OpenCloudOS-Kernel/drivers/net/wireless/ath/ath6kl/core.c

366 lines
9.1 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004-2011 Atheros Communications Inc.
* Copyright (c) 2011-2012 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "core.h"
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/export.h>
#include <linux/vmalloc.h>
#include "debug.h"
#include "hif-ops.h"
#include "htc-ops.h"
#include "cfg80211.h"
unsigned int debug_mask;
static unsigned int suspend_mode;
static unsigned int wow_mode;
static unsigned int uart_debug;
static unsigned int uart_rate = 115200;
static unsigned int ath6kl_p2p;
static unsigned int testmode;
static unsigned int recovery_enable;
static unsigned int heart_beat_poll;
module_param(debug_mask, uint, 0644);
module_param(suspend_mode, uint, 0644);
module_param(wow_mode, uint, 0644);
module_param(uart_debug, uint, 0644);
module_param(uart_rate, uint, 0644);
module_param(ath6kl_p2p, uint, 0644);
module_param(testmode, uint, 0644);
module_param(recovery_enable, uint, 0644);
module_param(heart_beat_poll, uint, 0644);
MODULE_PARM_DESC(recovery_enable, "Enable recovery from firmware error");
MODULE_PARM_DESC(heart_beat_poll,
"Enable fw error detection periodic polling in msecs - Also set recovery_enable for this to be effective");
void ath6kl_core_tx_complete(struct ath6kl *ar, struct sk_buff *skb)
{
ath6kl_htc_tx_complete(ar, skb);
}
EXPORT_SYMBOL(ath6kl_core_tx_complete);
void ath6kl_core_rx_complete(struct ath6kl *ar, struct sk_buff *skb, u8 pipe)
{
ath6kl_htc_rx_complete(ar, skb, pipe);
}
EXPORT_SYMBOL(ath6kl_core_rx_complete);
int ath6kl_core_init(struct ath6kl *ar, enum ath6kl_htc_type htc_type)
{
struct ath6kl_bmi_target_info targ_info;
struct wireless_dev *wdev;
int ret = 0, i;
switch (htc_type) {
case ATH6KL_HTC_TYPE_MBOX:
ath6kl_htc_mbox_attach(ar);
break;
case ATH6KL_HTC_TYPE_PIPE:
ath6kl_htc_pipe_attach(ar);
break;
default:
WARN_ON(1);
return -ENOMEM;
}
ar->ath6kl_wq = create_singlethread_workqueue("ath6kl");
if (!ar->ath6kl_wq)
return -ENOMEM;
ret = ath6kl_bmi_init(ar);
if (ret)
goto err_wq;
/*
* Turn on power to get hardware (target) version and leave power
* on delibrately as we will boot the hardware anyway within few
* seconds.
*/
ret = ath6kl_hif_power_on(ar);
if (ret)
goto err_bmi_cleanup;
ret = ath6kl_bmi_get_target_info(ar, &targ_info);
if (ret)
goto err_power_off;
ar->version.target_ver = le32_to_cpu(targ_info.version);
ar->target_type = le32_to_cpu(targ_info.type);
ar->wiphy->hw_version = le32_to_cpu(targ_info.version);
ret = ath6kl_init_hw_params(ar);
if (ret)
goto err_power_off;
ar->htc_target = ath6kl_htc_create(ar);
if (!ar->htc_target) {
ret = -ENOMEM;
goto err_power_off;
}
ar->testmode = testmode;
ret = ath6kl_init_fetch_firmwares(ar);
if (ret)
goto err_htc_cleanup;
/* FIXME: we should free all firmwares in the error cases below */
/*
* Backwards compatibility support for older ar6004 firmware images
* which do not set these feature flags.
