OpenCloudOS-Kernel/fs/overlayfs/file.c

685 lines
16 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2017 Red Hat, Inc.
*/
#include <linux/cred.h>
#include <linux/file.h>
#include <linux/mount.h>
#include <linux/xattr.h>
#include <linux/uio.h>
#include <linux/uaccess.h>
#include <linux/splice.h>
#include <linux/security.h>
#include <linux/mm.h>
#include <linux/fs.h>
#include "overlayfs.h"
struct ovl_aio_req {
struct kiocb iocb;
struct kiocb *orig_iocb;
struct fd fd;
};
static struct kmem_cache *ovl_aio_request_cachep;
static char ovl_whatisit(struct inode *inode, struct inode *realinode)
{
if (realinode != ovl_inode_upper(inode))
return 'l';
if (ovl_has_upperdata(inode))
return 'u';
else
return 'm';
}
/* No atime modificaton nor notify on underlying */
#define OVL_OPEN_FLAGS (O_NOATIME | FMODE_NONOTIFY)
static struct file *ovl_open_realfile(const struct file *file,
struct inode *realinode)
{
struct inode *inode = file_inode(file);
struct file *realfile;
const struct cred *old_cred;
int flags = file->f_flags | OVL_OPEN_FLAGS;
int acc_mode = ACC_MODE(flags);
int err;
if (flags & O_APPEND)
acc_mode |= MAY_APPEND;
old_cred = ovl_override_creds(inode->i_sb);
err = inode_permission(&init_user_ns, realinode, MAY_OPEN | acc_mode);
if (err) {
realfile = ERR_PTR(err);
} else {
if (!inode_owner_or_capable(&init_user_ns, realinode))
flags &= ~O_NOATIME;
realfile = open_with_fake_path(&file->f_path, flags, realinode,
current_cred());
}
revert_creds(old_cred);
pr_debug("open(%p[%pD2/%c], 0%o) -> (%p, 0%o)\n",
file, file, ovl_whatisit(inode, realinode), file->f_flags,
realfile, IS_ERR(realfile) ? 0 : realfile->f_flags);
return realfile;
}
#define OVL_SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT)
static int ovl_change_flags(struct file *file, unsigned int flags)
{
struct inode *inode = file_inode(file);
int err;
flags &= OVL_SETFL_MASK;
if (((flags ^ file->f_flags) & O_APPEND) && IS_APPEND(inode))
return -EPERM;
if (flags & O_DIRECT) {
if (!file->f_mapping->a_ops ||
!file->f_mapping->a_ops->direct_IO)
return -EINVAL;
}
if (file->f_op->check_flags) {
err = file->f_op->check_flags(flags);
if (err)
return err;
}
spin_lock(&file->f_lock);
file->f_flags = (file->f_flags & ~OVL_SETFL_MASK) | flags;
spin_unlock(&file->f_lock);
return 0;
}
static int ovl_real_fdget_meta(const struct file *file, struct fd *real,
bool allow_meta)
{
struct inode *inode = file_inode(file);
struct inode *realinode;
real->flags = 0;
real->file = file->private_data;
if (allow_meta)
realinode = ovl_inode_real(inode);
else
realinode = ovl_inode_realdata(inode);
/* Has it been copied up since we'd opened it? */
if (unlikely(file_inode(real->file) != realinode)) {
real->flags = FDPUT_FPUT;
real->file = ovl_open_realfile(file, realinode);
return PTR_ERR_OR_ZERO(real->file);
}
/* Did the flags change since open? */
if (unlikely((file->f_flags ^ real->file->f_flags) & ~OVL_OPEN_FLAGS))
return ovl_change_flags(real->file, file->f_flags);
return 0;
}
static int ovl_real_fdget(const struct file *file, struct fd *real)
{
if (d_is_dir(file_dentry(file))) {
real->flags = 0;
real->file = ovl_dir_real_file(file, false);
return PTR_ERR_OR_ZERO(real->file);
}
return ovl_real_fdget_meta(file, real, false);
}
static int ovl_open(struct inode *inode, struct file *file)
{
struct file *realfile;
int err;
err = ovl_maybe_copy_up(file_dentry(file), file->f_flags);
if (err)
return err;
/* No longer need these flags, so don't pass them on to underlying fs */
file->f_flags &= ~(O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC);
realfile = ovl_open_realfile(file, ovl_inode_realdata(inode));
if (IS_ERR(realfile))
return PTR_ERR(realfile);
file->private_data = realfile;
return 0;
}
static int ovl_release(struct inode *inode, struct file *file)
{
fput(file->private_data);
return 0;
}
static loff_t ovl_llseek(struct file *file, loff_t offset, int whence)
{
struct inode *inode = file_inode(file);
struct fd real;
const struct cred *old_cred;
loff_t ret;
/*
* The two special cases below do not need to involve real fs,
* so we can optimizing concurrent callers.
