OpenCloudOS-Kernel/drivers/block/loop.c

2293 lines
58 KiB
C
Raw Normal View History

/*
* linux/drivers/block/loop.c
*
* Written by Theodore Ts'o, 3/29/93
*
* Copyright 1993 by Theodore Ts'o. Redistribution of this file is
* permitted under the GNU General Public License.
*
* DES encryption plus some minor changes by Werner Almesberger, 30-MAY-1993
* more DES encryption plus IDEA encryption by Nicholas J. Leon, June 20, 1996
*
* Modularized and updated for 1.1.16 kernel - Mitch Dsouza 28th May 1994
* Adapted for 1.3.59 kernel - Andries Brouwer, 1 Feb 1996
*
* Fixed do_loop_request() re-entrancy - Vincent.Renardias@waw.com Mar 20, 1997
*
* Added devfs support - Richard Gooch <rgooch@atnf.csiro.au> 16-Jan-1998
*
* Handle sparse backing files correctly - Kenn Humborg, Jun 28, 1998
*
* Loadable modules and other fixes by AK, 1998
*
* Make real block number available to downstream transfer functions, enables
* CBC (and relatives) mode encryption requiring unique IVs per data block.
* Reed H. Petty, rhp@draper.net
*
* Maximum number of loop devices now dynamic via max_loop module parameter.
* Russell Kroll <rkroll@exploits.org> 19990701
*
* Maximum number of loop devices when compiled-in now selectable by passing
* max_loop=<1-255> to the kernel on boot.
* Erik I. Bolsø, <eriki@himolde.no>, Oct 31, 1999
*
* Completely rewrite request handling to be make_request_fn style and
* non blocking, pushing work to a helper thread. Lots of fixes from
* Al Viro too.
* Jens Axboe <axboe@suse.de>, Nov 2000
*
* Support up to 256 loop devices
* Heinz Mauelshagen <mge@sistina.com>, Feb 2002
*
* Support for falling back on the write file operation when the address space
* operations write_begin is not available on the backing filesystem.
* Anton Altaparmakov, 16 Feb 2005
*
* Still To Fix:
* - Advisory locking is ignored here.
* - Should use an own CAP_* category instead of CAP_SYS_ADMIN
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/stat.h>
#include <linux/errno.h>
#include <linux/major.h>
#include <linux/wait.h>
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/init.h>
#include <linux/swap.h>
#include <linux/slab.h>
#include <linux/compat.h>
#include <linux/suspend.h>
#include <linux/freezer.h>
#include <linux/mutex.h>
#include <linux/writeback.h>
#include <linux/completion.h>
#include <linux/highmem.h>
#include <linux/splice.h>
#include <linux/sysfs.h>
loop: add management interface for on-demand device allocation Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-01 04:08:04 +08:00
#include <linux/miscdevice.h>
#include <linux/falloc.h>
#include <linux/uio.h>
#include <linux/ioprio.h>
#include <linux/blk-cgroup.h>
#include <linux/sched/mm.h>
#include "loop.h"
#include <linux/uaccess.h>
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
#define LOOP_IDLE_WORKER_TIMEOUT (60 * HZ)
static DEFINE_IDR(loop_index_idr);
static DEFINE_MUTEX(loop_ctl_mutex);
static DEFINE_MUTEX(loop_validate_mutex);
/**
* loop_global_lock_killable() - take locks for safe loop_validate_file() test
*
* @lo: struct loop_device
* @global: true if @lo is about to bind another "struct loop_device", false otherwise
*
* Returns 0 on success, -EINTR otherwise.
*
* Since loop_validate_file() traverses on other "struct loop_device" if
* is_loop_device() is true, we need a global lock for serializing concurrent
* loop_configure()/loop_change_fd()/__loop_clr_fd() calls.
*/
static int loop_global_lock_killable(struct loop_device *lo, bool global)
{
int err;
if (global) {
err = mutex_lock_killable(&loop_validate_mutex);
if (err)
return err;
}
err = mutex_lock_killable(&lo->lo_mutex);
if (err && global)
mutex_unlock(&loop_validate_mutex);
return err;
}
/**
* loop_global_unlock() - release locks taken by loop_global_lock_killable()
*
* @lo: struct loop_device
* @global: true if @lo was about to bind another "struct loop_device", false otherwise
*/
static void loop_global_unlock(struct loop_device *lo, bool global)
{
mutex_unlock(&lo->lo_mutex);
if (global)
mutex_unlock(&loop_validate_mutex);
}
loop: manage partitions in disk image This patch allows to use loop device with partitionned disk image. Original behavior of loop is not modified. A new parameter is introduced to define how many partition we want to be able to manage per loop device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: # modprobe loop max_part=63 # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 And to attach a raw partitionned disk image, the original losetup is used: # losetup -f etch.img # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 1 2008-03-05 14:57 /dev/loop0p1 brw-rw---- 1 root disk 7, 2 2008-03-05 14:57 /dev/loop0p2 brw-rw---- 1 root disk 7, 5 2008-03-05 14:57 /dev/loop0p5 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 # mount /dev/loop0p1 /mnt # ls /mnt bench cdrom home lib mnt root srv usr bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz # umount /mnt # losetup -d /dev/loop0 Of course, the same behavior can be done using kpartx on a loop device, but modifying loop avoids to stack several layers of block device (loop + device mapper), this is a very light modification (40% of modifications are to manage the new parameter). Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-26 19:11:53 +08:00
static int max_part;
static int part_shift;
static loff_t get_size(loff_t offset, loff_t sizelimit, struct file *file)
{
loff_t loopsize;
/* Compute loopsize in bytes */
loopsize = i_size_read(file->f_mapping->host);
if (offset > 0)
loopsize -= offset;
/* offset is beyond i_size, weird but possible */
if (loopsize < 0)
return 0;
if (sizelimit > 0 && sizelimit < loopsize)
loopsize = sizelimit;
/*
* Unfortunately, if we want to do I/O on the device,
* the number of 512-byte sectors has to fit into a sector_t.
*/
return loopsize >> 9;
}
static loff_t get_loop_size(struct loop_device *lo, struct file *file)
{
return get_size(lo->lo_offset, lo->lo_sizelimit, file);
}
static void __loop_update_dio(struct loop_device *lo, bool dio)
{
struct file *file = lo->lo_backing_file;
struct address_space *mapping = file->f_mapping;
struct inode *inode = mapping->host;
unsigned short sb_bsize = 0;
unsigned dio_align = 0;
bool use_dio;
if (inode->i_sb->s_bdev) {
sb_bsize = bdev_logical_block_size(inode->i_sb->s_bdev);
dio_align = sb_bsize - 1;
}
/*
* We support direct I/O only if lo_offset is aligned with the
* logical I/O size of backing device, and the logical block
* size of loop is bigger than the backing device's.
*
* TODO: the above condition may be loosed in the future, and
* direct I/O may be switched runtime at that time because most
* of requests in sane applications should be PAGE_SIZE aligned
*/
if (dio) {
if (queue_logical_block_size(lo->lo_queue) >= sb_bsize &&
!(lo->lo_offset & dio_align) &&
mapping->a_ops->direct_IO)
use_dio = true;
else
use_dio = false;
} else {
use_dio = false;
}
if (lo->use_dio == use_dio)
return;
/* flush dirty pages before changing direct IO */
vfs_fsync(file, 0);
/*
* The flag of LO_FLAGS_DIRECT_IO is handled similarly with
* LO_FLAGS_READ_ONLY, both are set from kernel, and losetup
* will get updated by ioctl(LOOP_GET_STATUS)
*/
if (lo->lo_state == Lo_bound)
blk_mq_freeze_queue(lo->lo_queue);
lo->use_dio = use_dio;
if (use_dio) {
blk_queue_flag_clear(QUEUE_FLAG_NOMERGES, lo->lo_queue);
lo->lo_flags |= LO_FLAGS_DIRECT_IO;
} else {
blk_queue_flag_set(QUEUE_FLAG_NOMERGES, lo->lo_queue);
lo->lo_flags &= ~LO_FLAGS_DIRECT_IO;
}
if (lo->lo_state == Lo_bound)
blk_mq_unfreeze_queue(lo->lo_queue);
}
/**
* loop_set_size() - sets device size and notifies userspace
* @lo: struct loop_device to set the size for
* @size: new size of the loop device
*
* Callers must validate that the size passed into this function fits into
* a sector_t, eg using loop_validate_size()
*/
static void loop_set_size(struct loop_device *lo, loff_t size)
{
if (!set_capacity_and_notify(lo->lo_disk, size))
kobject_uevent(&disk_to_dev(lo->lo_disk)->kobj, KOBJ_CHANGE);
}
static int lo_write_bvec(struct file *file, struct bio_vec *bvec, loff_t *ppos)
{
struct iov_iter i;
ssize_t bw;
iov_iter_bvec(&i, WRITE, bvec, 1, bvec->bv_len);
file_start_write(file);
bw = vfs_iter_write(file, &i, ppos, 0);
file_end_write(file);
if (likely(bw == bvec->bv_len))
return 0;
printk_ratelimited(KERN_ERR
"loop: Write error at byte offset %llu, length %i.\n",
(unsigned long long)*ppos, bvec->bv_len);
if (bw >= 0)
bw = -EIO;
return bw;
}
static int lo_write_simple(struct loop_device *lo, struct request *rq,
loff_t pos)
{
struct bio_vec bvec;
struct req_iterator iter;
int ret = 0;
rq_for_each_segment(bvec, rq, iter) {
ret = lo_write_bvec(lo->lo_backing_file, &bvec, &pos);
if (ret < 0)
break;
cond_resched();
}
return ret;
}
static int lo_read_simple(struct loop_device *lo, struct request *rq,
loff_t pos)
{
struct bio_vec bvec;
struct req_iterator iter;
struct iov_iter i;
ssize_t len;
rq_for_each_segment(bvec, rq, iter) {
iov_iter_bvec(&i, READ, &bvec, 1, bvec.bv_len);
len = vfs_iter_read(lo->lo_backing_file, &i, &pos, 0);
if (len < 0)
return len;
flush_dcache_page(bvec.bv_page);
if (len != bvec.bv_len) {
struct bio *bio;
__rq_for_each_bio(bio, rq)
zero_fill_bio(bio);
break;
}
cond_resched();
}
return 0;
}
static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,
int mode)
{
/*
* We use fallocate to manipulate the space mappings used by the image
* a.k.a. discard/zerorange.
*/
struct file *file = lo->lo_backing_file;
struct request_queue *q = lo->lo_queue;
int ret;
mode |= FALLOC_FL_KEEP_SIZE;
if (!blk_queue_discard(q)) {
ret = -EOPNOTSUPP;
goto out;
}
ret = file->f_op->fallocate(file, mode, pos, blk_rq_bytes(rq));
if (unlikely(ret && ret != -EINVAL && ret != -EOPNOTSUPP))
ret = -EIO;
out:
return ret;
}
static int lo_req_flush(struct loop_device *lo, struct request *rq)
{
struct file *file = lo->lo_backing_file;
int ret = vfs_fsync(file, 0);
if (unlikely(ret && ret != -EINVAL))
ret = -EIO;
return ret;
}
static void lo_complete_rq(struct request *rq)
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
{
struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq);
blk_status_t ret = BLK_STS_OK;
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
if (!cmd->use_aio || cmd->ret < 0 || cmd->ret == blk_rq_bytes(rq) ||
req_op(rq) != REQ_OP_READ) {
if (cmd->ret < 0)
ret = errno_to_blk_status(cmd->ret);
goto end_io;
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
}
/*
* Short READ - if we got some data, advance our request and
* retry it. If we got no data, end the rest with EIO.
*/
if (cmd->ret) {
blk_update_request(rq, BLK_STS_OK, cmd->ret);
cmd->ret = 0;
blk_mq_requeue_request(rq, true);
} else {
if (cmd->use_aio) {
struct bio *bio = rq->bio;
while (bio) {
zero_fill_bio(bio);
bio = bio->bi_next;
}
}
ret = BLK_STS_IOERR;
end_io:
blk_mq_end_request(rq, ret);
}
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
}
static void lo_rw_aio_do_completion(struct loop_cmd *cmd)
{
struct request *rq = blk_mq_rq_from_pdu(cmd);
if (!atomic_dec_and_test(&cmd->ref))
return;
kfree(cmd->bvec);
cmd->bvec = NULL;
if (likely(!blk_should_fake_timeout(rq->q)))
blk_mq_complete_request(rq);
}
static void lo_rw_aio_complete(struct kiocb *iocb, long ret)
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
{
struct loop_cmd *cmd = container_of(iocb, struct loop_cmd, iocb);
cmd->ret = ret;
lo_rw_aio_do_completion(cmd);
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
}
static int lo_rw_aio(struct loop_device *lo, struct loop_cmd *cmd,
loff_t pos, bool rw)
{
struct iov_iter iter;
struct req_iterator rq_iter;
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
struct bio_vec *bvec;
struct request *rq = blk_mq_rq_from_pdu(cmd);
struct bio *bio = rq->bio;
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
struct file *file = lo->lo_backing_file;
struct bio_vec tmp;
unsigned int offset;
int nr_bvec = 0;
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
int ret;
rq_for_each_bvec(tmp, rq, rq_iter)
nr_bvec++;
if (rq->bio != rq->biotail) {
bvec = kmalloc_array(nr_bvec, sizeof(struct bio_vec),
treewide: kmalloc() -> kmalloc_array() The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 04:55:00 +08:00
GFP_NOIO);
if (!bvec)
return -EIO;
cmd->bvec = bvec;
/*
* The bios of the request may be started from the middle of
* the 'bvec' because of bio splitting, so we can't directly
* copy bio->bi_iov_vec to new bvec. The rq_for_each_bvec
* API will take care of all details for us.
*/
rq_for_each_bvec(tmp, rq, rq_iter) {
*bvec = tmp;
bvec++;
}
bvec = cmd->bvec;
offset = 0;
} else {
/*
* Same here, this bio may be started from the middle of the
* 'bvec' because of bio splitting, so offset from the bvec
* must be passed to iov iterator
*/
offset = bio->bi_iter.bi_bvec_done;
bvec = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter);
}
atomic_set(&cmd->ref, 2);
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
iov_iter_bvec(&iter, rw, bvec, nr_bvec, blk_rq_bytes(rq));
iter.iov_offset = offset;
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
cmd->iocb.ki_pos = pos;
cmd->iocb.ki_filp = file;
cmd->iocb.ki_complete = lo_rw_aio_complete;
cmd->iocb.ki_flags = IOCB_DIRECT;
cmd->iocb.ki_ioprio = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_NONE, 0);
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
if (rw == WRITE)
ret = call_write_iter(file, &cmd->iocb, &iter);
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
else
ret = call_read_iter(file, &cmd->iocb, &iter);
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
lo_rw_aio_do_completion(cmd);
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
if (ret != -EIOCBQUEUED)
lo_rw_aio_complete(&cmd->iocb, ret);
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
return 0;
}
static int do_req_filebacked(struct loop_device *lo, struct request *rq)
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
{
struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq);
loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset;
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
/*
* lo_write_simple and lo_read_simple should have been covered
* by io submit style function like lo_rw_aio(), one blocker
* is that lo_read_simple() need to call flush_dcache_page after
* the page is written from kernel, and it isn't easy to handle
* this in io submit style function which submits all segments
* of the req at one time. And direct read IO doesn't need to
* run flush_dcache_page().
*/
switch (req_op(rq)) {
case REQ_OP_FLUSH:
return lo_req_flush(lo, rq);
case REQ_OP_WRITE_ZEROES:
/*
* If the caller doesn't want deallocation, call zeroout to
* write zeroes the range. Otherwise, punch them out.
*/
return lo_fallocate(lo, rq, pos,
(rq->cmd_flags & REQ_NOUNMAP) ?
