OpenCloudOS-Kernel/drivers/net/wireless/ath/ath11k/core.c

1828 lines
45 KiB
C
Raw Normal View History

ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
* Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/remoteproc.h>
#include <linux/firmware.h>
#include <linux/of.h>
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
#include "core.h"
#include "dp_tx.h"
#include "dp_rx.h"
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
#include "debug.h"
#include "hif.h"
#include "wow.h"
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
unsigned int ath11k_debug_mask;
EXPORT_SYMBOL(ath11k_debug_mask);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
module_param_named(debug_mask, ath11k_debug_mask, uint, 0644);
MODULE_PARM_DESC(debug_mask, "Debugging mask");
static unsigned int ath11k_crypto_mode;
module_param_named(crypto_mode, ath11k_crypto_mode, uint, 0644);
MODULE_PARM_DESC(crypto_mode, "crypto mode: 0-hardware, 1-software");
/* frame mode values are mapped as per enum ath11k_hw_txrx_mode */
unsigned int ath11k_frame_mode = ATH11K_HW_TXRX_NATIVE_WIFI;
module_param_named(frame_mode, ath11k_frame_mode, uint, 0644);
MODULE_PARM_DESC(frame_mode,
"Datapath frame mode (0: raw, 1: native wifi (default), 2: ethernet)");
static const struct ath11k_hw_params ath11k_hw_params[] = {
{
.hw_rev = ATH11K_HW_IPQ8074,
.name = "ipq8074 hw2.0",
.fw = {
.dir = "IPQ8074/hw2.0",
.board_size = 256 * 1024,
.cal_offset = 128 * 1024,
},
.max_radios = 3,
.bdf_addr = 0x4B0C0000,
.hw_ops = &ipq8074_ops,
.ring_mask = &ath11k_hw_ring_mask_ipq8074,
.internal_sleep_clock = false,
.regs = &ipq8074_regs,
.qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_IPQ8074,
.host_ce_config = ath11k_host_ce_config_ipq8074,
.ce_count = 12,
.target_ce_config = ath11k_target_ce_config_wlan_ipq8074,
.target_ce_count = 11,
.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_ipq8074,
.svc_to_ce_map_len = 21,
.single_pdev_only = false,
.rxdma1_enable = true,
.num_rxmda_per_pdev = 1,
.rx_mac_buf_ring = false,
.vdev_start_delay = false,
.htt_peer_map_v2 = true,
.spectral = {
.fft_sz = 2,
/* HW bug, expected BIN size is 2 bytes but HW report as 4 bytes.
* so added pad size as 2 bytes to compensate the BIN size
*/
.fft_pad_sz = 2,
.summary_pad_sz = 0,
.fft_hdr_len = 16,
.max_fft_bins = 512,
},
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_MESH_POINT),
.supports_monitor = true,
.full_monitor_mode = false,
.supports_shadow_regs = false,
.idle_ps = false,
.supports_sta_ps = false,
.cold_boot_calib = true,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
.supports_suspend = false,
.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
.supports_regdb = false,
.fix_l1ss = true,
ath11k: Disabling credit flow for WMI path Firmware credit flow control is enabled for WMI control services, which expects available tokens should be acquired before sending a command to the target. Also the token gets released when firmware receives the command. This credit-based flow limits driver to send WMI command only when the token available which is causing WMI commands to timeout and return -EAGAIN, whereas firmware has enough capability to process the WMI command. To fix this Tx starvation issue, introduce the ability to disable the credit flow for the WMI path. The driver sends WMI configuration for disabling credit flow to firmware by two ways. 1. By using a global flag (HTC_MSG_SETUP_COMPLETE_EX_ID msg type flags) 2. By using a local flag (ATH11K_HTC_CONN_FLAGS_DISABLE_CREDIT_FLOW_CTRL = 1 << 3) Ath11k uses both these configurations to disable credit flow for the WMI path completely. Also added a hw_param member for credit flow control by which we can enable or disable it based on per-target basis. Currently we are disabling credit flow for IPQ8074, IPQ6018, and QCN9074 as recommended by firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1 Co-developed-by: Pravas Kumar Panda <kumarpan@codeaurora.org> Signed-off-by: Pravas Kumar Panda <kumarpan@codeaurora.org> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635156494-20059-1-git-send-email-quic_ppranees@quicinc.com
2021-11-15 17:50:52 +08:00
.credit_flow = false,
.max_tx_ring = DP_TCL_NUM_RING_MAX,
.hal_params = &ath11k_hw_hal_params_ipq8074,
.supports_dynamic_smps_6ghz = false,
.alloc_cacheable_memory = true,
ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855 Command "iw wls1 station dump" does not show each chain's rssi currently. If the rssi of each chain from mon status which parsed in function ath11k_hal_rx_parse_mon_status_tlv() is invalid, then ath11k send wmi cmd WMI_REQUEST_STATS_CMDID with flag WMI_REQUEST_RSSI_PER_CHAIN_STAT to firmware, and parse the rssi of chain in wmi WMI_UPDATE_STATS_EVENTID, then report them to mac80211. WMI_REQUEST_STATS_CMDID is only sent when CONFIG_ATH11K_DEBUGFS is set, it is only called by ath11k_mac_op_sta_statistics(). It does not effect performance and power consumption. Because after STATION connected to AP, it is only called every 6 seconds by NetworkManager in below stack. [ 797.005587] CPU: 0 PID: 701 Comm: NetworkManager Tainted: G W OE 5.13.0-rc6-wt-ath+ #2 [ 797.005596] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 797.005600] RIP: 0010:ath11k_mac_op_sta_statistics+0x2f/0x1b0 [ath11k] [ 797.005644] Code: 41 56 41 55 4c 8d aa 58 01 00 00 41 54 55 48 89 d5 53 48 8b 82 58 01 00 00 48 89 cb 4c 8b 70 20 49 8b 06 4c 8b a0 90 08 00 00 <0f> 0b 48 8b 82 b8 01 00 00 48 ba 00 00 00 00 01 00 00 00 48 89 81 [ 797.005651] RSP: 0018:ffffb1fc80a4b890 EFLAGS: 00010282 [ 797.005658] RAX: ffff8a5726200000 RBX: ffffb1fc80a4b958 RCX: ffffb1fc80a4b958 [ 797.005664] RDX: ffff8a5726a609f0 RSI: ffff8a581247f598 RDI: ffff8a5702878800 [ 797.005668] RBP: ffff8a5726a609f0 R08: 0000000000000000 R09: 0000000000000000 [ 797.005672] R10: 0000000000000000 R11: 0000000000000007 R12: 02dd68024f75f480 [ 797.005676] R13: ffff8a5726a60b48 R14: ffff8a5702879f40 R15: ffff8a5726a60000 [ 797.005681] FS: 00007f632c52a380(0000) GS:ffff8a583a200000(0000) knlGS:0000000000000000 [ 797.005687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 797.005692] CR2: 00007fb025d69000 CR3: 00000001124f6005 CR4: 00000000000606f0 [ 797.005698] Call Trace: [ 797.005710] sta_set_sinfo+0xa7/0xb80 [mac80211] [ 797.005820] ieee80211_get_station+0x50/0x70 [mac80211] [ 797.005925] nl80211_get_station+0xd1/0x200 [cfg80211] [ 797.006045] genl_family_rcv_msg_doit.isra.15+0x111/0x140 [ 797.006059] genl_rcv_msg+0xe6/0x1e0 [ 797.006065] ? nl80211_dump_station+0x220/0x220 [cfg80211] [ 797.006223] ? nl80211_send_station.isra.72+0xf50/0xf50 [cfg80211] [ 797.006348] ? genl_family_rcv_msg_doit.isra.15+0x140/0x140 [ 797.006355] netlink_rcv_skb+0xb9/0xf0 [ 797.006363] genl_rcv+0x24/0x40 [ 797.006369] netlink_unicast+0x18e/0x290 [ 797.006375] netlink_sendmsg+0x30f/0x450 [ 797.006382] sock_sendmsg+0x5b/0x60 [ 797.006393] ____sys_sendmsg+0x219/0x240 [ 797.006403] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006413] ? ____sys_recvmsg+0xf5/0x190 [ 797.006422] ___sys_sendmsg+0x88/0xd0 [ 797.006432] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006443] ? ___sys_recvmsg+0x9e/0xd0 [ 797.006454] ? __fget_files+0x58/0x90 [ 797.006461] ? __fget_light+0x2d/0x70 [ 797.006466] ? do_epoll_wait+0xce/0x720 [ 797.006476] ? __sys_sendmsg+0x63/0xa0 [ 797.006485] __sys_sendmsg+0x63/0xa0 [ 797.006497] do_syscall_64+0x3c/0xb0 [ 797.006509] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 797.006519] RIP: 0033:0x7f632d99912d [ 797.006526] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48 [ 797.006533] RSP: 002b:00007ffd80808c00 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 797.006540] RAX: ffffffffffffffda RBX: 0000563dab99d840 RCX: 00007f632d99912d [ 797.006545] RDX: 0000000000000000 RSI: 00007ffd80808c50 RDI: 000000000000000b [ 797.006549] RBP: 00007ffd80808c50 R08: 0000000000000000 R09: 0000000000001000 [ 797.006552] R10: 0000563dab96f010 R11: 0000000000000293 R12: 0000563dab99d840 [ 797.006556] R13: 0000563dabbb28c0 R14: 00007f632dad4280 R15: 0000563dabab11c0 [ 797.006563] ---[ end trace c9dcf08920c9945c ]--- Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211215090944.19729-1-quic_wgong@quicinc.com
2021-12-18 02:27:21 +08:00
.supports_rssi_stats = false,
.fw_wmi_diag_event = false,
.current_cc_support = false,
.dbr_debug_support = true,
.global_reset = false,
.bios_sar_capa = NULL,
.m3_fw_support = false,
.fixed_bdf_addr = true,
.fixed_mem_region = true,
.static_window_map = false,
.hybrid_bus_type = false,
.fixed_fw_mem = false,
.support_off_channel_tx = false,
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
},
{
.hw_rev = ATH11K_HW_IPQ6018_HW10,
.name = "ipq6018 hw1.0",
.fw = {
.dir = "IPQ6018/hw1.0",
.board_size = 256 * 1024,
.cal_offset = 128 * 1024,
},
.max_radios = 2,
.bdf_addr = 0x4ABC0000,
.hw_ops = &ipq6018_ops,
.ring_mask = &ath11k_hw_ring_mask_ipq8074,
.internal_sleep_clock = false,
.regs = &ipq8074_regs,
.qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_IPQ8074,
.host_ce_config = ath11k_host_ce_config_ipq8074,
.ce_count = 12,
.target_ce_config = ath11k_target_ce_config_wlan_ipq8074,
.target_ce_count = 11,
.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_ipq6018,
.svc_to_ce_map_len = 19,
.single_pdev_only = false,
.rxdma1_enable = true,
.num_rxmda_per_pdev = 1,
.rx_mac_buf_ring = false,
.vdev_start_delay = false,
.htt_peer_map_v2 = true,
.spectral = {
.fft_sz = 4,
.fft_pad_sz = 0,
.summary_pad_sz = 0,
.fft_hdr_len = 16,
.max_fft_bins = 512,
},
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_MESH_POINT),
.supports_monitor = true,
.full_monitor_mode = false,
.supports_shadow_regs = false,
.idle_ps = false,
.supports_sta_ps = false,
.cold_boot_calib = true,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
.supports_suspend = false,
.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
.supports_regdb = false,
.fix_l1ss = true,
ath11k: Disabling credit flow for WMI path Firmware credit flow control is enabled for WMI control services, which expects available tokens should be acquired before sending a command to the target. Also the token gets released when firmware receives the command. This credit-based flow limits driver to send WMI command only when the token available which is causing WMI commands to timeout and return -EAGAIN, whereas firmware has enough capability to process the WMI command. To fix this Tx starvation issue, introduce the ability to disable the credit flow for the WMI path. The driver sends WMI configuration for disabling credit flow to firmware by two ways. 1. By using a global flag (HTC_MSG_SETUP_COMPLETE_EX_ID msg type flags) 2. By using a local flag (ATH11K_HTC_CONN_FLAGS_DISABLE_CREDIT_FLOW_CTRL = 1 << 3) Ath11k uses both these configurations to disable credit flow for the WMI path completely. Also added a hw_param member for credit flow control by which we can enable or disable it based on per-target basis. Currently we are disabling credit flow for IPQ8074, IPQ6018, and QCN9074 as recommended by firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1 Co-developed-by: Pravas Kumar Panda <kumarpan@codeaurora.org> Signed-off-by: Pravas Kumar Panda <kumarpan@codeaurora.org> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635156494-20059-1-git-send-email-quic_ppranees@quicinc.com
2021-11-15 17:50:52 +08:00
.credit_flow = false,
.max_tx_ring = DP_TCL_NUM_RING_MAX,
.hal_params = &ath11k_hw_hal_params_ipq8074,
.supports_dynamic_smps_6ghz = false,
.alloc_cacheable_memory = true,
ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855 Command "iw wls1 station dump" does not show each chain's rssi currently. If the rssi of each chain from mon status which parsed in function ath11k_hal_rx_parse_mon_status_tlv() is invalid, then ath11k send wmi cmd WMI_REQUEST_STATS_CMDID with flag WMI_REQUEST_RSSI_PER_CHAIN_STAT to firmware, and parse the rssi of chain in wmi WMI_UPDATE_STATS_EVENTID, then report them to mac80211. WMI_REQUEST_STATS_CMDID is only sent when CONFIG_ATH11K_DEBUGFS is set, it is only called by ath11k_mac_op_sta_statistics(). It does not effect performance and power consumption. Because after STATION connected to AP, it is only called every 6 seconds by NetworkManager in below stack. [ 797.005587] CPU: 0 PID: 701 Comm: NetworkManager Tainted: G W OE 5.13.0-rc6-wt-ath+ #2 [ 797.005596] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 797.005600] RIP: 0010:ath11k_mac_op_sta_statistics+0x2f/0x1b0 [ath11k] [ 797.005644] Code: 41 56 41 55 4c 8d aa 58 01 00 00 41 54 55 48 89 d5 53 48 8b 82 58 01 00 00 48 89 cb 4c 8b 70 20 49 8b 06 4c 8b a0 90 08 00 00 <0f> 0b 48 8b 82 b8 01 00 00 48 ba 00 00 00 00 01 00 00 00 48 89 81 [ 797.005651] RSP: 0018:ffffb1fc80a4b890 EFLAGS: 00010282 [ 797.005658] RAX: ffff8a5726200000 RBX: ffffb1fc80a4b958 RCX: ffffb1fc80a4b958 [ 797.005664] RDX: ffff8a5726a609f0 RSI: ffff8a581247f598 RDI: ffff8a5702878800 [ 797.005668] RBP: ffff8a5726a609f0 R08: 0000000000000000 R09: 0000000000000000 [ 797.005672] R10: 0000000000000000 R11: 0000000000000007 R12: 02dd68024f75f480 [ 797.005676] R13: ffff8a5726a60b48 R14: ffff8a5702879f40 R15: ffff8a5726a60000 [ 797.005681] FS: 00007f632c52a380(0000) GS:ffff8a583a200000(0000) knlGS:0000000000000000 [ 797.005687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 797.005692] CR2: 00007fb025d69000 CR3: 00000001124f6005 CR4: 00000000000606f0 [ 797.005698] Call Trace: [ 797.005710] sta_set_sinfo+0xa7/0xb80 [mac80211] [ 797.005820] ieee80211_get_station+0x50/0x70 [mac80211] [ 797.005925] nl80211_get_station+0xd1/0x200 [cfg80211] [ 797.006045] genl_family_rcv_msg_doit.isra.15+0x111/0x140 [ 797.006059] genl_rcv_msg+0xe6/0x1e0 [ 797.006065] ? nl80211_dump_station+0x220/0x220 [cfg80211] [ 797.006223] ? nl80211_send_station.isra.72+0xf50/0xf50 [cfg80211] [ 797.006348] ? genl_family_rcv_msg_doit.isra.15+0x140/0x140 [ 797.006355] netlink_rcv_skb+0xb9/0xf0 [ 797.006363] genl_rcv+0x24/0x40 [ 797.006369] netlink_unicast+0x18e/0x290 [ 797.006375] netlink_sendmsg+0x30f/0x450 [ 797.006382] sock_sendmsg+0x5b/0x60 [ 797.006393] ____sys_sendmsg+0x219/0x240 [ 797.006403] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006413] ? ____sys_recvmsg+0xf5/0x190 [ 797.006422] ___sys_sendmsg+0x88/0xd0 [ 797.006432] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006443] ? ___sys_recvmsg+0x9e/0xd0 [ 797.006454] ? __fget_files+0x58/0x90 [ 797.006461] ? __fget_light+0x2d/0x70 [ 797.006466] ? do_epoll_wait+0xce/0x720 [ 797.006476] ? __sys_sendmsg+0x63/0xa0 [ 797.006485] __sys_sendmsg+0x63/0xa0 [ 797.006497] do_syscall_64+0x3c/0xb0 [ 797.006509] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 797.006519] RIP: 0033:0x7f632d99912d [ 797.006526] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48 [ 797.006533] RSP: 002b:00007ffd80808c00 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 797.006540] RAX: ffffffffffffffda RBX: 0000563dab99d840 RCX: 00007f632d99912d [ 797.006545] RDX: 0000000000000000 RSI: 00007ffd80808c50 RDI: 000000000000000b [ 797.006549] RBP: 00007ffd80808c50 R08: 0000000000000000 R09: 0000000000001000 [ 797.006552] R10: 0000563dab96f010 R11: 0000000000000293 R12: 0000563dab99d840 [ 797.006556] R13: 0000563dabbb28c0 R14: 00007f632dad4280 R15: 0000563dabab11c0 [ 797.006563] ---[ end trace c9dcf08920c9945c ]--- Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211215090944.19729-1-quic_wgong@quicinc.com
