OpenCloudOS-Kernel/drivers/i2c/busses/i2c-pasemi.c

419 lines
10 KiB
C
Raw Normal View History

/*
* Copyright (C) 2006-2007 PA Semi, Inc
*
* SMBus host driver for PA Semi PWRficient
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/i2c.h>
#include <linux/delay.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/io.h>
static struct pci_driver pasemi_smb_driver;
struct pasemi_smbus {
struct pci_dev *dev;
struct i2c_adapter adapter;
unsigned long base;
int size;
};
/* Register offsets */
#define REG_MTXFIFO 0x00
#define REG_MRXFIFO 0x04
#define REG_SMSTA 0x14
#define REG_CTL 0x1c
/* Register defs */
#define MTXFIFO_READ 0x00000400
#define MTXFIFO_STOP 0x00000200
#define MTXFIFO_START 0x00000100
#define MTXFIFO_DATA_M 0x000000ff
#define MRXFIFO_EMPTY 0x00000100
#define MRXFIFO_DATA_M 0x000000ff
#define SMSTA_XEN 0x08000000
#define SMSTA_MTN 0x00200000
#define CTL_MRR 0x00000400
#define CTL_MTR 0x00000200
#define CTL_CLK_M 0x000000ff
#define CLK_100K_DIV 84
#define CLK_400K_DIV 21
static inline void reg_write(struct pasemi_smbus *smbus, int reg, int val)
{
dev_dbg(&smbus->dev->dev, "smbus write reg %lx val %08x\n",
smbus->base + reg, val);
outl(val, smbus->base + reg);
}
static inline int reg_read(struct pasemi_smbus *smbus, int reg)
{
int ret;
ret = inl(smbus->base + reg);
dev_dbg(&smbus->dev->dev, "smbus read reg %lx val %08x\n",
smbus->base + reg, ret);
return ret;
}
#define TXFIFO_WR(smbus, reg) reg_write((smbus), REG_MTXFIFO, (reg))
#define RXFIFO_RD(smbus) reg_read((smbus), REG_MRXFIFO)
static void pasemi_smb_clear(struct pasemi_smbus *smbus)
{
unsigned int status;
status = reg_read(smbus, REG_SMSTA);
reg_write(smbus, REG_SMSTA, status);
}
static int pasemi_smb_waitready(struct pasemi_smbus *smbus)
{
int timeout = 10;
unsigned int status;
status = reg_read(smbus, REG_SMSTA);
while (!(status & SMSTA_XEN) && timeout--) {
msleep(1);
status = reg_read(smbus, REG_SMSTA);
}
/* Got NACK? */
if (status & SMSTA_MTN)
return -ENXIO;
if (timeout < 0) {
dev_warn(&smbus->dev->dev, "Timeout, status 0x%08x\n", status);
reg_write(smbus, REG_SMSTA, status);
return -ETIME;
}
/* Clear XEN */
reg_write(smbus, REG_SMSTA, SMSTA_XEN);
return 0;
}
static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter,
struct i2c_msg *msg, int stop)
{
struct pasemi_smbus *smbus = adapter->algo_data;
int read, i, err;
u32 rd;
read = msg->flags & I2C_M_RD ? 1 : 0;
TXFIFO_WR(smbus, MTXFIFO_START | i2c_8bit_addr_from_msg(msg));
if (read) {
TXFIFO_WR(smbus, msg->len | MTXFIFO_READ |
(stop ? MTXFIFO_STOP : 0));
err = pasemi_smb_waitready(smbus);
if (err)
goto reset_out;
for (i = 0; i < msg->len; i++) {
rd = RXFIFO_RD(smbus);
if (rd & MRXFIFO_EMPTY) {
err = -ENODATA;
goto reset_out;
}
msg->buf[i] = rd & MRXFIFO_DATA_M;
}
} else {
for (i = 0; i < msg->len - 1; i++)
TXFIFO_WR(smbus, msg->buf[i]);
TXFIFO_WR(smbus, msg->buf[msg->len-1] |
(stop ? MTXFIFO_STOP : 0));
}
return 0;
reset_out:
reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
(CLK_100K_DIV & CTL_CLK_M)));
return err;
}
