OpenCloudOS-Kernel/drivers/md/dm-raid1.c

1317 lines
31 KiB
C
Raw Normal View History

/*
* Copyright (C) 2003 Sistina Software Limited.
* Copyright (C) 2005-2008 Red Hat, Inc. All rights reserved.
*
* This file is released under the GPL.
*/
#include "dm-bio-list.h"
#include "dm-bio-record.h"
#include <linux/init.h>
#include <linux/mempool.h>
#include <linux/module.h>
#include <linux/pagemap.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/device-mapper.h>
#include <linux/dm-io.h>
#include <linux/dm-dirty-log.h>
#include <linux/dm-kcopyd.h>
#include <linux/dm-region-hash.h>
#define DM_MSG_PREFIX "raid1"
#define MAX_RECOVERY 1 /* Maximum number of regions recovered in parallel. */
#define DM_IO_PAGES 64
#define DM_KCOPYD_PAGES 64
#define DM_RAID1_HANDLE_ERRORS 0x01
#define errors_handled(p) ((p)->features & DM_RAID1_HANDLE_ERRORS)
static DECLARE_WAIT_QUEUE_HEAD(_kmirrord_recovery_stopped);
/*-----------------------------------------------------------------
* Mirror set structures.
*---------------------------------------------------------------*/
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
enum dm_raid1_error {
DM_RAID1_WRITE_ERROR,
DM_RAID1_SYNC_ERROR,
DM_RAID1_READ_ERROR
};
struct mirror {
struct mirror_set *ms;
atomic_t error_count;
unsigned long error_type;
struct dm_dev *dev;
sector_t offset;
};
struct mirror_set {
struct dm_target *ti;
struct list_head list;
uint64_t features;
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
spinlock_t lock; /* protects the lists */
struct bio_list reads;
struct bio_list writes;
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
struct bio_list failures;
struct dm_region_hash *rh;
struct dm_kcopyd_client *kcopyd_client;
struct dm_io_client *io_client;
mempool_t *read_record_pool;
/* recovery */
region_t nr_regions;
int in_sync;
int log_failure;
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
atomic_t suspend;
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
atomic_t default_mirror; /* Default mirror */
struct workqueue_struct *kmirrord_wq;
struct work_struct kmirrord_work;
struct timer_list timer;
unsigned long timer_pending;
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
struct work_struct trigger_event;
unsigned nr_mirrors;
struct mirror mirror[0];
};
static void wakeup_mirrord(void *context)
{
struct mirror_set *ms = context;
queue_work(ms->kmirrord_wq, &ms->kmirrord_work);
}
static void delayed_wake_fn(unsigned long data)
{
struct mirror_set *ms = (struct mirror_set *) data;
clear_bit(0, &ms->timer_pending);
wakeup_mirrord(ms);
}
static void delayed_wake(struct mirror_set *ms)
{
if (test_and_set_bit(0, &ms->timer_pending))
return;
ms->timer.expires = jiffies + HZ / 5;
ms->timer.data = (unsigned long) ms;
ms->timer.function = delayed_wake_fn;
add_timer(&ms->timer);
}
static void wakeup_all_recovery_waiters(void *context)
{
wake_up_all(&_kmirrord_recovery_stopped);
}
static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw)
{
unsigned long flags;
int should_wake = 0;
struct bio_list *bl;
bl = (rw == WRITE) ? &ms->writes : &ms->reads;
spin_lock_irqsave(&ms->lock, flags);
should_wake = !(bl->head);
bio_list_add(bl, bio);
spin_unlock_irqrestore(&ms->lock, flags);
if (should_wake)
wakeup_mirrord(ms);
}
static void dispatch_bios(void *context, struct bio_list *bio_list)
{
struct mirror_set *ms = context;
struct bio *bio;
while ((bio = bio_list_pop(bio_list)))
queue_bio(ms, bio, WRITE);
}
#define MIN_READ_RECORDS 20
struct dm_raid1_read_record {
struct mirror *m;
struct dm_bio_details details;
};
/*
* Every mirror should look like this one.
*/
#define DEFAULT_MIRROR 0
/*
* This is yucky. We squirrel the mirror struct away inside
* bi_next for read/write buffers. This is safe since the bh
* doesn't get submitted to the lower levels of block layer.
*/
static struct mirror *bio_get_m(struct bio *bio)
{
return (struct mirror *) bio->bi_next;
}
static void bio_set_m(struct bio *bio, struct mirror *m)
{
bio->bi_next = (struct bio *) m;
}
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
static struct mirror *get_default_mirror(struct mirror_set *ms)
{
return &ms->mirror[atomic_read(&ms->default_mirror)];
}
static void set_default_mirror(struct mirror *m)
{
struct mirror_set *ms = m->ms;
struct mirror *m0 = &(ms->mirror[0]);
atomic_set(&ms->default_mirror, m - m0);
}
/* fail_mirror
* @m: mirror device to fail
* @error_type: one of the enum's, DM_RAID1_*_ERROR
*
* If errors are being handled, record the type of
* error encountered for this device. If this type
* of error has already been recorded, we can return;
* otherwise, we must signal userspace by triggering
* an event. Additionally, if the device is the
* primary device, we must choose a new primary, but
* only if the mirror is in-sync.
