UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/mfd/intel-lpss-pci.c

334 lines
14 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04 16:11:33 +08:00
// SPDX-License-Identifier: GPL-2.0-only
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
/*
* Intel LPSS PCI support.
*
* Copyright (C) 2015, Intel Corporation
*
* Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* Mika Westerberg <mika.westerberg@linux.intel.com>
*/
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
mfd: intel-lpss: Pass SDA hold time to I2C host controller driver Intel Skylake the LPSS I2C pad circuit has internal delays that require programming non-zero SDA hold time for the I2C host controller. If this is not done communication to slave devices may fail with arbitration lost errors like the one seen below taken from Lenovo Yoga 900: i2c_hid i2c-SYNA2B29:00: Fetching the HID descriptor i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=20 00 i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration To fix this we follow what the Windows driver is doing and pass the default SDA hold time of 230 ns to all Intel Skylake host controllers. This still allows the platform to override these values by passing special ACPI methods SSCN and FMCN. Reported-by: Kevin Fenzi <kevin@scrye.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-30 23:11:42 +08:00
#include <linux/property.h>
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
#include "intel-lpss.h"
static int intel_lpss_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct intel_lpss_platform_info *info;
int ret;
ret = pcim_enable_device(pdev);
if (ret)
return ret;
info = devm_kmemdup(&pdev->dev, (void *)id->driver_data, sizeof(*info),
GFP_KERNEL);
if (!info)
return -ENOMEM;
info->mem = &pdev->resource[0];
info->irq = pdev->irq;
mfd: intel-lpss: Remove D3cold delay Goodix touchpad may drop its first couple input events when i2c-designware-platdrv and intel-lpss it connects to took too long to runtime resume from runtime suspended state. This issue happens becuase the touchpad has a rather small buffer to store up to 13 input events, so if the host doesn't read those events in time (i.e. runtime resume takes too long), events are dropped from the touchpad's buffer. The bottleneck is D3cold delay it waits when transitioning from D3cold to D0, hence remove the delay to make the resume faster. I've tested some systems with intel-lpss and haven't seen any regression. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202683 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-05 12:55:03 +08:00
pdev->d3cold_delay = 0;
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
/* Probably it is enough to set this for iDMA capable devices only */
pci_set_master(pdev);
mfd: intel-lpss: Try to enable Memory-Write-Invalidate Enable MWI mechanism if PCI bus master supports it. It might be potential benefit in some cases. Documentation [1] says that standard Memory Write might supply more current data than in the CPU modified cache line and "trashing a line in the cache may trash some data that is more current that in the memory line". This allows to avoid potential retries and other performance degradation issues on the bus. [1] PCI System Architecture, 4th edition, ISBN: 0-201-30974-2, pp.117-119. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-15 18:37:04 +08:00
pci_try_set_mwi(pdev);
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
ret = intel_lpss_probe(&pdev->dev, info);
if (ret)
return ret;
pm_runtime_put(&pdev->dev);
pm_runtime_allow(&pdev->dev);
return 0;
}
static void intel_lpss_pci_remove(struct pci_dev *pdev)
{
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
intel_lpss_remove(&pdev->dev);
}
static INTEL_LPSS_PM_OPS(intel_lpss_pci_pm_ops);
static const struct intel_lpss_platform_info spt_info = {
.clk_rate = 120000000,
};
mfd: intel-lpss: Pass SDA hold time to I2C host controller driver Intel Skylake the LPSS I2C pad circuit has internal delays that require programming non-zero SDA hold time for the I2C host controller. If this is not done communication to slave devices may fail with arbitration lost errors like the one seen below taken from Lenovo Yoga 900: i2c_hid i2c-SYNA2B29:00: Fetching the HID descriptor i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=20 00 i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration To fix this we follow what the Windows driver is doing and pass the default SDA hold time of 230 ns to all Intel Skylake host controllers. This still allows the platform to override these values by passing special ACPI methods SSCN and FMCN. Reported-by: Kevin Fenzi <kevin@scrye.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-30 23:11:42 +08:00
static struct property_entry spt_i2c_properties[] = {
PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 230),
{ },
};
static const struct intel_lpss_platform_info spt_i2c_info = {
.clk_rate = 120000000,
device property: don't bother the drivers with struct property_set Since device_add_property_set() now always takes a copy of the property_set, and also since the fwnode type is always hard coded to be FWNODE_PDATA, there is no need for the drivers to deliver the entire struct property_set. The function can just create the instance of it on its own and bind the properties from the drivers to it on the spot. This renames device_add_property_set() to device_add_properties(). The function now takes struct property_entry as its parameter instead of struct property_set. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-29 19:52:23 +08:00
.properties = spt_i2c_properties,