2021-12-18 02:27:21 +08:00
.supports_rssi_stats = false,
.fw_wmi_diag_event = false,
.current_cc_support = false,
.dbr_debug_support = true,
.global_reset = false,
.bios_sar_capa = NULL,
.m3_fw_support = false,
.fixed_bdf_addr = true,
.fixed_mem_region = true,
.static_window_map = false,
.hybrid_bus_type = false,
.fixed_fw_mem = false,
.support_off_channel_tx = false,
},
{
.name = "qca6390 hw2.0",
.hw_rev = ATH11K_HW_QCA6390_HW20,
.fw = {
.dir = "QCA6390/hw2.0",
.board_size = 256 * 1024,
.cal_offset = 128 * 1024,
},
.max_radios = 3,
.bdf_addr = 0x4B0C0000,
.hw_ops = &qca6390_ops,
.ring_mask = &ath11k_hw_ring_mask_qca6390,
.internal_sleep_clock = true,
.regs = &qca6390_regs,
.qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCA6390,
.host_ce_config = ath11k_host_ce_config_qca6390,
.ce_count = 9,
.target_ce_config = ath11k_target_ce_config_wlan_qca6390,
.target_ce_count = 9,
.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_qca6390,
.svc_to_ce_map_len = 14,
.single_pdev_only = true,
.rxdma1_enable = false,
.num_rxmda_per_pdev = 2,
.rx_mac_buf_ring = true,
.vdev_start_delay = true,
.htt_peer_map_v2 = false,
.spectral = {
.fft_sz = 0,
.fft_pad_sz = 0,
.summary_pad_sz = 0,
.fft_hdr_len = 0,
.max_fft_bins = 0,
},
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP),
.supports_monitor = false,
.full_monitor_mode = false,
.supports_shadow_regs = true,
.idle_ps = true,
.supports_sta_ps = true,
.cold_boot_calib = false,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
.supports_suspend = true,
.hal_desc_sz = sizeof(struct hal_rx_desc_ipq8074),
.supports_regdb = false,
.fix_l1ss = true,
ath11k: Disabling credit flow for WMI path Firmware credit flow control is enabled for WMI control services, which expects available tokens should be acquired before sending a command to the target. Also the token gets released when firmware receives the command. This credit-based flow limits driver to send WMI command only when the token available which is causing WMI commands to timeout and return -EAGAIN, whereas firmware has enough capability to process the WMI command. To fix this Tx starvation issue, introduce the ability to disable the credit flow for the WMI path. The driver sends WMI configuration for disabling credit flow to firmware by two ways. 1. By using a global flag (HTC_MSG_SETUP_COMPLETE_EX_ID msg type flags) 2. By using a local flag (ATH11K_HTC_CONN_FLAGS_DISABLE_CREDIT_FLOW_CTRL = 1 << 3) Ath11k uses both these configurations to disable credit flow for the WMI path completely. Also added a hw_param member for credit flow control by which we can enable or disable it based on per-target basis. Currently we are disabling credit flow for IPQ8074, IPQ6018, and QCN9074 as recommended by firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1 Co-developed-by: Pravas Kumar Panda <kumarpan@codeaurora.org> Signed-off-by: Pravas Kumar Panda <kumarpan@codeaurora.org> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635156494-20059-1-git-send-email-quic_ppranees@quicinc.com
2021-11-15 17:50:52 +08:00
.credit_flow = true,
.max_tx_ring = DP_TCL_NUM_RING_MAX_QCA6390,
.hal_params = &ath11k_hw_hal_params_qca6390,
.supports_dynamic_smps_6ghz = false,
.alloc_cacheable_memory = false,
ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855 Command "iw wls1 station dump" does not show each chain's rssi currently. If the rssi of each chain from mon status which parsed in function ath11k_hal_rx_parse_mon_status_tlv() is invalid, then ath11k send wmi cmd WMI_REQUEST_STATS_CMDID with flag WMI_REQUEST_RSSI_PER_CHAIN_STAT to firmware, and parse the rssi of chain in wmi WMI_UPDATE_STATS_EVENTID, then report them to mac80211. WMI_REQUEST_STATS_CMDID is only sent when CONFIG_ATH11K_DEBUGFS is set, it is only called by ath11k_mac_op_sta_statistics(). It does not effect performance and power consumption. Because after STATION connected to AP, it is only called every 6 seconds by NetworkManager in below stack. [ 797.005587] CPU: 0 PID: 701 Comm: NetworkManager Tainted: G W OE 5.13.0-rc6-wt-ath+ #2 [ 797.005596] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 797.005600] RIP: 0010:ath11k_mac_op_sta_statistics+0x2f/0x1b0 [ath11k] [ 797.005644] Code: 41 56 41 55 4c 8d aa 58 01 00 00 41 54 55 48 89 d5 53 48 8b 82 58 01 00 00 48 89 cb 4c 8b 70 20 49 8b 06 4c 8b a0 90 08 00 00 <0f> 0b 48 8b 82 b8 01 00 00 48 ba 00 00 00 00 01 00 00 00 48 89 81 [ 797.005651] RSP: 0018:ffffb1fc80a4b890 EFLAGS: 00010282 [ 797.005658] RAX: ffff8a5726200000 RBX: ffffb1fc80a4b958 RCX: ffffb1fc80a4b958 [ 797.005664] RDX: ffff8a5726a609f0 RSI: ffff8a581247f598 RDI: ffff8a5702878800 [ 797.005668] RBP: ffff8a5726a609f0 R08: 0000000000000000 R09: 0000000000000000 [ 797.005672] R10: 0000000000000000 R11: 0000000000000007 R12: 02dd68024f75f480 [ 797.005676] R13: ffff8a5726a60b48 R14: ffff8a5702879f40 R15: ffff8a5726a60000 [ 797.005681] FS: 00007f632c52a380(0000) GS:ffff8a583a200000(0000) knlGS:0000000000000000 [ 797.005687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 797.005692] CR2: 00007fb025d69000 CR3: 00000001124f6005 CR4: 00000000000606f0 [ 797.005698] Call Trace: [ 797.005710] sta_set_sinfo+0xa7/0xb80 [mac80211] [ 797.005820] ieee80211_get_station+0x50/0x70 [mac80211] [ 797.005925] nl80211_get_station+0xd1/0x200 [cfg80211] [ 797.006045] genl_family_rcv_msg_doit.isra.15+0x111/0x140 [ 797.006059] genl_rcv_msg+0xe6/0x1e0 [ 797.006065] ? nl80211_dump_station+0x220/0x220 [cfg80211] [ 797.006223] ? nl80211_send_station.isra.72+0xf50/0xf50 [cfg80211] [ 797.006348] ? genl_family_rcv_msg_doit.isra.15+0x140/0x140 [ 797.006355] netlink_rcv_skb+0xb9/0xf0 [ 797.006363] genl_rcv+0x24/0x40 [ 797.006369] netlink_unicast+0x18e/0x290 [ 797.006375] netlink_sendmsg+0x30f/0x450 [ 797.006382] sock_sendmsg+0x5b/0x60 [ 797.006393] ____sys_sendmsg+0x219/0x240 [ 797.006403] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006413] ? ____sys_recvmsg+0xf5/0x190 [ 797.006422] ___sys_sendmsg+0x88/0xd0 [ 797.006432] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006443] ? ___sys_recvmsg+0x9e/0xd0 [ 797.006454] ? __fget_files+0x58/0x90 [ 797.006461] ? __fget_light+0x2d/0x70 [ 797.006466] ? do_epoll_wait+0xce/0x720 [ 797.006476] ? __sys_sendmsg+0x63/0xa0 [ 797.006485] __sys_sendmsg+0x63/0xa0 [ 797.006497] do_syscall_64+0x3c/0xb0 [ 797.006509] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 797.006519] RIP: 0033:0x7f632d99912d [ 797.006526] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48 [ 797.006533] RSP: 002b:00007ffd80808c00 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 797.006540] RAX: ffffffffffffffda RBX: 0000563dab99d840 RCX: 00007f632d99912d [ 797.006545] RDX: 0000000000000000 RSI: 00007ffd80808c50 RDI: 000000000000000b [ 797.006549] RBP: 00007ffd80808c50 R08: 0000000000000000 R09: 0000000000001000 [ 797.006552] R10: 0000563dab96f010 R11: 0000000000000293 R12: 0000563dab99d840 [ 797.006556] R13: 0000563dabbb28c0 R14: 00007f632dad4280 R15: 0000563dabab11c0 [ 797.006563] ---[ end trace c9dcf08920c9945c ]--- Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211215090944.19729-1-quic_wgong@quicinc.com
2021-12-18 02:27:21 +08:00
.supports_rssi_stats = true,
.fw_wmi_diag_event = true,
.current_cc_support = true,
.dbr_debug_support = false,
.global_reset = true,
.bios_sar_capa = NULL,
.m3_fw_support = true,
.fixed_bdf_addr = false,
.fixed_mem_region = false,
.static_window_map = false,
.hybrid_bus_type = false,
.fixed_fw_mem = false,
.support_off_channel_tx = true,
},
{
.name = "qcn9074 hw1.0",
.hw_rev = ATH11K_HW_QCN9074_HW10,
.fw = {
.dir = "QCN9074/hw1.0",
.board_size = 256 * 1024,
.cal_offset = 128 * 1024,
},
.max_radios = 1,
.single_pdev_only = false,
.qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCN9074,
.hw_ops = &qcn9074_ops,
.ring_mask = &ath11k_hw_ring_mask_qcn9074,
.internal_sleep_clock = false,
.regs = &qcn9074_regs,
.host_ce_config = ath11k_host_ce_config_qcn9074,
.ce_count = 6,
.target_ce_config = ath11k_target_ce_config_wlan_qcn9074,
.target_ce_count = 9,
.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_qcn9074,
.svc_to_ce_map_len = 18,
.rxdma1_enable = true,
.num_rxmda_per_pdev = 1,
.rx_mac_buf_ring = false,
.vdev_start_delay = false,
.htt_peer_map_v2 = true,
.spectral = {
.fft_sz = 2,
.fft_pad_sz = 0,
.summary_pad_sz = 16,
.fft_hdr_len = 24,
.max_fft_bins = 1024,
},
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_MESH_POINT),
.supports_monitor = true,
.full_monitor_mode = true,
.supports_shadow_regs = false,
.idle_ps = false,
.supports_sta_ps = false,
.cold_boot_calib = false,
.fw_mem_mode = 2,
.num_vdevs = 8,
.num_peers = 128,
.supports_suspend = false,
.hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074),
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
.supports_regdb = false,
.fix_l1ss = true,
ath11k: Disabling credit flow for WMI path Firmware credit flow control is enabled for WMI control services, which expects available tokens should be acquired before sending a command to the target. Also the token gets released when firmware receives the command. This credit-based flow limits driver to send WMI command only when the token available which is causing WMI commands to timeout and return -EAGAIN, whereas firmware has enough capability to process the WMI command. To fix this Tx starvation issue, introduce the ability to disable the credit flow for the WMI path. The driver sends WMI configuration for disabling credit flow to firmware by two ways. 1. By using a global flag (HTC_MSG_SETUP_COMPLETE_EX_ID msg type flags) 2. By using a local flag (ATH11K_HTC_CONN_FLAGS_DISABLE_CREDIT_FLOW_CTRL = 1 << 3) Ath11k uses both these configurations to disable credit flow for the WMI path completely. Also added a hw_param member for credit flow control by which we can enable or disable it based on per-target basis. Currently we are disabling credit flow for IPQ8074, IPQ6018, and QCN9074 as recommended by firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1 Co-developed-by: Pravas Kumar Panda <kumarpan@codeaurora.org> Signed-off-by: Pravas Kumar Panda <kumarpan@codeaurora.org> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635156494-20059-1-git-send-email-quic_ppranees@quicinc.com
2021-11-15 17:50:52 +08:00
.credit_flow = false,
.max_tx_ring = DP_TCL_NUM_RING_MAX,
.hal_params = &ath11k_hw_hal_params_ipq8074,
.supports_dynamic_smps_6ghz = true,
.alloc_cacheable_memory = true,
ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855 Command "iw wls1 station dump" does not show each chain's rssi currently. If the rssi of each chain from mon status which parsed in function ath11k_hal_rx_parse_mon_status_tlv() is invalid, then ath11k send wmi cmd WMI_REQUEST_STATS_CMDID with flag WMI_REQUEST_RSSI_PER_CHAIN_STAT to firmware, and parse the rssi of chain in wmi WMI_UPDATE_STATS_EVENTID, then report them to mac80211. WMI_REQUEST_STATS_CMDID is only sent when CONFIG_ATH11K_DEBUGFS is set, it is only called by ath11k_mac_op_sta_statistics(). It does not effect performance and power consumption. Because after STATION connected to AP, it is only called every 6 seconds by NetworkManager in below stack. [ 797.005587] CPU: 0 PID: 701 Comm: NetworkManager Tainted: G W OE 5.13.0-rc6-wt-ath+ #2 [ 797.005596] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 797.005600] RIP: 0010:ath11k_mac_op_sta_statistics+0x2f/0x1b0 [ath11k] [ 797.005644] Code: 41 56 41 55 4c 8d aa 58 01 00 00 41 54 55 48 89 d5 53 48 8b 82 58 01 00 00 48 89 cb 4c 8b 70 20 49 8b 06 4c 8b a0 90 08 00 00 <0f> 0b 48 8b 82 b8 01 00 00 48 ba 00 00 00 00 01 00 00 00 48 89 81 [ 797.005651] RSP: 0018:ffffb1fc80a4b890 EFLAGS: 00010282 [ 797.005658] RAX: ffff8a5726200000 RBX: ffffb1fc80a4b958 RCX: ffffb1fc80a4b958 [ 797.005664] RDX: ffff8a5726a609f0 RSI: ffff8a581247f598 RDI: ffff8a5702878800 [ 797.005668] RBP: ffff8a5726a609f0 R08: 0000000000000000 R09: 0000000000000000 [ 797.005672] R10: 0000000000000000 R11: 0000000000000007 R12: 02dd68024f75f480 [ 797.005676] R13: ffff8a5726a60b48 R14: ffff8a5702879f40 R15: ffff8a5726a60000 [ 797.005681] FS: 00007f632c52a380(0000) GS:ffff8a583a200000(0000) knlGS:0000000000000000 [ 797.005687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 797.005692] CR2: 00007fb025d69000 CR3: 00000001124f6005 CR4: 00000000000606f0 [ 797.005698] Call Trace: [ 797.005710] sta_set_sinfo+0xa7/0xb80 [mac80211] [ 797.005820] ieee80211_get_station+0x50/0x70 [mac80211] [ 797.005925] nl80211_get_station+0xd1/0x200 [cfg80211] [ 797.006045] genl_family_rcv_msg_doit.isra.15+0x111/0x140 [ 797.006059] genl_rcv_msg+0xe6/0x1e0 [ 797.006065] ? nl80211_dump_station+0x220/0x220 [cfg80211] [ 797.006223] ? nl80211_send_station.isra.72+0xf50/0xf50 [cfg80211] [ 797.006348] ? genl_family_rcv_msg_doit.isra.15+0x140/0x140 [ 797.006355] netlink_rcv_skb+0xb9/0xf0 [ 797.006363] genl_rcv+0x24/0x40 [ 797.006369] netlink_unicast+0x18e/0x290 [ 797.006375] netlink_sendmsg+0x30f/0x450 [ 797.006382] sock_sendmsg+0x5b/0x60 [ 797.006393] ____sys_sendmsg+0x219/0x240 [ 797.006403] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006413] ? ____sys_recvmsg+0xf5/0x190 [ 797.006422] ___sys_sendmsg+0x88/0xd0 [ 797.006432] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006443] ? ___sys_recvmsg+0x9e/0xd0 [ 797.006454] ? __fget_files+0x58/0x90 [ 797.006461] ? __fget_light+0x2d/0x70 [ 797.006466] ? do_epoll_wait+0xce/0x720 [ 797.006476] ? __sys_sendmsg+0x63/0xa0 [ 797.006485] __sys_sendmsg+0x63/0xa0 [ 797.006497] do_syscall_64+0x3c/0xb0 [ 797.006509] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 797.006519] RIP: 0033:0x7f632d99912d [ 797.006526] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48 [ 797.006533] RSP: 002b:00007ffd80808c00 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 797.006540] RAX: ffffffffffffffda RBX: 0000563dab99d840 RCX: 00007f632d99912d [ 797.006545] RDX: 0000000000000000 RSI: 00007ffd80808c50 RDI: 000000000000000b [ 797.006549] RBP: 00007ffd80808c50 R08: 0000000000000000 R09: 0000000000001000 [ 797.006552] R10: 0000563dab96f010 R11: 0000000000000293 R12: 0000563dab99d840 [ 797.006556] R13: 0000563dabbb28c0 R14: 00007f632dad4280 R15: 0000563dabab11c0 [ 797.006563] ---[ end trace c9dcf08920c9945c ]--- Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211215090944.19729-1-quic_wgong@quicinc.com
