UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c

784 lines
24 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29 22:17:56 +08:00
// SPDX-License-Identifier: GPL-2.0-only
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
/*
* Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
*
* Based on ccu-sun8i-h3.c, which is:
* Copyright (c) 2016 Maxime Ripard. All rights reserved.
*/
#include <linux/clk-provider.h>
clk: Remove io.h from clk-provider.h Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-19 06:20:22 +08:00
#include <linux/io.h>
clk: sunxi-ng: Convert early providers to platform drivers The PRCM CCU drivers depend on clocks provided by other CCU drivers. For example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by the SoC's main CCU. However, sun8i-r-ccu is an early OF clock provider, and many of the main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that the consumer clocks will be orphaned until the supplier driver is bound. This can be avoided by converting the remaining CCUs to use platform drivers. Then fw_devlink will ensure the drivers are bound in the optimal order. The sun5i CCU is the only one which actually needs to be an early clock provider, because it provides the clock for the system timer. That one is left alone. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-4-samuel@sholland.org
2021-11-19 11:33:36 +08:00
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
#include "ccu_common.h"
#include "ccu_reset.h"
#include "ccu_div.h"
#include "ccu_gate.h"
#include "ccu_mp.h"
#include "ccu_mult.h"
#include "ccu_nk.h"
#include "ccu_nkm.h"
#include "ccu_nkmp.h"
#include "ccu_nm.h"
#include "ccu_phase.h"
#include "ccu-sun8i-v3s.h"
static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpu_clk, "pll-cpu",
"osc24M", 0x000,
8, 5, /* N */
4, 2, /* K */
0, 2, /* M */
16, 2, /* P */
BIT(31), /* gate */
BIT(28), /* lock */
0);
/*
* The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
* the base (2x, 4x and 8x), and one variable divider (the one true
* pll audio).
*
clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll Previously it was not possible to achieve clock rates of 24.576MHz and 22.5792MHz, which are commonly required core clocks for the i2s peripheral of v3s based SoCs. Add support for those clock rates through the audio pll's sigma-delta modulator. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210218112001.479018-2-t.schramm@manjaro.org
2021-02-18 19:20:01 +08:00
* With sigma-delta modulation for fractional-N on the audio PLL,
* we have to use specific dividers. This means the variable divider
* can no longer be used, as the audio codec requests the exact clock
* rates we support through this mechanism. So we now hard code the
* variable divider to 1. This means the clock rates will no longer
* match the clock names.
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
*/
#define SUN8I_V3S_PLL_AUDIO_REG 0x008
clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll Previously it was not possible to achieve clock rates of 24.576MHz and 22.5792MHz, which are commonly required core clocks for the i2s peripheral of v3s based SoCs. Add support for those clock rates through the audio pll's sigma-delta modulator. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210218112001.479018-2-t.schramm@manjaro.org
2021-02-18 19:20:01 +08:00
static struct ccu_sdm_setting pll_audio_sdm_table[] = {
{ .rate = 22579200, .pattern = 0xc0010d84, .m = 8, .n = 7 },
{ .rate = 24576000, .pattern = 0xc000ac02, .m = 14, .n = 14 },
};
static SUNXI_CCU_NM_WITH_SDM_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
"osc24M", 0x008,
8, 7, /* N */
0, 5, /* M */
pll_audio_sdm_table, BIT(24),
0x284, BIT(31),
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
"osc24M", 0x0010,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
0);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
"osc24M", 0x0018,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
0);
clk: sunxi-ng: v3s: add the missing PLL_DDR1 The user manual of V3/V3s/S3 declares a PLL_DDR1, however it's forgot when developing the V3s CCU driver. Add back the missing PLL_DDR1. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-13 11:46:28 +08:00
static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
"osc24M", 0x020,
8, 5, /* N */
4, 2, /* K */
0, 2, /* M */
BIT(31), /* gate */
BIT(28), /* lock */
0);
static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph0_clk, "pll-periph0",
"osc24M", 0x028,
8, 5, /* N */
4, 2, /* K */
BIT(31), /* gate */
BIT(28), /* lock */
2, /* post-div */
0);
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_isp_clk, "pll-isp",
"osc24M", 0x002c,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
0);
static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph1_clk, "pll-periph1",
"osc24M", 0x044,
8, 5, /* N */
4, 2, /* K */
BIT(31), /* gate */
BIT(28), /* lock */
2, /* post-div */
0);
clk: sunxi-ng: v3s: add the missing PLL_DDR1 The user manual of V3/V3s/S3 declares a PLL_DDR1, however it's forgot when developing the V3s CCU driver. Add back the missing PLL_DDR1. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-13 11:46:28 +08:00
static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
"osc24M", 0x04c,
8, 7, /* N */
0, 2, /* M */
