UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/fs/ceph/super.c

1344 lines
33 KiB
C
Raw Normal View History

treewide: Add SPDX license identifier for more missed files Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 20:08:20 +08:00
// SPDX-License-Identifier: GPL-2.0-only
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include <linux/ceph/ceph_debug.h>
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
#include <linux/backing-dev.h>
ceph: clean up fsid mount option Specify the fsid mount option in hex, not via the major/minor u64 hackery we had before. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-01 12:34:01 +08:00
#include <linux/ctype.h>
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
#include <linux/fs.h>
#include <linux/inet.h>
#include <linux/in6.h>
#include <linux/module.h>
#include <linux/mount.h>
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
#include <linux/fs_context.h>
#include <linux/fs_parser.h>
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
#include <linux/sched.h>
#include <linux/seq_file.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
#include <linux/statfs.h>
#include <linux/string.h>
#include "super.h"
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include "mds_client.h"
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
#include "cache.h"
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
libceph: move feature bits to separate header This is simply cleanup that will keep things more closely synced with the userland code. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-07-31 07:23:22 +08:00
#include <linux/ceph/ceph_features.h>
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include <linux/ceph/decode.h>
#include <linux/ceph/mon_client.h>
#include <linux/ceph/auth.h>
#include <linux/ceph/debugfs.h>
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: periodically send perf metrics to MDSes This will send the caps/read/write/metadata metrics to any available MDS once per second, which will be the same as the userland client. It will skip the MDS sessions which don't support the metric collection, as the MDSs will close socket connections when they get an unknown type message. We can disable the metric sending via the disable_send_metrics module parameter. [ jlayton: fix up endianness bug in ceph_mdsc_send_metrics() ] URL: https://tracker.ceph.com/issues/43215 Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-07-16 22:05:57 +08:00
static DEFINE_SPINLOCK(ceph_fsc_lock);
static LIST_HEAD(ceph_fsc_list);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
/*
* Ceph superblock operations
*
* Handle the basics of mounting, unmounting.
*/
/*
* super ops
*/
static void ceph_put_super(struct super_block *s)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(s);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
dout("put_super\n");
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph_mdsc_close_sessions(fsc->mdsc);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
}
static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
{
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18 06:25:59 +08:00
struct ceph_fs_client *fsc = ceph_inode_to_client(d_inode(dentry));
ceph: fix use-after-free in ceph_statfs() KASAN found an UAF in ceph_statfs. This was a one-off bug but looking at the code it looks like the monmap access needs to be protected as it can be modified while we're accessing it. Fix this by protecting the access with the monc->mutex. BUG: KASAN: use-after-free in ceph_statfs+0x21d/0x2c0 Read of size 8 at addr ffff88006844f2e0 by task trinity-c5/304 CPU: 0 PID: 304 Comm: trinity-c5 Not tainted 4.17.0-rc6+ #172 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa5/0x11b ? show_regs_print_info+0x5/0x5 ? kmsg_dump_rewind+0x118/0x118 ? ceph_statfs+0x21d/0x2c0 print_address_description+0x73/0x2b0 ? ceph_statfs+0x21d/0x2c0 kasan_report+0x243/0x360 ceph_statfs+0x21d/0x2c0 ? ceph_umount_begin+0x80/0x80 ? kmem_cache_alloc+0xdf/0x1a0 statfs_by_dentry+0x79/0xb0 vfs_statfs+0x28/0x110 user_statfs+0x8c/0xe0 ? vfs_statfs+0x110/0x110 ? __fdget_raw+0x10/0x10 __se_sys_statfs+0x5d/0xa0 ? user_statfs+0xe0/0xe0 ? mutex_unlock+0x1d/0x40 ? __x64_sys_statfs+0x20/0x30 do_syscall_64+0xee/0x290 ? syscall_return_slowpath+0x1c0/0x1c0 ? page_fault+0x1e/0x30 ? syscall_return_slowpath+0x13c/0x1c0 ? prepare_exit_to_usermode+0xdb/0x140 ? syscall_trace_enter+0x330/0x330 ? __put_user_4+0x1c/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 130: __kmalloc+0x124/0x210 ceph_monmap_decode+0x1c1/0x400 dispatch+0x113/0xd20 ceph_con_workfn+0xa7e/0x44e0 process_one_work+0x5f0/0xa30 worker_thread+0x184/0xa70 kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Freed by task 130: kfree+0xb8/0x210 dispatch+0x15a/0xd20 ceph_con_workfn+0xa7e/0x44e0 process_one_work+0x5f0/0xa30 worker_thread+0x184/0xa70 kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-05-29 01:37:40 +08:00
struct ceph_mon_client *monc = &fsc->client->monc;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
struct ceph_statfs st;
ceph: properly handle statfs on multifs setups ceph_statfs currently stuffs the cluster fsid into the f_fsid field. This was fine when we only had a single filesystem per cluster, but now that we have multiples we need to use something that will vary between them. Change ceph_statfs to xor each 32-bit chunk of the fsid (aka cluster id) into the lower bits of the statfs->f_fsid. Change the lower bits to hold the fscid (filesystem ID within the cluster). That should give us a value that is guaranteed to be unique between filesystems within a cluster, and should minimize the chance of collisions between mounts of different clusters. URL: https://tracker.ceph.com/issues/52812 Reported-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-10-05 23:12:58 +08:00
int i, err;
ceph: more accurate statfs Improve accuracy of statfs reporting for Ceph filesystems comprising exactly one data pool. In this case, the Ceph monitor can now report the space usage for the single data pool instead of the global data for the entire Ceph cluster. Include support for this message in mon_client and leverage it in ceph/super. Signed-off-by: Douglas Fuller <dfuller@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-08-16 22:19:27 +08:00
u64 data_pool;
if (fsc->mdsc->mdsmap->m_num_data_pg_pools == 1) {
data_pool = fsc->mdsc->mdsmap->m_data_pg_pools[0];
} else {
data_pool = CEPH_NOPOOL;
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
dout("statfs\n");
ceph: fix use-after-free in ceph_statfs() KASAN found an UAF in ceph_statfs. This was a one-off bug but looking at the code it looks like the monmap access needs to be protected as it can be modified while we're accessing it. Fix this by protecting the access with the monc->mutex. BUG: KASAN: use-after-free in ceph_statfs+0x21d/0x2c0 Read of size 8 at addr ffff88006844f2e0 by task trinity-c5/304 CPU: 0 PID: 304 Comm: trinity-c5 Not tainted 4.17.0-rc6+ #172 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa5/0x11b ? show_regs_print_info+0x5/0x5 ? kmsg_dump_rewind+0x118/0x118 ? ceph_statfs+0x21d/0x2c0 print_address_description+0x73/0x2b0 ? ceph_statfs+0x21d/0x2c0 kasan_report+0x243/0x360 ceph_statfs+0x21d/0x2c0 ? ceph_umount_begin+0x80/0x80 ? kmem_cache_alloc+0xdf/0x1a0 statfs_by_dentry+0x79/0xb0 vfs_statfs+0x28/0x110 user_statfs+0x8c/0xe0 ? vfs_statfs+0x110/0x110 ? __fdget_raw+0x10/0x10 __se_sys_statfs+0x5d/0xa0 ? user_statfs+0xe0/0xe0 ? mutex_unlock+0x1d/0x40 ? __x64_sys_statfs+0x20/0x30 do_syscall_64+0xee/0x290 ? syscall_return_slowpath+0x1c0/0x1c0 ? page_fault+0x1e/0x30 ? syscall_return_slowpath+0x13c/0x1c0 ? prepare_exit_to_usermode+0xdb/0x140 ? syscall_trace_enter+0x330/0x330 ? __put_user_4+0x1c/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 130: __kmalloc+0x124/0x210 ceph_monmap_decode+0x1c1/0x400 dispatch+0x113/0xd20 ceph_con_workfn+0xa7e/0x44e0 process_one_work+0x5f0/0xa30 worker_thread+0x184/0xa70 kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Freed by task 130: kfree+0xb8/0x210 dispatch+0x15a/0xd20 ceph_con_workfn+0xa7e/0x44e0 process_one_work+0x5f0/0xa30 worker_thread+0x184/0xa70 kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-05-29 01:37:40 +08:00
err = ceph_monc_do_statfs(monc, data_pool, &st);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
if (err < 0)
return err;
/* fill in kstatfs */
buf->f_type = CEPH_SUPER_MAGIC; /* ?? */
/*
* express utilization in terms of large blocks to avoid
* overflow on 32-bit machines.
ceph: fix statvfs fr_size Different versions of glibc are broken in different ways, but the short of it is that for the time being, frsize should == bsize, and be used as the multiple for the blocks, free, and available fields. This mirrors what is done for NFS. The previous reporting of the page size for frsize meant that newer glibc and df would report a very small value for the fs size. Fixes http://tracker.ceph.com/issues/3793. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Greg Farnum <greg@inktank.com>
2013-02-23 07:31:00 +08:00
*
* NOTE: for the time being, we make bsize == frsize to humor
* not-yet-ancient versions of glibc that are broken.
* Someday, we will probably want to report a real block
* size... whatever that may mean for a network file system!
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
*/
buf->f_bsize = 1 << CEPH_BLOCK_SHIFT;
ceph: fix statvfs fr_size Different versions of glibc are broken in different ways, but the short of it is that for the time being, frsize should == bsize, and be used as the multiple for the blocks, free, and available fields. This mirrors what is done for NFS. The previous reporting of the page size for frsize meant that newer glibc and df would report a very small value for the fs size. Fixes http://tracker.ceph.com/issues/3793. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Greg Farnum <greg@inktank.com>
2013-02-23 07:31:00 +08:00
buf->f_frsize = 1 << CEPH_BLOCK_SHIFT;
ceph: quota: report root dir quota usage in statfs This commit changes statfs default behaviour when reporting usage statistics. Instead of using the overall filesystem usage, statfs now reports the quota for the filesystem root, if ceph.quota.max_bytes has been set for this inode. If quota hasn't been set, it falls back to the old statfs behaviour. A new mount option is also added ('noquotadf') to disable this behaviour. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-01-31 18:53:13 +08:00
/*
* By default use root quota for stats; fallback to overall filesystem
* usage if using 'noquotadf' mount option or if the root dir doesn't
* have max_bytes quota set.
*/
if (ceph_test_mount_opt(fsc, NOQUOTADF) ||
!ceph_quota_update_statfs(fsc, buf)) {
buf->f_blocks = le64_to_cpu(st.kb) >> (CEPH_BLOCK_SHIFT-10);
buf->f_bfree = le64_to_cpu(st.kb_avail) >> (CEPH_BLOCK_SHIFT-10);
buf->f_bavail = le64_to_cpu(st.kb_avail) >> (CEPH_BLOCK_SHIFT-10);
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
buf->f_files = le64_to_cpu(st.num_objects);
buf->f_ffree = -1;
ceph: fix f_namelen reported by statfs We were setting f_namelen in kstatfs to PATH_MAX instead of NAME_MAX. That disagrees with ceph_lookup behavior (which checks against NAME_MAX), and also makes the pjd posix test suite spit out ugly errors because with can't clean up its temporary files. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-02 03:51:12 +08:00
buf->f_namelen = NAME_MAX;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: present consistent fsid, regardless of arch endianness Since its inception, ceph has presented the fsid as an opaque value without any sort of endianness conversion. This means that the value presented is different on architectures of different endianness. While the value that should be stuffed into f_fsid is poorly-defined, I think it would be best to strive for consistency here between architectures, and clients (we need to present this properly to the userland client as well). Change ceph_statfs to convert the opaque words to host-endian before doing the xor. On an upgrade, a big-endian box may see a different fsid than it did before, but little-endian arches should see no change with this patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-10-23 22:58:40 +08:00
/* Must convert the fsid, for consistent values across arches */
ceph: properly handle statfs on multifs setups ceph_statfs currently stuffs the cluster fsid into the f_fsid field. This was fine when we only had a single filesystem per cluster, but now that we have multiples we need to use something that will vary between them. Change ceph_statfs to xor each 32-bit chunk of the fsid (aka cluster id) into the lower bits of the statfs->f_fsid. Change the lower bits to hold the fscid (filesystem ID within the cluster). That should give us a value that is guaranteed to be unique between filesystems within a cluster, and should minimize the chance of collisions between mounts of different clusters. URL: https://tracker.ceph.com/issues/52812 Reported-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-10-05 23:12:58 +08:00
buf->f_fsid.val[0] = 0;
ceph: fix use-after-free in ceph_statfs() KASAN found an UAF in ceph_statfs. This was a one-off bug but looking at the code it looks like the monmap access needs to be protected as it can be modified while we're accessing it. Fix this by protecting the access with the monc->mutex. BUG: KASAN: use-after-free in ceph_statfs+0x21d/0x2c0 Read of size 8 at addr ffff88006844f2e0 by task trinity-c5/304 CPU: 0 PID: 304 Comm: trinity-c5 Not tainted 4.17.0-rc6+ #172 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa5/0x11b ? show_regs_print_info+0x5/0x5 ? kmsg_dump_rewind+0x118/0x118 ? ceph_statfs+0x21d/0x2c0 print_address_description+0x73/0x2b0 ? ceph_statfs+0x21d/0x2c0 kasan_report+0x243/0x360 ceph_statfs+0x21d/0x2c0 ? ceph_umount_begin+0x80/0x80 ? kmem_cache_alloc+0xdf/0x1a0 statfs_by_dentry+0x79/0xb0 vfs_statfs+0x28/0x110 user_statfs+0x8c/0xe0 ? vfs_statfs+0x110/0x110 ? __fdget_raw+0x10/0x10 __se_sys_statfs+0x5d/0xa0 ? user_statfs+0xe0/0xe0 ? mutex_unlock+0x1d/0x40 ? __x64_sys_statfs+0x20/0x30 do_syscall_64+0xee/0x290 ? syscall_return_slowpath+0x1c0/0x1c0 ? page_fault+0x1e/0x30 ? syscall_return_slowpath+0x13c/0x1c0 ? prepare_exit_to_usermode+0xdb/0x140 ? syscall_trace_enter+0x330/0x330 ? __put_user_4+0x1c/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 130: __kmalloc+0x124/0x210 ceph_monmap_decode+0x1c1/0x400 dispatch+0x113/0xd20 ceph_con_workfn+0xa7e/0x44e0 process_one_work+0x5f0/0xa30 worker_thread+0x184/0xa70 kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Freed by task 130: kfree+0xb8/0x210 dispatch+0x15a/0xd20 ceph_con_workfn+0xa7e/0x44e0 process_one_work+0x5f0/0xa30 worker_thread+0x184/0xa70 kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-05-29 01:37:40 +08:00
mutex_lock(&monc->mutex);
ceph: properly handle statfs on multifs setups ceph_statfs currently stuffs the cluster fsid into the f_fsid field. This was fine when we only had a single filesystem per cluster, but now that we have multiples we need to use something that will vary between them. Change ceph_statfs to xor each 32-bit chunk of the fsid (aka cluster id) into the lower bits of the statfs->f_fsid. Change the lower bits to hold the fscid (filesystem ID within the cluster). That should give us a value that is guaranteed to be unique between filesystems within a cluster, and should minimize the chance of collisions between mounts of different clusters. URL: https://tracker.ceph.com/issues/52812 Reported-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-10-05 23:12:58 +08:00
for (i = 0 ; i < sizeof(monc->monmap->fsid) / sizeof(__le32) ; ++i)
buf->f_fsid.val[0] ^= le32_to_cpu(((__le32 *)&monc->monmap->fsid)[i]);
ceph: fix use-after-free in ceph_statfs() KASAN found an UAF in ceph_statfs. This was a one-off bug but looking at the code it looks like the monmap access needs to be protected as it can be modified while we're accessing it. Fix this by protecting the access with the monc->mutex. BUG: KASAN: use-after-free in ceph_statfs+0x21d/0x2c0 Read of size 8 at addr ffff88006844f2e0 by task trinity-c5/304 CPU: 0 PID: 304 Comm: trinity-c5 Not tainted 4.17.0-rc6+ #172 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa5/0x11b ? show_regs_print_info+0x5/0x5 ? kmsg_dump_rewind+0x118/0x118 ? ceph_statfs+0x21d/0x2c0 print_address_description+0x73/0x2b0 ? ceph_statfs+0x21d/0x2c0 kasan_report+0x243/0x360 ceph_statfs+0x21d/0x2c0 ? ceph_umount_begin+0x80/0x80 ? kmem_cache_alloc+0xdf/0x1a0 statfs_by_dentry+0x79/0xb0 vfs_statfs+0x28/0x110 user_statfs+0x8c/0xe0 ? vfs_statfs+0x110/0x110 ? __fdget_raw+0x10/0x10 __se_sys_statfs+0x5d/0xa0 ? user_statfs+0xe0/0xe0 ? mutex_unlock+0x1d/0x40 ? __x64_sys_statfs+0x20/0x30 do_syscall_64+0xee/0x290 ? syscall_return_slowpath+0x1c0/0x1c0 ? page_fault+0x1e/0x30 ? syscall_return_slowpath+0x13c/0x1c0 ? prepare_exit_to_usermode+0xdb/0x140 ? syscall_trace_enter+0x330/0x330 ? __put_user_4+0x1c/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 130: __kmalloc+0x124/0x210 ceph_monmap_decode+0x1c1/0x400 dispatch+0x113/0xd20 ceph_con_workfn+0xa7e/0x44e0 process_one_work+0x5f0/0xa30 worker_thread+0x184/0xa70 kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Freed by task 130: kfree+0xb8/0x210 dispatch+0x15a/0xd20 ceph_con_workfn+0xa7e/0x44e0 process_one_work+0x5f0/0xa30 worker_thread+0x184/0xa70 kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-05-29 01:37:40 +08:00
mutex_unlock(&monc->mutex);
ceph: properly handle statfs on multifs setups ceph_statfs currently stuffs the cluster fsid into the f_fsid field. This was fine when we only had a single filesystem per cluster, but now that we have multiples we need to use something that will vary between them. Change ceph_statfs to xor each 32-bit chunk of the fsid (aka cluster id) into the lower bits of the statfs->f_fsid. Change the lower bits to hold the fscid (filesystem ID within the cluster). That should give us a value that is guaranteed to be unique between filesystems within a cluster, and should minimize the chance of collisions between mounts of different clusters. URL: https://tracker.ceph.com/issues/52812 Reported-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-10-05 23:12:58 +08:00
