OpenCloudOS-Kernel/fs/hfsplus/xattr.c

886 lines
23 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/hfsplus/xattr.c
*
* Vyacheslav Dubeyko <slava@dubeyko.com>
*
* Logic of processing extended attributes
*/
#include "hfsplus_fs.h"
hfsplus: fix worst-case unicode to char conversion of file names and attributes This is a series of 3 patches which corrects issues in HFS+ concerning the use of non-english file names and attributes. Names and attributes are stored internally as UTF-16 units up to a fixed maximum size, and convert to and from user-representation by NLS. The code incorrectly assume that NLS string lengths are equal to unicode lengths, which is only true for English ascii usage. This patch (of 3): The HFS Plus Volume Format specification (TN1150) states that file names are stored internally as a maximum of 255 unicode characters, as defined by The Unicode Standard, Version 2.0 [Unicode, Inc. ISBN 0-201-48345-9]. File names are converted by the NLS system on Linux before presented to the user. 255 CJK characters converts to UTF-8 with 1 unicode character to up to 3 bytes, and to GB18030 with 1 unicode character to up to 4 bytes. Thus, trying in a UTF-8 locale to list files with names of more than 85 CJK characters results in: $ ls /mnt ls: reading directory /mnt: File name too long The receiving buffer to hfsplus_uni2asc() needs to be 255 x NLS_MAX_CHARSET_SIZE bytes, not 255 bytes as the code has always been. Similar consideration applies to attributes, which are stored internally as a maximum of 127 UTF-16BE units. See XNU source for an up-to-date reference on attributes. Strictly speaking, the maximum value of NLS_MAX_CHARSET_SIZE = 6 is not attainable in the case of conversion to UTF-8, as going beyond 3 bytes requires the use of surrogate pairs, i.e. consuming two input units. Thanks Anton Altaparmakov for reviewing an earlier version of this change. This patch fixes all callers of hfsplus_uni2asc(), and also enables the use of long non-English file names in HFS+. The getting and setting, and general usage of long non-English attributes requires further forthcoming work, in the following patches of this series. [akpm@linux-foundation.org: fix build] Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Reviewed-by: Anton Altaparmakov <anton@tuxera.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Sougata Santra <sougata@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 05:36:21 +08:00
#include <linux/nls.h>
#include "xattr.h"
static int hfsplus_removexattr(struct inode *inode, const char *name);
const struct xattr_handler *hfsplus_xattr_handlers[] = {
&hfsplus_xattr_osx_handler,
&hfsplus_xattr_user_handler,
&hfsplus_xattr_trusted_handler,
&hfsplus_xattr_security_handler,
NULL
};
static int strcmp_xattr_finder_info(const char *name)
{
if (name) {
return strncmp(name, HFSPLUS_XATTR_FINDER_INFO_NAME,
sizeof(HFSPLUS_XATTR_FINDER_INFO_NAME));
}
return -1;
}
static int strcmp_xattr_acl(const char *name)
{
if (name) {
return strncmp(name, HFSPLUS_XATTR_ACL_NAME,
sizeof(HFSPLUS_XATTR_ACL_NAME));
}
return -1;
}
static bool is_known_namespace(const char *name)
{
if (strncmp(name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN) &&
strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN) &&
strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN) &&
strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN))
return false;
return true;
}
static void hfsplus_init_header_node(struct inode *attr_file,
u32 clump_size,
char *buf, u16 node_size)
{
struct hfs_bnode_desc *desc;
struct hfs_btree_header_rec *head;
u16 offset;
__be16 *rec_offsets;
u32 hdr_node_map_rec_bits;
char *bmp;
u32 used_nodes;
u32 used_bmp_bytes;
hfsplus: fix compiler warning on PowerPC Commit a99b7069aab8 ("hfsplus: Fix undefined __divdi3 in hfsplus_init_header_node()") introduced do_div() to xattr.c and the warning below too. As Geert remarked: "tmp" is "loff_t" which is "__kernel_loff_t", which is "long long", i.e. signed, while include/asm-generic/div64.h compares its type with "uint64_t". As inode sizes are positive, it should be safe to change the type of "tmp" to "u64". In file included from arch/powerpc/include/asm/div64.h:1:0, from include/linux/kernel.h:124, from include/asm-generic/bug.h:13, from arch/powerpc/include/asm/bug.h:127, from include/linux/bug.h:4, from include/linux/thread_info.h:11, from include/asm-generic/preempt.h:4, from arch/powerpc/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/spinlock.h:50, from include/linux/wait.h:8, from include/linux/fs.h:6, from fs/hfsplus/hfsplus_fs.h:19, from fs/hfsplus/xattr.c:9: fs/hfsplus/xattr.c: In function 'hfsplus_init_header_node': include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ ^ fs/hfsplus/xattr.c:86:2: note: in expansion of macro 'do_div' do_div(tmp, node_size); ^ Signed-off-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 05:36:32 +08:00