2021-12-18 02:27:21 +08:00
.supports_rssi_stats = false,
.fw_wmi_diag_event = false,
.current_cc_support = false,
.dbr_debug_support = true,
.global_reset = false,
.bios_sar_capa = NULL,
.m3_fw_support = true,
.fixed_bdf_addr = false,
.fixed_mem_region = false,
.static_window_map = true,
.hybrid_bus_type = false,
.fixed_fw_mem = false,
.support_off_channel_tx = false,
},
{
.name = "wcn6855 hw2.0",
.hw_rev = ATH11K_HW_WCN6855_HW20,
.fw = {
.dir = "WCN6855/hw2.0",
.board_size = 256 * 1024,
.cal_offset = 128 * 1024,
},
.max_radios = 3,
.bdf_addr = 0x4B0C0000,
.hw_ops = &wcn6855_ops,
.ring_mask = &ath11k_hw_ring_mask_qca6390,
.internal_sleep_clock = true,
.regs = &wcn6855_regs,
.qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCA6390,
.host_ce_config = ath11k_host_ce_config_qca6390,
.ce_count = 9,
.target_ce_config = ath11k_target_ce_config_wlan_qca6390,
.target_ce_count = 9,
.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_qca6390,
.svc_to_ce_map_len = 14,
.single_pdev_only = true,
.rxdma1_enable = false,
.num_rxmda_per_pdev = 2,
.rx_mac_buf_ring = true,
.vdev_start_delay = true,
.htt_peer_map_v2 = false,
.spectral = {
.fft_sz = 0,
.fft_pad_sz = 0,
.summary_pad_sz = 0,
.fft_hdr_len = 0,
.max_fft_bins = 0,
},
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP),
.supports_monitor = false,
.full_monitor_mode = false,
.supports_shadow_regs = true,
.idle_ps = true,
.supports_sta_ps = true,
.cold_boot_calib = false,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
.supports_suspend = true,
.hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855),
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
.supports_regdb = true,
.fix_l1ss = false,
.credit_flow = true,
.max_tx_ring = DP_TCL_NUM_RING_MAX_QCA6390,
.hal_params = &ath11k_hw_hal_params_qca6390,
.supports_dynamic_smps_6ghz = false,
.alloc_cacheable_memory = false,
ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855 Command "iw wls1 station dump" does not show each chain's rssi currently. If the rssi of each chain from mon status which parsed in function ath11k_hal_rx_parse_mon_status_tlv() is invalid, then ath11k send wmi cmd WMI_REQUEST_STATS_CMDID with flag WMI_REQUEST_RSSI_PER_CHAIN_STAT to firmware, and parse the rssi of chain in wmi WMI_UPDATE_STATS_EVENTID, then report them to mac80211. WMI_REQUEST_STATS_CMDID is only sent when CONFIG_ATH11K_DEBUGFS is set, it is only called by ath11k_mac_op_sta_statistics(). It does not effect performance and power consumption. Because after STATION connected to AP, it is only called every 6 seconds by NetworkManager in below stack. [ 797.005587] CPU: 0 PID: 701 Comm: NetworkManager Tainted: G W OE 5.13.0-rc6-wt-ath+ #2 [ 797.005596] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 797.005600] RIP: 0010:ath11k_mac_op_sta_statistics+0x2f/0x1b0 [ath11k] [ 797.005644] Code: 41 56 41 55 4c 8d aa 58 01 00 00 41 54 55 48 89 d5 53 48 8b 82 58 01 00 00 48 89 cb 4c 8b 70 20 49 8b 06 4c 8b a0 90 08 00 00 <0f> 0b 48 8b 82 b8 01 00 00 48 ba 00 00 00 00 01 00 00 00 48 89 81 [ 797.005651] RSP: 0018:ffffb1fc80a4b890 EFLAGS: 00010282 [ 797.005658] RAX: ffff8a5726200000 RBX: ffffb1fc80a4b958 RCX: ffffb1fc80a4b958 [ 797.005664] RDX: ffff8a5726a609f0 RSI: ffff8a581247f598 RDI: ffff8a5702878800 [ 797.005668] RBP: ffff8a5726a609f0 R08: 0000000000000000 R09: 0000000000000000 [ 797.005672] R10: 0000000000000000 R11: 0000000000000007 R12: 02dd68024f75f480 [ 797.005676] R13: ffff8a5726a60b48 R14: ffff8a5702879f40 R15: ffff8a5726a60000 [ 797.005681] FS: 00007f632c52a380(0000) GS:ffff8a583a200000(0000) knlGS:0000000000000000 [ 797.005687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 797.005692] CR2: 00007fb025d69000 CR3: 00000001124f6005 CR4: 00000000000606f0 [ 797.005698] Call Trace: [ 797.005710] sta_set_sinfo+0xa7/0xb80 [mac80211] [ 797.005820] ieee80211_get_station+0x50/0x70 [mac80211] [ 797.005925] nl80211_get_station+0xd1/0x200 [cfg80211] [ 797.006045] genl_family_rcv_msg_doit.isra.15+0x111/0x140 [ 797.006059] genl_rcv_msg+0xe6/0x1e0 [ 797.006065] ? nl80211_dump_station+0x220/0x220 [cfg80211] [ 797.006223] ? nl80211_send_station.isra.72+0xf50/0xf50 [cfg80211] [ 797.006348] ? genl_family_rcv_msg_doit.isra.15+0x140/0x140 [ 797.006355] netlink_rcv_skb+0xb9/0xf0 [ 797.006363] genl_rcv+0x24/0x40 [ 797.006369] netlink_unicast+0x18e/0x290 [ 797.006375] netlink_sendmsg+0x30f/0x450 [ 797.006382] sock_sendmsg+0x5b/0x60 [ 797.006393] ____sys_sendmsg+0x219/0x240 [ 797.006403] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006413] ? ____sys_recvmsg+0xf5/0x190 [ 797.006422] ___sys_sendmsg+0x88/0xd0 [ 797.006432] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006443] ? ___sys_recvmsg+0x9e/0xd0 [ 797.006454] ? __fget_files+0x58/0x90 [ 797.006461] ? __fget_light+0x2d/0x70 [ 797.006466] ? do_epoll_wait+0xce/0x720 [ 797.006476] ? __sys_sendmsg+0x63/0xa0 [ 797.006485] __sys_sendmsg+0x63/0xa0 [ 797.006497] do_syscall_64+0x3c/0xb0 [ 797.006509] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 797.006519] RIP: 0033:0x7f632d99912d [ 797.006526] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48 [ 797.006533] RSP: 002b:00007ffd80808c00 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 797.006540] RAX: ffffffffffffffda RBX: 0000563dab99d840 RCX: 00007f632d99912d [ 797.006545] RDX: 0000000000000000 RSI: 00007ffd80808c50 RDI: 000000000000000b [ 797.006549] RBP: 00007ffd80808c50 R08: 0000000000000000 R09: 0000000000001000 [ 797.006552] R10: 0000563dab96f010 R11: 0000000000000293 R12: 0000563dab99d840 [ 797.006556] R13: 0000563dabbb28c0 R14: 00007f632dad4280 R15: 0000563dabab11c0 [ 797.006563] ---[ end trace c9dcf08920c9945c ]--- Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211215090944.19729-1-quic_wgong@quicinc.com
2021-12-18 02:27:21 +08:00
.supports_rssi_stats = true,
.fw_wmi_diag_event = true,
.current_cc_support = true,
.dbr_debug_support = false,
.global_reset = true,
.bios_sar_capa = &ath11k_hw_sar_capa_wcn6855,
.m3_fw_support = true,
.fixed_bdf_addr = false,
.fixed_mem_region = false,
.static_window_map = false,
.hybrid_bus_type = false,
.fixed_fw_mem = false,
.support_off_channel_tx = true,
},
{
.name = "wcn6855 hw2.1",
.hw_rev = ATH11K_HW_WCN6855_HW21,
.fw = {
.dir = "WCN6855/hw2.1",
.board_size = 256 * 1024,
.cal_offset = 128 * 1024,
},
.max_radios = 3,
.bdf_addr = 0x4B0C0000,
.hw_ops = &wcn6855_ops,
.ring_mask = &ath11k_hw_ring_mask_qca6390,
.internal_sleep_clock = true,
.regs = &wcn6855_regs,
.qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCA6390,
.host_ce_config = ath11k_host_ce_config_qca6390,
.ce_count = 9,
.target_ce_config = ath11k_target_ce_config_wlan_qca6390,
.target_ce_count = 9,
.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_qca6390,
.svc_to_ce_map_len = 14,
.single_pdev_only = true,
.rxdma1_enable = false,
.num_rxmda_per_pdev = 2,
.rx_mac_buf_ring = true,
.vdev_start_delay = true,
.htt_peer_map_v2 = false,
.spectral = {
.fft_sz = 0,
.fft_pad_sz = 0,
.summary_pad_sz = 0,
.fft_hdr_len = 0,
.max_fft_bins = 0,
},
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP),
.supports_monitor = false,
.supports_shadow_regs = true,
.idle_ps = true,
.supports_sta_ps = true,
.cold_boot_calib = false,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
.supports_suspend = true,
.hal_desc_sz = sizeof(struct hal_rx_desc_wcn6855),
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
.supports_regdb = true,
.fix_l1ss = false,
ath11k: Disabling credit flow for WMI path Firmware credit flow control is enabled for WMI control services, which expects available tokens should be acquired before sending a command to the target. Also the token gets released when firmware receives the command. This credit-based flow limits driver to send WMI command only when the token available which is causing WMI commands to timeout and return -EAGAIN, whereas firmware has enough capability to process the WMI command. To fix this Tx starvation issue, introduce the ability to disable the credit flow for the WMI path. The driver sends WMI configuration for disabling credit flow to firmware by two ways. 1. By using a global flag (HTC_MSG_SETUP_COMPLETE_EX_ID msg type flags) 2. By using a local flag (ATH11K_HTC_CONN_FLAGS_DISABLE_CREDIT_FLOW_CTRL = 1 << 3) Ath11k uses both these configurations to disable credit flow for the WMI path completely. Also added a hw_param member for credit flow control by which we can enable or disable it based on per-target basis. Currently we are disabling credit flow for IPQ8074, IPQ6018, and QCN9074 as recommended by firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1 Co-developed-by: Pravas Kumar Panda <kumarpan@codeaurora.org> Signed-off-by: Pravas Kumar Panda <kumarpan@codeaurora.org> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635156494-20059-1-git-send-email-quic_ppranees@quicinc.com
2021-11-15 17:50:52 +08:00
.credit_flow = true,
.max_tx_ring = DP_TCL_NUM_RING_MAX_QCA6390,
.hal_params = &ath11k_hw_hal_params_qca6390,
.supports_dynamic_smps_6ghz = false,
.alloc_cacheable_memory = false,
ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855 Command "iw wls1 station dump" does not show each chain's rssi currently. If the rssi of each chain from mon status which parsed in function ath11k_hal_rx_parse_mon_status_tlv() is invalid, then ath11k send wmi cmd WMI_REQUEST_STATS_CMDID with flag WMI_REQUEST_RSSI_PER_CHAIN_STAT to firmware, and parse the rssi of chain in wmi WMI_UPDATE_STATS_EVENTID, then report them to mac80211. WMI_REQUEST_STATS_CMDID is only sent when CONFIG_ATH11K_DEBUGFS is set, it is only called by ath11k_mac_op_sta_statistics(). It does not effect performance and power consumption. Because after STATION connected to AP, it is only called every 6 seconds by NetworkManager in below stack. [ 797.005587] CPU: 0 PID: 701 Comm: NetworkManager Tainted: G W OE 5.13.0-rc6-wt-ath+ #2 [ 797.005596] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 797.005600] RIP: 0010:ath11k_mac_op_sta_statistics+0x2f/0x1b0 [ath11k] [ 797.005644] Code: 41 56 41 55 4c 8d aa 58 01 00 00 41 54 55 48 89 d5 53 48 8b 82 58 01 00 00 48 89 cb 4c 8b 70 20 49 8b 06 4c 8b a0 90 08 00 00 <0f> 0b 48 8b 82 b8 01 00 00 48 ba 00 00 00 00 01 00 00 00 48 89 81 [ 797.005651] RSP: 0018:ffffb1fc80a4b890 EFLAGS: 00010282 [ 797.005658] RAX: ffff8a5726200000 RBX: ffffb1fc80a4b958 RCX: ffffb1fc80a4b958 [ 797.005664] RDX: ffff8a5726a609f0 RSI: ffff8a581247f598 RDI: ffff8a5702878800 [ 797.005668] RBP: ffff8a5726a609f0 R08: 0000000000000000 R09: 0000000000000000 [ 797.005672] R10: 0000000000000000 R11: 0000000000000007 R12: 02dd68024f75f480 [ 797.005676] R13: ffff8a5726a60b48 R14: ffff8a5702879f40 R15: ffff8a5726a60000 [ 797.005681] FS: 00007f632c52a380(0000) GS:ffff8a583a200000(0000) knlGS:0000000000000000 [ 797.005687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 797.005692] CR2: 00007fb025d69000 CR3: 00000001124f6005 CR4: 00000000000606f0 [ 797.005698] Call Trace: [ 797.005710] sta_set_sinfo+0xa7/0xb80 [mac80211] [ 797.005820] ieee80211_get_station+0x50/0x70 [mac80211] [ 797.005925] nl80211_get_station+0xd1/0x200 [cfg80211] [ 797.006045] genl_family_rcv_msg_doit.isra.15+0x111/0x140 [ 797.006059] genl_rcv_msg+0xe6/0x1e0 [ 797.006065] ? nl80211_dump_station+0x220/0x220 [cfg80211] [ 797.006223] ? nl80211_send_station.isra.72+0xf50/0xf50 [cfg80211] [ 797.006348] ? genl_family_rcv_msg_doit.isra.15+0x140/0x140 [ 797.006355] netlink_rcv_skb+0xb9/0xf0 [ 797.006363] genl_rcv+0x24/0x40 [ 797.006369] netlink_unicast+0x18e/0x290 [ 797.006375] netlink_sendmsg+0x30f/0x450 [ 797.006382] sock_sendmsg+0x5b/0x60 [ 797.006393] ____sys_sendmsg+0x219/0x240 [ 797.006403] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006413] ? ____sys_recvmsg+0xf5/0x190 [ 797.006422] ___sys_sendmsg+0x88/0xd0 [ 797.006432] ? copy_msghdr_from_user+0x5c/0x90 [ 797.006443] ? ___sys_recvmsg+0x9e/0xd0 [ 797.006454] ? __fget_files+0x58/0x90 [ 797.006461] ? __fget_light+0x2d/0x70 [ 797.006466] ? do_epoll_wait+0xce/0x720 [ 797.006476] ? __sys_sendmsg+0x63/0xa0 [ 797.006485] __sys_sendmsg+0x63/0xa0 [ 797.006497] do_syscall_64+0x3c/0xb0 [ 797.006509] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 797.006519] RIP: 0033:0x7f632d99912d [ 797.006526] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48 [ 797.006533] RSP: 002b:00007ffd80808c00 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 797.006540] RAX: ffffffffffffffda RBX: 0000563dab99d840 RCX: 00007f632d99912d [ 797.006545] RDX: 0000000000000000 RSI: 00007ffd80808c50 RDI: 000000000000000b [ 797.006549] RBP: 00007ffd80808c50 R08: 0000000000000000 R09: 0000000000001000 [ 797.006552] R10: 0000563dab96f010 R11: 0000000000000293 R12: 0000563dab99d840 [ 797.006556] R13: 0000563dabbb28c0 R14: 00007f632dad4280 R15: 0000563dabab11c0 [ 797.006563] ---[ end trace c9dcf08920c9945c ]--- Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211215090944.19729-1-quic_wgong@quicinc.com
2021-12-18 02:27:21 +08:00
