UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/mach-bcm/Kconfig

92 lines
2.4 KiB
Plaintext
Raw Normal View History

Add support for generic BCM SoC chipsets In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20 01:46:10 +08:00
config ARCH_BCM
ARM: bcm: Restrict ARCH_BCM selection to ARCH_MULTI_V6_V7 Currently, Broadcom SoC options are shown whenever ARCH_MULTIPLATFORM is enabled. Restrict this so they are only seen when ARCH_MULTI_V6_V7 variants are enabled. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> [mporter: added commit log message] Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-01 16:26:19 +08:00
bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7
rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Olof Johansson <olof@lixom.net> Changes from v2: - switch ARCH_MULTIPLATFORM from select to depends - remove 'default y' from BCM_MOBILE Changes from v1: - fix alpha ordering in dts/Makefile - break into 4 patches for separate subsys
2013-09-24 01:20:33 +08:00
help
ARM: bcm: Restrict ARCH_BCM selection to ARCH_MULTI_V6_V7 Currently, Broadcom SoC options are shown whenever ARCH_MULTIPLATFORM is enabled. Restrict this so they are only seen when ARCH_MULTI_V6_V7 variants are enabled. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> [mporter: added commit log message] Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-01 16:26:19 +08:00
This enables support for Broadcom ARM based SoC chips
rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Olof Johansson <olof@lixom.net> Changes from v2: - switch ARCH_MULTIPLATFORM from select to depends - remove 'default y' from BCM_MOBILE Changes from v1: - fix alpha ordering in dts/Makefile - break into 4 patches for separate subsys
2013-09-24 01:20:33 +08:00
menu "Broadcom SoC Selection"
ARM: bcm: Restrict ARCH_BCM selection to ARCH_MULTI_V6_V7 Currently, Broadcom SoC options are shown whenever ARCH_MULTIPLATFORM is enabled. Restrict this so they are only seen when ARCH_MULTI_V6_V7 variants are enabled. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> [mporter: added commit log message] Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-01 16:26:19 +08:00
depends on ARCH_BCM
rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Olof Johansson <olof@lixom.net> Changes from v2: - switch ARCH_MULTIPLATFORM from select to depends - remove 'default y' from BCM_MOBILE Changes from v1: - fix alpha ordering in dts/Makefile - break into 4 patches for separate subsys
2013-09-24 01:20:33 +08:00
config ARCH_BCM_MOBILE
ARM: bcm: clean up config and build targets Currently CONFIG_ARCH_BCM_MOBILE is used to select all (both) Broadcom mobile SoC families. Instead, use that only as a config menu switch, and define specific symbols like ARCH_BCM_281XX to select a particular SoC family. If ARCH_BCM_MOBILE is selected, all of the SoCs will be selected by default, but this way each can be disabled individually as well. Note that BCM281xx and BCM21664 both require the SMC and L2 cache control code, so that code will be built based on ARCH_BCM_MOBILE. Signed-off-by: Alex Elder <elder@linaro.org> [mporter: added ARM: to the description] Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-15 20:37:19 +08:00
bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
Add support for generic BCM SoC chipsets In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20 01:46:10 +08:00
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
ARM: mach-bcm: add ARM_ERRATA_775420 ARM_ERRATA_775420 needs to be enabled. A data cache maintenance operation which aborts, followed by an ISB, without any DSB in-between, might lead to deadlock. Affects: bug present in Cortex-A9 r3p0 and earlier. Fixed in r4p0. Cortex-A9 r3p0 is used in a multitude of Broadcom parts including the bcm21664, bcm281xx, 5301x families of devices. Signed-off-by: Scott Branden <sbranden@broadcom.com> Tested-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-19 01:13:20 +08:00
select ARM_ERRATA_775420
Add support for generic BCM SoC chipsets In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20 01:46:10 +08:00
select ARM_GIC
ARM: bcm281xx: Enable GPIO driver Turn on the bcm281xx GPIO driver in the kernel configuration. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Christian Daudt <csd@broadcom.com>
2013-09-11 02:07:02 +08:00
select GPIO_BCM_KONA
Add support for generic BCM SoC chipsets In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20 01:46:10 +08:00
select TICK_ONESHOT
ARM: bcm281xx: Add ARCH Timers to config Add HAVE_ARM_ARCH_TIMER to Broadcom Kconfig as it is required for some Mobile SoCs. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Markus Mayer <mmayer@broadcom.com> Reviewed-by: Mark Hambleton <mahamble@broadcom.com> Reviewed-by: James King <jamesk@broadcom.com>
2013-09-25 04:20:52 +08:00
select HAVE_ARM_ARCH_TIMER
ARM: pinctrl: Add Broadcom Capri pinctrl driver Adds pinctrl driver for Broadcom Capri (BCM281xx) SoCs. v4: - PINCTRL selected in Kconfig, PINCTRL_CAPRI selected in bcm_defconfig - make use of regmap - change CAPRI_PIN_UPDATE from macro to inline function. - Handle pull-up strength arg in Ohm instead of enum v3: Re-work driver to be based on generic pin config. Moved config selection from Kconfig to bcm_defconfig. v2: Use hyphens instead of underscore in DT property names. Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-21 10:13:35 +08:00
select PINCTRL
Add support for generic BCM SoC chipsets In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20 01:46:10 +08:00
help
rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Olof Johansson <olof@lixom.net> Changes from v2: - switch ARCH_MULTIPLATFORM from select to depends - remove 'default y' from BCM_MOBILE Changes from v1: - fix alpha ordering in dts/Makefile - break into 4 patches for separate subsys
2013-09-24 01:20:33 +08:00
This enables support for systems based on Broadcom mobile SoCs.
