OpenCloudOS-Kernel/tools/perf/util/symbol.c

2621 lines
59 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
#include <dirent.h>
#include <errno.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <linux/capability.h>
#include <linux/kernel.h>
#include <linux/mman.h>
#include <linux/string.h>
#include <linux/time64.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/param.h>
#include <fcntl.h>
#include <unistd.h>
#include <inttypes.h>
#include "annotate.h"
perf annotate: Use build-ids to find the right DSO We were still using the pathname found on the MMAP event, that could not be the one we used when recording, so use the build-id cache for that, only falling back to use the pathname in the MMAP event if no build-ids are available. With this we now also are able to do secure, seamless offline annotation. Example: [root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10 8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges 4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba 3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints [root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand [root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0 bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0 [root@doppio linux-2.6-tip]# Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20 23:15:33 +08:00
#include "build-id.h"
#include "cap.h"
#include "dso.h"
#include "util.h" // lsdir()
#include "debug.h"
#include "event.h"
#include "machine.h"
#include "map.h"
#include "symbol.h"
#include "map_symbol.h"
#include "mem-events.h"
#include "symsrc.h"
#include "strlist.h"
#include "intlist.h"
#include "namespaces.h"
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 14:40:45 +08:00
#include "header.h"
#include "path.h"
#include <linux/ctype.h>
#include <linux/zalloc.h>
#include <elf.h>
#include <limits.h>
#include <symbol/kallsyms.h>
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 14:29:58 +08:00
#include <sys/utsname.h>
static int dso__load_kernel_sym(struct dso *dso, struct map *map);
static int dso__load_guest_kernel_sym(struct dso *dso, struct map *map);
static bool symbol__is_idle(const char *name);
int vmlinux_path__nr_entries;
char **vmlinux_path;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 14:29:58 +08:00
struct symbol_conf symbol_conf = {
.nanosecs = false,
.use_modules = true,
.try_vmlinux_path = true,
.demangle = true,
.demangle_kernel = false,
.cumulate_callchain = true,
.time_quantum = 100 * NSEC_PER_MSEC, /* 100ms */
.show_hist_headers = true,
.symfs = "",
.event_group = true,
.inline_name = true,
.res_sample = 0,
};
static enum dso_binary_type binary_type_symtab[] = {
DSO_BINARY_TYPE__KALLSYMS,
DSO_BINARY_TYPE__GUEST_KALLSYMS,
DSO_BINARY_TYPE__JAVA_JIT,
DSO_BINARY_TYPE__DEBUGLINK,
DSO_BINARY_TYPE__BUILD_ID_CACHE,
DSO_BINARY_TYPE__BUILD_ID_CACHE_DEBUGINFO,
DSO_BINARY_TYPE__FEDORA_DEBUGINFO,
DSO_BINARY_TYPE__UBUNTU_DEBUGINFO,
DSO_BINARY_TYPE__BUILDID_DEBUGINFO,
DSO_BINARY_TYPE__SYSTEM_PATH_DSO,
DSO_BINARY_TYPE__GUEST_KMODULE,
DSO_BINARY_TYPE__GUEST_KMODULE_COMP,
DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE,
DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP,
DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO,
perf symbols: Fix debuginfo search for Ubuntu Reportedly, from 19.10 Ubuntu has begun mixing up the location of some debug symbol files, putting files expected to be in /usr/lib/debug/usr/lib into /usr/lib/debug/lib instead. Fix by adding another dso_binary_type. Example on Ubuntu 20.04 Before: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data ] $ perf script --call-trace | head -5 uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%) uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4100 uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4df0 uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4e18 uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc5128 After: $ perf script --call-trace | head -5 uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%) uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _start uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start Reported-by: Travis Downs <travis.downs@gmail.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200526155207.9172-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-26 23:52:07 +08:00
DSO_BINARY_TYPE__MIXEDUP_UBUNTU_DEBUGINFO,
DSO_BINARY_TYPE__NOT_FOUND,
};
#define DSO_BINARY_TYPE__SYMTAB_CNT ARRAY_SIZE(binary_type_symtab)
static bool symbol_type__filter(char symbol_type)
{
symbol_type = toupper(symbol_type);
return symbol_type == 'T' || symbol_type == 'W' || symbol_type == 'D' || symbol_type == 'B';
}
static int prefix_underscores_count(const char *str)
{
const char *tail = str;
while (*tail == '_')
tail++;
return tail - str;
}
perf annotate: Fix s390 gap between kernel end and module start During execution of command 'perf top' the error message: Not enough memory for annotating '__irf_end' symbol!) is emitted from this call sequence: __cmd_top perf_top__mmap_read perf_top__mmap_read_idx perf_event__process_sample hist_entry_iter__add hist_iter__top_callback perf_top__record_precise_ip hist_entry__inc_addr_samples symbol__inc_addr_samples symbol__get_annotation symbol__alloc_hist In this function the size of symbol __irf_end is calculated. The size of a symbol is the difference between its start and end address. When the symbol was read the first time, its start and end was set to: symbol__new: __irf_end 0xe954d0-0xe954d0 which is correct and maps with /proc/kallsyms: root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms 0000000000e954d0 t __irf_end root@s8360046:~/linux-4.15.0/tools/perf# In function symbol__alloc_hist() the end of symbol __irf_end is symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8 which is identical with the first module entry in /proc/kallsyms This results in a symbol size of __irf_req for histogram analyses of 70334140059072 bytes and a malloc() for this requested size fails. The root cause of this is function __dso__load_kallsyms() +-> symbols__fixup_end() Function symbols__fixup_end() enlarges the last symbol in the kallsyms map: # fgrep __irf_end /proc/kallsyms 0000000000e954d0 t __irf_end # to the start address of the first module: # cat /proc/kallsyms | sort | egrep ' [tT] ' .... 0000000000e952d0 T __security_initcall_end 0000000000e954d0 T __initramfs_size 0000000000e954d0 t __irf_end 000003ff800045a8 T fc_get_event_number [scsi_transport_fc] 000003ff800045d0 t store_fc_vport_disable [scsi_transport_fc] 000003ff800046a8 T scsi_is_fc_rport [scsi_transport_fc] 000003ff800046d0 t fc_target_setup [scsi_transport_fc] On s390 the kernel is located around memory address 0x200, 0x10000 or 0x100000, depending on linux version. Modules however start some- where around 0x3ff xxxx xxxx. This is different than x86 and produces a large gap for which histogram allocation fails. Fix this by detecting the kernel's last symbol and do no adjustment for it. Introduce a weak function and handle s390 specifics. Reported-by: Klaus Theurich <klaus.theurich@de.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190724122703.3996-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-24 20:27:03 +08:00
void __weak arch__symbols__fixup_end(struct symbol *p, struct symbol *c)
{
p->end = c->start;
}
const char * __weak arch__normalize_symbol_name(const char *name)
{
return name;
}
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 02:15:49 +08:00
int __weak arch__compare_symbol_names(const char *namea, const char *nameb)
{
return strcmp(namea, nameb);
}
int __weak arch__compare_symbol_names_n(const char *namea, const char *nameb,
unsigned int n)
{
return strncmp(namea, nameb, n);
}
int __weak arch__choose_best_symbol(struct symbol *syma,
struct symbol *symb __maybe_unused)
{
/* Avoid "SyS" kernel syscall aliases */
if (strlen(syma->name) >= 3 && !strncmp(syma->name, "SyS", 3))
return SYMBOL_B;
if (strlen(syma->name) >= 10 && !strncmp(syma->name, "compat_SyS", 10))
return SYMBOL_B;
return SYMBOL_A;
}
static int choose_best_symbol(struct symbol *syma, struct symbol *symb)
{
s64 a;
s64 b;
size_t na, nb;
/* Prefer a symbol with non zero length */
a = syma->end - syma->start;
b = symb->end - symb->start;
if ((b == 0) && (a > 0))
return SYMBOL_A;
else if ((a == 0) && (b > 0))
return SYMBOL_B;
/* Prefer a non weak symbol over a weak one */
a = syma->binding == STB_WEAK;
b = symb->binding == STB_WEAK;
if (b && !a)
return SYMBOL_A;
if (a && !b)
return SYMBOL_B;
/* Prefer a global symbol over a non global one */
a = syma->binding == STB_GLOBAL;
b = symb->binding == STB_GLOBAL;
if (a && !b)
return SYMBOL_A;
if (b && !a)
return SYMBOL_B;
/* Prefer a symbol with less underscores */
a = prefix_underscores_count(syma->name);
b = prefix_underscores_count(symb->name);
if (b > a)
return SYMBOL_A;
else if (a > b)
return SYMBOL_B;
/* Choose the symbol with the longest name */
na = strlen(syma->name);
nb = strlen(symb->name);
if (na > nb)
return SYMBOL_A;
else if (na < nb)
return SYMBOL_B;
return arch__choose_best_symbol(syma, symb);
}
void symbols__fixup_duplicate(struct rb_root_cached *symbols)
{
struct rb_node *nd;
struct symbol *curr, *next;
if (symbol_conf.allow_aliases)
return;
nd = rb_first_cached(symbols);
while (nd) {
curr = rb_entry(nd, struct symbol, rb_node);
again:
nd = rb_next(&curr->rb_node);
next = rb_entry(nd, struct symbol, rb_node);
if (!nd)
break;
if (curr->start != next->start)
continue;
if (choose_best_symbol(curr, next) == SYMBOL_A) {
rb_erase_cached(&next->rb_node, symbols);
symbol__delete(next);
goto again;
} else {
nd = rb_next(&curr->rb_node);
rb_erase_cached(&curr->rb_node, symbols);
symbol__delete(curr);
}
}
}
void symbols__fixup_end(struct rb_root_cached *symbols)
{
struct rb_node *nd, *prevnd = rb_first_cached(symbols);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
struct symbol *curr, *prev;
if (prevnd == NULL)
return;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
curr = rb_entry(prevnd, struct symbol, rb_node);
for (nd = rb_next(prevnd); nd; nd = rb_next(nd)) {
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
prev = curr;
curr = rb_entry(nd, struct symbol, rb_node);
if (prev->end == prev->start && prev->end != curr->start)
perf annotate: Fix s390 gap between kernel end and module start During execution of command 'perf top' the error message: Not enough memory for annotating '__irf_end' symbol!) is emitted from this call sequence: __cmd_top perf_top__mmap_read perf_top__mmap_read_idx perf_event__process_sample hist_entry_iter__add hist_iter__top_callback perf_top__record_precise_ip hist_entry__inc_addr_samples symbol__inc_addr_samples symbol__get_annotation symbol__alloc_hist In this function the size of symbol __irf_end is calculated. The size of a symbol is the difference between its start and end address. When the symbol was read the first time, its start and end was set to: symbol__new: __irf_end 0xe954d0-0xe954d0 which is correct and maps with /proc/kallsyms: root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms 0000000000e954d0 t __irf_end root@s8360046:~/linux-4.15.0/tools/perf# In function symbol__alloc_hist() the end of symbol __irf_end is symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8 which is identical with the first module entry in /proc/kallsyms This results in a symbol size of __irf_req for histogram analyses of 70334140059072 bytes and a malloc() for this requested size fails. The root cause of this is function __dso__load_kallsyms() +-> symbols__fixup_end() Function symbols__fixup_end() enlarges the last symbol in the kallsyms map: # fgrep __irf_end /proc/kallsyms 0000000000e954d0 t __irf_end # to the start address of the first module: # cat /proc/kallsyms | sort | egrep ' [tT] ' .... 0000000000e952d0 T __security_initcall_end 0000000000e954d0 T __initramfs_size 0000000000e954d0 t __irf_end 000003ff800045a8 T fc_get_event_number [scsi_transport_fc] 000003ff800045d0 t store_fc_vport_disable [scsi_transport_fc] 000003ff800046a8 T scsi_is_fc_rport [scsi_transport_fc] 000003ff800046d0 t fc_target_setup [scsi_transport_fc] On s390 the kernel is located around memory address 0x200, 0x10000 or 0x100000, depending on linux version. Modules however start some- where around 0x3ff xxxx xxxx. This is different than x86 and produces a large gap for which histogram allocation fails. Fix this by detecting the kernel's last symbol and do no adjustment for it. Introduce a weak function and handle s390 specifics. Reported-by: Klaus Theurich <klaus.theurich@de.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190724122703.3996-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-24 20:27:03 +08:00
arch__symbols__fixup_end(prev, curr);
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
/* Last entry */
if (curr->end == curr->start)
perf symbols: Fix symbols__fixup_end heuristic for corner cases The current symbols__fixup_end() heuristic for the last entry in the rb tree is suboptimal as it leads to not being able to recognize the symbol in the call graph in a couple of corner cases, for example: i) If the symbol has a start address (f.e. exposed via kallsyms) that is at a page boundary, then the roundup(curr->start, 4096) for the last entry will result in curr->start == curr->end with a symbol length of zero. ii) If the symbol has a start address that is shortly before a page boundary, then also here, curr->end - curr->start will just be very few bytes, where it's unrealistic that we could perform a match against. Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so that we can catch such corner cases and have a better chance to find that specific symbol. It's still just best effort as the real end of the symbol is unknown to us (and could even be at a larger offset than the current range), but better than the current situation. Alexei reported that he recently run into case i) with a JITed eBPF program (these are all page aligned) as the last symbol which wasn't properly shown in the call graph (while other eBPF program symbols in the rb tree were displayed correctly). Since this is a generic issue, lets try to improve the heuristic a bit. Reported-and-Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup") Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-16 05:53:37 +08:00
curr->end = roundup(curr->start, 4096) + 4096;
}
void maps__fixup_end(struct maps *maps)
{
struct map *prev = NULL, *curr;
down_write(&maps->lock);
maps__for_each_entry(maps, curr) {
if (prev != NULL && !prev->end)
prev->end = curr->start;
prev = curr;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
}
/*
* We still haven't the actual symbols, so guess the
* last map final address.
