UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/remoteproc/Kconfig

281 lines
8.3 KiB
Plaintext
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 20:07:45 +08:00
# SPDX-License-Identifier: GPL-2.0-only
drivers/remoteproc: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 10:53:51 +08:00
menu "Remoteproc drivers"
remoteproc: add Kconfig menu Add a dedicated Kconfig menu for the remoteproc drivers, so they don't show up in the main driver menu. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-12-14 19:01:59 +08:00
remoteproc: add framework for controlling remote processors Modern SoCs typically employ a central symmetric multiprocessing (SMP) application processor running Linux, with several other asymmetric multiprocessing (AMP) heterogeneous processors running different instances of operating system, whether Linux or any other flavor of real-time OS. Booting a remote processor in an AMP configuration typically involves: - Loading a firmware which contains the OS image - Allocating and providing it required system resources (e.g. memory) - Programming an IOMMU (when relevant) - Powering on the device This patch introduces a generic framework that allows drivers to do that. In the future, this framework will also include runtime power management and error recovery. Based on (but now quite far from) work done by Fernando Guzman Lugo <fernando.lugo@ti.com>. ELF loader was written by Mark Grosen <mgrosen@ti.com>, based on msm's Peripheral Image Loader (PIL) by Stephen Boyd <sboyd@codeaurora.org>. Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-20 22:52:46 +08:00
config REMOTEPROC
remoteproc: don't allow modular build Remoteproc started using dma_declare_coherent_memory recently, which is a bad idea from drivers, and the maintainers agreed to fix that. But until that is fixed only allow building the driver built in so that we can remove the dma_declare_coherent_memory export and prevent other drivers from "accidentally" using it like remoteproc. Note that the driver would also leak the declared coherent memory on unload if it actually was built as a module at the moment. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-30 14:43:12 +08:00
bool "Support for Remote Processor subsystem"
remoteproc: Add dependency to HAS_DMA Remoteproc relies on HAS_DMA, add this dependency in Kconfig. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-09-14 02:03:58 +08:00
depends on HAS_DMA
remoteproc: perserve resource table data Copy resource table from first to second firmware loading. After firmware is loaded to memory, update the vdevs resource pointer to the resource table kept in device memory. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-by: Ido Yariv <ido@wizery.com> [rebase, terminology and style changes] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-07 19:06:07 +08:00
select CRC32
remoteproc: fix FW_CONFIG typo Fix obvious typo introduced in commit e121aefa7d9f10eee5cf26ed47129237a05d940b ("remoteproc: fix missing CONFIG_FW_LOADER configurations"). Cc: stable@vger.kernel.org Signed-off-by: Robert Tivy <rtivy@ti.com> [cc stable, slight subject change] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-03-29 09:41:43 +08:00
select FW_LOADER
remoteproc: select VIRTIO to avoid build breakage drivers/built-in.o: In function `rproc_virtio_finalize_features': remoteproc_virtio.c:(.text+0x2f9a02): undefined reference to `vring_transport_features' drivers/built-in.o: In function `rproc_virtio_del_vqs': remoteproc_virtio.c:(.text+0x2f9a74): undefined reference to `vring_del_virtqueue' drivers/built-in.o: In function `rproc_virtio_find_vqs': remoteproc_virtio.c:(.text+0x2f9c44): undefined reference to `vring_new_virtqueue' drivers/built-in.o: In function `rproc_add_virtio_dev': (.text+0x2f9e2c): undefined reference to `register_virtio_device' drivers/built-in.o: In function `rproc_vq_interrupt': (.text+0x2f9db7): undefined reference to `vring_interrupt' drivers/built-in.o: In function `rproc_remove_virtio_dev': (.text+0x2f9e9f): undefined reference to `unregister_virtio_device' Cc: stable@vger.kernel.org Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-09-30 16:25:34 +08:00
select VIRTIO
remoteproc: Add remote processor coredump support As the remoteproc framework restarts the remote processor after a fatal event, it's useful to be able to acquire a coredump of the remote processor's state, for post mortem debugging. This patch introduces a mechanism for extracting the memory contents after the remote has stopped and before the restart sequence has begun in the recovery path. The remoteproc framework builds the core dump in memory and use devcoredump to expose this to user space. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> [bjorn: Use vmalloc instead of composing the ELF on the fly] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-06 08:04:17 +08:00
select WANT_DEV_COREDUMP
remoteproc: add some kind of help Top level config option without any kind of help... is kind of strange. Remote processors could also mean some kind of distributed computing... Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-19 17:22:50 +08:00
help
Support for remote processors (such as DSP coprocessors). These
are mainly used on embedded systems.
remoteproc/omap: add a remoteproc driver for OMAP4 Add a remoteproc driver for OMAP4, so we can boot the dual-M3 and and DSP subsystems. Use the omap_device_* API to control the hardware state, and utilize the OMAP mailbox to interrupt the remote processor when a new message is pending (the mailbox payload is used to tell it which virtqueue was the message placed in). Conversely, when an inbound mailbox message arrives, tell the remoteproc core which virtqueue is triggered. Later we will also use the mailbox payload to signal omap-specific events like remote crashes (which will be used to trigger remoteproc recovery) and power management transitions. At that point we will also extend the remoteproc core to support this. Based on (but now quite far from) work done by Fernando Guzman Lugo <fernando.lugo@ti.com> and Hari Kanigeri <h-kanigeri2@ti.com>. Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-21 00:53:35 +08:00
remoteproc: Update Kconfig setup to 'depends on REMOTEPROC' Make REMOTEPROC core a selectable kconfig option, and update remoteproc client drivers to 'depends on' the core. This avoids some nasty Kconfig recursive dependency issues. Also when using menuconfig client drivers will be hidden until the core has been enabled. Documentation/kbuild/kconfig-language.txt: Note: select should be used with care. select will force a symbol to a value without visiting the dependencies. By abusing select you are able to select a symbol FOO even if FOO depends on BAR that is not set. In general use select only for non-visible symbols (no prompts anywhere) and for symbols with no dependencies. That will limit the usefulness but on the other hand avoid the illegal configurations all over. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 17:39:08 +08:00
if REMOTEPROC
remoteproc: Add remoteproc character device interface Add the character device interface into remoteproc framework. This interface can be used in order to boot/shutdown remote subsystems and provides a basic ioctl based interface to implement supplementary functionality. An ioctl call is implemented to enable the shutdown on release feature which will allow remote processors to be shutdown when the controlling userspace application crashes or hangs. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Link: https://lore.kernel.org/r/1596044401-22083-2-git-send-email-sidgup@codeaurora.org [bjorn: s/int32_t/s32/ per checkpatch] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-30 01:40:00 +08:00
config REMOTEPROC_CDEV
bool "Remoteproc character device interface"
help
Say y here to have a character device interface for the remoteproc
framework. Userspace can boot/shutdown remote processors through
this interface.
