2014-02-26 00:25:22 +08:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2014 Ezequiel Garcia
|
|
|
|
* Copyright (c) 2011 Free Electrons
|
|
|
|
*
|
|
|
|
* Driver parameter handling strongly based on drivers/mtd/ubi/build.c
|
|
|
|
* Copyright (c) International Business Machines Corp., 2006
|
|
|
|
* Copyright (c) Nokia Corporation, 2007
|
|
|
|
* Authors: Artem Bityutskiy, Frank Haverkamp
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation, version 2.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
|
|
|
|
* the GNU General Public License for more details.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Read-only block devices on top of UBI volumes
|
|
|
|
*
|
|
|
|
* A simple implementation to allow a block device to be layered on top of a
|
|
|
|
* UBI volume. The implementation is provided by creating a static 1-to-1
|
|
|
|
* mapping between the block device and the UBI volume.
|
|
|
|
*
|
|
|
|
* The addressed byte is obtained from the addressed block sector, which is
|
|
|
|
* mapped linearly into the corresponding LEB:
|
|
|
|
*
|
|
|
|
* LEB number = addressed byte / LEB size
|
|
|
|
*
|
2014-03-04 18:00:26 +08:00
|
|
|
* This feature is compiled in the UBI core, and adds a 'block' parameter
|
|
|
|
* to allow early creation of block devices on top of UBI volumes. Runtime
|
|
|
|
* block creation/removal for UBI volumes is provided through two UBI ioctls:
|
2014-03-05 19:01:56 +08:00
|
|
|
* UBI_IOCVOLCRBLK and UBI_IOCVOLRMBLK.
|
2014-02-26 00:25:22 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/mutex.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/mtd/ubi.h>
|
|
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <linux/blkdev.h>
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
#include <linux/blk-mq.h>
|
2014-02-26 00:25:22 +08:00
|
|
|
#include <linux/hdreg.h>
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
#include <linux/scatterlist.h>
|
2015-03-18 01:37:26 +08:00
|
|
|
#include <linux/idr.h>
|
2014-02-26 00:25:22 +08:00
|
|
|
#include <asm/div64.h>
|
|
|
|
|
|
|
|
#include "ubi-media.h"
|
|
|
|
#include "ubi.h"
|
|
|
|
|
|
|
|
/* Maximum number of supported devices */
|
|
|
|
#define UBIBLOCK_MAX_DEVICES 32
|
|
|
|
|
|
|
|
/* Maximum length of the 'block=' parameter */
|
|
|
|
#define UBIBLOCK_PARAM_LEN 63
|
|
|
|
|
|
|
|
/* Maximum number of comma-separated items in the 'block=' parameter */
|
|
|
|
#define UBIBLOCK_PARAM_COUNT 2
|
|
|
|
|
|
|
|
struct ubiblock_param {
|
|
|
|
int ubi_num;
|
|
|
|
int vol_id;
|
|
|
|
char name[UBIBLOCK_PARAM_LEN+1];
|
|
|
|
};
|
|
|
|
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
struct ubiblock_pdu {
|
|
|
|
struct work_struct work;
|
|
|
|
struct ubi_sgl usgl;
|
|
|
|
};
|
|
|
|
|
2014-02-26 00:25:22 +08:00
|
|
|
/* Numbers of elements set in the @ubiblock_param array */
|
|
|
|
static int ubiblock_devs __initdata;
|
|
|
|
|
|
|
|
/* MTD devices specification parameters */
|
|
|
|
static struct ubiblock_param ubiblock_param[UBIBLOCK_MAX_DEVICES] __initdata;
|
|
|
|
|
|
|
|
struct ubiblock {
|
|
|
|
struct ubi_volume_desc *desc;
|
|
|
|
int ubi_num;
|
|
|
|
int vol_id;
|
|
|
|
int refcnt;
|
|
|
|
int leb_size;
|
|
|
|
|
|
|
|
struct gendisk *gd;
|
|
|
|
struct request_queue *rq;
|
|
|
|
|
|
|
|
struct workqueue_struct *wq;
|
|
|
|
|
|
|
|
struct mutex dev_mutex;
|
|
|
|
struct list_head list;
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
struct blk_mq_tag_set tag_set;
|
2014-02-26 00:25:22 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/* Linked list of all ubiblock instances */
|
|
|
|
static LIST_HEAD(ubiblock_devices);
|
|
|
|
static DEFINE_MUTEX(devices_mutex);
|
|
|
|
static int ubiblock_major;
|
|
|
|
|
|
|
|
static int __init ubiblock_set_param(const char *val,
|
|
|
|