BIT(31), /* gate */
BIT(28), /* lock */
0);
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
static const char * const cpu_parents[] = { "osc32k", "osc24M",
"pll-cpu", "pll-cpu" };
static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
0x050, 16, 2, CLK_IS_CRITICAL);
static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
static const char * const ahb1_parents[] = { "osc32k", "osc24M",
"axi", "pll-periph0" };
clk: sunxi-ng: Support multiple variable pre-dividers On the A83T, the AHB1 clock has a shared pre-divider on the two PLL-PERIPH clock parents. To support such instances of shared pre-dividers, this patch extends the mux clock type to support multiple variable pre-dividers. As the pre-dividers are only used to calculate the rate, but do not participate in the factorization process, this is fairly straightforward. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-19 15:06:08 +08:00
static const struct ccu_mux_var_prediv ahb1_predivs[] = {
{ .index = 3, .shift = 6, .width = 2 },
};
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
static struct ccu_div ahb1_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = {
.shift = 12,
.width = 2,
clk: sunxi-ng: Support multiple variable pre-dividers On the A83T, the AHB1 clock has a shared pre-divider on the two PLL-PERIPH clock parents. To support such instances of shared pre-dividers, this patch extends the mux clock type to support multiple variable pre-dividers. As the pre-dividers are only used to calculate the rate, but do not participate in the factorization process, this is fairly straightforward. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-19 15:06:08 +08:00
.var_predivs = ahb1_predivs,
.n_var_predivs = ARRAY_SIZE(ahb1_predivs),
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
},
.common = {
.reg = 0x054,
.features = CCU_FEATURE_VARIABLE_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("ahb1",
ahb1_parents,
&ccu_div_ops,
0),
},
};
static struct clk_div_table apb1_div_table[] = {
{ .val = 0, .div = 2 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 4 },
{ .val = 3, .div = 8 },
{ /* Sentinel */ },
};
static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
0x054, 8, 2, apb1_div_table, 0);
static const char * const apb2_parents[] = { "osc32k", "osc24M",
"pll-periph0", "pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
0, 5, /* M */
16, 2, /* P */
24, 2, /* mux */
0);
static const char * const ahb2_parents[] = { "ahb1", "pll-periph0" };
static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
{ .index = 1, .div = 2 },
};
static struct ccu_mux ahb2_clk = {
.mux = {
.shift = 0,
.width = 1,
.fixed_predivs = ahb2_fixed_predivs,
.n_predivs = ARRAY_SIZE(ahb2_fixed_predivs),
},
.common = {
.reg = 0x05c,
.features = CCU_FEATURE_FIXED_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("ahb2",
ahb2_parents,
&ccu_mux_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
0x060, BIT(5), 0);
static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
0x060, BIT(6), 0);
static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
0x060, BIT(8), 0);
static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
0x060, BIT(9), 0);
static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
0x060, BIT(10), 0);
static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
0x060, BIT(14), 0);
static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb2",
0x060, BIT(17), 0);
static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
0x060, BIT(19), 0);
static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
0x060, BIT(20), 0);
static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
0x060, BIT(24), 0);
static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
0x060, BIT(26), 0);
static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
0x060, BIT(29), 0);
static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
0x064, BIT(0), 0);
static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
0x064, BIT(4), 0);
static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb1",
0x064, BIT(8), 0);
static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
0x064, BIT(12), 0);
static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
0x068, BIT(0), 0);
static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
0x068, BIT(5), 0);
clk: sunxi-ng: v3s: add Allwinner V3 support Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-28 11:12:24 +08:00
static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
0x068, BIT(12), 0);
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
0x06c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
0x06c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
0x06c, BIT(16), 0);
static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
0x06c, BIT(17), 0);
static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
0x06c, BIT(18), 0);
static SUNXI_CCU_GATE(bus_ephy_clk, "bus-ephy", "ahb1",
0x070, BIT(0), 0);
static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
0x070, BIT(7), 0);
static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
"pll-periph1" };
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
0x088, 20, 3, 0);
static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
0x088, 8, 3, 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
