2007-08-22 11:46:44 +08:00
|
|
|
#ifndef _ASM_POWERPC_EXCEPTION_H
|
|
|
|
|
#define _ASM_POWERPC_EXCEPTION_H
|
|
|
|
|
/*
|
|
|
|
|
* Extracted from head_64.S
|
|
|
|
|
*
|
|
|
|
|
* PowerPC version
|
|
|
|
|
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
|
|
|
|
|
*
|
|
|
|
|
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
|
|
|
|
|
* Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
|
|
|
|
|
* Adapted for Power Macintosh by Paul Mackerras.
|
|
|
|
|
* Low-level exception handlers and MMU support
|
|
|
|
|
* rewritten by Paul Mackerras.
|
|
|
|
|
* Copyright (C) 1996 Paul Mackerras.
|
|
|
|
|
*
|
|
|
|
|
* Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
|
|
|
|
|
* Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
|
|
|
|
|
*
|
|
|
|
|
* This file contains the low-level support and setup for the
|
|
|
|
|
* PowerPC-64 platform, including trap and interrupt dispatch.
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
|
* as published by the Free Software Foundation; either version
|
|
|
|
|
* 2 of the License, or (at your option) any later version.
|
|
|
|
|
*/
|
|
|
|
|
/*
|
|
|
|
|
* The following macros define the code that appears as
|
|
|
|
|
* the prologue to each of the exception handlers. They
|
|
|
|
|
* are split into two parts to allow a single kernel binary
|
|
|
|
|
* to be used for pSeries and iSeries.
|
|
|
|
|
*
|
|
|
|
|
* We make as much of the exception code common between native
|
|
|
|
|
* exception handlers (including pSeries LPAR) and iSeries LPAR
|
|
|
|
|
* implementations as possible.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define EX_R9 0
|
|
|
|
|
#define EX_R10 8
|
|
|
|
|
#define EX_R11 16
|
|
|
|
|
#define EX_R12 24
|
|
|
|
|
#define EX_R13 32
|
|
|
|
|
#define EX_SRR0 40
|
|
|
|
|
#define EX_DAR 48
|
|
|
|
|
#define EX_DSISR 56
|
|
|
|
|
#define EX_CCR 60
|
|
|
|
|
#define EX_R3 64
|
|
|
|
|
#define EX_LR 72
|
2011-05-02 03:48:20 +08:00
|
|
|
#define EX_CFAR 80
|
2012-12-07 05:48:26 +08:00
|
|
|
#define EX_PPR 88 /* SMT thread status register (priority) */
|
2013-08-13 13:54:52 +08:00
|
|
|
#define EX_CTR 96
|
2007-08-22 11:46:44 +08:00
|
|
|
|
2012-11-02 14:21:28 +08:00
|
|
|
#ifdef CONFIG_RELOCATABLE
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
#define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
|
2012-11-02 14:21:28 +08:00
|
|
|
ld r12,PACAKBASE(r13); /* get high part of &label */ \
|
|
|
|
|
mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
|
|
|
|
|
LOAD_HANDLER(r12,label); \
|
2013-08-13 13:54:52 +08:00
|
|
|
mtctr r12; \
|
2012-11-02 14:21:28 +08:00
|
|
|
mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
|
|
|
|
|
li r10,MSR_RI; \
|
|
|
|
|
mtmsrd r10,1; /* Set RI (EE=0) */ \
|
2013-08-13 13:54:52 +08:00
|
|
|
bctr;
|
2012-11-02 14:21:28 +08:00
|
|
|
#else
|
|
|
|
|
/* If not relocatable, we can jump directly -- and save messing with LR */
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
#define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
|
2012-11-02 14:21:28 +08:00
|
|
|
mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
|
|
|
|
|
mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
|
|
|
|
|
li r10,MSR_RI; \
|
|
|
|
|
mtmsrd r10,1; /* Set RI (EE=0) */ \
|
|
|
|
|
b label;
|
|
|
|
|
#endif
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
#define EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
|
|
|
|
|
__EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
|
2012-11-02 14:21:28 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* As EXCEPTION_PROLOG_PSERIES(), except we've already got relocation on
|
|
|
|
|
* so no need to rfid. Save lr in case we're CONFIG_RELOCATABLE, in which
|
|
|
|
|
* case EXCEPTION_RELON_PROLOG_PSERIES_1 will be using lr.
|
|
|
|
|
*/
|
|
|
|
|
#define EXCEPTION_RELON_PROLOG_PSERIES(area, label, h, extra, vec) \
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
EXCEPTION_PROLOG_0(area); \
|
2012-11-02 14:21:28 +08:00
|
|
|
EXCEPTION_PROLOG_1(area, extra, vec); \
|
|
|
|
|
EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)
|
|
|
|
|
|
2007-08-22 11:46:44 +08:00
|
|
|
/*
|
|
|
|
|
* We're short on space and time in the exception prolog, so we can't
|
|
|
|
|
* use the normal SET_REG_IMMEDIATE macro. Normally we just need the
|
|
|
|
|
* low halfword of the address, but for Kdump we need the whole low
|
|
|
|
|
* word.
|
|
|
|
|
*/
|
|
|
|
|
#define LOAD_HANDLER(reg, label) \
|
2012-11-05 14:10:35 +08:00
|
|
|
/* Handlers must be within 64K of kbase, which must be 64k aligned */ \
|
|
|
|
|
ori reg,reg,(label)-_stext; /* virt addr of handler ... */
|
2007-08-22 11:46:44 +08:00
|
|
|
|
2011-04-05 12:20:31 +08:00
|
|
|
/* Exception register prefixes */
|
|
|
|
|
#define EXC_HV H
|
|
|
|
|
#define EXC_STD
|
|
|
|
|
|
2012-11-02 14:21:28 +08:00
|
|
|
#if defined(CONFIG_RELOCATABLE)
|
|
|
|
|
/*
|
2013-08-13 13:54:52 +08:00
|
|
|
* If we support interrupts with relocation on AND we're a relocatable kernel,
|
|
|
|
|
* we need to use CTR to get to the 2nd level handler. So, save/restore it
|
|
|
|
|
* when required.