It's safe to say N if you don't want to use this interface.
remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver Provide a basic driver to control Cortex M4 co-processor found on NXP i.MX7D and i.MX6SX. Currently it is able to resolve addresses between M4 and main CPU, start and stop the co-processor. Other functionality is not provided or test. This driver was tested on NXP i.MX7D and expected to work on i.MX6SX as well. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-17 15:15:26 +08:00
config IMX_REMOTEPROC
tristate "IMX6/7 remoteproc support"
remoteproc: imx: Broaden the Kconfig selection logic Besides i.MX6SX and i.MX7D, there are other i.MX devices that contain Cortex M4 and could make use of the imx remoteproc driver, such as i.MX7ULP, i.MX8M, etc. Instead of adding new SoC entries in the Kconfig logic, make it broader by using the more generic ARCH_MXC, which encompasses all the 32-bit and 64-bit i.MX devices. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-04 07:46:27 +08:00
depends on ARCH_MXC
remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver Provide a basic driver to control Cortex M4 co-processor found on NXP i.MX7D and i.MX6SX. Currently it is able to resolve addresses between M4 and main CPU, start and stop the co-processor. Other functionality is not provided or test. This driver was tested on NXP i.MX7D and expected to work on i.MX6SX as well. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-17 15:15:26 +08:00
help
Say y here to support iMX's remote processors (Cortex M4
on iMX7D) via the remote processor framework.
It's safe to say N here.
remoteproc: ingenic: Added remoteproc driver This driver is used to boot, communicate with and load firmwares to the MIPS co-processor found in the VPU hardware of the JZ47xx SoCs from Ingenic. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200515104340.10473-4-paul@crapouillou.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-15 18:43:39 +08:00
config INGENIC_VPU_RPROC
tristate "Ingenic JZ47xx VPU remoteproc support"
depends on MIPS || COMPILE_TEST
help
Say y or m here to support the VPU in the JZ47xx SoCs from Ingenic.
This can be either built-in or a loadable module.
If unsure say N.
remoteproc/mediatek: add SCP support for mt8183 Provide a basic driver to control Cortex M4 co-processor Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Link: https://lore.kernel.org/r/20191112110330.179649-3-pihsun@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-12 19:03:25 +08:00
config MTK_SCP
tristate "Mediatek SCP support"
depends on ARCH_MEDIATEK
rpmsg: add rpmsg support for mt8183 SCP. Add a simple rpmsg support for mt8183 SCP, that use IPI / IPC directly. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Link: https://lore.kernel.org/r/20191112110330.179649-4-pihsun@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-12 19:03:26 +08:00
select RPMSG_MTK_SCP
remoteproc/mediatek: add SCP support for mt8183 Provide a basic driver to control Cortex M4 co-processor Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Link: https://lore.kernel.org/r/20191112110330.179649-3-pihsun@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-12 19:03:25 +08:00
help
Say y here to support Mediatek's System Companion Processor (SCP) via
the remote processor framework.
It's safe to say N here.
remoteproc/omap: add a remoteproc driver for OMAP4 Add a remoteproc driver for OMAP4, so we can boot the dual-M3 and and DSP subsystems. Use the omap_device_* API to control the hardware state, and utilize the OMAP mailbox to interrupt the remote processor when a new message is pending (the mailbox payload is used to tell it which virtqueue was the message placed in). Conversely, when an inbound mailbox message arrives, tell the remoteproc core which virtqueue is triggered. Later we will also use the mailbox payload to signal omap-specific events like remote crashes (which will be used to trigger remoteproc recovery) and power management transitions. At that point we will also extend the remoteproc core to support this. Based on (but now quite far from) work done by Fernando Guzman Lugo <fernando.lugo@ti.com> and Hari Kanigeri <h-kanigeri2@ti.com>. Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-21 00:53:35 +08:00
config OMAP_REMOTEPROC
tristate "OMAP remoteproc support"
remoteproc/omap: Add support for DRA7xx remote processors DRA7xx/AM57xx SoCs have two IPU and up to two DSP processor subsystems for offloading different computation algorithms. The IPU processor subsystem contains dual-core ARM Cortex-M4 processors, and is very similar to those on OMAP5. The DSP processor subsystem is based on the TI's standard TMS320C66x DSP CorePac core. Support has been added to the OMAP remoteproc driver through new DRA7xx specific compatibles for properly probing and booting all the different processor subsystem instances on DRA7xx/AM57xx SoCs - IPU1, IPU2, DSP1 & DSP2. A build dependency with SOC_DRA7XX is added to enable the driver to be built in DRA7xx-only configuration. The DSP boot address programming needed enhancement for DRA7xx as the boot register fields are different on DRA7 compared to OMAP4 and OMAP5 SoCs. The register on DRA7xx contains additional fields within the register and the boot address bit-field is right-shifted by 10 bits. The internal memory parsing logic has also been updated to compute the device addresses for the L2 RAM for DSP devices using relative addressing logic, and to parse two additional RAMs at L1 level - L1P and L1D. This allows the remoteproc driver to support loading into these regions for a small subset of firmware images requiring as such. The most common usage would be to use the L1 programmable RAMs as L1 Caches. The firmware lookup logic also has to be adjusted for DRA7xx as there are (can be) more than one instance of both the IPU and DSP remote processors for the first time in OMAP4+ SoCs. Signed-off-by: Suman Anna <s-anna@ti.com> [t-kristo@ti.com: moved address translation quirks to pdata] Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200324110035.29907-8-t-kristo@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-24 19:00:27 +08:00
depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
remoteproc/omap: two Kconfig fixes 1. Depend on OMAP_IOMMU instead of selecting it, to fix an unmet direct dependency of it (and its imminent build error) 2. Set default to 'no' (achieved implicitly by dropping the 'default' line) Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Grosen <mgrosen@ti.com> Cc: Suman Anna <s-anna@ti.com> Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Cc: Rob Clark <rob@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: Russell King <linux@arm.linux.org.uk>