const struct kernel_param *kp)
|
|
|
|
{
|
|
|
|
int i, ret;
|
|
|
|
size_t len;
|
|
|
|
struct ubiblock_param *param;
|
|
|
|
char buf[UBIBLOCK_PARAM_LEN];
|
|
|
|
char *pbuf = &buf[0];
|
|
|
|
char *tokens[UBIBLOCK_PARAM_COUNT];
|
|
|
|
|
|
|
|
if (!val)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
len = strnlen(val, UBIBLOCK_PARAM_LEN);
|
|
|
|
if (len == 0) {
|
2014-10-21 00:57:00 +08:00
|
|
|
pr_warn("UBI: block: empty 'block=' parameter - ignored\n");
|
2014-02-26 00:25:22 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (len == UBIBLOCK_PARAM_LEN) {
|
2014-10-21 00:57:00 +08:00
|
|
|
pr_err("UBI: block: parameter \"%s\" is too long, max. is %d\n",
|
|
|
|
val, UBIBLOCK_PARAM_LEN);
|
2014-02-26 00:25:22 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
strcpy(buf, val);
|
|
|
|
|
|
|
|
/* Get rid of the final newline */
|
|
|
|
if (buf[len - 1] == '\n')
|
|
|
|
buf[len - 1] = '\0';
|
|
|
|
|
|
|
|
for (i = 0; i < UBIBLOCK_PARAM_COUNT; i++)
|
|
|
|
tokens[i] = strsep(&pbuf, ",");
|
|
|
|
|
|
|
|
param = &ubiblock_param[ubiblock_devs];
|
|
|
|
if (tokens[1]) {
|
|
|
|
/* Two parameters: can be 'ubi, vol_id' or 'ubi, vol_name' */
|
|
|
|
ret = kstrtoint(tokens[0], 10, ¶m->ubi_num);
|
|
|
|
if (ret < 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* Second param can be a number or a name */
|
|
|
|
ret = kstrtoint(tokens[1], 10, ¶m->vol_id);
|
|
|
|
if (ret < 0) {
|
|
|
|
param->vol_id = -1;
|
|
|
|
strcpy(param->name, tokens[1]);
|
|
|
|
}
|
|
|
|
|
|
|
|
} else {
|
|
|
|
/* One parameter: must be device path */
|
|
|
|
strcpy(param->name, tokens[0]);
|
|
|
|
param->ubi_num = -1;
|
|
|
|
param->vol_id = -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
ubiblock_devs++;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-05-27 09:39:38 +08:00
|
|
|
static const struct kernel_param_ops ubiblock_param_ops = {
|
2014-02-26 00:25:22 +08:00
|
|
|
.set = ubiblock_set_param,
|
|
|
|
};
|
|
|
|
module_param_cb(block, &ubiblock_param_ops, NULL, 0);
|
|
|
|
MODULE_PARM_DESC(block, "Attach block devices to UBI volumes. Parameter format: block=<path|dev,num|dev,name>.\n"
|
|
|
|
"Multiple \"block\" parameters may be specified.\n"
|
|
|
|
"UBI volumes may be specified by their number, name, or path to the device node.\n"
|
|
|
|
"Examples\n"
|
|
|
|
"Using the UBI volume path:\n"
|
|
|
|
"ubi.block=/dev/ubi0_0\n"
|
|
|
|
"Using the UBI device, and the volume name:\n"
|
|
|
|
"ubi.block=0,rootfs\n"
|
|
|
|
"Using both UBI device number and UBI volume number:\n"
|
|
|
|
"ubi.block=0,0\n");
|
|
|
|
|
|
|
|
static struct ubiblock *find_dev_nolock(int ubi_num, int vol_id)
|
|
|
|
{
|
|
|
|
struct ubiblock *dev;
|
|
|
|
|
|
|
|
list_for_each_entry(dev, &ubiblock_devices, list)
|
|
|
|
if (dev->ubi_num == ubi_num && dev->vol_id == vol_id)
|
|
|
|
return dev;
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
static int ubiblock_read(struct ubiblock_pdu *pdu)
|
2014-02-26 00:25:22 +08:00
|
|
|
{
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
int ret, leb, offset, bytes_left, to_read;
|
|
|
|
u64 pos;
|
|
|
|
struct request *req = blk_mq_rq_from_pdu(pdu);
|
|
|
|
struct ubiblock *dev = req->q->queuedata;
|
2014-02-26 00:25:22 +08:00
|
|
|
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
to_read = blk_rq_bytes(req);
|
|
|
|
pos = blk_rq_pos(req) << 9;
|
2014-02-26 00:25:22 +08:00
|
|
|
|
|
|
|
/* Get LEB:offset address to read from */
|
|
|
|
offset = do_div(pos, dev->leb_size);
|
|
|
|
leb = pos;
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
bytes_left = to_read;
|
2014-02-26 00:25:22 +08:00
|
|
|
|
|
|
|
while (bytes_left) {
|
|
|
|
/*
|
|
|
|
* We can only read one LEB at a time. Therefore if the read
|
|
|
|
* length is larger than one LEB size, we split the operation.
