UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/fs/ceph/dir.c

1392 lines
37 KiB
C
Raw Normal View History

ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include <linux/ceph/ceph_debug.h>
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
#include <linux/spinlock.h>
#include <linux/fs_struct.h>
#include <linux/namei.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
#include <linux/sched.h>
#include "super.h"
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include "mds_client.h"
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* Directory operations: readdir, lookup, create, link, unlink,
* rename, etc.
*/
/*
* Ceph MDS operations are specified in terms of a base ino and
* relative path. Thus, the client can specify an operation on a
* specific inode (e.g., a getattr due to fstat(2)), or as a path
* relative to, say, the root directory.
*
* Normally, we limit ourselves to strict inode ops (no path component)
* or dentry operations (a single path component relative to an ino). The
* exception to this is open_root_dentry(), which will open the mount
* point by name.
*/
const struct inode_operations ceph_dir_iops;
const struct file_operations ceph_dir_fops;
ceph: constify dentry_operations This makes checkpatch happy. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-04 01:25:30 +08:00
const struct dentry_operations ceph_dentry_ops;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* Initialize ceph dentry state.
*/
int ceph_init_dentry(struct dentry *dentry)
{
struct ceph_dentry_info *di;
if (dentry->d_fsdata)
return 0;
ceph: initialize fields on new dentry_infos Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-25 07:23:48 +08:00
di = kmem_cache_alloc(ceph_dentry_cachep, GFP_NOFS | __GFP_ZERO);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (!di)
return -ENOMEM; /* oh well */
spin_lock(&dentry->d_lock);
ceph: fix memory leak due to possible dentry init race Free dentry_info in error path. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-24 02:36:54 +08:00
if (dentry->d_fsdata) {
/* lost a race */
kmem_cache_free(ceph_dentry_cachep, di);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
goto out_unlock;
ceph: fix memory leak due to possible dentry init race Free dentry_info in error path. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-24 02:36:54 +08:00
}
ceph: handle racing calls to ceph_init_dentry The ->lookup() and prepopulate_readdir() callers are working with unhashed dentries, so we don't have to worry. The export.c callers, though, need to initialize something they got back from d_obtain_alias() and are potentially racing with other callers. Make sure we don't return unless the dentry is properly initialized (by us or someone else). Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:30:15 +08:00
if (dentry->d_parent == NULL || /* nfs fh_to_dentry */
ceph_snap(dentry->d_parent->d_inode) == CEPH_NOSNAP)
d_set_d_op(dentry, &ceph_dentry_ops);
else if (ceph_snap(dentry->d_parent->d_inode) == CEPH_SNAPDIR)
d_set_d_op(dentry, &ceph_snapdir_dentry_ops);
else
d_set_d_op(dentry, &ceph_snap_dentry_ops);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
di->dentry = dentry;
di->lease_session = NULL;
dentry->d_time = jiffies;
ceph: handle racing calls to ceph_init_dentry The ->lookup() and prepopulate_readdir() callers are working with unhashed dentries, so we don't have to worry. The export.c callers, though, need to initialize something they got back from d_obtain_alias() and are potentially racing with other callers. Make sure we don't return unless the dentry is properly initialized (by us or someone else). Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:30:15 +08:00
/* avoid reordering d_fsdata setup so that the check above is safe */
smp_mb();
dentry->d_fsdata = di;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph_dentry_lru_add(dentry);
out_unlock:
spin_unlock(&dentry->d_lock);
return 0;
}
ceph: protect access to d_parent d_parent is protected by d_lock: use it when looking up a dentry's parent directory inode. Also take a reference and drop it in the caller to avoid a use-after-free. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:30:29 +08:00
struct inode *ceph_get_dentry_parent_inode(struct dentry *dentry)
{
struct inode *inode = NULL;
if (!dentry)
return NULL;
spin_lock(&dentry->d_lock);
if (dentry->d_parent) {
inode = dentry->d_parent->d_inode;
ihold(inode);
}
spin_unlock(&dentry->d_lock);
return inode;
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* for readdir, we encode the directory frag and offset within that
* frag into f_pos.
*/
static unsigned fpos_frag(loff_t p)
{
return p >> 32;
}
static unsigned fpos_off(loff_t p)
{
return p & 0xffffffff;
}
/*
* When possible, we try to satisfy a readdir by peeking at the
* dcache. We make this work by carefully ordering dentries on
* d_u.d_child when we initially get results back from the MDS, and
* falling back to a "normal" sync readdir if any dentries in the dir
* are dropped.
*
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-04 00:23:36 +08:00
* D_COMPLETE tells indicates we have all dentries in the dir. It is
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
* defined IFF we hold CEPH_CAP_FILE_SHARED (which will be revoked by
* the MDS if/when the directory is modified).
*/
static int __dcache_readdir(struct file *filp,
void *dirent, filldir_t filldir)
{
struct ceph_file_info *fi = filp->private_data;
struct dentry *parent = filp->f_dentry;
struct inode *dir = parent->d_inode;
struct list_head *p;
struct dentry *dentry, *last;
struct ceph_dentry_info *di;
int err = 0;
/* claim ref on last dentry we returned */
last = fi->dentry;
fi->dentry = NULL;
dout("__dcache_readdir %p at %llu (last %p)\n", dir, filp->f_pos,
last);
fs: dcache scale subdirs Protect d_subdirs and d_child with d_lock, except in filesystems that aren't using dcache_lock for these anyway (eg. using i_mutex). Note: if we change the locking rule in future so that ->d_child protection is provided only with ->d_parent->d_lock, it may allow us to reduce some locking. But it would be an exception to an otherwise regular locking scheme, so we'd have to see some good results. Probably not worthwhile. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:34 +08:00
spin_lock(&parent->d_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/* start at beginning? */
ceph: avoid possible null deref in readdir after dir llseek last may be NULL, but we dereference it in the else branch without checking. Normally it doesn't trigger because last == NULL when fpos == 2, but it could happen on a newly opened dir if the user seeks forward. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-23 14:58:06 +08:00
if (filp->f_pos == 2 || last == NULL ||
filp->f_pos < ceph_dentry(last)->offset) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (list_empty(&parent->d_subdirs))
goto out_unlock;
p = parent->d_subdirs.prev;
dout(" initial p %p/%p\n", p->prev, p->next);
} else {
p = last->d_u.d_child.prev;
}
more:
dentry = list_entry(p, struct dentry, d_u.d_child);
di = ceph_dentry(dentry);
while (1) {
ceph: set dn offset when spliced We want to assign an offset when the dentry goes from null to linked, which is always done by splice_dentry(). Notably, we should NOT assign an offset when a dentry is first created and is still null. BUG if we try to splice a non-null dentry (we shouldn't). Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-04 13:08:02 +08:00
dout(" p %p/%p %s d_subdirs %p/%p\n", p->prev, p->next,
d_unhashed(dentry) ? "!hashed" : "hashed",
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
parent->d_subdirs.prev, parent->d_subdirs.next);
if (p == &parent->d_subdirs) {
ceph: use flag bit for at_end readdir flag This saves us a word of memory per file. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:26:18 +08:00
fi->flags |= CEPH_F_ATEND;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
goto out_unlock;
}
fs: dcache scale subdirs Protect d_subdirs and d_child with d_lock, except in filesystems that aren't using dcache_lock for these anyway (eg. using i_mutex). Note: if we change the locking rule in future so that ->d_child protection is provided only with ->d_parent->d_lock, it may allow us to reduce some locking. But it would be an exception to an otherwise regular locking scheme, so we'd have to see some good results. Probably not worthwhile. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:34 +08:00
spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (!d_unhashed(dentry) && dentry->d_inode &&
ceph: exclude snapdir from readdir results It was hidden from sync readdir, but not the cached dcache version. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-12 07:21:27 +08:00
ceph_snap(dentry->d_inode) != CEPH_SNAPDIR &&
ceph: hide /.ceph from readdir results We need to skip /.ceph in (cached) readdir results, and exclude "/.ceph" from the cached ENOENT lookup check. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-03 03:54:25 +08:00
ceph_ino(dentry->d_inode) != CEPH_INO_CEPH &&
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
filp->f_pos <= di->offset)
break;
dout(" skipping %p %.*s at %llu (%llu)%s%s\n", dentry,
dentry->d_name.len, dentry->d_name.name, di->offset,
filp->f_pos, d_unhashed(dentry) ? " unhashed" : "",
!dentry->d_inode ? " null" : "");
fs: dcache scale d_unhashed Protect d_unhashed(dentry) condition with d_lock. This means keeping DCACHE_UNHASHED bit in synch with hash manipulations. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:33 +08:00
spin_unlock(&dentry->d_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
p = p->prev;
dentry = list_entry(p, struct dentry, d_u.d_child);
di = ceph_dentry(dentry);
}
fs: dcache scale d_unhashed Protect d_unhashed(dentry) condition with d_lock. This means keeping DCACHE_UNHASHED bit in synch with hash manipulations. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:33 +08:00
dget_dlock(dentry);
fs: dcache scale dentry refcount Make d_count non-atomic and protect it with d_lock. This allows us to ensure a 0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when we start protecting many other dentry members with d_lock. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:32 +08:00
spin_unlock(&dentry->d_lock);
fs: dcache scale subdirs Protect d_subdirs and d_child with d_lock, except in filesystems that aren't using dcache_lock for these anyway (eg. using i_mutex). Note: if we change the locking rule in future so that ->d_child protection is provided only with ->d_parent->d_lock, it may allow us to reduce some locking. But it would be an exception to an otherwise regular locking scheme, so we'd have to see some good results. Probably not worthwhile. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:34 +08:00
spin_unlock(&parent->d_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout(" %llu (%llu) dentry %p %.*s %p\n", di->offset, filp->f_pos,
dentry, dentry->d_name.len, dentry->d_name.name, dentry->d_inode);
filp->f_pos = di->offset;
err = filldir(dirent, dentry->d_name.name,
dentry->d_name.len, di->offset,
ceph: add ino32 mount option The ino32 mount option forces the ceph fs to report 32 bit ino values. This is useful for 64 bit kernels with 32 bit userspace. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-01-22 08:44:03 +08:00
ceph_translate_ino(dentry->d_sb, dentry->d_inode->i_ino),
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dentry->d_inode->i_mode >> 12);
if (last) {
if (err < 0) {
/* remember our position */
fi->dentry = last;
fi->next_offset = di->offset;
} else {
dput(last);
}
}
ceph: fix dentry reference leak in dcache readdir When filldir returned an error (e.g. buffer full for a large directory), we would leak a dentry reference, causing an oops on umount. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-13 05:24:28 +08:00
last = dentry;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (err < 0)
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
goto out;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
filp->f_pos++;
fs: dcache remove dcache_lock dcache_lock no longer protects anything. remove it. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:38 +08:00
/* make sure a dentry wasn't dropped while we didn't have parent lock */
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-04 00:23:36 +08:00
if (!ceph_dir_test_complete(dir)) {
dout(" lost D_COMPLETE on %p; falling back to mds\n", dir);
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
err = -EAGAIN;
goto out;
}
fs: dcache scale subdirs Protect d_subdirs and d_child with d_lock, except in filesystems that aren't using dcache_lock for these anyway (eg. using i_mutex). Note: if we change the locking rule in future so that ->d_child protection is provided only with ->d_parent->d_lock, it may allow us to reduce some locking. But it would be an exception to an otherwise regular locking scheme, so we'd have to see some good results. Probably not worthwhile. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:34 +08:00
spin_lock(&parent->d_lock);
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
p = p->prev; /* advance to next dentry */
goto more;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
out_unlock:
fs: dcache scale subdirs Protect d_subdirs and d_child with d_lock, except in filesystems that aren't using dcache_lock for these anyway (eg. using i_mutex). Note: if we change the locking rule in future so that ->d_child protection is provided only with ->d_parent->d_lock, it may allow us to reduce some locking. But it would be an exception to an otherwise regular locking scheme, so we'd have to see some good results. Probably not worthwhile. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:34 +08:00
spin_unlock(&parent->d_lock);
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
out:
if (last)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dput(last);
return err;
}
/*
* make note of the last dentry we read, so we can
* continue at the same lexicographical point,
* regardless of what dir changes take place on the
* server.