*/
if (curr && !curr->end)
perf record: Fix wrong size in perf_record_mmap for last kernel module During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 21:49:02 +08:00
curr->end = ~0ULL;
up_write(&maps->lock);
}
struct symbol *symbol__new(u64 start, u64 len, u8 binding, u8 type, const char *name)
{
size_t namelen = strlen(name) + 1;
struct symbol *sym = calloc(1, (symbol_conf.priv_size +
sizeof(*sym) + namelen));
if (sym == NULL)
perf_counter tools: Add 'perf annotate' feature Add new perf sub-command to display annotated source code: $ perf annotate decode_tree_entry ------------------------------------------------ Percent | Source code & Disassembly of /home/mingo/git/git ------------------------------------------------ : : /home/mingo/git/git: file format elf64-x86-64 : : : Disassembly of section .text: : : 00000000004a0da0 <decode_tree_entry>: : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 3.82 : 4a0da0: 41 54 push %r12 : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.17 : 4a0da2: 48 83 fa 17 cmp $0x17,%rdx : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 0.00 : 4a0da6: 49 89 fc mov %rdi,%r12 0.00 : 4a0da9: 55 push %rbp 3.37 : 4a0daa: 53 push %rbx : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.08 : 4a0dab: 76 73 jbe 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dad: 80 7c 16 eb 00 cmpb $0x0,-0x15(%rsi,%rdx,1) 3.48 : 4a0db2: 75 6c jne 4a0e20 <decode_tree_entry+0x80> : static const char *get_mode(const char *str, unsigned int *modep) : { : unsigned char c; : unsigned int mode = 0; : : if (*str == ' ') 1.94 : 4a0db4: 0f b6 06 movzbl (%rsi),%eax 0.39 : 4a0db7: 3c 20 cmp $0x20,%al 0.00 : 4a0db9: 74 65 je 4a0e20 <decode_tree_entry+0x80> : return NULL; : : while ((c = *str++) != ' ') { 0.06 : 4a0dbb: 89 c2 mov %eax,%edx : if (c < '0' || c > '7') 1.99 : 4a0dbd: 31 ed xor %ebp,%ebp : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 1.74 : 4a0dbf: 48 8d 5e 01 lea 0x1(%rsi),%rbx : if (c < '0' || c > '7') 0.00 : 4a0dc3: 8d 42 d0 lea -0x30(%rdx),%eax 0.17 : 4a0dc6: 3c 07 cmp $0x7,%al 0.00 : 4a0dc8: 76 0d jbe 4a0dd7 <decode_tree_entry+0x37> 0.00 : 4a0dca: eb 54 jmp 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dcc: 0f 1f 40 00 nopl 0x0(%rax) 16.57 : 4a0dd0: 8d 42 d0 lea -0x30(%rdx),%eax 0.14 : 4a0dd3: 3c 07 cmp $0x7,%al 0.00 : 4a0dd5: 77 49 ja 4a0e20 <decode_tree_entry+0x80> : return NULL; : mode = (mode << 3) + (c - '0'); 3.12 : 4a0dd7: 0f b6 c2 movzbl %dl,%eax : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 0.00 : 4a0dda: 0f b6 13 movzbl (%rbx),%edx 16.74 : 4a0ddd: 48 83 c3 01 add $0x1,%rbx : if (c < '0' || c > '7') : return NULL; : mode = (mode << 3) + (c - '0'); The first column is the percentage of samples that arrived on that particular line - relative to the total cost of the function. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 21:48:52 +08:00
return NULL;
if (symbol_conf.priv_size) {
if (symbol_conf.init_annotation) {
struct annotation *notes = (void *)sym;
pthread_mutex_init(&notes->lock, NULL);
}
sym = ((void *)sym) + symbol_conf.priv_size;
}
sym->start = start;
sym->end = len ? start + len : start;
sym->type = type;
sym->binding = binding;
sym->namelen = namelen - 1;
pr_debug4("%s: %s %#" PRIx64 "-%#" PRIx64 "\n",
__func__, name, start, sym->end);
memcpy(sym->name, name, namelen);
return sym;
}
void symbol__delete(struct symbol *sym)
{
free(((void *)sym) - symbol_conf.priv_size);
}
void symbols__delete(struct rb_root_cached *symbols)
{
struct symbol *pos;
struct rb_node *next = rb_first_cached(symbols);
while (next) {
pos = rb_entry(next, struct symbol, rb_node);
next = rb_next(&pos->rb_node);
rb_erase_cached(&pos->rb_node, symbols);
symbol__delete(pos);
}
}
void __symbols__insert(struct rb_root_cached *symbols,
struct symbol *sym, bool kernel)
{
struct rb_node **p = &symbols->rb_root.rb_node;
struct rb_node *parent = NULL;
const u64 ip = sym->start;
struct symbol *s;
bool leftmost = true;
if (kernel) {
const char *name = sym->name;
/*
* ppc64 uses function descriptors and appends a '.' to the
* start of every instruction address. Remove it.
*/
if (name[0] == '.')
name++;
sym->idle = symbol__is_idle(name);
}
while (*p != NULL) {
parent = *p;
s = rb_entry(parent, struct symbol, rb_node);
if (ip < s->start)
p = &(*p)->rb_left;
else {
p = &(*p)->rb_right;
leftmost = false;
}
}
rb_link_node(&sym->rb_node, parent, p);
rb_insert_color_cached(&sym->rb_node, symbols, leftmost);
}
void symbols__insert(struct rb_root_cached *symbols, struct symbol *sym)
{
__symbols__insert(symbols, sym, false);
}
static struct symbol *symbols__find(struct rb_root_cached *symbols, u64 ip)
{
struct rb_node *n;
if (symbols == NULL)
return NULL;
n = symbols->rb_root.rb_node;
while (n) {
struct symbol *s = rb_entry(n, struct symbol, rb_node);
if (ip < s->start)
n = n->rb_left;
perf symbols: Fix handling of zero-length symbols. This change introduces a fix to symbols__find, so that it is able to find symbols of length zero (where start == end). The current code has the following problem: - The current implementation of symbols__find is unable to find any symbols of length zero. - The db-export framework explicitly creates zero length symbols at locations where no symbol currently exists. The combination of the two above behaviors results in behavior similar to the example below. 1. addr_location is created for a sample, but symbol is unable to be resolved. 2. db export creates an "unknown" symbol of length zero at that address and inserts it into the dso. 3. A new sample comes in at the same address, but symbol__find is unable to find the zero length symbol, so it is still unresolved. 4. db export sees the symbol is unresolved, and allocated a duplicate symbol, even though it already did this in step 2. This behavior continues every time an address without symbol information is seen, which causes a very large number of these symbols to be allocated. The effect of this fix can be observed by looking at the contents of an exported database before/after the fix (generated with scripts/python/export-to-postgresql.py) Ex. BEFORE THE CHANGE: example_db=# select count(*) from symbols; count -------- 900213 (1 row) example_db=# select count(*) from symbols where symbols.name='unknown'; count -------- 897355 (1 row) example_db=# select count(*) from symbols where symbols.name!='unknown'; count ------- 2858 (1 row) AFTER THE CHANGE: example_db=# select count(*) from symbols; count ------- 25217 (1 row) example_db=# select count(*) from symbols where name='unknown'; count ------- 22359 (1 row) example_db=# select count(*) from symbols where name!='unknown'; count ------- 2858 (1 row) Signed-off-by: Chris Phlipot <cphlipot0@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1462612620-25008-1-git-send-email-cphlipot0@gmail.com [ Moved the test to later in the rb_tree tests, as this not the likely case ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-07 17:16:59 +08:00
else if (ip > s->end || (ip == s->end && ip != s->start))
n = n->rb_right;
else
return s;
}
return NULL;
}
static struct symbol *symbols__first(struct rb_root_cached *symbols)
{
struct rb_node *n = rb_first_cached(symbols);
if (n)
return rb_entry(n, struct symbol, rb_node);
return NULL;
}
static struct symbol *symbols__last(struct rb_root_cached *symbols)
{
struct rb_node *n = rb_last(&symbols->rb_root);
if (n)
return rb_entry(n, struct symbol, rb_node);
return NULL;
}
static struct symbol *symbols__next(struct symbol *sym)
{
struct rb_node *n = rb_next(&sym->rb_node);
if (n)
return rb_entry(n, struct symbol, rb_node);
return NULL;
}
static void symbols__insert_by_name(struct rb_root_cached *symbols, struct symbol *sym)
{
struct rb_node **p = &symbols->rb_root.rb_node;
struct rb_node *parent = NULL;
struct symbol_name_rb_node *symn, *s;
bool leftmost = true;
symn = container_of(sym, struct symbol_name_rb_node, sym);
while (*p != NULL) {
parent = *p;
s = rb_entry(parent, struct symbol_name_rb_node, rb_node);
if (strcmp(sym->name, s->sym.name) < 0)
p = &(*p)->rb_left;
else {
p = &(*p)->rb_right;
leftmost = false;
}
}
rb_link_node(&symn->rb_node, parent, p);
rb_insert_color_cached(&symn->rb_node, symbols, leftmost);
}
static void symbols__sort_by_name(struct rb_root_cached *symbols,
struct rb_root_cached *source)
{
struct rb_node *nd;
for (nd = rb_first_cached(source); nd; nd = rb_next(nd)) {
struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
symbols__insert_by_name(symbols, pos);
}
}
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 02:15:49 +08:00
int symbol__match_symbol_name(const char *name, const char *str,
enum symbol_tag_include includes)
{
const char *versioning;
if (includes == SYMBOL_TAG_INCLUDE__DEFAULT_ONLY &&
(versioning = strstr(name, "@@"))) {
int len = strlen(str);
if (len < versioning - name)
len = versioning - name;
return arch__compare_symbol_names_n(name, str, len);
} else
return arch__compare_symbol_names(name, str);
}
static struct symbol *symbols__find_by_name(struct rb_root_cached *symbols,
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 02:15:49 +08:00
const char *name,
enum symbol_tag_include includes)
{
struct rb_node *n;
struct symbol_name_rb_node *s = NULL;
if (symbols == NULL)
return NULL;
n = symbols->rb_root.rb_node;
while (n) {
int cmp;
s = rb_entry(n, struct symbol_name_rb_node, rb_node);
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 02:15:49 +08:00
cmp = symbol__match_symbol_name(s->sym.name, name, includes);
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 02:15:49 +08:00
if (cmp > 0)
n = n->rb_left;
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 02:15:49 +08:00
else if (cmp < 0)
n = n->rb_right;
else
break;
}
if (n == NULL)
return NULL;
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 02:15:49 +08:00
if (includes != SYMBOL_TAG_INCLUDE__DEFAULT_ONLY)
/* return first symbol that has same name (if any) */
for (n = rb_prev(n); n; n = rb_prev(n)) {
struct symbol_name_rb_node *tmp;
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 02:15:49 +08:00
tmp = rb_entry(n, struct symbol_name_rb_node, rb_node);
if (arch__compare_symbol_names(tmp->sym.name, s->sym.name))
break;
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 02:15:49 +08:00
s = tmp;
}
return &s->sym;
}
void dso__reset_find_symbol_cache(struct dso *dso)
{
dso->last_find_result.addr = 0;
dso->last_find_result.symbol = NULL;
}
void dso__insert_symbol(struct dso *dso, struct symbol *sym)
{
__symbols__insert(&dso->symbols, sym, dso->kernel);
/* update the symbol cache if necessary */
if (dso->last_find_result.addr >= sym->start &&
(dso->last_find_result.addr < sym->end ||
sym->start == sym->end)) {
dso->last_find_result.symbol = sym;
}
}
perf tools: Fix crash with non-jited bpf progs The addr in PERF_RECORD_KSYMBOL events for non-jited bpf progs points to the bpf interpreter, ie. within kernel text section. When processing the unregister event, this causes unexpected removal of vmlinux_map, crashing perf later in cleanup: # perf record -- timeout --signal=INT 2s /usr/share/bcc/tools/execsnoop PCOMM PID PPID RET ARGS [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.208 MB perf.data (5155 samples) ] perf: tools/include/linux/refcount.h:131: refcount_sub_and_test: Assertion `!(new > val)' failed. Aborted (core dumped) # perf script -D|grep KSYM 0 0xa40 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_f958f6eb72ef5af6 0 0xab0 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_8c42dee26e8cd4c2 0 0xb20 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_f958f6eb72ef5af6 108563691893 0x33d98 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3b0 len 0 type 1 flags 0x0 name bpf_prog_bc5697a410556fc2_syscall__execve 108568518458 0x34098 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3f0 len 0 type 1 flags 0x0 name bpf_prog_45e2203c2928704d_do_ret_sys_execve 109301967895 0x34830 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3b0 len 0 type 1 flags 0x1 name bpf_prog_bc5697a410556fc2_syscall__execve 109302007356 0x348b0 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3f0 len 0 type 1 flags 0x1 name bpf_prog_45e2203c2928704d_do_ret_sys_execve perf: tools/include/linux/refcount.h:131: refcount_sub_and_test: Assertion `!(new > val)' failed. Here the addresses match the bpf interpreter: # grep -e ffffffffa9b6b530 -e ffffffffa9b6b3b0 -e ffffffffa9b6b3f0 /proc/kallsyms ffffffffa9b6b3b0 t __bpf_prog_run224 ffffffffa9b6b3f0 t __bpf_prog_run192 ffffffffa9b6b530 t __bpf_prog_run32 Fix by not allowing vmlinux_map to be removed by PERF_RECORD_KSYMBOL unregister event. Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201016114718.54332-1-tommi.t.rantala@nokia.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-16 19:47:18 +08:00
void dso__delete_symbol(struct dso *dso, struct symbol *sym)
{
rb_erase_cached(&sym->rb_node, &dso->symbols);
symbol__delete(sym);
dso__reset_find_symbol_cache(dso);
}
struct symbol *dso__find_symbol(struct dso *dso, u64 addr)
{
if (dso->last_find_result.addr != addr || dso->last_find_result.symbol == NULL) {
dso->last_find_result.addr = addr;
dso->last_find_result.symbol = symbols__find(&dso->symbols, addr);
}
return dso->last_find_result.symbol;
}
struct symbol *dso__first_symbol(struct dso *dso)
{
return symbols__first(&dso->symbols);
}
struct symbol *dso__last_symbol(struct dso *dso)
{
return symbols__last(&dso->symbols);
}
struct symbol *dso__next_symbol(struct symbol *sym)
{
return symbols__next(sym);
}
struct symbol *symbol__next_by_name(struct symbol *sym)
{
struct symbol_name_rb_node *s = container_of(sym, struct symbol_name_rb_node, sym);
struct rb_node *n = rb_next(&s->rb_node);
return n ? &rb_entry(n, struct symbol_name_rb_node, rb_node)->sym : NULL;
}
/*
* Returns first symbol that matched with @name.
*/
struct symbol *dso__find_symbol_by_name(struct dso *dso, const char *name)
{
struct symbol *s = symbols__find_by_name(&dso->symbol_names, name,
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 02:15:49 +08:00
SYMBOL_TAG_INCLUDE__NONE);
if (!s)
s = symbols__find_by_name(&dso->symbol_names, name,
perf symbols: Allow user probes on versioned symbols Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-26 02:15:49 +08:00
SYMBOL_TAG_INCLUDE__DEFAULT_ONLY);
return s;
}
void dso__sort_by_name(struct dso *dso)
{
dso__set_sorted_by_name(dso);
return symbols__sort_by_name(&dso->symbol_names, &dso->symbols);
}
/*
* While we find nice hex chars, build a long_val.
* Return number of chars processed.
*/
static int hex2u64(const char *ptr, u64 *long_val)
{
char *p;
*long_val = strtoull(ptr, &p, 16);
return p - ptr;
}
int modules__parse(const char *filename, void *arg,
int (*process_module)(void *arg, const char *name,
perf record: Fix wrong size in perf_record_mmap for last kernel module During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 21:49:02 +08:00
u64 start, u64 size))
{
char *line = NULL;
size_t n;
FILE *file;
int err = 0;
file = fopen(filename, "r");
if (file == NULL)
return -1;
while (1) {
char name[PATH_MAX];
perf record: Fix wrong size in perf_record_mmap for last kernel module During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 21:49:02 +08:00
u64 start, size;
char *sep, *endptr;
ssize_t line_len;
line_len = getline(&line, &n, file);
if (line_len < 0) {
if (feof(file))
break;
err = -1;
goto out;
}
if (!line) {
err = -1;
goto out;
}
line[--line_len] = '\0'; /* \n */
sep = strrchr(line, 'x');
if (sep == NULL)
continue;
hex2u64(sep + 1, &start);
sep = strchr(line, ' ');
if (sep == NULL)
continue;
*sep = '\0';
scnprintf(name, sizeof(name), "[%s]", line);
perf record: Fix wrong size in perf_record_mmap for last kernel module During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 21:49:02 +08:00
size = strtoul(sep + 1, &endptr, 0);
if (*endptr != ' ' && *endptr != '\t')
continue;
err = process_module(arg, name, start, size);
if (err)
break;
}
out:
free(line);
fclose(file);
return err;
}
/*
* These are symbols in the kernel image, so make sure that
* sym is from a kernel DSO.