|
|
|
|
*/
|
|
|
|
if (offset + to_read > dev->leb_size)
|
|
|
|
to_read = dev->leb_size - offset;
|
|
|
|
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
ret = ubi_read_sg(dev->desc, leb, &pdu->usgl, offset, to_read);
|
|
|
|
if (ret < 0)
|
2014-02-26 00:25:22 +08:00
|
|
|
return ret;
|
|
|
|
|
|
|
|
bytes_left -= to_read;
|
|
|
|
to_read = bytes_left;
|
|
|
|
leb += 1;
|
|
|
|
offset = 0;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ubiblock_open(struct block_device *bdev, fmode_t mode)
|
|
|
|
{
|
|
|
|
struct ubiblock *dev = bdev->bd_disk->private_data;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
mutex_lock(&dev->dev_mutex);
|
|
|
|
if (dev->refcnt > 0) {
|
|
|
|
/*
|
|
|
|
* The volume is already open, just increase the reference
|
|
|
|
* counter.
|
|
|
|
*/
|
|
|
|
goto out_done;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We want users to be aware they should only mount us as read-only.
|
|
|
|
* It's just a paranoid check, as write requests will get rejected
|
|
|
|
* in any case.
|
|
|
|
*/
|
|
|
|
if (mode & FMODE_WRITE) {
|
|
|
|
ret = -EPERM;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->desc = ubi_open_volume(dev->ubi_num, dev->vol_id, UBI_READONLY);
|
|
|
|
if (IS_ERR(dev->desc)) {
|
2014-10-21 00:57:00 +08:00
|
|
|
dev_err(disk_to_dev(dev->gd), "failed to open ubi volume %d_%d",
|
|
|
|
dev->ubi_num, dev->vol_id);
|
2014-02-26 00:25:22 +08:00
|
|
|
ret = PTR_ERR(dev->desc);
|
|
|
|
dev->desc = NULL;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
|
|
|
|
|
|
|
out_done:
|
|
|
|
dev->refcnt++;
|
|
|
|
mutex_unlock(&dev->dev_mutex);
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_unlock:
|
|
|
|
mutex_unlock(&dev->dev_mutex);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ubiblock_release(struct gendisk *gd, fmode_t mode)
|
|
|
|
{
|
|
|
|
struct ubiblock *dev = gd->private_data;
|
|
|
|
|
|
|
|
mutex_lock(&dev->dev_mutex);
|
|
|
|
dev->refcnt--;
|
|
|
|
if (dev->refcnt == 0) {
|
|
|
|
ubi_close_volume(dev->desc);
|
|
|
|
dev->desc = NULL;
|
|
|
|
}
|
|
|
|
mutex_unlock(&dev->dev_mutex);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ubiblock_getgeo(struct block_device *bdev, struct hd_geometry *geo)
|
|
|
|
{
|
|
|
|
/* Some tools might require this information */
|
|
|
|
geo->heads = 1;
|
|
|
|
geo->cylinders = 1;
|
|
|
|
geo->sectors = get_capacity(bdev->bd_disk);
|
|
|
|
geo->start = 0;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct block_device_operations ubiblock_ops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.open = ubiblock_open,
|
|
|
|
.release = ubiblock_release,
|
|
|
|
.getgeo = ubiblock_getgeo,
|
|
|
|
};
|
|
|
|
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
static void ubiblock_do_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct ubiblock_pdu *pdu = container_of(work, struct ubiblock_pdu, work);
|
|
|
|
struct request *req = blk_mq_rq_from_pdu(pdu);
|
|
|
|
|
|
|
|
blk_mq_start_request(req);
|
2015-01-28 23:37:40 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* It is safe to ignore the return value of blk_rq_map_sg() because
|
|
|
|
* the number of sg entries is limited to UBI_MAX_SG_COUNT
|
|
|
|
* and ubi_read_sg() will check that limit.