*/
static int note_last_dentry(struct ceph_file_info *fi, const char *name,
int len)
{
kfree(fi->last_name);
fi->last_name = kmalloc(len+1, GFP_NOFS);
if (!fi->last_name)
return -ENOMEM;
memcpy(fi->last_name, name, len);
fi->last_name[len] = 0;
dout("note_last_dentry '%s'\n", fi->last_name);
return 0;
}
static int ceph_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
struct ceph_file_info *fi = filp->private_data;
struct inode *inode = filp->f_dentry->d_inode;
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
unsigned frag = fpos_frag(filp->f_pos);
int off = fpos_off(filp->f_pos);
int err;
u32 ftype;
struct ceph_mds_reply_info_parsed *rinfo;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
const int max_entries = fsc->mount_options->max_readdir;
const int max_bytes = fsc->mount_options->max_readdir_bytes;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("readdir %p filp %p frag %u off %u\n", inode, filp, frag, off);
ceph: use flag bit for at_end readdir flag This saves us a word of memory per file. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:26:18 +08:00
if (fi->flags & CEPH_F_ATEND)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return 0;
/* always start with . and .. */
if (filp->f_pos == 0) {
/* note dir version at start of readdir so we can tell
* if any dentries get dropped */
fi->dir_release_count = ci->i_release_count;
dout("readdir off 0 -> '.'\n");
if (filldir(dirent, ".", 1, ceph_make_fpos(0, 0),
ceph: add ino32 mount option The ino32 mount option forces the ceph fs to report 32 bit ino values. This is useful for 64 bit kernels with 32 bit userspace. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-01-22 08:44:03 +08:00
ceph_translate_ino(inode->i_sb, inode->i_ino),
inode->i_mode >> 12) < 0)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return 0;
filp->f_pos = 1;
off = 1;
}
if (filp->f_pos == 1) {
don't open-code parent_ino() in assorted ->readdir() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 23:19:44 +08:00
ino_t ino = parent_ino(filp->f_dentry);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("readdir off 1 -> '..'\n");
if (filldir(dirent, "..", 2, ceph_make_fpos(0, 1),
ceph: add ino32 mount option The ino32 mount option forces the ceph fs to report 32 bit ino values. This is useful for 64 bit kernels with 32 bit userspace. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-01-22 08:44:03 +08:00
ceph_translate_ino(inode->i_sb, ino),
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
inode->i_mode >> 12) < 0)
return 0;
filp->f_pos = 2;
off = 2;
}
/* can we use the dcache? */
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if ((filp->f_pos == 2 || fi->dentry) &&
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
!ceph_test_mount_opt(fsc, NOASYNCREADDIR) &&
ceph: avoid dcache readdir for snapdir We should always go to the MDS for readdir on the hidden snapdir. The set of snapshots can change at any time; the client can't trust its cache for that. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-23 04:47:21 +08:00
ceph_snap(inode) != CEPH_SNAPDIR &&
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-04 00:23:36 +08:00
ceph_dir_test_complete(inode) &&
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1)) {
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
err = __dcache_readdir(filp, dirent, filldir);
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
if (err != -EAGAIN)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return err;
ceph: do not carry i_lock for readdir from dcache We were taking dcache_lock inside of i_lock, which introduces a dependency not found elsewhere in the kernel, complicationg the vfs locking scalability work. Since we don't actually need it here anyway, remove it. We only need i_lock to test for the I_COMPLETE flag, so be careful to do so without dcache_lock held. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-19 05:04:31 +08:00
} else {
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
if (fi->dentry) {
err = note_last_dentry(fi, fi->dentry->d_name.name,
fi->dentry->d_name.len);
if (err)
return err;
dput(fi->dentry);
fi->dentry = NULL;
}
/* proceed with a normal readdir */
more:
/* do we have the correct frag content buffered? */
if (fi->frag != frag || fi->last_readdir == NULL) {
struct ceph_mds_request *req;
int op = ceph_snap(inode) == CEPH_SNAPDIR ?
CEPH_MDS_OP_LSSNAP : CEPH_MDS_OP_READDIR;
/* discard old result, if any */
ceph: fix possible double-free of mds request reference Clear pointer to mds request after dropping the reference to ensure we don't drop it again, as there is at least one error path through this function that does not reset fi->last_readdir to a new value. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-11 04:03:32 +08:00
if (fi->last_readdir) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph_mdsc_put_request(fi->last_readdir);
ceph: fix possible double-free of mds request reference Clear pointer to mds request after dropping the reference to ensure we don't drop it again, as there is at least one error path through this function that does not reset fi->last_readdir to a new value. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-11 04:03:32 +08:00
fi->last_readdir = NULL;
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/* requery frag tree, as the frag topology may have changed */
frag = ceph_choose_frag(ceph_inode(inode), frag, NULL, NULL);
dout("readdir fetching %llx.%llx frag %x offset '%s'\n",
ceph_vinop(inode), frag, fi->last_name);
req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
ceph: use ihold when we already have an inode ref We should use ihold whenever we already have a stable inode ref, even when we aren't holding i_lock. This avoids adding new and unnecessary locking dependencies. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-28 00:24:26 +08:00
req->r_inode = inode;
ihold(inode);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
req->r_dentry = dget(filp->f_dentry);
/* hints to request -> mds selection code */
req->r_direct_mode = USE_AUTH_MDS;
req->r_direct_hash = ceph_frag_value(frag);
req->r_direct_is_hash = true;
req->r_path2 = kstrdup(fi->last_name, GFP_NOFS);
req->r_readdir_offset = fi->next_offset;
req->r_args.readdir.frag = cpu_to_le32(frag);
req->r_args.readdir.max_entries = cpu_to_le32(max_entries);
ceph: specify max_bytes on readdir replies Specify max bytes in request to bound size of reply. Add associated mount option with default value of 512 KB. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 04:06:30 +08:00
req->r_args.readdir.max_bytes = cpu_to_le32(max_bytes);
ceph: reserve one more caps space when doing readdir We were missing space for the directory cap. The result was a BUG at fs/ceph/caps.c:2178. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-14 02:45:56 +08:00
req->r_num_caps = max_entries + 1;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
err = ceph_mdsc_do_request(mdsc, NULL, req);
if (err < 0) {
ceph_mdsc_put_request(req);
return err;
}
dout("readdir got and parsed readdir result=%d"
" on frag %x, end=%d, complete=%d\n", err, frag,
(int)req->r_reply_info.dir_end,
(int)req->r_reply_info.dir_complete);
if (!req->r_did_prepopulate) {
dout("readdir !did_prepopulate");
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-04 00:23:36 +08:00
fi->dir_release_count--; /* preclude D_COMPLETE */
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
/* note next offset and last dentry name */
fi->offset = fi->next_offset;
fi->last_readdir = req;
if (req->r_reply_info.dir_end) {
kfree(fi->last_name);
fi->last_name = NULL;
ceph: fix frag offset for non-leftmost frags We start at offset 2 for the leftmost frag, and 0 for subsequent frags. When we reach the end (rightmost), we go back to 2. This fixes readdir on fragmented (large) directories. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-12 08:48:59 +08:00
if (ceph_frag_is_rightmost(frag))
fi->next_offset = 2;
else
fi->next_offset = 0;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
} else {
rinfo = &req->r_reply_info;
err = note_last_dentry(fi,
rinfo->dir_dname[rinfo->dir_nr-1],
rinfo->dir_dname_len[rinfo->dir_nr-1]);
if (err)
return err;
fi->next_offset += rinfo->dir_nr;
}
}
rinfo = &fi->last_readdir->r_reply_info;
dout("readdir frag %x num %d off %d chunkoff %d\n", frag,
rinfo->dir_nr, off, fi->offset);
ceph: fix broken comparison in readdir loop Both off and fi->offset are unsigned, so the difference is always >= 0. Compare them directly instead of the sign of the difference. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-13 06:28:11 +08:00
while (off >= fi->offset && off - fi->offset < rinfo->dir_nr) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
u64 pos = ceph_make_fpos(frag, off);
struct ceph_mds_reply_inode *in =
rinfo->dir_in[off - fi->offset].in;
ceph: fix readdir EOVERFLOW on 32-bit archs One of the readdir filldir_t callers was passing the raw ceph 64-bit ino instead of the hashed 32-bit one, producing an EOVERFLOW in the filler callback. Fix this by calling the ceph_vino_to_ino() helper to do the conversion. Reported-by: Jan Smets <jan.smets@alcatel-lucent.com> Tested-by: Jan Smets <jan.smets@alcatel-lucent.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-19 01:15:07 +08:00
struct ceph_vino vino;