*/
static bool symbol__is_idle(const char *name)
{
const char * const idle_symbols[] = {
"acpi_idle_do_entry",
"acpi_processor_ffh_cstate_enter",
"arch_cpu_idle",
"cpu_idle",
"cpu_startup_entry",
"idle_cpu",
"intel_idle",
"default_idle",
"native_safe_halt",
"enter_idle",
"exit_idle",
"mwait_idle",
"mwait_idle_with_hints",
"mwait_idle_with_hints.constprop.0",
"poll_idle",
"ppc64_runlatch_off",
"pseries_dedicated_idle_sleep",
"psw_idle",
"psw_idle_exit",
NULL
};
int i;
static struct strlist *idle_symbols_list;
if (idle_symbols_list)
return strlist__has_entry(idle_symbols_list, name);
idle_symbols_list = strlist__new(NULL, NULL);
for (i = 0; idle_symbols[i]; i++)
strlist__add(idle_symbols_list, idle_symbols[i]);
return strlist__has_entry(idle_symbols_list, name);
}
static int map__process_kallsym_symbol(void *arg, const char *name,
char type, u64 start)
{
struct symbol *sym;
struct dso *dso = arg;
struct rb_root_cached *root = &dso->symbols;
if (!symbol_type__filter(type))
return 0;
/*
* module symbols are not sorted so we add all
* symbols, setting length to 0, and rely on
* symbols__fixup_end() to fix it up.
*/
sym = symbol__new(start, 0, kallsyms2elf_binding(type), kallsyms2elf_type(type), name);
if (sym == NULL)
return -ENOMEM;
/*
* We will pass the symbols to the filter later, in
* map__split_kallsyms, when we have split the maps per module
*/
__symbols__insert(root, sym, !strchr(name, '['));
return 0;
}
/*
* Loads the function entries in /proc/kallsyms into kernel_map->dso,
* so that we can in the next step set the symbol ->end address and then
* call kernel_maps__split_kallsyms.
*/
static int dso__load_all_kallsyms(struct dso *dso, const char *filename)
{
return kallsyms__parse(filename, dso, map__process_kallsym_symbol);
}
static int maps__split_kallsyms_for_kcore(struct maps *kmaps, struct dso *dso)
{
struct map *curr_map;
struct symbol *pos;
int count = 0;
struct rb_root_cached old_root = dso->symbols;
struct rb_root_cached *root = &dso->symbols;
struct rb_node *next = rb_first_cached(root);
if (!kmaps)
return -1;
*root = RB_ROOT_CACHED;
while (next) {
char *module;
pos = rb_entry(next, struct symbol, rb_node);
next = rb_next(&pos->rb_node);
rb_erase_cached(&pos->rb_node, &old_root);
RB_CLEAR_NODE(&pos->rb_node);
module = strchr(pos->name, '\t');
if (module)
*module = '\0';
curr_map = maps__find(kmaps, pos->start);
if (!curr_map) {
symbol__delete(pos);
continue;
}
pos->start -= curr_map->start - curr_map->pgoff;
if (pos->end > curr_map->end)
pos->end = curr_map->end;
if (pos->end)
pos->end -= curr_map->start - curr_map->pgoff;
symbols__insert(&curr_map->dso->symbols, pos);
++count;
}
/* Symbols have been adjusted */
dso->adjust_symbols = 1;
return count;
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
/*
* Split the symbols into maps, making sure there are no overlaps, i.e. the
* kernel range is broken in several maps, named [kernel].N, as we don't have
* the original ELF section names vmlinux have.
*/
static int maps__split_kallsyms(struct maps *kmaps, struct dso *dso, u64 delta,
struct map *initial_map)
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
{
struct machine *machine;
struct map *curr_map = initial_map;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
struct symbol *pos;
int count = 0, moved = 0;
struct rb_root_cached *root = &dso->symbols;
struct rb_node *next = rb_first_cached(root);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
int kernel_range = 0;
bool x86_64;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
if (!kmaps)
return -1;
machine = kmaps->machine;
x86_64 = machine__is(machine, "x86_64");
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
while (next) {
char *module;
pos = rb_entry(next, struct symbol, rb_node);
next = rb_next(&pos->rb_node);
module = strchr(pos->name, '\t');
if (module) {
if (!symbol_conf.use_modules)
goto discard_symbol;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
*module++ = '\0';
if (strcmp(curr_map->dso->short_name, module)) {
if (curr_map != initial_map &&
dso->kernel == DSO_SPACE__KERNEL_GUEST &&
machine__is_default_guest(machine)) {
/*
* We assume all symbols of a module are
* continuous in * kallsyms, so curr_map
* points to a module and all its
* symbols are in its kmap. Mark it as
* loaded.
*/
dso__set_loaded(curr_map->dso);
}
curr_map = maps__find_by_name(kmaps, module);
if (curr_map == NULL) {
pr_debug("%s/proc/{kallsyms,modules} "
"inconsistency while looking "
"for \"%s\" module!\n",
machine->root_dir, module);
curr_map = initial_map;
goto discard_symbol;
}
if (curr_map->dso->loaded &&
!machine__is_default_guest(machine))
goto discard_symbol;
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
/*
* So that we look just like we get from .ko files,
* i.e. not prelinked, relative to initial_map->start.
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
*/
pos->start = curr_map->map_ip(curr_map, pos->start);
pos->end = curr_map->map_ip(curr_map, pos->end);
} else if (x86_64 && is_entry_trampoline(pos->name)) {
/*
* These symbols are not needed anymore since the
* trampoline maps refer to the text section and it's
* symbols instead. Avoid having to deal with
* relocations, and the assumption that the first symbol
* is the start of kernel text, by simply removing the
* symbols at this point.
*/
goto discard_symbol;
} else if (curr_map != initial_map) {
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
char dso_name[PATH_MAX];
struct dso *ndso;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
if (delta) {
/* Kernel was relocated at boot time */
pos->start -= delta;
pos->end -= delta;
}
if (count == 0) {
curr_map = initial_map;
goto add_symbol;
}
if (dso->kernel == DSO_SPACE__KERNEL_GUEST)
snprintf(dso_name, sizeof(dso_name),
"[guest.kernel].%d",
kernel_range++);
else
snprintf(dso_name, sizeof(dso_name),
"[kernel].%d",
kernel_range++);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
ndso = dso__new(dso_name);
if (ndso == NULL)
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
return -1;
ndso->kernel = dso->kernel;
curr_map = map__new2(pos->start, ndso);
if (curr_map == NULL) {
dso__put(ndso);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
return -1;
}
curr_map->map_ip = curr_map->unmap_ip = identity__map_ip;
maps__insert(kmaps, curr_map);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
++kernel_range;
} else if (delta) {
/* Kernel was relocated at boot time */
pos->start -= delta;
pos->end -= delta;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
}
add_symbol:
if (curr_map != initial_map) {
rb_erase_cached(&pos->rb_node, root);
symbols__insert(&curr_map->dso->symbols, pos);
++moved;
} else
++count;
continue;
discard_symbol:
rb_erase_cached(&pos->rb_node, root);
symbol__delete(pos);
}
if (curr_map != initial_map &&
dso->kernel == DSO_SPACE__KERNEL_GUEST &&
machine__is_default_guest(kmaps->machine)) {
dso__set_loaded(curr_map->dso);
}
return count + moved;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
}
bool symbol__restricted_filename(const char *filename,
const char *restricted_filename)
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 20:53:51 +08:00
{
bool restricted = false;
if (symbol_conf.kptr_restrict) {
char *r = realpath(filename, NULL);
if (r != NULL) {
restricted = strcmp(r, restricted_filename) == 0;
free(r);
return restricted;
}
}
return restricted;
}
struct module_info {
struct rb_node rb_node;
char *name;
u64 start;
};
static void add_module(struct module_info *mi, struct rb_root *modules)
{
struct rb_node **p = &modules->rb_node;
struct rb_node *parent = NULL;
struct module_info *m;
while (*p != NULL) {
parent = *p;
m = rb_entry(parent, struct module_info, rb_node);
if (strcmp(mi->name, m->name) < 0)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
}
rb_link_node(&mi->rb_node, parent, p);
rb_insert_color(&mi->rb_node, modules);
}
static void delete_modules(struct rb_root *modules)
{
struct module_info *mi;
struct rb_node *next = rb_first(modules);
while (next) {
mi = rb_entry(next, struct module_info, rb_node);
next = rb_next(&mi->rb_node);
rb_erase(&mi->rb_node, modules);
zfree(&mi->name);
free(mi);
}
}
static struct module_info *find_module(const char *name,
struct rb_root *modules)
{
struct rb_node *n = modules->rb_node;
while (n) {
struct module_info *m;
int cmp;
m = rb_entry(n, struct module_info, rb_node);
cmp = strcmp(name, m->name);
if (cmp < 0)
n = n->rb_left;
else if (cmp > 0)
n = n->rb_right;
else
return m;
}
return NULL;
}
perf record: Fix wrong size in perf_record_mmap for last kernel module During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 21:49:02 +08:00
static int __read_proc_modules(void *arg, const char *name, u64 start,
u64 size __maybe_unused)
{
struct rb_root *modules = arg;
struct module_info *mi;
mi = zalloc(sizeof(struct module_info));
if (!mi)
return -ENOMEM;
mi->name = strdup(name);
mi->start = start;
if (!mi->name) {
free(mi);
return -ENOMEM;
}
add_module(mi, modules);
return 0;
}
static int read_proc_modules(const char *filename, struct rb_root *modules)
{
if (symbol__restricted_filename(filename, "/proc/modules"))
return -1;
if (modules__parse(filename, modules, __read_proc_modules)) {
delete_modules(modules);
return -1;
}
return 0;
}
perf buildid-cache: Add ability to add kcore to the cache kcore can be used to view the running kernel object code. However, kcore changes as modules are loaded and unloaded, and when the kernel decides to modify its own code. Consequently it is useful to create a copy of kcore at a particular time. Unlike vmlinux, kcore is not unique for a given build-id. And in addition, the kallsyms and modules files are also needed. The tool therefore creates a directory: ~/.debug/[kernel.kcore]/<build-id>/<YYYYmmddHHMMSShh> which contains: kcore, kallsyms and modules. Note that the copied kcore contains only code sections. See the kcore_copy() function for how that is determined. The tool will not make additional copies of kcore if there is already one with the same modules at the same addresses. Currently, perf tools will not look for kcore in the cache. That is addressed in another patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/525BF849.5030405@intel.com [ renamed 'index' to 'idx' to avoid shadowing string.h symbol in f12, use at least one member initializer when initializing a struct to zeros, also to fix the build on f12 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-14 21:57:29 +08:00
int compare_proc_modules(const char *from, const char *to)
{
struct rb_root from_modules = RB_ROOT;
struct rb_root to_modules = RB_ROOT;
struct rb_node *from_node, *to_node;
struct module_info *from_m, *to_m;
int ret = -1;
if (read_proc_modules(from, &from_modules))
return -1;
if (read_proc_modules(to, &to_modules))
goto out_delete_from;
from_node = rb_first(&from_modules);
to_node = rb_first(&to_modules);
while (from_node) {
if (!to_node)
break;
from_m = rb_entry(from_node, struct module_info, rb_node);
to_m = rb_entry(to_node, struct module_info, rb_node);
if (from_m->start != to_m->start ||
strcmp(from_m->name, to_m->name))
break;
from_node = rb_next(from_node);
to_node = rb_next(to_node);
}
if (!from_node && !to_node)
ret = 0;
delete_modules(&to_modules);
out_delete_from:
delete_modules(&from_modules);
return ret;
}
static int do_validate_kcore_modules(const char *filename, struct maps *kmaps)
{
struct rb_root modules = RB_ROOT;
struct map *old_map;
int err;
err = read_proc_modules(filename, &modules);
if (err)
return err;
maps__for_each_entry(kmaps, old_map) {
struct module_info *mi;
if (!__map__is_kmodule(old_map)) {
continue;
}
/* Module must be in memory at the same address */
mi = find_module(old_map->dso->short_name, &modules);
if (!mi || mi->start != old_map->start) {
err = -EINVAL;
goto out;
}
}
out:
delete_modules(&modules);
return err;
}
/*
* If kallsyms is referenced by name then we look for filename in the same
* directory.
*/
static bool filename_from_kallsyms_filename(char *filename,
const char *base_name,
const char *kallsyms_filename)
{
char *name;
strcpy(filename, kallsyms_filename);
name = strrchr(filename, '/');
if (!name)
return false;
name += 1;
if (!strcmp(name, "kallsyms")) {
strcpy(name, base_name);
return true;
}
return false;
}
static int validate_kcore_modules(const char *kallsyms_filename,
struct map *map)
{
struct maps *kmaps = map__kmaps(map);
char modules_filename[PATH_MAX];
if (!kmaps)
return -EINVAL;
if (!filename_from_kallsyms_filename(modules_filename, "modules",
kallsyms_filename))
return -EINVAL;
if (do_validate_kcore_modules(modules_filename, kmaps))
return -EINVAL;
return 0;
}
static int validate_kcore_addresses(const char *kallsyms_filename,
struct map *map)
{
struct kmap *kmap = map__kmap(map);
if (!kmap)
return -EINVAL;
if (kmap->ref_reloc_sym && kmap->ref_reloc_sym->name) {
u64 start;
perf symbols: Accept symbols starting at address 0 That is the case of _text on s390, and we have some functions that return an address, using address zero to report problems, oops. This would lead the symbol loading routines to not use "_text" as the reference relocation symbol, or the first symbol for the kernel, but use instead "_stext", that is at the same address on x86_64 and others, but not on s390: [acme@localhost perf-4.11.0-rc6]$ head -15 /proc/kallsyms 0000000000000000 T _text 0000000000000418 t iplstart 0000000000000800 T start 000000000000080a t .base 000000000000082e t .sk8x8 0000000000000834 t .gotr 0000000000000842 t .cmd 0000000000000846 t .parm 000000000000084a t .lowcase 0000000000010000 T startup 0000000000010010 T startup_kdump 0000000000010214 t startup_kdump_relocated 0000000000011000 T startup_continue 00000000000112a0 T _ehead 0000000000100000 T _stext [acme@localhost perf-4.11.0-rc6]$ Which in turn would make 'perf test vmlinux' to fail because it wouldn't find the symbols before "_stext" in kallsyms. Fix it by using the return value only for errors and storing the address, when the symbol is successfully found, in a provided pointer arg. Before this patch: After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 40693 Looking at the vmlinux_path (8 entries long) Using /usr/lib/debug/lib/modules/3.10.0-654.el7.s390x/vmlinux for symbols ERR : 0: _text not on kallsyms ERR : 0x418: iplstart not on kallsyms ERR : 0x800: start not on kallsyms ERR : 0x80a: .base not on kallsyms ERR : 0x82e: .sk8x8 not on kallsyms ERR : 0x834: .gotr not on kallsyms ERR : 0x842: .cmd not on kallsyms ERR : 0x846: .parm not on kallsyms ERR : 0x84a: .lowcase not on kallsyms ERR : 0x10000: startup not on kallsyms ERR : 0x10010: startup_kdump not on kallsyms ERR : 0x10214: startup_kdump_relocated not on kallsyms ERR : 0x11000: startup_continue not on kallsyms ERR : 0x112a0: _ehead not on kallsyms <SNIP warnings> test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@localhost perf-4.11.0-rc6]$ After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 47160 <SNIP warnings> test child finished with 0 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@localhost perf-4.11.0-rc6]$ Reported-by: Michael Petlan <mpetlan@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9x9bwgd3btwdk1u51xie93fz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-28 08:21:09 +08:00
if (kallsyms__get_function_start(kallsyms_filename,
kmap->ref_reloc_sym->name, &start))
return -ENOENT;
if (start != kmap->ref_reloc_sym->addr)
return -EINVAL;
}
return validate_kcore_modules(kallsyms_filename, map);
}
struct kcore_mapfn_data {
struct dso *dso;
struct list_head maps;
};
static int kcore_mapfn(u64 start, u64 len, u64 pgoff, void *data)
{
struct kcore_mapfn_data *md = data;
struct map *map;
map = map__new2(start, md->dso);
if (map == NULL)
return -ENOMEM;
map->end = map->start + len;
map->pgoff = pgoff;
list_add(&map->node, &md->maps);
return 0;
}
/*
* Merges map into maps by splitting the new map within the existing map
* regions.