*
* This function must not block.
*/
static void fail_mirror(struct mirror *m, enum dm_raid1_error error_type)
{
struct mirror_set *ms = m->ms;
struct mirror *new;
if (!errors_handled(ms))
return;
/*
* error_count is used for nothing more than a
* simple way to tell if a device has encountered
* errors.
*/
atomic_inc(&m->error_count);
if (test_and_set_bit(error_type, &m->error_type))
return;
if (m != get_default_mirror(ms))
goto out;
if (!ms->in_sync) {
/*
* Better to issue requests to same failing device
* than to risk returning corrupt data.
*/
DMERR("Primary mirror (%s) failed while out-of-sync: "
"Reads may fail.", m->dev->name);
goto out;
}
for (new = ms->mirror; new < ms->mirror + ms->nr_mirrors; new++)
if (!atomic_read(&new->error_count)) {
set_default_mirror(new);
break;
}
if (unlikely(new == ms->mirror + ms->nr_mirrors))
DMWARN("All sides of mirror have failed.");
out:
schedule_work(&ms->trigger_event);
}
/*-----------------------------------------------------------------
* Recovery.
*
* When a mirror is first activated we may find that some regions
* are in the no-sync state. We have to recover these by
* recopying from the default mirror to all the others.
*---------------------------------------------------------------*/
static void recovery_complete(int read_err, unsigned long write_err,
void *context)
{
struct dm_region *reg = context;
struct mirror_set *ms = dm_rh_region_context(reg);
int m, bit = 0;
if (read_err) {
/* Read error means the failure of default mirror. */
DMERR_LIMIT("Unable to read primary mirror during recovery");
fail_mirror(get_default_mirror(ms), DM_RAID1_SYNC_ERROR);
}
if (write_err) {
DMERR_LIMIT("Write error during recovery (error = 0x%lx)",
write_err);
/*
* Bits correspond to devices (excluding default mirror).
* The default mirror cannot change during recovery.
*/
for (m = 0; m < ms->nr_mirrors; m++) {
if (&ms->mirror[m] == get_default_mirror(ms))
continue;
if (test_bit(bit, &write_err))
fail_mirror(ms->mirror + m,
DM_RAID1_SYNC_ERROR);
bit++;
}
}
dm_rh_recovery_end(reg, !(read_err || write_err));
}
static int recover(struct mirror_set *ms, struct dm_region *reg)
{
int r;
unsigned i;
struct dm_io_region from, to[DM_KCOPYD_MAX_REGIONS], *dest;
struct mirror *m;
unsigned long flags = 0;
region_t key = dm_rh_get_region_key(reg);
sector_t region_size = dm_rh_get_region_size(ms->rh);
/* fill in the source */
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
m = get_default_mirror(ms);
from.bdev = m->dev->bdev;
from.sector = m->offset + dm_rh_region_to_sector(ms->rh, key);
if (key == (ms->nr_regions - 1)) {
/*
* The final region may be smaller than
* region_size.
*/
from.count = ms->ti->len & (region_size - 1);
if (!from.count)
from.count = region_size;
} else
from.count = region_size;
/* fill in the destinations */
for (i = 0, dest = to; i < ms->nr_mirrors; i++) {
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
if (&ms->mirror[i] == get_default_mirror(ms))
continue;
m = ms->mirror + i;
dest->bdev = m->dev->bdev;
dest->sector = m->offset + dm_rh_region_to_sector(ms->rh, key);
dest->count = from.count;
dest++;
}
/* hand to kcopyd */
if (!errors_handled(ms))
set_bit(DM_KCOPYD_IGNORE_ERROR, &flags);
r = dm_kcopyd_copy(ms->kcopyd_client, &from, ms->nr_mirrors - 1, to,
flags, recovery_complete, reg);
return r;
}
static void do_recovery(struct mirror_set *ms)
{
struct dm_region *reg;
struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
int r;
/*
* Start quiescing some regions.
*/
dm_rh_recovery_prepare(ms->rh);
/*
* Copy any already quiesced regions.
*/
while ((reg = dm_rh_recovery_start(ms->rh))) {
r = recover(ms, reg);
if (r)
dm_rh_recovery_end(reg, 0);
}
/*
* Update the in sync flag.
*/
if (!ms->in_sync &&
(log->type->get_sync_count(log) == ms->nr_regions)) {
/* the sync is complete */
dm_table_event(ms->ti->table);
ms->in_sync = 1;
}
}
/*-----------------------------------------------------------------
* Reads
*---------------------------------------------------------------*/
static struct mirror *choose_mirror(struct mirror_set *ms, sector_t sector)
{
struct mirror *m = get_default_mirror(ms);
do {
if (likely(!atomic_read(&m->error_count)))
return m;
if (m-- == ms->mirror)
m += ms->nr_mirrors;
} while (m != get_default_mirror(ms));
return NULL;
}
static int default_ok(struct mirror *m)
{
struct mirror *default_mirror = get_default_mirror(m->ms);
return !atomic_read(&default_mirror->error_count);
}
static int mirror_available(struct mirror_set *ms, struct bio *bio)
{
struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
region_t region = dm_rh_bio_to_region(ms->rh, bio);
if (log->type->in_sync(log, region, 0))
return choose_mirror(ms, bio->bi_sector) ? 1 : 0;
return 0;
}
/*
* remap a buffer to a particular mirror.