2012-02-28 19:04:33 +08:00
depends on OMAP_IOMMU
mailbox/omap: move the OMAP mailbox framework to drivers The mailbox hardware (in OMAP) uses a queued mailbox interrupt mechanism that provides a communication channel between processors through a set of registers and their associated interrupt signals by sending and receiving messages. The OMAP mailbox framework/driver code is moved to be under drivers/mailbox, in preparation for adapting to a common mailbox driver framework. This allows the build for OMAP mailbox to be enabled (it was disabled during the multi-platform support). As part of the migration from plat and mach code: - Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers. - mailbox.h under plat-omap/plat/include has been split into a public and private header files. The public header has only the API related functions and types. - The module name mailbox.ko from plat-omap is changed to omap-mailbox.ko - The module name mailbox_mach.ko from mach-omapX is changed as mailbox_omap1.ko for OMAP1 mailbox_omap2.ko for OMAP2+ Cc: Tony Lindgren <tony@atomide.com> [gregkh@linuxfoundation.org: ack for staging part] Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com> Signed-off-by: Suman Anna <s-anna@ti.com>
2013-03-13 06:55:29 +08:00
select MAILBOX
select OMAP2PLUS_MBOX
remoteproc/omap: add a remoteproc driver for OMAP4 Add a remoteproc driver for OMAP4, so we can boot the dual-M3 and and DSP subsystems. Use the omap_device_* API to control the hardware state, and utilize the OMAP mailbox to interrupt the remote processor when a new message is pending (the mailbox payload is used to tell it which virtqueue was the message placed in). Conversely, when an inbound mailbox message arrives, tell the remoteproc core which virtqueue is triggered. Later we will also use the mailbox payload to signal omap-specific events like remote crashes (which will be used to trigger remoteproc recovery) and power management transitions. At that point we will also extend the remoteproc core to support this. Based on (but now quite far from) work done by Fernando Guzman Lugo <fernando.lugo@ti.com> and Hari Kanigeri <h-kanigeri2@ti.com>. Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-21 00:53:35 +08:00
help
Say y here to support OMAP's remote processors (dual M3
and DSP on OMAP4) via the remote processor framework.
Currently only supported on OMAP4.
remoteproc: add some kind of help Top level config option without any kind of help... is kind of strange. Remote processors could also mean some kind of distributed computing... Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-19 17:22:50 +08:00
Usually you want to say Y here, in order to enable multimedia
remoteproc/omap: add a remoteproc driver for OMAP4 Add a remoteproc driver for OMAP4, so we can boot the dual-M3 and and DSP subsystems. Use the omap_device_* API to control the hardware state, and utilize the OMAP mailbox to interrupt the remote processor when a new message is pending (the mailbox payload is used to tell it which virtqueue was the message placed in). Conversely, when an inbound mailbox message arrives, tell the remoteproc core which virtqueue is triggered. Later we will also use the mailbox payload to signal omap-specific events like remote crashes (which will be used to trigger remoteproc recovery) and power management transitions. At that point we will also extend the remoteproc core to support this. Based on (but now quite far from) work done by Fernando Guzman Lugo <fernando.lugo@ti.com> and Hari Kanigeri <h-kanigeri2@ti.com>. Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-21 00:53:35 +08:00
use-cases to run on your platform (multimedia codecs are
offloaded to remote DSP processors using this framework).
remoteproc: add some kind of help Top level config option without any kind of help... is kind of strange. Remote processors could also mean some kind of distributed computing... Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-19 17:22:50 +08:00
It's safe to say N here if you're not interested in multimedia
remoteproc/omap: add a remoteproc driver for OMAP4 Add a remoteproc driver for OMAP4, so we can boot the dual-M3 and and DSP subsystems. Use the omap_device_* API to control the hardware state, and utilize the OMAP mailbox to interrupt the remote processor when a new message is pending (the mailbox payload is used to tell it which virtqueue was the message placed in). Conversely, when an inbound mailbox message arrives, tell the remoteproc core which virtqueue is triggered. Later we will also use the mailbox payload to signal omap-specific events like remote crashes (which will be used to trigger remoteproc recovery) and power management transitions. At that point we will also extend the remoteproc core to support this. Based on (but now quite far from) work done by Fernando Guzman Lugo <fernando.lugo@ti.com> and Hari Kanigeri <h-kanigeri2@ti.com>. Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>
2011-10-21 00:53:35 +08:00
offloading or just want a bare minimum kernel.
remoteproc: add Kconfig menu Add a dedicated Kconfig menu for the remoteproc drivers, so they don't show up in the main driver menu. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-12-14 19:01:59 +08:00
remoteproc/omap: Add watchdog functionality for remote processors Remote processors can be stuck in a loop, and may not be recoverable if they do not have a built-in watchdog. The watchdog implementation for OMAP remote processors uses external gptimers that can be used to interrupt both the Linux host as well as the remote processor. Each remote processor is responsible for refreshing the timer during normal behavior - during OS task scheduling or entering the idle loop properly. During a watchdog condition (executing a tight loop causing no scheduling), the host processor gets interrupts and schedules a recovery for the corresponding remote processor. The remote processor may also get interrupted to be able to print a back trace. A menuconfig option has also been added to enable/disable the Watchdog functionality, with the default as disabled. Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Andrew F. Davis <afd@ti.com> Link: https://lore.kernel.org/r/20200324110035.29907-15-t-kristo@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-03-24 19:00:34 +08:00
config OMAP_REMOTEPROC_WATCHDOG
bool "OMAP remoteproc watchdog timer"
depends on OMAP_REMOTEPROC
default n
help
Say Y here to enable watchdog timer for remote processors.
