790 lines
21 KiB
C
790 lines
21 KiB
C
|
/*
|
||
|
* tps80031-regulator.c -- TI TPS80031 regulator driver.
|
||
|
*
|
||
|
* Regulator driver for TITPS80031/TPS80032 Fully Integrated Power
|
||
|
* Management with Power Path and Battery Charger.
|
||
|
*
|
||
|
* Copyright (c) 2012, NVIDIA Corporation.
|
||
|
*
|
||
|
* Author: Laxman Dewangan <ldewangan@nvidia.com>
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation version 2.
|
||
|
*
|
||
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
|
||
|
* whether express or implied; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||
|
* General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the Free Software
|
||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
|
||
|
* 02111-1307, USA
|
||
|
*/
|
||
|
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/mfd/tps80031.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/regulator/driver.h>
|
||
|
#include <linux/regulator/machine.h>
|
||
|
#include <linux/slab.h>
|
||
|
|
||
|
/* Flags for DCDC Voltage reading */
|
||
|
#define DCDC_OFFSET_EN BIT(0)
|
||
|
#define DCDC_EXTENDED_EN BIT(1)
|
||
|
#define TRACK_MODE_ENABLE BIT(2)
|
||
|
|
||
|
#define SMPS_MULTOFFSET_VIO BIT(1)
|
||
|
#define SMPS_MULTOFFSET_SMPS1 BIT(3)
|
||
|
#define SMPS_MULTOFFSET_SMPS2 BIT(4)
|
||
|
#define SMPS_MULTOFFSET_SMPS3 BIT(6)
|
||
|
#define SMPS_MULTOFFSET_SMPS4 BIT(0)
|
||
|
|
||
|
#define SMPS_CMD_MASK 0xC0
|
||
|
#define SMPS_VSEL_MASK 0x3F
|
||
|
#define LDO_VSEL_MASK 0x1F
|
||
|
#define LDO_TRACK_VSEL_MASK 0x3F
|
||
|
|
||
|
#define MISC2_LDOUSB_IN_VSYS BIT(4)
|
||
|
#define MISC2_LDOUSB_IN_PMID BIT(3)
|
||
|
#define MISC2_LDOUSB_IN_MASK 0x18
|
||
|
|
||
|
#define MISC2_LDO3_SEL_VIB_VAL BIT(0)
|
||
|
#define MISC2_LDO3_SEL_VIB_MASK 0x1
|
||
|
|
||
|
#define BOOST_HW_PWR_EN BIT(5)
|
||
|
#define BOOST_HW_PWR_EN_MASK BIT(5)
|
||
|
|
||
|
#define OPA_MODE_EN BIT(6)
|
||
|
#define OPA_MODE_EN_MASK BIT(6)
|
||
|
|
||
|
#define USB_VBUS_CTRL_SET 0x04
|
||
|
#define USB_VBUS_CTRL_CLR 0x05
|
||
|
#define VBUS_DISCHRG 0x20
|
||
|
|
||
|
struct tps80031_regulator_info {
|
||
|
/* Regulator register address.*/
|
||
|
u8 trans_reg;
|
||
|
u8 state_reg;
|
||
|
u8 force_reg;
|
||
|
u8 volt_reg;
|
||
|
u8 volt_id;
|
||
|
|
||
|
/*Power request bits */
|
||
|
int preq_bit;
|
||
|
|
||
|
/* used by regulator core */
|
||
|
struct regulator_desc desc;
|
||
|
|
||
|
};
|
||
|
|
||
|
struct tps80031_regulator {
|
||
|
struct device *dev;
|
||
|
struct regulator_dev *rdev;
|
||
|
struct tps80031_regulator_info *rinfo;
|
||
|
|
||
|
u8 device_flags;
|
||
|
unsigned int config_flags;
|
||
|
unsigned int ext_ctrl_flag;
|
||
|
};
|
||
|
|
||
|
static inline struct device *to_tps80031_dev(struct regulator_dev *rdev)
|
||
|
{
|
||
|
return rdev_get_dev(rdev)->parent->parent;
|
||
|
}
|
||
|
|
||
|
static int tps80031_reg_is_enabled(struct regulator_dev *rdev)
|
||
|
{
|
||
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
||
|
struct device *parent = to_tps80031_dev(rdev);
|
||
|
u8 reg_val;
|
||
|
int ret;
|
||
|
|
||
