OpenCloudOS-Kernel/include/linux/writeback.h

383 lines
12 KiB
C
Raw Normal View History

/*
* include/linux/writeback.h
*/
#ifndef WRITEBACK_H
#define WRITEBACK_H
#include <linux/sched.h>
#include <linux/workqueue.h>
#include <linux/fs.h>
#include <linux/flex_proportions.h>
#include <linux/backing-dev-defs.h>
DECLARE_PER_CPU(int, dirty_throttle_leaks);
writeback: introduce max-pause and pass-good dirty limits The max-pause limit helps to keep the sleep time inside balance_dirty_pages() within MAX_PAUSE=200ms. The 200ms max sleep means per task rate limit of 8pages/200ms=160KB/s when dirty exceeded, which normally is enough to stop dirtiers from continue pushing the dirty pages high, unless there are a sufficient large number of slow dirtiers (eg. 500 tasks doing 160KB/s will still sum up to 80MB/s, exceeding the write bandwidth of a slow disk and hence accumulating more and more dirty pages). The pass-good limit helps to let go of the good bdi's in the presence of a blocked bdi (ie. NFS server not responding) or slow USB disk which for some reason build up a large number of initial dirty pages that refuse to go away anytime soon. For example, given two bdi's A and B and the initial state bdi_thresh_A = dirty_thresh / 2 bdi_thresh_B = dirty_thresh / 2 bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 Then A get blocked, after a dozen seconds bdi_thresh_A = 0 bdi_thresh_B = dirty_thresh bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 The (bdi_dirty_B < bdi_thresh_B) test is now useless and the dirty pages will be effectively throttled by condition (nr_dirty < dirty_thresh). This has two problems: (1) we lose the protections for light dirtiers (2) balance_dirty_pages() effectively becomes IO-less because the (bdi_nr_reclaimable > bdi_thresh) test won't be true. This is good for IO, but balance_dirty_pages() loses an important way to break out of the loop which leads to more spread out throttle delays. DIRTY_PASSGOOD_AREA can eliminate the above issues. The only problem is, DIRTY_PASSGOOD_AREA needs to be defined as 2 to fully cover the above example while this patch uses the more conservative value 8 so as not to surprise people with too many dirty pages than expected. The max-pause limit won't noticeably impact the speed dirty pages are knocked down when there is a sudden drop of global/bdi dirty thresholds. Because the heavy dirties will be throttled below 160KB/s which is slow enough. It does help to avoid long dirty throttle delays and especially will make light dirtiers more responsive. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-06-20 12:18:42 +08:00
/*
* The 1/4 region under the global dirty thresh is for smooth dirty throttling:
*
* (thresh - thresh/DIRTY_FULL_SCOPE, thresh)
*
writeback: introduce max-pause and pass-good dirty limits The max-pause limit helps to keep the sleep time inside balance_dirty_pages() within MAX_PAUSE=200ms. The 200ms max sleep means per task rate limit of 8pages/200ms=160KB/s when dirty exceeded, which normally is enough to stop dirtiers from continue pushing the dirty pages high, unless there are a sufficient large number of slow dirtiers (eg. 500 tasks doing 160KB/s will still sum up to 80MB/s, exceeding the write bandwidth of a slow disk and hence accumulating more and more dirty pages). The pass-good limit helps to let go of the good bdi's in the presence of a blocked bdi (ie. NFS server not responding) or slow USB disk which for some reason build up a large number of initial dirty pages that refuse to go away anytime soon. For example, given two bdi's A and B and the initial state bdi_thresh_A = dirty_thresh / 2 bdi_thresh_B = dirty_thresh / 2 bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 Then A get blocked, after a dozen seconds bdi_thresh_A = 0 bdi_thresh_B = dirty_thresh bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 The (bdi_dirty_B < bdi_thresh_B) test is now useless and the dirty pages will be effectively throttled by condition (nr_dirty < dirty_thresh). This has two problems: (1) we lose the protections for light dirtiers (2) balance_dirty_pages() effectively becomes IO-less because the (bdi_nr_reclaimable > bdi_thresh) test won't be true. This is good for IO, but balance_dirty_pages() loses an important way to break out of the loop which leads to more spread out throttle delays. DIRTY_PASSGOOD_AREA can eliminate the above issues. The only problem is, DIRTY_PASSGOOD_AREA needs to be defined as 2 to fully cover the above example while this patch uses the more conservative value 8 so as not to surprise people with too many dirty pages than expected. The max-pause limit won't noticeably impact the speed dirty pages are knocked down when there is a sudden drop of global/bdi dirty thresholds. Because the heavy dirties will be throttled below 160KB/s which is slow enough. It does help to avoid long dirty throttle delays and especially will make light dirtiers more responsive. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-06-20 12:18:42 +08:00
* Further beyond, all dirtier tasks will enter a loop waiting (possibly long
* time) for the dirty pages to drop, unless written enough pages.
*
* The global dirty threshold is normally equal to the global dirty limit,
* except when the system suddenly allocates a lot of anonymous memory and
* knocks down the global dirty threshold quickly, in which case the global
* dirty limit will follow down slowly to prevent livelocking all dirtier tasks.