*/
static sector_t map_sector(struct mirror *m, struct bio *bio)
{
return m->offset + (bio->bi_sector - m->ms->ti->begin);
}
static void map_bio(struct mirror *m, struct bio *bio)
{
bio->bi_bdev = m->dev->bdev;
bio->bi_sector = map_sector(m, bio);
}
static void map_region(struct dm_io_region *io, struct mirror *m,
struct bio *bio)
{
io->bdev = m->dev->bdev;
io->sector = map_sector(m, bio);
io->count = bio->bi_size >> 9;
}
/*-----------------------------------------------------------------
* Reads
*---------------------------------------------------------------*/
static void read_callback(unsigned long error, void *context)
{
struct bio *bio = context;
struct mirror *m;
m = bio_get_m(bio);
bio_set_m(bio, NULL);
if (likely(!error)) {
bio_endio(bio, 0);
return;
}
fail_mirror(m, DM_RAID1_READ_ERROR);
if (likely(default_ok(m)) || mirror_available(m->ms, bio)) {
DMWARN_LIMIT("Read failure on mirror device %s. "
"Trying alternative device.",
m->dev->name);
queue_bio(m->ms, bio, bio_rw(bio));
return;
}
DMERR_LIMIT("Read failure on mirror device %s. Failing I/O.",
m->dev->name);
bio_endio(bio, -EIO);
}
/* Asynchronous read. */
static void read_async_bio(struct mirror *m, struct bio *bio)
{
struct dm_io_region io;
struct dm_io_request io_req = {
.bi_rw = READ,
.mem.type = DM_IO_BVEC,
.mem.ptr.bvec = bio->bi_io_vec + bio->bi_idx,
.notify.fn = read_callback,
.notify.context = bio,
.client = m->ms->io_client,
};
map_region(&io, m, bio);
bio_set_m(bio, m);
BUG_ON(dm_io(&io_req, 1, &io, NULL));
}
static inline int region_in_sync(struct mirror_set *ms, region_t region,
int may_block)
{
int state = dm_rh_get_state(ms->rh, region, may_block);
return state == DM_RH_CLEAN || state == DM_RH_DIRTY;
}
static void do_reads(struct mirror_set *ms, struct bio_list *reads)
{
region_t region;
struct bio *bio;
struct mirror *m;
while ((bio = bio_list_pop(reads))) {
region = dm_rh_bio_to_region(ms->rh, bio);
m = get_default_mirror(ms);
/*
* We can only read balance if the region is in sync.
*/
if (likely(region_in_sync(ms, region, 1)))
m = choose_mirror(ms, bio->bi_sector);
else if (m && atomic_read(&m->error_count))
m = NULL;
if (likely(m))
read_async_bio(m, bio);
else
bio_endio(bio, -EIO);
}
}
/*-----------------------------------------------------------------
* Writes.
*
* We do different things with the write io depending on the
* state of the region that it's in:
*
* SYNC: increment pending, use kcopyd to write to *all* mirrors
* RECOVERING: delay the io until recovery completes
* NOSYNC: increment pending, just write to the default mirror
*---------------------------------------------------------------*/
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
static void write_callback(unsigned long error, void *context)
{
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
unsigned i, ret = 0;
struct bio *bio = (struct bio *) context;
struct mirror_set *ms;
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
int uptodate = 0;
int should_wake = 0;
unsigned long flags;
ms = bio_get_m(bio)->ms;
bio_set_m(bio, NULL);
/*
* NOTE: We don't decrement the pending count here,
* instead it is done by the targets endio function.
* This way we handle both writes to SYNC and NOSYNC
* regions with the same code.
*/
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
if (likely(!error))
goto out;
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
for (i = 0; i < ms->nr_mirrors; i++)
if (test_bit(i, &error))
fail_mirror(ms->mirror + i, DM_RAID1_WRITE_ERROR);
else
uptodate = 1;
if (unlikely(!uptodate)) {
DMERR("All replicated volumes dead, failing I/O");
/* None of the writes succeeded, fail the I/O. */
ret = -EIO;
} else if (errors_handled(ms)) {
/*
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
* Need to raise event. Since raising
* events can block, we need to do it in
* the main thread.
*/
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
spin_lock_irqsave(&ms->lock, flags);
if (!ms->failures.head)
should_wake = 1;
bio_list_add(&ms->failures, bio);
spin_unlock_irqrestore(&ms->lock, flags);
if (should_wake)
wakeup_mirrord(ms);
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
return;
}
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
out:
bio_endio(bio, ret);
}
static void do_write(struct mirror_set *ms, struct bio *bio)
{
unsigned int i;
struct dm_io_region io[ms->nr_mirrors], *dest = io;
struct mirror *m;
struct dm_io_request io_req = {
.bi_rw = WRITE,
.mem.type = DM_IO_BVEC,
.mem.ptr.bvec = bio->bi_io_vec + bio->bi_idx,
.notify.fn = write_callback,
.notify.context = bio,
.client = ms->io_client,
};
for (i = 0, m = ms->mirror; i < ms->nr_mirrors; i++, m++)
map_region(dest++, m, bio);
/*
* Use default mirror because we only need it to retrieve the reference
* to the mirror set in write_callback().
