OpenCloudOS-Kernel/drivers/mfd/madera-i2c.c

152 lines
3.6 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* I2C bus interface to Cirrus Logic Madera codecs
*
* Copyright (C) 2015-2018 Cirrus Logic
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/mfd/madera/core.h>
#include "madera.h"
static int madera_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct madera *madera;
const struct regmap_config *regmap_16bit_config = NULL;
const struct regmap_config *regmap_32bit_config = NULL;
const void *of_data;
unsigned long type;
const char *name;
int ret;
of_data = of_device_get_match_data(&i2c->dev);
if (of_data)
type = (unsigned long)of_data;
else
type = id->driver_data;
switch (type) {
case CS47L15:
if (IS_ENABLED(CONFIG_MFD_CS47L15)) {
regmap_16bit_config = &cs47l15_16bit_i2c_regmap;
regmap_32bit_config = &cs47l15_32bit_i2c_regmap;
}
break;
case CS47L35:
if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
regmap_16bit_config = &cs47l35_16bit_i2c_regmap;
regmap_32bit_config = &cs47l35_32bit_i2c_regmap;
}
break;
case CS47L85:
case WM1840:
if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
regmap_16bit_config = &cs47l85_16bit_i2c_regmap;
regmap_32bit_config = &cs47l85_32bit_i2c_regmap;
}
break;
case CS47L90:
case CS47L91:
if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
regmap_16bit_config = &cs47l90_16bit_i2c_regmap;
regmap_32bit_config = &cs47l90_32bit_i2c_regmap;
}
break;
case CS42L92:
case CS47L92:
case CS47L93:
if (IS_ENABLED(CONFIG_MFD_CS47L92)) {
regmap_16bit_config = &cs47l92_16bit_i2c_regmap;
regmap_32bit_config = &cs47l92_32bit_i2c_regmap;
}
break;
default:
dev_err(&i2c->dev,
"Unknown Madera I2C device type %ld\n", type);
return -EINVAL;
}
name = madera_name_from_type(type);
if (!regmap_16bit_config) {
/* it's polite to say which codec isn't built into the kernel */
dev_err(&i2c->dev,
"Kernel does not include support for %s\n", name);
return -EINVAL;
}
madera = devm_kzalloc(&i2c->dev, sizeof(*madera), GFP_KERNEL);
if (!madera)
return -ENOMEM;
madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config);
if (IS_ERR(madera->regmap)) {
ret = PTR_ERR(madera->regmap);
dev_err(&i2c->dev,
"Failed to allocate 16-bit register map: %d\n", ret);
return ret;
}
madera->regmap_32bit = devm_regmap_init_i2c(i2c, regmap_32bit_config);
if (IS_ERR(madera->regmap_32bit)) {
ret = PTR_ERR(madera->regmap_32bit);
dev_err(&i2c->dev,
"Failed to allocate 32-bit register map: %d\n", ret);
return ret;
}
madera->type = type;
madera->type_name = name;
madera->dev = &i2c->dev;
madera->irq = i2c->irq;
return madera_dev_init(madera);
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 16:02:30 +08:00
static void madera_i2c_remove(struct i2c_client *i2c)
{
struct madera *madera = dev_get_drvdata(&i2c->dev);
madera_dev_exit(madera);
}
static const struct i2c_device_id madera_i2c_id[] = {
{ "cs47l15", CS47L15 },
{ "cs47l35", CS47L35 },
{ "cs47l85", CS47L85 },
{ "cs47l90", CS47L90 },
{ "cs47l91", CS47L91 },
{ "cs42l92", CS42L92 },
{ "cs47l92", CS47L92 },
{ "cs47l93", CS47L93 },
{ "wm1840", WM1840 },
{ }
};
MODULE_DEVICE_TABLE(i2c, madera_i2c_id);
static struct i2c_driver madera_i2c_driver = {
.driver = {
.name = "madera",
.pm = &madera_pm_ops,
.of_match_table = of_match_ptr(madera_of_match),
},
.probe = madera_i2c_probe,
.remove = madera_i2c_remove,
.id_table = madera_i2c_id,
};
module_i2c_driver(madera_i2c_driver);
MODULE_DESCRIPTION("Madera I2C bus interface");
MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");
MODULE_LICENSE("GPL v2");