UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/linux/pci_ids.h

3113 lines
120 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* PCI Class, Vendor and Device IDs
*
* Please keep sorted.
PCI: Document pci_ids.h addition policy. IDs should generally only be added to pci_ids.h when they're shared across several files in the tree. IDs that are just used by a single driver should be defined in the driver instead. Perhaps documenting this is a good idea to prevent things being moved there, as it still seems to be happening judging from the git log. (based on discussion w/gregkh and others). Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-07 03:13:59 +08:00
*
* Do not add new entries to this file unless the definitions
* are shared between multiple drivers.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
PCI: Add include guard to include/linux/pci_ids.h Adding an include guard frees the preprocessor from reparsing over 2600 #defines in the cases where pci_ids.h is somehow included more than once. This gives a tiny-but-measurable performance improvement when compiling such files. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-10 20:05:11 +08:00
#ifndef _LINUX_PCI_IDS_H
#define _LINUX_PCI_IDS_H
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Device classes and subclasses */
#define PCI_CLASS_NOT_DEFINED 0x0000
#define PCI_CLASS_NOT_DEFINED_VGA 0x0001
#define PCI_BASE_CLASS_STORAGE 0x01
#define PCI_CLASS_STORAGE_SCSI 0x0100
#define PCI_CLASS_STORAGE_IDE 0x0101
#define PCI_CLASS_STORAGE_FLOPPY 0x0102
#define PCI_CLASS_STORAGE_IPI 0x0103
#define PCI_CLASS_STORAGE_RAID 0x0104
Add pci class code for SATA & AHCI, and replace some magic numbers. Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-09 18:32:51 +08:00
#define PCI_CLASS_STORAGE_SATA 0x0106
#define PCI_CLASS_STORAGE_SATA_AHCI 0x010601
[SCSI] pci_ids.h: add subclass code for SAS Controllers Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-02 07:51:02 +08:00
#define PCI_CLASS_STORAGE_SAS 0x0107
nvme: move NVMe class code to pci_ids.h We'll need to check for it in the AHCI drivers (yes, really) soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-12-03 02:31:01 +08:00
#define PCI_CLASS_STORAGE_EXPRESS 0x010802
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_CLASS_STORAGE_OTHER 0x0180
nvme: move NVMe class code to pci_ids.h We'll need to check for it in the AHCI drivers (yes, really) soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-12-03 02:31:01 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_BASE_CLASS_NETWORK 0x02
#define PCI_CLASS_NETWORK_ETHERNET 0x0200
#define PCI_CLASS_NETWORK_TOKEN_RING 0x0201
#define PCI_CLASS_NETWORK_FDDI 0x0202
#define PCI_CLASS_NETWORK_ATM 0x0203
#define PCI_CLASS_NETWORK_OTHER 0x0280
#define PCI_BASE_CLASS_DISPLAY 0x03
#define PCI_CLASS_DISPLAY_VGA 0x0300
#define PCI_CLASS_DISPLAY_XGA 0x0301
#define PCI_CLASS_DISPLAY_3D 0x0302
#define PCI_CLASS_DISPLAY_OTHER 0x0380
#define PCI_BASE_CLASS_MULTIMEDIA 0x04
#define PCI_CLASS_MULTIMEDIA_VIDEO 0x0400
#define PCI_CLASS_MULTIMEDIA_AUDIO 0x0401
#define PCI_CLASS_MULTIMEDIA_PHONE 0x0402
vga_switcheroo: Use device link for HDA controller Back in 2013, runtime PM for GPUs with integrated HDA controller was introduced with commits 0d69704ae348 ("gpu/vga_switcheroo: add driver control power feature. (v3)") and 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)"). Briefly, the idea was that the HDA controller is forced on and off in unison with the GPU. The original code is mostly still in place even though it was never a 100% perfect solution: E.g. on access to the HDA controller, the GPU is powered up via vga_switcheroo_runtime_resume_hdmi_audio() but there are no provisions to keep it resumed until access to the HDA controller has ceased: The GPU autosuspends after 5 seconds, rendering the HDA controller inaccessible. Additionally, a kludge is required when hda_intel.c probes: It has to check whether the GPU is powered down (check_hdmi_disabled()) and defer probing if so. However in the meantime (in v4.10) the driver core has gained a feature called device links which promises to solve such issues in a clean way: It allows us to declare a dependency from the HDA controller (consumer) to the GPU (supplier). The PM core then automagically ensures that the GPU is runtime resumed as long as the HDA controller's ->probe hook is executed and whenever the HDA controller is accessed. By default, the HDA controller has a dependency on its parent, a PCIe Root Port. Adding a device link creates another dependency on its sibling: PCIe Root Port ^ ^ | | | | HDA ===> GPU The device link is not only used for runtime PM, it also guarantees that on system sleep, the HDA controller suspends before the GPU and resumes after the GPU, and on system shutdown the HDA controller's ->shutdown hook is executed before the one of the GPU. It is a complete solution. Using this functionality is as simple as calling device_link_add(), which results in a dmesg entry like this: pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 The code for the GPU-governed audio power management can thus be removed (except where it's still needed for legacy manual power control). The device link is added in a PCI quirk rather than in hda_intel.c. It is therefore legal for the GPU to runtime suspend to D3cold even if the HDA controller is not bound to a driver or if CONFIG_SND_HDA_INTEL is not enabled, for accesses to the HDA controller will cause the GPU to wake up regardless if they're occurring outside of hda_intel.c (think config space readout via sysfs). Contrary to the previous implementation, the HDA controller's power state is now self-governed, rather than GPU-governed, whereas the GPU's power state is no longer fully self-governed. (The HDA controller needs to runtime suspend before the GPU can.) It is thus crucial that runtime PM is always activated on the HDA controller even if CONFIG_SND_HDA_POWER_SAVE_DEFAULT is set to 0 (which is the default), lest the GPU stays awake. This is achieved by setting the auto_runtime_pm flag on every codec and the AZX_DCAPS_PM_RUNTIME flag on the HDA controller. A side effect is that power consumption might be reduced if the GPU is in use but the HDA controller is not, because the HDA controller is now allowed to go to D3hot. Before, it was forced to stay in D0 as long as the GPU was in use. (There is no reduction in power consumption on my Nvidia GK107, but there might be on other chips.) The code paths for legacy manual power control are adjusted such that runtime PM is disabled during power off, thereby preventing the PM core from resuming the HDA controller. Note that the device link is not only added on vga_switcheroo capable systems, but for *any* GPU with integrated HDA controller. The idea is that the HDA controller streams audio via connectors located on the GPU, so the GPU needs to be on for the HDA controller to do anything useful. This commit implicitly fixes an unbalanced runtime PM ref upon unbind of hda_intel.c: On ->probe, a runtime PM ref was previously released under the condition "azx_has_pm_runtime(chip) || hda->use_vga_switcheroo", but on ->remove a runtime PM ref was only acquired under the first of those conditions. Thus, binding and unbinding the driver twice on a vga_switcheroo capable system caused the runtime PM refcount to drop below zero. The issue is resolved because the AZX_DCAPS_PM_RUNTIME flag is now always set if use_vga_switcheroo is true. For more information on device links please refer to: https://www.kernel.org/doc/html/latest/driver-api/device_link.html Documentation/driver-api/device_link.rst Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Tested-by: Kai Heng Feng <kai.heng.feng@canonical.com> # AMD PowerXpress Tested-by: Mike Lothian <mike@fireburn.co.uk> # AMD PowerXpress Tested-by: Denis Lisov <dennis.lissov@gmail.com> # Nvidia Optimus Tested-by: Peter Wu <peter@lekensteyn.nl> # Nvidia Optimus Tested-by: Lukas Wunner <lukas@wunner.de> # MacBook Pro Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/51bd38360ff502a8c42b1ebf4405ee1d3f27118d.1520068884.git.lukas@wunner.de