.supports_rssi_stats = true,
.fw_wmi_diag_event = true,
.current_cc_support = true,
.dbr_debug_support = false,
.global_reset = true,
.bios_sar_capa = &ath11k_hw_sar_capa_wcn6855,
.m3_fw_support = true,
.fixed_bdf_addr = false,
.fixed_mem_region = false,
.static_window_map = false,
.hybrid_bus_type = false,
.fixed_fw_mem = false,
.support_off_channel_tx = true,
},
{
.name = "wcn6750 hw1.0",
.hw_rev = ATH11K_HW_WCN6750_HW10,
.fw = {
.dir = "WCN6750/hw1.0",
.board_size = 256 * 1024,
.cal_offset = 128 * 1024,
},
.max_radios = 1,
.bdf_addr = 0x4B0C0000,
.hw_ops = &wcn6750_ops,
.ring_mask = &ath11k_hw_ring_mask_qca6390,
.internal_sleep_clock = false,
.regs = &wcn6750_regs,
.qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_WCN6750,
.host_ce_config = ath11k_host_ce_config_qca6390,
.ce_count = 9,
.target_ce_config = ath11k_target_ce_config_wlan_qca6390,
.target_ce_count = 9,
.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_qca6390,
.svc_to_ce_map_len = 14,
.single_pdev_only = true,
.rxdma1_enable = false,
.num_rxmda_per_pdev = 1,
.rx_mac_buf_ring = true,
.vdev_start_delay = true,
.htt_peer_map_v2 = false,
.spectral = {
.fft_sz = 0,
.fft_pad_sz = 0,
.summary_pad_sz = 0,
.fft_hdr_len = 0,
.max_fft_bins = 0,
},
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP),
.supports_monitor = false,
.supports_shadow_regs = true,
.idle_ps = true,
.supports_sta_ps = true,
.cold_boot_calib = false,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
.supports_suspend = false,
.hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074),
.supports_regdb = true,
.fix_l1ss = false,
.credit_flow = true,
.max_tx_ring = DP_TCL_NUM_RING_MAX_QCA6390,
.hal_params = &ath11k_hw_hal_params_qca6390,
.supports_dynamic_smps_6ghz = false,
.alloc_cacheable_memory = false,
.supports_rssi_stats = true,
.fw_wmi_diag_event = false,
.current_cc_support = true,
.dbr_debug_support = false,
.global_reset = false,
.bios_sar_capa = NULL,
.m3_fw_support = false,
.fixed_bdf_addr = false,
.fixed_mem_region = false,
.static_window_map = true,
.hybrid_bus_type = true,
.fixed_fw_mem = true,
.support_off_channel_tx = false,
},
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
};
static inline struct ath11k_pdev *ath11k_core_get_single_pdev(struct ath11k_base *ab)
{
WARN_ON(!ab->hw_params.single_pdev_only);
return &ab->pdevs[0];
}
int ath11k_core_suspend(struct ath11k_base *ab)
{
int ret;
struct ath11k_pdev *pdev;
struct ath11k *ar;
if (!ab->hw_params.supports_suspend)
return -EOPNOTSUPP;
/* so far single_pdev_only chips have supports_suspend as true
* and only the first pdev is valid.
*/
pdev = ath11k_core_get_single_pdev(ab);
ar = pdev->ar;
if (!ar || ar->state != ATH11K_STATE_OFF)
return 0;
ret = ath11k_dp_rx_pktlog_stop(ab, true);
if (ret) {
ath11k_warn(ab, "failed to stop dp rx (and timer) pktlog during suspend: %d\n",
ret);
return ret;
}
ret = ath11k_mac_wait_tx_complete(ar);
if (ret) {
ath11k_warn(ab, "failed to wait tx complete: %d\n", ret);
return ret;
}
ret = ath11k_wow_enable(ab);
if (ret) {
ath11k_warn(ab, "failed to enable wow during suspend: %d\n", ret);
return ret;
}
ret = ath11k_dp_rx_pktlog_stop(ab, false);
if (ret) {
ath11k_warn(ab, "failed to stop dp rx pktlog during suspend: %d\n",
ret);
return ret;
}
ath11k_ce_stop_shadow_timers(ab);
ath11k_dp_stop_shadow_timers(ab);
ath11k_hif_irq_disable(ab);
ath11k_hif_ce_irq_disable(ab);
ret = ath11k_hif_suspend(ab);
if (ret) {
ath11k_warn(ab, "failed to suspend hif: %d\n", ret);
return ret;
}
return 0;
}
EXPORT_SYMBOL(ath11k_core_suspend);
int ath11k_core_resume(struct ath11k_base *ab)
{
int ret;
struct ath11k_pdev *pdev;
struct ath11k *ar;
if (!ab->hw_params.supports_suspend)
return -EOPNOTSUPP;
/* so far signle_pdev_only chips have supports_suspend as true
* and only the first pdev is valid.
*/
pdev = ath11k_core_get_single_pdev(ab);
ar = pdev->ar;
if (!ar || ar->state != ATH11K_STATE_OFF)
return 0;
ret = ath11k_hif_resume(ab);
if (ret) {
ath11k_warn(ab, "failed to resume hif during resume: %d\n", ret);
return ret;
}
ath11k_hif_ce_irq_enable(ab);
ath11k_hif_irq_enable(ab);
ret = ath11k_dp_rx_pktlog_start(ab);
if (ret) {
ath11k_warn(ab, "failed to start rx pktlog during resume: %d\n",
ret);
return ret;
}
ret = ath11k_wow_wakeup(ab);
if (ret) {
ath11k_warn(ab, "failed to wakeup wow during resume: %d\n", ret);
return ret;
}
return 0;
}
EXPORT_SYMBOL(ath11k_core_resume);
static void ath11k_core_check_cc_code_bdfext(const struct dmi_header *hdr, void *data)
{
struct ath11k_base *ab = data;
const char *magic = ATH11K_SMBIOS_BDF_EXT_MAGIC;
struct ath11k_smbios_bdf *smbios = (struct ath11k_smbios_bdf *)hdr;
ssize_t copied;
size_t len;
int i;
if (ab->qmi.target.bdf_ext[0] != '\0')
return;
if (hdr->type != ATH11K_SMBIOS_BDF_EXT_TYPE)
return;
if (hdr->length != ATH11K_SMBIOS_BDF_EXT_LENGTH) {
ath11k_dbg(ab, ATH11K_DBG_BOOT,
"wrong smbios bdf ext type length (%d).\n",
hdr->length);
return;
}
spin_lock_bh(&ab->base_lock);
switch (smbios->country_code_flag) {
case ATH11K_SMBIOS_CC_ISO:
ab->new_alpha2[0] = (smbios->cc_code >> 8) & 0xff;
ab->new_alpha2[1] = smbios->cc_code & 0xff;
ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot smbios cc_code %c%c\n",
ab->new_alpha2[0], ab->new_alpha2[1]);
break;
case ATH11K_SMBIOS_CC_WW:
ab->new_alpha2[0] = '0';
ab->new_alpha2[1] = '0';
ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot smbios worldwide regdomain\n");
break;
default:
ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot ignore smbios country code setting %d\n",
smbios->country_code_flag);
break;
}
spin_unlock_bh(&ab->base_lock);
if (!smbios->bdf_enabled) {
ath11k_dbg(ab, ATH11K_DBG_BOOT, "bdf variant name not found.\n");
return;
}
/* Only one string exists (per spec) */
if (memcmp(smbios->bdf_ext, magic, strlen(magic)) != 0) {
ath11k_dbg(ab, ATH11K_DBG_BOOT,
"bdf variant magic does not match.\n");
return;
}
len = min_t(size_t,
strlen(smbios->bdf_ext), sizeof(ab->qmi.target.bdf_ext));
for (i = 0; i < len; i++) {
if (!isascii(smbios->bdf_ext[i]) || !isprint(smbios->bdf_ext[i])) {
ath11k_dbg(ab, ATH11K_DBG_BOOT,
"bdf variant name contains non ascii chars.\n");
return;
}
}
/* Copy extension name without magic prefix */
copied = strscpy(ab->qmi.target.bdf_ext, smbios->bdf_ext + strlen(magic),
sizeof(ab->qmi.target.bdf_ext));
if (copied < 0) {
ath11k_dbg(ab, ATH11K_DBG_BOOT,
"bdf variant string is longer than the buffer can accommodate\n");
return;
}
ath11k_dbg(ab, ATH11K_DBG_BOOT,
"found and validated bdf variant smbios_type 0x%x bdf %s\n",
ATH11K_SMBIOS_BDF_EXT_TYPE, ab->qmi.target.bdf_ext);
}
int ath11k_core_check_smbios(struct ath11k_base *ab)
{
ab->qmi.target.bdf_ext[0] = '\0';
dmi_walk(ath11k_core_check_cc_code_bdfext, ab);
if (ab->qmi.target.bdf_ext[0] == '\0')
return -ENODATA;
return 0;
}
int ath11k_core_check_dt(struct ath11k_base *ab)
{
size_t max_len = sizeof(ab->qmi.target.bdf_ext);
const char *variant = NULL;
struct device_node *node;
node = ab->dev->of_node;
if (!node)
return -ENOENT;
of_property_read_string(node, "qcom,ath11k-calibration-variant",
&variant);
if (!variant)
return -ENODATA;
if (strscpy(ab->qmi.target.bdf_ext, variant, max_len) < 0)
ath11k_dbg(ab, ATH11K_DBG_BOOT,
"bdf variant string is longer than the buffer can accommodate (variant: %s)\n",
variant);
return 0;
}
ath11k: add fallback board name without variant while searching board-2.bin Sometimes it has a variant value which read from DT or SMBIOS by ath11k, and meanwhile it does not have the matched board name in board-2.bin, then it will failed at boot up phase. Add fallback board name which removed variant value and search again in board-2.bin when failed with variant and try to load the board data again to increase boot up success rate. dmesg log after this patch: [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248568] ath11k_pci 0000:05:00.0: board name [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath11k_pci 0000:05:00.0: board name [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath11k_pci 0000:05:00.0: board name [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248636] ath11k_pci 0000:05:00.0: board name [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220315104721.26649-2-quic_wgong@quicinc.com
2022-03-23 17:14:16 +08:00
static int __ath11k_core_create_board_name(struct ath11k_base *ab, char *name,
size_t name_len, bool with_variant)
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
{
/* strlen(',variant=') + strlen(ab->qmi.target.bdf_ext) */
char variant[9 + ATH11K_QMI_BDF_EXT_STR_LENGTH] = { 0 };
ath11k: add fallback board name without variant while searching board-2.bin Sometimes it has a variant value which read from DT or SMBIOS by ath11k, and meanwhile it does not have the matched board name in board-2.bin, then it will failed at boot up phase. Add fallback board name which removed variant value and search again in board-2.bin when failed with variant and try to load the board data again to increase boot up success rate. dmesg log after this patch: [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248568] ath11k_pci 0000:05:00.0: board name [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath11k_pci 0000:05:00.0: board name [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath11k_pci 0000:05:00.0: board name [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248636] ath11k_pci 0000:05:00.0: board name [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220315104721.26649-2-quic_wgong@quicinc.com
2022-03-23 17:14:16 +08:00
if (with_variant && ab->qmi.target.bdf_ext[0] != '\0')
scnprintf(variant, sizeof(variant), ",variant=%s",
ab->qmi.target.bdf_ext);
switch (ab->id.bdf_search) {
case ATH11K_BDF_SEARCH_BUS_AND_BOARD:
scnprintf(name, name_len,
"bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x,qmi-chip-id=%d,qmi-board-id=%d%s",
ath11k_bus_str(ab->hif.bus),
ab->id.vendor, ab->id.device,
ab->id.subsystem_vendor,
ab->id.subsystem_device,
ab->qmi.target.chip_id,
ab->qmi.target.board_id,
variant);
break;
default:
scnprintf(name, name_len,
"bus=%s,qmi-chip-id=%d,qmi-board-id=%d%s",
ath11k_bus_str(ab->hif.bus),
ab->qmi.target.chip_id,
ab->qmi.target.board_id, variant);
break;
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot using board name '%s'\n", name);
return 0;
}
ath11k: add fallback board name without variant while searching board-2.bin Sometimes it has a variant value which read from DT or SMBIOS by ath11k, and meanwhile it does not have the matched board name in board-2.bin, then it will failed at boot up phase. Add fallback board name which removed variant value and search again in board-2.bin when failed with variant and try to load the board data again to increase boot up success rate. dmesg log after this patch: [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248568] ath11k_pci 0000:05:00.0: board name [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath11k_pci 0000:05:00.0: board name [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath11k_pci 0000:05:00.0: board name [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248636] ath11k_pci 0000:05:00.0: board name [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220315104721.26649-2-quic_wgong@quicinc.com
2022-03-23 17:14:16 +08:00
static int ath11k_core_create_board_name(struct ath11k_base *ab, char *name,
size_t name_len)
{
return __ath11k_core_create_board_name(ab, name, name_len, true);
}
static int ath11k_core_create_fallback_board_name(struct ath11k_base *ab, char *name,
size_t name_len)
{
return __ath11k_core_create_board_name(ab, name, name_len, false);
}
const struct firmware *ath11k_core_firmware_request(struct ath11k_base *ab,
const char *file)
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
{
const struct firmware *fw;
char path[100];
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
int ret;
if (file == NULL)
return ERR_PTR(-ENOENT);
ath11k_core_create_firmware_path(ab, file, path, sizeof(path));
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ret = firmware_request_nowarn(&fw, path, ab->dev);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (ret)
return ERR_PTR(ret);
ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot firmware request %s size %zu\n",
path, fw->size);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
return fw;
}
void ath11k_core_free_bdf(struct ath11k_base *ab, struct ath11k_board_data *bd)
{
if (!IS_ERR(bd->fw))
release_firmware(bd->fw);
memset(bd, 0, sizeof(*bd));
}
static int ath11k_core_parse_bd_ie_board(struct ath11k_base *ab,
struct ath11k_board_data *bd,
const void *buf, size_t buf_len,
const char *boardname,
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
int ie_id,
int name_id,
int data_id)
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
{
const struct ath11k_fw_ie *hdr;
bool name_match_found;
int ret, board_ie_id;
size_t board_ie_len;
const void *board_ie_data;
name_match_found = false;
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
/* go through ATH11K_BD_IE_BOARD_/ATH11K_BD_IE_REGDB_ elements */
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
while (buf_len > sizeof(struct ath11k_fw_ie)) {
hdr = buf;
board_ie_id = le32_to_cpu(hdr->id);
board_ie_len = le32_to_cpu(hdr->len);
board_ie_data = hdr->data;
buf_len -= sizeof(*hdr);
buf += sizeof(*hdr);
if (buf_len < ALIGN(board_ie_len, 4)) {
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
ath11k_err(ab, "invalid %s length: %zu < %zu\n",
ath11k_bd_ie_type_str(ie_id),
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
buf_len, ALIGN(board_ie_len, 4));
ret = -EINVAL;
goto out;
}
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
if (board_ie_id == name_id) {
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ath11k_dbg_dump(ab, ATH11K_DBG_BOOT, "board name", "",
board_ie_data, board_ie_len);
if (board_ie_len != strlen(boardname))
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
goto next;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ret = memcmp(board_ie_data, boardname, strlen(boardname));
if (ret)
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
goto next;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
name_match_found = true;
ath11k_dbg(ab, ATH11K_DBG_BOOT,