|
|
|
|
*/
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
blk_rq_map_sg(req->q, req, pdu->usgl.sg);
|
|
|
|
|
|
|
|
ret = ubiblock_read(pdu);
|
2015-04-22 20:30:53 +08:00
|
|
|
rq_flush_dcache_pages(req);
|
|
|
|
|
2017-06-03 15:38:04 +08:00
|
|
|
blk_mq_end_request(req, errno_to_blk_status(ret));
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
}
|
|
|
|
|
2017-06-03 15:38:05 +08:00
|
|
|
static blk_status_t ubiblock_queue_rq(struct blk_mq_hw_ctx *hctx,
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
const struct blk_mq_queue_data *bd)
|
|
|
|
{
|
|
|
|
struct request *req = bd->rq;
|
|
|
|
struct ubiblock *dev = hctx->queue->queuedata;
|
|
|
|
struct ubiblock_pdu *pdu = blk_mq_rq_to_pdu(req);
|
|
|
|
|
2017-01-31 23:57:31 +08:00
|
|
|
switch (req_op(req)) {
|
|
|
|
case REQ_OP_READ:
|
|
|
|
ubi_sgl_init(&pdu->usgl);
|
|
|
|
queue_work(dev->wq, &pdu->work);
|
2017-06-03 15:38:05 +08:00
|
|
|
return BLK_STS_OK;
|
2017-01-31 23:57:31 +08:00
|
|
|
default:
|
2017-06-03 15:38:05 +08:00
|
|
|
return BLK_STS_IOERR;
|
2017-01-31 23:57:31 +08:00
|
|
|
}
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
|
|
|
|
}
|
|
|
|
|
2017-05-02 00:19:08 +08:00
|
|
|
static int ubiblock_init_request(struct blk_mq_tag_set *set,
|
|
|
|
struct request *req, unsigned int hctx_idx,
|
|
|
|
unsigned int numa_node)
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
{
|
|
|
|
struct ubiblock_pdu *pdu = blk_mq_rq_to_pdu(req);
|
|
|
|
|
|
|
|
sg_init_table(pdu->usgl.sg, UBI_MAX_SG_COUNT);
|
|
|
|
INIT_WORK(&pdu->work, ubiblock_do_work);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-03-31 04:39:16 +08:00
|
|
|
static const struct blk_mq_ops ubiblock_mq_ops = {
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
.queue_rq = ubiblock_queue_rq,
|
|
|
|
.init_request = ubiblock_init_request,
|
|
|
|
};
|
|
|
|
|
2015-03-18 01:37:26 +08:00
|
|
|
static DEFINE_IDR(ubiblock_minor_idr);
|
|
|
|
|
2014-03-04 18:00:26 +08:00
|
|
|
int ubiblock_create(struct ubi_volume_info *vi)
|
2014-02-26 00:25:22 +08:00
|
|
|
{
|
|
|
|
struct ubiblock *dev;
|
|
|
|
struct gendisk *gd;
|
UBI: block: Fix block device size setting
We are currently taking the block device size from the ubi_volume_info.size
field. However, this is not the amount of data in the volume, but the
number of reserved physical eraseblocks, and hence leads to an incorrect
representation of the volume.
In particular, this produces I/O errors on static volumes as the block
interface may attempt to read unmapped PEBs:
$ cat /dev/ubiblock0_0 > /dev/null
UBI error: ubiblock_read_to_buf: ubiblock0_0 ubi_read error -22
end_request: I/O error, dev ubiblock0_0, sector 9536
Buffer I/O error on device ubiblock0_0, logical block 2384
[snip]
Fix this by using the ubi_volume_info.used_bytes field which is set to the
actual number of data bytes for both static and dynamic volumes.
While here, improve the error message to be less stupid and more useful:
UBI error: ubiblock_read_to_buf: ubiblock0_1 ubi_read error -9 on LEB=0, off=15872, len=512
It's worth noticing that the 512-byte sector representation of the volume
is only correct if the volume size is multiple of 512-bytes. This is true for
virtually any NAND device, given eraseblocks and pages are 512-byte multiple
and hence so is the LEB size.
Artem: tweak the error message and make it look more like other UBI error
messages.