*/
bio_set_m(bio, get_default_mirror(ms));
BUG_ON(dm_io(&io_req, ms->nr_mirrors, io, NULL));
}
static void do_writes(struct mirror_set *ms, struct bio_list *writes)
{
int state;
struct bio *bio;
struct bio_list sync, nosync, recover, *this_list = NULL;
if (!writes->head)
return;
/*
* Classify each write.
*/
bio_list_init(&sync);
bio_list_init(&nosync);
bio_list_init(&recover);
while ((bio = bio_list_pop(writes))) {
state = dm_rh_get_state(ms->rh,
dm_rh_bio_to_region(ms->rh, bio), 1);
switch (state) {
case DM_RH_CLEAN:
case DM_RH_DIRTY:
this_list = &sync;
break;
case DM_RH_NOSYNC:
this_list = &nosync;
break;
case DM_RH_RECOVERING:
this_list = &recover;
break;
}
bio_list_add(this_list, bio);
}
/*
* Increment the pending counts for any regions that will
* be written to (writes to recover regions are going to
* be delayed).
*/
dm_rh_inc_pending(ms->rh, &sync);
dm_rh_inc_pending(ms->rh, &nosync);
ms->log_failure = dm_rh_flush(ms->rh) ? 1 : 0;
/*
* Dispatch io.
*/
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
if (unlikely(ms->log_failure)) {
spin_lock_irq(&ms->lock);
bio_list_merge(&ms->failures, &sync);
spin_unlock_irq(&ms->lock);
wakeup_mirrord(ms);
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
} else
while ((bio = bio_list_pop(&sync)))
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
do_write(ms, bio);
while ((bio = bio_list_pop(&recover)))
dm_rh_delay(ms->rh, bio);
while ((bio = bio_list_pop(&nosync))) {
map_bio(get_default_mirror(ms), bio);
generic_make_request(bio);
}
}
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
static void do_failures(struct mirror_set *ms, struct bio_list *failures)
{
struct bio *bio;
if (!failures->head)
return;
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
if (!ms->log_failure) {
while ((bio = bio_list_pop(failures))) {
ms->in_sync = 0;
dm_rh_mark_nosync(ms->rh, bio, bio->bi_size, 0);
}
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
return;
}
/*
* If the log has failed, unattempted writes are being
* put on the failures list. We can't issue those writes
* until a log has been marked, so we must store them.
*
* If a 'noflush' suspend is in progress, we can requeue
* the I/O's to the core. This give userspace a chance
* to reconfigure the mirror, at which point the core
* will reissue the writes. If the 'noflush' flag is
* not set, we have no choice but to return errors.
*
* Some writes on the failures list may have been
* submitted before the log failure and represent a
* failure to write to one of the devices. It is ok
* for us to treat them the same and requeue them
* as well.
*/
if (dm_noflush_suspending(ms->ti)) {
while ((bio = bio_list_pop(failures)))
bio_endio(bio, DM_ENDIO_REQUEUE);
return;
}
if (atomic_read(&ms->suspend)) {
while ((bio = bio_list_pop(failures)))
bio_endio(bio, -EIO);
return;
}
spin_lock_irq(&ms->lock);
bio_list_merge(&ms->failures, failures);
spin_unlock_irq(&ms->lock);
delayed_wake(ms);
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
}
static void trigger_event(struct work_struct *work)
{
struct mirror_set *ms =
container_of(work, struct mirror_set, trigger_event);
dm_table_event(ms->ti->table);
}
/*-----------------------------------------------------------------
* kmirrord
*---------------------------------------------------------------*/
static void do_mirror(struct work_struct *work)
{
struct mirror_set *ms = container_of(work, struct mirror_set,
kmirrord_work);
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
struct bio_list reads, writes, failures;
unsigned long flags;
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
spin_lock_irqsave(&ms->lock, flags);
reads = ms->reads;
writes = ms->writes;
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
failures = ms->failures;
bio_list_init(&ms->reads);
bio_list_init(&ms->writes);
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
bio_list_init(&ms->failures);
spin_unlock_irqrestore(&ms->lock, flags);
dm_rh_update_states(ms->rh, errors_handled(ms));
do_recovery(ms);
do_reads(ms, &reads);
do_writes(ms, &writes);
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
do_failures(ms, &failures);
dm: unplug queues in threads Remove an avoidable 3ms delay on some dm-raid1 and kcopyd I/O. It is specified that any submitted bio without BIO_RW_SYNC flag may plug the queue (i.e. block the requests from being dispatched to the physical device). The queue is unplugged when the caller calls blk_unplug() function. Usually, the sequence is that someone calls submit_bh to submit IO on a buffer. The IO plugs the queue and waits (to be possibly joined with other adjacent bios). Then, when the caller calls wait_on_buffer(), it unplugs the queue and submits the IOs to the disk. This was happenning: When doing O_SYNC writes, function fsync_buffers_list() submits a list of bios to dm_raid1, the bios are added to dm_raid1 write queue and kmirrord is woken up. fsync_buffers_list() calls wait_on_buffer(). That unplugs the queue, but there are no bios on the device queue as they are still in the dm_raid1 queue. wait_on_buffer() starts waiting until the IO is finished. kmirrord is scheduled, kmirrord takes bios and submits them to the devices. The submitted bio plugs the harddisk queue but there is no one to unplug it. (The process that called wait_on_buffer() is already sleeping.) So there is a 3ms timeout, after which the queues on the harddisks are unplugged and requests are processed. This 3ms timeout meant that in certain workloads (e.g. O_SYNC, 8kb writes), dm-raid1 is 10 times slower than md raid1. Every time we submit something asynchronously via dm_io, we must unplug the queue actually to send the request to the device. This patch adds an unplug call to kmirrord - while processing requests, it keeps the queue plugged (so that adjacent bios can be merged); when it finishes processing all the bios, it unplugs the queue to submit the bios. It also fixes kcopyd which has the same potential problem. All kcopyd requests are submitted with BIO_RW_SYNC. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Acked-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-25 05:10:47 +08:00
dm_table_unplug_all(ms->ti->table);
}
/*-----------------------------------------------------------------
* Target functions
*---------------------------------------------------------------*/
static struct mirror_set *alloc_context(unsigned int nr_mirrors,
uint32_t region_size,
struct dm_target *ti,
struct dm_dirty_log *dl)
{
size_t len;
struct mirror_set *ms = NULL;
len = sizeof(*ms) + (sizeof(ms->mirror[0]) * nr_mirrors);
2007-07-19 16:49:03 +08:00
ms = kzalloc(len, GFP_KERNEL);
if (!ms) {
ti->error = "Cannot allocate mirror context";
return NULL;
}
spin_lock_init(&ms->lock);
ms->ti = ti;
ms->nr_mirrors = nr_mirrors;
ms->nr_regions = dm_sector_div_up(ti->len, region_size);
ms->in_sync = 0;
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
ms->log_failure = 0;
atomic_set(&ms->suspend, 0);
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
atomic_set(&ms->default_mirror, DEFAULT_MIRROR);
len = sizeof(struct dm_raid1_read_record);
ms->read_record_pool = mempool_create_kmalloc_pool(MIN_READ_RECORDS,
len);
if (!ms->read_record_pool) {
ti->error = "Error creating mirror read_record_pool";
kfree(ms);
return NULL;
}
ms->io_client = dm_io_client_create(DM_IO_PAGES);
if (IS_ERR(ms->io_client)) {
ti->error = "Error creating dm_io client";
mempool_destroy(ms->read_record_pool);
kfree(ms);
return NULL;
}
ms->rh = dm_region_hash_create(ms, dispatch_bios, wakeup_mirrord,
wakeup_all_recovery_waiters,
ms->ti->begin, MAX_RECOVERY,
dl, region_size, ms->nr_regions);
if (IS_ERR(ms->rh)) {
ti->error = "Error creating dirty region hash";
dm_io_client_destroy(ms->io_client);
mempool_destroy(ms->read_record_pool);
kfree(ms);
return NULL;
}
return ms;
}
static void free_context(struct mirror_set *ms, struct dm_target *ti,
unsigned int m)
{
while (m--)
dm_put_device(ti, ms->mirror[m].dev);
dm_io_client_destroy(ms->io_client);
dm_region_hash_destroy(ms->rh);
mempool_destroy(ms->read_record_pool);
kfree(ms);
}
static inline int _check_region_size(struct dm_target *ti, uint32_t size)
{
return !(size % (PAGE_SIZE >> 9) || !is_power_of_2(size) ||
size > ti->len);
}
static int get_mirror(struct mirror_set *ms, struct dm_target *ti,
unsigned int mirror, char **argv)
{
unsigned long long offset;
if (sscanf(argv[1], "%llu", &offset) != 1) {
ti->error = "Invalid offset";
return -EINVAL;
}
if (dm_get_device(ti, argv[0], offset, ti->len,
dm_table_get_mode(ti->table),
&ms->mirror[mirror].dev)) {
ti->error = "Device lookup failure";
return -ENXIO;
}
ms->mirror[mirror].ms = ms;
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
atomic_set(&(ms->mirror[mirror].error_count), 0);
ms->mirror[mirror].error_type = 0;
ms->mirror[mirror].offset = offset;
return 0;
}
/*
* Create dirty log: log_type #log_params <log_params>
*/
static struct dm_dirty_log *create_dirty_log(struct dm_target *ti,
unsigned argc, char **argv,
unsigned *args_used)
{
unsigned param_count;
struct dm_dirty_log *dl;
if (argc < 2) {
ti->error = "Insufficient mirror log arguments";
return NULL;
}
if (sscanf(argv[1], "%u", &param_count) != 1) {
ti->error = "Invalid mirror log argument count";
return NULL;
}
*args_used = 2 + param_count;
if (argc < *args_used) {
ti->error = "Insufficient mirror log arguments";
return NULL;
}
dl = dm_dirty_log_create(argv[0], ti, param_count, argv + 2);
if (!dl) {
ti->error = "Error creating mirror dirty log";
return NULL;
}
if (!_check_region_size(ti, dl->type->get_region_size(dl))) {
ti->error = "Invalid region size";
dm_dirty_log_destroy(dl);
return NULL;
}
return dl;
}
static int parse_features(struct mirror_set *ms, unsigned argc, char **argv,
unsigned *args_used)
{
unsigned num_features;
struct dm_target *ti = ms->ti;
*args_used = 0;
if (!argc)
return 0;
if (sscanf(argv[0], "%u", &num_features) != 1) {
ti->error = "Invalid number of features";
return -EINVAL;
}
argc--;
argv++;
(*args_used)++;
if (num_features > argc) {
ti->error = "Not enough arguments to support feature count";
return -EINVAL;
}
if (!strcmp("handle_errors", argv[0]))
ms->features |= DM_RAID1_HANDLE_ERRORS;
else {
ti->error = "Unrecognised feature requested";
return -EINVAL;
}
(*args_used)++;
return 0;
}
/*
* Construct a mirror mapping:
*
* log_type #log_params <log_params>
* #mirrors [mirror_path offset]{2,}
* [#features <features>]
*
* log_type is "core" or "disk"
* #log_params is between 1 and 3
*
* If present, features must be "handle_errors".