*/
if (offset == 0) {
if (whence == SEEK_CUR)
return file->f_pos;
if (whence == SEEK_SET)
return vfs_setpos(file, 0, 0);
}
ret = ovl_real_fdget(file, &real);
if (ret)
return ret;
/*
* Overlay file f_pos is the master copy that is preserved
* through copy up and modified on read/write, but only real
* fs knows how to SEEK_HOLE/SEEK_DATA and real fs may impose
* limitations that are more strict than ->s_maxbytes for specific
* files, so we use the real file to perform seeks.
*/
ovl_inode_lock(inode);
real.file->f_pos = file->f_pos;
old_cred = ovl_override_creds(inode->i_sb);
ret = vfs_llseek(real.file, offset, whence);
revert_creds(old_cred);
file->f_pos = real.file->f_pos;
ovl_inode_unlock(inode);
fdput(real);
return ret;
}
static void ovl_file_accessed(struct file *file)
{
struct inode *inode, *upperinode;
if (file->f_flags & O_NOATIME)
return;
inode = file_inode(file);
upperinode = ovl_inode_upper(inode);
if (!upperinode)
return;
if ((!timespec64_equal(&inode->i_mtime, &upperinode->i_mtime) ||
!timespec64_equal(&inode->i_ctime, &upperinode->i_ctime))) {
inode->i_mtime = upperinode->i_mtime;
inode->i_ctime = upperinode->i_ctime;
}
touch_atime(&file->f_path);
}
static rwf_t ovl_iocb_to_rwf(int ifl)
{
rwf_t flags = 0;
if (ifl & IOCB_NOWAIT)
flags |= RWF_NOWAIT;
if (ifl & IOCB_HIPRI)
flags |= RWF_HIPRI;
if (ifl & IOCB_DSYNC)
flags |= RWF_DSYNC;
if (ifl & IOCB_SYNC)
flags |= RWF_SYNC;
return flags;
}
static void ovl_aio_cleanup_handler(struct ovl_aio_req *aio_req)
{
struct kiocb *iocb = &aio_req->iocb;
struct kiocb *orig_iocb = aio_req->orig_iocb;
if (iocb->ki_flags & IOCB_WRITE) {
struct inode *inode = file_inode(orig_iocb->ki_filp);
/* Actually acquired in ovl_write_iter() */
__sb_writers_acquired(file_inode(iocb->ki_filp)->i_sb,
SB_FREEZE_WRITE);
file_end_write(iocb->ki_filp);
ovl_copyattr(ovl_inode_real(inode), inode);
}
orig_iocb->ki_pos = iocb->ki_pos;
fdput(aio_req->fd);
kmem_cache_free(ovl_aio_request_cachep, aio_req);
}
static void ovl_aio_rw_complete(struct kiocb *iocb, long res, long res2)
{
struct ovl_aio_req *aio_req = container_of(iocb,
struct ovl_aio_req, iocb);
struct kiocb *orig_iocb = aio_req->orig_iocb;
ovl_aio_cleanup_handler(aio_req);
orig_iocb->ki_complete(orig_iocb, res, res2);
}
static ssize_t ovl_read_iter(struct kiocb *iocb, struct iov_iter *iter)
{
struct file *file = iocb->ki_filp;
struct fd real;
const struct cred *old_cred;
ssize_t ret;
if (!iov_iter_count(iter))
return 0;
ret = ovl_real_fdget(file, &real);
if (ret)
return ret;
ret = -EINVAL;
if (iocb->ki_flags & IOCB_DIRECT &&
(!real.file->f_mapping->a_ops ||
!real.file->f_mapping->a_ops->direct_IO))
goto out_fdput;
old_cred = ovl_override_creds(file_inode(file)->i_sb);
if (is_sync_kiocb(iocb)) {
ret = vfs_iter_read(real.file, iter, &iocb->ki_pos,