2018-03-03 17:53:24 +08:00
#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_CLASS_MULTIMEDIA_OTHER 0x0480
#define PCI_BASE_CLASS_MEMORY 0x05
#define PCI_CLASS_MEMORY_RAM 0x0500
#define PCI_CLASS_MEMORY_FLASH 0x0501
cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints The CXL.mem protocol allows a device to act as a provider of "System RAM" and/or "Persistent Memory" that is fully coherent as if the memory was attached to the typical CPU memory controller. With the CXL-2.0 specification a PCI endpoint can implement a "Type-3" device interface and give the operating system control over "Host Managed Device Memory". See section 2.3 Type 3 CXL Device. The memory range exported by the device may optionally be described by the platform firmware memory map, or by infrastructure like LIBNVDIMM to provision persistent memory capacity from one, or more, CXL.mem devices. A pre-requisite for Linux-managed memory-capacity provisioning is this cxl_mem driver that can speak the mailbox protocol defined in section 8.2.8.4 Mailbox Registers. For now just land the initial driver boiler-plate and Documentation/ infrastructure. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: David Rientjes <rientjes@google.com> (v1) Cc: Jonathan Corbet <corbet@lwn.net> Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-17 12:09:50 +08:00
#define PCI_CLASS_MEMORY_CXL 0x0502
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_CLASS_MEMORY_OTHER 0x0580
#define PCI_BASE_CLASS_BRIDGE 0x06
#define PCI_CLASS_BRIDGE_HOST 0x0600
#define PCI_CLASS_BRIDGE_ISA 0x0601
#define PCI_CLASS_BRIDGE_EISA 0x0602
#define PCI_CLASS_BRIDGE_MC 0x0603
#define PCI_CLASS_BRIDGE_PCI 0x0604
#define PCI_CLASS_BRIDGE_PCMCIA 0x0605
#define PCI_CLASS_BRIDGE_NUBUS 0x0606
#define PCI_CLASS_BRIDGE_CARDBUS 0x0607
#define PCI_CLASS_BRIDGE_RACEWAY 0x0608
#define PCI_CLASS_BRIDGE_OTHER 0x0680
#define PCI_BASE_CLASS_COMMUNICATION 0x07
#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700
#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
#define PCI_CLASS_COMMUNICATION_MODEM 0x0703
#define PCI_CLASS_COMMUNICATION_OTHER 0x0780
#define PCI_BASE_CLASS_SYSTEM 0x08
#define PCI_CLASS_SYSTEM_PIC 0x0800
[PATCH] ACPI based I/O APIC hot-plug: acpiphp support This patch adds PCI based I/O xAPIC hot-add support to ACPIPHP driver. When PCI root bridge is hot-added, all PCI based I/O xAPICs under the root bridge are hot-added by this patch. Hot-remove support is TBD. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-28 15:25:59 +08:00
#define PCI_CLASS_SYSTEM_PIC_IOAPIC 0x080010
#define PCI_CLASS_SYSTEM_PIC_IOXAPIC 0x080020
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_CLASS_SYSTEM_DMA 0x0801
#define PCI_CLASS_SYSTEM_TIMER 0x0802
#define PCI_CLASS_SYSTEM_RTC 0x0803
#define PCI_CLASS_SYSTEM_PCI_HOTPLUG 0x0804
[PATCH] Secure Digital Host Controller id and regs Class code and register definitions for the Secure Digital Host Controller standard. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 19:18:16 +08:00
#define PCI_CLASS_SYSTEM_SDHCI 0x0805
PCI/ERR: Bind RCEC devices to the Root Port driver If a Root Complex Integrated Endpoint (RCiEP) is implemented, it may signal errors through a Root Complex Event Collector (RCEC). Each RCiEP must be associated with no more than one RCEC. For an RCEC (which is technically not a Bridge), error messages "received" from associated RCiEPs must be enabled for "transmission" in order to cause a System Error via the Root Control register or (when the Advanced Error Reporting Capability is present) reporting via the Root Error Command register and logging in the Root Error Status register and Error Source Identification register. Given the commonality with Root Ports and the need to also support AER and PME services for RCECs, extend the Root Port driver to support RCEC devices by adding the RCEC Class ID to the driver structure. Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-3-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-11-21 08:10:23 +08:00
#define PCI_CLASS_SYSTEM_RCEC 0x0807
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_CLASS_SYSTEM_OTHER 0x0880
#define PCI_BASE_CLASS_INPUT 0x09
#define PCI_CLASS_INPUT_KEYBOARD 0x0900
#define PCI_CLASS_INPUT_PEN 0x0901
#define PCI_CLASS_INPUT_MOUSE 0x0902
#define PCI_CLASS_INPUT_SCANNER 0x0903
#define PCI_CLASS_INPUT_GAMEPORT 0x0904
#define PCI_CLASS_INPUT_OTHER 0x0980
#define PCI_BASE_CLASS_DOCKING 0x0a
#define PCI_CLASS_DOCKING_GENERIC 0x0a00
#define PCI_CLASS_DOCKING_OTHER 0x0a80
#define PCI_BASE_CLASS_PROCESSOR 0x0b
#define PCI_CLASS_PROCESSOR_386 0x0b00
#define PCI_CLASS_PROCESSOR_486 0x0b01
#define PCI_CLASS_PROCESSOR_PENTIUM 0x0b02
#define PCI_CLASS_PROCESSOR_ALPHA 0x0b10
#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20
#define PCI_CLASS_PROCESSOR_MIPS 0x0b30
#define PCI_CLASS_PROCESSOR_CO 0x0b40
#define PCI_BASE_CLASS_SERIAL 0x0c
#define PCI_CLASS_SERIAL_FIREWIRE 0x0c00
Add PCI class ID for firewire OHCI controllers. Pull this define out of drivers/ieee1394/ohci1394.c and rename to match other PCI class defines. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-18 03:34:09 +08:00
#define PCI_CLASS_SERIAL_FIREWIRE_OHCI 0x0c0010
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_CLASS_SERIAL_ACCESS 0x0c01
#define PCI_CLASS_SERIAL_SSA 0x0c02
#define PCI_CLASS_SERIAL_USB 0x0c03
[PATCH] USB: Always do usb-handoff This revised patch (as586b) makes usb-handoff permanently true and no longer a kernel boot parameter. It also removes the piix3_usb quirk code; that was nothing more than an early version of the USB handoff code (written at a time when Intel's PIIX3 was about the only motherboard with USB support). And it adds identifiers for the three PCI USB controller classes to pci_ids.h. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-20 00:52:02 +08:00
#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300
#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310
#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 10:52:28 +08:00
#define PCI_CLASS_SERIAL_USB_XHCI 0x0c0330
PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI-SIG has defined Interface FEh for Base Class 0Ch, Sub-Class 03h as "USB Device (not host controller)". It is already being used in various USB device controller drivers for matching, so add PCI_CLASS_SERIAL_USB_DEVICE and use it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-15 20:06:00 +08:00
