UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/clk/samsung/clk-exynos-clkout.c

246 lines
5.9 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04 16:11:33 +08:00
// SPDX-License-Identifier: GPL-2.0-only
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
/*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* Author: Tomasz Figa <t.figa@samsung.com>
*
* Clock driver for Exynos clock output
*/
clk: samsung: Properly include clk.h and clkdev.h Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Only include clk.h in files that are using it. The clkdev.h header isn't always used either, so remove it and add in slab.h where files were relying on it to include slab for them. Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-20 06:00:46 +08:00
#include <linux/slab.h>
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
#include <linux/clk.h>
#include <linux/clk-provider.h>
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
#include <linux/module.h>
clk: Remove io.h from clk-provider.h Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-19 06:20:22 +08:00
#include <linux/io.h>
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
#include <linux/of.h>
#include <linux/of_address.h>
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
#define EXYNOS_CLKOUT_NR_CLKS 1
#define EXYNOS_CLKOUT_PARENTS 32
#define EXYNOS_PMU_DEBUG_REG 0xa00
#define EXYNOS_CLKOUT_DISABLE_SHIFT 0
#define EXYNOS_CLKOUT_MUX_SHIFT 8
#define EXYNOS4_CLKOUT_MUX_MASK 0xf
#define EXYNOS5_CLKOUT_MUX_MASK 0x1f
struct exynos_clkout {
struct clk_gate gate;
struct clk_mux mux;
spinlock_t slock;
void __iomem *reg;
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
struct device_node *np;
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
u32 pmu_debug_save;
clk: samsung: exynos-clkout: Convert to the new clk_hw API Clock providers should use the new struct clk_hw based API, so convert Exynos CLKOUT clock provider to the new approach. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-04-24 14:42:22 +08:00
struct clk_hw_onecell_data data;
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
};
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
struct exynos_clkout_variant {
u32 mux_mask;
};
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
static const struct exynos_clkout_variant exynos_clkout_exynos4 = {
.mux_mask = EXYNOS4_CLKOUT_MUX_MASK,
};
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
static const struct exynos_clkout_variant exynos_clkout_exynos5 = {
.mux_mask = EXYNOS5_CLKOUT_MUX_MASK,
};
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
static const struct of_device_id exynos_clkout_ids[] = {
{
.compatible = "samsung,exynos3250-pmu",
.data = &exynos_clkout_exynos4,
}, {
.compatible = "samsung,exynos4210-pmu",
.data = &exynos_clkout_exynos4,
}, {
.compatible = "samsung,exynos4412-pmu",
.data = &exynos_clkout_exynos4,
}, {
.compatible = "samsung,exynos5250-pmu",
.data = &exynos_clkout_exynos5,
}, {
.compatible = "samsung,exynos5410-pmu",
.data = &exynos_clkout_exynos5,
}, {
.compatible = "samsung,exynos5420-pmu",
.data = &exynos_clkout_exynos5,
}, {
.compatible = "samsung,exynos5433-pmu",
.data = &exynos_clkout_exynos5,
}, { }
};
clk: samsung: allow building the clkout driver as module The Exynos clock output driver can be built as module (it does not have to be part of core init process) for better customization. Adding a KConfig entry allows also compile testing for build coverage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201110193749.261367-1-krzk@kernel.org
2020-11-11 03:37:49 +08:00
MODULE_DEVICE_TABLE(of, exynos_clkout_ids);
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
/*
* Device will be instantiated as child of PMU device without its own
* device node. Therefore match compatibles against parent.
*/
static int exynos_clkout_match_parent_dev(struct device *dev, u32 *mux_mask)
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
{
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
const struct exynos_clkout_variant *variant;
const struct of_device_id *match;
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
if (!dev->parent) {
dev_err(dev, "not instantiated from MFD\n");
return -EINVAL;
}
match = of_match_device(exynos_clkout_ids, dev->parent);
if (!match) {
dev_err(dev, "cannot match parent device\n");
return -EINVAL;
}
variant = match->data;
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
*mux_mask = variant->mux_mask;
return 0;
}
static int exynos_clkout_probe(struct platform_device *pdev)
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
{
const char *parent_names[EXYNOS_CLKOUT_PARENTS];
struct clk *parents[EXYNOS_CLKOUT_PARENTS];
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
struct exynos_clkout *clkout;
int parent_count, ret, i;
u32 mux_mask;
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
clkout = devm_kzalloc(&pdev->dev,
struct_size(clkout, data.hws, EXYNOS_CLKOUT_NR_CLKS),
GFP_KERNEL);
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
if (!clkout)
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
return -ENOMEM;
ret = exynos_clkout_match_parent_dev(&pdev->dev, &mux_mask);
if (ret)
return ret;
clkout->np = pdev->dev.of_node;
if (!clkout->np) {
/*
* pdev->dev.parent was checked by exynos_clkout_match_parent_dev()
* so it is not NULL.
