OpenCloudOS-Kernel/arch/mips/kvm/mips.c

1663 lines
40 KiB
C
Raw Normal View History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* KVM/MIPS: MIPS specific KVM APIs
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
* Authors: Sanjay Lal <sanjayl@kymasys.com>
*/
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/err.h>
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
#include <linux/kdebug.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include <linux/sched/signal.h>
#include <linux/fs.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:49 +08:00
#include <linux/memblock.h>
mm: reorder includes after introduction of linux/pgtable.h The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:32:42 +08:00
#include <linux/pgtable.h>
KVM: MIPS: Don't leak FPU/DSP to guest The FPU and DSP are enabled via the CP0 Status CU1 and MX bits by kvm_mips_set_c0_status() on a guest exit, presumably in case there is active state that needs saving if pre-emption occurs. However neither of these bits are cleared again when returning to the guest. This effectively gives the guest access to the FPU/DSP hardware after the first guest exit even though it is not aware of its presence, allowing FP instructions in guest user code to intermittently actually execute instead of trapping into the guest OS for emulation. It will then read & manipulate the hardware FP registers which technically belong to the user process (e.g. QEMU), or are stale from another user process. It can also crash the guest OS by causing an FP exception, for which a guest exception handler won't have been registered. First lets save and disable the FPU (and MSA) state with lose_fpu(1) before entering the guest. This simplifies the problem, especially for when guest FPU/MSA support is added in the future, and prevents FR=1 FPU state being live when the FR bit gets cleared for the guest, which according to the architecture causes the contents of the FPU and vector registers to become UNPREDICTABLE. We can then safely remove the enabling of the FPU in kvm_mips_set_c0_status(), since there should never be any active FPU or MSA state to save at pre-emption, which should plug the FPU leak. DSP state is always live rather than being lazily restored, so for that it is simpler to just clear the MX bit again when re-entering the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # v3.10+: 044f0f03eca0: MIPS: KVM: Deliver guest interrupts Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-05 01:06:37 +08:00
#include <asm/fpu.h>
#include <asm/page.h>
#include <asm/cacheflush.h>
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
#include <linux/kvm_host.h>
#include "interrupt.h"
#define CREATE_TRACE_POINTS
#include "trace.h"
#ifndef VECTORSPACING
#define VECTORSPACING 0x100 /* for EI/VI mode */
#endif
const struct _kvm_stats_desc kvm_vm_stats_desc[] = {
KVM_GENERIC_VM_STATS()
};
const struct kvm_stats_header kvm_vm_stats_header = {
.name_size = KVM_STATS_NAME_SIZE,
.num_desc = ARRAY_SIZE(kvm_vm_stats_desc),
.id_offset = sizeof(struct kvm_stats_header),
.desc_offset = sizeof(struct kvm_stats_header) + KVM_STATS_NAME_SIZE,
.data_offset = sizeof(struct kvm_stats_header) + KVM_STATS_NAME_SIZE +
sizeof(kvm_vm_stats_desc),
};
const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = {
KVM_GENERIC_VCPU_STATS(),
STATS_DESC_COUNTER(VCPU, wait_exits),
STATS_DESC_COUNTER(VCPU, cache_exits),
STATS_DESC_COUNTER(VCPU, signal_exits),
STATS_DESC_COUNTER(VCPU, int_exits),
STATS_DESC_COUNTER(VCPU, cop_unusable_exits),
STATS_DESC_COUNTER(VCPU, tlbmod_exits),
STATS_DESC_COUNTER(VCPU, tlbmiss_ld_exits),
STATS_DESC_COUNTER(VCPU, tlbmiss_st_exits),
STATS_DESC_COUNTER(VCPU, addrerr_st_exits),
STATS_DESC_COUNTER(VCPU, addrerr_ld_exits),
STATS_DESC_COUNTER(VCPU, syscall_exits),
STATS_DESC_COUNTER(VCPU, resvd_inst_exits),
STATS_DESC_COUNTER(VCPU, break_inst_exits),
STATS_DESC_COUNTER(VCPU, trap_inst_exits),
STATS_DESC_COUNTER(VCPU, msa_fpe_exits),
STATS_DESC_COUNTER(VCPU, fpe_exits),
STATS_DESC_COUNTER(VCPU, msa_disabled_exits),
STATS_DESC_COUNTER(VCPU, flush_dcache_exits),
STATS_DESC_COUNTER(VCPU, vz_gpsi_exits),
STATS_DESC_COUNTER(VCPU, vz_gsfc_exits),
STATS_DESC_COUNTER(VCPU, vz_hc_exits),
STATS_DESC_COUNTER(VCPU, vz_grr_exits),
STATS_DESC_COUNTER(VCPU, vz_gva_exits),
STATS_DESC_COUNTER(VCPU, vz_ghfc_exits),
STATS_DESC_COUNTER(VCPU, vz_gpa_exits),
STATS_DESC_COUNTER(VCPU, vz_resvd_exits),
#ifdef CONFIG_CPU_LOONGSON64
STATS_DESC_COUNTER(VCPU, vz_cpucfg_exits),
#endif
};
const struct kvm_stats_header kvm_vcpu_stats_header = {
.name_size = KVM_STATS_NAME_SIZE,
.num_desc = ARRAY_SIZE(kvm_vcpu_stats_desc),
.id_offset = sizeof(struct kvm_stats_header),
.desc_offset = sizeof(struct kvm_stats_header) + KVM_STATS_NAME_SIZE,
.data_offset = sizeof(struct kvm_stats_header) + KVM_STATS_NAME_SIZE +
sizeof(kvm_vcpu_stats_desc),
};
bool kvm_trace_guest_mode_change;
int kvm_guest_mode_change_trace_reg(void)
{
kvm_trace_guest_mode_change = true;
return 0;
}
void kvm_guest_mode_change_trace_unreg(void)
{
kvm_trace_guest_mode_change = false;
}
/*
* XXXKYMA: We are simulatoring a processor that has the WII bit set in
* Config7, so we are "runnable" if interrupts are pending
*/
int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
{
return !!(vcpu->arch.pending_exceptions);
}
bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu)
{
return false;
}
int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
{
return 1;
}
int kvm_arch_hardware_enable(void)
{
return kvm_mips_callbacks->hardware_enable();
}
void kvm_arch_hardware_disable(void)
{
kvm_mips_callbacks->hardware_disable();
}
int kvm_arch_check_processor_compat(void *opaque)
{
return 0;
}
extern void kvm_init_loongson_ipi(struct kvm *kvm);
int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
{
2017-03-14 18:15:19 +08:00
switch (type) {
case KVM_VM_MIPS_AUTO:
break;
case KVM_VM_MIPS_VZ:
2017-03-14 18:15:19 +08:00
break;
default:
/* Unsupported KVM type */
return -EINVAL;
}
2017-03-14 18:15:19 +08:00
/* Allocate page table to map GPA -> RPA */
kvm->arch.gpa_mm.pgd = kvm_pgd_alloc();
if (!kvm->arch.gpa_mm.pgd)
return -ENOMEM;
#ifdef CONFIG_CPU_LOONGSON64
kvm_init_loongson_ipi(kvm);
#endif
return 0;
}
static void kvm_mips_free_gpa_pt(struct kvm *kvm)
{
/* It should always be safe to remove after flushing the whole range */
WARN_ON(!kvm_mips_flush_gpa_pt(kvm, 0, ~0));
pgd_free(NULL, kvm->arch.gpa_mm.pgd);
}
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvm_destroy_vcpus(kvm);
kvm_mips_free_gpa_pt(kvm);
}
long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl,
unsigned long arg)
{
return -ENOIOCTLCMD;
}
void kvm_arch_flush_shadow_all(struct kvm *kvm)
{
/* Flush whole GPA */
kvm_mips_flush_gpa_pt(kvm, 0, ~0);
kvm_flush_remote_tlbs(kvm);
}
void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
struct kvm_memory_slot *slot)
{
/*
* The slot has been made invalid (ready for moving or deletion), so we
* need to ensure that it can no longer be accessed by any guest VCPUs.
*/
spin_lock(&kvm->mmu_lock);
/* Flush slot from GPA */
kvm_mips_flush_gpa_pt(kvm, slot->base_gfn,
slot->base_gfn + slot->npages - 1);
kvm_arch_flush_remote_tlbs_memslot(kvm, slot);
spin_unlock(&kvm->mmu_lock);
}
int kvm_arch_prepare_memory_region(struct kvm *kvm,
const struct kvm_memory_slot *old,
struct kvm_memory_slot *new,
enum kvm_mr_change change)
{
return 0;
}
void kvm_arch_commit_memory_region(struct kvm *kvm,
struct kvm_memory_slot *old,
const struct kvm_memory_slot *new,
enum kvm_mr_change change)
{
int needs_flush;
/*
* If dirty page logging is enabled, write protect all pages in the slot
* ready for dirty logging.