*/
static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv)
{
int r;
unsigned int nr_mirrors, m, args_used;
struct mirror_set *ms;
struct dm_dirty_log *dl;
dl = create_dirty_log(ti, argc, argv, &args_used);
if (!dl)
return -EINVAL;
argv += args_used;
argc -= args_used;
if (!argc || sscanf(argv[0], "%u", &nr_mirrors) != 1 ||
nr_mirrors < 2 || nr_mirrors > DM_KCOPYD_MAX_REGIONS + 1) {
ti->error = "Invalid number of mirrors";
dm_dirty_log_destroy(dl);
return -EINVAL;
}
argv++, argc--;
if (argc < nr_mirrors * 2) {
ti->error = "Too few mirror arguments";
dm_dirty_log_destroy(dl);
return -EINVAL;
}
ms = alloc_context(nr_mirrors, dl->type->get_region_size(dl), ti, dl);
if (!ms) {
dm_dirty_log_destroy(dl);
return -ENOMEM;
}
/* Get the mirror parameter sets */
for (m = 0; m < nr_mirrors; m++) {
r = get_mirror(ms, ti, m, argv);
if (r) {
free_context(ms, ti, m);
return r;
}
argv += 2;
argc -= 2;
}
ti->private = ms;
ti->split_io = dm_rh_get_region_size(ms->rh);
ms->kmirrord_wq = create_singlethread_workqueue("kmirrord");
if (!ms->kmirrord_wq) {
DMERR("couldn't start kmirrord");
r = -ENOMEM;
goto err_free_context;
}
INIT_WORK(&ms->kmirrord_work, do_mirror);
init_timer(&ms->timer);
ms->timer_pending = 0;
dm raid1: handle write failures This patch gives mirror the ability to handle device failures during normal write operations. The 'write_callback' function is called when a write completes. If all the writes failed or succeeded, we report failure or success respectively. If some of the writes failed, we call fail_mirror; which increments the error count for the device, notes the type of error encountered (DM_RAID1_WRITE_ERROR), and selects a new primary (if necessary). Note that the primary device can never change while the mirror is not in-sync (IOW, while recovery is happening.) This means that the scenario where a failed write changes the primary and gives recovery_complete a chance to misread the primary never happens. The fact that the primary can change has necessitated the change to the default_mirror field. We need to protect against reading garbage while the primary changes. We then add the bio to a new list in the mirror set, 'failures'. For every bio in the 'failures' list, we call a new function, '__bio_mark_nosync', where we mark the region 'not-in-sync' in the log and properly set the region state as, RH_NOSYNC. Userspace must also be notified of the failure. This is done by 'raising an event' (dm_table_event()). If fail_mirror is called in process context the event can be raised right away. If in interrupt context, the event is deferred to the kmirrord thread - which raises the event if 'event_waiting' is set. Backwards compatibility is maintained by ignoring errors if the DM_FEATURES_HANDLE_ERRORS flag is not present. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:29 +08:00
INIT_WORK(&ms->trigger_event, trigger_event);
r = parse_features(ms, argc, argv, &args_used);
if (r)
goto err_destroy_wq;
argv += args_used;
argc -= args_used;
/*
* Any read-balancing addition depends on the
* DM_RAID1_HANDLE_ERRORS flag being present.
* This is because the decision to balance depends
* on the sync state of a region. If the above
* flag is not present, we ignore errors; and
* the sync state may be inaccurate.
