OpenCloudOS-Kernel/arch/powerpc/mm/hash_low_64.S

959 lines
25 KiB
ArmAsm
Raw Normal View History

/*
* ppc64 MMU hashtable management routines
*
* (c) Copyright IBM Corp. 2003, 2005
*
* Maintained by: Benjamin Herrenschmidt
* <benh@kernel.crashing.org>
*
* This file is covered by the GNU Public Licence v2 as
* described in the kernel's COPYING file.
*/
#include <asm/reg.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/page.h>
#include <asm/types.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
.text
/*
* Stackframe:
*
* +-> Back chain (SP + 256)
* | General register save area (SP + 112)
* | Parameter save area (SP + 48)
* | TOC save area (SP + 40)
* | link editor doubleword (SP + 32)
* | compiler doubleword (SP + 24)
* | LR save area (SP + 16)
* | CR save area (SP + 8)
* SP ---> +-- Back chain (SP + 0)
*/
#define STACKFRAMESIZE 256
/* Save parameters offsets */
#define STK_PARM(i) (STACKFRAMESIZE + 48 + ((i)-3)*8)
/* Save non-volatile offsets */
#define STK_REG(i) (112 + ((i)-14)*8)
#ifndef CONFIG_PPC_64K_PAGES
/*****************************************************************************
* *
* 4K SW & 4K HW pages implementation *
* *
*****************************************************************************/
/*
* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
* pte_t *ptep, unsigned long trap, int local, int ssize)
*
* Adds a 4K page to the hash table in a segment of 4K pages only
*/
_GLOBAL(__hash_page_4K)
mflr r0
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
std r6,STK_PARM(r6)(r1)
std r8,STK_PARM(r8)(r1)
std r9,STK_PARM(r9)(r1)
/* Add _PAGE_PRESENT to access */
ori r4,r4,_PAGE_PRESENT
/* Save non-volatile registers.
* r31 will hold "old PTE"
* r30 is "new PTE"
* r29 is "va"
* r28 is a hash value
* r27 is hashtab mask (maybe dynamic patched instead ?)
*/
std r27,STK_REG(r27)(r1)
std r28,STK_REG(r28)(r1)
std r29,STK_REG(r29)(r1)
std r30,STK_REG(r30)(r1)
std r31,STK_REG(r31)(r1)
/* Step 1:
*
* Check permissions, atomically mark the linux PTE busy
* and hashed.
*/
1:
ldarx r31,0,r6
/* Check access rights (access & ~(pte_val(*ptep))) */
andc. r0,r4,r31
bne- htab_wrong_access
/* Check if PTE is busy */
andi. r0,r31,_PAGE_BUSY
/* If so, just bail out and refault if needed. Someone else
* is changing this PTE anyway and might hash it.
*/
bne- htab_bail_ok
/* Prepare new PTE value (turn access RW into DIRTY, then
* add BUSY,HASHPTE and ACCESSED)
*/
rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */
or r30,r30,r31
ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
/* Write the linux PTE atomically (setting busy) */
stdcx. r30,0,r6
bne- 1b
isync
/* Step 2:
*
* Insert/Update the HPTE in the hash table. At this point,
* r4 (access) is re-useable, we use it for the new HPTE flags
*/
BEGIN_FTR_SECTION
cmpdi r9,0 /* check segment size */
bne 3f
END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
/* Calc va and put it in r29 */
rldicr r29,r5,28,63-28
rldicl r3,r3,0,36
or r29,r3,r29
/* Calculate hash value for primary slot and store it in r28 */
rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */
rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */
xor r28,r5,r0
b 4f
3: /* Calc VA and hash in r29 and r28 for 1T segment */
sldi r29,r5,40 /* vsid << 40 */
clrldi r3,r3,24 /* ea & 0xffffffffff */
rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */
clrldi r5,r5,40 /* vsid & 0xffffff */
rldicl r0,r3,64-12,36 /* (ea >> 12) & 0xfffffff */
xor r28,r28,r5
or r29,r3,r29 /* VA */
xor r28,r28,r0 /* hash */
/* Convert linux PTE bits into HW equivalents */
4: andi. r3,r30,0x1fe /* Get basic set of flags */
xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */
rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */
rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */
and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
andc r0,r30,r0 /* r0 = pte & ~r0 */
rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
ori r3,r3,HPTE_R_C /* Always add "C" bit for perf. */
/* We eventually do the icache sync here (maybe inline that
* code rather than call a C function...)