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
"boot found match %s for name '%s'",
ath11k_bd_ie_type_str(ie_id),
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
boardname);
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
} else if (board_ie_id == data_id) {
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (!name_match_found)
/* no match found */
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
goto next;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ath11k_dbg(ab, ATH11K_DBG_BOOT,
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
"boot found %s for '%s'",
ath11k_bd_ie_type_str(ie_id),
boardname);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
bd->data = board_ie_data;
bd->len = board_ie_len;
ret = 0;
goto out;
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
} else {
ath11k_warn(ab, "unknown %s id found: %d\n",
ath11k_bd_ie_type_str(ie_id),
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
board_ie_id);
}
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
next:
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
/* jump over the padding */
board_ie_len = ALIGN(board_ie_len, 4);
buf_len -= board_ie_len;
buf += board_ie_len;
}
/* no match found */
ret = -ENOENT;
out:
return ret;
}
static int ath11k_core_fetch_board_data_api_n(struct ath11k_base *ab,
struct ath11k_board_data *bd,
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
const char *boardname,
int ie_id_match,
int name_id,
int data_id)
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
{
size_t len, magic_len;
const u8 *data;
char *filename, filepath[100];
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
size_t ie_len;
struct ath11k_fw_ie *hdr;
int ret, ie_id;
filename = ATH11K_BOARD_API2_FILE;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (!bd->fw)
bd->fw = ath11k_core_firmware_request(ab, filename);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (IS_ERR(bd->fw))
return PTR_ERR(bd->fw);
data = bd->fw->data;
len = bd->fw->size;
ath11k_core_create_firmware_path(ab, filename,
filepath, sizeof(filepath));
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
/* magic has extra null byte padded */
magic_len = strlen(ATH11K_BOARD_MAGIC) + 1;
if (len < magic_len) {
ath11k_err(ab, "failed to find magic value in %s, file too short: %zu\n",
filepath, len);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ret = -EINVAL;
goto err;
}
if (memcmp(data, ATH11K_BOARD_MAGIC, magic_len)) {
ath11k_err(ab, "found invalid board magic\n");
ret = -EINVAL;
goto err;
}
/* magic is padded to 4 bytes */
magic_len = ALIGN(magic_len, 4);
if (len < magic_len) {
ath11k_err(ab, "failed: %s too small to contain board data, len: %zu\n",
filepath, len);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ret = -EINVAL;
goto err;
}
data += magic_len;
len -= magic_len;
while (len > sizeof(struct ath11k_fw_ie)) {
hdr = (struct ath11k_fw_ie *)data;
ie_id = le32_to_cpu(hdr->id);
ie_len = le32_to_cpu(hdr->len);
len -= sizeof(*hdr);
data = hdr->data;
if (len < ALIGN(ie_len, 4)) {
ath11k_err(ab, "invalid length for board ie_id %d ie_len %zu len %zu\n",
ie_id, ie_len, len);
ret = -EINVAL;
goto err;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
}
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
if (ie_id == ie_id_match) {
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ret = ath11k_core_parse_bd_ie_board(ab, bd, data,
ie_len,
boardname,
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
ie_id_match,
name_id,
data_id);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (ret == -ENOENT)
/* no match found, continue */
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
goto next;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
else if (ret)
/* there was an error, bail out */
goto err;
/* either found or error, so stop searching */
goto out;
}
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
next:
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
/* jump over the padding */
ie_len = ALIGN(ie_len, 4);
len -= ie_len;
data += ie_len;
}
out:
if (!bd->data || !bd->len) {
ath11k: add fallback board name without variant while searching board-2.bin Sometimes it has a variant value which read from DT or SMBIOS by ath11k, and meanwhile it does not have the matched board name in board-2.bin, then it will failed at boot up phase. Add fallback board name which removed variant value and search again in board-2.bin when failed with variant and try to load the board data again to increase boot up success rate. dmesg log after this patch: [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248568] ath11k_pci 0000:05:00.0: board name [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath11k_pci 0000:05:00.0: board name [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath11k_pci 0000:05:00.0: board name [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248636] ath11k_pci 0000:05:00.0: board name [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220315104721.26649-2-quic_wgong@quicinc.com
2022-03-23 17:14:16 +08:00
ath11k_dbg(ab, ATH11K_DBG_BOOT,
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
"failed to fetch %s for %s from %s\n",
ath11k_bd_ie_type_str(ie_id_match),
boardname, filepath);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ret = -ENODATA;
goto err;
}
return 0;
err:
ath11k_core_free_bdf(ab, bd);
return ret;
}
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
int ath11k_core_fetch_board_data_api_1(struct ath11k_base *ab,
struct ath11k_board_data *bd,
const char *name)
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
{
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
bd->fw = ath11k_core_firmware_request(ab, name);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (IS_ERR(bd->fw))
return PTR_ERR(bd->fw);
bd->data = bd->fw->data;
bd->len = bd->fw->size;
return 0;
}
#define BOARD_NAME_SIZE 200
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
int ath11k_core_fetch_bdf(struct ath11k_base *ab, struct ath11k_board_data *bd)
{
ath11k: add fallback board name without variant while searching board-2.bin Sometimes it has a variant value which read from DT or SMBIOS by ath11k, and meanwhile it does not have the matched board name in board-2.bin, then it will failed at boot up phase. Add fallback board name which removed variant value and search again in board-2.bin when failed with variant and try to load the board data again to increase boot up success rate. dmesg log after this patch: [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248568] ath11k_pci 0000:05:00.0: board name [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath11k_pci 0000:05:00.0: board name [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath11k_pci 0000:05:00.0: board name [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248636] ath11k_pci 0000:05:00.0: board name [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220315104721.26649-2-quic_wgong@quicinc.com
2022-03-23 17:14:16 +08:00
char boardname[BOARD_NAME_SIZE], fallback_boardname[BOARD_NAME_SIZE];
char *filename, filepath[100];
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
int ret;
ath11k: add fallback board name without variant while searching board-2.bin Sometimes it has a variant value which read from DT or SMBIOS by ath11k, and meanwhile it does not have the matched board name in board-2.bin, then it will failed at boot up phase. Add fallback board name which removed variant value and search again in board-2.bin when failed with variant and try to load the board data again to increase boot up success rate. dmesg log after this patch: [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248568] ath11k_pci 0000:05:00.0: board name [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath11k_pci 0000:05:00.0: board name [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath11k_pci 0000:05:00.0: board name [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248636] ath11k_pci 0000:05:00.0: board name [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220315104721.26649-2-quic_wgong@quicinc.com
2022-03-23 17:14:16 +08:00
filename = ATH11K_BOARD_API2_FILE;
ret = ath11k_core_create_board_name(ab, boardname, sizeof(boardname));
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (ret) {
ath11k_err(ab, "failed to create board name: %d", ret);
return ret;
}
ab->bd_api = 2;
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
ret = ath11k_core_fetch_board_data_api_n(ab, bd, boardname,
ATH11K_BD_IE_BOARD,
ATH11K_BD_IE_BOARD_NAME,
ATH11K_BD_IE_BOARD_DATA);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (!ret)
goto success;
ath11k: add fallback board name without variant while searching board-2.bin Sometimes it has a variant value which read from DT or SMBIOS by ath11k, and meanwhile it does not have the matched board name in board-2.bin, then it will failed at boot up phase. Add fallback board name which removed variant value and search again in board-2.bin when failed with variant and try to load the board data again to increase boot up success rate. dmesg log after this patch: [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248568] ath11k_pci 0000:05:00.0: board name [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath11k_pci 0000:05:00.0: board name [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath11k_pci 0000:05:00.0: board name [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248636] ath11k_pci 0000:05:00.0: board name [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220315104721.26649-2-quic_wgong@quicinc.com
2022-03-23 17:14:16 +08:00
ret = ath11k_core_create_fallback_board_name(ab, fallback_boardname,
sizeof(fallback_boardname));
if (ret) {
ath11k_err(ab, "failed to create fallback board name: %d", ret);
return ret;
}
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
ret = ath11k_core_fetch_board_data_api_n(ab, bd, fallback_boardname,
ATH11K_BD_IE_BOARD,
ATH11K_BD_IE_BOARD_NAME,
ATH11K_BD_IE_BOARD_DATA);
ath11k: add fallback board name without variant while searching board-2.bin Sometimes it has a variant value which read from DT or SMBIOS by ath11k, and meanwhile it does not have the matched board name in board-2.bin, then it will failed at boot up phase. Add fallback board name which removed variant value and search again in board-2.bin when failed with variant and try to load the board data again to increase boot up success rate. dmesg log after this patch: [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248568] ath11k_pci 0000:05:00.0: board name [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath11k_pci 0000:05:00.0: board name [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath11k_pci 0000:05:00.0: board name [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248636] ath11k_pci 0000:05:00.0: board name [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220315104721.26649-2-quic_wgong@quicinc.com
2022-03-23 17:14:16 +08:00
if (!ret)
goto success;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ab->bd_api = 1;
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
ret = ath11k_core_fetch_board_data_api_1(ab, bd, ATH11K_DEFAULT_BOARD_FILE);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (ret) {
ath11k: add fallback board name without variant while searching board-2.bin Sometimes it has a variant value which read from DT or SMBIOS by ath11k, and meanwhile it does not have the matched board name in board-2.bin, then it will failed at boot up phase. Add fallback board name which removed variant value and search again in board-2.bin when failed with variant and try to load the board data again to increase boot up success rate. dmesg log after this patch: [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248568] ath11k_pci 0000:05:00.0: board name [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath11k_pci 0000:05:00.0: board name [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath11k_pci 0000:05:00.0: board name [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248636] ath11k_pci 0000:05:00.0: board name [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220315104721.26649-2-quic_wgong@quicinc.com
2022-03-23 17:14:16 +08:00
ath11k_core_create_firmware_path(ab, filename,
filepath, sizeof(filepath));
ath11k_err(ab, "failed to fetch board data for %s from %s\n",
boardname, filepath);
if (memcmp(boardname, fallback_boardname, strlen(boardname)))
ath11k_err(ab, "failed to fetch board data for %s from %s\n",
fallback_boardname, filepath);
ath11k_err(ab, "failed to fetch board.bin from %s\n",
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ab->hw_params.fw.dir);
return ret;
}
success:
ath11k_dbg(ab, ATH11K_DBG_BOOT, "using board api %d\n", ab->bd_api);
return 0;
}
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
int ath11k_core_fetch_regdb(struct ath11k_base *ab, struct ath11k_board_data *bd)
{
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
char boardname[BOARD_NAME_SIZE];
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
int ret;
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
ret = ath11k_core_create_board_name(ab, boardname, BOARD_NAME_SIZE);
if (ret) {
ath11k_dbg(ab, ATH11K_DBG_BOOT,
"failed to create board name for regdb: %d", ret);
goto exit;
}
ret = ath11k_core_fetch_board_data_api_n(ab, bd, boardname,
ATH11K_BD_IE_REGDB,
ATH11K_BD_IE_REGDB_NAME,
ATH11K_BD_IE_REGDB_DATA);
if (!ret)
goto exit;
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
ret = ath11k_core_fetch_board_data_api_1(ab, bd, ATH11K_REGDB_FILE_NAME);
if (ret)
ath11k_dbg(ab, ATH11K_DBG_BOOT, "failed to fetch %s from %s\n",
ATH11K_REGDB_FILE_NAME, ab->hw_params.fw.dir);
ath11k: add support to search regdb data in board-2.bin for WCN6855 Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220319023543.14288-4-quic_wgong@quicinc.com
2022-03-28 19:57:19 +08:00
exit:
if (!ret)
ath11k_dbg(ab, ATH11K_DBG_BOOT, "fetched regdb\n");
