OpenCloudOS-Kernel/drivers/net/ethernet/freescale/enetc/enetc.h

247 lines
6.1 KiB
C
Raw Normal View History

enetc: Introduce basic PF and VF ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 21:29:54 +08:00
/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
/* Copyright 2017-2019 NXP */
#include <linux/timer.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/dma-mapping.h>
#include <linux/skbuff.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/phy.h>
#include "enetc_hw.h"
#define ENETC_MAC_MAXFRM_SIZE 9600
#define ENETC_MAX_MTU (ENETC_MAC_MAXFRM_SIZE - \
(ETH_FCS_LEN + ETH_HLEN + VLAN_HLEN))
struct enetc_tx_swbd {
struct sk_buff *skb;
dma_addr_t dma;
u16 len;
u8 is_dma_page:1;
u8 check_wb:1;
u8 do_tstamp:1;
enetc: Introduce basic PF and VF ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 21:29:54 +08:00
};
#define ENETC_RX_MAXFRM_SIZE ENETC_MAC_MAXFRM_SIZE
#define ENETC_RXB_TRUESIZE 2048 /* PAGE_SIZE >> 1 */
#define ENETC_RXB_PAD NET_SKB_PAD /* add extra space if needed */
#define ENETC_RXB_DMA_SIZE \
(SKB_WITH_OVERHEAD(ENETC_RXB_TRUESIZE) - ENETC_RXB_PAD)
struct enetc_rx_swbd {
dma_addr_t dma;
struct page *page;
u16 page_offset;
};
struct enetc_ring_stats {
unsigned int packets;
unsigned int bytes;
unsigned int rx_alloc_errs;
};
#define ENETC_BDR_DEFAULT_SIZE 1024
#define ENETC_DEFAULT_TX_WORK 256
struct enetc_bdr {
struct device *dev; /* for DMA mapping */
struct net_device *ndev;
void *bd_base; /* points to Rx or Tx BD ring */
union {
void __iomem *tpir;
void __iomem *rcir;
};
u16 index;
int bd_count; /* # of BDs */
int next_to_use;
int next_to_clean;
union {
struct enetc_tx_swbd *tx_swbd;
struct enetc_rx_swbd *rx_swbd;
};
union {
void __iomem *tcir; /* Tx */
int next_to_alloc; /* Rx */
};
void __iomem *idr; /* Interrupt Detect Register pointer */
struct enetc_ring_stats stats;
dma_addr_t bd_dma_base;
} ____cacheline_aligned_in_smp;
static inline void enetc_bdr_idx_inc(struct enetc_bdr *bdr, int *i)
{
if (unlikely(++*i == bdr->bd_count))
*i = 0;
}
static inline int enetc_bd_unused(struct enetc_bdr *bdr)
{
if (bdr->next_to_clean > bdr->next_to_use)
return bdr->next_to_clean - bdr->next_to_use - 1;
return bdr->bd_count + bdr->next_to_clean - bdr->next_to_use - 1;
}
/* Control BD ring */
#define ENETC_CBDR_DEFAULT_SIZE 64
struct enetc_cbdr {
void *bd_base; /* points to Rx or Tx BD ring */
void __iomem *pir;
void __iomem *cir;
int bd_count; /* # of BDs */
int next_to_use;
int next_to_clean;
dma_addr_t bd_dma_base;
};
#define ENETC_TXBD(BDR, i) (&(((union enetc_tx_bd *)((BDR).bd_base))[i]))
#define ENETC_RXBD(BDR, i) (&(((union enetc_rx_bd *)((BDR).bd_base))[i]))
struct enetc_msg_swbd {
void *vaddr;
dma_addr_t dma;
int size;
};
enetc: Introduce basic PF and VF ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 21:29:54 +08:00
#define ENETC_REV1 0x1
enum enetc_errata {
ENETC_ERR_TXCSUM = BIT(0),
ENETC_ERR_VLAN_ISOL = BIT(1),
ENETC_ERR_UCMCSWP = BIT(2),
};
/* PCI IEP device data */
struct enetc_si {
struct pci_dev *pdev;
struct enetc_hw hw;
enum enetc_errata errata;
struct net_device *ndev; /* back ref. */
struct enetc_cbdr cbd_ring;
int num_rx_rings; /* how many rings are available in the SI */
int num_tx_rings;
int num_fs_entries;
int num_rss; /* number of RSS buckets */
enetc: Introduce basic PF and VF ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 21:29:54 +08:00
unsigned short pad;
};
#define ENETC_SI_ALIGN 32
static inline void *enetc_si_priv(const struct enetc_si *si)
{
return (char *)si + ALIGN(sizeof(struct enetc_si), ENETC_SI_ALIGN);
}
static inline bool enetc_si_is_pf(struct enetc_si *si)
{
return !!(si->hw.port);