*/
BEGIN_FTR_SECTION
mr r4,r30
mr r5,r7
bl .hash_page_do_lazy_icache
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
std r3,STK_PARM(r4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
ld r27,0(r4) /* htab_hash_mask -> r27 */
/* Check if we may already be in the hashtable, in this case, we
* go to out-of-line code to try to modify the HPTE
*/
andi. r0,r31,_PAGE_HASHPTE
bne htab_modify_pte
htab_insert_pte:
/* Clear hpte bits in new pte (we also clear BUSY btw) and
* add _PAGE_HASHPTE
*/
lis r0,_PAGE_HPTEFLAGS@h
ori r0,r0,_PAGE_HPTEFLAGS@l
andc r30,r30,r0
ori r30,r30,_PAGE_HASHPTE
/* physical address r5 */
rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
sldi r5,r5,PAGE_SHIFT
/* Calculate primary group hash */
and r0,r28,r27
rldicr r3,r0,3,63-3 /* r3 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
mr r4,r29 /* Retreive va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_4K /* page size */
ld r9,STK_PARM(r9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert1)
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
bge htab_pte_insert_ok /* Insertion successful */
cmpdi 0,r3,-2 /* Critical failure */
beq- htab_pte_insert_failure
/* Now try secondary slot */
/* physical address r5 */
rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
sldi r5,r5,PAGE_SHIFT
/* Calculate secondary group hash */
andc r0,r27,r28
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
mr r4,r29 /* Retreive va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_4K /* page size */
ld r9,STK_PARM(r9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert2)
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
bge+ htab_pte_insert_ok /* Insertion successful */
cmpdi 0,r3,-2 /* Critical failure */
beq- htab_pte_insert_failure
/* Both are full, we need to evict something */
mftb r0
/* Pick a random group based on TB */
andi. r0,r0,1
mr r5,r28
bne 2f
not r5,r5
2: and r0,r5,r27
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_remove */
_GLOBAL(htab_call_hpte_remove)
bl . /* Patched by htab_finish_init() */
/* Try all again */
b htab_insert_pte
htab_bail_ok:
li r3,0
b htab_bail
htab_pte_insert_ok:
/* Insert slot number & secondary bit in PTE */
rldimi r30,r3,12,63-15
/* Write out the PTE with a normal write
* (maybe add eieio may be good still ?)
*/
htab_write_out_pte:
ld r6,STK_PARM(r6)(r1)
std r30,0(r6)
li r3, 0
htab_bail:
ld r27,STK_REG(r27)(r1)
ld r28,STK_REG(r28)(r1)
ld r29,STK_REG(r29)(r1)
ld r30,STK_REG(r30)(r1)
ld r31,STK_REG(r31)(r1)
addi r1,r1,STACKFRAMESIZE
ld r0,16(r1)
mtlr r0
blr
htab_modify_pte:
/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
mr r4,r3
rlwinm r3,r31,32-12,29,31
/* Secondary group ? if yes, get a inverted hash value */
mr r5,r28
andi. r0,r31,_PAGE_SECONDARY
beq 1f
not r5,r5
1:
/* Calculate proper slot value for ppc_md.hpte_updatepp */
and r0,r5,r27
rldicr r0,r0,3,63-3 /* r0 = (hash & mask) << 3 */
add r3,r0,r3 /* add slot idx */
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_4K /* page size */
ld r7,STK_PARM(r9)(r1) /* segment size */
ld r8,STK_PARM(r8)(r1) /* get "local" param */
_GLOBAL(htab_call_hpte_updatepp)
bl . /* Patched by htab_finish_init() */
/* if we failed because typically the HPTE wasn't really here
* we try an insertion.