/* fold the fs_cluster_id into the upper bits */
buf->f_fsid.val[1] = monc->fs_cluster_id;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
return 0;
}
ceph: make ->sync_fs not wait if wait==0 The ->sync_fs() super op only needs to wait if wait is true. Otherwise, just get some dirty cap writeback started. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-31 00:38:13 +08:00
static int ceph_sync_fs(struct super_block *sb, int wait)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
ceph: make ->sync_fs not wait if wait==0 The ->sync_fs() super op only needs to wait if wait is true. Otherwise, just get some dirty cap writeback started. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-31 00:38:13 +08:00
if (!wait) {
dout("sync_fs (non-blocking)\n");
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph_flush_dirty_caps(fsc->mdsc);
ceph: make ->sync_fs not wait if wait==0 The ->sync_fs() super op only needs to wait if wait is true. Otherwise, just get some dirty cap writeback started. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-31 00:38:13 +08:00
dout("sync_fs (non-blocking) done\n");
return 0;
}
dout("sync_fs (blocking)\n");
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph_osdc_sync(&fsc->client->osdc);
ceph_mdsc_sync(fsc->mdsc);
ceph: make ->sync_fs not wait if wait==0 The ->sync_fs() super op only needs to wait if wait is true. Otherwise, just get some dirty cap writeback started. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-31 00:38:13 +08:00
dout("sync_fs (blocking) done\n");
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
return 0;
}
/*
* mount options
*/
enum {
Opt_wsize,
Opt_rsize,
ceph: rename rsize -> rasize It controls readahead. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-04 23:03:44 +08:00
Opt_rasize,
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
Opt_caps_wanted_delay_min,
Opt_caps_wanted_delay_max,
ceph: add mount option to limit caps count If number of caps exceed the limit, ceph_trim_dentires() also trim dentries with valid leases. Trimming dentry releases references to associated inode, which may evict inode and release caps. By default, there is no limit for caps count. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-02-01 14:57:15 +08:00
Opt_caps_max,
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
Opt_readdir_max_entries,
ceph: specify max_bytes on readdir replies Specify max bytes in request to bound size of reply. Add associated mount option with default value of 512 KB. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-15 04:06:30 +08:00
Opt_readdir_max_bytes,
ceph: writeback congestion control Set bdi congestion bit when amount of write data in flight exceeds adjustable threshold. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-19 05:51:57 +08:00
Opt_congestion_kb,
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
/* int args above */
Opt_snapdirname,
ceph: mount non-default filesystem by name To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-08 11:25:38 +08:00
Opt_mds_namespace,
ceph: auto reconnect after blacklisted Make client use osd reply and session message to infer if itself is blacklisted. Client reconnect to cluster using new entity addr if it is blacklisted. Auto reconnect is limited to once every 30 minutes. Auto reconnect is disabled by default. It can be enabled/disabled by recover_session=<no|clean> mount option. In 'clean' mode, client drops any dirty data/metadata, invalidates page caches and invalidates all writable file handles. After reconnect, file locks become stale because MDS loses track of them. If an inode contains any stale file locks, read/write on the indoe are not allowed until applications release all stale file locks. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-25 20:16:47 +08:00
Opt_recover_session,
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
Opt_source,
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
/* string args above */
Opt_dirstat,
Opt_rbytes,
ceph: ensure Boolean options support both senses Many ceph-related Boolean options offer the ability to both enable and disable a feature. For all those that don't offer this, add a new option so that they do. Note that ceph_show_options()--which reports mount options currently in effect--only reports the option if it is different from the default value. Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-02-15 21:43:54 +08:00
Opt_asyncreaddir,
ceph: enable/disable dentry complete flags via mount option Enable/disable use of the dentry dir 'complete' flag via a mount option. This lets the admin control whether ceph uses the dcache to satisfy negative lookups or readdir when it has the entire directory contents in its cache. This is purely a performance optimization; correctness is guaranteed whether it is enabled or not. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-11 01:12:55 +08:00
Opt_dcache,
ceph: add ino32 mount option The ino32 mount option forces the ceph fs to report 32 bit ino values. This is useful for 64 bit kernels with 32 bit userspace. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-01-22 08:44:03 +08:00
Opt_ino32,
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
Opt_fscache,
ceph: check OSD caps before read/write Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-27 15:33:28 +08:00
Opt_poolperm,
ceph: check availability of mds cluster on mount Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-10 16:02:06 +08:00
Opt_require_active_mds,
ceph: add acl, noacl options for cephfs mount Make the 'acl' option dependent on having ACL support compiled in. Make the 'noacl' option work even without it so that one can always ask it to be off and not error out on mount when it is not supported. Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Signed-off-by: Sage Weil <sage@inktank.com>
2014-02-17 02:05:29 +08:00
Opt_acl,
ceph: quota: report root dir quota usage in statfs This commit changes statfs default behaviour when reporting usage statistics. Instead of using the overall filesystem usage, statfs now reports the quota for the filesystem root, if ceph.quota.max_bytes has been set for this inode. If quota hasn't been set, it falls back to the old statfs behaviour. A new mount option is also added ('noquotadf') to disable this behaviour. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-01-31 18:53:13 +08:00
Opt_quotadf,
ceph: new mount option to disable usage of copy-from op Add a new mount option 'nocopyfrom' that will prevent the usage of the RADOS 'copy-from' operation in cephfs. This could be useful, for example, for an administrator to temporarily mitigate any possible bugs in the 'copy-from' implementation. Currently, only copy_file_range uses this RADOS operation. Setting this mount option will result in this syscall reverting to the default VFS implementation, i.e. to perform the copies locally instead of doing remote object copies. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-15 23:46:00 +08:00
Opt_copyfrom,
ceph: perform asynchronous unlink if we have sufficient caps The MDS is getting a new lock-caching facility that will allow it to cache the necessary locks to allow asynchronous directory operations. Since the CEPH_CAP_FILE_* caps are currently unused on directories, we can repurpose those bits for this purpose. When performing an unlink, if we have Fx on the parent directory, and CEPH_CAP_DIR_UNLINK (aka Fr), and we know that the dentry being removed is the primary link, then then we can fire off an unlink request immediately and don't need to wait on reply before returning. In that situation, just fix up the dcache and link count and return immediately after issuing the call to the MDS. This does mean that we need to hold an extra reference to the inode being unlinked, and extra references to the caps to avoid races. Those references are put and error handling is done in the r_callback routine. If the operation ends up failing, then set a writeback error on the directory inode, and the inode itself that can be fetched later by an fsync on the dir. The behavior of dir caps is slightly different from caps on normal files. Because these are just considered an optimization, if the session is reconnected, we will not automatically reclaim them. They are instead considered lost until we do another synchronous op in the parent directory. Async dirops are enabled via the "nowsync" mount option, which is patterned after the xfs "wsync" mount option. For now, the default is "wsync", but eventually we may flip that. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-04-03 03:35:56 +08:00
Opt_wsync,
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
};
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
enum ceph_recover_session_mode {
ceph_recover_session_no,
ceph_recover_session_clean
};
fold struct fs_parameter_enum into struct constant_table no real difference now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-17 02:33:32 +08:00
static const struct constant_table ceph_param_recover[] = {
fs_parse: get rid of ->enums Don't do a single array; attach them to fsparam_enum() entry instead. And don't bother trying to embed the names into those - it actually loses memory, with no real speedup worth mentioning. Simplifies validation as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-07 10:12:08 +08:00
{ "no", ceph_recover_session_no },
{ "clean", ceph_recover_session_clean },
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
{}
};
fs_parse: fold fs_parameter_desc/fs_parameter_spec The former contains nothing but a pointer to an array of the latter... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-07 19:23:15 +08:00
static const struct fs_parameter_spec ceph_mount_parameters[] = {
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fsparam_flag_no ("acl", Opt_acl),
fsparam_flag_no ("asyncreaddir", Opt_asyncreaddir),
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
fsparam_s32 ("caps_max", Opt_caps_max),
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fsparam_u32 ("caps_wanted_delay_max", Opt_caps_wanted_delay_max),
fsparam_u32 ("caps_wanted_delay_min", Opt_caps_wanted_delay_min),
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
fsparam_u32 ("write_congestion_kb", Opt_congestion_kb),
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fsparam_flag_no ("copyfrom", Opt_copyfrom),
fsparam_flag_no ("dcache", Opt_dcache),
fsparam_flag_no ("dirstat", Opt_dirstat),
fs_parse: handle optional arguments sanely Don't bother with "mixed" options that would allow both the form with and without argument (i.e. both -o foo and -o foo=bar). Rather than trying to shove both into a single fs_parameter_spec, allow having with-argument and no-argument specs with the same name and teach fs_parse to handle that. There are very few options of that sort, and they are actually easier to handle that way - callers end up with less postprocessing. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-18 09:03:59 +08:00
fsparam_flag_no ("fsc", Opt_fscache), // fsc|nofsc
fsparam_string ("fsc", Opt_fscache), // fsc=...
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fsparam_flag_no ("ino32", Opt_ino32),
fsparam_string ("mds_namespace", Opt_mds_namespace),
fsparam_flag_no ("poolperm", Opt_poolperm),
fsparam_flag_no ("quotadf", Opt_quotadf),
fsparam_u32 ("rasize", Opt_rasize),
fsparam_flag_no ("rbytes", Opt_rbytes),
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
fsparam_u32 ("readdir_max_bytes", Opt_readdir_max_bytes),
fsparam_u32 ("readdir_max_entries", Opt_readdir_max_entries),
fs_parse: get rid of ->enums Don't do a single array; attach them to fsparam_enum() entry instead. And don't bother trying to embed the names into those - it actually loses memory, with no real speedup worth mentioning. Simplifies validation as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-07 10:12:08 +08:00
fsparam_enum ("recover_session", Opt_recover_session, ceph_param_recover),
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fsparam_flag_no ("require_active_mds", Opt_require_active_mds),
fsparam_u32 ("rsize", Opt_rsize),
fsparam_string ("snapdirname", Opt_snapdirname),
fsparam_string ("source", Opt_source),
fsparam_u32 ("wsize", Opt_wsize),
ceph: perform asynchronous unlink if we have sufficient caps The MDS is getting a new lock-caching facility that will allow it to cache the necessary locks to allow asynchronous directory operations. Since the CEPH_CAP_FILE_* caps are currently unused on directories, we can repurpose those bits for this purpose. When performing an unlink, if we have Fx on the parent directory, and CEPH_CAP_DIR_UNLINK (aka Fr), and we know that the dentry being removed is the primary link, then then we can fire off an unlink request immediately and don't need to wait on reply before returning. In that situation, just fix up the dcache and link count and return immediately after issuing the call to the MDS. This does mean that we need to hold an extra reference to the inode being unlinked, and extra references to the caps to avoid races. Those references are put and error handling is done in the r_callback routine. If the operation ends up failing, then set a writeback error on the directory inode, and the inode itself that can be fetched later by an fsync on the dir. The behavior of dir caps is slightly different from caps on normal files. Because these are just considered an optimization, if the session is reconnected, we will not automatically reclaim them. They are instead considered lost until we do another synchronous op in the parent directory. Async dirops are enabled via the "nowsync" mount option, which is patterned after the xfs "wsync" mount option. For now, the default is "wsync", but eventually we may flip that. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-04-03 03:35:56 +08:00
fsparam_flag_no ("wsync", Opt_wsync),
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
{}
};
struct ceph_parse_opts_ctx {
struct ceph_options *copts;
struct ceph_mount_options *opts;
};
ceph: canonicalize server path in place syzbot reported that 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") had caused a regression where an allocation could be done under a spinlock -- compare_mount_options() is called by sget_fc() with sb_lock held. We don't really need the supplied server path, so canonicalize it in place and compare it directly. To make this work, the leading slash is kept around and the logic in ceph_real_mount() to skip it is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e. canonicalized) path, with the leading slash of course. Fixes: 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-02-11 05:51:08 +08:00
/*
* Remove adjacent slashes and then the trailing slash, unless it is
* the only remaining character.
*
* E.g. "//dir1////dir2///" --> "/dir1/dir2", "///" --> "/".
*/
static void canonicalize_path(char *path)
{
int i, j = 0;
for (i = 0; path[i] != '\0'; i++) {
if (path[i] != '/' || j < 1 || path[j - 1] != '/')
path[j++] = path[i];
}
if (j > 1 && path[j - 1] == '/')
j--;
path[j] = '\0';
}
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
/*
* Parse the source parameter. Distinguish the server list from the path.
*
* The source will look like:
* <server_spec>[,<server_spec>...]:[<path>]
* where
* <server_spec> is <ip>[:<port>]
* <path> is optional, but if present must begin with '/'
*/
static int ceph_parse_source(struct fs_parameter *param, struct fs_context *fc)
ceph: clean up fsid mount option Specify the fsid mount option in hex, not via the major/minor u64 hackery we had before. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-01 12:34:01 +08:00
{
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
struct ceph_parse_opts_ctx *pctx = fc->fs_private;
struct ceph_mount_options *fsopt = pctx->opts;
char *dev_name = param->string, *dev_name_end;
int ret;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
dout("%s '%s'\n", __func__, dev_name);
if (!dev_name || !*dev_name)
ceph: use errorfc() and friends instead of spelling the prefix out Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-22 10:31:52 +08:00
return invalfc(fc, "Empty source");
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
dev_name_end = strchr(dev_name, '/');
if (dev_name_end) {
ceph: remove the extra slashes in the server path It's possible to pass the mount helper a server path that has more than one contiguous slash character. For example: $ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/ In the MDS server side the extra slashes of the server path will be treated as snap dir, and then we can get the following debug logs: ceph: mount opening path // ceph: open_root_inode opening '//' ceph: fill_trace 0000000059b8a3bc is_dentry 0 is_target 1 ceph: alloc_inode 00000000dc4ca00b ceph: get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1 ceph: get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b And then when creating any new file or directory under the mount point, we can hit the following BUG_ON in ceph_fill_trace(): BUG_ON(ceph_snap(dir) != dvino.snap); Have the client ignore the extra slashes in the server path when mounting. This will also canonicalize the path, so that identical mounts can be consilidated. 1) "//mydir1///mydir//" 2) "/mydir1/mydir" 3) "/mydir1/mydir/" Regardless of the internal treatment of these paths, the kernel still stores the original string including the leading '/' for presentation to userland. URL: https://tracker.ceph.com/issues/42771 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-20 22:34:04 +08:00
/*
* The server_path will include the whole chars from userland
* including the leading '/'.
