Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2008 Red Hat. All rights reserved.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public
|
|
|
|
* License v2 as published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public
|
|
|
|
* License along with this program; if not, write to the
|
|
|
|
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
|
|
|
|
* Boston, MA 021110-1307, USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include "ctree.h"
|
2009-04-03 21:47:43 +08:00
|
|
|
#include "free-space-cache.h"
|
|
|
|
#include "transaction.h"
|
|
|
|
|
|
|
|
struct btrfs_free_space {
|
|
|
|
struct rb_node bytes_index;
|
|
|
|
struct rb_node offset_index;
|
|
|
|
u64 offset;
|
|
|
|
u64 bytes;
|
|
|
|
};
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
|
|
|
|
static int tree_insert_offset(struct rb_root *root, u64 offset,
|
|
|
|
struct rb_node *node)
|
|
|
|
{
|
|
|
|
struct rb_node **p = &root->rb_node;
|
|
|
|
struct rb_node *parent = NULL;
|
|
|
|
struct btrfs_free_space *info;
|
|
|
|
|
|
|
|
while (*p) {
|
|
|
|
parent = *p;
|
|
|
|
info = rb_entry(parent, struct btrfs_free_space, offset_index);
|
|
|
|
|
|
|
|
if (offset < info->offset)
|
|
|
|
p = &(*p)->rb_left;
|
|
|
|
else if (offset > info->offset)
|
|
|
|
p = &(*p)->rb_right;
|
|
|
|
else
|
|
|
|
return -EEXIST;
|
|
|
|
}
|
|
|
|
|
|
|
|
rb_link_node(node, parent, p);
|
|
|
|
rb_insert_color(node, root);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tree_insert_bytes(struct rb_root *root, u64 bytes,
|
|
|
|
struct rb_node *node)
|
|
|
|
{
|
|
|
|
struct rb_node **p = &root->rb_node;
|
|
|
|
struct rb_node *parent = NULL;
|
|
|
|
struct btrfs_free_space *info;
|
|
|
|
|
|
|
|
while (*p) {
|
|
|
|
parent = *p;
|
|
|
|
info = rb_entry(parent, struct btrfs_free_space, bytes_index);
|
|
|
|
|
|
|
|
if (bytes < info->bytes)
|
|
|
|
p = &(*p)->rb_left;
|
|
|
|
else
|
|
|
|
p = &(*p)->rb_right;
|
|
|
|
}
|
|
|
|
|
|
|
|
rb_link_node(node, parent, p);
|
|
|
|
rb_insert_color(node, root);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2009-04-03 22:14:19 +08:00
|
|
|
* searches the tree for the given offset.
|
|
|
|
*
|
|
|
|
* fuzzy == 1: this is used for allocations where we are given a hint of where
|
|
|
|
* to look for free space. Because the hint may not be completely on an offset
|
|
|
|
* mark, or the hint may no longer point to free space we need to fudge our
|
|
|
|
* results a bit. So we look for free space starting at or after offset with at
|
|
|
|
* least bytes size. We prefer to find as close to the given offset as we can.
|
|
|
|
* Also if the offset is within a free space range, then we will return the free
|
|
|
|
* space that contains the given offset, which means we can return a free space
|
|
|
|
* chunk with an offset before the provided offset.
|
|
|
|
*
|
|
|
|
* fuzzy == 0: this is just a normal tree search. Give us the free space that
|
|
|
|
* starts at the given offset which is at least bytes size, and if its not there
|
|
|
|
* return NULL.