FALLOC_FL_ZERO_RANGE :
FALLOC_FL_PUNCH_HOLE);
case REQ_OP_DISCARD:
return lo_fallocate(lo, rq, pos, FALLOC_FL_PUNCH_HOLE);
case REQ_OP_WRITE:
if (cmd->use_aio)
return lo_rw_aio(lo, cmd, pos, WRITE);
else
return lo_write_simple(lo, rq, pos);
case REQ_OP_READ:
if (cmd->use_aio)
return lo_rw_aio(lo, cmd, pos, READ);
else
return lo_read_simple(lo, rq, pos);
default:
WARN_ON_ONCE(1);
return -EIO;
}
}
static inline void loop_update_dio(struct loop_device *lo)
{
__loop_update_dio(lo, (lo->lo_backing_file->f_flags & O_DIRECT) |
lo->use_dio);
}
static void loop_reread_partitions(struct loop_device *lo)
{
int rc;
mutex_lock(&lo->lo_disk->open_mutex);
rc = bdev_disk_changed(lo->lo_disk, false);
mutex_unlock(&lo->lo_disk->open_mutex);
if (rc)
pr_warn("%s: partition scan of loop%d (%s) failed (rc=%d)\n",
__func__, lo->lo_number, lo->lo_file_name, rc);
}
static inline int is_loop_device(struct file *file)
{
struct inode *i = file->f_mapping->host;
return i && S_ISBLK(i->i_mode) && imajor(i) == LOOP_MAJOR;
}
static int loop_validate_file(struct file *file, struct block_device *bdev)
{
struct inode *inode = file->f_mapping->host;
struct file *f = file;
/* Avoid recursion */
while (is_loop_device(f)) {
struct loop_device *l;
lockdep_assert_held(&loop_validate_mutex);
if (f->f_mapping->host->i_rdev == bdev->bd_dev)
return -EBADF;
l = I_BDEV(f->f_mapping->host)->bd_disk->private_data;
if (l->lo_state != Lo_bound)
return -EINVAL;
/* Order wrt setting lo->lo_backing_file in loop_configure(). */
rmb();
f = l->lo_backing_file;
}
if (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))
return -EINVAL;
return 0;
}
/*
* loop_change_fd switched the backing store of a loopback device to
* a new file. This is useful for operating system installers to free up
* the original file and in High Availability environments to switch to
* an alternative location for the content in case of server meltdown.
* This can only work if the loop device is used read-only, and if the
* new backing store is the same size and type as the old backing store.
*/
static int loop_change_fd(struct loop_device *lo, struct block_device *bdev,
unsigned int arg)
{
struct file *file = fget(arg);
struct file *old_file;
int error;
bool partscan;
bool is_loop;
if (!file)
return -EBADF;
is_loop = is_loop_device(file);
error = loop_global_lock_killable(lo, is_loop);
if (error)
goto out_putf;
error = -ENXIO;
if (lo->lo_state != Lo_bound)
goto out_err;
/* the loop device has to be read-only */
error = -EINVAL;
if (!(lo->lo_flags & LO_FLAGS_READ_ONLY))
goto out_err;
error = loop_validate_file(file, bdev);
if (error)
goto out_err;
old_file = lo->lo_backing_file;
error = -EINVAL;
/* size of the new backing store needs to be the same */
if (get_loop_size(lo, file) != get_loop_size(lo, old_file))
goto out_err;
/* and ... switch */
disk_force_media_change(lo->lo_disk, DISK_EVENT_MEDIA_CHANGE);
blk_mq_freeze_queue(lo->lo_queue);
mapping_set_gfp_mask(old_file->f_mapping, lo->old_gfp_mask);
lo->lo_backing_file = file;
lo->old_gfp_mask = mapping_gfp_mask(file->f_mapping);
mapping_set_gfp_mask(file->f_mapping,
lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS));
loop_update_dio(lo);
blk_mq_unfreeze_queue(lo->lo_queue);
partscan = lo->lo_flags & LO_FLAGS_PARTSCAN;
loop_global_unlock(lo, is_loop);
/*
* Flush loop_validate_file() before fput(), for l->lo_backing_file
* might be pointing at old_file which might be the last reference.
*/
if (!is_loop) {
mutex_lock(&loop_validate_mutex);
mutex_unlock(&loop_validate_mutex);
}
/*
* We must drop file reference outside of lo_mutex as dropping
* the file ref can take open_mutex which creates circular locking
* dependency.
*/
fput(old_file);
if (partscan)
loop_reread_partitions(lo);
return 0;
out_err:
loop_global_unlock(lo, is_loop);
out_putf:
fput(file);
return error;
}
/* loop sysfs attributes */
static ssize_t loop_attr_show(struct device *dev, char *page,
ssize_t (*callback)(struct loop_device *, char *))
{
struct gendisk *disk = dev_to_disk(dev);
struct loop_device *lo = disk->private_data;
return callback(lo, page);
}
#define LOOP_ATTR_RO(_name) \
static ssize_t loop_attr_##_name##_show(struct loop_device *, char *); \
static ssize_t loop_attr_do_show_##_name(struct device *d, \
struct device_attribute *attr, char *b) \
{ \
return loop_attr_show(d, b, loop_attr_##_name##_show); \
} \
static struct device_attribute loop_attr_##_name = \
__ATTR(_name, 0444, loop_attr_do_show_##_name, NULL);
static ssize_t loop_attr_backing_file_show(struct loop_device *lo, char *buf)
{
ssize_t ret;
char *p = NULL;
spin_lock_irq(&lo->lo_lock);
if (lo->lo_backing_file)
p = file_path(lo->lo_backing_file, buf, PAGE_SIZE - 1);
spin_unlock_irq(&lo->lo_lock);
if (IS_ERR_OR_NULL(p))
ret = PTR_ERR(p);
else {
ret = strlen(p);
memmove(buf, p, ret);
buf[ret++] = '\n';
buf[ret] = 0;
}
return ret;
}
static ssize_t loop_attr_offset_show(struct loop_device *lo, char *buf)
{
return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_offset);
}
static ssize_t loop_attr_sizelimit_show(struct loop_device *lo, char *buf)
{
return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
}
static ssize_t loop_attr_autoclear_show(struct loop_device *lo, char *buf)
{
int autoclear = (lo->lo_flags & LO_FLAGS_AUTOCLEAR);
return sprintf(buf, "%s\n", autoclear ? "1" : "0");
}
2011-08-24 02:12:04 +08:00
static ssize_t loop_attr_partscan_show(struct loop_device *lo, char *buf)
{
int partscan = (lo->lo_flags & LO_FLAGS_PARTSCAN);
return sprintf(buf, "%s\n", partscan ? "1" : "0");
}
static ssize_t loop_attr_dio_show(struct loop_device *lo, char *buf)
{
int dio = (lo->lo_flags & LO_FLAGS_DIRECT_IO);
return sprintf(buf, "%s\n", dio ? "1" : "0");
}
LOOP_ATTR_RO(backing_file);
LOOP_ATTR_RO(offset);
LOOP_ATTR_RO(sizelimit);
LOOP_ATTR_RO(autoclear);
2011-08-24 02:12:04 +08:00
LOOP_ATTR_RO(partscan);
LOOP_ATTR_RO(dio);
static struct attribute *loop_attrs[] = {
&loop_attr_backing_file.attr,
&loop_attr_offset.attr,
&loop_attr_sizelimit.attr,
&loop_attr_autoclear.attr,
2011-08-24 02:12:04 +08:00
&loop_attr_partscan.attr,
&loop_attr_dio.attr,
NULL,
};
static struct attribute_group loop_attribute_group = {
.name = "loop",
.attrs= loop_attrs,
};
static void loop_sysfs_init(struct loop_device *lo)
{
lo->sysfs_inited = !sysfs_create_group(&disk_to_dev(lo->lo_disk)->kobj,
&loop_attribute_group);
}
static void loop_sysfs_exit(struct loop_device *lo)
{
if (lo->sysfs_inited)
sysfs_remove_group(&disk_to_dev(lo->lo_disk)->kobj,
&loop_attribute_group);
}
static void loop_config_discard(struct loop_device *lo)
{
struct file *file = lo->lo_backing_file;
struct inode *inode = file->f_mapping->host;
struct request_queue *q = lo->lo_queue;
u32 granularity, max_discard_sectors;
/*
* If the backing device is a block device, mirror its zeroing
* capability. Set the discard sectors to the block device's zeroing
* capabilities because loop discards result in blkdev_issue_zeroout(),
* not blkdev_issue_discard(). This maintains consistent behavior with
* file-backed loop devices: discarded regions read back as zero.
*/
if (S_ISBLK(inode->i_mode)) {
struct request_queue *backingq = bdev_get_queue(I_BDEV(inode));
max_discard_sectors = backingq->limits.max_write_zeroes_sectors;
granularity = backingq->limits.discard_granularity ?:
queue_physical_block_size(backingq);
/*
* We use punch hole to reclaim the free space used by the
* image a.k.a. discard.
*/
} else if (!file->f_op->fallocate) {
max_discard_sectors = 0;
granularity = 0;
} else {
max_discard_sectors = UINT_MAX >> 9;
granularity = inode->i_sb->s_blocksize;
}
if (max_discard_sectors) {
q->limits.discard_granularity = granularity;
blk_queue_max_discard_sectors(q, max_discard_sectors);
blk_queue_max_write_zeroes_sectors(q, max_discard_sectors);
blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
} else {
q->limits.discard_granularity = 0;
blk_queue_max_discard_sectors(q, 0);
blk_queue_max_write_zeroes_sectors(q, 0);
blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
}
q->limits.discard_alignment = 0;
}
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
struct loop_worker {
struct rb_node rb_node;
struct work_struct work;
struct list_head cmd_list;
struct list_head idle_list;
struct loop_device *lo;
struct cgroup_subsys_state *blkcg_css;
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
unsigned long last_ran_at;
};
static void loop_workfn(struct work_struct *work);
static void loop_rootcg_workfn(struct work_struct *work);
static void loop_free_idle_workers(struct timer_list *timer);
#ifdef CONFIG_BLK_CGROUP
static inline int queue_on_root_worker(struct cgroup_subsys_state *css)
{
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
return !css || css == blkcg_root_css;
}
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
#else
static inline int queue_on_root_worker(struct cgroup_subsys_state *css)
loop: Add PF_LESS_THROTTLE to block/loop device thread. When a filesystem is mounted from a loop device, writes are throttled by balance_dirty_pages() twice: once when writing to the filesystem and once when the loop_handle_cmd() writes to the backing file. This double-throttling can trigger positive feedback loops that create significant delays. The throttling at the lower level is seen by the upper level as a slow device, so it throttles extra hard. The PF_LESS_THROTTLE flag was created to handle exactly this circumstance, though with an NFS filesystem mounted from a local NFS server. It reduces the throttling on the lower layer so that it can proceed largely unthrottled. To demonstrate this, create a filesystem on a loop device and write (e.g. with dd) several large files which combine to consume significantly more than the limit set by /proc/sys/vm/dirty_ratio or dirty_bytes. Measure the total time taken. When I do this directly on a device (no loop device) the total time for several runs (mkfs, mount, write 200 files, umount) is fairly stable: 28-35 seconds. When I do this over a loop device the times are much worse and less stable. 52-460 seconds. Half below 100seconds, half above. When I apply this patch, the times become stable again, though not as fast as the no-loop-back case: 53-72 seconds. There may be room for further improvement as the total overhead still seems too high, but this is a big improvement. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-16 13:02:09 +08:00
{
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
return !css;
loop: Add PF_LESS_THROTTLE to block/loop device thread. When a filesystem is mounted from a loop device, writes are throttled by balance_dirty_pages() twice: once when writing to the filesystem and once when the loop_handle_cmd() writes to the backing file. This double-throttling can trigger positive feedback loops that create significant delays. The throttling at the lower level is seen by the upper level as a slow device, so it throttles extra hard. The PF_LESS_THROTTLE flag was created to handle exactly this circumstance, though with an NFS filesystem mounted from a local NFS server. It reduces the throttling on the lower layer so that it can proceed largely unthrottled. To demonstrate this, create a filesystem on a loop device and write (e.g. with dd) several large files which combine to consume significantly more than the limit set by /proc/sys/vm/dirty_ratio or dirty_bytes. Measure the total time taken. When I do this directly on a device (no loop device) the total time for several runs (mkfs, mount, write 200 files, umount) is fairly stable: 28-35 seconds. When I do this over a loop device the times are much worse and less stable. 52-460 seconds. Half below 100seconds, half above. When I apply this patch, the times become stable again, though not as fast as the no-loop-back case: 53-72 seconds. There may be room for further improvement as the total overhead still seems too high, but this is a big improvement. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-16 13:02:09 +08:00
}
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
#endif
loop: Add PF_LESS_THROTTLE to block/loop device thread. When a filesystem is mounted from a loop device, writes are throttled by balance_dirty_pages() twice: once when writing to the filesystem and once when the loop_handle_cmd() writes to the backing file. This double-throttling can trigger positive feedback loops that create significant delays. The throttling at the lower level is seen by the upper level as a slow device, so it throttles extra hard. The PF_LESS_THROTTLE flag was created to handle exactly this circumstance, though with an NFS filesystem mounted from a local NFS server. It reduces the throttling on the lower layer so that it can proceed largely unthrottled. To demonstrate this, create a filesystem on a loop device and write (e.g. with dd) several large files which combine to consume significantly more than the limit set by /proc/sys/vm/dirty_ratio or dirty_bytes. Measure the total time taken. When I do this directly on a device (no loop device) the total time for several runs (mkfs, mount, write 200 files, umount) is fairly stable: 28-35 seconds. When I do this over a loop device the times are much worse and less stable. 52-460 seconds. Half below 100seconds, half above. When I apply this patch, the times become stable again, though not as fast as the no-loop-back case: 53-72 seconds. There may be room for further improvement as the total overhead still seems too high, but this is a big improvement. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-16 13:02:09 +08:00
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
static void loop_queue_work(struct loop_device *lo, struct loop_cmd *cmd)
{
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
struct rb_node **node = &(lo->worker_tree.rb_node), *parent = NULL;
struct loop_worker *cur_worker, *worker = NULL;
struct work_struct *work;
struct list_head *cmd_list;
spin_lock_irq(&lo->lo_work_lock);
if (queue_on_root_worker(cmd->blkcg_css))
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
goto queue_work;
node = &lo->worker_tree.rb_node;
while (*node) {
parent = *node;
cur_worker = container_of(*node, struct loop_worker, rb_node);
if (cur_worker->blkcg_css == cmd->blkcg_css) {
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
worker = cur_worker;
break;
} else if ((long)cur_worker->blkcg_css < (long)cmd->blkcg_css) {
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
node = &(*node)->rb_left;
} else {
node = &(*node)->rb_right;
}
}
if (worker)
goto queue_work;
worker = kzalloc(sizeof(struct loop_worker), GFP_NOWAIT | __GFP_NOWARN);
/*
* In the event we cannot allocate a worker, just queue on the
* rootcg worker and issue the I/O as the rootcg
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
*/
if (!worker) {
cmd->blkcg_css = NULL;
if (cmd->memcg_css)
css_put(cmd->memcg_css);
cmd->memcg_css = NULL;
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
goto queue_work;
}
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
worker->blkcg_css = cmd->blkcg_css;
css_get(worker->blkcg_css);
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
INIT_WORK(&worker->work, loop_workfn);
INIT_LIST_HEAD(&worker->cmd_list);
INIT_LIST_HEAD(&worker->idle_list);
worker->lo = lo;
rb_link_node(&worker->rb_node, parent, node);
rb_insert_color(&worker->rb_node, &lo->worker_tree);
queue_work:
if (worker) {
/*
* We need to remove from the idle list here while
* holding the lock so that the idle timer doesn't
* free the worker
*/
if (!list_empty(&worker->idle_list))
list_del_init(&worker->idle_list);
work = &worker->work;
cmd_list = &worker->cmd_list;
} else {
work = &lo->rootcg_work;
cmd_list = &lo->rootcg_cmd_list;
}
list_add_tail(&cmd->list_entry, cmd_list);
queue_work(lo->workqueue, work);
spin_unlock_irq(&lo->lo_work_lock);
}
static void loop_update_rotational(struct loop_device *lo)
{
struct file *file = lo->lo_backing_file;
struct inode *file_inode = file->f_mapping->host;
struct block_device *file_bdev = file_inode->i_sb->s_bdev;
struct request_queue *q = lo->lo_queue;
bool nonrot = true;
/* not all filesystems (e.g. tmpfs) have a sb->s_bdev */
if (file_bdev)
nonrot = blk_queue_nonrot(bdev_get_queue(file_bdev));
if (nonrot)
blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
else
blk_queue_flag_clear(QUEUE_FLAG_NONROT, q);
}
/**
* loop_set_status_from_info - configure device from loop_info
* @lo: struct loop_device to configure
* @info: struct loop_info64 to configure the device with
*
* Configures the loop device parameters according to the passed
* in loop_info64 configuration.