|
if (ri->ext_ctrl_flag & EXT_PWR_REQ)
|
||
|
return true;
|
||
|
|
||
|
ret = tps80031_read(parent, SLAVE_ID1, ri->rinfo->state_reg, ®_val);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&rdev->dev, "Reg 0x%02x read failed, err = %d\n",
|
||
|
ri->rinfo->state_reg, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
return ((reg_val & STATE_MASK) == STATE_ON);
|
||
|
}
|
||
|
|
||
|
static int tps80031_reg_enable(struct regulator_dev *rdev)
|
||
|
{
|
||
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
||
|
struct device *parent = to_tps80031_dev(rdev);
|
||
|
int ret;
|
||
|
|
||
|
if (ri->ext_ctrl_flag & EXT_PWR_REQ)
|
||
|
return 0;
|
||
|
|
||
|
ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->state_reg,
|
||
|
STATE_ON, STATE_MASK);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n",
|
||
|
ri->rinfo->state_reg, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int tps80031_reg_disable(struct regulator_dev *rdev)
|
||
|
{
|
||
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
||
|
struct device *parent = to_tps80031_dev(rdev);
|
||
|
int ret;
|
||
|
|
||
|
if (ri->ext_ctrl_flag & EXT_PWR_REQ)
|
||
|
return 0;
|
||
|
|
||
|
ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->state_reg,
|
||
|
STATE_OFF, STATE_MASK);
|
||
|
if (ret < 0)
|
||
|
dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n",
|
||
|
ri->rinfo->state_reg, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* DCDC voltages for the selector of 58 to 63 */
|
||
|
static int tps80031_dcdc_voltages[4][5] = {
|
||
|
{ 1350, 1500, 1800, 1900, 2100},
|
||
|
{ 1350, 1500, 1800, 1900, 2100},
|
||
|
{ 2084, 2315, 2778, 2932, 3241},
|
||
|
{ 4167, 2315, 2778, 2932, 3241},
|
||
|
};
|
||
|
|
||
|
static int tps80031_dcdc_list_voltage(struct regulator_dev *rdev, unsigned sel)
|
||
|
{
|
||
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
||
|
int volt_index = ri->device_flags & 0x3;
|
||
|
|
||
|
if (sel == 0)
|
||
|
return 0;
|
||
|
else if (sel < 58)
|
||
|
return regulator_list_voltage_linear(rdev, sel - 1);
|
||
|
else
|
||
|
return tps80031_dcdc_voltages[volt_index][sel - 58] * 1000;
|
||
|
}
|
||
|
|
||
|
static int tps80031_dcdc_set_voltage_sel(struct regulator_dev *rdev,
|
||
|
unsigned vsel)
|
||
|
{
|
||
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
||
|
struct device *parent = to_tps80031_dev(rdev);
|
||
|
int ret;
|
||
|
u8 reg_val;
|
||
|
|
||
|
if (ri->rinfo->force_reg) {
|
||
|
ret = tps80031_read(parent, ri->rinfo->volt_id,
|
||
|
ri->rinfo->force_reg, ®_val);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
||
|
ri->rinfo->force_reg, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
if (!(reg_val & SMPS_CMD_MASK)) {
|
||
|
ret = tps80031_update(parent, ri->rinfo->volt_id,
|
||
|
ri->rinfo->force_reg, vsel, SMPS_VSEL_MASK);
|
||
|
if (ret < 0)
|
||
|
dev_err(ri->dev,
|
||
|
"reg 0x%02x update failed, e = %d\n",
|
||
|
ri->rinfo->force_reg, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
ret = tps80031_update(parent, ri->rinfo->volt_id,
|
||
|