*/
cmpdi 0,r3,-1
beq- htab_insert_pte
/* Clear the BUSY bit and Write out the PTE */
li r0,_PAGE_BUSY
andc r30,r30,r0
b htab_write_out_pte
htab_wrong_access:
/* Bail out clearing reservation */
stdcx. r31,0,r6
li r3,1
b htab_bail
htab_pte_insert_failure:
/* Bail out restoring old PTE */
ld r6,STK_PARM(r6)(r1)
std r31,0(r6)
li r3,-1
b htab_bail
#else /* CONFIG_PPC_64K_PAGES */
/*****************************************************************************
* *
* 64K SW & 4K or 64K HW in a 4K segment pages implementation *
* *
*****************************************************************************/
/* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-24 05:35:13 +08:00
* pte_t *ptep, unsigned long trap, int local, int ssize,
* int subpg_prot)
*/
/*
* For now, we do NOT implement Admixed pages
*/
_GLOBAL(__hash_page_4K)
mflr r0
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
std r6,STK_PARM(r6)(r1)
std r8,STK_PARM(r8)(r1)
std r9,STK_PARM(r9)(r1)
/* Add _PAGE_PRESENT to access */
ori r4,r4,_PAGE_PRESENT
/* Save non-volatile registers.
* r31 will hold "old PTE"
* r30 is "new PTE"
* r29 is "va"
* r28 is a hash value
* r27 is hashtab mask (maybe dynamic patched instead ?)
* r26 is the hidx mask
* r25 is the index in combo page
*/
std r25,STK_REG(r25)(r1)
std r26,STK_REG(r26)(r1)
std r27,STK_REG(r27)(r1)
std r28,STK_REG(r28)(r1)
std r29,STK_REG(r29)(r1)
std r30,STK_REG(r30)(r1)
std r31,STK_REG(r31)(r1)
/* Step 1:
*
* Check permissions, atomically mark the linux PTE busy
* and hashed.
*/
1:
ldarx r31,0,r6
/* Check access rights (access & ~(pte_val(*ptep))) */
andc. r0,r4,r31
bne- htab_wrong_access
/* Check if PTE is busy */
andi. r0,r31,_PAGE_BUSY
/* If so, just bail out and refault if needed. Someone else
* is changing this PTE anyway and might hash it.
*/
bne- htab_bail_ok
/* Prepare new PTE value (turn access RW into DIRTY, then
* add BUSY and ACCESSED)
*/
rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */
or r30,r30,r31
ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 08:45:18 +08:00
oris r30,r30,_PAGE_COMBO@h
/* Write the linux PTE atomically (setting busy) */
stdcx. r30,0,r6
bne- 1b
isync
/* Step 2:
*
* Insert/Update the HPTE in the hash table. At this point,
* r4 (access) is re-useable, we use it for the new HPTE flags
*/
/* Load the hidx index */
rldicl r25,r3,64-12,60
BEGIN_FTR_SECTION
cmpdi r9,0 /* check segment size */
bne 3f
END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
/* Calc va and put it in r29 */
rldicr r29,r5,28,63-28 /* r29 = (vsid << 28) */
rldicl r3,r3,0,36 /* r3 = (ea & 0x0fffffff) */
or r29,r3,r29 /* r29 = va */
/* Calculate hash value for primary slot and store it in r28 */
rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */
rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */
xor r28,r5,r0
b 4f
3: /* Calc VA and hash in r29 and r28 for 1T segment */
sldi r29,r5,40 /* vsid << 40 */
clrldi r3,r3,24 /* ea & 0xffffffffff */
rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */
clrldi r5,r5,40 /* vsid & 0xffffff */
rldicl r0,r3,64-12,36 /* (ea >> 12) & 0xfffffff */
xor r28,r28,r5
or r29,r3,r29 /* VA */
xor r28,r28,r0 /* hash */
/* Convert linux PTE bits into HW equivalents */
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-24 05:35:13 +08:00
4:
#ifdef CONFIG_PPC_SUBPAGE_PROT
andc r10,r30,r10
andi. r3,r10,0x1fe /* Get basic set of flags */
rlwinm r0,r10,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */
#else
andi. r3,r30,0x1fe /* Get basic set of flags */
rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-24 05:35:13 +08:00
#endif
xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */
rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */
and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-24 05:35:13 +08:00
andc r0,r3,r0 /* r0 = pte & ~r0 */
rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
ori r3,r3,HPTE_R_C /* Always add "C" bit for perf. */
/* We eventually do the icache sync here (maybe inline that
* code rather than call a C function...)