}
#define ENETC_MAX_NUM_TXQS 8
#define ENETC_INT_NAME_MAX (IFNAMSIZ + 8)
struct enetc_int_vector {
void __iomem *rbier;
void __iomem *tbier_base;
unsigned long tx_rings_map;
int count_tx_rings;
struct napi_struct napi;
char name[ENETC_INT_NAME_MAX];
struct enetc_bdr rx_ring ____cacheline_aligned_in_smp;
struct enetc_bdr tx_ring[0];
};
struct enetc_cls_rule {
struct ethtool_rx_flow_spec fs;
int used;
};
enetc: Introduce basic PF and VF ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 21:29:54 +08:00
#define ENETC_MAX_BDR_INT 2 /* fixed to max # of available cpus */
/* TODO: more hardware offloads */
enum enetc_active_offloads {
ENETC_F_RX_TSTAMP = BIT(0),
ENETC_F_TX_TSTAMP = BIT(1),
};
enetc: Introduce basic PF and VF ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 21:29:54 +08:00
struct enetc_ndev_priv {
struct net_device *ndev;
struct device *dev; /* dma-mapping device */
struct enetc_si *si;
int bdr_int_num; /* number of Rx/Tx ring interrupts */
struct enetc_int_vector *int_vector[ENETC_MAX_BDR_INT];
u16 num_rx_rings, num_tx_rings;
u16 rx_bd_count, tx_bd_count;
u16 msg_enable;
int active_offloads;
enetc: Introduce basic PF and VF ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 21:29:54 +08:00
struct enetc_bdr *tx_ring[16];
struct enetc_bdr *rx_ring[16];
struct enetc_cls_rule *cls_rules;
enetc: Introduce basic PF and VF ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 21:29:54 +08:00
struct device_node *phy_node;
phy_interface_t if_mode;
};
/* Messaging */
/* VF-PF set primary MAC address message format */
struct enetc_msg_cmd_set_primary_mac {
struct enetc_msg_cmd_header header;
struct sockaddr mac;
};
enetc: Introduce basic PF and VF ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 21:29:54 +08:00
#define ENETC_CBD(R, i) (&(((struct enetc_cbd *)((R).bd_base))[i]))
#define ENETC_CBDR_TIMEOUT 1000 /* usecs */
/* PTP driver exports */
extern int enetc_phc_index;
enetc: Introduce basic PF and VF ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 21:29:54 +08:00
/* SI common */
int enetc_pci_probe(struct pci_dev *pdev, const char *name, int sizeof_priv);
void enetc_pci_remove(struct pci_dev *pdev);
int enetc_alloc_msix(struct enetc_ndev_priv *priv);
void enetc_free_msix(struct enetc_ndev_priv *priv);
void enetc_get_si_caps(struct enetc_si *si);
void enetc_init_si_rings_params(struct enetc_ndev_priv *priv);
int enetc_alloc_si_resources(struct enetc_ndev_priv *priv);
void enetc_free_si_resources(struct enetc_ndev_priv *priv);
int enetc_open(struct net_device *ndev);
int enetc_close(struct net_device *ndev);
netdev_tx_t enetc_xmit(struct sk_buff *skb, struct net_device *ndev);
struct net_device_stats *enetc_get_stats(struct net_device *ndev);
int enetc_set_features(struct net_device *ndev,
netdev_features_t features);
int enetc_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd);
int enetc_setup_tc(struct net_device *ndev, enum tc_setup_type type,
void *type_data);
enetc: Introduce basic PF and VF ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22 21:29:54 +08:00
/* ethtool */
void enetc_set_ethtool_ops(struct net_device *ndev);
/* control buffer descriptor ring (CBDR) */
int enetc_set_mac_flt_entry(struct enetc_si *si, int index,
char *mac_addr, int si_map);
int enetc_clear_mac_flt_entry(struct enetc_si *si, int index);
int enetc_set_fs_entry(struct enetc_si *si, struct enetc_cmd_rfse *rfse,
int index);
void enetc_set_rss_key(struct enetc_hw *hw, const u8 *bytes);
int enetc_get_rss_table(struct enetc_si *si, u32 *table, int count);
int enetc_set_rss_table(struct enetc_si *si, const u32 *table, int count);