*
* There is no need to do this in any of the following cases:
* CREATE: No dirty mappings will already exist.
* MOVE/DELETE: The old mappings will already have been cleaned up by
* kvm_arch_flush_shadow_memslot()
*/
if (change == KVM_MR_FLAGS_ONLY &&
(!(old->flags & KVM_MEM_LOG_DIRTY_PAGES) &&
new->flags & KVM_MEM_LOG_DIRTY_PAGES)) {
spin_lock(&kvm->mmu_lock);
/* Write protect GPA page table entries */
needs_flush = kvm_mips_mkclean_gpa_pt(kvm, new->base_gfn,
new->base_gfn + new->npages - 1);
if (needs_flush)
kvm_arch_flush_remote_tlbs_memslot(kvm, new);
spin_unlock(&kvm->mmu_lock);
}
}
static inline void dump_handler(const char *symbol, void *start, void *end)
{
u32 *p;
pr_debug("LEAF(%s)\n", symbol);
pr_debug("\t.set push\n");
pr_debug("\t.set noreorder\n");
for (p = start; p < (u32 *)end; ++p)
pr_debug("\t.word\t0x%08x\t\t# %p\n", *p, p);
pr_debug("\t.set\tpop\n");
pr_debug("\tEND(%s)\n", symbol);
}
/* low level hrtimer wake routine */
static enum hrtimer_restart kvm_mips_comparecount_wakeup(struct hrtimer *timer)
{
struct kvm_vcpu *vcpu;
vcpu = container_of(timer, struct kvm_vcpu, arch.comparecount_timer);
kvm_mips_callbacks->queue_timer_int(vcpu);
vcpu->arch.wait = 0;
rcuwait_wake_up(&vcpu->wait);
return kvm_mips_count_timeout(vcpu);
}
int kvm_arch_vcpu_precreate(struct kvm *kvm, unsigned int id)
{
return 0;
}
int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
{
int err, size;
void *gebase, *p, *handler, *refill_start, *refill_end;
int i;
kvm_debug("kvm @ %p: create cpu %d at %p\n",
vcpu->kvm, vcpu->vcpu_id, vcpu);
err = kvm_mips_callbacks->vcpu_init(vcpu);
if (err)
return err;
hrtimer_init(&vcpu->arch.comparecount_timer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
vcpu->arch.comparecount_timer.function = kvm_mips_comparecount_wakeup;
/*
* Allocate space for host mode exception handlers that handle
* guest mode exits
*/
if (cpu_has_veic || cpu_has_vint)
size = 0x200 + VECTORSPACING * 64;
else
size = 0x4000;
gebase = kzalloc(ALIGN(size, PAGE_SIZE), GFP_KERNEL);
if (!gebase) {
err = -ENOMEM;
goto out_uninit_vcpu;
}
kvm_debug("Allocated %d bytes for KVM Exception Handlers @ %p\n",
ALIGN(size, PAGE_SIZE), gebase);
/*
* Check new ebase actually fits in CP0_EBase. The lack of a write gate
* limits us to the low 512MB of physical address space. If the memory
* we allocate is out of range, just give up now.
*/
if (!cpu_has_ebase_wg && virt_to_phys(gebase) >= 0x20000000) {
kvm_err("CP0_EBase.WG required for guest exception base %pK\n",
gebase);
err = -ENOMEM;
goto out_free_gebase;
}
/* Save new ebase */
vcpu->arch.guest_ebase = gebase;
/* Build guest exception vectors dynamically in unmapped memory */
handler = gebase + 0x2000;
/* TLB refill (or XTLB refill on 64-bit VZ where KX=1) */
refill_start = gebase;
if (IS_ENABLED(CONFIG_64BIT))
refill_start += 0x080;
refill_end = kvm_mips_build_tlb_refill_exception(refill_start, handler);
/* General Exception Entry point */
kvm_mips_build_exception(gebase + 0x180, handler);
/* For vectored interrupts poke the exception code @ all offsets 0-7 */
for (i = 0; i < 8; i++) {
kvm_debug("L1 Vectored handler @ %p\n",
gebase + 0x200 + (i * VECTORSPACING));
kvm_mips_build_exception(gebase + 0x200 + i * VECTORSPACING,
handler);
}
/* General exit handler */
p = handler;
p = kvm_mips_build_exit(p);
/* Guest entry routine */
vcpu->arch.vcpu_run = p;
p = kvm_mips_build_vcpu_run(p);
/* Dump the generated code */
pr_debug("#include <asm/asm.h>\n");
pr_debug("#include <asm/regdef.h>\n");
pr_debug("\n");
dump_handler("kvm_vcpu_run", vcpu->arch.vcpu_run, p);
dump_handler("kvm_tlb_refill", refill_start, refill_end);
dump_handler("kvm_gen_exc", gebase + 0x180, gebase + 0x200);
dump_handler("kvm_exit", gebase + 0x2000, vcpu->arch.vcpu_run);
/* Invalidate the icache for these ranges */
flush_icache_range((unsigned long)gebase,
(unsigned long)gebase + ALIGN(size, PAGE_SIZE));
/* Init */
vcpu->arch.last_sched_cpu = -1;
vcpu->arch.last_exec_cpu = -1;
/* Initial guest state */
err = kvm_mips_callbacks->vcpu_setup(vcpu);
if (err)
goto out_free_gebase;
return 0;
out_free_gebase:
kfree(gebase);
out_uninit_vcpu:
kvm_mips_callbacks->vcpu_uninit(vcpu);
return err;
}
void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
{
hrtimer_cancel(&vcpu->arch.comparecount_timer);
kvm_mips_dump_stats(vcpu);
kvm_mmu_free_memory_caches(vcpu);
kfree(vcpu->arch.guest_ebase);
kvm_mips_callbacks->vcpu_uninit(vcpu);
}
int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
struct kvm_guest_debug *dbg)
{
return -ENOIOCTLCMD;
}
kvm/mips: rework guest entry logic In kvm_arch_vcpu_ioctl_run() we use guest_enter_irqoff() and guest_exit_irqoff() directly, with interrupts masked between these. As we don't handle any timer ticks during this window, we will not account time spent within the guest as guest time, which is unfortunate. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); In addition, as guest exits during the "run the vcpu" step are handled by kvm_mips_handle_exit(), a wrapper function is added which ensures that such exists are handled with a sequence: guest_state_exit_irqoff(); < handle the exit > guest_state_enter_irqoff(); This means that exits which stop the vCPU running will have a redundant guest_state_enter_irqoff() .. guest_state_exit_irqoff() sequence, which can be addressed with future rework. Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_mips_enter_exit_vcpu() helper which is marked noinstr. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Message-Id: <20220201132926.3301912-6-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-01 21:29:26 +08:00
/*
* Actually run the vCPU, entering an RCU extended quiescent state (EQS) while
* the vCPU is running.
*
* This must be noinstr as instrumentation may make use of RCU, and this is not
* safe during the EQS.
*/
static int noinstr kvm_mips_vcpu_enter_exit(struct kvm_vcpu *vcpu)
{
int ret;
guest_state_enter_irqoff();
ret = kvm_mips_callbacks->vcpu_run(vcpu);
guest_state_exit_irqoff();
return ret;
}
int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
{
int r = -EINTR;
vcpu_load(vcpu);
kvm_sigset_activate(vcpu);
if (vcpu->mmio_needed) {
if (!vcpu->mmio_is_write)
kvm_mips_complete_mmio_load(vcpu);
vcpu->mmio_needed = 0;
}
if (vcpu->run->immediate_exit)
goto out;
KVM: MIPS: Don't leak FPU/DSP to guest The FPU and DSP are enabled via the CP0 Status CU1 and MX bits by kvm_mips_set_c0_status() on a guest exit, presumably in case there is active state that needs saving if pre-emption occurs. However neither of these bits are cleared again when returning to the guest. This effectively gives the guest access to the FPU/DSP hardware after the first guest exit even though it is not aware of its presence, allowing FP instructions in guest user code to intermittently actually execute instead of trapping into the guest OS for emulation. It will then read & manipulate the hardware FP registers which technically belong to the user process (e.g. QEMU), or are stale from another user process. It can also crash the guest OS by causing an FP exception, for which a guest exception handler won't have been registered. First lets save and disable the FPU (and MSA) state with lose_fpu(1) before entering the guest. This simplifies the problem, especially for when guest FPU/MSA support is added in the future, and prevents FR=1 FPU state being live when the FR bit gets cleared for the guest, which according to the architecture causes the contents of the FPU and vector registers to become UNPREDICTABLE. We can then safely remove the enabling of the FPU in kvm_mips_set_c0_status(), since there should never be any active FPU or MSA state to save at pre-emption, which should plug the FPU leak. DSP state is always live rather than being lazily restored, so for that it is simpler to just clear the MX bit again when re-entering the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # v3.10+: 044f0f03eca0: MIPS: KVM: Deliver guest interrupts Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-05 01:06:37 +08:00
lose_fpu(1);
local_irq_disable();
kvm/mips: rework guest entry logic In kvm_arch_vcpu_ioctl_run() we use guest_enter_irqoff() and guest_exit_irqoff() directly, with interrupts masked between these. As we don't handle any timer ticks during this window, we will not account time spent within the guest as guest time, which is unfortunate. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); In addition, as guest exits during the "run the vcpu" step are handled by kvm_mips_handle_exit(), a wrapper function is added which ensures that such exists are handled with a sequence: guest_state_exit_irqoff(); < handle the exit > guest_state_enter_irqoff(); This means that exits which stop the vCPU running will have a redundant guest_state_enter_irqoff() .. guest_state_exit_irqoff() sequence, which can be addressed with future rework. Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_mips_enter_exit_vcpu() helper which is marked noinstr. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Message-Id: <20220201132926.3301912-6-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-01 21:29:26 +08:00
guest_timing_enter_irqoff();
trace_kvm_enter(vcpu);
/*
* Make sure the read of VCPU requests in vcpu_run() callback is not
* reordered ahead of the write to vcpu->mode, or we could miss a TLB
* flush request while the requester sees the VCPU as outside of guest
* mode and not needing an IPI.