ath11k: add regdb.bin download for regdb offload The regdomain is self-managed type for ath11k, the regdomain info is reported from firmware, it is not from wireless regdb. Firmware fetch the regdomain info from board data file before. Currently most of the regdomain info has moved to another file regdb.bin from board data file for some chips such as QCA6390 and WCN6855, so the regdomain info left in board data file is not enough to support the feature which need more regdomain info. After download regdb.bin, firmware will fetch the regdomain info from regdb.bin instead of board data file and report to ath11k. If it does not have the file regdb.bin, it also can initialize wlan success and firmware then fetch regdomain info from board data file. Add download the regdb.bin before download board data for some specific chip which support supports_regdb in hardware parameters. download regdb.bin log: [430082.334162] ath11k_pci 0000:05:00.0: chip_id 0x2 chip_family 0xb board_id 0x106 soc_id 0x400c0200 [430082.334169] ath11k_pci 0000:05:00.0: fw_version 0x110c8b4c fw_build_timestamp 2021-10-25 07:41 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02892-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 [430082.334414] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/regdb.bin size 24310 output of "iw reg get" global country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS (5735 - 5835 @ 80), (N/A, 30), (N/A) (57240 - 63720 @ 2160), (N/A, 40), (N/A) phy#0 (self-managed) country US: DFS-FCC (2402 - 2472 @ 40), (6, 30), (N/A) (5170 - 5250 @ 80), (N/A, 24), (N/A), AUTO-BW (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW (5490 - 5730 @ 160), (N/A, 24), (0 ms), DFS, AUTO-BW (5735 - 5895 @ 160), (N/A, 30), (N/A), AUTO-BW (5945 - 7125 @ 160), (N/A, 24), (N/A), NO-OUTDOOR, AUTO-BW Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220062355.17021-1-quic_wgong@quicinc.com
2021-12-20 14:23:55 +08:00
return ret;
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
static void ath11k_core_stop(struct ath11k_base *ab)
{
if (!test_bit(ATH11K_FLAG_CRASH_FLUSH, &ab->dev_flags))
ath11k_qmi_firmware_stop(ab);
ath11k_hif_stop(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ath11k_wmi_detach(ab);
ath11k_dp_pdev_reo_cleanup(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
/* De-Init of components as needed */
}
static int ath11k_core_soc_create(struct ath11k_base *ab)
{
int ret;
ret = ath11k_qmi_init_service(ab);
if (ret) {
ath11k_err(ab, "failed to initialize qmi :%d\n", ret);
return ret;
}
ret = ath11k_debugfs_soc_create(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (ret) {
ath11k_err(ab, "failed to create ath11k debugfs\n");
goto err_qmi_deinit;
}
ret = ath11k_hif_power_up(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (ret) {
ath11k_err(ab, "failed to power up :%d\n", ret);
goto err_debugfs_reg;
}
return 0;
err_debugfs_reg:
ath11k_debugfs_soc_destroy(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
err_qmi_deinit:
ath11k_qmi_deinit_service(ab);
return ret;
}
static void ath11k_core_soc_destroy(struct ath11k_base *ab)
{
ath11k_debugfs_soc_destroy(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ath11k_dp_free(ab);
ath11k_reg_free(ab);
ath11k_qmi_deinit_service(ab);
}
static int ath11k_core_pdev_create(struct ath11k_base *ab)
{
int ret;
ret = ath11k_debugfs_pdev_create(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (ret) {
ath11k_err(ab, "failed to create core pdev debugfs: %d\n", ret);
return ret;
}
ath11k: fix netdev open race Make sure to allocate resources needed before registering the device. This specifically avoids having a racing open() trigger a BUG_ON() in mod_timer() when ath11k_mac_op_start() is called before the mon_reap_timer as been set up. I did not see this issue with next-20220310, but I hit it on every probe with next-20220511. Perhaps some timing changed in between. Here's the backtrace: [ 51.346947] kernel BUG at kernel/time/timer.c:990! [ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 51.578225] Call trace: [ 51.583293] __mod_timer+0x298/0x390 [ 51.589518] mod_timer+0x14/0x20 [ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k] [ 51.603165] drv_start+0x38/0x60 [mac80211] [ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211] [ 51.617945] ieee80211_open+0x60/0xb0 [mac80211] [ 51.625311] __dev_open+0x100/0x1c0 [ 51.631420] __dev_change_flags+0x194/0x210 [ 51.638214] dev_change_flags+0x24/0x70 [ 51.644646] do_setlink+0x228/0xdb0 [ 51.650723] __rtnl_newlink+0x460/0x830 [ 51.657162] rtnl_newlink+0x4c/0x80 [ 51.663229] rtnetlink_rcv_msg+0x124/0x390 [ 51.669917] netlink_rcv_skb+0x58/0x130 [ 51.676314] rtnetlink_rcv+0x18/0x30 [ 51.682460] netlink_unicast+0x250/0x310 [ 51.688960] netlink_sendmsg+0x19c/0x3e0 [ 51.695458] ____sys_sendmsg+0x220/0x290 [ 51.701938] ___sys_sendmsg+0x7c/0xc0 [ 51.708148] __sys_sendmsg+0x68/0xd0 [ 51.714254] __arm64_sys_sendmsg+0x28/0x40 [ 51.720900] invoke_syscall+0x48/0x120 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 840c36fa727a ("ath11k: dp: stop rx pktlog before suspend") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517103436.15867-1-johan+linaro@kernel.org
2022-05-22 20:33:16 +08:00
ret = ath11k_dp_pdev_alloc(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (ret) {
ath11k: fix netdev open race Make sure to allocate resources needed before registering the device. This specifically avoids having a racing open() trigger a BUG_ON() in mod_timer() when ath11k_mac_op_start() is called before the mon_reap_timer as been set up. I did not see this issue with next-20220310, but I hit it on every probe with next-20220511. Perhaps some timing changed in between. Here's the backtrace: [ 51.346947] kernel BUG at kernel/time/timer.c:990! [ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 51.578225] Call trace: [ 51.583293] __mod_timer+0x298/0x390 [ 51.589518] mod_timer+0x14/0x20 [ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k] [ 51.603165] drv_start+0x38/0x60 [mac80211] [ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211] [ 51.617945] ieee80211_open+0x60/0xb0 [mac80211] [ 51.625311] __dev_open+0x100/0x1c0 [ 51.631420] __dev_change_flags+0x194/0x210 [ 51.638214] dev_change_flags+0x24/0x70 [ 51.644646] do_setlink+0x228/0xdb0 [ 51.650723] __rtnl_newlink+0x460/0x830 [ 51.657162] rtnl_newlink+0x4c/0x80 [ 51.663229] rtnetlink_rcv_msg+0x124/0x390 [ 51.669917] netlink_rcv_skb+0x58/0x130 [ 51.676314] rtnetlink_rcv+0x18/0x30 [ 51.682460] netlink_unicast+0x250/0x310 [ 51.688960] netlink_sendmsg+0x19c/0x3e0 [ 51.695458] ____sys_sendmsg+0x220/0x290 [ 51.701938] ___sys_sendmsg+0x7c/0xc0 [ 51.708148] __sys_sendmsg+0x68/0xd0 [ 51.714254] __arm64_sys_sendmsg+0x28/0x40 [ 51.720900] invoke_syscall+0x48/0x120 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 840c36fa727a ("ath11k: dp: stop rx pktlog before suspend") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517103436.15867-1-johan+linaro@kernel.org
2022-05-22 20:33:16 +08:00
ath11k_err(ab, "failed to attach DP pdev: %d\n", ret);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
goto err_pdev_debug;
}
ath11k: fix netdev open race Make sure to allocate resources needed before registering the device. This specifically avoids having a racing open() trigger a BUG_ON() in mod_timer() when ath11k_mac_op_start() is called before the mon_reap_timer as been set up. I did not see this issue with next-20220310, but I hit it on every probe with next-20220511. Perhaps some timing changed in between. Here's the backtrace: [ 51.346947] kernel BUG at kernel/time/timer.c:990! [ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 51.578225] Call trace: [ 51.583293] __mod_timer+0x298/0x390 [ 51.589518] mod_timer+0x14/0x20 [ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k] [ 51.603165] drv_start+0x38/0x60 [mac80211] [ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211] [ 51.617945] ieee80211_open+0x60/0xb0 [mac80211] [ 51.625311] __dev_open+0x100/0x1c0 [ 51.631420] __dev_change_flags+0x194/0x210 [ 51.638214] dev_change_flags+0x24/0x70 [ 51.644646] do_setlink+0x228/0xdb0 [ 51.650723] __rtnl_newlink+0x460/0x830 [ 51.657162] rtnl_newlink+0x4c/0x80 [ 51.663229] rtnetlink_rcv_msg+0x124/0x390 [ 51.669917] netlink_rcv_skb+0x58/0x130 [ 51.676314] rtnetlink_rcv+0x18/0x30 [ 51.682460] netlink_unicast+0x250/0x310 [ 51.688960] netlink_sendmsg+0x19c/0x3e0 [ 51.695458] ____sys_sendmsg+0x220/0x290 [ 51.701938] ___sys_sendmsg+0x7c/0xc0 [ 51.708148] __sys_sendmsg+0x68/0xd0 [ 51.714254] __arm64_sys_sendmsg+0x28/0x40 [ 51.720900] invoke_syscall+0x48/0x120 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 840c36fa727a ("ath11k: dp: stop rx pktlog before suspend") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517103436.15867-1-johan+linaro@kernel.org
2022-05-22 20:33:16 +08:00
ret = ath11k_mac_register(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (ret) {
ath11k: fix netdev open race Make sure to allocate resources needed before registering the device. This specifically avoids having a racing open() trigger a BUG_ON() in mod_timer() when ath11k_mac_op_start() is called before the mon_reap_timer as been set up. I did not see this issue with next-20220310, but I hit it on every probe with next-20220511. Perhaps some timing changed in between. Here's the backtrace: [ 51.346947] kernel BUG at kernel/time/timer.c:990! [ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 51.578225] Call trace: [ 51.583293] __mod_timer+0x298/0x390 [ 51.589518] mod_timer+0x14/0x20 [ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k] [ 51.603165] drv_start+0x38/0x60 [mac80211] [ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211] [ 51.617945] ieee80211_open+0x60/0xb0 [mac80211] [ 51.625311] __dev_open+0x100/0x1c0 [ 51.631420] __dev_change_flags+0x194/0x210 [ 51.638214] dev_change_flags+0x24/0x70 [ 51.644646] do_setlink+0x228/0xdb0 [ 51.650723] __rtnl_newlink+0x460/0x830 [ 51.657162] rtnl_newlink+0x4c/0x80 [ 51.663229] rtnetlink_rcv_msg+0x124/0x390 [ 51.669917] netlink_rcv_skb+0x58/0x130 [ 51.676314] rtnetlink_rcv+0x18/0x30 [ 51.682460] netlink_unicast+0x250/0x310 [ 51.688960] netlink_sendmsg+0x19c/0x3e0 [ 51.695458] ____sys_sendmsg+0x220/0x290 [ 51.701938] ___sys_sendmsg+0x7c/0xc0 [ 51.708148] __sys_sendmsg+0x68/0xd0 [ 51.714254] __arm64_sys_sendmsg+0x28/0x40 [ 51.720900] invoke_syscall+0x48/0x120 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 840c36fa727a ("ath11k: dp: stop rx pktlog before suspend") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517103436.15867-1-johan+linaro@kernel.org
2022-05-22 20:33:16 +08:00
ath11k_err(ab, "failed register the radio with mac80211: %d\n", ret);
goto err_dp_pdev_free;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
}
ret = ath11k_thermal_register(ab);
if (ret) {
ath11k_err(ab, "could not register thermal device: %d\n",
ret);
ath11k: fix netdev open race Make sure to allocate resources needed before registering the device. This specifically avoids having a racing open() trigger a BUG_ON() in mod_timer() when ath11k_mac_op_start() is called before the mon_reap_timer as been set up. I did not see this issue with next-20220310, but I hit it on every probe with next-20220511. Perhaps some timing changed in between. Here's the backtrace: [ 51.346947] kernel BUG at kernel/time/timer.c:990! [ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 51.578225] Call trace: [ 51.583293] __mod_timer+0x298/0x390 [ 51.589518] mod_timer+0x14/0x20 [ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k] [ 51.603165] drv_start+0x38/0x60 [mac80211] [ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211] [ 51.617945] ieee80211_open+0x60/0xb0 [mac80211] [ 51.625311] __dev_open+0x100/0x1c0 [ 51.631420] __dev_change_flags+0x194/0x210 [ 51.638214] dev_change_flags+0x24/0x70 [ 51.644646] do_setlink+0x228/0xdb0 [ 51.650723] __rtnl_newlink+0x460/0x830 [ 51.657162] rtnl_newlink+0x4c/0x80 [ 51.663229] rtnetlink_rcv_msg+0x124/0x390 [ 51.669917] netlink_rcv_skb+0x58/0x130 [ 51.676314] rtnetlink_rcv+0x18/0x30 [ 51.682460] netlink_unicast+0x250/0x310 [ 51.688960] netlink_sendmsg+0x19c/0x3e0 [ 51.695458] ____sys_sendmsg+0x220/0x290 [ 51.701938] ___sys_sendmsg+0x7c/0xc0 [ 51.708148] __sys_sendmsg+0x68/0xd0 [ 51.714254] __arm64_sys_sendmsg+0x28/0x40 [ 51.720900] invoke_syscall+0x48/0x120 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 840c36fa727a ("ath11k: dp: stop rx pktlog before suspend") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517103436.15867-1-johan+linaro@kernel.org
2022-05-22 20:33:16 +08:00
goto err_mac_unregister;
}
ret = ath11k_spectral_init(ab);
if (ret) {
ath11k_err(ab, "failed to init spectral %d\n", ret);
goto err_thermal_unregister;
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
return 0;
err_thermal_unregister:
ath11k_thermal_unregister(ab);
err_mac_unregister:
ath11k_mac_unregister(ab);
ath11k: fix netdev open race Make sure to allocate resources needed before registering the device. This specifically avoids having a racing open() trigger a BUG_ON() in mod_timer() when ath11k_mac_op_start() is called before the mon_reap_timer as been set up. I did not see this issue with next-20220310, but I hit it on every probe with next-20220511. Perhaps some timing changed in between. Here's the backtrace: [ 51.346947] kernel BUG at kernel/time/timer.c:990! [ 51.346958] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 51.578225] Call trace: [ 51.583293] __mod_timer+0x298/0x390 [ 51.589518] mod_timer+0x14/0x20 [ 51.595368] ath11k_mac_op_start+0x41c/0x4a0 [ath11k] [ 51.603165] drv_start+0x38/0x60 [mac80211] [ 51.610110] ieee80211_do_open+0x29c/0x7d0 [mac80211] [ 51.617945] ieee80211_open+0x60/0xb0 [mac80211] [ 51.625311] __dev_open+0x100/0x1c0 [ 51.631420] __dev_change_flags+0x194/0x210 [ 51.638214] dev_change_flags+0x24/0x70 [ 51.644646] do_setlink+0x228/0xdb0 [ 51.650723] __rtnl_newlink+0x460/0x830 [ 51.657162] rtnl_newlink+0x4c/0x80 [ 51.663229] rtnetlink_rcv_msg+0x124/0x390 [ 51.669917] netlink_rcv_skb+0x58/0x130 [ 51.676314] rtnetlink_rcv+0x18/0x30 [ 51.682460] netlink_unicast+0x250/0x310 [ 51.688960] netlink_sendmsg+0x19c/0x3e0 [ 51.695458] ____sys_sendmsg+0x220/0x290 [ 51.701938] ___sys_sendmsg+0x7c/0xc0 [ 51.708148] __sys_sendmsg+0x68/0xd0 [ 51.714254] __arm64_sys_sendmsg+0x28/0x40 [ 51.720900] invoke_syscall+0x48/0x120 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 840c36fa727a ("ath11k: dp: stop rx pktlog before suspend") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517103436.15867-1-johan+linaro@kernel.org