*/
ceph: canonicalize server path in place syzbot reported that 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") had caused a regression where an allocation could be done under a spinlock -- compare_mount_options() is called by sget_fc() with sb_lock held. We don't really need the supplied server path, so canonicalize it in place and compare it directly. To make this work, the leading slash is kept around and the logic in ceph_real_mount() to skip it is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e. canonicalized) path, with the leading slash of course. Fixes: 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-02-11 05:51:08 +08:00
kfree(fsopt->server_path);
ceph: remove the extra slashes in the server path It's possible to pass the mount helper a server path that has more than one contiguous slash character. For example: $ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/ In the MDS server side the extra slashes of the server path will be treated as snap dir, and then we can get the following debug logs: ceph: mount opening path // ceph: open_root_inode opening '//' ceph: fill_trace 0000000059b8a3bc is_dentry 0 is_target 1 ceph: alloc_inode 00000000dc4ca00b ceph: get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1 ceph: get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b And then when creating any new file or directory under the mount point, we can hit the following BUG_ON in ceph_fill_trace(): BUG_ON(ceph_snap(dir) != dvino.snap); Have the client ignore the extra slashes in the server path when mounting. This will also canonicalize the path, so that identical mounts can be consilidated. 1) "//mydir1///mydir//" 2) "/mydir1/mydir" 3) "/mydir1/mydir/" Regardless of the internal treatment of these paths, the kernel still stores the original string including the leading '/' for presentation to userland. URL: https://tracker.ceph.com/issues/42771 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-20 22:34:04 +08:00
fsopt->server_path = kstrdup(dev_name_end, GFP_KERNEL);
if (!fsopt->server_path)
return -ENOMEM;
ceph: canonicalize server path in place syzbot reported that 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") had caused a regression where an allocation could be done under a spinlock -- compare_mount_options() is called by sget_fc() with sb_lock held. We don't really need the supplied server path, so canonicalize it in place and compare it directly. To make this work, the leading slash is kept around and the logic in ceph_real_mount() to skip it is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e. canonicalized) path, with the leading slash of course. Fixes: 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-02-11 05:51:08 +08:00
canonicalize_path(fsopt->server_path);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
} else {
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
dev_name_end = dev_name + strlen(dev_name);
ceph: clean up fsid mount option Specify the fsid mount option in hex, not via the major/minor u64 hackery we had before. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-01 12:34:01 +08:00
}
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
dev_name_end--; /* back up to ':' separator */
if (dev_name_end < dev_name || *dev_name_end != ':')
ceph: use errorfc() and friends instead of spelling the prefix out Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-22 10:31:52 +08:00
return invalfc(fc, "No path or : separator in source");
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
dout("device name '%.*s'\n", (int)(dev_name_end - dev_name), dev_name);
if (fsopt->server_path)
dout("server path '%s'\n", fsopt->server_path);
ret = ceph_parse_mon_ips(param->string, dev_name_end - dev_name,
add prefix to fs_context->log ... turning it into struct p_log embedded into fs_context. Initialize the prefix with fs_type->name, turning fs_parse() into a trivial inline wrapper for __fs_parse(). This makes fs_parameter_description->name completely unused. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-21 13:16:49 +08:00
pctx->copts, fc->log.log);
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (ret)
return ret;
fc->source = param->string;
param->string = NULL;
return 0;
}
static int ceph_parse_mount_param(struct fs_context *fc,
struct fs_parameter *param)
{
struct ceph_parse_opts_ctx *pctx = fc->fs_private;
struct ceph_mount_options *fsopt = pctx->opts;
struct fs_parse_result result;
unsigned int mode;
int token, ret;
add prefix to fs_context->log ... turning it into struct p_log embedded into fs_context. Initialize the prefix with fs_type->name, turning fs_parse() into a trivial inline wrapper for __fs_parse(). This makes fs_parameter_description->name completely unused. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-21 13:16:49 +08:00
ret = ceph_parse_param(param, pctx->copts, fc->log.log);
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (ret != -ENOPARAM)
return ret;
fs_parse: fold fs_parameter_desc/fs_parameter_spec The former contains nothing but a pointer to an array of the latter... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-07 19:23:15 +08:00
token = fs_parse(fc, ceph_mount_parameters, param, &result);
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
dout("%s fs_parse '%s' token %d\n", __func__, param->key, token);
if (token < 0)
return token;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
switch (token) {
case Opt_snapdirname:
kfree(fsopt->snapdir_name);
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fsopt->snapdir_name = param->string;
param->string = NULL;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
break;
ceph: multiple filesystem support To access non-default filesystem, we just need to subscribe to mdsmap.<MDS_NAMESPACE_ID> and add a new mount option for mds namespace id. Signed-off-by: Yan, Zheng <zyan@redhat.com> [idryomov@gmail.com: switch to a new libceph API] Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-30 17:18:34 +08:00
case Opt_mds_namespace:
libceph, ceph: avoid memory leak when specifying same option several times When parsing string option, in order to avoid memory leak we need to carefully free it first in case of specifying same option several times. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-06 08:25:55 +08:00
kfree(fsopt->mds_namespace);
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fsopt->mds_namespace = param->string;
param->string = NULL;
ceph: multiple filesystem support To access non-default filesystem, we just need to subscribe to mdsmap.<MDS_NAMESPACE_ID> and add a new mount option for mds namespace id. Signed-off-by: Yan, Zheng <zyan@redhat.com> [idryomov@gmail.com: switch to a new libceph API] Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-30 17:18:34 +08:00
break;
ceph: auto reconnect after blacklisted Make client use osd reply and session message to infer if itself is blacklisted. Client reconnect to cluster using new entity addr if it is blacklisted. Auto reconnect is limited to once every 30 minutes. Auto reconnect is disabled by default. It can be enabled/disabled by recover_session=<no|clean> mount option. In 'clean' mode, client drops any dirty data/metadata, invalidates page caches and invalidates all writable file handles. After reconnect, file locks become stale because MDS loses track of them. If an inode contains any stale file locks, read/write on the indoe are not allowed until applications release all stale file locks. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-25 20:16:47 +08:00
case Opt_recover_session:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
mode = result.uint_32;
if (mode == ceph_recover_session_no)
ceph: auto reconnect after blacklisted Make client use osd reply and session message to infer if itself is blacklisted. Client reconnect to cluster using new entity addr if it is blacklisted. Auto reconnect is limited to once every 30 minutes. Auto reconnect is disabled by default. It can be enabled/disabled by recover_session=<no|clean> mount option. In 'clean' mode, client drops any dirty data/metadata, invalidates page caches and invalidates all writable file handles. After reconnect, file locks become stale because MDS loses track of them. If an inode contains any stale file locks, read/write on the indoe are not allowed until applications release all stale file locks. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-25 20:16:47 +08:00
fsopt->flags &= ~CEPH_MOUNT_OPT_CLEANRECOVER;
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
else if (mode == ceph_recover_session_clean)
ceph: auto reconnect after blacklisted Make client use osd reply and session message to infer if itself is blacklisted. Client reconnect to cluster using new entity addr if it is blacklisted. Auto reconnect is limited to once every 30 minutes. Auto reconnect is disabled by default. It can be enabled/disabled by recover_session=<no|clean> mount option. In 'clean' mode, client drops any dirty data/metadata, invalidates page caches and invalidates all writable file handles. After reconnect, file locks become stale because MDS loses track of them. If an inode contains any stale file locks, read/write on the indoe are not allowed until applications release all stale file locks. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-25 20:16:47 +08:00
fsopt->flags |= CEPH_MOUNT_OPT_CLEANRECOVER;
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
else
BUG();
ceph: new mount option that specifies fscache uniquifier Current ceph uses FSID as primary index key of fscache data. This allows ceph to retain cached data across remount. But this causes problem (kernel opps, fscache does not support sharing data) when a filesystem get mounted several times (with fscache enabled, with different mount options). The fix is adding a new mount option, which specifies uniquifier for fscache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-27 11:57:56 +08:00
break;
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
case Opt_source:
if (fc->source)
ceph: use errorfc() and friends instead of spelling the prefix out Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-22 10:31:52 +08:00
return invalfc(fc, "Multiple sources specified");
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
return ceph_parse_source(param, fc);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
case Opt_wsize:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (result.uint_32 < PAGE_SIZE ||
result.uint_32 > CEPH_MAX_WRITE_SIZE)
goto out_of_range;
fsopt->wsize = ALIGN(result.uint_32, PAGE_SIZE);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
break;
case Opt_rsize:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (result.uint_32 < PAGE_SIZE ||
result.uint_32 > CEPH_MAX_READ_SIZE)
goto out_of_range;
fsopt->rsize = ALIGN(result.uint_32, PAGE_SIZE);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
break;
ceph: rename rsize -> rasize It controls readahead. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-04 23:03:44 +08:00
case Opt_rasize:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fsopt->rasize = ALIGN(result.uint_32, PAGE_SIZE);
ceph: rename rsize -> rasize It controls readahead. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-04 23:03:44 +08:00
break;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
case Opt_caps_wanted_delay_min:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (result.uint_32 < 1)
goto out_of_range;
fsopt->caps_wanted_delay_min = result.uint_32;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
break;
case Opt_caps_wanted_delay_max:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (result.uint_32 < 1)
goto out_of_range;
fsopt->caps_wanted_delay_max = result.uint_32;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
break;
ceph: add mount option to limit caps count If number of caps exceed the limit, ceph_trim_dentires() also trim dentries with valid leases. Trimming dentry releases references to associated inode, which may evict inode and release caps. By default, there is no limit for caps count. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-02-01 14:57:15 +08:00
case Opt_caps_max:
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
if (result.int_32 < 0)
goto out_of_range;
fsopt->caps_max = result.int_32;
ceph: add mount option to limit caps count If number of caps exceed the limit, ceph_trim_dentires() also trim dentries with valid leases. Trimming dentry releases references to associated inode, which may evict inode and release caps. By default, there is no limit for caps count. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-02-01 14:57:15 +08:00
break;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
case Opt_readdir_max_entries:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (result.uint_32 < 1)
goto out_of_range;
fsopt->max_readdir = result.uint_32;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
break;
case Opt_readdir_max_bytes:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (result.uint_32 < PAGE_SIZE && result.uint_32 != 0)
goto out_of_range;
fsopt->max_readdir_bytes = result.uint_32;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
break;
case Opt_congestion_kb:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (result.uint_32 < 1024) /* at least 1M */
goto out_of_range;
fsopt->congestion_kb = result.uint_32;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
break;
case Opt_dirstat:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (!result.negated)
fsopt->flags |= CEPH_MOUNT_OPT_DIRSTAT;
else
fsopt->flags &= ~CEPH_MOUNT_OPT_DIRSTAT;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
break;
case Opt_rbytes:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (!result.negated)
fsopt->flags |= CEPH_MOUNT_OPT_RBYTES;
else
fsopt->flags &= ~CEPH_MOUNT_OPT_RBYTES;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
break;
ceph: ensure Boolean options support both senses Many ceph-related Boolean options offer the ability to both enable and disable a feature. For all those that don't offer this, add a new option so that they do. Note that ceph_show_options()--which reports mount options currently in effect--only reports the option if it is different from the default value. Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-02-15 21:43:54 +08:00
case Opt_asyncreaddir:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (!result.negated)
fsopt->flags &= ~CEPH_MOUNT_OPT_NOASYNCREADDIR;
else
fsopt->flags |= CEPH_MOUNT_OPT_NOASYNCREADDIR;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
break;
ceph: enable/disable dentry complete flags via mount option Enable/disable use of the dentry dir 'complete' flag via a mount option. This lets the admin control whether ceph uses the dcache to satisfy negative lookups or readdir when it has the entire directory contents in its cache. This is purely a performance optimization; correctness is guaranteed whether it is enabled or not. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-11 01:12:55 +08:00
case Opt_dcache:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (!result.negated)
fsopt->flags |= CEPH_MOUNT_OPT_DCACHE;
else
fsopt->flags &= ~CEPH_MOUNT_OPT_DCACHE;
ceph: enable/disable dentry complete flags via mount option Enable/disable use of the dentry dir 'complete' flag via a mount option. This lets the admin control whether ceph uses the dcache to satisfy negative lookups or readdir when it has the entire directory contents in its cache. This is purely a performance optimization; correctness is guaranteed whether it is enabled or not. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-11 01:12:55 +08:00
break;
ceph: add ino32 mount option The ino32 mount option forces the ceph fs to report 32 bit ino values. This is useful for 64 bit kernels with 32 bit userspace. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-01-22 08:44:03 +08:00
case Opt_ino32:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (!result.negated)
fsopt->flags |= CEPH_MOUNT_OPT_INO32;
else
fsopt->flags &= ~CEPH_MOUNT_OPT_INO32;
ceph: ensure Boolean options support both senses Many ceph-related Boolean options offer the ability to both enable and disable a feature. For all those that don't offer this, add a new option so that they do. Note that ceph_show_options()--which reports mount options currently in effect--only reports the option if it is different from the default value. Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-02-15 21:43:54 +08:00
break;
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
case Opt_fscache:
ceph: return -EINVAL if given fsc mount option on kernel w/o support If someone requests fscache on the mount, and the kernel doesn't support it, it should fail the mount. [ Drop ceph prefix -- it's provided by pr_err. ] Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-07 22:39:32 +08:00
#ifdef CONFIG_CEPH_FSCACHE
ceph: keep consistent semantic in fscache related option combination When specifying multiple fscache related options, the result isn't always the same as option order, this fix will keep strict consistent meaning by order. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-07 10:27:06 +08:00
kfree(fsopt->fscache_uniq);
fsopt->fscache_uniq = NULL;
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (result.negated) {
fsopt->flags &= ~CEPH_MOUNT_OPT_FSCACHE;
} else {
fsopt->flags |= CEPH_MOUNT_OPT_FSCACHE;
fsopt->fscache_uniq = param->string;
param->string = NULL;
}
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
break;
ceph: return -EINVAL if given fsc mount option on kernel w/o support If someone requests fscache on the mount, and the kernel doesn't support it, it should fail the mount. [ Drop ceph prefix -- it's provided by pr_err. ] Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-07 22:39:32 +08:00
#else
ceph: use errorfc() and friends instead of spelling the prefix out Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-22 10:31:52 +08:00
return invalfc(fc, "fscache support is disabled");
ceph: return -EINVAL if given fsc mount option on kernel w/o support If someone requests fscache on the mount, and the kernel doesn't support it, it should fail the mount. [ Drop ceph prefix -- it's provided by pr_err. ] Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-07 22:39:32 +08:00
#endif
ceph: check OSD caps before read/write Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-27 15:33:28 +08:00
case Opt_poolperm:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (!result.negated)
fsopt->flags &= ~CEPH_MOUNT_OPT_NOPOOLPERM;
else
fsopt->flags |= CEPH_MOUNT_OPT_NOPOOLPERM;
ceph: check OSD caps before read/write Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-27 15:33:28 +08:00
break;
ceph: check availability of mds cluster on mount Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-10 16:02:06 +08:00
case Opt_require_active_mds:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (!result.negated)
fsopt->flags &= ~CEPH_MOUNT_OPT_MOUNTWAIT;
else
fsopt->flags |= CEPH_MOUNT_OPT_MOUNTWAIT;
ceph: check availability of mds cluster on mount Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-10 16:02:06 +08:00
break;
ceph: quota: report root dir quota usage in statfs This commit changes statfs default behaviour when reporting usage statistics. Instead of using the overall filesystem usage, statfs now reports the quota for the filesystem root, if ceph.quota.max_bytes has been set for this inode. If quota hasn't been set, it falls back to the old statfs behaviour. A new mount option is also added ('noquotadf') to disable this behaviour. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-01-31 18:53:13 +08:00
case Opt_quotadf:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (!result.negated)
fsopt->flags &= ~CEPH_MOUNT_OPT_NOQUOTADF;
else
fsopt->flags |= CEPH_MOUNT_OPT_NOQUOTADF;
ceph: quota: report root dir quota usage in statfs This commit changes statfs default behaviour when reporting usage statistics. Instead of using the overall filesystem usage, statfs now reports the quota for the filesystem root, if ceph.quota.max_bytes has been set for this inode. If quota hasn't been set, it falls back to the old statfs behaviour. A new mount option is also added ('noquotadf') to disable this behaviour. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-01-31 18:53:13 +08:00
break;
ceph: new mount option to disable usage of copy-from op Add a new mount option 'nocopyfrom' that will prevent the usage of the RADOS 'copy-from' operation in cephfs. This could be useful, for example, for an administrator to temporarily mitigate any possible bugs in the 'copy-from' implementation. Currently, only copy_file_range uses this RADOS operation. Setting this mount option will result in this syscall reverting to the default VFS implementation, i.e. to perform the copies locally instead of doing remote object copies. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-15 23:46:00 +08:00
case Opt_copyfrom:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (!result.negated)
fsopt->flags &= ~CEPH_MOUNT_OPT_NOCOPYFROM;
else
fsopt->flags |= CEPH_MOUNT_OPT_NOCOPYFROM;
ceph: new mount option to disable usage of copy-from op Add a new mount option 'nocopyfrom' that will prevent the usage of the RADOS 'copy-from' operation in cephfs. This could be useful, for example, for an administrator to temporarily mitigate any possible bugs in the 'copy-from' implementation. Currently, only copy_file_range uses this RADOS operation. Setting this mount option will result in this syscall reverting to the default VFS implementation, i.e. to perform the copies locally instead of doing remote object copies. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-15 23:46:00 +08:00
break;
ceph: add acl, noacl options for cephfs mount Make the 'acl' option dependent on having ACL support compiled in. Make the 'noacl' option work even without it so that one can always ask it to be off and not error out on mount when it is not supported. Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Signed-off-by: Sage Weil <sage@inktank.com>
2014-02-17 02:05:29 +08:00
case Opt_acl:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (!result.negated) {
#ifdef CONFIG_CEPH_FS_POSIX_ACL
fc->sb_flags |= SB_POSIXACL;
#else
ceph: use errorfc() and friends instead of spelling the prefix out Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-22 10:31:52 +08:00
return invalfc(fc, "POSIX ACL support is disabled");
ceph: add acl, noacl options for cephfs mount Make the 'acl' option dependent on having ACL support compiled in. Make the 'noacl' option work even without it so that one can always ask it to be off and not error out on mount when it is not supported. Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Signed-off-by: Sage Weil <sage@inktank.com>
2014-02-17 02:05:29 +08:00
#endif
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
} else {
fc->sb_flags &= ~SB_POSIXACL;
}
ceph: add acl, noacl options for cephfs mount Make the 'acl' option dependent on having ACL support compiled in. Make the 'noacl' option work even without it so that one can always ask it to be off and not error out on mount when it is not supported. Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Signed-off-by: Sage Weil <sage@inktank.com>
2014-02-17 02:05:29 +08:00
break;
ceph: perform asynchronous unlink if we have sufficient caps The MDS is getting a new lock-caching facility that will allow it to cache the necessary locks to allow asynchronous directory operations. Since the CEPH_CAP_FILE_* caps are currently unused on directories, we can repurpose those bits for this purpose. When performing an unlink, if we have Fx on the parent directory, and CEPH_CAP_DIR_UNLINK (aka Fr), and we know that the dentry being removed is the primary link, then then we can fire off an unlink request immediately and don't need to wait on reply before returning. In that situation, just fix up the dcache and link count and return immediately after issuing the call to the MDS. This does mean that we need to hold an extra reference to the inode being unlinked, and extra references to the caps to avoid races. Those references are put and error handling is done in the r_callback routine. If the operation ends up failing, then set a writeback error on the directory inode, and the inode itself that can be fetched later by an fsync on the dir. The behavior of dir caps is slightly different from caps on normal files. Because these are just considered an optimization, if the session is reconnected, we will not automatically reclaim them. They are instead considered lost until we do another synchronous op in the parent directory. Async dirops are enabled via the "nowsync" mount option, which is patterned after the xfs "wsync" mount option. For now, the default is "wsync", but eventually we may flip that. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-04-03 03:35:56 +08:00
case Opt_wsync:
if (!result.negated)
fsopt->flags &= ~CEPH_MOUNT_OPT_ASYNC_DIROPS;
else
fsopt->flags |= CEPH_MOUNT_OPT_ASYNC_DIROPS;
break;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
default:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
BUG();