*/
#define DIRTY_SCOPE 8
#define DIRTY_FULL_SCOPE (DIRTY_SCOPE / 2)
writeback: introduce max-pause and pass-good dirty limits The max-pause limit helps to keep the sleep time inside balance_dirty_pages() within MAX_PAUSE=200ms. The 200ms max sleep means per task rate limit of 8pages/200ms=160KB/s when dirty exceeded, which normally is enough to stop dirtiers from continue pushing the dirty pages high, unless there are a sufficient large number of slow dirtiers (eg. 500 tasks doing 160KB/s will still sum up to 80MB/s, exceeding the write bandwidth of a slow disk and hence accumulating more and more dirty pages). The pass-good limit helps to let go of the good bdi's in the presence of a blocked bdi (ie. NFS server not responding) or slow USB disk which for some reason build up a large number of initial dirty pages that refuse to go away anytime soon. For example, given two bdi's A and B and the initial state bdi_thresh_A = dirty_thresh / 2 bdi_thresh_B = dirty_thresh / 2 bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 Then A get blocked, after a dozen seconds bdi_thresh_A = 0 bdi_thresh_B = dirty_thresh bdi_dirty_A = dirty_thresh / 2 bdi_dirty_B = dirty_thresh / 2 The (bdi_dirty_B < bdi_thresh_B) test is now useless and the dirty pages will be effectively throttled by condition (nr_dirty < dirty_thresh). This has two problems: (1) we lose the protections for light dirtiers (2) balance_dirty_pages() effectively becomes IO-less because the (bdi_nr_reclaimable > bdi_thresh) test won't be true. This is good for IO, but balance_dirty_pages() loses an important way to break out of the loop which leads to more spread out throttle delays. DIRTY_PASSGOOD_AREA can eliminate the above issues. The only problem is, DIRTY_PASSGOOD_AREA needs to be defined as 2 to fully cover the above example while this patch uses the more conservative value 8 so as not to surprise people with too many dirty pages than expected. The max-pause limit won't noticeably impact the speed dirty pages are knocked down when there is a sudden drop of global/bdi dirty thresholds. Because the heavy dirties will be throttled below 160KB/s which is slow enough. It does help to avoid long dirty throttle delays and especially will make light dirtiers more responsive. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-06-20 12:18:42 +08:00
struct backing_dev_info;
/*
* fs/fs-writeback.c
*/
enum writeback_sync_modes {
WB_SYNC_NONE, /* Don't wait on anything */
WB_SYNC_ALL, /* Wait on every mapping */
};
/*
* why some writeback work was initiated
*/
enum wb_reason {
WB_REASON_BACKGROUND,
WB_REASON_TRY_TO_FREE_PAGES,
WB_REASON_SYNC,
WB_REASON_PERIODIC,
WB_REASON_LAPTOP_TIMER,
WB_REASON_FREE_MORE_MEM,
WB_REASON_FS_FREE_SPACE,
/*
* There is no bdi forker thread any more and works are done
* by emergency worker, however, this is TPs userland visible
* and we'll be exposing exactly the same information,
* so it has a mismatch name.
*/
WB_REASON_FORKER_THREAD,
WB_REASON_MAX,
};
/*
* A control structure which tells the writeback code what to do. These are
* always on the stack, and hence need no locking. They are always initialised
* in a manner such that unspecified fields are set to zero.
*/
struct writeback_control {
long nr_to_write; /* Write this many pages, and decrement
this for each page written */
long pages_skipped; /* Pages which were not written */
/*
* For a_ops->writepages(): if start or end are non-zero then this is
* a hint that the filesystem need only write out the pages inside that
* byterange. The byte at `end' is included in the writeout request.
*/
[PATCH] writeback: fix range handling When a writeback_control's `start' and `end' fields are used to indicate a one-byte-range starting at file offset zero, the required values of .start=0,.end=0 mean that the ->writepages() implementation has no way of telling that it is being asked to perform a range request. Because we're currently overloading (start == 0 && end == 0) to mean "this is not a write-a-range request". To make all this sane, the patch changes range of writeback_control. So caller does: If it is calling ->writepages() to write pages, it sets range (range_start/end or range_cyclic) always. And if range_cyclic is true, ->writepages() thinks the range is cyclic, otherwise it just uses range_start and range_end. This patch does, - Add LLONG_MAX, LLONG_MIN, ULLONG_MAX to include/linux/kernel.h -1 is usually ok for range_end (type is long long). But, if someone did, range_end += val; range_end is "val - 1" u64val = range_end >> bits; u64val is "~(0ULL)" or something, they are wrong. So, this adds LLONG_MAX to avoid nasty things, and uses LLONG_MAX for range_end. - All callers of ->writepages() sets range_start/end or range_cyclic. - Fix updates of ->writeback_index. It seems already bit strange. If it starts at 0 and ended by check of nr_to_write, this last index may reduce chance to scan end of file. So, this updates ->writeback_index only if range_cyclic is true or whole-file is scanned. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Nathan Scott <nathans@sgi.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Steven French <sfrench@us.ibm.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:26 +08:00
loff_t range_start;
loff_t range_end;
enum writeback_sync_modes sync_mode;
unsigned for_kupdate:1; /* A kupdate writeback */
unsigned for_background:1; /* A background writeback */
unsigned tagged_writepages:1; /* tag-and-write to avoid livelock */
unsigned for_reclaim:1; /* Invoked from the page allocator */
[PATCH] writeback: fix range handling When a writeback_control's `start' and `end' fields are used to indicate a one-byte-range starting at file offset zero, the required values of .start=0,.end=0 mean that the ->writepages() implementation has no way of telling that it is being asked to perform a range request. Because we're currently overloading (start == 0 && end == 0) to mean "this is not a write-a-range request". To make all this sane, the patch changes range of writeback_control. So caller does: If it is calling ->writepages() to write pages, it sets range (range_start/end or range_cyclic) always. And if range_cyclic is true, ->writepages() thinks the range is cyclic, otherwise it just uses range_start and range_end. This patch does, - Add LLONG_MAX, LLONG_MIN, ULLONG_MAX to include/linux/kernel.h -1 is usually ok for range_end (type is long long). But, if someone did, range_end += val; range_end is "val - 1" u64val = range_end >> bits; u64val is "~(0ULL)" or something, they are wrong. So, this adds LLONG_MAX to avoid nasty things, and uses LLONG_MAX for range_end. - All callers of ->writepages() sets range_start/end or range_cyclic. - Fix updates of ->writeback_index. It seems already bit strange. If it starts at 0 and ended by check of nr_to_write, this last index may reduce chance to scan end of file. So, this updates ->writeback_index only if range_cyclic is true or whole-file is scanned. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Nathan Scott <nathans@sgi.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Steven French <sfrench@us.ibm.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:26 +08:00
unsigned range_cyclic:1; /* range_start is cyclic */