ino_t ino;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("readdir off %d (%d/%d) -> %lld '%.*s' %p\n",
off, off - fi->offset, rinfo->dir_nr, pos,
rinfo->dir_dname_len[off - fi->offset],
rinfo->dir_dname[off - fi->offset], in);
BUG_ON(!in);
ftype = le32_to_cpu(in->mode) >> 12;
ceph: fix readdir EOVERFLOW on 32-bit archs One of the readdir filldir_t callers was passing the raw ceph 64-bit ino instead of the hashed 32-bit one, producing an EOVERFLOW in the filler callback. Fix this by calling the ceph_vino_to_ino() helper to do the conversion. Reported-by: Jan Smets <jan.smets@alcatel-lucent.com> Tested-by: Jan Smets <jan.smets@alcatel-lucent.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-19 01:15:07 +08:00
vino.ino = le64_to_cpu(in->ino);
vino.snap = le64_to_cpu(in->snapid);
ino = ceph_vino_to_ino(vino);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (filldir(dirent,
rinfo->dir_dname[off - fi->offset],
rinfo->dir_dname_len[off - fi->offset],
ceph: add ino32 mount option The ino32 mount option forces the ceph fs to report 32 bit ino values. This is useful for 64 bit kernels with 32 bit userspace. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-01-22 08:44:03 +08:00
pos,
ceph_translate_ino(inode->i_sb, ino), ftype) < 0) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("filldir stopping us...\n");
return 0;
}
off++;
filp->f_pos = pos + 1;
}
if (fi->last_name) {
ceph_mdsc_put_request(fi->last_readdir);
fi->last_readdir = NULL;
goto more;
}
/* more frags? */
if (!ceph_frag_is_rightmost(frag)) {
frag = ceph_frag_next(frag);
off = 0;
filp->f_pos = ceph_make_fpos(frag, off);
dout("readdir next frag is %x\n", frag);
goto more;
}
ceph: use flag bit for at_end readdir flag This saves us a word of memory per file. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:26:18 +08:00
fi->flags |= CEPH_F_ATEND;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* if dir_release_count still matches the dir, no dentries
* were released during the whole readdir, and we should have
* the complete dir contents in our cache.
*/
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (ci->i_release_count == fi->dir_release_count) {
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-04 00:23:36 +08:00
ceph_dir_set_complete(inode);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ci->i_max_offset = filp->f_pos;
}
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("readdir %p filp %p done.\n", inode, filp);
return 0;
}
static void reset_readdir(struct ceph_file_info *fi)
{
if (fi->last_readdir) {
ceph_mdsc_put_request(fi->last_readdir);
fi->last_readdir = NULL;
}
kfree(fi->last_name);
ceph: fix dangling pointer Clear fi->last_name when it's freed. The only caller is rewinddir() (or equivalent lseek). Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-12 07:24:06 +08:00
fi->last_name = NULL;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
fi->next_offset = 2; /* compensate for . and .. */
if (fi->dentry) {
dput(fi->dentry);
fi->dentry = NULL;
}
ceph: use flag bit for at_end readdir flag This saves us a word of memory per file. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:26:18 +08:00
fi->flags &= ~CEPH_F_ATEND;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
static loff_t ceph_dir_llseek(struct file *file, loff_t offset, int origin)
{
struct ceph_file_info *fi = file->private_data;
struct inode *inode = file->f_mapping->host;
loff_t old_offset = offset;
loff_t retval;
mutex_lock(&inode->i_mutex);
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19 01:21:38 +08:00
retval = -EINVAL;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
switch (origin) {
case SEEK_END:
offset += inode->i_size + 2; /* FIXME */
break;
case SEEK_CUR:
offset += file->f_pos;
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19 01:21:38 +08:00
case SEEK_SET:
break;
default:
goto out;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19 01:21:38 +08:00
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (offset >= 0 && offset <= inode->i_sb->s_maxbytes) {
if (offset != file->f_pos) {
file->f_pos = offset;
file->f_version = 0;
ceph: use flag bit for at_end readdir flag This saves us a word of memory per file. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:26:18 +08:00
fi->flags &= ~CEPH_F_ATEND;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
retval = offset;
/*
* discard buffered readdir content on seekdir(0), or
* seek to new frag, or seek prior to current chunk.
*/
if (offset == 0 ||
fpos_frag(offset) != fpos_frag(old_offset) ||
fpos_off(offset) < fi->offset) {
dout("dir_llseek dropping %p content\n", file);
reset_readdir(fi);
}
/* bump dir_release_count if we did a forward seek */
if (offset > old_offset)
fi->dir_release_count--;
}
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19 01:21:38 +08:00
out:
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
mutex_unlock(&inode->i_mutex);
return retval;
}
/*
ceph: fix ceph_lookup_open intent usage We weren't properly calling lookup_instantiate_filp when setting up the lookup intent, which could lead to file leakage on errors. So: - use separate helper for the hidden snapdir translation, immediately following the mds request - use ceph_finish_lookup for the final dentry/return value dance in the exit path - lookup_instantiate_filp on success Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:28:11 +08:00
* Handle lookups for the hidden .snap directory.
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
*/
ceph: fix ceph_lookup_open intent usage We weren't properly calling lookup_instantiate_filp when setting up the lookup intent, which could lead to file leakage on errors. So: - use separate helper for the hidden snapdir translation, immediately following the mds request - use ceph_finish_lookup for the final dentry/return value dance in the exit path - lookup_instantiate_filp on success Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:28:11 +08:00
int ceph_handle_snapdir(struct ceph_mds_request *req,
struct dentry *dentry, int err)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dentry->d_sb);
ceph: document unlocked d_parent accesses For the most part we don't care about racing with rename when directing MDS requests; either the old or new parent is fine. Document that, and do some minor cleanup. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:31:26 +08:00
struct inode *parent = dentry->d_parent->d_inode; /* we hold i_mutex */
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/* .snap dir? */
if (err == -ENOENT &&
ceph: no .snap inside of snapped namespace Otherwise you can do things like # mkdir .snap/foo # cd .snap/foo/.snap # ls <badness> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04 05:44:35 +08:00
ceph_snap(parent) == CEPH_NOSNAP &&
ceph: allocate and parse mount args before client instance This simplifies much of the error handling during mount. It also means that we have the mount args before client creation, and we can initialize based on those options. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-28 02:50:50 +08:00
strcmp(dentry->d_name.name,
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsc->mount_options->snapdir_name) == 0) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct inode *inode = ceph_get_snapdir(parent);
dout("ENOENT on snapdir %p '%.*s', linking to snapdir %p\n",
dentry, dentry->d_name.len, dentry->d_name.name, inode);
ceph: fix dentry rehashing on virtual .snap dir If a lookup fails on the magic .snap directory, we bind it to a magic snap directory inode in ceph_lookup_finish(). That code assumes the dentry is unhashed, but a recent server-side change started returning NULL leases on lookup failure, causing the .snap dentry to be hashed and NULL by ceph_fill_trace(). This causes dentry hash chain corruption, or a dies when d_rehash() includes BUG_ON(!d_unhashed(entry)); So, avoid processing the NULL dentry lease if it the dentry matches the snapdir name in ceph_fill_trace(). That allows the lookup completion to properly bind it to the snapdir inode. BUG there if dentry is hashed to be sure. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-31 04:54:41 +08:00
BUG_ON(!d_unhashed(dentry));
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
d_add(dentry, inode);
err = 0;
}
ceph: fix ceph_lookup_open intent usage We weren't properly calling lookup_instantiate_filp when setting up the lookup intent, which could lead to file leakage on errors. So: - use separate helper for the hidden snapdir translation, immediately following the mds request - use ceph_finish_lookup for the final dentry/return value dance in the exit path - lookup_instantiate_filp on success Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:28:11 +08:00
return err;
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: fix ceph_lookup_open intent usage We weren't properly calling lookup_instantiate_filp when setting up the lookup intent, which could lead to file leakage on errors. So: - use separate helper for the hidden snapdir translation, immediately following the mds request - use ceph_finish_lookup for the final dentry/return value dance in the exit path - lookup_instantiate_filp on success Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:28:11 +08:00
/*
* Figure out final result of a lookup/open request.