ovl_iocb_to_rwf(iocb->ki_flags));
} else {
struct ovl_aio_req *aio_req;
ret = -ENOMEM;
aio_req = kmem_cache_zalloc(ovl_aio_request_cachep, GFP_KERNEL);
if (!aio_req)
goto out;
aio_req->fd = real;
real.flags = 0;
aio_req->orig_iocb = iocb;
kiocb_clone(&aio_req->iocb, iocb, real.file);
aio_req->iocb.ki_complete = ovl_aio_rw_complete;
ret = vfs_iocb_iter_read(real.file, &aio_req->iocb, iter);
if (ret != -EIOCBQUEUED)
ovl_aio_cleanup_handler(aio_req);
}
out:
revert_creds(old_cred);
ovl_file_accessed(file);
out_fdput:
fdput(real);
return ret;
}
static ssize_t ovl_write_iter(struct kiocb *iocb, struct iov_iter *iter)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
struct fd real;
const struct cred *old_cred;
ssize_t ret;
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-01 02:15:29 +08:00
int ifl = iocb->ki_flags;
if (!iov_iter_count(iter))
return 0;
inode_lock(inode);
/* Update mode */
ovl_copyattr(ovl_inode_real(inode), inode);
ret = file_remove_privs(file);
if (ret)
goto out_unlock;
ret = ovl_real_fdget(file, &real);
if (ret)
goto out_unlock;
ret = -EINVAL;
if (iocb->ki_flags & IOCB_DIRECT &&
(!real.file->f_mapping->a_ops ||
!real.file->f_mapping->a_ops->direct_IO))
goto out_fdput;
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-01 02:15:29 +08:00
if (!ovl_should_sync(OVL_FS(inode->i_sb)))
ifl &= ~(IOCB_DSYNC | IOCB_SYNC);
old_cred = ovl_override_creds(file_inode(file)->i_sb);
if (is_sync_kiocb(iocb)) {
file_start_write(real.file);
ret = vfs_iter_write(real.file, iter, &iocb->ki_pos,
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-01 02:15:29 +08:00
ovl_iocb_to_rwf(ifl));
file_end_write(real.file);
/* Update size */
ovl_copyattr(ovl_inode_real(inode), inode);
} else {
struct ovl_aio_req *aio_req;
ret = -ENOMEM;
aio_req = kmem_cache_zalloc(ovl_aio_request_cachep, GFP_KERNEL);
if (!aio_req)
goto out;
file_start_write(real.file);
/* Pacify lockdep, same trick as done in aio_write() */
__sb_writers_release(file_inode(real.file)->i_sb,
SB_FREEZE_WRITE);
aio_req->fd = real;
real.flags = 0;
aio_req->orig_iocb = iocb;
kiocb_clone(&aio_req->iocb, iocb, real.file);
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-01 02:15:29 +08:00
aio_req->iocb.ki_flags = ifl;
aio_req->iocb.ki_complete = ovl_aio_rw_complete;
ret = vfs_iocb_iter_write(real.file, &aio_req->iocb, iter);
if (ret != -EIOCBQUEUED)
ovl_aio_cleanup_handler(aio_req);
}
out:
revert_creds(old_cred);
out_fdput:
fdput(real);
out_unlock:
inode_unlock(inode);
return ret;
}
/*
* Calling iter_file_splice_write() directly from overlay's f_op may deadlock
* due to lock order inversion between pipe->mutex in iter_file_splice_write()
* and file_start_write(real.file) in ovl_write_iter().
*
* So do everything ovl_write_iter() does and call iter_file_splice_write() on
* the real file.