sync: don't block the flusher thread waiting on IO When sync does it's WB_SYNC_ALL writeback, it issues data Io and then immediately waits for IO completion. This is done in the context of the flusher thread, and hence completely ties up the flusher thread for the backing device until all the dirty inodes have been synced. On filesystems that are dirtying inodes constantly and quickly, this means the flusher thread can be tied up for minutes per sync call and hence badly affect system level write IO performance as the page cache cannot be cleaned quickly. We already have a wait loop for IO completion for sync(2), so cut this out of the flusher thread and delegate it to wait_sb_inodes(). Hence we can do rapid IO submission, and then wait for it all to complete. Effect of sync on fsmark before the patch: FSUse% Count Size Files/sec App Overhead ..... 0 640000 4096 35154.6 1026984 0 720000 4096 36740.3 1023844 0 800000 4096 36184.6 916599 0 880000 4096 1282.7 1054367 0 960000 4096 3951.3 918773 0 1040000 4096 40646.2 996448 0 1120000 4096 43610.1 895647 0 1200000 4096 40333.1 921048 And a single sync pass took: real 0m52.407s user 0m0.000s sys 0m0.090s After the patch, there is no impact on fsmark results, and each individual sync(2) operation run concurrently with the same fsmark workload takes roughly 7s: real 0m6.930s user 0m0.000s sys 0m0.039s IOWs, sync is 7-8x faster on a busy filesystem and does not have an adverse impact on ongoing async data write operations. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-02 20:38:35 +08:00
unsigned for_sync:1; /* sync(2) WB_SYNC_ALL writeback */
writeback: make writeback_control track the inode being written back Currently, for cgroup writeback, the IO submission paths directly associate the bio's with the blkcg from inode_to_wb_blkcg_css(); however, it'd be necessary to keep more writeback context to implement foreign inode writeback detection. wbc (writeback_control) is the natural fit for the extra context - it persists throughout the writeback of each inode and is passed all the way down to IO submission paths. This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and wbc_attach_fdatawrite_inode() which are used to associate wbc with the inode being written back. IO submission paths now use wbc_init_bio() instead of directly associating bio's with blkcg themselves. This leaves inode_to_wb_blkcg_css() w/o any user. The function is removed. wbc currently only tracks the associated wb (bdi_writeback). Future patches will add more for foreign inode detection. The association is established under i_lock which will be depended upon when migrating foreign inodes to other wb's. As currently, once established, inode to wb association never changes, going through wbc when initializing bio's doesn't cause any behavior changes. v2: submit_blk_blkcg() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 22:39:48 +08:00
#ifdef CONFIG_CGROUP_WRITEBACK
struct bdi_writeback *wb; /* wb this writeback is issued under */
writeback: implement foreign cgroup inode detection As concurrent write sharing of an inode is expected to be very rare and memcg only tracks page ownership on first-use basis severely confining the usefulness of such sharing, cgroup writeback tracks ownership per-inode. While the support for concurrent write sharing of an inode is deemed unnecessary, an inode being written to by different cgroups at different points in time is a lot more common, and, more importantly, charging only by first-use can too readily lead to grossly incorrect behaviors (single foreign page can lead to gigabytes of writeback to be incorrectly attributed). To resolve this issue, cgroup writeback detects the majority dirtier of an inode and will transfer the ownership to it. To avoid unnnecessary oscillation, the detection mechanism keeps track of history and gives out the switch verdict only if the foreign usage pattern is stable over a certain amount of time and/or writeback attempts. The detection mechanism has fairly low space and computation overhead. It adds 8 bytes to struct inode (one int and two u16's) and minimal amount of calculation per IO. The detection mechanism converges to the correct answer usually in several seconds of IO time when there's a clear majority dirtier. Even when there isn't, it can reach an acceptable answer fairly quickly under most circumstances. Please see wb_detach_inode() for more details. This patch only implements detection. Following patches will implement actual switching. v2: wbc_account_io() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-29 02:50:51 +08:00
struct inode *inode; /* inode being written out */
/* foreign inode detection, see wbc_detach_inode() */
int wb_id; /* current wb id */
int wb_lcand_id; /* last foreign candidate wb id */
int wb_tcand_id; /* this foreign candidate wb id */
size_t wb_bytes; /* bytes written by current wb */
size_t wb_lcand_bytes; /* bytes written by last candidate */
size_t wb_tcand_bytes; /* bytes written by this candidate */
writeback: make writeback_control track the inode being written back Currently, for cgroup writeback, the IO submission paths directly associate the bio's with the blkcg from inode_to_wb_blkcg_css(); however, it'd be necessary to keep more writeback context to implement foreign inode writeback detection. wbc (writeback_control) is the natural fit for the extra context - it persists throughout the writeback of each inode and is passed all the way down to IO submission paths. This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and wbc_attach_fdatawrite_inode() which are used to associate wbc with the inode being written back. IO submission paths now use wbc_init_bio() instead of directly associating bio's with blkcg themselves. This leaves inode_to_wb_blkcg_css() w/o any user. The function is removed. wbc currently only tracks the associated wb (bdi_writeback). Future patches will add more for foreign inode detection. The association is established under i_lock which will be depended upon when migrating foreign inodes to other wb's. As currently, once established, inode to wb association never changes, going through wbc when initializing bio's doesn't cause any behavior changes. v2: submit_blk_blkcg() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 22:39:48 +08:00
#endif
};
/*
* A wb_domain represents a domain that wb's (bdi_writeback's) belong to
* and are measured against each other in. There always is one global
* domain, global_wb_domain, that every wb in the system is a member of.
* This allows measuring the relative bandwidth of each wb to distribute
* dirtyable memory accordingly.
*/
struct wb_domain {
spinlock_t lock;
/*
* Scale the writeback cache size proportional to the relative
* writeout speed.
*
* We do this by keeping a floating proportion between BDIs, based
* on page writeback completions [end_page_writeback()]. Those
* devices that write out pages fastest will get the larger share,
* while the slower will get a smaller share.
*
* We use page writeout completions because we are interested in
* getting rid of dirty pages. Having them written out is the
* primary goal.
*
* We introduce a concept of time, a period over which we measure
* these events, because demand can/will vary over time. The length
* of this period itself is measured in page writeback completions.
*/
struct fprop_global completions;
struct timer_list period_timer; /* timer for aging of completions */
unsigned long period_time;
/*
* The dirtyable memory and dirty threshold could be suddenly
* knocked down by a large amount (eg. on the startup of KVM in a
* swapless system). This may throw the system into deep dirty
* exceeded state and throttle heavy/light dirtiers alike. To
* retain good responsiveness, maintain global_dirty_limit for
* tracking slowly down to the knocked down dirty threshold.
*
* Both fields are protected by ->lock.
*/
unsigned long dirty_limit_tstamp;
unsigned long dirty_limit;
};
/**
* wb_domain_size_changed - memory available to a wb_domain has changed
* @dom: wb_domain of interest
*
* This function should be called when the amount of memory available to
* @dom has changed. It resets @dom's dirty limit parameters to prevent
* the past values which don't match the current configuration from skewing
* dirty throttling. Without this, when memory size of a wb_domain is
* greatly reduced, the dirty throttling logic may allow too many pages to
* be dirtied leading to consecutive unnecessary OOMs and may get stuck in
* that situation.