#define PCI_CLASS_SERIAL_USB_DEVICE 0x0c03fe
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_CLASS_SERIAL_FIBER 0x0c04
#define PCI_CLASS_SERIAL_SMBUS 0x0c05
pci:ipmi: Move IPMI PCI class id defines to pci_ids.h Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2018-02-27 02:49:16 +08:00
#define PCI_CLASS_SERIAL_IPMI 0x0c07
#define PCI_CLASS_SERIAL_IPMI_SMIC 0x0c0700
#define PCI_CLASS_SERIAL_IPMI_KCS 0x0c0701
#define PCI_CLASS_SERIAL_IPMI_BT 0x0c0702
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci: add class codes for Wireless RF controllers pci: add class codes for Wireless RF controllers Add PCI codes to include/linux/pci_ids.h for RF controllers; first batch of these devices seem to be the Ultra-Wide-Band and Wireless USB controllers (WHCI spec). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 07:58:58 +08:00
#define PCI_BASE_CLASS_WIRELESS 0x0d
#define PCI_CLASS_WIRELESS_RF_CONTROLLER 0x0d10
#define PCI_CLASS_WIRELESS_WHCI 0x0d1010
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_BASE_CLASS_INTELLIGENT 0x0e
#define PCI_CLASS_INTELLIGENT_I2O 0x0e00
#define PCI_BASE_CLASS_SATELLITE 0x0f
#define PCI_CLASS_SATELLITE_TV 0x0f00
#define PCI_CLASS_SATELLITE_AUDIO 0x0f01
#define PCI_CLASS_SATELLITE_VOICE 0x0f03
#define PCI_CLASS_SATELLITE_DATA 0x0f04
#define PCI_BASE_CLASS_CRYPT 0x10
#define PCI_CLASS_CRYPT_NETWORK 0x1000
#define PCI_CLASS_CRYPT_ENTERTAINMENT 0x1001
#define PCI_CLASS_CRYPT_OTHER 0x1080
#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
#define PCI_CLASS_SP_DPIO 0x1100
#define PCI_CLASS_SP_OTHER 0x1180
#define PCI_CLASS_OTHERS 0xff
/* Vendors and devices. Sort key: vendor first, device next. */
PCI: Add Loongson vendor ID Add the Loongson vendor ID to pci_ids.h to be used by the controller driver in the future. The Loongson vendor ID can be found at the following link: https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git/tree/pci.ids Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-10 20:50:07 +08:00
#define PCI_VENDOR_ID_LOONGSON 0x0014
PCI: pci_ids, reorder some entries pci_ids, reorder some entries Some lines are not vendor sorted, reorder it to comply with the rest of document. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-18 16:55:30 +08:00
#define PCI_VENDOR_ID_TTTECH 0x0357
#define PCI_DEVICE_ID_TTTECH_MC322 0x000a
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_DYNALINK 0x0675
#define PCI_DEVICE_ID_DYNALINK_IS64PH 0x1702
PCI: Add Ubiquiti Networks vendor ID Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Tobias Schramm <tobleminer@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-30 20:06:02 +08:00
#define PCI_VENDOR_ID_UBIQUITI 0x0777
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_BERKOM 0x0871
#define PCI_DEVICE_ID_BERKOM_A1T 0xffa1
#define PCI_DEVICE_ID_BERKOM_T_CONCEPT 0xffa2
#define PCI_DEVICE_ID_BERKOM_A4T 0xffa4
#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO 0xffa8
#define PCI_VENDOR_ID_COMPAQ 0x0e11
#define PCI_DEVICE_ID_COMPAQ_TOKENRING 0x0508
#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc
#define PCI_DEVICE_ID_COMPAQ_SMART2P 0xae10
#define PCI_DEVICE_ID_COMPAQ_NETEL100 0xae32
#define PCI_DEVICE_ID_COMPAQ_NETEL10 0xae34
#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33
#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I 0xae35
#define PCI_DEVICE_ID_COMPAQ_NETEL100D 0xae40
#define PCI_DEVICE_ID_COMPAQ_NETEL100PI 0xae43
#define PCI_DEVICE_ID_COMPAQ_NETEL100I 0xb011
#define PCI_DEVICE_ID_COMPAQ_CISS 0xb060
#define PCI_DEVICE_ID_COMPAQ_CISSB 0xb178
#define PCI_DEVICE_ID_COMPAQ_CISSC 0x46
#define PCI_DEVICE_ID_COMPAQ_THUNDER 0xf130
#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B 0xf150
#define PCI_VENDOR_ID_NCR 0x1000
#define PCI_VENDOR_ID_LSI_LOGIC 0x1000
#define PCI_DEVICE_ID_NCR_53C810 0x0001
#define PCI_DEVICE_ID_NCR_53C820 0x0002
#define PCI_DEVICE_ID_NCR_53C825 0x0003
#define PCI_DEVICE_ID_NCR_53C815 0x0004
#define PCI_DEVICE_ID_LSI_53C810AP 0x0005
#define PCI_DEVICE_ID_NCR_53C860 0x0006
#define PCI_DEVICE_ID_LSI_53C1510 0x000a
#define PCI_DEVICE_ID_NCR_53C896 0x000b
#define PCI_DEVICE_ID_NCR_53C895 0x000c
#define PCI_DEVICE_ID_NCR_53C885 0x000d
#define PCI_DEVICE_ID_NCR_53C875 0x000f
#define PCI_DEVICE_ID_NCR_53C1510 0x0010
#define PCI_DEVICE_ID_LSI_53C895A 0x0012
#define PCI_DEVICE_ID_LSI_53C875A 0x0013
#define PCI_DEVICE_ID_LSI_53C1010_33 0x0020
#define PCI_DEVICE_ID_LSI_53C1010_66 0x0021
#define PCI_DEVICE_ID_LSI_53C1030 0x0030
#define PCI_DEVICE_ID_LSI_1030_53C1035 0x0032
#define PCI_DEVICE_ID_LSI_53C1035 0x0040
#define PCI_DEVICE_ID_NCR_53C875J 0x008f
#define PCI_DEVICE_ID_LSI_FC909 0x0621
#define PCI_DEVICE_ID_LSI_FC929 0x0622
#define PCI_DEVICE_ID_LSI_FC929_LAN 0x0623
#define PCI_DEVICE_ID_LSI_FC919 0x0624
#define PCI_DEVICE_ID_LSI_FC919_LAN 0x0625
#define PCI_DEVICE_ID_LSI_FC929X 0x0626
#define PCI_DEVICE_ID_LSI_FC939X 0x0642
#define PCI_DEVICE_ID_LSI_FC949X 0x0640
[SCSI] fusion - adding support for FC949ES Add software recognition for the new LSI Logic Fibre Channel controller. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 07:25:26 +08:00
#define PCI_DEVICE_ID_LSI_FC949ES 0x0646
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_LSI_FC919X 0x0628
#define PCI_DEVICE_ID_NCR_YELLOWFIN 0x0701
#define PCI_DEVICE_ID_LSI_61C102 0x0901
#define PCI_DEVICE_ID_LSI_63C815 0x1000
#define PCI_DEVICE_ID_LSI_SAS1064 0x0050
[SCSI] MegaRAID SAS RAID: new driver Signed-off-by: Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-21 05:46:58 +08:00
#define PCI_DEVICE_ID_LSI_SAS1064R 0x0411
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_LSI_SAS1066 0x005E
#define PCI_DEVICE_ID_LSI_SAS1068 0x0054
#define PCI_DEVICE_ID_LSI_SAS1064A 0x005C
#define PCI_DEVICE_ID_LSI_SAS1064E 0x0056
#define PCI_DEVICE_ID_LSI_SAS1066E 0x005A
#define PCI_DEVICE_ID_LSI_SAS1068E 0x0058
#define PCI_DEVICE_ID_LSI_SAS1078 0x0060
#define PCI_VENDOR_ID_ATI 0x1002
/* Mach64 */
#define PCI_DEVICE_ID_ATI_68800 0x4158
#define PCI_DEVICE_ID_ATI_215CT222 0x4354
#define PCI_DEVICE_ID_ATI_210888CX 0x4358
#define PCI_DEVICE_ID_ATI_215ET222 0x4554
/* Mach64 / Rage */
#define PCI_DEVICE_ID_ATI_215GB 0x4742
#define PCI_DEVICE_ID_ATI_215GD 0x4744
#define PCI_DEVICE_ID_ATI_215GI 0x4749
#define PCI_DEVICE_ID_ATI_215GP 0x4750
#define PCI_DEVICE_ID_ATI_215GQ 0x4751
#define PCI_DEVICE_ID_ATI_215XL 0x4752
#define PCI_DEVICE_ID_ATI_215GT 0x4754
#define PCI_DEVICE_ID_ATI_215GTB 0x4755
#define PCI_DEVICE_ID_ATI_215_IV 0x4756
#define PCI_DEVICE_ID_ATI_215_IW 0x4757
#define PCI_DEVICE_ID_ATI_215_IZ 0x475A
#define PCI_DEVICE_ID_ATI_210888GX 0x4758
#define PCI_DEVICE_ID_ATI_215_LB 0x4c42
#define PCI_DEVICE_ID_ATI_215_LD 0x4c44
#define PCI_DEVICE_ID_ATI_215_LG 0x4c47
#define PCI_DEVICE_ID_ATI_215_LI 0x4c49
#define PCI_DEVICE_ID_ATI_215_LM 0x4c4D
#define PCI_DEVICE_ID_ATI_215_LN 0x4c4E
#define PCI_DEVICE_ID_ATI_215_LR 0x4c52
#define PCI_DEVICE_ID_ATI_215_LS 0x4c53
#define PCI_DEVICE_ID_ATI_264_LT 0x4c54
/* Mach64 VT */
#define PCI_DEVICE_ID_ATI_264VT 0x5654
#define PCI_DEVICE_ID_ATI_264VU 0x5655
#define PCI_DEVICE_ID_ATI_264VV 0x5656
/* Rage128 GL */
#define PCI_DEVICE_ID_ATI_RAGE128_RE 0x5245