*/
static int
loop_set_status_from_info(struct loop_device *lo,
const struct loop_info64 *info)
{
if ((unsigned int) info->lo_encrypt_key_size > LO_KEY_SIZE)
return -EINVAL;
switch (info->lo_encrypt_type) {
case LO_CRYPT_NONE:
break;
case LO_CRYPT_XOR:
pr_warn("support for the xor transformation has been removed.\n");
return -EINVAL;
case LO_CRYPT_CRYPTOAPI:
pr_warn("support for cryptoloop has been removed. Use dm-crypt instead.\n");
return -EINVAL;
default:
return -EINVAL;
}
lo->lo_offset = info->lo_offset;
lo->lo_sizelimit = info->lo_sizelimit;
memcpy(lo->lo_file_name, info->lo_file_name, LO_NAME_SIZE);
lo->lo_file_name[LO_NAME_SIZE-1] = 0;
lo->lo_flags = info->lo_flags;
return 0;
}
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
static int loop_configure(struct loop_device *lo, fmode_t mode,
struct block_device *bdev,
const struct loop_config *config)
{
struct file *file = fget(config->fd);
struct inode *inode;
struct address_space *mapping;
int error;
loff_t size;
bool partscan;
unsigned short bsize;
bool is_loop;
if (!file)
return -EBADF;
is_loop = is_loop_device(file);
/* This is safe, since we have a reference from open(). */
__module_get(THIS_MODULE);
/*
* If we don't hold exclusive handle for the device, upgrade to it
* here to avoid changing device under exclusive owner.
*/
if (!(mode & FMODE_EXCL)) {
error = bd_prepare_to_claim(bdev, loop_configure);
if (error)
goto out_putf;
}
error = loop_global_lock_killable(lo, is_loop);
if (error)
goto out_bdev;
error = -EBUSY;
if (lo->lo_state != Lo_unbound)
goto out_unlock;
error = loop_validate_file(file, bdev);
if (error)
goto out_unlock;
mapping = file->f_mapping;
inode = mapping->host;
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
if ((config->info.lo_flags & ~LOOP_CONFIGURE_SETTABLE_FLAGS) != 0) {
error = -EINVAL;
goto out_unlock;
}
if (config->block_size) {
error = blk_validate_block_size(config->block_size);
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
if (error)
goto out_unlock;
}
error = loop_set_status_from_info(lo, &config->info);
if (error)
goto out_unlock;
if (!(file->f_mode & FMODE_WRITE) || !(mode & FMODE_WRITE) ||
!file->f_op->write_iter)
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
lo->lo_flags |= LO_FLAGS_READ_ONLY;
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
lo->workqueue = alloc_workqueue("loop%d",
WQ_UNBOUND | WQ_FREEZABLE,
0,
lo->lo_number);
if (!lo->workqueue) {
error = -ENOMEM;
goto out_unlock;
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
}
disk_force_media_change(lo->lo_disk, DISK_EVENT_MEDIA_CHANGE);
set_disk_ro(lo->lo_disk, (lo->lo_flags & LO_FLAGS_READ_ONLY) != 0);
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
INIT_WORK(&lo->rootcg_work, loop_rootcg_workfn);
INIT_LIST_HEAD(&lo->rootcg_cmd_list);
INIT_LIST_HEAD(&lo->idle_worker_list);
lo->worker_tree = RB_ROOT;
timer_setup(&lo->timer, loop_free_idle_workers,
TIMER_DEFERRABLE);
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
lo->use_dio = lo->lo_flags & LO_FLAGS_DIRECT_IO;
lo->lo_device = bdev;
lo->lo_backing_file = file;
lo->old_gfp_mask = mapping_gfp_mask(mapping);
mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS));
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
if (!(lo->lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
blk_queue_write_cache(lo->lo_queue, true, false);
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
if (config->block_size)
bsize = config->block_size;
New code for 5.8: - Clean up io_is_direct. - Add a new statx flag to indicate when file data access is being done via DAX (as opposed to the page cache). - Update the documentation for how system administrators and application programmers can take advantage of the (still experimental DAX) feature. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl6wO7UACgkQ+H93GTRK tOtEaw//eShC2YE0S+GS7ihQ3x71PJa4Is0VZOIpTHl01aqMSegwB3QbDQbVUhn1 TzLhUw4pZsz3R9GbUOrfHOYRt+aSP2t0WNhIulDeBp41CYJQSaFt85KnfM9hoBOi VYssum3Lu7/6ReKrDD/mumzWYkts+JDCuXRmt7nOQeZJVNXOCBBbvN354V4/IKLY wB4Wnaq3f3gYniXYW/23aCX+kocaOIUZtK6aFKyeD0KvfP5toDlpw1cBVMoM9CmO bmEy8vKf4lgFZDLeDMqmWOecMgEH5h0baN5Psu13WuDCiCd6maBl0KpxVpVlwsep yVz6mMbZjmLOJ2lqyw+lZb+XicD+K3yRVSTGKxV3VbuRjeX9tjVG5Im13VesNvJB WWJq/CkOU8W0Zs7Q5RbUDGbFFWDJSI/OStAU+UeuWvL9Gndv7hqv6H904qbPPtEu 4m4Y34ARzrEaKpkABKKwQ53cLClNxmmgUN9N3cXK3mk8idlX4zM3j6+HJYUxXTO+ fBjhOlyUy2KaWmzZoJp28QvaU4iegGmMSuRnQ9HAvXmdxUA2K6+wjS6LCZGh04vz z7SbzTBlo2kvsKdRMwJ306s2QA0/HvmKHHLI+p8OQANce9hjhE3XdJayzhitd0fk k0D/y8OY+fbCSgI8C4g66lA8Zf2sos/ulD0QTTNBPfU2rRWkKUc= =rS19 -----END PGP SIGNATURE----- Merge tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull DAX updates part one from Darrick Wong: "After many years of LKML-wrangling about how to enable programs to query and influence the file data access mode (DAX) when a filesystem resides on storage devices such as persistent memory, Ira Weiny has emerged with a proposed set of standard behaviors that has not been shot down by anyone! We're more or less standardizing on the current XFS behavior and adapting ext4 to do the same. This is the first of a handful pull requests that will make ext4 and XFS present a consistent interface for user programs that care about DAX. We add a statx attribute that programs can check to see if DAX is enabled on a particular file. Then, we update the DAX documentation to spell out the user-visible behaviors that filesystems will guarantee (until the next storage industry shakeup). The on-disk inode flag has been in XFS for a few years now. Summary: - Clean up io_is_direct. - Add a new statx flag to indicate when file data access is being done via DAX (as opposed to the page cache). - Update the documentation for how system administrators and application programmers can take advantage of the (still experimental DAX) feature" Link: https://lore.kernel.org/lkml/20200505002016.1085071-1-ira.weiny@intel.com/ * tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: Documentation/dax: Update Usage section fs/stat: Define DAX statx attribute fs: Remove unneeded IS_DAX() check in io_is_direct()
2020-06-03 10:45:12 +08:00
else if ((lo->lo_backing_file->f_flags & O_DIRECT) && inode->i_sb->s_bdev)
/* In case of direct I/O, match underlying block size */
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
bsize = bdev_logical_block_size(inode->i_sb->s_bdev);
else
bsize = 512;
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
blk_queue_logical_block_size(lo->lo_queue, bsize);
blk_queue_physical_block_size(lo->lo_queue, bsize);
blk_queue_io_min(lo->lo_queue, bsize);
loop_config_discard(lo);
loop_update_rotational(lo);
loop_update_dio(lo);
loop_sysfs_init(lo);
size = get_loop_size(lo, file);
loop_set_size(lo, size);
/* Order wrt reading lo_state in loop_validate_file(). */
wmb();
lo->lo_state = Lo_bound;
2011-08-24 02:12:04 +08:00
if (part_shift)
lo->lo_flags |= LO_FLAGS_PARTSCAN;
partscan = lo->lo_flags & LO_FLAGS_PARTSCAN;
if (partscan)
lo->lo_disk->flags &= ~GENHD_FL_NO_PART;
loop: prevent bdev freeing while device in use struct block_device lifecycle is defined by its inode (see fs/block_dev.c) - block_device allocated first time we access /dev/loopXX and deallocated on bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile" we want that block_device stay alive until we destroy the loop device with "losetup -d". But because we do not hold /dev/loopXX inode its counter goes 0, and inode/bdev can be destroyed at any moment. Usually it happens at memory pressure or when user drops inode cache (like in the test below). When later in loop_clr_fd() we want to use bdev we have use-after-free error with following stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000280 bd_set_size+0x10/0xa0 loop_clr_fd+0x1f8/0x420 [loop] lo_ioctl+0x200/0x7e0 [loop] lo_compat_ioctl+0x47/0xe0 [loop] compat_blkdev_ioctl+0x341/0x1290 do_filp_open+0x42/0xa0 compat_sys_ioctl+0xc1/0xf20 do_sys_open+0x16e/0x1d0 sysenter_dispatch+0x7/0x1a To prevent use-after-free we need to grab the device in loop_set_fd() and put it later in loop_clr_fd(). The issue is reprodusible on current Linus head and v3.3. Here is the test: dd if=/dev/zero of=loop.file bs=1M count=1 while [ true ]; do losetup /dev/loop0 loop.file echo 2 > /proc/sys/vm/drop_caches losetup -d /dev/loop0 done [ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every time we call loop_set_fd() we check that loop_device->lo_state is Lo_unbound and set it to Lo_bound If somebody will try to set_fd again it will get EBUSY. And if we try to loop_clr_fd() on unbound loop device we'll get ENXIO. loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under loop_device->lo_ctl_mutex. ] Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-02 00:47:56 +08:00
loop_global_unlock(lo, is_loop);
if (partscan)
loop_reread_partitions(lo);
if (!(mode & FMODE_EXCL))
bd_abort_claiming(bdev, loop_configure);
return 0;
out_unlock:
loop_global_unlock(lo, is_loop);
out_bdev:
if (!(mode & FMODE_EXCL))
bd_abort_claiming(bdev, loop_configure);
out_putf:
fput(file);
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
return error;
}
static void __loop_clr_fd(struct loop_device *lo)
{
struct file *filp;
gfp_t gfp = lo->old_gfp_mask;
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
struct loop_worker *pos, *worker;
/*
* Flush loop_configure() and loop_change_fd(). It is acceptable for
* loop_validate_file() to succeed, for actual clear operation has not
* started yet.
*/
mutex_lock(&loop_validate_mutex);
mutex_unlock(&loop_validate_mutex);
/*
* loop_validate_file() now fails because l->lo_state != Lo_bound
* became visible.
*/
/*
* Since this function is called upon "ioctl(LOOP_CLR_FD)" xor "close()
* after ioctl(LOOP_CLR_FD)", it is a sign of something going wrong if
* lo->lo_state has changed while waiting for lo->lo_mutex.
*/
mutex_lock(&lo->lo_mutex);
BUG_ON(lo->lo_state != Lo_rundown);
mutex_unlock(&lo->lo_mutex);
loop: fix I/O error on fsync() in detached loop devices There's an I/O error on fsync() in a detached loop device if it has been previously attached. The issue is write cache is enabled in the attach path in loop_configure() but it isn't disabled in the detach path; thus it remains enabled in the block device regardless of whether it is attached or not. Now fsync() can get an I/O request that will just be failed later in loop_queue_rq() as device's state is not 'Lo_bound'. So, disable write cache in the detach path. Do so based on the queue flag, not the loop device flag for read-only (used to enable) as the queue flag can be changed via sysfs even on read-only loop devices (e.g., losetup -r.) Test-case: # DEV=/dev/loop7 # IMG=/tmp/image # truncate --size 1M $IMG # losetup $DEV $IMG # losetup -d $DEV Before: # strace -e fsync parted -s $DEV print 2>&1 | grep fsync fsync(3) = -1 EIO (Input/output error) Warning: Error fsyncing/closing /dev/loop7: Input/output error [ 982.529929] blk_update_request: I/O error, dev loop7, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0 After: # strace -e fsync parted -s $DEV print 2>&1 | grep fsync fsync(3) = 0 Co-developed-by: Eric Desrochers <eric.desrochers@canonical.com> Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com> Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Tested-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-22 23:41:23 +08:00
if (test_bit(QUEUE_FLAG_WC, &lo->lo_queue->queue_flags))
blk_queue_write_cache(lo->lo_queue, false, false);
/* freeze request queue during the transition */
blk_mq_freeze_queue(lo->lo_queue);
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
destroy_workqueue(lo->workqueue);
spin_lock_irq(&lo->lo_work_lock);
list_for_each_entry_safe(worker, pos, &lo->idle_worker_list,
idle_list) {
list_del(&worker->idle_list);
rb_erase(&worker->rb_node, &lo->worker_tree);
css_put(worker->blkcg_css);
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
kfree(worker);
}
spin_unlock_irq(&lo->lo_work_lock);
del_timer_sync(&lo->timer);
spin_lock_irq(&lo->lo_lock);
filp = lo->lo_backing_file;
lo->lo_backing_file = NULL;
spin_unlock_irq(&lo->lo_lock);
lo->lo_device = NULL;
lo->lo_offset = 0;
lo->lo_sizelimit = 0;
memset(lo->lo_file_name, 0, LO_NAME_SIZE);
blk_queue_logical_block_size(lo->lo_queue, 512);
blk_queue_physical_block_size(lo->lo_queue, 512);
blk_queue_io_min(lo->lo_queue, 512);
invalidate_disk(lo->lo_disk);
loop_sysfs_exit(lo);
/* let user-space know about this change */
kobject_uevent(&disk_to_dev(lo->lo_disk)->kobj, KOBJ_CHANGE);
mapping_set_gfp_mask(filp->f_mapping, gfp);
blk_mq_unfreeze_queue(lo->lo_queue);
disk_force_media_change(lo->lo_disk, DISK_EVENT_MEDIA_CHANGE);
if (lo->lo_flags & LO_FLAGS_PARTSCAN) {
int err;
mutex_lock(&lo->lo_disk->open_mutex);
err = bdev_disk_changed(lo->lo_disk, false);
mutex_unlock(&lo->lo_disk->open_mutex);
if (err)
pr_warn("%s: partition scan of loop%d failed (rc=%d)\n",
__func__, lo->lo_number, err);
/* Device is gone, no point in returning error */
}
lo->lo_flags = 0;
if (!part_shift)
lo->lo_disk->flags |= GENHD_FL_NO_PART;
fput(filp);
}
static void loop_rundown_completed(struct loop_device *lo)
{
mutex_lock(&lo->lo_mutex);
lo->lo_state = Lo_unbound;
mutex_unlock(&lo->lo_mutex);
module_put(THIS_MODULE);
}
static void loop_rundown_workfn(struct work_struct *work)
{
struct loop_device *lo = container_of(work, struct loop_device,
rundown_work);
struct block_device *bdev = lo->lo_device;
struct gendisk *disk = lo->lo_disk;
__loop_clr_fd(lo);
kobject_put(&bdev->bd_device.kobj);
module_put(disk->fops->owner);
loop_rundown_completed(lo);
}
static void loop_schedule_rundown(struct loop_device *lo)
{
struct block_device *bdev = lo->lo_device;
struct gendisk *disk = lo->lo_disk;
__module_get(disk->fops->owner);
kobject_get(&bdev->bd_device.kobj);
INIT_WORK(&lo->rundown_work, loop_rundown_workfn);
queue_work(system_long_wq, &lo->rundown_work);
}
static int loop_clr_fd(struct loop_device *lo)
{
int err;
err = mutex_lock_killable(&lo->lo_mutex);
if (err)
return err;
if (lo->lo_state != Lo_bound) {
mutex_unlock(&lo->lo_mutex);
return -ENXIO;
}
/*
* If we've explicitly asked to tear down the loop device,
* and it has an elevated reference count, set it for auto-teardown when
* the last reference goes away. This stops $!~#$@ udev from
* preventing teardown because it decided that it needs to run blkid on
* the loopback device whenever they appear. xfstests is notorious for
* failing tests because blkid via udev races with a losetup
* <dev>/do something like mkfs/losetup -d <dev> causing the losetup -d
* command to fail with EBUSY.