*/
static inline void wb_domain_size_changed(struct wb_domain *dom)
{
spin_lock(&dom->lock);
dom->dirty_limit_tstamp = jiffies;
dom->dirty_limit = 0;
spin_unlock(&dom->lock);
}
/*
* fs/fs-writeback.c
*/
writeback: switch to per-bdi threads for flushing data This gets rid of pdflush for bdi writeout and kupdated style cleaning. pdflush writeout suffers from lack of locality and also requires more threads to handle the same workload, since it has to work in a non-blocking fashion against each queue. This also introduces lumpy behaviour and potential request starvation, since pdflush can be starved for queue access if others are accessing it. A sample ffsb workload that does random writes to files is about 8% faster here on a simple SATA drive during the benchmark phase. File layout also seems a LOT more smooth in vmstat: r b swpd free buff cache si so bi bo in cs us sy id wa 0 1 0 608848 2652 375372 0 0 0 71024 604 24 1 10 48 42 0 1 0 549644 2712 433736 0 0 0 60692 505 27 1 8 48 44 1 0 0 476928 2784 505192 0 0 4 29540 553 24 0 9 53 37 0 1 0 457972 2808 524008 0 0 0 54876 331 16 0 4 38 58 0 1 0 366128 2928 614284 0 0 4 92168 710 58 0 13 53 34 0 1 0 295092 3000 684140 0 0 0 62924 572 23 0 9 53 37 0 1 0 236592 3064 741704 0 0 4 58256 523 17 0 8 48 44 0 1 0 165608 3132 811464 0 0 0 57460 560 21 0 8 54 38 0 1 0 102952 3200 873164 0 0 4 74748 540 29 1 10 48 41 0 1 0 48604 3252 926472 0 0 0 53248 469 29 0 7 47 45 where vanilla tends to fluctuate a lot in the creation phase: r b swpd free buff cache si so bi bo in cs us sy id wa 1 1 0 678716 5792 303380 0 0 0 74064 565 50 1 11 52 36 1 0 0 662488 5864 319396 0 0 4 352 302 329 0 2 47 51 0 1 0 599312 5924 381468 0 0 0 78164 516 55 0 9 51 40 0 1 0 519952 6008 459516 0 0 4 78156 622 56 1 11 52 37 1 1 0 436640 6092 541632 0 0 0 82244 622 54 0 11 48 41 0 1 0 436640 6092 541660 0 0 0 8 152 39 0 0 51 49 0 1 0 332224 6200 644252 0 0 4 102800 728 46 1 13 49 36 1 0 0 274492 6260 701056 0 0 4 12328 459 49 0 7 50 43 0 1 0 211220 6324 763356 0 0 0 106940 515 37 1 10 51 39 1 0 0 160412 6376 813468 0 0 0 8224 415 43 0 6 49 45 1 1 0 85980 6452 886556 0 0 4 113516 575 39 1 11 54 34 0 2 0 85968 6452 886620 0 0 0 1640 158 211 0 0 46 54 A 10 disk test with btrfs performs 26% faster with per-bdi flushing. A SSD based writeback test on XFS performs over 20% better as well, with the throughput being very stable around 1GB/sec, where pdflush only manages 750MB/sec and fluctuates wildly while doing so. Random buffered writes to many files behave a lot better as well, as does random mmap'ed writes. A separate thread is added to sync the super blocks. In the long term, adding sync_supers_bdi() functionality could get rid of this thread again. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-09 15:08:54 +08:00
struct bdi_writeback;
void writeback_inodes_sb(struct super_block *, enum wb_reason reason);
void writeback_inodes_sb_nr(struct super_block *, unsigned long nr,
enum wb_reason reason);
bool try_to_writeback_inodes_sb(struct super_block *, enum wb_reason reason);
bool try_to_writeback_inodes_sb_nr(struct super_block *, unsigned long nr,
enum wb_reason reason);
void sync_inodes_sb(struct super_block *);
void wakeup_flusher_threads(long nr_pages, enum wb_reason reason);
void inode_wait_for_writeback(struct inode *inode);
/* writeback.h requires fs.h; it, too, is not included from here. */
static inline void wait_on_inode(struct inode *inode)
{
might_sleep();
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 13:16:04 +08:00
wait_on_bit(&inode->i_state, __I_NEW, TASK_UNINTERRUPTIBLE);
}
#ifdef CONFIG_CGROUP_WRITEBACK
writeback: make writeback_control track the inode being written back Currently, for cgroup writeback, the IO submission paths directly associate the bio's with the blkcg from inode_to_wb_blkcg_css(); however, it'd be necessary to keep more writeback context to implement foreign inode writeback detection. wbc (writeback_control) is the natural fit for the extra context - it persists throughout the writeback of each inode and is passed all the way down to IO submission paths. This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and wbc_attach_fdatawrite_inode() which are used to associate wbc with the inode being written back. IO submission paths now use wbc_init_bio() instead of directly associating bio's with blkcg themselves. This leaves inode_to_wb_blkcg_css() w/o any user. The function is removed. wbc currently only tracks the associated wb (bdi_writeback). Future patches will add more for foreign inode detection. The association is established under i_lock which will be depended upon when migrating foreign inodes to other wb's. As currently, once established, inode to wb association never changes, going through wbc when initializing bio's doesn't cause any behavior changes. v2: submit_blk_blkcg() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 22:39:48 +08:00
#include <linux/cgroup.h>
#include <linux/bio.h>
void __inode_attach_wb(struct inode *inode, struct page *page);
writeback: make writeback_control track the inode being written back Currently, for cgroup writeback, the IO submission paths directly associate the bio's with the blkcg from inode_to_wb_blkcg_css(); however, it'd be necessary to keep more writeback context to implement foreign inode writeback detection. wbc (writeback_control) is the natural fit for the extra context - it persists throughout the writeback of each inode and is passed all the way down to IO submission paths. This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and wbc_attach_fdatawrite_inode() which are used to associate wbc with the inode being written back. IO submission paths now use wbc_init_bio() instead of directly associating bio's with blkcg themselves. This leaves inode_to_wb_blkcg_css() w/o any user. The function is removed. wbc currently only tracks the associated wb (bdi_writeback). Future patches will add more for foreign inode detection. The association is established under i_lock which will be depended upon when migrating foreign inodes to other wb's. As currently, once established, inode to wb association never changes, going through wbc when initializing bio's doesn't cause any behavior changes. v2: submit_blk_blkcg() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 22:39:48 +08:00
void wbc_attach_and_unlock_inode(struct writeback_control *wbc,
struct inode *inode)
__releases(&inode->i_lock);
void wbc_detach_inode(struct writeback_control *wbc);
writeback: implement foreign cgroup inode detection As concurrent write sharing of an inode is expected to be very rare and memcg only tracks page ownership on first-use basis severely confining the usefulness of such sharing, cgroup writeback tracks ownership per-inode. While the support for concurrent write sharing of an inode is deemed unnecessary, an inode being written to by different cgroups at different points in time is a lot more common, and, more importantly, charging only by first-use can too readily lead to grossly incorrect behaviors (single foreign page can lead to gigabytes of writeback to be incorrectly attributed). To resolve this issue, cgroup writeback detects the majority dirtier of an inode and will transfer the ownership to it. To avoid unnnecessary oscillation, the detection mechanism keeps track of history and gives out the switch verdict only if the foreign usage pattern is stable over a certain amount of time and/or writeback attempts. The detection mechanism has fairly low space and computation overhead. It adds 8 bytes to struct inode (one int and two u16's) and minimal amount of calculation per IO. The detection mechanism converges to the correct answer usually in several seconds of IO time when there's a clear majority dirtier. Even when there isn't, it can reach an acceptable answer fairly quickly under most circumstances. Please see wb_detach_inode() for more details. This patch only implements detection. Following patches will implement actual switching. v2: wbc_account_io() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-29 02:50:51 +08:00
void wbc_account_io(struct writeback_control *wbc, struct page *page,
size_t bytes);
/**
* inode_attach_wb - associate an inode with its wb
* @inode: inode of interest
* @page: page being dirtied (may be NULL)
*
* If @inode doesn't have its wb, associate it with the wb matching the
* memcg of @page or, if @page is NULL, %current. May be called w/ or w/o
* @inode->i_lock.