*/
if (argc) {
ti->error = "Too many mirror arguments";
r = -EINVAL;
goto err_destroy_wq;
}
r = dm_kcopyd_client_create(DM_KCOPYD_PAGES, &ms->kcopyd_client);
if (r)
goto err_destroy_wq;
wakeup_mirrord(ms);
return 0;
err_destroy_wq:
destroy_workqueue(ms->kmirrord_wq);
err_free_context:
free_context(ms, ti, ms->nr_mirrors);
return r;
}
static void mirror_dtr(struct dm_target *ti)
{
struct mirror_set *ms = (struct mirror_set *) ti->private;
del_timer_sync(&ms->timer);
flush_workqueue(ms->kmirrord_wq);
flush_scheduled_work();
dm_kcopyd_client_destroy(ms->kcopyd_client);
destroy_workqueue(ms->kmirrord_wq);
free_context(ms, ti, ms->nr_mirrors);
}
/*
* Mirror mapping function
*/
static int mirror_map(struct dm_target *ti, struct bio *bio,
union map_info *map_context)
{
int r, rw = bio_rw(bio);
struct mirror *m;
struct mirror_set *ms = ti->private;
struct dm_raid1_read_record *read_record = NULL;
struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
if (rw == WRITE) {
/* Save region for mirror_end_io() handler */
map_context->ll = dm_rh_bio_to_region(ms->rh, bio);
queue_bio(ms, bio, rw);
return DM_MAPIO_SUBMITTED;
}
r = log->type->in_sync(log, dm_rh_bio_to_region(ms->rh, bio), 0);
if (r < 0 && r != -EWOULDBLOCK)
return r;
/*
* If region is not in-sync queue the bio.
*/
if (!r || (r == -EWOULDBLOCK)) {
if (rw == READA)
return -EWOULDBLOCK;
queue_bio(ms, bio, rw);
return DM_MAPIO_SUBMITTED;
}
/*
* The region is in-sync and we can perform reads directly.
* Store enough information so we can retry if it fails.
*/
m = choose_mirror(ms, bio->bi_sector);
if (unlikely(!m))
return -EIO;
read_record = mempool_alloc(ms->read_record_pool, GFP_NOIO);
if (likely(read_record)) {
dm_bio_record(&read_record->details, bio);
map_context->ptr = read_record;
read_record->m = m;
}
map_bio(m, bio);
return DM_MAPIO_REMAPPED;
}
static int mirror_end_io(struct dm_target *ti, struct bio *bio,
int error, union map_info *map_context)
{
int rw = bio_rw(bio);
struct mirror_set *ms = (struct mirror_set *) ti->private;
struct mirror *m = NULL;
struct dm_bio_details *bd = NULL;
struct dm_raid1_read_record *read_record = map_context->ptr;
/*
* We need to dec pending if this was a write.
*/
if (rw == WRITE) {
dm_rh_dec(ms->rh, map_context->ll);
return error;
}
if (error == -EOPNOTSUPP)
goto out;
if ((error == -EWOULDBLOCK) && bio_rw_ahead(bio))
goto out;
if (unlikely(error)) {
if (!read_record) {
/*
* There wasn't enough memory to record necessary
* information for a retry or there was no other
* mirror in-sync.
*/
DMERR_LIMIT("Mirror read failed.");
return -EIO;
}
m = read_record->m;
DMERR("Mirror read failed from %s. Trying alternative device.",
m->dev->name);
fail_mirror(m, DM_RAID1_READ_ERROR);
/*
* A failed read is requeued for another attempt using an intact
* mirror.
*/
if (default_ok(m) || mirror_available(ms, bio)) {
bd = &read_record->details;
dm_bio_restore(bd, bio);
mempool_free(read_record, ms->read_record_pool);
map_context->ptr = NULL;
queue_bio(ms, bio, rw);
return 1;
}
DMERR("All replicated volumes dead, failing I/O");
}
out:
if (read_record) {
mempool_free(read_record, ms->read_record_pool);
map_context->ptr = NULL;
}
return error;
}
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
static void mirror_presuspend(struct dm_target *ti)
{
struct mirror_set *ms = (struct mirror_set *) ti->private;
struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
atomic_set(&ms->suspend, 1);
/*
* We must finish up all the work that we've
* generated (i.e. recovery work).
*/
dm_rh_stop_recovery(ms->rh);
wait_event(_kmirrord_recovery_stopped,
!dm_rh_recovery_in_flight(ms->rh));
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
if (log->type->presuspend && log->type->presuspend(log))
/* FIXME: need better error handling */
DMWARN("log presuspend failed");
/*
* Now that recovery is complete/stopped and the
* delayed bios are queued, we need to wait for
* the worker thread to complete. This way,
* we know that all of our I/O has been pushed.
*/
flush_workqueue(ms->kmirrord_wq);
}
static void mirror_postsuspend(struct dm_target *ti)
{
struct mirror_set *ms = ti->private;
struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
if (log->type->postsuspend && log->type->postsuspend(log))
/* FIXME: need better error handling */
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
DMWARN("log postsuspend failed");
}
static void mirror_resume(struct dm_target *ti)
{
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
struct mirror_set *ms = ti->private;
struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
atomic_set(&ms->suspend, 0);
if (log->type->resume && log->type->resume(log))
/* FIXME: need better error handling */
DMWARN("log resume failed");
dm_rh_start_recovery(ms->rh);
}
/*
* device_status_char
* @m: mirror device/leg we want the status of
*
* We return one character representing the most severe error
* we have encountered.