*/
if (atomic_read(&lo->lo_refcnt) > 1) {
lo->lo_flags |= LO_FLAGS_AUTOCLEAR;
mutex_unlock(&lo->lo_mutex);
return 0;
}
lo->lo_state = Lo_rundown;
mutex_unlock(&lo->lo_mutex);
__loop_clr_fd(lo);
loop_rundown_completed(lo);
return 0;
}
static int
loop_set_status(struct loop_device *lo, const struct loop_info64 *info)
{
int err;
int prev_lo_flags;
bool partscan = false;
bool size_changed = false;
err = mutex_lock_killable(&lo->lo_mutex);
if (err)
return err;
if (lo->lo_state != Lo_bound) {
err = -ENXIO;
goto out_unlock;
}
if (lo->lo_offset != info->lo_offset ||
lo->lo_sizelimit != info->lo_sizelimit) {
size_changed = true;
sync_blockdev(lo->lo_device);
invalidate_bdev(lo->lo_device);
}
block/loop: fix race between I/O and set_status Inside set_status, transfer need to setup again, so we have to drain IO before the transition, otherwise oops may be triggered like the following: divide error: 0000 [#1] SMP KASAN CPU: 0 PID: 2935 Comm: loop7 Not tainted 4.10.0-rc7+ #213 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88006ba1e840 task.stack: ffff880067338000 RIP: 0010:transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP: 0018:ffff88006733f108 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800688d7000 RCX: 0000000000000059 RDX: 0000000000000000 RSI: 1ffff1000d743f43 RDI: ffff880068891c08 RBP: ffff88006733f160 R08: ffff8800688d7001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800688d7000 R13: ffff880067b7d000 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006c17e0 CR3: 0000000066e3b000 CR4: 00000000001406f0 Call Trace: lo_do_transfer drivers/block/loop.c:251 [inline] lo_read_transfer drivers/block/loop.c:392 [inline] do_req_filebacked drivers/block/loop.c:541 [inline] loop_handle_cmd drivers/block/loop.c:1677 [inline] loop_queue_work+0xda0/0x49b0 drivers/block/loop.c:1689 kthread_worker_fn+0x4c3/0xa30 kernel/kthread.c:630 kthread+0x326/0x3f0 kernel/kthread.c:227 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 03 83 e2 07 41 29 df 42 0f b6 04 30 4d 8d 44 24 01 38 d0 7f 08 84 c0 0f 85 62 02 00 00 44 89 f8 41 0f b6 48 ff 25 ff 01 00 00 99 <f7> 7d c8 48 63 d2 48 03 55 d0 48 89 d0 48 89 d7 48 c1 e8 03 83 RIP: transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP: ffff88006733f108 ---[ end trace 0166f7bd3b0c0933 ]--- Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-11 11:40:45 +08:00
/* I/O need to be drained during transfer transition */
blk_mq_freeze_queue(lo->lo_queue);
if (size_changed && lo->lo_device->bd_inode->i_mapping->nrpages) {
/* If any pages were dirtied after invalidate_bdev(), try again */
err = -EAGAIN;
pr_warn("%s: loop%d (%s) has still dirty pages (nrpages=%lu)\n",
__func__, lo->lo_number, lo->lo_file_name,
lo->lo_device->bd_inode->i_mapping->nrpages);
goto out_unfreeze;
}
prev_lo_flags = lo->lo_flags;
err = loop_set_status_from_info(lo, info);
if (err)
goto out_unfreeze;
/* Mask out flags that can't be set using LOOP_SET_STATUS. */
lo->lo_flags &= LOOP_SET_STATUS_SETTABLE_FLAGS;
/* For those flags, use the previous values instead */
lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_SETTABLE_FLAGS;
/* For flags that can't be cleared, use previous values too */
lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_CLEARABLE_FLAGS;
if (size_changed) {
loff_t new_size = get_size(lo->lo_offset, lo->lo_sizelimit,
lo->lo_backing_file);
loop_set_size(lo, new_size);
}
loop_config_discard(lo);
/* update dio if lo_offset or transfer is changed */
__loop_update_dio(lo, lo->use_dio);
out_unfreeze:
block/loop: fix race between I/O and set_status Inside set_status, transfer need to setup again, so we have to drain IO before the transition, otherwise oops may be triggered like the following: divide error: 0000 [#1] SMP KASAN CPU: 0 PID: 2935 Comm: loop7 Not tainted 4.10.0-rc7+ #213 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88006ba1e840 task.stack: ffff880067338000 RIP: 0010:transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP: 0018:ffff88006733f108 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800688d7000 RCX: 0000000000000059 RDX: 0000000000000000 RSI: 1ffff1000d743f43 RDI: ffff880068891c08 RBP: ffff88006733f160 R08: ffff8800688d7001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800688d7000 R13: ffff880067b7d000 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006c17e0 CR3: 0000000066e3b000 CR4: 00000000001406f0 Call Trace: lo_do_transfer drivers/block/loop.c:251 [inline] lo_read_transfer drivers/block/loop.c:392 [inline] do_req_filebacked drivers/block/loop.c:541 [inline] loop_handle_cmd drivers/block/loop.c:1677 [inline] loop_queue_work+0xda0/0x49b0 drivers/block/loop.c:1689 kthread_worker_fn+0x4c3/0xa30 kernel/kthread.c:630 kthread+0x326/0x3f0 kernel/kthread.c:227 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 03 83 e2 07 41 29 df 42 0f b6 04 30 4d 8d 44 24 01 38 d0 7f 08 84 c0 0f 85 62 02 00 00 44 89 f8 41 0f b6 48 ff 25 ff 01 00 00 99 <f7> 7d c8 48 63 d2 48 03 55 d0 48 89 d0 48 89 d7 48 c1 e8 03 83 RIP: transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP: ffff88006733f108 ---[ end trace 0166f7bd3b0c0933 ]--- Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-11 11:40:45 +08:00
blk_mq_unfreeze_queue(lo->lo_queue);
if (!err && (lo->lo_flags & LO_FLAGS_PARTSCAN) &&
!(prev_lo_flags & LO_FLAGS_PARTSCAN)) {
lo->lo_disk->flags &= ~GENHD_FL_NO_PART;
partscan = true;
}
out_unlock:
mutex_unlock(&lo->lo_mutex);
if (partscan)
loop_reread_partitions(lo);
block/loop: fix race between I/O and set_status Inside set_status, transfer need to setup again, so we have to drain IO before the transition, otherwise oops may be triggered like the following: divide error: 0000 [#1] SMP KASAN CPU: 0 PID: 2935 Comm: loop7 Not tainted 4.10.0-rc7+ #213 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88006ba1e840 task.stack: ffff880067338000 RIP: 0010:transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP: 0018:ffff88006733f108 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800688d7000 RCX: 0000000000000059 RDX: 0000000000000000 RSI: 1ffff1000d743f43 RDI: ffff880068891c08 RBP: ffff88006733f160 R08: ffff8800688d7001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800688d7000 R13: ffff880067b7d000 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006c17e0 CR3: 0000000066e3b000 CR4: 00000000001406f0 Call Trace: lo_do_transfer drivers/block/loop.c:251 [inline] lo_read_transfer drivers/block/loop.c:392 [inline] do_req_filebacked drivers/block/loop.c:541 [inline] loop_handle_cmd drivers/block/loop.c:1677 [inline] loop_queue_work+0xda0/0x49b0 drivers/block/loop.c:1689 kthread_worker_fn+0x4c3/0xa30 kernel/kthread.c:630 kthread+0x326/0x3f0 kernel/kthread.c:227 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 03 83 e2 07 41 29 df 42 0f b6 04 30 4d 8d 44 24 01 38 d0 7f 08 84 c0 0f 85 62 02 00 00 44 89 f8 41 0f b6 48 ff 25 ff 01 00 00 99 <f7> 7d c8 48 63 d2 48 03 55 d0 48 89 d0 48 89 d7 48 c1 e8 03 83 RIP: transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP: ffff88006733f108 ---[ end trace 0166f7bd3b0c0933 ]--- Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-11 11:40:45 +08:00
return err;
}
static int
loop_get_status(struct loop_device *lo, struct loop_info64 *info)
{
struct path path;
struct kstat stat;
int ret;
ret = mutex_lock_killable(&lo->lo_mutex);
if (ret)
return ret;
if (lo->lo_state != Lo_bound) {
mutex_unlock(&lo->lo_mutex);
return -ENXIO;
}
memset(info, 0, sizeof(*info));
info->lo_number = lo->lo_number;
info->lo_offset = lo->lo_offset;
info->lo_sizelimit = lo->lo_sizelimit;
info->lo_flags = lo->lo_flags;
memcpy(info->lo_file_name, lo->lo_file_name, LO_NAME_SIZE);
/* Drop lo_mutex while we call into the filesystem. */
path = lo->lo_backing_file->f_path;
path_get(&path);
mutex_unlock(&lo->lo_mutex);
ret = vfs_getattr(&path, &stat, STATX_INO, AT_STATX_SYNC_AS_STAT);
if (!ret) {
info->lo_device = huge_encode_dev(stat.dev);
info->lo_inode = stat.ino;
info->lo_rdevice = huge_encode_dev(stat.rdev);
}
path_put(&path);
return ret;
}
static void
loop_info64_from_old(const struct loop_info *info, struct loop_info64 *info64)
{
memset(info64, 0, sizeof(*info64));
info64->lo_number = info->lo_number;
info64->lo_device = info->lo_device;
info64->lo_inode = info->lo_inode;
info64->lo_rdevice = info->lo_rdevice;
info64->lo_offset = info->lo_offset;
info64->lo_sizelimit = 0;
info64->lo_flags = info->lo_flags;
memcpy(info64->lo_file_name, info->lo_name, LO_NAME_SIZE);
}
static int
loop_info64_to_old(const struct loop_info64 *info64, struct loop_info *info)
{
memset(info, 0, sizeof(*info));
info->lo_number = info64->lo_number;
info->lo_device = info64->lo_device;
info->lo_inode = info64->lo_inode;
info->lo_rdevice = info64->lo_rdevice;
info->lo_offset = info64->lo_offset;
info->lo_flags = info64->lo_flags;
memcpy(info->lo_name, info64->lo_file_name, LO_NAME_SIZE);
/* error in case values were truncated */
if (info->lo_device != info64->lo_device ||
info->lo_rdevice != info64->lo_rdevice ||
info->lo_inode != info64->lo_inode ||
info->lo_offset != info64->lo_offset)
return -EOVERFLOW;
return 0;
}
static int
loop_set_status_old(struct loop_device *lo, const struct loop_info __user *arg)
{
struct loop_info info;
struct loop_info64 info64;
if (copy_from_user(&info, arg, sizeof (struct loop_info)))
return -EFAULT;
loop_info64_from_old(&info, &info64);
return loop_set_status(lo, &info64);
}
static int
loop_set_status64(struct loop_device *lo, const struct loop_info64 __user *arg)
{
struct loop_info64 info64;
if (copy_from_user(&info64, arg, sizeof (struct loop_info64)))
return -EFAULT;
return loop_set_status(lo, &info64);
}
static int
loop_get_status_old(struct loop_device *lo, struct loop_info __user *arg) {
struct loop_info info;
struct loop_info64 info64;
int err;
if (!arg)
return -EINVAL;
err = loop_get_status(lo, &info64);
if (!err)
err = loop_info64_to_old(&info64, &info);
if (!err && copy_to_user(arg, &info, sizeof(info)))
err = -EFAULT;
return err;
}
static int
loop_get_status64(struct loop_device *lo, struct loop_info64 __user *arg) {
struct loop_info64 info64;
int err;
if (!arg)
return -EINVAL;
err = loop_get_status(lo, &info64);
if (!err && copy_to_user(arg, &info64, sizeof(info64)))
err = -EFAULT;
return err;
}
static int loop_set_capacity(struct loop_device *lo)
loop: add ioctl to resize a loop device Add the ability to 'resize' the loop device on the fly. One practical application is a loop file with XFS filesystem, already mounted: You can easily enlarge the file (append some bytes) and then call ioctl(fd, LOOP_SET_CAPACITY, new); The loop driver will learn about the new size and you can use xfs_growfs later on, which will allow you to use full capacity of the loop file without the need to unmount. Test app: #include <linux/fs.h> #include <linux/loop.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <assert.h> #include <errno.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #define _GNU_SOURCE #include <getopt.h> char *me; void usage(FILE *f) { fprintf(f, "%s [options] loop_dev [backend_file]\n" "-s, --set new_size_in_bytes\n" "\twhen backend_file is given, " "it will be expanded too while keeping the original contents\n", me); } struct option opts[] = { { .name = "set", .has_arg = 1, .flag = NULL, .val = 's' }, { .name = "help", .has_arg = 0, .flag = NULL, .val = 'h' } }; void err_size(char *name, __u64 old) { fprintf(stderr, "size must be larger than current %s (%llu)\n", name, old); } int main(int argc, char *argv[]) { int fd, err, c, i, bfd; ssize_t ssz; size_t sz; __u64 old, new, append; char a[BUFSIZ]; struct stat st; FILE *out; char *backend, *dev; err = EINVAL; out = stderr; me = argv[0]; new = 0; while ((c = getopt_long(argc, argv, "s:h", opts, &i)) != -1) { switch (c) { case 's': errno = 0; new = strtoull(optarg, NULL, 0); if (errno) { err = errno; perror(argv[i]); goto out; } break; case 'h': err = 0; out = stdout; goto err; default: perror(argv[i]); goto err; } } if (optind < argc) dev = argv[optind++]; else goto err; fd = open(dev, O_RDONLY); if (fd < 0) { err = errno; perror(dev); goto out; } err = ioctl(fd, BLKGETSIZE64, &old); if (err) { err = errno; perror("ioctl BLKGETSIZE64"); goto out; } if (!new) { printf("%llu\n", old); goto out; } if (new < old) { err = EINVAL; err_size(dev, old); goto out; } if (optind < argc) { backend = argv[optind++]; bfd = open(backend, O_WRONLY|O_APPEND); if (bfd < 0) { err = errno; perror(backend); goto out; } err = fstat(bfd, &st); if (err) { err = errno; perror(backend); goto out; } if (new < st.st_size) { err = EINVAL; err_size(backend, st.st_size); goto out; } append = new - st.st_size; sz = sizeof(a); while (append > 0) { if (append < sz) sz = append; ssz = write(bfd, a, sz); if (ssz != sz) { err = errno; perror(backend); goto out; } append -= sz; } err = fsync(bfd); if (err) { err = errno; perror(backend); goto out; } } err = ioctl(fd, LOOP_SET_CAPACITY, new); if (err) { err = errno; perror("ioctl LOOP_SET_CAPACITY"); } goto out; err: usage(out); out: return err; } Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: Tomas Matejicek <tomas@slax.org> Cc: <util-linux-ng@vger.kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-api@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 06:23:43 +08:00
{
loff_t size;
loop: add ioctl to resize a loop device Add the ability to 'resize' the loop device on the fly. One practical application is a loop file with XFS filesystem, already mounted: You can easily enlarge the file (append some bytes) and then call ioctl(fd, LOOP_SET_CAPACITY, new); The loop driver will learn about the new size and you can use xfs_growfs later on, which will allow you to use full capacity of the loop file without the need to unmount. Test app: #include <linux/fs.h> #include <linux/loop.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <assert.h> #include <errno.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #define _GNU_SOURCE #include <getopt.h> char *me; void usage(FILE *f) { fprintf(f, "%s [options] loop_dev [backend_file]\n" "-s, --set new_size_in_bytes\n" "\twhen backend_file is given, " "it will be expanded too while keeping the original contents\n", me); } struct option opts[] = { { .name = "set", .has_arg = 1, .flag = NULL, .val = 's' }, { .name = "help", .has_arg = 0, .flag = NULL, .val = 'h' } }; void err_size(char *name, __u64 old) { fprintf(stderr, "size must be larger than current %s (%llu)\n", name, old); } int main(int argc, char *argv[]) { int fd, err, c, i, bfd; ssize_t ssz; size_t sz; __u64 old, new, append; char a[BUFSIZ]; struct stat st; FILE *out; char *backend, *dev; err = EINVAL; out = stderr; me = argv[0]; new = 0; while ((c = getopt_long(argc, argv, "s:h", opts, &i)) != -1) { switch (c) { case 's': errno = 0; new = strtoull(optarg, NULL, 0); if (errno) { err = errno; perror(argv[i]); goto out; } break; case 'h': err = 0; out = stdout; goto err; default: perror(argv[i]); goto err; } } if (optind < argc) dev = argv[optind++]; else goto err; fd = open(dev, O_RDONLY); if (fd < 0) { err = errno; perror(dev); goto out; } err = ioctl(fd, BLKGETSIZE64, &old); if (err) { err = errno; perror("ioctl BLKGETSIZE64"); goto out; } if (!new) { printf("%llu\n", old); goto out; } if (new < old) { err = EINVAL; err_size(dev, old); goto out; } if (optind < argc) { backend = argv[optind++]; bfd = open(backend, O_WRONLY|O_APPEND); if (bfd < 0) { err = errno; perror(backend); goto out; } err = fstat(bfd, &st); if (err) { err = errno; perror(backend); goto out; } if (new < st.st_size) { err = EINVAL; err_size(backend, st.st_size); goto out; } append = new - st.st_size; sz = sizeof(a); while (append > 0) { if (append < sz) sz = append; ssz = write(bfd, a, sz); if (ssz != sz) { err = errno; perror(backend); goto out; } append -= sz; } err = fsync(bfd); if (err) { err = errno; perror(backend); goto out; } } err = ioctl(fd, LOOP_SET_CAPACITY, new); if (err) { err = errno; perror("ioctl LOOP_SET_CAPACITY"); } goto out; err: usage(out); out: return err; } Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: Tomas Matejicek <tomas@slax.org> Cc: <util-linux-ng@vger.kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-api@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 06:23:43 +08:00
if (unlikely(lo->lo_state != Lo_bound))
return -ENXIO;