|
2012-11-02 14:21:28 +08:00
|
|
|
*/
|
2013-08-13 13:54:52 +08:00
|
|
|
#define SAVE_CTR(reg, area) mfctr reg ; std reg,area+EX_CTR(r13)
|
|
|
|
|
#define GET_CTR(reg, area) ld reg,area+EX_CTR(r13)
|
|
|
|
|
#define RESTORE_CTR(reg, area) ld reg,area+EX_CTR(r13) ; mtctr reg
|
2012-11-02 14:21:28 +08:00
|
|
|
#else
|
2013-08-13 13:54:52 +08:00
|
|
|
/* ...else CTR is unused and in register. */
|
|
|
|
|
#define SAVE_CTR(reg, area)
|
|
|
|
|
#define GET_CTR(reg, area) mfctr reg
|
|
|
|
|
#define RESTORE_CTR(reg, area)
|
2012-11-02 14:21:28 +08:00
|
|
|
#endif
|
|
|
|
|
|
2012-12-07 05:50:32 +08:00
|
|
|
/*
|
|
|
|
|
* PPR save/restore macros used in exceptions_64s.S
|
|
|
|
|
* Used for P7 or later processors
|
|
|
|
|
*/
|
|
|
|
|
#define SAVE_PPR(area, ra, rb) \
|
|
|
|
|
BEGIN_FTR_SECTION_NESTED(940) \
|
|
|
|
|
ld ra,PACACURRENT(r13); \
|
|
|
|
|
ld rb,area+EX_PPR(r13); /* Read PPR from paca */ \
|
|
|
|
|
std rb,TASKTHREADPPR(ra); \
|
|
|
|
|
END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940)
|
|
|
|
|
|
|
|
|
|
#define RESTORE_PPR_PACA(area, ra) \
|
|
|
|
|
BEGIN_FTR_SECTION_NESTED(941) \
|
|
|
|
|
ld ra,area+EX_PPR(r13); \
|
|
|
|
|
mtspr SPRN_PPR,ra; \
|
|
|
|
|
END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941)
|
|
|
|
|
|
|
|
|
|
/*
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
* Get an SPR into a register if the CPU has the given feature
|
2012-12-07 05:50:32 +08:00
|
|
|
*/
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
#define OPT_GET_SPR(ra, spr, ftr) \
|
2012-12-07 05:50:32 +08:00
|
|
|
BEGIN_FTR_SECTION_NESTED(943) \
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
mfspr ra,spr; \
|
|
|
|
|
END_FTR_SECTION_NESTED(ftr,ftr,943)
|
2012-12-07 05:50:32 +08:00
|
|
|
|
2014-03-11 13:26:18 +08:00
|
|
|
/*
|
|
|
|
|
* Set an SPR from a register if the CPU has the given feature
|
|
|
|
|
*/
|
|
|
|
|
#define OPT_SET_SPR(ra, spr, ftr) \
|
|
|
|
|
BEGIN_FTR_SECTION_NESTED(943) \
|
|
|
|
|
mtspr spr,ra; \
|
|
|
|
|
END_FTR_SECTION_NESTED(ftr,ftr,943)
|
|
|
|
|
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
/*
|
|
|
|
|
* Save a register to the PACA if the CPU has the given feature
|
|
|
|
|
*/
|
|
|
|
|
#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr) \
|
|
|
|
|
BEGIN_FTR_SECTION_NESTED(943) \
|
|
|
|
|
std ra,offset(r13); \
|
|
|
|
|
END_FTR_SECTION_NESTED(ftr,ftr,943)
|
|
|
|
|
|
|
|
|
|
#define EXCEPTION_PROLOG_0(area) \
|
2011-01-20 14:50:21 +08:00
|
|
|
GET_PACA(r13); \
|
2012-12-07 05:51:04 +08:00
|
|
|
std r9,area+EX_R9(r13); /* save r9 */ \
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR); \
|
|
|
|
|
HMT_MEDIUM; \
|
2012-12-07 05:51:04 +08:00
|
|
|
std r10,area+EX_R10(r13); /* save r10 - r12 */ \
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR)
|
|
|
|
|
|
|
|
|
|
#define __EXCEPTION_PROLOG_1(area, extra, vec) \
|
|
|
|
|
OPT_SAVE_REG_TO_PACA(area+EX_PPR, r9, CPU_FTR_HAS_PPR); \
|
|
|
|
|
OPT_SAVE_REG_TO_PACA(area+EX_CFAR, r10, CPU_FTR_CFAR); \
|
2013-08-13 13:54:52 +08:00
|
|
|
SAVE_CTR(r10, area); \
|
2011-06-29 08:18:26 +08:00
|
|
|
mfcr r9; \
|
|
|
|
|
extra(vec); \
|
|
|
|
|
std r11,area+EX_R11(r13); \
|
|
|
|
|
std r12,area+EX_R12(r13); \
|
|
|
|
|
GET_SCRATCH0(r10); \
|
|
|
|
|
std r10,area+EX_R13(r13)
|
|
|
|
|
#define EXCEPTION_PROLOG_1(area, extra, vec) \
|
|
|
|
|
__EXCEPTION_PROLOG_1(area, extra, vec)
|
2007-08-22 11:48:37 +08:00
|
|
|
|
2011-04-05 12:20:31 +08:00
|
|
|
#define __EXCEPTION_PROLOG_PSERIES_1(label, h) \
|
2008-08-30 09:40:24 +08:00
|
|
|
ld r12,PACAKBASE(r13); /* get high part of &label */ \
|
|
|
|
|
ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \
|
2011-04-05 12:20:31 +08:00
|
|
|
mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
|
2007-08-22 11:46:44 +08:00
|
|
|
LOAD_HANDLER(r12,label) \
|
2011-04-05 12:20:31 +08:00
|
|
|
mtspr SPRN_##h##SRR0,r12; \
|
|
|
|
|
mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
|
|
|
|
|
mtspr SPRN_##h##SRR1,r10; \
|
|
|
|
|
h##rfid; \
|
2007-08-22 11:46:44 +08:00
|
|
|
b . /* prevent speculative execution */
|
2011-06-29 08:18:26 +08:00
|
|
|
#define EXCEPTION_PROLOG_PSERIES_1(label, h) \
|
2011-04-05 12:20:31 +08:00
|
|
|
__EXCEPTION_PROLOG_PSERIES_1(label, h)
|
2007-08-22 11:46:44 +08:00
|
|
|
|
2011-06-29 08:18:26 +08:00
|
|
|
#define EXCEPTION_PROLOG_PSERIES(area, label, h, extra, vec) \
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
EXCEPTION_PROLOG_0(area); \
|
2011-06-29 08:18:26 +08:00
|
|
|
EXCEPTION_PROLOG_1(area, extra, vec); \
|
2011-04-05 12:20:31 +08:00
|
|
|
EXCEPTION_PROLOG_PSERIES_1(label, h);
|
2009-07-17 03:36:57 +08:00
|
|
|
|
2011-06-29 08:18:26 +08:00
|
|
|
#define __KVMTEST(n) \
|
2011-06-29 08:20:58 +08:00
|
|
|
lbz r10,HSTATE_IN_GUEST(r13); \
|
2011-06-29 08:18:26 +08:00
|
|
|
cmpwi r10,0; \
|
|
|
|
|
bne do_kvm_##n
|
|
|
|
|
|
2013-10-08 00:47:55 +08:00
|
|
|
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
|
|
|
|
|
/*
|
|
|
|
|
* If hv is possible, interrupts come into to the hv version
|
|
|
|
|
* of the kvmppc_interrupt code, which then jumps to the PR handler,
|
|
|
|
|
* kvmppc_interrupt_pr, if the guest is a PR guest.