* A => Alive - No failures
* D => Dead - A write failure occurred leaving mirror out-of-sync
* S => Sync - A sychronization failure occurred, mirror out-of-sync
* R => Read - A read failure occurred, mirror data unaffected
*
* Returns: <char>
*/
static char device_status_char(struct mirror *m)
{
if (!atomic_read(&(m->error_count)))
return 'A';
return (test_bit(DM_RAID1_WRITE_ERROR, &(m->error_type))) ? 'D' :
(test_bit(DM_RAID1_SYNC_ERROR, &(m->error_type))) ? 'S' :
(test_bit(DM_RAID1_READ_ERROR, &(m->error_type))) ? 'R' : 'U';
}
static int mirror_status(struct dm_target *ti, status_type_t type,
char *result, unsigned int maxlen)
{
unsigned int m, sz = 0;
struct mirror_set *ms = (struct mirror_set *) ti->private;
struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh);
char buffer[ms->nr_mirrors + 1];
switch (type) {
case STATUSTYPE_INFO:
DMEMIT("%d ", ms->nr_mirrors);
for (m = 0; m < ms->nr_mirrors; m++) {
DMEMIT("%s ", ms->mirror[m].dev->name);
buffer[m] = device_status_char(&(ms->mirror[m]));
}
buffer[m] = '\0';
DMEMIT("%llu/%llu 1 %s ",
(unsigned long long)log->type->get_sync_count(log),
(unsigned long long)ms->nr_regions, buffer);
sz += log->type->status(log, type, result+sz, maxlen-sz);
break;
case STATUSTYPE_TABLE:
sz = log->type->status(log, type, result, maxlen);
DMEMIT("%d", ms->nr_mirrors);
for (m = 0; m < ms->nr_mirrors; m++)
DMEMIT(" %s %llu", ms->mirror[m].dev->name,
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
(unsigned long long)ms->mirror[m].offset);
if (ms->features & DM_RAID1_HANDLE_ERRORS)
DMEMIT(" 1 handle_errors");
}
return 0;
}
static struct target_type mirror_target = {
.name = "mirror",
.version = {1, 0, 20},
.module = THIS_MODULE,
.ctr = mirror_ctr,
.dtr = mirror_dtr,
.map = mirror_map,
.end_io = mirror_end_io,
dm raid1: fix EIO after log failure This patch adds the ability to requeue write I/O to core device-mapper when there is a log device failure. If a write to the log produces and error, the pending writes are put on the "failures" list. Since the log is marked as failed, they will stay on the failures list until a suspend happens. Suspends come in two phases, presuspend and postsuspend. We must make sure that all the writes on the failures list are requeued in the presuspend phase (a requirement of dm core). This means that recovery must be complete (because writes may be delayed behind it) and the failures list must be requeued before we return from presuspend. The mechanisms to ensure recovery is complete (or stopped) was already in place, but needed to be moved from postsuspend to presuspend. We rely on 'flush_workqueue' to ensure that the mirror thread is complete and therefore, has requeued all writes in the failures list. Because we are using flush_workqueue, we must ensure that no additional 'queue_work' calls will produce additional I/O that we need to requeue (because once we return from presuspend, we are unable to do anything about it). 'queue_work' is called in response to the following functions: - complete_resync_work = NA, recovery is stopped - rh_dec (mirror_end_io) = NA, only calls 'queue_work' if it is ready to recover the region (recovery is stopped) or it needs to clear the region in the log* **this doesn't get called while suspending** - rh_recovery_end = NA, recovery is stopped - rh_recovery_start = NA, recovery is stopped - write_callback = 1) Writes w/o failures simply call bio_endio -> mirror_end_io -> rh_dec (see rh_dec above) 2) Writes with failures are put on the failures list and queue_work is called** ** write_callbacks don't happen during suspend ** - do_failures = NA, 'queue_work' not called if suspending - add_mirror (initialization) = NA, only done on mirror creation - queue_bio = NA, 1) delayed I/O scheduled before flush_workqueue is called. 2) No more I/Os are being issued. 3) Re-attempted READs can still be handled. (Write completions are handled through rh_dec/ write_callback - mention above - and do not use queue_bio.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 10:11:35 +08:00
.presuspend = mirror_presuspend,
.postsuspend = mirror_postsuspend,
.resume = mirror_resume,
.status = mirror_status,
};
static int __init dm_mirror_init(void)
{
int r;
r = dm_register_target(&mirror_target);
if (r < 0)
DMERR("Failed to register mirror target");
return r;
}
static void __exit dm_mirror_exit(void)
{
int r;
r = dm_unregister_target(&mirror_target);
if (r < 0)
DMERR("unregister failed %d", r);
}
/* Module hooks */
module_init(dm_mirror_init);
module_exit(dm_mirror_exit);
MODULE_DESCRIPTION(DM_NAME " mirror target");
MODULE_AUTHOR("Joe Thornber");
MODULE_LICENSE("GPL");