*/
static inline void inode_attach_wb(struct inode *inode, struct page *page)
{
if (!inode->i_wb)
__inode_attach_wb(inode, page);
}
/**
* inode_detach_wb - disassociate an inode from its wb
* @inode: inode of interest
*
* @inode is being freed. Detach from its wb.
*/
static inline void inode_detach_wb(struct inode *inode)
{
if (inode->i_wb) {
wb_put(inode->i_wb);
inode->i_wb = NULL;
}
}
writeback: make writeback_control track the inode being written back Currently, for cgroup writeback, the IO submission paths directly associate the bio's with the blkcg from inode_to_wb_blkcg_css(); however, it'd be necessary to keep more writeback context to implement foreign inode writeback detection. wbc (writeback_control) is the natural fit for the extra context - it persists throughout the writeback of each inode and is passed all the way down to IO submission paths. This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and wbc_attach_fdatawrite_inode() which are used to associate wbc with the inode being written back. IO submission paths now use wbc_init_bio() instead of directly associating bio's with blkcg themselves. This leaves inode_to_wb_blkcg_css() w/o any user. The function is removed. wbc currently only tracks the associated wb (bdi_writeback). Future patches will add more for foreign inode detection. The association is established under i_lock which will be depended upon when migrating foreign inodes to other wb's. As currently, once established, inode to wb association never changes, going through wbc when initializing bio's doesn't cause any behavior changes. v2: submit_blk_blkcg() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 22:39:48 +08:00
/**
* wbc_attach_fdatawrite_inode - associate wbc and inode for fdatawrite
* @wbc: writeback_control of interest
* @inode: target inode
*
* This function is to be used by __filemap_fdatawrite_range(), which is an
* alternative entry point into writeback code, and first ensures @inode is
* associated with a bdi_writeback and attaches it to @wbc.
*/
static inline void wbc_attach_fdatawrite_inode(struct writeback_control *wbc,
struct inode *inode)
{
spin_lock(&inode->i_lock);
inode_attach_wb(inode, NULL);
wbc_attach_and_unlock_inode(wbc, inode);
}
/**
* wbc_init_bio - writeback specific initializtion of bio
* @wbc: writeback_control for the writeback in progress
* @bio: bio to be initialized
*
* @bio is a part of the writeback in progress controlled by @wbc. Perform
* writeback specific initialization. This is used to apply the cgroup
* writeback context.
*/
static inline void wbc_init_bio(struct writeback_control *wbc, struct bio *bio)
{
/*
* pageout() path doesn't attach @wbc to the inode being written
* out. This is intentional as we don't want the function to block
* behind a slow cgroup. Ultimately, we want pageout() to kick off
* regular writeback instead of writing things out itself.
*/
if (wbc->wb)
bio_associate_blkcg(bio, wbc->wb->blkcg_css);
}
#else /* CONFIG_CGROUP_WRITEBACK */
static inline void inode_attach_wb(struct inode *inode, struct page *page)
{
}
static inline void inode_detach_wb(struct inode *inode)
{
}
writeback: make writeback_control track the inode being written back Currently, for cgroup writeback, the IO submission paths directly associate the bio's with the blkcg from inode_to_wb_blkcg_css(); however, it'd be necessary to keep more writeback context to implement foreign inode writeback detection. wbc (writeback_control) is the natural fit for the extra context - it persists throughout the writeback of each inode and is passed all the way down to IO submission paths. This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and wbc_attach_fdatawrite_inode() which are used to associate wbc with the inode being written back. IO submission paths now use wbc_init_bio() instead of directly associating bio's with blkcg themselves. This leaves inode_to_wb_blkcg_css() w/o any user. The function is removed. wbc currently only tracks the associated wb (bdi_writeback). Future patches will add more for foreign inode detection. The association is established under i_lock which will be depended upon when migrating foreign inodes to other wb's. As currently, once established, inode to wb association never changes, going through wbc when initializing bio's doesn't cause any behavior changes. v2: submit_blk_blkcg() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 22:39:48 +08:00
static inline void wbc_attach_and_unlock_inode(struct writeback_control *wbc,
struct inode *inode)
__releases(&inode->i_lock)
{
spin_unlock(&inode->i_lock);
}
static inline void wbc_attach_fdatawrite_inode(struct writeback_control *wbc,
struct inode *inode)
{
}
static inline void wbc_detach_inode(struct writeback_control *wbc)
{
}
static inline void wbc_init_bio(struct writeback_control *wbc, struct bio *bio)
{
}
writeback: implement foreign cgroup inode detection As concurrent write sharing of an inode is expected to be very rare and memcg only tracks page ownership on first-use basis severely confining the usefulness of such sharing, cgroup writeback tracks ownership per-inode. While the support for concurrent write sharing of an inode is deemed unnecessary, an inode being written to by different cgroups at different points in time is a lot more common, and, more importantly, charging only by first-use can too readily lead to grossly incorrect behaviors (single foreign page can lead to gigabytes of writeback to be incorrectly attributed). To resolve this issue, cgroup writeback detects the majority dirtier of an inode and will transfer the ownership to it. To avoid unnnecessary oscillation, the detection mechanism keeps track of history and gives out the switch verdict only if the foreign usage pattern is stable over a certain amount of time and/or writeback attempts. The detection mechanism has fairly low space and computation overhead. It adds 8 bytes to struct inode (one int and two u16's) and minimal amount of calculation per IO. The detection mechanism converges to the correct answer usually in several seconds of IO time when there's a clear majority dirtier. Even when there isn't, it can reach an acceptable answer fairly quickly under most circumstances. Please see wb_detach_inode() for more details. This patch only implements detection. Following patches will implement actual switching. v2: wbc_account_io() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-29 02:50:51 +08:00
static inline void wbc_account_io(struct writeback_control *wbc,
struct page *page, size_t bytes)
{
}
#endif /* CONFIG_CGROUP_WRITEBACK */
/*
* mm/page-writeback.c
*/
#ifdef CONFIG_BLOCK
void laptop_io_completion(struct backing_dev_info *info);
void laptop_sync_completion(void);
void laptop_mode_sync(struct work_struct *work);