*/
BEGIN_FTR_SECTION
mr r4,r30
mr r5,r7
bl .hash_page_do_lazy_icache
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
std r3,STK_PARM(r4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
ld r27,0(r4) /* htab_hash_mask -> r27 */
/* Check if we may already be in the hashtable, in this case, we
* go to out-of-line code to try to modify the HPTE. We look for
* the bit at (1 >> (index + 32))
*/
rldicl. r0,r31,64-12,48
li r26,0 /* Default hidx */
beq htab_insert_pte
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 08:45:18 +08:00
/*
* Check if the pte was already inserted into the hash table
* as a 64k HW page, and invalidate the 64k HPTE if so.
*/
andis. r0,r31,_PAGE_COMBO@h
beq htab_inval_old_hpte
ld r6,STK_PARM(r6)(r1)
ori r26,r6,0x8000 /* Load the hidx mask */
ld r26,0(r26)
addi r5,r25,36 /* Check actual HPTE_SUB bit, this */
rldcr. r0,r31,r5,0 /* must match pgtable.h definition */
bne htab_modify_pte
htab_insert_pte:
/* real page number in r5, PTE RPN value + index */
[POWERPC] Allow drivers to map individual 4k pages to userspace Some drivers have resources that they want to be able to map into userspace that are 4k in size. On a kernel configured with 64k pages we currently end up mapping the 4k we want plus another 60k of physical address space, which could contain anything. This can introduce security problems, for example in the case of an infiniband adaptor where the other 60k could contain registers that some other program is using for its communications. This patch adds a new function, remap_4k_pfn, which drivers can use to map a single 4k page to userspace regardless of whether the kernel is using a 4k or a 64k page size. Like remap_pfn_range, it would typically be called in a driver's mmap function. It only maps a single 4k page, which on a 64k page kernel appears replicated 16 times throughout a 64k page. On a 4k page kernel it reduces to a call to remap_pfn_range. The way this works on a 64k kernel is that a new bit, _PAGE_4K_PFN, gets set on the linux PTE. This alters the way that __hash_page_4K computes the real address to put in the HPTE. The RPN field of the linux PTE becomes the 4k RPN directly rather than being interpreted as a 64k RPN. Since the RPN field is 32 bits, this means that physical addresses being mapped with remap_4k_pfn have to be below 2^44, i.e. 0x100000000000. The patch also factors out the code in arch/powerpc/mm/hash_utils_64.c that deals with demoting a process to use 4k pages into one function that gets called in the various different places where we need to do that. There were some discrepancies between exactly what was done in the various places, such as a call to spu_flush_all_slbs in one case but not in others. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 19:24:02 +08:00
andis. r0,r31,_PAGE_4K_PFN@h
srdi r5,r31,PTE_RPN_SHIFT
bne- htab_special_pfn
sldi r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT
add r5,r5,r25
[POWERPC] Allow drivers to map individual 4k pages to userspace Some drivers have resources that they want to be able to map into userspace that are 4k in size. On a kernel configured with 64k pages we currently end up mapping the 4k we want plus another 60k of physical address space, which could contain anything. This can introduce security problems, for example in the case of an infiniband adaptor where the other 60k could contain registers that some other program is using for its communications. This patch adds a new function, remap_4k_pfn, which drivers can use to map a single 4k page to userspace regardless of whether the kernel is using a 4k or a 64k page size. Like remap_pfn_range, it would typically be called in a driver's mmap function. It only maps a single 4k page, which on a 64k page kernel appears replicated 16 times throughout a 64k page. On a 4k page kernel it reduces to a call to remap_pfn_range. The way this works on a 64k kernel is that a new bit, _PAGE_4K_PFN, gets set on the linux PTE. This alters the way that __hash_page_4K computes the real address to put in the HPTE. The RPN field of the linux PTE becomes the 4k RPN directly rather than being interpreted as a 64k RPN. Since the RPN field is 32 bits, this means that physical addresses being mapped with remap_4k_pfn have to be below 2^44, i.e. 0x100000000000. The patch also factors out the code in arch/powerpc/mm/hash_utils_64.c that deals with demoting a process to use 4k pages into one function that gets called in the various different places where we need to do that. There were some discrepancies between exactly what was done in the various places, such as a call to spu_flush_all_slbs in one case but not in others. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 19:24:02 +08:00