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
*/
|
|
|
|
static struct btrfs_free_space *tree_search_offset(struct rb_root *root,
|
|
|
|
u64 offset, u64 bytes,
|
2009-04-03 22:14:19 +08:00
|
|
|
int fuzzy)
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
{
|
|
|
|
struct rb_node *n = root->rb_node;
|
|
|
|
struct btrfs_free_space *entry, *ret = NULL;
|
|
|
|
|
|
|
|
while (n) {
|
|
|
|
entry = rb_entry(n, struct btrfs_free_space, offset_index);
|
|
|
|
|
|
|
|
if (offset < entry->offset) {
|
2009-04-03 22:14:19 +08:00
|
|
|
if (fuzzy &&
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
(!ret || entry->offset < ret->offset) &&
|
|
|
|
(bytes <= entry->bytes))
|
|
|
|
ret = entry;
|
|
|
|
n = n->rb_left;
|
|
|
|
} else if (offset > entry->offset) {
|
2009-04-03 22:14:19 +08:00
|
|
|
if (fuzzy &&
|
|
|
|
(entry->offset + entry->bytes - 1) >= offset &&
|
2008-10-10 22:24:32 +08:00
|
|
|
bytes <= entry->bytes) {
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
ret = entry;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
n = n->rb_right;
|
|
|
|
} else {
|
|
|
|
if (bytes > entry->bytes) {
|
|
|
|
n = n->rb_right;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
ret = entry;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* return a chunk at least bytes size, as close to offset that we can get.
|
|
|
|
*/
|
|
|
|
static struct btrfs_free_space *tree_search_bytes(struct rb_root *root,
|
|
|
|
u64 offset, u64 bytes)
|
|
|
|
{
|
|
|
|
struct rb_node *n = root->rb_node;
|
|
|
|
struct btrfs_free_space *entry, *ret = NULL;
|
|
|
|
|
|
|
|
while (n) {
|
|
|
|
entry = rb_entry(n, struct btrfs_free_space, bytes_index);
|
|
|
|
|
|
|
|
if (bytes < entry->bytes) {
|
|
|
|
/*
|
|
|
|
* We prefer to get a hole size as close to the size we
|
|
|
|
* are asking for so we don't take small slivers out of
|
|
|
|
* huge holes, but we also want to get as close to the
|
|
|
|
* offset as possible so we don't have a whole lot of
|
|
|
|
* fragmentation.
|
|
|
|
*/
|
|
|
|
if (offset <= entry->offset) {
|
|
|
|
if (!ret)
|
|
|
|
ret = entry;
|
|
|
|
else if (entry->bytes < ret->bytes)
|
|
|
|
ret = entry;
|
|
|
|
else if (entry->offset < ret->offset)
|
|
|
|
ret = entry;
|
|
|
|
}
|
|
|
|
n = n->rb_left;
|
|
|
|
} else if (bytes > entry->bytes) {
|
|
|
|
n = n->rb_right;
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* Ok we may have multiple chunks of the wanted size,
|
|
|
|
* so we don't want to take the first one we find, we
|
|
|
|
* want to take the one closest to our given offset, so
|
|
|
|
* keep searching just in case theres a better match.
|
|
|
|
*/
|
|
|
|
n = n->rb_right;
|
|
|
|
if (offset > entry->offset)
|
|
|
|
continue;
|
|
|
|
else if (!ret || entry->offset < ret->offset)
|
|
|
|
ret = entry;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void unlink_free_space(struct btrfs_block_group_cache *block_group,
|
|
|
|
struct btrfs_free_space *info)
|
|
|
|
{
|
|
|
|
rb_erase(&info->offset_index, &block_group->free_space_offset);
|
|
|
|
rb_erase(&info->bytes_index, &block_group->free_space_bytes);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int link_free_space(struct btrfs_block_group_cache *block_group,
|
|
|
|
struct btrfs_free_space *info)
|
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
|
2009-04-03 22:14:18 +08:00
|
|
|
BUG_ON(!info->bytes);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
ret = tree_insert_offset(&block_group->free_space_offset, info->offset,
|
|
|
|
&info->offset_index);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = tree_insert_bytes(&block_group->free_space_bytes, info->bytes,