*/
int maps__merge_in(struct maps *kmaps, struct map *new_map)
{
struct map *old_map;
LIST_HEAD(merged);
maps__for_each_entry(kmaps, old_map) {
/* no overload with this one */
if (new_map->end < old_map->start ||
new_map->start >= old_map->end)
continue;
if (new_map->start < old_map->start) {
/*
* |new......
* |old....
*/
if (new_map->end < old_map->end) {
/*
* |new......| -> |new..|
* |old....| -> |old....|
*/
new_map->end = old_map->start;
} else {
/*
* |new.............| -> |new..| |new..|
* |old....| -> |old....|
*/
struct map *m = map__clone(new_map);
if (!m)
return -ENOMEM;
m->end = old_map->start;
list_add_tail(&m->node, &merged);
new_map->pgoff += old_map->end - new_map->start;
new_map->start = old_map->end;
}
} else {
/*
* |new......
* |old....
*/
if (new_map->end < old_map->end) {
/*
* |new..| -> x
* |old.........| -> |old.........|
*/
map__put(new_map);
new_map = NULL;
break;
} else {
/*
* |new......| -> |new...|
* |old....| -> |old....|
*/
new_map->pgoff += old_map->end - new_map->start;
new_map->start = old_map->end;
}
}
}
while (!list_empty(&merged)) {
old_map = list_entry(merged.next, struct map, node);
list_del_init(&old_map->node);
maps__insert(kmaps, old_map);
map__put(old_map);
}
if (new_map) {
maps__insert(kmaps, new_map);
map__put(new_map);
}
return 0;
}
static int dso__load_kcore(struct dso *dso, struct map *map,
const char *kallsyms_filename)
{
struct maps *kmaps = map__kmaps(map);
struct kcore_mapfn_data md;
struct map *old_map, *new_map, *replacement_map = NULL, *next;
struct machine *machine;
bool is_64_bit;
int err, fd;
char kcore_filename[PATH_MAX];
u64 stext;
if (!kmaps)
return -EINVAL;
machine = kmaps->machine;
/* This function requires that the map is the kernel map */
if (!__map__is_kernel(map))
return -EINVAL;
if (!filename_from_kallsyms_filename(kcore_filename, "kcore",
kallsyms_filename))
return -EINVAL;
/* Modules and kernel must be present at their original addresses */
if (validate_kcore_addresses(kallsyms_filename, map))
return -EINVAL;
md.dso = dso;
INIT_LIST_HEAD(&md.maps);
fd = open(kcore_filename, O_RDONLY);
if (fd < 0) {
pr_debug("Failed to open %s. Note /proc/kcore requires CAP_SYS_RAWIO capability to access.\n",
kcore_filename);
return -EINVAL;
}
/* Read new maps into temporary lists */
err = file__read_maps(fd, map->prot & PROT_EXEC, kcore_mapfn, &md,
&is_64_bit);
if (err)
goto out_err;
dso->is_64_bit = is_64_bit;
if (list_empty(&md.maps)) {
err = -EINVAL;
goto out_err;
}
/* Remove old maps */
maps__for_each_entry_safe(kmaps, old_map, next) {
/*
* We need to preserve eBPF maps even if they are
* covered by kcore, because we need to access
* eBPF dso for source data.
*/
if (old_map != map && !__map__is_bpf_prog(old_map))
maps__remove(kmaps, old_map);
}
machine->trampolines_mapped = false;
/* Find the kernel map using the '_stext' symbol */
if (!kallsyms__get_function_start(kallsyms_filename, "_stext", &stext)) {
list_for_each_entry(new_map, &md.maps, node) {
if (stext >= new_map->start && stext < new_map->end) {
replacement_map = new_map;
break;
}
}
}
if (!replacement_map)
replacement_map = list_entry(md.maps.next, struct map, node);
/* Add new maps */
while (!list_empty(&md.maps)) {
new_map = list_entry(md.maps.next, struct map, node);
list_del_init(&new_map->node);
if (new_map == replacement_map) {
map->start = new_map->start;
map->end = new_map->end;
map->pgoff = new_map->pgoff;
map->map_ip = new_map->map_ip;
map->unmap_ip = new_map->unmap_ip;
/* Ensure maps are correctly ordered */
map__get(map);
maps__remove(kmaps, map);
maps__insert(kmaps, map);
map__put(map);
map__put(new_map);
} else {
/*
* Merge kcore map into existing maps,
* and ensure that current maps (eBPF)
* stay intact.
*/
if (maps__merge_in(kmaps, new_map))
goto out_err;
}
}
if (machine__is(machine, "x86_64")) {
u64 addr;
/*
* If one of the corresponding symbols is there, assume the
* entry trampoline maps are too.
*/
if (!kallsyms__get_function_start(kallsyms_filename,
ENTRY_TRAMPOLINE_NAME,
&addr))
machine->trampolines_mapped = true;
}
/*
* Set the data type and long name so that kcore can be read via
* dso__data_read_addr().
*/
if (dso->kernel == DSO_SPACE__KERNEL_GUEST)
dso->binary_type = DSO_BINARY_TYPE__GUEST_KCORE;
else
dso->binary_type = DSO_BINARY_TYPE__KCORE;
dso__set_long_name(dso, strdup(kcore_filename), true);
close(fd);
if (map->prot & PROT_EXEC)
pr_debug("Using %s for kernel object code\n", kcore_filename);
else
pr_debug("Using %s for kernel data\n", kcore_filename);
return 0;
out_err:
while (!list_empty(&md.maps)) {
map = list_entry(md.maps.next, struct map, node);
list_del_init(&map->node);
map__put(map);
}
close(fd);
return -EINVAL;
}
/*
* If the kernel is relocated at boot time, kallsyms won't match. Compute the
* delta based on the relocation reference symbol.
*/
static int kallsyms__delta(struct kmap *kmap, const char *filename, u64 *delta)
{
u64 addr;
if (!kmap->ref_reloc_sym || !kmap->ref_reloc_sym->name)
return 0;
perf symbols: Accept symbols starting at address 0 That is the case of _text on s390, and we have some functions that return an address, using address zero to report problems, oops. This would lead the symbol loading routines to not use "_text" as the reference relocation symbol, or the first symbol for the kernel, but use instead "_stext", that is at the same address on x86_64 and others, but not on s390: [acme@localhost perf-4.11.0-rc6]$ head -15 /proc/kallsyms 0000000000000000 T _text 0000000000000418 t iplstart 0000000000000800 T start 000000000000080a t .base 000000000000082e t .sk8x8 0000000000000834 t .gotr 0000000000000842 t .cmd 0000000000000846 t .parm 000000000000084a t .lowcase 0000000000010000 T startup 0000000000010010 T startup_kdump 0000000000010214 t startup_kdump_relocated 0000000000011000 T startup_continue 00000000000112a0 T _ehead 0000000000100000 T _stext [acme@localhost perf-4.11.0-rc6]$ Which in turn would make 'perf test vmlinux' to fail because it wouldn't find the symbols before "_stext" in kallsyms. Fix it by using the return value only for errors and storing the address, when the symbol is successfully found, in a provided pointer arg. Before this patch: After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 40693 Looking at the vmlinux_path (8 entries long) Using /usr/lib/debug/lib/modules/3.10.0-654.el7.s390x/vmlinux for symbols ERR : 0: _text not on kallsyms ERR : 0x418: iplstart not on kallsyms ERR : 0x800: start not on kallsyms ERR : 0x80a: .base not on kallsyms ERR : 0x82e: .sk8x8 not on kallsyms ERR : 0x834: .gotr not on kallsyms ERR : 0x842: .cmd not on kallsyms ERR : 0x846: .parm not on kallsyms ERR : 0x84a: .lowcase not on kallsyms ERR : 0x10000: startup not on kallsyms ERR : 0x10010: startup_kdump not on kallsyms ERR : 0x10214: startup_kdump_relocated not on kallsyms ERR : 0x11000: startup_continue not on kallsyms ERR : 0x112a0: _ehead not on kallsyms <SNIP warnings> test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@localhost perf-4.11.0-rc6]$ After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 47160 <SNIP warnings> test child finished with 0 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@localhost perf-4.11.0-rc6]$ Reported-by: Michael Petlan <mpetlan@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9x9bwgd3btwdk1u51xie93fz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-28 08:21:09 +08:00
if (kallsyms__get_function_start(filename, kmap->ref_reloc_sym->name, &addr))
return -1;
*delta = addr - kmap->ref_reloc_sym->addr;
return 0;
}
int __dso__load_kallsyms(struct dso *dso, const char *filename,
struct map *map, bool no_kcore)
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
{
struct kmap *kmap = map__kmap(map);
u64 delta = 0;
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 20:53:51 +08:00
if (symbol__restricted_filename(filename, "/proc/kallsyms"))
return -1;
if (!kmap || !kmap->kmaps)
return -1;
if (dso__load_all_kallsyms(dso, filename) < 0)
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
return -1;
if (kallsyms__delta(kmap, filename, &delta))
return -1;
symbols__fixup_end(&dso->symbols);
symbols__fixup_duplicate(&dso->symbols);
if (dso->kernel == DSO_SPACE__KERNEL_GUEST)
dso->symtab_type = DSO_BINARY_TYPE__GUEST_KALLSYMS;
else
dso->symtab_type = DSO_BINARY_TYPE__KALLSYMS;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 00:48:56 +08:00
if (!no_kcore && !dso__load_kcore(dso, map, filename))
return maps__split_kallsyms_for_kcore(kmap->kmaps, dso);
else
return maps__split_kallsyms(kmap->kmaps, dso, delta, map);
}
int dso__load_kallsyms(struct dso *dso, const char *filename,
struct map *map)
{
return __dso__load_kallsyms(dso, filename, map, false);
}
static int dso__load_perf_map(const char *map_path, struct dso *dso)
{
char *line = NULL;
size_t n;
FILE *file;
int nr_syms = 0;
file = fopen(map_path, "r");
if (file == NULL)
goto out_failure;
while (!feof(file)) {
u64 start, size;
struct symbol *sym;
int line_len, len;
line_len = getline(&line, &n, file);
if (line_len < 0)
break;
if (!line)
goto out_failure;
line[--line_len] = '\0'; /* \n */
len = hex2u64(line, &start);
len++;
if (len + 2 >= line_len)
continue;
len += hex2u64(line + len, &size);
len++;
if (len + 2 >= line_len)
continue;
sym = symbol__new(start, size, STB_GLOBAL, STT_FUNC, line + len);
if (sym == NULL)
goto out_delete_line;
symbols__insert(&dso->symbols, sym);
nr_syms++;
}
free(line);
fclose(file);
return nr_syms;
out_delete_line:
free(line);
out_failure:
return -1;
}
#ifdef HAVE_LIBBFD_SUPPORT
#define PACKAGE 'perf'
#include <bfd.h>
static int bfd_symbols__cmpvalue(const void *a, const void *b)
{
const asymbol *as = *(const asymbol **)a, *bs = *(const asymbol **)b;
if (bfd_asymbol_value(as) != bfd_asymbol_value(bs))
return bfd_asymbol_value(as) - bfd_asymbol_value(bs);
return bfd_asymbol_name(as)[0] - bfd_asymbol_name(bs)[0];
}
static int bfd2elf_binding(asymbol *symbol)
{
if (symbol->flags & BSF_WEAK)
return STB_WEAK;
if (symbol->flags & BSF_GLOBAL)
return STB_GLOBAL;
if (symbol->flags & BSF_LOCAL)
return STB_LOCAL;
return -1;
}
int dso__load_bfd_symbols(struct dso *dso, const char *debugfile)
{
int err = -1;
long symbols_size, symbols_count, i;
asection *section;
asymbol **symbols, *sym;
struct symbol *symbol;
bfd *abfd;
u64 start, len;
perf symbols: Make dso__load_bfd_symbols() load PE files from debug cache only dso__load_bfd_symbols() attempts to load a DSO at its original path, then closes it and loads the file in the debug cache. This is incorrect. It should ignore the original file and work with only the debug cache. The original file may have changed or may not even exist, for example if the debug cache has been transferred to another machine via "perf archive". This fix makes it only load the file in the debug cache. Further notes from Nicholas: dso__load_bfd_symbols() is called in a loop from dso__load() for a variety of paths. These are generated by the various DSO_BINARY_TYPEs in the binary_type_symtab list at the top of util/symbol.c. In each case the debugfile passed to dso__load_bfd_symbols() is the path to try. One of those iterations (the first one I believe) passes the original path as the debugfile. If the file still exists at the original path, this is the one that ends up being used in case the debugcache was deleted or the PE file doesn't have a build-id. A later iteration (BUILD_ID_CACHE) passes debugfile as the file in the debugcache if it has a build-id. Even if the file was previously loaded at its original path, (if I understand correctly) this load will override it so the debugcache file ends up being used. Committer notes: So if it fails to find in the cache, it will eventually hope for the best and look at the path in the local filesystem, which in many cases is enough. At some point we need to switch from this "hope for the best" approach to one that warns the user that there is no guarantee, if no buildid is present, that just by looking at the pathname the symbolisation will work. Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Huw Davies <huw@codeweavers.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Song Liu <songliubraving@fb.com> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: http://lore.kernel.org/lkml/e58e1237-94ab-e1c9-a7b9-473531906954@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-11 03:17:38 +08:00
abfd = bfd_openr(debugfile, NULL);
if (!abfd)
return -1;
if (!bfd_check_format(abfd, bfd_object)) {
pr_debug2("%s: cannot read %s bfd file.\n", __func__,
dso->long_name);
goto out_close;
}
if (bfd_get_flavour(abfd) == bfd_target_elf_flavour)
goto out_close;
section = bfd_get_section_by_name(abfd, ".text");
if (section)
dso->text_offset = section->vma - section->filepos;
symbols_size = bfd_get_symtab_upper_bound(abfd);
if (symbols_size == 0) {
bfd_close(abfd);
return 0;
}
if (symbols_size < 0)
goto out_close;
symbols = malloc(symbols_size);
if (!symbols)
goto out_close;
symbols_count = bfd_canonicalize_symtab(abfd, symbols);
if (symbols_count < 0)
goto out_free;
qsort(symbols, symbols_count, sizeof(asymbol *), bfd_symbols__cmpvalue);
#ifdef bfd_get_section
#define bfd_asymbol_section bfd_get_section
#endif
for (i = 0; i < symbols_count; ++i) {
sym = symbols[i];
section = bfd_asymbol_section(sym);
if (bfd2elf_binding(sym) < 0)
continue;
while (i + 1 < symbols_count &&
bfd_asymbol_section(symbols[i + 1]) == section &&
bfd2elf_binding(symbols[i + 1]) < 0)
i++;
if (i + 1 < symbols_count &&
bfd_asymbol_section(symbols[i + 1]) == section)
len = symbols[i + 1]->value - sym->value;
else
len = section->size - sym->value;
start = bfd_asymbol_value(sym) - dso->text_offset;
symbol = symbol__new(start, len, bfd2elf_binding(sym), STT_FUNC,
bfd_asymbol_name(sym));
if (!symbol)
goto out_free;
symbols__insert(&dso->symbols, symbol);
}
#ifdef bfd_get_section
#undef bfd_asymbol_section
#endif
symbols__fixup_end(&dso->symbols);
symbols__fixup_duplicate(&dso->symbols);
dso->adjust_symbols = 1;
err = 0;
out_free:
free(symbols);
out_close:
bfd_close(abfd);
return err;
}
#endif
static bool dso__is_compatible_symtab_type(struct dso *dso, bool kmod,
enum dso_binary_type type)
{
switch (type) {
case DSO_BINARY_TYPE__JAVA_JIT:
case DSO_BINARY_TYPE__DEBUGLINK:
case DSO_BINARY_TYPE__SYSTEM_PATH_DSO:
case DSO_BINARY_TYPE__FEDORA_DEBUGINFO:
case DSO_BINARY_TYPE__UBUNTU_DEBUGINFO:
perf symbols: Fix debuginfo search for Ubuntu Reportedly, from 19.10 Ubuntu has begun mixing up the location of some debug symbol files, putting files expected to be in /usr/lib/debug/usr/lib into /usr/lib/debug/lib instead. Fix by adding another dso_binary_type. Example on Ubuntu 20.04 Before: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data ] $ perf script --call-trace | head -5 uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%) uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4100 uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4df0 uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4e18 uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc5128 After: $ perf script --call-trace | head -5 uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%) uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _start uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start Reported-by: Travis Downs <travis.downs@gmail.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200526155207.9172-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-26 23:52:07 +08:00
case DSO_BINARY_TYPE__MIXEDUP_UBUNTU_DEBUGINFO:
case DSO_BINARY_TYPE__BUILDID_DEBUGINFO:
case DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO:
return !kmod && dso->kernel == DSO_SPACE__USER;
case DSO_BINARY_TYPE__KALLSYMS:
case DSO_BINARY_TYPE__VMLINUX:
case DSO_BINARY_TYPE__KCORE:
return dso->kernel == DSO_SPACE__KERNEL;
case DSO_BINARY_TYPE__GUEST_KALLSYMS:
case DSO_BINARY_TYPE__GUEST_VMLINUX:
case DSO_BINARY_TYPE__GUEST_KCORE:
return dso->kernel == DSO_SPACE__KERNEL_GUEST;
case DSO_BINARY_TYPE__GUEST_KMODULE:
case DSO_BINARY_TYPE__GUEST_KMODULE_COMP:
case DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE:
case DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP:
/*
* kernel modules know their symtab type - it's set when
* creating a module dso in machine__addnew_module_map().