ri->rinfo->volt_reg, vsel, SMPS_VSEL_MASK);
|
||
|
if (ret < 0)
|
||
|
dev_err(ri->dev, "reg 0x%02x update failed, e = %d\n",
|
||
|
ri->rinfo->volt_reg, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int tps80031_dcdc_get_voltage_sel(struct regulator_dev *rdev)
|
||
|
{
|
||
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
||
|
struct device *parent = to_tps80031_dev(rdev);
|
||
|
uint8_t vsel = 0;
|
||
|
int ret;
|
||
|
|
||
|
if (ri->rinfo->force_reg) {
|
||
|
ret = tps80031_read(parent, ri->rinfo->volt_id,
|
||
|
ri->rinfo->force_reg, &vsel);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
||
|
ri->rinfo->force_reg, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
if (!(vsel & SMPS_CMD_MASK))
|
||
|
return vsel & SMPS_VSEL_MASK;
|
||
|
}
|
||
|
ret = tps80031_read(parent, ri->rinfo->volt_id,
|
||
|
ri->rinfo->volt_reg, &vsel);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
||
|
ri->rinfo->volt_reg, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
return vsel & SMPS_VSEL_MASK;
|
||
|
}
|
||
|
|
||
|
static int tps80031_ldo_set_voltage_sel(struct regulator_dev *rdev,
|
||
|
unsigned sel)
|
||
|
{
|
||
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
||
|
struct device *parent = to_tps80031_dev(rdev);
|
||
|
int ret;
|
||
|
|
||
|
/* Check for valid setting for TPS80031 or TPS80032-ES1.0 */
|
||
|
if ((ri->rinfo->desc.id == TPS80031_REGULATOR_LDO2) &&
|
||
|
(ri->device_flags & TRACK_MODE_ENABLE)) {
|
||
|
unsigned nvsel = (sel) & 0x1F;
|
||
|
if (((tps80031_get_chip_info(parent) == TPS80031) ||
|
||
|
((tps80031_get_chip_info(parent) == TPS80032) &&
|
||
|
(tps80031_get_pmu_version(parent) == 0x0))) &&
|
||
|
((nvsel == 0x0) || (nvsel >= 0x19 && nvsel <= 0x1F))) {
|
||
|
dev_err(ri->dev,
|
||
|
"Invalid sel %d in track mode LDO2\n",
|
||
|
nvsel);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
ret = tps80031_write(parent, ri->rinfo->volt_id,
|
||
|
ri->rinfo->volt_reg, sel);
|
||
|
if (ret < 0)
|
||
|
dev_err(ri->dev, "Error in writing reg 0x%02x, e = %d\n",
|
||
|
ri->rinfo->volt_reg, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int tps80031_ldo_get_voltage_sel(struct regulator_dev *rdev)
|
||
|
{
|
||
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
||
|
struct device *parent = to_tps80031_dev(rdev);
|
||
|
uint8_t vsel;
|
||
|
int ret;
|
||
|
|
||
|
ret = tps80031_read(parent, ri->rinfo->volt_id,
|
||
|
ri->rinfo->volt_reg, &vsel);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "Error in writing the Voltage register\n");
|
||
|
return ret;
|
||
|
}
|
||
|
return vsel & rdev->desc->vsel_mask;
|
||
|
}
|
||
|
|
||
|
static int tps80031_ldo_list_voltage(struct regulator_dev *rdev, unsigned sel)
|
||
|
{
|
||
|
if (sel == 0)
|
||
|
return 0;
|
||
|
else
|
||
|
return regulator_list_voltage_linear(rdev, sel - 1);
|
||
|
}
|
||
|
|
||
|
static int tps80031_vbus_is_enabled(struct regulator_dev *rdev)
|
||
|
{
|
||
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
||
|
struct device *parent = to_tps80031_dev(rdev);
|
||
|
int ret = -EIO;
|
||
|
uint8_t ctrl1 = 0;