loop: add ioctl to resize a loop device Add the ability to 'resize' the loop device on the fly. One practical application is a loop file with XFS filesystem, already mounted: You can easily enlarge the file (append some bytes) and then call ioctl(fd, LOOP_SET_CAPACITY, new); The loop driver will learn about the new size and you can use xfs_growfs later on, which will allow you to use full capacity of the loop file without the need to unmount. Test app: #include <linux/fs.h> #include <linux/loop.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <assert.h> #include <errno.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #define _GNU_SOURCE #include <getopt.h> char *me; void usage(FILE *f) { fprintf(f, "%s [options] loop_dev [backend_file]\n" "-s, --set new_size_in_bytes\n" "\twhen backend_file is given, " "it will be expanded too while keeping the original contents\n", me); } struct option opts[] = { { .name = "set", .has_arg = 1, .flag = NULL, .val = 's' }, { .name = "help", .has_arg = 0, .flag = NULL, .val = 'h' } }; void err_size(char *name, __u64 old) { fprintf(stderr, "size must be larger than current %s (%llu)\n", name, old); } int main(int argc, char *argv[]) { int fd, err, c, i, bfd; ssize_t ssz; size_t sz; __u64 old, new, append; char a[BUFSIZ]; struct stat st; FILE *out; char *backend, *dev; err = EINVAL; out = stderr; me = argv[0]; new = 0; while ((c = getopt_long(argc, argv, "s:h", opts, &i)) != -1) { switch (c) { case 's': errno = 0; new = strtoull(optarg, NULL, 0); if (errno) { err = errno; perror(argv[i]); goto out; } break; case 'h': err = 0; out = stdout; goto err; default: perror(argv[i]); goto err; } } if (optind < argc) dev = argv[optind++]; else goto err; fd = open(dev, O_RDONLY); if (fd < 0) { err = errno; perror(dev); goto out; } err = ioctl(fd, BLKGETSIZE64, &old); if (err) { err = errno; perror("ioctl BLKGETSIZE64"); goto out; } if (!new) { printf("%llu\n", old); goto out; } if (new < old) { err = EINVAL; err_size(dev, old); goto out; } if (optind < argc) { backend = argv[optind++]; bfd = open(backend, O_WRONLY|O_APPEND); if (bfd < 0) { err = errno; perror(backend); goto out; } err = fstat(bfd, &st); if (err) { err = errno; perror(backend); goto out; } if (new < st.st_size) { err = EINVAL; err_size(backend, st.st_size); goto out; } append = new - st.st_size; sz = sizeof(a); while (append > 0) { if (append < sz) sz = append; ssz = write(bfd, a, sz); if (ssz != sz) { err = errno; perror(backend); goto out; } append -= sz; } err = fsync(bfd); if (err) { err = errno; perror(backend); goto out; } } err = ioctl(fd, LOOP_SET_CAPACITY, new); if (err) { err = errno; perror("ioctl LOOP_SET_CAPACITY"); } goto out; err: usage(out); out: return err; } Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: Tomas Matejicek <tomas@slax.org> Cc: <util-linux-ng@vger.kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-api@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 06:23:43 +08:00
size = get_loop_size(lo, lo->lo_backing_file);
loop_set_size(lo, size);
return 0;
loop: add ioctl to resize a loop device Add the ability to 'resize' the loop device on the fly. One practical application is a loop file with XFS filesystem, already mounted: You can easily enlarge the file (append some bytes) and then call ioctl(fd, LOOP_SET_CAPACITY, new); The loop driver will learn about the new size and you can use xfs_growfs later on, which will allow you to use full capacity of the loop file without the need to unmount. Test app: #include <linux/fs.h> #include <linux/loop.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <assert.h> #include <errno.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #define _GNU_SOURCE #include <getopt.h> char *me; void usage(FILE *f) { fprintf(f, "%s [options] loop_dev [backend_file]\n" "-s, --set new_size_in_bytes\n" "\twhen backend_file is given, " "it will be expanded too while keeping the original contents\n", me); } struct option opts[] = { { .name = "set", .has_arg = 1, .flag = NULL, .val = 's' }, { .name = "help", .has_arg = 0, .flag = NULL, .val = 'h' } }; void err_size(char *name, __u64 old) { fprintf(stderr, "size must be larger than current %s (%llu)\n", name, old); } int main(int argc, char *argv[]) { int fd, err, c, i, bfd; ssize_t ssz; size_t sz; __u64 old, new, append; char a[BUFSIZ]; struct stat st; FILE *out; char *backend, *dev; err = EINVAL; out = stderr; me = argv[0]; new = 0; while ((c = getopt_long(argc, argv, "s:h", opts, &i)) != -1) { switch (c) { case 's': errno = 0; new = strtoull(optarg, NULL, 0); if (errno) { err = errno; perror(argv[i]); goto out; } break; case 'h': err = 0; out = stdout; goto err; default: perror(argv[i]); goto err; } } if (optind < argc) dev = argv[optind++]; else goto err; fd = open(dev, O_RDONLY); if (fd < 0) { err = errno; perror(dev); goto out; } err = ioctl(fd, BLKGETSIZE64, &old); if (err) { err = errno; perror("ioctl BLKGETSIZE64"); goto out; } if (!new) { printf("%llu\n", old); goto out; } if (new < old) { err = EINVAL; err_size(dev, old); goto out; } if (optind < argc) { backend = argv[optind++]; bfd = open(backend, O_WRONLY|O_APPEND); if (bfd < 0) { err = errno; perror(backend); goto out; } err = fstat(bfd, &st); if (err) { err = errno; perror(backend); goto out; } if (new < st.st_size) { err = EINVAL; err_size(backend, st.st_size); goto out; } append = new - st.st_size; sz = sizeof(a); while (append > 0) { if (append < sz) sz = append; ssz = write(bfd, a, sz); if (ssz != sz) { err = errno; perror(backend); goto out; } append -= sz; } err = fsync(bfd); if (err) { err = errno; perror(backend); goto out; } } err = ioctl(fd, LOOP_SET_CAPACITY, new); if (err) { err = errno; perror("ioctl LOOP_SET_CAPACITY"); } goto out; err: usage(out); out: return err; } Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: Tomas Matejicek <tomas@slax.org> Cc: <util-linux-ng@vger.kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-api@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 06:23:43 +08:00
}
static int loop_set_dio(struct loop_device *lo, unsigned long arg)
{
int error = -ENXIO;
if (lo->lo_state != Lo_bound)
goto out;
__loop_update_dio(lo, !!arg);
if (lo->use_dio == !!arg)
return 0;
error = -EINVAL;
out:
return error;
}
static int loop_set_block_size(struct loop_device *lo, unsigned long arg)
{
int err = 0;
if (lo->lo_state != Lo_bound)
return -ENXIO;
err = blk_validate_block_size(arg);
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
if (err)
return err;
if (lo->lo_queue->limits.logical_block_size == arg)
return 0;
sync_blockdev(lo->lo_device);
invalidate_bdev(lo->lo_device);
blk_mq_freeze_queue(lo->lo_queue);
/* invalidate_bdev should have truncated all the pages */
if (lo->lo_device->bd_inode->i_mapping->nrpages) {
err = -EAGAIN;
pr_warn("%s: loop%d (%s) has still dirty pages (nrpages=%lu)\n",
__func__, lo->lo_number, lo->lo_file_name,
lo->lo_device->bd_inode->i_mapping->nrpages);
goto out_unfreeze;
}
blk_queue_logical_block_size(lo->lo_queue, arg);
blk_queue_physical_block_size(lo->lo_queue, arg);
blk_queue_io_min(lo->lo_queue, arg);
loop_update_dio(lo);
out_unfreeze:
blk_mq_unfreeze_queue(lo->lo_queue);
return err;
}
static int lo_simple_ioctl(struct loop_device *lo, unsigned int cmd,
unsigned long arg)
{
int err;
err = mutex_lock_killable(&lo->lo_mutex);
if (err)
return err;
switch (cmd) {
case LOOP_SET_CAPACITY:
err = loop_set_capacity(lo);
break;
case LOOP_SET_DIRECT_IO:
err = loop_set_dio(lo, arg);
break;
case LOOP_SET_BLOCK_SIZE:
err = loop_set_block_size(lo, arg);
break;
default:
err = -EINVAL;
}
mutex_unlock(&lo->lo_mutex);
return err;
}
static int lo_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
struct loop_device *lo = bdev->bd_disk->private_data;
void __user *argp = (void __user *) arg;
int err;
switch (cmd) {
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
case LOOP_SET_FD: {
/*
* Legacy case - pass in a zeroed out struct loop_config with
* only the file descriptor set , which corresponds with the
* default parameters we'd have used otherwise.
*/
struct loop_config config;
memset(&config, 0, sizeof(config));
config.fd = arg;
return loop_configure(lo, mode, bdev, &config);
}
case LOOP_CONFIGURE: {
struct loop_config config;
if (copy_from_user(&config, argp, sizeof(config)))
return -EFAULT;
return loop_configure(lo, mode, bdev, &config);
}
case LOOP_CHANGE_FD:
return loop_change_fd(lo, bdev, arg);
case LOOP_CLR_FD:
return loop_clr_fd(lo);
case LOOP_SET_STATUS:
err = -EPERM;
if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN)) {
err = loop_set_status_old(lo, argp);
}
break;
case LOOP_GET_STATUS:
return loop_get_status_old(lo, argp);
case LOOP_SET_STATUS64:
err = -EPERM;
if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN)) {
err = loop_set_status64(lo, argp);
}
break;
case LOOP_GET_STATUS64:
return loop_get_status64(lo, argp);
case LOOP_SET_CAPACITY:
case LOOP_SET_DIRECT_IO:
case LOOP_SET_BLOCK_SIZE:
if (!(mode & FMODE_WRITE) && !capable(CAP_SYS_ADMIN))
return -EPERM;
fallthrough;
default:
err = lo_simple_ioctl(lo, cmd, arg);
break;
}
loop: fix circular locking in loop_clr_fd() With CONFIG_PROVE_LOCKING enabled $ losetup /dev/loop0 file $ losetup -o 32256 /dev/loop1 /dev/loop0 $ losetup -d /dev/loop1 $ losetup -d /dev/loop0 triggers a [ INFO: possible circular locking dependency detected ] I think this warning is a false positive. Open/close on a loop device acquires bd_mutex of the device before acquiring lo_ctl_mutex of the same device. For ioctl(LOOP_CLR_FD) after acquiring lo_ctl_mutex, fput on the backing_file might acquire the bd_mutex of a device, if backing file is a device and this is the last reference to the file being dropped . But it is guaranteed that it is impossible to have a circular list of backing devices.(say loop2->loop1->loop0->loop2 is not possible), which guarantees that this can never deadlock. So this warning should be suppressed. It is very difficult to annotate lockdep not to warn here in the correct way. A simple way to silence lockdep could be to mark the lo_ctl_mutex in ioctl to be a sub class, but this might mask some other real bugs. @@ -1164,7 +1164,7 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode, struct loop_device *lo = bdev->bd_disk->private_data; int err; - mutex_lock(&lo->lo_ctl_mutex); + mutex_lock_nested(&lo->lo_ctl_mutex, 1); switch (cmd) { case LOOP_SET_FD: err = loop_set_fd(lo, mode, bdev, arg); Or actually marking the bd_mutex after lo_ctl_mutex as a sub class could be a better solution. Luckily it is easy to avoid calling fput on backing file with lo_ctl_mutex held, so no lockdep annotation is required. If you do not like the special handling of the lo_ctl_mutex just for the LOOP_CLR_FD ioctl in lo_ioctl(), the mutex handling could be moved inside each of the individual ioctl handlers and I could send you another patch. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-24 19:33:41 +08:00
return err;
}
#ifdef CONFIG_COMPAT
struct compat_loop_info {
compat_int_t lo_number; /* ioctl r/o */
compat_dev_t lo_device; /* ioctl r/o */
compat_ulong_t lo_inode; /* ioctl r/o */
compat_dev_t lo_rdevice; /* ioctl r/o */
compat_int_t lo_offset;
compat_int_t lo_encrypt_key_size; /* ioctl w/o */
compat_int_t lo_flags; /* ioctl r/o */
char lo_name[LO_NAME_SIZE];
unsigned char lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
compat_ulong_t lo_init[2];
char reserved[4];
};
/*
* Transfer 32-bit compatibility structure in userspace to 64-bit loop info
* - noinlined to reduce stack space usage in main part of driver
*/
static noinline int
loop_info64_from_compat(const struct compat_loop_info __user *arg,
struct loop_info64 *info64)
{
struct compat_loop_info info;
if (copy_from_user(&info, arg, sizeof(info)))
return -EFAULT;
memset(info64, 0, sizeof(*info64));
info64->lo_number = info.lo_number;
info64->lo_device = info.lo_device;
info64->lo_inode = info.lo_inode;
info64->lo_rdevice = info.lo_rdevice;
info64->lo_offset = info.lo_offset;
info64->lo_sizelimit = 0;
info64->lo_flags = info.lo_flags;
memcpy(info64->lo_file_name, info.lo_name, LO_NAME_SIZE);
return 0;
}
/*
* Transfer 64-bit loop info to 32-bit compatibility structure in userspace
* - noinlined to reduce stack space usage in main part of driver
*/
static noinline int
loop_info64_to_compat(const struct loop_info64 *info64,
struct compat_loop_info __user *arg)
{
struct compat_loop_info info;
memset(&info, 0, sizeof(info));
info.lo_number = info64->lo_number;
info.lo_device = info64->lo_device;
info.lo_inode = info64->lo_inode;
info.lo_rdevice = info64->lo_rdevice;
info.lo_offset = info64->lo_offset;
info.lo_flags = info64->lo_flags;
memcpy(info.lo_name, info64->lo_file_name, LO_NAME_SIZE);
/* error in case values were truncated */
if (info.lo_device != info64->lo_device ||
info.lo_rdevice != info64->lo_rdevice ||
info.lo_inode != info64->lo_inode ||
info.lo_offset != info64->lo_offset)
return -EOVERFLOW;
if (copy_to_user(arg, &info, sizeof(info)))
return -EFAULT;
return 0;
}
static int
loop_set_status_compat(struct loop_device *lo,
const struct compat_loop_info __user *arg)
{
struct loop_info64 info64;
int ret;
ret = loop_info64_from_compat(arg, &info64);
if (ret < 0)
return ret;
return loop_set_status(lo, &info64);
}
static int
loop_get_status_compat(struct loop_device *lo,
struct compat_loop_info __user *arg)
{
struct loop_info64 info64;
int err;
if (!arg)
return -EINVAL;
err = loop_get_status(lo, &info64);
if (!err)
err = loop_info64_to_compat(&info64, arg);
return err;
}
static int lo_compat_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
struct loop_device *lo = bdev->bd_disk->private_data;
int err;
switch(cmd) {
case LOOP_SET_STATUS:
err = loop_set_status_compat(lo,
(const struct compat_loop_info __user *)arg);
break;
case LOOP_GET_STATUS:
err = loop_get_status_compat(lo,
(struct compat_loop_info __user *)arg);
break;
loop: add ioctl to resize a loop device Add the ability to 'resize' the loop device on the fly. One practical application is a loop file with XFS filesystem, already mounted: You can easily enlarge the file (append some bytes) and then call ioctl(fd, LOOP_SET_CAPACITY, new); The loop driver will learn about the new size and you can use xfs_growfs later on, which will allow you to use full capacity of the loop file without the need to unmount. Test app: #include <linux/fs.h> #include <linux/loop.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <assert.h> #include <errno.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #define _GNU_SOURCE #include <getopt.h> char *me; void usage(FILE *f) { fprintf(f, "%s [options] loop_dev [backend_file]\n" "-s, --set new_size_in_bytes\n" "\twhen backend_file is given, " "it will be expanded too while keeping the original contents\n", me); } struct option opts[] = { { .name = "set", .has_arg = 1, .flag = NULL, .val = 's' }, { .name = "help", .has_arg = 0, .flag = NULL, .val = 'h' } }; void err_size(char *name, __u64 old) { fprintf(stderr, "size must be larger than current %s (%llu)\n", name, old); } int main(int argc, char *argv[]) { int fd, err, c, i, bfd; ssize_t ssz; size_t sz; __u64 old, new, append; char a[BUFSIZ]; struct stat st; FILE *out; char *backend, *dev; err = EINVAL; out = stderr; me = argv[0]; new = 0; while ((c = getopt_long(argc, argv, "s:h", opts, &i)) != -1) { switch (c) { case 's': errno = 0; new = strtoull(optarg, NULL, 0); if (errno) { err = errno; perror(argv[i]); goto out; } break; case 'h': err = 0; out = stdout; goto err; default: perror(argv[i]); goto err; } } if (optind < argc) dev = argv[optind++]; else goto err; fd = open(dev, O_RDONLY); if (fd < 0) { err = errno; perror(dev); goto out; } err = ioctl(fd, BLKGETSIZE64, &old); if (err) { err = errno; perror("ioctl BLKGETSIZE64"); goto out; } if (!new) { printf("%llu\n", old); goto out; } if (new < old) { err = EINVAL; err_size(dev, old); goto out; } if (optind < argc) { backend = argv[optind++]; bfd = open(backend, O_WRONLY|O_APPEND); if (bfd < 0) { err = errno; perror(backend); goto out; } err = fstat(bfd, &st); if (err) { err = errno; perror(backend); goto out; } if (new < st.st_size) { err = EINVAL; err_size(backend, st.st_size); goto out; } append = new - st.st_size; sz = sizeof(a); while (append > 0) { if (append < sz) sz = append; ssz = write(bfd, a, sz); if (ssz != sz) { err = errno; perror(backend); goto out; } append -= sz; } err = fsync(bfd); if (err) { err = errno; perror(backend); goto out; } } err = ioctl(fd, LOOP_SET_CAPACITY, new); if (err) { err = errno; perror("ioctl LOOP_SET_CAPACITY"); } goto out; err: usage(out); out: return err; } Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: Tomas Matejicek <tomas@slax.org> Cc: <util-linux-ng@vger.kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-api@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 06:23:43 +08:00
case LOOP_SET_CAPACITY:
case LOOP_CLR_FD:
case LOOP_GET_STATUS64:
case LOOP_SET_STATUS64:
loop: Add LOOP_CONFIGURE ioctl This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13 21:38:45 +08:00
case LOOP_CONFIGURE:
arg = (unsigned long) compat_ptr(arg);
fallthrough;
case LOOP_SET_FD:
case LOOP_CHANGE_FD:
case LOOP_SET_BLOCK_SIZE:
case LOOP_SET_DIRECT_IO:
err = lo_ioctl(bdev, mode, cmd, arg);
break;
default:
err = -ENOIOCTLCMD;
break;
}
return err;
}
#endif
static int lo_open(struct block_device *bdev, fmode_t mode)
{
struct loop_device *lo = bdev->bd_disk->private_data;
int err;
loop: add management interface for on-demand device allocation Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-01 04:08:04 +08:00
err = mutex_lock_killable(&lo->lo_mutex);
if (err)
return err;
if (lo->lo_state == Lo_deleting)
err = -ENXIO;
else
atomic_inc(&lo->lo_refcnt);
mutex_unlock(&lo->lo_mutex);
return err;
}
static void lo_release(struct gendisk *disk, fmode_t mode)
{
struct loop_device *lo = disk->private_data;
mutex_lock(&lo->lo_mutex);
if (atomic_dec_return(&lo->lo_refcnt))
goto out_unlock;
if (lo->lo_flags & LO_FLAGS_AUTOCLEAR) {
if (lo->lo_state != Lo_bound)
goto out_unlock;
lo->lo_state = Lo_rundown;
mutex_unlock(&lo->lo_mutex);
/*
* In autoclear mode, stop the loop thread
* and remove configuration after last close.