*/
return kmod && dso->symtab_type == type;
case DSO_BINARY_TYPE__BUILD_ID_CACHE:
case DSO_BINARY_TYPE__BUILD_ID_CACHE_DEBUGINFO:
return true;
perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO Introduce a new dso type DSO_BINARY_TYPE__BPF_PROG_INFO for BPF programs. In symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso will call into a new function symbol__disassemble_bpf() in an upcoming patch, where annotation line information is filled based bpf_prog_info and btf saved in given perf_env. Committer notes: Removed the unnamed union with 'bpf_prog' and 'cache' in 'struct dso', to fix this bug when exiting 'perf top': # perf top perf: Segmentation fault -------- backtrace -------- perf[0x5a785a] /lib64/libc.so.6(+0x385bf)[0x7fd68443c5bf] perf(rb_first+0x2b)[0x4d6eeb] perf(dso__delete+0xb7)[0x4dffb7] perf[0x4f9e37] perf(perf_session__delete+0x64)[0x504df4] perf(cmd_top+0x1957)[0x454467] perf[0x4aad18] perf(main+0x61c)[0x42ec7c] /lib64/libc.so.6(__libc_start_main+0xf2)[0x7fd684428412] perf(_start+0x2d)[0x42eead] # # addr2line -fe ~/bin/perf 0x4dffb7 dso_cache__free /home/acme/git/perf/tools/perf/util/dso.c:713 That is trying to access the dso->data.cache, and that is not used with BPF programs, so we end up accessing what is in bpf_prog.first_member, b00m. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com [ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 13:30:48 +08:00
case DSO_BINARY_TYPE__BPF_PROG_INFO:
case DSO_BINARY_TYPE__BPF_IMAGE:
case DSO_BINARY_TYPE__OOL:
case DSO_BINARY_TYPE__NOT_FOUND:
default:
return false;
}
}
/* Checks for the existence of the perf-<pid>.map file in two different
* locations. First, if the process is a separate mount namespace, check in
* that namespace using the pid of the innermost pid namespace. If's not in a
* namespace, or the file can't be found there, try in the mount namespace of
* the tracing process using our view of its pid.
*/
static int dso__find_perf_map(char *filebuf, size_t bufsz,
struct nsinfo **nsip)
{
struct nscookie nsc;
struct nsinfo *nsi;
struct nsinfo *nnsi;
int rc = -1;
nsi = *nsip;
if (nsi->need_setns) {
snprintf(filebuf, bufsz, "/tmp/perf-%d.map", nsi->nstgid);
nsinfo__mountns_enter(nsi, &nsc);
rc = access(filebuf, R_OK);
nsinfo__mountns_exit(&nsc);
if (rc == 0)
return rc;
}
nnsi = nsinfo__copy(nsi);
if (nnsi) {
nsinfo__put(nsi);
nnsi->need_setns = false;
snprintf(filebuf, bufsz, "/tmp/perf-%d.map", nnsi->tgid);
*nsip = nnsi;
rc = 0;
}
return rc;
}
int dso__load(struct dso *dso, struct map *map)
{
char *name;
int ret = -1;
u_int i;
struct machine *machine = NULL;
char *root_dir = (char *) "";
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
int ss_pos = 0;
struct symsrc ss_[2];
struct symsrc *syms_ss = NULL, *runtime_ss = NULL;
bool kmod;
bool perfmap;
struct build_id bid;
struct nscookie nsc;
char newmapname[PATH_MAX];
const char *map_path = dso->long_name;
perfmap = strncmp(dso->name, "/tmp/perf-", 10) == 0;
if (perfmap) {
if (dso->nsinfo && (dso__find_perf_map(newmapname,
sizeof(newmapname), &dso->nsinfo) == 0)) {
map_path = newmapname;
}
}
nsinfo__mountns_enter(dso->nsinfo, &nsc);
pthread_mutex_lock(&dso->lock);
/* check again under the dso->lock */
if (dso__loaded(dso)) {
ret = 1;
goto out;
}
perf symbols: Don't try to find a vmlinux file when looking for kernel modules The dso->kernel value is now set to everything that is in machine->kmaps, but that was being used to decide if vmlinux lookup is needed, which ended up making that lookup be made for kernel modules, that now have dso->kernel set, leading to these kinds of warnings when running on a machine with compressed kernel modules, like fedora:31: [root@five ~]# perf record -F 10000 -a sleep 2 [ perf record: Woken up 1 times to write data ] lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' [ perf record: Captured and wrote 1.024 MB perf.data (1366 samples) ] [root@five ~]# This happens when collecting the buildid, when we find samples for kernel modules, fix it by checking if the looked up DSO is a kernel module by other means. Fixes: 02213cec64bb ("perf maps: Mark module DSOs with kernel type") Tested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200302191007.GD10335@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-03 03:03:34 +08:00
kmod = dso->symtab_type == DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE ||
dso->symtab_type == DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP ||
dso->symtab_type == DSO_BINARY_TYPE__GUEST_KMODULE ||
dso->symtab_type == DSO_BINARY_TYPE__GUEST_KMODULE_COMP;
if (dso->kernel && !kmod) {
if (dso->kernel == DSO_SPACE__KERNEL)
ret = dso__load_kernel_sym(dso, map);
else if (dso->kernel == DSO_SPACE__KERNEL_GUEST)
ret = dso__load_guest_kernel_sym(dso, map);
machine = map__kmaps(map)->machine;
if (machine__is(machine, "x86_64"))
machine__map_x86_64_entry_trampolines(machine, dso);
goto out;
}
dso->adjust_symbols = 0;
if (perfmap) {
ret = dso__load_perf_map(map_path, dso);
dso->symtab_type = ret > 0 ? DSO_BINARY_TYPE__JAVA_JIT :
DSO_BINARY_TYPE__NOT_FOUND;
goto out;
}
if (machine)
root_dir = machine->root_dir;
name = malloc(PATH_MAX);
if (!name)
goto out;
/*
* Read the build id if possible. This is required for
* DSO_BINARY_TYPE__BUILDID_DEBUGINFO to work
*/
perf diff: Do not overwrite valid build id Fixes a perf diff regression issue which was introduced by commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") The binary name could be same when perf diff different binaries. Build id is used to distinguish between them. However, the previous patch assumes the same binary name has same build id. So it overwrites the build id according to the binary name, regardless of whether the build id is set or not. Check the has_build_id in dso__load. If the build id is already set, use it. Before the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% -99.80% tchain_edit [.] f2 0.12% +99.81% tchain_edit [.] f3 0.02% -0.01% [ixgbe] [k] ixgbe_read_reg After the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% +0.10% tchain_edit [.] f3 0.12% -0.08% tchain_edit [.] f2 Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> CC: Dima Kogan <dima@secretsauce.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-13 23:29:44 +08:00
if (!dso->has_build_id &&
perf symbols: Take into account symfs setting when reading file build ID After commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") and when --symfs option is used perf failed to pick up symbols for file with the same name between host and sysroot specified by --symfs option. One can see message like this: bin/bash with build id 26f0062cb6950d4d1ab0fd9c43eae8b10ca42062 not found, continuing without symbols It happens because code added by 5baecbcd9c9a opens files directly by dso->long_name without symbol_conf.symfs consideration, which as result picks one from the host. It reads its build ID and later even code finds another proper file in directory pointed by --symfs perf ignores it because build id mismatches. Fix is to use __symbol__join_symfs to adjust file name according to --symfs setting. If no --symfs passed the operation would noop and picks the same host file as before. Also note in latter tree after 5baecbcd9c9a commit additional check for '!dso->has_build_id' was added, so to observe error condition 'perf record' should run with --no-buildid, so perf.data itself would not have build id for target binary in buildid perf section and 'perf report' will pass '!dso->has_build_id' condition. Or target binary should not have build id, but the same binary on host has build id, again '!dso->has_build_id' will pass in this case and incorrect build id could be read if --symfs is used. Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Phlipot <cphlipot0@gmail.com> Cc: Dima Kogan <dima@secretsauce.net> Cc: He Kuang <hekuang@huawei.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: xe-linux-external@cisco.com Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1486424908-17094-1-git-send-email-kamensky@cisco.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-07 07:48:28 +08:00
is_regular_file(dso->long_name)) {
__symbol__join_symfs(name, PATH_MAX, dso->long_name);
if (filename__read_build_id(name, &bid) > 0)
dso__set_build_id(dso, &bid);
perf symbols: Take into account symfs setting when reading file build ID After commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") and when --symfs option is used perf failed to pick up symbols for file with the same name between host and sysroot specified by --symfs option. One can see message like this: bin/bash with build id 26f0062cb6950d4d1ab0fd9c43eae8b10ca42062 not found, continuing without symbols It happens because code added by 5baecbcd9c9a opens files directly by dso->long_name without symbol_conf.symfs consideration, which as result picks one from the host. It reads its build ID and later even code finds another proper file in directory pointed by --symfs perf ignores it because build id mismatches. Fix is to use __symbol__join_symfs to adjust file name according to --symfs setting. If no --symfs passed the operation would noop and picks the same host file as before. Also note in latter tree after 5baecbcd9c9a commit additional check for '!dso->has_build_id' was added, so to observe error condition 'perf record' should run with --no-buildid, so perf.data itself would not have build id for target binary in buildid perf section and 'perf report' will pass '!dso->has_build_id' condition. Or target binary should not have build id, but the same binary on host has build id, again '!dso->has_build_id' will pass in this case and incorrect build id could be read if --symfs is used. Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Phlipot <cphlipot0@gmail.com> Cc: Dima Kogan <dima@secretsauce.net> Cc: He Kuang <hekuang@huawei.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: xe-linux-external@cisco.com Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1486424908-17094-1-git-send-email-kamensky@cisco.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-07 07:48:28 +08:00
}
/*
* Iterate over candidate debug images.
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
* Keep track of "interesting" ones (those which have a symtab, dynsym,
* and/or opd section) for processing.