Fixes: 9d54c8a33eec ("UBI: R/O block driver on top of UBI volumes")
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: stable@vger.kernel.org # v3.15+
2014-08-30 05:42:28 +08:00
|
|
|
u64 disk_capacity = vi->used_bytes >> 9;
|
2014-02-26 00:25:22 +08:00
|
|
|
int ret;
|
|
|
|
|
2014-05-05 18:11:54 +08:00
|
|
|
if ((sector_t)disk_capacity != disk_capacity)
|
|
|
|
return -EFBIG;
|
2014-02-26 00:25:22 +08:00
|
|
|
/* Check that the volume isn't already handled */
|
|
|
|
mutex_lock(&devices_mutex);
|
|
|
|
if (find_dev_nolock(vi->ubi_num, vi->vol_id)) {
|
|
|
|
mutex_unlock(&devices_mutex);
|
|
|
|
return -EEXIST;
|
|
|
|
}
|
|
|
|
mutex_unlock(&devices_mutex);
|
|
|
|
|
|
|
|
dev = kzalloc(sizeof(struct ubiblock), GFP_KERNEL);
|
|
|
|
if (!dev)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
mutex_init(&dev->dev_mutex);
|
|
|
|
|
|
|
|
dev->ubi_num = vi->ubi_num;
|
|
|
|
dev->vol_id = vi->vol_id;
|
|
|
|
dev->leb_size = vi->usable_leb_size;
|
|
|
|
|
|
|
|
/* Initialize the gendisk of this ubiblock device */
|
|
|
|
gd = alloc_disk(1);
|
|
|
|
if (!gd) {
|
2017-07-26 17:53:50 +08:00
|
|
|
pr_err("UBI: block: alloc_disk failed\n");
|
2014-02-26 00:25:22 +08:00
|
|
|
ret = -ENODEV;
|
|
|
|
goto out_free_dev;
|
|
|
|
}
|
|
|
|
|
|
|
|
gd->fops = &ubiblock_ops;
|
|
|
|
gd->major = ubiblock_major;
|
2015-03-18 01:37:26 +08:00
|
|
|
gd->first_minor = idr_alloc(&ubiblock_minor_idr, dev, 0, 0, GFP_KERNEL);
|
|
|
|
if (gd->first_minor < 0) {
|
|
|
|
dev_err(disk_to_dev(gd),
|
|
|
|
"block: dynamic minor allocation failed");
|
|
|
|
ret = -ENODEV;
|
|
|
|
goto out_put_disk;
|
|
|
|
}
|
2014-02-26 00:25:22 +08:00
|
|
|
gd->private_data = dev;
|
|
|
|
sprintf(gd->disk_name, "ubiblock%d_%d", dev->ubi_num, dev->vol_id);
|
|
|
|
set_capacity(gd, disk_capacity);
|
|
|
|
dev->gd = gd;
|
|
|
|
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
dev->tag_set.ops = &ubiblock_mq_ops;
|
|
|
|
dev->tag_set.queue_depth = 64;
|
|
|
|
dev->tag_set.numa_node = NUMA_NO_NODE;
|
|
|
|
dev->tag_set.flags = BLK_MQ_F_SHOULD_MERGE;
|
|
|
|
dev->tag_set.cmd_size = sizeof(struct ubiblock_pdu);
|
|
|
|
dev->tag_set.driver_data = dev;
|
|
|
|
dev->tag_set.nr_hw_queues = 1;
|
|
|
|
|
|
|
|
ret = blk_mq_alloc_tag_set(&dev->tag_set);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(disk_to_dev(dev->gd), "blk_mq_alloc_tag_set failed");
|
2015-03-18 01:37:26 +08:00
|
|
|
goto out_remove_minor;
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
dev->rq = blk_mq_init_queue(&dev->tag_set);
|
2015-02-05 15:38:19 +08:00
|
|
|
if (IS_ERR(dev->rq)) {
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
dev_err(disk_to_dev(gd), "blk_mq_init_queue failed");
|
2015-02-05 15:38:19 +08:00
|
|
|
ret = PTR_ERR(dev->rq);
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
goto out_free_tags;
|
2014-02-26 00:25:22 +08:00
|
|
|
}
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
blk_queue_max_segments(dev->rq, UBI_MAX_SG_COUNT);
|
2014-02-26 00:25:22 +08:00
|
|
|
|
|
|
|
dev->rq->queuedata = dev;
|
|
|
|
dev->gd->queue = dev->rq;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Create one workqueue per volume (per registered block device).
|
|
|
|
* Rembember workqueues are cheap, they're not threads.
|
|
|
|
*/
|
2014-04-08 12:44:07 +08:00
|
|
|
dev->wq = alloc_workqueue("%s", 0, 0, gd->disk_name);
|
2014-05-20 17:13:48 +08:00
|
|
|
if (!dev->wq) {
|
|
|
|
ret = -ENOMEM;
|
2014-02-26 00:25:22 +08:00
|
|
|
goto out_free_queue;
|
2014-05-20 17:13:48 +08:00
|
|
|
}
|
2014-02-26 00:25:22 +08:00
|
|
|
|
|
|
|
mutex_lock(&devices_mutex);
|
|
|
|
list_add_tail(&dev->list, &ubiblock_devices);
|
|
|
|
mutex_unlock(&devices_mutex);
|
|
|
|
|
|
|
|
/* Must be the last step: anyone can call file ops from now on */
|
|
|
|
add_disk(dev->gd);
|
2014-10-21 00:57:00 +08:00
|
|
|
dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)",
|
|
|
|
dev->ubi_num, dev->vol_id, vi->name);
|
2014-02-26 00:25:22 +08:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_free_queue:
|
|
|
|
blk_cleanup_queue(dev->rq);
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
out_free_tags:
|
|
|
|
blk_mq_free_tag_set(&dev->tag_set);
|
2015-03-18 01:37:26 +08:00
|
|
|
out_remove_minor:
|
|
|
|
idr_remove(&ubiblock_minor_idr, gd->first_minor);
|
2014-02-26 00:25:22 +08:00
|
|
|
out_put_disk:
|
|
|
|
put_disk(dev->gd);
|
|
|
|
out_free_dev:
|
|
|
|
kfree(dev);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ubiblock_cleanup(struct ubiblock *dev)
|
|
|
|
{
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
/* Stop new requests to arrive */
|
2014-02-26 00:25:22 +08:00
|
|
|
del_gendisk(dev->gd);
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
/* Flush pending work */
|
|
|
|
destroy_workqueue(dev->wq);
|
|
|
|
/* Finally destroy the blk queue */
|
2014-02-26 00:25:22 +08:00
|
|
|
blk_cleanup_queue(dev->rq);
|
UBI: Block: Add blk-mq support
Convert the driver to blk-mq.