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
}
return 0;
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
out_of_range:
ceph: use errorfc() and friends instead of spelling the prefix out Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-22 10:31:52 +08:00
return invalfc(fc, "%s out of range", param->key);
ceph: clean up fsid mount option Specify the fsid mount option in hex, not via the major/minor u64 hackery we had before. Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-01 12:34:01 +08:00
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
static void destroy_mount_options(struct ceph_mount_options *args)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
dout("destroy_mount_options %p\n", args);
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (!args)
return;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
kfree(args->snapdir_name);
ceph: mount non-default filesystem by name To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-08 11:25:38 +08:00
kfree(args->mds_namespace);
ceph: report mount root in session metadata Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-21 11:09:55 +08:00
kfree(args->server_path);
ceph: new mount option that specifies fscache uniquifier Current ceph uses FSID as primary index key of fscache data. This allows ceph to retain cached data across remount. But this causes problem (kernel opps, fscache does not support sharing data) when a filesystem get mounted several times (with fscache enabled, with different mount options). The fix is adding a new mount option, which specifies uniquifier for fscache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-27 11:57:56 +08:00
kfree(args->fscache_uniq);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
kfree(args);
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
static int strcmp_null(const char *s1, const char *s2)
{
if (!s1 && !s2)
return 0;
if (s1 && !s2)
return -1;
if (!s1 && s2)
return 1;
return strcmp(s1, s2);
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
static int compare_mount_options(struct ceph_mount_options *new_fsopt,
struct ceph_options *new_opt,
struct ceph_fs_client *fsc)
{
struct ceph_mount_options *fsopt1 = new_fsopt;
struct ceph_mount_options *fsopt2 = fsc->mount_options;
int ofs = offsetof(struct ceph_mount_options, snapdir_name);
int ret;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ret = memcmp(fsopt1, fsopt2, ofs);
if (ret)
return ret;
ret = strcmp_null(fsopt1->snapdir_name, fsopt2->snapdir_name);
ceph: mount non-default filesystem by name To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-08 11:25:38 +08:00
if (ret)
return ret;
ceph: canonicalize server path in place syzbot reported that 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") had caused a regression where an allocation could be done under a spinlock -- compare_mount_options() is called by sget_fc() with sb_lock held. We don't really need the supplied server path, so canonicalize it in place and compare it directly. To make this work, the leading slash is kept around and the logic in ceph_real_mount() to skip it is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e. canonicalized) path, with the leading slash of course. Fixes: 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-02-11 05:51:08 +08:00
ceph: mount non-default filesystem by name To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-08 11:25:38 +08:00
ret = strcmp_null(fsopt1->mds_namespace, fsopt2->mds_namespace);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (ret)
return ret;
ceph: remove the extra slashes in the server path It's possible to pass the mount helper a server path that has more than one contiguous slash character. For example: $ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/ In the MDS server side the extra slashes of the server path will be treated as snap dir, and then we can get the following debug logs: ceph: mount opening path // ceph: open_root_inode opening '//' ceph: fill_trace 0000000059b8a3bc is_dentry 0 is_target 1 ceph: alloc_inode 00000000dc4ca00b ceph: get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1 ceph: get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b And then when creating any new file or directory under the mount point, we can hit the following BUG_ON in ceph_fill_trace(): BUG_ON(ceph_snap(dir) != dvino.snap); Have the client ignore the extra slashes in the server path when mounting. This will also canonicalize the path, so that identical mounts can be consilidated. 1) "//mydir1///mydir//" 2) "/mydir1/mydir" 3) "/mydir1/mydir/" Regardless of the internal treatment of these paths, the kernel still stores the original string including the leading '/' for presentation to userland. URL: https://tracker.ceph.com/issues/42771 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-20 22:34:04 +08:00
ceph: canonicalize server path in place syzbot reported that 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") had caused a regression where an allocation could be done under a spinlock -- compare_mount_options() is called by sget_fc() with sb_lock held. We don't really need the supplied server path, so canonicalize it in place and compare it directly. To make this work, the leading slash is kept around and the logic in ceph_real_mount() to skip it is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e. canonicalized) path, with the leading slash of course. Fixes: 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-02-11 05:51:08 +08:00
ret = strcmp_null(fsopt1->server_path, fsopt2->server_path);
ceph: new mount option that specifies fscache uniquifier Current ceph uses FSID as primary index key of fscache data. This allows ceph to retain cached data across remount. But this causes problem (kernel opps, fscache does not support sharing data) when a filesystem get mounted several times (with fscache enabled, with different mount options). The fix is adding a new mount option, which specifies uniquifier for fscache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-27 11:57:56 +08:00
if (ret)
return ret;
ceph: remove the extra slashes in the server path It's possible to pass the mount helper a server path that has more than one contiguous slash character. For example: $ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/ In the MDS server side the extra slashes of the server path will be treated as snap dir, and then we can get the following debug logs: ceph: mount opening path // ceph: open_root_inode opening '//' ceph: fill_trace 0000000059b8a3bc is_dentry 0 is_target 1 ceph: alloc_inode 00000000dc4ca00b ceph: get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1 ceph: get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b And then when creating any new file or directory under the mount point, we can hit the following BUG_ON in ceph_fill_trace(): BUG_ON(ceph_snap(dir) != dvino.snap); Have the client ignore the extra slashes in the server path when mounting. This will also canonicalize the path, so that identical mounts can be consilidated. 1) "//mydir1///mydir//" 2) "/mydir1/mydir" 3) "/mydir1/mydir/" Regardless of the internal treatment of these paths, the kernel still stores the original string including the leading '/' for presentation to userland. URL: https://tracker.ceph.com/issues/42771 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-20 22:34:04 +08:00
ceph: new mount option that specifies fscache uniquifier Current ceph uses FSID as primary index key of fscache data. This allows ceph to retain cached data across remount. But this causes problem (kernel opps, fscache does not support sharing data) when a filesystem get mounted several times (with fscache enabled, with different mount options). The fix is adding a new mount option, which specifies uniquifier for fscache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-27 11:57:56 +08:00
ret = strcmp_null(fsopt1->fscache_uniq, fsopt2->fscache_uniq);
ceph: report mount root in session metadata Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-21 11:09:55 +08:00
if (ret)
return ret;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
return ceph_compare_options(new_opt, fsc->client);
}
/**
* ceph_show_options - Show mount options in /proc/mounts
* @m: seq_file to write to
vfs: switch ->show_options() to struct dentry * Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-09 10:32:45 +08:00
* @root: root of that (sub)tree
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
*/
vfs: switch ->show_options() to struct dentry * Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-09 10:32:45 +08:00
static int ceph_show_options(struct seq_file *m, struct dentry *root)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
{
vfs: switch ->show_options() to struct dentry * Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-09 10:32:45 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(root->d_sb);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_mount_options *fsopt = fsc->mount_options;
libceph, ceph: split ceph_show_options() Split ceph_show_options() into two pieces and move the piece responsible for printing client (libceph) options into net/ceph. This way people adding a libceph option wouldn't have to remember to update code in fs/ceph. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-03-26 02:02:16 +08:00
size_t pos;
int ret;
/* a comma between MNT/MS and client options */
seq_putc(m, ',');
pos = m->count;
libceph: allow setting abort_on_full for rbd Introduce a new option abort_on_full, default to false. Then we can get -ENOSPC when the pool is full, or reaches quota. [ Don't show abort_on_full in /proc/mounts. ] Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-12-18 17:31:48 +08:00
ret = ceph_print_client_options(m, fsc->client, false);
libceph, ceph: split ceph_show_options() Split ceph_show_options() into two pieces and move the piece responsible for printing client (libceph) options into net/ceph. This way people adding a libceph option wouldn't have to remember to update code in fs/ceph. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-03-26 02:02:16 +08:00
if (ret)
return ret;
/* retract our comma if no client options */
if (m->count == pos)
m->count--;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (fsopt->flags & CEPH_MOUNT_OPT_DIRSTAT)
seq_puts(m, ",dirstat");
ceph: don't enable rbytes mount option by default When rbytes mount option is enabled, directory size is recursive size. Recursive size is not updated instantly. This can cause directory size to change between successive stat(1) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-01-25 10:44:33 +08:00
if ((fsopt->flags & CEPH_MOUNT_OPT_RBYTES))
seq_puts(m, ",rbytes");
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (fsopt->flags & CEPH_MOUNT_OPT_NOASYNCREADDIR)
seq_puts(m, ",noasyncreaddir");
ceph: show non-default options only Don't pollute /proc/mounts with default options (presently these are dcache, nofsc and acl). Leave the acl/noacl however - it's a bit of a special case due to CONFIG_CEPH_FS_POSIX_ACL. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-03-26 02:10:09 +08:00
if ((fsopt->flags & CEPH_MOUNT_OPT_DCACHE) == 0)
ceph: enable/disable dentry complete flags via mount option Enable/disable use of the dentry dir 'complete' flag via a mount option. This lets the admin control whether ceph uses the dcache to satisfy negative lookups or readdir when it has the entire directory contents in its cache. This is purely a performance optimization; correctness is guaranteed whether it is enabled or not. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-11 01:12:55 +08:00
seq_puts(m, ",nodcache");
ceph: show ino32 if the value is different with default In current ceph_show_options(), there is no item for showing 'ino32', so add showing mount option 'ino32' if the value is different with default. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04 16:03:51 +08:00
if (fsopt->flags & CEPH_MOUNT_OPT_INO32)
seq_puts(m, ",ino32");
ceph: new mount option that specifies fscache uniquifier Current ceph uses FSID as primary index key of fscache data. This allows ceph to retain cached data across remount. But this causes problem (kernel opps, fscache does not support sharing data) when a filesystem get mounted several times (with fscache enabled, with different mount options). The fix is adding a new mount option, which specifies uniquifier for fscache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-27 11:57:56 +08:00
if (fsopt->flags & CEPH_MOUNT_OPT_FSCACHE) {
ceph: use seq_show_option for string type options Using seq_show_option to replace seq_printf for string type options. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-15 15:39:05 +08:00
seq_show_option(m, "fsc", fsopt->fscache_uniq);
ceph: new mount option that specifies fscache uniquifier Current ceph uses FSID as primary index key of fscache data. This allows ceph to retain cached data across remount. But this causes problem (kernel opps, fscache does not support sharing data) when a filesystem get mounted several times (with fscache enabled, with different mount options). The fix is adding a new mount option, which specifies uniquifier for fscache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-27 11:57:56 +08:00
}
ceph: check OSD caps before read/write Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-27 15:33:28 +08:00
if (fsopt->flags & CEPH_MOUNT_OPT_NOPOOLPERM)
seq_puts(m, ",nopoolperm");
ceph: quota: report root dir quota usage in statfs This commit changes statfs default behaviour when reporting usage statistics. Instead of using the overall filesystem usage, statfs now reports the quota for the filesystem root, if ceph.quota.max_bytes has been set for this inode. If quota hasn't been set, it falls back to the old statfs behaviour. A new mount option is also added ('noquotadf') to disable this behaviour. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-01-31 18:53:13 +08:00
if (fsopt->flags & CEPH_MOUNT_OPT_NOQUOTADF)
seq_puts(m, ",noquotadf");
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph: add acl, noacl options for cephfs mount Make the 'acl' option dependent on having ACL support compiled in. Make the 'noacl' option work even without it so that one can always ask it to be off and not error out on mount when it is not supported. Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Signed-off-by: Sage Weil <sage@inktank.com>
2014-02-17 02:05:29 +08:00
#ifdef CONFIG_CEPH_FS_POSIX_ACL
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (root->d_sb->s_flags & SB_POSIXACL)
ceph: add acl, noacl options for cephfs mount Make the 'acl' option dependent on having ACL support compiled in. Make the 'noacl' option work even without it so that one can always ask it to be off and not error out on mount when it is not supported. Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Signed-off-by: Sage Weil <sage@inktank.com>
2014-02-17 02:05:29 +08:00
seq_puts(m, ",acl");
else
seq_puts(m, ",noacl");
#endif
ceph: make 'nocopyfrom' a default mount option Since we found a problem with the 'copy-from' operation after objects have been truncated, offloading object copies to OSDs should be discouraged until the issue is fixed. Thus, this patch adds the 'nocopyfrom' mount option to the default mount options which effectily means that remote copies won't be done in copy_file_range unless they are explicitly enabled at mount time. [ Adjust ceph_show_options() accordingly. ] Link: https://tracker.ceph.com/issues/37378 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-12-10 18:23:12 +08:00
if ((fsopt->flags & CEPH_MOUNT_OPT_NOCOPYFROM) == 0)
seq_puts(m, ",copyfrom");
ceph: new mount option to disable usage of copy-from op Add a new mount option 'nocopyfrom' that will prevent the usage of the RADOS 'copy-from' operation in cephfs. This could be useful, for example, for an administrator to temporarily mitigate any possible bugs in the 'copy-from' implementation. Currently, only copy_file_range uses this RADOS operation. Setting this mount option will result in this syscall reverting to the default VFS implementation, i.e. to perform the copies locally instead of doing remote object copies. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-15 23:46:00 +08:00
ceph: mount non-default filesystem by name To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-08 11:25:38 +08:00
if (fsopt->mds_namespace)
ceph: use seq_show_option for string type options Using seq_show_option to replace seq_printf for string type options. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-15 15:39:05 +08:00
seq_show_option(m, "mds_namespace", fsopt->mds_namespace);
ceph: auto reconnect after blacklisted Make client use osd reply and session message to infer if itself is blacklisted. Client reconnect to cluster using new entity addr if it is blacklisted. Auto reconnect is limited to once every 30 minutes. Auto reconnect is disabled by default. It can be enabled/disabled by recover_session=<no|clean> mount option. In 'clean' mode, client drops any dirty data/metadata, invalidates page caches and invalidates all writable file handles. After reconnect, file locks become stale because MDS loses track of them. If an inode contains any stale file locks, read/write on the indoe are not allowed until applications release all stale file locks. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-25 20:16:47 +08:00
if (fsopt->flags & CEPH_MOUNT_OPT_CLEANRECOVER)
seq_show_option(m, "recover_session", "clean");
ceph: enable async dirops by default Async dirops have been supported in mainline kernels for quite some time now, and we've recently (as of June) started doing regular testing in teuthology with '-o nowsync'. There were a few issues, but we've sorted those out now. Enable async dirops by default, and change /proc/mounts to show "wsync" when they are disabled rather than "nowsync" when they are enabled. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-08-09 23:55:15 +08:00
if (!(fsopt->flags & CEPH_MOUNT_OPT_ASYNC_DIROPS))
seq_puts(m, ",wsync");
ceph: perform asynchronous unlink if we have sufficient caps The MDS is getting a new lock-caching facility that will allow it to cache the necessary locks to allow asynchronous directory operations. Since the CEPH_CAP_FILE_* caps are currently unused on directories, we can repurpose those bits for this purpose. When performing an unlink, if we have Fx on the parent directory, and CEPH_CAP_DIR_UNLINK (aka Fr), and we know that the dentry being removed is the primary link, then then we can fire off an unlink request immediately and don't need to wait on reply before returning. In that situation, just fix up the dcache and link count and return immediately after issuing the call to the MDS. This does mean that we need to hold an extra reference to the inode being unlinked, and extra references to the caps to avoid races. Those references are put and error handling is done in the r_callback routine. If the operation ends up failing, then set a writeback error on the directory inode, and the inode itself that can be fetched later by an fsync on the dir. The behavior of dir caps is slightly different from caps on normal files. Because these are just considered an optimization, if the session is reconnected, we will not automatically reclaim them. They are instead considered lost until we do another synchronous op in the parent directory. Async dirops are enabled via the "nowsync" mount option, which is patterned after the xfs "wsync" mount option. For now, the default is "wsync", but eventually we may flip that. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-04-03 03:35:56 +08:00
ceph: show wsize only if non-default This is how it was before commit 95cca2b44e54 ("ceph: limit osd write size") went in. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-05-03 22:26:55 +08:00
if (fsopt->wsize != CEPH_MAX_WRITE_SIZE)
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
seq_printf(m, ",wsize=%u", fsopt->wsize);
ceph: limit osd read size to CEPH_MSG_MAX_DATA_LEN libceph returns -EIO when read size > CEPH_MSG_MAX_DATA_LEN. Link: http://tracker.ceph.com/issues/20528 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-11 15:56:09 +08:00
if (fsopt->rsize != CEPH_MAX_READ_SIZE)
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
seq_printf(m, ",rsize=%u", fsopt->rsize);
ceph: rename rsize -> rasize It controls readahead. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-04 23:03:44 +08:00
if (fsopt->rasize != CEPH_RASIZE_DEFAULT)
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
seq_printf(m, ",rasize=%u", fsopt->rasize);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (fsopt->congestion_kb != default_congestion_kb())
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
seq_printf(m, ",write_congestion_kb=%u", fsopt->congestion_kb);
ceph: add mount option to limit caps count If number of caps exceed the limit, ceph_trim_dentires() also trim dentries with valid leases. Trimming dentry releases references to associated inode, which may evict inode and release caps. By default, there is no limit for caps count. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-02-01 14:57:15 +08:00
if (fsopt->caps_max)
seq_printf(m, ",caps_max=%d", fsopt->caps_max);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (fsopt->caps_wanted_delay_min != CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT)
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
seq_printf(m, ",caps_wanted_delay_min=%u",
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsopt->caps_wanted_delay_min);
if (fsopt->caps_wanted_delay_max != CEPH_CAPS_WANTED_DELAY_MAX_DEFAULT)
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
seq_printf(m, ",caps_wanted_delay_max=%u",
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsopt->caps_wanted_delay_max);
if (fsopt->max_readdir != CEPH_MAX_READDIR_DEFAULT)
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
seq_printf(m, ",readdir_max_entries=%u", fsopt->max_readdir);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (fsopt->max_readdir_bytes != CEPH_MAX_READDIR_BYTES_DEFAULT)
ceph: convert int fields in ceph_mount_options to unsigned int Most of these values should never be negative, so convert them to unsigned values. Add some sanity checking to the parsed values, and clean up some unneeded casts. Note that while caps_max should never be negative, this patch leaves it signed, since this value ends up later being compared to a signed counter. Just ensure that userland never passes in a negative value for caps_max. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-10 03:58:55 +08:00
seq_printf(m, ",readdir_max_bytes=%u", fsopt->max_readdir_bytes);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (strcmp(fsopt->snapdir_name, CEPH_SNAPDIRNAME_DEFAULT))
fs: create and use seq_show_option for escaping Many file systems that implement the show_options hook fail to correctly escape their output which could lead to unescaped characters (e.g. new lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This could lead to confusion, spoofed entries (resulting in things like systemd issuing false d-bus "mount" notifications), and who knows what else. This looks like it would only be the root user stepping on themselves, but it's possible weird things could happen in containers or in other situations with delegated mount privileges. Here's an example using overlay with setuid fusermount trusting the contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use of "sudo" is something more sneaky: $ BASE="ovl" $ MNT="$BASE/mnt" $ LOW="$BASE/lower" $ UP="$BASE/upper" $ WORK="$BASE/work/ 0 0 none /proc fuse.pwn user_id=1000" $ mkdir -p "$LOW" "$UP" "$WORK" $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt $ cat /proc/mounts none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0 none /proc fuse.pwn user_id=1000 0 0 $ fusermount -u /proc $ cat /proc/mounts cat: /proc/mounts: No such file or directory This fixes the problem by adding new seq_show_option and seq_show_option_n helpers, and updating the vulnerable show_option handlers to use them as needed. Some, like SELinux, need to be open coded due to unusual existing escape mechanisms. [akpm@linux-foundation.org: add lost chunk, per Kees] [keescook@chromium.org: seq_show_option should be using const parameters] Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Jan Kara <jack@suse.com> Acked-by: Paul Moore <paul@paul-moore.com> Cc: J. R. Okajima <hooanon05g@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 06:44:57 +08:00
seq_show_option(m, "snapdirname", fsopt->snapdir_name);
libceph, ceph: split ceph_show_options() Split ceph_show_options() into two pieces and move the piece responsible for printing client (libceph) options into net/ceph. This way people adding a libceph option wouldn't have to remember to update code in fs/ceph. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-03-26 02:02:16 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
return 0;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
}
/*
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
* handle any mon messages the standard library doesn't understand.