|
|
|
|
|
*/
|
|
|
|
|
#define kvmppc_interrupt kvmppc_interrupt_hv
|
|
|
|
|
#else
|
|
|
|
|
#define kvmppc_interrupt kvmppc_interrupt_pr
|
|
|
|
|
#endif
|
|
|
|
|
|
2011-06-29 08:18:26 +08:00
|
|
|
#define __KVM_HANDLER(area, h, n) \
|
|
|
|
|
do_kvm_##n: \
|
2013-02-05 02:10:51 +08:00
|
|
|
BEGIN_FTR_SECTION_NESTED(947) \
|
|
|
|
|
ld r10,area+EX_CFAR(r13); \
|
|
|
|
|
std r10,HSTATE_CFAR(r13); \
|
|
|
|
|
END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947); \
|
2013-09-20 12:52:39 +08:00
|
|
|
BEGIN_FTR_SECTION_NESTED(948) \
|
|
|
|
|
ld r10,area+EX_PPR(r13); \
|
|
|
|
|
std r10,HSTATE_PPR(r13); \
|
|
|
|
|
END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948); \
|
2011-06-29 08:18:26 +08:00
|
|
|
ld r10,area+EX_R10(r13); \
|
2013-02-05 02:10:51 +08:00
|
|
|
stw r9,HSTATE_SCRATCH1(r13); \
|
2011-06-29 08:18:26 +08:00
|
|
|
ld r9,area+EX_R9(r13); \
|
2013-02-05 02:10:51 +08:00
|
|
|
std r12,HSTATE_SCRATCH0(r13); \
|
2011-06-29 08:18:26 +08:00
|
|
|
li r12,n; \
|
|
|
|
|
b kvmppc_interrupt
|
|
|
|
|
|
|
|
|
|
#define __KVM_HANDLER_SKIP(area, h, n) \
|
|
|
|
|
do_kvm_##n: \
|
|
|
|
|
cmpwi r10,KVM_GUEST_MODE_SKIP; \
|
|
|
|
|
ld r10,area+EX_R10(r13); \
|
|
|
|
|
beq 89f; \
|
2011-06-29 08:20:58 +08:00
|
|
|
stw r9,HSTATE_SCRATCH1(r13); \
|
2013-09-20 12:52:39 +08:00
|
|
|
BEGIN_FTR_SECTION_NESTED(948) \
|
|
|
|
|
ld r9,area+EX_PPR(r13); \
|
|
|
|
|
std r9,HSTATE_PPR(r13); \
|
|
|
|
|
END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948); \
|
2011-06-29 08:18:26 +08:00
|
|
|
ld r9,area+EX_R9(r13); \
|
2011-06-29 08:20:58 +08:00
|
|
|
std r12,HSTATE_SCRATCH0(r13); \
|
2011-06-29 08:18:26 +08:00
|
|
|
li r12,n; \
|
|
|
|
|
b kvmppc_interrupt; \
|
|
|
|
|
89: mtocrf 0x80,r9; \
|
|
|
|
|
ld r9,area+EX_R9(r13); \
|
|
|
|
|
b kvmppc_skip_##h##interrupt
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
|
|
|
|
|
#define KVMTEST(n) __KVMTEST(n)
|
|
|
|
|
#define KVM_HANDLER(area, h, n) __KVM_HANDLER(area, h, n)
|
|
|
|
|
#define KVM_HANDLER_SKIP(area, h, n) __KVM_HANDLER_SKIP(area, h, n)
|
|
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
#define KVMTEST(n)
|
|
|
|
|
#define KVM_HANDLER(area, h, n)
|
|
|
|
|
#define KVM_HANDLER_SKIP(area, h, n)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define NOTEST(n)
|
|
|
|
|
|
2007-08-22 11:46:44 +08:00
|
|
|
/*
|
|
|
|
|
* The common exception prolog is used for all except a few exceptions
|
|
|
|
|
* such as a segment miss on a kernel address. We have to be prepared
|
|
|
|
|
* to take another exception from the point where we first touch the
|
|
|
|
|
* kernel stack onwards.
|
|
|
|
|
*
|
|
|
|
|
* On entry r13 points to the paca, r9-r13 are saved in the paca,
|
|
|
|
|
* r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
|
|
|
|
|
* SRR1, and relocation is on.
