OpenCloudOS-Kernel/drivers/gpu/drm/hyperv/hyperv_drm_modeset.c

237 lines
6.1 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2021 Microsoft
*/
#include <linux/hyperv.h>
#include <drm/drm_damage_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_format_helper.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_gem_atomic_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_gem_shmem_helper.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_simple_kms_helper.h>
#include "hyperv_drm.h"
static int hyperv_blit_to_vram_rect(struct drm_framebuffer *fb,
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-05 01:05:41 +08:00
const struct iosys_map *map,
struct drm_rect *rect)
{
struct hyperv_drm_device *hv = to_hv(fb->dev);
void __iomem *dst = hv->vram;
void *vmap = map->vaddr; /* TODO: Use mapping abstraction properly */
int idx;
if (!drm_dev_enter(&hv->dev, &idx))
return -ENODEV;
dst += drm_fb_clip_offset(fb->pitches[0], fb->format, rect);
drm_fb_memcpy_toio(dst, fb->pitches[0], vmap, fb, rect);
drm_dev_exit(idx);
return 0;
}
dma-buf-map: Rename to iosys-map Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2022-02-05 01:05:41 +08:00
static int hyperv_blit_to_vram_fullscreen(struct drm_framebuffer *fb,
const struct iosys_map *map)
{
struct drm_rect fullscreen = {
.x1 = 0,
.x2 = fb->width,
.y1 = 0,
.y2 = fb->height,
};
return hyperv_blit_to_vram_rect(fb, map, &fullscreen);
}
static int hyperv_connector_get_modes(struct drm_connector *connector)
{
struct hyperv_drm_device *hv = to_hv(connector->dev);
int count;
count = drm_add_modes_noedid(connector,
connector->dev->mode_config.max_width,
connector->dev->mode_config.max_height);
drm_set_preferred_mode(connector, hv->preferred_width,
hv->preferred_height);
return count;
}
static const struct drm_connector_helper_funcs hyperv_connector_helper_funcs = {
.get_modes = hyperv_connector_get_modes,
};
static const struct drm_connector_funcs hyperv_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = drm_connector_cleanup,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static inline int hyperv_conn_init(struct hyperv_drm_device *hv)
{
drm_connector_helper_add(&hv->connector, &hyperv_connector_helper_funcs);
return drm_connector_init(&hv->dev, &hv->connector,
&hyperv_connector_funcs,
DRM_MODE_CONNECTOR_VIRTUAL);
}
static int hyperv_check_size(struct hyperv_drm_device *hv, int w, int h,
struct drm_framebuffer *fb)
{
u32 pitch = w * (hv->screen_depth / 8);
if (fb)
pitch = fb->pitches[0];
if (pitch * h > hv->fb_size)
return -EINVAL;
return 0;
}
static void hyperv_pipe_enable(struct drm_simple_display_pipe *pipe,
struct drm_crtc_state *crtc_state,
struct drm_plane_state *plane_state)
{
struct hyperv_drm_device *hv = to_hv(pipe->crtc.dev);
struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
hyperv_hide_hw_ptr(hv->hdev);
hyperv_update_situation(hv->hdev, 1, hv->screen_depth,
crtc_state->mode.hdisplay,
crtc_state->mode.vdisplay,
plane_state->fb->pitches[0]);
hyperv_blit_to_vram_fullscreen(plane_state->fb, &shadow_plane_state->data[0]);
}
static int hyperv_pipe_check(struct drm_simple_display_pipe *pipe,
struct drm_plane_state *plane_state,
struct drm_crtc_state *crtc_state)
{
struct hyperv_drm_device *hv = to_hv(pipe->crtc.dev);
struct drm_framebuffer *fb = plane_state->fb;
if (fb->format->format != DRM_FORMAT_XRGB8888)
return -EINVAL;
if (fb->pitches[0] * fb->height > hv->fb_size)
return -EINVAL;
return 0;
}
static void hyperv_pipe_update(struct drm_simple_display_pipe *pipe,
struct drm_plane_state *old_state)
{
struct hyperv_drm_device *hv = to_hv(pipe->crtc.dev);
struct drm_plane_state *state = pipe->plane.state;
struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(state);
struct drm_rect rect;
if (drm_atomic_helper_damage_merged(old_state, state, &rect)) {
hyperv_blit_to_vram_rect(state->fb, &shadow_plane_state->data[0], &rect);
hyperv_update_dirt(hv->hdev, &rect);
}
}
static const struct drm_simple_display_pipe_funcs hyperv_pipe_funcs = {
.enable = hyperv_pipe_enable,
.check = hyperv_pipe_check,
.update = hyperv_pipe_update,
DRM_GEM_SIMPLE_DISPLAY_PIPE_SHADOW_PLANE_FUNCS,
};
static const uint32_t hyperv_formats[] = {
DRM_FORMAT_XRGB8888,
};
static const uint64_t hyperv_modifiers[] = {
DRM_FORMAT_MOD_LINEAR,
DRM_FORMAT_MOD_INVALID
};
static inline int hyperv_pipe_init(struct hyperv_drm_device *hv)
{
int ret;
ret = drm_simple_display_pipe_init(&hv->dev,
&hv->pipe,
&hyperv_pipe_funcs,
hyperv_formats,
ARRAY_SIZE(hyperv_formats),
hyperv_modifiers,
&hv->connector);
if (ret)
return ret;
drm_plane_enable_fb_damage_clips(&hv->pipe.plane);
return 0;
}
static enum drm_mode_status
hyperv_mode_valid(struct drm_device *dev,
const struct drm_display_mode *mode)
{
struct hyperv_drm_device *hv = to_hv(dev);
if (hyperv_check_size(hv, mode->hdisplay, mode->vdisplay, NULL))
return MODE_BAD;
return MODE_OK;
}
static const struct drm_mode_config_funcs hyperv_mode_config_funcs = {
.fb_create = drm_gem_fb_create_with_dirty,
.mode_valid = hyperv_mode_valid,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
};
int hyperv_mode_config_init(struct hyperv_drm_device *hv)
{
struct drm_device *dev = &hv->dev;
int ret;
ret = drmm_mode_config_init(dev);
if (ret) {
drm_err(dev, "Failed to initialized mode setting.\n");
return ret;
}
dev->mode_config.min_width = 0;
dev->mode_config.min_height = 0;
dev->mode_config.max_width = hv->screen_width_max;
dev->mode_config.max_height = hv->screen_height_max;
dev->mode_config.preferred_depth = hv->screen_depth;
dev->mode_config.prefer_shadow = 0;
dev->mode_config.funcs = &hyperv_mode_config_funcs;
ret = hyperv_conn_init(hv);
if (ret) {
drm_err(dev, "Failed to initialized connector.\n");
return ret;
}
ret = hyperv_pipe_init(hv);
if (ret) {
drm_err(dev, "Failed to initialized pipe.\n");
return ret;
}
drm_mode_config_reset(dev);
return 0;
}