* return error if we don't either.
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
*/
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
static int extra_mon_dispatch(struct ceph_client *client, struct ceph_msg *msg)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = client->private;
int type = le16_to_cpu(msg->hdr.type);
switch (type) {
case CEPH_MSG_MDS_MAP:
ceph: mount non-default filesystem by name To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-08 11:25:38 +08:00
ceph_mdsc_handle_mdsmap(fsc->mdsc, msg);
return 0;
case CEPH_MSG_FS_MAP_USER:
ceph_mdsc_handle_fsmap(fsc->mdsc, msg);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
return 0;
default:
return -1;
}
}
/*
* create a new fs client
ceph: avoid a use-after-free in ceph_destroy_options() syzbot reported a use-after-free in ceph_destroy_options(), called from ceph_mount(). The problem was that create_fs_client() consumed the opt pointer on some errors, but not on all of them. Make sure it always consumes both libceph and ceph options. Reported-by: syzbot+8ab6f1042021b4eed062@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-08-24 21:32:43 +08:00
*
* Success or not, this function consumes @fsopt and @opt.
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
*/
ceph/super.c: quiet sparse noise Quiet the sparse noise: warning: symbol 'create_fs_client' was not declared. Should it be static? warning: symbol 'destroy_fs_client' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Sage Weil <sage@newdream.net> ceph-devel@vger.kernel.org Signed-off-by: Sage Weil <sage@newdream.net>
2011-09-24 02:53:30 +08:00
static struct ceph_fs_client *create_fs_client(struct ceph_mount_options *fsopt,
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_options *opt)
{
struct ceph_fs_client *fsc;
ceph: avoid a use-after-free in ceph_destroy_options() syzbot reported a use-after-free in ceph_destroy_options(), called from ceph_mount(). The problem was that create_fs_client() consumed the opt pointer on some errors, but not on all of them. Make sure it always consumes both libceph and ceph options. Reported-by: syzbot+8ab6f1042021b4eed062@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-08-24 21:32:43 +08:00
int err;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsc = kzalloc(sizeof(*fsc), GFP_KERNEL);
ceph: avoid a use-after-free in ceph_destroy_options() syzbot reported a use-after-free in ceph_destroy_options(), called from ceph_mount(). The problem was that create_fs_client() consumed the opt pointer on some errors, but not on all of them. Make sure it always consumes both libceph and ceph options. Reported-by: syzbot+8ab6f1042021b4eed062@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-08-24 21:32:43 +08:00
if (!fsc) {
err = -ENOMEM;
goto fail;
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
libceph, ceph: always advertise all supported features No reason to hide CephFS-specific features in the rbd case. Recent feature bits mix RADOS and CephFS-specific stuff together anyway. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-04 01:16:07 +08:00
fsc->client = ceph_create_client(opt, fsc);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (IS_ERR(fsc->client)) {
err = PTR_ERR(fsc->client);
goto fail;
}
ceph: avoid a use-after-free in ceph_destroy_options() syzbot reported a use-after-free in ceph_destroy_options(), called from ceph_mount(). The problem was that create_fs_client() consumed the opt pointer on some errors, but not on all of them. Make sure it always consumes both libceph and ceph options. Reported-by: syzbot+8ab6f1042021b4eed062@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-08-24 21:32:43 +08:00
opt = NULL; /* fsc->client now owns this */
libceph: make abort_on_full a per-osdc setting The intent behind making it a per-request setting was that it would be set for writes, but not for reads. As it is, the flag is set for all fs/ceph requests except for pool perm check stat request (technically a read). ceph_osdc_abort_on_full() skips reads since the previous commit and I don't see a use case for marking individual requests. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-05-30 22:29:14 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsc->client->extra_mon_dispatch = extra_mon_dispatch;
libceph: allow setting abort_on_full for rbd Introduce a new option abort_on_full, default to false. Then we can get -ENOSPC when the pool is full, or reaches quota. [ Don't show abort_on_full in /proc/mounts. ] Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-12-18 17:31:48 +08:00
ceph_set_opt(fsc->client, ABORT_ON_FULL);
ceph: mount non-default filesystem by name To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-08 11:25:38 +08:00
ceph: adjust 36 checks for NULL pointers The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written ... Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-08-21 02:22:02 +08:00
if (!fsopt->mds_namespace) {
ceph: mount non-default filesystem by name To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-08 11:25:38 +08:00
ceph_monc_want_map(&fsc->client->monc, CEPH_SUB_MDSMAP,
0, true);
} else {
ceph_monc_want_map(&fsc->client->monc, CEPH_SUB_FSMAP,
0, false);
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsc->mount_options = fsopt;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsc->sb = NULL;
fsc->mount_state = CEPH_MOUNT_MOUNTING;
ceph: invalidate all write mode filp after reconnect Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-25 20:16:46 +08:00
fsc->filp_gen = 1;
ceph: use copy-from2 op in copy_file_range Instead of using the copy-from operation, switch copy_file_range to the new copy-from2 operation, which allows to send the truncate_seq and truncate_size parameters. If an OSD does not support the copy-from2 operation it will return -EOPNOTSUPP. In that case, the kernel client will stop trying to do remote object copies for this fs client and will always use the generic VFS copy_file_range. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-08 18:03:53 +08:00
fsc->have_copy_from2 = true;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
atomic_long_set(&fsc->writeback_count, 0);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
err = -ENOMEM;
ceph: fsc->*_wq's aren't used in memory reclaim path fsc->*_wq's aren't depended upon during memory reclaim. Convert to alloc_workqueue() w/o WQ_MEM_RECLAIM. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Sage Weil <sage@newdream.net> Cc: ceph-devel@vger.kernel.org Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-03 21:49:45 +08:00
/*
* The number of concurrent works can be high but they don't need
* to be processed in parallel, limit concurrency.
*/
ceph: single workqueue for inode related works We have three workqueue for inode works. Later patch will introduce one more work for inode. It's not good to introcuce more workqueue and add more 'struct work_struct' to 'struct ceph_inode_info'. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-18 11:18:44 +08:00
fsc->inode_wq = alloc_workqueue("ceph-inode", WQ_UNBOUND, 0);
if (!fsc->inode_wq)
ceph: Convert to separately allocated bdi Allocate struct backing_dev_info separately instead of embedding it inside client structure. This unifies handling of bdi among users. CC: Ilya Dryomov <idryomov@gmail.com> CC: "Yan, Zheng" <zyan@redhat.com> CC: Sage Weil <sage@redhat.com> CC: ceph-devel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-12 18:24:33 +08:00
goto fail_client;
ceph: send cap releases more aggressively When pending cap releases fill up one message, start a work to send cap release message. (old way is sending cap releases every 5 seconds) Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-01-14 17:21:19 +08:00
fsc->cap_wq = alloc_workqueue("ceph-cap", 0, 1);
if (!fsc->cap_wq)
ceph: single workqueue for inode related works We have three workqueue for inode works. Later patch will introduce one more work for inode. It's not good to introcuce more workqueue and add more 'struct work_struct' to 'struct ceph_inode_info'. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-18 11:18:44 +08:00
goto fail_inode_wq;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: periodically send perf metrics to MDSes This will send the caps/read/write/metadata metrics to any available MDS once per second, which will be the same as the userland client. It will skip the MDS sessions which don't support the metric collection, as the MDSs will close socket connections when they get an unknown type message. We can disable the metric sending via the disable_send_metrics module parameter. [ jlayton: fix up endianness bug in ceph_mdsc_send_metrics() ] URL: https://tracker.ceph.com/issues/43215 Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-07-16 22:05:57 +08:00
spin_lock(&ceph_fsc_lock);
list_add_tail(&fsc->metric_wakeup, &ceph_fsc_list);
spin_unlock(&ceph_fsc_lock);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
return fsc;
ceph: move mempool creation to ceph_create_client Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 07:08:44 +08:00
ceph: single workqueue for inode related works We have three workqueue for inode works. Later patch will introduce one more work for inode. It's not good to introcuce more workqueue and add more 'struct work_struct' to 'struct ceph_inode_info'. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-18 11:18:44 +08:00
fail_inode_wq:
destroy_workqueue(fsc->inode_wq);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fail_client:
ceph_destroy_client(fsc->client);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
fail:
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
kfree(fsc);
ceph: avoid a use-after-free in ceph_destroy_options() syzbot reported a use-after-free in ceph_destroy_options(), called from ceph_mount(). The problem was that create_fs_client() consumed the opt pointer on some errors, but not on all of them. Make sure it always consumes both libceph and ceph options. Reported-by: syzbot+8ab6f1042021b4eed062@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-08-24 21:32:43 +08:00
if (opt)
ceph_destroy_options(opt);
destroy_mount_options(fsopt);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
return ERR_PTR(err);
}
ceph: flush pending works before shutdown super Pending works hold inode references, which cause "Busy inodes after unmount" warning. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-05-18 16:05:51 +08:00
static void flush_fs_workqueues(struct ceph_fs_client *fsc)
{
ceph: single workqueue for inode related works We have three workqueue for inode works. Later patch will introduce one more work for inode. It's not good to introcuce more workqueue and add more 'struct work_struct' to 'struct ceph_inode_info'. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-18 11:18:44 +08:00
flush_workqueue(fsc->inode_wq);
ceph: send cap releases more aggressively When pending cap releases fill up one message, start a work to send cap release message. (old way is sending cap releases every 5 seconds) Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-01-14 17:21:19 +08:00
flush_workqueue(fsc->cap_wq);
ceph: flush pending works before shutdown super Pending works hold inode references, which cause "Busy inodes after unmount" warning. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-05-18 16:05:51 +08:00
}
ceph/super.c: quiet sparse noise Quiet the sparse noise: warning: symbol 'create_fs_client' was not declared. Should it be static? warning: symbol 'destroy_fs_client' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Sage Weil <sage@newdream.net> ceph-devel@vger.kernel.org Signed-off-by: Sage Weil <sage@newdream.net>
2011-09-24 02:53:30 +08:00
static void destroy_fs_client(struct ceph_fs_client *fsc)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
dout("destroy_fs_client %p\n", fsc);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: periodically send perf metrics to MDSes This will send the caps/read/write/metadata metrics to any available MDS once per second, which will be the same as the userland client. It will skip the MDS sessions which don't support the metric collection, as the MDSs will close socket connections when they get an unknown type message. We can disable the metric sending via the disable_send_metrics module parameter. [ jlayton: fix up endianness bug in ceph_mdsc_send_metrics() ] URL: https://tracker.ceph.com/issues/43215 Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-07-16 22:05:57 +08:00
spin_lock(&ceph_fsc_lock);
list_del(&fsc->metric_wakeup);
spin_unlock(&ceph_fsc_lock);
ceph: call ceph_mdsc_destroy from destroy_fs_client They're always called in succession. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-12 20:07:56 +08:00
ceph_mdsc_destroy(fsc);
ceph: single workqueue for inode related works We have three workqueue for inode works. Later patch will introduce one more work for inode. It's not good to introcuce more workqueue and add more 'struct work_struct' to 'struct ceph_inode_info'. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-18 11:18:44 +08:00
destroy_workqueue(fsc->inode_wq);
ceph: send cap releases more aggressively When pending cap releases fill up one message, start a work to send cap release message. (old way is sending cap releases every 5 seconds) Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-01-14 17:21:19 +08:00
destroy_workqueue(fsc->cap_wq);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
destroy_mount_options(fsc->mount_options);
ceph: unregister bdi before kill_anon_super releases device name Unregister and destroy the bdi in put_super, after mount is r/o, but before put_anon_super releases the device name. For symmetry, bdi_destroy in destroy_client (we bdi_init in create_client). Only set s_bdi if bdi_register succeeds, since we use it to decide whether to bdi_unregister. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-05 07:14:46 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph_destroy_client(fsc->client);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
kfree(fsc);
dout("destroy_fs_client %p done\n", fsc);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
}
ceph: fix debugfs entry, simplify fsid checks We may first learn our fsid from any of the mon, osd, or mds maps (whichever the monitor sends first). Consolidate checks in a single helper. Initialize the client debugfs entry then, since we need the fsid (and global_id) for the directory name. Also remove dead mount code. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:50:41 +08:00
/*
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
* caches
ceph: fix debugfs entry, simplify fsid checks We may first learn our fsid from any of the mon, osd, or mds maps (whichever the monitor sends first). Consolidate checks in a single helper. Initialize the client debugfs entry then, since we need the fsid (and global_id) for the directory name. Also remove dead mount code. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:50:41 +08:00
*/
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct kmem_cache *ceph_inode_cachep;
struct kmem_cache *ceph_cap_cachep;
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
struct kmem_cache *ceph_cap_flush_cachep;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct kmem_cache *ceph_dentry_cachep;
struct kmem_cache *ceph_file_cachep;
ceph: optimize memory usage In current code, regular file and directory use same struct ceph_file_info to store fs specific data so the struct has to include some fields which are only used for directory (e.g., readdir related info), when having plenty of regular files, it will lead to memory waste. This patch introduces dedicated ceph_dir_file_info cache for readdir related thins. So that regular file does not include those unused fields anymore. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-03-13 10:42:44 +08:00
struct kmem_cache *ceph_dir_file_cachep;
ceph: move to a dedicated slabcache for mds requests On my machine (x86_64) this struct is 952 bytes, which gets rounded up to 1024 by kmalloc. Move this to a dedicated slabcache, so we can allocate them without the extra 72 bytes of overhead per. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-02-18 07:38:37 +08:00
struct kmem_cache *ceph_mds_request_cachep;
ceph: move sb->wb_pagevec_pool to be a global mempool When doing some testing recently, I hit some page allocation failures on mount, when creating the wb_pagevec_pool for the mount. That requires 128k (32 contiguous pages), and after thrashing the memory during an xfstests run, sometimes that would fail. 128k for each mount seems like a lot to hold in reserve for a rainy day, so let's change this to a global mempool that gets allocated when the module is plugged in. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-07-30 23:03:55 +08:00
mempool_t *ceph_wb_pagevec_pool;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
static void ceph_inode_init_once(void *foo)
ceph: fix debugfs entry, simplify fsid checks We may first learn our fsid from any of the mon, osd, or mds maps (whichever the monitor sends first). Consolidate checks in a single helper. Initialize the client debugfs entry then, since we need the fsid (and global_id) for the directory name. Also remove dead mount code. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:50:41 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_inode_info *ci = foo;
inode_init_once(&ci->vfs_inode);
}
static int __init init_caches(void)
{
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
int error = -ENOMEM;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph_inode_cachep = kmem_cache_create("ceph_inode_info",
sizeof(struct ceph_inode_info),
__alignof__(struct ceph_inode_info),
kmemcg: account certain kmem allocations to memcg Mark those kmem allocations that are known to be easily triggered from userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to memcg. For the list, see below: - threadinfo - task_struct - task_delay_info - pid - cred - mm_struct - vm_area_struct and vm_region (nommu) - anon_vma and anon_vma_chain - signal_struct - sighand_struct - fs_struct - files_struct - fdtable and fdtable->full_fds_bits - dentry and external_name - inode for all filesystems. This is the most tedious part, because most filesystems overwrite the alloc_inode method. The list is far from complete, so feel free to add more objects. Nevertheless, it should be close to "account everything" approach and keep most workloads within bounds. Malevolent users will be able to breach the limit, but this was possible even with the former "account everything" approach (simply because it did not account everything in fact). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 07:18:21 +08:00
SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD|
SLAB_ACCOUNT, ceph_inode_init_once);
ceph: adjust 36 checks for NULL pointers The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written ... Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-08-21 02:22:02 +08:00
if (!ceph_inode_cachep)
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
return -ENOMEM;