0x08c, 20, 3, 0);
static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
0x08c, 8, 3, 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
0x090, 20, 3, 0);
static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
0x090, 8, 3, 0);
static const char * const ce_parents[] = { "osc24M", "pll-periph0", };
static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
clk: sunxi-ng: v3s: add Allwinner V3 support Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-28 11:12:24 +08:00
static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
"pll-audio-2x", "pll-audio" };
static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
0x0cc, BIT(8), 0);
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M",
0x0cc, BIT(16), 0);
clk: sunxi-ng: v3s: add the missing PLL_DDR1 The user manual of V3/V3s/S3 declares a PLL_DDR1, however it's forgot when developing the V3s CCU driver. Add back the missing PLL_DDR1. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-13 11:46:28 +08:00
static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1",
"pll-periph0-2x" };
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
0x100, BIT(0), 0);
static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "dram",
0x100, BIT(1), 0);
static SUNXI_CCU_GATE(dram_ehci_clk, "dram-ehci", "dram",
0x100, BIT(17), 0);
static SUNXI_CCU_GATE(dram_ohci_clk, "dram-ohci", "dram",
0x100, BIT(18), 0);
static const char * const de_parents[] = { "pll-video", "pll-periph0" };
static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
clk: sunxi-ng: Allow DE clock to set parent rate DE2/DE3 mixers have to run at specific frequency in order to work optimally. This wasn't actually possible for some SoCs because "de" clock wasn't allowed to adjust parent rate. Add CLK_SET_RATE_PARENT flag to all "de" clocks which didn't have it yet. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-01 04:03:27 +08:00
0x104, 0, 4, 24, 2, BIT(31),
CLK_SET_RATE_PARENT);
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
static const char * const tcon_parents[] = { "pll-video" };
static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
0x118, 0, 4, 24, 3, BIT(31), 0);
static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M",
0x130, BIT(31), 0);
static const char * const csi_mclk_parents[] = { "osc24M", "pll-video",
"pll-periph0", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
0x130, 0, 5, 8, 3, BIT(15), 0);
static const char * const csi1_sclk_parents[] = { "pll-video", "pll-isp" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi1_sclk_clk, "csi-sclk", csi1_sclk_parents,
0x134, 16, 4, 24, 3, BIT(31), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi-mclk", csi_mclk_parents,
0x134, 0, 5, 8, 3, BIT(15), 0);
static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
0x13c, 16, 3, BIT(31), 0);
static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio",
0x140, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
0x144, BIT(31), 0);
static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
"pll-ddr" };
static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
static const char * const mipi_csi_parents[] = { "pll-video", "pll-periph0",
"pll-isp" };
static SUNXI_CCU_M_WITH_MUX_GATE(mipi_csi_clk, "mipi-csi", mipi_csi_parents,
0x16c, 0, 3, 24, 2, BIT(31), 0);
static struct ccu_common *sun8i_v3s_ccu_clks[] = {
&pll_cpu_clk.common,
&pll_audio_base_clk.common,
&pll_video_clk.common,
&pll_ve_clk.common,
clk: sunxi-ng: v3s: add the missing PLL_DDR1 The user manual of V3/V3s/S3 declares a PLL_DDR1, however it's forgot when developing the V3s CCU driver. Add back the missing PLL_DDR1. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-13 11:46:28 +08:00
&pll_ddr0_clk.common,
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
&pll_periph0_clk.common,
&pll_isp_clk.common,
&pll_periph1_clk.common,
clk: sunxi-ng: v3s: add the missing PLL_DDR1 The user manual of V3/V3s/S3 declares a PLL_DDR1, however it's forgot when developing the V3s CCU driver. Add back the missing PLL_DDR1. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-13 11:46:28 +08:00
&pll_ddr1_clk.common,
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
&cpu_clk.common,
&axi_clk.common,
&ahb1_clk.common,
&apb1_clk.common,
&apb2_clk.common,
&ahb2_clk.common,
&bus_ce_clk.common,
&bus_dma_clk.common,
&bus_mmc0_clk.common,
&bus_mmc1_clk.common,
&bus_mmc2_clk.common,
&bus_dram_clk.common,
&bus_emac_clk.common,
&bus_hstimer_clk.common,
&bus_spi0_clk.common,
&bus_otg_clk.common,
&bus_ehci0_clk.common,
&bus_ohci0_clk.common,
&bus_ve_clk.common,
&bus_tcon0_clk.common,
&bus_csi_clk.common,
&bus_de_clk.common,
&bus_codec_clk.common,
&bus_pio_clk.common,
clk: sunxi-ng: Deduplicate ccu_clks arrays The ccu_clks arrays are used to link ccu_common objects to a platform device during probe. There is no requirement that the clk_hw inside the ccu_common object ever gets registered with the clock framework. So the drivers do not need a separate ccu_clks array for each CCU variant. A single array per driver, containing the union of the CCU clocks from all variants, is sufficient. Let's save some space by combining the ccu_clks arrays in each driver. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220531043539.41549-1-samuel@sholland.org
2022-05-31 12:35:39 +08:00
&bus_i2s0_clk.common,