|
|
|
|
&info->bytes_index);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2009-04-03 22:14:18 +08:00
|
|
|
int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
|
|
|
|
u64 offset, u64 bytes)
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
{
|
|
|
|
struct btrfs_free_space *right_info;
|
|
|
|
struct btrfs_free_space *left_info;
|
|
|
|
struct btrfs_free_space *info = NULL;
|
|
|
|
int ret = 0;
|
|
|
|
|
2009-04-03 22:14:18 +08:00
|
|
|
info = kzalloc(sizeof(struct btrfs_free_space), GFP_NOFS);
|
|
|
|
if (!info)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
info->offset = offset;
|
|
|
|
info->bytes = bytes;
|
|
|
|
|
|
|
|
spin_lock(&block_group->tree_lock);
|
|
|
|
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
/*
|
|
|
|
* first we want to see if there is free space adjacent to the range we
|
|
|
|
* are adding, if there is remove that struct and add a new one to
|
|
|
|
* cover the entire range
|
|
|
|
*/
|
|
|
|
right_info = tree_search_offset(&block_group->free_space_offset,
|
2009-04-03 22:14:19 +08:00
|
|
|
offset+bytes, 0, 0);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
left_info = tree_search_offset(&block_group->free_space_offset,
|
|
|
|
offset-1, 0, 1);
|
|
|
|
|
2009-04-03 22:14:19 +08:00
|
|
|
if (right_info) {
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
unlink_free_space(block_group, right_info);
|
2009-04-03 22:14:18 +08:00
|
|
|
info->bytes += right_info->bytes;
|
|
|
|
kfree(right_info);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
}
|
|
|
|
|
2009-04-03 22:14:19 +08:00
|
|
|
if (left_info && left_info->offset + left_info->bytes == offset) {
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
unlink_free_space(block_group, left_info);
|
2009-04-03 22:14:18 +08:00
|
|
|
info->offset = left_info->offset;
|
|
|
|
info->bytes += left_info->bytes;
|
|
|
|
kfree(left_info);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
ret = link_free_space(block_group, info);
|
|
|
|
if (ret)
|
|
|
|
kfree(info);
|
2009-04-03 22:14:18 +08:00
|
|
|
|
|
|
|
spin_unlock(&block_group->tree_lock);
|
|
|
|
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
if (ret) {
|
|
|
|
printk(KERN_ERR "btrfs: unable to add free space :%d\n", ret);
|
2009-04-03 05:05:11 +08:00
|
|
|
BUG_ON(ret == -EEXIST);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2009-04-03 22:14:18 +08:00
|
|
|
int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
|
|
|
|
u64 offset, u64 bytes)
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
{
|
|
|
|
struct btrfs_free_space *info;
|
|
|
|
int ret = 0;
|
|
|
|
|
2009-04-03 22:14:18 +08:00
|
|
|
spin_lock(&block_group->tree_lock);
|
|
|
|
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
info = tree_search_offset(&block_group->free_space_offset, offset, 0,
|
|
|
|
1);
|
|
|
|
if (info && info->offset == offset) {
|
|
|
|
if (info->bytes < bytes) {
|
2009-01-06 10:25:51 +08:00
|
|
|
printk(KERN_ERR "Found free space at %llu, size %llu,"
|
|
|
|
"trying to use %llu\n",
|
|
|
|
(unsigned long long)info->offset,
|
|
|
|
(unsigned long long)info->bytes,
|
|
|
|
(unsigned long long)bytes);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
WARN_ON(1);
|
|
|
|
ret = -EINVAL;
|
2009-04-03 22:14:18 +08:00
|
|
|
spin_unlock(&block_group->tree_lock);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
unlink_free_space(block_group, info);
|
|
|
|
|
|
|
|
if (info->bytes == bytes) {
|
|
|
|
kfree(info);
|
2009-04-03 22:14:18 +08:00
|
|
|