void laptop_mode_timer_fn(unsigned long data);
#else
static inline void laptop_sync_completion(void) { }
#endif
void throttle_vm_writeout(gfp_t gfp_mask);
mm: try to distribute dirty pages fairly across zones The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 07:07:49 +08:00
bool zone_dirty_ok(struct zone *zone);
int wb_domain_init(struct wb_domain *dom, gfp_t gfp);
#ifdef CONFIG_CGROUP_WRITEBACK
void wb_domain_exit(struct wb_domain *dom);
#endif
extern struct wb_domain global_wb_domain;
writeback: introduce smoothed global dirty limit The start of a heavy weight application (ie. KVM) may instantly knock down determine_dirtyable_memory() if the swap is not enabled or full. global_dirty_limits() and bdi_dirty_limit() will in turn get global/bdi dirty thresholds that are _much_ lower than the global/bdi dirty pages. balance_dirty_pages() will then heavily throttle all dirtiers including the light ones, until the dirty pages drop below the new dirty thresholds. During this _deep_ dirty-exceeded state, the system may appear rather unresponsive to the users. About "deep" dirty-exceeded: task_dirty_limit() assigns 1/8 lower dirty threshold to heavy dirtiers than light ones, and the dirty pages will be throttled around the heavy dirtiers' dirty threshold and reasonably below the light dirtiers' dirty threshold. In this state, only the heavy dirtiers will be throttled and the dirty pages are carefully controlled to not exceed the light dirtiers' dirty threshold. However if the threshold itself suddenly drops below the number of dirty pages, the light dirtiers will get heavily throttled. So introduce global_dirty_limit for tracking the global dirty threshold with policies - follow downwards slowly - follow up in one shot global_dirty_limit can effectively mask out the impact of sudden drop of dirtyable memory. It will be used in the next patch for two new type of dirty limits. Note that the new dirty limits are not going to avoid throttling the light dirtiers, but could limit their sleep time to 200ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-03-03 05:54:09 +08:00
/* These are exported to sysctl. */
extern int dirty_background_ratio;
mm: add dirty_background_bytes and dirty_bytes sysctls This change introduces two new sysctls to /proc/sys/vm: dirty_background_bytes and dirty_bytes. dirty_background_bytes is the counterpart to dirty_background_ratio and dirty_bytes is the counterpart to dirty_ratio. With growing memory capacities of individual machines, it's no longer sufficient to specify dirty thresholds as a percentage of the amount of dirtyable memory over the entire system. dirty_background_bytes and dirty_bytes specify quantities of memory, in bytes, that represent the dirty limits for the entire system. If either of these values is set, its value represents the amount of dirty memory that is needed to commence either background or direct writeback. When a `bytes' or `ratio' file is written, its counterpart becomes a function of the written value. For example, if dirty_bytes is written to be 8096, 8K of memory is required to commence direct writeback. dirty_ratio is then functionally equivalent to 8K / the amount of dirtyable memory: dirtyable_memory = free pages + mapped pages + file cache dirty_background_bytes = dirty_background_ratio * dirtyable_memory -or- dirty_background_ratio = dirty_background_bytes / dirtyable_memory AND dirty_bytes = dirty_ratio * dirtyable_memory -or- dirty_ratio = dirty_bytes / dirtyable_memory Only one of dirty_background_bytes and dirty_background_ratio may be specified at a time, and only one of dirty_bytes and dirty_ratio may be specified. When one sysctl is written, the other appears as 0 when read. The `bytes' files operate on a page size granularity since dirty limits are compared with ZVC values, which are in page units. Prior to this change, the minimum dirty_ratio was 5 as implemented by get_dirty_limits() although /proc/sys/vm/dirty_ratio would show any user written value between 0 and 100. This restriction is maintained, but dirty_bytes has a lower limit of only one page. Also prior to this change, the dirty_background_ratio could not equal or exceed dirty_ratio. This restriction is maintained in addition to restricting dirty_background_bytes. If either background threshold equals or exceeds that of the dirty threshold, it is implicitly set to half the dirty threshold. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 06:39:31 +08:00
extern unsigned long dirty_background_bytes;
extern int vm_dirty_ratio;
mm: add dirty_background_bytes and dirty_bytes sysctls This change introduces two new sysctls to /proc/sys/vm: dirty_background_bytes and dirty_bytes. dirty_background_bytes is the counterpart to dirty_background_ratio and dirty_bytes is the counterpart to dirty_ratio. With growing memory capacities of individual machines, it's no longer sufficient to specify dirty thresholds as a percentage of the amount of dirtyable memory over the entire system. dirty_background_bytes and dirty_bytes specify quantities of memory, in bytes, that represent the dirty limits for the entire system. If either of these values is set, its value represents the amount of dirty memory that is needed to commence either background or direct writeback. When a `bytes' or `ratio' file is written, its counterpart becomes a function of the written value. For example, if dirty_bytes is written to be 8096, 8K of memory is required to commence direct writeback. dirty_ratio is then functionally equivalent to 8K / the amount of dirtyable memory: dirtyable_memory = free pages + mapped pages + file cache dirty_background_bytes = dirty_background_ratio * dirtyable_memory -or- dirty_background_ratio = dirty_background_bytes / dirtyable_memory AND dirty_bytes = dirty_ratio * dirtyable_memory -or- dirty_ratio = dirty_bytes / dirtyable_memory Only one of dirty_background_bytes and dirty_background_ratio may be specified at a time, and only one of dirty_bytes and dirty_ratio may be specified. When one sysctl is written, the other appears as 0 when read. The `bytes' files operate on a page size granularity since dirty limits are compared with ZVC values, which are in page units. Prior to this change, the minimum dirty_ratio was 5 as implemented by get_dirty_limits() although /proc/sys/vm/dirty_ratio would show any user written value between 0 and 100. This restriction is maintained, but dirty_bytes has a lower limit of only one page. Also prior to this change, the dirty_background_ratio could not equal or exceed dirty_ratio. This restriction is maintained in addition to restricting dirty_background_bytes. If either background threshold equals or exceeds that of the dirty threshold, it is implicitly set to half the dirty threshold. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 06:39:31 +08:00