*/
smp_store_mb(vcpu->mode, IN_GUEST_MODE);
kvm/mips: rework guest entry logic In kvm_arch_vcpu_ioctl_run() we use guest_enter_irqoff() and guest_exit_irqoff() directly, with interrupts masked between these. As we don't handle any timer ticks during this window, we will not account time spent within the guest as guest time, which is unfortunate. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); In addition, as guest exits during the "run the vcpu" step are handled by kvm_mips_handle_exit(), a wrapper function is added which ensures that such exists are handled with a sequence: guest_state_exit_irqoff(); < handle the exit > guest_state_enter_irqoff(); This means that exits which stop the vCPU running will have a redundant guest_state_enter_irqoff() .. guest_state_exit_irqoff() sequence, which can be addressed with future rework. Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_mips_enter_exit_vcpu() helper which is marked noinstr. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Message-Id: <20220201132926.3301912-6-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-01 21:29:26 +08:00
r = kvm_mips_vcpu_enter_exit(vcpu);
/*
* We must ensure that any pending interrupts are taken before
* we exit guest timing so that timer ticks are accounted as
* guest time. Transiently unmask interrupts so that any
* pending interrupts are taken.
*
* TODO: is there a barrier which ensures that pending interrupts are
* recognised? Currently this just hopes that the CPU takes any pending
* interrupts between the enable and disable.
*/
local_irq_enable();
local_irq_disable();
trace_kvm_out(vcpu);
kvm/mips: rework guest entry logic In kvm_arch_vcpu_ioctl_run() we use guest_enter_irqoff() and guest_exit_irqoff() directly, with interrupts masked between these. As we don't handle any timer ticks during this window, we will not account time spent within the guest as guest time, which is unfortunate. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); In addition, as guest exits during the "run the vcpu" step are handled by kvm_mips_handle_exit(), a wrapper function is added which ensures that such exists are handled with a sequence: guest_state_exit_irqoff(); < handle the exit > guest_state_enter_irqoff(); This means that exits which stop the vCPU running will have a redundant guest_state_enter_irqoff() .. guest_state_exit_irqoff() sequence, which can be addressed with future rework. Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_mips_enter_exit_vcpu() helper which is marked noinstr. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Message-Id: <20220201132926.3301912-6-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-01 21:29:26 +08:00
guest_timing_exit_irqoff();
local_irq_enable();
out:
kvm_sigset_deactivate(vcpu);
vcpu_put(vcpu);
return r;
}
int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
struct kvm_mips_interrupt *irq)
{
int intr = (int)irq->irq;
struct kvm_vcpu *dvcpu = NULL;
if (intr == kvm_priority_to_irq[MIPS_EXC_INT_IPI_1] ||
intr == kvm_priority_to_irq[MIPS_EXC_INT_IPI_2] ||
intr == (-kvm_priority_to_irq[MIPS_EXC_INT_IPI_1]) ||
intr == (-kvm_priority_to_irq[MIPS_EXC_INT_IPI_2]))
kvm_debug("%s: CPU: %d, INTR: %d\n", __func__, irq->cpu,
(int)intr);
if (irq->cpu == -1)
dvcpu = vcpu;
else
dvcpu = kvm_get_vcpu(vcpu->kvm, irq->cpu);
if (intr == 2 || intr == 3 || intr == 4 || intr == 6) {
kvm_mips_callbacks->queue_io_int(dvcpu, irq);
} else if (intr == -2 || intr == -3 || intr == -4 || intr == -6) {
kvm_mips_callbacks->dequeue_io_int(dvcpu, irq);
} else {
kvm_err("%s: invalid interrupt ioctl (%d:%d)\n", __func__,
irq->cpu, irq->irq);
return -EINVAL;
}
dvcpu->arch.wait = 0;
rcuwait_wake_up(&dvcpu->wait);
return 0;
}
int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
struct kvm_mp_state *mp_state)
{
return -ENOIOCTLCMD;
}
int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
struct kvm_mp_state *mp_state)
{
return -ENOIOCTLCMD;
}
static u64 kvm_mips_get_one_regs[] = {
KVM_REG_MIPS_R0,
KVM_REG_MIPS_R1,
KVM_REG_MIPS_R2,
KVM_REG_MIPS_R3,
KVM_REG_MIPS_R4,
KVM_REG_MIPS_R5,
KVM_REG_MIPS_R6,
KVM_REG_MIPS_R7,
KVM_REG_MIPS_R8,
KVM_REG_MIPS_R9,
KVM_REG_MIPS_R10,
KVM_REG_MIPS_R11,
KVM_REG_MIPS_R12,
KVM_REG_MIPS_R13,
KVM_REG_MIPS_R14,
KVM_REG_MIPS_R15,
KVM_REG_MIPS_R16,
KVM_REG_MIPS_R17,
KVM_REG_MIPS_R18,
KVM_REG_MIPS_R19,
KVM_REG_MIPS_R20,
KVM_REG_MIPS_R21,
KVM_REG_MIPS_R22,
KVM_REG_MIPS_R23,
KVM_REG_MIPS_R24,
KVM_REG_MIPS_R25,
KVM_REG_MIPS_R26,
KVM_REG_MIPS_R27,
KVM_REG_MIPS_R28,
KVM_REG_MIPS_R29,
KVM_REG_MIPS_R30,
KVM_REG_MIPS_R31,
#ifndef CONFIG_CPU_MIPSR6
KVM_REG_MIPS_HI,
KVM_REG_MIPS_LO,
#endif
KVM_REG_MIPS_PC,
};
static u64 kvm_mips_get_one_regs_fpu[] = {
KVM_REG_MIPS_FCR_IR,
KVM_REG_MIPS_FCR_CSR,
};
static u64 kvm_mips_get_one_regs_msa[] = {
KVM_REG_MIPS_MSA_IR,
KVM_REG_MIPS_MSA_CSR,
};
static unsigned long kvm_mips_num_regs(struct kvm_vcpu *vcpu)
{
unsigned long ret;
ret = ARRAY_SIZE(kvm_mips_get_one_regs);
if (kvm_mips_guest_can_have_fpu(&vcpu->arch)) {
ret += ARRAY_SIZE(kvm_mips_get_one_regs_fpu) + 48;
/* odd doubles */
if (boot_cpu_data.fpu_id & MIPS_FPIR_F64)
ret += 16;
}
if (kvm_mips_guest_can_have_msa(&vcpu->arch))
ret += ARRAY_SIZE(kvm_mips_get_one_regs_msa) + 32;
ret += kvm_mips_callbacks->num_regs(vcpu);
return ret;
}
static int kvm_mips_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices)
{
u64 index;
unsigned int i;
if (copy_to_user(indices, kvm_mips_get_one_regs,
sizeof(kvm_mips_get_one_regs)))
return -EFAULT;
indices += ARRAY_SIZE(kvm_mips_get_one_regs);
if (kvm_mips_guest_can_have_fpu(&vcpu->arch)) {
if (copy_to_user(indices, kvm_mips_get_one_regs_fpu,
sizeof(kvm_mips_get_one_regs_fpu)))
return -EFAULT;
indices += ARRAY_SIZE(kvm_mips_get_one_regs_fpu);
for (i = 0; i < 32; ++i) {
index = KVM_REG_MIPS_FPR_32(i);
if (copy_to_user(indices, &index, sizeof(index)))
return -EFAULT;
++indices;
/* skip odd doubles if no F64 */
if (i & 1 && !(boot_cpu_data.fpu_id & MIPS_FPIR_F64))
continue;
index = KVM_REG_MIPS_FPR_64(i);
if (copy_to_user(indices, &index, sizeof(index)))
return -EFAULT;
++indices;
}
}
if (kvm_mips_guest_can_have_msa(&vcpu->arch)) {
if (copy_to_user(indices, kvm_mips_get_one_regs_msa,
sizeof(kvm_mips_get_one_regs_msa)))