This option controls the watchdog functionality for the remote
processors in OMAP. Dedicated OMAP DMTimers are used by the remote
processors and triggers the timer interrupt upon a watchdog
detection.
remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3 Add a remoteproc driver to load the firmware and boot a small Wakeup M3 processor present on TI AM33xx and AM43xx SoCs. This Wakeup M3 remote processor is an integrated Cortex M3 that allows the SoC to enter the lowest possible power state by taking control from the MPU after it has gone into its own low power state and shutting off any additional peripherals. The Wakeup M3 processor has two internal memory regions - 16 kB of unified instruction memory called UMEM used to store executable code, and 8 kB of data memory called DMEM used for all data sections. The Wakeup M3 processor executes its code entirely from within the UMEM and uses the DMEM for any data. It does not use any external memory or any other external resources. The device address view has the UMEM at address 0x0 and DMEM at address 0x80000, and these are computed automatically within the driver based on relative address calculation from the corresponding device tree IOMEM resources. These device addresses are used to aid the core remoteproc ELF loader code to properly translate and load the firmware segments through the .rproc_da_to_va ops. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-05-23 04:45:30 +08:00
config WKUP_M3_RPROC
tristate "AMx3xx Wakeup M3 remoteproc support"
depends on SOC_AM33XX || SOC_AM43XX
help
Say y here to support Wakeup M3 remote processor on TI AM33xx
and AM43xx family of SoCs.
Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
firmware onto these remote processors.
If unsure say N.
remoteproc/davinci: add a remoteproc driver for OMAP-L13x DSP Adding a new remoteproc driver for OMAP-L13x DSP Signed-off-by: Robert Tivy <rtivy@ti.com> [removed 'EXPERIMENTAL' and fixed some indentation issues] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-10 05:20:21 +08:00
config DA8XX_REMOTEPROC
tristate "DA8xx/OMAP-L13x remoteproc support"
depends on ARCH_DAVINCI_DA8XX
remoteproc/davinci: Update Kconfig to depend on DMA_CMA The davinci remoteproc driver requires a CMA pool for allocating memory for virtio vrings/buffers and other sections of the firmware image. The allocations are done using the DMA API. The CMA option is currently selected automatically on systems with MMU when davinci remoteproc is enabled, switch this to a saner depends on dependency convention. The dependency is also updated to use the DMA_CMA kconfig symbol that is used for CMA allocations using the DMA API, the CMA dependency is inherited implicitly. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-05-19 06:08:59 +08:00
depends on DMA_CMA
remoteproc/davinci: add a remoteproc driver for OMAP-L13x DSP Adding a new remoteproc driver for OMAP-L13x DSP Signed-off-by: Robert Tivy <rtivy@ti.com> [removed 'EXPERIMENTAL' and fixed some indentation issues] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-10 05:20:21 +08:00
help
Say y here to support DA8xx/OMAP-L13x remote processors via the
remote processor framework.
You want to say y here in order to enable AMP
use-cases to run on your platform (multimedia codecs are
offloaded to remote DSP processors using this framework).
This module controls the name of the firmware file that gets
loaded on the DSP. This file must reside in the /lib/firmware
directory. It can be specified via the module parameter
da8xx_fw_name=<filename>, and if not specified will default to
"rproc-dsp-fw".
It's safe to say n here if you're not interested in multimedia
offloading.
remoteproc/keystone: Add a remoteproc driver for Keystone 2 DSPs The Texas Instrument's Keystone 2 family of SoCs has 1 or more TMS320C66x DSP Core Subsystems (C66x CorePacs). Each subsystem has a C66x Fixed/Floating-Point DSP Core, with 32KB of L1P and L1D SRAMs, that can be configured and partitioned as either RAM and/or Cache, and 1 MB of L2 SRAM. The CorePac also includes an Internal DMA (IDMA), External Memory Controller (EMC), Extended Memory Controller (XMC) with a Memory Protection and Address Extension (MPAX) unit, a Bandwidth Management (BWM) unit, an Interrupt Controller (INTC) and a Powerdown Controller (PDC). A new remoteproc module is added to perform the device management of these DSP devices. The driver expects the firmware names to be of the form "keystone-dsp<X>-fw", where X is the corresponding DSP number, and uses the standard remoteproc core ELF loader. The support is limited to images only using the DSP internal memories at the moment. This remoteproc driver is also designed to work with virtio, and uses the IPC Generation registers for performing the virtio signalling and getting notified of exceptions. The driver currently supports the 66AK2H/66AK2K, 66AK2L and 66AK2E SoCs. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Sam Nelson <sam.nelson@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-06-14 07:45:12 +08:00
config KEYSTONE_REMOTEPROC
tristate "Keystone Remoteproc support"
depends on ARCH_KEYSTONE
help
Say Y here here to support Keystone remote processors (DSP)
via the remote processor framework.
It's safe to say N here if you're not interested in the Keystone
DSPs or just want to use a bare minimum kernel.
remoteproc: qcom: Introduce helper to store pil info in IMEM A region in IMEM is used to communicate load addresses of remoteproc to post mortem debug tools. Implement a helper function that can be used to store this information in order to enable these tools to process collected ramdumps. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200622191942.255460-3-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23 03:19:39 +08:00
config QCOM_PIL_INFO
tristate
remoteproc: qcom: Rename Hexagon v5 PAS driver The Hexagon v5 ADSP driver is used for more than only the ADSP and there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to qcom_q6v5_pas in order to better suite this. Cc: Rohit kumar <rohitkr@codeaurora.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-25 07:45:25 +08:00
config QCOM_RPROC_COMMON
tristate
config QCOM_Q6V5_COMMON
tristate
depends on ARCH_QCOM
depends on QCOM_SMEM
remoteproc: qcom: Introduce Non-PAS ADSP PIL driver This adds Non PAS ADSP PIL driver for Qualcomm Technologies Inc SoCs. Added initial support for SDM845 with ADSP bootup and shutdown operation handled from Application Processor SubSystem(APSS). Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Tested-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> [bjorn: Renamed driver and Kconfig from qcom_adsp_pil to qcom_q6v5_adsp] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-24 19:07:50 +08:00
config QCOM_Q6V5_ADSP
tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader"
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
depends on QCOM_SYSMON || QCOM_SYSMON=n
select MFD_SYSCON
remoteproc: qcom: Update PIL relocation info on load Update the PIL relocation information in IMEM with information about where the firmware for various remoteprocs are loaded. Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200622191942.255460-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23 03:19:40 +08:00
select QCOM_PIL_INFO
remoteproc: qcom: Introduce Non-PAS ADSP PIL driver This adds Non PAS ADSP PIL driver for Qualcomm Technologies Inc SoCs. Added initial support for SDM845 with ADSP bootup and shutdown operation handled from Application Processor SubSystem(APSS). Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Tested-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> [bjorn: Renamed driver and Kconfig from qcom_adsp_pil to qcom_q6v5_adsp] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-24 19:07:50 +08:00
select QCOM_MDT_LOADER
select QCOM_Q6V5_COMMON
select QCOM_RPROC_COMMON
help
Say y here to support the Peripheral Image Loader
for the Qualcomm Technology Inc. ADSP remote processors.