u64 tmp;
hfs_dbg(ATTR_MOD, "init_hdr_attr_file: clump %u, node_size %u\n",
clump_size, node_size);
/* The end of the node contains list of record offsets */
rec_offsets = (__be16 *)(buf + node_size);
desc = (struct hfs_bnode_desc *)buf;
desc->type = HFS_NODE_HEADER;
desc->num_recs = cpu_to_be16(HFSPLUS_BTREE_HDR_NODE_RECS_COUNT);
offset = sizeof(struct hfs_bnode_desc);
*--rec_offsets = cpu_to_be16(offset);
head = (struct hfs_btree_header_rec *)(buf + offset);
head->node_size = cpu_to_be16(node_size);
tmp = i_size_read(attr_file);
do_div(tmp, node_size);
head->node_count = cpu_to_be32(tmp);
head->free_nodes = cpu_to_be32(be32_to_cpu(head->node_count) - 1);
head->clump_size = cpu_to_be32(clump_size);
head->attributes |= cpu_to_be32(HFS_TREE_BIGKEYS | HFS_TREE_VARIDXKEYS);
head->max_key_len = cpu_to_be16(HFSPLUS_ATTR_KEYLEN - sizeof(u16));
offset += sizeof(struct hfs_btree_header_rec);
*--rec_offsets = cpu_to_be16(offset);
offset += HFSPLUS_BTREE_HDR_USER_BYTES;
*--rec_offsets = cpu_to_be16(offset);
hdr_node_map_rec_bits = 8 * (node_size - offset - (4 * sizeof(u16)));
if (be32_to_cpu(head->node_count) > hdr_node_map_rec_bits) {
u32 map_node_bits;
u32 map_nodes;
desc->next = cpu_to_be32(be32_to_cpu(head->leaf_tail) + 1);
map_node_bits = 8 * (node_size - sizeof(struct hfs_bnode_desc) -
(2 * sizeof(u16)) - 2);
map_nodes = (be32_to_cpu(head->node_count) -
hdr_node_map_rec_bits +
(map_node_bits - 1)) / map_node_bits;
be32_add_cpu(&head->free_nodes, 0 - map_nodes);
}
bmp = buf + offset;
used_nodes =
be32_to_cpu(head->node_count) - be32_to_cpu(head->free_nodes);
used_bmp_bytes = used_nodes / 8;
if (used_bmp_bytes) {
memset(bmp, 0xFF, used_bmp_bytes);
bmp += used_bmp_bytes;
used_nodes %= 8;
}
*bmp = ~(0xFF >> used_nodes);
offset += hdr_node_map_rec_bits / 8;
*--rec_offsets = cpu_to_be16(offset);
}
static int hfsplus_create_attributes_file(struct super_block *sb)
{
int err = 0;
struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
struct inode *attr_file;
struct hfsplus_inode_info *hip;
u32 clump_size;
u16 node_size = HFSPLUS_ATTR_TREE_NODE_SIZE;
char *buf;
int index, written;
struct address_space *mapping;
struct page *page;
int old_state = HFSPLUS_EMPTY_ATTR_TREE;
hfs_dbg(ATTR_MOD, "create_attr_file: ino %d\n", HFSPLUS_ATTR_CNID);
check_attr_tree_state_again:
switch (atomic_read(&sbi->attr_tree_state)) {
case HFSPLUS_EMPTY_ATTR_TREE:
if (old_state != atomic_cmpxchg(&sbi->attr_tree_state,
old_state,
HFSPLUS_CREATING_ATTR_TREE))
goto check_attr_tree_state_again;
break;
case HFSPLUS_CREATING_ATTR_TREE:
/*
* This state means that another thread is in process
* of AttributesFile creation. Theoretically, it is
* possible to be here. But really __setxattr() method
* first of all calls hfs_find_init() for lookup in
* B-tree of CatalogFile. This method locks mutex of
* CatalogFile's B-tree. As a result, if some thread
* is inside AttributedFile creation operation then
* another threads will be waiting unlocking of
* CatalogFile's B-tree's mutex. However, if code will
* change then we will return error code (-EAGAIN) from
* here. Really, it means that first try to set of xattr
* fails with error but second attempt will have success.
*/
return -EAGAIN;
case HFSPLUS_VALID_ATTR_TREE:
return 0;
case HFSPLUS_FAILED_ATTR_TREE:
return -EOPNOTSUPP;
default:
BUG();
}
attr_file = hfsplus_iget(sb, HFSPLUS_ATTR_CNID);
if (IS_ERR(attr_file)) {
pr_err("failed to load attributes file\n");
return PTR_ERR(attr_file);
}
BUG_ON(i_size_read(attr_file) != 0);
hip = HFSPLUS_I(attr_file);
clump_size = hfsplus_calc_btree_clump_size(sb->s_blocksize,
node_size,
sbi->sect_count,
HFSPLUS_ATTR_CNID);
mutex_lock(&hip->extents_lock);
hip->clump_blocks = clump_size >> sbi->alloc_blksz_shift;
mutex_unlock(&hip->extents_lock);
if (sbi->free_blocks <= (hip->clump_blocks << 1)) {
err = -ENOSPC;
goto end_attr_file_creation;
}
while (hip->alloc_blocks < hip->clump_blocks) {
err = hfsplus_file_extend(attr_file, false);
if (unlikely(err)) {
pr_err("failed to extend attributes file\n");
goto end_attr_file_creation;
}
hip->phys_size = attr_file->i_size =
(loff_t)hip->alloc_blocks << sbi->alloc_blksz_shift;
hip->fs_blocks = hip->alloc_blocks << sbi->fs_shift;
inode_set_bytes(attr_file, attr_file->i_size);
}
buf = kzalloc(node_size, GFP_NOFS);
if (!buf) {
err = -ENOMEM;
goto end_attr_file_creation;
}
hfsplus_init_header_node(attr_file, clump_size, buf, node_size);
mapping = attr_file->i_mapping;
index = 0;
written = 0;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
for (; written < node_size; index++, written += PAGE_SIZE) {
void *kaddr;
page = read_mapping_page(mapping, index, NULL);
if (IS_ERR(page)) {
err = PTR_ERR(page);
goto failed_header_node_init;