return -EFAULT;
indices += ARRAY_SIZE(kvm_mips_get_one_regs_msa);
for (i = 0; i < 32; ++i) {
index = KVM_REG_MIPS_VEC_128(i);
if (copy_to_user(indices, &index, sizeof(index)))
return -EFAULT;
++indices;
}
}
return kvm_mips_callbacks->copy_reg_indices(vcpu, indices);
}
static int kvm_mips_get_reg(struct kvm_vcpu *vcpu,
const struct kvm_one_reg *reg)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_fpu_struct *fpu = &vcpu->arch.fpu;
int ret;
s64 v;
s64 vs[2];
unsigned int idx;
switch (reg->id) {
/* General purpose registers */
case KVM_REG_MIPS_R0 ... KVM_REG_MIPS_R31:
v = (long)vcpu->arch.gprs[reg->id - KVM_REG_MIPS_R0];
break;
#ifndef CONFIG_CPU_MIPSR6
case KVM_REG_MIPS_HI:
v = (long)vcpu->arch.hi;
break;
case KVM_REG_MIPS_LO:
v = (long)vcpu->arch.lo;
break;
#endif
case KVM_REG_MIPS_PC:
v = (long)vcpu->arch.pc;
break;
/* Floating point registers */
case KVM_REG_MIPS_FPR_32(0) ... KVM_REG_MIPS_FPR_32(31):
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_FPR_32(0);
/* Odd singles in top of even double when FR=0 */
if (kvm_read_c0_guest_status(cop0) & ST0_FR)
v = get_fpr32(&fpu->fpr[idx], 0);
else
v = get_fpr32(&fpu->fpr[idx & ~1], idx & 1);
break;
case KVM_REG_MIPS_FPR_64(0) ... KVM_REG_MIPS_FPR_64(31):
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_FPR_64(0);
/* Can't access odd doubles in FR=0 mode */
if (idx & 1 && !(kvm_read_c0_guest_status(cop0) & ST0_FR))
return -EINVAL;
v = get_fpr64(&fpu->fpr[idx], 0);
break;
case KVM_REG_MIPS_FCR_IR:
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
v = boot_cpu_data.fpu_id;
break;
case KVM_REG_MIPS_FCR_CSR:
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
v = fpu->fcr31;
break;
/* MIPS SIMD Architecture (MSA) registers */
case KVM_REG_MIPS_VEC_128(0) ... KVM_REG_MIPS_VEC_128(31):
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
/* Can't access MSA registers in FR=0 mode */
if (!(kvm_read_c0_guest_status(cop0) & ST0_FR))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_VEC_128(0);
#ifdef CONFIG_CPU_LITTLE_ENDIAN
/* least significant byte first */
vs[0] = get_fpr64(&fpu->fpr[idx], 0);
vs[1] = get_fpr64(&fpu->fpr[idx], 1);
#else
/* most significant byte first */
vs[0] = get_fpr64(&fpu->fpr[idx], 1);
vs[1] = get_fpr64(&fpu->fpr[idx], 0);
#endif
break;
case KVM_REG_MIPS_MSA_IR:
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
v = boot_cpu_data.msa_id;
break;
case KVM_REG_MIPS_MSA_CSR:
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
v = fpu->msacsr;
break;
/* registers to be handled specially */
default:
ret = kvm_mips_callbacks->get_one_reg(vcpu, reg, &v);
if (ret)
return ret;
break;
}
if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U64) {
u64 __user *uaddr64 = (u64 __user *)(long)reg->addr;
return put_user(v, uaddr64);
} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U32) {
u32 __user *uaddr32 = (u32 __user *)(long)reg->addr;
u32 v32 = (u32)v;
return put_user(v32, uaddr32);
} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U128) {
void __user *uaddr = (void __user *)(long)reg->addr;
return copy_to_user(uaddr, vs, 16) ? -EFAULT : 0;
} else {
return -EINVAL;
}
}
static int kvm_mips_set_reg(struct kvm_vcpu *vcpu,
const struct kvm_one_reg *reg)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_fpu_struct *fpu = &vcpu->arch.fpu;
s64 v;
s64 vs[2];
unsigned int idx;
if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U64) {
u64 __user *uaddr64 = (u64 __user *)(long)reg->addr;
if (get_user(v, uaddr64) != 0)
return -EFAULT;
} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U32) {
u32 __user *uaddr32 = (u32 __user *)(long)reg->addr;
s32 v32;
if (get_user(v32, uaddr32) != 0)
return -EFAULT;
v = (s64)v32;
} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U128) {
void __user *uaddr = (void __user *)(long)reg->addr;
return copy_from_user(vs, uaddr, 16) ? -EFAULT : 0;
} else {
return -EINVAL;
}
switch (reg->id) {
/* General purpose registers */
case KVM_REG_MIPS_R0:
/* Silently ignore requests to set $0 */
break;
case KVM_REG_MIPS_R1 ... KVM_REG_MIPS_R31:
vcpu->arch.gprs[reg->id - KVM_REG_MIPS_R0] = v;
break;
#ifndef CONFIG_CPU_MIPSR6
case KVM_REG_MIPS_HI:
vcpu->arch.hi = v;
break;
case KVM_REG_MIPS_LO:
vcpu->arch.lo = v;
break;
#endif
case KVM_REG_MIPS_PC:
vcpu->arch.pc = v;
break;
/* Floating point registers */
case KVM_REG_MIPS_FPR_32(0) ... KVM_REG_MIPS_FPR_32(31):
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_FPR_32(0);
/* Odd singles in top of even double when FR=0 */
if (kvm_read_c0_guest_status(cop0) & ST0_FR)
set_fpr32(&fpu->fpr[idx], 0, v);
else
set_fpr32(&fpu->fpr[idx & ~1], idx & 1, v);
break;
case KVM_REG_MIPS_FPR_64(0) ... KVM_REG_MIPS_FPR_64(31):
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_FPR_64(0);
/* Can't access odd doubles in FR=0 mode */
if (idx & 1 && !(kvm_read_c0_guest_status(cop0) & ST0_FR))
return -EINVAL;
set_fpr64(&fpu->fpr[idx], 0, v);
break;
case KVM_REG_MIPS_FCR_IR:
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
/* Read-only */
break;
case KVM_REG_MIPS_FCR_CSR:
if (!kvm_mips_guest_has_fpu(&vcpu->arch))
return -EINVAL;
fpu->fcr31 = v;
break;
/* MIPS SIMD Architecture (MSA) registers */
case KVM_REG_MIPS_VEC_128(0) ... KVM_REG_MIPS_VEC_128(31):
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
idx = reg->id - KVM_REG_MIPS_VEC_128(0);
#ifdef CONFIG_CPU_LITTLE_ENDIAN
/* least significant byte first */
set_fpr64(&fpu->fpr[idx], 0, vs[0]);
set_fpr64(&fpu->fpr[idx], 1, vs[1]);
#else
/* most significant byte first */
set_fpr64(&fpu->fpr[idx], 1, vs[0]);
set_fpr64(&fpu->fpr[idx], 0, vs[1]);
#endif
break;
case KVM_REG_MIPS_MSA_IR:
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
/* Read-only */
break;
case KVM_REG_MIPS_MSA_CSR:
if (!kvm_mips_guest_has_msa(&vcpu->arch))
return -EINVAL;
fpu->msacsr = v;
break;
/* registers to be handled specially */
default:
return kvm_mips_callbacks->set_one_reg(vcpu, reg, v);
}
return 0;
}
static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
struct kvm_enable_cap *cap)
{
int r = 0;
if (!kvm_vm_ioctl_check_extension(vcpu->kvm, cap->cap))
return -EINVAL;
if (cap->flags)
return -EINVAL;
if (cap->args[0])
return -EINVAL;
switch (cap->cap) {
case KVM_CAP_MIPS_FPU:
vcpu->arch.fpu_enabled = true;
break;
case KVM_CAP_MIPS_MSA:
vcpu->arch.msa_enabled = true;
break;
default:
r = -EINVAL;
break;
}
return r;
}
long kvm_arch_vcpu_async_ioctl(struct file *filp, unsigned int ioctl,
unsigned long arg)
{
struct kvm_vcpu *vcpu = filp->private_data;
void __user *argp = (void __user *)arg;
if (ioctl == KVM_INTERRUPT) {
struct kvm_mips_interrupt irq;
if (copy_from_user(&irq, argp, sizeof(irq)))
return -EFAULT;
kvm_debug("[%d] %s: irq: %d\n", vcpu->vcpu_id, __func__,
irq.irq);
return kvm_vcpu_ioctl_interrupt(vcpu, &irq);
}
return -ENOIOCTLCMD;
}
long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl,
unsigned long arg)
{
struct kvm_vcpu *vcpu = filp->private_data;
void __user *argp = (void __user *)arg;
long r;
vcpu_load(vcpu);
switch (ioctl) {
case KVM_SET_ONE_REG:
case KVM_GET_ONE_REG: {
struct kvm_one_reg reg;
r = -EFAULT;
if (copy_from_user(&reg, argp, sizeof(reg)))
break;
if (ioctl == KVM_SET_ONE_REG)
r = kvm_mips_set_reg(vcpu, &reg);
else
r = kvm_mips_get_reg(vcpu, &reg);
break;
}
case KVM_GET_REG_LIST: {
struct kvm_reg_list __user *user_list = argp;
struct kvm_reg_list reg_list;
unsigned n;
r = -EFAULT;
if (copy_from_user(&reg_list, user_list, sizeof(reg_list)))
break;
n = reg_list.n;
reg_list.n = kvm_mips_num_regs(vcpu);
if (copy_to_user(user_list, &reg_list, sizeof(reg_list)))
break;
r = -E2BIG;
if (n < reg_list.n)
break;
r = kvm_mips_copy_reg_indices(vcpu, user_list->reg);
break;
}
case KVM_ENABLE_CAP: {
struct kvm_enable_cap cap;
r = -EFAULT;
if (copy_from_user(&cap, argp, sizeof(cap)))
break;
r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
break;
}
default:
r = -ENOIOCTLCMD;
}
vcpu_put(vcpu);
return r;
}
void kvm_arch_sync_dirty_log(struct kvm *kvm, struct kvm_memory_slot *memslot)
{
}
int kvm_arch_flush_remote_tlb(struct kvm *kvm)
{
kvm_mips_callbacks->prepare_flush_shadow(kvm);
return 1;
}
void kvm_arch_flush_remote_tlbs_memslot(struct kvm *kvm,
const struct kvm_memory_slot *memslot)
{
kvm_flush_remote_tlbs(kvm);
}
long kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
{
long r;
switch (ioctl) {
default:
r = -ENOIOCTLCMD;
}
return r;
}
int kvm_arch_init(void *opaque)
{
return kvm_mips_emulation_init();
}
void kvm_arch_exit(void)
{
}
int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
struct kvm_sregs *sregs)
{
return -ENOIOCTLCMD;
}
int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
struct kvm_sregs *sregs)
{
return -ENOIOCTLCMD;
}
void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
{
}
int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
{
return -ENOIOCTLCMD;
}
int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
{
return -ENOIOCTLCMD;
}
vm_fault_t kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf)
{
return VM_FAULT_SIGBUS;
}
int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
{
int r;
switch (ext) {
case KVM_CAP_ONE_REG:
case KVM_CAP_ENABLE_CAP:
case KVM_CAP_READONLY_MEM:
KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU Implement the SYNC_MMU capability for KVM MIPS, allowing changes in the underlying user host virtual address (HVA) mappings to be promptly reflected in the corresponding guest physical address (GPA) mappings. This allows for several features to work with guest RAM which require mappings to be altered or protected, such as copy-on-write, KSM (Kernel Samepage Merging), idle page tracking, memory swapping, and guest memory ballooning. There are two main aspects of this change, described below. The KVM MMU notifier architecture callbacks are implemented so we can be notified of changes in the HVA mappings. These arrange for the guest physical address (GPA) page tables to be modified and possibly for derived mappings (GVA page tables and TLBs) to be flushed. - kvm_unmap_hva[_range]() - These deal with HVA mappings being removed, for example before a copy-on-write takes place, which requires the corresponding GPA page table mappings to be removed too. - kvm_set_spte_hva() - These update a GPA page table entry to match the new HVA entry, but must be careful to respect KVM specific configuration such as not dirtying a clean guest page which is dirty to the host, and write protecting writable pages in read only memslots (which will soon be supported). - kvm[_test]_age_hva() - These update GPA page table entries to be old (invalid) so that access can be tracked, making them young again. The GPA page fault handling (kvm_mips_map_page) is updated to use gfn_to_pfn_prot() (which may provide read-only pages), to handle asynchronous page table invalidation from MMU notifier callbacks, and to handle more cases in the fast path. - mmu_notifier_seq is used to detect asynchronous page table invalidations while we're holding a pfn from gfn_to_pfn_prot() outside of kvm->mmu_lock, retrying if invalidations have taken place, e.g. a COW or a KSM page merge. - The fast path (_kvm_mips_map_page_fast) now handles marking old pages as young / accessed, and disallowing dirtying of clean pages that aren't actually writable (e.g. shared pages that should COW, and read-only memory regions when they are enabled in a future patch). - Due to the use of MMU notifications we no longer need to keep the page references after we've updated the GPA page tables. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2016-12-14 00:32:39 +08:00
case KVM_CAP_SYNC_MMU:
case KVM_CAP_IMMEDIATE_EXIT:
r = 1;
break;
case KVM_CAP_NR_VCPUS:
r = min_t(unsigned int, num_online_cpus(), KVM_MAX_VCPUS);
break;
case KVM_CAP_MAX_VCPUS:
r = KVM_MAX_VCPUS;
break;
case KVM_CAP_MAX_VCPU_ID:
r = KVM_MAX_VCPU_IDS;
break;
case KVM_CAP_MIPS_FPU:
/* We don't handle systems with inconsistent cpu_has_fpu */
r = !!raw_cpu_has_fpu;
break;
case KVM_CAP_MIPS_MSA:
/*
* We don't support MSA vector partitioning yet:
* 1) It would require explicit support which can't be tested
* yet due to lack of support in current hardware.
* 2) It extends the state that would need to be saved/restored
* by e.g. QEMU for migration.
*
* When vector partitioning hardware becomes available, support
* could be added by requiring a flag when enabling
* KVM_CAP_MIPS_MSA capability to indicate that userland knows
* to save/restore the appropriate extra state.