*/
for (i = 0; i < DSO_BINARY_TYPE__SYMTAB_CNT; i++) {
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
struct symsrc *ss = &ss_[ss_pos];
bool next_slot = false;
bool is_reg;
bool nsexit;
int bfdrc = -1;
int sirc = -1;
enum dso_binary_type symtab_type = binary_type_symtab[i];
nsexit = (symtab_type == DSO_BINARY_TYPE__BUILD_ID_CACHE ||
symtab_type == DSO_BINARY_TYPE__BUILD_ID_CACHE_DEBUGINFO);
if (!dso__is_compatible_symtab_type(dso, kmod, symtab_type))
continue;
if (dso__read_binary_type_filename(dso, symtab_type,
root_dir, name, PATH_MAX))
continue;
if (nsexit)
nsinfo__mountns_exit(&nsc);
is_reg = is_regular_file(name);
#ifdef HAVE_LIBBFD_SUPPORT
if (is_reg)
bfdrc = dso__load_bfd_symbols(dso, name);
#endif
if (is_reg && bfdrc < 0)
sirc = symsrc__init(ss, dso, name, symtab_type);
if (nsexit)
nsinfo__mountns_enter(dso->nsinfo, &nsc);
if (bfdrc == 0) {
ret = 0;
break;
}
if (!is_reg || sirc < 0)
continue;
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
if (!syms_ss && symsrc__has_symtab(ss)) {
syms_ss = ss;
next_slot = true;
if (!dso->symsrc_filename)
dso->symsrc_filename = strdup(name);
}
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
if (!runtime_ss && symsrc__possibly_runtime(ss)) {
runtime_ss = ss;
next_slot = true;
}
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
if (next_slot) {
ss_pos++;
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
if (syms_ss && runtime_ss)
break;
} else {
symsrc__destroy(ss);
}
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
}
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
if (!runtime_ss && !syms_ss)
goto out_free;
if (runtime_ss && !syms_ss) {
syms_ss = runtime_ss;
}
/* We'll have to hope for the best */
if (!runtime_ss && syms_ss)
runtime_ss = syms_ss;
if (syms_ss)
ret = dso__load_sym(dso, map, syms_ss, runtime_ss, kmod);
else
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
ret = -1;
perf symbols: Fix builds with NO_LIBELF set Build currently fails: $ make -C tools/perf O=/tmp/pbuild NO_LIBELF=1 util/symbol.c: In function ‘dso__load’: util/symbol.c:1128:27: error: ‘struct symsrc’ has no member named ‘dynsym’ CC /tmp/pbuild/util/pager.o make: *** [/tmp/pbuild/util/symbol.o] Error 1 make: *** Waiting for unfinished jobs.... Moving the dynsym reference to symbol-elf.c reveals that NO_LIBELF requires NO_LIBUNWIND: $ make -C tools/perf O=/tmp/pbuild NO_LIBELF=1 LINK /tmp/pbuild/perf /tmp/pbuild/libperf.a(unwind.o): In function `elf_section_offset': /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:176: undefined reference to `elf_begin' /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:181: undefined reference to `gelf_getehdr' /tmp/pbuild/libperf.a(unwind.o): In function `elf_section_by_name': /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:157: undefined reference to `elf_nextscn' /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:160: undefined reference to `gelf_getshdr' /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:161: undefined reference to `elf_strptr' /tmp/pbuild/libperf.a(unwind.o): In function `elf_section_offset': /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:190: undefined reference to `elf_end' /tmp/pbuild/libperf.a(unwind.o): In function `read_unwind_spec': /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:190: undefined reference to `elf_end' collect2: ld returned 1 exit status make: *** [/tmp/pbuild/perf] Error 1 make: Leaving directory `/opt/sw/ahern/perf.git/tools/perf' This patch fixes both. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1345391234-71906-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-19 23:47:14 +08:00
if (ret > 0) {
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
int nr_plt;
nr_plt = dso__synthesize_plt_symbols(dso, runtime_ss);
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
if (nr_plt > 0)
ret += nr_plt;
}
perf symbols: Use both runtime and debug images We keep both a 'runtime' elf image as well as a 'debug' elf image around and generate symbols by looking at both of these. This eliminates the need for the want_symtab/goto restart mechanism combined with iterating over and reopening the elf images a second time. Also give dso__synthsize_plt_symbols() the runtime image (which has dynsyms) instead of the symbol image (which may only have a symtab and no dynsyms). Previously if a debug image was found all runtime images were ignored. This fixes 2 issues: - Symbol resolution to failure on PowerPC systems with debug symbols installed, as the debug images lack a '.opd' section which contains function descriptors. - On all archs, plt synthesis failed when a debug image was loaded and that debug image lacks a dynsym section while a runtime image has a dynsym section. Assumptions: - If a .opd section exists, it is contained in the highest priority image with a dynsym section. - This generally implies that the debug image lacks a dynsym section (ie: it is marked as NO_BITS). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-11 06:23:02 +08:00
for (; ss_pos > 0; ss_pos--)
symsrc__destroy(&ss_[ss_pos - 1]);
out_free:
free(name);
if (ret < 0 && strstr(dso->name, " (deleted)") != NULL)
ret = 0;
out:
dso__set_loaded(dso);
pthread_mutex_unlock(&dso->lock);
nsinfo__mountns_exit(&nsc);
return ret;
}
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
static int map__strcmp(const void *a, const void *b)
{
const struct map *ma = *(const struct map **)a, *mb = *(const struct map **)b;
return strcmp(ma->dso->short_name, mb->dso->short_name);
}
static int map__strcmp_name(const void *name, const void *b)
{
const struct map *map = *(const struct map **)b;
return strcmp(name, map->dso->short_name);
}
void __maps__sort_by_name(struct maps *maps)
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
{
qsort(maps->maps_by_name, maps->nr_maps, sizeof(struct map *), map__strcmp);
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
}
static int map__groups__sort_by_name_from_rbtree(struct maps *maps)
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
{
struct map *map;
struct map **maps_by_name = realloc(maps->maps_by_name, maps->nr_maps * sizeof(map));
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
int i = 0;
if (maps_by_name == NULL)
return -1;
maps->maps_by_name = maps_by_name;
maps->nr_maps_allocated = maps->nr_maps;
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
maps__for_each_entry(maps, map)
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
maps_by_name[i++] = map;
__maps__sort_by_name(maps);
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
return 0;
}
static struct map *__maps__find_by_name(struct maps *maps, const char *name)
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
{
struct map **mapp;
if (maps->maps_by_name == NULL &&
map__groups__sort_by_name_from_rbtree(maps))
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
return NULL;
mapp = bsearch(name, maps->maps_by_name, maps->nr_maps, sizeof(*mapp), map__strcmp_name);
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
if (mapp)
return *mapp;
return NULL;
}
struct map *maps__find_by_name(struct maps *maps, const char *name)
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 14:29:58 +08:00
{
struct map *map;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 14:29:58 +08:00
down_read(&maps->lock);
if (maps->last_search_by_name && strcmp(maps->last_search_by_name->dso->short_name, name) == 0) {
map = maps->last_search_by_name;
perf map_groups: Add a front end cache for map lookups by name Lets see if it helps: First look at the probeable lines for the function that does lookups by name in a map_groups struct: # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } 12 maps__for_each_entry(maps, map) 13 if (strcmp(map->dso->short_name, name) == 0) { 14 mg->last_search_by_name = map; 15 goto out_unlock; } 18 map = NULL; out_unlock: 21 up_read(&maps->lock); 22 return map; 23 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # Now add a probe to the place where we reuse the last search: # perf probe -x ~/bin/perf map_groups__find_by_name:8 Added new event: probe_perf:map_groups__find_by_name (on map_groups__find_by_name:8 in /home/acme/bin/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:map_groups__find_by_name -aR sleep 1 # Now lets do a system wide 'perf stat' counting those events: # perf stat -e probe_perf:* Leave it running and lets do a 'perf top', then, after a while, stop the 'perf stat': # perf stat -e probe_perf:* ^C Performance counter stats for 'system wide': 3,603 probe_perf:map_groups__find_by_name 44.565253139 seconds time elapsed # yeah, good to have. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-tcz37g3nxv3tvxw3q90vga3p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-14 03:33:33 +08:00
goto out_unlock;
}
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
/*
* If we have maps->maps_by_name, then the name isn't in the rbtree,
* as maps->maps_by_name mirrors the rbtree when lookups by name are
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
* made.
*/
map = __maps__find_by_name(maps, name);
if (map || maps->maps_by_name != NULL)
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
goto out_unlock;
perf map_groups: Add a front end cache for map lookups by name Lets see if it helps: First look at the probeable lines for the function that does lookups by name in a map_groups struct: # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } 12 maps__for_each_entry(maps, map) 13 if (strcmp(map->dso->short_name, name) == 0) { 14 mg->last_search_by_name = map; 15 goto out_unlock; } 18 map = NULL; out_unlock: 21 up_read(&maps->lock); 22 return map; 23 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # Now add a probe to the place where we reuse the last search: # perf probe -x ~/bin/perf map_groups__find_by_name:8 Added new event: probe_perf:map_groups__find_by_name (on map_groups__find_by_name:8 in /home/acme/bin/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:map_groups__find_by_name -aR sleep 1 # Now lets do a system wide 'perf stat' counting those events: # perf stat -e probe_perf:* Leave it running and lets do a 'perf top', then, after a while, stop the 'perf stat': # perf stat -e probe_perf:* ^C Performance counter stats for 'system wide': 3,603 probe_perf:map_groups__find_by_name 44.565253139 seconds time elapsed # yeah, good to have. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-tcz37g3nxv3tvxw3q90vga3p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-14 03:33:33 +08:00
perf map_groups: Auto sort maps by name, if needed There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-17 22:38:13 +08:00
/* Fallback to traversing the rbtree... */
2019-11-14 03:16:25 +08:00
maps__for_each_entry(maps, map)
perf map_groups: Add a front end cache for map lookups by name Lets see if it helps: First look at the probeable lines for the function that does lookups by name in a map_groups struct: # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } 12 maps__for_each_entry(maps, map) 13 if (strcmp(map->dso->short_name, name) == 0) { 14 mg->last_search_by_name = map; 15 goto out_unlock; } 18 map = NULL; out_unlock: 21 up_read(&maps->lock); 22 return map; 23 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # Now add a probe to the place where we reuse the last search: # perf probe -x ~/bin/perf map_groups__find_by_name:8 Added new event: probe_perf:map_groups__find_by_name (on map_groups__find_by_name:8 in /home/acme/bin/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:map_groups__find_by_name -aR sleep 1 # Now lets do a system wide 'perf stat' counting those events: # perf stat -e probe_perf:* Leave it running and lets do a 'perf top', then, after a while, stop the 'perf stat': # perf stat -e probe_perf:* ^C Performance counter stats for 'system wide': 3,603 probe_perf:map_groups__find_by_name 44.565253139 seconds time elapsed # yeah, good to have. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-tcz37g3nxv3tvxw3q90vga3p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-14 03:33:33 +08:00
if (strcmp(map->dso->short_name, name) == 0) {
maps->last_search_by_name = map;
goto out_unlock;
perf map_groups: Add a front end cache for map lookups by name Lets see if it helps: First look at the probeable lines for the function that does lookups by name in a map_groups struct: # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } 12 maps__for_each_entry(maps, map) 13 if (strcmp(map->dso->short_name, name) == 0) { 14 mg->last_search_by_name = map; 15 goto out_unlock; } 18 map = NULL; out_unlock: 21 up_read(&maps->lock); 22 return map; 23 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # Now add a probe to the place where we reuse the last search: # perf probe -x ~/bin/perf map_groups__find_by_name:8 Added new event: probe_perf:map_groups__find_by_name (on map_groups__find_by_name:8 in /home/acme/bin/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:map_groups__find_by_name -aR sleep 1 # Now lets do a system wide 'perf stat' counting those events: # perf stat -e probe_perf:* Leave it running and lets do a 'perf top', then, after a while, stop the 'perf stat': # perf stat -e probe_perf:* ^C Performance counter stats for 'system wide': 3,603 probe_perf:map_groups__find_by_name 44.565253139 seconds time elapsed # yeah, good to have. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-tcz37g3nxv3tvxw3q90vga3p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-14 03:33:33 +08:00
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 14:29:58 +08:00
map = NULL;
out_unlock:
up_read(&maps->lock);
return map;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 14:29:58 +08:00
}
int dso__load_vmlinux(struct dso *dso, struct map *map,
const char *vmlinux, bool vmlinux_allocated)
{
int err = -1;
struct symsrc ss;
char symfs_vmlinux[PATH_MAX];
enum dso_binary_type symtab_type;
if (vmlinux[0] == '/')
snprintf(symfs_vmlinux, sizeof(symfs_vmlinux), "%s", vmlinux);
else
symbol__join_symfs(symfs_vmlinux, vmlinux);
if (dso->kernel == DSO_SPACE__KERNEL_GUEST)
symtab_type = DSO_BINARY_TYPE__GUEST_VMLINUX;
else
symtab_type = DSO_BINARY_TYPE__VMLINUX;
if (symsrc__init(&ss, dso, symfs_vmlinux, symtab_type))
return -1;
err = dso__load_sym(dso, map, &ss, &ss, 0);
symsrc__destroy(&ss);
if (err > 0) {
if (dso->kernel == DSO_SPACE__KERNEL_GUEST)
dso->binary_type = DSO_BINARY_TYPE__GUEST_VMLINUX;
else
dso->binary_type = DSO_BINARY_TYPE__VMLINUX;
dso__set_long_name(dso, vmlinux, vmlinux_allocated);
dso__set_loaded(dso);
pr_debug("Using %s for symbols\n", symfs_vmlinux);
}
return err;
}
int dso__load_vmlinux_path(struct dso *dso, struct map *map)
{
int i, err = 0;
perf record: Do not save pathname in ./debug/.build-id directory for vmlinux When perf record finishes a session, it pre-processes samples in order to write build-id info from DSOs that had samples. During this process it'll call map__load() for the kernel map, and it ends up calling dso__load_vmlinux_path() which replaces dso->long_name. But this function checks kernel's build-id before searching vmlinux path so it'll end up with a cryptic name, the pathname for the entry in the ~/.debug cache, which can be confusing to users. This patch adds a flag to skip the build-id check during record, so that it'll have the original vmlinux path for the kernel dso->long_name, not the entry in the ~/.debug cache. Before: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.196 MB perf.data (~8545 samples) ] Looking at the vmlinux_path (7 entries long) Using /home/namhyung/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551 for symbols After: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.193 MB perf.data (~8432 samples) ] Looking at the vmlinux_path (7 entries long) Using /lib/modules/3.16.4-1-ARCH/build/vmlinux for symbols Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1415063674-17206-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-04 09:14:32 +08:00
char *filename = NULL;
perf symbols: Try the .debug/ DSO cache as a last resort Not as the first attempt at finding a vmlinux for the running kernel, this way we get a more informative filename to present in tools, it will check that the build-id is the same as the one previously loaded in the DSO in dso->build_id, reading from /sys/kernel/notes, for instance. E.g. in the annotation TUI, going from 'perf top', for the scsi_sg_alloc kernel function, in the first line: Before: scsi_sg_alloc /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 After: scsi_sg_alloc /lib/modules/4.3.0-rc1+/build/vmlinux And: # ls -la /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 lrwxrwxrwx. 1 root root 81 Sep 22 16:11 /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 -> ../../home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 # file ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped # The same as: # file /lib/modules/4.3.0-rc1+/build/vmlinux /lib/modules/4.3.0-rc1+/build/vmlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped Furthermore: # sha256sum /lib/modules/4.3.0-rc1+/build/vmlinux e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /lib/modules/4.3.0-rc1+/build/vmlinux # sha256sum ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 [root@zoo new]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9y42ikzq3jisiddoi6f07n8z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-12 04:17:24 +08:00
pr_debug("Looking at the vmlinux_path (%d entries long)\n",
vmlinux_path__nr_entries + 1);
for (i = 0; i < vmlinux_path__nr_entries; ++i) {
err = dso__load_vmlinux(dso, map, vmlinux_path[i], false);
perf symbols: Try the .debug/ DSO cache as a last resort Not as the first attempt at finding a vmlinux for the running kernel, this way we get a more informative filename to present in tools, it will check that the build-id is the same as the one previously loaded in the DSO in dso->build_id, reading from /sys/kernel/notes, for instance. E.g. in the annotation TUI, going from 'perf top', for the scsi_sg_alloc kernel function, in the first line: Before: scsi_sg_alloc /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 After: scsi_sg_alloc /lib/modules/4.3.0-rc1+/build/vmlinux And: # ls -la /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 lrwxrwxrwx. 1 root root 81 Sep 22 16:11 /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 -> ../../home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 # file ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped # The same as: # file /lib/modules/4.3.0-rc1+/build/vmlinux /lib/modules/4.3.0-rc1+/build/vmlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped Furthermore: # sha256sum /lib/modules/4.3.0-rc1+/build/vmlinux e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /lib/modules/4.3.0-rc1+/build/vmlinux # sha256sum ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 [root@zoo new]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9y42ikzq3jisiddoi6f07n8z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-12 04:17:24 +08:00
if (err > 0)
goto out;
}
perf record: Do not save pathname in ./debug/.build-id directory for vmlinux When perf record finishes a session, it pre-processes samples in order to write build-id info from DSOs that had samples. During this process it'll call map__load() for the kernel map, and it ends up calling dso__load_vmlinux_path() which replaces dso->long_name. But this function checks kernel's build-id before searching vmlinux path so it'll end up with a cryptic name, the pathname for the entry in the ~/.debug cache, which can be confusing to users. This patch adds a flag to skip the build-id check during record, so that it'll have the original vmlinux path for the kernel dso->long_name, not the entry in the ~/.debug cache. Before: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.196 MB perf.data (~8545 samples) ] Looking at the vmlinux_path (7 entries long) Using /home/namhyung/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551 for symbols After: # perf record -va sleep 3 mmap size 528384B [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.193 MB perf.data (~8432 samples) ] Looking at the vmlinux_path (7 entries long) Using /lib/modules/3.16.4-1-ARCH/build/vmlinux for symbols Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1415063674-17206-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-04 09:14:32 +08:00
if (!symbol_conf.ignore_vmlinux_buildid)
filename = dso__build_id_filename(dso, NULL, 0, false);
if (filename != NULL) {
err = dso__load_vmlinux(dso, map, filename, true);
if (err > 0)
goto out;
free(filename);
}
out:
return err;
}
static bool visible_dir_filter(const char *name, struct dirent *d)
{
if (d->d_type != DT_DIR)
return false;
return lsdir_no_dot_filter(name, d);
}
static int find_matching_kcore(struct map *map, char *dir, size_t dir_sz)
{
char kallsyms_filename[PATH_MAX];
int ret = -1;
struct strlist *dirs;
struct str_node *nd;
dirs = lsdir(dir, visible_dir_filter);
if (!dirs)
return -1;
strlist__for_each_entry(nd, dirs) {
scnprintf(kallsyms_filename, sizeof(kallsyms_filename),
"%s/%s/kallsyms", dir, nd->s);
if (!validate_kcore_addresses(kallsyms_filename, map)) {
strlcpy(dir, kallsyms_filename, dir_sz);
ret = 0;
break;
}
}
strlist__delete(dirs);
return ret;
}
/*
* Use open(O_RDONLY) to check readability directly instead of access(R_OK)
* since access(R_OK) only checks with real UID/GID but open() use effective
* UID/GID and actual capabilities (e.g. /proc/kcore requires CAP_SYS_RAWIO).