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
&bus_i2c0_clk.common,
&bus_i2c1_clk.common,
&bus_uart0_clk.common,
&bus_uart1_clk.common,
&bus_uart2_clk.common,
&bus_ephy_clk.common,
&bus_dbg_clk.common,
&mmc0_clk.common,
&mmc0_sample_clk.common,
&mmc0_output_clk.common,
&mmc1_clk.common,
&mmc1_sample_clk.common,
&mmc1_output_clk.common,
&mmc2_clk.common,
&mmc2_sample_clk.common,
&mmc2_output_clk.common,
&ce_clk.common,
&spi0_clk.common,
clk: sunxi-ng: Deduplicate ccu_clks arrays The ccu_clks arrays are used to link ccu_common objects to a platform device during probe. There is no requirement that the clk_hw inside the ccu_common object ever gets registered with the clock framework. So the drivers do not need a separate ccu_clks array for each CCU variant. A single array per driver, containing the union of the CCU clocks from all variants, is sufficient. Let's save some space by combining the ccu_clks arrays in each driver. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220531043539.41549-1-samuel@sholland.org
2022-05-31 12:35:39 +08:00
&i2s0_clk.common,
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
&usb_phy0_clk.common,
&usb_ohci0_clk.common,
&dram_clk.common,
&dram_ve_clk.common,
&dram_csi_clk.common,
&dram_ohci_clk.common,
&dram_ehci_clk.common,
&de_clk.common,
&tcon_clk.common,
&csi_misc_clk.common,
&csi0_mclk_clk.common,
&csi1_sclk_clk.common,
&csi1_mclk_clk.common,
&ve_clk.common,
&ac_dig_clk.common,
&avs_clk.common,
&mbus_clk.common,
&mipi_csi_clk.common,
};
clk: sunxi-ng: v3s: Use local parent references for CLK_FIXED_FACTOR With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-05-03 18:08:18 +08:00
static const struct clk_hw *clk_parent_pll_audio[] = {
&pll_audio_base_clk.common.hw
};
clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll Previously it was not possible to achieve clock rates of 24.576MHz and 22.5792MHz, which are commonly required core clocks for the i2s peripheral of v3s based SoCs. Add support for those clock rates through the audio pll's sigma-delta modulator. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210218112001.479018-2-t.schramm@manjaro.org
2021-02-18 19:20:01 +08:00
/* We hardcode the divider to 1 for SDM support */
clk: sunxi-ng: v3s: Use local parent references for CLK_FIXED_FACTOR With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-05-03 18:08:18 +08:00
static CLK_FIXED_FACTOR_HWS(pll_audio_clk, "pll-audio",
clk_parent_pll_audio,
clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll Previously it was not possible to achieve clock rates of 24.576MHz and 22.5792MHz, which are commonly required core clocks for the i2s peripheral of v3s based SoCs. Add support for those clock rates through the audio pll's sigma-delta modulator. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210218112001.479018-2-t.schramm@manjaro.org
2021-02-18 19:20:01 +08:00
1, 1, CLK_SET_RATE_PARENT);
clk: sunxi-ng: v3s: Use local parent references for CLK_FIXED_FACTOR With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-05-03 18:08:18 +08:00
static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
clk_parent_pll_audio,
2, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
clk_parent_pll_audio,
1, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_audio_8x_clk, "pll-audio-8x",
clk_parent_pll_audio,
1, 2, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HW(pll_periph0_2x_clk, "pll-periph0-2x",
&pll_periph0_clk.common.hw,
1, 2, 0);
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
static struct clk_hw_onecell_data sun8i_v3s_hw_clks = {
.hws = {
[CLK_PLL_CPU] = &pll_cpu_clk.common.hw,
[CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
[CLK_PLL_AUDIO] = &pll_audio_clk.hw,
[CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
[CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
[CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
[CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
clk: sunxi-ng: v3s: add the missing PLL_DDR1 The user manual of V3/V3s/S3 declares a PLL_DDR1, however it's forgot when developing the V3s CCU driver. Add back the missing PLL_DDR1. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-13 11:46:28 +08:00
[CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
[CLK_PLL_ISP] = &pll_isp_clk.common.hw,
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
clk: sunxi-ng: v3s: add the missing PLL_DDR1 The user manual of V3/V3s/S3 declares a PLL_DDR1, however it's forgot when developing the V3s CCU driver. Add back the missing PLL_DDR1. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-13 11:46:28 +08:00
[CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
[CLK_CPU] = &cpu_clk.common.hw,
[CLK_AXI] = &axi_clk.common.hw,
[CLK_AHB1] = &ahb1_clk.common.hw,
[CLK_APB1] = &apb1_clk.common.hw,
[CLK_APB2] = &apb2_clk.common.hw,
[CLK_AHB2] = &ahb2_clk.common.hw,
[CLK_BUS_CE] = &bus_ce_clk.common.hw,
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
[CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
[CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
[CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
[CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
[CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
[CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
[CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
[CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
[CLK_BUS_CSI] = &bus_csi_clk.common.hw,
[CLK_BUS_DE] = &bus_de_clk.common.hw,
[CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
[CLK_BUS_PIO] = &bus_pio_clk.common.hw,
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
[CLK_BUS_EPHY] = &bus_ephy_clk.common.hw,
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
[CLK_MMC0] = &mmc0_clk.common.hw,
[CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
[CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
[CLK_MMC1] = &mmc1_clk.common.hw,
[CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
[CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks The MMC2 clock slices are currently not defined in V3s CCU driver, which makes MMC2 not working. Fix this issue. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-28 11:12:23 +08:00
[CLK_MMC2] = &mmc2_clk.common.hw,
[CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw,
[CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw,
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
[CLK_CE] = &ce_clk.common.hw,
[CLK_SPI0] = &spi0_clk.common.hw,
[CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
[CLK_DRAM] = &dram_clk.common.hw,
[CLK_DRAM_VE] = &dram_ve_clk.common.hw,
[CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
[CLK_DRAM_EHCI] = &dram_ehci_clk.common.hw,
[CLK_DRAM_OHCI] = &dram_ohci_clk.common.hw,
[CLK_DE] = &de_clk.common.hw,
[CLK_TCON0] = &tcon_clk.common.hw,
[CLK_CSI_MISC] = &csi_misc_clk.common.hw,
[CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
[CLK_CSI1_SCLK] = &csi1_sclk_clk.common.hw,
[CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
[CLK_VE] = &ve_clk.common.hw,
[CLK_AC_DIG] = &ac_dig_clk.common.hw,
[CLK_AVS] = &avs_clk.common.hw,
[CLK_MBUS] = &mbus_clk.common.hw,
[CLK_MIPI_CSI] = &mipi_csi_clk.common.hw,
},
clk: sunxi-ng: v3s: Fix incorrect number of hw_clks. The hws field of sun8i_v3s_hw_clks has only 74 members. However, the number specified by CLK_NUMBER is 77 (= CLK_I2S0 + 1). This leads to runtime segmentation fault that is not always reproducible. This patch fixes the problem by specifying correct clock number. Signed-off-by: Yunhao Tian <18373444@buaa.edu.cn> [Maxime: Also remove the CLK_NUMBER definition] Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-25 20:58:32 +08:00
.num = CLK_PLL_DDR1 + 1,
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
};
clk: sunxi-ng: v3s: add Allwinner V3 support Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-28 11:12:24 +08:00
static struct clk_hw_onecell_data sun8i_v3_hw_clks = {
.hws = {
[CLK_PLL_CPU] = &pll_cpu_clk.common.hw,
[CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
[CLK_PLL_AUDIO] = &pll_audio_clk.hw,
[CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
[CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
[CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
[CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
[CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
[CLK_PLL_ISP] = &pll_isp_clk.common.hw,
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
[CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
[CLK_CPU] = &cpu_clk.common.hw,
[CLK_AXI] = &axi_clk.common.hw,
[CLK_AHB1] = &ahb1_clk.common.hw,
[CLK_APB1] = &apb1_clk.common.hw,
[CLK_APB2] = &apb2_clk.common.hw,
[CLK_AHB2] = &ahb2_clk.common.hw,
[CLK_BUS_CE] = &bus_ce_clk.common.hw,
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
[CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
[CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
[CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
[CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
[CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
[CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
[CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
[CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
[CLK_BUS_CSI] = &bus_csi_clk.common.hw,
[CLK_BUS_DE] = &bus_de_clk.common.hw,
[CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
[CLK_BUS_PIO] = &bus_pio_clk.common.hw,
[CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
[CLK_BUS_EPHY] = &bus_ephy_clk.common.hw,
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
[CLK_MMC0] = &mmc0_clk.common.hw,
[CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
[CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
[CLK_MMC1] = &mmc1_clk.common.hw,
[CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
[CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
[CLK_MMC2] = &mmc2_clk.common.hw,
[CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw,
[CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw,
[CLK_CE] = &ce_clk.common.hw,
[CLK_SPI0] = &spi0_clk.common.hw,
[CLK_I2S0] = &i2s0_clk.common.hw,
[CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
[CLK_DRAM] = &dram_clk.common.hw,
[CLK_DRAM_VE] = &dram_ve_clk.common.hw,
[CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
[CLK_DRAM_EHCI] = &dram_ehci_clk.common.hw,
[CLK_DRAM_OHCI] = &dram_ohci_clk.common.hw,
[CLK_DE] = &de_clk.common.hw,
[CLK_TCON0] = &tcon_clk.common.hw,
[CLK_CSI_MISC] = &csi_misc_clk.common.hw,
[CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