spin_unlock(&block_group->tree_lock);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
info->offset += bytes;
|
|
|
|
info->bytes -= bytes;
|
|
|
|
|
|
|
|
ret = link_free_space(block_group, info);
|
2009-04-03 22:14:18 +08:00
|
|
|
spin_unlock(&block_group->tree_lock);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
BUG_ON(ret);
|
2008-09-24 23:23:25 +08:00
|
|
|
} else if (info && info->offset < offset &&
|
|
|
|
info->offset + info->bytes >= offset + bytes) {
|
|
|
|
u64 old_start = info->offset;
|
|
|
|
/*
|
|
|
|
* we're freeing space in the middle of the info,
|
|
|
|
* this can happen during tree log replay
|
|
|
|
*
|
|
|
|
* first unlink the old info and then
|
|
|
|
* insert it again after the hole we're creating
|
|
|
|
*/
|
|
|
|
unlink_free_space(block_group, info);
|
|
|
|
if (offset + bytes < info->offset + info->bytes) {
|
|
|
|
u64 old_end = info->offset + info->bytes;
|
|
|
|
|
|
|
|
info->offset = offset + bytes;
|
|
|
|
info->bytes = old_end - info->offset;
|
|
|
|
ret = link_free_space(block_group, info);
|
|
|
|
BUG_ON(ret);
|
|
|
|
} else {
|
|
|
|
/* the hole we're creating ends at the end
|
|
|
|
* of the info struct, just free the info
|
|
|
|
*/
|
|
|
|
kfree(info);
|
|
|
|
}
|
2009-04-03 22:14:18 +08:00
|
|
|
spin_unlock(&block_group->tree_lock);
|
2008-09-24 23:23:25 +08:00
|
|
|
/* step two, insert a new info struct to cover anything
|
|
|
|
* before the hole
|
|
|
|
*/
|
2009-04-03 22:14:18 +08:00
|
|
|
ret = btrfs_add_free_space(block_group, old_start,
|
|
|
|
offset - old_start);
|
2008-09-24 23:23:25 +08:00
|
|
|
BUG_ON(ret);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
} else {
|
2009-04-03 22:14:18 +08:00
|
|
|
spin_unlock(&block_group->tree_lock);
|
2009-04-03 22:14:19 +08:00
|
|
|
if (!info) {
|
|
|
|
printk(KERN_ERR "couldn't find space %llu to free\n",
|
|
|
|
(unsigned long long)offset);
|
|
|
|
printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n",
|
|
|
|
block_group->cached, block_group->key.objectid,
|
|
|
|
block_group->key.offset);
|
|
|
|
btrfs_dump_free_space(block_group, bytes);
|
|
|
|
} else if (info) {
|
|
|
|
printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, "
|
|
|
|
"but wanted offset=%llu bytes=%llu\n",
|
|
|
|
info->offset, info->bytes, offset, bytes);
|
|
|
|
}
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
WARN_ON(1);
|
|
|
|
}
|
|
|
|
out:
|
Btrfs: nuke fs wide allocation mutex V2
This patch removes the giant fs_info->alloc_mutex and replaces it with a bunch
of little locks.
There is now a pinned_mutex, which is used when messing with the pinned_extents
extent io tree, and the extent_ins_mutex which is used with the pending_del and
extent_ins extent io trees.
The locking for the extent tree stuff was inspired by a patch that Yan Zheng
wrote to fix a race condition, I cleaned it up some and changed the locking
around a little bit, but the idea remains the same. Basically instead of
holding the extent_ins_mutex throughout the processing of an extent on the
extent_ins or pending_del trees, we just hold it while we're searching and when
we clear the bits on those trees, and lock the extent for the duration of the
operations on the extent.
Also to keep from getting hung up waiting to lock an extent, I've added a
try_lock_extent so if we cannot lock the extent, move on to the next one in the
tree and we'll come back to that one. I have tested this heavily and it does
not appear to break anything. This has to be applied on top of my
find_free_extent redo patch.
I tested this patch on top of Yan's space reblancing code and it worked fine.