htab_special_pfn:
sldi r5,r5,HW_PAGE_SHIFT
/* Calculate primary group hash */
and r0,r28,r27
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
mr r4,r29 /* Retreive va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_4K /* page size */
ld r9,STK_PARM(r9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert1)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge htab_pte_insert_ok /* Insertion successful */
cmpdi 0,r3,-2 /* Critical failure */
beq- htab_pte_insert_failure
/* Now try secondary slot */
/* real page number in r5, PTE RPN value + index */
andis. r0,r31,_PAGE_4K_PFN@h
srdi r5,r31,PTE_RPN_SHIFT
bne- 3f
sldi r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT
add r5,r5,r25
3: sldi r5,r5,HW_PAGE_SHIFT
/* Calculate secondary group hash */
andc r0,r27,r28
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
mr r4,r29 /* Retreive va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_4K /* page size */
ld r9,STK_PARM(r9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert2)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge+ htab_pte_insert_ok /* Insertion successful */
cmpdi 0,r3,-2 /* Critical failure */
beq- htab_pte_insert_failure
/* Both are full, we need to evict something */
mftb r0
/* Pick a random group based on TB */
andi. r0,r0,1
mr r5,r28
bne 2f
not r5,r5
2: and r0,r5,r27
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_remove */
_GLOBAL(htab_call_hpte_remove)
bl . /* patched by htab_finish_init() */
/* Try all again */
b htab_insert_pte
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 08:45:18 +08:00
/*
* Call out to C code to invalidate an 64k HW HPTE that is
* useless now that the segment has been switched to 4k pages.
*/
htab_inval_old_hpte:
mr r3,r29 /* virtual addr */
mr r4,r31 /* PTE.pte */
li r5,0 /* PTE.hidx */
li r6,MMU_PAGE_64K /* psize */
ld r7,STK_PARM(r9)(r1) /* ssize */
ld r8,STK_PARM(r8)(r1) /* local */
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 08:45:18 +08:00
bl .flush_hash_page
/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
lis r0,_PAGE_HPTE_SUB@h
ori r0,r0,_PAGE_HPTE_SUB@l
andc r30,r30,r0
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 08:45:18 +08:00
b htab_insert_pte
htab_bail_ok:
li r3,0
b htab_bail
htab_pte_insert_ok:
/* Insert slot number & secondary bit in PTE second half,
* clear _PAGE_BUSY and set approriate HPTE slot bit
*/
ld r6,STK_PARM(r6)(r1)
li r0,_PAGE_BUSY
andc r30,r30,r0
/* HPTE SUB bit */
li r0,1
subfic r5,r25,27 /* Must match bit position in */
sld r0,r0,r5 /* pgtable.h */
or r30,r30,r0
/* hindx */
sldi r5,r25,2
sld r3,r3,r5
li r4,0xf
sld r4,r4,r5
andc r26,r26,r4
or r26,r26,r3
ori r5,r6,0x8000
std r26,0(r5)
lwsync
std r30,0(r6)
li r3, 0
htab_bail:
ld r25,STK_REG(r25)(r1)
ld r26,STK_REG(r26)(r1)
ld r27,STK_REG(r27)(r1)
ld r28,STK_REG(r28)(r1)
ld r29,STK_REG(r29)(r1)
ld r30,STK_REG(r30)(r1)
ld r31,STK_REG(r31)(r1)
addi r1,r1,STACKFRAMESIZE
ld r0,16(r1)
mtlr r0
blr
htab_modify_pte:
/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
mr r4,r3
sldi r5,r25,2
srd r3,r26,r5
/* Secondary group ? if yes, get a inverted hash value */
mr r5,r28
andi. r0,r3,0x8 /* page secondary ? */
beq 1f
not r5,r5
1: andi. r3,r3,0x7 /* extract idx alone */
/* Calculate proper slot value for ppc_md.hpte_updatepp */
and r0,r5,r27
rldicr r0,r0,3,63-3 /* r0 = (hash & mask) << 3 */
add r3,r0,r3 /* add slot idx */
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_4K /* page size */
ld r7,STK_PARM(r9)(r1) /* segment size */
ld r8,STK_PARM(r8)(r1) /* get "local" param */
_GLOBAL(htab_call_hpte_updatepp)
bl . /* patched by htab_finish_init() */
/* if we failed because typically the HPTE wasn't really here
* we try an insertion.