*/
if (ar->target_type == TARGET_TYPE_AR6004 &&
ar->fw_api <= 4) {
__set_bit(ATH6KL_FW_CAPABILITY_64BIT_RATES,
ar->fw_capabilities);
__set_bit(ATH6KL_FW_CAPABILITY_AP_INACTIVITY_MINS,
ar->fw_capabilities);
if (ar->hw.id == AR6004_HW_1_3_VERSION)
__set_bit(ATH6KL_FW_CAPABILITY_MAP_LP_ENDPOINT,
ar->fw_capabilities);
}
/* Indicate that WMI is enabled (although not ready yet) */
set_bit(WMI_ENABLED, &ar->flag);
ar->wmi = ath6kl_wmi_init(ar);
if (!ar->wmi) {
ath6kl_err("failed to initialize wmi\n");
ret = -EIO;
goto err_htc_cleanup;
}
ath6kl_dbg(ATH6KL_DBG_TRC, "%s: got wmi @ 0x%p.\n", __func__, ar->wmi);
/* setup access class priority mappings */
ar->ac_stream_pri_map[WMM_AC_BK] = 0; /* lowest */
ar->ac_stream_pri_map[WMM_AC_BE] = 1;
ar->ac_stream_pri_map[WMM_AC_VI] = 2;
ar->ac_stream_pri_map[WMM_AC_VO] = 3; /* highest */
/* allocate some buffers that handle larger AMSDU frames */
ath6kl_refill_amsdu_rxbufs(ar, ATH6KL_MAX_AMSDU_RX_BUFFERS);
ath6kl_cookie_init(ar);
ar->conf_flags = ATH6KL_CONF_IGNORE_ERP_BARKER |
ATH6KL_CONF_ENABLE_11N | ATH6KL_CONF_ENABLE_TX_BURST;
if (suspend_mode &&
suspend_mode >= WLAN_POWER_STATE_CUT_PWR &&
suspend_mode <= WLAN_POWER_STATE_WOW)
ar->suspend_mode = suspend_mode;
else
ar->suspend_mode = 0;
if (suspend_mode == WLAN_POWER_STATE_WOW &&
(wow_mode == WLAN_POWER_STATE_CUT_PWR ||
wow_mode == WLAN_POWER_STATE_DEEP_SLEEP))
ar->wow_suspend_mode = wow_mode;
else
ar->wow_suspend_mode = 0;
if (uart_debug)
ar->conf_flags |= ATH6KL_CONF_UART_DEBUG;
ar->hw.uarttx_rate = uart_rate;
set_bit(FIRST_BOOT, &ar->flag);
ath6kl: Fix kernel panic while receiving fwlog during boot "ath6kl: Defer wiphy and netdev registration till the end of ath6kl_core_init()" causes kernel panic by accessing the unallocated debug resources during boot time. To fix this, split the debug initialization funtion into two, one initializes the debug resource and the other takes care of debugfs initialization. When this issue shows up the kernel crash dump would look like ath6kl_debug_fwlog_event+0x9c/0x10a [<c10666c9>] register_lock_class+0x57/0x288 [<c1065cd3>] ? trace_hardirqs_on+0xb/0xd [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c1066a8a>] __lock_acquire+0x96/0xbe5 [<c106007b>] ? alarmtimer_suspend+0x80/0x127 [<c10258da>] ? vprintk+0x394/0x3b1 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c10676b3>] lock_acquire+0xda/0xf9 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c1532ce3>] _raw_spin_lock+0x28/0x58 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<f801f4c9>] ath6kl_debug_fwlog_event+0x9c/0x10a [<f80310a4>] ath6kl_wmi_control_rx+0x69d/0xb50 [ath6kl_core] [<f802d2e1>] ? ath6kl_rx+0x3c/0x839 [ath6kl_core] [<f802d35d>] ath6kl_rx+0xb8/0x839 [ath6kl_core] [<c104b81e>] ? local_clock+0x2d/0x4e [<c102a0af>] ? _local_bh_enable_ip+0x94/0x98 [<f802bfc0>] ? ath6kl_alloc_amsdu_rxbuf+0xb7/0xb7 [<f8023b28>] ath6kl_htc_rxmsg_pending_handler+0x891/0x988 [ath6kl_core] [<f802bf00>] ? ath6kl_refill_amsdu_rxbufs+0x89/0x92 [<f802d2a5>] ? aggr_timeout+0xed/0xed [ath6kl_core] [<f802bfc0>] ? ath6kl_alloc_amsdu_rxbuf+0xb7/0xb7 [<f802c420>] ? ath6kl_tx_complete+0x376/0x376 [ath6kl_core] [<f8020e92>] ath6kl_hif_intr_bh_handler+0xf7/0x33e [<c138ab00>] ? mmc_host_disable+0x15/0x3a [<f8123b5c>] ath6kl_sdio_irq_handler+0x3c/0x90 [ath6kl_sdio] [<c1392f56>] sdio_irq_thread+0xb6/0x29c [<c1392ea0>] ? sdio_claim_irq+0x1cb/0x1cb [<c103d4c0>] kthread+0x67/0x6c [<c103d459>] ? __init_kthread_worker+0x42/0x42 [<c153903a>] kernel_thread_helper+0x6/0xd BUG: unable to handle kernel NULL pointer dereference at EIP: [<f801f4d4>] ath6kl_debug_fwlog_event+0xa7/0x10a kvalo: rename new function to ath6kl_debug_init_fs() and add a comment why it's needed Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-06 17:09:40 +08:00
ath6kl_debug_init(ar);
ret = ath6kl_init_hw_start(ar);
if (ret) {
ath6kl_err("Failed to start hardware: %d\n", ret);
goto err_rxbuf_cleanup;
}
/* give our connected endpoints some buffers */
ath6kl_rx_refill(ar->htc_target, ar->ctrl_ep);
ath6kl_rx_refill(ar->htc_target, ar->ac2ep_map[WMM_AC_BE]);
ret = ath6kl_cfg80211_init(ar);
if (ret)
goto err_rxbuf_cleanup;
ath6kl: Fix kernel panic while receiving fwlog during boot "ath6kl: Defer wiphy and netdev registration till the end of ath6kl_core_init()" causes kernel panic by accessing the unallocated debug resources during boot time. To fix this, split the debug initialization funtion into two, one initializes the debug resource and the other takes care of debugfs initialization. When this issue shows up the kernel crash dump would look like ath6kl_debug_fwlog_event+0x9c/0x10a [<c10666c9>] register_lock_class+0x57/0x288 [<c1065cd3>] ? trace_hardirqs_on+0xb/0xd [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c1066a8a>] __lock_acquire+0x96/0xbe5 [<c106007b>] ? alarmtimer_suspend+0x80/0x127 [<c10258da>] ? vprintk+0x394/0x3b1 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c10676b3>] lock_acquire+0xda/0xf9 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c1532ce3>] _raw_spin_lock+0x28/0x58 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<f801f4c9>] ath6kl_debug_fwlog_event+0x9c/0x10a [<f80310a4>] ath6kl_wmi_control_rx+0x69d/0xb50 [ath6kl_core] [<f802d2e1>] ? ath6kl_rx+0x3c/0x839 [ath6kl_core] [<f802d35d>] ath6kl_rx+0xb8/0x839 [ath6kl_core] [<c104b81e>] ? local_clock+0x2d/0x4e [<c102a0af>] ? _local_bh_enable_ip+0x94/0x98 [<f802bfc0>] ? ath6kl_alloc_amsdu_rxbuf+0xb7/0xb7 [<f8023b28>] ath6kl_htc_rxmsg_pending_handler+0x891/0x988 [ath6kl_core] [<f802bf00>] ? ath6kl_refill_amsdu_rxbufs+0x89/0x92 [<f802d2a5>] ? aggr_timeout+0xed/0xed [ath6kl_core] [<f802bfc0>] ? ath6kl_alloc_amsdu_rxbuf+0xb7/0xb7 [<f802c420>] ? ath6kl_tx_complete+0x376/0x376 [ath6kl_core] [<f8020e92>] ath6kl_hif_intr_bh_handler+0xf7/0x33e [<c138ab00>] ? mmc_host_disable+0x15/0x3a [<f8123b5c>] ath6kl_sdio_irq_handler+0x3c/0x90 [ath6kl_sdio] [<c1392f56>] sdio_irq_thread+0xb6/0x29c [<c1392ea0>] ? sdio_claim_irq+0x1cb/0x1cb [<c103d4c0>] kthread+0x67/0x6c [<c103d459>] ? __init_kthread_worker+0x42/0x42 [<c153903a>] kernel_thread_helper+0x6/0xd BUG: unable to handle kernel NULL pointer dereference at EIP: [<f801f4d4>] ath6kl_debug_fwlog_event+0xa7/0x10a kvalo: rename new function to ath6kl_debug_init_fs() and add a comment why it's needed Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-06 17:09:40 +08:00
ret = ath6kl_debug_init_fs(ar);
if (ret) {
wiphy_unregister(ar->wiphy);
goto err_rxbuf_cleanup;
}
for (i = 0; i < ar->vif_max; i++)
ar->avail_idx_map |= BIT(i);
rtnl_lock();
/* Add an initial station interface */
wdev = ath6kl_interface_add(ar, "wlan%d", NET_NAME_ENUM,
NL80211_IFTYPE_STATION, 0, INFRA_NETWORK);
rtnl_unlock();
if (!wdev) {
ath6kl_err("Failed to instantiate a network device\n");
ret = -ENOMEM;
wiphy_unregister(ar->wiphy);
ath6kl: Fix kernel panic while receiving fwlog during boot "ath6kl: Defer wiphy and netdev registration till the end of ath6kl_core_init()" causes kernel panic by accessing the unallocated debug resources during boot time. To fix this, split the debug initialization funtion into two, one initializes the debug resource and the other takes care of debugfs initialization. When this issue shows up the kernel crash dump would look like ath6kl_debug_fwlog_event+0x9c/0x10a [<c10666c9>] register_lock_class+0x57/0x288 [<c1065cd3>] ? trace_hardirqs_on+0xb/0xd [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c1066a8a>] __lock_acquire+0x96/0xbe5 [<c106007b>] ? alarmtimer_suspend+0x80/0x127 [<c10258da>] ? vprintk+0x394/0x3b1 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c10676b3>] lock_acquire+0xda/0xf9 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c1532ce3>] _raw_spin_lock+0x28/0x58 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<f801f4c9>] ath6kl_debug_fwlog_event+0x9c/0x10a [<f80310a4>] ath6kl_wmi_control_rx+0x69d/0xb50 [ath6kl_core] [<f802d2e1>] ? ath6kl_rx+0x3c/0x839 [ath6kl_core] [<f802d35d>] ath6kl_rx+0xb8/0x839 [ath6kl_core] [<c104b81e>] ? local_clock+0x2d/0x4e [<c102a0af>] ? _local_bh_enable_ip+0x94/0x98 [<f802bfc0>] ? ath6kl_alloc_amsdu_rxbuf+0xb7/0xb7 [<f8023b28>] ath6kl_htc_rxmsg_pending_handler+0x891/0x988 [ath6kl_core] [<f802bf00>] ? ath6kl_refill_amsdu_rxbufs+0x89/0x92 [<f802d2a5>] ? aggr_timeout+0xed/0xed [ath6kl_core] [<f802bfc0>] ? ath6kl_alloc_amsdu_rxbuf+0xb7/0xb7 [<f802c420>] ? ath6kl_tx_complete+0x376/0x376 [ath6kl_core] [<f8020e92>] ath6kl_hif_intr_bh_handler+0xf7/0x33e [<c138ab00>] ? mmc_host_disable+0x15/0x3a [<f8123b5c>] ath6kl_sdio_irq_handler+0x3c/0x90 [ath6kl_sdio] [<c1392f56>] sdio_irq_thread+0xb6/0x29c [<c1392ea0>] ? sdio_claim_irq+0x1cb/0x1cb [<c103d4c0>] kthread+0x67/0x6c [<c103d459>] ? __init_kthread_worker+0x42/0x42 [<c153903a>] kernel_thread_helper+0x6/0xd BUG: unable to handle kernel NULL pointer dereference at EIP: [<f801f4d4>] ath6kl_debug_fwlog_event+0xa7/0x10a kvalo: rename new function to ath6kl_debug_init_fs() and add a comment why it's needed Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-06 17:09:40 +08:00
goto err_rxbuf_cleanup;
}
ath6kl_dbg(ATH6KL_DBG_TRC, "%s: name=%s dev=0x%p, ar=0x%p\n",
__func__, wdev->netdev->name, wdev->netdev, ar);
ar->fw_recovery.enable = !!recovery_enable;
if (!ar->fw_recovery.enable)
return ret;
if (heart_beat_poll &&
test_bit(ATH6KL_FW_CAPABILITY_HEART_BEAT_POLL,
ar->fw_capabilities))
ar->fw_recovery.hb_poll = heart_beat_poll;
ath6kl_recovery_init(ar);
return ret;
err_rxbuf_cleanup:
ath6kl: Fix kernel panic while receiving fwlog during boot "ath6kl: Defer wiphy and netdev registration till the end of ath6kl_core_init()" causes kernel panic by accessing the unallocated debug resources during boot time. To fix this, split the debug initialization funtion into two, one initializes the debug resource and the other takes care of debugfs initialization. When this issue shows up the kernel crash dump would look like ath6kl_debug_fwlog_event+0x9c/0x10a [<c10666c9>] register_lock_class+0x57/0x288 [<c1065cd3>] ? trace_hardirqs_on+0xb/0xd [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c1066a8a>] __lock_acquire+0x96/0xbe5 [<c106007b>] ? alarmtimer_suspend+0x80/0x127 [<c10258da>] ? vprintk+0x394/0x3b1 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c10676b3>] lock_acquire+0xda/0xf9 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<c1532ce3>] _raw_spin_lock+0x28/0x58 [<f801f4c9>] ? ath6kl_debug_fwlog_event+0x9c/0x10a [<f801f4c9>] ath6kl_debug_fwlog_event+0x9c/0x10a [<f80310a4>] ath6kl_wmi_control_rx+0x69d/0xb50 [ath6kl_core] [<f802d2e1>] ? ath6kl_rx+0x3c/0x839 [ath6kl_core] [<f802d35d>] ath6kl_rx+0xb8/0x839 [ath6kl_core] [<c104b81e>] ? local_clock+0x2d/0x4e [<c102a0af>] ? _local_bh_enable_ip+0x94/0x98 [<f802bfc0>] ? ath6kl_alloc_amsdu_rxbuf+0xb7/0xb7 [<f8023b28>] ath6kl_htc_rxmsg_pending_handler+0x891/0x988 [ath6kl_core] [<f802bf00>] ? ath6kl_refill_amsdu_rxbufs+0x89/0x92 [<f802d2a5>] ? aggr_timeout+0xed/0xed [ath6kl_core] [<f802bfc0>] ? ath6kl_alloc_amsdu_rxbuf+0xb7/0xb7 [<f802c420>] ? ath6kl_tx_complete+0x376/0x376 [ath6kl_core] [<f8020e92>] ath6kl_hif_intr_bh_handler+0xf7/0x33e [<c138ab00>] ? mmc_host_disable+0x15/0x3a [<f8123b5c>] ath6kl_sdio_irq_handler+0x3c/0x90 [ath6kl_sdio] [<c1392f56>] sdio_irq_thread+0xb6/0x29c [<c1392ea0>] ? sdio_claim_irq+0x1cb/0x1cb [<c103d4c0>] kthread+0x67/0x6c [<c103d459>] ? __init_kthread_worker+0x42/0x42 [<c153903a>] kernel_thread_helper+0x6/0xd BUG: unable to handle kernel NULL pointer dereference at EIP: [<f801f4d4>] ath6kl_debug_fwlog_event+0xa7/0x10a kvalo: rename new function to ath6kl_debug_init_fs() and add a comment why it's needed Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-06 17:09:40 +08:00