mfd: intel-lpss: Pass SDA hold time to I2C host controller driver Intel Skylake the LPSS I2C pad circuit has internal delays that require programming non-zero SDA hold time for the I2C host controller. If this is not done communication to slave devices may fail with arbitration lost errors like the one seen below taken from Lenovo Yoga 900: i2c_hid i2c-SYNA2B29:00: Fetching the HID descriptor i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=20 00 i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration To fix this we follow what the Windows driver is doing and pass the default SDA hold time of 230 ns to all Intel Skylake host controllers. This still allows the platform to override these values by passing special ACPI methods SSCN and FMCN. Reported-by: Kevin Fenzi <kevin@scrye.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-30 23:11:42 +08:00
};
mfd: intel-lpss: Pass HSUART configuration via properties The HS-UART host controller driver needs to know certain properties like width of the register set if it cannot get that information from ACPI or DT. In order to support non-ACPI systems we pass this information to the driver via device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-30 23:11:43 +08:00
static struct property_entry uart_properties[] = {
PROPERTY_ENTRY_U32("reg-io-width", 4),
PROPERTY_ENTRY_U32("reg-shift", 2),
PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
{ },
};
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
static const struct intel_lpss_platform_info spt_uart_info = {
.clk_rate = 120000000,
.clk_con_id = "baudclk",
device property: don't bother the drivers with struct property_set Since device_add_property_set() now always takes a copy of the property_set, and also since the fwnode type is always hard coded to be FWNODE_PDATA, there is no need for the drivers to deliver the entire struct property_set. The function can just create the instance of it on its own and bind the properties from the drivers to it on the spot. This renames device_add_property_set() to device_add_properties(). The function now takes struct property_entry as its parameter instead of struct property_set. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-29 19:52:23 +08:00
.properties = uart_properties,
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
};
mfd: lpss: Add Intel Broxton PCI IDs Intel Broxton has the same LPSS block than Intel Sunrisepoint so add Broxton PCI IDs to the list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-21 17:41:48 +08:00
static const struct intel_lpss_platform_info bxt_info = {
.clk_rate = 100000000,
};
static const struct intel_lpss_platform_info bxt_uart_info = {
.clk_rate = 100000000,
.clk_con_id = "baudclk",
device property: don't bother the drivers with struct property_set Since device_add_property_set() now always takes a copy of the property_set, and also since the fwnode type is always hard coded to be FWNODE_PDATA, there is no need for the drivers to deliver the entire struct property_set. The function can just create the instance of it on its own and bind the properties from the drivers to it on the spot. This renames device_add_property_set() to device_add_properties(). The function now takes struct property_entry as its parameter instead of struct property_set. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-29 19:52:23 +08:00
.properties = uart_properties,
mfd: lpss: Add Intel Broxton PCI IDs Intel Broxton has the same LPSS block than Intel Sunrisepoint so add Broxton PCI IDs to the list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-21 17:41:48 +08:00
};
mfd: intel-lpss: Pass I2C configuration via properties on BXT I2C host controller need to be configured properly in order to meet I2C timings specified in the I2C protocol specification. Some Intel Broxton based machines do not have this information in the ACPI namespace (or the boot firmware does not support ACPI at all) so we use build-in device properties instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-26 20:17:49 +08:00
static struct property_entry bxt_i2c_properties[] = {
PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 42),
PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
{ },
};
mfd: lpss: Add Intel Broxton PCI IDs Intel Broxton has the same LPSS block than Intel Sunrisepoint so add Broxton PCI IDs to the list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-21 17:41:48 +08:00
static const struct intel_lpss_platform_info bxt_i2c_info = {
.clk_rate = 133000000,
device property: don't bother the drivers with struct property_set Since device_add_property_set() now always takes a copy of the property_set, and also since the fwnode type is always hard coded to be FWNODE_PDATA, there is no need for the drivers to deliver the entire struct property_set. The function can just create the instance of it on its own and bind the properties from the drivers to it on the spot. This renames device_add_property_set() to device_add_properties(). The function now takes struct property_entry as its parameter instead of struct property_set. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-29 19:52:23 +08:00
.properties = bxt_i2c_properties,
mfd: lpss: Add Intel Broxton PCI IDs Intel Broxton has the same LPSS block than Intel Sunrisepoint so add Broxton PCI IDs to the list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-21 17:41:48 +08:00
};