}
kaddr = kmap_atomic(page);
memcpy(kaddr, buf + written,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
min_t(size_t, PAGE_SIZE, node_size - written));
kunmap_atomic(kaddr);
set_page_dirty(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
}
hfsplus_mark_inode_dirty(attr_file, HFSPLUS_I_ATTR_DIRTY);
sbi->attr_tree = hfs_btree_open(sb, HFSPLUS_ATTR_CNID);
if (!sbi->attr_tree)
pr_err("failed to load attributes file\n");
failed_header_node_init:
kfree(buf);
end_attr_file_creation:
iput(attr_file);
if (!err)
atomic_set(&sbi->attr_tree_state, HFSPLUS_VALID_ATTR_TREE);
else if (err == -ENOSPC)
atomic_set(&sbi->attr_tree_state, HFSPLUS_EMPTY_ATTR_TREE);
else
atomic_set(&sbi->attr_tree_state, HFSPLUS_FAILED_ATTR_TREE);
return err;
}
int __hfsplus_setxattr(struct inode *inode, const char *name,
const void *value, size_t size, int flags)
{
int err;
struct hfs_find_data cat_fd;
hfsplus_cat_entry entry;
u16 cat_entry_flags, cat_entry_type;
u16 folder_finderinfo_len = sizeof(struct DInfo) +
sizeof(struct DXInfo);
u16 file_finderinfo_len = sizeof(struct FInfo) +
sizeof(struct FXInfo);
if ((!S_ISREG(inode->i_mode) &&
!S_ISDIR(inode->i_mode)) ||
HFSPLUS_IS_RSRC(inode))
return -EOPNOTSUPP;
if (value == NULL)
return hfsplus_removexattr(inode, name);
err = hfs_find_init(HFSPLUS_SB(inode->i_sb)->cat_tree, &cat_fd);
if (err) {
pr_err("can't init xattr find struct\n");
return err;
}
err = hfsplus_find_cat(inode->i_sb, inode->i_ino, &cat_fd);
if (err) {
pr_err("catalog searching failed\n");
goto end_setxattr;
}
if (!strcmp_xattr_finder_info(name)) {
if (flags & XATTR_CREATE) {
pr_err("xattr exists yet\n");
err = -EOPNOTSUPP;
goto end_setxattr;
}
hfs_bnode_read(cat_fd.bnode, &entry, cat_fd.entryoffset,
sizeof(hfsplus_cat_entry));
if (be16_to_cpu(entry.type) == HFSPLUS_FOLDER) {
if (size == folder_finderinfo_len) {
memcpy(&entry.folder.info, value,
folder_finderinfo_len);
hfs_bnode_write(cat_fd.bnode, &entry,
cat_fd.entryoffset,
sizeof(struct hfsplus_cat_folder));
hfsplus_mark_inode_dirty(inode,
HFSPLUS_I_CAT_DIRTY);
} else {
err = -ERANGE;
goto end_setxattr;
}
} else if (be16_to_cpu(entry.type) == HFSPLUS_FILE) {
if (size == file_finderinfo_len) {
memcpy(&entry.file.info, value,
file_finderinfo_len);
hfs_bnode_write(cat_fd.bnode, &entry,
cat_fd.entryoffset,
sizeof(struct hfsplus_cat_file));
hfsplus_mark_inode_dirty(inode,
HFSPLUS_I_CAT_DIRTY);
} else {
err = -ERANGE;
goto end_setxattr;
}
} else {
err = -EOPNOTSUPP;
goto end_setxattr;
}
goto end_setxattr;
}
if (!HFSPLUS_SB(inode->i_sb)->attr_tree) {
err = hfsplus_create_attributes_file(inode->i_sb);
if (unlikely(err))
goto end_setxattr;
}
if (hfsplus_attr_exists(inode, name)) {
if (flags & XATTR_CREATE) {
pr_err("xattr exists yet\n");
err = -EOPNOTSUPP;
goto end_setxattr;
}
err = hfsplus_delete_attr(inode, name);
if (err)
goto end_setxattr;
err = hfsplus_create_attr(inode, name, value, size);
if (err)
goto end_setxattr;
} else {
if (flags & XATTR_REPLACE) {
pr_err("cannot replace xattr\n");
err = -EOPNOTSUPP;
goto end_setxattr;
}
err = hfsplus_create_attr(inode, name, value, size);
if (err)
goto end_setxattr;
}
cat_entry_type = hfs_bnode_read_u16(cat_fd.bnode, cat_fd.entryoffset);
if (cat_entry_type == HFSPLUS_FOLDER) {
cat_entry_flags = hfs_bnode_read_u16(cat_fd.bnode,
cat_fd.entryoffset +
offsetof(struct hfsplus_cat_folder, flags));
cat_entry_flags |= HFSPLUS_XATTR_EXISTS;
if (!strcmp_xattr_acl(name))
cat_entry_flags |= HFSPLUS_ACL_EXISTS;
hfs_bnode_write_u16(cat_fd.bnode, cat_fd.entryoffset +
offsetof(struct hfsplus_cat_folder, flags),
cat_entry_flags);
hfsplus_mark_inode_dirty(inode, HFSPLUS_I_CAT_DIRTY);
} else if (cat_entry_type == HFSPLUS_FILE) {
cat_entry_flags = hfs_bnode_read_u16(cat_fd.bnode,
cat_fd.entryoffset +
offsetof(struct hfsplus_cat_file, flags));
cat_entry_flags |= HFSPLUS_XATTR_EXISTS;
if (!strcmp_xattr_acl(name))
cat_entry_flags |= HFSPLUS_ACL_EXISTS;
hfs_bnode_write_u16(cat_fd.bnode, cat_fd.entryoffset +
offsetof(struct hfsplus_cat_file, flags),
cat_entry_flags);
hfsplus_mark_inode_dirty(inode, HFSPLUS_I_CAT_DIRTY);
} else {
pr_err("invalid catalog entry type\n");
err = -EIO;
goto end_setxattr;
}
end_setxattr:
hfs_find_exit(&cat_fd);
return err;
}
static int name_len(const char *xattr_name, int xattr_name_len)
{
int len = xattr_name_len + 1;
if (!is_known_namespace(xattr_name))
len += XATTR_MAC_OSX_PREFIX_LEN;
return len;
}
static int copy_name(char *buffer, const char *xattr_name, int name_len)
{
int len = name_len;
int offset = 0;
if (!is_known_namespace(xattr_name)) {
memcpy(buffer, XATTR_MAC_OSX_PREFIX, XATTR_MAC_OSX_PREFIX_LEN);
offset += XATTR_MAC_OSX_PREFIX_LEN;
len += XATTR_MAC_OSX_PREFIX_LEN;
}
strncpy(buffer + offset, xattr_name, name_len);
memset(buffer + offset + name_len, 0, 1);
len += 1;
return len;
}