Beside of moving to the modern block interface this change boosts
also the performance of the driver.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 4.39295 s, 58.1 MB/s
vs.
root@debian-armhf:~# dd if=/dev/ubiblock0_0 of=/dev/zero bs=1M
243+1 records in
243+1 records out
255080448 bytes (255 MB) copied, 2.87676 s, 88.7 MB/s
Cc: hch@infradead.org
Cc: axboe@fb.com
Cc: tom.leiming@gmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jens Axboe <axboe@fb.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-01-11 05:52:14 +08:00
|
|
|
blk_mq_free_tag_set(&dev->tag_set);
|
2014-10-21 00:57:00 +08:00
|
|
|
dev_info(disk_to_dev(dev->gd), "released");
|
2015-03-18 01:37:26 +08:00
|
|
|
idr_remove(&ubiblock_minor_idr, dev->gd->first_minor);
|
2014-02-26 00:25:22 +08:00
|
|
|
put_disk(dev->gd);
|
|
|
|
}
|
|
|
|
|
2014-03-04 18:00:26 +08:00
|
|
|
int ubiblock_remove(struct ubi_volume_info *vi)
|
2014-02-26 00:25:22 +08:00
|
|
|
{
|
|
|
|
struct ubiblock *dev;
|
|
|
|
|
|
|
|
mutex_lock(&devices_mutex);
|
|
|
|
dev = find_dev_nolock(vi->ubi_num, vi->vol_id);
|
|
|
|
if (!dev) {
|
|
|
|
mutex_unlock(&devices_mutex);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Found a device, let's lock it so we can check if it's busy */
|
|
|
|
mutex_lock(&dev->dev_mutex);
|
|
|
|
if (dev->refcnt > 0) {
|
|
|
|
mutex_unlock(&dev->dev_mutex);
|
|
|
|
mutex_unlock(&devices_mutex);
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Remove from device list */
|
|
|
|
list_del(&dev->list);
|
|
|
|
mutex_unlock(&devices_mutex);
|
|
|
|
|
|
|
|
ubiblock_cleanup(dev);
|
|
|
|
mutex_unlock(&dev->dev_mutex);
|
|
|
|
kfree(dev);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-05-05 18:11:52 +08:00
|
|
|
static int ubiblock_resize(struct ubi_volume_info *vi)
|
2014-02-26 00:25:22 +08:00
|
|
|
{
|
|
|
|
struct ubiblock *dev;
|
UBI: block: Fix block device size setting
We are currently taking the block device size from the ubi_volume_info.size
field. However, this is not the amount of data in the volume, but the
number of reserved physical eraseblocks, and hence leads to an incorrect
representation of the volume.
In particular, this produces I/O errors on static volumes as the block
interface may attempt to read unmapped PEBs:
$ cat /dev/ubiblock0_0 > /dev/null
UBI error: ubiblock_read_to_buf: ubiblock0_0 ubi_read error -22
end_request: I/O error, dev ubiblock0_0, sector 9536
Buffer I/O error on device ubiblock0_0, logical block 2384
[snip]
Fix this by using the ubi_volume_info.used_bytes field which is set to the
actual number of data bytes for both static and dynamic volumes.
While here, improve the error message to be less stupid and more useful:
UBI error: ubiblock_read_to_buf: ubiblock0_1 ubi_read error -9 on LEB=0, off=15872, len=512
It's worth noticing that the 512-byte sector representation of the volume
is only correct if the volume size is multiple of 512-bytes. This is true for
virtually any NAND device, given eraseblocks and pages are 512-byte multiple
and hence so is the LEB size.
Artem: tweak the error message and make it look more like other UBI error
messages.