#define PCI_DEVICE_ID_ATI_RAGE128_RF 0x5246
#define PCI_DEVICE_ID_ATI_RAGE128_RG 0x5247
/* Rage128 VR */
#define PCI_DEVICE_ID_ATI_RAGE128_RK 0x524b
#define PCI_DEVICE_ID_ATI_RAGE128_RL 0x524c
#define PCI_DEVICE_ID_ATI_RAGE128_SE 0x5345
#define PCI_DEVICE_ID_ATI_RAGE128_SF 0x5346
#define PCI_DEVICE_ID_ATI_RAGE128_SG 0x5347
#define PCI_DEVICE_ID_ATI_RAGE128_SH 0x5348
#define PCI_DEVICE_ID_ATI_RAGE128_SK 0x534b
#define PCI_DEVICE_ID_ATI_RAGE128_SL 0x534c
#define PCI_DEVICE_ID_ATI_RAGE128_SM 0x534d
#define PCI_DEVICE_ID_ATI_RAGE128_SN 0x534e
/* Rage128 Ultra */
#define PCI_DEVICE_ID_ATI_RAGE128_TF 0x5446
#define PCI_DEVICE_ID_ATI_RAGE128_TL 0x544c
#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452
#define PCI_DEVICE_ID_ATI_RAGE128_TS 0x5453
#define PCI_DEVICE_ID_ATI_RAGE128_TT 0x5454
#define PCI_DEVICE_ID_ATI_RAGE128_TU 0x5455
/* Rage128 M3 */
#define PCI_DEVICE_ID_ATI_RAGE128_LE 0x4c45
#define PCI_DEVICE_ID_ATI_RAGE128_LF 0x4c46
/* Rage128 M4 */
#define PCI_DEVICE_ID_ATI_RAGE128_MF 0x4d46
#define PCI_DEVICE_ID_ATI_RAGE128_ML 0x4d4c
/* Rage128 Pro GL */
#define PCI_DEVICE_ID_ATI_RAGE128_PA 0x5041
#define PCI_DEVICE_ID_ATI_RAGE128_PB 0x5042
#define PCI_DEVICE_ID_ATI_RAGE128_PC 0x5043
#define PCI_DEVICE_ID_ATI_RAGE128_PD 0x5044
#define PCI_DEVICE_ID_ATI_RAGE128_PE 0x5045
#define PCI_DEVICE_ID_ATI_RAGE128_PF 0x5046
/* Rage128 Pro VR */
#define PCI_DEVICE_ID_ATI_RAGE128_PG 0x5047
#define PCI_DEVICE_ID_ATI_RAGE128_PH 0x5048
#define PCI_DEVICE_ID_ATI_RAGE128_PI 0x5049
#define PCI_DEVICE_ID_ATI_RAGE128_PJ 0x504A
#define PCI_DEVICE_ID_ATI_RAGE128_PK 0x504B
#define PCI_DEVICE_ID_ATI_RAGE128_PL 0x504C
#define PCI_DEVICE_ID_ATI_RAGE128_PM 0x504D
#define PCI_DEVICE_ID_ATI_RAGE128_PN 0x504E
#define PCI_DEVICE_ID_ATI_RAGE128_PO 0x504F
#define PCI_DEVICE_ID_ATI_RAGE128_PP 0x5050
#define PCI_DEVICE_ID_ATI_RAGE128_PQ 0x5051
#define PCI_DEVICE_ID_ATI_RAGE128_PR 0x5052
#define PCI_DEVICE_ID_ATI_RAGE128_PS 0x5053
#define PCI_DEVICE_ID_ATI_RAGE128_PT 0x5054
#define PCI_DEVICE_ID_ATI_RAGE128_PU 0x5055
#define PCI_DEVICE_ID_ATI_RAGE128_PV 0x5056
#define PCI_DEVICE_ID_ATI_RAGE128_PW 0x5057
#define PCI_DEVICE_ID_ATI_RAGE128_PX 0x5058
/* Rage128 M4 */
/* Radeon R100 */
#define PCI_DEVICE_ID_ATI_RADEON_QD 0x5144
#define PCI_DEVICE_ID_ATI_RADEON_QE 0x5145
#define PCI_DEVICE_ID_ATI_RADEON_QF 0x5146
#define PCI_DEVICE_ID_ATI_RADEON_QG 0x5147
/* Radeon RV100 (VE) */
#define PCI_DEVICE_ID_ATI_RADEON_QY 0x5159
#define PCI_DEVICE_ID_ATI_RADEON_QZ 0x515a
/* Radeon R200 (8500) */
#define PCI_DEVICE_ID_ATI_RADEON_QL 0x514c
#define PCI_DEVICE_ID_ATI_RADEON_QN 0x514e
#define PCI_DEVICE_ID_ATI_RADEON_QO 0x514f
#define PCI_DEVICE_ID_ATI_RADEON_Ql 0x516c
#define PCI_DEVICE_ID_ATI_RADEON_BB 0x4242
/* Radeon R200 (9100) */
#define PCI_DEVICE_ID_ATI_RADEON_QM 0x514d
/* Radeon RV200 (7500) */
#define PCI_DEVICE_ID_ATI_RADEON_QW 0x5157
#define PCI_DEVICE_ID_ATI_RADEON_QX 0x5158
/* Radeon NV-100 */
/* Radeon RV250 (9000) */
#define PCI_DEVICE_ID_ATI_RADEON_Id 0x4964
#define PCI_DEVICE_ID_ATI_RADEON_Ie 0x4965
#define PCI_DEVICE_ID_ATI_RADEON_If 0x4966
#define PCI_DEVICE_ID_ATI_RADEON_Ig 0x4967
/* Radeon RV280 (9200) */
#define PCI_DEVICE_ID_ATI_RADEON_Ya 0x5961
#define PCI_DEVICE_ID_ATI_RADEON_Yd 0x5964
/* Radeon R300 (9500) */
/* Radeon R300 (9700) */
#define PCI_DEVICE_ID_ATI_RADEON_ND 0x4e44
#define PCI_DEVICE_ID_ATI_RADEON_NE 0x4e45
#define PCI_DEVICE_ID_ATI_RADEON_NF 0x4e46
#define PCI_DEVICE_ID_ATI_RADEON_NG 0x4e47
/* Radeon R350 (9800) */
/* Radeon RV350 (9600) */
/* Radeon M6 */
#define PCI_DEVICE_ID_ATI_RADEON_LY 0x4c59
#define PCI_DEVICE_ID_ATI_RADEON_LZ 0x4c5a
/* Radeon M7 */
#define PCI_DEVICE_ID_ATI_RADEON_LW 0x4c57
#define PCI_DEVICE_ID_ATI_RADEON_LX 0x4c58
/* Radeon M9 */
#define PCI_DEVICE_ID_ATI_RADEON_Ld 0x4c64
#define PCI_DEVICE_ID_ATI_RADEON_Le 0x4c65
#define PCI_DEVICE_ID_ATI_RADEON_Lf 0x4c66
#define PCI_DEVICE_ID_ATI_RADEON_Lg 0x4c67
/* Radeon */
/* RadeonIGP */
#define PCI_DEVICE_ID_ATI_RS100 0xcab0
#define PCI_DEVICE_ID_ATI_RS200 0xcab2
#define PCI_DEVICE_ID_ATI_RS200_B 0xcbb2
#define PCI_DEVICE_ID_ATI_RS250 0xcab3
#define PCI_DEVICE_ID_ATI_RS300_100 0x5830
#define PCI_DEVICE_ID_ATI_RS300_133 0x5831
#define PCI_DEVICE_ID_ATI_RS300_166 0x5832
#define PCI_DEVICE_ID_ATI_RS300_200 0x5833
#define PCI_DEVICE_ID_ATI_RS350_100 0x7830
#define PCI_DEVICE_ID_ATI_RS350_133 0x7831
#define PCI_DEVICE_ID_ATI_RS350_166 0x7832
#define PCI_DEVICE_ID_ATI_RS350_200 0x7833
#define PCI_DEVICE_ID_ATI_RS400_100 0x5a30
#define PCI_DEVICE_ID_ATI_RS400_133 0x5a31
#define PCI_DEVICE_ID_ATI_RS400_166 0x5a32
#define PCI_DEVICE_ID_ATI_RS400_200 0x5a33
#define PCI_DEVICE_ID_ATI_RS480 0x5950
/* ATI IXP Chipset */
#define PCI_DEVICE_ID_ATI_IXP200_IDE 0x4349
[PATCH] i2c-piix4: Add ATI IXP200/300/400 support This patch adds the ATI IXP southbridges support to i2c-piix4, as it turned out those chips are compatible with it. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 23:48:09 +08:00
#define PCI_DEVICE_ID_ATI_IXP200_SMBUS 0x4353
#define PCI_DEVICE_ID_ATI_IXP300_SMBUS 0x4363
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_ATI_IXP300_IDE 0x4369
#define PCI_DEVICE_ID_ATI_IXP300_SATA 0x436e
[PATCH] i2c-piix4: Add ATI IXP200/300/400 support This patch adds the ATI IXP southbridges support to i2c-piix4, as it turned out those chips are compatible with it. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 23:48:09 +08:00
#define PCI_DEVICE_ID_ATI_IXP400_SMBUS 0x4372
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_ATI_IXP400_IDE 0x4376
#define PCI_DEVICE_ID_ATI_IXP400_SATA 0x4379
[PATCH] ide: ATI SB600 IDE support Add support for the IDE device on ATI SB600 Signed-off-by: Felix Kuehling <fkuehlin@ati.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19 13:22:05 +08:00
#define PCI_DEVICE_ID_ATI_IXP400_SATA2 0x437a
#define PCI_DEVICE_ID_ATI_IXP600_SATA 0x4380
i2c-piix4: Fix SB700 PCI device ID We find that SB700 and SB800 use the same SMBus device ID as SB600, which is 0x4385, instead of the already submitted 0x4395. Besides removing the wrong SB700 device ID, add SB800 support to kernel, by renaming the PCI_DEVICE_ID_ATI_IXP600_SMBUS into PCI_DEVICE_ID_ATI_SBX00_SMBUS. Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 14:56:38 +08:00
#define PCI_DEVICE_ID_ATI_SBX00_SMBUS 0x4385
[PATCH] ide: ATI SB600 IDE support Add support for the IDE device on ATI SB600 Signed-off-by: Felix Kuehling <fkuehlin@ati.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19 13:22:05 +08:00
#define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c
Add the combined mode for ATI SB700 Besides those modes in ATI SB600 SATA controller, ATI SB700 supports one more mode:the combined mode. The combined mode is a Legacy IDE mode used for compatibility with some old OS without AHCI driver, but now it is not necessary for Linux since the kernel has supported AHCI. Signed-off-by: Luugi Marsan <luugi.marsan@amd.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 13:48:50 +08:00
#define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390
add the IDE device ID for ATI SB700 Add the IDE device ID to atiixp_pci_tbl struct in atiixp.c for ATI SB700. From: Henry Su <henry.su@amd.com> Signed-off-by: Luugi Marsan <luugi.marsan@amd.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-24 08:42:37 +08:00