*/
static ssize_t ovl_splice_write(struct pipe_inode_info *pipe, struct file *out,
loff_t *ppos, size_t len, unsigned int flags)
{
struct fd real;
const struct cred *old_cred;
struct inode *inode = file_inode(out);
struct inode *realinode = ovl_inode_real(inode);
ssize_t ret;
inode_lock(inode);
/* Update mode */
ovl_copyattr(realinode, inode);
ret = file_remove_privs(out);
if (ret)
goto out_unlock;
ret = ovl_real_fdget(out, &real);
if (ret)
goto out_unlock;
old_cred = ovl_override_creds(inode->i_sb);
file_start_write(real.file);
ret = iter_file_splice_write(pipe, real.file, ppos, len, flags);
file_end_write(real.file);
/* Update size */
ovl_copyattr(realinode, inode);
revert_creds(old_cred);
fdput(real);
out_unlock:
inode_unlock(inode);
return ret;
}
static int ovl_fsync(struct file *file, loff_t start, loff_t end, int datasync)
{
struct fd real;
const struct cred *old_cred;
int ret;
ovl: implement volatile-specific fsync error behaviour Overlayfs's volatile option allows the user to bypass all forced sync calls to the upperdir filesystem. This comes at the cost of safety. We can never ensure that the user's data is intact, but we can make a best effort to expose whether or not the data is likely to be in a bad state. The best way to handle this in the time being is that if an overlayfs's upperdir experiences an error after a volatile mount occurs, that error will be returned on fsync, fdatasync, sync, and syncfs. This is contradictory to the traditional behaviour of VFS which fails the call once, and only raises an error if a subsequent fsync error has occurred, and been raised by the filesystem. One awkward aspect of the patch is that we have to manually set the superblock's errseq_t after the sync_fs callback as opposed to just returning an error from syncfs. This is because the call chain looks something like this: sys_syncfs -> sync_filesystem -> __sync_filesystem -> /* The return value is ignored here sb->s_op->sync_fs(sb) _sync_blockdev /* Where the VFS fetches the error to raise to userspace */ errseq_check_and_advance Because of this we call errseq_set every time the sync_fs callback occurs. Due to the nature of this seen / unseen dichotomy, if the upperdir is an inconsistent state at the initial mount time, overlayfs will refuse to mount, as overlayfs cannot get a snapshot of the upperdir's errseq that will increment on error until the user calls syncfs. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Fixes: c86243b090bc ("ovl: provide a mount option "volatile"") Cc: stable@vger.kernel.org Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-01-08 08:10:43 +08:00
ret = ovl_sync_status(OVL_FS(file_inode(file)->i_sb));
if (ret <= 0)
return ret;
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-01 02:15:29 +08:00
ret = ovl_real_fdget_meta(file, &real, !datasync);
if (ret)
return ret;
/* Don't sync lower file for fear of receiving EROFS error */
if (file_inode(real.file) == ovl_inode_upper(file_inode(file))) {
old_cred = ovl_override_creds(file_inode(file)->i_sb);
ret = vfs_fsync_range(real.file, start, end, datasync);
revert_creds(old_cred);
}
fdput(real);
return ret;
}
static int ovl_mmap(struct file *file, struct vm_area_struct *vma)
{
struct file *realfile = file->private_data;
const struct cred *old_cred;
int ret;
if (!realfile->f_op->mmap)
return -ENODEV;
if (WARN_ON(file != vma->vm_file))
return -EIO;
vma_set_file(vma, realfile);
old_cred = ovl_override_creds(file_inode(file)->i_sb);
ret = call_mmap(vma->vm_file, vma);
revert_creds(old_cred);
ovl_file_accessed(file);
return ret;
}
static long ovl_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
{