ceph: mark the cap cache as unreclaimable Releasing cap is affected by many factors (e.g., avail_count/reserve_count/min_count) and min_count could be specified high volume in client mount option. Hence it's better to mark cap cache as unreclaimable in case of non-trivial discrepancies between memory shown as reclaimable and what is actually reclaimed. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-27 13:49:44 +08:00
ceph_cap_cachep = KMEM_CACHE(ceph_cap, SLAB_MEM_SPREAD);
ceph: adjust 36 checks for NULL pointers The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written ... Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-08-21 02:22:02 +08:00
if (!ceph_cap_cachep)
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
goto bad_cap;
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
ceph_cap_flush_cachep = KMEM_CACHE(ceph_cap_flush,
SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD);
ceph: adjust 36 checks for NULL pointers The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written ... Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-08-21 02:22:02 +08:00
if (!ceph_cap_flush_cachep)
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
goto bad_cap_flush;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph_dentry_cachep = KMEM_CACHE(ceph_dentry_info,
SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD);
ceph: adjust 36 checks for NULL pointers The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written ... Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-08-21 02:22:02 +08:00
if (!ceph_dentry_cachep)
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
goto bad_dentry;
ceph: Mark the file cache as unreclaimable Ceph creates multiple caches with the SLAB_RECLAIMABLE flag set, so that it can satisfy its internal needs. Inspecting the code shows that most of the caches are indeed reclaimable since they are directly related to the generic inode/dentry shrinkers. However, one of the cache used to satisfy struct file is not reclaimable since its entries are freed only when the last reference to the file is dropped. If a heavily loaded node opens a lot of files it can introduce non-trivial discrepancies between memory shown as reclaimable and what is actually reclaimed when drop_caches is used. Fix this by removing the reclaimable flag for the file's cache. Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-26 01:12:13 +08:00
ceph_file_cachep = KMEM_CACHE(ceph_file_info, SLAB_MEM_SPREAD);
ceph: adjust 36 checks for NULL pointers The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written ... Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-08-21 02:22:02 +08:00
if (!ceph_file_cachep)
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
goto bad_file;
ceph: optimize memory usage In current code, regular file and directory use same struct ceph_file_info to store fs specific data so the struct has to include some fields which are only used for directory (e.g., readdir related info), when having plenty of regular files, it will lead to memory waste. This patch introduces dedicated ceph_dir_file_info cache for readdir related thins. So that regular file does not include those unused fields anymore. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-03-13 10:42:44 +08:00
ceph_dir_file_cachep = KMEM_CACHE(ceph_dir_file_info, SLAB_MEM_SPREAD);
if (!ceph_dir_file_cachep)
goto bad_dir_file;
ceph: move to a dedicated slabcache for mds requests On my machine (x86_64) this struct is 952 bytes, which gets rounded up to 1024 by kmalloc. Move this to a dedicated slabcache, so we can allocate them without the extra 72 bytes of overhead per. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-02-18 07:38:37 +08:00
ceph_mds_request_cachep = KMEM_CACHE(ceph_mds_request, SLAB_MEM_SPREAD);
if (!ceph_mds_request_cachep)
goto bad_mds_req;
ceph: move sb->wb_pagevec_pool to be a global mempool When doing some testing recently, I hit some page allocation failures on mount, when creating the wb_pagevec_pool for the mount. That requires 128k (32 contiguous pages), and after thrashing the memory during an xfstests run, sometimes that would fail. 128k for each mount seems like a lot to hold in reserve for a rainy day, so let's change this to a global mempool that gets allocated when the module is plugged in. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-07-30 23:03:55 +08:00
ceph_wb_pagevec_pool = mempool_create_kmalloc_pool(10, CEPH_MAX_WRITE_SIZE >> PAGE_SHIFT);
if (!ceph_wb_pagevec_pool)
goto bad_pagevec_pool;
ceph: fix potential memory leak in init_caches() There is lack of cache destroy operation for ceph_file_cachep when failing from fscache register. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-03-01 14:24:51 +08:00
error = ceph_fscache_register();
if (error)
goto bad_fscache;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
return 0;
ceph: fix potential memory leak in init_caches() There is lack of cache destroy operation for ceph_file_cachep when failing from fscache register. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-03-01 14:24:51 +08:00
bad_fscache:
ceph: move to a dedicated slabcache for mds requests On my machine (x86_64) this struct is 952 bytes, which gets rounded up to 1024 by kmalloc. Move this to a dedicated slabcache, so we can allocate them without the extra 72 bytes of overhead per. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-02-18 07:38:37 +08:00
kmem_cache_destroy(ceph_mds_request_cachep);
ceph: move sb->wb_pagevec_pool to be a global mempool When doing some testing recently, I hit some page allocation failures on mount, when creating the wb_pagevec_pool for the mount. That requires 128k (32 contiguous pages), and after thrashing the memory during an xfstests run, sometimes that would fail. 128k for each mount seems like a lot to hold in reserve for a rainy day, so let's change this to a global mempool that gets allocated when the module is plugged in. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-07-30 23:03:55 +08:00
bad_pagevec_pool:
mempool_destroy(ceph_wb_pagevec_pool);
ceph: move to a dedicated slabcache for mds requests On my machine (x86_64) this struct is 952 bytes, which gets rounded up to 1024 by kmalloc. Move this to a dedicated slabcache, so we can allocate them without the extra 72 bytes of overhead per. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-02-18 07:38:37 +08:00
bad_mds_req:
ceph: optimize memory usage In current code, regular file and directory use same struct ceph_file_info to store fs specific data so the struct has to include some fields which are only used for directory (e.g., readdir related info), when having plenty of regular files, it will lead to memory waste. This patch introduces dedicated ceph_dir_file_info cache for readdir related thins. So that regular file does not include those unused fields anymore. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-03-13 10:42:44 +08:00
kmem_cache_destroy(ceph_dir_file_cachep);
bad_dir_file:
ceph: fix potential memory leak in init_caches() There is lack of cache destroy operation for ceph_file_cachep when failing from fscache register. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-03-01 14:24:51 +08:00
kmem_cache_destroy(ceph_file_cachep);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
bad_file:
kmem_cache_destroy(ceph_dentry_cachep);
bad_dentry:
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
kmem_cache_destroy(ceph_cap_flush_cachep);
bad_cap_flush:
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
kmem_cache_destroy(ceph_cap_cachep);
bad_cap:
kmem_cache_destroy(ceph_inode_cachep);
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
return error;
ceph: fix debugfs entry, simplify fsid checks We may first learn our fsid from any of the mon, osd, or mds maps (whichever the monitor sends first). Consolidate checks in a single helper. Initialize the client debugfs entry then, since we need the fsid (and global_id) for the directory name. Also remove dead mount code. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:50:41 +08:00
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
static void destroy_caches(void)
{
fs: push rcu_barrier() from deactivate_locked_super() to filesystems There's no reason to call rcu_barrier() on every deactivate_locked_super(). We only need to make sure that all delayed rcu free inodes are flushed before we destroy related cache. Removing rcu_barrier() from deactivate_locked_super() affects some fast paths. E.g. on my machine exit_group() of a last process in IPC namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26 09:33:07 +08:00
/*
* Make sure all delayed rcu free inodes are flushed before we
* destroy cache.
*/
rcu_barrier();
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
kmem_cache_destroy(ceph_inode_cachep);
kmem_cache_destroy(ceph_cap_cachep);
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
kmem_cache_destroy(ceph_cap_flush_cachep);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
kmem_cache_destroy(ceph_dentry_cachep);
kmem_cache_destroy(ceph_file_cachep);
ceph: optimize memory usage In current code, regular file and directory use same struct ceph_file_info to store fs specific data so the struct has to include some fields which are only used for directory (e.g., readdir related info), when having plenty of regular files, it will lead to memory waste. This patch introduces dedicated ceph_dir_file_info cache for readdir related thins. So that regular file does not include those unused fields anymore. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-03-13 10:42:44 +08:00
kmem_cache_destroy(ceph_dir_file_cachep);
ceph: move to a dedicated slabcache for mds requests On my machine (x86_64) this struct is 952 bytes, which gets rounded up to 1024 by kmalloc. Move this to a dedicated slabcache, so we can allocate them without the extra 72 bytes of overhead per. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-02-18 07:38:37 +08:00
kmem_cache_destroy(ceph_mds_request_cachep);
ceph: move sb->wb_pagevec_pool to be a global mempool When doing some testing recently, I hit some page allocation failures on mount, when creating the wb_pagevec_pool for the mount. That requires 128k (32 contiguous pages), and after thrashing the memory during an xfstests run, sometimes that would fail. 128k for each mount seems like a lot to hold in reserve for a rainy day, so let's change this to a global mempool that gets allocated when the module is plugged in. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-07-30 23:03:55 +08:00
mempool_destroy(ceph_wb_pagevec_pool);
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
ceph_fscache_unregister();
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
}
ceph: add new RECOVER mount_state when recovering session When recovering a session (a'la recover_session=clean), we want to do all of the operations that we do on a forced umount, but changing the mount state to SHUTDOWN is can cause queued MDS requests to fail when the session comes back. Most of those can idle until the session is recovered in this situation. Reserve SHUTDOWN state for forced umount, and make a new RECOVER state for the forced reconnect situation. Change several tests for equality with SHUTDOWN to test for that or RECOVER. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-09-25 19:55:39 +08:00
static void __ceph_umount_begin(struct ceph_fs_client *fsc)
{
ceph_osdc_abort_requests(&fsc->client->osdc, -EIO);
ceph_mdsc_force_umount(fsc->mdsc);
fsc->filp_gen++; // invalidate open files
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
/*
ceph: delete repeated words in fs/ceph/ Drop duplicated words "down" and "the" in fs/ceph/. [ idryomov: merge into a single patch ] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-07-18 07:36:04 +08:00
* ceph_umount_begin - initiate forced umount. Tear down the
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
* mount, skipping steps that may hang while waiting for server(s).
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
*/
ceph: shut down mount on bad mdsmap or fsmap decode As Greg pointed out, if we get a mangled mdsmap or fsmap, then something has gone very wrong, and we should avoid doing any activity on the filesystem. When this occurs, shut down the mount the same way we would with a forced umount by calling ceph_umount_begin when decoding fails on either map. This causes most operations done against the filesystem to return an error. Any dirty data or caps in the cache will be dropped as well. The effect is not reversible, so the only remedy is to umount. [ idryomov: print fsmap decoding error ] URL: https://tracker.ceph.com/issues/52303 Signed-off-by: Jeff Layton <jlayton@kernel.org> Acked-by: Greg Farnum <gfarnum@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-10-14 23:10:47 +08:00
void ceph_umount_begin(struct super_block *sb)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
dout("ceph_umount_begin - starting forced umount\n");
if (!fsc)
return;
fsc->mount_state = CEPH_MOUNT_SHUTDOWN;
ceph: add new RECOVER mount_state when recovering session When recovering a session (a'la recover_session=clean), we want to do all of the operations that we do on a forced umount, but changing the mount state to SHUTDOWN is can cause queued MDS requests to fail when the session comes back. Most of those can idle until the session is recovered in this situation. Reserve SHUTDOWN state for forced umount, and make a new RECOVER state for the forced reconnect situation. Change several tests for equality with SHUTDOWN to test for that or RECOVER. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-09-25 19:55:39 +08:00
__ceph_umount_begin(fsc);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
static const struct super_operations ceph_super_ops = {
.alloc_inode = ceph_alloc_inode,
ceph: use ->free_inode() a lot of non-delayed work in this case; all of that is left in ->destroy_inode() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-11 03:18:50 +08:00
.free_inode = ceph_free_inode,
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
.write_inode = ceph_write_inode,
ceph: use generic_delete_inode() for ->drop_inode ceph_drop_inode() implementation is not any different from the generic function, thus there's no point in keeping it around. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-06 00:14:56 +08:00
.drop_inode = generic_delete_inode,
ceph: use ceph_evict_inode to cleanup inode's resource remove_session_caps() relies on __wait_on_freeing_inode(), to wait for freeing inode to remove its caps. But VFS wakes freeing inode waiters before calling destroy_inode(). Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/40102 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-06-02 09:45:38 +08:00
.evict_inode = ceph_evict_inode,
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
.sync_fs = ceph_sync_fs,
.put_super = ceph_put_super,
.show_options = ceph_show_options,
.statfs = ceph_statfs,
.umount_begin = ceph_umount_begin,
};
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
/*
* Bootstrap mount by opening the root directory. Note the mount
* @started time from caller, and time out if this takes too long.
*/
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
static struct dentry *open_root_dentry(struct ceph_fs_client *fsc,
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
const char *path,
unsigned long started)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
struct ceph_mds_request *req = NULL;
int err;
struct dentry *root;
/* open dir */
dout("open_root_inode opening '%s'\n", path);
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_GETATTR, USE_ANY_MDS);
if (IS_ERR(req))
fs/ceph: Use ERR_CAST Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. In the case of fs/ceph/inode.c, ERR_CAST is not needed, because the type of the returned value is the same as the type of the enclosing function. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-22 18:01:14 +08:00
return ERR_CAST(req);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
req->r_path1 = kstrdup(path, GFP_NOFS);
ceph: kstrdup() memory handling Currently, there is no check for the kstrdup() for r_path2, r_path1 and snapdir_name as various locations as there is a possibility of failure during memory pressure. Therefore, returning ENOMEM where the checks have been missed. Signed-off-by: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-03-22 00:54:58 +08:00
if (!req->r_path1) {
root = ERR_PTR(-ENOMEM);
goto out;
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
req->r_ino1.ino = CEPH_INO_ROOT;
req->r_ino1.snap = CEPH_NOSNAP;
req->r_started = started;
libceph: store timeouts in jiffies, verify user input There are currently three libceph-level timeouts that the user can specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive. All of these are in seconds and no checking is done on user input: negative values are accepted, we multiply them all by HZ which may or may not overflow, arbitrarily large jiffies then get added together, etc. There is also a bug in the way mount_timeout=0 is handled. It's supposed to mean "infinite timeout", but that's not how wait.h APIs treat it and so __ceph_open_session() for example will busy loop without much chance of being interrupted if none of ceph-mons are there. Fix all this by verifying user input, storing timeouts capped by msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies() helper for all user-specified waits to handle infinite timeouts correctly. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-05-15 17:02:17 +08:00
req->r_timeout = fsc->client->options->mount_timeout;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
req->r_args.getattr.mask = cpu_to_le32(CEPH_STAT_CAP_INODE);
req->r_num_caps = 2;
err = ceph_mdsc_do_request(mdsc, NULL, req);
if (err == 0) {
ceph: d_alloc_root() may fail ... and ceph_init_dentry(NULL) will oops Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-10 05:34:32 +08:00
struct inode *inode = req->r_target_inode;
req->r_target_inode = NULL;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
dout("open_root_inode success\n");
ceph: avoid accessing / when mounting a subpath Accessing / causes failuire if the client has caps that restrict path Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 14:53:05 +08:00
root = d_make_root(inode);
if (!root) {
root = ERR_PTR(-ENOMEM);
goto out;
ceph: initialize root dentry Set up d_fsdata on the root dentry. This fixes a NULL pointer dereference in ceph_d_prune on umount. It also means we can eventually strip out all of the conditional checks on d_fsdata because it is now set unconditionally (prior to setting up the d_ops). Fix the ceph_d_prune debug print while we're here. Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-12 01:48:08 +08:00
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
dout("open_root_inode success, root dentry is %p\n", root);
} else {
root = ERR_PTR(err);
}
ceph: d_alloc_root() may fail ... and ceph_init_dentry(NULL) will oops Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-10 05:34:32 +08:00
out:
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph_mdsc_put_request(req);
return root;
}
/*
* mount: join the ceph cluster, and open root directory.