The only thing that has changed since the last version is I pulled out all my
debugging stuff, apparently I forgot to run guilt refresh before I sent the
last patch out. Thank you,
Signed-off-by: Josef Bacik <jbacik@redhat.com>
2008-10-30 02:49:05 +08:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group,
|
|
|
|
u64 bytes)
|
|
|
|
{
|
|
|
|
struct btrfs_free_space *info;
|
|
|
|
struct rb_node *n;
|
|
|
|
int count = 0;
|
|
|
|
|
|
|
|
for (n = rb_first(&block_group->free_space_offset); n; n = rb_next(n)) {
|
|
|
|
info = rb_entry(n, struct btrfs_free_space, offset_index);
|
|
|
|
if (info->bytes >= bytes)
|
|
|
|
count++;
|
2009-04-03 22:14:19 +08:00
|
|
|
printk(KERN_ERR "entry offset %llu, bytes %llu\n", info->offset,
|
|
|
|
info->bytes);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
}
|
|
|
|
printk(KERN_INFO "%d blocks of free space at or bigger than bytes is"
|
|
|
|
"\n", count);
|
|
|
|
}
|
|
|
|
|
|
|
|
u64 btrfs_block_group_free_space(struct btrfs_block_group_cache *block_group)
|
|
|
|
{
|
|
|
|
struct btrfs_free_space *info;
|
|
|
|
struct rb_node *n;
|
|
|
|
u64 ret = 0;
|
|
|
|
|
|
|
|
for (n = rb_first(&block_group->free_space_offset); n;
|
|
|
|
n = rb_next(n)) {
|
|
|
|
info = rb_entry(n, struct btrfs_free_space, offset_index);
|
|
|
|
ret += info->bytes;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2009-04-03 21:47:43 +08:00
|
|
|
/*
|
|
|
|
* for a given cluster, put all of its extents back into the free
|
|
|
|
* space cache. If the block group passed doesn't match the block group
|
|
|
|
* pointed to by the cluster, someone else raced in and freed the
|
|
|
|
* cluster already. In that case, we just return without changing anything
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
__btrfs_return_cluster_to_free_space(
|
|
|
|
struct btrfs_block_group_cache *block_group,
|
|
|
|
struct btrfs_free_cluster *cluster)
|
|
|
|
{
|
|
|
|
struct btrfs_free_space *entry;
|
|
|
|
struct rb_node *node;
|
|
|
|
|
|
|
|
spin_lock(&cluster->lock);
|
|
|
|
if (cluster->block_group != block_group)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
cluster->window_start = 0;
|
|
|
|
node = rb_first(&cluster->root);
|
|
|
|
while(node) {
|
|
|
|
entry = rb_entry(node, struct btrfs_free_space, offset_index);
|
|
|
|
node = rb_next(&entry->offset_index);
|
|
|
|
rb_erase(&entry->offset_index, &cluster->root);
|
|
|
|
link_free_space(block_group, entry);
|
|
|
|
}
|
|
|
|
list_del_init(&cluster->block_group_list);
|
|
|
|
|
|
|
|
btrfs_put_block_group(cluster->block_group);
|
|
|
|
cluster->block_group = NULL;
|
|
|
|
cluster->root.rb_node = NULL;
|
|
|
|
out:
|
|
|
|
spin_unlock(&cluster->lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group)
|
|
|
|
{
|
|
|
|
struct btrfs_free_space *info;
|
|
|
|
struct rb_node *node;
|
2009-04-03 21:47:43 +08:00
|
|
|
struct btrfs_free_cluster *cluster;
|
|
|
|
struct btrfs_free_cluster *safe;
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
|
2009-04-03 22:14:18 +08:00
|
|
|
spin_lock(&block_group->tree_lock);
|
2009-04-03 21:47:43 +08:00
|
|
|
|
|
|
|
list_for_each_entry_safe(cluster, safe, &block_group->cluster_list,
|
|
|
|
block_group_list) {
|
|
|
|
|
|
|
|
WARN_ON(cluster->block_group != block_group);
|
|
|
|
__btrfs_return_cluster_to_free_space(block_group, cluster);
|
|
|
|
}
|
|
|
|
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
while ((node = rb_last(&block_group->free_space_bytes)) != NULL) {
|
|
|
|
info = rb_entry(node, struct btrfs_free_space, bytes_index);
|
|
|
|
unlink_free_space(block_group, info);
|
|
|
|
kfree(info);
|
|
|
|
if (need_resched()) {
|
2009-04-03 22:14:18 +08:00
|
|
|
spin_unlock(&block_group->tree_lock);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
cond_resched();
|
2009-04-03 22:14:18 +08:00
|
|
|
spin_lock(&block_group->tree_lock);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
}
|
|
|
|
}
|
2009-04-03 22:14:18 +08:00
|
|
|
spin_unlock(&block_group->tree_lock);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
}