|
||
|
uint8_t ctrl3 = 0;
|
||
|
|
||
|
ret = tps80031_read(parent, SLAVE_ID2,
|
||
|
TPS80031_CHARGERUSB_CTRL1, &ctrl1);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
||
|
TPS80031_CHARGERUSB_CTRL1, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
ret = tps80031_read(parent, SLAVE_ID2,
|
||
|
TPS80031_CHARGERUSB_CTRL3, &ctrl3);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
||
|
TPS80031_CHARGERUSB_CTRL1, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
if ((ctrl1 & OPA_MODE_EN) && (ctrl3 & BOOST_HW_PWR_EN))
|
||
|
return 1;
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int tps80031_vbus_enable(struct regulator_dev *rdev)
|
||
|
{
|
||
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
||
|
struct device *parent = to_tps80031_dev(rdev);
|
||
|
int ret;
|
||
|
|
||
|
ret = tps80031_set_bits(parent, SLAVE_ID2,
|
||
|
TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
||
|
TPS80031_CHARGERUSB_CTRL1, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = tps80031_set_bits(parent, SLAVE_ID2,
|
||
|
TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
||
|
TPS80031_CHARGERUSB_CTRL3, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int tps80031_vbus_disable(struct regulator_dev *rdev)
|
||
|
{
|
||
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
||
|
struct device *parent = to_tps80031_dev(rdev);
|
||
|
int ret = 0;
|
||
|
|
||
|
if (ri->config_flags & VBUS_DISCHRG_EN_PDN) {
|
||
|
ret = tps80031_write(parent, SLAVE_ID2,
|
||
|
USB_VBUS_CTRL_SET, VBUS_DISCHRG);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n",
|
||
|
USB_VBUS_CTRL_SET, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
ret = tps80031_clr_bits(parent, SLAVE_ID2,
|
||
|
TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n",
|
||
|
TPS80031_CHARGERUSB_CTRL1, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = tps80031_clr_bits(parent, SLAVE_ID2,
|
||
|
TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n",
|
||
|
TPS80031_CHARGERUSB_CTRL3, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
mdelay(DIV_ROUND_UP(ri->rinfo->desc.enable_time, 1000));
|
||
|
if (ri->config_flags & VBUS_DISCHRG_EN_PDN) {
|
||
|
ret = tps80031_write(parent, SLAVE_ID2,
|
||
|
USB_VBUS_CTRL_CLR, VBUS_DISCHRG);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n",
|
||
|
USB_VBUS_CTRL_CLR, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static struct regulator_ops tps80031_dcdc_ops = {
|
||
|
.list_voltage = tps80031_dcdc_list_voltage,
|
||
|
.set_voltage_sel = tps80031_dcdc_set_voltage_sel,
|
||
|
.get_voltage_sel = tps80031_dcdc_get_voltage_sel,
|
||
|
.enable = tps80031_reg_enable,
|
||
|
.disable = tps80031_reg_disable,
|
||
|
.is_enabled = tps80031_reg_is_enabled,
|
||
|
};
|
||
|
|
||
|
static struct regulator_ops tps80031_ldo_ops = {
|
||
|
.list_voltage = tps80031_ldo_list_voltage,
|
||
|
.set_voltage_sel = tps80031_ldo_set_voltage_sel,
|
||
|
.get_voltage_sel = tps80031_ldo_get_voltage_sel,
|
||
|
.enable = tps80031_reg_enable,
|
||
|
.disable = tps80031_reg_disable,
|
||
|