*/
loop_schedule_rundown(lo);
return;
} else if (lo->lo_state == Lo_bound) {
/*
* Otherwise keep thread (if running) and config,
* but flush possible ongoing bios in thread.
*/
blk_mq_freeze_queue(lo->lo_queue);
blk_mq_unfreeze_queue(lo->lo_queue);
}
out_unlock:
mutex_unlock(&lo->lo_mutex);
}
static const struct block_device_operations lo_fops = {
.owner = THIS_MODULE,
.open = lo_open,
.release = lo_release,
.ioctl = lo_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = lo_compat_ioctl,
#endif
};
/*
* And now the modules code and kernel interface.
*/
static int max_loop;
module_param(max_loop, int, 0444);
MODULE_PARM_DESC(max_loop, "Maximum number of loop devices");
module_param(max_part, int, 0444);
loop: manage partitions in disk image This patch allows to use loop device with partitionned disk image. Original behavior of loop is not modified. A new parameter is introduced to define how many partition we want to be able to manage per loop device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: # modprobe loop max_part=63 # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 And to attach a raw partitionned disk image, the original losetup is used: # losetup -f etch.img # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 1 2008-03-05 14:57 /dev/loop0p1 brw-rw---- 1 root disk 7, 2 2008-03-05 14:57 /dev/loop0p2 brw-rw---- 1 root disk 7, 5 2008-03-05 14:57 /dev/loop0p5 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 # mount /dev/loop0p1 /mnt # ls /mnt bench cdrom home lib mnt root srv usr bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz # umount /mnt # losetup -d /dev/loop0 Of course, the same behavior can be done using kpartx on a loop device, but modifying loop avoids to stack several layers of block device (loop + device mapper), this is a very light modification (40% of modifications are to manage the new parameter). Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-26 19:11:53 +08:00
MODULE_PARM_DESC(max_part, "Maximum number of partitions per loop device");
MODULE_LICENSE("GPL");
MODULE_ALIAS_BLOCKDEV_MAJOR(LOOP_MAJOR);
static blk_status_t loop_queue_rq(struct blk_mq_hw_ctx *hctx,
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
const struct blk_mq_queue_data *bd)
{
struct request *rq = bd->rq;
struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq);
struct loop_device *lo = rq->q->queuedata;
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
blk_mq_start_request(rq);
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
if (lo->lo_state != Lo_bound)
return BLK_STS_IOERR;
switch (req_op(rq)) {
case REQ_OP_FLUSH:
case REQ_OP_DISCARD:
case REQ_OP_WRITE_ZEROES:
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
cmd->use_aio = false;
break;
default:
cmd->use_aio = lo->use_dio;
break;
}
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
/* always use the first bio's css */
cmd->blkcg_css = NULL;
cmd->memcg_css = NULL;
#ifdef CONFIG_BLK_CGROUP
if (rq->bio && rq->bio->bi_blkg) {
cmd->blkcg_css = &bio_blkcg(rq->bio)->css;
#ifdef CONFIG_MEMCG
cmd->memcg_css =
cgroup_get_e_css(cmd->blkcg_css->cgroup,
&memory_cgrp_subsys);
#endif
}
#endif
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
loop_queue_work(lo, cmd);
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
return BLK_STS_OK;
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
}
static void loop_handle_cmd(struct loop_cmd *cmd)
{
struct request *rq = blk_mq_rq_from_pdu(cmd);
const bool write = op_is_write(req_op(rq));
struct loop_device *lo = rq->q->queuedata;
int ret = 0;
struct mem_cgroup *old_memcg = NULL;
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
if (write && (lo->lo_flags & LO_FLAGS_READ_ONLY)) {
ret = -EIO;
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
goto failed;
}
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
if (cmd->blkcg_css)
kthread_associate_blkcg(cmd->blkcg_css);
if (cmd->memcg_css)
old_memcg = set_active_memcg(
mem_cgroup_from_css(cmd->memcg_css));
ret = do_req_filebacked(lo, rq);
if (cmd->blkcg_css)
kthread_associate_blkcg(NULL);
if (cmd->memcg_css) {
set_active_memcg(old_memcg);
css_put(cmd->memcg_css);
}
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
failed:
block: loop: support DIO & AIO There are at least 3 advantages to use direct I/O and AIO on read/write loop's backing file: 1) double cache can be avoided, then memory usage gets decreased a lot 2) not like user space direct I/O, there isn't cost of pinning pages 3) avoid context switch for obtaining good throughput - in buffered file read, random I/O top throughput is often obtained only if they are submitted concurrently from lots of tasks; but for sequential I/O, most of times they can be hit from page cache, so concurrent submissions often introduce unnecessary context switch and can't improve throughput much. There was such discussion[1] to use non-blocking I/O to improve the problem for application. - with direct I/O and AIO, concurrent submissions can be avoided and random read throughput can't be affected meantime xfstests(-g auto, ext4) is basically passed when running with direct I/O(aio), one exception is generic/232, but it failed in loop buffered I/O(4.2-rc6-next-20150814) too. Follows the fio test result for performance purpose: 4 jobs fio test inside ext4 file system over loop block 1) How to run - KVM: 4 VCPUs, 2G RAM - linux kernel: 4.2-rc6-next-20150814(base) with the patchset - the loop block is over one image on SSD. - linux psync, 4 jobs, size 1500M, ext4 over loop block - test result: IOPS from fio output 2) Throughput(IOPS) becomes a bit better with direct I/O(aio) ------------------------------------------------------------- test cases |randread |read |randwrite |write | ------------------------------------------------------------- base |8015 |113811 |67442 |106978 ------------------------------------------------------------- base+loop aio |8136 |125040 |67811 |111376 ------------------------------------------------------------- - somehow, it should be caused by more page cache avaiable for application or one extra page copy is avoided in case of direct I/O 3) context switch - context switch decreased by ~50% with loop direct I/O(aio) compared with loop buffered I/O(4.2-rc6-next-20150814) 4) memory usage from /proc/meminfo ------------------------------------------------------------- | Buffers | Cached ------------------------------------------------------------- base | > 760MB | ~950MB ------------------------------------------------------------- base+loop direct I/O(aio) | < 5MB | ~1.6GB ------------------------------------------------------------- - so there are much more page caches available for application with direct I/O [1] https://lwn.net/Articles/612483/ Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-17 10:31:51 +08:00
/* complete non-aio request */
if (!cmd->use_aio || ret) {
if (ret == -EOPNOTSUPP)
cmd->ret = ret;
else
cmd->ret = ret ? -EIO : 0;
if (likely(!blk_should_fake_timeout(rq->q)))
blk_mq_complete_request(rq);
}
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
}
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
static void loop_set_timer(struct loop_device *lo)
{
timer_reduce(&lo->timer, jiffies + LOOP_IDLE_WORKER_TIMEOUT);
}
static void loop_process_work(struct loop_worker *worker,
struct list_head *cmd_list, struct loop_device *lo)
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
{
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
int orig_flags = current->flags;
struct loop_cmd *cmd;
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
current->flags |= PF_LOCAL_THROTTLE | PF_MEMALLOC_NOIO;
spin_lock_irq(&lo->lo_work_lock);
while (!list_empty(cmd_list)) {
cmd = container_of(
cmd_list->next, struct loop_cmd, list_entry);
list_del(cmd_list->next);
spin_unlock_irq(&lo->lo_work_lock);
loop_handle_cmd(cmd);
cond_resched();
spin_lock_irq(&lo->lo_work_lock);
}
/*
* We only add to the idle list if there are no pending cmds
* *and* the worker will not run again which ensures that it
* is safe to free any worker on the idle list
*/
if (worker && !work_pending(&worker->work)) {
worker->last_ran_at = jiffies;
list_add_tail(&worker->idle_list, &lo->idle_worker_list);
loop_set_timer(lo);
}
spin_unlock_irq(&lo->lo_work_lock);
current->flags = orig_flags;
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
}
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
static void loop_workfn(struct work_struct *work)
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
{
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
struct loop_worker *worker =
container_of(work, struct loop_worker, work);
loop_process_work(worker, &worker->cmd_list, worker->lo);
}
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
static void loop_rootcg_workfn(struct work_struct *work)
{
struct loop_device *lo =
container_of(work, struct loop_device, rootcg_work);
loop_process_work(NULL, &lo->rootcg_cmd_list, lo);
}
static void loop_free_idle_workers(struct timer_list *timer)
{
struct loop_device *lo = container_of(timer, struct loop_device, timer);
struct loop_worker *pos, *worker;
spin_lock_irq(&lo->lo_work_lock);
list_for_each_entry_safe(worker, pos, &lo->idle_worker_list,
idle_list) {
if (time_is_after_jiffies(worker->last_ran_at +
LOOP_IDLE_WORKER_TIMEOUT))
break;
list_del(&worker->idle_list);
rb_erase(&worker->rb_node, &lo->worker_tree);
css_put(worker->blkcg_css);
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
kfree(worker);
}
if (!list_empty(&lo->idle_worker_list))
loop_set_timer(lo);
spin_unlock_irq(&lo->lo_work_lock);
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
}
static const struct blk_mq_ops loop_mq_ops = {
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
.queue_rq = loop_queue_rq,
.complete = lo_complete_rq,
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
};
static int loop_add(int i)
{
struct loop_device *lo;
struct gendisk *disk;
int err;
err = -ENOMEM;
lo = kzalloc(sizeof(*lo), GFP_KERNEL);
if (!lo)
goto out;
loop: fix crash when using unassigned loop device When the loop module is loaded, it creates 8 loop devices /dev/loop[0-7]. The devices have no request routine and thus, when they are used without being assigned, a crash happens. For example, these commands cause crash (assuming there are no used loop devices): Kernel Fault: Code=26 regs=000000007f420980 (Addr=0000000000000010) CPU: 1 PID: 50 Comm: kworker/1:1 Not tainted 3.11.0 #1 Workqueue: ksnaphd do_metadata [dm_snapshot] task: 000000007fcf4078 ti: 000000007f420000 task.ti: 000000007f420000 [ 116.319988] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001001111111100001111 Not tainted r00-03 000000ff0804ff0f 00000000408bf5d0 00000000402d8204 000000007b7ff6c0 r04-07 00000000408a95d0 000000007f420950 000000007b7ff6c0 000000007d06c930 r08-11 000000007f4205c0 0000000000000001 000000007f4205c0 000000007f4204b8 r12-15 0000000000000010 0000000000000000 0000000000000000 0000000000000000 r16-19 000000001108dd48 000000004061cd7c 000000007d859800 000000000800000f r20-23 0000000000000000 0000000000000008 0000000000000000 0000000000000000 r24-27 00000000ffffffff 000000007b7ff6c0 000000007d859800 00000000408a95d0 r28-31 0000000000000000 000000007f420950 000000007f420980 000000007f4208e8 sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000303000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 117.549988] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d82fc 00000000402d8300 IIR: 53820020 ISR: 0000000000000000 IOR: 0000000000000010 CPU: 1 CR30: 000000007f420000 CR31: ffffffffffffffff ORIG_R28: 0000000000000001 IAOQ[0]: generic_make_request+0x11c/0x1a0 IAOQ[1]: generic_make_request+0x120/0x1a0 RP(r2): generic_make_request+0x24/0x1a0 Backtrace: [<00000000402d83f0>] submit_bio+0x70/0x140 [<0000000011087c4c>] dispatch_io+0x234/0x478 [dm_mod] [<0000000011087f44>] sync_io+0xb4/0x190 [dm_mod] [<00000000110883bc>] dm_io+0x2c4/0x310 [dm_mod] [<00000000110bfcd0>] do_metadata+0x28/0xb0 [dm_snapshot] [<00000000401591d8>] process_one_work+0x160/0x460 [<0000000040159bc0>] worker_thread+0x300/0x478 [<0000000040161a70>] kthread+0x118/0x128 [<0000000040104020>] end_fault_vector+0x20/0x28 [<0000000040177220>] task_tick_fair+0x420/0x4d0 [<00000000401aa048>] invoke_rcu_core+0x50/0x60 [<00000000401ad5b8>] rcu_check_callbacks+0x210/0x8d8 [<000000004014aaa0>] update_process_times+0xa8/0xc0 [<00000000401ab86c>] rcu_process_callbacks+0x4b4/0x598 [<0000000040142408>] __do_softirq+0x250/0x2c0 [<00000000401789d0>] find_busiest_group+0x3c0/0xc70 [ 119.379988] Kernel panic - not syncing: Kernel Fault Rebooting in 1 seconds.. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-16 04:14:38 +08:00
lo->lo_state = Lo_unbound;
err = mutex_lock_killable(&loop_ctl_mutex);
if (err)
goto out_free_dev;
/* allocate id, if @id >= 0, we're requesting that specific id */
if (i >= 0) {
err = idr_alloc(&loop_index_idr, lo, i, i + 1, GFP_KERNEL);
if (err == -ENOSPC)
err = -EEXIST;
} else {
err = idr_alloc(&loop_index_idr, lo, 0, 0, GFP_KERNEL);
}
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
mutex_unlock(&loop_ctl_mutex);
if (err < 0)
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
goto out_free_dev;
i = err;
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
lo->tag_set.ops = &loop_mq_ops;
lo->tag_set.nr_hw_queues = 1;
lo->tag_set.queue_depth = 128;
lo->tag_set.numa_node = NUMA_NO_NODE;
lo->tag_set.cmd_size = sizeof(struct loop_cmd);
lo->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_STACKING |
BLK_MQ_F_NO_SCHED_BY_DEFAULT;
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
lo->tag_set.driver_data = lo;
err = blk_mq_alloc_tag_set(&lo->tag_set);
if (err)
loop: fix crash if blk_alloc_queue fails loop: fix crash if blk_alloc_queue fails If blk_alloc_queue fails, loop_add cleans up, but it doesn't clean up the identifier allocated with idr_alloc. That causes crash on module unload in idr_for_each(&loop_index_idr, &loop_exit_cb, NULL); where we attempt to remove non-existed device with that id. BUG: unable to handle kernel NULL pointer dereference at 0000000000000380 IP: [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 PGD 43d399067 PUD 43d0ad067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: loop(-) dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_powersave spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc lm85 hwmon_vid snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq ohci_hcd freq_table tg3 ehci_pci mperf ehci_hcd kvm_amd kvm sata_svw serverworks libphy libata ide_core k10temp usbcore hwmon microcode ptp pcspkr pps_core e100 skge mii usb_common i2c_piix4 floppy evdev rtc_cmos i2c_core processor but! ton unix CPU: 7 PID: 2735 Comm: rmmod Tainted: G W 3.10.15-devel #15 Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009 task: ffff88043d38e780 ti: ffff88043d21e000 task.ti: ffff88043d21e000 RIP: 0010:[<ffffffff812057c9>] [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 RSP: 0018:ffff88043d21fe10 EFLAGS: 00010282 RAX: ffffffffa05102e0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88043ea82800 RDI: 0000000000000000 RBP: ffff88043d21fe48 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000ff R13: 0000000000000080 R14: 0000000000000000 R15: ffff88043ea82800 FS: 00007ff646534700(0000) GS:ffff880447000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000380 CR3: 000000043e9bf000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffff8100aba4 0000000000000092 ffff88043d21fe48 ffff88043ea82800 00000000000000ff ffff88043d21fe98 0000000000000000 ffff88043d21fe60 ffffffffa05102b4 0000000000000000 ffff88043d21fe70 ffffffffa05102ec Call Trace: [<ffffffff8100aba4>] ? native_sched_clock+0x24/0x80 [<ffffffffa05102b4>] loop_remove+0x14/0x40 [loop] [<ffffffffa05102ec>] loop_exit_cb+0xc/0x10 [loop] [<ffffffff81217b74>] idr_for_each+0x104/0x190 [<ffffffffa05102e0>] ? loop_remove+0x40/0x40 [loop] [<ffffffff8109adc5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffffa05135dc>] loop_exit+0x34/0xa58 [loop] [<ffffffff810a98ea>] SyS_delete_module+0x13a/0x260 [<ffffffff81221d5e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f Code: f0 4c 8b 6d f8 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 4c 8d af 80 00 00 00 41 54 53 48 89 fb 48 83 ec 18 <48> 83 bf 80 03 00 00 00 74 4d e8 98 fe ff ff 31 f6 48 c7 c7 20 RIP [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 RSP <ffff88043d21fe10> CR2: 0000000000000380 ---[ end trace 64ec069ec70f1309 ]--- Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org # 3.1+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-15 00:12:24 +08:00