|
|
|
|
|
2009-04-03 22:14:18 +08:00
|
|
|
u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group,
|
|
|
|
u64 offset, u64 bytes, u64 empty_size)
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
{
|
2009-04-03 22:14:18 +08:00
|
|
|
struct btrfs_free_space *entry = NULL;
|
|
|
|
u64 ret = 0;
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
|
2009-04-03 22:14:18 +08:00
|
|
|
spin_lock(&block_group->tree_lock);
|
|
|
|
entry = tree_search_offset(&block_group->free_space_offset, offset,
|
|
|
|
bytes + empty_size, 1);
|
|
|
|
if (!entry)
|
|
|
|
entry = tree_search_bytes(&block_group->free_space_bytes,
|
|
|
|
offset, bytes + empty_size);
|
|
|
|
if (entry) {
|
|
|
|
unlink_free_space(block_group, entry);
|
|
|
|
ret = entry->offset;
|
|
|
|
entry->offset += bytes;
|
|
|
|
entry->bytes -= bytes;
|
|
|
|
|
|
|
|
if (!entry->bytes)
|
|
|
|
kfree(entry);
|
|
|
|
else
|
|
|
|
link_free_space(block_group, entry);
|
|
|
|
}
|
|
|
|
spin_unlock(&block_group->tree_lock);
|
Btrfs: free space accounting redo
1) replace the per fs_info extent_io_tree that tracked free space with two
rb-trees per block group to track free space areas via offset and size. The
reason to do this is because most allocations come with a hint byte where to
start, so we can usually find a chunk of free space at that hint byte to satisfy
the allocation and get good space packing. If we cannot find free space at or
after the given offset we fall back on looking for a chunk of the given size as
close to that given offset as possible. When we fall back on the size search we
also try to find a slot as close to the size we want as possible, to avoid
breaking small chunks off of huge areas if possible.
2) remove the extent_io_tree that tracked the block group cache from fs_info and
replaced it with an rb-tree thats tracks block group cache via offset. also
added a per space_info list that tracks the block group cache for the particular
space so we can lookup related block groups easily.
3) cleaned up the allocation code to make it a little easier to read and a
little less complicated. Basically there are 3 steps, first look from our
provided hint. If we couldn't find from that given hint, start back at our
original search start and look for space from there. If that fails try to
allocate space if we can and start looking again. If not we're screwed and need
to start over again.
4) small fixes. there were some issues in volumes.c where we wouldn't allocate
the rest of the disk. fixed cow_file_range to actually pass the alloc_hint,
which has helped a good bit in making the fs_mark test I run have semi-normal
results as we run out of space. Generally with data allocations we don't track
where we last allocated from, so everytime we did a data allocation we'd search
through every block group that we have looking for free space. Now searching a
block group with no free space isn't terribly time consuming, it was causing a
slight degradation as we got more data block groups. The alloc_hint has fixed
this slight degredation and made things semi-normal.
There is still one nagging problem I'm working on where we will get ENOSPC when
there is definitely plenty of space. This only happens with metadata
allocations, and only when we are almost full. So you generally hit the 85%
mark first, but sometimes you'll hit the BUG before you hit the 85% wall. I'm
still tracking it down, but until then this seems to be pretty stable and make a
significant performance gain.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-24 01:14:11 +08:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
2009-04-03 21:47:43 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* given a cluster, put all of its extents back into the free space
|
|
|
|
* cache. If a block group is passed, this function will only free
|
|
|
|
* a cluster that belongs to the passed block group.
|
|
|
|
*
|
|
|
|
* Otherwise, it'll get a reference on the block group pointed to by the
|
|
|
|
* cluster and remove the cluster from it.