[CLK_CSI1_SCLK] = &csi1_sclk_clk.common.hw,
[CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
[CLK_VE] = &ve_clk.common.hw,
[CLK_AC_DIG] = &ac_dig_clk.common.hw,
[CLK_AVS] = &avs_clk.common.hw,
[CLK_MBUS] = &mbus_clk.common.hw,
[CLK_MIPI_CSI] = &mipi_csi_clk.common.hw,
},
clk: sunxi-ng: v3s: Fix incorrect number of hw_clks. The hws field of sun8i_v3s_hw_clks has only 74 members. However, the number specified by CLK_NUMBER is 77 (= CLK_I2S0 + 1). This leads to runtime segmentation fault that is not always reproducible. This patch fixes the problem by specifying correct clock number. Signed-off-by: Yunhao Tian <18373444@buaa.edu.cn> [Maxime: Also remove the CLK_NUMBER definition] Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-25 20:58:32 +08:00
.num = CLK_I2S0 + 1,
clk: sunxi-ng: v3s: add Allwinner V3 support Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-28 11:12:24 +08:00
};
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
[RST_USB_PHY0] = { 0x0cc, BIT(0) },
[RST_MBUS] = { 0x0fc, BIT(31) },
[RST_BUS_CE] = { 0x2c0, BIT(5) },
[RST_BUS_DMA] = { 0x2c0, BIT(6) },
[RST_BUS_MMC0] = { 0x2c0, BIT(8) },
[RST_BUS_MMC1] = { 0x2c0, BIT(9) },
[RST_BUS_MMC2] = { 0x2c0, BIT(10) },
[RST_BUS_DRAM] = { 0x2c0, BIT(14) },
[RST_BUS_EMAC] = { 0x2c0, BIT(17) },
[RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
[RST_BUS_SPI0] = { 0x2c0, BIT(20) },
clk: sunxi-ng: v3s: Fix usb otg device reset bit V3S's usb otg device reset bit should be 24, not 23. Cc: stable@vger.kernel.org Signed-off-by: Yong Deng <iemdey@gmail.com> Reviewed-By: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-05 18:31:57 +08:00
[RST_BUS_OTG] = { 0x2c0, BIT(24) },
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
[RST_BUS_EHCI0] = { 0x2c0, BIT(26) },
[RST_BUS_OHCI0] = { 0x2c0, BIT(29) },
[RST_BUS_VE] = { 0x2c4, BIT(0) },
clk: sunxi-ng: v3s: Fix TCON reset de-assert bit According to the datasheet and the reference code from Allwinner, the bit used to de-assert the TCON reset is bit 4, not bit 3. Fix it in the V3s CCU driver. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-22 16:16:19 +08:00
[RST_BUS_TCON0] = { 0x2c4, BIT(4) },
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
[RST_BUS_CSI] = { 0x2c4, BIT(8) },
[RST_BUS_DE] = { 0x2c4, BIT(12) },
[RST_BUS_DBG] = { 0x2c4, BIT(31) },
[RST_BUS_EPHY] = { 0x2c8, BIT(2) },
[RST_BUS_CODEC] = { 0x2d0, BIT(0) },
[RST_BUS_I2C0] = { 0x2d8, BIT(0) },
[RST_BUS_I2C1] = { 0x2d8, BIT(1) },
[RST_BUS_UART0] = { 0x2d8, BIT(16) },
[RST_BUS_UART1] = { 0x2d8, BIT(17) },
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
};
clk: sunxi-ng: v3s: add Allwinner V3 support Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-28 11:12:24 +08:00
static struct ccu_reset_map sun8i_v3_ccu_resets[] = {
[RST_USB_PHY0] = { 0x0cc, BIT(0) },
[RST_MBUS] = { 0x0fc, BIT(31) },
[RST_BUS_CE] = { 0x2c0, BIT(5) },
[RST_BUS_DMA] = { 0x2c0, BIT(6) },
[RST_BUS_MMC0] = { 0x2c0, BIT(8) },
[RST_BUS_MMC1] = { 0x2c0, BIT(9) },
[RST_BUS_MMC2] = { 0x2c0, BIT(10) },
[RST_BUS_DRAM] = { 0x2c0, BIT(14) },
[RST_BUS_EMAC] = { 0x2c0, BIT(17) },
[RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
[RST_BUS_SPI0] = { 0x2c0, BIT(20) },
[RST_BUS_OTG] = { 0x2c0, BIT(24) },
[RST_BUS_EHCI0] = { 0x2c0, BIT(26) },
[RST_BUS_OHCI0] = { 0x2c0, BIT(29) },
[RST_BUS_VE] = { 0x2c4, BIT(0) },
[RST_BUS_TCON0] = { 0x2c4, BIT(4) },
[RST_BUS_CSI] = { 0x2c4, BIT(8) },
[RST_BUS_DE] = { 0x2c4, BIT(12) },
[RST_BUS_DBG] = { 0x2c4, BIT(31) },
[RST_BUS_EPHY] = { 0x2c8, BIT(2) },
[RST_BUS_CODEC] = { 0x2d0, BIT(0) },
[RST_BUS_I2S0] = { 0x2d0, BIT(12) },
[RST_BUS_I2C0] = { 0x2d8, BIT(0) },
[RST_BUS_I2C1] = { 0x2d8, BIT(1) },
[RST_BUS_UART0] = { 0x2d8, BIT(16) },
[RST_BUS_UART1] = { 0x2d8, BIT(17) },
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
};
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = {
.ccu_clks = sun8i_v3s_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun8i_v3s_ccu_clks),
.hw_clks = &sun8i_v3s_hw_clks,
.resets = sun8i_v3s_ccu_resets,
.num_resets = ARRAY_SIZE(sun8i_v3s_ccu_resets),
};
clk: sunxi-ng: v3s: add Allwinner V3 support Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-28 11:12:24 +08:00
static const struct sunxi_ccu_desc sun8i_v3_ccu_desc = {
clk: sunxi-ng: Deduplicate ccu_clks arrays The ccu_clks arrays are used to link ccu_common objects to a platform device during probe. There is no requirement that the clk_hw inside the ccu_common object ever gets registered with the clock framework. So the drivers do not need a separate ccu_clks array for each CCU variant. A single array per driver, containing the union of the CCU clocks from all variants, is sufficient. Let's save some space by combining the ccu_clks arrays in each driver. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220531043539.41549-1-samuel@sholland.org
2022-05-31 12:35:39 +08:00
.ccu_clks = sun8i_v3s_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun8i_v3s_ccu_clks),
clk: sunxi-ng: v3s: add Allwinner V3 support Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-28 11:12:24 +08:00
.hw_clks = &sun8i_v3_hw_clks,
.resets = sun8i_v3_ccu_resets,
.num_resets = ARRAY_SIZE(sun8i_v3_ccu_resets),
};