goto out_free_idr;
disk = lo->lo_disk = blk_mq_alloc_disk(&lo->tag_set, lo);
if (IS_ERR(disk)) {
err = PTR_ERR(disk);
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
goto out_cleanup_tags;
}
lo->lo_queue = lo->lo_disk->queue;
loop: fix crash when using unassigned loop device When the loop module is loaded, it creates 8 loop devices /dev/loop[0-7]. The devices have no request routine and thus, when they are used without being assigned, a crash happens. For example, these commands cause crash (assuming there are no used loop devices): Kernel Fault: Code=26 regs=000000007f420980 (Addr=0000000000000010) CPU: 1 PID: 50 Comm: kworker/1:1 Not tainted 3.11.0 #1 Workqueue: ksnaphd do_metadata [dm_snapshot] task: 000000007fcf4078 ti: 000000007f420000 task.ti: 000000007f420000 [ 116.319988] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001001111111100001111 Not tainted r00-03 000000ff0804ff0f 00000000408bf5d0 00000000402d8204 000000007b7ff6c0 r04-07 00000000408a95d0 000000007f420950 000000007b7ff6c0 000000007d06c930 r08-11 000000007f4205c0 0000000000000001 000000007f4205c0 000000007f4204b8 r12-15 0000000000000010 0000000000000000 0000000000000000 0000000000000000 r16-19 000000001108dd48 000000004061cd7c 000000007d859800 000000000800000f r20-23 0000000000000000 0000000000000008 0000000000000000 0000000000000000 r24-27 00000000ffffffff 000000007b7ff6c0 000000007d859800 00000000408a95d0 r28-31 0000000000000000 000000007f420950 000000007f420980 000000007f4208e8 sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000303000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 117.549988] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d82fc 00000000402d8300 IIR: 53820020 ISR: 0000000000000000 IOR: 0000000000000010 CPU: 1 CR30: 000000007f420000 CR31: ffffffffffffffff ORIG_R28: 0000000000000001 IAOQ[0]: generic_make_request+0x11c/0x1a0 IAOQ[1]: generic_make_request+0x120/0x1a0 RP(r2): generic_make_request+0x24/0x1a0 Backtrace: [<00000000402d83f0>] submit_bio+0x70/0x140 [<0000000011087c4c>] dispatch_io+0x234/0x478 [dm_mod] [<0000000011087f44>] sync_io+0xb4/0x190 [dm_mod] [<00000000110883bc>] dm_io+0x2c4/0x310 [dm_mod] [<00000000110bfcd0>] do_metadata+0x28/0xb0 [dm_snapshot] [<00000000401591d8>] process_one_work+0x160/0x460 [<0000000040159bc0>] worker_thread+0x300/0x478 [<0000000040161a70>] kthread+0x118/0x128 [<0000000040104020>] end_fault_vector+0x20/0x28 [<0000000040177220>] task_tick_fair+0x420/0x4d0 [<00000000401aa048>] invoke_rcu_core+0x50/0x60 [<00000000401ad5b8>] rcu_check_callbacks+0x210/0x8d8 [<000000004014aaa0>] update_process_times+0xa8/0xc0 [<00000000401ab86c>] rcu_process_callbacks+0x4b4/0x598 [<0000000040142408>] __do_softirq+0x250/0x2c0 [<00000000401789d0>] find_busiest_group+0x3c0/0xc70 [ 119.379988] Kernel panic - not syncing: Kernel Fault Rebooting in 1 seconds.. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-16 04:14:38 +08:00
blk_queue_max_hw_sectors(lo->lo_queue, BLK_DEF_MAX_SECTORS);
/*
* By default, we do buffer IO, so it doesn't make sense to enable
* merge because the I/O submitted to backing file is handled page by
* page. For directio mode, merge does help to dispatch bigger request
* to underlayer disk. We will enable merge once directio is enabled.
*/
blk_queue_flag_set(QUEUE_FLAG_NOMERGES, lo->lo_queue);
2011-08-24 02:12:04 +08:00
/*
* Disable partition scanning by default. The in-kernel partition
* scanning can be requested individually per-device during its
* setup. Userspace can always add and remove partitions from all
* devices. The needed partition minors are allocated from the
* extended minor space, the main loop device numbers will continue
* to match the loop minors, regardless of the number of partitions
* used.
*
* If max_part is given, partition scanning is globally enabled for
* all loop devices. The minors for the main loop devices will be
* multiples of max_part.
*
* Note: Global-for-all-devices, set-only-at-init, read-only module
* parameteters like 'max_loop' and 'max_part' make things needlessly
* complicated, are too static, inflexible and may surprise
* userspace tools. Parameters like this in general should be avoided.
*/
if (!part_shift)
disk->flags |= GENHD_FL_NO_PART;
atomic_set(&lo->lo_refcnt, 0);
mutex_init(&lo->lo_mutex);
lo->lo_number = i;
spin_lock_init(&lo->lo_lock);
loop: use worker per cgroup instead of kworker Patch series "Charge loop device i/o to issuing cgroup", v14. The loop device runs all i/o to the backing file on a separate kworker thread which results in all i/o being charged to the root cgroup. This allows a loop device to be used to trivially bypass resource limits and other policy. This patch series fixes this gap in accounting. A simple script to demonstrate this behavior on cgroupv2 machine: ''' #!/bin/bash set -e CGROUP=/sys/fs/cgroup/test.slice LOOP_DEV=/dev/loop0 if [[ ! -d $CGROUP ]] then sudo mkdir $CGROUP fi grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit to tmpfs -> OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; dd if=/dev/zero of=/tmp/file bs=1M count=256" || true grep oom_kill $CGROUP/memory.events # Set a memory limit, write more than that limit through loopback # device -> no OOM kill sudo unshare -m bash -c " echo \$\$ > $CGROUP/cgroup.procs; echo 0 > $CGROUP/memory.swap.max; echo 64M > $CGROUP/memory.max; mount -t tmpfs -o size=512m tmpfs /tmp; truncate -s 512m /tmp/backing_file losetup $LOOP_DEV /tmp/backing_file dd if=/dev/zero of=$LOOP_DEV bs=1M count=256; losetup -D $LOOP_DEV" || true grep oom_kill $CGROUP/memory.events ''' Naively charging cgroups could result in priority inversions through the single kworker thread in the case where multiple cgroups are reading/writing to the same loop device. This patch series does some minor modification to the loop driver so that each cgroup can make forward progress independently to avoid this inversion. With this patch series applied, the above script triggers OOM kills when writing through the loop device as expected. This patch (of 3): Existing uses of loop device may have multiple cgroups reading/writing to the same device. Simply charging resources for I/O to the backing file could result in priority inversion where one cgroup gets synchronously blocked, holding up all other I/O to the loop device. In order to avoid this priority inversion, we use a single workqueue where each work item is a "struct loop_worker" which contains a queue of struct loop_cmds to issue. The loop device maintains a tree mapping blk css_id -> loop_worker. This allows each cgroup to independently make forward progress issuing I/O to the backing file. There is also a single queue for I/O associated with the rootcg which can be used in cases of extreme memory shortage where we cannot allocate a loop_worker. The locking for the tree and queues is fairly heavy handed - we acquire a per-loop-device spinlock any time either is accessed. The existing implementation serializes all I/O through a single thread anyways, so I don't believe this is any worse. [colin.king@canonical.com: fixes] Link: https://lkml.kernel.org/r/20210610173944.1203706-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20210610173944.1203706-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:38:15 +08:00
spin_lock_init(&lo->lo_work_lock);
disk->major = LOOP_MAJOR;
loop: manage partitions in disk image This patch allows to use loop device with partitionned disk image. Original behavior of loop is not modified. A new parameter is introduced to define how many partition we want to be able to manage per loop device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: # modprobe loop max_part=63 # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 And to attach a raw partitionned disk image, the original losetup is used: # losetup -f etch.img # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 1 2008-03-05 14:57 /dev/loop0p1 brw-rw---- 1 root disk 7, 2 2008-03-05 14:57 /dev/loop0p2 brw-rw---- 1 root disk 7, 5 2008-03-05 14:57 /dev/loop0p5 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 # mount /dev/loop0p1 /mnt # ls /mnt bench cdrom home lib mnt root srv usr bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz # umount /mnt # losetup -d /dev/loop0 Of course, the same behavior can be done using kpartx on a loop device, but modifying loop avoids to stack several layers of block device (loop + device mapper), this is a very light modification (40% of modifications are to manage the new parameter). Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-26 19:11:53 +08:00
disk->first_minor = i << part_shift;
disk->minors = 1 << part_shift;
disk->fops = &lo_fops;
disk->private_data = lo;
disk->queue = lo->lo_queue;
disk->events = DISK_EVENT_MEDIA_CHANGE;
disk->event_flags = DISK_EVENT_FLAG_UEVENT;
sprintf(disk->disk_name, "loop%d", i);
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
/* Make this loop device reachable from pathname. */
err = add_disk(disk);
if (err)
goto out_cleanup_disk;
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
/* Show this loop device. */
mutex_lock(&loop_ctl_mutex);
lo->idr_visible = true;
mutex_unlock(&loop_ctl_mutex);
return i;
out_cleanup_disk:
blk_cleanup_disk(disk);
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
out_cleanup_tags:
blk_mq_free_tag_set(&lo->tag_set);
loop: fix crash if blk_alloc_queue fails loop: fix crash if blk_alloc_queue fails If blk_alloc_queue fails, loop_add cleans up, but it doesn't clean up the identifier allocated with idr_alloc. That causes crash on module unload in idr_for_each(&loop_index_idr, &loop_exit_cb, NULL); where we attempt to remove non-existed device with that id. BUG: unable to handle kernel NULL pointer dereference at 0000000000000380 IP: [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 PGD 43d399067 PUD 43d0ad067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: loop(-) dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_powersave spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc lm85 hwmon_vid snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq ohci_hcd freq_table tg3 ehci_pci mperf ehci_hcd kvm_amd kvm sata_svw serverworks libphy libata ide_core k10temp usbcore hwmon microcode ptp pcspkr pps_core e100 skge mii usb_common i2c_piix4 floppy evdev rtc_cmos i2c_core processor but! ton unix CPU: 7 PID: 2735 Comm: rmmod Tainted: G W 3.10.15-devel #15 Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009 task: ffff88043d38e780 ti: ffff88043d21e000 task.ti: ffff88043d21e000 RIP: 0010:[<ffffffff812057c9>] [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 RSP: 0018:ffff88043d21fe10 EFLAGS: 00010282 RAX: ffffffffa05102e0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88043ea82800 RDI: 0000000000000000 RBP: ffff88043d21fe48 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000ff R13: 0000000000000080 R14: 0000000000000000 R15: ffff88043ea82800 FS: 00007ff646534700(0000) GS:ffff880447000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000380 CR3: 000000043e9bf000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffff8100aba4 0000000000000092 ffff88043d21fe48 ffff88043ea82800 00000000000000ff ffff88043d21fe98 0000000000000000 ffff88043d21fe60 ffffffffa05102b4 0000000000000000 ffff88043d21fe70 ffffffffa05102ec Call Trace: [<ffffffff8100aba4>] ? native_sched_clock+0x24/0x80 [<ffffffffa05102b4>] loop_remove+0x14/0x40 [loop] [<ffffffffa05102ec>] loop_exit_cb+0xc/0x10 [loop] [<ffffffff81217b74>] idr_for_each+0x104/0x190 [<ffffffffa05102e0>] ? loop_remove+0x40/0x40 [loop] [<ffffffff8109adc5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffffa05135dc>] loop_exit+0x34/0xa58 [loop] [<ffffffff810a98ea>] SyS_delete_module+0x13a/0x260 [<ffffffff81221d5e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f Code: f0 4c 8b 6d f8 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 4c 8d af 80 00 00 00 41 54 53 48 89 fb 48 83 ec 18 <48> 83 bf 80 03 00 00 00 74 4d e8 98 fe ff ff 31 f6 48 c7 c7 20 RIP [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 RSP <ffff88043d21fe10> CR2: 0000000000000380 ---[ end trace 64ec069ec70f1309 ]--- Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org # 3.1+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-15 00:12:24 +08:00
out_free_idr:
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
mutex_lock(&loop_ctl_mutex);
loop: fix crash if blk_alloc_queue fails loop: fix crash if blk_alloc_queue fails If blk_alloc_queue fails, loop_add cleans up, but it doesn't clean up the identifier allocated with idr_alloc. That causes crash on module unload in idr_for_each(&loop_index_idr, &loop_exit_cb, NULL); where we attempt to remove non-existed device with that id. BUG: unable to handle kernel NULL pointer dereference at 0000000000000380 IP: [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 PGD 43d399067 PUD 43d0ad067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: loop(-) dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_powersave spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc lm85 hwmon_vid snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq ohci_hcd freq_table tg3 ehci_pci mperf ehci_hcd kvm_amd kvm sata_svw serverworks libphy libata ide_core k10temp usbcore hwmon microcode ptp pcspkr pps_core e100 skge mii usb_common i2c_piix4 floppy evdev rtc_cmos i2c_core processor but! ton unix CPU: 7 PID: 2735 Comm: rmmod Tainted: G W 3.10.15-devel #15 Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009 task: ffff88043d38e780 ti: ffff88043d21e000 task.ti: ffff88043d21e000 RIP: 0010:[<ffffffff812057c9>] [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 RSP: 0018:ffff88043d21fe10 EFLAGS: 00010282 RAX: ffffffffa05102e0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88043ea82800 RDI: 0000000000000000 RBP: ffff88043d21fe48 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000ff R13: 0000000000000080 R14: 0000000000000000 R15: ffff88043ea82800 FS: 00007ff646534700(0000) GS:ffff880447000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000380 CR3: 000000043e9bf000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffff8100aba4 0000000000000092 ffff88043d21fe48 ffff88043ea82800 00000000000000ff ffff88043d21fe98 0000000000000000 ffff88043d21fe60 ffffffffa05102b4 0000000000000000 ffff88043d21fe70 ffffffffa05102ec Call Trace: [<ffffffff8100aba4>] ? native_sched_clock+0x24/0x80 [<ffffffffa05102b4>] loop_remove+0x14/0x40 [loop] [<ffffffffa05102ec>] loop_exit_cb+0xc/0x10 [loop] [<ffffffff81217b74>] idr_for_each+0x104/0x190 [<ffffffffa05102e0>] ? loop_remove+0x40/0x40 [loop] [<ffffffff8109adc5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffffa05135dc>] loop_exit+0x34/0xa58 [loop] [<ffffffff810a98ea>] SyS_delete_module+0x13a/0x260 [<ffffffff81221d5e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f Code: f0 4c 8b 6d f8 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 4c 8d af 80 00 00 00 41 54 53 48 89 fb 48 83 ec 18 <48> 83 bf 80 03 00 00 00 74 4d e8 98 fe ff ff 31 f6 48 c7 c7 20 RIP [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 RSP <ffff88043d21fe10> CR2: 0000000000000380 ---[ end trace 64ec069ec70f1309 ]--- Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org # 3.1+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-15 00:12:24 +08:00
idr_remove(&loop_index_idr, i);
mutex_unlock(&loop_ctl_mutex);
out_free_dev:
kfree(lo);
out:
return err;
}
static void loop_remove(struct loop_device *lo)
{
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
/* Make this loop device unreachable from pathname. */