mfd: intel-lpss: Add default I2C device properties for Apollo Lake Default I2C device properties for Intel Broxton, especially SDA hold time may not be enough on Intel Apollo Lake. These properties are used in case we don't get timing parameters from ACPI. The default SDA hold time for Broxton may fail with arbitration lost errors on Apollo Lake: i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration Fix this by using different default device properties on Apollo Lake than Broxton. Reported-by: Paul Liu <paul.liu@canonical.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156181 Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-12 19:41:33 +08:00
static struct property_entry apl_i2c_properties[] = {
PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207),
PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
{ },
};
static const struct intel_lpss_platform_info apl_i2c_info = {
.clk_rate = 133000000,
.properties = apl_i2c_properties,
};
mfd: intel-lpss: Fix Intel Cannon Lake LPSS I2C input clock Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C. This incorrect input clock rate results too high I2C bus clock in case ACPI doesn't provide tuned I2C timing parameters since I2C host controller driver calculates them from input clock rate. Fix this by using the correct rate. We still share the same 230 ns SDA hold time value than Sunrisepoint. Cc: stable@vger.kernel.org Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Reported-by: Chris Chiu <chiu@endlessm.com> Reported-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-18 16:38:27 +08:00
static const struct intel_lpss_platform_info cnl_i2c_info = {
.clk_rate = 216000000,
.properties = spt_i2c_properties,
};
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
static const struct pci_device_id intel_lpss_pci_ids[] = {
mfd: intel-lpss: Add Intel Comet Lake PCI IDs Intel Comet Lake has the same LPSS than Intel Cannon Lake. Add the new IDs to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Evan Green <evgreen@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-01 00:56:26 +08:00
/* CML */
{ PCI_VDEVICE(INTEL, 0x02a8), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0x02a9), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0x02aa), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0x02ab), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0x02c5), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x02c6), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x02c7), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0x02e8), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x02e9), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x02ea), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x02eb), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x02fb), (kernel_ulong_t)&spt_info },
mfd: lpss: Add PCI IDs for Intel Broxton B-Step platform Add PCI IDs for Intel Broxton B-Step platform, which have same LPSS devices with A-Step. Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> cked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-15 00:12:31 +08:00
/* BXT A-Step */
mfd: lpss: Add Intel Broxton PCI IDs Intel Broxton has the same LPSS block than Intel Sunrisepoint so add Broxton PCI IDs to the list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-21 17:41:48 +08:00
{ PCI_VDEVICE(INTEL, 0x0aac), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x0aae), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x0ab0), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x0ab2), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x0ab4), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x0ab6), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x0ab8), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x0aba), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x0abc), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x0abe), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x0ac0), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x0ac2), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x0ac4), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x0ac6), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x0aee), (kernel_ulong_t)&bxt_uart_info },
mfd: lpss: Add PCI IDs for Intel Broxton B-Step platform Add PCI IDs for Intel Broxton B-Step platform, which have same LPSS devices with A-Step. Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> cked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-15 00:12:31 +08:00
/* BXT B-Step */
{ PCI_VDEVICE(INTEL, 0x1aac), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x1aae), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x1ab0), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x1ab2), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x1ab4), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x1ab6), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x1ab8), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x1aba), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x1abc), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x1abe), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x1ac0), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x1ac2), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x1ac4), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x1ac6), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x1aee), (kernel_ulong_t)&bxt_uart_info },
mfd: intel-lpss: Add Intel Gemini Lake PCI IDs Intel Gemini Lake is essentially Broxton with different PCI IDs. Add these new PCI IDs to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-01-11 20:16:09 +08:00
/* GLK */