*/
clkout->np = pdev->dev.parent->of_node;
}
platform_set_drvdata(pdev, clkout);
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
spin_lock_init(&clkout->slock);
parent_count = 0;
for (i = 0; i < EXYNOS_CLKOUT_PARENTS; ++i) {
char name[] = "clkoutXX";
snprintf(name, sizeof(name), "clkout%d", i);
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
parents[i] = of_clk_get_by_name(clkout->np, name);
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
if (IS_ERR(parents[i])) {
parent_names[i] = "none";
continue;
}
parent_names[i] = __clk_get_name(parents[i]);
parent_count = i + 1;
}
if (!parent_count)
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
return -EINVAL;
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
clkout->reg = of_iomap(clkout->np, 0);
if (!clkout->reg) {
ret = -ENODEV;
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
goto clks_put;
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
}
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
clkout->gate.reg = clkout->reg + EXYNOS_PMU_DEBUG_REG;
clkout->gate.bit_idx = EXYNOS_CLKOUT_DISABLE_SHIFT;
clkout->gate.flags = CLK_GATE_SET_TO_DISABLE;
clkout->gate.lock = &clkout->slock;
clkout->mux.reg = clkout->reg + EXYNOS_PMU_DEBUG_REG;
clkout->mux.mask = mux_mask;
clkout->mux.shift = EXYNOS_CLKOUT_MUX_SHIFT;
clkout->mux.lock = &clkout->slock;
clk: samsung: exynos-clkout: Convert to the new clk_hw API Clock providers should use the new struct clk_hw based API, so convert Exynos CLKOUT clock provider to the new approach. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-04-24 14:42:22 +08:00
clkout->data.hws[0] = clk_hw_register_composite(NULL, "clkout",
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
parent_names, parent_count, &clkout->mux.hw,
&clk_mux_ops, NULL, NULL, &clkout->gate.hw,
&clk_gate_ops, CLK_SET_RATE_PARENT
| CLK_SET_RATE_NO_REPARENT);
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
if (IS_ERR(clkout->data.hws[0])) {
ret = PTR_ERR(clkout->data.hws[0]);
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
goto err_unmap;
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
}
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
clk: samsung: exynos-clkout: Convert to the new clk_hw API Clock providers should use the new struct clk_hw based API, so convert Exynos CLKOUT clock provider to the new approach. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-04-24 14:42:22 +08:00
clkout->data.num = EXYNOS_CLKOUT_NR_CLKS;
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
ret = of_clk_add_hw_provider(clkout->np, of_clk_hw_onecell_get, &clkout->data);
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
if (ret)
goto err_clk_unreg;
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
return 0;
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
err_clk_unreg:
clk: samsung: exynos-clkout: Convert to the new clk_hw API Clock providers should use the new struct clk_hw based API, so convert Exynos CLKOUT clock provider to the new approach. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-04-24 14:42:22 +08:00
clk_hw_unregister(clkout->data.hws[0]);
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
err_unmap:
iounmap(clkout->reg);
clks_put:
for (i = 0; i < EXYNOS_CLKOUT_PARENTS; ++i)
if (!IS_ERR(parents[i]))
clk_put(parents[i]);
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
dev_err(&pdev->dev, "failed to register clkout clock\n");
return ret;
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
}
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
static int exynos_clkout_remove(struct platform_device *pdev)
{
struct exynos_clkout *clkout = platform_get_drvdata(pdev);
of_clk_del_provider(clkout->np);
clk_hw_unregister(clkout->data.hws[0]);
iounmap(clkout->reg);
return 0;
}
clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT The Exynos PMU node is an interrupt, clock and PMU (Power Management Unit) controller, and these functionalities are supported by different drivers that matches the same compatible strings. Since commit 989eafd0b609 ("clk: core: Avoid double initialization of clocks") the OF core flags clock controllers registered with the CLK_OF_DECLARE() macro as OF_POPULATED, so platform devices with the same compatible string will not be registered. This prevents the PMU platform device to be created, so the Exynos PMU driver is never probed. This breaks (among other things) Suspend-to-RAM. Fix this by changing CLKOUT driver initialization method to CLK_OF_DECLARE_DRIVER(), which doesn't clear the OF_POPULATED flag, so later a platform device is created and the Exynos PMU platform driver can be be probed properly. Fixes: 989eafd0b609 ("clk: core: Avoid double initialization of clocks") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-26 14:12:20 +08:00