2022-05-22 20:33:16 +08:00
err_dp_pdev_free:
ath11k_dp_pdev_free(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
err_pdev_debug:
ath11k_debugfs_pdev_destroy(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
return ret;
}
static void ath11k_core_pdev_destroy(struct ath11k_base *ab)
{
ath11k_spectral_deinit(ab);
ath11k_thermal_unregister(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ath11k_mac_unregister(ab);
ath11k_hif_irq_disable(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ath11k_dp_pdev_free(ab);
ath11k_debugfs_pdev_destroy(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
}
static int ath11k_core_start(struct ath11k_base *ab)
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
{
int ret;
ret = ath11k_wmi_attach(ab);
if (ret) {
ath11k_err(ab, "failed to attach wmi: %d\n", ret);
return ret;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
}
ret = ath11k_htc_init(ab);
if (ret) {
ath11k_err(ab, "failed to init htc: %d\n", ret);
goto err_wmi_detach;
}
ret = ath11k_hif_start(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (ret) {
ath11k_err(ab, "failed to start HIF: %d\n", ret);
goto err_wmi_detach;
}
ret = ath11k_htc_wait_target(&ab->htc);
if (ret) {
ath11k_err(ab, "failed to connect to HTC: %d\n", ret);
goto err_hif_stop;
}
ret = ath11k_dp_htt_connect(&ab->dp);
if (ret) {
ath11k_err(ab, "failed to connect to HTT: %d\n", ret);
goto err_hif_stop;
}
ret = ath11k_wmi_connect(ab);
if (ret) {
ath11k_err(ab, "failed to connect wmi: %d\n", ret);
goto err_hif_stop;
}
ret = ath11k_htc_start(&ab->htc);
if (ret) {
ath11k_err(ab, "failed to start HTC: %d\n", ret);
goto err_hif_stop;
}
ret = ath11k_wmi_wait_for_service_ready(ab);
if (ret) {
ath11k_err(ab, "failed to receive wmi service ready event: %d\n",
ret);
goto err_hif_stop;
}
ret = ath11k_mac_allocate(ab);
if (ret) {
ath11k_err(ab, "failed to create new hw device with mac80211 :%d\n",
ret);
goto err_hif_stop;
}
ath11k_dp_pdev_pre_alloc(ab);
ret = ath11k_dp_pdev_reo_setup(ab);
if (ret) {
ath11k_err(ab, "failed to initialize reo destination rings: %d\n", ret);
goto err_mac_destroy;
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ret = ath11k_wmi_cmd_init(ab);
if (ret) {
ath11k_err(ab, "failed to send wmi init cmd: %d\n", ret);
goto err_reo_cleanup;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
}
ret = ath11k_wmi_wait_for_unified_ready(ab);
if (ret) {
ath11k_err(ab, "failed to receive wmi unified ready event: %d\n",
ret);
goto err_reo_cleanup;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
}
/* put hardware to DBS mode */
if (ab->hw_params.single_pdev_only && ab->hw_params.num_rxmda_per_pdev > 1) {
ret = ath11k_wmi_set_hw_mode(ab, WMI_HOST_HW_MODE_DBS);
if (ret) {
ath11k_err(ab, "failed to send dbs mode: %d\n", ret);
goto err_hif_stop;
}
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ret = ath11k_dp_tx_htt_h2t_ver_req_msg(ab);
if (ret) {
ath11k_err(ab, "failed to send htt version request message: %d\n",
ret);
goto err_reo_cleanup;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
}
return 0;
err_reo_cleanup:
ath11k_dp_pdev_reo_cleanup(ab);
err_mac_destroy:
ath11k_mac_destroy(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
err_hif_stop:
ath11k_hif_stop(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
err_wmi_detach:
ath11k_wmi_detach(ab);
return ret;
}
static int ath11k_core_start_firmware(struct ath11k_base *ab,
enum ath11k_firmware_mode mode)
{
int ret;
ath11k_ce_get_shadow_config(ab, &ab->qmi.ce_cfg.shadow_reg_v2,
&ab->qmi.ce_cfg.shadow_reg_v2_len);
ret = ath11k_qmi_firmware_start(ab, mode);
if (ret) {
ath11k_err(ab, "failed to send firmware start: %d\n", ret);
return ret;
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
return ret;
}
int ath11k_core_qmi_firmware_ready(struct ath11k_base *ab)
{
int ret;
ret = ath11k_core_start_firmware(ab, ATH11K_FIRMWARE_MODE_NORMAL);
if (ret) {
ath11k_err(ab, "failed to start firmware: %d\n", ret);
return ret;
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ret = ath11k_ce_init_pipes(ab);
if (ret) {
ath11k_err(ab, "failed to initialize CE: %d\n", ret);
goto err_firmware_stop;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
}
ret = ath11k_dp_alloc(ab);
if (ret) {
ath11k_err(ab, "failed to init DP: %d\n", ret);
goto err_firmware_stop;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
}
switch (ath11k_crypto_mode) {
case ATH11K_CRYPT_MODE_SW:
set_bit(ATH11K_FLAG_HW_CRYPTO_DISABLED, &ab->dev_flags);
set_bit(ATH11K_FLAG_RAW_MODE, &ab->dev_flags);
break;
case ATH11K_CRYPT_MODE_HW:
clear_bit(ATH11K_FLAG_HW_CRYPTO_DISABLED, &ab->dev_flags);
clear_bit(ATH11K_FLAG_RAW_MODE, &ab->dev_flags);
break;
default:
ath11k_info(ab, "invalid crypto_mode: %d\n", ath11k_crypto_mode);
return -EINVAL;
}
if (ath11k_frame_mode == ATH11K_HW_TXRX_RAW)
set_bit(ATH11K_FLAG_RAW_MODE, &ab->dev_flags);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
mutex_lock(&ab->core_lock);
ret = ath11k_core_start(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (ret) {
ath11k_err(ab, "failed to start core: %d\n", ret);
goto err_dp_free;
}
ret = ath11k_core_pdev_create(ab);
if (ret) {
ath11k_err(ab, "failed to create pdev core: %d\n", ret);
goto err_core_stop;
}
ath11k_hif_irq_enable(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
mutex_unlock(&ab->core_lock);
return 0;
err_core_stop:
ath11k_core_stop(ab);
ath11k_mac_destroy(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
err_dp_free:
ath11k_dp_free(ab);
mutex_unlock(&ab->core_lock);
err_firmware_stop:
ath11k_qmi_firmware_stop(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
return ret;
}
static int ath11k_core_reconfigure_on_crash(struct ath11k_base *ab)
{
int ret;
mutex_lock(&ab->core_lock);
ath11k_thermal_unregister(ab);
ath11k_hif_irq_disable(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ath11k_dp_pdev_free(ab);
ath11k_spectral_deinit(ab);
ath11k_hif_stop(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ath11k_wmi_detach(ab);
ath11k_dp_pdev_reo_cleanup(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
mutex_unlock(&ab->core_lock);
ath11k_dp_free(ab);
ath11k_hal_srng_deinit(ab);
ab->free_vdev_map = (1LL << (ab->num_radios * TARGET_NUM_VDEVS(ab))) - 1;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ret = ath11k_hal_srng_init(ab);
if (ret)
return ret;
clear_bit(ATH11K_FLAG_CRASH_FLUSH, &ab->dev_flags);
ret = ath11k_core_qmi_firmware_ready(ab);
if (ret)
goto err_hal_srng_deinit;
clear_bit(ATH11K_FLAG_RECOVERY, &ab->dev_flags);
return 0;
err_hal_srng_deinit:
ath11k_hal_srng_deinit(ab);
return ret;
}
void ath11k_core_halt(struct ath11k *ar)
{
struct ath11k_base *ab = ar->ab;
lockdep_assert_held(&ar->conf_mutex);
ar->num_created_vdevs = 0;
ath11k: fix warn-on in disassociation In multi AP VAP scenario, when user bring down the interfaces. mac80211 mark the interface down for the duplicated VAP and removed from the local->interfaces list. ath11k_mac_get_arvif() is dependent on ieee80211_iterate_active_interfaces_atomic() API to find the vdev id in a given radio. In disassociation path, ath11k_mac_get_arvif() not able to find the given vdev id since that VAP is removed from the local->interfaces list. since sta_state callback throws error, mac80211 log the below WARN_ON_ONCE message. Fixed it by storing the allocated_vdev_map in each radio structure to maintain the created vdev id bits. so that we can directly mask this against the given vdev_id to find out the ar from the vdev_id. WARN LOG: WARNING: at net/mac80211/sta_info.c:1008 CPU: 2 PID: 2135 Comm: hostapd Not tainted #1 Hardware name: Qualcomm Technologies, Inc. IPQ807x/AP-HK01-C1 (DT) task: ffffffc03a43d800 ti: ffffffc03a43d800 task.ti: ffffffc03a43d800 PC is at sta_set_sinfo+0x9dc/0xad4 [mac80211] LR is at sta_set_sinfo+0x9cc/0xad4 [mac80211] pc : [<ffffffbffce2a008>] lr : [<ffffffbffce29ff8>] pstate: 20000145 sp : ffffffc02cedb5f0 x29: ffffffc02cedb5f0 x28: ffffffc03a43d800 x27: 0000000000000014 x26: 0000000000000001 x25: ffffffc02cfc4000 x24: ffffffc036905508 x23: 0000000000000012 x22: ffffffc02cedb670 x21: ffffffc03bc64880 x20: ffffffc036904f80 x19: ffffffc02ae31000 x18: 00000000b019f3a1 x17: 0000000057f30331 x16: 00000000d8d1998e x15: 0000000000000066 x14: 393a35383a36343a x13: 6337203a6e6f6974 x12: 6174732065746169 x11: 636f737361736964 x10: 206f742064656c69 x9 : 6146203a31696669 x8 : 6337203a6e6f6974 x7 : 6174732065746169 x6 : ffffffc0008c33f6 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 00000000ffffff92 x1 : 0000000000000000 x0 : ffffffbffcea1091 ---[ end trace 63c4b1c527345d5a ]--- Call trace: [<ffffffbffce2a008>] sta_set_sinfo+0x9dc/0xad4 [mac80211] [<ffffffbffce2a2c4>] __sta_info_flush+0xec/0x130 [mac80211] [<ffffffbffce3dc48>] ieee80211_nan_func_match+0x1a34/0x23e4 [mac80211] [<ffffffbffcde03e0>] __cfg80211_stop_ap+0x60/0xf0 [cfg80211] [<ffffffbffcdb6d08>] __cfg80211_leave+0x110/0x150 [cfg80211] [<ffffffbffcdb6d78>] cfg80211_leave+0x30/0x48 [cfg80211] [<ffffffbffcdb6fbc>] cfg80211_init_wdev+0x22c/0x808 [cfg80211] [<ffffffc0000afe28>] notifier_call_chain+0x50/0x84 [<ffffffc0000afefc>] raw_notifier_call_chain+0x14/0x1c [<ffffffc0004ae94c>] call_netdevice_notifiers_info+0x5c/0x6c [<ffffffc0004ae96c>] call_netdevice_notifiers+0x10/0x18 [<ffffffc0004aea80>] __dev_close_many+0x54/0xc0 [<ffffffc0004aeb50>] dev_close_many+0x64/0xdc [<ffffffc0004b0b70>] rollback_registered_many+0x138/0x2f4 [<ffffffc0004b0d4c>] rollback_registered+0x20/0x34 [<ffffffc0004b34b4>] unregister_netdevice_queue+0x68/0xa8 [<ffffffbffce3870c>] ieee80211_if_remove+0x84/0xc0 [mac80211] [<ffffffbffce3e588>] ieee80211_nan_func_match+0x2374/0x23e4 [mac80211] [<ffffffbffcdc29e8>] cfg80211_wext_giwscan+0x1000/0x1140 [cfg80211] [<ffffffbffcb2a87c>] backport_genlmsg_multicast_allns+0x158/0x1b4 [compat] [<ffffffc0004e0944>] genl_family_rcv_msg+0x258/0x2c0 [<ffffffc0004e09f4>] genl_rcv_msg+0x48/0x6c [<ffffffc0004dfb50>] netlink_rcv_skb+0x5c/0xc4 [<ffffffc0004e06d8>] genl_rcv+0x34/0x48 [<ffffffc0004df570>] netlink_unicast+0x12c/0x1e0 [<ffffffc0004df9a4>] netlink_sendmsg+0x2bc/0x2dc [<ffffffc00049a540>] sock_sendmsg+0x18/0x2c [<ffffffc00049ab94>] ___sys_sendmsg+0x1bc/0x248 [<ffffffc00049ba24>] __sys_sendmsg+0x40/0x68 [<ffffffc00049ba5c>] SyS_sendmsg+0x10/0x20 [<ffffffc000085db0>] el0_svc_naked+0x24/0x28 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-05 09:23:48 +08:00
ar->allocated_vdev_map = 0;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ath11k_mac_scan_finish(ar);
ath11k_mac_peer_cleanup_all(ar);
cancel_delayed_work_sync(&ar->scan.timeout);
cancel_work_sync(&ar->regd_update_work);
cancel_work_sync(&ab->update_11d_work);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
rcu_assign_pointer(ab->pdevs_active[ar->pdev_idx], NULL);
synchronize_rcu();
INIT_LIST_HEAD(&ar->arvifs);
idr_init(&ar->txmgmt_idr);
}
static void ath11k_update_11d(struct work_struct *work)
{
struct ath11k_base *ab = container_of(work, struct ath11k_base, update_11d_work);
struct ath11k *ar;
struct ath11k_pdev *pdev;
struct wmi_set_current_country_params set_current_param = {};
int ret, i;
spin_lock_bh(&ab->base_lock);
memcpy(&set_current_param.alpha2, &ab->new_alpha2, 2);
spin_unlock_bh(&ab->base_lock);
ath11k_dbg(ab, ATH11K_DBG_WMI, "update 11d new cc %c%c\n",
set_current_param.alpha2[0],
set_current_param.alpha2[1]);
for (i = 0; i < ab->num_radios; i++) {
pdev = &ab->pdevs[i];
ar = pdev->ar;
memcpy(&ar->alpha2, &set_current_param.alpha2, 2);
ret = ath11k_wmi_send_set_current_country_cmd(ar, &set_current_param);
if (ret)
ath11k_warn(ar->ab,
"pdev id %d failed set current country code: %d\n",
i, ret);
}
}
static void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab)
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
{
struct ath11k *ar;
struct ath11k_pdev *pdev;
int i;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
spin_lock_bh(&ab->base_lock);
ab->stats.fw_crash_counter++;
spin_unlock_bh(&ab->base_lock);
for (i = 0; i < ab->num_radios; i++) {
pdev = &ab->pdevs[i];
ar = pdev->ar;
if (!ar || ar->state == ATH11K_STATE_OFF)
continue;
ieee80211_stop_queues(ar->hw);
ath11k_mac_drain_tx(ar);
ath11k: reset 11d state in process of recovery When doing simulate_fw_crash operation periodically with a short interval time such as 10 seconds, it is easy happened WMI command timed out for WMI_SCAN_CHAN_LIST_CMDID in ath11k_reg_update_chan_list(). log: [42287.610053] ath11k_pci 0000:01:00.0: wmi command 12291 timeout [42287.610064] ath11k_pci 0000:01:00.0: failed to send WMI_SCAN_CHAN_LIST cmd [42287.610073] ath11k_pci 0000:01:00.0: failed to perform regd update : -11 Note that this issue does not occur with a longer interval such as 20 seconds. The reason the issue occurs with a shorter interval is the following steps: 1) Upon initial boot, or after device recovery, the initial hw scan plus the 11d scan will run, and when 6 GHz support is present, these scans can take up to 12 seconds to complete, so ath11k_reg_update_chan_list() is still waiting the completion of ar->completed_11d_scan. 2) If a simulate_fw_crash operation is received during this time, those scans do not complete, and ath11k_core_pre_reconfigure_recovery() complete the ar->completed_11d_scan, then ath11k_reg_update_chan_list() wakeup and start to send WMI_SCAN_CHAN_LIST_CMDID, but firmware is crashed at this moment, so wmi timed out occur. To address this issue, reset the 11d state during device recovery so that WMI_SCAN_CHAN_LIST_CMDID does not timed out for short interval time such as 10 seconds. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 1f682dc9fb37 ("ath11k: reduce the wait time of 11d scan and hw scan while add interface") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220505034636.29582-1-quic_wgong@quicinc.com
2022-05-05 11:46:36 +08:00
ar->state_11d = ATH11K_11D_IDLE;