{ PCI_VDEVICE(INTEL, 0x31ac), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x31ae), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x31b0), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x31b2), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x31b4), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x31b6), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x31b8), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x31ba), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x31bc), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x31be), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x31c0), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x31c2), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x31c4), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x31c6), (kernel_ulong_t)&bxt_info },
mfd: intel-lpss: Keep device tables sorted by ID Easier to find and maintain if the device tables sorted by ID. Do it here for intel-lpss MFD driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-25 02:13:44 +08:00
{ PCI_VDEVICE(INTEL, 0x31ee), (kernel_ulong_t)&bxt_uart_info },
mfd: intel-lpss: Add Ice Lake PCI IDs Intel Ice Lake has the same LPSS than Intel Cannon Lake. Add the new IDs to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-06-28 04:48:08 +08:00
/* ICL-LP */
{ PCI_VDEVICE(INTEL, 0x34a8), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0x34a9), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0x34aa), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0x34ab), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0x34c5), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x34c6), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x34c7), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0x34e8), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x34e9), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x34ea), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x34eb), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x34fb), (kernel_ulong_t)&spt_info },
mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs Intel Elkhart Lake has the same LPSS than Intel Broxton. Add the new IDs to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-21 20:58:07 +08:00
/* EHL */
{ PCI_VDEVICE(INTEL, 0x4b28), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x4b29), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x4b2a), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x4b2b), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x4b37), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x4b44), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x4b45), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x4b4b), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x4b4c), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x4b4d), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x4b78), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x4b79), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x4b7a), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x4b7b), (kernel_ulong_t)&bxt_i2c_info },
mfd: lpss: Add Intel Broxton PCI IDs Intel Broxton has the same LPSS block than Intel Sunrisepoint so add Broxton PCI IDs to the list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-21 17:41:48 +08:00
/* APL */
mfd: intel-lpss: Add default I2C device properties for Apollo Lake Default I2C device properties for Intel Broxton, especially SDA hold time may not be enough on Intel Apollo Lake. These properties are used in case we don't get timing parameters from ACPI. The default SDA hold time for Broxton may fail with arbitration lost errors on Apollo Lake: i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration Fix this by using different default device properties on Apollo Lake than Broxton. Reported-by: Paul Liu <paul.liu@canonical.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156181 Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-12 19:41:33 +08:00
{ PCI_VDEVICE(INTEL, 0x5aac), (kernel_ulong_t)&apl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x5aae), (kernel_ulong_t)&apl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x5ab0), (kernel_ulong_t)&apl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x5ab2), (kernel_ulong_t)&apl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x5ab4), (kernel_ulong_t)&apl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x5ab6), (kernel_ulong_t)&apl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x5ab8), (kernel_ulong_t)&apl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x5aba), (kernel_ulong_t)&apl_i2c_info },
mfd: lpss: Add Intel Broxton PCI IDs Intel Broxton has the same LPSS block than Intel Sunrisepoint so add Broxton PCI IDs to the list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-21 17:41:48 +08:00
{ PCI_VDEVICE(INTEL, 0x5abc), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x5abe), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x5ac0), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0x5ac2), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x5ac4), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x5ac6), (kernel_ulong_t)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x5aee), (kernel_ulong_t)&bxt_uart_info },
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
/* SPT-LP */
{ PCI_VDEVICE(INTEL, 0x9d27), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0x9d28), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0x9d29), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0x9d2a), (kernel_ulong_t)&spt_info },