|
|
|
|
|
*/
|
|
|
|
|
#define EXCEPTION_PROLOG_COMMON(n, area) \
|
|
|
|
|
andi. r10,r12,MSR_PR; /* See if coming from user */ \
|
|
|
|
|
mr r10,r1; /* Save r1 */ \
|
|
|
|
|
subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \
|
|
|
|
|
beq- 1f; \
|
|
|
|
|
ld r1,PACAKSAVE(r13); /* kernel stack to use */ \
|
2013-12-16 12:12:43 +08:00
|
|
|
1: cmpdi cr1,r1,-INT_FRAME_SIZE; /* check if r1 is in userspace */ \
|
2011-05-02 03:46:44 +08:00
|
|
|
blt+ cr1,3f; /* abort if it is */ \
|
|
|
|
|
li r1,(n); /* will be reloaded later */ \
|
2007-08-22 11:46:44 +08:00
|
|
|
sth r1,PACA_TRAP_SAVE(r13); \
|
2011-05-02 03:46:44 +08:00
|
|
|
std r3,area+EX_R3(r13); \
|
|
|
|
|
addi r3,r13,area; /* r3 -> where regs are saved*/ \
|
2013-08-13 13:54:52 +08:00
|
|
|
RESTORE_CTR(r1, area); \
|
2007-08-22 11:46:44 +08:00
|
|
|
b bad_stack; \
|
|
|
|
|
3: std r9,_CCR(r1); /* save CR in stackframe */ \
|
|
|
|
|
std r11,_NIP(r1); /* save SRR0 in stackframe */ \
|
|
|
|
|
std r12,_MSR(r1); /* save SRR1 in stackframe */ \
|
|
|
|
|
std r10,0(r1); /* make stack chain pointer */ \
|
|
|
|
|
std r0,GPR0(r1); /* save r0 in stackframe */ \
|
|
|
|
|
std r10,GPR1(r1); /* save r1 in stackframe */ \
|
2012-12-07 05:46:37 +08:00
|
|
|
beq 4f; /* if from kernel mode */ \
|
2007-08-22 11:46:44 +08:00
|
|
|
ACCOUNT_CPU_USER_ENTRY(r9, r10); \
|
2012-12-07 05:51:04 +08:00
|
|
|
SAVE_PPR(area, r9, r10); \
|
2013-10-30 22:33:51 +08:00
|
|
|
4: EXCEPTION_PROLOG_COMMON_2(area) \
|
|
|
|
|
EXCEPTION_PROLOG_COMMON_3(n) \
|
|
|
|
|
ACCOUNT_STOLEN_TIME
|
|
|
|
|
|
|
|
|
|
/* Save original regs values from save area to stack frame. */
|
|
|
|
|
#define EXCEPTION_PROLOG_COMMON_2(area) \
|
2007-08-22 11:46:44 +08:00
|
|
|
ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \
|
|
|
|
|
ld r10,area+EX_R10(r13); \
|
|
|
|
|
std r9,GPR9(r1); \
|
|
|
|
|
std r10,GPR10(r1); \
|
|
|
|
|
ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \
|
|
|
|
|
ld r10,area+EX_R12(r13); \
|
|
|
|
|
ld r11,area+EX_R13(r13); \
|
|
|
|
|
std r9,GPR11(r1); \
|
|
|
|
|
std r10,GPR12(r1); \
|
|
|
|
|
std r11,GPR13(r1); \
|
2011-05-02 03:48:20 +08:00
|
|
|
BEGIN_FTR_SECTION_NESTED(66); \
|
|
|
|
|
ld r10,area+EX_CFAR(r13); \
|
|
|
|
|
std r10,ORIG_GPR3(r1); \
|
|
|
|
|
END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
|
2013-10-30 22:33:51 +08:00
|
|
|
GET_CTR(r10, area); \
|
|
|
|
|
std r10,_CTR(r1);
|
|
|
|
|
|
|
|
|
|
#define EXCEPTION_PROLOG_COMMON_3(n) \
|
|
|
|
|
std r2,GPR2(r1); /* save r2 in stackframe */ \
|
|
|
|
|
SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
|
|
|
|
|
SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
|
2013-08-13 13:54:52 +08:00
|
|
|
mflr r9; /* Get LR, later save to stack */ \
|
2007-08-22 11:46:44 +08:00
|
|
|
ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
|
|
|
|
|
std r9,_LINK(r1); \
|
|
|
|
|
lbz r10,PACASOFTIRQEN(r13); \
|
|
|
|
|
mfspr r11,SPRN_XER; /* save XER in stackframe */ \
|
|
|
|
|
std r10,SOFTE(r1); \
|
|
|
|
|
std r11,_XER(r1); \
|
|
|
|
|
li r9,(n)+1; \
|
|
|
|
|
std r9,_TRAP(r1); /* set trap number */ \
|
|
|
|
|
li r10,0; \
|
|
|
|
|
ld r11,exception_marker@toc(r2); \
|
|
|
|
|
std r10,RESULT(r1); /* clear regs->result */ \
|
2013-10-30 22:33:51 +08:00
|
|
|
std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */
|
2007-08-22 11:46:44 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Exception vectors.
|
|
|
|
|
*/
|
2015-12-16 18:10:22 +08:00
|
|
|
#define STD_EXCEPTION_PSERIES(vec, label) \
|
|
|
|
|
. = vec; \
|
2007-08-22 11:46:44 +08:00
|
|
|
.globl label##_pSeries; \
|
|
|
|
|
label##_pSeries: \
|
2011-04-05 11:59:58 +08:00
|
|
|
SET_SCRATCH0(r13); /* save r13 */ \
|
2011-06-29 08:18:26 +08:00
|
|
|
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
|
powerpc/64: Include KVM guest test in all interrupt vectors
Currently, if HV KVM is configured but PR KVM isn't, we don't include
a test to see whether we were interrupted in KVM guest context for the
set of interrupts which get delivered directly to the guest by hardware
if they occur in the guest. This includes things like program
interrupts.
However, the recent bug where userspace could set the MSR for a VCPU
to have an illegal value in the TS field, and thus cause a TM Bad Thing
type of program interrupt on the hrfid that enters the guest, showed that
we can never be completely sure that these interrupts can never occur
in the guest entry/exit code. If one of these interrupts does happen
and we have HV KVM configured but not PR KVM, then we end up trying to
run the handler in the host with the MMU set to the guest MMU context,
which generally ends badly.
Thus, for robustness it is better to have the test in every interrupt
vector, so that if some way is found to trigger some interrupt in the
guest entry/exit path, we can handle it without immediately crashing
the host.
This means that the distinction between KVMTEST and KVMTEST_PR goes
away. Thus we delete KVMTEST_PR and associated macros and use KVMTEST
everywhere that we previously used either KVMTEST_PR or KVMTEST. It
also means that SOFTEN_TEST_HV_201 becomes the same as SOFTEN_TEST_PR,
so we deleted SOFTEN_TEST_HV_201 and use SOFTEN_TEST_PR instead.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-12 13:44:42 +08:00
|
|
|
EXC_STD, KVMTEST, vec)
|
2007-08-22 11:46:44 +08:00
|
|
|
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
/* Version of above for when we have to branch out-of-line */
|
|
|
|
|
#define STD_EXCEPTION_PSERIES_OOL(vec, label) \
|
|
|
|
|
.globl label##_pSeries; \
|
|
|
|
|
label##_pSeries: \
|
powerpc/64: Include KVM guest test in all interrupt vectors
Currently, if HV KVM is configured but PR KVM isn't, we don't include
a test to see whether we were interrupted in KVM guest context for the
set of interrupts which get delivered directly to the guest by hardware
if they occur in the guest. This includes things like program
interrupts.
