OpenCloudOS-Kernel/drivers/iommu/intel-iommu.c

5553 lines
139 KiB
C
Raw Normal View History

/*
* Copyright © 2006-2014 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* Authors: David Woodhouse <dwmw2@infradead.org>,
* Ashok Raj <ashok.raj@intel.com>,
* Shaohua Li <shaohua.li@intel.com>,
* Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>,
* Fenghua Yu <fenghua.yu@intel.com>
* Joerg Roedel <jroedel@suse.de>
*/
#define pr_fmt(fmt) "DMAR: " fmt
#include <linux/init.h>
#include <linux/bitmap.h>
#include <linux/debugfs.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/dmar.h>
#include <linux/dma-mapping.h>
#include <linux/mempool.h>
#include <linux/memory.h>
#include <linux/cpu.h>
#include <linux/timer.h>
#include <linux/io.h>
#include <linux/iova.h>
#include <linux/iommu.h>
#include <linux/intel-iommu.h>
#include <linux/syscore_ops.h>
#include <linux/tboot.h>
#include <linux/dmi.h>
#include <linux/pci-ats.h>
#include <linux/memblock.h>
#include <linux/dma-contiguous.h>
#include <linux/crash_dump.h>
#include <asm/irq_remapping.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
#include "irq_remapping.h"
#define ROOT_SIZE VTD_PAGE_SIZE
#define CONTEXT_SIZE VTD_PAGE_SIZE
#define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
#define IS_USB_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_SERIAL_USB)
#define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
#define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e)
#define IOAPIC_RANGE_START (0xfee00000)
#define IOAPIC_RANGE_END (0xfeefffff)
#define IOVA_START_ADDR (0x1000)
#define DEFAULT_DOMAIN_ADDRESS_WIDTH 48
#define MAX_AGAW_WIDTH 64
#define MAX_AGAW_PFN_WIDTH (MAX_AGAW_WIDTH - VTD_PAGE_SHIFT)
#define __DOMAIN_MAX_PFN(gaw) ((((uint64_t)1) << (gaw-VTD_PAGE_SHIFT)) - 1)
#define __DOMAIN_MAX_ADDR(gaw) ((((uint64_t)1) << gaw) - 1)
/* We limit DOMAIN_MAX_PFN to fit in an unsigned long, and DOMAIN_MAX_ADDR
to match. That way, we can use 'unsigned long' for PFNs with impunity. */
#define DOMAIN_MAX_PFN(gaw) ((unsigned long) min_t(uint64_t, \
__DOMAIN_MAX_PFN(gaw), (unsigned long)-1))
#define DOMAIN_MAX_ADDR(gaw) (((uint64_t)__DOMAIN_MAX_PFN(gaw)) << VTD_PAGE_SHIFT)
/* IO virtual address start page frame number */
#define IOVA_START_PFN (1)
#define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT)
#define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32))
#define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64))
/* page table handling */
#define LEVEL_STRIDE (9)
#define LEVEL_MASK (((u64)1 << LEVEL_STRIDE) - 1)
/*
* This bitmap is used to advertise the page sizes our hardware support
* to the IOMMU core, which will then use this information to split
* physically contiguous memory regions it is mapping into page sizes
* that we support.
*
* Traditionally the IOMMU core just handed us the mappings directly,
* after making sure the size is an order of a 4KiB page and that the
* mapping has natural alignment.
*
* To retain this behavior, we currently advertise that we support
* all page sizes that are an order of 4KiB.
*
* If at some point we'd like to utilize the IOMMU core's new behavior,
* we could change this to advertise the real page sizes we support.
*/
#define INTEL_IOMMU_PGSIZES (~0xFFFUL)
static inline int agaw_to_level(int agaw)
{
return agaw + 2;
}
static inline int agaw_to_width(int agaw)
{
return min_t(int, 30 + agaw * LEVEL_STRIDE, MAX_AGAW_WIDTH);
}
static inline int width_to_agaw(int width)
{
return DIV_ROUND_UP(width - 30, LEVEL_STRIDE);
}
static inline unsigned int level_to_offset_bits(int level)
{
return (level - 1) * LEVEL_STRIDE;
}
static inline int pfn_level_offset(unsigned long pfn, int level)
{
return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK;
}
static inline unsigned long level_mask(int level)
{
return -1UL << level_to_offset_bits(level);
}
static inline unsigned long level_size(int level)
{
return 1UL << level_to_offset_bits(level);
}
static inline unsigned long align_to_level(unsigned long pfn, int level)
{
return (pfn + level_size(level) - 1) & level_mask(level);
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
static inline unsigned long lvl_to_nr_pages(unsigned int lvl)
{
return 1 << min_t(int, (lvl - 1) * LEVEL_STRIDE, MAX_AGAW_PFN_WIDTH);
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
/* VT-d pages must always be _smaller_ than MM pages. Otherwise things
are never going to work. */
static inline unsigned long dma_to_mm_pfn(unsigned long dma_pfn)
{
return dma_pfn >> (PAGE_SHIFT - VTD_PAGE_SHIFT);
}
static inline unsigned long mm_to_dma_pfn(unsigned long mm_pfn)
{
return mm_pfn << (PAGE_SHIFT - VTD_PAGE_SHIFT);
}
static inline unsigned long page_to_dma_pfn(struct page *pg)
{
return mm_to_dma_pfn(page_to_pfn(pg));
}
static inline unsigned long virt_to_dma_pfn(void *p)
{
return page_to_dma_pfn(virt_to_page(p));
}
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
static void __init check_tylersburg_isoch(void);
static int rwbf_quirk;
/*
* set to 1 to panic kernel if can't successfully enable VT-d
* (used when kernel is launched w/ TXT)
*/
static int force_on = 0;
/*
* 0: Present
* 1-11: Reserved
* 12-63: Context Ptr (12 - (haw-1))
* 64-127: Reserved
*/
struct root_entry {
u64 lo;
u64 hi;
};
#define ROOT_ENTRY_NR (VTD_PAGE_SIZE/sizeof(struct root_entry))
/*
* Take a root_entry and return the Lower Context Table Pointer (LCTP)
* if marked present.
*/
static phys_addr_t root_entry_lctp(struct root_entry *re)
{
if (!(re->lo & 1))
return 0;
return re->lo & VTD_PAGE_MASK;
}
/*
* Take a root_entry and return the Upper Context Table Pointer (UCTP)
* if marked present.
*/
static phys_addr_t root_entry_uctp(struct root_entry *re)
{
if (!(re->hi & 1))
return 0;
return re->hi & VTD_PAGE_MASK;
}
/*
* low 64 bits:
* 0: present
* 1: fault processing disable
* 2-3: translation type
* 12-63: address space root
* high 64 bits:
* 0-2: address width
* 3-6: aval
* 8-23: domain id
*/
struct context_entry {
u64 lo;
u64 hi;
};
static inline void context_clear_pasid_enable(struct context_entry *context)
{
context->lo &= ~(1ULL << 11);
}
static inline bool context_pasid_enabled(struct context_entry *context)
{
return !!(context->lo & (1ULL << 11));
}
static inline void context_set_copied(struct context_entry *context)
{
context->hi |= (1ull << 3);
}
static inline bool context_copied(struct context_entry *context)
{
return !!(context->hi & (1ULL << 3));
}
static inline bool __context_present(struct context_entry *context)
{
return (context->lo & 1);
}
static inline bool context_present(struct context_entry *context)
{
return context_pasid_enabled(context) ?
__context_present(context) :
__context_present(context) && !context_copied(context);
}
static inline void context_set_present(struct context_entry *context)
{
context->lo |= 1;
}
static inline void context_set_fault_enable(struct context_entry *context)
{
context->lo &= (((u64)-1) << 2) | 1;
}
static inline void context_set_translation_type(struct context_entry *context,
unsigned long value)
{
context->lo &= (((u64)-1) << 4) | 3;
context->lo |= (value & 3) << 2;
}
static inline void context_set_address_root(struct context_entry *context,
unsigned long value)
{
context->lo &= ~VTD_PAGE_MASK;
context->lo |= value & VTD_PAGE_MASK;
}
static inline void context_set_address_width(struct context_entry *context,
unsigned long value)
{
context->hi |= value & 7;
}
static inline void context_set_domain_id(struct context_entry *context,
unsigned long value)
{
context->hi |= (value & ((1 << 16) - 1)) << 8;
}
static inline int context_domain_id(struct context_entry *c)
{
return((c->hi >> 8) & 0xffff);
}
static inline void context_clear_entry(struct context_entry *context)
{
context->lo = 0;
context->hi = 0;
}
/*
* 0: readable
* 1: writable
* 2-6: reserved
* 7: super page
* 8-10: available
* 11: snoop behavior
* 12-63: Host physcial address
*/
struct dma_pte {
u64 val;
};
static inline void dma_clear_pte(struct dma_pte *pte)
{
pte->val = 0;
}
static inline u64 dma_pte_addr(struct dma_pte *pte)
{
#ifdef CONFIG_64BIT
return pte->val & VTD_PAGE_MASK;
#else
/* Must have a full atomic 64-bit read */
return __cmpxchg64(&pte->val, 0ULL, 0ULL) & VTD_PAGE_MASK;
#endif
}
static inline bool dma_pte_present(struct dma_pte *pte)
{
return (pte->val & 3) != 0;
}
static inline bool dma_pte_superpage(struct dma_pte *pte)
{
return (pte->val & DMA_PTE_LARGE_PAGE);
}
static inline int first_pte_in_page(struct dma_pte *pte)
{
return !((unsigned long)pte & ~VTD_PAGE_MASK);
}
/*
* This domain is a statically identity mapping domain.
* 1. This domain creats a static 1:1 mapping to all usable memory.
* 2. It maps to each iommu if successful.
* 3. Each iommu mapps to this domain if successful.
*/
static struct dmar_domain *si_domain;
static int hw_pass_through = 1;
/*
* Domain represents a virtual machine, more than one devices
* across iommus may be owned in one domain, e.g. kvm guest.
*/
#define DOMAIN_FLAG_VIRTUAL_MACHINE (1 << 0)
/* si_domain contains mulitple devices */
#define DOMAIN_FLAG_STATIC_IDENTITY (1 << 1)
#define for_each_domain_iommu(idx, domain) \
for (idx = 0; idx < g_num_of_iommus; idx++) \
if (domain->iommu_refcnt[idx])
struct dmar_domain {
int nid; /* node id */
unsigned iommu_refcnt[DMAR_UNITS_SUPPORTED];
/* Refcount of devices per iommu */
u16 iommu_did[DMAR_UNITS_SUPPORTED];
/* Domain ids per IOMMU. Use u16 since
* domain ids are 16 bit wide according
* to VT-d spec, section 9.3 */
bool has_iotlb_device;
struct list_head devices; /* all devices' list */
struct iova_domain iovad; /* iova's that belong to this domain */
struct dma_pte *pgd; /* virtual address */
int gaw; /* max guest address width */
/* adjusted guest address width, 0 is level 2 30-bit */
int agaw;
int flags; /* flags to find out type of domain */
int iommu_coherency;/* indicate coherency of iommu access */
int iommu_snooping; /* indicate snooping control feature*/
int iommu_count; /* reference count of iommu */
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
int iommu_superpage;/* Level of superpages supported:
0 == 4KiB (no superpages), 1 == 2MiB,
2 == 1GiB, 3 == 512GiB, 4 == 1TiB */
u64 max_addr; /* maximum mapped address */
struct iommu_domain domain; /* generic domain data structure for
iommu core */
};
/* PCI domain-device relationship */
struct device_domain_info {
struct list_head link; /* link to domain siblings */
struct list_head global; /* link to global list */
u8 bus; /* PCI bus number */
u8 devfn; /* PCI devfn number */
u8 pasid_supported:3;
u8 pasid_enabled:1;
u8 pri_supported:1;
u8 pri_enabled:1;
u8 ats_supported:1;
u8 ats_enabled:1;
u8 ats_qdep;
struct device *dev; /* it's NULL for PCIe-to-PCI bridge */
struct intel_iommu *iommu; /* IOMMU used by this device */
struct dmar_domain *domain; /* pointer to domain */
};
struct dmar_rmrr_unit {
struct list_head list; /* list of rmrr units */
struct acpi_dmar_header *hdr; /* ACPI header */
u64 base_address; /* reserved base address*/
u64 end_address; /* reserved end address */
struct dmar_dev_scope *devices; /* target devices */
int devices_cnt; /* target device count */
struct iommu_resv_region *resv; /* reserved region handle */
};
struct dmar_atsr_unit {
struct list_head list; /* list of ATSR units */
struct acpi_dmar_header *hdr; /* ACPI header */
struct dmar_dev_scope *devices; /* target devices */
int devices_cnt; /* target device count */
u8 include_all:1; /* include all ports */
};
static LIST_HEAD(dmar_atsr_units);
static LIST_HEAD(dmar_rmrr_units);
#define for_each_rmrr_units(rmrr) \
list_for_each_entry(rmrr, &dmar_rmrr_units, list)
static void flush_unmaps_timeout(unsigned long data);
struct deferred_flush_entry {
unsigned long iova_pfn;
unsigned long nrpages;
struct dmar_domain *domain;
struct page *freelist;
};
#define HIGH_WATER_MARK 250
struct deferred_flush_table {
int next;
struct deferred_flush_entry entries[HIGH_WATER_MARK];
};
struct deferred_flush_data {
spinlock_t lock;
int timer_on;
struct timer_list timer;
long size;
struct deferred_flush_table *tables;
};
DEFINE_PER_CPU(struct deferred_flush_data, deferred_flush);
/* bitmap for indexing intel_iommus */
static int g_num_of_iommus;
static void domain_exit(struct dmar_domain *domain);
static void domain_remove_dev_info(struct dmar_domain *domain);
static void dmar_remove_one_dev_info(struct dmar_domain *domain,
struct device *dev);
static void __dmar_remove_one_dev_info(struct device_domain_info *info);
static void domain_context_clear(struct intel_iommu *iommu,
struct device *dev);
static int domain_detach_iommu(struct dmar_domain *domain,
struct intel_iommu *iommu);
#ifdef CONFIG_INTEL_IOMMU_DEFAULT_ON
int dmar_disabled = 0;
#else
int dmar_disabled = 1;
#endif /*CONFIG_INTEL_IOMMU_DEFAULT_ON*/
int intel_iommu_enabled = 0;
EXPORT_SYMBOL_GPL(intel_iommu_enabled);
static int dmar_map_gfx = 1;
static int dmar_forcedac;
static int intel_iommu_strict;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
static int intel_iommu_superpage = 1;
iommu/vt-d: Only enable extended context tables if PASID is supported Although the extended tables are theoretically a completely orthogonal feature to PASID and anything else that *uses* the newly-available bits, some of the early hardware has problems even when all we do is enable them and use only the same bits that were in the old context tables. For now, there's no motivation to support extended tables unless we're going to use PASID support to do SVM. So just don't use them unless PASID support is advertised too. Also add a command-line bailout just in case later chips also have issues. The equivalent problem for PASID support has already been fixed with the upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register"), because the problematic platforms use the old definition of the PASID-capable bit, which is now marked as reserved and meaningless. So with this change, we'll magically start using ECS again only when we see the new hardware advertising "hey, we have PASID support and we actually tested it this time" on bit 40. The VT-d hardware architect has promised that we are not going to have any reason to support ECS *without* PASID any time soon, and he'll make sure he checks with us before changing that. In the future, if hypothetical new features also use new bits in the context tables and can be seen on implementations *without* PASID support, we might need to add their feature bits to the ecs_enabled() macro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-12 17:15:49 +08:00
static int intel_iommu_ecs = 1;
static int intel_iommu_pasid28;
static int iommu_identity_mapping;
iommu/vt-d: Only enable extended context tables if PASID is supported Although the extended tables are theoretically a completely orthogonal feature to PASID and anything else that *uses* the newly-available bits, some of the early hardware has problems even when all we do is enable them and use only the same bits that were in the old context tables. For now, there's no motivation to support extended tables unless we're going to use PASID support to do SVM. So just don't use them unless PASID support is advertised too. Also add a command-line bailout just in case later chips also have issues. The equivalent problem for PASID support has already been fixed with the upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register"), because the problematic platforms use the old definition of the PASID-capable bit, which is now marked as reserved and meaningless. So with this change, we'll magically start using ECS again only when we see the new hardware advertising "hey, we have PASID support and we actually tested it this time" on bit 40. The VT-d hardware architect has promised that we are not going to have any reason to support ECS *without* PASID any time soon, and he'll make sure he checks with us before changing that. In the future, if hypothetical new features also use new bits in the context tables and can be seen on implementations *without* PASID support, we might need to add their feature bits to the ecs_enabled() macro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-12 17:15:49 +08:00
#define IDENTMAP_ALL 1
#define IDENTMAP_GFX 2
#define IDENTMAP_AZALIA 4
iommu/vt-d: Only enable extended context tables if PASID is supported Although the extended tables are theoretically a completely orthogonal feature to PASID and anything else that *uses* the newly-available bits, some of the early hardware has problems even when all we do is enable them and use only the same bits that were in the old context tables. For now, there's no motivation to support extended tables unless we're going to use PASID support to do SVM. So just don't use them unless PASID support is advertised too. Also add a command-line bailout just in case later chips also have issues. The equivalent problem for PASID support has already been fixed with the upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register"), because the problematic platforms use the old definition of the PASID-capable bit, which is now marked as reserved and meaningless. So with this change, we'll magically start using ECS again only when we see the new hardware advertising "hey, we have PASID support and we actually tested it this time" on bit 40. The VT-d hardware architect has promised that we are not going to have any reason to support ECS *without* PASID any time soon, and he'll make sure he checks with us before changing that. In the future, if hypothetical new features also use new bits in the context tables and can be seen on implementations *without* PASID support, we might need to add their feature bits to the ecs_enabled() macro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-12 17:15:49 +08:00
/* Broadwell and Skylake have broken ECS support — normal so-called "second
* level" translation of DMA requests-without-PASID doesn't actually happen
* unless you also set the NESTE bit in an extended context-entry. Which of
* course means that SVM doesn't work because it's trying to do nested
* translation of the physical addresses it finds in the process page tables,
* through the IOVA->phys mapping found in the "second level" page tables.
*
* The VT-d specification was retroactively changed to change the definition
* of the capability bits and pretend that Broadwell/Skylake never happened...
* but unfortunately the wrong bit was changed. It's ECS which is broken, but
* for some reason it was the PASID capability bit which was redefined (from
* bit 28 on BDW/SKL to bit 40 in future).
*
* So our test for ECS needs to eschew those implementations which set the old
* PASID capabiity bit 28, since those are the ones on which ECS is broken.
* Unless we are working around the 'pasid28' limitations, that is, by putting
* the device into passthrough mode for normal DMA and thus masking the bug.
*/
iommu/vt-d: Only enable extended context tables if PASID is supported Although the extended tables are theoretically a completely orthogonal feature to PASID and anything else that *uses* the newly-available bits, some of the early hardware has problems even when all we do is enable them and use only the same bits that were in the old context tables. For now, there's no motivation to support extended tables unless we're going to use PASID support to do SVM. So just don't use them unless PASID support is advertised too. Also add a command-line bailout just in case later chips also have issues. The equivalent problem for PASID support has already been fixed with the upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register"), because the problematic platforms use the old definition of the PASID-capable bit, which is now marked as reserved and meaningless. So with this change, we'll magically start using ECS again only when we see the new hardware advertising "hey, we have PASID support and we actually tested it this time" on bit 40. The VT-d hardware architect has promised that we are not going to have any reason to support ECS *without* PASID any time soon, and he'll make sure he checks with us before changing that. In the future, if hypothetical new features also use new bits in the context tables and can be seen on implementations *without* PASID support, we might need to add their feature bits to the ecs_enabled() macro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-12 17:15:49 +08:00
#define ecs_enabled(iommu) (intel_iommu_ecs && ecap_ecs(iommu->ecap) && \
(intel_iommu_pasid28 || !ecap_broken_pasid(iommu->ecap)))
/* PASID support is thus enabled if ECS is enabled and *either* of the old
* or new capability bits are set. */
#define pasid_enabled(iommu) (ecs_enabled(iommu) && \
(ecap_pasid(iommu->ecap) || ecap_broken_pasid(iommu->ecap)))
int intel_iommu_gfx_mapped;
EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped);
#define DUMMY_DEVICE_DOMAIN_INFO ((struct device_domain_info *)(-1))
static DEFINE_SPINLOCK(device_domain_lock);
static LIST_HEAD(device_domain_list);
const struct iommu_ops intel_iommu_ops;
static bool translation_pre_enabled(struct intel_iommu *iommu)
{
return (iommu->flags & VTD_FLAG_TRANS_PRE_ENABLED);
}
static void clear_translation_pre_enabled(struct intel_iommu *iommu)
{
iommu->flags &= ~VTD_FLAG_TRANS_PRE_ENABLED;
}
static void init_translation_status(struct intel_iommu *iommu)
{
u32 gsts;
gsts = readl(iommu->reg + DMAR_GSTS_REG);
if (gsts & DMA_GSTS_TES)
iommu->flags |= VTD_FLAG_TRANS_PRE_ENABLED;
}
/* Convert generic 'struct iommu_domain to private struct dmar_domain */
static struct dmar_domain *to_dmar_domain(struct iommu_domain *dom)
{
return container_of(dom, struct dmar_domain, domain);
}
static int __init intel_iommu_setup(char *str)
{
if (!str)
return -EINVAL;
while (*str) {
if (!strncmp(str, "on", 2)) {
dmar_disabled = 0;
pr_info("IOMMU enabled\n");
} else if (!strncmp(str, "off", 3)) {
dmar_disabled = 1;
pr_info("IOMMU disabled\n");
} else if (!strncmp(str, "igfx_off", 8)) {
dmar_map_gfx = 0;
pr_info("Disable GFX device mapping\n");
} else if (!strncmp(str, "forcedac", 8)) {
pr_info("Forcing DAC for PCI devices\n");
dmar_forcedac = 1;
} else if (!strncmp(str, "strict", 6)) {
pr_info("Disable batched IOTLB flush\n");
intel_iommu_strict = 1;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
} else if (!strncmp(str, "sp_off", 6)) {
pr_info("Disable supported super page\n");
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
intel_iommu_superpage = 0;
iommu/vt-d: Only enable extended context tables if PASID is supported Although the extended tables are theoretically a completely orthogonal feature to PASID and anything else that *uses* the newly-available bits, some of the early hardware has problems even when all we do is enable them and use only the same bits that were in the old context tables. For now, there's no motivation to support extended tables unless we're going to use PASID support to do SVM. So just don't use them unless PASID support is advertised too. Also add a command-line bailout just in case later chips also have issues. The equivalent problem for PASID support has already been fixed with the upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register"), because the problematic platforms use the old definition of the PASID-capable bit, which is now marked as reserved and meaningless. So with this change, we'll magically start using ECS again only when we see the new hardware advertising "hey, we have PASID support and we actually tested it this time" on bit 40. The VT-d hardware architect has promised that we are not going to have any reason to support ECS *without* PASID any time soon, and he'll make sure he checks with us before changing that. In the future, if hypothetical new features also use new bits in the context tables and can be seen on implementations *without* PASID support, we might need to add their feature bits to the ecs_enabled() macro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-12 17:15:49 +08:00
} else if (!strncmp(str, "ecs_off", 7)) {
printk(KERN_INFO
"Intel-IOMMU: disable extended context table support\n");
intel_iommu_ecs = 0;
} else if (!strncmp(str, "pasid28", 7)) {
printk(KERN_INFO
"Intel-IOMMU: enable pre-production PASID support\n");
intel_iommu_pasid28 = 1;
iommu_identity_mapping |= IDENTMAP_GFX;
}
str += strcspn(str, ",");
while (*str == ',')
str++;
}
return 0;
}
__setup("intel_iommu=", intel_iommu_setup);
static struct kmem_cache *iommu_domain_cache;
static struct kmem_cache *iommu_devinfo_cache;
static struct dmar_domain* get_iommu_domain(struct intel_iommu *iommu, u16 did)
{
struct dmar_domain **domains;
int idx = did >> 8;
domains = iommu->domains[idx];
if (!domains)
return NULL;
return domains[did & 0xff];
}
static void set_iommu_domain(struct intel_iommu *iommu, u16 did,
struct dmar_domain *domain)
{
struct dmar_domain **domains;
int idx = did >> 8;
if (!iommu->domains[idx]) {
size_t size = 256 * sizeof(struct dmar_domain *);
iommu->domains[idx] = kzalloc(size, GFP_ATOMIC);
}
domains = iommu->domains[idx];
if (WARN_ON(!domains))
return;
else
domains[did & 0xff] = domain;
}
static inline void *alloc_pgtable_page(int node)
Intel IOMMU: Avoid memory allocation failures in dma map api calls Intel IOMMU driver needs memory during DMA map calls to setup its internal page tables and for other data structures. As we all know that these DMA map calls are mostly called in the interrupt context or with the spinlock held by the upper level drivers(network/storage drivers), so in order to avoid any memory allocation failure due to low memory issues, this patch makes memory allocation by temporarily setting PF_MEMALLOC flags for the current task before making memory allocation calls. We evaluated mempools as a backup when kmem_cache_alloc() fails and found that mempools are really not useful here because 1) We don't know for sure how much to reserve in advance 2) And mempools are not useful for GFP_ATOMIC case (as we call memory alloc functions with GFP_ATOMIC) (akpm: point 2 is wrong...) With PF_MEMALLOC flag set in the current->flags, the VM subsystem avoids any watermark checks before allocating memory thus guarantee'ing the memory till the last free page. Further, looking at the code in mm/page_alloc.c in __alloc_pages() function, looks like this flag is useful only in the non-interrupt context. If we are in the interrupt context and memory allocation in IOMMU driver fails for some reason, then the DMA map api's will return failure and it is up to the higher level drivers to retry. Suppose, if upper level driver programs the controller with the buggy DMA virtual address, the IOMMU will block that DMA transaction when that happens thus preventing any corruption to main memory. So far in our test scenario, we were unable to create any memory allocation failure inside dma map api calls. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:52 +08:00
{
struct page *page;
void *vaddr = NULL;
Intel IOMMU: Avoid memory allocation failures in dma map api calls Intel IOMMU driver needs memory during DMA map calls to setup its internal page tables and for other data structures. As we all know that these DMA map calls are mostly called in the interrupt context or with the spinlock held by the upper level drivers(network/storage drivers), so in order to avoid any memory allocation failure due to low memory issues, this patch makes memory allocation by temporarily setting PF_MEMALLOC flags for the current task before making memory allocation calls. We evaluated mempools as a backup when kmem_cache_alloc() fails and found that mempools are really not useful here because 1) We don't know for sure how much to reserve in advance 2) And mempools are not useful for GFP_ATOMIC case (as we call memory alloc functions with GFP_ATOMIC) (akpm: point 2 is wrong...) With PF_MEMALLOC flag set in the current->flags, the VM subsystem avoids any watermark checks before allocating memory thus guarantee'ing the memory till the last free page. Further, looking at the code in mm/page_alloc.c in __alloc_pages() function, looks like this flag is useful only in the non-interrupt context. If we are in the interrupt context and memory allocation in IOMMU driver fails for some reason, then the DMA map api's will return failure and it is up to the higher level drivers to retry. Suppose, if upper level driver programs the controller with the buggy DMA virtual address, the IOMMU will block that DMA transaction when that happens thus preventing any corruption to main memory. So far in our test scenario, we were unable to create any memory allocation failure inside dma map api calls. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:52 +08:00
page = alloc_pages_node(node, GFP_ATOMIC | __GFP_ZERO, 0);
if (page)
vaddr = page_address(page);
Intel IOMMU: Avoid memory allocation failures in dma map api calls Intel IOMMU driver needs memory during DMA map calls to setup its internal page tables and for other data structures. As we all know that these DMA map calls are mostly called in the interrupt context or with the spinlock held by the upper level drivers(network/storage drivers), so in order to avoid any memory allocation failure due to low memory issues, this patch makes memory allocation by temporarily setting PF_MEMALLOC flags for the current task before making memory allocation calls. We evaluated mempools as a backup when kmem_cache_alloc() fails and found that mempools are really not useful here because 1) We don't know for sure how much to reserve in advance 2) And mempools are not useful for GFP_ATOMIC case (as we call memory alloc functions with GFP_ATOMIC) (akpm: point 2 is wrong...) With PF_MEMALLOC flag set in the current->flags, the VM subsystem avoids any watermark checks before allocating memory thus guarantee'ing the memory till the last free page. Further, looking at the code in mm/page_alloc.c in __alloc_pages() function, looks like this flag is useful only in the non-interrupt context. If we are in the interrupt context and memory allocation in IOMMU driver fails for some reason, then the DMA map api's will return failure and it is up to the higher level drivers to retry. Suppose, if upper level driver programs the controller with the buggy DMA virtual address, the IOMMU will block that DMA transaction when that happens thus preventing any corruption to main memory. So far in our test scenario, we were unable to create any memory allocation failure inside dma map api calls. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:52 +08:00
return vaddr;
}
static inline void free_pgtable_page(void *vaddr)
{
free_page((unsigned long)vaddr);
}
static inline void *alloc_domain_mem(void)
{
return kmem_cache_alloc(iommu_domain_cache, GFP_ATOMIC);
}
static void free_domain_mem(void *vaddr)
{
kmem_cache_free(iommu_domain_cache, vaddr);
}
static inline void * alloc_devinfo_mem(void)
{
return kmem_cache_alloc(iommu_devinfo_cache, GFP_ATOMIC);
}
static inline void free_devinfo_mem(void *vaddr)
{
kmem_cache_free(iommu_devinfo_cache, vaddr);
}
static inline int domain_type_is_vm(struct dmar_domain *domain)
{
return domain->flags & DOMAIN_FLAG_VIRTUAL_MACHINE;
}
static inline int domain_type_is_si(struct dmar_domain *domain)
{
return domain->flags & DOMAIN_FLAG_STATIC_IDENTITY;
}
static inline int domain_type_is_vm_or_si(struct dmar_domain *domain)
{
return domain->flags & (DOMAIN_FLAG_VIRTUAL_MACHINE |
DOMAIN_FLAG_STATIC_IDENTITY);
}
static inline int domain_pfn_supported(struct dmar_domain *domain,
unsigned long pfn)
{
int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
return !(addr_width < BITS_PER_LONG && pfn >> addr_width);
}
static int __iommu_calculate_agaw(struct intel_iommu *iommu, int max_gaw)
{
unsigned long sagaw;
int agaw = -1;
sagaw = cap_sagaw(iommu->cap);
for (agaw = width_to_agaw(max_gaw);
agaw >= 0; agaw--) {
if (test_bit(agaw, &sagaw))
break;
}
return agaw;
}
/*
* Calculate max SAGAW for each iommu.