remoteproc: qcom: Rename Hexagon v5 modem driver The qcom_q6v5_pil implements support for the self-authenticating modem subsystem. With the introduction of other q6v5 based non-TZ based remoteproc driver the current name is cause for confusion, so rename it to be more specific. No functional change. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-25 07:45:26 +08:00
config QCOM_Q6V5_MSS
tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
remoteproc: Introduce Qualcomm ADSP PIL The Qualcomm ADSP Peripheral Image Loader is used on a variety of different Qualcomm platforms for loading firmware into and controlling the Hexagon based ADSP. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-23 13:57:44 +08:00
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
soc: qcom: smd: Remove standalone driver Remove the standalone SMD implementation as we have transitioned the client drivers to use the RPMSG based one. Also remove all dependencies on QCOM_SMD from Kconfig files, in order to keep them selectable in the absence of the removed symbol. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 13:26:34 +08:00
depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
remoteproc: qcom: adsp: Allow defining GLINK edge Introduce the GLINK subdev, which allows the definition of a GLINK edge as child of a remoteproc. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-30 07:13:35 +08:00
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
remoteproc: qcom: Introduce sysmon The sysmon client communicates either via a dedicated SMD/GLINK channel or via QMI encoded messages over IPCROUTER with remote processors in order to perform graceful shutdown and inform about other remote processors shutting down. Acked-By: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-28 12:51:38 +08:00
depends on QCOM_SYSMON || QCOM_SYSMON=n
remoteproc: Introduce Qualcomm ADSP PIL The Qualcomm ADSP Peripheral Image Loader is used on a variety of different Qualcomm platforms for loading firmware into and controlling the Hexagon based ADSP. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-23 13:57:44 +08:00
select MFD_SYSCON
remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER If QCOM_Q6V5_MSS is set but QCOM_MDT_LOADER is not, building will fails: drivers/remoteproc/qcom_q6v5_mss.o: In function `q6v5_start': qcom_q6v5_mss.c:(.text+0x3260): undefined reference to `qcom_mdt_read_metadata' Add QCOM_MDT_LOADER dependency for QCOM_Q6V5_MSS. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: f04b91383456 ("remoteproc: qcom: q6v5-mss: Support loading non-split images") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-04 14:46:49 +08:00
select QCOM_MDT_LOADER
remoteproc: qcom: Update PIL relocation info on load Update the PIL relocation information in IMEM with information about where the firmware for various remoteprocs are loaded. Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200622191942.255460-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23 03:19:40 +08:00
select QCOM_PIL_INFO
remoteproc: qcom: adsp: Use common q6v5 helpers Migrate the Hexagon V5 PAS (ADSP) driver to using the newly extracted helper functions. The use of the handover callback does introduce latent disabling of proxy resources. But apart from this there should be no change in functionality. Reviewed-by: Rohit kumar <rohitkr@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-05 04:30:37 +08:00
select QCOM_Q6V5_COMMON
remoteproc: qcom: Extract non-mdt related helper In preparation for moving the mdt loader out of remoteproc let's move the somewhat unrelated resource table dummy helper to a Qualcomm "common" file. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-27 18:28:32 +08:00
select QCOM_RPROC_COMMON
remoteproc: qcom_adsp_pil: select qcom_scm The adsp-pil driver relies on SCM and causes a build error without it: ERROR: "qcom_scm_pas_supported" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_is_available" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_auth_and_reset" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_shutdown" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_mem_setup" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_init_image" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! This adds a 'select', as SCM is a silent Kconfig symbol that gets enabled implicitly by all its users. Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-09 19:47:02 +08:00
select QCOM_SCM
remoteproc: Introduce Qualcomm ADSP PIL The Qualcomm ADSP Peripheral Image Loader is used on a variety of different Qualcomm platforms for loading firmware into and controlling the Hexagon based ADSP. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-23 13:57:44 +08:00
help
remoteproc: qcom: Rename Hexagon v5 modem driver The qcom_q6v5_pil implements support for the self-authenticating modem subsystem. With the introduction of other q6v5 based non-TZ based remoteproc driver the current name is cause for confusion, so rename it to be more specific. No functional change. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-25 07:45:26 +08:00
Say y here to support the Qualcomm self-authenticating modem
subsystem based on Hexagon V5.