int hfsplus_setxattr(struct inode *inode, const char *name,
const void *value, size_t size, int flags,
const char *prefix, size_t prefixlen)
{
char *xattr_name;
int res;
xattr_name = kmalloc(NLS_MAX_CHARSET_SIZE * HFSPLUS_ATTR_MAX_STRLEN + 1,
GFP_KERNEL);
if (!xattr_name)
return -ENOMEM;
strcpy(xattr_name, prefix);
strcpy(xattr_name + prefixlen, name);
res = __hfsplus_setxattr(inode, xattr_name, value, size, flags);
kfree(xattr_name);
return res;
}
static ssize_t hfsplus_getxattr_finder_info(struct inode *inode,
void *value, size_t size)
{
ssize_t res = 0;
struct hfs_find_data fd;
u16 entry_type;
u16 folder_rec_len = sizeof(struct DInfo) + sizeof(struct DXInfo);
u16 file_rec_len = sizeof(struct FInfo) + sizeof(struct FXInfo);
u16 record_len = max(folder_rec_len, file_rec_len);
u8 folder_finder_info[sizeof(struct DInfo) + sizeof(struct DXInfo)];
u8 file_finder_info[sizeof(struct FInfo) + sizeof(struct FXInfo)];
if (size >= record_len) {
res = hfs_find_init(HFSPLUS_SB(inode->i_sb)->cat_tree, &fd);
if (res) {
pr_err("can't init xattr find struct\n");
return res;
}
res = hfsplus_find_cat(inode->i_sb, inode->i_ino, &fd);
if (res)
goto end_getxattr_finder_info;
entry_type = hfs_bnode_read_u16(fd.bnode, fd.entryoffset);
if (entry_type == HFSPLUS_FOLDER) {
hfs_bnode_read(fd.bnode, folder_finder_info,
fd.entryoffset +
offsetof(struct hfsplus_cat_folder, user_info),
folder_rec_len);
memcpy(value, folder_finder_info, folder_rec_len);
res = folder_rec_len;
} else if (entry_type == HFSPLUS_FILE) {
hfs_bnode_read(fd.bnode, file_finder_info,
fd.entryoffset +
offsetof(struct hfsplus_cat_file, user_info),
file_rec_len);
memcpy(value, file_finder_info, file_rec_len);
res = file_rec_len;
} else {
res = -EOPNOTSUPP;
goto end_getxattr_finder_info;
}
} else
res = size ? -ERANGE : record_len;
end_getxattr_finder_info:
if (size >= record_len)
hfs_find_exit(&fd);
return res;
}
ssize_t __hfsplus_getxattr(struct inode *inode, const char *name,
void *value, size_t size)
{
struct hfs_find_data fd;
hfsplus_attr_entry *entry;
__be32 xattr_record_type;
u32 record_type;
u16 record_length = 0;
ssize_t res;
if ((!S_ISREG(inode->i_mode) &&
!S_ISDIR(inode->i_mode)) ||
HFSPLUS_IS_RSRC(inode))
return -EOPNOTSUPP;
if (!strcmp_xattr_finder_info(name))
return hfsplus_getxattr_finder_info(inode, value, size);
if (!HFSPLUS_SB(inode->i_sb)->attr_tree)
return -EOPNOTSUPP;
entry = hfsplus_alloc_attr_entry();
if (!entry) {
pr_err("can't allocate xattr entry\n");
return -ENOMEM;
}
res = hfs_find_init(HFSPLUS_SB(inode->i_sb)->attr_tree, &fd);
if (res) {
pr_err("can't init xattr find struct\n");
goto failed_getxattr_init;
}
res = hfsplus_find_attr(inode->i_sb, inode->i_ino, name, &fd);
if (res) {
if (res == -ENOENT)
res = -ENODATA;
else
pr_err("xattr searching failed\n");
goto out;
}
hfs_bnode_read(fd.bnode, &xattr_record_type,
fd.entryoffset, sizeof(xattr_record_type));
record_type = be32_to_cpu(xattr_record_type);
if (record_type == HFSPLUS_ATTR_INLINE_DATA) {
record_length = hfs_bnode_read_u16(fd.bnode,
fd.entryoffset +
offsetof(struct hfsplus_attr_inline_data,
length));
if (record_length > HFSPLUS_MAX_INLINE_DATA_SIZE) {
pr_err("invalid xattr record size\n");
res = -EIO;
goto out;
}
} else if (record_type == HFSPLUS_ATTR_FORK_DATA ||
record_type == HFSPLUS_ATTR_EXTENTS) {
pr_err("only inline data xattr are supported\n");
res = -EOPNOTSUPP;
goto out;
} else {
pr_err("invalid xattr record\n");
res = -EIO;
goto out;
}
if (size) {
hfs_bnode_read(fd.bnode, entry, fd.entryoffset,
offsetof(struct hfsplus_attr_inline_data,
raw_bytes) + record_length);
}
if (size >= record_length) {
memcpy(value, entry->inline_data.raw_bytes, record_length);
res = record_length;
} else
res = size ? -ERANGE : record_length;
out:
hfs_find_exit(&fd);
failed_getxattr_init:
hfsplus_destroy_attr_entry(entry);
return res;
}
ssize_t hfsplus_getxattr(struct inode *inode, const char *name,
void *value, size_t size,
const char *prefix, size_t prefixlen)
{
int res;
char *xattr_name;
xattr_name = kmalloc(NLS_MAX_CHARSET_SIZE * HFSPLUS_ATTR_MAX_STRLEN + 1,
GFP_KERNEL);
if (!xattr_name)
return -ENOMEM;
strcpy(xattr_name, prefix);
strcpy(xattr_name + prefixlen, name);
res = __hfsplus_getxattr(inode, xattr_name, value, size);
kfree(xattr_name);
return res;
}
static inline int can_list(const char *xattr_name)
{
if (!xattr_name)
return 0;
return strncmp(xattr_name, XATTR_TRUSTED_PREFIX,
XATTR_TRUSTED_PREFIX_LEN) ||
capable(CAP_SYS_ADMIN);
}
static ssize_t hfsplus_listxattr_finder_info(struct dentry *dentry,
char *buffer, size_t size)
{
ssize_t res;
struct inode *inode = d_inode(dentry);
struct hfs_find_data fd;
u16 entry_type;
u8 folder_finder_info[sizeof(struct DInfo) + sizeof(struct DXInfo)];
u8 file_finder_info[sizeof(struct FInfo) + sizeof(struct FXInfo)];
unsigned long len, found_bit;
int xattr_name_len, symbols_count;