*/
int iommu_calculate_max_sagaw(struct intel_iommu *iommu)
{
return __iommu_calculate_agaw(iommu, MAX_AGAW_WIDTH);
}
/*
* calculate agaw for each iommu.
* "SAGAW" may be different across iommus, use a default agaw, and
* get a supported less agaw for iommus that don't support the default agaw.
*/
int iommu_calculate_agaw(struct intel_iommu *iommu)
{
return __iommu_calculate_agaw(iommu, DEFAULT_DOMAIN_ADDRESS_WIDTH);
}
/* This functionin only returns single iommu in a domain */
static struct intel_iommu *domain_get_iommu(struct dmar_domain *domain)
{
int iommu_id;
/* si_domain and vm domain should not get here. */
BUG_ON(domain_type_is_vm_or_si(domain));
for_each_domain_iommu(iommu_id, domain)
break;
if (iommu_id < 0 || iommu_id >= g_num_of_iommus)
return NULL;
return g_iommus[iommu_id];
}
static void domain_update_iommu_coherency(struct dmar_domain *domain)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
bool found = false;
int i;
domain->iommu_coherency = 1;
for_each_domain_iommu(i, domain) {
found = true;
if (!ecap_coherent(g_iommus[i]->ecap)) {
domain->iommu_coherency = 0;
break;
}
}
if (found)
return;
/* No hardware attached; use lowest common denominator */
rcu_read_lock();
for_each_active_iommu(iommu, drhd) {
if (!ecap_coherent(iommu->ecap)) {
domain->iommu_coherency = 0;
break;
}
}
rcu_read_unlock();
}
static int domain_update_iommu_snooping(struct intel_iommu *skip)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
int ret = 1;
rcu_read_lock();
for_each_active_iommu(iommu, drhd) {
if (iommu != skip) {
if (!ecap_sc_support(iommu->ecap)) {
ret = 0;
break;
}
}
}
rcu_read_unlock();
return ret;
}
static int domain_update_iommu_superpage(struct intel_iommu *skip)
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
int mask = 0xf;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
if (!intel_iommu_superpage) {
return 0;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
/* set iommu_superpage to the smallest common denominator */
rcu_read_lock();
for_each_active_iommu(iommu, drhd) {
if (iommu != skip) {
mask &= cap_super_page_val(iommu->cap);
if (!mask)
break;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
}
rcu_read_unlock();
return fls(mask);
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
/* Some capabilities may be different across iommus */
static void domain_update_iommu_cap(struct dmar_domain *domain)
{
domain_update_iommu_coherency(domain);
domain->iommu_snooping = domain_update_iommu_snooping(NULL);
domain->iommu_superpage = domain_update_iommu_superpage(NULL);
}
static inline struct context_entry *iommu_context_addr(struct intel_iommu *iommu,
u8 bus, u8 devfn, int alloc)
{
struct root_entry *root = &iommu->root_entry[bus];
struct context_entry *context;
u64 *entry;
entry = &root->lo;
iommu/vt-d: Only enable extended context tables if PASID is supported Although the extended tables are theoretically a completely orthogonal feature to PASID and anything else that *uses* the newly-available bits, some of the early hardware has problems even when all we do is enable them and use only the same bits that were in the old context tables. For now, there's no motivation to support extended tables unless we're going to use PASID support to do SVM. So just don't use them unless PASID support is advertised too. Also add a command-line bailout just in case later chips also have issues. The equivalent problem for PASID support has already been fixed with the upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register"), because the problematic platforms use the old definition of the PASID-capable bit, which is now marked as reserved and meaningless. So with this change, we'll magically start using ECS again only when we see the new hardware advertising "hey, we have PASID support and we actually tested it this time" on bit 40. The VT-d hardware architect has promised that we are not going to have any reason to support ECS *without* PASID any time soon, and he'll make sure he checks with us before changing that. In the future, if hypothetical new features also use new bits in the context tables and can be seen on implementations *without* PASID support, we might need to add their feature bits to the ecs_enabled() macro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-12 17:15:49 +08:00
if (ecs_enabled(iommu)) {
if (devfn >= 0x80) {
devfn -= 0x80;
entry = &root->hi;
}
devfn *= 2;
}
if (*entry & 1)
context = phys_to_virt(*entry & VTD_PAGE_MASK);
else {
unsigned long phy_addr;
if (!alloc)
return NULL;
context = alloc_pgtable_page(iommu->node);
if (!context)
return NULL;
__iommu_flush_cache(iommu, (void *)context, CONTEXT_SIZE);
phy_addr = virt_to_phys((void *)context);
*entry = phy_addr | 1;
__iommu_flush_cache(iommu, entry, sizeof(*entry));
}
return &context[devfn];
}
static int iommu_dummy(struct device *dev)
{
return dev->archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO;
}
static struct intel_iommu *device_to_iommu(struct device *dev, u8 *bus, u8 *devfn)
{
struct dmar_drhd_unit *drhd = NULL;
struct intel_iommu *iommu;
struct device *tmp;
struct pci_dev *ptmp, *pdev = NULL;
u16 segment = 0;
int i;
if (iommu_dummy(dev))
return NULL;
if (dev_is_pci(dev)) {
struct pci_dev *pf_pdev;
pdev = to_pci_dev(dev);
/* VFs aren't listed in scope tables; we need to look up
* the PF instead to find the IOMMU. */
pf_pdev = pci_physfn(pdev);
dev = &pf_pdev->dev;
segment = pci_domain_nr(pdev->bus);
} else if (has_acpi_companion(dev))
dev = &ACPI_COMPANION(dev)->dev;
rcu_read_lock();
for_each_active_iommu(iommu, drhd) {
if (pdev && segment != drhd->segment)
continue;
for_each_active_dev_scope(drhd->devices,
drhd->devices_cnt, i, tmp) {
if (tmp == dev) {
/* For a VF use its original BDF# not that of the PF
* which we used for the IOMMU lookup. Strictly speaking
* we could do this for all PCI devices; we only need to
* get the BDF# from the scope table for ACPI matches. */
if (pdev->is_virtfn)
goto got_pdev;
*bus = drhd->devices[i].bus;
*devfn = drhd->devices[i].devfn;
goto out;
}
if (!pdev || !dev_is_pci(tmp))
continue;
ptmp = to_pci_dev(tmp);
if (ptmp->subordinate &&
ptmp->subordinate->number <= pdev->bus->number &&
ptmp->subordinate->busn_res.end >= pdev->bus->number)
goto got_pdev;
}
if (pdev && drhd->include_all) {
got_pdev:
*bus = pdev->bus->number;
*devfn = pdev->devfn;
goto out;
}
}
iommu = NULL;
out:
rcu_read_unlock();
return iommu;
}
static void domain_flush_cache(struct dmar_domain *domain,
void *addr, int size)
{
if (!domain->iommu_coherency)
clflush_cache_range(addr, size);
}
static int device_context_mapped(struct intel_iommu *iommu, u8 bus, u8 devfn)
{
struct context_entry *context;
int ret = 0;
unsigned long flags;
spin_lock_irqsave(&iommu->lock, flags);
context = iommu_context_addr(iommu, bus, devfn, 0);
if (context)
ret = context_present(context);
spin_unlock_irqrestore(&iommu->lock, flags);
return ret;
}
static void clear_context_table(struct intel_iommu *iommu, u8 bus, u8 devfn)
{
struct context_entry *context;
unsigned long flags;
spin_lock_irqsave(&iommu->lock, flags);
context = iommu_context_addr(iommu, bus, devfn, 0);
if (context) {
context_clear_entry(context);
__iommu_flush_cache(iommu, context, sizeof(*context));
}
spin_unlock_irqrestore(&iommu->lock, flags);
}
static void free_context_table(struct intel_iommu *iommu)
{
int i;
unsigned long flags;
struct context_entry *context;
spin_lock_irqsave(&iommu->lock, flags);
if (!iommu->root_entry) {
goto out;
}
for (i = 0; i < ROOT_ENTRY_NR; i++) {
context = iommu_context_addr(iommu, i, 0, 0);
if (context)
free_pgtable_page(context);
iommu/vt-d: Only enable extended context tables if PASID is supported Although the extended tables are theoretically a completely orthogonal feature to PASID and anything else that *uses* the newly-available bits, some of the early hardware has problems even when all we do is enable them and use only the same bits that were in the old context tables. For now, there's no motivation to support extended tables unless we're going to use PASID support to do SVM. So just don't use them unless PASID support is advertised too. Also add a command-line bailout just in case later chips also have issues. The equivalent problem for PASID support has already been fixed with the upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register"), because the problematic platforms use the old definition of the PASID-capable bit, which is now marked as reserved and meaningless. So with this change, we'll magically start using ECS again only when we see the new hardware advertising "hey, we have PASID support and we actually tested it this time" on bit 40. The VT-d hardware architect has promised that we are not going to have any reason to support ECS *without* PASID any time soon, and he'll make sure he checks with us before changing that. In the future, if hypothetical new features also use new bits in the context tables and can be seen on implementations *without* PASID support, we might need to add their feature bits to the ecs_enabled() macro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-12 17:15:49 +08:00
if (!ecs_enabled(iommu))
continue;
context = iommu_context_addr(iommu, i, 0x80, 0);
if (context)
free_pgtable_page(context);
}
free_pgtable_page(iommu->root_entry);
iommu->root_entry = NULL;
out:
spin_unlock_irqrestore(&iommu->lock, flags);
}
static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
unsigned long pfn, int *target_level)
{
struct dma_pte *parent, *pte = NULL;
int level = agaw_to_level(domain->agaw);
int offset;
BUG_ON(!domain->pgd);
if (!domain_pfn_supported(domain, pfn))
/* Address beyond IOMMU's addressing capabilities. */
return NULL;
parent = domain->pgd;
while (1) {
void *tmp_page;
offset = pfn_level_offset(pfn, level);
pte = &parent[offset];
if (!*target_level && (dma_pte_superpage(pte) || !dma_pte_present(pte)))
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
break;
if (level == *target_level)
break;
if (!dma_pte_present(pte)) {
uint64_t pteval;
tmp_page = alloc_pgtable_page(domain->nid);
if (!tmp_page)
return NULL;
domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
pteval = ((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
if (cmpxchg64(&pte->val, 0ULL, pteval))
/* Someone else set it while we were thinking; use theirs. */
free_pgtable_page(tmp_page);
else
domain_flush_cache(domain, pte, sizeof(*pte));
}
if (level == 1)
break;
parent = phys_to_virt(dma_pte_addr(pte));
level--;
}
if (!*target_level)
*target_level = level;
return pte;
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
/* return address's pte at specific level */
static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain,
unsigned long pfn,
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
int level, int *large_page)
{
struct dma_pte *parent, *pte = NULL;
int total = agaw_to_level(domain->agaw);
int offset;
parent = domain->pgd;
while (level <= total) {
offset = pfn_level_offset(pfn, total);
pte = &parent[offset];
if (level == total)
return pte;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
if (!dma_pte_present(pte)) {
*large_page = total;
break;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
if (dma_pte_superpage(pte)) {
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
*large_page = total;
return pte;
}
parent = phys_to_virt(dma_pte_addr(pte));
total--;
}
return NULL;
}
/* clear last level pte, a tlb flush should be followed */
static void dma_pte_clear_range(struct dmar_domain *domain,
unsigned long start_pfn,
unsigned long last_pfn)
{
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
unsigned int large_page = 1;
struct dma_pte *first_pte, *pte;
BUG_ON(!domain_pfn_supported(domain, start_pfn));
BUG_ON(!domain_pfn_supported(domain, last_pfn));
BUG_ON(start_pfn > last_pfn);
/* we don't need lock here; nobody else touches the iova range */
do {
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
large_page = 1;
first_pte = pte = dma_pfn_level_pte(domain, start_pfn, 1, &large_page);
if (!pte) {
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
start_pfn = align_to_level(start_pfn + 1, large_page + 1);
continue;
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
do {
dma_clear_pte(pte);
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
start_pfn += lvl_to_nr_pages(large_page);
pte++;
} while (start_pfn <= last_pfn && !first_pte_in_page(pte));
domain_flush_cache(domain, first_pte,
(void *)pte - (void *)first_pte);
} while (start_pfn && start_pfn <= last_pfn);
}
static void dma_pte_free_level(struct dmar_domain *domain, int level,
struct dma_pte *pte, unsigned long pfn,
unsigned long start_pfn, unsigned long last_pfn)
{
pfn = max(start_pfn, pfn);
pte = &pte[pfn_level_offset(pfn, level)];
do {
unsigned long level_pfn;
struct dma_pte *level_pte;
if (!dma_pte_present(pte) || dma_pte_superpage(pte))
goto next;
iommu/vt-d: Don't over-free page table directories dma_pte_free_level() recurses down the IOMMU page tables and frees directory pages that are entirely contained in the given PFN range. Unfortunately, it incorrectly calculates the starting address covered by the PTE under consideration, which can lead to it clearing an entry that is still in use. This occurs if we have a scatterlist with an entry that has a length greater than 1026 MB and is aligned to 2 MB for both the IOMMU and physical addresses. For example, if __domain_mapping() is asked to map a two-entry scatterlist with 2 MB and 1028 MB segments to PFN 0xffff80000, it will ask if dma_pte_free_pagetable() is asked to PFNs from 0xffff80200 to 0xffffc05ff, it will also incorrectly clear the PFNs from 0xffff80000 to 0xffff801ff because of this issue. The current code will set level_pfn to 0xffff80200, and 0xffff80200-0xffffc01ff fits inside the range being cleared. Properly setting the level_pfn for the current level under consideration catches that this PTE is outside of the range being cleared. This patch also changes the value passed into dma_pte_free_level() when it recurses. This only affects the first PTE of the range being cleared, and is handled by the existing code that ensures we start our cursor no lower than start_pfn. This was found when using dma_map_sg() to map large chunks of contiguous memory, which immediatedly led to faults on the first access of the erroneously-deleted mappings. Fixes: 3269ee0bd668 ("intel-iommu: Fix leaks in pagetable freeing") Reviewed-by: Benjamin Serebrin <serebrin@google.com> Signed-off-by: David Dillow <dillow@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-01-31 11:11:11 +08:00
level_pfn = pfn & level_mask(level);
level_pte = phys_to_virt(dma_pte_addr(pte));
if (level > 2)
dma_pte_free_level(domain, level - 1, level_pte,
level_pfn, start_pfn, last_pfn);
/* If range covers entire pagetable, free it */
if (!(start_pfn > level_pfn ||
last_pfn < level_pfn + level_size(level) - 1)) {
dma_clear_pte(pte);
domain_flush_cache(domain, pte, sizeof(*pte));
free_pgtable_page(level_pte);
}
next:
pfn += level_size(level);
} while (!first_pte_in_page(++pte) && pfn <= last_pfn);
}
/* clear last level (leaf) ptes and free page table pages. */
static void dma_pte_free_pagetable(struct dmar_domain *domain,
unsigned long start_pfn,
unsigned long last_pfn)
{
BUG_ON(!domain_pfn_supported(domain, start_pfn));
BUG_ON(!domain_pfn_supported(domain, last_pfn));
BUG_ON(start_pfn > last_pfn);
dma_pte_clear_range(domain, start_pfn, last_pfn);
/* We don't need lock here; nobody else touches the iova range */
dma_pte_free_level(domain, agaw_to_level(domain->agaw),
domain->pgd, 0, start_pfn, last_pfn);
/* free pgd */
if (start_pfn == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) {
free_pgtable_page(domain->pgd);
domain->pgd = NULL;
}
}
/* When a page at a given level is being unlinked from its parent, we don't
need to *modify* it at all. All we need to do is make a list of all the
pages which can be freed just as soon as we've flushed the IOTLB and we
know the hardware page-walk will no longer touch them.
The 'pte' argument is the *parent* PTE, pointing to the page that is to
be freed. */
static struct page *dma_pte_list_pagetables(struct dmar_domain *domain,
int level, struct dma_pte *pte,
struct page *freelist)
{
struct page *pg;
pg = pfn_to_page(dma_pte_addr(pte) >> PAGE_SHIFT);
pg->freelist = freelist;
freelist = pg;
if (level == 1)
return freelist;
pte = page_address(pg);
do {
if (dma_pte_present(pte) && !dma_pte_superpage(pte))
freelist = dma_pte_list_pagetables(domain, level - 1,
pte, freelist);
pte++;
} while (!first_pte_in_page(pte));
return freelist;
}
static struct page *dma_pte_clear_level(struct dmar_domain *domain, int level,
struct dma_pte *pte, unsigned long pfn,
unsigned long start_pfn,
unsigned long last_pfn,
struct page *freelist)
{
struct dma_pte *first_pte = NULL, *last_pte = NULL;
pfn = max(start_pfn, pfn);
pte = &pte[pfn_level_offset(pfn, level)];
do {
unsigned long level_pfn;
if (!dma_pte_present(pte))
goto next;
level_pfn = pfn & level_mask(level);
/* If range covers entire pagetable, free it */
if (start_pfn <= level_pfn &&
last_pfn >= level_pfn + level_size(level) - 1) {
/* These suborbinate page tables are going away entirely. Don't
bother to clear them; we're just going to *free* them. */
if (level > 1 && !dma_pte_superpage(pte))
freelist = dma_pte_list_pagetables(domain, level - 1, pte, freelist);
dma_clear_pte(pte);
if (!first_pte)
first_pte = pte;
last_pte = pte;
} else if (level > 1) {
/* Recurse down into a level that isn't *entirely* obsolete */
freelist = dma_pte_clear_level(domain, level - 1,
phys_to_virt(dma_pte_addr(pte)),
level_pfn, start_pfn, last_pfn,
freelist);
}
next:
pfn += level_size(level);
} while (!first_pte_in_page(++pte) && pfn <= last_pfn);
if (first_pte)
domain_flush_cache(domain, first_pte,
(void *)++last_pte - (void *)first_pte);
return freelist;
}
/* We can't just free the pages because the IOMMU may still be walking
the page tables, and may have cached the intermediate levels. The
pages can only be freed after the IOTLB flush has been done. */
static struct page *domain_unmap(struct dmar_domain *domain,
unsigned long start_pfn,
unsigned long last_pfn)
{
struct page *freelist = NULL;
BUG_ON(!domain_pfn_supported(domain, start_pfn));
BUG_ON(!domain_pfn_supported(domain, last_pfn));
BUG_ON(start_pfn > last_pfn);
/* we don't need lock here; nobody else touches the iova range */
freelist = dma_pte_clear_level(domain, agaw_to_level(domain->agaw),
domain->pgd, 0, start_pfn, last_pfn, NULL);
/* free pgd */
if (start_pfn == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) {
struct page *pgd_page = virt_to_page(domain->pgd);
pgd_page->freelist = freelist;
freelist = pgd_page;
domain->pgd = NULL;
}
return freelist;
}
static void dma_free_pagelist(struct page *freelist)
{
struct page *pg;
while ((pg = freelist)) {
freelist = pg->freelist;
free_pgtable_page(page_address(pg));
}
}
/* iommu handling */
static int iommu_alloc_root_entry(struct intel_iommu *iommu)
{
struct root_entry *root;
unsigned long flags;
root = (struct root_entry *)alloc_pgtable_page(iommu->node);
if (!root) {
pr_err("Allocating root entry for %s failed\n",
iommu->name);
return -ENOMEM;
}
__iommu_flush_cache(iommu, root, ROOT_SIZE);
spin_lock_irqsave(&iommu->lock, flags);
iommu->root_entry = root;
spin_unlock_irqrestore(&iommu->lock, flags);
return 0;
}
static void iommu_set_root_entry(struct intel_iommu *iommu)
{
u64 addr;
u32 sts;
unsigned long flag;
addr = virt_to_phys(iommu->root_entry);
iommu/vt-d: Only enable extended context tables if PASID is supported Although the extended tables are theoretically a completely orthogonal feature to PASID and anything else that *uses* the newly-available bits, some of the early hardware has problems even when all we do is enable them and use only the same bits that were in the old context tables. For now, there's no motivation to support extended tables unless we're going to use PASID support to do SVM. So just don't use them unless PASID support is advertised too. Also add a command-line bailout just in case later chips also have issues. The equivalent problem for PASID support has already been fixed with the upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register"), because the problematic platforms use the old definition of the PASID-capable bit, which is now marked as reserved and meaningless. So with this change, we'll magically start using ECS again only when we see the new hardware advertising "hey, we have PASID support and we actually tested it this time" on bit 40. The VT-d hardware architect has promised that we are not going to have any reason to support ECS *without* PASID any time soon, and he'll make sure he checks with us before changing that. In the future, if hypothetical new features also use new bits in the context tables and can be seen on implementations *without* PASID support, we might need to add their feature bits to the ecs_enabled() macro. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-12 17:15:49 +08:00
if (ecs_enabled(iommu))
addr |= DMA_RTADDR_RTT;
raw_spin_lock_irqsave(&iommu->register_lock, flag);
dmar_writeq(iommu->reg + DMAR_RTADDR_REG, addr);
writel(iommu->gcmd | DMA_GCMD_SRTP, iommu->reg + DMAR_GCMD_REG);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
readl, (sts & DMA_GSTS_RTPS), sts);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
static void iommu_flush_write_buffer(struct intel_iommu *iommu)
{
u32 val;
unsigned long flag;
if (!rwbf_quirk && !cap_rwbf(iommu->cap))
return;
raw_spin_lock_irqsave(&iommu->register_lock, flag);
writel(iommu->gcmd | DMA_GCMD_WBF, iommu->reg + DMAR_GCMD_REG);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
readl, (!(val & DMA_GSTS_WBFS)), val);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
/* return value determine if we need a write buffer flush */
static void __iommu_flush_context(struct intel_iommu *iommu,
u16 did, u16 source_id, u8 function_mask,
u64 type)
{
u64 val = 0;
unsigned long flag;
switch (type) {
case DMA_CCMD_GLOBAL_INVL:
val = DMA_CCMD_GLOBAL_INVL;
break;
case DMA_CCMD_DOMAIN_INVL:
val = DMA_CCMD_DOMAIN_INVL|DMA_CCMD_DID(did);
break;
case DMA_CCMD_DEVICE_INVL:
val = DMA_CCMD_DEVICE_INVL|DMA_CCMD_DID(did)
| DMA_CCMD_SID(source_id) | DMA_CCMD_FM(function_mask);
break;
default:
BUG();
}
val |= DMA_CCMD_ICC;
raw_spin_lock_irqsave(&iommu->register_lock, flag);
dmar_writeq(iommu->reg + DMAR_CCMD_REG, val);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, DMAR_CCMD_REG,
dmar_readq, (!(val & DMA_CCMD_ICC)), val);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
/* return value determine if we need a write buffer flush */
static void __iommu_flush_iotlb(struct intel_iommu *iommu, u16 did,
u64 addr, unsigned int size_order, u64 type)
{
int tlb_offset = ecap_iotlb_offset(iommu->ecap);
u64 val = 0, val_iva = 0;
unsigned long flag;
switch (type) {
case DMA_TLB_GLOBAL_FLUSH:
/* global flush doesn't need set IVA_REG */
val = DMA_TLB_GLOBAL_FLUSH|DMA_TLB_IVT;
break;
case DMA_TLB_DSI_FLUSH:
val = DMA_TLB_DSI_FLUSH|DMA_TLB_IVT|DMA_TLB_DID(did);
break;
case DMA_TLB_PSI_FLUSH:
val = DMA_TLB_PSI_FLUSH|DMA_TLB_IVT|DMA_TLB_DID(did);
/* IH bit is passed in as part of address */
val_iva = size_order | addr;
break;
default:
BUG();
}
/* Note: set drain read/write */
#if 0
/*
* This is probably to be super secure.. Looks like we can
* ignore it without any impact.
*/
if (cap_read_drain(iommu->cap))
val |= DMA_TLB_READ_DRAIN;
#endif
if (cap_write_drain(iommu->cap))
val |= DMA_TLB_WRITE_DRAIN;
raw_spin_lock_irqsave(&iommu->register_lock, flag);
/* Note: Only uses first TLB reg currently */
if (val_iva)
dmar_writeq(iommu->reg + tlb_offset, val_iva);
dmar_writeq(iommu->reg + tlb_offset + 8, val);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, tlb_offset + 8,
dmar_readq, (!(val & DMA_TLB_IVT)), val);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
/* check IOTLB invalidation granularity */
if (DMA_TLB_IAIG(val) == 0)
pr_err("Flush IOTLB failed\n");
if (DMA_TLB_IAIG(val) != DMA_TLB_IIRG(type))
pr_debug("TLB flush request %Lx, actual %Lx\n",
(unsigned long long)DMA_TLB_IIRG(type),
(unsigned long long)DMA_TLB_IAIG(val));
}
static struct device_domain_info *
iommu_support_dev_iotlb (struct dmar_domain *domain, struct intel_iommu *iommu,
u8 bus, u8 devfn)
{
struct device_domain_info *info;
assert_spin_locked(&device_domain_lock);
if (!iommu->qi)
return NULL;
list_for_each_entry(info, &domain->devices, link)
if (info->iommu == iommu && info->bus == bus &&
info->devfn == devfn) {
if (info->ats_supported && info->dev)
return info;
break;
}
return NULL;
}
static void domain_update_iotlb(struct dmar_domain *domain)
{
struct device_domain_info *info;
bool has_iotlb_device = false;
assert_spin_locked(&device_domain_lock);
list_for_each_entry(info, &domain->devices, link) {
struct pci_dev *pdev;
if (!info->dev || !dev_is_pci(info->dev))
continue;
pdev = to_pci_dev(info->dev);
if (pdev->ats_enabled) {
has_iotlb_device = true;
break;
}
}
domain->has_iotlb_device = has_iotlb_device;
}
static void iommu_enable_dev_iotlb(struct device_domain_info *info)
{
struct pci_dev *pdev;
assert_spin_locked(&device_domain_lock);
if (!info || !dev_is_pci(info->dev))
return;
pdev = to_pci_dev(info->dev);
#ifdef CONFIG_INTEL_IOMMU_SVM
/* The PCIe spec, in its wisdom, declares that the behaviour of
the device if you enable PASID support after ATS support is
undefined. So always enable PASID support on devices which
have it, even if we can't yet know if we're ever going to
use it. */
if (info->pasid_supported && !pci_enable_pasid(pdev, info->pasid_supported & ~1))
info->pasid_enabled = 1;
if (info->pri_supported && !pci_reset_pri(pdev) && !pci_enable_pri(pdev, 32))
info->pri_enabled = 1;
#endif
if (info->ats_supported && !pci_enable_ats(pdev, VTD_PAGE_SHIFT)) {
info->ats_enabled = 1;
domain_update_iotlb(info->domain);
info->ats_qdep = pci_ats_queue_depth(pdev);
}
}
static void iommu_disable_dev_iotlb(struct device_domain_info *info)
{
struct pci_dev *pdev;
assert_spin_locked(&device_domain_lock);
if (!dev_is_pci(info->dev))
return;
pdev = to_pci_dev(info->dev);
if (info->ats_enabled) {
pci_disable_ats(pdev);
info->ats_enabled = 0;
domain_update_iotlb(info->domain);
}
#ifdef CONFIG_INTEL_IOMMU_SVM
if (info->pri_enabled) {
pci_disable_pri(pdev);
info->pri_enabled = 0;
}
if (info->pasid_enabled) {
pci_disable_pasid(pdev);
info->pasid_enabled = 0;
}
#endif
}
static void iommu_flush_dev_iotlb(struct dmar_domain *domain,
u64 addr, unsigned mask)
{
u16 sid, qdep;
unsigned long flags;
struct device_domain_info *info;
if (!domain->has_iotlb_device)
return;
spin_lock_irqsave(&device_domain_lock, flags);
list_for_each_entry(info, &domain->devices, link) {
if (!info->ats_enabled)
continue;
sid = info->bus << 8 | info->devfn;
qdep = info->ats_qdep;
qi_flush_dev_iotlb(info->iommu, sid, qdep, addr, mask);
}
spin_unlock_irqrestore(&device_domain_lock, flags);
}
static void iommu_flush_iotlb_psi(struct intel_iommu *iommu,
struct dmar_domain *domain,
unsigned long pfn, unsigned int pages,
int ih, int map)
{
unsigned int mask = ilog2(__roundup_pow_of_two(pages));
uint64_t addr = (uint64_t)pfn << VTD_PAGE_SHIFT;
u16 did = domain->iommu_did[iommu->seq_id];
BUG_ON(pages == 0);
if (ih)
ih = 1 << 6;
/*
* Fallback to domain selective flush if no PSI support or the size is
* too big.