*
* Mainly, make sure we return the final req->r_dentry (if it already
* existed) in place of the original VFS-provided dentry when they
* differ.
*
* Gracefully handle the case where the MDS replies with -ENOENT and
* no trace (which it may do, at its discretion, e.g., if it doesn't
* care to issue a lease on the negative dentry).
*/
struct dentry *ceph_finish_lookup(struct ceph_mds_request *req,
struct dentry *dentry, int err)
{
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (err == -ENOENT) {
/* no trace? */
err = 0;
if (!req->r_reply_info.head->is_dentry) {
dout("ENOENT and no trace, dentry %p inode %p\n",
dentry, dentry->d_inode);
if (dentry->d_inode) {
d_drop(dentry);
err = -ENOENT;
} else {
d_add(dentry, NULL);
}
}
}
if (err)
dentry = ERR_PTR(err);
else if (dentry != req->r_dentry)
dentry = dget(req->r_dentry); /* we got spliced */
else
dentry = NULL;
return dentry;
}
ceph: hide /.ceph from readdir results We need to skip /.ceph in (cached) readdir results, and exclude "/.ceph" from the cached ENOENT lookup check. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-03 03:54:25 +08:00
static int is_root_ceph_dentry(struct inode *inode, struct dentry *dentry)
{
return ceph_ino(inode) == CEPH_INO_ROOT &&
strncmp(dentry->d_name.name, ".ceph", 5) == 0;
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* Look up a single dir entry. If there is a lookup intent, inform
* the MDS so that it gets our 'caps wanted' value in a single op.
*/
static struct dentry *ceph_lookup(struct inode *dir, struct dentry *dentry,
struct nameidata *nd)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int op;
int err;
dout("lookup %p dentry %p '%.*s'\n",
dir, dentry, dentry->d_name.len, dentry->d_name.name);
if (dentry->d_name.len > NAME_MAX)
return ERR_PTR(-ENAMETOOLONG);
err = ceph_init_dentry(dentry);
if (err < 0)
return ERR_PTR(err);
/* can we conclude ENOENT locally? */
if (dentry->d_inode == NULL) {
struct ceph_inode_info *ci = ceph_inode(dir);
struct ceph_dentry_info *di = ceph_dentry(dentry);
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout(" dir %p flags are %d\n", dir, ci->i_ceph_flags);
if (strncmp(dentry->d_name.name,
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsc->mount_options->snapdir_name,
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dentry->d_name.len) &&
ceph: hide /.ceph from readdir results We need to skip /.ceph in (cached) readdir results, and exclude "/.ceph" from the cached ENOENT lookup check. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-03 03:54:25 +08:00
!is_root_ceph_dentry(dir, dentry) &&
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-04 00:23:36 +08:00
ceph_dir_test_complete(dir) &&
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
(__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1))) {
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout(" dir %p complete, -ENOENT\n", dir);
d_add(dentry, NULL);
di->lease_shared_gen = ci->i_shared_gen;
return NULL;
}
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
op = ceph_snap(dir) == CEPH_SNAPDIR ?
CEPH_MDS_OP_LOOKUPSNAP : CEPH_MDS_OP_LOOKUP;
req = ceph_mdsc_create_request(mdsc, op, USE_ANY_MDS);
if (IS_ERR(req))
fs/ceph: Use ERR_CAST Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. In the case of fs/ceph/inode.c, ERR_CAST is not needed, because the type of the returned value is the same as the type of the enclosing function. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-22 18:01:14 +08:00
return ERR_CAST(req);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
/* we only need inode linkage */
req->r_args.getattr.mask = cpu_to_le32(CEPH_STAT_CAP_INODE);
req->r_locked_dir = dir;
err = ceph_mdsc_do_request(mdsc, NULL, req);
ceph: fix ceph_lookup_open intent usage We weren't properly calling lookup_instantiate_filp when setting up the lookup intent, which could lead to file leakage on errors. So: - use separate helper for the hidden snapdir translation, immediately following the mds request - use ceph_finish_lookup for the final dentry/return value dance in the exit path - lookup_instantiate_filp on success Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:28:11 +08:00
err = ceph_handle_snapdir(req, dentry, err);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dentry = ceph_finish_lookup(req, dentry, err);
ceph_mdsc_put_request(req); /* will dput(dentry) */
dout("lookup result=%p\n", dentry);
return dentry;
}
make ->atomic_open() return int Change of calling conventions: old new NULL 1 file 0 ERR_PTR(-ve) -ve Caller *knows* that struct file *; no need to return it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:39:14 +08:00
int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
kill struct opendata Just pass struct file *. Methods are happier that way... There's no need to return struct file * from finish_open() now, so let it return int. Next: saner prototypes for parts in namei.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:40:19 +08:00
struct file *file, unsigned flags, umode_t mode,
make ->atomic_open() return int Change of calling conventions: old new NULL 1 file 0 ERR_PTR(-ve) -ve Caller *knows* that struct file *; no need to return it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:39:14 +08:00
int *opened)
ceph: implement i_op->atomic_open() Add an ->atomic_open implementation which replaces the atomic lookup+open+create operation implemented via ->lookup and ->create operations. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-05 21:10:25 +08:00
{
int err;
struct dentry *res = NULL;
if (!(flags & O_CREAT)) {
if (dentry->d_name.len > NAME_MAX)
make ->atomic_open() return int Change of calling conventions: old new NULL 1 file 0 ERR_PTR(-ve) -ve Caller *knows* that struct file *; no need to return it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:39:14 +08:00
return -ENAMETOOLONG;
ceph: implement i_op->atomic_open() Add an ->atomic_open implementation which replaces the atomic lookup+open+create operation implemented via ->lookup and ->create operations. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-05 21:10:25 +08:00
err = ceph_init_dentry(dentry);
if (err < 0)
make ->atomic_open() return int Change of calling conventions: old new NULL 1 file 0 ERR_PTR(-ve) -ve Caller *knows* that struct file *; no need to return it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:39:14 +08:00
return err;
ceph: implement i_op->atomic_open() Add an ->atomic_open implementation which replaces the atomic lookup+open+create operation implemented via ->lookup and ->create operations. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-05 21:10:25 +08:00
kill struct opendata Just pass struct file *. Methods are happier that way... There's no need to return struct file * from finish_open() now, so let it return int. Next: saner prototypes for parts in namei.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:40:19 +08:00
return ceph_lookup_open(dir, dentry, file, flags, mode, opened);
ceph: implement i_op->atomic_open() Add an ->atomic_open implementation which replaces the atomic lookup+open+create operation implemented via ->lookup and ->create operations. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-05 21:10:25 +08:00
}
if (d_unhashed(dentry)) {
res = ceph_lookup(dir, dentry, NULL);
if (IS_ERR(res))
make ->atomic_open() return int Change of calling conventions: old new NULL 1 file 0 ERR_PTR(-ve) -ve Caller *knows* that struct file *; no need to return it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:39:14 +08:00
return PTR_ERR(res);
ceph: implement i_op->atomic_open() Add an ->atomic_open implementation which replaces the atomic lookup+open+create operation implemented via ->lookup and ->create operations. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-05 21:10:25 +08:00
if (res)
dentry = res;
}
/* We don't deal with positive dentries here */
make finish_no_open() return int namely, 1 ;-) That's what we want to return from ->atomic_open() instances after finish_no_open(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-10 18:48:09 +08:00
if (dentry->d_inode)
return finish_no_open(file, res);
ceph: implement i_op->atomic_open() Add an ->atomic_open implementation which replaces the atomic lookup+open+create operation implemented via ->lookup and ->create operations. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-05 21:10:25 +08:00
->atomic_open() prototype change - pass int * instead of bool * ... and let finish_open() report having opened the file via that sucker. Next step: don't modify od->filp at all. [AV: FILE_CREATE was already used by cifs; Miklos' fix folded] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-10 17:01:45 +08:00
*opened |= FILE_CREATED;
kill struct opendata Just pass struct file *. Methods are happier that way... There's no need to return struct file * from finish_open() now, so let it return int. Next: saner prototypes for parts in namei.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:40:19 +08:00
err = ceph_lookup_open(dir, dentry, file, flags, mode, opened);
ceph: implement i_op->atomic_open() Add an ->atomic_open implementation which replaces the atomic lookup+open+create operation implemented via ->lookup and ->create operations. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-05 21:10:25 +08:00
dput(res);
make ->atomic_open() return int Change of calling conventions: old new NULL 1 file 0 ERR_PTR(-ve) -ve Caller *knows* that struct file *; no need to return it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:39:14 +08:00
return err;
ceph: implement i_op->atomic_open() Add an ->atomic_open implementation which replaces the atomic lookup+open+create operation implemented via ->lookup and ->create operations. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-05 21:10:25 +08:00
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* If we do a create but get no trace back from the MDS, follow up with
* a lookup (the VFS expects us to link up the provided dentry).
*/
int ceph_handle_notrace_create(struct inode *dir, struct dentry *dentry)
{
struct dentry *result = ceph_lookup(dir, dentry, NULL);
if (result && !IS_ERR(result)) {
/*
* We created the item, then did a lookup, and found
* it was already linked to another inode we already
* had in our cache (and thus got spliced). Link our
* dentry to that inode, but don't hash it, just in
* case the VFS wants to dereference it.
