UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/fs/btrfs/async-thread.h

53 lines
1.8 KiB
C
Raw Normal View History

Btrfs: Add async worker threads for pre and post IO checksumming Btrfs has been using workqueues to spread the checksumming load across other CPUs in the system. But, workqueues only schedule work on the same CPU that queued the work, giving them a limited benefit for systems with higher CPU counts. This code adds a generic facility to schedule work with pools of kthreads, and changes the bio submission code to queue bios up. The queueing is important to make sure large numbers of procs on the system don't turn streaming workloads into random workloads by sending IO down concurrently. The end result of all of this is much higher performance (and CPU usage) when doing checksumming on large machines. Two worker pools are created, one for writes and one for endio processing. The two could deadlock if we tried to service both from a single pool. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-06-12 04:50:36 +08:00
/*
* Copyright (C) 2007 Oracle. All rights reserved.
btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue Use kernel workqueue to implement a new btrfs_workqueue_struct, which has the ordering execution feature like the btrfs_worker. The func is executed in a concurrency way, and the ordred_func/ordered_free is executed in the sequence them are queued after the corresponding func is done. The new btrfs_workqueue works much like the original one, one workqueue for normal work and a list for ordered work. When a work is queued, ordered work will be added to the list and helper function will be queued into the workqueue. The helper function will execute a normal work and then check and execute as many ordered work as possible in the sequence they were queued. At this patch, high priority work queue or thresholding is not added yet. The high priority feature and thresholding will be added in the following patches. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:03 +08:00
* Copyright (C) 2014 Fujitsu. All rights reserved.
Btrfs: Add async worker threads for pre and post IO checksumming Btrfs has been using workqueues to spread the checksumming load across other CPUs in the system. But, workqueues only schedule work on the same CPU that queued the work, giving them a limited benefit for systems with higher CPU counts. This code adds a generic facility to schedule work with pools of kthreads, and changes the bio submission code to queue bios up. The queueing is important to make sure large numbers of procs on the system don't turn streaming workloads into random workloads by sending IO down concurrently. The end result of all of this is much higher performance (and CPU usage) when doing checksumming on large machines. Two worker pools are created, one for writes and one for endio processing. The two could deadlock if we tried to service both from a single pool. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-06-12 04:50:36 +08:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License v2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 021110-1307, USA.
*/
#ifndef __BTRFS_ASYNC_THREAD_
#define __BTRFS_ASYNC_THREAD_
btrfs: Cleanup the "_struct" suffix in btrfs_workequeue Since the "_struct" suffix is mainly used for distinguish the differnt btrfs_work between the original and the newly created one, there is no need using the suffix since all btrfs_workers are changed into btrfs_workqueue. Also this patch fixed some codes whose code style is changed due to the too long "_struct" suffix. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:19 +08:00
struct btrfs_workqueue;
btrfs: Add high priority workqueue support for btrfs_workqueue_struct Add high priority function to btrfs_workqueue. This is implemented by embedding a btrfs_workqueue into a btrfs_workqueue and use some helper functions to differ the normal priority wq and high priority wq. So the high priority wq is completely independent from the normal workqueue. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:04 +08:00
/* Internal use only */
btrfs: Cleanup the "_struct" suffix in btrfs_workequeue Since the "_struct" suffix is mainly used for distinguish the differnt btrfs_work between the original and the newly created one, there is no need using the suffix since all btrfs_workers are changed into btrfs_workqueue. Also this patch fixed some codes whose code style is changed due to the too long "_struct" suffix. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:19 +08:00
struct __btrfs_workqueue;
btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue Use kernel workqueue to implement a new btrfs_workqueue_struct, which has the ordering execution feature like the btrfs_worker. The func is executed in a concurrency way, and the ordred_func/ordered_free is executed in the sequence them are queued after the corresponding func is done. The new btrfs_workqueue works much like the original one, one workqueue for normal work and a list for ordered work. When a work is queued, ordered work will be added to the list and helper function will be queued into the workqueue. The helper function will execute a normal work and then check and execute as many ordered work as possible in the sequence they were queued. At this patch, high priority work queue or thresholding is not added yet. The high priority feature and thresholding will be added in the following patches. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:03 +08:00
btrfs: Cleanup the "_struct" suffix in btrfs_workequeue Since the "_struct" suffix is mainly used for distinguish the differnt btrfs_work between the original and the newly created one, there is no need using the suffix since all btrfs_workers are changed into btrfs_workqueue. Also this patch fixed some codes whose code style is changed due to the too long "_struct" suffix. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:19 +08:00
struct btrfs_work {
void (*func)(struct btrfs_work *arg);
void (*ordered_func)(struct btrfs_work *arg);
void (*ordered_free)(struct btrfs_work *arg);
btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue Use kernel workqueue to implement a new btrfs_workqueue_struct, which has the ordering execution feature like the btrfs_worker. The func is executed in a concurrency way, and the ordred_func/ordered_free is executed in the sequence them are queued after the corresponding func is done. The new btrfs_workqueue works much like the original one, one workqueue for normal work and a list for ordered work. When a work is queued, ordered work will be added to the list and helper function will be queued into the workqueue. The helper function will execute a normal work and then check and execute as many ordered work as possible in the sequence they were queued. At this patch, high priority work queue or thresholding is not added yet. The high priority feature and thresholding will be added in the following patches. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:03 +08:00
/* Don't touch things below */
struct work_struct normal_work;
struct list_head ordered_list;
btrfs: Cleanup the "_struct" suffix in btrfs_workequeue Since the "_struct" suffix is mainly used for distinguish the differnt btrfs_work between the original and the newly created one, there is no need using the suffix since all btrfs_workers are changed into btrfs_workqueue. Also this patch fixed some codes whose code style is changed due to the too long "_struct" suffix. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:19 +08:00
struct __btrfs_workqueue *wq;
btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue Use kernel workqueue to implement a new btrfs_workqueue_struct, which has the ordering execution feature like the btrfs_worker. The func is executed in a concurrency way, and the ordred_func/ordered_free is executed in the sequence them are queued after the corresponding func is done. The new btrfs_workqueue works much like the original one, one workqueue for normal work and a list for ordered work. When a work is queued, ordered work will be added to the list and helper function will be queued into the workqueue. The helper function will execute a normal work and then check and execute as many ordered work as possible in the sequence they were queued. At this patch, high priority work queue or thresholding is not added yet. The high priority feature and thresholding will be added in the following patches. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:03 +08:00
unsigned long flags;
};
btrfs: Cleanup the "_struct" suffix in btrfs_workequeue Since the "_struct" suffix is mainly used for distinguish the differnt btrfs_work between the original and the newly created one, there is no need using the suffix since all btrfs_workers are changed into btrfs_workqueue. Also this patch fixed some codes whose code style is changed due to the too long "_struct" suffix. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:19 +08:00
struct btrfs_workqueue *btrfs_alloc_workqueue(char *name,
btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue Use kernel workqueue to implement a new btrfs_workqueue_struct, which has the ordering execution feature like the btrfs_worker. The func is executed in a concurrency way, and the ordred_func/ordered_free is executed in the sequence them are queued after the corresponding func is done. The new btrfs_workqueue works much like the original one, one workqueue for normal work and a list for ordered work. When a work is queued, ordered work will be added to the list and helper function will be queued into the workqueue. The helper function will execute a normal work and then check and execute as many ordered work as possible in the sequence they were queued. At this patch, high priority work queue or thresholding is not added yet. The high priority feature and thresholding will be added in the following patches. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:03 +08:00
int flags,
btrfs: Add threshold workqueue based on kernel workqueue The original btrfs_workers has thresholding functions to dynamically create or destroy kthreads. Though there is no such function in kernel workqueue because the worker is not created manually, we can still use the workqueue_set_max_active to simulated the behavior, mainly to achieve a better HDD performance by setting a high threshold on submit_workers. (Sadly, no resource can be saved) So in this patch, extra workqueue pending counters are introduced to dynamically change the max active of each btrfs_workqueue_struct, hoping to restore the behavior of the original thresholding function. Also, workqueue_set_max_active use a mutex to protect workqueue_struct, which is not meant to be called too frequently, so a new interval mechanism is applied, that will only call workqueue_set_max_active after a count of work is queued. Hoping to balance both the random and sequence performance on HDD. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:05 +08:00
int max_active,
int thresh);
btrfs: Cleanup the "_struct" suffix in btrfs_workequeue Since the "_struct" suffix is mainly used for distinguish the differnt btrfs_work between the original and the newly created one, there is no need using the suffix since all btrfs_workers are changed into btrfs_workqueue. Also this patch fixed some codes whose code style is changed due to the too long "_struct" suffix. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-02-28 10:46:19 +08:00
void btrfs_init_work(struct btrfs_work *work,
void (*func)(struct btrfs_work *),
void (*ordered_func)(struct btrfs_work *),
void (*ordered_free)(struct btrfs_work *));
void btrfs_queue_work(struct btrfs_workqueue *wq,
struct btrfs_work *work);
void btrfs_destroy_workqueue(struct btrfs_workqueue *wq);
void btrfs_workqueue_set_max(struct btrfs_workqueue *wq, int max);
void btrfs_set_work_high_priority(struct btrfs_work *work);
Btrfs: Add async worker threads for pre and post IO checksumming Btrfs has been using workqueues to spread the checksumming load across other CPUs in the system. But, workqueues only schedule work on the same CPU that queued the work, giving them a limited benefit for systems with higher CPU counts. This code adds a generic facility to schedule work with pools of kthreads, and changes the bio submission code to queue bios up. The queueing is important to make sure large numbers of procs on the system don't turn streaming workloads into random workloads by sending IO down concurrently. The end result of all of this is much higher performance (and CPU usage) when doing checksumming on large machines. Two worker pools are created, one for writes and one for endio processing. The two could deadlock if we tried to service both from a single pool. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-06-12 04:50:36 +08:00
#endif