remoteproc: q6v5: Extract common resource handling Shared between all Hexagon V5 based remoteprocs is the handling of the 5 interrupts and the SMP2P stop request, so break this out into a separate function in order to allow these drivers to be cleaned up. Reviewed-by: Rohit kumar <rohitkr@codeaurora.org> Tested-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-05 04:30:36 +08:00
remoteproc: qcom: Rename Hexagon v5 modem driver The qcom_q6v5_pil implements support for the self-authenticating modem subsystem. With the introduction of other q6v5 based non-TZ based remoteproc driver the current name is cause for confusion, so rename it to be more specific. No functional change. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-25 07:45:26 +08:00
config QCOM_Q6V5_PAS
tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
remoteproc: qcom: Driver for the self-authenticating Hexagon v5 This driver supports bringing the Q6V5 out of reset, load and drive the self-authenticating boot loader and use this to load the mdt and subsequent bXX files. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-21 05:28:41 +08:00
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
soc: qcom: smd: Remove standalone driver Remove the standalone SMD implementation as we have transitioned the client drivers to use the RPMSG based one. Also remove all dependencies on QCOM_SMD from Kconfig files, in order to keep them selectable in the absence of the removed symbol. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 13:26:34 +08:00
depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
remoteproc: qcom: fix RPMSG_QCOM_GLINK_SMEM dependencies When RPMSG_QCOM_GLINK_SMEM=m and one driver causes the qcom_common.c file to be compiled as built-in, we get a link error: drivers/remoteproc/qcom_common.o: In function `glink_subdev_remove': qcom_common.c:(.text+0x130): undefined reference to `qcom_glink_smem_unregister' qcom_common.c:(.text+0x130): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `qcom_glink_smem_unregister' drivers/remoteproc/qcom_common.o: In function `glink_subdev_probe': qcom_common.c:(.text+0x160): undefined reference to `qcom_glink_smem_register' qcom_common.c:(.text+0x160): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `qcom_glink_smem_register' Out of the three PIL driver instances, QCOM_ADSP_PIL already has a Kconfig dependency to prevent this from happening, but the other two do not. This adds the same dependency there. Fixes: eea07023e6d9 ("remoteproc: qcom: adsp: Allow defining GLINK edge") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-09-12 03:54:17 +08:00
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
remoteproc: qcom: Introduce sysmon The sysmon client communicates either via a dedicated SMD/GLINK channel or via QMI encoded messages over IPCROUTER with remote processors in order to perform graceful shutdown and inform about other remote processors shutting down. Acked-By: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-28 12:51:38 +08:00
depends on QCOM_SYSMON || QCOM_SYSMON=n
remoteproc: qcom: Driver for the self-authenticating Hexagon v5 This driver supports bringing the Q6V5 out of reset, load and drive the self-authenticating boot loader and use this to load the mdt and subsequent bXX files. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-21 05:28:41 +08:00
select MFD_SYSCON
remoteproc: qcom: Update PIL relocation info on load Update the PIL relocation information in IMEM with information about where the firmware for various remoteprocs are loaded. Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200622191942.255460-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23 03:19:40 +08:00
select QCOM_PIL_INFO
remoteproc: qcom: Rename Hexagon v5 modem driver The qcom_q6v5_pil implements support for the self-authenticating modem subsystem. With the introduction of other q6v5 based non-TZ based remoteproc driver the current name is cause for confusion, so rename it to be more specific. No functional change. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-25 07:45:26 +08:00
select QCOM_MDT_LOADER
remoteproc: qcom: q6v5-pil: Use common q6v5 helpers Migrate the MSS remoteproc driver to use the newly extracted helper functions. Reviewed-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-05 04:30:38 +08:00
select QCOM_Q6V5_COMMON
remoteproc: qcom: Extract non-mdt related helper In preparation for moving the mdt loader out of remoteproc let's move the somewhat unrelated resource table dummy helper to a Qualcomm "common" file. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-27 18:28:32 +08:00
select QCOM_RPROC_COMMON
remoteproc: qcom_adsp_pil: select qcom_scm The adsp-pil driver relies on SCM and causes a build error without it: ERROR: "qcom_scm_pas_supported" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_is_available" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_auth_and_reset" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_shutdown" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_mem_setup" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_scm_pas_init_image" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! This adds a 'select', as SCM is a silent Kconfig symbol that gets enabled implicitly by all its users. Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-09 19:47:02 +08:00
select QCOM_SCM
remoteproc: qcom: Driver for the self-authenticating Hexagon v5 This driver supports bringing the Q6V5 out of reset, load and drive the self-authenticating boot loader and use this to load the mdt and subsequent bXX files. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-21 05:28:41 +08:00
help
remoteproc: qcom: Rename Hexagon v5 PAS driver The Hexagon v5 ADSP driver is used for more than only the ADSP and there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to qcom_q6v5_pas in order to better suite this. Cc: Rohit kumar <rohitkr@codeaurora.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-25 07:45:25 +08:00
Say y here to support the TrustZone based Peripherial Image Loader
for the Qualcomm Hexagon v5 based remote processors. This is commonly
used to control subsystems such as ADSP, Compute and Sensor.
remoteproc: qcom: Driver for the self-authenticating Hexagon v5 This driver supports bringing the Q6V5 out of reset, load and drive the self-authenticating boot loader and use this to load the mdt and subsequent bXX files. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-21 05:28:41 +08:00
remoteproc: qcom: Introduce Hexagon V5 based WCSS driver IPQ8074 has an integrated Hexagon dsp core q6v5 and a wireless lan (Lithium) IP. An mdt type single image format is used for the firmware. So the mdt_load function can be directly used to load the firmware. Also add the relevant resets required for this core. Acked-by: Rob Herring <robh@kernel.org> (bindings) Signed-off-by: Sricharan R <sricharan@codeaurora.org> [bjorn: Rewrote as a separate driver, intead of extending q6v5_pil.c] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-08 01:27:11 +08:00
config QCOM_Q6V5_WCSS
tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
remoteproc: qcom: fix Q6V5_WCSS dependencies A new driver got added that depends on QCOM_SMD and fails to link as built-in with CONFIG_QCOM_SMD=m: drivers/remoteproc/qcom_common.o: In function `smd_subdev_stop': qcom_common.c:(.text+0x674): undefined reference to `qcom_smd_unregister_edge' drivers/remoteproc/qcom_common.o: In function `smd_subdev_start': qcom_common.c:(.text+0x700): undefined reference to `qcom_smd_register_edge' We've fixed the same thing several times before, so use the same dependency here. Fixes: 3a3d4163e0bf ("remoteproc: qcom: Introduce Hexagon V5 based WCSS driver") Acked-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-18 19:16:26 +08:00
depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
remoteproc: qcom: Introduce Hexagon V5 based WCSS driver IPQ8074 has an integrated Hexagon dsp core q6v5 and a wireless lan (Lithium) IP. An mdt type single image format is used for the firmware. So the mdt_load function can be directly used to load the firmware. Also add the relevant resets required for this core. Acked-by: Rob Herring <robh@kernel.org> (bindings) Signed-off-by: Sricharan R <sricharan@codeaurora.org> [bjorn: Rewrote as a separate driver, intead of extending q6v5_pil.c] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-08 01:27:11 +08:00
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
depends on QCOM_SYSMON || QCOM_SYSMON=n
select MFD_SYSCON
select QCOM_MDT_LOADER
remoteproc: qcom: Update PIL relocation info on load Update the PIL relocation information in IMEM with information about where the firmware for various remoteprocs are loaded. Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200622191942.255460-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23 03:19:40 +08:00
select QCOM_PIL_INFO
remoteproc: qcom: Introduce Hexagon V5 based WCSS driver IPQ8074 has an integrated Hexagon dsp core q6v5 and a wireless lan (Lithium) IP. An mdt type single image format is used for the firmware. So the mdt_load function can be directly used to load the firmware. Also add the relevant resets required for this core. Acked-by: Rob Herring <robh@kernel.org> (bindings) Signed-off-by: Sricharan R <sricharan@codeaurora.org> [bjorn: Rewrote as a separate driver, intead of extending q6v5_pil.c] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-08 01:27:11 +08:00
select QCOM_Q6V5_COMMON
select QCOM_RPROC_COMMON
select QCOM_SCM
help
Say y here to support the Qualcomm Peripheral Image Loader for the
Hexagon V5 based WCSS remote processors.