*/
BUG_ON(!result->d_inode);
d_instantiate(dentry, result->d_inode);
return 0;
}
return PTR_ERR(result);
}
static int ceph_mknod(struct inode *dir, struct dentry *dentry,
switch ->mknod() to umode_t Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26 13:52:52 +08:00
umode_t mode, dev_t rdev)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int err;
if (ceph_snap(dir) != CEPH_NOSNAP)
return -EROFS;
switch ->mknod() to umode_t Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26 13:52:52 +08:00
dout("mknod in dir %p dentry %p mode 0%ho rdev %d\n",
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dir, dentry, mode, rdev);
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_MKNOD, USE_AUTH_MDS);
if (IS_ERR(req)) {
d_drop(dentry);
return PTR_ERR(req);
}
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
req->r_locked_dir = dir;
req->r_args.mknod.mode = cpu_to_le32(mode);
req->r_args.mknod.rdev = cpu_to_le32(rdev);
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
err = ceph_mdsc_do_request(mdsc, dir, req);
if (!err && !req->r_reply_info.head->is_dentry)
err = ceph_handle_notrace_create(dir, dentry);
ceph_mdsc_put_request(req);
if (err)
d_drop(dentry);
return err;
}
switch ->create() to umode_t vfs_create() ignores everything outside of 16bit subset of its mode argument; switching it to umode_t is obviously equivalent and it's the only caller of the method Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26 13:42:34 +08:00
static int ceph_create(struct inode *dir, struct dentry *dentry, umode_t mode,
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct nameidata *nd)
{
ceph: implement i_op->atomic_open() Add an ->atomic_open implementation which replaces the atomic lookup+open+create operation implemented via ->lookup and ->create operations. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-05 21:10:25 +08:00
return ceph_mknod(dir, dentry, mode, 0);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
static int ceph_symlink(struct inode *dir, struct dentry *dentry,
const char *dest)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int err;
if (ceph_snap(dir) != CEPH_NOSNAP)
return -EROFS;
dout("symlink in dir %p dentry %p to '%s'\n", dir, dentry, dest);
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_SYMLINK, USE_AUTH_MDS);
if (IS_ERR(req)) {
d_drop(dentry);
return PTR_ERR(req);
}
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
req->r_path2 = kstrdup(dest, GFP_NOFS);
req->r_locked_dir = dir;
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
err = ceph_mdsc_do_request(mdsc, dir, req);
if (!err && !req->r_reply_info.head->is_dentry)
err = ceph_handle_notrace_create(dir, dentry);
ceph_mdsc_put_request(req);
if (err)
d_drop(dentry);
return err;
}
switch vfs_mkdir() and ->mkdir() to umode_t vfs_mkdir() gets int, but immediately drops everything that might not fit into umode_t and that's the only caller of ->mkdir()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26 13:41:39 +08:00
static int ceph_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int err = -EROFS;
int op;
if (ceph_snap(dir) == CEPH_SNAPDIR) {
/* mkdir .snap/foo is a MKSNAP */
op = CEPH_MDS_OP_MKSNAP;
dout("mksnap dir %p snap '%.*s' dn %p\n", dir,
dentry->d_name.len, dentry->d_name.name, dentry);
} else if (ceph_snap(dir) == CEPH_NOSNAP) {
switch vfs_mkdir() and ->mkdir() to umode_t vfs_mkdir() gets int, but immediately drops everything that might not fit into umode_t and that's the only caller of ->mkdir()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26 13:41:39 +08:00
dout("mkdir dir %p dn %p mode 0%ho\n", dir, dentry, mode);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
op = CEPH_MDS_OP_MKDIR;
} else {
goto out;
}
req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto out;
}
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
req->r_locked_dir = dir;
req->r_args.mkdir.mode = cpu_to_le32(mode);
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
err = ceph_mdsc_do_request(mdsc, dir, req);
if (!err && !req->r_reply_info.head->is_dentry)
err = ceph_handle_notrace_create(dir, dentry);
ceph_mdsc_put_request(req);
out:
if (err < 0)
d_drop(dentry);
return err;
}
static int ceph_link(struct dentry *old_dentry, struct inode *dir,
struct dentry *dentry)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int err;
if (ceph_snap(dir) != CEPH_NOSNAP)
return -EROFS;
dout("link in dir %p old_dentry %p dentry %p\n", dir,
old_dentry, dentry);
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_LINK, USE_AUTH_MDS);
if (IS_ERR(req)) {
d_drop(dentry);
return PTR_ERR(req);
}
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
req->r_old_dentry = dget(old_dentry); /* or inode? hrm. */
ceph: explicitly reference rename old_dentry parent dir in request We carry a pin on the parent directory for the rename source and dest dentries. For the source it's r_locked_dir; we need to explicitly reference the old_dentry parent as well, since the dentry's d_parent may change between when the request was created and pinned and when it is freed. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:31:14 +08:00
req->r_old_dentry_dir = ceph_get_dentry_parent_inode(old_dentry);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
req->r_locked_dir = dir;
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
err = ceph_mdsc_do_request(mdsc, dir, req);
ceph: use ihold when we already have an inode ref We should use ihold whenever we already have a stable inode ref, even when we aren't holding i_lock. This avoids adding new and unnecessary locking dependencies. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-28 00:24:26 +08:00
if (err) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
d_drop(dentry);
ceph: use ihold when we already have an inode ref We should use ihold whenever we already have a stable inode ref, even when we aren't holding i_lock. This avoids adding new and unnecessary locking dependencies. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-28 00:24:26 +08:00
} else if (!req->r_reply_info.head->is_dentry) {
ihold(old_dentry->d_inode);
d_instantiate(dentry, old_dentry->d_inode);
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph_mdsc_put_request(req);
return err;
}
/*
* For a soon-to-be unlinked file, drop the AUTH_RDCACHE caps. If it
* looks like the link count will hit 0, drop any other caps (other
* than PIN) we don't specifically want (due to the file still being
* open).
*/
static int drop_caps_for_unlink(struct inode *inode)
{
struct ceph_inode_info *ci = ceph_inode(inode);
int drop = CEPH_CAP_LINK_SHARED | CEPH_CAP_LINK_EXCL;
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (inode->i_nlink == 1) {
drop |= ~(__ceph_caps_wanted(ci) | CEPH_CAP_PIN);
ci->i_ceph_flags |= CEPH_I_NODELAY;
}
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return drop;
}
/*
* rmdir and unlink are differ only by the metadata op code
*/
static int ceph_unlink(struct inode *dir, struct dentry *dentry)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct inode *inode = dentry->d_inode;
struct ceph_mds_request *req;
int err = -EROFS;
int op;
if (ceph_snap(dir) == CEPH_SNAPDIR) {
/* rmdir .snap/foo is RMSNAP */
dout("rmsnap dir %p '%.*s' dn %p\n", dir, dentry->d_name.len,
dentry->d_name.name, dentry);
op = CEPH_MDS_OP_RMSNAP;
} else if (ceph_snap(dir) == CEPH_NOSNAP) {
dout("unlink/rmdir dir %p dn %p inode %p\n",
dir, dentry, inode);
get rid of open-coded S_ISREG(), etc. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26 08:49:29 +08:00
op = S_ISDIR(dentry->d_inode->i_mode) ?
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
CEPH_MDS_OP_RMDIR : CEPH_MDS_OP_UNLINK;
} else
goto out;
req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto out;
}
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
req->r_locked_dir = dir;
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
req->r_inode_drop = drop_caps_for_unlink(inode);
err = ceph_mdsc_do_request(mdsc, dir, req);
if (!err && !req->r_reply_info.head->is_dentry)
d_delete(dentry);
ceph_mdsc_put_request(req);
out:
return err;
}
static int ceph_rename(struct inode *old_dir, struct dentry *old_dentry,
struct inode *new_dir, struct dentry *new_dentry)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(old_dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int err;
if (ceph_snap(old_dir) != ceph_snap(new_dir))
return -EXDEV;
if (ceph_snap(old_dir) != CEPH_NOSNAP ||
ceph_snap(new_dir) != CEPH_NOSNAP)
return -EROFS;
dout("rename dir %p dentry %p to dir %p dentry %p\n",
old_dir, old_dentry, new_dir, new_dentry);
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_RENAME, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
req->r_dentry = dget(new_dentry);
req->r_num_caps = 2;
req->r_old_dentry = dget(old_dentry);
ceph: explicitly reference rename old_dentry parent dir in request We carry a pin on the parent directory for the rename source and dest dentries. For the source it's r_locked_dir; we need to explicitly reference the old_dentry parent as well, since the dentry's d_parent may change between when the request was created and pinned and when it is freed. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:31:14 +08:00
req->r_old_dentry_dir = ceph_get_dentry_parent_inode(old_dentry);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
req->r_locked_dir = new_dir;
req->r_old_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_old_dentry_unless = CEPH_CAP_FILE_EXCL;
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
/* release LINK_RDCACHE on source inode (mds will lock it) */
req->r_old_inode_drop = CEPH_CAP_LINK_SHARED;
if (new_dentry->d_inode)
req->r_inode_drop = drop_caps_for_unlink(new_dentry->d_inode);
err = ceph_mdsc_do_request(mdsc, old_dir, req);
if (!err && !req->r_reply_info.head->is_dentry) {
/*
* Normally d_move() is done by fill_trace (called by
* do_request, above). If there is no trace, we need
* to do it here.
