UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/asm-sparc64/irq.h

93 lines
2.9 KiB
C
Raw Normal View History

[SPARC64]: __inline__ --> inline Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 15:13:04 +08:00
/* irq.h: IRQ registers on the 64-bit Sparc.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
[SPARC64]: __inline__ --> inline Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 15:13:04 +08:00
* Copyright (C) 1996 David S. Miller (davem@davemloft.net)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
*/
#ifndef _SPARC64_IRQ_H
#define _SPARC64_IRQ_H
#include <linux/linkage.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <asm/pil.h>
#include <asm/ptrace.h>
/* IMAP/ICLR register defines */
[SPARC64]: Fix type and constant sizes wrt. sun4u IMAP/ICLR handling. Sometimes we were using 32-bit values and the top bits were getting inadvertantly chopped off. This will matter for the forthcoming Fire controller MSI support. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 05:25:32 +08:00
#define IMAP_VALID 0x80000000UL /* IRQ Enabled */
#define IMAP_TID_UPA 0x7c000000UL /* UPA TargetID */
#define IMAP_TID_JBUS 0x7c000000UL /* JBUS TargetID */
[SPARC64]: Fix uniprocessor IRQ targetting on SUN4V. We need to use the real hardware processor ID when targetting interrupts, not the "define to 0" thing the uniprocessor build gives us. Also, fill in the Node-ID and Agent-ID fields properly on sun4u/Safari. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-18 00:38:06 +08:00
#define IMAP_TID_SHIFT 26
[SPARC64]: Fix type and constant sizes wrt. sun4u IMAP/ICLR handling. Sometimes we were using 32-bit values and the top bits were getting inadvertantly chopped off. This will matter for the forthcoming Fire controller MSI support. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 05:25:32 +08:00
#define IMAP_AID_SAFARI 0x7c000000UL /* Safari AgentID */
[SPARC64]: Fix uniprocessor IRQ targetting on SUN4V. We need to use the real hardware processor ID when targetting interrupts, not the "define to 0" thing the uniprocessor build gives us. Also, fill in the Node-ID and Agent-ID fields properly on sun4u/Safari. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-18 00:38:06 +08:00
#define IMAP_AID_SHIFT 26
[SPARC64]: Fix type and constant sizes wrt. sun4u IMAP/ICLR handling. Sometimes we were using 32-bit values and the top bits were getting inadvertantly chopped off. This will matter for the forthcoming Fire controller MSI support. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 05:25:32 +08:00
#define IMAP_NID_SAFARI 0x03e00000UL /* Safari NodeID */
[SPARC64]: Fix uniprocessor IRQ targetting on SUN4V. We need to use the real hardware processor ID when targetting interrupts, not the "define to 0" thing the uniprocessor build gives us. Also, fill in the Node-ID and Agent-ID fields properly on sun4u/Safari. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-18 00:38:06 +08:00
#define IMAP_NID_SHIFT 21
[SPARC64]: Fix type and constant sizes wrt. sun4u IMAP/ICLR handling. Sometimes we were using 32-bit values and the top bits were getting inadvertantly chopped off. This will matter for the forthcoming Fire controller MSI support. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 05:25:32 +08:00
#define IMAP_IGN 0x000007c0UL /* IRQ Group Number */
#define IMAP_INO 0x0000003fUL /* IRQ Number */
#define IMAP_INR 0x000007ffUL /* Full interrupt number*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[SPARC64]: Fix type and constant sizes wrt. sun4u IMAP/ICLR handling. Sometimes we were using 32-bit values and the top bits were getting inadvertantly chopped off. This will matter for the forthcoming Fire controller MSI support. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 05:25:32 +08:00
#define ICLR_IDLE 0x00000000UL /* Idle state */
#define ICLR_TRANSMIT 0x00000001UL /* Transmit state */
#define ICLR_PENDING 0x00000003UL /* Pending state */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[SPARC64]: Virtualize IRQ numbers. Inspired by PowerPC XICS interrupt support code. All IRQs are virtualized in order to keep NR_IRQS from needing to be too large. Interrupts on sparc64 are arbitrary 11-bit values, but we don't need to define NR_IRQS to 2048 if we virtualize the IRQs. As PCI and SBUS controller drivers build device IRQs, we divy out virtual IRQ numbers incrementally starting at 1. Zero is a special virtual IRQ used for the timer interrupt. So device drivers all see virtual IRQs, and all the normal interfaces such as request_irq(), enable_irq(), etc. translate that into a real IRQ number in order to configure the IRQ. At this point knowledge of the struct ino_bucket is almost entirely contained within arch/sparc64/kernel/irq.c There are a few small bits in the PCI controller drivers that need to be swept away before we can remove ino_bucket's definition out of asm-sparc64/irq.h and privately into kernel/irq.c Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 16:22:35 +08:00
/* The largest number of unique interrupt sources we support.