mfd: intel-lpss: Pass SDA hold time to I2C host controller driver Intel Skylake the LPSS I2C pad circuit has internal delays that require programming non-zero SDA hold time for the I2C host controller. If this is not done communication to slave devices may fail with arbitration lost errors like the one seen below taken from Lenovo Yoga 900: i2c_hid i2c-SYNA2B29:00: Fetching the HID descriptor i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=20 00 i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration To fix this we follow what the Windows driver is doing and pass the default SDA hold time of 230 ns to all Intel Skylake host controllers. This still allows the platform to override these values by passing special ACPI methods SSCN and FMCN. Reported-by: Kevin Fenzi <kevin@scrye.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-30 23:11:42 +08:00
{ PCI_VDEVICE(INTEL, 0x9d60), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x9d61), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x9d62), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x9d63), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x9d64), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x9d65), (kernel_ulong_t)&spt_i2c_info },
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
{ PCI_VDEVICE(INTEL, 0x9d66), (kernel_ulong_t)&spt_uart_info },
mfd: intel-lpss: Add Intel Cannonlake PCI IDs Intel Cannonlake PCH has the same LPSS than Intel Kabylake. Add the new IDs to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-05-15 16:23:14 +08:00
/* CNL-LP */
{ PCI_VDEVICE(INTEL, 0x9da8), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0x9da9), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0x9daa), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0x9dab), (kernel_ulong_t)&spt_info },
mfd: intel-lpss: Fix Intel Cannon Lake LPSS I2C input clock Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C. This incorrect input clock rate results too high I2C bus clock in case ACPI doesn't provide tuned I2C timing parameters since I2C host controller driver calculates them from input clock rate. Fix this by using the correct rate. We still share the same 230 ns SDA hold time value than Sunrisepoint. Cc: stable@vger.kernel.org Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Reported-by: Chris Chiu <chiu@endlessm.com> Reported-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-18 16:38:27 +08:00
{ PCI_VDEVICE(INTEL, 0x9dc5), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x9dc6), (kernel_ulong_t)&cnl_i2c_info },
mfd: intel-lpss: Add Intel Cannonlake PCI IDs Intel Cannonlake PCH has the same LPSS than Intel Kabylake. Add the new IDs to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-05-15 16:23:14 +08:00
{ PCI_VDEVICE(INTEL, 0x9dc7), (kernel_ulong_t)&spt_uart_info },
mfd: intel-lpss: Fix Intel Cannon Lake LPSS I2C input clock Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C. This incorrect input clock rate results too high I2C bus clock in case ACPI doesn't provide tuned I2C timing parameters since I2C host controller driver calculates them from input clock rate. Fix this by using the correct rate. We still share the same 230 ns SDA hold time value than Sunrisepoint. Cc: stable@vger.kernel.org Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Reported-by: Chris Chiu <chiu@endlessm.com> Reported-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-18 16:38:27 +08:00
{ PCI_VDEVICE(INTEL, 0x9de8), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x9de9), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x9dea), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0x9deb), (kernel_ulong_t)&cnl_i2c_info },
mfd: intel-lpss: Keep device tables sorted by ID Easier to find and maintain if the device tables sorted by ID. Do it here for intel-lpss MFD driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-25 02:13:44 +08:00
{ PCI_VDEVICE(INTEL, 0x9dfb), (kernel_ulong_t)&spt_info },
mfd: intel-lpss: Add Intel Tiger Lake PCI IDs Intel Tiger Lake has the same LPSS than Intel Broxton. Add the new IDs to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-01 21:28:41 +08:00
/* TGL-LP */
{ PCI_VDEVICE(INTEL, 0xa0a8), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa0a9), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa0aa), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa0ab), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa0c5), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa0c6), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa0c7), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa0d8), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa0d9), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa0da), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa0db), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa0dc), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa0dd), (kernel_ulong_t)&bxt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa0de), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa0df), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa0e8), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa0e9), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa0ea), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa0eb), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa0fb), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa0fd), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa0fe), (kernel_ulong_t)&spt_info },
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
/* SPT-H */
{ PCI_VDEVICE(INTEL, 0xa127), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa128), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa129), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa12a), (kernel_ulong_t)&spt_info },