*/
static bool filename__readable(const char *file)
{
int fd = open(file, O_RDONLY);
if (fd < 0)
return false;
close(fd);
return true;
}
static char *dso__find_kallsyms(struct dso *dso, struct map *map)
{
struct build_id bid;
char sbuild_id[SBUILD_ID_SIZE];
bool is_host = false;
char path[PATH_MAX];
if (!dso->has_build_id) {
/*
* Last resort, if we don't have a build-id and couldn't find
* any vmlinux file, try the running kernel kallsyms table.
*/
goto proc_kallsyms;
}
if (sysfs__read_build_id("/sys/kernel/notes", &bid) == 0)
is_host = dso__build_id_equal(dso, &bid);
/* Try a fast path for /proc/kallsyms if possible */
if (is_host) {
/*
* Do not check the build-id cache, unless we know we cannot use
* /proc/kcore or module maps don't match to /proc/kallsyms.
* To check readability of /proc/kcore, do not use access(R_OK)
* since /proc/kcore requires CAP_SYS_RAWIO to read and access
* can't check it.
*/
if (filename__readable("/proc/kcore") &&
!validate_kcore_addresses("/proc/kallsyms", map))
goto proc_kallsyms;
}
build_id__sprintf(&dso->bid, sbuild_id);
/* Find kallsyms in build-id cache with kcore */
scnprintf(path, sizeof(path), "%s/%s/%s",
buildid_dir, DSO__NAME_KCORE, sbuild_id);
if (!find_matching_kcore(map, path, sizeof(path)))
return strdup(path);
/* Use current /proc/kallsyms if possible */
if (is_host) {
proc_kallsyms:
return strdup("/proc/kallsyms");
}
/* Finally, find a cache of kallsyms */
if (!build_id_cache__kallsyms_path(sbuild_id, path, sizeof(path))) {
pr_err("No kallsyms or vmlinux with build-id %s was found\n",
sbuild_id);
return NULL;
}
return strdup(path);
}
static int dso__load_kernel_sym(struct dso *dso, struct map *map)
{
int err;
const char *kallsyms_filename = NULL;
char *kallsyms_allocated_filename = NULL;
char *filename = NULL;
/*
* Step 1: if the user specified a kallsyms or vmlinux filename, use
* it and only it, reporting errors to the user if it cannot be used.
*
* For instance, try to analyse an ARM perf.data file _without_ a
* build-id, or if the user specifies the wrong path to the right
* vmlinux file, obviously we can't fallback to another vmlinux (a
* x86_86 one, on the machine where analysis is being performed, say),
* or worse, /proc/kallsyms.
*
* If the specified file _has_ a build-id and there is a build-id
* section in the perf.data file, we will still do the expected
* validation in dso__load_vmlinux and will bail out if they don't
* match.
*/
if (symbol_conf.kallsyms_name != NULL) {
kallsyms_filename = symbol_conf.kallsyms_name;
goto do_kallsyms;
}
if (!symbol_conf.ignore_vmlinux && symbol_conf.vmlinux_name != NULL) {
return dso__load_vmlinux(dso, map, symbol_conf.vmlinux_name, false);
}
/*
* Before checking on common vmlinux locations, check if it's
* stored as standard build id binary (not kallsyms) under
* .debug cache.
*/
if (!symbol_conf.ignore_vmlinux_buildid)
filename = __dso__build_id_filename(dso, NULL, 0, false, false);
if (filename != NULL) {
err = dso__load_vmlinux(dso, map, filename, true);
if (err > 0)
return err;
free(filename);
}
if (!symbol_conf.ignore_vmlinux && vmlinux_path != NULL) {
err = dso__load_vmlinux_path(dso, map);
if (err > 0)
return err;
}
/* do not try local files if a symfs was given */
if (symbol_conf.symfs[0] != 0)
return -1;
kallsyms_allocated_filename = dso__find_kallsyms(dso, map);
if (!kallsyms_allocated_filename)
return -1;
kallsyms_filename = kallsyms_allocated_filename;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 14:29:58 +08:00
do_kallsyms:
err = dso__load_kallsyms(dso, kallsyms_filename, map);
if (err > 0)
pr_debug("Using %s for symbols\n", kallsyms_filename);
free(kallsyms_allocated_filename);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 14:29:58 +08:00
if (err > 0 && !dso__is_kcore(dso)) {
dso->binary_type = DSO_BINARY_TYPE__KALLSYMS;
dso__set_long_name(dso, DSO__NAME_KALLSYMS, false);
map__fixup_start(map);
map__fixup_end(map);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 14:29:58 +08:00
}
return err;
}
static int dso__load_guest_kernel_sym(struct dso *dso, struct map *map)
{
int err;
const char *kallsyms_filename = NULL;
struct machine *machine = map__kmaps(map)->machine;
char path[PATH_MAX];
if (machine__is_default_guest(machine)) {
/*
* if the user specified a vmlinux filename, use it and only
* it, reporting errors to the user if it cannot be used.
* Or use file guest_kallsyms inputted by user on commandline
*/
if (symbol_conf.default_guest_vmlinux_name != NULL) {
err = dso__load_vmlinux(dso, map,
symbol_conf.default_guest_vmlinux_name,
false);
return err;
}
kallsyms_filename = symbol_conf.default_guest_kallsyms;
if (!kallsyms_filename)
return -1;
} else {
sprintf(path, "%s/proc/kallsyms", machine->root_dir);
kallsyms_filename = path;
}
err = dso__load_kallsyms(dso, kallsyms_filename, map);
if (err > 0)
pr_debug("Using %s for symbols\n", kallsyms_filename);
if (err > 0 && !dso__is_kcore(dso)) {
dso->binary_type = DSO_BINARY_TYPE__GUEST_KALLSYMS;
dso__set_long_name(dso, machine->mmap_name, false);
map__fixup_start(map);
map__fixup_end(map);
}
return err;
}
static void vmlinux_path__exit(void)
{
while (--vmlinux_path__nr_entries >= 0)
zfree(&vmlinux_path[vmlinux_path__nr_entries]);
vmlinux_path__nr_entries = 0;
zfree(&vmlinux_path);
}
static const char * const vmlinux_paths[] = {
"vmlinux",
"/boot/vmlinux"
};
static const char * const vmlinux_paths_upd[] = {
"/boot/vmlinux-%s",
"/usr/lib/debug/boot/vmlinux-%s",
"/lib/modules/%s/build/vmlinux",
"/usr/lib/debug/lib/modules/%s/vmlinux",
"/usr/lib/debug/boot/vmlinux-%s.debug"
};
static int vmlinux_path__add(const char *new_entry)
{
vmlinux_path[vmlinux_path__nr_entries] = strdup(new_entry);
if (vmlinux_path[vmlinux_path__nr_entries] == NULL)
return -1;
++vmlinux_path__nr_entries;
return 0;
}
static int vmlinux_path__init(struct perf_env *env)
{
struct utsname uts;
char bf[PATH_MAX];
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 14:40:45 +08:00
char *kernel_version;
unsigned int i;
vmlinux_path = malloc(sizeof(char *) * (ARRAY_SIZE(vmlinux_paths) +
ARRAY_SIZE(vmlinux_paths_upd)));
if (vmlinux_path == NULL)
return -1;
for (i = 0; i < ARRAY_SIZE(vmlinux_paths); i++)
if (vmlinux_path__add(vmlinux_paths[i]) < 0)
goto out_fail;
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 14:40:45 +08:00
/* only try kernel version if no symfs was given */
if (symbol_conf.symfs[0] != 0)
return 0;
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 14:40:45 +08:00
if (env) {
kernel_version = env->os_release;
} else {
if (uname(&uts) < 0)
goto out_fail;
kernel_version = uts.release;
}
for (i = 0; i < ARRAY_SIZE(vmlinux_paths_upd); i++) {
snprintf(bf, sizeof(bf), vmlinux_paths_upd[i], kernel_version);
if (vmlinux_path__add(bf) < 0)
goto out_fail;
}
return 0;
out_fail:
vmlinux_path__exit();
return -1;
}
int setup_list(struct strlist **list, const char *list_str,
const char *list_name)
{
if (list_str == NULL)
return 0;
*list = strlist__new(list_str, NULL);
if (!*list) {
pr_err("problems parsing %s list\n", list_name);
return -1;
}
symbol_conf.has_filter = true;
return 0;
}
int setup_intlist(struct intlist **list, const char *list_str,
const char *list_name)
{
if (list_str == NULL)
return 0;
*list = intlist__new(list_str);
if (!*list) {
pr_err("problems parsing %s list\n", list_name);
return -1;
}
return 0;
}
perf script: Support filtering by hex address 'perf script' supports '-S' or '--symbol' options to only list the records for these symbols. A symbol is typically a name or hex address. If it's hex address, it is the start address of one symbol. While it would be useful if we can filter trace records by any hex address (not only the start address of symbol). So now we support filtering trace records by more conditions, such as: - symbol name - start address of symbol - any hexadecimal address - address range The comparison order is defined as: 1. symbol name comparison 2. symbol start address comparison. 3. any hexadecimal address comparison. 4. address range comparison. The idea is if we can get a valid address from -S list, we add the address to addr_list for address comparison otherwise we still leave it to sym_list for symbol comparison. Some examples: root@kbl-ppc:~# ./perf script -S ffffffff9a477308 perf 8562 [000] 347303.578858: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [000] 347303.578860: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [000] 347303.578861: 11 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578903: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578905: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578906: 15 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [002] 347303.578952: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [002] 347303.578953: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) Filter the traced records by hex address ffffffff9a477308. root@kbl-ppc:~# ./perf script -S ffffffff9a4dd4ce,ffffffff9a4d2de9,ffffffff9a6bf9f4 perf 8562 [001] 347303.578911: 311706 cycles: ffffffff9a6bf9f4 __kmalloc_node+0x204 ([kernel.kallsyms]) perf 8562 [002] 347303.578960: 354477 cycles: ffffffff9a4d2de9 sched_setaffinity+0x49 ([kernel.kallsyms]) perf 8562 [003] 347303.579015: 450958 cycles: ffffffff9a4dd4ce dequeue_task_fair+0x1ae ([kernel.kallsyms]) Filter the traced records by hex address ffffffff9a4dd4ce, ffffffff9a4d2de9, ffffffff9a6bf9f4. root@kbl-ppc:~# ./perf script -S ffffffff9a477309 --addr-range 16 perf 8562 [000] 347303.578863: 291 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [001] 347303.578907: 411 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [002] 347303.578956: 462 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [003] 347303.579010: 497 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [004] 347303.579059: 429 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [005] 347303.579109: 408 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [006] 347303.579159: 460 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [007] 347303.579213: 436 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) Filter the traced records from address range [ffffffff9a477309, ffffffff9a477309 + 15]. root@kbl-ppc:~# ./perf script -S "ffffffff9b163046,rcu_nmi_exit" perf 8562 [004] 347303.579060: 12013 cycles: ffffffff9b163046 exc_nmi+0x166 ([kernel.kallsyms]) perf 8562 [007] 347303.579214: 12138 cycles: ffffffff9b165944 rcu_nmi_exit+0x34 ([kernel.kallsyms]) Filter by address + symbol Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210207080935.31784-2-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-07 16:09:35 +08:00
static int setup_addrlist(struct intlist **addr_list, struct strlist *sym_list)
{
struct str_node *pos, *tmp;
unsigned long val;
char *sep;
const char *end;
int i = 0, err;
*addr_list = intlist__new(NULL);
if (!*addr_list)
return -1;
strlist__for_each_entry_safe(pos, tmp, sym_list) {
errno = 0;
val = strtoul(pos->s, &sep, 16);
if (errno || (sep == pos->s))
continue;
if (*sep != '\0') {
end = pos->s + strlen(pos->s) - 1;
while (end >= sep && isspace(*end))
end--;
if (end >= sep)
continue;
}
err = intlist__add(*addr_list, val);
if (err)
break;
strlist__remove(sym_list, pos);
i++;
}
if (i == 0) {
intlist__delete(*addr_list);
*addr_list = NULL;
}
return 0;
}
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 20:53:51 +08:00
static bool symbol__read_kptr_restrict(void)
{
bool value = false;
FILE *fp = fopen("/proc/sys/kernel/kptr_restrict", "r");
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 20:53:51 +08:00
if (fp != NULL) {
char line[8];
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 20:53:51 +08:00
if (fgets(line, sizeof(line), fp) != NULL)
value = perf_cap__capable(CAP_SYSLOG) ?