* If this needs to ever be larger than 255, you need to change
* the type of ino_bucket->virt_irq as appropriate.
*
* ino_bucket->virt_irq allocation is made during {sun4v_,}build_irq().
*/
#define NR_IRQS 255
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[SPARC64]: Virtualize IRQ numbers. Inspired by PowerPC XICS interrupt support code. All IRQs are virtualized in order to keep NR_IRQS from needing to be too large. Interrupts on sparc64 are arbitrary 11-bit values, but we don't need to define NR_IRQS to 2048 if we virtualize the IRQs. As PCI and SBUS controller drivers build device IRQs, we divy out virtual IRQ numbers incrementally starting at 1. Zero is a special virtual IRQ used for the timer interrupt. So device drivers all see virtual IRQs, and all the normal interfaces such as request_irq(), enable_irq(), etc. translate that into a real IRQ number in order to configure the IRQ. At this point knowledge of the struct ino_bucket is almost entirely contained within arch/sparc64/kernel/irq.c There are a few small bits in the PCI controller drivers that need to be swept away before we can remove ino_bucket's definition out of asm-sparc64/irq.h and privately into kernel/irq.c Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 16:22:35 +08:00
extern void irq_install_pre_handler(int virt_irq,
[SPARC64]: Move over to GENERIC_HARDIRQS. This is the long overdue conversion of sparc64 over to the generic IRQ layer. The kernel image is slightly larger, but the BSS is ~60K smaller due to the reduced size of struct ino_bucket. A lot of IRQ implementation details, including ino_bucket, were moved out of asm-sparc64/irq.h and are now private to arch/sparc64/kernel/irq.c, and most of the code in irq.c totally disappeared. One thing that's different at the moment is IRQ distribution, we do it at enable_irq() time. If the cpu mask is ALL then we round-robin using a global rotating cpu counter, else we pick the first cpu in the mask to support single cpu targetting. This is similar to what powerpc's XICS IRQ support code does. This works fine on my UP SB1000, and the SMP build goes fine and runs on that machine, but lots of testing on different setups is needed. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 16:23:32 +08:00
void (*func)(unsigned int, void *, void *),
[SPARC64]: Virtualize IRQ numbers. Inspired by PowerPC XICS interrupt support code. All IRQs are virtualized in order to keep NR_IRQS from needing to be too large. Interrupts on sparc64 are arbitrary 11-bit values, but we don't need to define NR_IRQS to 2048 if we virtualize the IRQs. As PCI and SBUS controller drivers build device IRQs, we divy out virtual IRQ numbers incrementally starting at 1. Zero is a special virtual IRQ used for the timer interrupt. So device drivers all see virtual IRQs, and all the normal interfaces such as request_irq(), enable_irq(), etc. translate that into a real IRQ number in order to configure the IRQ. At this point knowledge of the struct ino_bucket is almost entirely contained within arch/sparc64/kernel/irq.c There are a few small bits in the PCI controller drivers that need to be swept away before we can remove ino_bucket's definition out of asm-sparc64/irq.h and privately into kernel/irq.c Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 16:22:35 +08:00
void *arg1, void *arg2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define irq_canonicalize(irq) (irq)
[SPARC64]: Move over to GENERIC_HARDIRQS. This is the long overdue conversion of sparc64 over to the generic IRQ layer. The kernel image is slightly larger, but the BSS is ~60K smaller due to the reduced size of struct ino_bucket. A lot of IRQ implementation details, including ino_bucket, were moved out of asm-sparc64/irq.h and are now private to arch/sparc64/kernel/irq.c, and most of the code in irq.c totally disappeared. One thing that's different at the moment is IRQ distribution, we do it at enable_irq() time. If the cpu mask is ALL then we round-robin using a global rotating cpu counter, else we pick the first cpu in the mask to support single cpu targetting. This is similar to what powerpc's XICS IRQ support code does. This works fine on my UP SB1000, and the SMP build goes fine and runs on that machine, but lots of testing on different setups is needed. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 16:23:32 +08:00
extern unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap);
extern unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino);
[SPARC64]: Wire up cookie based sun4v interrupt registry. This will be used for logical domain channel interrupts. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-13 15:01:04 +08:00
extern unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino);