#define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_VLSI 0x1004
#define PCI_DEVICE_ID_VLSI_82C592 0x0005
#define PCI_DEVICE_ID_VLSI_82C593 0x0006
#define PCI_DEVICE_ID_VLSI_82C594 0x0007
#define PCI_DEVICE_ID_VLSI_82C597 0x0009
#define PCI_DEVICE_ID_VLSI_82C541 0x000c
#define PCI_DEVICE_ID_VLSI_82C543 0x000d
#define PCI_DEVICE_ID_VLSI_82C532 0x0101
#define PCI_DEVICE_ID_VLSI_82C534 0x0102
#define PCI_DEVICE_ID_VLSI_82C535 0x0104
#define PCI_DEVICE_ID_VLSI_82C147 0x0105
#define PCI_DEVICE_ID_VLSI_VAS96011 0x0702
x86/amd-iommu: Work around S3 BIOS bug This patch adds a workaround for an IOMMU BIOS problem to the AMD IOMMU driver. The result of the bug is that the IOMMU does not execute commands anymore when the system comes out of the S3 state resulting in system failure. The bug in the BIOS is that is does not restore certain hardware specific registers correctly. This workaround reads out the contents of these registers at boot time and restores them on resume from S3. The workaround is limited to the specific IOMMU chipset where this problem occurs. Cc: stable@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-09-23 21:15:19 +08:00
/* AMD RD890 Chipset */
#define PCI_DEVICE_ID_RD890_IOMMU 0x5a23
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_ADL 0x1005
#define PCI_DEVICE_ID_ADL_2301 0x2301
#define PCI_VENDOR_ID_NS 0x100b
#define PCI_DEVICE_ID_NS_87415 0x0002
#define PCI_DEVICE_ID_NS_87560_LIO 0x000e
#define PCI_DEVICE_ID_NS_87560_USB 0x0012
#define PCI_DEVICE_ID_NS_83815 0x0020
#define PCI_DEVICE_ID_NS_83820 0x0022
[PATCH] i386: GPIO driver for AMD CS5535/CS5536 A simple driver for the CS5535 and CS5536 that allows a user-space program to manipulate GPIO pins. The CS5535/CS5536 chips are Geode processor companion devices. Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 12:51:29 +08:00
#define PCI_DEVICE_ID_NS_CS5535_ISA 0x002b
[ALSA] Add support for the CS5535 Audio device Add support for the CS5535 Audio device. I've fixed up some errors as per Takashi's advice from the thread: http://lkml.org/lkml/2005/9/15/119 From: Alan Cox <alan@lxorguk.ukuu.org.uk> cs5535 is a 32bit x86 only device using weird CPU features Signed-off-by: Jaya Kumar <jayakumar.alsa@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-17 17:12:23 +08:00
#define PCI_DEVICE_ID_NS_CS5535_IDE 0x002d
#define PCI_DEVICE_ID_NS_CS5535_AUDIO 0x002e
#define PCI_DEVICE_ID_NS_CS5535_USB 0x002f
[PATCH] Trivial cleanup in the PCI IDs for the CS5535 Rename a poorly worded PCI ID for the Geode GX and CS5535 companion chips. The graphics processor and host bridge actually live in the northbridge on the integrated processor, not in the companion chip. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 12:40:07 +08:00
#define PCI_DEVICE_ID_NS_GX_VIDEO 0x0030
[NET]: Add Sun Cassini driver. Written by Adrian Sun (asun@darksunrising.com). Ported to 2.6.x by Tom 'spot' Callaway <tcallawa@redhat.com>. Further cleaned up and integrated by David S. Miller Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-28 06:24:13 +08:00
#define PCI_DEVICE_ID_NS_SATURN 0x0035
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NS_SCx200_BRIDGE 0x0500
#define PCI_DEVICE_ID_NS_SCx200_SMI 0x0501
#define PCI_DEVICE_ID_NS_SCx200_IDE 0x0502
#define PCI_DEVICE_ID_NS_SCx200_AUDIO 0x0503
#define PCI_DEVICE_ID_NS_SCx200_VIDEO 0x0504
#define PCI_DEVICE_ID_NS_SCx200_XBUS 0x0505
#define PCI_DEVICE_ID_NS_SC1100_BRIDGE 0x0510
#define PCI_DEVICE_ID_NS_SC1100_SMI 0x0511
#define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515
#define PCI_DEVICE_ID_NS_87410 0xd001
[PATCH] Trivial cleanup in the PCI IDs for the CS5535 Rename a poorly worded PCI ID for the Geode GX and CS5535 companion chips. The graphics processor and host bridge actually live in the northbridge on the integrated processor, not in the companion chip. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 12:40:07 +08:00
#define PCI_DEVICE_ID_NS_GX_HOST_BRIDGE 0x0028
[PATCH] Base support for AMD Geode GX/LX processors Provide basic support for the AMD Geode GX and LX processors. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:12:14 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_TSENG 0x100c
#define PCI_DEVICE_ID_TSENG_W32P_2 0x3202
#define PCI_DEVICE_ID_TSENG_W32P_b 0x3205
#define PCI_DEVICE_ID_TSENG_W32P_c 0x3206
#define PCI_DEVICE_ID_TSENG_W32P_d 0x3207
#define PCI_DEVICE_ID_TSENG_ET6000 0x3208
#define PCI_VENDOR_ID_WEITEK 0x100e
#define PCI_DEVICE_ID_WEITEK_P9000 0x9001
#define PCI_DEVICE_ID_WEITEK_P9100 0x9100
#define PCI_VENDOR_ID_DEC 0x1011
#define PCI_DEVICE_ID_DEC_BRD 0x0001
#define PCI_DEVICE_ID_DEC_TULIP 0x0002
#define PCI_DEVICE_ID_DEC_TGA 0x0004
#define PCI_DEVICE_ID_DEC_TULIP_FAST 0x0009
#define PCI_DEVICE_ID_DEC_TGA2 0x000D
#define PCI_DEVICE_ID_DEC_FDDI 0x000F
#define PCI_DEVICE_ID_DEC_TULIP_PLUS 0x0014
#define PCI_DEVICE_ID_DEC_21142 0x0019
#define PCI_DEVICE_ID_DEC_21052 0x0021
#define PCI_DEVICE_ID_DEC_21150 0x0022
#define PCI_DEVICE_ID_DEC_21152 0x0024
#define PCI_DEVICE_ID_DEC_21153 0x0025
#define PCI_DEVICE_ID_DEC_21154 0x0026
#define PCI_DEVICE_ID_DEC_21285 0x1065
#define PCI_DEVICE_ID_COMPAQ_42XX 0x0046
#define PCI_VENDOR_ID_CIRRUS 0x1013
#define PCI_DEVICE_ID_CIRRUS_7548 0x0038
#define PCI_DEVICE_ID_CIRRUS_5430 0x00a0
#define PCI_DEVICE_ID_CIRRUS_5434_4 0x00a4
#define PCI_DEVICE_ID_CIRRUS_5434_8 0x00a8
#define PCI_DEVICE_ID_CIRRUS_5436 0x00ac
#define PCI_DEVICE_ID_CIRRUS_5446 0x00b8
#define PCI_DEVICE_ID_CIRRUS_5480 0x00bc
#define PCI_DEVICE_ID_CIRRUS_5462 0x00d0
#define PCI_DEVICE_ID_CIRRUS_5464 0x00d4
#define PCI_DEVICE_ID_CIRRUS_5465 0x00d6
#define PCI_DEVICE_ID_CIRRUS_6729 0x1100
#define PCI_DEVICE_ID_CIRRUS_6832 0x1110
#define PCI_DEVICE_ID_CIRRUS_7543 0x1202
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_CIRRUS_4610 0x6001
#define PCI_DEVICE_ID_CIRRUS_4612 0x6003
#define PCI_DEVICE_ID_CIRRUS_4615 0x6004
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_IBM 0x1014
#define PCI_DEVICE_ID_IBM_TR 0x0018
#define PCI_DEVICE_ID_IBM_TR_WAKE 0x003e
#define PCI_DEVICE_ID_IBM_CPC710_PCI64 0x00fc
#define PCI_DEVICE_ID_IBM_SNIPE 0x0180
#define PCI_DEVICE_ID_IBM_CITRINE 0x028C
#define PCI_DEVICE_ID_IBM_GEMSTONE 0xB166
[SCSI] pci: PCI ids for new ipr adapters Adds some new PCI IDs for new IPR adapters. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-02 07:02:36 +08:00
#define PCI_DEVICE_ID_IBM_OBSIDIAN 0x02BD
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1 0x0031
#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2 0x0219
#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX 0x021A
#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM 0x0251
icom: add new sub-device-id to support new adapter This patch add new sub-device-id to support new adapter and changed the interrupt irq number for unsigned char to unsigned int. [akpm@osdl.org: fix whitespace in device table] Signed-off by: Wendy Xiong <wendyx@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17 13:11:16 +08:00
#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252