Fixes: 9d54c8a33eec ("UBI: R/O block driver on top of UBI volumes")
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: stable@vger.kernel.org # v3.15+
2014-08-30 05:42:28 +08:00
|
|
|
u64 disk_capacity = vi->used_bytes >> 9;
|
2014-02-26 00:25:22 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Need to lock the device list until we stop using the device,
|
2014-03-04 18:00:26 +08:00
|
|
|
* otherwise the device struct might get released in
|
|
|
|
* 'ubiblock_remove()'.
|
2014-02-26 00:25:22 +08:00
|
|
|
*/
|
|
|
|
mutex_lock(&devices_mutex);
|
|
|
|
dev = find_dev_nolock(vi->ubi_num, vi->vol_id);
|
|
|
|
if (!dev) {
|
|
|
|
mutex_unlock(&devices_mutex);
|
2014-05-05 18:11:52 +08:00
|
|
|
return -ENODEV;
|
2014-02-26 00:25:22 +08:00
|
|
|
}
|
2014-08-20 17:19:38 +08:00
|
|
|
if ((sector_t)disk_capacity != disk_capacity) {
|
|
|
|
mutex_unlock(&devices_mutex);
|
2014-10-21 00:57:00 +08:00
|
|
|
dev_warn(disk_to_dev(dev->gd), "the volume is too big (%d LEBs), cannot resize",
|
|
|
|
vi->size);
|
2014-08-20 17:19:38 +08:00
|
|
|
return -EFBIG;
|
|
|
|
}
|
2014-02-26 00:25:22 +08:00
|
|
|
|
|
|
|
mutex_lock(&dev->dev_mutex);
|
2014-08-30 05:42:29 +08:00
|
|
|
|
|
|
|
if (get_capacity(dev->gd) != disk_capacity) {
|
|
|
|
set_capacity(dev->gd, disk_capacity);
|
2014-10-21 00:57:00 +08:00
|
|
|
dev_info(disk_to_dev(dev->gd), "resized to %lld bytes",
|
|
|
|
vi->used_bytes);
|
2014-08-30 05:42:29 +08:00
|
|
|
}
|
2014-02-26 00:25:22 +08:00
|
|
|
mutex_unlock(&dev->dev_mutex);
|
|
|
|
mutex_unlock(&devices_mutex);
|
2014-05-05 18:11:52 +08:00
|
|
|
return 0;
|
2014-02-26 00:25:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ubiblock_notify(struct notifier_block *nb,
|
|
|
|
unsigned long notification_type, void *ns_ptr)
|
|
|
|
{
|
|
|
|
struct ubi_notification *nt = ns_ptr;
|
|
|
|
|
|
|
|
switch (notification_type) {
|
|
|
|
case UBI_VOLUME_ADDED:
|
|
|
|
/*
|
2014-03-04 18:00:26 +08:00
|
|
|
* We want to enforce explicit block device creation for
|
2014-02-26 00:25:22 +08:00
|
|
|
* volumes, so when a volume is added we do nothing.
|
|
|
|
*/
|
|
|
|
break;
|
|
|
|
case UBI_VOLUME_REMOVED:
|
2014-03-04 18:00:26 +08:00
|
|
|
ubiblock_remove(&nt->vi);
|
2014-02-26 00:25:22 +08:00
|
|
|
break;
|
|
|
|
case UBI_VOLUME_RESIZED:
|
|
|
|
ubiblock_resize(&nt->vi);
|
|
|
|
break;
|
2014-08-30 05:42:29 +08:00
|
|
|
case UBI_VOLUME_UPDATED:
|
|
|
|
/*
|
|
|
|
* If the volume is static, a content update might mean the
|
|
|
|
* size (i.e. used_bytes) was also changed.
|
|
|
|
*/
|
|
|
|
if (nt->vi.vol_type == UBI_STATIC_VOLUME)
|
|
|
|
ubiblock_resize(&nt->vi);
|
|
|
|
break;
|
2014-02-26 00:25:22 +08:00
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct notifier_block ubiblock_notifier = {
|
|
|
|
.notifier_call = ubiblock_notify,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct ubi_volume_desc * __init
|
|
|
|
open_volume_desc(const char *name, int ubi_num, int vol_id)
|
|
|
|
{
|
|
|
|
if (ubi_num == -1)
|
|
|
|
/* No ubi num, name must be a vol device path */
|
|
|
|
return ubi_open_volume_path(name, UBI_READONLY);
|
|
|
|
else if (vol_id == -1)
|
|
|
|
/* No vol_id, must be vol_name */
|
|
|
|
return ubi_open_volume_nm(ubi_num, name, UBI_READONLY);
|
|
|
|
else
|
|
|
|
return ubi_open_volume(ubi_num, vol_id, UBI_READONLY);
|
|
|
|
}
|
|
|
|
|
2014-12-20 03:27:18 +08:00
|
|
|
static void __init ubiblock_create_from_param(void)
|
2014-02-26 00:25:22 +08:00
|
|
|
{
|
2014-12-20 03:27:18 +08:00
|
|
|
int i, ret = 0;
|
2014-02-26 00:25:22 +08:00
|
|
|
struct ubiblock_param *p;
|
|
|
|
struct ubi_volume_desc *desc;
|
|
|
|
struct ubi_volume_info vi;
|
|
|
|
|
2014-12-20 03:27:18 +08:00
|
|
|
/*
|
|
|
|
* If there is an error creating one of the ubiblocks, continue on to
|
|
|
|
* create the following ubiblocks. This helps in a circumstance where
|
|
|
|
* the kernel command-line specifies multiple block devices and some
|
|
|
|
* may be broken, but we still want the working ones to come up.