* PSI requires page size to be 2 ^ x, and the base address is naturally
* aligned to the size
*/
if (!cap_pgsel_inv(iommu->cap) || mask > cap_max_amask_val(iommu->cap))
iommu->flush.flush_iotlb(iommu, did, 0, 0,
DMA_TLB_DSI_FLUSH);
else
iommu->flush.flush_iotlb(iommu, did, addr | ih, mask,
DMA_TLB_PSI_FLUSH);
/*
* In caching mode, changes of pages from non-present to present require
* flush. However, device IOTLB doesn't need to be flushed in this case.
*/
if (!cap_caching_mode(iommu->cap) || !map)
iommu_flush_dev_iotlb(get_iommu_domain(iommu, did),
addr, mask);
}
static void iommu_disable_protect_mem_regions(struct intel_iommu *iommu)
{
u32 pmen;
unsigned long flags;
raw_spin_lock_irqsave(&iommu->register_lock, flags);
pmen = readl(iommu->reg + DMAR_PMEN_REG);
pmen &= ~DMA_PMEN_EPM;
writel(pmen, iommu->reg + DMAR_PMEN_REG);
/* wait for the protected region status bit to clear */
IOMMU_WAIT_OP(iommu, DMAR_PMEN_REG,
readl, !(pmen & DMA_PMEN_PRS), pmen);
raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
}
static void iommu_enable_translation(struct intel_iommu *iommu)
{
u32 sts;
unsigned long flags;
raw_spin_lock_irqsave(&iommu->register_lock, flags);
iommu->gcmd |= DMA_GCMD_TE;
writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
readl, (sts & DMA_GSTS_TES), sts);
raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
}
static void iommu_disable_translation(struct intel_iommu *iommu)
{
u32 sts;
unsigned long flag;
raw_spin_lock_irqsave(&iommu->register_lock, flag);
iommu->gcmd &= ~DMA_GCMD_TE;
writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
/* Make sure hardware complete it */
IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
readl, (!(sts & DMA_GSTS_TES)), sts);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
static int iommu_init_domains(struct intel_iommu *iommu)
{
u32 ndomains, nlongs;
size_t size;
ndomains = cap_ndoms(iommu->cap);
pr_debug("%s: Number of Domains supported <%d>\n",
iommu->name, ndomains);
nlongs = BITS_TO_LONGS(ndomains);
spin_lock_init(&iommu->lock);
iommu->domain_ids = kcalloc(nlongs, sizeof(unsigned long), GFP_KERNEL);
if (!iommu->domain_ids) {
pr_err("%s: Allocating domain id array failed\n",
iommu->name);
return -ENOMEM;
}
size = (ALIGN(ndomains, 256) >> 8) * sizeof(struct dmar_domain **);
iommu->domains = kzalloc(size, GFP_KERNEL);
if (iommu->domains) {
size = 256 * sizeof(struct dmar_domain *);
iommu->domains[0] = kzalloc(size, GFP_KERNEL);
}
if (!iommu->domains || !iommu->domains[0]) {
pr_err("%s: Allocating domain array failed\n",
iommu->name);
kfree(iommu->domain_ids);
kfree(iommu->domains);
iommu->domain_ids = NULL;
iommu->domains = NULL;
return -ENOMEM;
}
/*
* If Caching mode is set, then invalid translations are tagged
* with domain-id 0, hence we need to pre-allocate it. We also
* use domain-id 0 as a marker for non-allocated domain-id, so
* make sure it is not used for a real domain.
*/
set_bit(0, iommu->domain_ids);
return 0;
}
static void disable_dmar_iommu(struct intel_iommu *iommu)
{
struct device_domain_info *info, *tmp;
unsigned long flags;
if (!iommu->domains || !iommu->domain_ids)
return;
iommu/vt-d: Check for NULL pointer when freeing IOMMU data structure Domain id 0 will be assigned to invalid translation without allocating domain data structure if DMAR unit supports caching mode. So in function free_dmar_iommu(), we should check whether the domain pointer is NULL, otherwise it will cause system crash as below: [ 6.790519] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 [ 6.799520] IP: [<ffffffff810e2dc8>] __lock_acquire+0x11f8/0x1430 [ 6.806493] PGD 0 [ 6.817972] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.823303] Modules linked in: [ 6.826862] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #126 [ 6.834252] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.845951] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.854437] RIP: 0010:[<ffffffff810e2dc8>] [<ffffffff810e2dc8>] __lock_acquire+0x11f8/0x1430 [ 6.864154] RSP: 0000:ffff880455a89ce0 EFLAGS: 00010046 [ 6.870179] RAX: 0000000000000046 RBX: 0000000000000002 RCX: 0000000000000000 [ 6.878249] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000000000c8 [ 6.886318] RBP: ffff880455a89d40 R08: 0000000000000002 R09: 0000000000000001 [ 6.894387] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880455a80000 [ 6.902458] R13: 0000000000000000 R14: 00000000000000c8 R15: 0000000000000000 [ 6.910520] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.919687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.926198] CR2: 00000000000000c8 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.934269] Stack: [ 6.936588] ffffffffffffff10 ffffffff810f59db 0000000000000010 0000000000000246 [ 6.945219] ffff880455a89d10 0000000000000000 ffffffff82bcb980 0000000000000046 [ 6.953850] 0000000000000000 0000000000000000 0000000000000002 0000000000000000 [ 6.962482] Call Trace: [ 6.965300] [<ffffffff810f59db>] ? vprintk_emit+0x4fb/0x5a0 [ 6.971716] [<ffffffff810e3185>] lock_acquire+0x185/0x200 [ 6.977941] [<ffffffff821fbbee>] ? init_dmars+0x839/0xa1d [ 6.984167] [<ffffffff81870b06>] _raw_spin_lock_irqsave+0x56/0x90 [ 6.991158] [<ffffffff821fbbee>] ? init_dmars+0x839/0xa1d [ 6.997380] [<ffffffff821fbbee>] init_dmars+0x839/0xa1d [ 7.003410] [<ffffffff8147d575>] ? pci_get_dev_by_id+0x75/0xd0 [ 7.010119] [<ffffffff821fc146>] intel_iommu_init+0x2f0/0x502 [ 7.016735] [<ffffffff821a7947>] ? iommu_setup+0x27d/0x27d [ 7.023056] [<ffffffff821a796f>] pci_iommu_init+0x28/0x52 [ 7.029282] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.035702] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.041919] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.048919] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.055336] [<ffffffff8184d3f0>] ? rest_init+0x150/0x150 [ 7.061461] [<ffffffff8184d3fe>] kernel_init+0xe/0x100 [ 7.067393] [<ffffffff8187b5fc>] ret_from_fork+0x7c/0xb0 [ 7.073518] [<ffffffff8184d3f0>] ? rest_init+0x150/0x150 [ 7.079642] Code: 01 76 18 89 05 46 04 36 01 41 be 01 00 00 00 e9 2f 02 00 00 0f 1f 80 00 00 00 00 41 be 01 00 00 00 e9 1d 02 00 00 0f 1f 44 00 00 <49> 81 3e c0 31 34 82 b8 01 00 00 00 0f 44 d8 41 83 ff 01 0f 87 [ 7.104944] RIP [<ffffffff810e2dc8>] __lock_acquire+0x11f8/0x1430 [ 7.112008] RSP <ffff880455a89ce0> [ 7.115988] CR2: 00000000000000c8 [ 7.119784] ---[ end trace 13d756f0f462c538 ]--- [ 7.125034] note: swapper/0[1] exited with preempt_count 1 [ 7.131285] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 7.131285] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:30 +08:00
again:
spin_lock_irqsave(&device_domain_lock, flags);
list_for_each_entry_safe(info, tmp, &device_domain_list, global) {
struct dmar_domain *domain;
if (info->iommu != iommu)
continue;
if (!info->dev || !info->domain)
continue;
domain = info->domain;
__dmar_remove_one_dev_info(info);
if (!domain_type_is_vm_or_si(domain)) {
/*
* The domain_exit() function can't be called under
* device_domain_lock, as it takes this lock itself.
* So release the lock here and re-run the loop
* afterwards.
*/
spin_unlock_irqrestore(&device_domain_lock, flags);
domain_exit(domain);
goto again;
}
}
spin_unlock_irqrestore(&device_domain_lock, flags);
if (iommu->gcmd & DMA_GCMD_TE)
iommu_disable_translation(iommu);
}
static void free_dmar_iommu(struct intel_iommu *iommu)
{
if ((iommu->domains) && (iommu->domain_ids)) {
int elems = ALIGN(cap_ndoms(iommu->cap), 256) >> 8;
int i;
for (i = 0; i < elems; i++)
kfree(iommu->domains[i]);
kfree(iommu->domains);
kfree(iommu->domain_ids);
iommu->domains = NULL;
iommu->domain_ids = NULL;
}
g_iommus[iommu->seq_id] = NULL;
/* free context mapping */
free_context_table(iommu);
#ifdef CONFIG_INTEL_IOMMU_SVM
if (pasid_enabled(iommu)) {
if (ecap_prs(iommu->ecap))
intel_svm_finish_prq(iommu);
intel_svm_free_pasid_tables(iommu);
}
#endif
}
static struct dmar_domain *alloc_domain(int flags)
{
struct dmar_domain *domain;
domain = alloc_domain_mem();
if (!domain)
return NULL;
memset(domain, 0, sizeof(*domain));
domain->nid = -1;
domain->flags = flags;
domain->has_iotlb_device = false;
INIT_LIST_HEAD(&domain->devices);
return domain;
}
/* Must be called with iommu->lock */
static int domain_attach_iommu(struct dmar_domain *domain,
struct intel_iommu *iommu)
{
unsigned long ndomains;
int num;
assert_spin_locked(&device_domain_lock);
assert_spin_locked(&iommu->lock);
domain->iommu_refcnt[iommu->seq_id] += 1;
domain->iommu_count += 1;
if (domain->iommu_refcnt[iommu->seq_id] == 1) {
ndomains = cap_ndoms(iommu->cap);
num = find_first_zero_bit(iommu->domain_ids, ndomains);
if (num >= ndomains) {
pr_err("%s: No free domain ids\n", iommu->name);
domain->iommu_refcnt[iommu->seq_id] -= 1;
domain->iommu_count -= 1;
return -ENOSPC;
}
set_bit(num, iommu->domain_ids);
set_iommu_domain(iommu, num, domain);
domain->iommu_did[iommu->seq_id] = num;
domain->nid = iommu->node;
domain_update_iommu_cap(domain);
}
return 0;
}
static int domain_detach_iommu(struct dmar_domain *domain,
struct intel_iommu *iommu)
{
int num, count = INT_MAX;
assert_spin_locked(&device_domain_lock);
assert_spin_locked(&iommu->lock);
domain->iommu_refcnt[iommu->seq_id] -= 1;
count = --domain->iommu_count;
if (domain->iommu_refcnt[iommu->seq_id] == 0) {
num = domain->iommu_did[iommu->seq_id];
clear_bit(num, iommu->domain_ids);
set_iommu_domain(iommu, num, NULL);
domain_update_iommu_cap(domain);
domain->iommu_did[iommu->seq_id] = 0;
}
return count;
}
static struct iova_domain reserved_iova_list;
static struct lock_class_key reserved_rbtree_key;
static int dmar_init_reserved_ranges(void)
{
struct pci_dev *pdev = NULL;
struct iova *iova;
int i;
init_iova_domain(&reserved_iova_list, VTD_PAGE_SIZE, IOVA_START_PFN,
DMA_32BIT_PFN);
lockdep_set_class(&reserved_iova_list.iova_rbtree_lock,
&reserved_rbtree_key);
/* IOAPIC ranges shouldn't be accessed by DMA */
iova = reserve_iova(&reserved_iova_list, IOVA_PFN(IOAPIC_RANGE_START),
IOVA_PFN(IOAPIC_RANGE_END));
if (!iova) {
pr_err("Reserve IOAPIC range failed\n");
return -ENODEV;
}
/* Reserve all PCI MMIO to avoid peer-to-peer access */
for_each_pci_dev(pdev) {
struct resource *r;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
r = &pdev->resource[i];
if (!r->flags || !(r->flags & IORESOURCE_MEM))
continue;
iova = reserve_iova(&reserved_iova_list,
IOVA_PFN(r->start),
IOVA_PFN(r->end));
if (!iova) {
pr_err("Reserve iova failed\n");
return -ENODEV;
}
}
}
return 0;
}
static void domain_reserve_special_ranges(struct dmar_domain *domain)
{
copy_reserved_iova(&reserved_iova_list, &domain->iovad);
}
static inline int guestwidth_to_adjustwidth(int gaw)
{
int agaw;
int r = (gaw - 12) % 9;
if (r == 0)
agaw = gaw;
else
agaw = gaw + 9 - r;
if (agaw > 64)
agaw = 64;
return agaw;
}
static int domain_init(struct dmar_domain *domain, struct intel_iommu *iommu,
int guest_width)
{
int adjust_width, agaw;
unsigned long sagaw;
init_iova_domain(&domain->iovad, VTD_PAGE_SIZE, IOVA_START_PFN,
DMA_32BIT_PFN);
domain_reserve_special_ranges(domain);
/* calculate AGAW */
if (guest_width > cap_mgaw(iommu->cap))
guest_width = cap_mgaw(iommu->cap);
domain->gaw = guest_width;
adjust_width = guestwidth_to_adjustwidth(guest_width);
agaw = width_to_agaw(adjust_width);
sagaw = cap_sagaw(iommu->cap);
if (!test_bit(agaw, &sagaw)) {
/* hardware doesn't support it, choose a bigger one */
pr_debug("Hardware doesn't support agaw %d\n", agaw);
agaw = find_next_bit(&sagaw, 5, agaw);
if (agaw >= 5)
return -ENODEV;
}
domain->agaw = agaw;
if (ecap_coherent(iommu->ecap))
domain->iommu_coherency = 1;
else
domain->iommu_coherency = 0;
if (ecap_sc_support(iommu->ecap))
domain->iommu_snooping = 1;
else
domain->iommu_snooping = 0;
if (intel_iommu_superpage)
domain->iommu_superpage = fls(cap_super_page_val(iommu->cap));
else
domain->iommu_superpage = 0;
domain->nid = iommu->node;
/* always allocate the top pgd */
domain->pgd = (struct dma_pte *)alloc_pgtable_page(domain->nid);
if (!domain->pgd)
return -ENOMEM;
__iommu_flush_cache(iommu, domain->pgd, PAGE_SIZE);
return 0;
}
static void domain_exit(struct dmar_domain *domain)
{
struct page *freelist = NULL;
/* Domain 0 is reserved, so dont process it */
if (!domain)
return;
/* Flush any lazy unmaps that may reference this domain */
if (!intel_iommu_strict) {
int cpu;
for_each_possible_cpu(cpu)
flush_unmaps_timeout(cpu);
}
/* Remove associated devices and clear attached or cached domains */
rcu_read_lock();
domain_remove_dev_info(domain);
rcu_read_unlock();
/* destroy iovas */
put_iova_domain(&domain->iovad);
freelist = domain_unmap(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
dma_free_pagelist(freelist);
free_domain_mem(domain);
}
static int domain_context_mapping_one(struct dmar_domain *domain,
struct intel_iommu *iommu,
u8 bus, u8 devfn)
{
u16 did = domain->iommu_did[iommu->seq_id];
int translation = CONTEXT_TT_MULTI_LEVEL;
struct device_domain_info *info = NULL;
struct context_entry *context;
unsigned long flags;
struct dma_pte *pgd;
int ret, agaw;
WARN_ON(did == 0);
if (hw_pass_through && domain_type_is_si(domain))
translation = CONTEXT_TT_PASS_THROUGH;
pr_debug("Set context mapping for %02x:%02x.%d\n",
bus, PCI_SLOT(devfn), PCI_FUNC(devfn));
BUG_ON(!domain->pgd);
spin_lock_irqsave(&device_domain_lock, flags);
spin_lock(&iommu->lock);
ret = -ENOMEM;
context = iommu_context_addr(iommu, bus, devfn, 1);
if (!context)
goto out_unlock;
ret = 0;
if (context_present(context))
goto out_unlock;
iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped We met the DMAR fault both on hpsa P420i and P421 SmartArray controllers under kdump, it can be steadily reproduced on several different machines, the dmesg log is like: HP HPSA Driver (v 3.4.16-0) hpsa 0000:02:00.0: using doorbell to reset controller hpsa 0000:02:00.0: board ready after hard reset. hpsa 0000:02:00.0: Waiting for controller to respond to no-op DMAR: Setting identity map for device 0000:02:00.0 [0xe8000 - 0xe8fff] DMAR: Setting identity map for device 0000:02:00.0 [0xf4000 - 0xf4fff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6e000 - 0xbdf6efff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6f000 - 0xbdf7efff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf7f000 - 0xbdf82fff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf83000 - 0xbdf84fff] DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read] Request device [02:00.0] fault addr fffff000 [fault reason 06] PTE Read access is not set hpsa 0000:02:00.0: controller message 03:00 timed out hpsa 0000:02:00.0: no-op failed; re-trying After some debugging, we found that the fault addr is from DMA initiated at the driver probe stage after reset(not in-flight DMA), and the corresponding pte entry value is correct, the fault is likely due to the old iommu caches of the in-flight DMA before it. Thus we need to flush the old cache after context mapping is setup for the device, where the device is supposed to finish reset at its driver probe stage and no in-flight DMA exists hereafter. I'm not sure if the hardware is responsible for invalidating all the related caches allocated in the iommu hardware before, but seems not the case for hpsa, actually many device drivers have problems in properly resetting the hardware. Anyway flushing (again) by software in kdump kernel when the device gets context mapped which is a quite infrequent operation does little harm. With this patch, the problematic machine can survive the kdump tests. CC: Myron Stowe <myron.stowe@gmail.com> CC: Joseph Szczypek <jszczype@redhat.com> CC: Don Brace <don.brace@microsemi.com> CC: Baoquan He <bhe@redhat.com> CC: Dave Young <dyoung@redhat.com> Fixes: 091d42e43d21 ("iommu/vt-d: Copy translation tables from old kernel") Fixes: dbcd861f252d ("iommu/vt-d: Do not re-use domain-ids from the old kernel") Fixes: cf484d0e6939 ("iommu/vt-d: Mark copied context entries") Signed-off-by: Xunlei Pang <xlpang@redhat.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-05 20:09:07 +08:00
/*
* For kdump cases, old valid entries may be cached due to the
* in-flight DMA and copied pgtable, but there is no unmapping
* behaviour for them, thus we need an explicit cache flush for
* the newly-mapped device. For kdump, at this point, the device
* is supposed to finish reset at its driver probe stage, so no
* in-flight DMA will exist, and we don't need to worry anymore
* hereafter.
*/
if (context_copied(context)) {
u16 did_old = context_domain_id(context);
if (did_old >= 0 && did_old < cap_ndoms(iommu->cap))
iommu->flush.flush_context(iommu, did_old,
(((u16)bus) << 8) | devfn,
DMA_CCMD_MASK_NOBIT,
DMA_CCMD_DEVICE_INVL);
}
pgd = domain->pgd;
context_clear_entry(context);
context_set_domain_id(context, did);
/*
* Skip top levels of page tables for iommu which has less agaw
* than default. Unnecessary for PT mode.
*/
if (translation != CONTEXT_TT_PASS_THROUGH) {
for (agaw = domain->agaw; agaw != iommu->agaw; agaw--) {
ret = -ENOMEM;
pgd = phys_to_virt(dma_pte_addr(pgd));
if (!dma_pte_present(pgd))
goto out_unlock;
}
info = iommu_support_dev_iotlb(domain, iommu, bus, devfn);
if (info && info->ats_supported)
translation = CONTEXT_TT_DEV_IOTLB;
else
translation = CONTEXT_TT_MULTI_LEVEL;
context_set_address_root(context, virt_to_phys(pgd));
context_set_address_width(context, iommu->agaw);
} else {
/*
* In pass through mode, AW must be programmed to
* indicate the largest AGAW value supported by
* hardware. And ASR is ignored by hardware.
*/
context_set_address_width(context, iommu->msagaw);
}
context_set_translation_type(context, translation);
context_set_fault_enable(context);
context_set_present(context);
domain_flush_cache(domain, context, sizeof(*context));
/*
* It's a non-present to present mapping. If hardware doesn't cache
* non-present entry we only need to flush the write-buffer. If the
* _does_ cache non-present entries, then it does so in the special
* domain #0, which we have to flush:
*/
if (cap_caching_mode(iommu->cap)) {
iommu->flush.flush_context(iommu, 0,
(((u16)bus) << 8) | devfn,
DMA_CCMD_MASK_NOBIT,
DMA_CCMD_DEVICE_INVL);
iommu->flush.flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH);
} else {
iommu_flush_write_buffer(iommu);
}
iommu_enable_dev_iotlb(info);
ret = 0;
out_unlock:
spin_unlock(&iommu->lock);
spin_unlock_irqrestore(&device_domain_lock, flags);
return ret;
}
struct domain_context_mapping_data {
struct dmar_domain *domain;
struct intel_iommu *iommu;
};
static int domain_context_mapping_cb(struct pci_dev *pdev,
u16 alias, void *opaque)
{
struct domain_context_mapping_data *data = opaque;
return domain_context_mapping_one(data->domain, data->iommu,
PCI_BUS_NUM(alias), alias & 0xff);
}
static int
domain_context_mapping(struct dmar_domain *domain, struct device *dev)
{
struct intel_iommu *iommu;
u8 bus, devfn;
struct domain_context_mapping_data data;
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return -ENODEV;
if (!dev_is_pci(dev))
return domain_context_mapping_one(domain, iommu, bus, devfn);
data.domain = domain;
data.iommu = iommu;
return pci_for_each_dma_alias(to_pci_dev(dev),
&domain_context_mapping_cb, &data);
}
static int domain_context_mapped_cb(struct pci_dev *pdev,
u16 alias, void *opaque)
{
struct intel_iommu *iommu = opaque;
return !device_context_mapped(iommu, PCI_BUS_NUM(alias), alias & 0xff);
}
static int domain_context_mapped(struct device *dev)
{
struct intel_iommu *iommu;
u8 bus, devfn;
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return -ENODEV;
if (!dev_is_pci(dev))
return device_context_mapped(iommu, bus, devfn);
return !pci_for_each_dma_alias(to_pci_dev(dev),
domain_context_mapped_cb, iommu);
}
/* Returns a number of VTD pages, but aligned to MM page size */
static inline unsigned long aligned_nrpages(unsigned long host_addr,
size_t size)
{
host_addr &= ~PAGE_MASK;
return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT;
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
/* Return largest possible superpage level for a given mapping */
static inline int hardware_largepage_caps(struct dmar_domain *domain,
unsigned long iov_pfn,
unsigned long phy_pfn,
unsigned long pages)
{
int support, level = 1;
unsigned long pfnmerge;
support = domain->iommu_superpage;
/* To use a large page, the virtual *and* physical addresses
must be aligned to 2MiB/1GiB/etc. Lower bits set in either
of them will mean we have to use smaller pages. So just
merge them and check both at once. */
pfnmerge = iov_pfn | phy_pfn;
while (support && !(pfnmerge & ~VTD_STRIDE_MASK)) {
pages >>= VTD_STRIDE_SHIFT;
if (!pages)
break;
pfnmerge >>= VTD_STRIDE_SHIFT;
level++;
support--;
}
return level;
}
static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
struct scatterlist *sg, unsigned long phys_pfn,
unsigned long nr_pages, int prot)
{
struct dma_pte *first_pte = NULL, *pte = NULL;
phys_addr_t uninitialized_var(pteval);
unsigned long sg_res = 0;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
unsigned int largepage_lvl = 0;
unsigned long lvl_pages = 0;
BUG_ON(!domain_pfn_supported(domain, iov_pfn + nr_pages - 1));
if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0)
return -EINVAL;
prot &= DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP;
if (!sg) {
sg_res = nr_pages;
pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | prot;
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
while (nr_pages > 0) {
uint64_t tmp;
if (!sg_res) {
sg_res = aligned_nrpages(sg->offset, sg->length);
sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset;
sg->dma_length = sg->length;
pteval = page_to_phys(sg_page(sg)) | prot;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
phys_pfn = pteval >> VTD_PAGE_SHIFT;
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
if (!pte) {
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
largepage_lvl = hardware_largepage_caps(domain, iov_pfn, phys_pfn, sg_res);
first_pte = pte = pfn_to_dma_pte(domain, iov_pfn, &largepage_lvl);
if (!pte)
return -ENOMEM;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
/* It is large page*/
if (largepage_lvl > 1) {
unsigned long nr_superpages, end_pfn;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
pteval |= DMA_PTE_LARGE_PAGE;
lvl_pages = lvl_to_nr_pages(largepage_lvl);
nr_superpages = sg_res / lvl_pages;
end_pfn = iov_pfn + nr_superpages * lvl_pages - 1;
/*
* Ensure that old small page tables are
* removed to make room for superpage(s).
*/
dma_pte_free_pagetable(domain, iov_pfn, end_pfn);
} else {
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
pteval &= ~(uint64_t)DMA_PTE_LARGE_PAGE;
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
}
/* We don't need lock here, nobody else
* touches the iova range
*/
tmp = cmpxchg64_local(&pte->val, 0ULL, pteval);
if (tmp) {
static int dumps = 5;
pr_crit("ERROR: DMA PTE for vPFN 0x%lx already set (to %llx not %llx)\n",
iov_pfn, tmp, (unsigned long long)pteval);
if (dumps) {
dumps--;
debug_dma_dump_mappings(NULL);
}
WARN_ON(1);
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
lvl_pages = lvl_to_nr_pages(largepage_lvl);
BUG_ON(nr_pages < lvl_pages);
BUG_ON(sg_res < lvl_pages);
nr_pages -= lvl_pages;
iov_pfn += lvl_pages;
phys_pfn += lvl_pages;
pteval += lvl_pages * VTD_PAGE_SIZE;
sg_res -= lvl_pages;
/* If the next PTE would be the first in a new page, then we
need to flush the cache on the entries we've just written.
And then we'll need to recalculate 'pte', so clear it and
let it get set again in the if (!pte) block above.
If we're done (!nr_pages) we need to flush the cache too.