struct inode *inode = file_inode(file);
struct fd real;
const struct cred *old_cred;
int ret;
ret = ovl_real_fdget(file, &real);
if (ret)
return ret;
old_cred = ovl_override_creds(file_inode(file)->i_sb);
ret = vfs_fallocate(real.file, mode, offset, len);
revert_creds(old_cred);
/* Update size */
ovl_copyattr(ovl_inode_real(inode), inode);
fdput(real);
return ret;
}
static int ovl_fadvise(struct file *file, loff_t offset, loff_t len, int advice)
{
struct fd real;
const struct cred *old_cred;
int ret;
ret = ovl_real_fdget(file, &real);
if (ret)
return ret;
old_cred = ovl_override_creds(file_inode(file)->i_sb);
ret = vfs_fadvise(real.file, offset, len, advice);
revert_creds(old_cred);
fdput(real);
return ret;
}
enum ovl_copyop {
OVL_COPY,
OVL_CLONE,
OVL_DEDUPE,
};
static loff_t ovl_copyfile(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
loff_t len, unsigned int flags, enum ovl_copyop op)
{
struct inode *inode_out = file_inode(file_out);
struct fd real_in, real_out;
const struct cred *old_cred;
loff_t ret;
ret = ovl_real_fdget(file_out, &real_out);
if (ret)
return ret;
ret = ovl_real_fdget(file_in, &real_in);
if (ret) {
fdput(real_out);
return ret;
}
old_cred = ovl_override_creds(file_inode(file_out)->i_sb);
switch (op) {
case OVL_COPY:
ret = vfs_copy_file_range(real_in.file, pos_in,
real_out.file, pos_out, len, flags);
break;
case OVL_CLONE:
ret = vfs_clone_file_range(real_in.file, pos_in,
real_out.file, pos_out, len, flags);
break;
case OVL_DEDUPE:
ret = vfs_dedupe_file_range_one(real_in.file, pos_in,
real_out.file, pos_out, len,
flags);
break;
}
revert_creds(old_cred);
/* Update size */
ovl_copyattr(ovl_inode_real(inode_out), inode_out);
fdput(real_in);
fdput(real_out);
return ret;
}
static ssize_t ovl_copy_file_range(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
size_t len, unsigned int flags)
{
return ovl_copyfile(file_in, pos_in, file_out, pos_out, len, flags,
OVL_COPY);
}
static loff_t ovl_remap_file_range(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
loff_t len, unsigned int remap_flags)
{
enum ovl_copyop op;
if (remap_flags & ~(REMAP_FILE_DEDUP | REMAP_FILE_ADVISORY))
return -EINVAL;
if (remap_flags & REMAP_FILE_DEDUP)
op = OVL_DEDUPE;
else
op = OVL_CLONE;
/*
* Don't copy up because of a dedupe request, this wouldn't make sense
* most of the time (data would be duplicated instead of deduplicated).
*/
if (op == OVL_DEDUPE &&
(!ovl_inode_upper(file_inode(file_in)) ||
!ovl_inode_upper(file_inode(file_out))))
return -EPERM;
return ovl_copyfile(file_in, pos_in, file_out, pos_out, len,
remap_flags, op);
}
static int ovl_flush(struct file *file, fl_owner_t id)
{
struct fd real;
const struct cred *old_cred;
int err;
err = ovl_real_fdget(file, &real);
if (err)
return err;
if (real.file->f_op->flush) {
old_cred = ovl_override_creds(file_inode(file)->i_sb);
err = real.file->f_op->flush(real.file, id);
revert_creds(old_cred);
}
fdput(real);
return err;
}
const struct file_operations ovl_file_operations = {
.open = ovl_open,
.release = ovl_release,
.llseek = ovl_llseek,
.read_iter = ovl_read_iter,
.write_iter = ovl_write_iter,
.fsync = ovl_fsync,
.mmap = ovl_mmap,
.fallocate = ovl_fallocate,
.fadvise = ovl_fadvise,
.flush = ovl_flush,
.splice_read = generic_file_splice_read,
.splice_write = ovl_splice_write,
.copy_file_range = ovl_copy_file_range,
.remap_file_range = ovl_remap_file_range,
};
int __init ovl_aio_request_cache_init(void)
{
ovl_aio_request_cachep = kmem_cache_create("ovl_aio_req",
sizeof(struct ovl_aio_req),
0, SLAB_HWCACHE_ALIGN, NULL);
if (!ovl_aio_request_cachep)
return -ENOMEM;
return 0;
}
void ovl_aio_request_cache_destroy(void)
{
kmem_cache_destroy(ovl_aio_request_cachep);
}