.is_enabled = tps80031_reg_is_enabled,
|
||
|
};
|
||
|
|
||
|
static struct regulator_ops tps80031_vbus_sw_ops = {
|
||
|
.enable = tps80031_vbus_enable,
|
||
|
.disable = tps80031_vbus_disable,
|
||
|
.is_enabled = tps80031_vbus_is_enabled,
|
||
|
};
|
||
|
|
||
|
static struct regulator_ops tps80031_vbus_hw_ops = {
|
||
|
};
|
||
|
|
||
|
static struct regulator_ops tps80031_ext_reg_ops = {
|
||
|
.enable = tps80031_reg_enable,
|
||
|
.disable = tps80031_reg_disable,
|
||
|
.is_enabled = tps80031_reg_is_enabled,
|
||
|
};
|
||
|
|
||
|
/* Non-exiting default definition for some register */
|
||
|
#define TPS80031_SMPS3_CFG_FORCE 0
|
||
|
#define TPS80031_SMPS4_CFG_FORCE 0
|
||
|
|
||
|
#define TPS80031_VBUS_CFG_TRANS 0
|
||
|
#define TPS80031_VBUS_CFG_STATE 0
|
||
|
|
||
|
#define TPS80031_REG_SMPS(_id, _volt_id, _pbit) \
|
||
|
{ \
|
||
|
.trans_reg = TPS80031_##_id##_CFG_TRANS, \
|
||
|
.state_reg = TPS80031_##_id##_CFG_STATE, \
|
||
|
.force_reg = TPS80031_##_id##_CFG_FORCE, \
|
||
|
.volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \
|
||
|
.volt_id = SLAVE_##_volt_id, \
|
||
|
.preq_bit = _pbit, \
|
||
|
.desc = { \
|
||
|
.name = "tps80031_"#_id, \
|
||
|
.id = TPS80031_REGULATOR_##_id, \
|
||
|
.n_voltages = 63, \
|
||
|
.ops = &tps80031_dcdc_ops, \
|
||
|
.type = REGULATOR_VOLTAGE, \
|
||
|
.owner = THIS_MODULE, \
|
||
|
.enable_time = 500, \
|
||
|
}, \
|
||
|
}
|
||
|
|
||
|
#define TPS80031_REG_LDO(_id, _preq_bit) \
|
||
|
{ \
|
||
|
.trans_reg = TPS80031_##_id##_CFG_TRANS, \
|
||
|
.state_reg = TPS80031_##_id##_CFG_STATE, \
|
||
|
.volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \
|
||
|
.volt_id = SLAVE_ID1, \
|
||
|
.preq_bit = _preq_bit, \
|
||
|
.desc = { \
|
||
|
.owner = THIS_MODULE, \
|
||
|
.name = "tps80031_"#_id, \
|
||
|
.id = TPS80031_REGULATOR_##_id, \
|
||
|
.ops = &tps80031_ldo_ops, \
|
||
|
.type = REGULATOR_VOLTAGE, \
|
||
|
.min_uV = 1000000, \
|
||
|
.uV_step = 100000, \
|
||
|
.n_voltages = 25, \
|
||
|
.vsel_mask = LDO_VSEL_MASK, \
|
||
|
.enable_time = 500, \
|
||
|
}, \
|
||
|
}
|
||
|
|
||
|
#define TPS80031_REG_FIXED(_id, max_mV, _ops, _delay, _pbit) \
|
||
|
{ \
|
||
|
.trans_reg = TPS80031_##_id##_CFG_TRANS, \
|
||
|
.state_reg = TPS80031_##_id##_CFG_STATE, \
|
||
|
.volt_id = SLAVE_ID1, \
|
||
|
.preq_bit = _pbit, \
|
||
|
.desc = { \
|
||
|
.name = "tps80031_"#_id, \
|
||
|
.id = TPS80031_REGULATOR_##_id, \
|
||
|
.n_voltages = 2, \
|
||
|
.ops = &_ops, \
|
||
|
.type = REGULATOR_VOLTAGE, \
|
||
|
.owner = THIS_MODULE, \
|
||
|
.enable_time = _delay, \
|
||
|
}, \
|
||
|
}
|
||
|
|
||
|
static struct tps80031_regulator_info tps80031_rinfo[TPS80031_REGULATOR_MAX] = {
|
||
|
TPS80031_REG_SMPS(VIO, ID0, 4),
|
||
|
TPS80031_REG_SMPS(SMPS1, ID0, 0),
|
||
|
TPS80031_REG_SMPS(SMPS2, ID0, 1),
|
||
|
TPS80031_REG_SMPS(SMPS3, ID1, 2),
|
||
|
TPS80031_REG_SMPS(SMPS4, ID1, 3),
|
||
|
TPS80031_REG_LDO(VANA, -1),
|
||
|
TPS80031_REG_LDO(LDO1, 8),
|
||
|
TPS80031_REG_LDO(LDO2, 9),
|
||
|
TPS80031_REG_LDO(LDO3, 10),
|
||
|
TPS80031_REG_LDO(LDO4, 11),
|
||
|