Also if we've been setting superpages, we may need to
recalculate 'pte' and switch back to smaller pages for the
end of the mapping, if the trailing size is not enough to
use another superpage (i.e. sg_res < lvl_pages). */
pte++;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
if (!nr_pages || first_pte_in_page(pte) ||
(largepage_lvl > 1 && sg_res < lvl_pages)) {
domain_flush_cache(domain, first_pte,
(void *)pte - (void *)first_pte);
pte = NULL;
}
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
if (!sg_res && nr_pages)
sg = sg_next(sg);
}
return 0;
}
static inline int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
struct scatterlist *sg, unsigned long nr_pages,
int prot)
{
return __domain_mapping(domain, iov_pfn, sg, 0, nr_pages, prot);
}
static inline int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
unsigned long phys_pfn, unsigned long nr_pages,
int prot)
{
return __domain_mapping(domain, iov_pfn, NULL, phys_pfn, nr_pages, prot);
}
static void domain_context_clear_one(struct intel_iommu *iommu, u8 bus, u8 devfn)
{
if (!iommu)
return;
clear_context_table(iommu, bus, devfn);
iommu->flush.flush_context(iommu, 0, 0, 0,
DMA_CCMD_GLOBAL_INVL);
iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
}
static inline void unlink_domain_info(struct device_domain_info *info)
{
assert_spin_locked(&device_domain_lock);
list_del(&info->link);
list_del(&info->global);
if (info->dev)
info->dev->archdata.iommu = NULL;
}
static void domain_remove_dev_info(struct dmar_domain *domain)
{
struct device_domain_info *info, *tmp;
unsigned long flags;
spin_lock_irqsave(&device_domain_lock, flags);
list_for_each_entry_safe(info, tmp, &domain->devices, link)
__dmar_remove_one_dev_info(info);
spin_unlock_irqrestore(&device_domain_lock, flags);
}
/*
* find_domain
* Note: we use struct device->archdata.iommu stores the info
*/
static struct dmar_domain *find_domain(struct device *dev)
{
struct device_domain_info *info;
/* No lock here, assumes no domain exit in normal case */
info = dev->archdata.iommu;
if (info)
return info->domain;
return NULL;
}
static inline struct device_domain_info *
dmar_search_domain_by_dev_info(int segment, int bus, int devfn)
{
struct device_domain_info *info;
list_for_each_entry(info, &device_domain_list, global)
if (info->iommu->segment == segment && info->bus == bus &&
info->devfn == devfn)
return info;
return NULL;
}
static struct dmar_domain *dmar_insert_one_dev_info(struct intel_iommu *iommu,
int bus, int devfn,
struct device *dev,
struct dmar_domain *domain)
{
struct dmar_domain *found = NULL;
struct device_domain_info *info;
unsigned long flags;
int ret;
info = alloc_devinfo_mem();
if (!info)
return NULL;
info->bus = bus;
info->devfn = devfn;
info->ats_supported = info->pasid_supported = info->pri_supported = 0;
info->ats_enabled = info->pasid_enabled = info->pri_enabled = 0;
info->ats_qdep = 0;
info->dev = dev;
info->domain = domain;
info->iommu = iommu;
if (dev && dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(info->dev);
if (ecap_dev_iotlb_support(iommu->ecap) &&
pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ATS) &&
dmar_find_matched_atsr_unit(pdev))
info->ats_supported = 1;
if (ecs_enabled(iommu)) {
if (pasid_enabled(iommu)) {
int features = pci_pasid_features(pdev);
if (features >= 0)
info->pasid_supported = features | 1;
}
if (info->ats_supported && ecap_prs(iommu->ecap) &&
pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI))
info->pri_supported = 1;
}
}
spin_lock_irqsave(&device_domain_lock, flags);
if (dev)
found = find_domain(dev);
if (!found) {
struct device_domain_info *info2;
info2 = dmar_search_domain_by_dev_info(iommu->segment, bus, devfn);
if (info2) {
found = info2->domain;
info2->dev = dev;
}
}
if (found) {
spin_unlock_irqrestore(&device_domain_lock, flags);
free_devinfo_mem(info);
/* Caller must free the original domain */
return found;
}
spin_lock(&iommu->lock);
ret = domain_attach_iommu(domain, iommu);
spin_unlock(&iommu->lock);
if (ret) {
spin_unlock_irqrestore(&device_domain_lock, flags);
free_devinfo_mem(info);
return NULL;
}
list_add(&info->link, &domain->devices);
list_add(&info->global, &device_domain_list);
if (dev)
dev->archdata.iommu = info;
spin_unlock_irqrestore(&device_domain_lock, flags);
if (dev && domain_context_mapping(domain, dev)) {
pr_err("Domain context map for %s failed\n", dev_name(dev));
dmar_remove_one_dev_info(domain, dev);
return NULL;
}
return domain;
}
static int get_last_alias(struct pci_dev *pdev, u16 alias, void *opaque)
{
*(u16 *)opaque = alias;
return 0;
}
static struct dmar_domain *find_or_alloc_domain(struct device *dev, int gaw)
{
struct device_domain_info *info = NULL;
struct dmar_domain *domain = NULL;
struct intel_iommu *iommu;
u16 req_id, dma_alias;
unsigned long flags;
u8 bus, devfn;
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return NULL;
req_id = ((u16)bus << 8) | devfn;
if (dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(dev);
pci_for_each_dma_alias(pdev, get_last_alias, &dma_alias);
spin_lock_irqsave(&device_domain_lock, flags);
info = dmar_search_domain_by_dev_info(pci_domain_nr(pdev->bus),
PCI_BUS_NUM(dma_alias),
dma_alias & 0xff);
if (info) {
iommu = info->iommu;
domain = info->domain;
}
spin_unlock_irqrestore(&device_domain_lock, flags);
/* DMA alias already has a domain, use it */
if (info)
goto out;
}
/* Allocate and initialize new domain for the device */
domain = alloc_domain(0);
if (!domain)
return NULL;
if (domain_init(domain, iommu, gaw)) {
domain_exit(domain);
return NULL;
}
out:
return domain;
}
static struct dmar_domain *set_domain_for_dev(struct device *dev,
struct dmar_domain *domain)
{
struct intel_iommu *iommu;
struct dmar_domain *tmp;
u16 req_id, dma_alias;
u8 bus, devfn;
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return NULL;
req_id = ((u16)bus << 8) | devfn;
if (dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(dev);
pci_for_each_dma_alias(pdev, get_last_alias, &dma_alias);
/* register PCI DMA alias device */
if (req_id != dma_alias) {
tmp = dmar_insert_one_dev_info(iommu, PCI_BUS_NUM(dma_alias),
dma_alias & 0xff, NULL, domain);
if (!tmp || tmp != domain)
return tmp;
}
}
tmp = dmar_insert_one_dev_info(iommu, bus, devfn, dev, domain);
if (!tmp || tmp != domain)
return tmp;
return domain;
}
static struct dmar_domain *get_domain_for_dev(struct device *dev, int gaw)
{
struct dmar_domain *domain, *tmp;
domain = find_domain(dev);
if (domain)
goto out;
domain = find_or_alloc_domain(dev, gaw);
if (!domain)
goto out;
tmp = set_domain_for_dev(dev, domain);
if (!tmp || domain != tmp) {
domain_exit(domain);
domain = tmp;
}
out:
return domain;
}
static int iommu_domain_identity_map(struct dmar_domain *domain,
unsigned long long start,
unsigned long long end)
{
unsigned long first_vpfn = start >> VTD_PAGE_SHIFT;
unsigned long last_vpfn = end >> VTD_PAGE_SHIFT;
if (!reserve_iova(&domain->iovad, dma_to_mm_pfn(first_vpfn),
dma_to_mm_pfn(last_vpfn))) {
pr_err("Reserving iova failed\n");
return -ENOMEM;
}
pr_debug("Mapping reserved region %llx-%llx\n", start, end);
/*
* RMRR range might have overlap with physical memory range,
* clear it first
*/
dma_pte_clear_range(domain, first_vpfn, last_vpfn);
return domain_pfn_mapping(domain, first_vpfn, first_vpfn,
last_vpfn - first_vpfn + 1,
DMA_PTE_READ|DMA_PTE_WRITE);
}
static int domain_prepare_identity_map(struct device *dev,
struct dmar_domain *domain,
unsigned long long start,
unsigned long long end)
{
/* For _hardware_ passthrough, don't bother. But for software
passthrough, we do it anyway -- it may indicate a memory
range which is reserved in E820, so which didn't get set
up to start with in si_domain */
if (domain == si_domain && hw_pass_through) {
pr_warn("Ignoring identity map for HW passthrough device %s [0x%Lx - 0x%Lx]\n",
dev_name(dev), start, end);
return 0;
}
pr_info("Setting identity map for device %s [0x%Lx - 0x%Lx]\n",
dev_name(dev), start, end);
if (end < start) {
WARN(1, "Your BIOS is broken; RMRR ends before it starts!\n"
"BIOS vendor: %s; Ver: %s; Product Version: %s\n",
dmi_get_system_info(DMI_BIOS_VENDOR),
dmi_get_system_info(DMI_BIOS_VERSION),
dmi_get_system_info(DMI_PRODUCT_VERSION));
return -EIO;
}
if (end >> agaw_to_width(domain->agaw)) {
WARN(1, "Your BIOS is broken; RMRR exceeds permitted address width (%d bits)\n"
"BIOS vendor: %s; Ver: %s; Product Version: %s\n",
agaw_to_width(domain->agaw),
dmi_get_system_info(DMI_BIOS_VENDOR),
dmi_get_system_info(DMI_BIOS_VERSION),
dmi_get_system_info(DMI_PRODUCT_VERSION));
return -EIO;
}
return iommu_domain_identity_map(domain, start, end);
}
static int iommu_prepare_identity_map(struct device *dev,
unsigned long long start,
unsigned long long end)
{
struct dmar_domain *domain;
int ret;
domain = get_domain_for_dev(dev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
if (!domain)
return -ENOMEM;
ret = domain_prepare_identity_map(dev, domain, start, end);
if (ret)
domain_exit(domain);
return ret;
}
static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr,
struct device *dev)
{
if (dev->archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO)
return 0;
return iommu_prepare_identity_map(dev, rmrr->base_address,
rmrr->end_address);
}
#ifdef CONFIG_INTEL_IOMMU_FLOPPY_WA
static inline void iommu_prepare_isa(void)
{
struct pci_dev *pdev;
int ret;
pdev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
if (!pdev)
return;
pr_info("Prepare 0-16MiB unity mapping for LPC\n");
ret = iommu_prepare_identity_map(&pdev->dev, 0, 16*1024*1024 - 1);
if (ret)
pr_err("Failed to create 0-16MiB identity map - floppy might not work\n");
pci_dev_put(pdev);
}
#else
static inline void iommu_prepare_isa(void)
{
return;
}
#endif /* !CONFIG_INTEL_IOMMU_FLPY_WA */
static int md_domain_init(struct dmar_domain *domain, int guest_width);
static int __init si_domain_init(int hw)
{
int nid, ret = 0;
si_domain = alloc_domain(DOMAIN_FLAG_STATIC_IDENTITY);
if (!si_domain)
return -EFAULT;
if (md_domain_init(si_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) {
domain_exit(si_domain);
return -EFAULT;
}
pr_debug("Identity mapping domain allocated\n");
if (hw)
return 0;
for_each_online_node(nid) {
unsigned long start_pfn, end_pfn;
int i;
for_each_mem_pfn_range(i, nid, &start_pfn, &end_pfn, NULL) {
ret = iommu_domain_identity_map(si_domain,
PFN_PHYS(start_pfn), PFN_PHYS(end_pfn));
if (ret)
return ret;
}
}
return 0;
}
static int identity_mapping(struct device *dev)
{
struct device_domain_info *info;
if (likely(!iommu_identity_mapping))
return 0;
info = dev->archdata.iommu;
if (info && info != DUMMY_DEVICE_DOMAIN_INFO)
return (info->domain == si_domain);
return 0;
}
static int domain_add_dev_info(struct dmar_domain *domain, struct device *dev)
{
struct dmar_domain *ndomain;
struct intel_iommu *iommu;
u8 bus, devfn;
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return -ENODEV;
ndomain = dmar_insert_one_dev_info(iommu, bus, devfn, dev, domain);
if (ndomain != domain)
return -EBUSY;
return 0;
}
static bool device_has_rmrr(struct device *dev)
{
struct dmar_rmrr_unit *rmrr;
struct device *tmp;
int i;
rcu_read_lock();
for_each_rmrr_units(rmrr) {
/*
* Return TRUE if this RMRR contains the device that
* is passed in.
*/
for_each_active_dev_scope(rmrr->devices,
rmrr->devices_cnt, i, tmp)
if (tmp == dev) {
rcu_read_unlock();
return true;
}
}
rcu_read_unlock();
return false;
}
/*
* There are a couple cases where we need to restrict the functionality of
* devices associated with RMRRs. The first is when evaluating a device for
* identity mapping because problems exist when devices are moved in and out
* of domains and their respective RMRR information is lost. This means that
* a device with associated RMRRs will never be in a "passthrough" domain.
* The second is use of the device through the IOMMU API. This interface
* expects to have full control of the IOVA space for the device. We cannot
* satisfy both the requirement that RMRR access is maintained and have an
* unencumbered IOVA space. We also have no ability to quiesce the device's
* use of the RMRR space or even inform the IOMMU API user of the restriction.
* We therefore prevent devices associated with an RMRR from participating in
* the IOMMU API, which eliminates them from device assignment.
*
* In both cases we assume that PCI USB devices with RMRRs have them largely
* for historical reasons and that the RMRR space is not actively used post
* boot. This exclusion may change if vendors begin to abuse it.
*
* The same exception is made for graphics devices, with the requirement that
* any use of the RMRR regions will be torn down before assigning the device
* to a guest.
*/
static bool device_is_rmrr_locked(struct device *dev)
{
if (!device_has_rmrr(dev))
return false;
if (dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(dev);
if (IS_USB_DEVICE(pdev) || IS_GFX_DEVICE(pdev))
return false;
}
return true;
}
static int iommu_should_identity_map(struct device *dev, int startup)
{
if (dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(dev);
if (device_is_rmrr_locked(dev))
return 0;
if ((iommu_identity_mapping & IDENTMAP_AZALIA) && IS_AZALIA(pdev))
return 1;
if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev))
return 1;
if (!(iommu_identity_mapping & IDENTMAP_ALL))
return 0;
/*
* We want to start off with all devices in the 1:1 domain, and
* take them out later if we find they can't access all of memory.
*
* However, we can't do this for PCI devices behind bridges,
* because all PCI devices behind the same bridge will end up
* with the same source-id on their transactions.
*
* Practically speaking, we can't change things around for these
* devices at run-time, because we can't be sure there'll be no
* DMA transactions in flight for any of their siblings.
*
* So PCI devices (unless they're on the root bus) as well as
* their parent PCI-PCI or PCIe-PCI bridges must be left _out_ of
* the 1:1 domain, just in _case_ one of their siblings turns out
* not to be able to map all of memory.
*/
if (!pci_is_pcie(pdev)) {
if (!pci_is_root_bus(pdev->bus))
return 0;
if (pdev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
return 0;
} else if (pci_pcie_type(pdev) == PCI_EXP_TYPE_PCI_BRIDGE)
return 0;
} else {
if (device_has_rmrr(dev))
return 0;
}
/*
* At boot time, we don't yet know if devices will be 64-bit capable.
* Assume that they will if they turn out not to be, then we can
* take them out of the 1:1 domain later.
*/
if (!startup) {
/*
* If the device's dma_mask is less than the system's memory
* size then this is not a candidate for identity mapping.
*/
u64 dma_mask = *dev->dma_mask;
if (dev->coherent_dma_mask &&
dev->coherent_dma_mask < dma_mask)
dma_mask = dev->coherent_dma_mask;
return dma_mask >= dma_get_required_mask(dev);
}
return 1;
}
static int __init dev_prepare_static_identity_mapping(struct device *dev, int hw)
{
int ret;
if (!iommu_should_identity_map(dev, 1))
return 0;
ret = domain_add_dev_info(si_domain, dev);
if (!ret)
pr_info("%s identity mapping for device %s\n",
hw ? "Hardware" : "Software", dev_name(dev));
else if (ret == -ENODEV)
/* device not associated with an iommu */
ret = 0;
return ret;
}
static int __init iommu_prepare_static_identity_mapping(int hw)
{
struct pci_dev *pdev = NULL;
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
struct device *dev;
int i;
int ret = 0;
for_each_pci_dev(pdev) {
ret = dev_prepare_static_identity_mapping(&pdev->dev, hw);
if (ret)
return ret;
}
for_each_active_iommu(iommu, drhd)
for_each_active_dev_scope(drhd->devices, drhd->devices_cnt, i, dev) {
struct acpi_device_physical_node *pn;
struct acpi_device *adev;
if (dev->bus != &acpi_bus_type)
continue;
adev= to_acpi_device(dev);
mutex_lock(&adev->physical_node_lock);
list_for_each_entry(pn, &adev->physical_node_list, node) {
ret = dev_prepare_static_identity_mapping(pn->dev, hw);
if (ret)
break;
}
mutex_unlock(&adev->physical_node_lock);
if (ret)
return ret;
}
return 0;
}
static void intel_iommu_init_qi(struct intel_iommu *iommu)
{
/*
* Start from the sane iommu hardware state.
* If the queued invalidation is already initialized by us
* (for example, while enabling interrupt-remapping) then
* we got the things already rolling from a sane state.
*/
if (!iommu->qi) {
/*
* Clear any previous faults.
*/
dmar_fault(-1, iommu);
/*
* Disable queued invalidation if supported and already enabled
* before OS handover.
*/
dmar_disable_qi(iommu);
}
if (dmar_enable_qi(iommu)) {
/*
* Queued Invalidate not enabled, use Register Based Invalidate
*/
iommu->flush.flush_context = __iommu_flush_context;
iommu->flush.flush_iotlb = __iommu_flush_iotlb;
pr_info("%s: Using Register based invalidation\n",
iommu->name);
} else {
iommu->flush.flush_context = qi_flush_context;
iommu->flush.flush_iotlb = qi_flush_iotlb;
pr_info("%s: Using Queued invalidation\n", iommu->name);
}
}
static int copy_context_table(struct intel_iommu *iommu,
struct root_entry *old_re,
struct context_entry **tbl,
int bus, bool ext)
{
int tbl_idx, pos = 0, idx, devfn, ret = 0, did;
struct context_entry *new_ce = NULL, ce;
struct context_entry *old_ce = NULL;
struct root_entry re;
phys_addr_t old_ce_phys;
tbl_idx = ext ? bus * 2 : bus;
memcpy(&re, old_re, sizeof(re));
for (devfn = 0; devfn < 256; devfn++) {
/* First calculate the correct index */
idx = (ext ? devfn * 2 : devfn) % 256;
if (idx == 0) {
/* First save what we may have and clean up */
if (new_ce) {
tbl[tbl_idx] = new_ce;
__iommu_flush_cache(iommu, new_ce,
VTD_PAGE_SIZE);
pos = 1;
}
if (old_ce)
iounmap(old_ce);
ret = 0;
if (devfn < 0x80)
old_ce_phys = root_entry_lctp(&re);
else
old_ce_phys = root_entry_uctp(&re);
if (!old_ce_phys) {
if (ext && devfn == 0) {
/* No LCTP, try UCTP */
devfn = 0x7f;
continue;
} else {
goto out;
}
}
ret = -ENOMEM;
old_ce = memremap(old_ce_phys, PAGE_SIZE,
MEMREMAP_WB);
if (!old_ce)
goto out;
new_ce = alloc_pgtable_page(iommu->node);
if (!new_ce)
goto out_unmap;
ret = 0;
}
/* Now copy the context entry */
memcpy(&ce, old_ce + idx, sizeof(ce));
if (!__context_present(&ce))
continue;
did = context_domain_id(&ce);
if (did >= 0 && did < cap_ndoms(iommu->cap))
set_bit(did, iommu->domain_ids);
/*
* We need a marker for copied context entries. This
* marker needs to work for the old format as well as
* for extended context entries.
*
* Bit 67 of the context entry is used. In the old
* format this bit is available to software, in the
* extended format it is the PGE bit, but PGE is ignored
* by HW if PASIDs are disabled (and thus still
* available).
*
* So disable PASIDs first and then mark the entry
* copied. This means that we don't copy PASID
* translations from the old kernel, but this is fine as
* faults there are not fatal.
*/
context_clear_pasid_enable(&ce);
context_set_copied(&ce);
new_ce[idx] = ce;
}
tbl[tbl_idx + pos] = new_ce;
__iommu_flush_cache(iommu, new_ce, VTD_PAGE_SIZE);
out_unmap:
memunmap(old_ce);
out:
return ret;
}
static int copy_translation_tables(struct intel_iommu *iommu)
{
struct context_entry **ctxt_tbls;
struct root_entry *old_rt;
phys_addr_t old_rt_phys;
int ctxt_table_entries;
unsigned long flags;
u64 rtaddr_reg;
int bus, ret;
bool new_ext, ext;
rtaddr_reg = dmar_readq(iommu->reg + DMAR_RTADDR_REG);
ext = !!(rtaddr_reg & DMA_RTADDR_RTT);
new_ext = !!ecap_ecs(iommu->ecap);
/*
* The RTT bit can only be changed when translation is disabled,
* but disabling translation means to open a window for data
* corruption. So bail out and don't copy anything if we would
* have to change the bit.
*/
if (new_ext != ext)
return -EINVAL;
old_rt_phys = rtaddr_reg & VTD_PAGE_MASK;
if (!old_rt_phys)
return -EINVAL;
old_rt = memremap(old_rt_phys, PAGE_SIZE, MEMREMAP_WB);
if (!old_rt)
return -ENOMEM;
/* This is too big for the stack - allocate it from slab */
ctxt_table_entries = ext ? 512 : 256;
ret = -ENOMEM;
ctxt_tbls = kzalloc(ctxt_table_entries * sizeof(void *), GFP_KERNEL);
if (!ctxt_tbls)
goto out_unmap;
for (bus = 0; bus < 256; bus++) {
ret = copy_context_table(iommu, &old_rt[bus],
ctxt_tbls, bus, ext);
if (ret) {
pr_err("%s: Failed to copy context table for bus %d\n",
iommu->name, bus);
continue;
}
}
spin_lock_irqsave(&iommu->lock, flags);
/* Context tables are copied, now write them to the root_entry table */
for (bus = 0; bus < 256; bus++) {
int idx = ext ? bus * 2 : bus;
u64 val;
if (ctxt_tbls[idx]) {
val = virt_to_phys(ctxt_tbls[idx]) | 1;
iommu->root_entry[bus].lo = val;
}
if (!ext || !ctxt_tbls[idx + 1])
continue;
val = virt_to_phys(ctxt_tbls[idx + 1]) | 1;
iommu->root_entry[bus].hi = val;
}
spin_unlock_irqrestore(&iommu->lock, flags);
kfree(ctxt_tbls);
__iommu_flush_cache(iommu, iommu->root_entry, PAGE_SIZE);
ret = 0;
out_unmap:
memunmap(old_rt);
return ret;
}
static int __init init_dmars(void)
{
struct dmar_drhd_unit *drhd;
struct dmar_rmrr_unit *rmrr;
bool copied_tables = false;
struct device *dev;
struct intel_iommu *iommu;
int i, ret, cpu;
/*
* for each drhd
* allocate root
* initialize and program root entry to not present
* endfor
*/
for_each_drhd_unit(drhd) {
/*
* lock not needed as this is only incremented in the single
* threaded kernel __init code path all other access are read
* only
*/
if (g_num_of_iommus < DMAR_UNITS_SUPPORTED) {
g_num_of_iommus++;
continue;
}
pr_err_once("Exceeded %d IOMMUs\n", DMAR_UNITS_SUPPORTED);
}
/* Preallocate enough resources for IOMMU hot-addition */
if (g_num_of_iommus < DMAR_UNITS_SUPPORTED)
g_num_of_iommus = DMAR_UNITS_SUPPORTED;
g_iommus = kcalloc(g_num_of_iommus, sizeof(struct intel_iommu *),
GFP_KERNEL);
if (!g_iommus) {
pr_err("Allocating global iommu array failed\n");
ret = -ENOMEM;
goto error;
}
for_each_possible_cpu(cpu) {
struct deferred_flush_data *dfd = per_cpu_ptr(&deferred_flush,
cpu);
dfd->tables = kzalloc(g_num_of_iommus *
sizeof(struct deferred_flush_table),
GFP_KERNEL);
if (!dfd->tables) {
ret = -ENOMEM;
goto free_g_iommus;
}
spin_lock_init(&dfd->lock);
setup_timer(&dfd->timer, flush_unmaps_timeout, cpu);
}
for_each_active_iommu(iommu, drhd) {
g_iommus[iommu->seq_id] = iommu;
intel_iommu_init_qi(iommu);
ret = iommu_init_domains(iommu);
if (ret)
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
goto free_iommu;
init_translation_status(iommu);
if (translation_pre_enabled(iommu) && !is_kdump_kernel()) {
iommu_disable_translation(iommu);
clear_translation_pre_enabled(iommu);
pr_warn("Translation was enabled for %s but we are not in kdump mode\n",
iommu->name);
}
/*
* TBD:
* we could share the same root & context tables
* among all IOMMU's. Need to Split it later.
*/
ret = iommu_alloc_root_entry(iommu);
if (ret)
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
goto free_iommu;
if (translation_pre_enabled(iommu)) {
pr_info("Translation already enabled - trying to copy translation structures\n");
ret = copy_translation_tables(iommu);
if (ret) {
/*
* We found the IOMMU with translation
* enabled - but failed to copy over the
* old root-entry table. Try to proceed
* by disabling translation now and
* allocating a clean root-entry table.
* This might cause DMAR faults, but
* probably the dump will still succeed.
*/
pr_err("Failed to copy translation tables from previous kernel for %s\n",
iommu->name);
iommu_disable_translation(iommu);
clear_translation_pre_enabled(iommu);
} else {
pr_info("Copied translation tables from previous kernel for %s\n",
iommu->name);
copied_tables = true;
}
}
if (!ecap_pass_through(iommu->ecap))
hw_pass_through = 0;
#ifdef CONFIG_INTEL_IOMMU_SVM
if (pasid_enabled(iommu))
intel_svm_alloc_pasid_tables(iommu);
#endif
}
/*
* Now that qi is enabled on all iommus, set the root entry and flush
* caches. This is required on some Intel X58 chipsets, otherwise the
* flush_context function will loop forever and the boot hangs.
*/
for_each_active_iommu(iommu, drhd) {
iommu_flush_write_buffer(iommu);
iommu_set_root_entry(iommu);
iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
}
if (iommu_pass_through)
iommu_identity_mapping |= IDENTMAP_ALL;
#ifdef CONFIG_INTEL_IOMMU_BROKEN_GFX_WA
iommu_identity_mapping |= IDENTMAP_GFX;
#endif
check_tylersburg_isoch();
if (iommu_identity_mapping) {
ret = si_domain_init(hw_pass_through);
if (ret)
goto free_iommu;
}
/*
* If we copied translations from a previous kernel in the kdump
* case, we can not assign the devices to domains now, as that
* would eliminate the old mappings. So skip this part and defer
* the assignment to device driver initialization time.
*/
if (copied_tables)
goto domains_done;
/*
* If pass through is not set or not enabled, setup context entries for
* identity mappings for rmrr, gfx, and isa and may fall back to static
* identity mapping if iommu_identity_mapping is set.