extern unsigned long vm_dirty_bytes;
extern unsigned int dirty_writeback_interval;
extern unsigned int dirty_expire_interval;
extern unsigned int dirtytime_expire_interval;
extern int vm_highmem_is_dirtyable;
extern int block_dump;
extern int laptop_mode;
mm: add dirty_background_bytes and dirty_bytes sysctls This change introduces two new sysctls to /proc/sys/vm: dirty_background_bytes and dirty_bytes. dirty_background_bytes is the counterpart to dirty_background_ratio and dirty_bytes is the counterpart to dirty_ratio. With growing memory capacities of individual machines, it's no longer sufficient to specify dirty thresholds as a percentage of the amount of dirtyable memory over the entire system. dirty_background_bytes and dirty_bytes specify quantities of memory, in bytes, that represent the dirty limits for the entire system. If either of these values is set, its value represents the amount of dirty memory that is needed to commence either background or direct writeback. When a `bytes' or `ratio' file is written, its counterpart becomes a function of the written value. For example, if dirty_bytes is written to be 8096, 8K of memory is required to commence direct writeback. dirty_ratio is then functionally equivalent to 8K / the amount of dirtyable memory: dirtyable_memory = free pages + mapped pages + file cache dirty_background_bytes = dirty_background_ratio * dirtyable_memory -or- dirty_background_ratio = dirty_background_bytes / dirtyable_memory AND dirty_bytes = dirty_ratio * dirtyable_memory -or- dirty_ratio = dirty_bytes / dirtyable_memory Only one of dirty_background_bytes and dirty_background_ratio may be specified at a time, and only one of dirty_bytes and dirty_ratio may be specified. When one sysctl is written, the other appears as 0 when read. The `bytes' files operate on a page size granularity since dirty limits are compared with ZVC values, which are in page units. Prior to this change, the minimum dirty_ratio was 5 as implemented by get_dirty_limits() although /proc/sys/vm/dirty_ratio would show any user written value between 0 and 100. This restriction is maintained, but dirty_bytes has a lower limit of only one page. Also prior to this change, the dirty_background_ratio could not equal or exceed dirty_ratio. This restriction is maintained in addition to restricting dirty_background_bytes. If either background threshold equals or exceeds that of the dirty threshold, it is implicitly set to half the dirty threshold. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 06:39:31 +08:00
extern int dirty_background_ratio_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
mm: add dirty_background_bytes and dirty_bytes sysctls This change introduces two new sysctls to /proc/sys/vm: dirty_background_bytes and dirty_bytes. dirty_background_bytes is the counterpart to dirty_background_ratio and dirty_bytes is the counterpart to dirty_ratio. With growing memory capacities of individual machines, it's no longer sufficient to specify dirty thresholds as a percentage of the amount of dirtyable memory over the entire system. dirty_background_bytes and dirty_bytes specify quantities of memory, in bytes, that represent the dirty limits for the entire system. If either of these values is set, its value represents the amount of dirty memory that is needed to commence either background or direct writeback. When a `bytes' or `ratio' file is written, its counterpart becomes a function of the written value. For example, if dirty_bytes is written to be 8096, 8K of memory is required to commence direct writeback. dirty_ratio is then functionally equivalent to 8K / the amount of dirtyable memory: dirtyable_memory = free pages + mapped pages + file cache dirty_background_bytes = dirty_background_ratio * dirtyable_memory -or- dirty_background_ratio = dirty_background_bytes / dirtyable_memory AND dirty_bytes = dirty_ratio * dirtyable_memory -or- dirty_ratio = dirty_bytes / dirtyable_memory Only one of dirty_background_bytes and dirty_background_ratio may be specified at a time, and only one of dirty_bytes and dirty_ratio may be specified. When one sysctl is written, the other appears as 0 when read. The `bytes' files operate on a page size granularity since dirty limits are compared with ZVC values, which are in page units. Prior to this change, the minimum dirty_ratio was 5 as implemented by get_dirty_limits() although /proc/sys/vm/dirty_ratio would show any user written value between 0 and 100. This restriction is maintained, but dirty_bytes has a lower limit of only one page. Also prior to this change, the dirty_background_ratio could not equal or exceed dirty_ratio. This restriction is maintained in addition to restricting dirty_background_bytes. If either background threshold equals or exceeds that of the dirty threshold, it is implicitly set to half the dirty threshold. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 06:39:31 +08:00
loff_t *ppos);
extern int dirty_background_bytes_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
mm: add dirty_background_bytes and dirty_bytes sysctls This change introduces two new sysctls to /proc/sys/vm: dirty_background_bytes and dirty_bytes. dirty_background_bytes is the counterpart to dirty_background_ratio and dirty_bytes is the counterpart to dirty_ratio. With growing memory capacities of individual machines, it's no longer sufficient to specify dirty thresholds as a percentage of the amount of dirtyable memory over the entire system. dirty_background_bytes and dirty_bytes specify quantities of memory, in bytes, that represent the dirty limits for the entire system. If either of these values is set, its value represents the amount of dirty memory that is needed to commence either background or direct writeback. When a `bytes' or `ratio' file is written, its counterpart becomes a function of the written value. For example, if dirty_bytes is written to be 8096, 8K of memory is required to commence direct writeback. dirty_ratio is then functionally equivalent to 8K / the amount of dirtyable memory: dirtyable_memory = free pages + mapped pages + file cache dirty_background_bytes = dirty_background_ratio * dirtyable_memory -or- dirty_background_ratio = dirty_background_bytes / dirtyable_memory AND dirty_bytes = dirty_ratio * dirtyable_memory -or- dirty_ratio = dirty_bytes / dirtyable_memory Only one of dirty_background_bytes and dirty_background_ratio may be specified at a time, and only one of dirty_bytes and dirty_ratio may be specified. When one sysctl is written, the other appears as 0 when read. The `bytes' files operate on a page size granularity since dirty limits are compared with ZVC values, which are in page units. Prior to this change, the minimum dirty_ratio was 5 as implemented by get_dirty_limits() although /proc/sys/vm/dirty_ratio would show any user written value between 0 and 100. This restriction is maintained, but dirty_bytes has a lower limit of only one page. Also prior to this change, the dirty_background_ratio could not equal or exceed dirty_ratio. This restriction is maintained in addition to restricting dirty_background_bytes. If either background threshold equals or exceeds that of the dirty threshold, it is implicitly set to half the dirty threshold. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 06:39:31 +08:00