8250_pci: add IBM Saturn serial card The IBM Saturn serial card has only one port. Without that fixup, the kernel thinks it has two, which confuses userland setup and admin tools as well. [akpm@linux-foundation.org: fix pci-ids.h layout] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Cox <alan@linux.intel.com> Cc: Michael Reed <mreed10@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-27 07:50:05 +08:00
#define PCI_SUBVENDOR_ID_IBM 0x1014
#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT 0x03d4
ioatdma: add the unisys "i/oat" pci vendor/device id Cc: John Magolan <john.magolan@unisys.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-07-13 23:06:19 +08:00
#define PCI_VENDOR_ID_UNISYS 0x1018
#define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C
[PATCH] pci_ids: cleanup comments pci_ids.h cleanup: convert // comment to /* comment */ Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-20 07:55:32 +08:00
#define PCI_VENDOR_ID_COMPEX2 0x101a /* pci.ids says "AT&T GIS (NCR)" */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_COMPEX2_100VG 0x0005
#define PCI_VENDOR_ID_WD 0x101c
#define PCI_DEVICE_ID_WD_90C 0xc24a
#define PCI_VENDOR_ID_AMI 0x101e
#define PCI_DEVICE_ID_AMI_MEGARAID3 0x1960
#define PCI_DEVICE_ID_AMI_MEGARAID 0x9010
#define PCI_DEVICE_ID_AMI_MEGARAID2 0x9060
#define PCI_VENDOR_ID_AMD 0x1022
[TG3]: Add AMD K8 to list of write-reorder chipsets. Thanks to Andy Stewart for the report and testing debug patches from Michael Chan. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-17 07:59:20 +08:00
#define PCI_DEVICE_ID_AMD_K8_NB 0x1100
include/linux/pci_id.h: add amd northbridge defines pci_ids.h needs two of the AMD NB device-ids namely, Addressmap and the Memory Controller devices This patch adds those to the pci_id.h include file Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:50:17 +08:00
#define PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP 0x1101
#define PCI_DEVICE_ID_AMD_K8_NB_MEMCTL 0x1102
hwmon: New driver k8temp Add support for the temperature sensor(s) found in AMD K8 CPUs. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-28 20:40:17 +08:00
#define PCI_DEVICE_ID_AMD_K8_NB_MISC 0x1103
x86: add PCI IDs for AMD Barcelona PCI devices Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Cc: Barry Kasindorf <barry.kasindorf@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 14:59:40 +08:00
#define PCI_DEVICE_ID_AMD_10H_NB_HT 0x1200
#define PCI_DEVICE_ID_AMD_10H_NB_MAP 0x1201
#define PCI_DEVICE_ID_AMD_10H_NB_DRAM 0x1202
#define PCI_DEVICE_ID_AMD_10H_NB_MISC 0x1203
#define PCI_DEVICE_ID_AMD_10H_NB_LINK 0x1204
x86, pci: add northbridge pci ids for fam 0x11 processors The PCI device ids for AMD family 0x11 processors are missing in pci_ids.h. This patch adds them. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-02 19:13:39 +08:00
#define PCI_DEVICE_ID_AMD_11H_NB_HT 0x1300
#define PCI_DEVICE_ID_AMD_11H_NB_MAP 0x1301
#define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302
#define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303
#define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304
x86, amd_nb: Export model 0x10 and later PCI id Add the F3 PCI id of F15h, model 0x10 to pci_ids.h and to the amd_nb code which generates the list of northbridges on an AMD box. Shorten define name while at it so that it fits into pci_ids.h. Acked-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-05-05 00:28:21 +08:00
#define PCI_DEVICE_ID_AMD_15H_M10H_F3 0x1403
pci_ids: Add PCI device ID functions 3 and 4 for newer F15h models. Add PCI device IDs for AMD F15h, model 30h. They will be used in amd_nb.c and amd64_edac.c Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-03 06:43:02 +08:00
#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F3 0x141d
#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F4 0x141e
pci_ids: Add PCI device IDs for F15h M60h Add F3, F4 device IDs to be used in amd_nb.c and amd64_edac.c Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1411070195-10177-1-git-send-email-Aravind.Gopalakrishnan@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-09-19 03:56:35 +08:00
#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F3 0x1573
#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F4 0x1574
x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions I've received complaints that the numa_node attribute for family 15h model 00-0fh (e.g. Interlagos) northbridge functions shows -1 instead of the proper node ID. Correct this with attached quirks (similar to quirks for other AMD CPU families used in multi-socket systems). Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Frank Arnold <frank.arnold@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/20111202072143.GA31916@alberich.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-02 15:21:43 +08:00
#define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600
#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
PCI: Rename CPU PCI id define With increasing number of PCI function ids, add the PCI function id in the define name instead of its symbolic name in the BKDG for more clarity. Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-20 01:22:11 +08:00
#define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603
x86, amd-nb: Rename CPU PCI id define for F4 With increasing number of PCI function ids, add the PCI function id in the define name instead of its symbolic name in the BKDG for more clarity. This renames function 4 define. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <20110330183447.GA3668@aftab> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-31 02:34:47 +08:00
#define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604
x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions I've received complaints that the numa_node attribute for family 15h model 00-0fh (e.g. Interlagos) northbridge functions shows -1 instead of the proper node ID. Correct this with attached quirks (similar to quirks for other AMD CPU families used in multi-socket systems). Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Frank Arnold <frank.arnold@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/20111202072143.GA31916@alberich.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-02 15:21:43 +08:00
#define PCI_DEVICE_ID_AMD_15H_NB_F5 0x1605
amd64_edac: Add Family 16h support Add code to handle DRAM ECC errors decoding for Fam16h. Tested on Fam16h with ECC turned on using the mce_amd_inj facility and works fine. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> [ Boris: cleanups and clarifications ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-04-18 03:57:13 +08:00
#define PCI_DEVICE_ID_AMD_16H_NB_F3 0x1533
#define PCI_DEVICE_ID_AMD_16H_NB_F4 0x1534
amd64_edac: Add support for newer F16h models Extend ECC decoding support for F16h M30h. Tested on F16h M30h with ECC turned on using mce_amd_inj module and the patch works fine. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/1392913726-16961-1-git-send-email-Aravind.Gopalakrishnan@amd.com Tested-by: Arindam Nath <Arindam.Nath@amd.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2014-02-21 00:28:46 +08:00
#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F3 0x1583
#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F4 0x1584