|
|
|
|
*/
|
2014-02-26 00:25:22 +08:00
|
|
|
for (i = 0; i < ubiblock_devs; i++) {
|
|
|
|
p = &ubiblock_param[i];
|
|
|
|
|
|
|
|
desc = open_volume_desc(p->name, p->ubi_num, p->vol_id);
|
|
|
|
if (IS_ERR(desc)) {
|
2014-12-20 03:27:18 +08:00
|
|
|
pr_err(
|
2017-07-26 17:53:50 +08:00
|
|
|
"UBI: block: can't open volume on ubi%d_%d, err=%ld\n",
|
2014-12-20 03:27:18 +08:00
|
|
|
p->ubi_num, p->vol_id, PTR_ERR(desc));
|
|
|
|
continue;
|
2014-02-26 00:25:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
ubi_get_volume_info(desc, &vi);
|
|
|
|
ubi_close_volume(desc);
|
|
|
|
|
2014-03-04 18:00:26 +08:00
|
|
|
ret = ubiblock_create(&vi);
|
2014-02-26 00:25:22 +08:00
|
|
|
if (ret) {
|
2014-12-20 03:27:18 +08:00
|
|
|
pr_err(
|
2017-07-26 17:53:50 +08:00
|
|
|
"UBI: block: can't add '%s' volume on ubi%d_%d, err=%d\n",
|
2014-12-20 03:27:18 +08:00
|
|
|
vi.name, p->ubi_num, p->vol_id, ret);
|
|
|
|
continue;
|
2014-02-26 00:25:22 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-03-04 18:00:26 +08:00
|
|
|
static void ubiblock_remove_all(void)
|
2014-02-26 00:25:22 +08:00
|
|
|
{
|
|
|
|
struct ubiblock *next;
|
|
|
|
struct ubiblock *dev;
|
|
|
|
|
|
|
|
list_for_each_entry_safe(dev, next, &ubiblock_devices, list) {
|
|
|
|
/* The module is being forcefully removed */
|
|
|
|
WARN_ON(dev->desc);
|
|
|
|
/* Remove from device list */
|
|
|
|
list_del(&dev->list);
|
|
|
|
ubiblock_cleanup(dev);
|
|
|
|
kfree(dev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int __init ubiblock_init(void)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ubiblock_major = register_blkdev(0, "ubiblock");
|
|
|
|
if (ubiblock_major < 0)
|
|
|
|
return ubiblock_major;
|
|
|
|
|
2014-12-20 03:27:18 +08:00
|
|
|
/*
|
|
|
|
* Attach block devices from 'block=' module param.
|
|
|
|
* Even if one block device in the param list fails to come up,
|
|
|
|
* still allow the module to load and leave any others up.
|
|
|
|
*/
|
|
|
|
ubiblock_create_from_param();
|
2014-02-26 00:25:22 +08:00
|
|
|
|
|
|
|
/*
|
2014-03-04 18:00:26 +08:00
|
|
|
* Block devices are only created upon user requests, so we ignore
|
|
|
|
* existing volumes.
|
2014-02-26 00:25:22 +08:00
|
|
|
*/
|
|
|
|
ret = ubi_register_volume_notifier(&ubiblock_notifier, 1);
|
|
|
|
if (ret)
|
|
|
|
goto err_unreg;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_unreg:
|
|
|
|
unregister_blkdev(ubiblock_major, "ubiblock");
|
2014-03-04 18:00:26 +08:00
|
|
|
ubiblock_remove_all();
|
2014-02-26 00:25:22 +08:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
void __exit ubiblock_exit(void)
|
|
|
|
{
|
|
|
|
ubi_unregister_volume_notifier(&ubiblock_notifier);
|
2014-03-04 18:00:26 +08:00
|
|
|
ubiblock_remove_all();
|
2014-02-26 00:25:22 +08:00
|
|
|
unregister_blkdev(ubiblock_major, "ubiblock");
|
|
|
|
}
|