*/
if (iommu_identity_mapping) {
ret = iommu_prepare_static_identity_mapping(hw_pass_through);
if (ret) {
pr_crit("Failed to setup IOMMU pass-through\n");
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
goto free_iommu;
}
}
/*
* For each rmrr
* for each dev attached to rmrr
* do
* locate drhd for dev, alloc domain for dev
* allocate free domain
* allocate page table entries for rmrr
* if context not allocated for bus
* allocate and init context
* set present in root table for this bus
* init context with domain, translation etc
* endfor
* endfor
*/
pr_info("Setting RMRR:\n");
for_each_rmrr_units(rmrr) {
/* some BIOS lists non-exist devices in DMAR table. */
for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
i, dev) {
ret = iommu_prepare_rmrr_dev(rmrr, dev);
if (ret)
pr_err("Mapping reserved region failed\n");
}
}
iommu_prepare_isa();
domains_done:
/*
* for each drhd
* enable fault log
* global invalidate context cache
* global invalidate iotlb
* enable translation
*/
for_each_iommu(iommu, drhd) {
if (drhd->ignored) {
/*
* we always have to disable PMRs or DMA may fail on
* this device
*/
if (force_on)
iommu_disable_protect_mem_regions(iommu);
continue;
}
iommu_flush_write_buffer(iommu);
#ifdef CONFIG_INTEL_IOMMU_SVM
if (pasid_enabled(iommu) && ecap_prs(iommu->ecap)) {
ret = intel_svm_enable_prq(iommu);
if (ret)
goto free_iommu;
}
#endif
ret = dmar_set_interrupt(iommu);
if (ret)
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
goto free_iommu;
if (!translation_pre_enabled(iommu))
iommu_enable_translation(iommu);
iommu_disable_protect_mem_regions(iommu);
}
return 0;
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
free_iommu:
for_each_active_iommu(iommu, drhd) {
disable_dmar_iommu(iommu);
iommu/vt-d: keep shared resources when failed to initialize iommu devices Data structure drhd->iommu is shared between DMA remapping driver and interrupt remapping driver, so DMA remapping driver shouldn't release drhd->iommu when it failed to initialize IOMMU devices. Otherwise it may cause invalid memory access to the interrupt remapping driver. Sample stack dump: [ 13.315090] BUG: unable to handle kernel paging request at ffffc9000605a088 [ 13.323221] IP: [<ffffffff81461bac>] qi_submit_sync+0x15c/0x400 [ 13.330107] PGD 82f81e067 PUD c2f81e067 PMD 82e846067 PTE 0 [ 13.336818] Oops: 0002 [#1] SMP [ 13.340757] Modules linked in: [ 13.344422] CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.13.0-rc1-gerry+ #7 [ 13.352474] Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.99.99.x059.091020121352 09/10/2012 [ 13.365659] Workqueue: events work_for_cpu_fn [ 13.370774] task: ffff88042ddf00d0 ti: ffff88042ddee000 task.ti: ffff88042dde e000 [ 13.379389] RIP: 0010:[<ffffffff81461bac>] [<ffffffff81461bac>] qi_submit_sy nc+0x15c/0x400 [ 13.389055] RSP: 0000:ffff88042ddef940 EFLAGS: 00010002 [ 13.395151] RAX: 00000000000005e0 RBX: 0000000000000082 RCX: 0000000200000025 [ 13.403308] RDX: ffffc9000605a000 RSI: 0000000000000010 RDI: ffff88042ddb8610 [ 13.411446] RBP: ffff88042ddef9a0 R08: 00000000000005d0 R09: 0000000000000001 [ 13.419599] R10: 0000000000000000 R11: 000000000000005d R12: 000000000000005c [ 13.427742] R13: ffff88102d84d300 R14: 0000000000000174 R15: ffff88042ddb4800 [ 13.435877] FS: 0000000000000000(0000) GS:ffff88043de00000(0000) knlGS:00000 00000000000 [ 13.445168] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 13.451749] CR2: ffffc9000605a088 CR3: 0000000001a0b000 CR4: 00000000000407f0 [ 13.459895] Stack: [ 13.462297] ffff88042ddb85d0 000000000000005d ffff88042ddef9b0 0000000000000 5d0 [ 13.471147] 00000000000005c0 ffff88042ddb8000 000000000000005c 0000000000000 015 [ 13.480001] ffff88042ddb4800 0000000000000282 ffff88042ddefa40 ffff88042ddef ac0 [ 13.488855] Call Trace: [ 13.491771] [<ffffffff8146848d>] modify_irte+0x9d/0xd0 [ 13.497778] [<ffffffff8146886d>] intel_setup_ioapic_entry+0x10d/0x290 [ 13.505250] [<ffffffff810a92a6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [ 13.512824] [<ffffffff810346b0>] ? default_init_apic_ldr+0x60/0x60 [ 13.519998] [<ffffffff81468be0>] setup_ioapic_remapped_entry+0x20/0x30 [ 13.527566] [<ffffffff8103683a>] io_apic_setup_irq_pin+0x12a/0x2c0 [ 13.534742] [<ffffffff8136673b>] ? acpi_pci_irq_find_prt_entry+0x2b9/0x2d8 [ 13.544102] [<ffffffff81037fd5>] io_apic_setup_irq_pin_once+0x85/0xa0 [ 13.551568] [<ffffffff8103816f>] ? mp_find_ioapic_pin+0x8f/0xf0 [ 13.558434] [<ffffffff81038044>] io_apic_set_pci_routing+0x34/0x70 [ 13.565621] [<ffffffff8102f4cf>] mp_register_gsi+0xaf/0x1c0 [ 13.572111] [<ffffffff8102f5ee>] acpi_register_gsi_ioapic+0xe/0x10 [ 13.579286] [<ffffffff8102f33f>] acpi_register_gsi+0xf/0x20 [ 13.585779] [<ffffffff81366b86>] acpi_pci_irq_enable+0x171/0x1e3 [ 13.592764] [<ffffffff8146d771>] pcibios_enable_device+0x31/0x40 [ 13.599744] [<ffffffff81320e9b>] do_pci_enable_device+0x3b/0x60 [ 13.606633] [<ffffffff81322248>] pci_enable_device_flags+0xc8/0x120 [ 13.613887] [<ffffffff813222f3>] pci_enable_device+0x13/0x20 [ 13.620484] [<ffffffff8132fa7e>] pcie_port_device_register+0x1e/0x510 [ 13.627947] [<ffffffff810a92a6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [ 13.635510] [<ffffffff810a947d>] ? trace_hardirqs_on+0xd/0x10 [ 13.642189] [<ffffffff813302b8>] pcie_portdrv_probe+0x58/0xc0 [ 13.648877] [<ffffffff81323ba5>] local_pci_probe+0x45/0xa0 [ 13.655266] [<ffffffff8106bc44>] work_for_cpu_fn+0x14/0x20 [ 13.661656] [<ffffffff8106fa79>] process_one_work+0x369/0x710 [ 13.668334] [<ffffffff8106fa02>] ? process_one_work+0x2f2/0x710 [ 13.675215] [<ffffffff81071d56>] ? worker_thread+0x46/0x690 [ 13.681714] [<ffffffff81072194>] worker_thread+0x484/0x690 [ 13.688109] [<ffffffff81071d10>] ? cancel_delayed_work_sync+0x20/0x20 [ 13.695576] [<ffffffff81079c60>] kthread+0xf0/0x110 [ 13.701300] [<ffffffff8108e7bf>] ? local_clock+0x3f/0x50 [ 13.707492] [<ffffffff81079b70>] ? kthread_create_on_node+0x250/0x250 [ 13.714959] [<ffffffff81574d2c>] ret_from_fork+0x7c/0xb0 [ 13.721152] [<ffffffff81079b70>] ? kthread_create_on_node+0x250/0x250 Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-01-06 14:18:20 +08:00
free_dmar_iommu(iommu);
}
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
free_g_iommus:
for_each_possible_cpu(cpu)
kfree(per_cpu_ptr(&deferred_flush, cpu)->tables);
kfree(g_iommus);
iommu/vt-d: Avoid double free of g_iommus on error recovery path Array 'g_iommus' may be freed twice on error recovery path in function init_dmars() and free_dmar_iommu(), thus cause random system crash as below. [ 6.774301] IOMMU: dmar init failed [ 6.778310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.785615] software IO TLB [mem 0x76bcf000-0x7abcf000] (64MB) mapped at [ffff880076bcf000-ffff88007abcefff] [ 6.796887] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 6.804173] Modules linked in: [ 6.807731] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #108 [ 6.815122] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014 [ 6.836000] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000 [ 6.844487] RIP: 0010:[<ffffffff8143eea6>] [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 6.853039] RSP: 0000:ffff880455a89cc8 EFLAGS: 00010293 [ 6.859064] RAX: ffff006568636163 RBX: ffff00656863616a RCX: 0000000000000005 [ 6.867134] RDX: 0000000000000005 RSI: ffffffff81cdc439 RDI: ffff006568636163 [ 6.875205] RBP: ffff880455a89d30 R08: 000000000001bc3b R09: 0000000000000000 [ 6.883275] R10: 0000000000000000 R11: ffffffff81cdc43e R12: ffff880455a89da8 [ 6.891338] R13: ffff006568636163 R14: 0000000000000005 R15: ffffffff81cdc439 [ 6.899408] FS: 0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000 [ 6.908575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.915088] CR2: ffff88047e1ff000 CR3: 0000000001e0e000 CR4: 00000000001407f0 [ 6.923160] Stack: [ 6.925487] ffffffff8143c904 ffff88045b407e00 ffff006568636163 ffff006568636163 [ 6.934113] ffffffff8120a1a9 ffffffff81cdc43e 0000000000000007 0000000000000000 [ 6.942747] ffff880455a89da8 ffff006568636163 0000000000000007 ffffffff81cdc439 [ 6.951382] Call Trace: [ 6.954197] [<ffffffff8143c904>] ? vsnprintf+0x124/0x6f0 [ 6.960323] [<ffffffff8120a1a9>] ? __kmalloc_track_caller+0x169/0x360 [ 6.967716] [<ffffffff81440e1b>] kvasprintf+0x6b/0x80 [ 6.973552] [<ffffffff81432bf1>] kobject_set_name_vargs+0x21/0x70 [ 6.980552] [<ffffffff8143393d>] kobject_init_and_add+0x4d/0x90 [ 6.987364] [<ffffffff812067c9>] ? __kmalloc+0x169/0x370 [ 6.993492] [<ffffffff8102dbbc>] ? cache_add_dev+0x17c/0x4f0 [ 7.000005] [<ffffffff8102ddfa>] cache_add_dev+0x3ba/0x4f0 [ 7.006327] [<ffffffff821a87ca>] ? i8237A_init_ops+0x14/0x14 [ 7.012842] [<ffffffff821a87f8>] cache_sysfs_init+0x2e/0x61 [ 7.019260] [<ffffffff81002162>] do_one_initcall+0xf2/0x220 [ 7.025679] [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450 [ 7.031903] [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b [ 7.038904] [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a [ 7.045322] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.051447] [<ffffffff8184d5ee>] kernel_init+0xe/0x100 [ 7.057380] [<ffffffff8187b87c>] ret_from_fork+0x7c/0xb0 [ 7.063503] [<ffffffff8184d5e0>] ? rest_init+0x150/0x150 [ 7.069628] Code: 89 e5 53 48 89 fb 75 16 80 7f 3c 00 75 05 e8 d2 f9 ff ff 48 8b 43 58 48 2b 43 50 88 43 4e 5b 5d c3 90 90 90 90 48 89 f8 48 89 d1 <f3> a4 c3 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 20 4c 8b 06 4c 8b [ 7.094960] RIP [<ffffffff8143eea6>] memcpy+0x6/0x110 [ 7.100856] RSP <ffff880455a89cc8> [ 7.104864] ---[ end trace b5d3fdc6c6c28083 ]--- [ 7.110142] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.110142] [ 7.120540] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:21 +08:00
error:
return ret;
}
/* This takes a number of _MM_ pages, not VTD pages */
static unsigned long intel_alloc_iova(struct device *dev,
struct dmar_domain *domain,
unsigned long nrpages, uint64_t dma_mask)
{
unsigned long iova_pfn = 0;
/* Restrict dma_mask to the width that the iommu can handle */
dma_mask = min_t(uint64_t, DOMAIN_MAX_ADDR(domain->gaw), dma_mask);
/* Ensure we reserve the whole size-aligned region */
nrpages = __roundup_pow_of_two(nrpages);
if (!dmar_forcedac && dma_mask > DMA_BIT_MASK(32)) {
/*
* First try to allocate an io virtual address in
* DMA_BIT_MASK(32) and if that fails then try allocating
* from higher range
*/
iova_pfn = alloc_iova_fast(&domain->iovad, nrpages,
IOVA_PFN(DMA_BIT_MASK(32)));
if (iova_pfn)
return iova_pfn;
}
iova_pfn = alloc_iova_fast(&domain->iovad, nrpages, IOVA_PFN(dma_mask));
if (unlikely(!iova_pfn)) {
pr_err("Allocating %ld-page iova for %s failed",
nrpages, dev_name(dev));
return 0;
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
}
return iova_pfn;
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
}
static struct dmar_domain *__get_valid_domain_for_dev(struct device *dev)
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
{
struct dmar_domain *domain, *tmp;
struct dmar_rmrr_unit *rmrr;
struct device *i_dev;
int i, ret;
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
domain = find_domain(dev);
if (domain)
goto out;
domain = find_or_alloc_domain(dev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
if (!domain)
goto out;
/* We have a new domain - setup possible RMRRs for the device */
rcu_read_lock();
for_each_rmrr_units(rmrr) {
for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
i, i_dev) {
if (i_dev != dev)
continue;
ret = domain_prepare_identity_map(dev, domain,
rmrr->base_address,
rmrr->end_address);
if (ret)
dev_err(dev, "Mapping reserved region failed\n");
}
}
rcu_read_unlock();
tmp = set_domain_for_dev(dev, domain);
if (!tmp || domain != tmp) {
domain_exit(domain);
domain = tmp;
}
out:
if (!domain)
pr_err("Allocating domain for %s failed\n", dev_name(dev));
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
return domain;
}
static inline struct dmar_domain *get_valid_domain_for_dev(struct device *dev)
{
struct device_domain_info *info;
/* No lock here, assumes no domain exit in normal case */
info = dev->archdata.iommu;
if (likely(info))
return info->domain;
return __get_valid_domain_for_dev(dev);
}
/* Check if the dev needs to go through non-identity map and unmap process.*/
static int iommu_no_mapping(struct device *dev)
{
int found;
if (iommu_dummy(dev))
return 1;
if (!iommu_identity_mapping)
return 0;
found = identity_mapping(dev);
if (found) {
if (iommu_should_identity_map(dev, 0))
return 1;
else {
/*
* 32 bit DMA is removed from si_domain and fall back
* to non-identity mapping.
*/
dmar_remove_one_dev_info(si_domain, dev);
pr_info("32bit %s uses non-identity mapping\n",
dev_name(dev));
return 0;
}
} else {
/*
* In case of a detached 64 bit DMA device from vm, the device
* is put into si_domain for identity mapping.
*/
if (iommu_should_identity_map(dev, 0)) {
int ret;
ret = domain_add_dev_info(si_domain, dev);
if (!ret) {
pr_info("64bit %s uses identity mapping\n",
dev_name(dev));
return 1;
}
}
}
return 0;
}
static dma_addr_t __intel_map_single(struct device *dev, phys_addr_t paddr,
size_t size, int dir, u64 dma_mask)
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
{
struct dmar_domain *domain;
phys_addr_t start_paddr;
unsigned long iova_pfn;
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
int prot = 0;
int ret;
struct intel_iommu *iommu;
unsigned long paddr_pfn = paddr >> PAGE_SHIFT;
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
BUG_ON(dir == DMA_NONE);
if (iommu_no_mapping(dev))
return paddr;
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
domain = get_valid_domain_for_dev(dev);
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
if (!domain)
return 0;
iommu = domain_get_iommu(domain);
size = aligned_nrpages(paddr, size);
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
iova_pfn = intel_alloc_iova(dev, domain, dma_to_mm_pfn(size), dma_mask);
if (!iova_pfn)
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
goto error;
/*
* Check if DMAR supports zero-length reads on write only
* mappings..
*/
if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL || \
!cap_zlr(iommu->cap))
prot |= DMA_PTE_READ;
if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
prot |= DMA_PTE_WRITE;
/*
* paddr - (paddr + size) might be partial page, we should map the whole
* page. Note: if two part of one page are separately mapped, we
* might have two guest_addr mapping to the same host paddr, but this
* is not a big problem
*/
ret = domain_pfn_mapping(domain, mm_to_dma_pfn(iova_pfn),
mm_to_dma_pfn(paddr_pfn), size, prot);
if (ret)
goto error;
/* it's a non-present to present mapping. Only flush if caching mode */
if (cap_caching_mode(iommu->cap))
iommu_flush_iotlb_psi(iommu, domain,
mm_to_dma_pfn(iova_pfn),
size, 0, 1);
else
iommu_flush_write_buffer(iommu);
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
start_paddr = (phys_addr_t)iova_pfn << PAGE_SHIFT;
start_paddr += paddr & ~PAGE_MASK;
return start_paddr;
error:
if (iova_pfn)
free_iova_fast(&domain->iovad, iova_pfn, dma_to_mm_pfn(size));
pr_err("Device %s request: %zx@%llx dir %d --- failed\n",
dev_name(dev), size, (unsigned long long)paddr, dir);
return 0;
}
static dma_addr_t intel_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction dir,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:46:00 +08:00
unsigned long attrs)
{
return __intel_map_single(dev, page_to_phys(page) + offset, size,
dir, *dev->dma_mask);
}
static void flush_unmaps(struct deferred_flush_data *flush_data)
{
int i, j;
flush_data->timer_on = 0;
/* just flush them all */
for (i = 0; i < g_num_of_iommus; i++) {
struct intel_iommu *iommu = g_iommus[i];
struct deferred_flush_table *flush_table =
&flush_data->tables[i];
if (!iommu)
continue;
if (!flush_table->next)
continue;
/* In caching mode, global flushes turn emulation expensive */
if (!cap_caching_mode(iommu->cap))
iommu->flush.flush_iotlb(iommu, 0, 0, 0,
DMA_TLB_GLOBAL_FLUSH);
for (j = 0; j < flush_table->next; j++) {
unsigned long mask;
struct deferred_flush_entry *entry =
&flush_table->entries[j];
unsigned long iova_pfn = entry->iova_pfn;
unsigned long nrpages = entry->nrpages;
struct dmar_domain *domain = entry->domain;
struct page *freelist = entry->freelist;
/* On real hardware multiple invalidations are expensive */
if (cap_caching_mode(iommu->cap))
iommu_flush_iotlb_psi(iommu, domain,
mm_to_dma_pfn(iova_pfn),
nrpages, !freelist, 0);
else {
mask = ilog2(nrpages);
iommu_flush_dev_iotlb(domain,
(uint64_t)iova_pfn << PAGE_SHIFT, mask);
}
free_iova_fast(&domain->iovad, iova_pfn, nrpages);
if (freelist)
dma_free_pagelist(freelist);
}
flush_table->next = 0;
}
flush_data->size = 0;
}
static void flush_unmaps_timeout(unsigned long cpuid)
{
struct deferred_flush_data *flush_data = per_cpu_ptr(&deferred_flush, cpuid);
unsigned long flags;
spin_lock_irqsave(&flush_data->lock, flags);
flush_unmaps(flush_data);
spin_unlock_irqrestore(&flush_data->lock, flags);
}
static void add_unmap(struct dmar_domain *dom, unsigned long iova_pfn,
unsigned long nrpages, struct page *freelist)
{
unsigned long flags;
int entry_id, iommu_id;
struct intel_iommu *iommu;
struct deferred_flush_entry *entry;
struct deferred_flush_data *flush_data;
unsigned int cpuid;
cpuid = get_cpu();
flush_data = per_cpu_ptr(&deferred_flush, cpuid);
/* Flush all CPUs' entries to avoid deferring too much. If
* this becomes a bottleneck, can just flush us, and rely on
* flush timer for the rest.
*/
if (flush_data->size == HIGH_WATER_MARK) {
int cpu;
for_each_online_cpu(cpu)
flush_unmaps_timeout(cpu);
}
spin_lock_irqsave(&flush_data->lock, flags);
iommu = domain_get_iommu(dom);
iommu_id = iommu->seq_id;
entry_id = flush_data->tables[iommu_id].next;
++(flush_data->tables[iommu_id].next);
entry = &flush_data->tables[iommu_id].entries[entry_id];
entry->domain = dom;
entry->iova_pfn = iova_pfn;
entry->nrpages = nrpages;
entry->freelist = freelist;
if (!flush_data->timer_on) {
mod_timer(&flush_data->timer, jiffies + msecs_to_jiffies(10));
flush_data->timer_on = 1;
}
flush_data->size++;
spin_unlock_irqrestore(&flush_data->lock, flags);
put_cpu();
}
static void intel_unmap(struct device *dev, dma_addr_t dev_addr, size_t size)
{
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
struct dmar_domain *domain;
unsigned long start_pfn, last_pfn;
unsigned long nrpages;
unsigned long iova_pfn;
struct intel_iommu *iommu;
struct page *freelist;
if (iommu_no_mapping(dev))
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
return;
domain = find_domain(dev);
BUG_ON(!domain);
iommu = domain_get_iommu(domain);
iova_pfn = IOVA_PFN(dev_addr);
nrpages = aligned_nrpages(dev_addr, size);
start_pfn = mm_to_dma_pfn(iova_pfn);
last_pfn = start_pfn + nrpages - 1;
pr_debug("Device %s unmapping: pfn %lx-%lx\n",
dev_name(dev), start_pfn, last_pfn);
freelist = domain_unmap(domain, start_pfn, last_pfn);
if (intel_iommu_strict) {
iommu_flush_iotlb_psi(iommu, domain, start_pfn,
nrpages, !freelist, 0);
/* free iova */
free_iova_fast(&domain->iovad, iova_pfn, dma_to_mm_pfn(nrpages));
dma_free_pagelist(freelist);
} else {
add_unmap(domain, iova_pfn, nrpages, freelist);
/*
* queue up the release of the unmap to save the 1/6th of the
* cpu used up by the iotlb flush operation...
*/
}
}
static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr,
size_t size, enum dma_data_direction dir,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:46:00 +08:00
unsigned long attrs)
{
intel_unmap(dev, dev_addr, size);
}
static void *intel_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flags,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:46:00 +08:00
unsigned long attrs)
{
struct page *page = NULL;
int order;
size = PAGE_ALIGN(size);
order = get_order(size);
intel-iommu: Obey coherent_dma_mask for alloc_coherent on passthrough The model for IOMMU passthrough is that decent devices that can cope with DMA to all of memory get passthrough; crappy devices with a limited dma_mask don't -- they get to use the IOMMU anyway. This is done on the basis that IOMMU passthrough is usually wanted for performance reasons, and it's only the decent PCI devices that you really care about performance for, while the crappy 32-bit ones like your USB controller can just use the IOMMU and you won't really care. Unfortunately, the check for this was only looking at dev->dma_mask, not at dev->coherent_dma_mask. And some devices have a 32-bit coherent_dma_mask even though they have a full 64-bit dma_mask. Even more unfortunately, fixing that simple oversight would upset certain broken HP devices. Not only do they have a 32-bit coherent_dma_mask, but they also have a tendency to do stray DMA to unmapped addresses. And then they die when they take the DMA fault they so richly deserve. So if we do the 'correct' fix, it'll mean that affected users have to disable IOMMU support completely on "a large percentage of servers from a major vendor." Personally, I have little sympathy -- given that this is the _same_ 'major vendor' who is shipping machines which claim to have IOMMU support but have obviously never _once_ booted a VT-d capable OS to do any form of QA. But strictly speaking, it _would_ be a regression even though it only ever worked by fluke. For 2.6.33, we'll come up with a quirk which gives swiotlb support for this particular device, and other devices with an inadequate coherent_dma_mask will just get normal IOMMU mapping. The simplest fix for 2.6.32, though, is just to jump through some hoops to try to allocate coherent DMA memory for such devices in a place that they can reach. We'd use dma_generic_alloc_coherent() for this if it existed on IA64. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-05 06:59:34 +08:00
if (!iommu_no_mapping(dev))
intel-iommu: Obey coherent_dma_mask for alloc_coherent on passthrough The model for IOMMU passthrough is that decent devices that can cope with DMA to all of memory get passthrough; crappy devices with a limited dma_mask don't -- they get to use the IOMMU anyway. This is done on the basis that IOMMU passthrough is usually wanted for performance reasons, and it's only the decent PCI devices that you really care about performance for, while the crappy 32-bit ones like your USB controller can just use the IOMMU and you won't really care. Unfortunately, the check for this was only looking at dev->dma_mask, not at dev->coherent_dma_mask. And some devices have a 32-bit coherent_dma_mask even though they have a full 64-bit dma_mask. Even more unfortunately, fixing that simple oversight would upset certain broken HP devices. Not only do they have a 32-bit coherent_dma_mask, but they also have a tendency to do stray DMA to unmapped addresses. And then they die when they take the DMA fault they so richly deserve. So if we do the 'correct' fix, it'll mean that affected users have to disable IOMMU support completely on "a large percentage of servers from a major vendor." Personally, I have little sympathy -- given that this is the _same_ 'major vendor' who is shipping machines which claim to have IOMMU support but have obviously never _once_ booted a VT-d capable OS to do any form of QA. But strictly speaking, it _would_ be a regression even though it only ever worked by fluke. For 2.6.33, we'll come up with a quirk which gives swiotlb support for this particular device, and other devices with an inadequate coherent_dma_mask will just get normal IOMMU mapping. The simplest fix for 2.6.32, though, is just to jump through some hoops to try to allocate coherent DMA memory for such devices in a place that they can reach. We'd use dma_generic_alloc_coherent() for this if it existed on IA64. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-05 06:59:34 +08:00
flags &= ~(GFP_DMA | GFP_DMA32);
else if (dev->coherent_dma_mask < dma_get_required_mask(dev)) {
if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
intel-iommu: Obey coherent_dma_mask for alloc_coherent on passthrough The model for IOMMU passthrough is that decent devices that can cope with DMA to all of memory get passthrough; crappy devices with a limited dma_mask don't -- they get to use the IOMMU anyway. This is done on the basis that IOMMU passthrough is usually wanted for performance reasons, and it's only the decent PCI devices that you really care about performance for, while the crappy 32-bit ones like your USB controller can just use the IOMMU and you won't really care. Unfortunately, the check for this was only looking at dev->dma_mask, not at dev->coherent_dma_mask. And some devices have a 32-bit coherent_dma_mask even though they have a full 64-bit dma_mask. Even more unfortunately, fixing that simple oversight would upset certain broken HP devices. Not only do they have a 32-bit coherent_dma_mask, but they also have a tendency to do stray DMA to unmapped addresses. And then they die when they take the DMA fault they so richly deserve. So if we do the 'correct' fix, it'll mean that affected users have to disable IOMMU support completely on "a large percentage of servers from a major vendor." Personally, I have little sympathy -- given that this is the _same_ 'major vendor' who is shipping machines which claim to have IOMMU support but have obviously never _once_ booted a VT-d capable OS to do any form of QA. But strictly speaking, it _would_ be a regression even though it only ever worked by fluke. For 2.6.33, we'll come up with a quirk which gives swiotlb support for this particular device, and other devices with an inadequate coherent_dma_mask will just get normal IOMMU mapping. The simplest fix for 2.6.32, though, is just to jump through some hoops to try to allocate coherent DMA memory for such devices in a place that they can reach. We'd use dma_generic_alloc_coherent() for this if it existed on IA64. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-05 06:59:34 +08:00
flags |= GFP_DMA;
else
flags |= GFP_DMA32;
}
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07 08:28:21 +08:00
if (gfpflags_allow_blocking(flags)) {
unsigned int count = size >> PAGE_SHIFT;
page = dma_alloc_from_contiguous(dev, count, order, flags);
if (page && iommu_no_mapping(dev) &&
page_to_phys(page) + size > dev->coherent_dma_mask) {
dma_release_from_contiguous(dev, page, count);
page = NULL;
}
}
if (!page)
page = alloc_pages(flags, order);
if (!page)
return NULL;
memset(page_address(page), 0, size);
*dma_handle = __intel_map_single(dev, page_to_phys(page), size,
DMA_BIDIRECTIONAL,
dev->coherent_dma_mask);
if (*dma_handle)
return page_address(page);
if (!dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT))
__free_pages(page, order);
return NULL;
}
static void intel_free_coherent(struct device *dev, size_t size, void *vaddr,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:46:00 +08:00
dma_addr_t dma_handle, unsigned long attrs)
{
int order;
struct page *page = virt_to_page(vaddr);
size = PAGE_ALIGN(size);
order = get_order(size);
intel_unmap(dev, dma_handle, size);
if (!dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT))
__free_pages(page, order);
}
static void intel_unmap_sg(struct device *dev, struct scatterlist *sglist,
int nelems, enum dma_data_direction dir,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:46:00 +08:00
unsigned long attrs)
{
dma_addr_t startaddr = sg_dma_address(sglist) & PAGE_MASK;
unsigned long nrpages = 0;
struct scatterlist *sg;
int i;
for_each_sg(sglist, sg, nelems, i) {
nrpages += aligned_nrpages(sg_dma_address(sg), sg_dma_len(sg));
}
intel_unmap(dev, startaddr, nrpages << VTD_PAGE_SHIFT);
}
static int intel_nontranslate_map_sg(struct device *hddev,
struct scatterlist *sglist, int nelems, int dir)
{
int i;
struct scatterlist *sg;
for_each_sg(sglist, sg, nelems, i) {
BUG_ON(!sg_page(sg));
sg->dma_address = page_to_phys(sg_page(sg)) + sg->offset;
sg->dma_length = sg->length;
}
return nelems;
}
static int intel_map_sg(struct device *dev, struct scatterlist *sglist, int nelems,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:46:00 +08:00
enum dma_data_direction dir, unsigned long attrs)
{
int i;
struct dmar_domain *domain;
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
size_t size = 0;
int prot = 0;
unsigned long iova_pfn;
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
int ret;
struct scatterlist *sg;
unsigned long start_vpfn;
struct intel_iommu *iommu;
BUG_ON(dir == DMA_NONE);
if (iommu_no_mapping(dev))
return intel_nontranslate_map_sg(dev, sglist, nelems, dir);
domain = get_valid_domain_for_dev(dev);
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
if (!domain)
return 0;
iommu = domain_get_iommu(domain);
for_each_sg(sglist, sg, nelems, i)
size += aligned_nrpages(sg->offset, sg->length);
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
iova_pfn = intel_alloc_iova(dev, domain, dma_to_mm_pfn(size),
*dev->dma_mask);
if (!iova_pfn) {
sglist->dma_length = 0;
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
return 0;
}
/*
* Check if DMAR supports zero-length reads on write only
* mappings..
