OpenCloudOS-Kernel/drivers/mfd/rsmu_i2c.c

202 lines
4.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* I2C driver for Renesas Synchronization Management Unit (SMU) devices.
*
* Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
*/
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mfd/core.h>
#include <linux/mfd/rsmu.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include "rsmu.h"
/*
* 16-bit register address: the lower 8 bits of the register address come
* from the offset addr byte and the upper 8 bits come from the page register.
*/
#define RSMU_CM_PAGE_ADDR 0xFD
#define RSMU_CM_PAGE_WINDOW 256
/*
* 15-bit register address: the lower 7 bits of the register address come
* from the offset addr byte and the upper 8 bits come from the page register.
*/
#define RSMU_SABRE_PAGE_ADDR 0x7F
#define RSMU_SABRE_PAGE_WINDOW 128
static const struct regmap_range_cfg rsmu_cm_range_cfg[] = {
{
.range_min = 0,
.range_max = 0xD000,
.selector_reg = RSMU_CM_PAGE_ADDR,
.selector_mask = 0xFF,
.selector_shift = 0,
.window_start = 0,
.window_len = RSMU_CM_PAGE_WINDOW,
}
};
static const struct regmap_range_cfg rsmu_sabre_range_cfg[] = {
{
.range_min = 0,
.range_max = 0x400,
.selector_reg = RSMU_SABRE_PAGE_ADDR,
.selector_mask = 0xFF,
.selector_shift = 0,
.window_start = 0,
.window_len = RSMU_SABRE_PAGE_WINDOW,
}
};
static bool rsmu_cm_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case RSMU_CM_PAGE_ADDR:
return false;
default:
return true;
}
}
static bool rsmu_sabre_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case RSMU_SABRE_PAGE_ADDR:
return false;
default:
return true;
}
}
static const struct regmap_config rsmu_cm_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xD000,
.ranges = rsmu_cm_range_cfg,
.num_ranges = ARRAY_SIZE(rsmu_cm_range_cfg),
.volatile_reg = rsmu_cm_volatile_reg,
.cache_type = REGCACHE_RBTREE,
.can_multi_write = true,
};
static const struct regmap_config rsmu_sabre_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0x400,
.ranges = rsmu_sabre_range_cfg,
.num_ranges = ARRAY_SIZE(rsmu_sabre_range_cfg),
.volatile_reg = rsmu_sabre_volatile_reg,
.cache_type = REGCACHE_RBTREE,
.can_multi_write = true,
};
static const struct regmap_config rsmu_sl_regmap_config = {
.reg_bits = 16,
.val_bits = 8,
.reg_format_endian = REGMAP_ENDIAN_BIG,
.max_register = 0x339,
.cache_type = REGCACHE_NONE,
.can_multi_write = true,
};
static int rsmu_i2c_probe(struct i2c_client *client)
{
const struct i2c_device_id *id = i2c_client_get_device_id(client);
const struct regmap_config *cfg;
struct rsmu_ddata *rsmu;
int ret;
rsmu = devm_kzalloc(&client->dev, sizeof(*rsmu), GFP_KERNEL);
if (!rsmu)
return -ENOMEM;
i2c_set_clientdata(client, rsmu);
rsmu->dev = &client->dev;
rsmu->type = (enum rsmu_type)id->driver_data;
switch (rsmu->type) {
case RSMU_CM:
cfg = &rsmu_cm_regmap_config;
break;
case RSMU_SABRE:
cfg = &rsmu_sabre_regmap_config;
break;
case RSMU_SL:
cfg = &rsmu_sl_regmap_config;
break;
default:
dev_err(rsmu->dev, "Unsupported RSMU device type: %d\n", rsmu->type);
return -ENODEV;
}
rsmu->regmap = devm_regmap_init_i2c(client, cfg);
if (IS_ERR(rsmu->regmap)) {
ret = PTR_ERR(rsmu->regmap);
dev_err(rsmu->dev, "Failed to allocate register map: %d\n", ret);
return ret;
}
return rsmu_core_init(rsmu);
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 16:02:30 +08:00
static void rsmu_i2c_remove(struct i2c_client *client)
{
struct rsmu_ddata *rsmu = i2c_get_clientdata(client);
rsmu_core_exit(rsmu);
}
static const struct i2c_device_id rsmu_i2c_id[] = {
{ "8a34000", RSMU_CM },
{ "8a34001", RSMU_CM },
{ "82p33810", RSMU_SABRE },
{ "82p33811", RSMU_SABRE },
{ "8v19n850", RSMU_SL },
{ "8v19n851", RSMU_SL },
{}
};
MODULE_DEVICE_TABLE(i2c, rsmu_i2c_id);
static const struct of_device_id rsmu_i2c_of_match[] = {
{ .compatible = "idt,8a34000", .data = (void *)RSMU_CM },
{ .compatible = "idt,8a34001", .data = (void *)RSMU_CM },
{ .compatible = "idt,82p33810", .data = (void *)RSMU_SABRE },
{ .compatible = "idt,82p33811", .data = (void *)RSMU_SABRE },
{ .compatible = "idt,8v19n850", .data = (void *)RSMU_SL },
{ .compatible = "idt,8v19n851", .data = (void *)RSMU_SL },
{}
};
MODULE_DEVICE_TABLE(of, rsmu_i2c_of_match);
static struct i2c_driver rsmu_i2c_driver = {
.driver = {
.name = "rsmu-i2c",
.of_match_table = of_match_ptr(rsmu_i2c_of_match),
},
.probe_new = rsmu_i2c_probe,
.remove = rsmu_i2c_remove,
.id_table = rsmu_i2c_id,
};
static int __init rsmu_i2c_init(void)
{
return i2c_add_driver(&rsmu_i2c_driver);
}
subsys_initcall(rsmu_i2c_init);
static void __exit rsmu_i2c_exit(void)
{
i2c_del_driver(&rsmu_i2c_driver);
}
module_exit(rsmu_i2c_exit);
MODULE_DESCRIPTION("Renesas SMU I2C driver");
MODULE_LICENSE("GPL");