res = hfs_find_init(HFSPLUS_SB(inode->i_sb)->cat_tree, &fd);
if (res) {
pr_err("can't init xattr find struct\n");
return res;
}
res = hfsplus_find_cat(inode->i_sb, inode->i_ino, &fd);
if (res)
goto end_listxattr_finder_info;
entry_type = hfs_bnode_read_u16(fd.bnode, fd.entryoffset);
if (entry_type == HFSPLUS_FOLDER) {
len = sizeof(struct DInfo) + sizeof(struct DXInfo);
hfs_bnode_read(fd.bnode, folder_finder_info,
fd.entryoffset +
offsetof(struct hfsplus_cat_folder, user_info),
len);
found_bit = find_first_bit((void *)folder_finder_info, len*8);
} else if (entry_type == HFSPLUS_FILE) {
len = sizeof(struct FInfo) + sizeof(struct FXInfo);
hfs_bnode_read(fd.bnode, file_finder_info,
fd.entryoffset +
offsetof(struct hfsplus_cat_file, user_info),
len);
found_bit = find_first_bit((void *)file_finder_info, len*8);
} else {
res = -EOPNOTSUPP;
goto end_listxattr_finder_info;
}
if (found_bit >= (len*8))
res = 0;
else {
symbols_count = sizeof(HFSPLUS_XATTR_FINDER_INFO_NAME) - 1;
xattr_name_len =
name_len(HFSPLUS_XATTR_FINDER_INFO_NAME, symbols_count);
if (!buffer || !size) {
if (can_list(HFSPLUS_XATTR_FINDER_INFO_NAME))
res = xattr_name_len;
} else if (can_list(HFSPLUS_XATTR_FINDER_INFO_NAME)) {
if (size < xattr_name_len)
res = -ERANGE;
else {
res = copy_name(buffer,
HFSPLUS_XATTR_FINDER_INFO_NAME,
symbols_count);
}
}
}
end_listxattr_finder_info:
hfs_find_exit(&fd);
return res;
}
ssize_t hfsplus_listxattr(struct dentry *dentry, char *buffer, size_t size)
{
ssize_t err;
ssize_t res;
struct inode *inode = d_inode(dentry);
struct hfs_find_data fd;
struct hfsplus_attr_key attr_key;
hfsplus: fix worst-case unicode to char conversion of file names and attributes This is a series of 3 patches which corrects issues in HFS+ concerning the use of non-english file names and attributes. Names and attributes are stored internally as UTF-16 units up to a fixed maximum size, and convert to and from user-representation by NLS. The code incorrectly assume that NLS string lengths are equal to unicode lengths, which is only true for English ascii usage. This patch (of 3): The HFS Plus Volume Format specification (TN1150) states that file names are stored internally as a maximum of 255 unicode characters, as defined by The Unicode Standard, Version 2.0 [Unicode, Inc. ISBN 0-201-48345-9]. File names are converted by the NLS system on Linux before presented to the user. 255 CJK characters converts to UTF-8 with 1 unicode character to up to 3 bytes, and to GB18030 with 1 unicode character to up to 4 bytes. Thus, trying in a UTF-8 locale to list files with names of more than 85 CJK characters results in: $ ls /mnt ls: reading directory /mnt: File name too long The receiving buffer to hfsplus_uni2asc() needs to be 255 x NLS_MAX_CHARSET_SIZE bytes, not 255 bytes as the code has always been. Similar consideration applies to attributes, which are stored internally as a maximum of 127 UTF-16BE units. See XNU source for an up-to-date reference on attributes. Strictly speaking, the maximum value of NLS_MAX_CHARSET_SIZE = 6 is not attainable in the case of conversion to UTF-8, as going beyond 3 bytes requires the use of surrogate pairs, i.e. consuming two input units. Thanks Anton Altaparmakov for reviewing an earlier version of this change. This patch fixes all callers of hfsplus_uni2asc(), and also enables the use of long non-English file names in HFS+. The getting and setting, and general usage of long non-English attributes requires further forthcoming work, in the following patches of this series. [akpm@linux-foundation.org: fix build] Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Reviewed-by: Anton Altaparmakov <anton@tuxera.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Sougata Santra <sougata@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 05:36:21 +08:00
char *strbuf;
int xattr_name_len;
if ((!S_ISREG(inode->i_mode) &&
!S_ISDIR(inode->i_mode)) ||
HFSPLUS_IS_RSRC(inode))
return -EOPNOTSUPP;
res = hfsplus_listxattr_finder_info(dentry, buffer, size);
if (res < 0)
return res;
else if (!HFSPLUS_SB(inode->i_sb)->attr_tree)
return (res == 0) ? -EOPNOTSUPP : res;
err = hfs_find_init(HFSPLUS_SB(inode->i_sb)->attr_tree, &fd);
if (err) {
pr_err("can't init xattr find struct\n");
return err;
}