*/
cmpdi 0,r3,-1
beq- htab_insert_pte
/* Clear the BUSY bit and Write out the PTE */
li r0,_PAGE_BUSY
andc r30,r30,r0
ld r6,STK_PARM(r6)(r1)
std r30,0(r6)
li r3,0
b htab_bail
htab_wrong_access:
/* Bail out clearing reservation */
stdcx. r31,0,r6
li r3,1
b htab_bail
htab_pte_insert_failure:
/* Bail out restoring old PTE */
ld r6,STK_PARM(r6)(r1)
std r31,0(r6)
li r3,-1
b htab_bail
#endif /* CONFIG_PPC_64K_PAGES */
#ifdef CONFIG_PPC_HAS_HASH_64K
/*****************************************************************************
* *
* 64K SW & 64K HW in a 64K segment pages implementation *
* *
*****************************************************************************/
_GLOBAL(__hash_page_64K)
mflr r0
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
std r6,STK_PARM(r6)(r1)
std r8,STK_PARM(r8)(r1)
std r9,STK_PARM(r9)(r1)
/* Add _PAGE_PRESENT to access */
ori r4,r4,_PAGE_PRESENT
/* Save non-volatile registers.
* r31 will hold "old PTE"
* r30 is "new PTE"
* r29 is "va"
* r28 is a hash value
* r27 is hashtab mask (maybe dynamic patched instead ?)
*/
std r27,STK_REG(r27)(r1)
std r28,STK_REG(r28)(r1)
std r29,STK_REG(r29)(r1)
std r30,STK_REG(r30)(r1)
std r31,STK_REG(r31)(r1)
/* Step 1:
*
* Check permissions, atomically mark the linux PTE busy
* and hashed.
*/
1:
ldarx r31,0,r6
/* Check access rights (access & ~(pte_val(*ptep))) */
andc. r0,r4,r31
bne- ht64_wrong_access
/* Check if PTE is busy */
andi. r0,r31,_PAGE_BUSY
/* If so, just bail out and refault if needed. Someone else
* is changing this PTE anyway and might hash it.
*/
bne- ht64_bail_ok
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 08:45:18 +08:00
BEGIN_FTR_SECTION
/* Check if PTE has the cache-inhibit bit set */
andi. r0,r31,_PAGE_NO_CACHE
/* If so, bail out and refault as a 4k page */
bne- ht64_bail_ok
END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
/* Prepare new PTE value (turn access RW into DIRTY, then
* add BUSY and ACCESSED)
*/
rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */
or r30,r30,r31
ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED
/* Write the linux PTE atomically (setting busy) */
stdcx. r30,0,r6
bne- 1b
isync
/* Step 2:
*
* Insert/Update the HPTE in the hash table. At this point,
* r4 (access) is re-useable, we use it for the new HPTE flags
*/
BEGIN_FTR_SECTION
cmpdi r9,0 /* check segment size */
bne 3f
END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
/* Calc va and put it in r29 */
rldicr r29,r5,28,63-28
rldicl r3,r3,0,36
or r29,r3,r29
/* Calculate hash value for primary slot and store it in r28 */
rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */
rldicl r0,r3,64-16,52 /* (ea >> 16) & 0xfff */
xor r28,r5,r0
b 4f
3: /* Calc VA and hash in r29 and r28 for 1T segment */
sldi r29,r5,40 /* vsid << 40 */
clrldi r3,r3,24 /* ea & 0xffffffffff */
rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */
clrldi r5,r5,40 /* vsid & 0xffffff */
rldicl r0,r3,64-16,40 /* (ea >> 16) & 0xffffff */
xor r28,r28,r5
or r29,r3,r29 /* VA */
xor r28,r28,r0 /* hash */
/* Convert linux PTE bits into HW equivalents */
4: andi. r3,r30,0x1fe /* Get basic set of flags */
xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */
rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */
rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */
and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
andc r0,r30,r0 /* r0 = pte & ~r0 */
rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
ori r3,r3,HPTE_R_C /* Always add "C" bit for perf. */
/* We eventually do the icache sync here (maybe inline that
* code rather than call a C function...)