*/
ceph: clear dir complete, invalidate dentry on replayed rename If a rename operation is resent to the MDS following an MDS restart, the client does not get a full reply (containing the resulting metadata) back. In that case, a ceph_rename() needs to compensate by doing anything useful that fill_inode() would have, like d_move(). It also needs to invalidate the dentry (to workaround the vfs_rename_dir() bug) and clear the dir complete flag, just like fill_trace(). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-29 07:12:06 +08:00
/* d_move screws up d_subdirs order */
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-04 00:23:36 +08:00
ceph_dir_clear_complete(new_dir);
ceph: clear dir complete, invalidate dentry on replayed rename If a rename operation is resent to the MDS following an MDS restart, the client does not get a full reply (containing the resulting metadata) back. In that case, a ceph_rename() needs to compensate by doing anything useful that fill_inode() would have, like d_move(). It also needs to invalidate the dentry (to workaround the vfs_rename_dir() bug) and clear the dir complete flag, just like fill_trace(). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-29 07:12:06 +08:00
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
d_move(old_dentry, new_dentry);
ceph: clear dir complete, invalidate dentry on replayed rename If a rename operation is resent to the MDS following an MDS restart, the client does not get a full reply (containing the resulting metadata) back. In that case, a ceph_rename() needs to compensate by doing anything useful that fill_inode() would have, like d_move(). It also needs to invalidate the dentry (to workaround the vfs_rename_dir() bug) and clear the dir complete flag, just like fill_trace(). Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-29 07:12:06 +08:00
/* ensure target dentry is invalidated, despite
rehashing bug in vfs_rename_dir */
ceph: invalidate affected dentry leases on aborted requests If we abort a request, we return to caller, but the request may still complete. And if we hold the dir FILE_EXCL bit, we may not release a lease when sending a request. A simple un-tar, control-c, un-tar again will reproduce the bug (manifested as a 'Cannot open: File exists'). Ensure we invalidate affected dentry leases (as well dir I_COMPLETE) so we don't have valid (but incorrect) leases. Do the same, consistently, at other sites where I_COMPLETE is similarly cleared. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 00:35:38 +08:00
ceph_invalidate_dentry_lease(new_dentry);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
ceph_mdsc_put_request(req);
return err;
}
ceph: invalidate affected dentry leases on aborted requests If we abort a request, we return to caller, but the request may still complete. And if we hold the dir FILE_EXCL bit, we may not release a lease when sending a request. A simple un-tar, control-c, un-tar again will reproduce the bug (manifested as a 'Cannot open: File exists'). Ensure we invalidate affected dentry leases (as well dir I_COMPLETE) so we don't have valid (but incorrect) leases. Do the same, consistently, at other sites where I_COMPLETE is similarly cleared. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 00:35:38 +08:00
/*
* Ensure a dentry lease will no longer revalidate.
*/
void ceph_invalidate_dentry_lease(struct dentry *dentry)
{
spin_lock(&dentry->d_lock);
dentry->d_time = jiffies;
ceph_dentry(dentry)->lease_shared_gen = 0;
spin_unlock(&dentry->d_lock);
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* Check if dentry lease is valid. If not, delete the lease. Try to
* renew if the least is more than half up.
*/
static int dentry_lease_is_valid(struct dentry *dentry)
{
struct ceph_dentry_info *di;
struct ceph_mds_session *s;
int valid = 0;
u32 gen;
unsigned long ttl;
struct ceph_mds_session *session = NULL;
struct inode *dir = NULL;
u32 seq = 0;
spin_lock(&dentry->d_lock);
di = ceph_dentry(dentry);
ceph: remove unnecessary d_fsdata conditional checks We now set d_fsdata unconditionally on all dentries prior to setting up the d_ops, so all of these checks are unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-12 01:48:53 +08:00
if (di->lease_session) {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
s = di->lease_session;
ceph: create a new session lock to avoid lock inversion Lockdep was reporting a possible circular lock dependency in dentry_lease_is_valid(). That function needs to sample the session's s_cap_gen and and s_cap_ttl fields coherently, but needs to do so while holding a dentry lock. The s_cap_lock field was being used to protect the two fields, but that can't be taken while holding a lock on a dentry within the session. In most cases, the s_cap_gen and s_cap_ttl fields only get operated on separately. But in three cases they need to be updated together. Implement a new lock to protect the spots updating both fields atomically is required. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 09:48:10 +08:00
spin_lock(&s->s_gen_ttl_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
gen = s->s_cap_gen;
ttl = s->s_cap_ttl;
ceph: create a new session lock to avoid lock inversion Lockdep was reporting a possible circular lock dependency in dentry_lease_is_valid(). That function needs to sample the session's s_cap_gen and and s_cap_ttl fields coherently, but needs to do so while holding a dentry lock. The s_cap_lock field was being used to protect the two fields, but that can't be taken while holding a lock on a dentry within the session. In most cases, the s_cap_gen and s_cap_ttl fields only get operated on separately. But in three cases they need to be updated together. Implement a new lock to protect the spots updating both fields atomically is required. Signed-off-by: Alex Elder <elder@dreamhost.com> Reviewed-by: Sage Weil <sage@newdream.net>
2012-01-13 09:48:10 +08:00
spin_unlock(&s->s_gen_ttl_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (di->lease_gen == gen &&
time_before(jiffies, dentry->d_time) &&
time_before(jiffies, ttl)) {
valid = 1;
if (di->lease_renew_after &&
time_after(jiffies, di->lease_renew_after)) {
/* we should renew */
dir = dentry->d_parent->d_inode;
session = ceph_get_mds_session(s);
seq = di->lease_seq;
di->lease_renew_after = 0;
di->lease_renew_from = jiffies;
}
}
}
spin_unlock(&dentry->d_lock);
if (session) {
ceph_mdsc_lease_send_msg(session, dir, dentry,
CEPH_MDS_LEASE_RENEW, seq);
ceph_put_mds_session(session);
}
dout("dentry_lease_is_valid - dentry %p = %d\n", dentry, valid);
return valid;
}
/*
* Check if directory-wide content lease/cap is valid.
*/
static int dir_lease_is_valid(struct inode *dir, struct dentry *dentry)
{
struct ceph_inode_info *ci = ceph_inode(dir);
struct ceph_dentry_info *di = ceph_dentry(dentry);
int valid = 0;
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (ci->i_shared_gen == di->lease_shared_gen)
valid = __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1);
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("dir_lease_is_valid dir %p v%u dentry %p v%u = %d\n",
dir, (unsigned)ci->i_shared_gen, dentry,
(unsigned)di->lease_shared_gen, valid);
return valid;
}
/*
* Check if cached dentry can be trusted.
*/
stop passing nameidata * to ->d_revalidate() Just the lookup flags. Die, bastard, die... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-11 04:03:43 +08:00
static int ceph_d_revalidate(struct dentry *dentry, unsigned int flags)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
ceph: protect d_parent access in ceph_d_revalidate Protect d_parent with d_lock. Carry a reference. Simplify the flow so that there is a single exit point and cleanup. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:30:43 +08:00
int valid = 0;
fs: rcu-walk aware d_revalidate method Require filesystems be aware of .d_revalidate being called in rcu-walk mode (nd->flags & LOOKUP_RCU). For now do a simple push down, returning -ECHILD from all implementations. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:57 +08:00
struct inode *dir;
stop passing nameidata * to ->d_revalidate() Just the lookup flags. Die, bastard, die... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-11 04:03:43 +08:00
if (flags & LOOKUP_RCU)
fs: rcu-walk aware d_revalidate method Require filesystems be aware of .d_revalidate being called in rcu-walk mode (nd->flags & LOOKUP_RCU). For now do a simple push down, returning -ECHILD from all implementations. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 14:49:57 +08:00
return -ECHILD;
ceph: set dn offset when spliced We want to assign an offset when the dentry goes from null to linked, which is always done by splice_dentry(). Notably, we should NOT assign an offset when a dentry is first created and is still null. BUG if we try to splice a non-null dentry (we shouldn't). Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-04 13:08:02 +08:00
dout("d_revalidate %p '%.*s' inode %p offset %lld\n", dentry,
dentry->d_name.len, dentry->d_name.name, dentry->d_inode,
ceph_dentry(dentry)->offset);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: protect d_parent access in ceph_d_revalidate Protect d_parent with d_lock. Carry a reference. Simplify the flow so that there is a single exit point and cleanup. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:30:43 +08:00
dir = ceph_get_dentry_parent_inode(dentry);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/* always trust cached snapped dentries, snapdir dentry */
if (ceph_snap(dir) != CEPH_NOSNAP) {
dout("d_revalidate %p '%.*s' inode %p is SNAPPED\n", dentry,
dentry->d_name.len, dentry->d_name.name, dentry->d_inode);
ceph: protect d_parent access in ceph_d_revalidate Protect d_parent with d_lock. Carry a reference. Simplify the flow so that there is a single exit point and cleanup. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:30:43 +08:00
valid = 1;
} else if (dentry->d_inode &&
ceph_snap(dentry->d_inode) == CEPH_SNAPDIR) {
valid = 1;
} else if (dentry_lease_is_valid(dentry) ||
dir_lease_is_valid(dir, dentry)) {
valid = 1;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
ceph: protect d_parent access in ceph_d_revalidate Protect d_parent with d_lock. Carry a reference. Simplify the flow so that there is a single exit point and cleanup. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:30:43 +08:00
dout("d_revalidate %p %s\n", dentry, valid ? "valid" : "invalid");
if (valid)
ceph_dentry_lru_touch(dentry);
else
d_drop(dentry);
iput(dir);
return valid;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
/*
ceph: rename dentry_release -> d_release, fix comment Just for consistency's sake. Fix obsolete comment too. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-16 05:57:41 +08:00
* Release our ceph_dentry_info.