However, the recent bug where userspace could set the MSR for a VCPU
to have an illegal value in the TS field, and thus cause a TM Bad Thing
type of program interrupt on the hrfid that enters the guest, showed that
we can never be completely sure that these interrupts can never occur
in the guest entry/exit code. If one of these interrupts does happen
and we have HV KVM configured but not PR KVM, then we end up trying to
run the handler in the host with the MMU set to the guest MMU context,
which generally ends badly.
Thus, for robustness it is better to have the test in every interrupt
vector, so that if some way is found to trigger some interrupt in the
guest entry/exit path, we can handle it without immediately crashing
the host.
This means that the distinction between KVMTEST and KVMTEST_PR goes
away. Thus we delete KVMTEST_PR and associated macros and use KVMTEST
everywhere that we previously used either KVMTEST_PR or KVMTEST. It
also means that SOFTEN_TEST_HV_201 becomes the same as SOFTEN_TEST_PR,
so we deleted SOFTEN_TEST_HV_201 and use SOFTEN_TEST_PR instead.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-12 13:44:42 +08:00
|
|
|
EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST, vec); \
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_STD)
|
|
|
|
|
|
2011-04-05 12:27:11 +08:00
|
|
|
#define STD_EXCEPTION_HV(loc, vec, label) \
|
|
|
|
|
. = loc; \
|
|
|
|
|
.globl label##_hv; \
|
|
|
|
|
label##_hv: \
|
2011-06-29 08:18:26 +08:00
|
|
|
SET_SCRATCH0(r13); /* save r13 */ \
|
|
|
|
|
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
|
|
|
|
|
EXC_HV, KVMTEST, vec)
|
2007-08-22 11:46:44 +08:00
|
|
|
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
/* Version of above for when we have to branch out-of-line */
|
|
|
|
|
#define STD_EXCEPTION_HV_OOL(vec, label) \
|
|
|
|
|
.globl label##_hv; \
|
|
|
|
|
label##_hv: \
|
|
|
|
|
EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST, vec); \
|
|
|
|
|
EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_HV)
|
|
|
|
|
|
2012-11-02 14:21:28 +08:00
|
|
|
#define STD_RELON_EXCEPTION_PSERIES(loc, vec, label) \
|
|
|
|
|
. = loc; \
|
|
|
|
|
.globl label##_relon_pSeries; \
|
|
|
|
|
label##_relon_pSeries: \
|
|
|
|
|
/* No guest interrupts come through here */ \
|
|
|
|
|
SET_SCRATCH0(r13); /* save r13 */ \
|
|
|
|
|
EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
|
2013-06-25 15:47:55 +08:00
|
|
|
EXC_STD, NOTEST, vec)
|
2012-11-02 14:21:28 +08:00
|
|
|
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
#define STD_RELON_EXCEPTION_PSERIES_OOL(vec, label) \
|
|
|
|
|
.globl label##_relon_pSeries; \
|
|
|
|
|
label##_relon_pSeries: \
|
2013-06-25 15:47:55 +08:00
|
|
|
EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, vec); \
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, EXC_STD)
|
|
|
|
|
|
2012-11-02 14:21:28 +08:00
|
|
|
#define STD_RELON_EXCEPTION_HV(loc, vec, label) \
|
|
|
|
|
. = loc; \
|
|
|
|
|
.globl label##_relon_hv; \
|
|
|
|
|
label##_relon_hv: \
|
|
|
|
|
/* No guest interrupts come through here */ \
|
|
|
|
|
SET_SCRATCH0(r13); /* save r13 */ \
|
|
|
|
|
EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
|
2013-06-25 15:47:55 +08:00
|
|
|
EXC_HV, NOTEST, vec)
|
2012-11-02 14:21:28 +08:00
|
|
|
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
#define STD_RELON_EXCEPTION_HV_OOL(vec, label) \
|
|
|
|
|
.globl label##_relon_hv; \
|
|
|
|
|
label##_relon_hv: \
|
2013-06-25 15:47:55 +08:00
|
|
|
EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, vec); \
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, EXC_HV)
|
|
|
|
|
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
/* This associate vector numbers with bits in paca->irq_happened */
|
|
|
|
|
#define SOFTEN_VALUE_0x500 PACA_IRQ_EE
|
|
|
|
|
#define SOFTEN_VALUE_0x502 PACA_IRQ_EE
|
|
|
|
|
#define SOFTEN_VALUE_0x900 PACA_IRQ_DEC
|
|
|
|
|
#define SOFTEN_VALUE_0x982 PACA_IRQ_DEC
|
2012-11-15 02:49:46 +08:00
|
|
|
#define SOFTEN_VALUE_0xa00 PACA_IRQ_DBELL
|
2012-11-15 02:49:45 +08:00
|
|
|
#define SOFTEN_VALUE_0xe80 PACA_IRQ_DBELL
|
|
|
|
|
#define SOFTEN_VALUE_0xe82 PACA_IRQ_DBELL
|
2014-07-29 21:10:01 +08:00
|
|
|
#define SOFTEN_VALUE_0xe60 PACA_IRQ_HMI
|
|
|
|
|
#define SOFTEN_VALUE_0xe62 PACA_IRQ_HMI
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
|
|
|
|
|
#define __SOFTEN_TEST(h, vec) \
|
2007-08-22 11:46:44 +08:00
|
|
|
lbz r10,PACASOFTIRQEN(r13); \
|
|
|
|
|
cmpwi r10,0; \
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
li r10,SOFTEN_VALUE_##vec; \
|
2011-06-29 08:18:26 +08:00
|
|
|
beq masked_##h##interrupt
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
#define _SOFTEN_TEST(h, vec) __SOFTEN_TEST(h, vec)
|
2011-06-29 08:18:26 +08:00
|
|
|
|
KVM: PPC: Add support for Book3S processors in hypervisor mode
This adds support for KVM running on 64-bit Book 3S processors,
specifically POWER7, in hypervisor mode. Using hypervisor mode means
that the guest can use the processor's supervisor mode. That means
that the guest can execute privileged instructions and access privileged
registers itself without trapping to the host. This gives excellent
performance, but does mean that KVM cannot emulate a processor
architecture other than the one that the hardware implements.