*/
if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL || \
!cap_zlr(iommu->cap))
intel-iommu: optimize sg map/unmap calls This patch adds PageSelectiveInvalidation support replacing existing DomainSelectiveInvalidation for intel_{map/unmap}_sg() calls and also enables to mapping one big contiguous DMA virtual address which is mapped to discontiguous physical address for SG map/unmap calls. "Doamin selective invalidations" wipes out the IOMMU address translation cache based on domain ID where as "Page selective invalidations" wipes out the IOMMU address translation cache for that address mask range which is more cache friendly when compared to Domain selective invalidations. Here is how it is done. 1) changes to iova.c alloc_iova() now takes a bool size_aligned argument, which when when set, returns the io virtual address that is naturally aligned to 2 ^ x, where x is the order of the size requested. Returning this io vitual address which is naturally aligned helps iommu to do the "page selective invalidations" which is IOMMU cache friendly over "domain selective invalidations". 2) Changes to driver/pci/intel-iommu.c Clean up intel_{map/unmap}_{single/sg} () calls so that s/g map/unamp calls is no more dependent on intel_{map/unmap}_single() intel_map_sg() now computes the total DMA virtual address required and allocates the size aligned total DMA virtual address and maps the discontiguous physical address to the allocated contiguous DMA virtual address. In the intel_unmap_sg() case since the DMA virtual address is contiguous and size_aligned, PageSelectiveInvalidation is used replacing earlier DomainSelectiveInvalidations. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Suresh B <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:58 +08:00
prot |= DMA_PTE_READ;
if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
prot |= DMA_PTE_WRITE;
start_vpfn = mm_to_dma_pfn(iova_pfn);
ret = domain_sg_mapping(domain, start_vpfn, sglist, size, prot);
if (unlikely(ret)) {
dma_pte_free_pagetable(domain, start_vpfn,
start_vpfn + size - 1);
free_iova_fast(&domain->iovad, iova_pfn, dma_to_mm_pfn(size));
return 0;
}
/* it's a non-present to present mapping. Only flush if caching mode */
if (cap_caching_mode(iommu->cap))
iommu_flush_iotlb_psi(iommu, domain, start_vpfn, size, 0, 1);
else
iommu_flush_write_buffer(iommu);
return nelems;
}
static int intel_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
return !dma_addr;
}
struct dma_map_ops intel_dma_ops = {
.alloc = intel_alloc_coherent,
.free = intel_free_coherent,
.map_sg = intel_map_sg,
.unmap_sg = intel_unmap_sg,
.map_page = intel_map_page,
.unmap_page = intel_unmap_page,
.mapping_error = intel_mapping_error,
};
static inline int iommu_domain_cache_init(void)
{
int ret = 0;
iommu_domain_cache = kmem_cache_create("iommu_domain",
sizeof(struct dmar_domain),
0,
SLAB_HWCACHE_ALIGN,
NULL);
if (!iommu_domain_cache) {
pr_err("Couldn't create iommu_domain cache\n");
ret = -ENOMEM;
}
return ret;
}
static inline int iommu_devinfo_cache_init(void)
{
int ret = 0;
iommu_devinfo_cache = kmem_cache_create("iommu_devinfo",
sizeof(struct device_domain_info),
0,
SLAB_HWCACHE_ALIGN,
NULL);
if (!iommu_devinfo_cache) {
pr_err("Couldn't create devinfo cache\n");
ret = -ENOMEM;
}
return ret;
}
static int __init iommu_init_mempool(void)
{
int ret;
ret = iova_cache_get();
if (ret)
return ret;
ret = iommu_domain_cache_init();
if (ret)
goto domain_error;
ret = iommu_devinfo_cache_init();
if (!ret)
return ret;
kmem_cache_destroy(iommu_domain_cache);
domain_error:
iova_cache_put();
return -ENOMEM;
}
static void __init iommu_exit_mempool(void)
{
kmem_cache_destroy(iommu_devinfo_cache);
kmem_cache_destroy(iommu_domain_cache);
iova_cache_put();
}
static void quirk_ioat_snb_local_iommu(struct pci_dev *pdev)
{
struct dmar_drhd_unit *drhd;
u32 vtbar;
int rc;
/* We know that this device on this chipset has its own IOMMU.
* If we find it under a different IOMMU, then the BIOS is lying
* to us. Hope that the IOMMU for this device is actually
* disabled, and it needs no translation...
*/
rc = pci_bus_read_config_dword(pdev->bus, PCI_DEVFN(0, 0), 0xb0, &vtbar);
if (rc) {
/* "can't" happen */
dev_info(&pdev->dev, "failed to run vt-d quirk\n");
return;
}
vtbar &= 0xffff0000;
/* we know that the this iommu should be at offset 0xa000 from vtbar */
drhd = dmar_find_matched_drhd_unit(pdev);
if (WARN_TAINT_ONCE(!drhd || drhd->reg_base_addr - vtbar != 0xa000,
TAINT_FIRMWARE_WORKAROUND,
"BIOS assigned incorrect VT-d unit for Intel(R) QuickData Technology device\n"))
pdev->dev.archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO;
}
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB, quirk_ioat_snb_local_iommu);
static void __init init_no_remapping_devices(void)
{
struct dmar_drhd_unit *drhd;
struct device *dev;
int i;
for_each_drhd_unit(drhd) {
if (!drhd->include_all) {
for_each_active_dev_scope(drhd->devices,
drhd->devices_cnt, i, dev)
break;
/* ignore DMAR unit if no devices exist */
if (i == drhd->devices_cnt)
drhd->ignored = 1;
}
}
for_each_active_drhd_unit(drhd) {
if (drhd->include_all)
continue;
for_each_active_dev_scope(drhd->devices,
drhd->devices_cnt, i, dev)
if (!dev_is_pci(dev) || !IS_GFX_DEVICE(to_pci_dev(dev)))
break;
if (i < drhd->devices_cnt)
continue;
/* This IOMMU has *only* gfx devices. Either bypass it or
set the gfx_mapped flag, as appropriate */
if (dmar_map_gfx) {
intel_iommu_gfx_mapped = 1;
} else {
drhd->ignored = 1;
for_each_active_dev_scope(drhd->devices,
drhd->devices_cnt, i, dev)
dev->archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO;
}
}
}
#ifdef CONFIG_SUSPEND
static int init_iommu_hw(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu = NULL;
for_each_active_iommu(iommu, drhd)
if (iommu->qi)
dmar_reenable_qi(iommu);
for_each_iommu(iommu, drhd) {
if (drhd->ignored) {
/*
* we always have to disable PMRs or DMA may fail on
* this device
*/
if (force_on)
iommu_disable_protect_mem_regions(iommu);
continue;
}
iommu_flush_write_buffer(iommu);
iommu_set_root_entry(iommu);
iommu->flush.flush_context(iommu, 0, 0, 0,
DMA_CCMD_GLOBAL_INVL);
iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
iommu_enable_translation(iommu);
iommu_disable_protect_mem_regions(iommu);
}
return 0;
}
static void iommu_flush_all(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
for_each_active_iommu(iommu, drhd) {
iommu->flush.flush_context(iommu, 0, 0, 0,
DMA_CCMD_GLOBAL_INVL);
iommu->flush.flush_iotlb(iommu, 0, 0, 0,
DMA_TLB_GLOBAL_FLUSH);
}
}
static int iommu_suspend(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu = NULL;
unsigned long flag;
for_each_active_iommu(iommu, drhd) {
iommu->iommu_state = kzalloc(sizeof(u32) * MAX_SR_DMAR_REGS,
GFP_ATOMIC);
if (!iommu->iommu_state)
goto nomem;
}
iommu_flush_all();
for_each_active_iommu(iommu, drhd) {
iommu_disable_translation(iommu);
raw_spin_lock_irqsave(&iommu->register_lock, flag);
iommu->iommu_state[SR_DMAR_FECTL_REG] =
readl(iommu->reg + DMAR_FECTL_REG);
iommu->iommu_state[SR_DMAR_FEDATA_REG] =
readl(iommu->reg + DMAR_FEDATA_REG);
iommu->iommu_state[SR_DMAR_FEADDR_REG] =
readl(iommu->reg + DMAR_FEADDR_REG);
iommu->iommu_state[SR_DMAR_FEUADDR_REG] =
readl(iommu->reg + DMAR_FEUADDR_REG);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
return 0;
nomem:
for_each_active_iommu(iommu, drhd)
kfree(iommu->iommu_state);
return -ENOMEM;
}
static void iommu_resume(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu = NULL;
unsigned long flag;
if (init_iommu_hw()) {
if (force_on)
panic("tboot: IOMMU setup failed, DMAR can not resume!\n");
else
WARN(1, "IOMMU setup failed, DMAR can not resume!\n");
return;
}
for_each_active_iommu(iommu, drhd) {
raw_spin_lock_irqsave(&iommu->register_lock, flag);
writel(iommu->iommu_state[SR_DMAR_FECTL_REG],
iommu->reg + DMAR_FECTL_REG);
writel(iommu->iommu_state[SR_DMAR_FEDATA_REG],
iommu->reg + DMAR_FEDATA_REG);
writel(iommu->iommu_state[SR_DMAR_FEADDR_REG],
iommu->reg + DMAR_FEADDR_REG);
writel(iommu->iommu_state[SR_DMAR_FEUADDR_REG],
iommu->reg + DMAR_FEUADDR_REG);
raw_spin_unlock_irqrestore(&iommu->register_lock, flag);
}
for_each_active_iommu(iommu, drhd)
kfree(iommu->iommu_state);
}
static struct syscore_ops iommu_syscore_ops = {
.resume = iommu_resume,
.suspend = iommu_suspend,
};
static void __init init_iommu_pm_ops(void)
{
register_syscore_ops(&iommu_syscore_ops);
}
#else
static inline void init_iommu_pm_ops(void) {}
#endif /* CONFIG_PM */
int __init dmar_parse_one_rmrr(struct acpi_dmar_header *header, void *arg)
{
struct acpi_dmar_reserved_memory *rmrr;
int prot = DMA_PTE_READ|DMA_PTE_WRITE;
struct dmar_rmrr_unit *rmrru;
size_t length;
rmrru = kzalloc(sizeof(*rmrru), GFP_KERNEL);
if (!rmrru)
goto out;
rmrru->hdr = header;
rmrr = (struct acpi_dmar_reserved_memory *)header;
rmrru->base_address = rmrr->base_address;
rmrru->end_address = rmrr->end_address;
length = rmrr->end_address - rmrr->base_address + 1;
rmrru->resv = iommu_alloc_resv_region(rmrr->base_address, length, prot,
IOMMU_RESV_DIRECT);
if (!rmrru->resv)
goto free_rmrru;
rmrru->devices = dmar_alloc_dev_scope((void *)(rmrr + 1),
((void *)rmrr) + rmrr->header.length,
&rmrru->devices_cnt);
if (rmrru->devices_cnt && rmrru->devices == NULL)
goto free_all;
list_add(&rmrru->list, &dmar_rmrr_units);
return 0;
free_all:
kfree(rmrru->resv);
free_rmrru:
kfree(rmrru);
out:
return -ENOMEM;
}
static struct dmar_atsr_unit *dmar_find_atsr(struct acpi_dmar_atsr *atsr)
{
struct dmar_atsr_unit *atsru;
struct acpi_dmar_atsr *tmp;
list_for_each_entry_rcu(atsru, &dmar_atsr_units, list) {
tmp = (struct acpi_dmar_atsr *)atsru->hdr;
if (atsr->segment != tmp->segment)
continue;
if (atsr->header.length != tmp->header.length)
continue;
if (memcmp(atsr, tmp, atsr->header.length) == 0)
return atsru;
}
return NULL;
}
int dmar_parse_one_atsr(struct acpi_dmar_header *hdr, void *arg)
{
struct acpi_dmar_atsr *atsr;
struct dmar_atsr_unit *atsru;
if (system_state != SYSTEM_BOOTING && !intel_iommu_enabled)
return 0;
atsr = container_of(hdr, struct acpi_dmar_atsr, header);
atsru = dmar_find_atsr(atsr);
if (atsru)
return 0;
atsru = kzalloc(sizeof(*atsru) + hdr->length, GFP_KERNEL);
if (!atsru)
return -ENOMEM;
/*
* If memory is allocated from slab by ACPI _DSM method, we need to
* copy the memory content because the memory buffer will be freed
* on return.
*/
atsru->hdr = (void *)(atsru + 1);
memcpy(atsru->hdr, hdr, hdr->length);
atsru->include_all = atsr->flags & 0x1;
if (!atsru->include_all) {
atsru->devices = dmar_alloc_dev_scope((void *)(atsr + 1),
(void *)atsr + atsr->header.length,
&atsru->devices_cnt);
if (atsru->devices_cnt && atsru->devices == NULL) {
kfree(atsru);
return -ENOMEM;
}
}
list_add_rcu(&atsru->list, &dmar_atsr_units);
return 0;
}
static void intel_iommu_free_atsr(struct dmar_atsr_unit *atsru)
{
dmar_free_dev_scope(&atsru->devices, &atsru->devices_cnt);
kfree(atsru);
}
int dmar_release_one_atsr(struct acpi_dmar_header *hdr, void *arg)
{
struct acpi_dmar_atsr *atsr;
struct dmar_atsr_unit *atsru;
atsr = container_of(hdr, struct acpi_dmar_atsr, header);
atsru = dmar_find_atsr(atsr);
if (atsru) {
list_del_rcu(&atsru->list);
synchronize_rcu();
intel_iommu_free_atsr(atsru);
}
return 0;
}
int dmar_check_one_atsr(struct acpi_dmar_header *hdr, void *arg)
{
int i;
struct device *dev;
struct acpi_dmar_atsr *atsr;
struct dmar_atsr_unit *atsru;
atsr = container_of(hdr, struct acpi_dmar_atsr, header);
atsru = dmar_find_atsr(atsr);
if (!atsru)
return 0;
if (!atsru->include_all && atsru->devices && atsru->devices_cnt) {
for_each_active_dev_scope(atsru->devices, atsru->devices_cnt,
i, dev)
return -EBUSY;
}
return 0;
}
static int intel_iommu_add(struct dmar_drhd_unit *dmaru)
{
int sp, ret = 0;
struct intel_iommu *iommu = dmaru->iommu;
if (g_iommus[iommu->seq_id])
return 0;
if (hw_pass_through && !ecap_pass_through(iommu->ecap)) {
pr_warn("%s: Doesn't support hardware pass through.\n",
iommu->name);
return -ENXIO;
}
if (!ecap_sc_support(iommu->ecap) &&
domain_update_iommu_snooping(iommu)) {
pr_warn("%s: Doesn't support snooping.\n",
iommu->name);
return -ENXIO;
}
sp = domain_update_iommu_superpage(iommu) - 1;
if (sp >= 0 && !(cap_super_page_val(iommu->cap) & (1 << sp))) {
pr_warn("%s: Doesn't support large page.\n",
iommu->name);
return -ENXIO;
}
/*
* Disable translation if already enabled prior to OS handover.
*/
if (iommu->gcmd & DMA_GCMD_TE)
iommu_disable_translation(iommu);
g_iommus[iommu->seq_id] = iommu;
ret = iommu_init_domains(iommu);
if (ret == 0)
ret = iommu_alloc_root_entry(iommu);
if (ret)
goto out;
#ifdef CONFIG_INTEL_IOMMU_SVM
if (pasid_enabled(iommu))
intel_svm_alloc_pasid_tables(iommu);
#endif
if (dmaru->ignored) {
/*
* we always have to disable PMRs or DMA may fail on this device
*/
if (force_on)
iommu_disable_protect_mem_regions(iommu);
return 0;
}
intel_iommu_init_qi(iommu);
iommu_flush_write_buffer(iommu);
#ifdef CONFIG_INTEL_IOMMU_SVM
if (pasid_enabled(iommu) && ecap_prs(iommu->ecap)) {
ret = intel_svm_enable_prq(iommu);
if (ret)
goto disable_iommu;
}
#endif
ret = dmar_set_interrupt(iommu);
if (ret)
goto disable_iommu;
iommu_set_root_entry(iommu);
iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
iommu_enable_translation(iommu);
iommu_disable_protect_mem_regions(iommu);
return 0;
disable_iommu:
disable_dmar_iommu(iommu);
out:
free_dmar_iommu(iommu);
return ret;
}
int dmar_iommu_hotplug(struct dmar_drhd_unit *dmaru, bool insert)
{
int ret = 0;
struct intel_iommu *iommu = dmaru->iommu;
if (!intel_iommu_enabled)
return 0;
if (iommu == NULL)
return -EINVAL;
if (insert) {
ret = intel_iommu_add(dmaru);
} else {
disable_dmar_iommu(iommu);
free_dmar_iommu(iommu);
}
return ret;
}
static void intel_iommu_free_dmars(void)
{
struct dmar_rmrr_unit *rmrru, *rmrr_n;
struct dmar_atsr_unit *atsru, *atsr_n;
list_for_each_entry_safe(rmrru, rmrr_n, &dmar_rmrr_units, list) {
list_del(&rmrru->list);
dmar_free_dev_scope(&rmrru->devices, &rmrru->devices_cnt);
kfree(rmrru->resv);
kfree(rmrru);
}
list_for_each_entry_safe(atsru, atsr_n, &dmar_atsr_units, list) {
list_del(&atsru->list);
intel_iommu_free_atsr(atsru);
}
}
int dmar_find_matched_atsr_unit(struct pci_dev *dev)
{
int i, ret = 1;
struct pci_bus *bus;
struct pci_dev *bridge = NULL;
struct device *tmp;
struct acpi_dmar_atsr *atsr;
struct dmar_atsr_unit *atsru;
dev = pci_physfn(dev);
for (bus = dev->bus; bus; bus = bus->parent) {
iommu/vt-d: Fix error in detect ATS capability Current Intel IOMMU driver only matches a PCIe root port with the first DRHD unit with the samge segment number. It will report false result if there are multiple DRHD units with the same segment number, thus fail to detect ATS capability for some PCIe devices. This patch refines function dmar_find_matched_atsr_unit() to search all DRHD units with the same segment number. An example DMAR table entries as below: [1D0h 0464 2] Subtable Type : 0002 <Root Port ATS Capability> [1D2h 0466 2] Length : 0028 [1D4h 0468 1] Flags : 00 [1D5h 0469 1] Reserved : 00 [1D6h 0470 2] PCI Segment Number : 0000 [1D8h 0472 1] Device Scope Entry Type : 02 [1D9h 0473 1] Entry Length : 08 [1DAh 0474 2] Reserved : 0000 [1DCh 0476 1] Enumeration ID : 00 [1DDh 0477 1] PCI Bus Number : 00 [1DEh 0478 2] PCI Path : [02, 00] [1E0h 0480 1] Device Scope Entry Type : 02 [1E1h 0481 1] Entry Length : 08 [1E2h 0482 2] Reserved : 0000 [1E4h 0484 1] Enumeration ID : 00 [1E5h 0485 1] PCI Bus Number : 00 [1E6h 0486 2] PCI Path : [03, 00] [1E8h 0488 1] Device Scope Entry Type : 02 [1E9h 0489 1] Entry Length : 08 [1EAh 0490 2] Reserved : 0000 [1ECh 0492 1] Enumeration ID : 00 [1EDh 0493 1] PCI Bus Number : 00 [1EEh 0494 2] PCI Path : [03, 02] [1F0h 0496 1] Device Scope Entry Type : 02 [1F1h 0497 1] Entry Length : 08 [1F2h 0498 2] Reserved : 0000 [1F4h 0500 1] Enumeration ID : 00 [1F5h 0501 1] PCI Bus Number : 00 [1F6h 0502 2] PCI Path : [03, 03] [1F8h 0504 2] Subtable Type : 0002 <Root Port ATS Capability> [1FAh 0506 2] Length : 0020 [1FCh 0508 1] Flags : 00 [1FDh 0509 1] Reserved : 00 [1FEh 0510 2] PCI Segment Number : 0000 [200h 0512 1] Device Scope Entry Type : 02 [201h 0513 1] Entry Length : 08 [202h 0514 2] Reserved : 0000 [204h 0516 1] Enumeration ID : 00 [205h 0517 1] PCI Bus Number : 40 [206h 0518 2] PCI Path : [02, 00] [208h 0520 1] Device Scope Entry Type : 02 [209h 0521 1] Entry Length : 08 [20Ah 0522 2] Reserved : 0000 [20Ch 0524 1] Enumeration ID : 00 [20Dh 0525 1] PCI Bus Number : 40 [20Eh 0526 2] PCI Path : [02, 02] [210h 0528 1] Device Scope Entry Type : 02 [211h 0529 1] Entry Length : 08 [212h 0530 2] Reserved : 0000 [214h 0532 1] Enumeration ID : 00 [215h 0533 1] PCI Bus Number : 40 [216h 0534 2] PCI Path : [03, 00] [218h 0536 2] Subtable Type : 0002 <Root Port ATS Capability> [21Ah 0538 2] Length : 0020 [21Ch 0540 1] Flags : 00 [21Dh 0541 1] Reserved : 00 [21Eh 0542 2] PCI Segment Number : 0000 [220h 0544 1] Device Scope Entry Type : 02 [221h 0545 1] Entry Length : 08 [222h 0546 2] Reserved : 0000 [224h 0548 1] Enumeration ID : 00 [225h 0549 1] PCI Bus Number : 80 [226h 0550 2] PCI Path : [02, 00] [228h 0552 1] Device Scope Entry Type : 02 [229h 0553 1] Entry Length : 08 [22Ah 0554 2] Reserved : 0000 [22Ch 0556 1] Enumeration ID : 00 [22Dh 0557 1] PCI Bus Number : 80 [22Eh 0558 2] PCI Path : [02, 02] [230h 0560 1] Device Scope Entry Type : 02 [231h 0561 1] Entry Length : 08 [232h 0562 2] Reserved : 0000 [234h 0564 1] Enumeration ID : 00 [235h 0565 1] PCI Bus Number : 80 [236h 0566 2] PCI Path : [03, 00] [238h 0568 2] Subtable Type : 0002 <Root Port ATS Capability> [23Ah 0570 2] Length : 0020 [23Ch 0572 1] Flags : 00 [23Dh 0573 1] Reserved : 00 [23Eh 0574 2] PCI Segment Number : 0000 [240h 0576 1] Device Scope Entry Type : 02 [241h 0577 1] Entry Length : 08 [242h 0578 2] Reserved : 0000 [244h 0580 1] Enumeration ID : 00 [245h 0581 1] PCI Bus Number : C0 [246h 0582 2] PCI Path : [02, 00] [248h 0584 1] Device Scope Entry Type : 02 [249h 0585 1] Entry Length : 08 [24Ah 0586 2] Reserved : 0000 [24Ch 0588 1] Enumeration ID : 00 [24Dh 0589 1] PCI Bus Number : C0 [24Eh 0590 2] PCI Path : [02, 02] [250h 0592 1] Device Scope Entry Type : 02 [251h 0593 1] Entry Length : 08 [252h 0594 2] Reserved : 0000 [254h 0596 1] Enumeration ID : 00 [255h 0597 1] PCI Bus Number : C0 [256h 0598 2] PCI Path : [03, 00] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:31 +08:00
bridge = bus->self;
/* If it's an integrated device, allow ATS */
if (!bridge)
return 1;
/* Connected via non-PCIe: no ATS */
if (!pci_is_pcie(bridge) ||
pci_pcie_type(bridge) == PCI_EXP_TYPE_PCI_BRIDGE)
return 0;
/* If we found the root port, look it up in the ATSR */
iommu/vt-d: Fix error in detect ATS capability Current Intel IOMMU driver only matches a PCIe root port with the first DRHD unit with the samge segment number. It will report false result if there are multiple DRHD units with the same segment number, thus fail to detect ATS capability for some PCIe devices. This patch refines function dmar_find_matched_atsr_unit() to search all DRHD units with the same segment number. An example DMAR table entries as below: [1D0h 0464 2] Subtable Type : 0002 <Root Port ATS Capability> [1D2h 0466 2] Length : 0028 [1D4h 0468 1] Flags : 00 [1D5h 0469 1] Reserved : 00 [1D6h 0470 2] PCI Segment Number : 0000 [1D8h 0472 1] Device Scope Entry Type : 02 [1D9h 0473 1] Entry Length : 08 [1DAh 0474 2] Reserved : 0000 [1DCh 0476 1] Enumeration ID : 00 [1DDh 0477 1] PCI Bus Number : 00 [1DEh 0478 2] PCI Path : [02, 00] [1E0h 0480 1] Device Scope Entry Type : 02 [1E1h 0481 1] Entry Length : 08 [1E2h 0482 2] Reserved : 0000 [1E4h 0484 1] Enumeration ID : 00 [1E5h 0485 1] PCI Bus Number : 00 [1E6h 0486 2] PCI Path : [03, 00] [1E8h 0488 1] Device Scope Entry Type : 02 [1E9h 0489 1] Entry Length : 08 [1EAh 0490 2] Reserved : 0000 [1ECh 0492 1] Enumeration ID : 00 [1EDh 0493 1] PCI Bus Number : 00 [1EEh 0494 2] PCI Path : [03, 02] [1F0h 0496 1] Device Scope Entry Type : 02 [1F1h 0497 1] Entry Length : 08 [1F2h 0498 2] Reserved : 0000 [1F4h 0500 1] Enumeration ID : 00 [1F5h 0501 1] PCI Bus Number : 00 [1F6h 0502 2] PCI Path : [03, 03] [1F8h 0504 2] Subtable Type : 0002 <Root Port ATS Capability> [1FAh 0506 2] Length : 0020 [1FCh 0508 1] Flags : 00 [1FDh 0509 1] Reserved : 00 [1FEh 0510 2] PCI Segment Number : 0000 [200h 0512 1] Device Scope Entry Type : 02 [201h 0513 1] Entry Length : 08 [202h 0514 2] Reserved : 0000 [204h 0516 1] Enumeration ID : 00 [205h 0517 1] PCI Bus Number : 40 [206h 0518 2] PCI Path : [02, 00] [208h 0520 1] Device Scope Entry Type : 02 [209h 0521 1] Entry Length : 08 [20Ah 0522 2] Reserved : 0000 [20Ch 0524 1] Enumeration ID : 00 [20Dh 0525 1] PCI Bus Number : 40 [20Eh 0526 2] PCI Path : [02, 02] [210h 0528 1] Device Scope Entry Type : 02 [211h 0529 1] Entry Length : 08 [212h 0530 2] Reserved : 0000 [214h 0532 1] Enumeration ID : 00 [215h 0533 1] PCI Bus Number : 40 [216h 0534 2] PCI Path : [03, 00] [218h 0536 2] Subtable Type : 0002 <Root Port ATS Capability> [21Ah 0538 2] Length : 0020 [21Ch 0540 1] Flags : 00 [21Dh 0541 1] Reserved : 00 [21Eh 0542 2] PCI Segment Number : 0000 [220h 0544 1] Device Scope Entry Type : 02 [221h 0545 1] Entry Length : 08 [222h 0546 2] Reserved : 0000 [224h 0548 1] Enumeration ID : 00 [225h 0549 1] PCI Bus Number : 80 [226h 0550 2] PCI Path : [02, 00] [228h 0552 1] Device Scope Entry Type : 02 [229h 0553 1] Entry Length : 08 [22Ah 0554 2] Reserved : 0000 [22Ch 0556 1] Enumeration ID : 00 [22Dh 0557 1] PCI Bus Number : 80 [22Eh 0558 2] PCI Path : [02, 02] [230h 0560 1] Device Scope Entry Type : 02 [231h 0561 1] Entry Length : 08 [232h 0562 2] Reserved : 0000 [234h 0564 1] Enumeration ID : 00 [235h 0565 1] PCI Bus Number : 80 [236h 0566 2] PCI Path : [03, 00] [238h 0568 2] Subtable Type : 0002 <Root Port ATS Capability> [23Ah 0570 2] Length : 0020 [23Ch 0572 1] Flags : 00 [23Dh 0573 1] Reserved : 00 [23Eh 0574 2] PCI Segment Number : 0000 [240h 0576 1] Device Scope Entry Type : 02 [241h 0577 1] Entry Length : 08 [242h 0578 2] Reserved : 0000 [244h 0580 1] Enumeration ID : 00 [245h 0581 1] PCI Bus Number : C0 [246h 0582 2] PCI Path : [02, 00] [248h 0584 1] Device Scope Entry Type : 02 [249h 0585 1] Entry Length : 08 [24Ah 0586 2] Reserved : 0000 [24Ch 0588 1] Enumeration ID : 00 [24Dh 0589 1] PCI Bus Number : C0 [24Eh 0590 2] PCI Path : [02, 02] [250h 0592 1] Device Scope Entry Type : 02 [251h 0593 1] Entry Length : 08 [252h 0594 2] Reserved : 0000 [254h 0596 1] Enumeration ID : 00 [255h 0597 1] PCI Bus Number : C0 [256h 0598 2] PCI Path : [03, 00] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:31 +08:00
if (pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT)
break;
}
rcu_read_lock();