block: destroy bdi before blockdev is unregistered. Because of the peculiar way that md devices are created (automatically when the device node is opened), a new device can be created and registered immediately after the blk_unregister_region(disk_devt(disk), disk->minors); call in del_gendisk(). Therefore it is important that all visible artifacts of the previous device are removed before this call. In particular, the 'bdi'. Since: commit c4db59d31e39ea067c32163ac961e9c80198fd37 Author: Christoph Hellwig <hch@lst.de> fs: don't reassign dirty inodes to default_backing_dev_info moved the device_unregister(bdi->dev); call from bdi_unregister() to bdi_destroy() it has been quite easy to lose a race and have a new (e.g.) "md127" be created after the blk_unregister_region() call and before bdi_destroy() is ultimately called by the final 'put_disk', which must come after del_gendisk(). The new device finds that the bdi name is already registered in sysfs and complains > [ 9627.630029] WARNING: CPU: 18 PID: 3330 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5a/0x70() > [ 9627.630032] sysfs: cannot create duplicate filename '/devices/virtual/bdi/9:127' We can fix this by moving the bdi_destroy() call out of blk_release_queue() (which can happen very late when a refcount reaches zero) and into blk_cleanup_queue() - which happens exactly when the md device driver calls it. Then it is only necessary for md to call blk_cleanup_queue() before del_gendisk(). As loop.c devices are also created on demand by opening the device node, we make the same change there. Fixes: c4db59d31e39ea067c32163ac961e9c80198fd37 Reported-by: Azat Khuzhin <a3at.mail@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org (v4.0) Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-27 12:12:22 +08:00
del_gendisk(lo->lo_disk);
blk_cleanup_disk(lo->lo_disk);
block: loop: improve performance via blk-mq The conversion is a bit straightforward, and use work queue to dispatch requests of loop block, and one big change is that requests is submitted to backend file/device concurrently with work queue, so throughput may get improved much. Given write requests over same file are often run exclusively, so don't handle them concurrently for avoiding extra context switch cost, possible lock contention and work schedule cost. Also with blk-mq, there is opportunity to get loop I/O merged before submitting to backend file/device. In the following test: - base: v3.19-rc2-2041231 - loop over file in ext4 file system on SSD disk - bs: 4k, libaio, io depth: 64, O_DIRECT, num of jobs: 1 - throughput: IOPS ------------------------------------------------------ | | base | base with loop-mq | delta | ------------------------------------------------------ | randread | 1740 | 25318 | +1355%| ------------------------------------------------------ | read | 42196 | 51771 | +22.6%| ----------------------------------------------------- | randwrite | 35709 | 34624 | -3% | ----------------------------------------------------- | write | 39137 | 40326 | +3% | ----------------------------------------------------- So loop-mq can improve throughput for both read and randread, meantime, performance of write and randwrite isn't hurted basically. Another benefit is that loop driver code gets simplified much after blk-mq conversion, and the patch can be thought as cleanup too. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-31 21:22:57 +08:00
blk_mq_free_tag_set(&lo->tag_set);
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
mutex_lock(&loop_ctl_mutex);
idr_remove(&loop_index_idr, lo->lo_number);
mutex_unlock(&loop_ctl_mutex);
/* There is no route which can find this loop device. */
mutex_destroy(&lo->lo_mutex);
kfree(lo);
}
static void loop_probe(dev_t dev)
{
int idx = MINOR(dev) >> part_shift;
if (max_loop && idx >= max_loop)
return;
loop_add(idx);
}
static int loop_control_remove(int idx)
{
struct loop_device *lo;
int ret;
if (idx < 0) {
pr_warn_once("deleting an unspecified loop device is not supported.\n");
return -EINVAL;
}
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
/* Hide this loop device for serialization. */
ret = mutex_lock_killable(&loop_ctl_mutex);
if (ret)
return ret;
lo = idr_find(&loop_index_idr, idx);
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
if (!lo || !lo->idr_visible)
ret = -ENODEV;
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
else
lo->idr_visible = false;
mutex_unlock(&loop_ctl_mutex);
if (ret)
return ret;
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
/* Check whether this loop device can be removed. */
ret = mutex_lock_killable(&lo->lo_mutex);
if (ret)
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
goto mark_visible;
if (lo->lo_state != Lo_unbound ||
atomic_read(&lo->lo_refcnt) > 0) {
mutex_unlock(&lo->lo_mutex);
ret = -EBUSY;
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
goto mark_visible;
}
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
/* Mark this loop device no longer open()-able. */
lo->lo_state = Lo_deleting;
mutex_unlock(&lo->lo_mutex);
loop_remove(lo);
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
return 0;
mark_visible:
/* Show this loop device again. */
mutex_lock(&loop_ctl_mutex);
lo->idr_visible = true;
mutex_unlock(&loop_ctl_mutex);
return ret;
}
static int loop_control_get_free(int idx)
loop: add management interface for on-demand device allocation Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-01 04:08:04 +08:00
{
struct loop_device *lo;
int id, ret;
loop: add management interface for on-demand device allocation Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-01 04:08:04 +08:00
ret = mutex_lock_killable(&loop_ctl_mutex);
if (ret)
return ret;
idr_for_each_entry(&loop_index_idr, lo, id) {
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
/* Hitting a race results in creating a new loop device which is harmless. */
if (lo->idr_visible && data_race(lo->lo_state) == Lo_unbound)
goto found;
}
mutex_unlock(&loop_ctl_mutex);
return loop_add(-1);
found:
mutex_unlock(&loop_ctl_mutex);
return id;
}
static long loop_control_ioctl(struct file *file, unsigned int cmd,
unsigned long parm)
{
loop: add management interface for on-demand device allocation Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-01 04:08:04 +08:00
switch (cmd) {
case LOOP_CTL_ADD:
return loop_add(parm);
loop: add management interface for on-demand device allocation Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-01 04:08:04 +08:00
case LOOP_CTL_REMOVE:
return loop_control_remove(parm);
loop: add management interface for on-demand device allocation Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-01 04:08:04 +08:00
case LOOP_CTL_GET_FREE:
return loop_control_get_free(parm);
default:
return -ENOSYS;
loop: add management interface for on-demand device allocation Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-01 04:08:04 +08:00
}
}
static const struct file_operations loop_ctl_fops = {
.open = nonseekable_open,
.unlocked_ioctl = loop_control_ioctl,
.compat_ioctl = loop_control_ioctl,
.owner = THIS_MODULE,
.llseek = noop_llseek,
};
static struct miscdevice loop_misc = {
.minor = LOOP_CTRL_MINOR,
.name = "loop-control",
.fops = &loop_ctl_fops,
};
MODULE_ALIAS_MISCDEV(LOOP_CTRL_MINOR);
MODULE_ALIAS("devname:loop-control");
static int __init loop_init(void)
{
int i, nr;
loop: add management interface for on-demand device allocation Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-01 04:08:04 +08:00
int err;
loop: manage partitions in disk image This patch allows to use loop device with partitionned disk image. Original behavior of loop is not modified. A new parameter is introduced to define how many partition we want to be able to manage per loop device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: # modprobe loop max_part=63 # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 And to attach a raw partitionned disk image, the original losetup is used: # losetup -f etch.img # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 1 2008-03-05 14:57 /dev/loop0p1 brw-rw---- 1 root disk 7, 2 2008-03-05 14:57 /dev/loop0p2 brw-rw---- 1 root disk 7, 5 2008-03-05 14:57 /dev/loop0p5 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 # mount /dev/loop0p1 /mnt # ls /mnt bench cdrom home lib mnt root srv usr bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz # umount /mnt # losetup -d /dev/loop0 Of course, the same behavior can be done using kpartx on a loop device, but modifying loop avoids to stack several layers of block device (loop + device mapper), this is a very light modification (40% of modifications are to manage the new parameter). Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-26 19:11:53 +08:00
part_shift = 0;
if (max_part > 0) {
loop: manage partitions in disk image This patch allows to use loop device with partitionned disk image. Original behavior of loop is not modified. A new parameter is introduced to define how many partition we want to be able to manage per loop device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: # modprobe loop max_part=63 # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 And to attach a raw partitionned disk image, the original losetup is used: # losetup -f etch.img # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 1 2008-03-05 14:57 /dev/loop0p1 brw-rw---- 1 root disk 7, 2 2008-03-05 14:57 /dev/loop0p2 brw-rw---- 1 root disk 7, 5 2008-03-05 14:57 /dev/loop0p5 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 # mount /dev/loop0p1 /mnt # ls /mnt bench cdrom home lib mnt root srv usr bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz # umount /mnt # losetup -d /dev/loop0 Of course, the same behavior can be done using kpartx on a loop device, but modifying loop avoids to stack several layers of block device (loop + device mapper), this is a very light modification (40% of modifications are to manage the new parameter). Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-26 19:11:53 +08:00
part_shift = fls(max_part);
/*
* Adjust max_part according to part_shift as it is exported
* to user space so that user can decide correct minor number
* if [s]he want to create more devices.
*
* Note that -1 is required because partition 0 is reserved
* for the whole disk.
*/
max_part = (1UL << part_shift) - 1;
}
if ((1UL << part_shift) > DISK_MAX_PARTS) {
err = -EINVAL;
goto err_out;
}
loop: limit 'max_part' module param to DISK_MAX_PARTS The 'max_part' parameter controls the number of maximum partition a loop block device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe loop max_part0000 ------------[ cut here ]------------ kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: loop(+) Pid: 43, comm: insmod Tainted: G W 2.6.39-qemu+ #155 Bochs Bochs RIP: 0010:[<ffffffff8113ce61>] [<ffffffff8113ce61>] internal_create_group= +0x2a/0x170 RSP: 0018:ffff880007b3fde8 EFLAGS: 00000246 RAX: 00000000ffffffef RBX: ffff880007b3d878 RCX: 00000000000007b4 RDX: ffffffff8152da50 RSI: 0000000000000000 RDI: ffff880007b3d878 RBP: ffff880007b3fe38 R08: ffff880007b3fde8 R09: 0000000000000000 R10: ffff88000783b4a8 R11: ffff880007b3d878 R12: ffffffff8152da50 R13: ffff880007b3d868 R14: 0000000000000000 R15: ffff880007b3d800 FS: 0000000002137880(0063) GS:ffff880007c00000(0000) knlGS:00000000000000= 00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000422680 CR3: 0000000007b50000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 43, threadinfo ffff880007b3e000, task ffff880007afb9c= 0) Stack: ffff880007b3fe58 ffffffff811e66dd ffff880007b3fe58 ffffffff811e570b 0000000000000010 ffff880007b3d800 ffff880007a7b390 ffff880007b3d868 0000000000400920 ffff880007b3d800 ffff880007b3fe48 ffffffff8113cfc8 Call Trace: [<ffffffff811e66dd>] ? device_add+0x4bc/0x5af [<ffffffff811e570b>] ? dev_set_name+0x3c/0x3e [<ffffffff8113cfc8>] sysfs_create_group+0xe/0x12 [<ffffffff810b420e>] blk_trace_init_sysfs+0x14/0x16 [<ffffffff8116a090>] blk_register_queue+0x47/0xf7 [<ffffffff8116f527>] add_disk+0xdf/0x290 [<ffffffffa00060eb>] loop_init+0xeb/0x1b8 [loop] [<ffffffffa0006000>] ? 0xffffffffa0005fff [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e [<ffffffff81096804>] sys_init_module+0x9c/0x1e0 [<ffffffff813329bb>] system_call_fastpath+0x16/0x1b Code: c3 55 48 89 e5 41 57 41 56 41 89 f6 41 55 41 54 49 89 d4 53 48 89 fb= 48 83 ec 28 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe = 48 83 7f 30 00 b9 ea ff ff ff 0f 84 18 01 00 00 49 RIP [<ffffffff8113ce61>] internal_create_group+0x2a/0x170 RSP <ffff880007b3fde8> ---[ end trace a123eb592043acad ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-24 22:48:54 +08:00
if (max_loop > 1UL << (MINORBITS - part_shift)) {
err = -EINVAL;
goto err_out;
}
/*
* If max_loop is specified, create that many devices upfront.
* This also becomes a hard limit. If max_loop is not specified,
* create CONFIG_BLK_DEV_LOOP_MIN_COUNT loop devices at module
* init time. Loop devices can be requested on-demand with the
* /dev/loop-control interface, or be instantiated by accessing
* a 'dead' device node.
*/
if (max_loop)
nr = max_loop;
else
nr = CONFIG_BLK_DEV_LOOP_MIN_COUNT;
err = misc_register(&loop_misc);
if (err < 0)
goto err_out;
if (__register_blkdev(LOOP_MAJOR, "loop", loop_probe)) {
err = -EIO;
goto misc_out;
}
/* pre-create number of devices given by config or max_loop */
for (i = 0; i < nr; i++)
loop_add(i);
printk(KERN_INFO "loop: module loaded\n");
return 0;
misc_out:
misc_deregister(&loop_misc);
err_out:
return err;
}
static void __exit loop_exit(void)
{
struct loop_device *lo;
int id;
unregister_blkdev(LOOP_MAJOR, "loop");
loop: add management interface for on-demand device allocation Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-01 04:08:04 +08:00
misc_deregister(&loop_misc);
loop: reduce the loop_ctl_mutex scope syzbot is reporting circular locking problem at __loop_clr_fd() [1], for commit a160c6159d4a0cf8 ("block: add an optional probe callback to major_names") is calling the module's probe function with major_names_lock held. Fortunately, since commit 990e78116d38059c ("block: loop: fix deadlock between open and remove") stopped holding loop_ctl_mutex in lo_open(), current role of loop_ctl_mutex is to serialize access to loop_index_idr and loop_add()/loop_remove(); in other words, management of id for IDR. To avoid holding loop_ctl_mutex during whole add/remove operation, use a bool flag to indicate whether the loop device is ready for use. loop_unregister_transfer() which is called from cleanup_cryptoloop() currently has possibility of use-after-free problem due to lack of serialization between kfree() from loop_remove() from loop_control_remove() and mutex_lock() from unregister_transfer_cb(). But since lo->lo_encryption should be already NULL when this function is called due to module unload, and commit 222013f9ac30b9ce ("cryptoloop: add a deprecation warning") indicates that we will remove this function shortly, this patch updates this function to emit warning instead of checking lo->lo_encryption. Holding loop_ctl_mutex in loop_exit() is pointless, for all users must close /dev/loop-control and /dev/loop$num (in order to drop module's refcount to 0) before loop_exit() starts, and nobody can open /dev/loop-control or /dev/loop$num afterwards. Link: https://syzkaller.appspot.com/bug?id=7bb10e8b62f83e4d445cdf4c13d69e407e629558 [1] Reported-by: syzbot <syzbot+f61766d5763f9e7a118f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/adb1e792-fc0e-ee81-7ea0-0906fc36419d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02 08:07:35 +08:00
/*
* There is no need to use loop_ctl_mutex here, for nobody else can
* access loop_index_idr when this module is unloading (unless forced
* module unloading is requested). If this is not a clean unloading,
* we have no means to avoid kernel crash.
*/
idr_for_each_entry(&loop_index_idr, lo, id)
loop_remove(lo);
idr_destroy(&loop_index_idr);
}
module_init(loop_init);
module_exit(loop_exit);
#ifndef MODULE
static int __init max_loop_setup(char *str)
{
max_loop = simple_strtol(str, NULL, 0);
return 1;
}
__setup("max_loop=", max_loop_setup);
#endif