static int pasemi_i2c_xfer(struct i2c_adapter *adapter,
struct i2c_msg *msgs, int num)
{
struct pasemi_smbus *smbus = adapter->algo_data;
int ret, i;
pasemi_smb_clear(smbus);
ret = 0;
for (i = 0; i < num && !ret; i++)
ret = pasemi_i2c_xfer_msg(adapter, &msgs[i], (i == (num - 1)));
return ret ? ret : num;
}
static int pasemi_smb_xfer(struct i2c_adapter *adapter,
u16 addr, unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data)
{
struct pasemi_smbus *smbus = adapter->algo_data;
unsigned int rd;
int read_flag, err;
int len = 0, i;
/* All our ops take 8-bit shifted addresses */
addr <<= 1;
read_flag = read_write == I2C_SMBUS_READ;
pasemi_smb_clear(smbus);
switch (size) {
case I2C_SMBUS_QUICK:
TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START |
MTXFIFO_STOP);
break;
case I2C_SMBUS_BYTE:
TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START);
if (read_write)
TXFIFO_WR(smbus, 1 | MTXFIFO_STOP | MTXFIFO_READ);
else
TXFIFO_WR(smbus, MTXFIFO_STOP | command);
break;
case I2C_SMBUS_BYTE_DATA:
TXFIFO_WR(smbus, addr | MTXFIFO_START);
TXFIFO_WR(smbus, command);
if (read_write) {
TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
TXFIFO_WR(smbus, 1 | MTXFIFO_READ | MTXFIFO_STOP);
} else {
TXFIFO_WR(smbus, MTXFIFO_STOP | data->byte);
}
break;
case I2C_SMBUS_WORD_DATA:
TXFIFO_WR(smbus, addr | MTXFIFO_START);
TXFIFO_WR(smbus, command);
if (read_write) {
TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
TXFIFO_WR(smbus, 2 | MTXFIFO_READ | MTXFIFO_STOP);
} else {
TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M);
TXFIFO_WR(smbus, MTXFIFO_STOP | (data->word >> 8));
}
break;
case I2C_SMBUS_BLOCK_DATA:
TXFIFO_WR(smbus, addr | MTXFIFO_START);
TXFIFO_WR(smbus, command);
if (read_write) {
TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
TXFIFO_WR(smbus, 1 | MTXFIFO_READ);
rd = RXFIFO_RD(smbus);
len = min_t(u8, (rd & MRXFIFO_DATA_M),
I2C_SMBUS_BLOCK_MAX);
TXFIFO_WR(smbus, len | MTXFIFO_READ |
MTXFIFO_STOP);
} else {
len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX);
TXFIFO_WR(smbus, len);
for (i = 1; i < len; i++)
TXFIFO_WR(smbus, data->block[i]);
TXFIFO_WR(smbus, data->block[len] | MTXFIFO_STOP);
}
break;
case I2C_SMBUS_PROC_CALL:
read_write = I2C_SMBUS_READ;
TXFIFO_WR(smbus, addr | MTXFIFO_START);
TXFIFO_WR(smbus, command);
TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M);
TXFIFO_WR(smbus, (data->word >> 8) & MTXFIFO_DATA_M);
TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
TXFIFO_WR(smbus, 2 | MTXFIFO_STOP | MTXFIFO_READ);
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX - 1);
read_write = I2C_SMBUS_READ;
TXFIFO_WR(smbus, addr | MTXFIFO_START);
TXFIFO_WR(smbus, command);
TXFIFO_WR(smbus, len);
for (i = 1; i <= len; i++)
TXFIFO_WR(smbus, data->block[i]);
TXFIFO_WR(smbus, addr | I2C_SMBUS_READ);
TXFIFO_WR(smbus, MTXFIFO_READ | 1);
rd = RXFIFO_RD(smbus);
len = min_t(u8, (rd & MRXFIFO_DATA_M),
I2C_SMBUS_BLOCK_MAX - len);
TXFIFO_WR(smbus, len | MTXFIFO_READ | MTXFIFO_STOP);
break;
default:
dev_warn(&adapter->dev, "Unsupported transaction %d\n", size);
return -EINVAL;
}
err = pasemi_smb_waitready(smbus);
if (err)
goto reset_out;
if (read_write == I2C_SMBUS_WRITE)
return 0;
switch (size) {
case I2C_SMBUS_BYTE:
case I2C_SMBUS_BYTE_DATA:
rd = RXFIFO_RD(smbus);
if (rd & MRXFIFO_EMPTY) {
err = -ENODATA;
goto reset_out;
}
data->byte = rd & MRXFIFO_DATA_M;
break;
case I2C_SMBUS_WORD_DATA:
case I2C_SMBUS_PROC_CALL:
rd = RXFIFO_RD(smbus);
if (rd & MRXFIFO_EMPTY) {
err = -ENODATA;
goto reset_out;
}
data->word = rd & MRXFIFO_DATA_M;
rd = RXFIFO_RD(smbus);
if (rd & MRXFIFO_EMPTY) {
err = -ENODATA;
goto reset_out;
}
data->word |= (rd & MRXFIFO_DATA_M) << 8;
break;
case I2C_SMBUS_BLOCK_DATA:
case I2C_SMBUS_BLOCK_PROC_CALL:
data->block[0] = len;
for (i = 1; i <= len; i ++) {
rd = RXFIFO_RD(smbus);
if (rd & MRXFIFO_EMPTY) {
err = -ENODATA;
goto reset_out;
}
data->block[i] = rd & MRXFIFO_DATA_M;
}
break;
}
return 0;
reset_out:
reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
(CLK_100K_DIV & CTL_CLK_M)));
return err;
}
static u32 pasemi_smb_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_I2C;
}
static const struct i2c_algorithm smbus_algorithm = {
.master_xfer = pasemi_i2c_xfer,
.smbus_xfer = pasemi_smb_xfer,
.functionality = pasemi_smb_func,
};
static int pasemi_smb_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct pasemi_smbus *smbus;
int error;
if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO))
return -ENODEV;
smbus = kzalloc(sizeof(struct pasemi_smbus), GFP_KERNEL);
if (!smbus)
return -ENOMEM;
smbus->dev = dev;
smbus->base = pci_resource_start(dev, 0);
smbus->size = pci_resource_len(dev, 0);
if (!request_region(smbus->base, smbus->size,
pasemi_smb_driver.name)) {
error = -EBUSY;
goto out_kfree;
}
smbus->adapter.owner = THIS_MODULE;
snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
"PA Semi SMBus adapter at 0x%lx", smbus->base);
smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
smbus->adapter.nr = PCI_FUNC(dev->devfn);
/* set up the sysfs linkage to our parent device */
smbus->adapter.dev.parent = &dev->dev;
reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
(CLK_100K_DIV & CTL_CLK_M)));
error = i2c_add_numbered_adapter(&smbus->adapter);
if (error)
goto out_release_region;
pci_set_drvdata(dev, smbus);
return 0;
out_release_region:
release_region(smbus->base, smbus->size);
out_kfree:
kfree(smbus);
return error;
}
static void pasemi_smb_remove(struct pci_dev *dev)
{
struct pasemi_smbus *smbus = pci_get_drvdata(dev);
i2c_del_adapter(&smbus->adapter);
release_region(smbus->base, smbus->size);
kfree(smbus);
}
static const struct pci_device_id pasemi_smb_ids[] = {
{ PCI_DEVICE(0x1959, 0xa003) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, pasemi_smb_ids);
static struct pci_driver pasemi_smb_driver = {
.name = "i2c-pasemi",
.id_table = pasemi_smb_ids,
.probe = pasemi_smb_probe,
.remove = pasemi_smb_remove,
};
module_pci_driver(pasemi_smb_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
MODULE_DESCRIPTION("PA Semi PWRficient SMBus driver");