iommu/vt-d: Fix error in detect ATS capability Current Intel IOMMU driver only matches a PCIe root port with the first DRHD unit with the samge segment number. It will report false result if there are multiple DRHD units with the same segment number, thus fail to detect ATS capability for some PCIe devices. This patch refines function dmar_find_matched_atsr_unit() to search all DRHD units with the same segment number. An example DMAR table entries as below: [1D0h 0464 2] Subtable Type : 0002 <Root Port ATS Capability> [1D2h 0466 2] Length : 0028 [1D4h 0468 1] Flags : 00 [1D5h 0469 1] Reserved : 00 [1D6h 0470 2] PCI Segment Number : 0000 [1D8h 0472 1] Device Scope Entry Type : 02 [1D9h 0473 1] Entry Length : 08 [1DAh 0474 2] Reserved : 0000 [1DCh 0476 1] Enumeration ID : 00 [1DDh 0477 1] PCI Bus Number : 00 [1DEh 0478 2] PCI Path : [02, 00] [1E0h 0480 1] Device Scope Entry Type : 02 [1E1h 0481 1] Entry Length : 08 [1E2h 0482 2] Reserved : 0000 [1E4h 0484 1] Enumeration ID : 00 [1E5h 0485 1] PCI Bus Number : 00 [1E6h 0486 2] PCI Path : [03, 00] [1E8h 0488 1] Device Scope Entry Type : 02 [1E9h 0489 1] Entry Length : 08 [1EAh 0490 2] Reserved : 0000 [1ECh 0492 1] Enumeration ID : 00 [1EDh 0493 1] PCI Bus Number : 00 [1EEh 0494 2] PCI Path : [03, 02] [1F0h 0496 1] Device Scope Entry Type : 02 [1F1h 0497 1] Entry Length : 08 [1F2h 0498 2] Reserved : 0000 [1F4h 0500 1] Enumeration ID : 00 [1F5h 0501 1] PCI Bus Number : 00 [1F6h 0502 2] PCI Path : [03, 03] [1F8h 0504 2] Subtable Type : 0002 <Root Port ATS Capability> [1FAh 0506 2] Length : 0020 [1FCh 0508 1] Flags : 00 [1FDh 0509 1] Reserved : 00 [1FEh 0510 2] PCI Segment Number : 0000 [200h 0512 1] Device Scope Entry Type : 02 [201h 0513 1] Entry Length : 08 [202h 0514 2] Reserved : 0000 [204h 0516 1] Enumeration ID : 00 [205h 0517 1] PCI Bus Number : 40 [206h 0518 2] PCI Path : [02, 00] [208h 0520 1] Device Scope Entry Type : 02 [209h 0521 1] Entry Length : 08 [20Ah 0522 2] Reserved : 0000 [20Ch 0524 1] Enumeration ID : 00 [20Dh 0525 1] PCI Bus Number : 40 [20Eh 0526 2] PCI Path : [02, 02] [210h 0528 1] Device Scope Entry Type : 02 [211h 0529 1] Entry Length : 08 [212h 0530 2] Reserved : 0000 [214h 0532 1] Enumeration ID : 00 [215h 0533 1] PCI Bus Number : 40 [216h 0534 2] PCI Path : [03, 00] [218h 0536 2] Subtable Type : 0002 <Root Port ATS Capability> [21Ah 0538 2] Length : 0020 [21Ch 0540 1] Flags : 00 [21Dh 0541 1] Reserved : 00 [21Eh 0542 2] PCI Segment Number : 0000 [220h 0544 1] Device Scope Entry Type : 02 [221h 0545 1] Entry Length : 08 [222h 0546 2] Reserved : 0000 [224h 0548 1] Enumeration ID : 00 [225h 0549 1] PCI Bus Number : 80 [226h 0550 2] PCI Path : [02, 00] [228h 0552 1] Device Scope Entry Type : 02 [229h 0553 1] Entry Length : 08 [22Ah 0554 2] Reserved : 0000 [22Ch 0556 1] Enumeration ID : 00 [22Dh 0557 1] PCI Bus Number : 80 [22Eh 0558 2] PCI Path : [02, 02] [230h 0560 1] Device Scope Entry Type : 02 [231h 0561 1] Entry Length : 08 [232h 0562 2] Reserved : 0000 [234h 0564 1] Enumeration ID : 00 [235h 0565 1] PCI Bus Number : 80 [236h 0566 2] PCI Path : [03, 00] [238h 0568 2] Subtable Type : 0002 <Root Port ATS Capability> [23Ah 0570 2] Length : 0020 [23Ch 0572 1] Flags : 00 [23Dh 0573 1] Reserved : 00 [23Eh 0574 2] PCI Segment Number : 0000 [240h 0576 1] Device Scope Entry Type : 02 [241h 0577 1] Entry Length : 08 [242h 0578 2] Reserved : 0000 [244h 0580 1] Enumeration ID : 00 [245h 0581 1] PCI Bus Number : C0 [246h 0582 2] PCI Path : [02, 00] [248h 0584 1] Device Scope Entry Type : 02 [249h 0585 1] Entry Length : 08 [24Ah 0586 2] Reserved : 0000 [24Ch 0588 1] Enumeration ID : 00 [24Dh 0589 1] PCI Bus Number : C0 [24Eh 0590 2] PCI Path : [02, 02] [250h 0592 1] Device Scope Entry Type : 02 [251h 0593 1] Entry Length : 08 [252h 0594 2] Reserved : 0000 [254h 0596 1] Enumeration ID : 00 [255h 0597 1] PCI Bus Number : C0 [256h 0598 2] PCI Path : [03, 00] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:31 +08:00
list_for_each_entry_rcu(atsru, &dmar_atsr_units, list) {
atsr = container_of(atsru->hdr, struct acpi_dmar_atsr, header);
if (atsr->segment != pci_domain_nr(dev->bus))
continue;
for_each_dev_scope(atsru->devices, atsru->devices_cnt, i, tmp)
if (tmp == &bridge->dev)
goto out;
iommu/vt-d: Fix error in detect ATS capability Current Intel IOMMU driver only matches a PCIe root port with the first DRHD unit with the samge segment number. It will report false result if there are multiple DRHD units with the same segment number, thus fail to detect ATS capability for some PCIe devices. This patch refines function dmar_find_matched_atsr_unit() to search all DRHD units with the same segment number. An example DMAR table entries as below: [1D0h 0464 2] Subtable Type : 0002 <Root Port ATS Capability> [1D2h 0466 2] Length : 0028 [1D4h 0468 1] Flags : 00 [1D5h 0469 1] Reserved : 00 [1D6h 0470 2] PCI Segment Number : 0000 [1D8h 0472 1] Device Scope Entry Type : 02 [1D9h 0473 1] Entry Length : 08 [1DAh 0474 2] Reserved : 0000 [1DCh 0476 1] Enumeration ID : 00 [1DDh 0477 1] PCI Bus Number : 00 [1DEh 0478 2] PCI Path : [02, 00] [1E0h 0480 1] Device Scope Entry Type : 02 [1E1h 0481 1] Entry Length : 08 [1E2h 0482 2] Reserved : 0000 [1E4h 0484 1] Enumeration ID : 00 [1E5h 0485 1] PCI Bus Number : 00 [1E6h 0486 2] PCI Path : [03, 00] [1E8h 0488 1] Device Scope Entry Type : 02 [1E9h 0489 1] Entry Length : 08 [1EAh 0490 2] Reserved : 0000 [1ECh 0492 1] Enumeration ID : 00 [1EDh 0493 1] PCI Bus Number : 00 [1EEh 0494 2] PCI Path : [03, 02] [1F0h 0496 1] Device Scope Entry Type : 02 [1F1h 0497 1] Entry Length : 08 [1F2h 0498 2] Reserved : 0000 [1F4h 0500 1] Enumeration ID : 00 [1F5h 0501 1] PCI Bus Number : 00 [1F6h 0502 2] PCI Path : [03, 03] [1F8h 0504 2] Subtable Type : 0002 <Root Port ATS Capability> [1FAh 0506 2] Length : 0020 [1FCh 0508 1] Flags : 00 [1FDh 0509 1] Reserved : 00 [1FEh 0510 2] PCI Segment Number : 0000 [200h 0512 1] Device Scope Entry Type : 02 [201h 0513 1] Entry Length : 08 [202h 0514 2] Reserved : 0000 [204h 0516 1] Enumeration ID : 00 [205h 0517 1] PCI Bus Number : 40 [206h 0518 2] PCI Path : [02, 00] [208h 0520 1] Device Scope Entry Type : 02 [209h 0521 1] Entry Length : 08 [20Ah 0522 2] Reserved : 0000 [20Ch 0524 1] Enumeration ID : 00 [20Dh 0525 1] PCI Bus Number : 40 [20Eh 0526 2] PCI Path : [02, 02] [210h 0528 1] Device Scope Entry Type : 02 [211h 0529 1] Entry Length : 08 [212h 0530 2] Reserved : 0000 [214h 0532 1] Enumeration ID : 00 [215h 0533 1] PCI Bus Number : 40 [216h 0534 2] PCI Path : [03, 00] [218h 0536 2] Subtable Type : 0002 <Root Port ATS Capability> [21Ah 0538 2] Length : 0020 [21Ch 0540 1] Flags : 00 [21Dh 0541 1] Reserved : 00 [21Eh 0542 2] PCI Segment Number : 0000 [220h 0544 1] Device Scope Entry Type : 02 [221h 0545 1] Entry Length : 08 [222h 0546 2] Reserved : 0000 [224h 0548 1] Enumeration ID : 00 [225h 0549 1] PCI Bus Number : 80 [226h 0550 2] PCI Path : [02, 00] [228h 0552 1] Device Scope Entry Type : 02 [229h 0553 1] Entry Length : 08 [22Ah 0554 2] Reserved : 0000 [22Ch 0556 1] Enumeration ID : 00 [22Dh 0557 1] PCI Bus Number : 80 [22Eh 0558 2] PCI Path : [02, 02] [230h 0560 1] Device Scope Entry Type : 02 [231h 0561 1] Entry Length : 08 [232h 0562 2] Reserved : 0000 [234h 0564 1] Enumeration ID : 00 [235h 0565 1] PCI Bus Number : 80 [236h 0566 2] PCI Path : [03, 00] [238h 0568 2] Subtable Type : 0002 <Root Port ATS Capability> [23Ah 0570 2] Length : 0020 [23Ch 0572 1] Flags : 00 [23Dh 0573 1] Reserved : 00 [23Eh 0574 2] PCI Segment Number : 0000 [240h 0576 1] Device Scope Entry Type : 02 [241h 0577 1] Entry Length : 08 [242h 0578 2] Reserved : 0000 [244h 0580 1] Enumeration ID : 00 [245h 0581 1] PCI Bus Number : C0 [246h 0582 2] PCI Path : [02, 00] [248h 0584 1] Device Scope Entry Type : 02 [249h 0585 1] Entry Length : 08 [24Ah 0586 2] Reserved : 0000 [24Ch 0588 1] Enumeration ID : 00 [24Dh 0589 1] PCI Bus Number : C0 [24Eh 0590 2] PCI Path : [02, 02] [250h 0592 1] Device Scope Entry Type : 02 [251h 0593 1] Entry Length : 08 [252h 0594 2] Reserved : 0000 [254h 0596 1] Enumeration ID : 00 [255h 0597 1] PCI Bus Number : C0 [256h 0598 2] PCI Path : [03, 00] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:31 +08:00
if (atsru->include_all)
goto out;
iommu/vt-d: Fix error in detect ATS capability Current Intel IOMMU driver only matches a PCIe root port with the first DRHD unit with the samge segment number. It will report false result if there are multiple DRHD units with the same segment number, thus fail to detect ATS capability for some PCIe devices. This patch refines function dmar_find_matched_atsr_unit() to search all DRHD units with the same segment number. An example DMAR table entries as below: [1D0h 0464 2] Subtable Type : 0002 <Root Port ATS Capability> [1D2h 0466 2] Length : 0028 [1D4h 0468 1] Flags : 00 [1D5h 0469 1] Reserved : 00 [1D6h 0470 2] PCI Segment Number : 0000 [1D8h 0472 1] Device Scope Entry Type : 02 [1D9h 0473 1] Entry Length : 08 [1DAh 0474 2] Reserved : 0000 [1DCh 0476 1] Enumeration ID : 00 [1DDh 0477 1] PCI Bus Number : 00 [1DEh 0478 2] PCI Path : [02, 00] [1E0h 0480 1] Device Scope Entry Type : 02 [1E1h 0481 1] Entry Length : 08 [1E2h 0482 2] Reserved : 0000 [1E4h 0484 1] Enumeration ID : 00 [1E5h 0485 1] PCI Bus Number : 00 [1E6h 0486 2] PCI Path : [03, 00] [1E8h 0488 1] Device Scope Entry Type : 02 [1E9h 0489 1] Entry Length : 08 [1EAh 0490 2] Reserved : 0000 [1ECh 0492 1] Enumeration ID : 00 [1EDh 0493 1] PCI Bus Number : 00 [1EEh 0494 2] PCI Path : [03, 02] [1F0h 0496 1] Device Scope Entry Type : 02 [1F1h 0497 1] Entry Length : 08 [1F2h 0498 2] Reserved : 0000 [1F4h 0500 1] Enumeration ID : 00 [1F5h 0501 1] PCI Bus Number : 00 [1F6h 0502 2] PCI Path : [03, 03] [1F8h 0504 2] Subtable Type : 0002 <Root Port ATS Capability> [1FAh 0506 2] Length : 0020 [1FCh 0508 1] Flags : 00 [1FDh 0509 1] Reserved : 00 [1FEh 0510 2] PCI Segment Number : 0000 [200h 0512 1] Device Scope Entry Type : 02 [201h 0513 1] Entry Length : 08 [202h 0514 2] Reserved : 0000 [204h 0516 1] Enumeration ID : 00 [205h 0517 1] PCI Bus Number : 40 [206h 0518 2] PCI Path : [02, 00] [208h 0520 1] Device Scope Entry Type : 02 [209h 0521 1] Entry Length : 08 [20Ah 0522 2] Reserved : 0000 [20Ch 0524 1] Enumeration ID : 00 [20Dh 0525 1] PCI Bus Number : 40 [20Eh 0526 2] PCI Path : [02, 02] [210h 0528 1] Device Scope Entry Type : 02 [211h 0529 1] Entry Length : 08 [212h 0530 2] Reserved : 0000 [214h 0532 1] Enumeration ID : 00 [215h 0533 1] PCI Bus Number : 40 [216h 0534 2] PCI Path : [03, 00] [218h 0536 2] Subtable Type : 0002 <Root Port ATS Capability> [21Ah 0538 2] Length : 0020 [21Ch 0540 1] Flags : 00 [21Dh 0541 1] Reserved : 00 [21Eh 0542 2] PCI Segment Number : 0000 [220h 0544 1] Device Scope Entry Type : 02 [221h 0545 1] Entry Length : 08 [222h 0546 2] Reserved : 0000 [224h 0548 1] Enumeration ID : 00 [225h 0549 1] PCI Bus Number : 80 [226h 0550 2] PCI Path : [02, 00] [228h 0552 1] Device Scope Entry Type : 02 [229h 0553 1] Entry Length : 08 [22Ah 0554 2] Reserved : 0000 [22Ch 0556 1] Enumeration ID : 00 [22Dh 0557 1] PCI Bus Number : 80 [22Eh 0558 2] PCI Path : [02, 02] [230h 0560 1] Device Scope Entry Type : 02 [231h 0561 1] Entry Length : 08 [232h 0562 2] Reserved : 0000 [234h 0564 1] Enumeration ID : 00 [235h 0565 1] PCI Bus Number : 80 [236h 0566 2] PCI Path : [03, 00] [238h 0568 2] Subtable Type : 0002 <Root Port ATS Capability> [23Ah 0570 2] Length : 0020 [23Ch 0572 1] Flags : 00 [23Dh 0573 1] Reserved : 00 [23Eh 0574 2] PCI Segment Number : 0000 [240h 0576 1] Device Scope Entry Type : 02 [241h 0577 1] Entry Length : 08 [242h 0578 2] Reserved : 0000 [244h 0580 1] Enumeration ID : 00 [245h 0581 1] PCI Bus Number : C0 [246h 0582 2] PCI Path : [02, 00] [248h 0584 1] Device Scope Entry Type : 02 [249h 0585 1] Entry Length : 08 [24Ah 0586 2] Reserved : 0000 [24Ch 0588 1] Enumeration ID : 00 [24Dh 0589 1] PCI Bus Number : C0 [24Eh 0590 2] PCI Path : [02, 02] [250h 0592 1] Device Scope Entry Type : 02 [251h 0593 1] Entry Length : 08 [252h 0594 2] Reserved : 0000 [254h 0596 1] Enumeration ID : 00 [255h 0597 1] PCI Bus Number : C0 [256h 0598 2] PCI Path : [03, 00] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:31 +08:00
}
ret = 0;
out:
rcu_read_unlock();
return ret;
}
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
int dmar_iommu_notify_scope_dev(struct dmar_pci_notify_info *info)
{
int ret = 0;
struct dmar_rmrr_unit *rmrru;
struct dmar_atsr_unit *atsru;
struct acpi_dmar_atsr *atsr;
struct acpi_dmar_reserved_memory *rmrr;
if (!intel_iommu_enabled && system_state != SYSTEM_BOOTING)
return 0;
list_for_each_entry(rmrru, &dmar_rmrr_units, list) {
rmrr = container_of(rmrru->hdr,
struct acpi_dmar_reserved_memory, header);
if (info->event == BUS_NOTIFY_ADD_DEVICE) {
ret = dmar_insert_dev_scope(info, (void *)(rmrr + 1),
((void *)rmrr) + rmrr->header.length,
rmrr->segment, rmrru->devices,
rmrru->devices_cnt);
if(ret < 0)
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
return ret;
} else if (info->event == BUS_NOTIFY_REMOVED_DEVICE) {
dmar_remove_dev_scope(info, rmrr->segment,
rmrru->devices, rmrru->devices_cnt);
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
}
}
list_for_each_entry(atsru, &dmar_atsr_units, list) {
if (atsru->include_all)
continue;
atsr = container_of(atsru->hdr, struct acpi_dmar_atsr, header);
if (info->event == BUS_NOTIFY_ADD_DEVICE) {
ret = dmar_insert_dev_scope(info, (void *)(atsr + 1),
(void *)atsr + atsr->header.length,
atsr->segment, atsru->devices,
atsru->devices_cnt);
if (ret > 0)
break;
else if(ret < 0)
return ret;
} else if (info->event == BUS_NOTIFY_REMOVED_DEVICE) {
iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-02-19 14:07:35 +08:00
if (dmar_remove_dev_scope(info, atsr->segment,
atsru->devices, atsru->devices_cnt))
break;
}
}
return 0;
}
/*
* Here we only respond to action of unbound device from driver.
*
* Added device is not attached to its DMAR domain here yet. That will happen
* when mapping the device to iova.
*/
static int device_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
struct dmar_domain *domain;
if (iommu_dummy(dev))
return 0;
if (action != BUS_NOTIFY_REMOVED_DEVICE)
return 0;
domain = find_domain(dev);
if (!domain)
return 0;
dmar_remove_one_dev_info(domain, dev);
if (!domain_type_is_vm_or_si(domain) && list_empty(&domain->devices))
domain_exit(domain);
return 0;
}
static struct notifier_block device_nb = {
.notifier_call = device_notifier,
};
static int intel_iommu_memory_notifier(struct notifier_block *nb,
unsigned long val, void *v)
{
struct memory_notify *mhp = v;
unsigned long long start, end;
unsigned long start_vpfn, last_vpfn;
switch (val) {
case MEM_GOING_ONLINE:
start = mhp->start_pfn << PAGE_SHIFT;
end = ((mhp->start_pfn + mhp->nr_pages) << PAGE_SHIFT) - 1;
if (iommu_domain_identity_map(si_domain, start, end)) {
pr_warn("Failed to build identity map for [%llx-%llx]\n",
start, end);
return NOTIFY_BAD;
}
break;
case MEM_OFFLINE:
case MEM_CANCEL_ONLINE:
start_vpfn = mm_to_dma_pfn(mhp->start_pfn);
last_vpfn = mm_to_dma_pfn(mhp->start_pfn + mhp->nr_pages - 1);
while (start_vpfn <= last_vpfn) {
struct iova *iova;
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
struct page *freelist;
iova = find_iova(&si_domain->iovad, start_vpfn);
if (iova == NULL) {
pr_debug("Failed get IOVA for PFN %lx\n",
start_vpfn);
break;
}
iova = split_and_remove_iova(&si_domain->iovad, iova,
start_vpfn, last_vpfn);
if (iova == NULL) {
pr_warn("Failed to split IOVA PFN [%lx-%lx]\n",
start_vpfn, last_vpfn);
return NOTIFY_BAD;
}
freelist = domain_unmap(si_domain, iova->pfn_lo,
iova->pfn_hi);
rcu_read_lock();
for_each_active_iommu(iommu, drhd)
iommu_flush_iotlb_psi(iommu, si_domain,
iova->pfn_lo, iova_size(iova),
!freelist, 0);
rcu_read_unlock();
dma_free_pagelist(freelist);
start_vpfn = iova->pfn_hi + 1;
free_iova_mem(iova);
}
break;
}
return NOTIFY_OK;
}
static struct notifier_block intel_iommu_memory_nb = {
.notifier_call = intel_iommu_memory_notifier,
.priority = 0
};
static void free_all_cpu_cached_iovas(unsigned int cpu)
{
int i;
for (i = 0; i < g_num_of_iommus; i++) {
struct intel_iommu *iommu = g_iommus[i];
struct dmar_domain *domain;
int did;
if (!iommu)
continue;
for (did = 0; did < cap_ndoms(iommu->cap); did++) {
domain = get_iommu_domain(iommu, (u16)did);
if (!domain)
continue;
free_cpu_cached_iovas(cpu, &domain->iovad);
}
}
}
static int intel_iommu_cpu_dead(unsigned int cpu)
{
free_all_cpu_cached_iovas(cpu);
flush_unmaps_timeout(cpu);
return 0;
}
static void intel_disable_iommus(void)
{
struct intel_iommu *iommu = NULL;
struct dmar_drhd_unit *drhd;
for_each_iommu(iommu, drhd)
iommu_disable_translation(iommu);
}
static inline struct intel_iommu *dev_to_intel_iommu(struct device *dev)
{
return container_of(dev, struct intel_iommu, iommu.dev);
}
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
static ssize_t intel_iommu_show_version(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
u32 ver = readl(iommu->reg + DMAR_VER_REG);
return sprintf(buf, "%d:%d\n",
DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver));
}
static DEVICE_ATTR(version, S_IRUGO, intel_iommu_show_version, NULL);
static ssize_t intel_iommu_show_address(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
return sprintf(buf, "%llx\n", iommu->reg_phys);
}
static DEVICE_ATTR(address, S_IRUGO, intel_iommu_show_address, NULL);
static ssize_t intel_iommu_show_cap(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
return sprintf(buf, "%llx\n", iommu->cap);
}
static DEVICE_ATTR(cap, S_IRUGO, intel_iommu_show_cap, NULL);
static ssize_t intel_iommu_show_ecap(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
return sprintf(buf, "%llx\n", iommu->ecap);
}
static DEVICE_ATTR(ecap, S_IRUGO, intel_iommu_show_ecap, NULL);
static ssize_t intel_iommu_show_ndoms(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
return sprintf(buf, "%ld\n", cap_ndoms(iommu->cap));
}
static DEVICE_ATTR(domains_supported, S_IRUGO, intel_iommu_show_ndoms, NULL);
static ssize_t intel_iommu_show_ndoms_used(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct intel_iommu *iommu = dev_to_intel_iommu(dev);
return sprintf(buf, "%d\n", bitmap_weight(iommu->domain_ids,
cap_ndoms(iommu->cap)));
}
static DEVICE_ATTR(domains_used, S_IRUGO, intel_iommu_show_ndoms_used, NULL);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
static struct attribute *intel_iommu_attrs[] = {
&dev_attr_version.attr,
&dev_attr_address.attr,
&dev_attr_cap.attr,
&dev_attr_ecap.attr,
&dev_attr_domains_supported.attr,
&dev_attr_domains_used.attr,
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
NULL,
};
static struct attribute_group intel_iommu_group = {
.name = "intel-iommu",
.attrs = intel_iommu_attrs,
};
const struct attribute_group *intel_iommu_groups[] = {
&intel_iommu_group,
NULL,
};
int __init intel_iommu_init(void)
{
int ret = -ENODEV;
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
/* VT-d is required for a TXT/tboot launch, so enforce that */
force_on = tboot_force_iommu();
2014-02-19 14:07:33 +08:00
if (iommu_init_mempool()) {
if (force_on)
panic("tboot: Failed to initialize iommu memory\n");
return -ENOMEM;
}
down_write(&dmar_global_lock);
if (dmar_table_init()) {
if (force_on)
panic("tboot: Failed to initialize DMAR table\n");
goto out_free_dmar;
}
if (dmar_dev_scope_init() < 0) {
if (force_on)
panic("tboot: Failed to initialize DMAR device scope\n");
goto out_free_dmar;
}
if (no_iommu || dmar_disabled) {
/*
* Make sure the IOMMUs are switched off, even when we
* boot into a kexec kernel and the previous kernel left
* them enabled
*/
intel_disable_iommus();
goto out_free_dmar;
}
if (list_empty(&dmar_rmrr_units))
pr_info("No RMRR found\n");
if (list_empty(&dmar_atsr_units))
pr_info("No ATSR found\n");
if (dmar_init_reserved_ranges()) {
if (force_on)
panic("tboot: Failed to reserve iommu ranges\n");
2014-02-19 14:07:33 +08:00
goto out_free_reserved_range;
}
init_no_remapping_devices();
ret = init_dmars();
if (ret) {
if (force_on)
panic("tboot: Failed to initialize DMARs\n");
pr_err("Initialization failed\n");
goto out_free_reserved_range;
}
2014-02-19 14:07:33 +08:00
up_write(&dmar_global_lock);
pr_info("Intel(R) Virtualization Technology for Directed I/O\n");
x86: Handle HW IOMMU initialization failure gracefully If HW IOMMU initialization fails (Intel VT-d often does this, typically due to BIOS bugs), we fall back to nommu. It doesn't work for the majority since nowadays we have more than 4GB memory so we must use swiotlb instead of nommu. The problem is that it's too late to initialize swiotlb when HW IOMMU initialization fails. We need to allocate swiotlb memory earlier from bootmem allocator. Chris explained the issue in detail: http://marc.info/?l=linux-kernel&m=125657444317079&w=2 The current x86 IOMMU initialization sequence is too complicated and handling the above issue makes it more hacky. This patch changes x86 IOMMU initialization sequence to handle the above issue cleanly. The new x86 IOMMU initialization sequence are: 1. we initialize the swiotlb (and setting swiotlb to 1) in the case of (max_pfn > MAX_DMA32_PFN && !no_iommu). dma_ops is set to swiotlb_dma_ops or nommu_dma_ops. if swiotlb usage is forced by the boot option, we finish here. 2. we call the detection functions of all the IOMMUs 3. the detection function sets x86_init.iommu.iommu_init to the IOMMU initialization function (so we can avoid calling the initialization functions of all the IOMMUs needlessly). 4. if the IOMMU initialization function doesn't need to swiotlb then sets swiotlb to zero (e.g. the initialization is sucessful). 5. if we find that swiotlb is set to zero, we free swiotlb resource. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: chrisw@sous-sol.org Cc: dwmw2@infradead.org Cc: joerg.roedel@amd.com Cc: muli@il.ibm.com LKML-Reference: <1257849980-22640-10-git-send-email-fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-10 18:46:20 +08:00
#ifdef CONFIG_SWIOTLB
swiotlb = 0;
#endif
dma_ops = &intel_dma_ops;
init_iommu_pm_ops();
for_each_active_iommu(iommu, drhd) {
iommu_device_sysfs_add(&iommu->iommu, NULL,
intel_iommu_groups,
"%s", iommu->name);
iommu_device_set_ops(&iommu->iommu, &intel_iommu_ops);
iommu_device_register(&iommu->iommu);
}
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
bus_set_iommu(&pci_bus_type, &intel_iommu_ops);
bus_register_notifier(&pci_bus_type, &device_nb);
if (si_domain && !hw_pass_through)
register_memory_notifier(&intel_iommu_memory_nb);
cpuhp_setup_state(CPUHP_IOMMU_INTEL_DEAD, "iommu/intel:dead", NULL,
intel_iommu_cpu_dead);
intel_iommu_enabled = 1;
return 0;
out_free_reserved_range:
put_iova_domain(&reserved_iova_list);
out_free_dmar:
intel_iommu_free_dmars();
2014-02-19 14:07:33 +08:00
up_write(&dmar_global_lock);
iommu_exit_mempool();
return ret;
}
static int domain_context_clear_one_cb(struct pci_dev *pdev, u16 alias, void *opaque)
{
struct intel_iommu *iommu = opaque;
domain_context_clear_one(iommu, PCI_BUS_NUM(alias), alias & 0xff);
return 0;
}
/*
* NB - intel-iommu lacks any sort of reference counting for the users of
* dependent devices. If multiple endpoints have intersecting dependent
* devices, unbinding the driver from any one of them will possibly leave
* the others unable to operate.