*/
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
static struct dentry *ceph_real_mount(struct ceph_fs_client *fsc,
struct fs_context *fc)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
{
int err;
unsigned long started = jiffies; /* note the start time */
struct dentry *root;
ceph: fix mounting same fs multiple times Now __ceph_open_session() only accepts closed client. An opened client will tigger BUG_ON(). Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-12 13:20:48 +08:00
dout("mount start %p\n", fsc);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
mutex_lock(&fsc->client->mount_mutex);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: fix mounting same fs multiple times Now __ceph_open_session() only accepts closed client. An opened client will tigger BUG_ON(). Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-12 13:20:48 +08:00
if (!fsc->sb->s_root) {
ceph: canonicalize server path in place syzbot reported that 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") had caused a regression where an allocation could be done under a spinlock -- compare_mount_options() is called by sget_fc() with sb_lock held. We don't really need the supplied server path, so canonicalize it in place and compare it directly. To make this work, the leading slash is kept around and the logic in ceph_real_mount() to skip it is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e. canonicalized) path, with the leading slash of course. Fixes: 4fbc0c711b24 ("ceph: remove the extra slashes in the server path") Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-02-11 05:51:08 +08:00
const char *path = fsc->mount_options->server_path ?
fsc->mount_options->server_path + 1 : "";
ceph: fix mounting same fs multiple times Now __ceph_open_session() only accepts closed client. An opened client will tigger BUG_ON(). Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-12 13:20:48 +08:00
err = __ceph_open_session(fsc->client, started);
if (err < 0)
goto out;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: new mount option that specifies fscache uniquifier Current ceph uses FSID as primary index key of fscache data. This allows ceph to retain cached data across remount. But this causes problem (kernel opps, fscache does not support sharing data) when a filesystem get mounted several times (with fscache enabled, with different mount options). The fix is adding a new mount option, which specifies uniquifier for fscache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-27 11:57:56 +08:00
/* setup fscache */
if (fsc->mount_options->flags & CEPH_MOUNT_OPT_FSCACHE) {
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
err = ceph_fscache_register_fs(fsc, fc);
ceph: new mount option that specifies fscache uniquifier Current ceph uses FSID as primary index key of fscache data. This allows ceph to retain cached data across remount. But this causes problem (kernel opps, fscache does not support sharing data) when a filesystem get mounted several times (with fscache enabled, with different mount options). The fix is adding a new mount option, which specifies uniquifier for fscache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-27 11:57:56 +08:00
if (err < 0)
goto out;
}
ceph: remove the extra slashes in the server path It's possible to pass the mount helper a server path that has more than one contiguous slash character. For example: $ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/ In the MDS server side the extra slashes of the server path will be treated as snap dir, and then we can get the following debug logs: ceph: mount opening path // ceph: open_root_inode opening '//' ceph: fill_trace 0000000059b8a3bc is_dentry 0 is_target 1 ceph: alloc_inode 00000000dc4ca00b ceph: get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1 ceph: get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b And then when creating any new file or directory under the mount point, we can hit the following BUG_ON in ceph_fill_trace(): BUG_ON(ceph_snap(dir) != dvino.snap); Have the client ignore the extra slashes in the server path when mounting. This will also canonicalize the path, so that identical mounts can be consilidated. 1) "//mydir1///mydir//" 2) "/mydir1/mydir" 3) "/mydir1/mydir/" Regardless of the internal treatment of these paths, the kernel still stores the original string including the leading '/' for presentation to userland. URL: https://tracker.ceph.com/issues/42771 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-20 22:34:04 +08:00
dout("mount opening path '%s'\n", path);
ceph: fix dentry leak when failing to init debugfs When failing from ceph_fs_debugfs_init() in ceph_real_mount(), there is lack of dput of root_dentry and it causes slab errors, so change the calling order of ceph_fs_debugfs_init() and open_root_dentry() and do some cleanups to avoid this issue. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-09 20:40:59 +08:00
ceph: no need to check return value of debugfs_create functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. This cleanup allows the return value of the functions to be made void, as no logic should care if these files succeed or not. Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Sage Weil <sage@redhat.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: ceph-devel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20190612145538.GA18772@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-12 22:55:38 +08:00
ceph_fs_debugfs_init(fsc);
ceph: fix dentry leak when failing to init debugfs When failing from ceph_fs_debugfs_init() in ceph_real_mount(), there is lack of dput of root_dentry and it causes slab errors, so change the calling order of ceph_fs_debugfs_init() and open_root_dentry() and do some cleanups to avoid this issue. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-09 20:40:59 +08:00
ceph: avoid accessing / when mounting a subpath Accessing / causes failuire if the client has caps that restrict path Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 14:53:05 +08:00
root = open_root_dentry(fsc, path, started);
ceph: fix mounting same fs multiple times Now __ceph_open_session() only accepts closed client. An opened client will tigger BUG_ON(). Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-12 13:20:48 +08:00
if (IS_ERR(root)) {
err = PTR_ERR(root);
goto out;
}
ceph: avoid accessing / when mounting a subpath Accessing / causes failuire if the client has caps that restrict path Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-09-14 14:53:05 +08:00
fsc->sb->s_root = dget(root);
ceph: fix uninitialized dentry pointer in ceph_real_mount() fs/ceph/super.c: In function ‘ceph_real_mount’: fs/ceph/super.c:818: warning: ‘root’ may be used uninitialized in this function If s_root is already valid, dentry pointer root is never initialized, and returned by ceph_real_mount(). This will cause a crash later when the caller dereferences the pointer. Fixes: ce2728aaa82bbeba ("ceph: avoid accessing / when mounting a subpath") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-10-13 23:15:37 +08:00
} else {
root = dget(fsc->sb->s_root);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsc->mount_state = CEPH_MOUNT_MOUNTED;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
dout("mount success\n");
convert ceph Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-07-26 20:17:55 +08:00
mutex_unlock(&fsc->client->mount_mutex);
return root;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: fix mounting same fs multiple times Now __ceph_open_session() only accepts closed client. An opened client will tigger BUG_ON(). Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-12 13:20:48 +08:00
out:
mutex_unlock(&fsc->client->mount_mutex);
return ERR_PTR(err);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
}
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
static int ceph_set_super(struct super_block *s, struct fs_context *fc)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
{
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
struct ceph_fs_client *fsc = s->s_fs_info;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
int ret;
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
dout("set_super %p\n", s);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: add new field max_file_size in ceph_fs_client In order to not bother to VFS and other specific filesystems, we decided to do offset validation inside ceph kernel client, so just simply set sb->s_maxbytes to MAX_LFS_FILESIZE so that it can successfully pass VFS check. We add new field max_file_size in ceph_fs_client to store real file size limit and doing proper check based on it. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-07-19 22:15:24 +08:00
s->s_maxbytes = MAX_LFS_FILESIZE;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: add acl for cephfs Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Reviewed-by: Li Wang <li.wang@ubuntykylin.com> Reviewed-by: Zheng Yan <zheng.z.yan@intel.com>
2013-11-11 15:18:03 +08:00
s->s_xattr = ceph_xattr_handlers;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
fsc->sb = s;
ceph: add new field max_file_size in ceph_fs_client In order to not bother to VFS and other specific filesystems, we decided to do offset validation inside ceph kernel client, so just simply set sb->s_maxbytes to MAX_LFS_FILESIZE so that it can successfully pass VFS check. We add new field max_file_size in ceph_fs_client to store real file size limit and doing proper check based on it. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-07-19 22:15:24 +08:00
fsc->max_file_size = 1ULL << 40; /* temp value until we get mdsmap */
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
s->s_op = &ceph_super_ops;
ceph: unify dentry_operations instances Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-29 09:52:50 +08:00
s->s_d_op = &ceph_dentry_ops;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
s->s_export_op = &ceph_export_ops;
ceph: initialize superblock s_time_gran to 1 Having granularity set to 1us results in having inode timestamps with a accurancy different from the fuse client (i.e. atime, ctime and mtime will always end with '000'). This patch normalizes this behaviour and sets the granularity to 1. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-06-27 21:51:22 +08:00
s->s_time_gran = 1;
fs: ceph: Initialize filesystem timestamp ranges Fill in the appropriate limits to avoid inconsistencies in the vfs cached inode times when timestamps are outside the permitted range. According to the disscussion in https://patchwork.kernel.org/patch/8308691/ we agreed to use unsigned 32 bit timestamps on ceph. Update the limits accordingly. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Jeff Layton <jlayton@kernel.org> Cc: zyan@redhat.com Cc: sage@redhat.com Cc: idryomov@gmail.com Cc: ceph-devel@vger.kernel.org
2019-03-22 05:34:38 +08:00
s->s_time_min = 0;
s->s_time_max = U32_MAX;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
ret = set_anon_super_fc(s, fc);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
if (ret != 0)
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fsc->sb = NULL;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
return ret;
}
/*
* share superblock if same fs AND options
*/
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
static int ceph_compare_super(struct super_block *sb, struct fs_context *fc)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
{
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
struct ceph_fs_client *new = fc->s_fs_info;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_mount_options *fsopt = new->mount_options;
struct ceph_options *opt = new->client->options;
ceph: skip existing superblocks that are blocklisted or shut down when mounting Currently when mounting, we may end up finding an existing superblock that corresponds to a blocklisted MDS client. This means that the new mount ends up being unusable. If we've found an existing superblock with a client that is already blocklisted, and the client is not configured to recover on its own, fail the match. Ditto if the superblock has been forcibly unmounted. While we're in here, also rename "other" to the more conventional "fsc". Cc: stable@vger.kernel.org URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499 Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-30 20:33:13 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
dout("ceph_compare_super %p\n", sb);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph: skip existing superblocks that are blocklisted or shut down when mounting Currently when mounting, we may end up finding an existing superblock that corresponds to a blocklisted MDS client. This means that the new mount ends up being unusable. If we've found an existing superblock with a client that is already blocklisted, and the client is not configured to recover on its own, fail the match. Ditto if the superblock has been forcibly unmounted. While we're in here, also rename "other" to the more conventional "fsc". Cc: stable@vger.kernel.org URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499 Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-30 20:33:13 +08:00
if (compare_mount_options(fsopt, opt, fsc)) {
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
dout("monitor(s)/mount options don't match\n");
return 0;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if ((opt->flags & CEPH_OPT_FSID) &&
ceph: skip existing superblocks that are blocklisted or shut down when mounting Currently when mounting, we may end up finding an existing superblock that corresponds to a blocklisted MDS client. This means that the new mount ends up being unusable. If we've found an existing superblock with a client that is already blocklisted, and the client is not configured to recover on its own, fail the match. Ditto if the superblock has been forcibly unmounted. While we're in here, also rename "other" to the more conventional "fsc". Cc: stable@vger.kernel.org URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499 Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-30 20:33:13 +08:00
ceph_fsid_compare(&opt->fsid, &fsc->client->fsid)) {
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
dout("fsid doesn't match\n");
return 0;
}
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (fc->sb_flags != (sb->s_flags & ~SB_BORN)) {
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
dout("flags differ\n");
return 0;
}
ceph: skip existing superblocks that are blocklisted or shut down when mounting Currently when mounting, we may end up finding an existing superblock that corresponds to a blocklisted MDS client. This means that the new mount ends up being unusable. If we've found an existing superblock with a client that is already blocklisted, and the client is not configured to recover on its own, fail the match. Ditto if the superblock has been forcibly unmounted. While we're in here, also rename "other" to the more conventional "fsc". Cc: stable@vger.kernel.org URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499 Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-30 20:33:13 +08:00
if (fsc->blocklisted && !ceph_test_mount_opt(fsc, CLEANRECOVER)) {
dout("client is blocklisted (and CLEANRECOVER is not set)\n");
return 0;
}
if (fsc->mount_state == CEPH_MOUNT_SHUTDOWN) {
dout("client has been forcibly unmounted\n");
return 0;
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
return 1;
}
/*
* construct our own bdi so we can control readahead, etc.