clk: sunxi-ng: Convert early providers to platform drivers The PRCM CCU drivers depend on clocks provided by other CCU drivers. For example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by the SoC's main CCU. However, sun8i-r-ccu is an early OF clock provider, and many of the main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that the consumer clocks will be orphaned until the supplier driver is bound. This can be avoided by converting the remaining CCUs to use platform drivers. Then fw_devlink will ensure the drivers are bound in the optimal order. The sun5i CCU is the only one which actually needs to be an early clock provider, because it provides the clock for the system timer. That one is left alone. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-4-samuel@sholland.org
2021-11-19 11:33:36 +08:00
static int sun8i_v3s_ccu_probe(struct platform_device *pdev)
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
{
clk: sunxi-ng: Convert early providers to platform drivers The PRCM CCU drivers depend on clocks provided by other CCU drivers. For example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by the SoC's main CCU. However, sun8i-r-ccu is an early OF clock provider, and many of the main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that the consumer clocks will be orphaned until the supplier driver is bound. This can be avoided by converting the remaining CCUs to use platform drivers. Then fw_devlink will ensure the drivers are bound in the optimal order. The sun5i CCU is the only one which actually needs to be an early clock provider, because it provides the clock for the system timer. That one is left alone. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-4-samuel@sholland.org
2021-11-19 11:33:36 +08:00
const struct sunxi_ccu_desc *desc;
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
void __iomem *reg;
u32 val;
clk: sunxi-ng: Convert early providers to platform drivers The PRCM CCU drivers depend on clocks provided by other CCU drivers. For example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by the SoC's main CCU. However, sun8i-r-ccu is an early OF clock provider, and many of the main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that the consumer clocks will be orphaned until the supplier driver is bound. This can be avoided by converting the remaining CCUs to use platform drivers. Then fw_devlink will ensure the drivers are bound in the optimal order. The sun5i CCU is the only one which actually needs to be an early clock provider, because it provides the clock for the system timer. That one is left alone. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-4-samuel@sholland.org
2021-11-19 11:33:36 +08:00
desc = of_device_get_match_data(&pdev->dev);
if (!desc)
return -EINVAL;
reg = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(reg))
return PTR_ERR(reg);
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
clk: sunxi-ng: v3s: fix incorrect postdivider on pll-audio Commit 46060be6d840 ("clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll") changed the audio pll on the Allwinner V3s and V3 SoCs to use sigma-delta modulation. In the process the declaration of fixed postdivider providing "pll-audio" was adjusted to provide the desired clock rates from the now sigma-delta modulated pll. However, while the divider used for calculations by the clock framework was adjusted the actual divider programmed into the hardware in sun8i_v3_v3s_ccu_init was left at "divide by four". This broke the "pll-audio" clock, now only providing quater the expected clock rate. It would in general be desirable to program the postdivider for "pll-audio" to four, such that a broader range of frequencies were available on the pll outputs. But the clock for the integrated codec "ac-dig" does not feature a mux that allows to select from all pll outputs as it is just a simple clock gate connected to "pll-audio". Thus we need to set the postdivider to one to be able to provide the 22.5792MHz and 24.576MHz rates required by the internal sun4i codec. This patches fixes the incorrect clock rate by forcing the postdivider to one in sun8i_v3_v3s_ccu_init. Fixes: 46060be6d840 ("clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll") Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210513131315.2059451-1-t.schramm@manjaro.org
2021-05-13 21:13:15 +08:00
/* Force the PLL-Audio-1x divider to 1 */
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
val = readl(reg + SUN8I_V3S_PLL_AUDIO_REG);
val &= ~GENMASK(19, 16);
clk: sunxi-ng: v3s: fix incorrect postdivider on pll-audio Commit 46060be6d840 ("clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll") changed the audio pll on the Allwinner V3s and V3 SoCs to use sigma-delta modulation. In the process the declaration of fixed postdivider providing "pll-audio" was adjusted to provide the desired clock rates from the now sigma-delta modulated pll. However, while the divider used for calculations by the clock framework was adjusted the actual divider programmed into the hardware in sun8i_v3_v3s_ccu_init was left at "divide by four". This broke the "pll-audio" clock, now only providing quater the expected clock rate. It would in general be desirable to program the postdivider for "pll-audio" to four, such that a broader range of frequencies were available on the pll outputs. But the clock for the integrated codec "ac-dig" does not feature a mux that allows to select from all pll outputs as it is just a simple clock gate connected to "pll-audio". Thus we need to set the postdivider to one to be able to provide the 22.5792MHz and 24.576MHz rates required by the internal sun4i codec. This patches fixes the incorrect clock rate by forcing the postdivider to one in sun8i_v3_v3s_ccu_init. Fixes: 46060be6d840 ("clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll") Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210513131315.2059451-1-t.schramm@manjaro.org