*/
r = cpu_has_msa && !(boot_cpu_data.msa_id & MSA_IR_WRPF);
break;
default:
r = kvm_mips_callbacks->check_extension(kvm, ext);
break;
}
return r;
}
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
{
return kvm_mips_pending_timer(vcpu) ||
kvm_read_c0_guest_cause(vcpu->arch.cop0) & C_TI;
}
int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu)
{
int i;
struct mips_coproc *cop0;
if (!vcpu)
return -1;
kvm_debug("VCPU Register Dump:\n");
kvm_debug("\tpc = 0x%08lx\n", vcpu->arch.pc);
kvm_debug("\texceptions: %08lx\n", vcpu->arch.pending_exceptions);
for (i = 0; i < 32; i += 4) {
kvm_debug("\tgpr%02d: %08lx %08lx %08lx %08lx\n", i,
vcpu->arch.gprs[i],
vcpu->arch.gprs[i + 1],
vcpu->arch.gprs[i + 2], vcpu->arch.gprs[i + 3]);
}
kvm_debug("\thi: 0x%08lx\n", vcpu->arch.hi);
kvm_debug("\tlo: 0x%08lx\n", vcpu->arch.lo);
cop0 = vcpu->arch.cop0;
KVM: MIPS: Abstract guest CP0 register access for VZ Abstract the MIPS KVM guest CP0 register access macros into inline functions which are generated by macros. This allows them to be generated differently for VZ, where they will usually need to access the hardware guest CP0 context rather than the saved values in RAM. Accessors for each individual register are generated using these macros: - __BUILD_KVM_*_SW() for registers which are not present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the saved value in RAM regardless of whether VZ is enabled. - __BUILD_KVM_*_HW() for registers which are present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the hardware register when VZ is enabled. These build the underlying accessors using further macros: - __BUILD_KVM_*_SAVED() builds e.g. kvm_{read,write}_sw_gc0_##name() functions for accessing the saved versions of the registers in RAM. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with T&E where registers are always stored in RAM, but are also available with VZ HW registers to allow them to be accessed while saved. - __BUILD_KVM_*_VZ() builds e.g. kvm_{read,write}_vz_gc0_##name() functions for accessing the VZ hardware guest context registers directly. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with VZ. - __BUILD_KVM_*_WRAP() builds wrappers with different names, which allows the common kvm_{read,write}_c0_guest_##name() functions to be implemented using the VZ accessors while still having the SAVED accessors available too. - __BUILD_KVM_SAVE_VZ() builds functions for saving and restoring VZ hardware guest context register state to RAM, improving conciseness of VZ context saving and restoring. Similar macros exist for generating modifiers (set, clear, change), either with a normal unlocked read/modify/write, or using atomic LL/SC sequences. These changes change the types of 32-bit registers to u32 instead of unsigned long, which requires some changes to printk() functions in MIPS KVM. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-03-14 18:15:25 +08:00
kvm_debug("\tStatus: 0x%08x, Cause: 0x%08x\n",
kvm_read_c0_guest_status(cop0),
kvm_read_c0_guest_cause(cop0));
kvm_debug("\tEPC: 0x%08lx\n", kvm_read_c0_guest_epc(cop0));
return 0;
}
int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
{
int i;
vcpu_load(vcpu);
for (i = 1; i < ARRAY_SIZE(vcpu->arch.gprs); i++)
vcpu->arch.gprs[i] = regs->gpr[i];
vcpu->arch.gprs[0] = 0; /* zero is special, and cannot be set. */
vcpu->arch.hi = regs->hi;
vcpu->arch.lo = regs->lo;
vcpu->arch.pc = regs->pc;
vcpu_put(vcpu);
return 0;
}
int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
{
int i;
vcpu_load(vcpu);
for (i = 0; i < ARRAY_SIZE(vcpu->arch.gprs); i++)
regs->gpr[i] = vcpu->arch.gprs[i];
regs->hi = vcpu->arch.hi;
regs->lo = vcpu->arch.lo;
regs->pc = vcpu->arch.pc;
vcpu_put(vcpu);
return 0;
}
int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
struct kvm_translation *tr)
{
return 0;
}
static void kvm_mips_set_c0_status(void)
{
u32 status = read_c0_status();
if (cpu_has_dsp)
status |= (ST0_MX);
write_c0_status(status);
ehb();
}
/*
* Return value is in the form (errcode<<2 | RESUME_FLAG_HOST | RESUME_FLAG_NV)
*/
kvm/mips: rework guest entry logic In kvm_arch_vcpu_ioctl_run() we use guest_enter_irqoff() and guest_exit_irqoff() directly, with interrupts masked between these. As we don't handle any timer ticks during this window, we will not account time spent within the guest as guest time, which is unfortunate. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); In addition, as guest exits during the "run the vcpu" step are handled by kvm_mips_handle_exit(), a wrapper function is added which ensures that such exists are handled with a sequence: guest_state_exit_irqoff(); < handle the exit > guest_state_enter_irqoff(); This means that exits which stop the vCPU running will have a redundant guest_state_enter_irqoff() .. guest_state_exit_irqoff() sequence, which can be addressed with future rework. Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_mips_enter_exit_vcpu() helper which is marked noinstr. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Message-Id: <20220201132926.3301912-6-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-01 21:29:26 +08:00
static int __kvm_mips_handle_exit(struct kvm_vcpu *vcpu)
{
struct kvm_run *run = vcpu->run;
u32 cause = vcpu->arch.host_cp0_cause;
u32 exccode = (cause >> CAUSEB_EXCCODE) & 0x1f;
u32 __user *opc = (u32 __user *) vcpu->arch.pc;
unsigned long badvaddr = vcpu->arch.host_cp0_badvaddr;
enum emulation_result er = EMULATE_DONE;
u32 inst;
int ret = RESUME_GUEST;
vcpu->mode = OUTSIDE_GUEST_MODE;
/* Set a default exit reason */
run->exit_reason = KVM_EXIT_UNKNOWN;
run->ready_for_interrupt_injection = 1;
/*
* Set the appropriate status bits based on host CPU features,
* before we hit the scheduler
*/
kvm_mips_set_c0_status();
local_irq_enable();
kvm_debug("kvm_mips_handle_exit: cause: %#x, PC: %p, kvm_run: %p, kvm_vcpu: %p\n",
cause, opc, run, vcpu);
trace_kvm_exit(vcpu, exccode);
switch (exccode) {
case EXCCODE_INT:
kvm_debug("[%d]EXCCODE_INT @ %p\n", vcpu->vcpu_id, opc);
++vcpu->stat.int_exits;
if (need_resched())
cond_resched();
ret = RESUME_GUEST;
break;
case EXCCODE_CPU:
kvm_debug("EXCCODE_CPU: @ PC: %p\n", opc);
++vcpu->stat.cop_unusable_exits;
ret = kvm_mips_callbacks->handle_cop_unusable(vcpu);
/* XXXKYMA: Might need to return to user space */
if (run->exit_reason == KVM_EXIT_IRQ_WINDOW_OPEN)
ret = RESUME_HOST;
break;
case EXCCODE_MOD:
++vcpu->stat.tlbmod_exits;
ret = kvm_mips_callbacks->handle_tlb_mod(vcpu);
break;
case EXCCODE_TLBS:
KVM: MIPS: Abstract guest CP0 register access for VZ Abstract the MIPS KVM guest CP0 register access macros into inline functions which are generated by macros. This allows them to be generated differently for VZ, where they will usually need to access the hardware guest CP0 context rather than the saved values in RAM. Accessors for each individual register are generated using these macros: - __BUILD_KVM_*_SW() for registers which are not present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the saved value in RAM regardless of whether VZ is enabled. - __BUILD_KVM_*_HW() for registers which are present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the hardware register when VZ is enabled. These build the underlying accessors using further macros: - __BUILD_KVM_*_SAVED() builds e.g. kvm_{read,write}_sw_gc0_##name() functions for accessing the saved versions of the registers in RAM. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with T&E where registers are always stored in RAM, but are also available with VZ HW registers to allow them to be accessed while saved. - __BUILD_KVM_*_VZ() builds e.g. kvm_{read,write}_vz_gc0_##name() functions for accessing the VZ hardware guest context registers directly. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with VZ. - __BUILD_KVM_*_WRAP() builds wrappers with different names, which allows the common kvm_{read,write}_c0_guest_##name() functions to be implemented using the VZ accessors while still having the SAVED accessors available too. - __BUILD_KVM_SAVE_VZ() builds functions for saving and restoring VZ hardware guest context register state to RAM, improving conciseness of VZ context saving and restoring. Similar macros exist for generating modifiers (set, clear, change), either with a normal unlocked read/modify/write, or using atomic LL/SC sequences. These changes change the types of 32-bit registers to u32 instead of unsigned long, which requires some changes to printk() functions in MIPS KVM. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-03-14 18:15:25 +08:00
kvm_debug("TLB ST fault: cause %#x, status %#x, PC: %p, BadVaddr: %#lx\n",
cause, kvm_read_c0_guest_status(vcpu->arch.cop0), opc,
badvaddr);
++vcpu->stat.tlbmiss_st_exits;
ret = kvm_mips_callbacks->handle_tlb_st_miss(vcpu);
break;
case EXCCODE_TLBL:
kvm_debug("TLB LD fault: cause %#x, PC: %p, BadVaddr: %#lx\n",
cause, opc, badvaddr);
++vcpu->stat.tlbmiss_ld_exits;
ret = kvm_mips_callbacks->handle_tlb_ld_miss(vcpu);
break;
case EXCCODE_ADES:
++vcpu->stat.addrerr_st_exits;
ret = kvm_mips_callbacks->handle_addr_err_st(vcpu);
break;
case EXCCODE_ADEL:
++vcpu->stat.addrerr_ld_exits;
ret = kvm_mips_callbacks->handle_addr_err_ld(vcpu);
break;
case EXCCODE_SYS:
++vcpu->stat.syscall_exits;
ret = kvm_mips_callbacks->handle_syscall(vcpu);
break;
case EXCCODE_RI:
++vcpu->stat.resvd_inst_exits;
ret = kvm_mips_callbacks->handle_res_inst(vcpu);
break;
case EXCCODE_BP:
++vcpu->stat.break_inst_exits;
ret = kvm_mips_callbacks->handle_break(vcpu);
break;
case EXCCODE_TR:
++vcpu->stat.trap_inst_exits;
ret = kvm_mips_callbacks->handle_trap(vcpu);
break;
case EXCCODE_MSAFPE:
++vcpu->stat.msa_fpe_exits;
ret = kvm_mips_callbacks->handle_msa_fpe(vcpu);
break;
case EXCCODE_FPE:
++vcpu->stat.fpe_exits;
ret = kvm_mips_callbacks->handle_fpe(vcpu);
break;
case EXCCODE_MSADIS:
++vcpu->stat.msa_disabled_exits;
ret = kvm_mips_callbacks->handle_msa_disabled(vcpu);
break;
case EXCCODE_GE:
/* defer exit accounting to handler */
ret = kvm_mips_callbacks->handle_guest_exit(vcpu);
break;
default:
if (cause & CAUSEF_BD)
opc += 1;
inst = 0;
kvm_get_badinstr(opc, vcpu, &inst);
KVM: MIPS: Abstract guest CP0 register access for VZ Abstract the MIPS KVM guest CP0 register access macros into inline functions which are generated by macros. This allows them to be generated differently for VZ, where they will usually need to access the hardware guest CP0 context rather than the saved values in RAM. Accessors for each individual register are generated using these macros: - __BUILD_KVM_*_SW() for registers which are not present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the saved value in RAM regardless of whether VZ is enabled. - __BUILD_KVM_*_HW() for registers which are present in the VZ hardware guest context, so kvm_{read,write}_c0_guest_##name() will access the hardware register when VZ is enabled. These build the underlying accessors using further macros: - __BUILD_KVM_*_SAVED() builds e.g. kvm_{read,write}_sw_gc0_##name() functions for accessing the saved versions of the registers in RAM. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with T&E where registers are always stored in RAM, but are also available with VZ HW registers to allow them to be accessed while saved. - __BUILD_KVM_*_VZ() builds e.g. kvm_{read,write}_vz_gc0_##name() functions for accessing the VZ hardware guest context registers directly. This is used for implementing the common kvm_{read,write}_c0_guest_##name() accessors with VZ. - __BUILD_KVM_*_WRAP() builds wrappers with different names, which allows the common kvm_{read,write}_c0_guest_##name() functions to be implemented using the VZ accessors while still having the SAVED accessors available too. - __BUILD_KVM_SAVE_VZ() builds functions for saving and restoring VZ hardware guest context register state to RAM, improving conciseness of VZ context saving and restoring. Similar macros exist for generating modifiers (set, clear, change), either with a normal unlocked read/modify/write, or using atomic LL/SC sequences. These changes change the types of 32-bit registers to u32 instead of unsigned long, which requires some changes to printk() functions in MIPS KVM. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2017-03-14 18:15:25 +08:00
kvm_err("Exception Code: %d, not yet handled, @ PC: %p, inst: 0x%08x BadVaddr: %#lx Status: %#x\n",
exccode, opc, inst, badvaddr,
kvm_read_c0_guest_status(vcpu->arch.cop0));
kvm_arch_vcpu_dump_regs(vcpu);
run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
ret = RESUME_HOST;
break;
}
local_irq_disable();
if (ret == RESUME_GUEST)
kvm_vz_acquire_htimer(vcpu);
if (er == EMULATE_DONE && !(ret & RESUME_HOST))
kvm_mips_deliver_interrupts(vcpu, cause);
if (!(ret & RESUME_HOST)) {
/* Only check for signals if not already exiting to userspace */
if (signal_pending(current)) {
run->exit_reason = KVM_EXIT_INTR;
ret = (-EINTR << 2) | RESUME_HOST;
++vcpu->stat.signal_exits;
trace_kvm_exit(vcpu, KVM_TRACE_EXIT_SIGNAL);
}
}
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
if (ret == RESUME_GUEST) {
trace_kvm_reenter(vcpu);
/*
* Make sure the read of VCPU requests in vcpu_reenter()
* callback is not reordered ahead of the write to vcpu->mode,
* or we could miss a TLB flush request while the requester sees
* the VCPU as outside of guest mode and not needing an IPI.
*/
smp_store_mb(vcpu->mode, IN_GUEST_MODE);
kvm_mips_callbacks->vcpu_reenter(vcpu);
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
/*
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
* If FPU / MSA are enabled (i.e. the guest's FPU / MSA context
* is live), restore FCR31 / MSACSR.
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
*
* This should be before returning to the guest exception
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
* vector, as it may well cause an [MSA] FP exception if there
* are pending exception bits unmasked. (see
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
* kvm_mips_csr_die_notifier() for how that is handled).
*/
if (kvm_mips_guest_has_fpu(&vcpu->arch) &&
read_c0_status() & ST0_CU1)
__kvm_restore_fcsr(&vcpu->arch);
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
if (kvm_mips_guest_has_msa(&vcpu->arch) &&
read_c0_config5() & MIPS_CONF5_MSAEN)
__kvm_restore_msacsr(&vcpu->arch);
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
}
return ret;
}
kvm/mips: rework guest entry logic In kvm_arch_vcpu_ioctl_run() we use guest_enter_irqoff() and guest_exit_irqoff() directly, with interrupts masked between these. As we don't handle any timer ticks during this window, we will not account time spent within the guest as guest time, which is unfortunate. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); In addition, as guest exits during the "run the vcpu" step are handled by kvm_mips_handle_exit(), a wrapper function is added which ensures that such exists are handled with a sequence: guest_state_exit_irqoff(); < handle the exit > guest_state_enter_irqoff(); This means that exits which stop the vCPU running will have a redundant guest_state_enter_irqoff() .. guest_state_exit_irqoff() sequence, which can be addressed with future rework. Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_mips_enter_exit_vcpu() helper which is marked noinstr. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Message-Id: <20220201132926.3301912-6-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-01 21:29:26 +08:00
int noinstr kvm_mips_handle_exit(struct kvm_vcpu *vcpu)
{
int ret;
guest_state_exit_irqoff();
ret = __kvm_mips_handle_exit(vcpu);
guest_state_enter_irqoff();
return ret;
}
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
/* Enable FPU for guest and restore context */
void kvm_own_fpu(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
unsigned int sr, cfg5;
preempt_disable();
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
sr = kvm_read_c0_guest_status(cop0);
/*
* If MSA state is already live, it is undefined how it interacts with
* FR=0 FPU state, and we don't want to hit reserved instruction
* exceptions trying to save the MSA state later when CU=1 && FR=1, so
* play it safe and save it first.
*/
if (cpu_has_msa && sr & ST0_CU1 && !(sr & ST0_FR) &&
vcpu->arch.aux_inuse & KVM_MIPS_AUX_MSA)
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
kvm_lose_fpu(vcpu);
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
/*
* Enable FPU for guest
* We set FR and FRE according to guest context
*/
change_c0_status(ST0_CU1 | ST0_FR, sr);
if (cpu_has_fre) {
cfg5 = kvm_read_c0_guest_config5(cop0);
change_c0_config5(MIPS_CONF5_FRE, cfg5);
}
enable_fpu_hazard();
/* If guest FPU state not active, restore it now */
if (!(vcpu->arch.aux_inuse & KVM_MIPS_AUX_FPU)) {
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
__kvm_restore_fpu(&vcpu->arch);
vcpu->arch.aux_inuse |= KVM_MIPS_AUX_FPU;
trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE, KVM_TRACE_AUX_FPU);
} else {
trace_kvm_aux(vcpu, KVM_TRACE_AUX_ENABLE, KVM_TRACE_AUX_FPU);
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
}
preempt_enable();
}
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
#ifdef CONFIG_CPU_HAS_MSA
/* Enable MSA for guest and restore context */
void kvm_own_msa(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
unsigned int sr, cfg5;
preempt_disable();
/*
* Enable FPU if enabled in guest, since we're restoring FPU context
* anyway. We set FR and FRE according to guest context.
*/
if (kvm_mips_guest_has_fpu(&vcpu->arch)) {
sr = kvm_read_c0_guest_status(cop0);
/*
* If FR=0 FPU state is already live, it is undefined how it
* interacts with MSA state, so play it safe and save it first.