TPS80031_REG_LDO(LDO5, 12),
|
||
|
TPS80031_REG_LDO(LDO6, 13),
|
||
|
TPS80031_REG_LDO(LDO7, 14),
|
||
|
TPS80031_REG_LDO(LDOLN, 15),
|
||
|
TPS80031_REG_LDO(LDOUSB, 5),
|
||
|
TPS80031_REG_FIXED(VBUS, 5000, tps80031_vbus_hw_ops, 100000, -1),
|
||
|
TPS80031_REG_FIXED(REGEN1, 3300, tps80031_ext_reg_ops, 0, 16),
|
||
|
TPS80031_REG_FIXED(REGEN2, 3300, tps80031_ext_reg_ops, 0, 17),
|
||
|
TPS80031_REG_FIXED(SYSEN, 3300, tps80031_ext_reg_ops, 0, 18),
|
||
|
};
|
||
|
|
||
|
static int tps80031_power_req_config(struct device *parent,
|
||
|
struct tps80031_regulator *ri,
|
||
|
struct tps80031_regulator_platform_data *tps80031_pdata)
|
||
|
{
|
||
|
int ret = 0;
|
||
|
|
||
|
if (ri->rinfo->preq_bit < 0)
|
||
|
goto skip_pwr_req_config;
|
||
|
|
||
|
ret = tps80031_ext_power_req_config(parent, ri->ext_ctrl_flag,
|
||
|
ri->rinfo->preq_bit, ri->rinfo->state_reg,
|
||
|
ri->rinfo->trans_reg);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "ext powerreq config failed, err = %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
skip_pwr_req_config:
|
||
|
if (tps80031_pdata->ext_ctrl_flag & PWR_ON_ON_SLEEP) {
|
||
|
ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->trans_reg,
|
||
|
TRANS_SLEEP_ON, TRANS_SLEEP_MASK);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "Reg 0x%02x update failed, e %d\n",
|
||
|
ri->rinfo->trans_reg, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int tps80031_regulator_config(struct device *parent,
|
||
|
struct tps80031_regulator *ri,
|
||
|
struct tps80031_regulator_platform_data *tps80031_pdata)
|
||
|
{
|
||
|
int ret = 0;
|
||
|
|
||
|
switch (ri->rinfo->desc.id) {
|
||
|
case TPS80031_REGULATOR_LDOUSB:
|
||
|
if (ri->config_flags &
|
||
|
(USBLDO_INPUT_VSYS | USBLDO_INPUT_PMID)) {
|
||
|
unsigned val = 0;
|
||
|
if (ri->config_flags & USBLDO_INPUT_VSYS)
|
||
|
val = MISC2_LDOUSB_IN_VSYS;
|
||
|
else
|
||
|
val = MISC2_LDOUSB_IN_PMID;
|
||
|
|
||
|
ret = tps80031_update(parent, SLAVE_ID1,
|
||
|
TPS80031_MISC2, val, MISC2_LDOUSB_IN_MASK);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev,
|
||
|
"LDOUSB config failed, e= %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
break;
|
||
|
|
||
|
case TPS80031_REGULATOR_LDO3:
|
||
|
if (ri->config_flags & LDO3_OUTPUT_VIB) {
|
||
|
ret = tps80031_update(parent, SLAVE_ID1,
|
||
|
TPS80031_MISC2, MISC2_LDO3_SEL_VIB_VAL,
|
||
|
MISC2_LDO3_SEL_VIB_MASK);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev,
|
||
|
"LDO3 config failed, e = %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
break;
|
||
|
|
||
|
case TPS80031_REGULATOR_VBUS:
|
||
|
/* Provide SW control Ops if VBUS is SW control */
|
||
|
if (!(ri->config_flags & VBUS_SW_ONLY))
|
||
|
ri->rinfo->desc.ops = &tps80031_vbus_sw_ops;
|
||
|
break;
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* Configure Active state to ON, SLEEP to OFF and OFF_state to OFF */
|
||
|
ret = tps80031_update(parent, SLAVE_ID1, ri->rinfo->trans_reg,
|
||
|
TRANS_ACTIVE_ON | TRANS_SLEEP_OFF | TRANS_OFF_OFF,
|
||
|
TRANS_ACTIVE_MASK | TRANS_SLEEP_MASK | TRANS_OFF_MASK);