loff_t *ppos);
mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 14:25:50 +08:00
extern int dirty_ratio_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 14:25:50 +08:00
loff_t *ppos);
mm: add dirty_background_bytes and dirty_bytes sysctls This change introduces two new sysctls to /proc/sys/vm: dirty_background_bytes and dirty_bytes. dirty_background_bytes is the counterpart to dirty_background_ratio and dirty_bytes is the counterpart to dirty_ratio. With growing memory capacities of individual machines, it's no longer sufficient to specify dirty thresholds as a percentage of the amount of dirtyable memory over the entire system. dirty_background_bytes and dirty_bytes specify quantities of memory, in bytes, that represent the dirty limits for the entire system. If either of these values is set, its value represents the amount of dirty memory that is needed to commence either background or direct writeback. When a `bytes' or `ratio' file is written, its counterpart becomes a function of the written value. For example, if dirty_bytes is written to be 8096, 8K of memory is required to commence direct writeback. dirty_ratio is then functionally equivalent to 8K / the amount of dirtyable memory: dirtyable_memory = free pages + mapped pages + file cache dirty_background_bytes = dirty_background_ratio * dirtyable_memory -or- dirty_background_ratio = dirty_background_bytes / dirtyable_memory AND dirty_bytes = dirty_ratio * dirtyable_memory -or- dirty_ratio = dirty_bytes / dirtyable_memory Only one of dirty_background_bytes and dirty_background_ratio may be specified at a time, and only one of dirty_bytes and dirty_ratio may be specified. When one sysctl is written, the other appears as 0 when read. The `bytes' files operate on a page size granularity since dirty limits are compared with ZVC values, which are in page units. Prior to this change, the minimum dirty_ratio was 5 as implemented by get_dirty_limits() although /proc/sys/vm/dirty_ratio would show any user written value between 0 and 100. This restriction is maintained, but dirty_bytes has a lower limit of only one page. Also prior to this change, the dirty_background_ratio could not equal or exceed dirty_ratio. This restriction is maintained in addition to restricting dirty_background_bytes. If either background threshold equals or exceeds that of the dirty threshold, it is implicitly set to half the dirty threshold. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 06:39:31 +08:00
extern int dirty_bytes_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
mm: add dirty_background_bytes and dirty_bytes sysctls This change introduces two new sysctls to /proc/sys/vm: dirty_background_bytes and dirty_bytes. dirty_background_bytes is the counterpart to dirty_background_ratio and dirty_bytes is the counterpart to dirty_ratio. With growing memory capacities of individual machines, it's no longer sufficient to specify dirty thresholds as a percentage of the amount of dirtyable memory over the entire system. dirty_background_bytes and dirty_bytes specify quantities of memory, in bytes, that represent the dirty limits for the entire system. If either of these values is set, its value represents the amount of dirty memory that is needed to commence either background or direct writeback. When a `bytes' or `ratio' file is written, its counterpart becomes a function of the written value. For example, if dirty_bytes is written to be 8096, 8K of memory is required to commence direct writeback. dirty_ratio is then functionally equivalent to 8K / the amount of dirtyable memory: dirtyable_memory = free pages + mapped pages + file cache dirty_background_bytes = dirty_background_ratio * dirtyable_memory -or- dirty_background_ratio = dirty_background_bytes / dirtyable_memory AND dirty_bytes = dirty_ratio * dirtyable_memory -or- dirty_ratio = dirty_bytes / dirtyable_memory Only one of dirty_background_bytes and dirty_background_ratio may be specified at a time, and only one of dirty_bytes and dirty_ratio may be specified. When one sysctl is written, the other appears as 0 when read. The `bytes' files operate on a page size granularity since dirty limits are compared with ZVC values, which are in page units. Prior to this change, the minimum dirty_ratio was 5 as implemented by get_dirty_limits() although /proc/sys/vm/dirty_ratio would show any user written value between 0 and 100. This restriction is maintained, but dirty_bytes has a lower limit of only one page. Also prior to this change, the dirty_background_ratio could not equal or exceed dirty_ratio. This restriction is maintained in addition to restricting dirty_background_bytes. If either background threshold equals or exceeds that of the dirty threshold, it is implicitly set to half the dirty threshold. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 06:39:31 +08:00
loff_t *ppos);
int dirtytime_interval_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 14:25:50 +08:00
struct ctl_table;
int dirty_writeback_centisecs_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty);
unsigned long wb_calc_thresh(struct bdi_writeback *wb, unsigned long thresh);
writeback: move bandwidth related fields from backing_dev_info into bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:13:28 +08:00
void wb_update_bandwidth(struct bdi_writeback *wb, unsigned long start_time);
void page_writeback_init(void);
void balance_dirty_pages_ratelimited(struct address_space *mapping);
bool wb_over_bg_thresh(struct bdi_writeback *wb);
typedef int (*writepage_t)(struct page *page, struct writeback_control *wbc,
void *data);
int generic_writepages(struct address_space *mapping,
struct writeback_control *wbc);
void tag_pages_for_writeback(struct address_space *mapping,
pgoff_t start, pgoff_t end);
int write_cache_pages(struct address_space *mapping,
struct writeback_control *wbc, writepage_t writepage,
void *data);
int do_writepages(struct address_space *mapping, struct writeback_control *wbc);
void writeback_set_ratelimit(void);
void tag_pages_for_writeback(struct address_space *mapping,
pgoff_t start, pgoff_t end);
void account_page_redirty(struct page *page);
#endif /* WRITEBACK_H */