ath6kl_debug_cleanup(ar);
ath6kl_htc_flush_rx_buf(ar->htc_target);
ath6kl_cleanup_amsdu_rxbufs(ar);
ath6kl_wmi_shutdown(ar->wmi);
clear_bit(WMI_ENABLED, &ar->flag);
ar->wmi = NULL;
err_htc_cleanup:
ath6kl_htc_cleanup(ar->htc_target);
err_power_off:
ath6kl_hif_power_off(ar);
err_bmi_cleanup:
ath6kl_bmi_cleanup(ar);
err_wq:
destroy_workqueue(ar->ath6kl_wq);
return ret;
}
EXPORT_SYMBOL(ath6kl_core_init);
struct ath6kl *ath6kl_core_create(struct device *dev)
{
struct ath6kl *ar;
u8 ctr;
ar = ath6kl_cfg80211_create();
if (!ar)
return NULL;
ar->p2p = !!ath6kl_p2p;
ar->dev = dev;
ar->vif_max = 1;
ar->max_norm_iface = 1;
spin_lock_init(&ar->lock);
spin_lock_init(&ar->mcastpsq_lock);
spin_lock_init(&ar->list_lock);
init_waitqueue_head(&ar->event_wq);
sema_init(&ar->sem, 1);
INIT_LIST_HEAD(&ar->amsdu_rx_buffer_queue);
INIT_LIST_HEAD(&ar->vif_list);
clear_bit(WMI_ENABLED, &ar->flag);
clear_bit(SKIP_SCAN, &ar->flag);
clear_bit(DESTROY_IN_PROGRESS, &ar->flag);
ar->tx_pwr = 0;
ar->intra_bss = 1;
ar->lrssi_roam_threshold = DEF_LRSSI_ROAM_THRESHOLD;
ar->state = ATH6KL_STATE_OFF;
memset((u8 *)ar->sta_list, 0,
AP_MAX_NUM_STA * sizeof(struct ath6kl_sta));
/* Init the PS queues */
for (ctr = 0; ctr < AP_MAX_NUM_STA; ctr++) {
spin_lock_init(&ar->sta_list[ctr].psq_lock);
skb_queue_head_init(&ar->sta_list[ctr].psq);
skb_queue_head_init(&ar->sta_list[ctr].apsdq);
ar->sta_list[ctr].mgmt_psq_len = 0;
INIT_LIST_HEAD(&ar->sta_list[ctr].mgmt_psq);
ar->sta_list[ctr].aggr_conn =
kzalloc(sizeof(struct aggr_info_conn), GFP_KERNEL);
if (!ar->sta_list[ctr].aggr_conn) {
ath6kl_err("Failed to allocate memory for sta aggregation information\n");
ath6kl_core_destroy(ar);
return NULL;
}
}
skb_queue_head_init(&ar->mcastpsq);
memcpy(ar->ap_country_code, DEF_AP_COUNTRY_CODE, 3);
return ar;
}
EXPORT_SYMBOL(ath6kl_core_create);
void ath6kl_core_cleanup(struct ath6kl *ar)
{
ath6kl_hif_power_off(ar);
ath6kl_recovery_cleanup(ar);
destroy_workqueue(ar->ath6kl_wq);
if (ar->htc_target)
ath6kl_htc_cleanup(ar->htc_target);
ath6kl_cookie_cleanup(ar);
ath6kl_cleanup_amsdu_rxbufs(ar);
ath6kl_bmi_cleanup(ar);
ath6kl_debug_cleanup(ar);
kfree(ar->fw_board);
kfree(ar->fw_otp);
vfree(ar->fw);
kfree(ar->fw_patch);
kfree(ar->fw_testscript);
ath6kl_cfg80211_cleanup(ar);
}
EXPORT_SYMBOL(ath6kl_core_cleanup);
void ath6kl_core_destroy(struct ath6kl *ar)
{
ath6kl_cfg80211_destroy(ar);
}
EXPORT_SYMBOL(ath6kl_core_destroy);
MODULE_AUTHOR("Qualcomm Atheros");
MODULE_DESCRIPTION("Core module for AR600x SDIO and USB devices.");
MODULE_LICENSE("Dual BSD/GPL");