = 0;
struct drm_display_mode *mode;
struct drm_device *dev = connector->dev;
count = ARRAY_SIZE(drm_dmt_modes);
if (hdisplay < 0)
hdisplay = 0;
if (vdisplay < 0)
vdisplay = 0;
for (i = 0; i < count; i++) {
const struct drm_display_mode *ptr = &drm_dmt_modes[i];
if (hdisplay && vdisplay) {
/*
* Only when two are valid, they will be used to check
* whether the mode should be added to the mode list of
* the connector.
*/
if (ptr->hdisplay > hdisplay ||
ptr->vdisplay > vdisplay)
continue;
}
if (drm_mode_vrefresh(ptr) > 61)
continue;
mode = drm_mode_duplicate(dev, ptr);
if (mode) {
drm_mode_probed_add(connector, mode);
num_modes++;
}
}
return num_modes;
}
EXPORT_SYMBOL(drm_add_modes_noedid);
/**
* drm_set_preferred_mode - Sets the preferred mode of a connector
* @connector: connector whose mode list should be processed
* @hpref: horizontal resolution of preferred mode
* @vpref: vertical resolution of preferred mode
*
* Marks a mode as preferred if it matches the resolution specified by @hpref
* and @vpref.
*/
void drm_set_preferred_mode(struct drm_connector *connector,
int hpref, int vpref)
{
struct drm_display_mode *mode;
list_for_each_entry(mode, &connector->probed_modes, head) {
if (mode->hdisplay == hpref &&
mode->vdisplay == vpref)
mode->type |= DRM_MODE_TYPE_PREFERRED;
}
}
EXPORT_SYMBOL(drm_set_preferred_mode);
/**
* drm_hdmi_avi_infoframe_from_display_mode() - fill an HDMI AVI infoframe with
* data from a DRM display mode
* @frame: HDMI AVI infoframe
* @mode: DRM display mode
*
* Return: 0 on success or a negative error code on failure.
*/
int
drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
const struct drm_display_mode *mode)
{
int err;
if (!frame || !mode)
return -EINVAL;
err = hdmi_avi_infoframe_init(frame);
if (err < 0)
return err;
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
frame->pixel_repeat = 1;
frame->video_code = drm_match_cea_mode(mode);
frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
/*
* Populate picture aspect ratio from either
* user input (if specified) or from the CEA mode list.
*/
if (mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_4_3 ||
mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_16_9)
frame->picture_aspect = mode->picture_aspect_ratio;
else if (frame->video_code > 0)
frame->picture_aspect = drm_get_cea_aspect_ratio(
frame->video_code);
frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
return 0;
}
EXPORT_SYMBOL(drm_hdmi_avi_infoframe_from_display_mode);
static enum hdmi_3d_structure
s3d_structure_from_display_mode(const struct drm_display_mode *mode)
{
u32 layout = mode->flags & DRM_MODE_FLAG_3D_MASK;
switch (layout) {
case DRM_MODE_FLAG_3D_FRAME_PACKING:
return HDMI_3D_STRUCTURE_FRAME_PACKING;
case DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE:
return HDMI_3D_STRUCTURE_FIELD_ALTERNATIVE;
case DRM_MODE_FLAG_3D_LINE_ALTERNATIVE:
return HDMI_3D_STRUCTURE_LINE_ALTERNATIVE;
case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL:
return HDMI_3D_STRUCTURE_SIDE_BY_SIDE_FULL;
case DRM_MODE_FLAG_3D_L_DEPTH:
return HDMI_3D_STRUCTURE_L_DEPTH;
case DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH:
return HDMI_3D_STRUCTURE_L_DEPTH_GFX_GFX_DEPTH;
case DRM_MODE_FLAG_3D_TOP_AND_BOTTOM:
return HDMI_3D_STRUCTURE_TOP_AND_BOTTOM;
case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF:
return HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF;
default:
return HDMI_3D_STRUCTURE_INVALID;
}
}
/**
* drm_hdmi_vendor_infoframe_from_display_mode() - fill an HDMI infoframe with
* data from a DRM display mode
* @frame: HDMI vendor infoframe
* @mode: DRM display mode
*
* Note that there's is a need to send HDMI vendor infoframes only when using a
* 4k or stereoscopic 3D mode. So when giving any other mode as input this
* function will return -EINVAL, error that can be safely ignored.
*
* Return: 0 on success or a negative error code on failure.