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
*/
ceph: rename dentry_release -> d_release, fix comment Just for consistency's sake. Fix obsolete comment too. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-16 05:57:41 +08:00
static void ceph_d_release(struct dentry *dentry)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
struct ceph_dentry_info *di = ceph_dentry(dentry);
ceph: rename dentry_release -> d_release, fix comment Just for consistency's sake. Fix obsolete comment too. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-16 05:57:41 +08:00
dout("d_release %p\n", dentry);
ceph: remove unnecessary d_fsdata conditional checks We now set d_fsdata unconditionally on all dentries prior to setting up the d_ops, so all of these checks are unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-12 01:48:53 +08:00
ceph_dentry_lru_del(dentry);
if (di->lease_session)
ceph_put_mds_session(di->lease_session);
kmem_cache_free(ceph_dentry_cachep, di);
dentry->d_fsdata = NULL;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
static int ceph_snapdir_d_revalidate(struct dentry *dentry,
stop passing nameidata * to ->d_revalidate() Just the lookup flags. Die, bastard, die... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-11 04:03:43 +08:00
unsigned int flags)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
/*
* Eventually, we'll want to revalidate snapped metadata
* too... probably...
*/
return 1;
}
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-04 00:23:36 +08:00
/*
* Set/clear/test dir complete flag on the dir's dentry.
*/
void ceph_dir_set_complete(struct inode *inode)
{
ceph: enable/disable dentry complete flags via mount option Enable/disable use of the dentry dir 'complete' flag via a mount option. This lets the admin control whether ceph uses the dcache to satisfy negative lookups or readdir when it has the entire directory contents in its cache. This is purely a performance optimization; correctness is guaranteed whether it is enabled or not. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-11 01:12:55 +08:00
struct dentry *dentry = d_find_any_alias(inode);
if (dentry && ceph_dentry(dentry) &&
ceph_test_mount_opt(ceph_sb_to_client(dentry->d_sb), DCACHE)) {
dout(" marking %p (%p) complete\n", inode, dentry);
set_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
}
dput(dentry);
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-04 00:23:36 +08:00
}
void ceph_dir_clear_complete(struct inode *inode)
{
ceph: enable/disable dentry complete flags via mount option Enable/disable use of the dentry dir 'complete' flag via a mount option. This lets the admin control whether ceph uses the dcache to satisfy negative lookups or readdir when it has the entire directory contents in its cache. This is purely a performance optimization; correctness is guaranteed whether it is enabled or not. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-11 01:12:55 +08:00
struct dentry *dentry = d_find_any_alias(inode);
if (dentry && ceph_dentry(dentry)) {
dout(" marking %p (%p) complete\n", inode, dentry);
set_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
}
dput(dentry);
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-04 00:23:36 +08:00
}
bool ceph_dir_test_complete(struct inode *inode)
{
ceph: enable/disable dentry complete flags via mount option Enable/disable use of the dentry dir 'complete' flag via a mount option. This lets the admin control whether ceph uses the dcache to satisfy negative lookups or readdir when it has the entire directory contents in its cache. This is purely a performance optimization; correctness is guaranteed whether it is enabled or not. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-11 01:12:55 +08:00
struct dentry *dentry = d_find_any_alias(inode);
if (dentry && ceph_dentry(dentry)) {
dout(" marking %p (%p) NOT complete\n", inode, dentry);
clear_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
}
dput(dentry);
ceph: use new D_COMPLETE dentry flag We used to use a flag on the directory inode to track whether the dcache contents for a directory were a complete cached copy. Switch to a dentry flag CEPH_D_COMPLETE that is safely updated by ->d_prune(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-04 00:23:36 +08:00
return false;
}
ceph: clear parent D_COMPLETE flag when on dentry prune When the VFS prunes a dentry from the cache, clear the D_COMPLETE flag on the parent dentry. Do this for the live and snapshotted namespaces. Do not bother for the .snap dir contents, since we do not cache that. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-16 06:53:40 +08:00
/*
* When the VFS prunes a dentry from the cache, we need to clear the
* complete flag on the parent directory.
*
* Called under dentry->d_lock.
*/
static void ceph_d_prune(struct dentry *dentry)
{
struct ceph_dentry_info *di;
ceph: initialize root dentry Set up d_fsdata on the root dentry. This fixes a NULL pointer dereference in ceph_d_prune on umount. It also means we can eventually strip out all of the conditional checks on d_fsdata because it is now set unconditionally (prior to setting up the d_ops). Fix the ceph_d_prune debug print while we're here. Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-12 01:48:08 +08:00
dout("ceph_d_prune %p\n", dentry);
ceph: clear parent D_COMPLETE flag when on dentry prune When the VFS prunes a dentry from the cache, clear the D_COMPLETE flag on the parent dentry. Do this for the live and snapshotted namespaces. Do not bother for the .snap dir contents, since we do not cache that. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-16 06:53:40 +08:00
/* do we have a valid parent? */
if (!dentry->d_parent || IS_ROOT(dentry))
return;
/* if we are not hashed, we don't affect D_COMPLETE */
if (d_unhashed(dentry))
return;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: clear parent D_COMPLETE flag when on dentry prune When the VFS prunes a dentry from the cache, clear the D_COMPLETE flag on the parent dentry. Do this for the live and snapshotted namespaces. Do not bother for the .snap dir contents, since we do not cache that. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-16 06:53:40 +08:00
/*
* we hold d_lock, so d_parent is stable, and d_fsdata is never
* cleared until d_release
*/
di = ceph_dentry(dentry->d_parent);
clear_bit(CEPH_D_COMPLETE, &di->flags);
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* read() on a dir. This weird interface hack only works if mounted
* with '-o dirstat'.
*/
static ssize_t ceph_read_dir(struct file *file, char __user *buf, size_t size,
loff_t *ppos)
{
struct ceph_file_info *cf = file->private_data;
struct inode *inode = file->f_dentry->d_inode;
struct ceph_inode_info *ci = ceph_inode(inode);
int left;
ceph: use snprintf for dirstat content We allocate a buffer for rstats if the dirstat option is enabled. Use snprintf. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-13 05:28:05 +08:00
const int bufsize = 1024;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (!ceph_test_mount_opt(ceph_sb_to_client(inode->i_sb), DIRSTAT))
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return -EISDIR;
if (!cf->dir_info) {
ceph: use snprintf for dirstat content We allocate a buffer for rstats if the dirstat option is enabled. Use snprintf. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-13 05:28:05 +08:00
cf->dir_info = kmalloc(bufsize, GFP_NOFS);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (!cf->dir_info)
return -ENOMEM;
cf->dir_info_len =
ceph: use snprintf for dirstat content We allocate a buffer for rstats if the dirstat option is enabled. Use snprintf. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-13 05:28:05 +08:00
snprintf(cf->dir_info, bufsize,
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
"entries: %20lld\n"
" files: %20lld\n"
" subdirs: %20lld\n"
"rentries: %20lld\n"
" rfiles: %20lld\n"
" rsubdirs: %20lld\n"
"rbytes: %20lld\n"
"rctime: %10ld.%09ld\n",
ci->i_files + ci->i_subdirs,
ci->i_files,
ci->i_subdirs,
ci->i_rfiles + ci->i_rsubdirs,
ci->i_rfiles,
ci->i_rsubdirs,
ci->i_rbytes,
(long)ci->i_rctime.tv_sec,
(long)ci->i_rctime.tv_nsec);
}
if (*ppos >= cf->dir_info_len)
return 0;
size = min_t(unsigned, size, cf->dir_info_len-*ppos);
left = copy_to_user(buf, cf->dir_info + *ppos, size);
if (left == size)
return -EFAULT;
*ppos += (size - left);
return size - left;
}
/*
* an fsync() on a dir will wait for any uncommitted directory
* operations to commit.
*/
fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers Btrfs needs to be able to control how filemap_write_and_wait_range() is called in fsync to make it less of a painful operation, so push down taking i_mutex and the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some file systems can drop taking the i_mutex altogether it seems, like ext3 and ocfs2. For correctness sake I just pushed everything down in all cases to make sure that we keep the current behavior the same for everybody, and then each individual fs maintainer can make up their mind about what to do from there. Thanks, Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 08:44:56 +08:00
static int ceph_dir_fsync(struct file *file, loff_t start, loff_t end,
int datasync)
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
drop unused dentry argument to ->fsync Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-26 23:53:25 +08:00
struct inode *inode = file->f_path.dentry->d_inode;
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_inode_info *ci = ceph_inode(inode);
struct list_head *head = &ci->i_unsafe_dirops;
struct ceph_mds_request *req;
u64 last_tid;
int ret = 0;
dout("dir_fsync %p\n", inode);
fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers Btrfs needs to be able to control how filemap_write_and_wait_range() is called in fsync to make it less of a painful operation, so push down taking i_mutex and the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some file systems can drop taking the i_mutex altogether it seems, like ext3 and ocfs2. For correctness sake I just pushed everything down in all cases to make sure that we keep the current behavior the same for everybody, and then each individual fs maintainer can make up their mind about what to do from there. Thanks, Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 08:44:56 +08:00
ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
if (ret)
return ret;
mutex_lock(&inode->i_mutex);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
spin_lock(&ci->i_unsafe_lock);
if (list_empty(head))
goto out;
req = list_entry(head->prev,
struct ceph_mds_request, r_unsafe_dir_item);
last_tid = req->r_tid;
do {
ceph_mdsc_get_request(req);
spin_unlock(&ci->i_unsafe_lock);
ceph: avoid iput() while holding spinlock in ceph_dir_fsync ceph_mdsc_put_request() can call iput(), which can sleep. Don't do that. Fixes: #1812 Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-04 02:09:07 +08:00
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("dir_fsync %p wait on tid %llu (until %llu)\n",
inode, req->r_tid, last_tid);
if (req->r_timeout) {
ret = wait_for_completion_timeout(
&req->r_safe_completion, req->r_timeout);
if (ret > 0)
ret = 0;
else if (ret == 0)
ret = -EIO; /* timed out */
} else {
wait_for_completion(&req->r_safe_completion);
}
ceph_mdsc_put_request(req);
ceph: avoid iput() while holding spinlock in ceph_dir_fsync ceph_mdsc_put_request() can call iput(), which can sleep. Don't do that. Fixes: #1812 Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-04 02:09:07 +08:00
spin_lock(&ci->i_unsafe_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (ret || list_empty(head))
break;
req = list_entry(head->next,
struct ceph_mds_request, r_unsafe_dir_item);
} while (req->r_tid < last_tid);
out:
spin_unlock(&ci->i_unsafe_lock);
fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers Btrfs needs to be able to control how filemap_write_and_wait_range() is called in fsync to make it less of a painful operation, so push down taking i_mutex and the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some file systems can drop taking the i_mutex altogether it seems, like ext3 and ocfs2. For correctness sake I just pushed everything down in all cases to make sure that we keep the current behavior the same for everybody, and then each individual fs maintainer can make up their mind about what to do from there. Thanks, Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-17 08:44:56 +08:00
mutex_unlock(&inode->i_mutex);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return ret;
}
/*
* We maintain a private dentry LRU.