*/
if (!(sr & ST0_FR) &&
(vcpu->arch.aux_inuse & (KVM_MIPS_AUX_FPU |
KVM_MIPS_AUX_MSA)) == KVM_MIPS_AUX_FPU)
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
kvm_lose_fpu(vcpu);
change_c0_status(ST0_CU1 | ST0_FR, sr);
if (sr & ST0_CU1 && cpu_has_fre) {
cfg5 = kvm_read_c0_guest_config5(cop0);
change_c0_config5(MIPS_CONF5_FRE, cfg5);
}
}
/* Enable MSA for guest */
set_c0_config5(MIPS_CONF5_MSAEN);
enable_fpu_hazard();
switch (vcpu->arch.aux_inuse & (KVM_MIPS_AUX_FPU | KVM_MIPS_AUX_MSA)) {
case KVM_MIPS_AUX_FPU:
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
/*
* Guest FPU state already loaded, only restore upper MSA state
*/
__kvm_restore_msa_upper(&vcpu->arch);
vcpu->arch.aux_inuse |= KVM_MIPS_AUX_MSA;
trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE, KVM_TRACE_AUX_MSA);
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
break;
case 0:
/* Neither FPU or MSA already active, restore full MSA state */
__kvm_restore_msa(&vcpu->arch);
vcpu->arch.aux_inuse |= KVM_MIPS_AUX_MSA;
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
if (kvm_mips_guest_has_fpu(&vcpu->arch))
vcpu->arch.aux_inuse |= KVM_MIPS_AUX_FPU;
trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE,
KVM_TRACE_AUX_FPU_MSA);
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
break;
default:
trace_kvm_aux(vcpu, KVM_TRACE_AUX_ENABLE, KVM_TRACE_AUX_MSA);
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
break;
}
preempt_enable();
}
#endif
/* Drop FPU & MSA without saving it */
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
void kvm_drop_fpu(struct kvm_vcpu *vcpu)
{
preempt_disable();
if (cpu_has_msa && vcpu->arch.aux_inuse & KVM_MIPS_AUX_MSA) {
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
disable_msa();
trace_kvm_aux(vcpu, KVM_TRACE_AUX_DISCARD, KVM_TRACE_AUX_MSA);
vcpu->arch.aux_inuse &= ~KVM_MIPS_AUX_MSA;
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
}
if (vcpu->arch.aux_inuse & KVM_MIPS_AUX_FPU) {
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
clear_c0_status(ST0_CU1 | ST0_FR);
trace_kvm_aux(vcpu, KVM_TRACE_AUX_DISCARD, KVM_TRACE_AUX_FPU);
vcpu->arch.aux_inuse &= ~KVM_MIPS_AUX_FPU;
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
}
preempt_enable();
}
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
/* Save and disable FPU & MSA */
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
void kvm_lose_fpu(struct kvm_vcpu *vcpu)
{
/*
* With T&E, FPU & MSA get disabled in root context (hardware) when it
* is disabled in guest context (software), but the register state in
* the hardware may still be in use.
* This is why we explicitly re-enable the hardware before saving.
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
*/
preempt_disable();
if (cpu_has_msa && vcpu->arch.aux_inuse & KVM_MIPS_AUX_MSA) {
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
__kvm_save_msa(&vcpu->arch);
trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_FPU_MSA);
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
/* Disable MSA & FPU */
disable_msa();
if (vcpu->arch.aux_inuse & KVM_MIPS_AUX_FPU) {
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
clear_c0_status(ST0_CU1 | ST0_FR);
disable_fpu_hazard();
}
vcpu->arch.aux_inuse &= ~(KVM_MIPS_AUX_FPU | KVM_MIPS_AUX_MSA);
} else if (vcpu->arch.aux_inuse & KVM_MIPS_AUX_FPU) {
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
__kvm_save_fpu(&vcpu->arch);
vcpu->arch.aux_inuse &= ~KVM_MIPS_AUX_FPU;
trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_FPU);
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
/* Disable FPU */
clear_c0_status(ST0_CU1 | ST0_FR);
disable_fpu_hazard();
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
}
preempt_enable();
}
/*
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
* Step over a specific ctc1 to FCSR and a specific ctcmsa to MSACSR which are
* used to restore guest FCSR/MSACSR state and may trigger a "harmless" FP/MSAFP
* exception if cause bits are set in the value being written.
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
*/
static int kvm_mips_csr_die_notify(struct notifier_block *self,
unsigned long cmd, void *ptr)
{
struct die_args *args = (struct die_args *)ptr;
struct pt_regs *regs = args->regs;
unsigned long pc;
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
/* Only interested in FPE and MSAFPE */
if (cmd != DIE_FP && cmd != DIE_MSAFP)
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
return NOTIFY_DONE;
/* Return immediately if guest context isn't active */
if (!(current->flags & PF_VCPU))
return NOTIFY_DONE;
/* Should never get here from user mode */
BUG_ON(user_mode(regs));
pc = instruction_pointer(regs);
switch (cmd) {
case DIE_FP:
/* match 2nd instruction in __kvm_restore_fcsr */
if (pc != (unsigned long)&__kvm_restore_fcsr + 4)
return NOTIFY_DONE;
break;
MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2015-03-05 19:43:36 +08:00
case DIE_MSAFP:
/* match 2nd/3rd instruction in __kvm_restore_msacsr */
if (!cpu_has_msa ||
pc < (unsigned long)&__kvm_restore_msacsr + 4 ||
pc > (unsigned long)&__kvm_restore_msacsr + 8)
return NOTIFY_DONE;
break;
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
}
/* Move PC forward a little and continue executing */
instruction_pointer(regs) += 4;
return NOTIFY_STOP;
}
static struct notifier_block kvm_mips_csr_die_notifier = {
.notifier_call = kvm_mips_csr_die_notify,
};
static u32 kvm_default_priority_to_irq[MIPS_EXC_MAX] = {
[MIPS_EXC_INT_TIMER] = C_IRQ5,
[MIPS_EXC_INT_IO_1] = C_IRQ0,
[MIPS_EXC_INT_IPI_1] = C_IRQ1,
[MIPS_EXC_INT_IPI_2] = C_IRQ2,
};
static u32 kvm_loongson3_priority_to_irq[MIPS_EXC_MAX] = {
[MIPS_EXC_INT_TIMER] = C_IRQ5,
[MIPS_EXC_INT_IO_1] = C_IRQ0,
[MIPS_EXC_INT_IO_2] = C_IRQ1,
[MIPS_EXC_INT_IPI_1] = C_IRQ4,
};
u32 *kvm_priority_to_irq = kvm_default_priority_to_irq;
u32 kvm_irq_to_priority(u32 irq)
{
int i;
for (i = MIPS_EXC_INT_TIMER; i < MIPS_EXC_MAX; i++) {
if (kvm_priority_to_irq[i] == (1 << (irq + 8)))
return i;
}
return MIPS_EXC_MAX;
}
static int __init kvm_mips_init(void)
{
int ret;
MIPS: MemoryMapID (MMID) Support Introduce support for using MemoryMapIDs (MMIDs) as an alternative to Address Space IDs (ASIDs). The major difference between the two is that MMIDs are global - ie. an MMID uniquely identifies an address space across all coherent CPUs. In contrast ASIDs are non-global per-CPU IDs, wherein each address space is allocated a separate ASID for each CPU upon which it is used. This global namespace allows a new GINVT instruction be used to globally invalidate TLB entries associated with a particular MMID across all coherent CPUs in the system, removing the need for IPIs to invalidate entries with separate ASIDs on each CPU. The allocation scheme used here is largely borrowed from arm64 (see arch/arm64/mm/context.c). In essence we maintain a bitmap to track available MMIDs, and MMIDs in active use at the time of a rollover to a new MMID version are preserved in the new version. The allocation scheme requires efficient 64 bit atomics in order to perform reasonably, so this support depends upon CONFIG_GENERIC_ATOMIC64=n (ie. currently it will only be included in MIPS64 kernels). The first, and currently only, available CPU with support for MMIDs is the MIPS I6500. This CPU supports 16 bit MMIDs, and so for now we cap our MMIDs to 16 bits wide in order to prevent the bitmap growing to absurd sizes if any future CPU does implement 32 bit MMIDs as the architecture manuals suggest is recommended. When MMIDs are in use we also make use of GINVT instruction which is available due to the global nature of MMIDs. By executing a sequence of GINVT & SYNC 0x14 instructions we can avoid the overhead of an IPI to each remote CPU in many cases. One complication is that GINVT will invalidate wired entries (in all cases apart from type 0, which targets the entire TLB). In order to avoid GINVT invalidating any wired TLB entries we set up, we make sure to create those entries using a reserved MMID (0) that we never associate with any address space. Also of note is that KVM will require further work in order to support MMIDs & GINVT, since KVM is involved in allocating IDs for guests & in configuring the MMU. That work is not part of this patch, so for now when MMIDs are in use KVM is disabled. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-02-02 09:43:28 +08:00
if (cpu_has_mmid) {
pr_warn("KVM does not yet support MMIDs. KVM Disabled\n");
return -EOPNOTSUPP;
}
ret = kvm_mips_entry_setup();
if (ret)
return ret;
ret = kvm_init(NULL, sizeof(struct kvm_vcpu), 0, THIS_MODULE);
if (ret)
return ret;
if (boot_cpu_type() == CPU_LOONGSON64)
kvm_priority_to_irq = kvm_loongson3_priority_to_irq;
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
register_die_notifier(&kvm_mips_csr_die_notifier);
return 0;
}
static void __exit kvm_mips_exit(void)
{
kvm_exit();
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
2014-11-18 22:09:12 +08:00
unregister_die_notifier(&kvm_mips_csr_die_notifier);
}
module_init(kvm_mips_init);
module_exit(kvm_mips_exit);
EXPORT_TRACEPOINT_SYMBOL(kvm_exit);