hwmon/k10temp, x86/amd_nb: Consolidate shared device IDs Consolidate shared PCI_DEVICE_IDs that were scattered through k10temp and amd_nb, and move them into pci_ids. Signed-off-by: Brian Woods <brian.woods@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Clemens Ladisch <clemens@ladisch.de> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@redhat.com> CC: Jean Delvare <jdelvare@suse.com> CC: Jia Zhang <qianyue.zj@alibaba-inc.com> CC: <linux-hwmon@vger.kernel.org> CC: <linux-pci@vger.kernel.org> CC: Pu Wen <puwen@hygon.cn> CC: Thomas Gleixner <tglx@linutronix.de> CC: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20181106200754.60722-2-brian.woods@amd.com
2018-11-07 04:08:14 +08:00
#define PCI_DEVICE_ID_AMD_17H_DF_F3 0x1463
#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F3 0x15eb
x86/amd_nb: Add PCI device IDs for family 17h, model 30h Add the PCI device IDs for family 17h model 30h, since they are needed for accessing various registers via the data fabric/SMN interface. Signed-off-by: Brian Woods <brian.woods@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Clemens Ladisch <clemens@ladisch.de> CC: Guenter Roeck <linux@roeck-us.net> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@redhat.com> CC: Jean Delvare <jdelvare@suse.com> CC: Jia Zhang <qianyue.zj@alibaba-inc.com> CC: <linux-hwmon@vger.kernel.org> CC: <linux-pci@vger.kernel.org> CC: Pu Wen <puwen@hygon.cn> CC: Thomas Gleixner <tglx@linutronix.de> CC: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20181106200754.60722-4-brian.woods@amd.com
2018-11-07 04:08:18 +08:00
#define PCI_DEVICE_ID_AMD_17H_M30H_DF_F3 0x1493
x86/amd_nb: Add AMD family 17h model 60h PCI IDs Add PCI IDs for AMD Renoir (4000-series Ryzen CPUs). This is necessary to enable support for temperature sensors via the k10temp module. Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Yazen Ghannam <yazen.ghannam@amd.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20200510204842.2603-2-amonakov@ispras.ru
2020-05-11 04:48:40 +08:00
#define PCI_DEVICE_ID_AMD_17H_M60H_DF_F3 0x144b
x86/amd_nb: Add PCI device IDs for family 17h, model 70h The AMD Ryzen gen 3 processors came with a different PCI IDs for the function 3 & 4 which are used to access the SMN interface. The root PCI address however remained at the same address as the model 30h. Adding the F3/F4 PCI IDs respectively to the misc and link ids appear to be sufficient for k10temp, so let's add them and follow up on the patch if other functions need more tweaking. Vicki Pfau sent an identical patch after I checked that no-one had written this patch. I would have been happy about dropping my patch but unlike for his patch series, I had already Cc:ed the x86 people and they already reviewed the changes. Since Vicki has not answered to any email after his initial series, let's assume she is on vacation and let's avoid duplication of reviews from the maintainers and merge my series. To acknowledge Vicki's anteriority, I added her S-o-b to the patch. v2, suggested by Guenter Roeck and Brian Woods: - rename from 71h to 70h Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Marcel Bocu <marcel.p.bocu@gmail.com> Tested-by: Marcel Bocu <marcel.p.bocu@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Brian Woods <brian.woods@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: "Woods, Brian" <Brian.Woods@amd.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20190722174510.2179-1-marcel.p.bocu@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-07-23 01:45:10 +08:00
#define PCI_DEVICE_ID_AMD_17H_M70H_DF_F3 0x1443
x86/amd_nb: Add Family 19h PCI IDs Add the new PCI Device 18h IDs for AMD Family 19h systems. Note that Family 19h systems will not have a new PCI root device ID. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200110015651.14887-4-Yazen.Ghannam@amd.com
2020-01-10 09:56:49 +08:00
#define PCI_DEVICE_ID_AMD_19H_DF_F3 0x1653
x86/amd_nb: Add AMD family 19h model 50h PCI ids This is required to support Zen3 APUs in k10temp. Signed-off-by: David Bartley <andareed@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Wei Huang <wei.huang2@amd.com> Link: https://lkml.kernel.org/r/20210520174130.94954-1-andareed@gmail.com
2021-05-21 01:41:30 +08:00
#define PCI_DEVICE_ID_AMD_19H_M50H_DF_F3 0x166d
x86, AMD, PCI: Add AMD northbridge PCI device id for CPU families 12h and 14h This patch adds the PCI northbridge device id for AMD CPU families 12h and 14h. Both families have implemented the same PCI northbridge device. There are some future use cases that use this PCI device and we would like to clarify its naming. Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: xen-devel@lists.xensource.com <xen-devel@lists.xensource.com> Cc: Keir Fraser <keir@xen.org> Cc: Jan Beulich <JBeulich@novell.com> LKML-Reference: <20110106165107.GL4739@erda.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 00:51:07 +08:00
#define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_AMD_LANCE 0x2000
#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001
#define PCI_DEVICE_ID_AMD_SCSI 0x2020
#define PCI_DEVICE_ID_AMD_SERENADE 0x36c0
#define PCI_DEVICE_ID_AMD_FE_GATE_7006 0x7006
#define PCI_DEVICE_ID_AMD_FE_GATE_7007 0x7007
#define PCI_DEVICE_ID_AMD_FE_GATE_700C 0x700C
#define PCI_DEVICE_ID_AMD_FE_GATE_700E 0x700E
#define PCI_DEVICE_ID_AMD_COBRA_7401 0x7401
#define PCI_DEVICE_ID_AMD_VIPER_7409 0x7409
#define PCI_DEVICE_ID_AMD_VIPER_740B 0x740B
#define PCI_DEVICE_ID_AMD_VIPER_7410 0x7410
#define PCI_DEVICE_ID_AMD_VIPER_7411 0x7411
#define PCI_DEVICE_ID_AMD_VIPER_7413 0x7413
[PATCH] pci_ids: remove duplicates from pci_ids.h pci_ids.h cleanup: remove duplicated entries and change some defines to explicit value rather than in terms of another constant, preparation for removing unused symbols Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> include/linux/pci_ids.h | 28 +++++++++------------------- 1 file changed, 9 insertions(+), 19 deletions(-)
2005-09-29 08:39:46 +08:00
#define PCI_DEVICE_ID_AMD_VIPER_7440 0x7440
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_AMD_OPUS_7441 0x7441
#define PCI_DEVICE_ID_AMD_OPUS_7443 0x7443
[PATCH] pci_ids: remove duplicates from pci_ids.h pci_ids.h cleanup: remove duplicated entries and change some defines to explicit value rather than in terms of another constant, preparation for removing unused symbols Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> include/linux/pci_ids.h | 28 +++++++++------------------- 1 file changed, 9 insertions(+), 19 deletions(-)
2005-09-29 08:39:46 +08:00
#define PCI_DEVICE_ID_AMD_VIPER_7443 0x7443
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_AMD_OPUS_7445 0x7445
PCI: shpchp: Add shpchp_is_native() In the same way we do for pciehp, add shpchp_is_native(), which returns true if the bridge should be handled by the native SHPC driver. Then convert the driver to use this function. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-01 00:42:11 +08:00
#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
pci: Add AMD8111 PCI Bridge PCI Device ID Add the PCI Device ID of the PCI Bridge Controller on AMD8111 chip. Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 07:58:48 +08:00
#define PCI_DEVICE_ID_AMD_8111_PCI 0x7460
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_AMD_8111_LPC 0x7468