This code assumes that the guest is running paravirtualized using the
PAPR (Power Architecture Platform Requirements) interface, which is the
interface that IBM's PowerVM hypervisor uses. That means that existing
Linux distributions that run on IBM pSeries machines will also run
under KVM without modification. In order to communicate the PAPR
hypercalls to qemu, this adds a new KVM_EXIT_PAPR_HCALL exit code
to include/linux/kvm.h.
Currently the choice between book3s_hv support and book3s_pr support
(i.e. the existing code, which runs the guest in user mode) has to be
made at kernel configuration time, so a given kernel binary can only
do one or the other.
This new book3s_hv code doesn't support MMIO emulation at present.
Since we are running paravirtualized guests, this isn't a serious
restriction.
With the guest running in supervisor mode, most exceptions go straight
to the guest. We will never get data or instruction storage or segment
interrupts, alignment interrupts, decrementer interrupts, program
interrupts, single-step interrupts, etc., coming to the hypervisor from
the guest. Therefore this introduces a new KVMTEST_NONHV macro for the
exception entry path so that we don't have to do the KVM test on entry
to those exception handlers.
We do however get hypervisor decrementer, hypervisor data storage,
hypervisor instruction storage, and hypervisor emulation assist
interrupts, so we have to handle those.
In hypervisor mode, real-mode accesses can access all of RAM, not just
a limited amount. Therefore we put all the guest state in the vcpu.arch
and use the shadow_vcpu in the PACA only for temporary scratch space.
We allocate the vcpu with kzalloc rather than vzalloc, and we don't use
anything in the kvmppc_vcpu_book3s struct, so we don't allocate it.
We don't have a shared page with the guest, but we still need a
kvm_vcpu_arch_shared struct to store the values of various registers,
so we include one in the vcpu_arch struct.
The POWER7 processor has a restriction that all threads in a core have
to be in the same partition. MMU-on kernel code counts as a partition
(partition 0), so we have to do a partition switch on every entry to and
exit from the guest. At present we require the host and guest to run
in single-thread mode because of this hardware restriction.
This code allocates a hashed page table for the guest and initializes
it with HPTEs for the guest's Virtual Real Memory Area (VRMA). We
require that the guest memory is allocated using 16MB huge pages, in
order to simplify the low-level memory management. This also means that
we can get away without tracking paging activity in the host for now,
since huge pages can't be paged or swapped.
This also adds a few new exports needed by the book3s_hv code.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:21:34 +08:00
|
|
|
#define SOFTEN_TEST_PR(vec) \
|
powerpc/64: Include KVM guest test in all interrupt vectors
Currently, if HV KVM is configured but PR KVM isn't, we don't include
a test to see whether we were interrupted in KVM guest context for the
set of interrupts which get delivered directly to the guest by hardware
if they occur in the guest. This includes things like program
interrupts.
However, the recent bug where userspace could set the MSR for a VCPU
to have an illegal value in the TS field, and thus cause a TM Bad Thing
type of program interrupt on the hrfid that enters the guest, showed that
we can never be completely sure that these interrupts can never occur
in the guest entry/exit code. If one of these interrupts does happen
and we have HV KVM configured but not PR KVM, then we end up trying to
run the handler in the host with the MMU set to the guest MMU context,
which generally ends badly.
Thus, for robustness it is better to have the test in every interrupt
vector, so that if some way is found to trigger some interrupt in the
guest entry/exit path, we can handle it without immediately crashing
the host.
This means that the distinction between KVMTEST and KVMTEST_PR goes
away. Thus we delete KVMTEST_PR and associated macros and use KVMTEST
everywhere that we previously used either KVMTEST_PR or KVMTEST. It
also means that SOFTEN_TEST_HV_201 becomes the same as SOFTEN_TEST_PR,
so we deleted SOFTEN_TEST_HV_201 and use SOFTEN_TEST_PR instead.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-12 13:44:42 +08:00
|
|
|
KVMTEST(vec); \
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
_SOFTEN_TEST(EXC_STD, vec)
|
2011-06-29 08:18:26 +08:00
|
|
|
|
|
|
|
|
#define SOFTEN_TEST_HV(vec) \
|
|
|
|
|
KVMTEST(vec); \
|
powerpc: Rework lazy-interrupt handling
The current implementation of lazy interrupts handling has some
issues that this tries to address.
We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.
The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.
Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.
This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.
The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.
When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.
We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).
This removes the need to play with the decrementer to try to create
fake interrupts, among others.
In addition, this adds a few refinements:
- We no longer hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.
- Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.
- On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)
- We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.
Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2:
- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
to retrigger an interrupt without preventing hard-enable
v3:
- Fix or vs. ori bug on Book3E
- Fix enabling of interrupts for some exceptions on Book3E
v4:
- Fix resend of doorbells on return from interrupt on Book3E
v5:
- Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.
v6:
- 32-bit compile fix
- more compile fixes with various .config combos
- factor out the asm code to soft-disable interrupts
- remove the C wrapper around preempt_schedule_irq
v7:
- Fix a bug with hard irq state tracking on native power7
2012-03-06 15:27:59 +08:00
|
|
|
_SOFTEN_TEST(EXC_HV, vec)
|
2011-06-29 08:18:26 +08:00
|
|
|
|
2012-11-02 14:21:28 +08:00
|
|
|
#define SOFTEN_NOTEST_PR(vec) _SOFTEN_TEST(EXC_STD, vec)
|
|
|
|
|
#define SOFTEN_NOTEST_HV(vec) _SOFTEN_TEST(EXC_HV, vec)
|
|
|
|
|
|
2011-06-29 08:18:26 +08:00
|
|
|
#define __MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra) \
|
|
|
|
|
SET_SCRATCH0(r13); /* save r13 */ \
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
EXCEPTION_PROLOG_0(PACA_EXGEN); \
|
|
|
|
|
__EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec); \
|
2011-06-29 08:18:26 +08:00
|
|
|
EXCEPTION_PROLOG_PSERIES_1(label##_common, h);
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
|
2011-06-29 08:18:26 +08:00
|
|
|
#define _MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra) \
|
|
|
|
|
__MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra)
|
2011-04-05 12:27:11 +08:00
|
|
|
|
|
|
|
|
#define MASKABLE_EXCEPTION_PSERIES(loc, vec, label) \
|
|
|
|
|
. = loc; \
|
|
|
|
|
.globl label##_pSeries; \
|
|
|
|
|
label##_pSeries: \
|
2011-06-29 08:18:26 +08:00
|
|
|
_MASKABLE_EXCEPTION_PSERIES(vec, label, \
|
KVM: PPC: Add support for Book3S processors in hypervisor mode
This adds support for KVM running on 64-bit Book 3S processors,
specifically POWER7, in hypervisor mode. Using hypervisor mode means
that the guest can use the processor's supervisor mode. That means
that the guest can execute privileged instructions and access privileged
registers itself without trapping to the host. This gives excellent
performance, but does mean that KVM cannot emulate a processor
architecture other than the one that the hardware implements.