ath11k: reduce the wait time of 11d scan and hw scan while add interface Currently ath11k will wait 11d scan complete while add interface in ath11k_mac_op_add_interface(), when system resume without enable wowlan, ath11k_mac_op_add_interface() is called for each resume, thus it increase the resume time of system. And ath11k_mac_op_hw_scan() after ath11k_mac_op_add_interface() also needs some time cost because the previous 11d scan need more than 5 seconds when 6 GHz is enabled, then the scan started event will indicated to ath11k after the 11d scan completed. While 11d scan/hw scan is running in firmware, if ath11k update channel list to firmware by WMI_SCAN_CHAN_LIST_CMDID, then firmware will cancel the current scan which is running, it lead the scan failed. The patch commit 9dcf6808b253 ("ath11k: add 11d scan offload support") used finish_11d_scan/finish_11d_ch_list/pending_11d to synchronize the 11d scan/hw scan/channel list between ath11k/firmware/mac80211 and to avoid the scan fail. Add wait operation before ath11k update channel list, function ath11k_reg_update_chan_list() will wait until the current 11d scan/hw scan completed. And remove the wait operation of start 11d scan and waiting channel list complete in hw scan. After these changes, resume time cost reduce about 5 seconds and also hw scan time cost reduced obviously, and scan failed not seen. The 11d scan is sent to firmware only one time for each interface added in mac.c, and it is moved after the 1st hw scan because 11d scan will cost some time and thus leads the AP scan result update to UI delay. Currently priority of ath11k's hw scan is WMI_SCAN_PRIORITY_LOW, and priority of 11d scan in firmware is WMI_SCAN_PRIORITY_MEDIUM, then the 11d scan which sent after hw scan will cancel the hw scan in firmware, so change the priority to WMI_SCAN_PRIORITY_MEDIUM for the hw scan which is in front of the 11d scan, thus it will not happen scan cancel in firmware. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 9dcf6808b253 ("ath11k: add 11d scan offload support") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220328035832.14122-1-quic_wgong@quicinc.com
2022-03-28 11:58:32 +08:00
complete(&ar->completed_11d_scan);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
complete(&ar->scan.started);
complete(&ar->scan.completed);
complete(&ar->scan.on_channel);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
complete(&ar->peer_assoc_done);
complete(&ar->peer_delete_done);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
complete(&ar->install_key_done);
complete(&ar->vdev_setup_done);
complete(&ar->vdev_delete_done);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
complete(&ar->bss_survey_done);
complete(&ar->thermal.wmi_sync);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
wake_up(&ar->dp.tx_empty_waitq);
idr_for_each(&ar->txmgmt_idr,
ath11k_mac_tx_mgmt_pending_free, ar);
idr_destroy(&ar->txmgmt_idr);
ath11k: add wait operation for tx management packets for flush from mac80211 In ath11k, tx of management packet is doing in a work queue. Sometimes the workqueue does not finish tx immediately, then it lead after the next step of vdev delete finished, it start to send the management packet to firmware and lead firmware crash. ieee80211_set_disassoc() have logic of ieee80211_flush_queues() after it send_deauth_disassoc() to ath11k, its purpose is make sure the deauth was actually sent, so it need to change ath11k to match the purpose of mac80211. To address these issue wait for tx mgmt as well as tx data packets. dmesg log of connect/disconnect to AP: [ 307.522226] wls1: authenticate with 62:66:e4:e9:6a:a9 [ 307.586565] wls1: send auth to 62:66:e4:e9:6a:a9 (try 1/3) [ 307.586581] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0 [ 307.586922] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0 [ 307.590179] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0 [ 307.590181] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0 [ 307.598699] wls1: authenticated [ 307.599483] wls1: associate with 62:66:e4:e9:6a:a9 (try 1/3) [ 307.599506] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0 [ 307.599519] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0 [ 307.603059] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0 [ 307.603063] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0 [ 307.637105] wls1: associated [ 317.365239] wls1: deauthenticating from 62:66:e4:e9:6a:a9 by local choice (Reason: 3=DEAUTH_LEAVING) [ 317.368104] ath11k_pci 0000:05:00.0: mac tx mgmt frame, buf id 0 [ 317.372622] ath11k_pci 0000:05:00.0: mac tx mgmt frame, vdev_id 0 [ 317.378320] ath11k_pci 0000:05:00.0: wmi mgmt tx comp pending 0 desc id 0 [ 317.378330] ath11k_pci 0000:05:00.0: mgmt tx compl ev pdev_id 2, desc_id 0, status 0 [ 317.378359] ath11k_pci 0000:05:00.0: mac mgmt tx flush mgmt pending 0 [ 317.421066] ath11k_pci 0000:05:00.0: mac mgmt tx flush mgmt pending 0 [ 317.421427] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0) Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01230-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211202063705.14321-1-quic_wgong@quicinc.com
2021-12-02 14:37:05 +08:00
wake_up(&ar->txmgmt_empty_waitq);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
}
wake_up(&ab->wmi_ab.tx_credits_wq);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
wake_up(&ab->peer_mapping_wq);
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
static void ath11k_core_post_reconfigure_recovery(struct ath11k_base *ab)
{
struct ath11k *ar;
struct ath11k_pdev *pdev;
int i;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
for (i = 0; i < ab->num_radios; i++) {
pdev = &ab->pdevs[i];
ar = pdev->ar;
if (!ar || ar->state == ATH11K_STATE_OFF)
continue;
mutex_lock(&ar->conf_mutex);
switch (ar->state) {
case ATH11K_STATE_ON:
ar->state = ATH11K_STATE_RESTARTING;
ath11k_core_halt(ar);
ieee80211_restart_hw(ar->hw);
break;
case ATH11K_STATE_OFF:
ath11k_warn(ab,
"cannot restart radio %d that hasn't been started\n",
i);
break;
case ATH11K_STATE_RESTARTING:
break;
case ATH11K_STATE_RESTARTED:
ar->state = ATH11K_STATE_WEDGED;
fallthrough;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
case ATH11K_STATE_WEDGED:
ath11k_warn(ab,
"device is wedged, will not restart radio %d\n", i);
break;
}
mutex_unlock(&ar->conf_mutex);
}
complete(&ab->driver_recovery);
}
static void ath11k_core_restart(struct work_struct *work)
{
struct ath11k_base *ab = container_of(work, struct ath11k_base, restart_work);
int ret;
if (!ab->is_reset)
ath11k_core_pre_reconfigure_recovery(ab);
ret = ath11k_core_reconfigure_on_crash(ab);
if (ret) {
ath11k_err(ab, "failed to reconfigure driver on crash recovery\n");
return;
}
if (ab->is_reset)
complete_all(&ab->reconfigure_complete);
if (!ab->is_reset)
ath11k_core_post_reconfigure_recovery(ab);
}
ath11k: add support for device recovery for QCA6390/WCN6855 Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390/WCN6855 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220228064606.8981-2-quic_wgong@quicinc.com
2022-02-28 14:46:03 +08:00
static void ath11k_core_reset(struct work_struct *work)
{
struct ath11k_base *ab = container_of(work, struct ath11k_base, reset_work);
int reset_count, fail_cont_count;
long time_left;
if (!(test_bit(ATH11K_FLAG_REGISTERED, &ab->dev_flags))) {
ath11k_warn(ab, "ignore reset dev flags 0x%lx\n", ab->dev_flags);
return;
}
/* Sometimes the recovery will fail and then the next all recovery fail,
* this is to avoid infinite recovery since it can not recovery success.
*/
fail_cont_count = atomic_read(&ab->fail_cont_count);
if (fail_cont_count >= ATH11K_RESET_MAX_FAIL_COUNT_FINAL)
return;
if (fail_cont_count >= ATH11K_RESET_MAX_FAIL_COUNT_FIRST &&
time_before(jiffies, ab->reset_fail_timeout))
return;
reset_count = atomic_inc_return(&ab->reset_count);
if (reset_count > 1) {
/* Sometimes it happened another reset worker before the previous one
* completed, then the second reset worker will destroy the previous one,
* thus below is to avoid that.
*/
ath11k_warn(ab, "already resetting count %d\n", reset_count);
ath11k: add support for device recovery for QCA6390/WCN6855 Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390/WCN6855 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220228064606.8981-2-quic_wgong@quicinc.com
2022-02-28 14:46:03 +08:00
reinit_completion(&ab->reset_complete);
time_left = wait_for_completion_timeout(&ab->reset_complete,
ATH11K_RESET_TIMEOUT_HZ);
if (time_left) {
ath11k_dbg(ab, ATH11K_DBG_BOOT, "to skip reset\n");
atomic_dec(&ab->reset_count);
return;
}
ab->reset_fail_timeout = jiffies + ATH11K_RESET_FAIL_TIMEOUT_HZ;
/* Record the continuous recovery fail count when recovery failed*/
atomic_inc(&ab->fail_cont_count);
}
ath11k_dbg(ab, ATH11K_DBG_BOOT, "reset starting\n");
ab->is_reset = true;
atomic_set(&ab->recovery_count, 0);
reinit_completion(&ab->recovery_start);
atomic_set(&ab->recovery_start_count, 0);
ath11k_core_pre_reconfigure_recovery(ab);
reinit_completion(&ab->reconfigure_complete);
ath11k_core_post_reconfigure_recovery(ab);
ath11k_dbg(ab, ATH11K_DBG_BOOT, "waiting recovery start...\n");
time_left = wait_for_completion_timeout(&ab->recovery_start,
ATH11K_RECOVER_START_TIMEOUT_HZ);
ath11k: add support for device recovery for QCA6390/WCN6855 Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390/WCN6855 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220228064606.8981-2-quic_wgong@quicinc.com
2022-02-28 14:46:03 +08:00
ath11k_hif_power_down(ab);
ath11k_hif_power_up(ab);
ath11k_dbg(ab, ATH11K_DBG_BOOT, "reset started\n");
}
static int ath11k_init_hw_params(struct ath11k_base *ab)
{
const struct ath11k_hw_params *hw_params = NULL;
int i;
for (i = 0; i < ARRAY_SIZE(ath11k_hw_params); i++) {
hw_params = &ath11k_hw_params[i];
if (hw_params->hw_rev == ab->hw_rev)
break;
}
if (i == ARRAY_SIZE(ath11k_hw_params)) {
ath11k_err(ab, "Unsupported hardware version: 0x%x\n", ab->hw_rev);
return -EINVAL;
}
ab->hw_params = *hw_params;
ath11k_info(ab, "%s\n", ab->hw_params.name);
return 0;
}
int ath11k_core_pre_init(struct ath11k_base *ab)
{
int ret;
ret = ath11k_init_hw_params(ab);
if (ret) {
ath11k_err(ab, "failed to get hw params: %d\n", ret);
return ret;
}
return 0;
}
EXPORT_SYMBOL(ath11k_core_pre_init);
int ath11k_core_init(struct ath11k_base *ab)
{
int ret;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ret = ath11k_core_soc_create(ab);
if (ret) {
ath11k_err(ab, "failed to create soc core: %d\n", ret);
return ret;
}
return 0;
}
EXPORT_SYMBOL(ath11k_core_init);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
void ath11k_core_deinit(struct ath11k_base *ab)
{
mutex_lock(&ab->core_lock);
ath11k_core_pdev_destroy(ab);
ath11k_core_stop(ab);
mutex_unlock(&ab->core_lock);
ath11k_hif_power_down(ab);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ath11k_mac_destroy(ab);
ath11k_core_soc_destroy(ab);
}
EXPORT_SYMBOL(ath11k_core_deinit);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
void ath11k_core_free(struct ath11k_base *ab)
{
ath11k: add support for device recovery for QCA6390/WCN6855 Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390/WCN6855 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220228064606.8981-2-quic_wgong@quicinc.com
2022-02-28 14:46:03 +08:00
destroy_workqueue(ab->workqueue_aux);
destroy_workqueue(ab->workqueue);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
kfree(ab);
}
EXPORT_SYMBOL(ath11k_core_free);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
struct ath11k_base *ath11k_core_alloc(struct device *dev, size_t priv_size,
enum ath11k_bus bus)
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
{
struct ath11k_base *ab;
ab = kzalloc(sizeof(*ab) + priv_size, GFP_KERNEL);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
if (!ab)
return NULL;
init_completion(&ab->driver_recovery);
ab->workqueue = create_singlethread_workqueue("ath11k_wq");
if (!ab->workqueue)
goto err_sc_free;
ath11k: add support for device recovery for QCA6390/WCN6855 Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390/WCN6855 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220228064606.8981-2-quic_wgong@quicinc.com
2022-02-28 14:46:03 +08:00
ab->workqueue_aux = create_singlethread_workqueue("ath11k_aux_wq");
if (!ab->workqueue_aux)
goto err_free_wq;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
mutex_init(&ab->core_lock);
mutex_init(&ab->tbl_mtx_lock);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
spin_lock_init(&ab->base_lock);
mutex_init(&ab->vdev_id_11d_lock);
ath11k: add support for device recovery for QCA6390/WCN6855 Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390/WCN6855 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220228064606.8981-2-quic_wgong@quicinc.com
2022-02-28 14:46:03 +08:00
init_completion(&ab->reset_complete);
init_completion(&ab->reconfigure_complete);
init_completion(&ab->recovery_start);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
INIT_LIST_HEAD(&ab->peers);
init_waitqueue_head(&ab->peer_mapping_wq);
init_waitqueue_head(&ab->wmi_ab.tx_credits_wq);
init_waitqueue_head(&ab->qmi.cold_boot_waitq);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
INIT_WORK(&ab->restart_work, ath11k_core_restart);
INIT_WORK(&ab->update_11d_work, ath11k_update_11d);
ath11k: add support for device recovery for QCA6390/WCN6855 Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390/WCN6855 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220228064606.8981-2-quic_wgong@quicinc.com
2022-02-28 14:46:03 +08:00
INIT_WORK(&ab->reset_work, ath11k_core_reset);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
timer_setup(&ab->rx_replenish_retry, ath11k_ce_rx_replenish_retry, 0);
init_completion(&ab->htc_suspend);
init_completion(&ab->wow.wakeup_completed);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
ab->dev = dev;
ab->hif.bus = bus;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
return ab;
ath11k: add support for device recovery for QCA6390/WCN6855 Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390/WCN6855 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220228064606.8981-2-quic_wgong@quicinc.com
2022-02-28 14:46:03 +08:00
err_free_wq:
destroy_workqueue(ab->workqueue);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 15:58:40 +08:00
err_sc_free:
kfree(ab);
return NULL;
}
EXPORT_SYMBOL(ath11k_core_alloc);
MODULE_DESCRIPTION("Core module for Qualcomm Atheros 802.11ax wireless LAN cards.");
MODULE_LICENSE("Dual BSD/GPL");