*/
ceph: fix atomic64_t initialization on ia64 bdi_seq is an atomic_long_t but we're using ATOMIC_INIT, which causes build failures on ia64. This patch fixes it to use ATOMIC_LONG_INIT. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-10 23:13:58 +08:00
static atomic_long_t bdi_seq = ATOMIC_LONG_INIT(0);
ceph: name bdi ceph-%d instead of major:minor The bdi_setup_and_register() helper doesn't help us since we bdi_init() in create_client() and bdi_register() only when sget() succeeds. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-05 07:39:35 +08:00
ceph: Convert to separately allocated bdi Allocate struct backing_dev_info separately instead of embedding it inside client structure. This unifies handling of bdi among users. CC: Ilya Dryomov <idryomov@gmail.com> CC: "Yan, Zheng" <zyan@redhat.com> CC: Sage Weil <sage@redhat.com> CC: ceph-devel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-12 18:24:33 +08:00
static int ceph_setup_bdi(struct super_block *sb, struct ceph_fs_client *fsc)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
{
int err;
ceph: Convert to separately allocated bdi Allocate struct backing_dev_info separately instead of embedding it inside client structure. This unifies handling of bdi among users. CC: Ilya Dryomov <idryomov@gmail.com> CC: "Yan, Zheng" <zyan@redhat.com> CC: Sage Weil <sage@redhat.com> CC: ceph-devel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-12 18:24:33 +08:00
err = super_setup_bdi_name(sb, "ceph-%ld",
atomic_long_inc_return(&bdi_seq));
if (err)
return err;
ceph: rename rsize -> rasize It controls readahead. Signed-off-by: Sage Weil <sage@newdream.net>
2011-08-04 23:03:44 +08:00
/* set ra_pages based on rasize mount option? */
ceph: validate correctness of some mount options Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-11 18:49:44 +08:00
sb->s_bdi->ra_pages = fsc->mount_options->rasize >> PAGE_SHIFT;
ceph: set up readahead size when rsize is not passed This should improve the default read performance, as without it readahead is practically disabled. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-07-23 02:12:28 +08:00
ceph: limit osd read size to CEPH_MSG_MAX_DATA_LEN libceph returns -EIO when read size > CEPH_MSG_MAX_DATA_LEN. Link: http://tracker.ceph.com/issues/20528 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-11 15:56:09 +08:00
/* set io_pages based on max osd read size */
sb->s_bdi->io_pages = fsc->mount_options->rsize >> PAGE_SHIFT;
ceph: set io_pages bdi hint This patch sets the io_pages bdi hint based on the rsize mount option. Without this patch large buffered reads (request size > max readahead) are processed sequentially in chunks of the readahead size (i.e. read requests are sent out up to the readahead size, then the do_generic_file_read() function waits until the first page is received). With this patch read requests are sent out at once up to the size specified in the rsize mount option (default: 64 MB). Signed-off-by: Andreas Gerstmayr <andreas.gerstmayr@catalysts.cc> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2017-01-10 21:17:56 +08:00
ceph: Convert to separately allocated bdi Allocate struct backing_dev_info separately instead of embedding it inside client structure. This unifies handling of bdi among users. CC: Ilya Dryomov <idryomov@gmail.com> CC: "Yan, Zheng" <zyan@redhat.com> CC: Sage Weil <sage@redhat.com> CC: ceph-devel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-12 18:24:33 +08:00
return 0;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
}
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
static int ceph_get_tree(struct fs_context *fc)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
{
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
struct ceph_parse_opts_ctx *pctx = fc->fs_private;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
struct super_block *sb;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc;
convert ceph Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-07-26 20:17:55 +08:00
struct dentry *res;
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
int (*compare_super)(struct super_block *, struct fs_context *) =
ceph_compare_super;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
int err;
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
dout("ceph_get_tree\n");
if (!fc->source)
ceph: use errorfc() and friends instead of spelling the prefix out Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-22 10:31:52 +08:00
return invalfc(fc, "No source");
ceph: add acl, noacl options for cephfs mount Make the 'acl' option dependent on having ACL support compiled in. Make the 'noacl' option work even without it so that one can always ask it to be off and not error out on mount when it is not supported. Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Signed-off-by: Sage Weil <sage@inktank.com>
2014-02-17 02:05:29 +08:00
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
/* create client (which we may/may not use) */
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fsc = create_fs_client(pctx->opts, pctx->copts);
pctx->opts = NULL;
pctx->copts = NULL;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (IS_ERR(fsc)) {
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
err = PTR_ERR(fsc);
ceph: allocate and parse mount args before client instance This simplifies much of the error handling during mount. It also means that we have the mount args before client creation, and we can initialize based on those options. Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-28 02:50:50 +08:00
goto out_final;
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
err = ceph_mdsc_init(fsc);
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (err < 0)
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
goto out;
if (ceph_test_opt(fsc->client, NOSHARE))
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
compare_super = NULL;
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fc->s_fs_info = fsc;
sb = sget_fc(fc, compare_super, ceph_set_super);
fc->s_fs_info = NULL;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
if (IS_ERR(sb)) {
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
err = PTR_ERR(sb);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
goto out;
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
if (ceph_sb_to_client(sb) != fsc) {
destroy_fs_client(fsc);
fsc = ceph_sb_to_client(sb);
dout("get_sb got existing client %p\n", fsc);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
} else {
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
dout("get_sb using new client %p\n", fsc);
ceph: Convert to separately allocated bdi Allocate struct backing_dev_info separately instead of embedding it inside client structure. This unifies handling of bdi among users. CC: Ilya Dryomov <idryomov@gmail.com> CC: "Yan, Zheng" <zyan@redhat.com> CC: Sage Weil <sage@redhat.com> CC: ceph-devel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-12 18:24:33 +08:00
err = ceph_setup_bdi(sb, fsc);
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
if (err < 0)
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
goto out_splat;
}
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
res = ceph_real_mount(fsc, fc);
if (IS_ERR(res)) {
err = PTR_ERR(res);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
goto out_splat;
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
}
convert ceph Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-07-26 20:17:55 +08:00
dout("root %p inode %p ino %llx.%llx\n", res,
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18 06:25:59 +08:00
d_inode(res), ceph_vinop(d_inode(res)));
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fc->root = fsc->sb->s_root;
return 0;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
out_splat:
ceph: check availability of mds cluster on mount after wait timeout If all the MDS daemons are down for some reason, then the first mount attempt will fail with EIO after the mount request times out. A mount attempt will also fail with EIO if all of the MDS's are laggy. This patch changes the code to return -EHOSTUNREACH in these situations and adds a pr_info error message to help the admin determine the cause. URL: https://tracker.ceph.com/issues/4386 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-11 09:29:40 +08:00
if (!ceph_mdsmap_is_cluster_available(fsc->mdsc->mdsmap)) {
pr_info("No mds server is up or the cluster is laggy\n");
err = -EHOSTUNREACH;
}
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph_mdsc_close_sessions(fsc->mdsc);
ceph: should use deactivate_locked_super() on failure exits Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-22 07:22:29 +08:00
deactivate_locked_super(sb);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
goto out_final;
out:
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
destroy_fs_client(fsc);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
out_final:
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
dout("ceph_get_tree fail %d\n", err);
return err;
}
static void ceph_free_fc(struct fs_context *fc)
{
struct ceph_parse_opts_ctx *pctx = fc->fs_private;
if (pctx) {
destroy_mount_options(pctx->opts);
ceph_destroy_options(pctx->copts);
kfree(pctx);
}
}
static int ceph_reconfigure_fc(struct fs_context *fc)
{
ceph: perform asynchronous unlink if we have sufficient caps The MDS is getting a new lock-caching facility that will allow it to cache the necessary locks to allow asynchronous directory operations. Since the CEPH_CAP_FILE_* caps are currently unused on directories, we can repurpose those bits for this purpose. When performing an unlink, if we have Fx on the parent directory, and CEPH_CAP_DIR_UNLINK (aka Fr), and we know that the dentry being removed is the primary link, then then we can fire off an unlink request immediately and don't need to wait on reply before returning. In that situation, just fix up the dcache and link count and return immediately after issuing the call to the MDS. This does mean that we need to hold an extra reference to the inode being unlinked, and extra references to the caps to avoid races. Those references are put and error handling is done in the r_callback routine. If the operation ends up failing, then set a writeback error on the directory inode, and the inode itself that can be fetched later by an fsync on the dir. The behavior of dir caps is slightly different from caps on normal files. Because these are just considered an optimization, if the session is reconnected, we will not automatically reclaim them. They are instead considered lost until we do another synchronous op in the parent directory. Async dirops are enabled via the "nowsync" mount option, which is patterned after the xfs "wsync" mount option. For now, the default is "wsync", but eventually we may flip that. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-04-03 03:35:56 +08:00
struct ceph_parse_opts_ctx *pctx = fc->fs_private;
struct ceph_mount_options *fsopt = pctx->opts;
struct ceph_fs_client *fsc = ceph_sb_to_client(fc->root->d_sb);
if (fsopt->flags & CEPH_MOUNT_OPT_ASYNC_DIROPS)
ceph_set_mount_opt(fsc, ASYNC_DIROPS);
else
ceph_clear_mount_opt(fsc, ASYNC_DIROPS);
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
sync_filesystem(fc->root->d_sb);
return 0;
}
static const struct fs_context_operations ceph_context_ops = {
.free = ceph_free_fc,
.parse_param = ceph_parse_mount_param,
.get_tree = ceph_get_tree,
.reconfigure = ceph_reconfigure_fc,
};
/*
* Set up the filesystem mount context.
*/
static int ceph_init_fs_context(struct fs_context *fc)
{
struct ceph_parse_opts_ctx *pctx;
struct ceph_mount_options *fsopt;
pctx = kzalloc(sizeof(*pctx), GFP_KERNEL);
if (!pctx)
return -ENOMEM;
pctx->copts = ceph_alloc_options();
if (!pctx->copts)
goto nomem;
pctx->opts = kzalloc(sizeof(*pctx->opts), GFP_KERNEL);
if (!pctx->opts)
goto nomem;
fsopt = pctx->opts;
fsopt->flags = CEPH_MOUNT_OPT_DEFAULT;
fsopt->wsize = CEPH_MAX_WRITE_SIZE;
fsopt->rsize = CEPH_MAX_READ_SIZE;
fsopt->rasize = CEPH_RASIZE_DEFAULT;
fsopt->snapdir_name = kstrdup(CEPH_SNAPDIRNAME_DEFAULT, GFP_KERNEL);
if (!fsopt->snapdir_name)
goto nomem;
fsopt->caps_wanted_delay_min = CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT;
fsopt->caps_wanted_delay_max = CEPH_CAPS_WANTED_DELAY_MAX_DEFAULT;
fsopt->max_readdir = CEPH_MAX_READDIR_DEFAULT;
fsopt->max_readdir_bytes = CEPH_MAX_READDIR_BYTES_DEFAULT;
fsopt->congestion_kb = default_congestion_kb();
ceph: noacl mount option is effectively ignored For the old mount API, the module parameters parseing function will be called in ceph_mount() and also just after the default posix acl flag set, so we can control to enable/disable it via the mount option. But for the new mount API, it will call the module parameters parseing function before ceph_get_tree(), so the posix acl will always be enabled. Fixes: 82995cc6c5ae ("libceph, rbd, ceph: convert to use the new mount API") Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-02-11 14:53:16 +08:00
#ifdef CONFIG_CEPH_FS_POSIX_ACL
fc->sb_flags |= SB_POSIXACL;
#endif
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
fc->fs_private = pctx;
fc->ops = &ceph_context_ops;
return 0;
nomem:
destroy_mount_options(pctx->opts);
ceph_destroy_options(pctx->copts);
kfree(pctx);
return -ENOMEM;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
}
static void ceph_kill_sb(struct super_block *s)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(s);
ceph: remove call to bdi_unregister bdi_destroy already does all the work, and if we delay freeing the anon bdev we can get away with just that single call. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-14 17:42:38 +08:00
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
dout("kill_sb %p\n", s);
ceph: remove call to bdi_unregister bdi_destroy already does all the work, and if we delay freeing the anon bdev we can get away with just that single call. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-14 17:42:38 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ceph_mdsc_pre_umount(fsc->mdsc);
ceph: flush pending works before shutdown super Pending works hold inode references, which cause "Busy inodes after unmount" warning. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-05-18 16:05:51 +08:00
flush_fs_workqueues(fsc);
ceph: use kill_anon_super helper ceph open-codes this around some other activity and the rationale for it isn't clear. There is no need to delay free_anon_bdev until the end of kill_sb. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-09-12 03:19:00 +08:00
kill_anon_super(s);
ceph: avoid invalid memory dereference in the middle of umount extra_mon_dispatch() and debugfs' foo_show functions dereference fsc->mdsc. we should clean up fsc->client->extra_mon_dispatch and debugfs before destroying fsc->mds. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-22 16:26:34 +08:00
fsc->client->extra_mon_dispatch = NULL;
ceph_fs_debugfs_cleanup(fsc);
ceph: new mount option that specifies fscache uniquifier Current ceph uses FSID as primary index key of fscache data. This allows ceph to retain cached data across remount. But this causes problem (kernel opps, fscache does not support sharing data) when a filesystem get mounted several times (with fscache enabled, with different mount options). The fix is adding a new mount option, which specifies uniquifier for fscache. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-06-27 11:57:56 +08:00
ceph_fscache_unregister_fs(fsc);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
destroy_fs_client(fsc);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
}
static struct file_system_type ceph_fs_type = {
.owner = THIS_MODULE,
.name = "ceph",
libceph, rbd, ceph: convert to use the new mount API Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-26 00:38:32 +08:00
.init_fs_context = ceph_init_fs_context,
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
.kill_sb = ceph_kill_sb,
.fs_flags = FS_RENAME_DOES_D_MOVE,
};
fs: Limit sys_mount to only request filesystem modules. Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 11:39:14 +08:00
MODULE_ALIAS_FS("ceph");
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: add helper function that forcibly reconnects to ceph cluster. It closes mds sessions, drop all caps and invalidates page caches, then use new entity address to reconnect to the cluster. After reconnect, all dirty data/metadata are dropped, file locks get lost sliently. Open files continue to work because client will try renewing caps on later read/write. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-25 20:16:44 +08:00
int ceph_force_reconnect(struct super_block *sb)
{
struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
int err = 0;
ceph: add new RECOVER mount_state when recovering session When recovering a session (a'la recover_session=clean), we want to do all of the operations that we do on a forced umount, but changing the mount state to SHUTDOWN is can cause queued MDS requests to fail when the session comes back. Most of those can idle until the session is recovered in this situation. Reserve SHUTDOWN state for forced umount, and make a new RECOVER state for the forced reconnect situation. Change several tests for equality with SHUTDOWN to test for that or RECOVER. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-09-25 19:55:39 +08:00
fsc->mount_state = CEPH_MOUNT_RECOVER;
__ceph_umount_begin(fsc);
ceph: add helper function that forcibly reconnects to ceph cluster. It closes mds sessions, drop all caps and invalidates page caches, then use new entity address to reconnect to the cluster. After reconnect, all dirty data/metadata are dropped, file locks get lost sliently. Open files continue to work because client will try renewing caps on later read/write. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-25 20:16:44 +08:00
/* Make sure all page caches get invalidated.
* see remove_session_caps_cb() */
flush_workqueue(fsc->inode_wq);
libceph, rbd, ceph: "blacklist" -> "blocklist" Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-09-14 19:39:19 +08:00
/* In case that we were blocklisted. This also reset
ceph: add helper function that forcibly reconnects to ceph cluster. It closes mds sessions, drop all caps and invalidates page caches, then use new entity address to reconnect to the cluster. After reconnect, all dirty data/metadata are dropped, file locks get lost sliently. Open files continue to work because client will try renewing caps on later read/write. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-25 20:16:44 +08:00
* all mon/osd connections */
ceph_reset_client_addr(fsc->client);
ceph_osdc_clear_abort_err(&fsc->client->osdc);
ceph: auto reconnect after blacklisted Make client use osd reply and session message to infer if itself is blacklisted. Client reconnect to cluster using new entity addr if it is blacklisted. Auto reconnect is limited to once every 30 minutes. Auto reconnect is disabled by default. It can be enabled/disabled by recover_session=<no|clean> mount option. In 'clean' mode, client drops any dirty data/metadata, invalidates page caches and invalidates all writable file handles. After reconnect, file locks become stale because MDS loses track of them. If an inode contains any stale file locks, read/write on the indoe are not allowed until applications release all stale file locks. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-25 20:16:47 +08:00
libceph, rbd, ceph: "blacklist" -> "blocklist" Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-09-14 19:39:19 +08:00
fsc->blocklisted = false;
ceph: add helper function that forcibly reconnects to ceph cluster. It closes mds sessions, drop all caps and invalidates page caches, then use new entity address to reconnect to the cluster. After reconnect, all dirty data/metadata are dropped, file locks get lost sliently. Open files continue to work because client will try renewing caps on later read/write. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-25 20:16:44 +08:00
fsc->mount_state = CEPH_MOUNT_MOUNTED;
if (sb->s_root) {
err = __ceph_do_getattr(d_inode(sb->s_root), NULL,
CEPH_STAT_CAP_INODE, true);
}
return err;
}
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
static int __init init_ceph(void)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
int ret = init_caches();
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
if (ret)
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
goto out;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: use fl->fl_file as owner identifier of flock and posix lock flock and posix lock should use fl->fl_file instead of process ID as owner identifier. (posix lock uses fl->fl_owner. fl->fl_owner is usually equal to fl->fl_file, but it also can be a customized value). The process ID of who holds the lock is just for F_GETLK fcntl(2). The fix is rename the 'pid' fields of struct ceph_mds_request_args and struct ceph_filelock to 'owner', rename 'pid_namespace' fields to 'pid'. Assign fl->fl_file to the 'owner' field of lock messages. We also set the most significant bit of the 'owner' field. MDS can use that bit to distinguish between old and new clients. The MDS counterpart of this patch modifies the flock code to not take the 'pid_namespace' into consideration when checking conflict locks. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-03-09 23:16:40 +08:00
ceph_flock_init();
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ret = register_filesystem(&ceph_fs_type);
if (ret)
ceph: remove unused vxattr length helpers ceph_listxattr() now calculates the length of vxattrs dynamically, so these helpers, which incorrectly ignore vxattr.exists_cb(), can be removed. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-04-18 20:15:49 +08:00
goto out_caches;
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
pr_info("loaded (mds proto %d)\n", CEPH_MDSC_PROTOCOL);
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
return 0;
ceph: remove unused vxattr length helpers ceph_listxattr() now calculates the length of vxattrs dynamically, so these helpers, which incorrectly ignore vxattr.exists_cb(), can be removed. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-04-18 20:15:49 +08:00
out_caches:
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
destroy_caches();
out:
return ret;
}
static void __exit exit_ceph(void)
{
dout("exit_ceph\n");
unregister_filesystem(&ceph_fs_type);
destroy_caches();
}
ceph: periodically send perf metrics to MDSes This will send the caps/read/write/metadata metrics to any available MDS once per second, which will be the same as the userland client. It will skip the MDS sessions which don't support the metric collection, as the MDSs will close socket connections when they get an unknown type message. We can disable the metric sending via the disable_send_metrics module parameter. [ jlayton: fix up endianness bug in ceph_mdsc_send_metrics() ] URL: https://tracker.ceph.com/issues/43215 Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-07-16 22:05:57 +08:00
static int param_set_metrics(const char *val, const struct kernel_param *kp)
{
struct ceph_fs_client *fsc;
int ret;
ret = param_set_bool(val, kp);
if (ret) {
pr_err("Failed to parse sending metrics switch value '%s'\n",
val);
return ret;
} else if (!disable_send_metrics) {
// wake up all the mds clients
spin_lock(&ceph_fsc_lock);
list_for_each_entry(fsc, &ceph_fsc_list, metric_wakeup) {
metric_schedule_delayed(&fsc->mdsc->metric);
}
spin_unlock(&ceph_fsc_lock);
}
return 0;
}
static const struct kernel_param_ops param_ops_metrics = {
.set = param_set_metrics,
.get = param_get_bool,
};
bool disable_send_metrics = false;
module_param_cb(disable_send_metrics, &param_ops_metrics, &disable_send_metrics, 0644);
MODULE_PARM_DESC(disable_send_metrics, "Enable sending perf metrics to ceph cluster (default: on)");
ceph: super.c Mount option parsing, client setup and teardown, and a few odds and ends (e.g., statfs). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:07 +08:00
module_init(init_ceph);
module_exit(exit_ceph);
MODULE_AUTHOR("Sage Weil <sage@newdream.net>");
MODULE_AUTHOR("Yehuda Sadeh <yehuda@hq.newdream.net>");
MODULE_AUTHOR("Patience Warnick <patience@newdream.net>");
MODULE_DESCRIPTION("Ceph filesystem for Linux");
MODULE_LICENSE("GPL");