mfd: intel-lpss: Pass SDA hold time to I2C host controller driver Intel Skylake the LPSS I2C pad circuit has internal delays that require programming non-zero SDA hold time for the I2C host controller. If this is not done communication to slave devices may fail with arbitration lost errors like the one seen below taken from Lenovo Yoga 900: i2c_hid i2c-SYNA2B29:00: Fetching the HID descriptor i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=20 00 i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration To fix this we follow what the Windows driver is doing and pass the default SDA hold time of 230 ns to all Intel Skylake host controllers. This still allows the platform to override these values by passing special ACPI methods SSCN and FMCN. Reported-by: Kevin Fenzi <kevin@scrye.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-30 23:11:42 +08:00
{ PCI_VDEVICE(INTEL, 0xa160), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa161), (kernel_ulong_t)&spt_i2c_info },
mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices This patch adds a missing PCI ID of the Intel Sunrise Point chipset to the Intel LPSS driver. It fixes a bug causing the touchpad of the Lenovo Yoga 720-15 not to be recognized. See also bug 1700657 on bugs.launchpad.net. Many thanks to CoolStar, who found this solution! Reported-by: CoolStar <coolstarorganization@gmail.com> Tested-by: Mike Schwartz <mykesx@gmail.com> Tested-by: Björn Dahlgren <bjodah@gmail.com> Signed-off-by: Florian R. Hölzlwimmer <git.ich@frhoelzlwimmer.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-19 21:26:49 +08:00
{ PCI_VDEVICE(INTEL, 0xa162), (kernel_ulong_t)&spt_i2c_info },
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
{ PCI_VDEVICE(INTEL, 0xa166), (kernel_ulong_t)&spt_uart_info },
mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs Intel Kaby Lake PCH-H has the same LPSS than Intel Sunrisepoint. Add the new IDs to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-07-04 23:24:54 +08:00
/* KBL-H */
mfd: lpss: Fix Intel Kaby Lake PCH-H properties There are a few issues on Intel Kaby Lake PCH-H properties added by commit a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs"): - Input clock of I2C controller on Intel Kaby Lake PCH-H is 120 MHz not 133 MHz. This was probably copy-paste error from Intel Broxton I2C properties. - There is no default I2C SDA hold time specified which is used when ACPI doesn't provide it. I got information from Windows driver team that Kaby Lake PCH-H can use the same configuration than Intel Sunrisepoint PCH. - Common HS-UART properties are not used. Fix these by reusing the Sunrisepoint properties on Kaby Lake PCH-H. Fixes: a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs") Reported-by: Xiang A Wang <xiang.a.wang@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-29 17:59:39 +08:00
{ PCI_VDEVICE(INTEL, 0xa2a7), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa2a8), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa2a9), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa2aa), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa2e0), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e1), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e2), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e3), (kernel_ulong_t)&spt_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa2e6), (kernel_ulong_t)&spt_uart_info },
mfd: intel-lpss: Add Intel Cannonlake PCI IDs Intel Cannonlake PCH has the same LPSS than Intel Kabylake. Add the new IDs to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-05-15 16:23:14 +08:00
/* CNL-H */
{ PCI_VDEVICE(INTEL, 0xa328), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa329), (kernel_ulong_t)&spt_uart_info },
{ PCI_VDEVICE(INTEL, 0xa32a), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa32b), (kernel_ulong_t)&spt_info },
{ PCI_VDEVICE(INTEL, 0xa347), (kernel_ulong_t)&spt_uart_info },
mfd: intel-lpss: Fix Intel Cannon Lake LPSS I2C input clock Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C. This incorrect input clock rate results too high I2C bus clock in case ACPI doesn't provide tuned I2C timing parameters since I2C host controller driver calculates them from input clock rate. Fix this by using the correct rate. We still share the same 230 ns SDA hold time value than Sunrisepoint. Cc: stable@vger.kernel.org Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Reported-by: Chris Chiu <chiu@endlessm.com> Reported-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-18 16:38:27 +08:00
{ PCI_VDEVICE(INTEL, 0xa368), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa369), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa36a), (kernel_ulong_t)&cnl_i2c_info },
{ PCI_VDEVICE(INTEL, 0xa36b), (kernel_ulong_t)&cnl_i2c_info },
mfd: intel-lpss: Keep device tables sorted by ID Easier to find and maintain if the device tables sorted by ID. Do it here for intel-lpss MFD driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-25 02:13:44 +08:00
{ PCI_VDEVICE(INTEL, 0xa37b), (kernel_ulong_t)&spt_info },
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 23:04:03 +08:00
{ }
};
MODULE_DEVICE_TABLE(pci, intel_lpss_pci_ids);
static struct pci_driver intel_lpss_pci_driver = {
.name = "intel-lpss",
.id_table = intel_lpss_pci_ids,
.probe = intel_lpss_pci_probe,
.remove = intel_lpss_pci_remove,
.driver = {
.pm = &intel_lpss_pci_pm_ops,
},
};
module_pci_driver(intel_lpss_pci_driver);
MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
MODULE_DESCRIPTION("Intel LPSS PCI driver");
MODULE_LICENSE("GPL v2");