remoteproc: qcom: Introduce sysmon The sysmon client communicates either via a dedicated SMD/GLINK channel or via QMI encoded messages over IPCROUTER with remote processors in order to perform graceful shutdown and inform about other remote processors shutting down. Acked-By: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-28 12:51:38 +08:00
config QCOM_SYSMON
tristate "Qualcomm sysmon driver"
depends on RPMSG
depends on ARCH_QCOM
soc: qcom: qmi: add CONFIG_NET dependency Access to the socket API and the root network namespace is only available when networking is enabled: ERROR: "kernel_sendmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "sock_release" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "sock_create_kern" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "kernel_getsockname" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "init_net" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "kernel_recvmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined! Adding a dependency on CONFIG_NET lets us build it in all randconfig builds. Fixes: 9b8a11e82615 ("soc: qcom: Introduce QMI encoder/decoder") Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-22 23:57:38 +08:00
depends on NET
remoteproc: qcom: Introduce sysmon The sysmon client communicates either via a dedicated SMD/GLINK channel or via QMI encoded messages over IPCROUTER with remote processors in order to perform graceful shutdown and inform about other remote processors shutting down. Acked-By: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-28 12:51:38 +08:00
select QCOM_QMI_HELPERS
help
The sysmon driver implements a sysmon QMI client and a handler for
the sys_mon SMD and GLINK channel, which are used for graceful
shutdown, retrieving failure information and propagating information
about other subsystems being shut down.
Say y here if your system runs firmware on any other subsystems, e.g.
modem or DSP.
remoteproc: qcom: Introduce WCNSS peripheral image loader This introduces the peripheral image loader, for loading WCNSS firmware and boot the core on e.g. MSM8974. The firmware is verified and booted with the help of the Peripheral Authentication System (PAS) in TrustZone. Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-13 09:18:59 +08:00
config QCOM_WCNSS_PIL
tristate "Qualcomm WCNSS Peripheral Image Loader"
depends on OF && ARCH_QCOM
soc: qcom: smd: Remove standalone driver Remove the standalone SMD implementation as we have transitioned the client drivers to use the RPMSG based one. Also remove all dependencies on QCOM_SMD from Kconfig files, in order to keep them selectable in the absence of the removed symbol. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 13:26:34 +08:00
depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
remoteproc: qcom: fix RPMSG_QCOM_GLINK_SMEM dependencies When RPMSG_QCOM_GLINK_SMEM=m and one driver causes the qcom_common.c file to be compiled as built-in, we get a link error: drivers/remoteproc/qcom_common.o: In function `glink_subdev_remove': qcom_common.c:(.text+0x130): undefined reference to `qcom_glink_smem_unregister' qcom_common.c:(.text+0x130): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `qcom_glink_smem_unregister' drivers/remoteproc/qcom_common.o: In function `glink_subdev_probe': qcom_common.c:(.text+0x160): undefined reference to `qcom_glink_smem_register' qcom_common.c:(.text+0x160): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `qcom_glink_smem_register' Out of the three PIL driver instances, QCOM_ADSP_PIL already has a Kconfig dependency to prevent this from happening, but the other two do not. This adds the same dependency there. Fixes: eea07023e6d9 ("remoteproc: qcom: adsp: Allow defining GLINK edge") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-09-12 03:54:17 +08:00
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
remoteproc: qcom: Introduce WCNSS peripheral image loader This introduces the peripheral image loader, for loading WCNSS firmware and boot the core on e.g. MSM8974. The firmware is verified and booted with the help of the Peripheral Authentication System (PAS) in TrustZone. Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-13 09:18:59 +08:00
depends on QCOM_SMEM
remoteproc: qcom: Introduce sysmon The sysmon client communicates either via a dedicated SMD/GLINK channel or via QMI encoded messages over IPCROUTER with remote processors in order to perform graceful shutdown and inform about other remote processors shutting down. Acked-By: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-28 12:51:38 +08:00
depends on QCOM_SYSMON || QCOM_SYSMON=n
remoteproc: qcom: Introduce WCNSS peripheral image loader This introduces the peripheral image loader, for loading WCNSS firmware and boot the core on e.g. MSM8974. The firmware is verified and booted with the help of the Peripheral Authentication System (PAS) in TrustZone. Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-13 09:18:59 +08:00
select QCOM_MDT_LOADER
remoteproc: qcom: Update PIL relocation info on load Update the PIL relocation information in IMEM with information about where the firmware for various remoteprocs are loaded. Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200622191942.255460-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23 03:19:40 +08:00
select QCOM_PIL_INFO
remoteproc: qcom: Extract non-mdt related helper In preparation for moving the mdt loader out of remoteproc let's move the somewhat unrelated resource table dummy helper to a Qualcomm "common" file. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-27 18:28:32 +08:00
select QCOM_RPROC_COMMON
remoteproc: qcom: Introduce WCNSS peripheral image loader This introduces the peripheral image loader, for loading WCNSS firmware and boot the core on e.g. MSM8974. The firmware is verified and booted with the help of the Peripheral Authentication System (PAS) in TrustZone. Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-13 09:18:59 +08:00
select QCOM_SCM
help
Say y here to support the Peripheral Image Loader for the Qualcomm
Wireless Connectivity Subsystem.
remoteproc: Supply controller driver for ST's Remote Processors Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-01-12 20:46:18 +08:00
config ST_REMOTEPROC
tristate "ST remoteproc support"
depends on ARCH_STI
remoteproc: st: add virtio communication support This patch provides virtio communication support based on mailbox for ST co-processors. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-31 20:35:54 +08:00
select MAILBOX
select STI_MBOX
remoteproc: Supply controller driver for ST's Remote Processors Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-01-12 20:46:18 +08:00
help
Say y here to support ST's adjunct processors via the remote
processor framework.