|
|
|
|
*/
|
|
|
|
int btrfs_return_cluster_to_free_space(
|
|
|
|
struct btrfs_block_group_cache *block_group,
|
|
|
|
struct btrfs_free_cluster *cluster)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* first, get a safe pointer to the block group */
|
|
|
|
spin_lock(&cluster->lock);
|
|
|
|
if (!block_group) {
|
|
|
|
block_group = cluster->block_group;
|
|
|
|
if (!block_group) {
|
|
|
|
spin_unlock(&cluster->lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
} else if (cluster->block_group != block_group) {
|
|
|
|
/* someone else has already freed it don't redo their work */
|
|
|
|
spin_unlock(&cluster->lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
atomic_inc(&block_group->count);
|
|
|
|
spin_unlock(&cluster->lock);
|
|
|
|
|
|
|
|
/* now return any extents the cluster had on it */
|
|
|
|
spin_lock(&block_group->tree_lock);
|
|
|
|
ret = __btrfs_return_cluster_to_free_space(block_group, cluster);
|
|
|
|
spin_unlock(&block_group->tree_lock);
|
|
|
|
|
|
|
|
/* finally drop our ref */
|
|
|
|
btrfs_put_block_group(block_group);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* given a cluster, try to allocate 'bytes' from it, returns 0
|
|
|
|
* if it couldn't find anything suitably large, or a logical disk offset
|
|
|
|
* if things worked out
|
|
|
|
*/
|
|
|
|
u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group,
|
|
|
|
struct btrfs_free_cluster *cluster, u64 bytes,
|
|
|
|
u64 min_start)
|
|
|
|
{
|
|
|
|
struct btrfs_free_space *entry = NULL;
|
|
|
|
struct rb_node *node;
|
|
|
|
u64 ret = 0;
|
|
|
|
|
|
|
|
spin_lock(&cluster->lock);
|
|
|
|
if (bytes > cluster->max_size)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (cluster->block_group != block_group)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
node = rb_first(&cluster->root);
|
|
|
|
if (!node)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
entry = rb_entry(node, struct btrfs_free_space, offset_index);
|
|
|
|
|
|
|
|
while(1) {
|
|
|
|
if (entry->bytes < bytes || entry->offset < min_start) {
|
|
|
|
struct rb_node *node;
|
|
|
|
|
|
|
|
node = rb_next(&entry->offset_index);
|
|
|
|
if (!node)
|
|
|
|
break;
|
|
|
|
entry = rb_entry(node, struct btrfs_free_space,
|
|
|
|
offset_index);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
ret = entry->offset;
|
|
|
|
|
|
|
|
entry->offset += bytes;
|
|
|
|
entry->bytes -= bytes;
|
|
|
|
|
|
|
|
if (entry->bytes == 0) {
|
|
|
|
rb_erase(&entry->offset_index, &cluster->root);
|
|
|
|
kfree(entry);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
out:
|
|
|
|
spin_unlock(&cluster->lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* here we try to find a cluster of blocks in a block group. The goal
|
|
|
|
* is to find at least bytes free and up to empty_size + bytes free.
|
|
|
|
* We might not find them all in one contiguous area.
|
|
|
|
*
|
|
|
|
* returns zero and sets up cluster if things worked out, otherwise
|
|
|
|
* it returns -enospc
|
|
|
|
*/
|
|
|
|
int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
|
|
|
|
struct btrfs_block_group_cache *block_group,
|
|
|
|
struct btrfs_free_cluster *cluster,
|
|
|
|
u64 offset, u64 bytes, u64 empty_size)
|
|
|
|
{
|
|
|
|
struct btrfs_free_space *entry = NULL;
|
|
|
|
struct rb_node *node;
|
|
|
|
struct btrfs_free_space *next;
|
|
|
|
struct btrfs_free_space *last;
|
|
|
|
u64 min_bytes;
|
|
|
|
u64 window_start;
|
|
|
|
u64 window_free;
|
|
|
|
u64 max_extent = 0;
|
|
|
|
int total_retries = 0;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* for metadata, allow allocates with more holes */
|
|
|
|
if (block_group->flags & BTRFS_BLOCK_GROUP_METADATA) {
|
|
|
|
/*
|
|
|
|
* we want to do larger allocations when we are
|
|
|
|
* flushing out the delayed refs, it helps prevent
|
|
|
|
* making more work as we go along.