*
* FIXME: this needs to be changed to a per-mds lru to be useful.
*/
void ceph_dentry_lru_add(struct dentry *dn)
{
struct ceph_dentry_info *di = ceph_dentry(dn);
struct ceph_mds_client *mdsc;
ceph: add feature bits to connection handshake (protocol change) Define supported and required feature set. Fail connection if the server requires features we do not support (TAG_FEATURES), or if the server does not support features we require. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 01:30:21 +08:00
dout("dentry_lru_add %p %p '%.*s'\n", di, dn,
dn->d_name.len, dn->d_name.name);
ceph: remove unnecessary d_fsdata conditional checks We now set d_fsdata unconditionally on all dentries prior to setting up the d_ops, so all of these checks are unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-12 01:48:53 +08:00
mdsc = ceph_sb_to_client(dn->d_sb)->mdsc;
spin_lock(&mdsc->dentry_lru_lock);
list_add_tail(&di->lru, &mdsc->dentry_lru);
mdsc->num_dentry++;
spin_unlock(&mdsc->dentry_lru_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
void ceph_dentry_lru_touch(struct dentry *dn)
{
struct ceph_dentry_info *di = ceph_dentry(dn);
struct ceph_mds_client *mdsc;
ceph: set dn offset when spliced We want to assign an offset when the dentry goes from null to linked, which is always done by splice_dentry(). Notably, we should NOT assign an offset when a dentry is first created and is still null. BUG if we try to splice a non-null dentry (we shouldn't). Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-04 13:08:02 +08:00
dout("dentry_lru_touch %p %p '%.*s' (offset %lld)\n", di, dn,
dn->d_name.len, dn->d_name.name, di->offset);
ceph: remove unnecessary d_fsdata conditional checks We now set d_fsdata unconditionally on all dentries prior to setting up the d_ops, so all of these checks are unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-12 01:48:53 +08:00
mdsc = ceph_sb_to_client(dn->d_sb)->mdsc;
spin_lock(&mdsc->dentry_lru_lock);
list_move_tail(&di->lru, &mdsc->dentry_lru);
spin_unlock(&mdsc->dentry_lru_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
void ceph_dentry_lru_del(struct dentry *dn)
{
struct ceph_dentry_info *di = ceph_dentry(dn);
struct ceph_mds_client *mdsc;
ceph: add feature bits to connection handshake (protocol change) Define supported and required feature set. Fail connection if the server requires features we do not support (TAG_FEATURES), or if the server does not support features we require. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-24 01:30:21 +08:00
dout("dentry_lru_del %p %p '%.*s'\n", di, dn,
dn->d_name.len, dn->d_name.name);
ceph: remove unnecessary d_fsdata conditional checks We now set d_fsdata unconditionally on all dentries prior to setting up the d_ops, so all of these checks are unnecessary. Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-12 01:48:53 +08:00
mdsc = ceph_sb_to_client(dn->d_sb)->mdsc;
spin_lock(&mdsc->dentry_lru_lock);
list_del_init(&di->lru);
mdsc->num_dentry--;
spin_unlock(&mdsc->dentry_lru_lock);
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
ceph: add dir_layout to inode Add a ceph_dir_layout to the inode, and calculate dentry hash values based on the parent directory's specified dir_hash function. This is needed because the old default Linux dcache hash function is extremely week and leads to a poor distribution of files among dir fragments. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-17 03:14:34 +08:00
/*
* Return name hash for a given dentry. This is dependent on
* the parent directory's hash function.
*/
ceph: avoid d_parent in ceph_dentry_hash; fix ceph_encode_fh() hashing bug Have caller pass in a safely-obtained reference to the parent directory for calculating a dentry's hash valud. While we're here, simpify the flow through ceph_encode_fh() so that there is a single exit point and cleanup. Also fix a bug with the dentry hash calculation: calculate the hash for the dentry we were given, not its parent. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:30:55 +08:00
unsigned ceph_dentry_hash(struct inode *dir, struct dentry *dn)
ceph: add dir_layout to inode Add a ceph_dir_layout to the inode, and calculate dentry hash values based on the parent directory's specified dir_hash function. This is needed because the old default Linux dcache hash function is extremely week and leads to a poor distribution of files among dir fragments. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-17 03:14:34 +08:00
{
struct ceph_inode_info *dci = ceph_inode(dir);
switch (dci->i_dir_layout.dl_dir_hash) {
case 0: /* for backward compat */
case CEPH_STR_HASH_LINUX:
return dn->d_name.hash;
default:
return ceph_str_hash(dci->i_dir_layout.dl_dir_hash,
dn->d_name.name, dn->d_name.len);
}
}
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
const struct file_operations ceph_dir_fops = {
.read = ceph_read_dir,
.readdir = ceph_readdir,
.llseek = ceph_dir_llseek,
.open = ceph_open,
.release = ceph_release,
.unlocked_ioctl = ceph_ioctl,
.fsync = ceph_dir_fsync,
};
const struct inode_operations ceph_dir_iops = {
.lookup = ceph_lookup,
.permission = ceph_permission,
.getattr = ceph_getattr,
.setattr = ceph_setattr,
.setxattr = ceph_setxattr,
.getxattr = ceph_getxattr,
.listxattr = ceph_listxattr,
.removexattr = ceph_removexattr,
.mknod = ceph_mknod,
.symlink = ceph_symlink,
.mkdir = ceph_mkdir,
.link = ceph_link,
.unlink = ceph_unlink,
.rmdir = ceph_unlink,
.rename = ceph_rename,
.create = ceph_create,
ceph: implement i_op->atomic_open() Add an ->atomic_open implementation which replaces the atomic lookup+open+create operation implemented via ->lookup and ->create operations. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-05 21:10:25 +08:00
.atomic_open = ceph_atomic_open,
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
};
ceph: constify dentry_operations This makes checkpatch happy. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-04 01:25:30 +08:00
const struct dentry_operations ceph_dentry_ops = {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
.d_revalidate = ceph_d_revalidate,
ceph: rename dentry_release -> d_release, fix comment Just for consistency's sake. Fix obsolete comment too. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-16 05:57:41 +08:00
.d_release = ceph_d_release,
ceph: clear parent D_COMPLETE flag when on dentry prune When the VFS prunes a dentry from the cache, clear the D_COMPLETE flag on the parent dentry. Do this for the live and snapshotted namespaces. Do not bother for the .snap dir contents, since we do not cache that. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-16 06:53:40 +08:00
.d_prune = ceph_d_prune,
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
};
ceph: constify dentry_operations This makes checkpatch happy. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-04 01:25:30 +08:00
const struct dentry_operations ceph_snapdir_dentry_ops = {
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
.d_revalidate = ceph_snapdir_d_revalidate,
ceph: rename dentry_release -> d_release, fix comment Just for consistency's sake. Fix obsolete comment too. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-16 05:57:41 +08:00
.d_release = ceph_d_release,
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
};
ceph: constify dentry_operations This makes checkpatch happy. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-04 01:25:30 +08:00
const struct dentry_operations ceph_snap_dentry_ops = {
ceph: rename dentry_release -> d_release, fix comment Just for consistency's sake. Fix obsolete comment too. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-16 05:57:41 +08:00
.d_release = ceph_d_release,
ceph: clear parent D_COMPLETE flag when on dentry prune When the VFS prunes a dentry from the cache, clear the D_COMPLETE flag on the parent dentry. Do this for the live and snapshotted namespaces. Do not bother for the .snap dir contents, since we do not cache that. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-16 06:53:40 +08:00
.d_prune = ceph_d_prune,
ceph: directory operations Directory operations, including lookup, are defined here. We take advantage of lookup intents when possible. For the most part, we just need to build the proper requests for the metadata server(s) and pass things off to the mds_client. The results of most operations are normally incorporated into the client's cache when the reply is parsed by ceph_fill_trace(). However, if the MDS replies without a trace (e.g., when retrying an update after an MDS failure recovery), some operation-specific cleanup may be needed. We can validate cached dentries in two ways. A per-dentry lease may be issued by the MDS, or a per-directory cap may be issued that acts as a lease on the entire directory. In the latter case, a 'gen' value is used to determine which dentries belong to the currently leased directory contents. We normally prepopulate the dcache and icache with readdir results. This makes subsequent lookups and getattrs avoid any server interaction. It also lets us satisfy readdir operation by peeking at the dcache IFF we hold the per-directory cap/lease, previously performed a readdir, and haven't dropped any of the resulting dentries. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
};