2021-05-13 21:13:15 +08:00
writel(val, reg + SUN8I_V3S_PLL_AUDIO_REG);
clk: sunxi-ng: add support for V3s CCU V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 01:54:45 +08:00
clk: sunxi-ng: Convert early providers to platform drivers The PRCM CCU drivers depend on clocks provided by other CCU drivers. For example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by the SoC's main CCU. However, sun8i-r-ccu is an early OF clock provider, and many of the main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that the consumer clocks will be orphaned until the supplier driver is bound. This can be avoided by converting the remaining CCUs to use platform drivers. Then fw_devlink will ensure the drivers are bound in the optimal order. The sun5i CCU is the only one which actually needs to be an early clock provider, because it provides the clock for the system timer. That one is left alone. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-4-samuel@sholland.org
2021-11-19 11:33:36 +08:00
return devm_sunxi_ccu_probe(&pdev->dev, reg, desc);
clk: sunxi-ng: v3s: add Allwinner V3 support Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-28 11:12:24 +08:00
}
clk: sunxi-ng: Convert early providers to platform drivers The PRCM CCU drivers depend on clocks provided by other CCU drivers. For example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by the SoC's main CCU. However, sun8i-r-ccu is an early OF clock provider, and many of the main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that the consumer clocks will be orphaned until the supplier driver is bound. This can be avoided by converting the remaining CCUs to use platform drivers. Then fw_devlink will ensure the drivers are bound in the optimal order. The sun5i CCU is the only one which actually needs to be an early clock provider, because it provides the clock for the system timer. That one is left alone. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-4-samuel@sholland.org
2021-11-19 11:33:36 +08:00
static const struct of_device_id sun8i_v3s_ccu_ids[] = {
{
.compatible = "allwinner,sun8i-v3-ccu",
.data = &sun8i_v3_ccu_desc,
},
{
.compatible = "allwinner,sun8i-v3s-ccu",
.data = &sun8i_v3s_ccu_desc,
},
{ }
};
clk: sunxi-ng: v3s: add Allwinner V3 support Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-28 11:12:24 +08:00
clk: sunxi-ng: Convert early providers to platform drivers The PRCM CCU drivers depend on clocks provided by other CCU drivers. For example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by the SoC's main CCU. However, sun8i-r-ccu is an early OF clock provider, and many of the main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that the consumer clocks will be orphaned until the supplier driver is bound. This can be avoided by converting the remaining CCUs to use platform drivers. Then fw_devlink will ensure the drivers are bound in the optimal order. The sun5i CCU is the only one which actually needs to be an early clock provider, because it provides the clock for the system timer. That one is left alone. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-4-samuel@sholland.org
2021-11-19 11:33:36 +08:00
static struct platform_driver sun8i_v3s_ccu_driver = {
.probe = sun8i_v3s_ccu_probe,
.driver = {
.name = "sun8i-v3s-ccu",
.suppress_bind_attrs = true,
.of_match_table = sun8i_v3s_ccu_ids,
},
};
module_platform_driver(sun8i_v3s_ccu_driver);
clk: sunxi-ng: v3s: add Allwinner V3 support Allwinner V3 has the same main die with V3s, but with more pins wired. There's a I2S bus on V3 that is not available on V3s. Add the V3-only peripheral's clocks and reset to the V3s CCU driver, bound to a new V3 compatible string. The driver name is not changed because it's part of the device tree binding (the header file name). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-28 11:12:24 +08:00
clk: sunxi-ng: Convert early providers to platform drivers The PRCM CCU drivers depend on clocks provided by other CCU drivers. For example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by the SoC's main CCU. However, sun8i-r-ccu is an early OF clock provider, and many of the main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that the consumer clocks will be orphaned until the supplier driver is bound. This can be avoided by converting the remaining CCUs to use platform drivers. Then fw_devlink will ensure the drivers are bound in the optimal order. The sun5i CCU is the only one which actually needs to be an early clock provider, because it provides the clock for the system timer. That one is left alone. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-4-samuel@sholland.org
2021-11-19 11:33:36 +08:00
MODULE_IMPORT_NS(SUNXI_CCU);
MODULE_LICENSE("GPL");