This can be either built-in or a loadable module.
remoteproc: st_slim_rproc: add a slimcore rproc driver slim core is used as a basis for many IPs in the STi chipsets such as fdma and demux. To avoid duplicating the elf loading code in each device driver a slim rproc driver has been created. This driver is designed to be used by other device drivers such as fdma, or demux whose IP is based around a slim core. The device driver can call slim_rproc_alloc() to allocate a slim rproc and slim_rproc_put() when finished. This driver takes care of ioremapping the slim registers (dmem, imem, slimcore, peripherals), whose offsets and sizes can change between IP's. It also obtains and enables any clocks used by the device. This approach avoids having a double mapping of the registers as slim_rproc does not register its own platform device. It also maps well to device tree abstraction as it allows us to have one dt node for the whole device. All of the generic rproc elf loading code can be reused, and we provide start() stop() hooks to start and stop the slim core once the firmware has been loaded. This has been tested successfully with fdma driver. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 17:39:06 +08:00
config ST_SLIM_REMOTEPROC
tristate
remoteproc: Update Kconfig setup to 'depends on REMOTEPROC' Make REMOTEPROC core a selectable kconfig option, and update remoteproc client drivers to 'depends on' the core. This avoids some nasty Kconfig recursive dependency issues. Also when using menuconfig client drivers will be hidden until the core has been enabled. Documentation/kbuild/kconfig-language.txt: Note: select should be used with care. select will force a symbol to a value without visiting the dependencies. By abusing select you are able to select a symbol FOO even if FOO depends on BAR that is not set. In general use select only for non-visible symbols (no prompts anywhere) and for symbols with no dependencies. That will limit the usefulness but on the other hand avoid the illegal configurations all over. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 17:39:08 +08:00
remoteproc: stm32: add an ST stm32_rproc driver This patch introduces a new remoteproc driver to control Cortex-M4 co-processor of the STM32 family. It provides with the following features: - start and stop - dedicated co-processor memory regions registration - coredump and recovery Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> [bjorn: Fixup of dev_dbg types and cast of int to pointer in mbox send] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-05-14 16:26:58 +08:00
config STM32_RPROC
tristate "STM32 remoteproc support"
depends on ARCH_STM32
depends on REMOTEPROC
select MAILBOX
help
Say y here to support STM32 MCU processors via the
remote processor framework.
You want to say y here in order to enable AMP
use-cases to run on your platform (dedicated firmware could be
offloaded to remote MCU processors using this framework).
This can be either built-in or a loadable module.
remoteproc: k3-dsp: Add a remoteproc driver of K3 C66x DSPs The Texas Instrument's K3 J721E SoCs have two C66x DSP Subsystems in MAIN voltage domain that are based on the TI's standard TMS320C66x DSP CorePac module. Each subsystem has a Fixed/Floating-Point DSP CPU, with 32 KB each of L1P & L1D SRAMs that can be configured and partitioned as either RAM and/or Cache, and 288 KB of L2 SRAM with 256 KB of memory configurable as either RAM and/or Cache. The CorePac also includes an Internal DMA (IDMA), External Memory Controller (EMC), Extended Memory Controller (XMC) with a Region Address Translator (RAT) unit for 32-bit to 48-bit address extension/translations, an Interrupt Controller (INTC) and a Powerdown Controller (PDC). A new remoteproc module is added to perform the device management of these DSP devices. The support is limited to images using only external DDR memory at the moment, the loading support to internal memories and any on-chip RAM memories will be added in a subsequent patch. RAT support is also left for a future patch, and as such the reserved memory carveout regions are all expected to be using memory regions within the first 2 GB. Error Recovery and Power Management features are not currently supported. The C66x remote processors do not have an MMU, and so require fixed memory carveout regions matching the firmware image addresses. Support for this is provided by mandating multiple memory regions to be attached to the remoteproc device. The first memory region will be used to serve as the DMA pool for all dynamic allocations like the vrings and vring buffers. The remaining memory regions are mapped into the kernel at device probe time, and are used to provide address translations for firmware image segments without the need for any RSC_CARVEOUT entries. Any firmware image using memory outside of the supplied reserved memory carveout regions will be errored out. The driver uses various TI-SCI interfaces to talk to the System Controller (DMSC) for managing configuration, power and reset management of these cores. IPC between the A72 cores and the DSP cores is supported through the virtio rpmsg stack using shared memory and OMAP Mailboxes. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200721223617.20312-6-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-22 06:36:16 +08:00
config TI_K3_DSP_REMOTEPROC
tristate "TI K3 DSP remoteproc support"
depends on ARCH_K3
select MAILBOX
select OMAP2PLUS_MBOX
help
Say m here to support TI's C66x and C71x DSP remote processor
subsystems on various TI K3 family of SoCs through the remote
processor framework.
It's safe to say N here if you're not interested in utilizing
the DSP slave processors.
remoteproc: Update Kconfig setup to 'depends on REMOTEPROC' Make REMOTEPROC core a selectable kconfig option, and update remoteproc client drivers to 'depends on' the core. This avoids some nasty Kconfig recursive dependency issues. Also when using menuconfig client drivers will be hidden until the core has been enabled. Documentation/kbuild/kconfig-language.txt: Note: select should be used with care. select will force a symbol to a value without visiting the dependencies. By abusing select you are able to select a symbol FOO even if FOO depends on BAR that is not set. In general use select only for non-visible symbols (no prompts anywhere) and for symbols with no dependencies. That will limit the usefulness but on the other hand avoid the illegal configurations all over. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 17:39:08 +08:00
endif # REMOTEPROC
remoteproc: st_slim_rproc: add a slimcore rproc driver slim core is used as a basis for many IPs in the STi chipsets such as fdma and demux. To avoid duplicating the elf loading code in each device driver a slim rproc driver has been created. This driver is designed to be used by other device drivers such as fdma, or demux whose IP is based around a slim core. The device driver can call slim_rproc_alloc() to allocate a slim rproc and slim_rproc_put() when finished. This driver takes care of ioremapping the slim registers (dmem, imem, slimcore, peripherals), whose offsets and sizes can change between IP's. It also obtains and enables any clocks used by the device. This approach avoids having a double mapping of the registers as slim_rproc does not register its own platform device. It also maps well to device tree abstraction as it allows us to have one dt node for the whole device. All of the generic rproc elf loading code can be reused, and we provide start() stop() hooks to start and stop the slim core once the firmware has been loaded. This has been tested successfully with fdma driver. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 17:39:06 +08:00
remoteproc: add Kconfig menu Add a dedicated Kconfig menu for the remoteproc drivers, so they don't show up in the main driver menu. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-12-14 19:01:59 +08:00
endmenu