hfsplus: fix worst-case unicode to char conversion of file names and attributes This is a series of 3 patches which corrects issues in HFS+ concerning the use of non-english file names and attributes. Names and attributes are stored internally as UTF-16 units up to a fixed maximum size, and convert to and from user-representation by NLS. The code incorrectly assume that NLS string lengths are equal to unicode lengths, which is only true for English ascii usage. This patch (of 3): The HFS Plus Volume Format specification (TN1150) states that file names are stored internally as a maximum of 255 unicode characters, as defined by The Unicode Standard, Version 2.0 [Unicode, Inc. ISBN 0-201-48345-9]. File names are converted by the NLS system on Linux before presented to the user. 255 CJK characters converts to UTF-8 with 1 unicode character to up to 3 bytes, and to GB18030 with 1 unicode character to up to 4 bytes. Thus, trying in a UTF-8 locale to list files with names of more than 85 CJK characters results in: $ ls /mnt ls: reading directory /mnt: File name too long The receiving buffer to hfsplus_uni2asc() needs to be 255 x NLS_MAX_CHARSET_SIZE bytes, not 255 bytes as the code has always been. Similar consideration applies to attributes, which are stored internally as a maximum of 127 UTF-16BE units. See XNU source for an up-to-date reference on attributes. Strictly speaking, the maximum value of NLS_MAX_CHARSET_SIZE = 6 is not attainable in the case of conversion to UTF-8, as going beyond 3 bytes requires the use of surrogate pairs, i.e. consuming two input units. Thanks Anton Altaparmakov for reviewing an earlier version of this change. This patch fixes all callers of hfsplus_uni2asc(), and also enables the use of long non-English file names in HFS+. The getting and setting, and general usage of long non-English attributes requires further forthcoming work, in the following patches of this series. [akpm@linux-foundation.org: fix build] Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Reviewed-by: Anton Altaparmakov <anton@tuxera.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Sougata Santra <sougata@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 05:36:21 +08:00
strbuf = kmalloc(NLS_MAX_CHARSET_SIZE * HFSPLUS_ATTR_MAX_STRLEN +
XATTR_MAC_OSX_PREFIX_LEN + 1, GFP_KERNEL);
if (!strbuf) {
res = -ENOMEM;
goto out;
}
err = hfsplus_find_attr(inode->i_sb, inode->i_ino, NULL, &fd);
if (err) {
if (err == -ENOENT) {
if (res == 0)
res = -ENODATA;
goto end_listxattr;
} else {
res = err;
goto end_listxattr;
}
}
for (;;) {
u16 key_len = hfs_bnode_read_u16(fd.bnode, fd.keyoffset);
if (key_len == 0 || key_len > fd.tree->max_key_len) {
pr_err("invalid xattr key length: %d\n", key_len);
res = -EIO;
goto end_listxattr;
}
hfs_bnode_read(fd.bnode, &attr_key,
fd.keyoffset, key_len + sizeof(key_len));
if (be32_to_cpu(attr_key.cnid) != inode->i_ino)
goto end_listxattr;
hfsplus: fix worst-case unicode to char conversion of file names and attributes This is a series of 3 patches which corrects issues in HFS+ concerning the use of non-english file names and attributes. Names and attributes are stored internally as UTF-16 units up to a fixed maximum size, and convert to and from user-representation by NLS. The code incorrectly assume that NLS string lengths are equal to unicode lengths, which is only true for English ascii usage. This patch (of 3): The HFS Plus Volume Format specification (TN1150) states that file names are stored internally as a maximum of 255 unicode characters, as defined by The Unicode Standard, Version 2.0 [Unicode, Inc. ISBN 0-201-48345-9]. File names are converted by the NLS system on Linux before presented to the user. 255 CJK characters converts to UTF-8 with 1 unicode character to up to 3 bytes, and to GB18030 with 1 unicode character to up to 4 bytes. Thus, trying in a UTF-8 locale to list files with names of more than 85 CJK characters results in: $ ls /mnt ls: reading directory /mnt: File name too long The receiving buffer to hfsplus_uni2asc() needs to be 255 x NLS_MAX_CHARSET_SIZE bytes, not 255 bytes as the code has always been. Similar consideration applies to attributes, which are stored internally as a maximum of 127 UTF-16BE units. See XNU source for an up-to-date reference on attributes. Strictly speaking, the maximum value of NLS_MAX_CHARSET_SIZE = 6 is not attainable in the case of conversion to UTF-8, as going beyond 3 bytes requires the use of surrogate pairs, i.e. consuming two input units. Thanks Anton Altaparmakov for reviewing an earlier version of this change. This patch fixes all callers of hfsplus_uni2asc(), and also enables the use of long non-English file names in HFS+. The getting and setting, and general usage of long non-English attributes requires further forthcoming work, in the following patches of this series. [akpm@linux-foundation.org: fix build] Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Reviewed-by: Anton Altaparmakov <anton@tuxera.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Sougata Santra <sougata@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 05:36:21 +08:00
xattr_name_len = NLS_MAX_CHARSET_SIZE * HFSPLUS_ATTR_MAX_STRLEN;
if (hfsplus_uni2asc(inode->i_sb,
(const struct hfsplus_unistr *)&fd.key->attr.key_name,
strbuf, &xattr_name_len)) {
pr_err("unicode conversion failed\n");