ARM: bcm: clean up config and build targets Currently CONFIG_ARCH_BCM_MOBILE is used to select all (both) Broadcom mobile SoC families. Instead, use that only as a config menu switch, and define specific symbols like ARCH_BCM_281XX to select a particular SoC family. If ARCH_BCM_MOBILE is selected, all of the SoCs will be selected by default, but this way each can be disabled individually as well. Note that BCM281xx and BCM21664 both require the SMC and L2 cache control code, so that code will be built based on ARCH_BCM_MOBILE. Signed-off-by: Alex Elder <elder@linaro.org> [mporter: added ARM: to the description] Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-15 20:37:19 +08:00
if ARCH_BCM_MOBILE
menu "Broadcom Mobile SoC Selection"
config ARCH_BCM_281XX
bool "Broadcom BCM281XX SoC family"
default y
help
Enable support for the the BCM281XX family, which includes
BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155
variants.
config ARCH_BCM_21664
bool "Broadcom BCM21664 SoC family"
default y
help
Enable support for the the BCM21664 family, which includes
BCM21663 and BCM21664 variants.
ARM: bcm: config option for l2 cache support Add a new config option ARCH_BCM_MOBILE_L2_CACHE that allows support for level-2 cache to be enabled or disabled at build time for BCM218XX and BCM21664 family SoCs. Build support for SMC only if it's required (currently it's only required for to support level 2 cache control). If arch/arm/mach-bcm/kona.c gets compiled, ARCH_BCM_MOBILE_L2_CACHE must have been selected, which implies CONFIG_CACHE_L2X0 is set. There is therefore no need to check CONFIG_CACHE_L2X0 at the top of kona_l2_cache_init(), so get rid of that check. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-22 05:53:07 +08:00
config ARCH_BCM_MOBILE_L2_CACHE
bool "Broadcom mobile SoC level 2 cache support"
depends on (ARCH_BCM_281XX || ARCH_BCM_21664)
default y
select CACHE_L2X0
select ARCH_BCM_MOBILE_SMC
config ARCH_BCM_MOBILE_SMC
bool
depends on ARCH_BCM_281XX || ARCH_BCM_21664
ARM: bcm: clean up config and build targets Currently CONFIG_ARCH_BCM_MOBILE is used to select all (both) Broadcom mobile SoC families. Instead, use that only as a config menu switch, and define specific symbols like ARCH_BCM_281XX to select a particular SoC family. If ARCH_BCM_MOBILE is selected, all of the SoCs will be selected by default, but this way each can be disabled individually as well. Note that BCM281xx and BCM21664 both require the SMC and L2 cache control code, so that code will be built based on ARCH_BCM_MOBILE. Signed-off-by: Alex Elder <elder@linaro.org> [mporter: added ARM: to the description] Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-15 20:37:19 +08:00
endmenu
endif
rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Olof Johansson <olof@lixom.net> Changes from v2: - switch ARCH_MULTIPLATFORM from select to depends - remove 'default y' from BCM_MOBILE Changes from v1: - fix alpha ordering in dts/Makefile - break into 4 patches for separate subsys
2013-09-24 01:20:33 +08:00
ARM: bcm2835: Move to mach-bcm directory Move the bcm2835 board file into the mach-bcm directory. This allows us to get rid of the mach-bcm2835 directory with the associated Kconfig and Makefile. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> [swarren, adjust defconfig so ARCH_BCM2835 still gets enabled] Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2014-02-21 08:16:11 +08:00
config ARCH_BCM2835
bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_411920
select ARM_TIMER_SP804
select CLKSRC_OF
select PINCTRL
select PINCTRL_BCM2835
help
This enables support for the Broadcom BCM2835 SoC. This SoC is
used in the Raspberry Pi and Roku 2 devices.
ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU This patch adds support for the BCM5301X/BCM470X SoCs with an ARM CPUs. Currently just booting to a shell is working and nothing else, no Ethernet, wifi, flash, ... I have some pending patches to make Ethernet work for this device. Mostly device tree support for bcma is missing. This SoC is used in small office and home router with Broadcom SoCs it's internal name is Northstar. This code should support the BCM4707, BCM4708, BCM4709, BCM53010, BCM53011 and BCM53012 SoC. It uses one or two ARM Cortex A9 Cores, some highlights are 2 PCIe 2.0 controllers, 4 Gigabit Ethernet MACs and a USB 3.0 host controller. This SoC uses a dual core CPU, but this is currently not implemented. More information about this SoC can be found here: http://www.anandtech.com/show/5925/broadcom-announces-bcm4708x-and-bcm5301x-socs-for-80211ac-routers Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-04 07:01:43 +08:00
config ARCH_BCM_5301X
bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
select ARM_GIC
select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
help
Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
This is a network SoC line mostly used in home routers and
wifi access points, it's internal name is Northstar.
This inclused the following SoC: BCM53010, BCM53011, BCM53012,
BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
BCM4708 and BCM4709.
Do not confuse this with the BCM4760 which is a totally
different SoC or with the older BCM47XX and BCM53XX based
network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Olof Johansson <olof@lixom.net> Changes from v2: - switch ARCH_MULTIPLATFORM from select to depends - remove 'default y' from BCM_MOBILE Changes from v1: - fix alpha ordering in dts/Makefile - break into 4 patches for separate subsys
2013-09-24 01:20:33 +08:00
endmenu