[SPARC64]: Add PCI MSI support on Niagara. This is kind of hokey, we could use the hardware provided facilities much better. MSIs are assosciated with MSI Queues. MSI Queues generate interrupts when any MSI assosciated with it is signalled. This suggests a two-tiered IRQ dispatch scheme: MSI Queue interrupt --> queue interrupt handler MSI dispatch --> driver interrupt handler But we just get one-level under Linux currently. What I'd like to do is possibly stick the IRQ actions into a per-MSI-Queue data structure, and dispatch them form there, but the generic IRQ layer doesn't provide a way to do that right now. So, the current kludge is to "ACK" the interrupt by processing the MSI Queue data structures and ACK'ing them, then we run the actual handler like normal. We are wasting a lot of useful information, for example the MSI data and address are provided with ever MSI, as well as a system tick if available. If we could pass this into the IRQ handler it could help with certain things, in particular for PCI-Express error messages. The MSI entries on sparc64 also tell you exactly which bus/device/fn sent the MSI, which would be great for error handling when no registered IRQ handler can service the interrupt. We override the disable/enable IRQ chip methods in sun4v_msi, so we have to call {mask,unmask}_msi_irq() directly from there. This is another ugly wart. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-11 09:41:02 +08:00
extern unsigned int sun4v_build_msi(u32 devhandle, unsigned int *virt_irq_p,
unsigned int msi_devino_start,
unsigned int msi_devino_end);
extern void sun4v_destroy_msi(unsigned int virt_irq);
[SPARC64]: Enable MSI on sun4u Fire PCI-E controllers. The support code is identical to the hypervisor sun4v stuff, just replacing the hypervisor calls with register reads and writes in the Fire controller. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-31 13:33:25 +08:00
extern unsigned int sun4u_build_msi(u32 portid, unsigned int *virt_irq_p,
unsigned int msi_devino_start,
unsigned int msi_devino_end,
unsigned long imap_base,
unsigned long iclr_base);
extern void sun4u_destroy_msi(unsigned int virt_irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern unsigned int sbus_build_irq(void *sbus, unsigned int ino);
[SPARC64]: virt_irq --> bucket mapping no longer necessary We used to need this to compute virt_irq --> ino, but that is no longer necessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-14 14:50:38 +08:00
extern unsigned char virt_irq_alloc(unsigned int dev_handle,
[SPARC64]: Kill ugly __irq_ino() macro. We have a place to stick INO information in the virt_to_real_irq_table[], which is currently only used for VIRQs. And that is readily accessible from the one __irq_ino() call site. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-14 14:27:48 +08:00
unsigned int dev_ino);
[SPARC64]: Consolidate MSI support code. This also makes us use the MSI queues correctly. Each MSI queue is serviced by a normal sun4u/sun4v INO interrupt handler. This handler runs the MSI queue and dispatches the virtual interrupts indicated by arriving MSIs in that MSI queue. All of the common logic is placed in pci_msi.c, with callbacks to handle the PCI controller specific aspects of the operations. This common infrastructure will make it much easier to add MSG support. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11 18:16:13 +08:00
#ifdef CONFIG_PCI_MSI
extern void virt_irq_free(unsigned int virt_irq);
#endif
[SPARC64]: Fix several bugs in MSI handling. 1) sun4{u,v}_build_msi() have improper return value handling. We should always return negative error codes, instead of using the magic value "0" which could in fact be a valid MSI number. 2) sun4{u,v}_build_msi() should return -ENOMEM instead of calling prom_prom() halt with kzalloc() of the interrupt data fails. 3) We 'remembered' the MSI number using a singleton in the struct device archdata area, this doesn't work for MSI-X which can cause multiple MSIs assosciated with one device. Delete that archdata member, and instead store the MSI number in the IRQ chip data area. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-31 13:27:28 +08:00
[SPARC64]: dr-cpu unconfigure support. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 18:49:40 +08:00
extern void fixup_irqs(void);
[SPARC64]: __inline__ --> inline Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 15:13:04 +08:00
static inline void set_softint(unsigned long bits)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
__asm__ __volatile__("wr %0, 0x0, %%set_softint"
: /* No outputs */
: "r" (bits));
}
[SPARC64]: __inline__ --> inline Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 15:13:04 +08:00
static inline void clear_softint(unsigned long bits)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
__asm__ __volatile__("wr %0, 0x0, %%clear_softint"
: /* No outputs */
: "r" (bits));
}
[SPARC64]: __inline__ --> inline Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 15:13:04 +08:00
static inline unsigned long get_softint(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned long retval;
__asm__ __volatile__("rd %%softint, %0"
: "=r" (retval));
return retval;
}
#endif