|
||
|
if (ret < 0) {
|
||
|
dev_err(ri->dev, "trans reg update failed, e %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int check_smps_mode_mult(struct device *parent,
|
||
|
struct tps80031_regulator *ri)
|
||
|
{
|
||
|
int mult_offset;
|
||
|
int ret;
|
||
|
u8 smps_offset;
|
||
|
u8 smps_mult;
|
||
|
|
||
|
ret = tps80031_read(parent, SLAVE_ID1,
|
||
|
TPS80031_SMPS_OFFSET, &smps_offset);
|
||
|
if (ret < 0) {
|
||
|
dev_err(parent, "Error in reading smps offset register\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = tps80031_read(parent, SLAVE_ID1,
|
||
|
TPS80031_SMPS_MULT, &smps_mult);
|
||
|
if (ret < 0) {
|
||
|
dev_err(parent, "Error in reading smps mult register\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
switch (ri->rinfo->desc.id) {
|
||
|
case TPS80031_REGULATOR_VIO:
|
||
|
mult_offset = SMPS_MULTOFFSET_VIO;
|
||
|
break;
|
||
|
case TPS80031_REGULATOR_SMPS1:
|
||
|
mult_offset = SMPS_MULTOFFSET_SMPS1;
|
||
|
break;
|
||
|
case TPS80031_REGULATOR_SMPS2:
|
||
|
mult_offset = SMPS_MULTOFFSET_SMPS2;
|
||
|
break;
|
||
|
case TPS80031_REGULATOR_SMPS3:
|
||
|
mult_offset = SMPS_MULTOFFSET_SMPS3;
|
||
|
break;
|
||
|
case TPS80031_REGULATOR_SMPS4:
|
||
|
mult_offset = SMPS_MULTOFFSET_SMPS4;
|
||
|
break;
|
||
|
case TPS80031_REGULATOR_LDO2:
|
||
|
ri->device_flags = smps_mult & BIT(5) ? TRACK_MODE_ENABLE : 0;
|
||
|
/* TRACK mode the ldo2 varies from 600mV to 1300mV */
|
||
|
if (ri->device_flags & TRACK_MODE_ENABLE) {
|
||
|
ri->rinfo->desc.min_uV = 600000;
|
||
|
ri->rinfo->desc.uV_step = 12500;
|
||
|
ri->rinfo->desc.n_voltages = 57;
|
||
|
ri->rinfo->desc.vsel_mask = LDO_TRACK_VSEL_MASK;
|
||
|
}
|
||
|
return 0;
|
||
|
default:
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
ri->device_flags = (smps_offset & mult_offset) ? DCDC_OFFSET_EN : 0;
|
||
|
ri->device_flags |= (smps_mult & mult_offset) ? DCDC_EXTENDED_EN : 0;
|
||
|
switch (ri->device_flags) {
|
||
|
case 0:
|
||
|
ri->rinfo->desc.min_uV = 607700;
|
||
|
ri->rinfo->desc.uV_step = 12660;
|
||
|
break;
|
||
|
case DCDC_OFFSET_EN:
|
||
|
ri->rinfo->desc.min_uV = 700000;
|
||
|
ri->rinfo->desc.uV_step = 12500;
|
||
|
break;
|
||
|
case DCDC_EXTENDED_EN:
|
||
|
ri->rinfo->desc.min_uV = 1852000;
|
||
|
ri->rinfo->desc.uV_step = 38600;
|
||
|
break;
|
||
|
case DCDC_OFFSET_EN | DCDC_EXTENDED_EN:
|
||
|
ri->rinfo->desc.min_uV = 2161000;
|
||
|
ri->rinfo->desc.uV_step = 38600;
|
||
|
break;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int __devinit tps80031_regulator_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct tps80031_platform_data *pdata;
|
||
|
struct tps80031_regulator_platform_data *tps_pdata;
|
||
|
struct tps80031_regulator_info *rinfo;
|
||
|
struct tps80031_regulator *ri;
|
||
|
struct tps80031_regulator *pmic;
|
||
|
struct regulator_dev *rdev;
|
||
|
struct regulator_config config = { };
|
||
|
int ret;
|
||
|
int num;
|
||
|
|
||
|
pdata = dev_get_platdata(pdev->dev.parent);
|
||
|
|
||
|
if (!pdata) {
|
||
|
dev_err(&pdev->dev, "No platform data\n");