*/
static void domain_context_clear(struct intel_iommu *iommu, struct device *dev)
{
if (!iommu || !dev || !dev_is_pci(dev))
return;
pci_for_each_dma_alias(to_pci_dev(dev), &domain_context_clear_one_cb, iommu);
}
static void __dmar_remove_one_dev_info(struct device_domain_info *info)
{
struct intel_iommu *iommu;
unsigned long flags;
assert_spin_locked(&device_domain_lock);
if (WARN_ON(!info))
return;
iommu = info->iommu;
if (info->dev) {
iommu_disable_dev_iotlb(info);
domain_context_clear(iommu, info->dev);
}
unlink_domain_info(info);
spin_lock_irqsave(&iommu->lock, flags);
domain_detach_iommu(info->domain, iommu);
spin_unlock_irqrestore(&iommu->lock, flags);
free_devinfo_mem(info);
}
static void dmar_remove_one_dev_info(struct dmar_domain *domain,
struct device *dev)
{
struct device_domain_info *info;
unsigned long flags;
intel-iommu: Fix AB-BA lockdep report When unbinding a device so that I could pass it through to a KVM VM, I got the lockdep report below. It looks like a legitimate lock ordering problem: - domain_context_mapping_one() takes iommu->lock and calls iommu_support_dev_iotlb(), which takes device_domain_lock (inside iommu->lock). - domain_remove_one_dev_info() starts by taking device_domain_lock then takes iommu->lock inside it (near the end of the function). So this is the classic AB-BA deadlock. It looks like a safe fix is to simply release device_domain_lock a bit earlier, since as far as I can tell, it doesn't protect any of the stuff accessed at the end of domain_remove_one_dev_info() anyway. BTW, the use of device_domain_lock looks a bit unsafe to me... it's at least not obvious to me why we aren't vulnerable to the race below: iommu_support_dev_iotlb() domain_remove_dev_info() lock device_domain_lock find info unlock device_domain_lock lock device_domain_lock find same info unlock device_domain_lock free_devinfo_mem(info) do stuff with info after it's free However I don't understand the locking here well enough to know if this is a real problem, let alone what the best fix is. Anyway here's the full lockdep output that prompted all of this: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.39.1+ #1 ------------------------------------------------------- bash/13954 is trying to acquire lock: (&(&iommu->lock)->rlock){......}, at: [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230 but task is already holding lock: (device_domain_lock){-.-...}, at: [<ffffffff812f6508>] domain_remove_one_dev_info+0x208/0x230 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (device_domain_lock){-.-...}: [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130 [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffff812f8350>] domain_context_mapping_one+0x600/0x750 [<ffffffff812f84df>] domain_context_mapping+0x3f/0x120 [<ffffffff812f9175>] iommu_prepare_identity_map+0x1c5/0x1e0 [<ffffffff81ccf1ca>] intel_iommu_init+0x88e/0xb5e [<ffffffff81cab204>] pci_iommu_init+0x16/0x41 [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff81ca3d3f>] kernel_init+0xe3/0x168 [<ffffffff8157ac24>] kernel_thread_helper+0x4/0x10 -> #0 (&(&iommu->lock)->rlock){......}: [<ffffffff8109bf3e>] __lock_acquire+0x195e/0x1e10 [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130 [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230 [<ffffffff812f8b42>] device_notifier+0x72/0x90 [<ffffffff8157555c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089768>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff810897b6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff81373a5c>] __device_release_driver+0xbc/0xe0 [<ffffffff81373ccf>] device_release_driver+0x2f/0x50 [<ffffffff81372ee3>] driver_unbind+0xa3/0xc0 [<ffffffff813724ac>] drv_attr_store+0x2c/0x30 [<ffffffff811e4506>] sysfs_write_file+0xe6/0x170 [<ffffffff8117569e>] vfs_write+0xce/0x190 [<ffffffff811759e4>] sys_write+0x54/0xa0 [<ffffffff81579a82>] system_call_fastpath+0x16/0x1b other info that might help us debug this: 6 locks held by bash/13954: #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff811e4464>] sysfs_write_file+0x44/0x170 #1: (s_active#3){++++.+}, at: [<ffffffff811e44ed>] sysfs_write_file+0xcd/0x170 #2: (&__lockdep_no_validate__){+.+.+.}, at: [<ffffffff81372edb>] driver_unbind+0x9b/0xc0 #3: (&__lockdep_no_validate__){+.+.+.}, at: [<ffffffff81373cc7>] device_release_driver+0x27/0x50 #4: (&(&priv->bus_notifier)->rwsem){.+.+.+}, at: [<ffffffff8108974f>] __blocking_notifier_call_chain+0x5f/0xb0 #5: (device_domain_lock){-.-...}, at: [<ffffffff812f6508>] domain_remove_one_dev_info+0x208/0x230 stack backtrace: Pid: 13954, comm: bash Not tainted 2.6.39.1+ #1 Call Trace: [<ffffffff810993a7>] print_circular_bug+0xf7/0x100 [<ffffffff8109bf3e>] __lock_acquire+0x195e/0x1e10 [<ffffffff810972bd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109d57d>] ? trace_hardirqs_on_caller+0x13d/0x180 [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130 [<ffffffff812f6421>] ? domain_remove_one_dev_info+0x121/0x230 [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffff812f6421>] ? domain_remove_one_dev_info+0x121/0x230 [<ffffffff810972bd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230 [<ffffffff812f8b42>] device_notifier+0x72/0x90 [<ffffffff8157555c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089768>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff810897b6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff81373a5c>] __device_release_driver+0xbc/0xe0 [<ffffffff81373ccf>] device_release_driver+0x2f/0x50 [<ffffffff81372ee3>] driver_unbind+0xa3/0xc0 [<ffffffff813724ac>] drv_attr_store+0x2c/0x30 [<ffffffff811e4506>] sysfs_write_file+0xe6/0x170 [<ffffffff8117569e>] vfs_write+0xce/0x190 [<ffffffff811759e4>] sys_write+0x54/0xa0 [<ffffffff81579a82>] system_call_fastpath+0x16/0x1b Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-07-20 21:22:21 +08:00
spin_lock_irqsave(&device_domain_lock, flags);
info = dev->archdata.iommu;
__dmar_remove_one_dev_info(info);
spin_unlock_irqrestore(&device_domain_lock, flags);
}
static int md_domain_init(struct dmar_domain *domain, int guest_width)
{
int adjust_width;
init_iova_domain(&domain->iovad, VTD_PAGE_SIZE, IOVA_START_PFN,
DMA_32BIT_PFN);
domain_reserve_special_ranges(domain);
/* calculate AGAW */
domain->gaw = guest_width;
adjust_width = guestwidth_to_adjustwidth(guest_width);
domain->agaw = width_to_agaw(adjust_width);
domain->iommu_coherency = 0;
domain->iommu_snooping = 0;
intel-iommu: Enable super page (2MiB, 1GiB, etc.) support There are no externally-visible changes with this. In the loop in the internal __domain_mapping() function, we simply detect if we are mapping: - size >= 2MiB, and - virtual address aligned to 2MiB, and - physical address aligned to 2MiB, and - on hardware that supports superpages. (and likewise for larger superpages). We automatically use a superpage for such mappings. We never have to worry about *breaking* superpages, since we trust that we will always *unmap* the same range that was mapped. So all we need to do is ensure that dma_pte_clear_range() will also cope with superpages. Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so it can return a PTE at the appropriate level rather than always extending the page tables all the way down to level 1. Again, this is simplified by the fact that we should never encounter existing small pages when we're creating a mapping; any old mapping that used the same virtual range will have been entirely removed and its obsolete page tables freed. Provide an 'intel_iommu=sp_off' argument on the command line as a chicken bit. Not that it should ever be required. == The original commit seen in the iommu-2.6.git was Youquan's implementation (and completion) of my own half-baked code which I'd typed into an email. Followed by half a dozen subsequent 'fixes'. I've taken the unusual step of rewriting history and collapsing the original commits in order to keep the main history simpler, and make life easier for the people who are going to have to backport this to older kernels. And also so I can give it a more coherent commit comment which (hopefully) gives a better explanation of what's going on. The original sequence of commits leading to identical code was: Youquan Song (3): intel-iommu: super page support intel-iommu: Fix superpage alignment calculation error intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte() David Woodhouse (4): intel-iommu: Precalculate superpage support for dmar_domain intel-iommu: Fix hardware_largepage_caps() intel-iommu: Fix inappropriate use of superpages in __domain_mapping() intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-26 02:13:49 +08:00
domain->iommu_superpage = 0;
domain->max_addr = 0;
/* always allocate the top pgd */
domain->pgd = (struct dma_pte *)alloc_pgtable_page(domain->nid);
if (!domain->pgd)
return -ENOMEM;
domain_flush_cache(domain, domain->pgd, PAGE_SIZE);
return 0;
}
static struct iommu_domain *intel_iommu_domain_alloc(unsigned type)
{
struct dmar_domain *dmar_domain;
struct iommu_domain *domain;
if (type != IOMMU_DOMAIN_UNMANAGED)
return NULL;
dmar_domain = alloc_domain(DOMAIN_FLAG_VIRTUAL_MACHINE);
if (!dmar_domain) {
pr_err("Can't allocate dmar_domain\n");
return NULL;
}
if (md_domain_init(dmar_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) {
pr_err("Domain initialization failed\n");
domain_exit(dmar_domain);
return NULL;
}
domain_update_iommu_cap(dmar_domain);
domain = &dmar_domain->domain;
domain->geometry.aperture_start = 0;
domain->geometry.aperture_end = __DOMAIN_MAX_ADDR(dmar_domain->gaw);
domain->geometry.force_aperture = true;
return domain;
}
static void intel_iommu_domain_free(struct iommu_domain *domain)
{
domain_exit(to_dmar_domain(domain));
}
static int intel_iommu_attach_device(struct iommu_domain *domain,
struct device *dev)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
struct intel_iommu *iommu;
int addr_width;
u8 bus, devfn;
if (device_is_rmrr_locked(dev)) {
dev_warn(dev, "Device is ineligible for IOMMU domain attach due to platform RMRR requirement. Contact your platform vendor.\n");
return -EPERM;
}
/* normally dev is not mapped */
if (unlikely(domain_context_mapped(dev))) {
struct dmar_domain *old_domain;
old_domain = find_domain(dev);
if (old_domain) {
rcu_read_lock();
dmar_remove_one_dev_info(old_domain, dev);
rcu_read_unlock();
if (!domain_type_is_vm_or_si(old_domain) &&
list_empty(&old_domain->devices))
domain_exit(old_domain);
}
}
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return -ENODEV;
/* check if this iommu agaw is sufficient for max mapped address */
addr_width = agaw_to_width(iommu->agaw);
if (addr_width > cap_mgaw(iommu->cap))
addr_width = cap_mgaw(iommu->cap);
if (dmar_domain->max_addr > (1LL << addr_width)) {
pr_err("%s: iommu width (%d) is not "
"sufficient for the mapped address (%llx)\n",
__func__, addr_width, dmar_domain->max_addr);
return -EFAULT;
}
dmar_domain->gaw = addr_width;
/*
* Knock out extra levels of page tables if necessary
*/
while (iommu->agaw < dmar_domain->agaw) {
struct dma_pte *pte;
pte = dmar_domain->pgd;
if (dma_pte_present(pte)) {
dmar_domain->pgd = (struct dma_pte *)
phys_to_virt(dma_pte_addr(pte));
free_pgtable_page(pte);
}
dmar_domain->agaw--;
}
return domain_add_dev_info(dmar_domain, dev);
}
static void intel_iommu_detach_device(struct iommu_domain *domain,
struct device *dev)
{
dmar_remove_one_dev_info(to_dmar_domain(domain), dev);
}
static int intel_iommu_map(struct iommu_domain *domain,
unsigned long iova, phys_addr_t hpa,
size_t size, int iommu_prot)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
u64 max_addr;
int prot = 0;
int ret;
if (iommu_prot & IOMMU_READ)
prot |= DMA_PTE_READ;
if (iommu_prot & IOMMU_WRITE)
prot |= DMA_PTE_WRITE;
if ((iommu_prot & IOMMU_CACHE) && dmar_domain->iommu_snooping)
prot |= DMA_PTE_SNP;
max_addr = iova + size;
if (dmar_domain->max_addr < max_addr) {
u64 end;
/* check if minimum agaw is sufficient for mapped address */
end = __DOMAIN_MAX_ADDR(dmar_domain->gaw) + 1;
if (end < max_addr) {
pr_err("%s: iommu width (%d) is not "
"sufficient for the mapped address (%llx)\n",
__func__, dmar_domain->gaw, max_addr);
return -EFAULT;
}
dmar_domain->max_addr = max_addr;
}
/* Round up size to next multiple of PAGE_SIZE, if it and
the low bits of hpa would take us onto the next page */
size = aligned_nrpages(hpa, size);
ret = domain_pfn_mapping(dmar_domain, iova >> VTD_PAGE_SHIFT,
hpa >> VTD_PAGE_SHIFT, size, prot);
return ret;
}
static size_t intel_iommu_unmap(struct iommu_domain *domain,
unsigned long iova, size_t size)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
struct page *freelist = NULL;
struct intel_iommu *iommu;
unsigned long start_pfn, last_pfn;
unsigned int npages;
int iommu_id, level = 0;
/* Cope with horrid API which requires us to unmap more than the
size argument if it happens to be a large-page mapping. */
BUG_ON(!pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT, &level));
if (size < VTD_PAGE_SIZE << level_to_offset_bits(level))
size = VTD_PAGE_SIZE << level_to_offset_bits(level);
start_pfn = iova >> VTD_PAGE_SHIFT;
last_pfn = (iova + size - 1) >> VTD_PAGE_SHIFT;
freelist = domain_unmap(dmar_domain, start_pfn, last_pfn);
npages = last_pfn - start_pfn + 1;
for_each_domain_iommu(iommu_id, dmar_domain) {
iommu = g_iommus[iommu_id];
iommu_flush_iotlb_psi(g_iommus[iommu_id], dmar_domain,
start_pfn, npages, !freelist, 0);
}
dma_free_pagelist(freelist);
if (dmar_domain->max_addr == iova + size)
dmar_domain->max_addr = iova;
return size;
}
static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,
dma_addr_t iova)
{
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
struct dma_pte *pte;
int level = 0;
u64 phys = 0;
pte = pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT, &level);
if (pte)
phys = dma_pte_addr(pte);
return phys;
}
static bool intel_iommu_capable(enum iommu_cap cap)
{
if (cap == IOMMU_CAP_CACHE_COHERENCY)
return domain_update_iommu_snooping(NULL) == 1;
if (cap == IOMMU_CAP_INTR_REMAP)
return irq_remapping_enabled == 1;
return false;
}
static int intel_iommu_add_device(struct device *dev)
{
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
struct intel_iommu *iommu;
struct iommu_group *group;
u8 bus, devfn;
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return -ENODEV;
iommu_device_link(&iommu->iommu, dev);
group = iommu_group_get_for_dev(dev);
if (IS_ERR(group))
return PTR_ERR(group);
iommu_group_put(group);
return 0;
}
static void intel_iommu_remove_device(struct device *dev)
{
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
struct intel_iommu *iommu;
u8 bus, devfn;
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return;
iommu_group_remove_device(dev);
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-06-13 06:12:31 +08:00
iommu_device_unlink(&iommu->iommu, dev);
}
static void intel_iommu_get_resv_regions(struct device *device,
struct list_head *head)
{
struct iommu_resv_region *reg;
struct dmar_rmrr_unit *rmrr;
struct device *i_dev;
int i;
rcu_read_lock();
for_each_rmrr_units(rmrr) {
for_each_active_dev_scope(rmrr->devices, rmrr->devices_cnt,
i, i_dev) {
if (i_dev != device)
continue;
list_add_tail(&rmrr->resv->list, head);
}
}
rcu_read_unlock();
reg = iommu_alloc_resv_region(IOAPIC_RANGE_START,
IOAPIC_RANGE_END - IOAPIC_RANGE_START + 1,
0, IOMMU_RESV_RESERVED);
if (!reg)
return;
list_add_tail(&reg->list, head);
}
static void intel_iommu_put_resv_regions(struct device *dev,
struct list_head *head)
{
struct iommu_resv_region *entry, *next;
list_for_each_entry_safe(entry, next, head, list) {
if (entry->type == IOMMU_RESV_RESERVED)
kfree(entry);
}
}
#ifdef CONFIG_INTEL_IOMMU_SVM
#define MAX_NR_PASID_BITS (20)
static inline unsigned long intel_iommu_get_pts(struct intel_iommu *iommu)
{
/*
* Convert ecap_pss to extend context entry pts encoding, also
* respect the soft pasid_max value set by the iommu.
* - number of PASID bits = ecap_pss + 1
* - number of PASID table entries = 2^(pts + 5)
* Therefore, pts = ecap_pss - 4
* e.g. KBL ecap_pss = 0x13, PASID has 20 bits, pts = 15
*/
if (ecap_pss(iommu->ecap) < 5)
return 0;
/* pasid_max is encoded as actual number of entries not the bits */
return find_first_bit((unsigned long *)&iommu->pasid_max,
MAX_NR_PASID_BITS) - 5;
}
int intel_iommu_enable_pasid(struct intel_iommu *iommu, struct intel_svm_dev *sdev)
{
struct device_domain_info *info;
struct context_entry *context;
struct dmar_domain *domain;
unsigned long flags;
u64 ctx_lo;
int ret;
domain = get_valid_domain_for_dev(sdev->dev);
if (!domain)
return -EINVAL;
spin_lock_irqsave(&device_domain_lock, flags);
spin_lock(&iommu->lock);
ret = -EINVAL;
info = sdev->dev->archdata.iommu;
if (!info || !info->pasid_supported)
goto out;
context = iommu_context_addr(iommu, info->bus, info->devfn, 0);
if (WARN_ON(!context))
goto out;
ctx_lo = context[0].lo;
sdev->did = domain->iommu_did[iommu->seq_id];
sdev->sid = PCI_DEVID(info->bus, info->devfn);
if (!(ctx_lo & CONTEXT_PASIDE)) {
context[1].hi = (u64)virt_to_phys(iommu->pasid_state_table);
context[1].lo = (u64)virt_to_phys(iommu->pasid_table) |
intel_iommu_get_pts(iommu);
wmb();
/* CONTEXT_TT_MULTI_LEVEL and CONTEXT_TT_DEV_IOTLB are both
* extended to permit requests-with-PASID if the PASIDE bit
* is set. which makes sense. For CONTEXT_TT_PASS_THROUGH,
* however, the PASIDE bit is ignored and requests-with-PASID
* are unconditionally blocked. Which makes less sense.
* So convert from CONTEXT_TT_PASS_THROUGH to one of the new
* "guest mode" translation types depending on whether ATS
* is available or not. Annoyingly, we can't use the new
* modes *unless* PASIDE is set. */
if ((ctx_lo & CONTEXT_TT_MASK) == (CONTEXT_TT_PASS_THROUGH << 2)) {
ctx_lo &= ~CONTEXT_TT_MASK;
if (info->ats_supported)
ctx_lo |= CONTEXT_TT_PT_PASID_DEV_IOTLB << 2;
else
ctx_lo |= CONTEXT_TT_PT_PASID << 2;
}
ctx_lo |= CONTEXT_PASIDE;
if (iommu->pasid_state_table)
ctx_lo |= CONTEXT_DINVE;
if (info->pri_supported)
ctx_lo |= CONTEXT_PRS;
context[0].lo = ctx_lo;
wmb();
iommu->flush.flush_context(iommu, sdev->did, sdev->sid,
DMA_CCMD_MASK_NOBIT,
DMA_CCMD_DEVICE_INVL);
}
/* Enable PASID support in the device, if it wasn't already */
if (!info->pasid_enabled)
iommu_enable_dev_iotlb(info);
if (info->ats_enabled) {
sdev->dev_iotlb = 1;
sdev->qdep = info->ats_qdep;
if (sdev->qdep >= QI_DEV_EIOTLB_MAX_INVS)
sdev->qdep = 0;
}
ret = 0;
out:
spin_unlock(&iommu->lock);
spin_unlock_irqrestore(&device_domain_lock, flags);
return ret;
}
struct intel_iommu *intel_svm_device_to_iommu(struct device *dev)
{
struct intel_iommu *iommu;
u8 bus, devfn;
if (iommu_dummy(dev)) {
dev_warn(dev,
"No IOMMU translation for device; cannot enable SVM\n");
return NULL;
}
iommu = device_to_iommu(dev, &bus, &devfn);
if ((!iommu)) {
dev_err(dev, "No IOMMU for device; cannot enable SVM\n");
return NULL;
}
if (!iommu->pasid_table) {
dev_err(dev, "PASID not enabled on IOMMU; cannot enable SVM\n");
return NULL;
}
return iommu;
}
#endif /* CONFIG_INTEL_IOMMU_SVM */
const struct iommu_ops intel_iommu_ops = {
.capable = intel_iommu_capable,
.domain_alloc = intel_iommu_domain_alloc,
.domain_free = intel_iommu_domain_free,
.attach_dev = intel_iommu_attach_device,
.detach_dev = intel_iommu_detach_device,
.map = intel_iommu_map,
.unmap = intel_iommu_unmap,
.map_sg = default_iommu_map_sg,
.iova_to_phys = intel_iommu_iova_to_phys,
.add_device = intel_iommu_add_device,
.remove_device = intel_iommu_remove_device,
.get_resv_regions = intel_iommu_get_resv_regions,
.put_resv_regions = intel_iommu_put_resv_regions,
.device_group = pci_device_group,
.pgsize_bitmap = INTEL_IOMMU_PGSIZES,
};
static void quirk_iommu_g4x_gfx(struct pci_dev *dev)
{
/* G4x/GM45 integrated gfx dmar support is totally busted. */
pr_info("Disabling IOMMU for graphics on this chipset\n");
dmar_map_gfx = 0;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e10, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e20, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e30, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e40, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e90, quirk_iommu_g4x_gfx);
static void quirk_iommu_rwbf(struct pci_dev *dev)
{
/*
* Mobile 4 Series Chipset neglects to set RWBF capability,
* but needs it. Same seems to hold for the desktop versions.
*/
pr_info("Forcing write-buffer flush capability\n");
rwbf_quirk = 1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e10, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e20, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e30, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e40, quirk_iommu_rwbf);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e90, quirk_iommu_rwbf);
#define GGC 0x52
#define GGC_MEMORY_SIZE_MASK (0xf << 8)
#define GGC_MEMORY_SIZE_NONE (0x0 << 8)
#define GGC_MEMORY_SIZE_1M (0x1 << 8)
#define GGC_MEMORY_SIZE_2M (0x3 << 8)
#define GGC_MEMORY_VT_ENABLED (0x8 << 8)
#define GGC_MEMORY_SIZE_2M_VT (0x9 << 8)
#define GGC_MEMORY_SIZE_3M_VT (0xa << 8)
#define GGC_MEMORY_SIZE_4M_VT (0xb << 8)
static void quirk_calpella_no_shadow_gtt(struct pci_dev *dev)
{
unsigned short ggc;
if (pci_read_config_word(dev, GGC, &ggc))
return;
if (!(ggc & GGC_MEMORY_VT_ENABLED)) {
pr_info("BIOS has allocated no shadow GTT; disabling IOMMU for graphics\n");
dmar_map_gfx = 0;
} else if (dmar_map_gfx) {
/* we have to ensure the gfx device is idle before we flush */
pr_info("Disabling batched IOTLB flush on Ironlake\n");
intel_iommu_strict = 1;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_gtt);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0062, quirk_calpella_no_shadow_gtt);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x006a, quirk_calpella_no_shadow_gtt);
/* On Tylersburg chipsets, some BIOSes have been known to enable the
ISOCH DMAR unit for the Azalia sound device, but not give it any
TLB entries, which causes it to deadlock. Check for that. We do
this in a function called from init_dmars(), instead of in a PCI
quirk, because we don't want to print the obnoxious "BIOS broken"
message if VT-d is actually disabled.
*/
static void __init check_tylersburg_isoch(void)
{
struct pci_dev *pdev;
uint32_t vtisochctrl;
/* If there's no Azalia in the system anyway, forget it. */
pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x3a3e, NULL);
if (!pdev)
return;
pci_dev_put(pdev);
/* System Management Registers. Might be hidden, in which case
we can't do the sanity check. But that's OK, because the
known-broken BIOSes _don't_ actually hide it, so far. */
pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x342e, NULL);
if (!pdev)
return;
if (pci_read_config_dword(pdev, 0x188, &vtisochctrl)) {
pci_dev_put(pdev);
return;
}
pci_dev_put(pdev);
/* If Azalia DMA is routed to the non-isoch DMAR unit, fine. */
if (vtisochctrl & 1)
return;
/* Drop all bits other than the number of TLB entries */
vtisochctrl &= 0x1c;
/* If we have the recommended number of TLB entries (16), fine. */
if (vtisochctrl == 0x10)
return;
/* Zero TLB entries? You get to ride the short bus to school. */
if (!vtisochctrl) {
WARN(1, "Your BIOS is broken; DMA routed to ISOCH DMAR unit but no TLB space.\n"
"BIOS vendor: %s; Ver: %s; Product Version: %s\n",
dmi_get_system_info(DMI_BIOS_VENDOR),
dmi_get_system_info(DMI_BIOS_VERSION),
dmi_get_system_info(DMI_PRODUCT_VERSION));
iommu_identity_mapping |= IDENTMAP_AZALIA;
return;
}
pr_warn("Recommended TLB entries for ISOCH unit is 16; your BIOS set %d\n",
vtisochctrl);
}