(atoi(line) >= 2) :
(atoi(line) != 0);
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 20:53:51 +08:00
fclose(fp);
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 20:53:51 +08:00
}
/* Per kernel/kallsyms.c:
* we also restrict when perf_event_paranoid > 1 w/o CAP_SYSLOG
*/
if (perf_event_paranoid() > 1 && !perf_cap__capable(CAP_SYSLOG))
value = true;
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 20:53:51 +08:00
return value;
}
int symbol__annotation_init(void)
{
perf report: Fix switching to another perf.data file In the TUI the 's' hotkey can be used to switch to another perf.data file in the current directory, but that got broken in Fixes: b01141f4f59c ("perf annotate: Initialize the priv are in symbol__new()"), that would show this once another file was chosen: ┌─Fatal Error─────────────────────────────────────┐ │Annotation needs to be init before symbol__init()│ │ │ │ │ │Press any key... │ └─────────────────────────────────────────────────┘ Fix it by just silently bailing out if symbol__annotation_init() was already called, just like is done with symbol__init(), i.e. they are done just once at session start, not when switching to a new perf.data file. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: b01141f4f59c ("perf annotate: Initialize the priv are in symbol__new()") Link: https://lkml.kernel.org/n/tip-ogppdtpzfax7y1h6gjdv5s6u@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-13 01:58:24 +08:00
if (symbol_conf.init_annotation)
return 0;
if (symbol_conf.initialized) {
pr_err("Annotation needs to be init before symbol__init()\n");
return -1;
}
symbol_conf.priv_size += sizeof(struct annotation);
symbol_conf.init_annotation = true;
return 0;
}
int symbol__init(struct perf_env *env)
{
const char *symfs;
if (symbol_conf.initialized)
return 0;
perf tools: fix ALIGN redefinition in system headers On some systems (e.g. Android), ALIGN is defined in system headers as ALIGN(p). The definition of ALIGN used in perf takes 2 parameters: ALIGN(x,a). This leads to redefinition conflicts. Redefinition error on Android: In file included from util/include/linux/list.h:1:0, from util/callchain.h:5, from util/hist.h:6, from util/session.h:4, from util/build-id.h:4, from util/annotate.c:11: util/include/linux/kernel.h:11:0: error: "ALIGN" redefined [-Werror] bionic/libc/include/sys/param.h:38:0: note: this is the location of the previous definition Conflics with system defined ALIGN in Android: util/event.c: In function 'perf_event__synthesize_comm': util/event.c:115:32: error: macro "ALIGN" passed 2 arguments, but takes just 1 util/event.c:115:9: error: 'ALIGN' undeclared (first use in this function) util/event.c:115:9: note: each undeclared identifier is reported only once for each function it appears in In order to avoid this redefinition, ALIGN is renamed to PERF_ALIGN. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Irina Tirdea <irina.tirdea@intel.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-5-git-send-email-irina.tirdea@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:01 +08:00
symbol_conf.priv_size = PERF_ALIGN(symbol_conf.priv_size, sizeof(u64));
symbol__elf_init();
if (symbol_conf.sort_by_name)
symbol_conf.priv_size += (sizeof(struct symbol_name_rb_node) -
sizeof(struct symbol));
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 14:40:45 +08:00
if (symbol_conf.try_vmlinux_path && vmlinux_path__init(env) < 0)
return -1;
if (symbol_conf.field_sep && *symbol_conf.field_sep == '.') {
pr_err("'.' is the only non valid --field-separator argument\n");
return -1;
}
if (setup_list(&symbol_conf.dso_list,
symbol_conf.dso_list_str, "dso") < 0)
return -1;
if (setup_list(&symbol_conf.comm_list,
symbol_conf.comm_list_str, "comm") < 0)
goto out_free_dso_list;
if (setup_intlist(&symbol_conf.pid_list,
symbol_conf.pid_list_str, "pid") < 0)
goto out_free_comm_list;
if (setup_intlist(&symbol_conf.tid_list,
symbol_conf.tid_list_str, "tid") < 0)
goto out_free_pid_list;
if (setup_list(&symbol_conf.sym_list,
symbol_conf.sym_list_str, "symbol") < 0)
goto out_free_tid_list;
perf script: Support filtering by hex address 'perf script' supports '-S' or '--symbol' options to only list the records for these symbols. A symbol is typically a name or hex address. If it's hex address, it is the start address of one symbol. While it would be useful if we can filter trace records by any hex address (not only the start address of symbol). So now we support filtering trace records by more conditions, such as: - symbol name - start address of symbol - any hexadecimal address - address range The comparison order is defined as: 1. symbol name comparison 2. symbol start address comparison. 3. any hexadecimal address comparison. 4. address range comparison. The idea is if we can get a valid address from -S list, we add the address to addr_list for address comparison otherwise we still leave it to sym_list for symbol comparison. Some examples: root@kbl-ppc:~# ./perf script -S ffffffff9a477308 perf 8562 [000] 347303.578858: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [000] 347303.578860: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [000] 347303.578861: 11 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578903: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578905: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578906: 15 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [002] 347303.578952: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [002] 347303.578953: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) Filter the traced records by hex address ffffffff9a477308. root@kbl-ppc:~# ./perf script -S ffffffff9a4dd4ce,ffffffff9a4d2de9,ffffffff9a6bf9f4 perf 8562 [001] 347303.578911: 311706 cycles: ffffffff9a6bf9f4 __kmalloc_node+0x204 ([kernel.kallsyms]) perf 8562 [002] 347303.578960: 354477 cycles: ffffffff9a4d2de9 sched_setaffinity+0x49 ([kernel.kallsyms]) perf 8562 [003] 347303.579015: 450958 cycles: ffffffff9a4dd4ce dequeue_task_fair+0x1ae ([kernel.kallsyms]) Filter the traced records by hex address ffffffff9a4dd4ce, ffffffff9a4d2de9, ffffffff9a6bf9f4. root@kbl-ppc:~# ./perf script -S ffffffff9a477309 --addr-range 16 perf 8562 [000] 347303.578863: 291 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [001] 347303.578907: 411 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [002] 347303.578956: 462 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [003] 347303.579010: 497 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [004] 347303.579059: 429 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [005] 347303.579109: 408 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [006] 347303.579159: 460 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [007] 347303.579213: 436 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) Filter the traced records from address range [ffffffff9a477309, ffffffff9a477309 + 15]. root@kbl-ppc:~# ./perf script -S "ffffffff9b163046,rcu_nmi_exit" perf 8562 [004] 347303.579060: 12013 cycles: ffffffff9b163046 exc_nmi+0x166 ([kernel.kallsyms]) perf 8562 [007] 347303.579214: 12138 cycles: ffffffff9b165944 rcu_nmi_exit+0x34 ([kernel.kallsyms]) Filter by address + symbol Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210207080935.31784-2-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-07 16:09:35 +08:00
if (symbol_conf.sym_list &&
setup_addrlist(&symbol_conf.addr_list, symbol_conf.sym_list) < 0)
goto out_free_sym_list;
perf script: Add option to stop printing callchain Allow user to specify list of symbols which cause the dump of callchains to stop at that symbol. Committer notes: Testing it: # perf record -ag usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ] # # # Without it: # # perf script swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) 137f419 x86_64_start_kernel ([kernel.vmlinux].init.text) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) # # # Using it to see just what are the calls from the 'remote_function' function: # # perf script --stop-bt remote_function swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-26 04:00:21 +08:00
if (setup_list(&symbol_conf.bt_stop_list,
symbol_conf.bt_stop_list_str, "symbol") < 0)
goto out_free_sym_list;
/*
* A path to symbols of "/" is identical to ""
* reset here for simplicity.
*/
symfs = realpath(symbol_conf.symfs, NULL);
if (symfs == NULL)
symfs = symbol_conf.symfs;
if (strcmp(symfs, "/") == 0)
symbol_conf.symfs = "";
if (symfs != symbol_conf.symfs)
free((void *)symfs);
perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian <eranian@google.com> Suggested-by: David Miller <davem@davemloft.net> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-26 20:53:51 +08:00
symbol_conf.kptr_restrict = symbol__read_kptr_restrict();
symbol_conf.initialized = true;
return 0;
perf script: Add option to stop printing callchain Allow user to specify list of symbols which cause the dump of callchains to stop at that symbol. Committer notes: Testing it: # perf record -ag usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ] # # # Without it: # # perf script swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) 137f419 x86_64_start_kernel ([kernel.vmlinux].init.text) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) # # # Using it to see just what are the calls from the 'remote_function' function: # # perf script --stop-bt remote_function swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-26 04:00:21 +08:00
out_free_sym_list:
strlist__delete(symbol_conf.sym_list);
perf script: Support filtering by hex address 'perf script' supports '-S' or '--symbol' options to only list the records for these symbols. A symbol is typically a name or hex address. If it's hex address, it is the start address of one symbol. While it would be useful if we can filter trace records by any hex address (not only the start address of symbol). So now we support filtering trace records by more conditions, such as: - symbol name - start address of symbol - any hexadecimal address - address range The comparison order is defined as: 1. symbol name comparison 2. symbol start address comparison. 3. any hexadecimal address comparison. 4. address range comparison. The idea is if we can get a valid address from -S list, we add the address to addr_list for address comparison otherwise we still leave it to sym_list for symbol comparison. Some examples: root@kbl-ppc:~# ./perf script -S ffffffff9a477308 perf 8562 [000] 347303.578858: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [000] 347303.578860: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [000] 347303.578861: 11 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578903: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578905: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578906: 15 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [002] 347303.578952: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [002] 347303.578953: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) Filter the traced records by hex address ffffffff9a477308. root@kbl-ppc:~# ./perf script -S ffffffff9a4dd4ce,ffffffff9a4d2de9,ffffffff9a6bf9f4 perf 8562 [001] 347303.578911: 311706 cycles: ffffffff9a6bf9f4 __kmalloc_node+0x204 ([kernel.kallsyms]) perf 8562 [002] 347303.578960: 354477 cycles: ffffffff9a4d2de9 sched_setaffinity+0x49 ([kernel.kallsyms]) perf 8562 [003] 347303.579015: 450958 cycles: ffffffff9a4dd4ce dequeue_task_fair+0x1ae ([kernel.kallsyms]) Filter the traced records by hex address ffffffff9a4dd4ce, ffffffff9a4d2de9, ffffffff9a6bf9f4. root@kbl-ppc:~# ./perf script -S ffffffff9a477309 --addr-range 16 perf 8562 [000] 347303.578863: 291 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [001] 347303.578907: 411 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [002] 347303.578956: 462 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [003] 347303.579010: 497 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [004] 347303.579059: 429 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [005] 347303.579109: 408 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [006] 347303.579159: 460 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [007] 347303.579213: 436 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) Filter the traced records from address range [ffffffff9a477309, ffffffff9a477309 + 15]. root@kbl-ppc:~# ./perf script -S "ffffffff9b163046,rcu_nmi_exit" perf 8562 [004] 347303.579060: 12013 cycles: ffffffff9b163046 exc_nmi+0x166 ([kernel.kallsyms]) perf 8562 [007] 347303.579214: 12138 cycles: ffffffff9b165944 rcu_nmi_exit+0x34 ([kernel.kallsyms]) Filter by address + symbol Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210207080935.31784-2-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-07 16:09:35 +08:00
intlist__delete(symbol_conf.addr_list);
out_free_tid_list:
intlist__delete(symbol_conf.tid_list);
out_free_pid_list:
intlist__delete(symbol_conf.pid_list);
out_free_comm_list:
strlist__delete(symbol_conf.comm_list);
out_free_dso_list:
strlist__delete(symbol_conf.dso_list);
return -1;
}
void symbol__exit(void)
{
if (!symbol_conf.initialized)
return;
perf script: Add option to stop printing callchain Allow user to specify list of symbols which cause the dump of callchains to stop at that symbol. Committer notes: Testing it: # perf record -ag usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ] # # # Without it: # # perf script swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) 137f419 x86_64_start_kernel ([kernel.vmlinux].init.text) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) # # # Using it to see just what are the calls from the 'remote_function' function: # # perf script --stop-bt remote_function swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-26 04:00:21 +08:00
strlist__delete(symbol_conf.bt_stop_list);
strlist__delete(symbol_conf.sym_list);
strlist__delete(symbol_conf.dso_list);
strlist__delete(symbol_conf.comm_list);
intlist__delete(symbol_conf.tid_list);
intlist__delete(symbol_conf.pid_list);
perf script: Support filtering by hex address 'perf script' supports '-S' or '--symbol' options to only list the records for these symbols. A symbol is typically a name or hex address. If it's hex address, it is the start address of one symbol. While it would be useful if we can filter trace records by any hex address (not only the start address of symbol). So now we support filtering trace records by more conditions, such as: - symbol name - start address of symbol - any hexadecimal address - address range The comparison order is defined as: 1. symbol name comparison 2. symbol start address comparison. 3. any hexadecimal address comparison. 4. address range comparison. The idea is if we can get a valid address from -S list, we add the address to addr_list for address comparison otherwise we still leave it to sym_list for symbol comparison. Some examples: root@kbl-ppc:~# ./perf script -S ffffffff9a477308 perf 8562 [000] 347303.578858: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [000] 347303.578860: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [000] 347303.578861: 11 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578903: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578905: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [001] 347303.578906: 15 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [002] 347303.578952: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) perf 8562 [002] 347303.578953: 1 cycles: ffffffff9a477308 native_write_msr+0x8 ([kernel.kallsyms]) Filter the traced records by hex address ffffffff9a477308. root@kbl-ppc:~# ./perf script -S ffffffff9a4dd4ce,ffffffff9a4d2de9,ffffffff9a6bf9f4 perf 8562 [001] 347303.578911: 311706 cycles: ffffffff9a6bf9f4 __kmalloc_node+0x204 ([kernel.kallsyms]) perf 8562 [002] 347303.578960: 354477 cycles: ffffffff9a4d2de9 sched_setaffinity+0x49 ([kernel.kallsyms]) perf 8562 [003] 347303.579015: 450958 cycles: ffffffff9a4dd4ce dequeue_task_fair+0x1ae ([kernel.kallsyms]) Filter the traced records by hex address ffffffff9a4dd4ce, ffffffff9a4d2de9, ffffffff9a6bf9f4. root@kbl-ppc:~# ./perf script -S ffffffff9a477309 --addr-range 16 perf 8562 [000] 347303.578863: 291 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [001] 347303.578907: 411 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [002] 347303.578956: 462 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [003] 347303.579010: 497 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [004] 347303.579059: 429 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [005] 347303.579109: 408 cycles: ffffffff9a47730a native_write_msr+0xa ([kernel.kallsyms]) perf 8562 [006] 347303.579159: 460 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) perf 8562 [007] 347303.579213: 436 cycles: ffffffff9a47730f native_write_msr+0xf ([kernel.kallsyms]) Filter the traced records from address range [ffffffff9a477309, ffffffff9a477309 + 15]. root@kbl-ppc:~# ./perf script -S "ffffffff9b163046,rcu_nmi_exit" perf 8562 [004] 347303.579060: 12013 cycles: ffffffff9b163046 exc_nmi+0x166 ([kernel.kallsyms]) perf 8562 [007] 347303.579214: 12138 cycles: ffffffff9b165944 rcu_nmi_exit+0x34 ([kernel.kallsyms]) Filter by address + symbol Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210207080935.31784-2-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-07 16:09:35 +08:00
intlist__delete(symbol_conf.addr_list);
vmlinux_path__exit();
symbol_conf.sym_list = symbol_conf.dso_list = symbol_conf.comm_list = NULL;
perf script: Add option to stop printing callchain Allow user to specify list of symbols which cause the dump of callchains to stop at that symbol. Committer notes: Testing it: # perf record -ag usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ] # # # Without it: # # perf script swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) 137f419 x86_64_start_kernel ([kernel.vmlinux].init.text) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) # # # Using it to see just what are the calls from the 'remote_function' function: # # perf script --stop-bt remote_function swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-26 04:00:21 +08:00
symbol_conf.bt_stop_list = NULL;
symbol_conf.initialized = false;
}
int symbol__config_symfs(const struct option *opt __maybe_unused,
const char *dir, int unset __maybe_unused)
{
char *bf = NULL;
int ret;
symbol_conf.symfs = strdup(dir);
if (symbol_conf.symfs == NULL)
return -ENOMEM;
/* skip the locally configured cache if a symfs is given, and
* config buildid dir to symfs/.debug
*/
ret = asprintf(&bf, "%s/%s", dir, ".debug");
if (ret < 0)
return -ENOMEM;
set_buildid_dir(bf);
free(bf);
return 0;
}
struct mem_info *mem_info__get(struct mem_info *mi)
{
if (mi)
refcount_inc(&mi->refcnt);
return mi;
}
void mem_info__put(struct mem_info *mi)
{
if (mi && refcount_dec_and_test(&mi->refcnt))
free(mi);
}
struct mem_info *mem_info__new(void)
{
struct mem_info *mi = zalloc(sizeof(*mi));
if (mi)
refcount_set(&mi->refcnt, 1);
return mi;
}