res = -EIO;
goto end_listxattr;
}
if (!buffer || !size) {
if (can_list(strbuf))
res += name_len(strbuf, xattr_name_len);
} else if (can_list(strbuf)) {
if (size < (res + name_len(strbuf, xattr_name_len))) {
res = -ERANGE;
goto end_listxattr;
} else
res += copy_name(buffer + res,
strbuf, xattr_name_len);
}
if (hfs_brec_goto(&fd, 1))
goto end_listxattr;
}
end_listxattr:
hfsplus: fix worst-case unicode to char conversion of file names and attributes This is a series of 3 patches which corrects issues in HFS+ concerning the use of non-english file names and attributes. Names and attributes are stored internally as UTF-16 units up to a fixed maximum size, and convert to and from user-representation by NLS. The code incorrectly assume that NLS string lengths are equal to unicode lengths, which is only true for English ascii usage. This patch (of 3): The HFS Plus Volume Format specification (TN1150) states that file names are stored internally as a maximum of 255 unicode characters, as defined by The Unicode Standard, Version 2.0 [Unicode, Inc. ISBN 0-201-48345-9]. File names are converted by the NLS system on Linux before presented to the user. 255 CJK characters converts to UTF-8 with 1 unicode character to up to 3 bytes, and to GB18030 with 1 unicode character to up to 4 bytes. Thus, trying in a UTF-8 locale to list files with names of more than 85 CJK characters results in: $ ls /mnt ls: reading directory /mnt: File name too long The receiving buffer to hfsplus_uni2asc() needs to be 255 x NLS_MAX_CHARSET_SIZE bytes, not 255 bytes as the code has always been. Similar consideration applies to attributes, which are stored internally as a maximum of 127 UTF-16BE units. See XNU source for an up-to-date reference on attributes. Strictly speaking, the maximum value of NLS_MAX_CHARSET_SIZE = 6 is not attainable in the case of conversion to UTF-8, as going beyond 3 bytes requires the use of surrogate pairs, i.e. consuming two input units. Thanks Anton Altaparmakov for reviewing an earlier version of this change. This patch fixes all callers of hfsplus_uni2asc(), and also enables the use of long non-English file names in HFS+. The getting and setting, and general usage of long non-English attributes requires further forthcoming work, in the following patches of this series. [akpm@linux-foundation.org: fix build] Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Reviewed-by: Anton Altaparmakov <anton@tuxera.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Sougata Santra <sougata@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 05:36:21 +08:00
kfree(strbuf);
out:
hfs_find_exit(&fd);
return res;
}
static int hfsplus_removexattr(struct inode *inode, const char *name)
{
int err;
struct hfs_find_data cat_fd;
u16 flags;
u16 cat_entry_type;
int is_xattr_acl_deleted;
int is_all_xattrs_deleted;
if (!HFSPLUS_SB(inode->i_sb)->attr_tree)
return -EOPNOTSUPP;
if (!strcmp_xattr_finder_info(name))
return -EOPNOTSUPP;
err = hfs_find_init(HFSPLUS_SB(inode->i_sb)->cat_tree, &cat_fd);
if (err) {
pr_err("can't init xattr find struct\n");
return err;
}
err = hfsplus_find_cat(inode->i_sb, inode->i_ino, &cat_fd);
if (err) {
pr_err("catalog searching failed\n");
goto end_removexattr;
}
err = hfsplus_delete_attr(inode, name);
if (err)
goto end_removexattr;
is_xattr_acl_deleted = !strcmp_xattr_acl(name);
is_all_xattrs_deleted = !hfsplus_attr_exists(inode, NULL);
if (!is_xattr_acl_deleted && !is_all_xattrs_deleted)
goto end_removexattr;
cat_entry_type = hfs_bnode_read_u16(cat_fd.bnode, cat_fd.entryoffset);
if (cat_entry_type == HFSPLUS_FOLDER) {
flags = hfs_bnode_read_u16(cat_fd.bnode, cat_fd.entryoffset +
offsetof(struct hfsplus_cat_folder, flags));
if (is_xattr_acl_deleted)
flags &= ~HFSPLUS_ACL_EXISTS;
if (is_all_xattrs_deleted)
flags &= ~HFSPLUS_XATTR_EXISTS;
hfs_bnode_write_u16(cat_fd.bnode, cat_fd.entryoffset +
offsetof(struct hfsplus_cat_folder, flags),
flags);
hfsplus_mark_inode_dirty(inode, HFSPLUS_I_CAT_DIRTY);
} else if (cat_entry_type == HFSPLUS_FILE) {
flags = hfs_bnode_read_u16(cat_fd.bnode, cat_fd.entryoffset +
offsetof(struct hfsplus_cat_file, flags));
if (is_xattr_acl_deleted)
flags &= ~HFSPLUS_ACL_EXISTS;
if (is_all_xattrs_deleted)
flags &= ~HFSPLUS_XATTR_EXISTS;
hfs_bnode_write_u16(cat_fd.bnode, cat_fd.entryoffset +
offsetof(struct hfsplus_cat_file, flags),
flags);
hfsplus_mark_inode_dirty(inode, HFSPLUS_I_CAT_DIRTY);
} else {
pr_err("invalid catalog entry type\n");
err = -EIO;
goto end_removexattr;
}
end_removexattr:
hfs_find_exit(&cat_fd);
return err;
}
static int hfsplus_osx_getxattr(const struct xattr_handler *handler,
struct dentry *unused, struct inode *inode,
const char *name, void *buffer, size_t size)
{
/*
* Don't allow retrieving properly prefixed attributes
* by prepending them with "osx."