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
pmic = devm_kzalloc(&pdev->dev,
|
||
|
TPS80031_REGULATOR_MAX * sizeof(*pmic), GFP_KERNEL);
|
||
|
if (!pmic) {
|
||
|
dev_err(&pdev->dev, "mem alloc for pmic failed\n");
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
for (num = 0; num < TPS80031_REGULATOR_MAX; ++num) {
|
||
|
tps_pdata = pdata->regulator_pdata[num];
|
||
|
rinfo = &tps80031_rinfo[num];
|
||
|
ri = &pmic[num];
|
||
|
ri->rinfo = rinfo;
|
||
|
ri->dev = &pdev->dev;
|
||
|
|
||
|
check_smps_mode_mult(pdev->dev.parent, ri);
|
||
|
config.dev = &pdev->dev;
|
||
|
config.init_data = NULL;
|
||
|
config.driver_data = ri;
|
||
|
if (tps_pdata) {
|
||
|
config.init_data = tps_pdata->reg_init_data;
|
||
|
ri->config_flags = tps_pdata->config_flags;
|
||
|
ri->ext_ctrl_flag = tps_pdata->ext_ctrl_flag;
|
||
|
ret = tps80031_regulator_config(pdev->dev.parent,
|
||
|
ri, tps_pdata);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&pdev->dev,
|
||
|
"regulator config failed, e %d\n", ret);
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
ret = tps80031_power_req_config(pdev->dev.parent,
|
||
|
ri, tps_pdata);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&pdev->dev,
|
||
|
"pwr_req config failed, err %d\n", ret);
|
||
|
goto fail;
|
||
|
}
|
||
|
}
|
||
|
rdev = regulator_register(&ri->rinfo->desc, &config);
|
||
|
if (IS_ERR_OR_NULL(rdev)) {
|
||
|
dev_err(&pdev->dev,
|
||
|
"register regulator failed %s\n",
|
||
|
ri->rinfo->desc.name);
|
||
|
ret = PTR_ERR(rdev);
|
||
|
goto fail;
|
||
|
}
|
||
|
ri->rdev = rdev;
|
||
|
}
|
||
|
|
||
|
platform_set_drvdata(pdev, pmic);
|
||
|
return 0;
|
||
|
fail:
|
||
|
while (--num >= 0) {
|
||
|
ri = &pmic[num];
|
||
|
regulator_unregister(ri->rdev);
|
||
|
}
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int __devexit tps80031_regulator_remove(struct platform_device *pdev)
|
||
|
{
|
||
|
struct tps80031_regulator *pmic = platform_get_drvdata(pdev);
|
||
|
struct tps80031_regulator *ri = NULL;
|
||
|
int num;
|
||
|
|
||
|
for (num = 0; num < TPS80031_REGULATOR_MAX; ++num) {
|
||
|
ri = &pmic[num];
|
||
|
regulator_unregister(ri->rdev);
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static struct platform_driver tps80031_regulator_driver = {
|
||
|
.driver = {
|
||
|
.name = "tps80031-pmic",
|
||
|
.owner = THIS_MODULE,
|
||
|
},
|
||
|
.probe = tps80031_regulator_probe,
|
||
|
.remove = __devexit_p(tps80031_regulator_remove),
|
||
|
};
|
||
|
|
||
|
static int __init tps80031_regulator_init(void)
|
||
|
{
|
||
|
return platform_driver_register(&tps80031_regulator_driver);
|
||
|
}
|
||
|
subsys_initcall(tps80031_regulator_init);
|
||
|
|
||
|
static void __exit tps80031_regulator_exit(void)
|
||
|
{
|
||
|
platform_driver_unregister(&tps80031_regulator_driver);
|
||
|
}
|
||
|
module_exit(tps80031_regulator_exit);
|
||
|
|
||
|
MODULE_ALIAS("platform:tps80031-regulator");
|
||
|
MODULE_DESCRIPTION("Regulator Driver for TI TPS80031 PMIC");
|
||
|
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
|
||
|
MODULE_LICENSE("GPL v2");
|