*/
BEGIN_FTR_SECTION
mr r4,r30
mr r5,r7
bl .hash_page_do_lazy_icache
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
std r3,STK_PARM(r4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
ld r27,0(r4) /* htab_hash_mask -> r27 */
/* Check if we may already be in the hashtable, in this case, we
* go to out-of-line code to try to modify the HPTE
*/
rldicl. r0,r31,64-12,48
bne ht64_modify_pte
ht64_insert_pte:
/* Clear hpte bits in new pte (we also clear BUSY btw) and
* add _PAGE_HPTE_SUB0
*/
lis r0,_PAGE_HPTEFLAGS@h
ori r0,r0,_PAGE_HPTEFLAGS@l
andc r30,r30,r0
#ifdef CONFIG_PPC_64K_PAGES
oris r30,r30,_PAGE_HPTE_SUB0@h
#else
ori r30,r30,_PAGE_HASHPTE
#endif
/* Phyical address in r5 */
rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
sldi r5,r5,PAGE_SHIFT
/* Calculate primary group hash */
and r0,r28,r27
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
mr r4,r29 /* Retreive va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_64K
ld r9,STK_PARM(r9)(r1) /* segment size */
_GLOBAL(ht64_call_hpte_insert1)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge ht64_pte_insert_ok /* Insertion successful */
cmpdi 0,r3,-2 /* Critical failure */
beq- ht64_pte_insert_failure
/* Now try secondary slot */
/* Phyical address in r5 */
rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
sldi r5,r5,PAGE_SHIFT
/* Calculate secondary group hash */
andc r0,r27,r28
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
mr r4,r29 /* Retreive va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_64K
ld r9,STK_PARM(r9)(r1) /* segment size */
_GLOBAL(ht64_call_hpte_insert2)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge+ ht64_pte_insert_ok /* Insertion successful */
cmpdi 0,r3,-2 /* Critical failure */
beq- ht64_pte_insert_failure
/* Both are full, we need to evict something */
mftb r0
/* Pick a random group based on TB */
andi. r0,r0,1
mr r5,r28
bne 2f
not r5,r5
2: and r0,r5,r27
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_remove */
_GLOBAL(ht64_call_hpte_remove)
bl . /* patched by htab_finish_init() */
/* Try all again */
b ht64_insert_pte
ht64_bail_ok:
li r3,0
b ht64_bail
ht64_pte_insert_ok:
/* Insert slot number & secondary bit in PTE */
rldimi r30,r3,12,63-15
/* Write out the PTE with a normal write
* (maybe add eieio may be good still ?)
*/
ht64_write_out_pte:
ld r6,STK_PARM(r6)(r1)
std r30,0(r6)
li r3, 0
ht64_bail:
ld r27,STK_REG(r27)(r1)
ld r28,STK_REG(r28)(r1)
ld r29,STK_REG(r29)(r1)
ld r30,STK_REG(r30)(r1)
ld r31,STK_REG(r31)(r1)
addi r1,r1,STACKFRAMESIZE
ld r0,16(r1)
mtlr r0
blr
ht64_modify_pte:
/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
mr r4,r3
rlwinm r3,r31,32-12,29,31
/* Secondary group ? if yes, get a inverted hash value */
mr r5,r28
andi. r0,r31,_PAGE_F_SECOND
beq 1f
not r5,r5
1:
/* Calculate proper slot value for ppc_md.hpte_updatepp */
and r0,r5,r27
rldicr r0,r0,3,63-3 /* r0 = (hash & mask) << 3 */
add r3,r0,r3 /* add slot idx */
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_64K
ld r7,STK_PARM(r9)(r1) /* segment size */
ld r8,STK_PARM(r8)(r1) /* get "local" param */
_GLOBAL(ht64_call_hpte_updatepp)
bl . /* patched by htab_finish_init() */
/* if we failed because typically the HPTE wasn't really here
* we try an insertion.
*/
cmpdi 0,r3,-1
beq- ht64_insert_pte
/* Clear the BUSY bit and Write out the PTE */
li r0,_PAGE_BUSY
andc r30,r30,r0
b ht64_write_out_pte
ht64_wrong_access:
/* Bail out clearing reservation */
stdcx. r31,0,r6
li r3,1
b ht64_bail
ht64_pte_insert_failure:
/* Bail out restoring old PTE */
ld r6,STK_PARM(r6)(r1)
std r31,0(r6)
li r3,-1
b ht64_bail
#endif /* CONFIG_PPC_HAS_HASH_64K */
/*****************************************************************************
* *
* Huge pages implementation is in hugetlbpage.c *
* *
*****************************************************************************/