clk: samsung: mark PM functions as __maybe_unused The use of SIMPLE_DEV_PM_OPS() means that the suspend/resume functions are now unused when CONFIG_PM is disabled: drivers/clk/samsung/clk-exynos-clkout.c:219:12: error: 'exynos_clkout_resume' defined but not used [-Werror=unused-function] 219 | static int exynos_clkout_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~ drivers/clk/samsung/clk-exynos-clkout.c:210:12: error: 'exynos_clkout_suspend' defined but not used [-Werror=unused-function] 210 | static int exynos_clkout_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~ Mark them as __maybe_unused to shut up the otherwise harmless warning. Fixes: 9484f2cb8332 ("clk: samsung: exynos-clkout: convert to module driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201204091616.4128366-1-arnd@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-12-04 17:16:11 +08:00
static int __maybe_unused exynos_clkout_suspend(struct device *dev)
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
{
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
struct exynos_clkout *clkout = dev_get_drvdata(dev);
clkout->pmu_debug_save = readl(clkout->reg + EXYNOS_PMU_DEBUG_REG);
return 0;
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
}
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
clk: samsung: mark PM functions as __maybe_unused The use of SIMPLE_DEV_PM_OPS() means that the suspend/resume functions are now unused when CONFIG_PM is disabled: drivers/clk/samsung/clk-exynos-clkout.c:219:12: error: 'exynos_clkout_resume' defined but not used [-Werror=unused-function] 219 | static int exynos_clkout_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~ drivers/clk/samsung/clk-exynos-clkout.c:210:12: error: 'exynos_clkout_suspend' defined but not used [-Werror=unused-function] 210 | static int exynos_clkout_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~ Mark them as __maybe_unused to shut up the otherwise harmless warning. Fixes: 9484f2cb8332 ("clk: samsung: exynos-clkout: convert to module driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201204091616.4128366-1-arnd@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-12-04 17:16:11 +08:00
static int __maybe_unused exynos_clkout_resume(struct device *dev)
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
{
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
struct exynos_clkout *clkout = dev_get_drvdata(dev);
writel(clkout->pmu_debug_save, clkout->reg + EXYNOS_PMU_DEBUG_REG);
return 0;
clk: samsung: Add driver to control CLKOUT line on Exynos SoCs This patch introduces a driver that handles configuration of CLKOUT pin of Exynos SoCs that can be used to output certain clocks from inside of the SoC to a dedicated output pin. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-25 00:08:26 +08:00
}
clk: samsung: exynos-clkout: convert to module driver The Exynos clkout driver depends on board input clock (typically XXTI or XUSBXTI), however on Exynos4 boards these clocks were modeled as part of SoC clocks (Exynos4 clocks driver). Obviously this is not proper, but correcting it would break DT backward compatibility. Both drivers - clkout and Exynos4 clocks - register the clock providers with CLK_OF_DECLARE/OF_DECLARE_1 so their order is fragile (in the Makefile clkout is behind Exynos4 clock). It will work only if the Exynos4 clock driver comes up before clkout. A change in DTS adding input clock reference to Exynos4 clocks input PLL, see reverted commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid"), caused probe reorder: the clkout appeared before Exynos4 clock provider. Since clkout depends on Exynos4 clocks and does not support deferred probe, this did not work and caused later failure of usb3503 USB hub probe which needs clkout: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) The Exynos clkout driver is not a critical/core clock so there is actually no problem in instantiating it later, as a regular module. This removes specific probe ordering and adds support for probe deferral. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201001165646.32279-3-krzk@kernel.org
2020-10-02 00:56:46 +08:00
static SIMPLE_DEV_PM_OPS(exynos_clkout_pm_ops, exynos_clkout_suspend,
exynos_clkout_resume);
static struct platform_driver exynos_clkout_driver = {
.driver = {
.name = "exynos-clkout",
.of_match_table = exynos_clkout_ids,
.pm = &exynos_clkout_pm_ops,
},
.probe = exynos_clkout_probe,
.remove = exynos_clkout_remove,
};
module_platform_driver(exynos_clkout_driver);
MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>");
MODULE_DESCRIPTION("Samsung Exynos clock output driver");
MODULE_LICENSE("GPL");