|
|
|
|
*/
|
|
|
|
if (trans->transaction->delayed_refs.flushing)
|
|
|
|
min_bytes = max(bytes, (bytes + empty_size) >> 1);
|
|
|
|
else
|
|
|
|
min_bytes = max(bytes, (bytes + empty_size) >> 4);
|
|
|
|
} else
|
|
|
|
min_bytes = max(bytes, (bytes + empty_size) >> 2);
|
|
|
|
|
|
|
|
spin_lock(&block_group->tree_lock);
|
|
|
|
spin_lock(&cluster->lock);
|
|
|
|
|
|
|
|
/* someone already found a cluster, hooray */
|
|
|
|
if (cluster->block_group) {
|
|
|
|
ret = 0;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
again:
|
|
|
|
min_bytes = min(min_bytes, bytes + empty_size);
|
|
|
|
entry = tree_search_bytes(&block_group->free_space_bytes,
|
|
|
|
offset, min_bytes);
|
|
|
|
if (!entry) {
|
|
|
|
ret = -ENOSPC;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
window_start = entry->offset;
|
|
|
|
window_free = entry->bytes;
|
|
|
|
last = entry;
|
|
|
|
max_extent = entry->bytes;
|
|
|
|
|
|
|
|
while(1) {
|
|
|
|
/* out window is just right, lets fill it */
|
|
|
|
if (window_free >= bytes + empty_size)
|
|
|
|
break;
|
|
|
|
|
|
|
|
node = rb_next(&last->offset_index);
|
|
|
|
if (!node) {
|
|
|
|
ret = -ENOSPC;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
next = rb_entry(node, struct btrfs_free_space, offset_index);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* we haven't filled the empty size and the window is
|
|
|
|
* very large. reset and try again
|
|
|
|
*/
|
|
|
|
if (next->offset - window_start > (bytes + empty_size) * 2) {
|
|
|
|
entry = next;
|
|
|
|
window_start = entry->offset;
|
|
|
|
window_free = entry->bytes;
|
|
|
|
last = entry;
|
|
|
|
max_extent = 0;
|
|
|
|
total_retries++;
|
|
|
|
if (total_retries % 256 == 0) {
|
|
|
|
if (min_bytes >= (bytes + empty_size)) {
|
|
|
|
ret = -ENOSPC;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* grow our allocation a bit, we're not having
|
|
|
|
* much luck
|
|
|
|
*/
|
|
|
|
min_bytes *= 2;
|
|
|
|
goto again;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
last = next;
|
|
|
|
window_free += next->bytes;
|
|
|
|
if (entry->bytes > max_extent)
|
|
|
|
max_extent = entry->bytes;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
cluster->window_start = entry->offset;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* now we've found our entries, pull them out of the free space
|
|
|
|
* cache and put them into the cluster rbtree
|
|
|
|
*
|
|
|
|
* The cluster includes an rbtree, but only uses the offset index
|
|
|
|
* of each free space cache entry.
|
|
|
|
*/
|
|
|
|
while(1) {
|
|
|
|
node = rb_next(&entry->offset_index);
|
|
|
|
unlink_free_space(block_group, entry);
|
|
|
|
ret = tree_insert_offset(&cluster->root, entry->offset,
|
|
|
|
&entry->offset_index);
|
|
|
|
BUG_ON(ret);
|
|
|
|
|
|
|
|
if (!node || entry == last)
|
|
|
|
break;
|
|
|
|
|
|
|
|
entry = rb_entry(node, struct btrfs_free_space, offset_index);
|
|
|
|
}
|
|
|
|
ret = 0;
|
|
|
|
cluster->max_size = max_extent;
|
|
|
|
atomic_inc(&block_group->count);
|
|
|
|
list_add_tail(&cluster->block_group_list, &block_group->cluster_list);
|
|
|
|
cluster->block_group = block_group;
|
|
|
|
out:
|
|
|
|
spin_unlock(&cluster->lock);
|
|
|
|
spin_unlock(&block_group->tree_lock);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* simple code to zero out a cluster
|
|
|
|
*/
|
|
|
|
void btrfs_init_free_cluster(struct btrfs_free_cluster *cluster)
|
|
|
|
{
|
|
|
|
spin_lock_init(&cluster->lock);
|
|
|
|
spin_lock_init(&cluster->refill_lock);
|
|
|
|
cluster->root.rb_node = NULL;
|
|
|
|
cluster->max_size = 0;
|
|
|
|
INIT_LIST_HEAD(&cluster->block_group_list);
|
|
|
|
cluster->block_group = NULL;
|
|
|
|
}
|
|
|
|
|