*/
int
drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
const struct drm_display_mode *mode)
{
int err;
u32 s3d_flags;
u8 vic;
if (!frame || !mode)
return -EINVAL;
vic = drm_match_hdmi_mode(mode);
s3d_flags = mode->flags & DRM_MODE_FLAG_3D_MASK;
if (!vic && !s3d_flags)
return -EINVAL;
if (vic && s3d_flags)
return -EINVAL;
err = hdmi_vendor_infoframe_init(frame);
if (err < 0)
return err;
if (vic)
frame->vic = vic;
else
frame->s3d_struct = s3d_structure_from_display_mode(mode);
return 0;
}
EXPORT_SYMBOL(drm_hdmi_vendor_infoframe_from_display_mode);
static int drm_parse_display_id(struct drm_connector *connector,
u8 *displayid, int length,
bool is_edid_extension)
{
/* if this is an EDID extension the first byte will be 0x70 */
int idx = 0;
struct displayid_hdr *base;
struct displayid_block *block;
u8 csum = 0;
int i;
if (is_edid_extension)
idx = 1;
base = (struct displayid_hdr *)&displayid[idx];
DRM_DEBUG_KMS("base revision 0x%x, length %d, %d %d\n",
base->rev, base->bytes, base->prod_id, base->ext_count);
if (base->bytes + 5 > length - idx)
return -EINVAL;
for (i = idx; i <= base->bytes + 5; i++) {
csum += displayid[i];
}
if (csum) {
DRM_ERROR("DisplayID checksum invalid, remainder is %d\n", csum);
return -EINVAL;
}
block = (struct displayid_block *)&displayid[idx + 4];
DRM_DEBUG_KMS("block id %d, rev %d, len %d\n",
block->tag, block->rev, block->num_bytes);
switch (block->tag) {
case DATA_BLOCK_TILED_DISPLAY: {
struct displayid_tiled_block *tile = (struct displayid_tiled_block *)block;
u16 w, h;
u8 tile_v_loc, tile_h_loc;
u8 num_v_tile, num_h_tile;
struct drm_tile_group *tg;
w = tile->tile_size[0] | tile->tile_size[1] << 8;
h = tile->tile_size[2] | tile->tile_size[3] << 8;
num_v_tile = (tile->topo[0] & 0xf) | (tile->topo[2] & 0x30);
num_h_tile = (tile->topo[0] >> 4) | ((tile->topo[2] >> 2) & 0x30);
tile_v_loc = (tile->topo[1] & 0xf) | ((tile->topo[2] & 0x3) << 4);
tile_h_loc = (tile->topo[1] >> 4) | (((tile->topo[2] >> 2) & 0x3) << 4);
connector->has_tile = true;
if (tile->tile_cap & 0x80)
connector->tile_is_single_monitor = true;
connector->num_h_tile = num_h_tile + 1;
connector->num_v_tile = num_v_tile + 1;
connector->tile_h_loc = tile_h_loc;
connector->tile_v_loc = tile_v_loc;
connector->tile_h_size = w + 1;
connector->tile_v_size = h + 1;
DRM_DEBUG_KMS("tile cap 0x%x\n", tile->tile_cap);
DRM_DEBUG_KMS("tile_size %d x %d\n", w + 1, h + 1);
DRM_DEBUG_KMS("topo num tiles %dx%d, location %dx%d\n",
num_h_tile + 1, num_v_tile + 1, tile_h_loc, tile_v_loc);
DRM_DEBUG_KMS("vend %c%c%c\n", tile->topology_id[0], tile->topology_id[1], tile->topology_id[2]);
tg = drm_mode_get_tile_group(connector->dev, tile->topology_id);
if (!tg) {
tg = drm_mode_create_tile_group(connector->dev, tile->topology_id);
}
if (!tg)
return -ENOMEM;
if (connector->tile_group != tg) {
/* if we haven't got a pointer,
take the reference, drop ref to old tile group */
if (connector->tile_group) {
drm_mode_put_tile_group(connector->dev, connector->tile_group);
}
connector->tile_group = tg;
} else
/* if same tile group, then release the ref we just took. */
drm_mode_put_tile_group(connector->dev, tg);
}
break;
default:
printk("unknown displayid tag %d\n", block->tag);
break;
}
return 0;
}
static void drm_get_displayid(struct drm_connector *connector,
struct edid *edid)
{
void *displayid = NULL;
int ret;
connector->has_tile = false;
displayid = drm_find_displayid_extension(edid);
if (!displayid) {
/* drop reference to any tile group we had */
goto out_drop_ref;
}
ret = drm_parse_display_id(connector, displayid, EDID_LENGTH, true);
if (ret < 0)
goto out_drop_ref;
if (!connector->has_tile)
goto out_drop_ref;
return;
out_drop_ref:
if (connector->tile_group) {
drm_mode_put_tile_group(connector->dev, connector->tile_group);
connector->tile_group = NULL;
}
return;
}