OpenCloudOS-Kernel/drivers/ide/gayle.c

186 lines
4.3 KiB
C
Raw Normal View History

/*
* Amiga Gayle IDE Driver
*
* Created 9 Jul 1997 by Geert Uytterhoeven
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/zorro.h>
#include <linux/module.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/amigayle.h>
/*
* Bases of the IDE interfaces
*/
#define GAYLE_BASE_4000 0xdd2020 /* A4000/A4000T */
#define GAYLE_BASE_1200 0xda0000 /* A1200/A600 and E-Matrix 530 */
#define GAYLE_IDEREG_SIZE 0x2000
/*
* Offsets from one of the above bases
*/
#define GAYLE_CONTROL 0x101a
/*
* These are at different offsets from the base
*/
#define GAYLE_IRQ_4000 0xdd3020 /* MSB = 1, Harddisk is source of */
#define GAYLE_IRQ_1200 0xda9000 /* interrupt */
/*
* Offset of the secondary port for IDE doublers
* Note that GAYLE_CONTROL is NOT available then!
*/
#define GAYLE_NEXT_PORT 0x1000
#define GAYLE_NUM_HWIFS 2
#define GAYLE_NUM_PROBE_HWIFS (ide_doubler ? GAYLE_NUM_HWIFS : \
GAYLE_NUM_HWIFS-1)
#define GAYLE_HAS_CONTROL_REG (!ide_doubler)
static int ide_doubler;
module_param_named(doubler, ide_doubler, bool, 0);
MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
/*
* Check and acknowledge the interrupt status
*/
static int gayle_test_irq(ide_hwif_t *hwif)
{
unsigned char ch;
ch = z_readb(hwif->io_ports.irq_addr);
if (!(ch & GAYLE_IRQ_IDE))
return 0;
return 1;
}
static void gayle_a1200_clear_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
(void)z_readb(hwif->io_ports.status_addr);
z_writeb(0x7c, hwif->io_ports.irq_addr);
}
static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
unsigned long ctl, unsigned long irq_port)
{
int i;
memset(hw, 0, sizeof(*hw));
hw->io_ports.data_addr = base;
for (i = 1; i < 8; i++)
hw->io_ports_array[i] = base + 2 + i * 4;
hw->io_ports.ctl_addr = ctl;
hw->io_ports.irq_addr = irq_port;
hw->irq = IRQ_AMIGA_PORTS;
}
static const struct ide_port_ops gayle_a4000_port_ops = {
.test_irq = gayle_test_irq,
};
static const struct ide_port_ops gayle_a1200_port_ops = {
.clear_irq = gayle_a1200_clear_irq,
.test_irq = gayle_test_irq,
};
static const struct ide_port_info gayle_port_info = {
.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_DMA,
.irq_flags = IRQF_SHARED,
.chipset = ide_generic,
};
/*
* Probe for a Gayle IDE interface (and optionally for an IDE doubler)
*/
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-27 03:13:07 +08:00
static int __init gayle_init(void)
{
unsigned long phys_base, res_start, res_n;
unsigned long base, ctrlport, irqport;
int a4000, i, rc;
struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
struct ide_port_info d = gayle_port_info;
if (!MACH_IS_AMIGA)
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-27 03:13:07 +08:00
return -ENODEV;
if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE))
goto found;
#ifdef CONFIG_ZORRO
if (zorro_find_device(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE,
NULL))
goto found;
#endif
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-27 03:13:07 +08:00
return -ENODEV;
found:
printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n",
a4000 ? 4000 : 1200,
ide_doubler ? ", IDE doubler" : "");
if (a4000) {
phys_base = GAYLE_BASE_4000;
irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
d.port_ops = &gayle_a4000_port_ops;
} else {
phys_base = GAYLE_BASE_1200;
irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
d.port_ops = &gayle_a1200_port_ops;
}
res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
res_n = GAYLE_IDEREG_SIZE;
if (!request_mem_region(res_start, res_n, "IDE"))
return -EBUSY;
for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
gayle_setup_ports(&hw[i], base, ctrlport, irqport);
hws[i] = &hw[i];
}
rc = ide_host_add(&d, hws, i, NULL);
if (rc)
release_mem_region(res_start, res_n);
return rc;
}
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-27 03:13:07 +08:00
module_init(gayle_init);
MODULE_LICENSE("GPL");