This code assumes that the guest is running paravirtualized using the
PAPR (Power Architecture Platform Requirements) interface, which is the
interface that IBM's PowerVM hypervisor uses. That means that existing
Linux distributions that run on IBM pSeries machines will also run
under KVM without modification. In order to communicate the PAPR
hypercalls to qemu, this adds a new KVM_EXIT_PAPR_HCALL exit code
to include/linux/kvm.h.
Currently the choice between book3s_hv support and book3s_pr support
(i.e. the existing code, which runs the guest in user mode) has to be
made at kernel configuration time, so a given kernel binary can only
do one or the other.
This new book3s_hv code doesn't support MMIO emulation at present.
Since we are running paravirtualized guests, this isn't a serious
restriction.
With the guest running in supervisor mode, most exceptions go straight
to the guest. We will never get data or instruction storage or segment
interrupts, alignment interrupts, decrementer interrupts, program
interrupts, single-step interrupts, etc., coming to the hypervisor from
the guest. Therefore this introduces a new KVMTEST_NONHV macro for the
exception entry path so that we don't have to do the KVM test on entry
to those exception handlers.
We do however get hypervisor decrementer, hypervisor data storage,
hypervisor instruction storage, and hypervisor emulation assist
interrupts, so we have to handle those.
In hypervisor mode, real-mode accesses can access all of RAM, not just
a limited amount. Therefore we put all the guest state in the vcpu.arch
and use the shadow_vcpu in the PACA only for temporary scratch space.
We allocate the vcpu with kzalloc rather than vzalloc, and we don't use
anything in the kvmppc_vcpu_book3s struct, so we don't allocate it.
We don't have a shared page with the guest, but we still need a
kvm_vcpu_arch_shared struct to store the values of various registers,
so we include one in the vcpu_arch struct.
The POWER7 processor has a restriction that all threads in a core have
to be in the same partition. MMU-on kernel code counts as a partition
(partition 0), so we have to do a partition switch on every entry to and
exit from the guest. At present we require the host and guest to run
in single-thread mode because of this hardware restriction.
This code allocates a hashed page table for the guest and initializes
it with HPTEs for the guest's Virtual Real Memory Area (VRMA). We
require that the guest memory is allocated using 16MB huge pages, in
order to simplify the low-level memory management. This also means that
we can get away without tracking paging activity in the host for now,
since huge pages can't be paged or swapped.
This also adds a few new exports needed by the book3s_hv code.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:21:34 +08:00
|
|
|
EXC_STD, SOFTEN_TEST_PR)
|
2011-04-05 12:27:11 +08:00
|
|
|
|
|
|
|
|
#define MASKABLE_EXCEPTION_HV(loc, vec, label) \
|
|
|
|
|
. = loc; \
|
|
|
|
|
.globl label##_hv; \
|
|
|
|
|
label##_hv: \
|
2011-06-29 08:18:26 +08:00
|
|
|
_MASKABLE_EXCEPTION_PSERIES(vec, label, \
|
|
|
|
|
EXC_HV, SOFTEN_TEST_HV)
|
2007-08-22 11:46:44 +08:00
|
|
|
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
#define MASKABLE_EXCEPTION_HV_OOL(vec, label) \
|
|
|
|
|
.globl label##_hv; \
|
|
|
|
|
label##_hv: \
|
|
|
|
|
EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_TEST_HV, vec); \
|
|
|
|
|
EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_HV);
|
|
|
|
|
|
2012-11-02 14:21:28 +08:00
|
|
|
#define __MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra) \
|
|
|
|
|
SET_SCRATCH0(r13); /* save r13 */ \
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
EXCEPTION_PROLOG_0(PACA_EXGEN); \
|
2012-11-02 14:21:28 +08:00
|
|
|
__EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec); \
|
|
|
|
|
EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, h);
|
|
|
|
|
#define _MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra) \
|
|
|
|
|
__MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)
|
|
|
|
|
|
|
|
|
|
#define MASKABLE_RELON_EXCEPTION_PSERIES(loc, vec, label) \
|
|
|
|
|
. = loc; \
|
|
|
|
|
.globl label##_relon_pSeries; \
|
|
|
|
|
label##_relon_pSeries: \
|
|
|
|
|
_MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, \
|
|
|
|
|
EXC_STD, SOFTEN_NOTEST_PR)
|
|
|
|
|
|
|
|
|
|
#define MASKABLE_RELON_EXCEPTION_HV(loc, vec, label) \
|
|
|
|
|
. = loc; \
|
|
|
|
|
.globl label##_relon_hv; \
|
|
|
|
|
label##_relon_hv: \
|
|
|
|
|
_MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, \
|
|
|
|
|
EXC_HV, SOFTEN_NOTEST_HV)
|
|
|
|
|
|
powerpc: Save CFAR before branching in interrupt entry paths
Some of the interrupt vectors on 64-bit POWER server processors are
only 32 bytes long, which is not enough for the full first-level
interrupt handler. For these we currently just have a branch to an
out-of-line handler. However, this means that we corrupt the CFAR
(come-from address register) on POWER7 and later processors.
To fix this, we split the EXCEPTION_PROLOG_1 macro into two pieces:
EXCEPTION_PROLOG_0 contains the part up to the point where the CFAR
is saved in the PACA, and EXCEPTION_PROLOG_1 contains the rest. We
then put EXCEPTION_PROLOG_0 in the short interrupt vectors before
we branch to the out-of-line handler, which contains the rest of the
first-level interrupt handler. To facilitate this, we define new
_OOL (out of line) variants of STD_EXCEPTION_PSERIES, etc.