*/
if (is_known_namespace(name))
return -EOPNOTSUPP;
hfsplus: don't store special "osx" xattr prefix on-disk On Mac OS X, HFS+ extended attributes are not namespaced. Since we want to be compatible with OS X filesystems and yet still support the Linux namespacing system, the hfsplus driver implements a special "osx" namespace that is reported for any attribute that is not namespaced on-disk. However, the current code for getting and setting these unprefixed attributes is broken. hfsplus_osx_setattr() and hfsplus_osx_getattr() are passed names that have already had their "osx." prefixes stripped by the generic functions. The functions first, quite correctly, check those names to make sure that they aren't prefixed with a known namespace, which would allow namespace access restrictions to be bypassed. However, the functions then prepend "osx." to the name they're given before passing it on to hfsplus_getattr() and hfsplus_setattr(). Not only does this cause the "osx." prefix to be stored on-disk, defeating its purpose, it also breaks the check for the special "com.apple.FinderInfo" attribute, which is reported for all files, and as a consequence makes some userspace applications (e.g. GNU patch) fail even when extended attributes are not otherwise in use. There are five commits which have touched this particular code: 127e5f5ae51e ("hfsplus: rework functionality of getting, setting and deleting of extended attributes") b168fff72109 ("hfsplus: use xattr handlers for removexattr") bf29e886b242 ("hfsplus: correct usage of HFSPLUS_ATTR_MAX_STRLEN for non-English attributes") fcacbd95e121 ("fs/hfsplus: move xattr_name allocation in hfsplus_getxattr()") ec1bbd346f18 ("fs/hfsplus: move xattr_name allocation in hfsplus_setxattr()") The first commit creates the functions to begin with. The namespace is prepended by the original code, which I believe was correct at the time, since hfsplus_?etattr() stripped the prefix if found. The second commit removes this behavior from hfsplus_?etattr() and appears to have been intended to also remove the prefixing from hfsplus_osx_?etattr(). However, what it actually does is remove a necessary strncpy() call completely, breaking the osx namespace entirely. The third commit re-adds the strncpy() call as it was originally, but doesn't mention it in its commit message. The final two commits refactor the code and don't affect its functionality. This commit does what b168fff attempted to do (prevent the prefix from being added), but does it properly, instead of passing in an empty buffer (which is what b168fff actually did). Fixes: b168fff72109 ("hfsplus: use xattr handlers for removexattr") Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Sergei Antonov <saproj@gmail.com> Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Christian Kujau <lists@nerdbynature.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 03:47:18 +08:00
/*
* osx is the namespace we use to indicate an unprefixed
* attribute on the filesystem (like the ones that OS X
* creates), so we pass the name through unmodified (after
* ensuring it doesn't conflict with another namespace).
*/
return __hfsplus_getxattr(inode, name, buffer, size);
}
static int hfsplus_osx_setxattr(const struct xattr_handler *handler,
struct mnt_idmap *idmap,
struct dentry *unused, struct inode *inode,
const char *name, const void *buffer,
size_t size, int flags)
{
/*
* Don't allow setting properly prefixed attributes
* by prepending them with "osx."
*/
if (is_known_namespace(name))
return -EOPNOTSUPP;
hfsplus: don't store special "osx" xattr prefix on-disk On Mac OS X, HFS+ extended attributes are not namespaced. Since we want to be compatible with OS X filesystems and yet still support the Linux namespacing system, the hfsplus driver implements a special "osx" namespace that is reported for any attribute that is not namespaced on-disk. However, the current code for getting and setting these unprefixed attributes is broken. hfsplus_osx_setattr() and hfsplus_osx_getattr() are passed names that have already had their "osx." prefixes stripped by the generic functions. The functions first, quite correctly, check those names to make sure that they aren't prefixed with a known namespace, which would allow namespace access restrictions to be bypassed. However, the functions then prepend "osx." to the name they're given before passing it on to hfsplus_getattr() and hfsplus_setattr(). Not only does this cause the "osx." prefix to be stored on-disk, defeating its purpose, it also breaks the check for the special "com.apple.FinderInfo" attribute, which is reported for all files, and as a consequence makes some userspace applications (e.g. GNU patch) fail even when extended attributes are not otherwise in use. There are five commits which have touched this particular code: 127e5f5ae51e ("hfsplus: rework functionality of getting, setting and deleting of extended attributes") b168fff72109 ("hfsplus: use xattr handlers for removexattr") bf29e886b242 ("hfsplus: correct usage of HFSPLUS_ATTR_MAX_STRLEN for non-English attributes") fcacbd95e121 ("fs/hfsplus: move xattr_name allocation in hfsplus_getxattr()") ec1bbd346f18 ("fs/hfsplus: move xattr_name allocation in hfsplus_setxattr()") The first commit creates the functions to begin with. The namespace is prepended by the original code, which I believe was correct at the time, since hfsplus_?etattr() stripped the prefix if found. The second commit removes this behavior from hfsplus_?etattr() and appears to have been intended to also remove the prefixing from hfsplus_osx_?etattr(). However, what it actually does is remove a necessary strncpy() call completely, breaking the osx namespace entirely. The third commit re-adds the strncpy() call as it was originally, but doesn't mention it in its commit message. The final two commits refactor the code and don't affect its functionality. This commit does what b168fff attempted to do (prevent the prefix from being added), but does it properly, instead of passing in an empty buffer (which is what b168fff actually did). Fixes: b168fff72109 ("hfsplus: use xattr handlers for removexattr") Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Sergei Antonov <saproj@gmail.com> Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Christian Kujau <lists@nerdbynature.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 03:47:18 +08:00
/*
* osx is the namespace we use to indicate an unprefixed
* attribute on the filesystem (like the ones that OS X
* creates), so we pass the name through unmodified (after
* ensuring it doesn't conflict with another namespace).
*/
return __hfsplus_setxattr(inode, name, buffer, size, flags);
}
const struct xattr_handler hfsplus_xattr_osx_handler = {
.prefix = XATTR_MAC_OSX_PREFIX,
.get = hfsplus_osx_getxattr,
.set = hfsplus_osx_setxattr,
};