In order to get EXCEPTION_PROLOG_0 to be short enough, i.e., no more
than 6 instructions, it was necessary to move the stores that move
the PPR and CFAR values into the PACA into __EXCEPTION_PROLOG_1 and
to get rid of one of the two HMT_MEDIUM instructions. Previously
there was a HMT_MEDIUM_PPR_DISCARD before the prolog, which was
nop'd out on processors with the PPR (POWER7 and later), and then
another HMT_MEDIUM inside the HMT_MEDIUM_PPR_SAVE macro call inside
__EXCEPTION_PROLOG_1, which was nop'd out on processors without PPR.
Now the HMT_MEDIUM inside EXCEPTION_PROLOG_0 is there unconditionally
and the HMT_MEDIUM_PPR_DISCARD is not strictly necessary, although
this leaves it in for the interrupt vectors where there is room for
it.
Previously we had a handler for hypervisor maintenance interrupts at
0xe50, which doesn't leave enough room for the vector for hypervisor
emulation assist interrupts at 0xe40, since we need 8 instructions.
The 0xe50 vector was only used on POWER6, as the HMI vector was moved
to 0xe60 on POWER7. Since we don't support running in hypervisor mode
on POWER6, we just remove the handler at 0xe50.
This also changes denorm_exception_hv to use EXCEPTION_PROLOG_0
instead of open-coding it, and removes the HMT_MEDIUM_PPR_DISCARD
from the relocation-on vectors (since any CPU that supports
relocation-on interrupts also has the PPR).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-05 02:10:15 +08:00
|
|
|
#define MASKABLE_RELON_EXCEPTION_HV_OOL(vec, label) \
|
|
|
|
|
.globl label##_relon_hv; \
|
|
|
|
|
label##_relon_hv: \
|
|
|
|
|
EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_NOTEST_HV, vec); \
|
|
|
|
|
EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_HV);
|
|
|
|
|
|
2012-03-01 12:42:56 +08:00
|
|
|
/*
|
|
|
|
|
* Our exception common code can be passed various "additions"
|
|
|
|
|
* to specify the behaviour of interrupts, whether to kick the
|
|
|
|
|
* runlatch, etc...
|
|
|
|
|
*/
|
|
|
|
|
|
2014-07-15 19:15:38 +08:00
|
|
|
/*
|
|
|
|
|
* This addition reconciles our actual IRQ state with the various software
|
|
|
|
|
* flags that track it. This may call C code.
|
|
|
|
|
*/
|
|
|
|
|
#define ADD_RECONCILE RECONCILE_IRQ_STATE(r10,r11)
|
2007-08-22 11:46:44 +08:00
|
|
|
|
2012-03-01 09:45:27 +08:00
|
|
|
#define ADD_NVGPRS \
|
2014-02-04 13:04:35 +08:00
|
|
|
bl save_nvgprs
|
2012-03-01 09:45:27 +08:00
|
|
|
|
|
|
|
|
#define RUNLATCH_ON \
|
|
|
|
|
BEGIN_FTR_SECTION \
|
2012-07-05 12:41:35 +08:00
|
|
|
CURRENT_THREAD_INFO(r3, r1); \
|
2012-03-01 09:45:27 +08:00
|
|
|
ld r4,TI_LOCAL_FLAGS(r3); \
|
|
|
|
|
andi. r0,r4,_TLF_RUNLATCH; \
|
|
|
|
|
beql ppc64_runlatch_on_trampoline; \
|
|
|
|
|
END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
|
|
|
|
|
|
|
|
|
|
#define EXCEPTION_COMMON(trap, label, hdlr, ret, additions) \
|
|
|
|
|
.align 7; \
|
|
|
|
|
.globl label##_common; \
|
|
|
|
|
label##_common: \
|
|
|
|
|
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
|
2014-07-15 19:15:37 +08:00
|
|
|
/* Volatile regs are potentially clobbered here */ \
|
2012-03-01 09:45:27 +08:00
|
|
|
additions; \
|
|
|
|
|
addi r3,r1,STACK_FRAME_OVERHEAD; \
|
|
|
|
|
bl hdlr; \
|
|
|
|
|
b ret
|
|
|
|
|
|
|
|
|
|
#define STD_EXCEPTION_COMMON(trap, label, hdlr) \
|
|
|
|
|
EXCEPTION_COMMON(trap, label, hdlr, ret_from_except, \
|
2014-07-15 19:15:38 +08:00
|
|
|
ADD_NVGPRS;ADD_RECONCILE)
|
2007-08-22 11:46:44 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Like STD_EXCEPTION_COMMON, but for exceptions that can occur
|
2012-03-01 07:52:01 +08:00
|
|
|
* in the idle task and therefore need the special idle handling
|
|
|
|
|
* (finish nap and runlatch)
|
2007-08-22 11:46:44 +08:00
|
|
|
*/
|
2012-03-01 09:45:27 +08:00
|
|
|
#define STD_EXCEPTION_COMMON_ASYNC(trap, label, hdlr) \
|
|
|
|
|
EXCEPTION_COMMON(trap, label, hdlr, ret_from_except_lite, \
|
2014-07-15 19:15:38 +08:00
|
|
|
FINISH_NAP;ADD_RECONCILE;RUNLATCH_ON)
|
2007-08-22 11:46:44 +08:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* When the idle code in power4_idle puts the CPU into NAP mode,
|
|
|
|
|
* it has to do so in a loop, and relies on the external interrupt
|
|
|
|
|
* and decrementer interrupt entry code to get it out of the loop.
|
|
|
|
|
* It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
|
|
|
|
|
* to signal that it is in the loop and needs help to get out.
|
|
|
|
|
*/
|
|
|
|
|
#ifdef CONFIG_PPC_970_NAP
|
|
|
|
|
#define FINISH_NAP \
|
|
|
|
|
BEGIN_FTR_SECTION \
|
2012-07-05 12:41:35 +08:00
|
|
|
CURRENT_THREAD_INFO(r11, r1); \
|
2007-08-22 11:46:44 +08:00
|
|
|
ld r9,TI_LOCAL_FLAGS(r11); \
|
|
|
|
|
andi. r10,r9,_TLF_NAPPING; \
|
|
|
|
|
bnel power4_fixup_nap; \
|
|
|
|
|
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
|
|
|
|
|
#else
|
|
|
|
|
#define FINISH_NAP
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#endif /* _ASM_POWERPC_EXCEPTION_H */
|