#define PCI_DEVICE_ID_AMD_8111_IDE 0x7469
#define PCI_DEVICE_ID_AMD_8111_SMBUS2 0x746a
#define PCI_DEVICE_ID_AMD_8111_SMBUS 0x746b
#define PCI_DEVICE_ID_AMD_8111_AUDIO 0x746d
#define PCI_DEVICE_ID_AMD_8151_0 0x7454
[PATCH] pci_ids.h: correct naming of 1022:7450 (AMD 8131 Bridge) The naming of the constant defined for PCI ID 1022:7450 does not seem to match the information at http://pciids.sourceforge.net/: http://pci-ids.ucw.cz/iii/?i=1022 There 1022:7450 is listed as "AMD-8131 PCI-X Bridge" while 1022:7451 is listed as "AMD-8131 PCI-X IOAPIC". Yet, the current definition for 0x7450 is PCI_DEVICE_ID_AMD_8131_APIC. It seems to me like that name should map to 0x7451, while a name like PCI_DEVICE_ID_AMD_8131_BRIDGE should map to 0x7450. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-21 03:33:56 +08:00
#define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450
#define PCI_DEVICE_ID_AMD_8131_APIC 0x7451
[BNX2]: Disable MSI on 5706 if AMD 8132 bridge is present. MSI is defined to be 32-bit write. The 5706 does 64-bit MSI writes with byte enables disabled on the unused 32-bit word. This is legal but causes problems on the AMD 8132 which will eventually stop responding after a while. Without this patch, the MSI test done by the driver during open will pass, but MSI will eventually stop working after a few MSIs are written by the device. AMD believes this incompatibility is unique to the 5706, and prefers to locally disable MSI rather than globally disabling it using pci_msi_quirk. Update version to 1.4.45. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-30 08:06:23 +08:00
#define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458
PCI: Add support for AMD Nolan USB3 DRD This patch adds PCI id for USB3 Dual-Role Device of AMD Nolan (NL) SoC. It will be used for PCI quirks and DWC3 device driver. Signed-off-by: Jason Chang <jason.chang@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-31 11:11:15 +08:00
#define PCI_DEVICE_ID_AMD_NL_USB 0x7912
pata_cs5535: add pci id for AMD based CS5535 controllers Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-03 22:22:42 +08:00
#define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F
[PATCH] i386: GPIO driver for AMD CS5535/CS5536 A simple driver for the CS5535 and CS5536 that allows a user-space program to manipulate GPIO pins. The CS5535/CS5536 chips are Geode processor companion devices. Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 12:51:29 +08:00
#define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090
#define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091
#define PCI_DEVICE_ID_AMD_CS5536_AUDIO 0x2093
#define PCI_DEVICE_ID_AMD_CS5536_OHC 0x2094
#define PCI_DEVICE_ID_AMD_CS5536_EHC 0x2095
#define PCI_DEVICE_ID_AMD_CS5536_UDC 0x2096
#define PCI_DEVICE_ID_AMD_CS5536_UOC 0x2097
cs5536: add support for IDE controller variant Several legacy devices such as Geode-based Cisco ASA appliances and DB800 development board do possess CS5536 IDE controller with different PCI id than existing one. Using pata_generic is not always feasible as at least DB800 requires MSR quirk from pata_cs5536 to be used with vendor firmware. Signed-off-by: Andrey Korolyov <andrey@xdel.ru> CC: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2017-08-10 18:21:14 +08:00
#define PCI_DEVICE_ID_AMD_CS5536_DEV_IDE 0x2092
[PATCH] i386: GPIO driver for AMD CS5535/CS5536 A simple driver for the CS5535 and CS5536 that allows a user-space program to manipulate GPIO pins. The CS5535/CS5536 chips are Geode processor companion devices. Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 12:51:29 +08:00
#define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A
[PATCH] Base support for AMD Geode GX/LX processors Provide basic support for the AMD Geode GX and LX processors. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:12:14 +08:00
#define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081
#define PCI_DEVICE_ID_AMD_LX_AES 0x2082
ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2 This patch renames the code name SB900 into Hudson-2 Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-13 11:14:00 +08:00
#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800
PCI: Put Hudson-2 device IDs together To put all AMD Hudson-2 device IDs together for better maintenance. [bhelgaas: also sort Hudson-2 devices by ID] Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Jean Delvare <khali@linux-fr.org>
2013-06-03 18:22:28 +08:00
#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b
#define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c
pci_ids: Add AMD KERNCZ device ID support The KERNCZ is new AMD SB/FCH generation name, like HUDSON2. 0x790b is the device ID for this generation. Signed-off-by: Wan ZongShun <Vincent.Wan@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-11 20:11:45 +08:00
#define PCI_DEVICE_ID_AMD_KERNCZ_SMBUS 0x790b
[PATCH] Base support for AMD Geode GX/LX processors Provide basic support for the AMD Geode GX and LX processors. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:12:14 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_TRIDENT 0x1023
#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000
#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001
#define PCI_DEVICE_ID_TRIDENT_9320 0x9320
#define PCI_DEVICE_ID_TRIDENT_9388 0x9388
#define PCI_DEVICE_ID_TRIDENT_9397 0x9397
#define PCI_DEVICE_ID_TRIDENT_939A 0x939A
#define PCI_DEVICE_ID_TRIDENT_9520 0x9520
#define PCI_DEVICE_ID_TRIDENT_9525 0x9525
#define PCI_DEVICE_ID_TRIDENT_9420 0x9420
#define PCI_DEVICE_ID_TRIDENT_9440 0x9440
#define PCI_DEVICE_ID_TRIDENT_9660 0x9660
#define PCI_DEVICE_ID_TRIDENT_9750 0x9750
#define PCI_DEVICE_ID_TRIDENT_9850 0x9850
#define PCI_DEVICE_ID_TRIDENT_9880 0x9880
#define PCI_DEVICE_ID_TRIDENT_8400 0x8400
#define PCI_DEVICE_ID_TRIDENT_8420 0x8420
#define PCI_DEVICE_ID_TRIDENT_8500 0x8500
#define PCI_VENDOR_ID_AI 0x1025
#define PCI_DEVICE_ID_AI_M1435 0x1435
#define PCI_VENDOR_ID_DELL 0x1028
#define PCI_DEVICE_ID_DELL_RACIII 0x0008
#define PCI_DEVICE_ID_DELL_RAC4 0x0012
[SCSI] MegaRAID SAS RAID: new driver Signed-off-by: Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-21 05:46:58 +08:00
#define PCI_DEVICE_ID_DELL_PERC5 0x0015
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ahci: Add support for Dell S140 and later controllers This patch enables support for Dell S140 and later controllers that use Intel's PCHs configured as PCI_CLASS_STORAGE_RAID. Reviewed-by: Mika Westerberg <mika.westerberg@intel.com> Signed-off-by: Charles Rose <charles.rose@dell.com> Link: https://lore.kernel.org/r/20210615190801.1744466-1-charles.rose@dell.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-16 03:08:01 +08:00
#define PCI_SUBVENDOR_ID_DELL 0x1028
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_MATROX 0x102B
#define PCI_DEVICE_ID_MATROX_MGA_2 0x0518
#define PCI_DEVICE_ID_MATROX_MIL 0x0519
#define PCI_DEVICE_ID_MATROX_MYS 0x051A
#define PCI_DEVICE_ID_MATROX_MIL_2 0x051b
[PATCH] matroxfb: Add support for Mystique AGP Add new entries for Mystique AGP with the PCI ID 0x051e. I don't actually have such boards but according to google they do exist. Curiosly X.Org doesn't recognize that PCI ID. And what's even more interesting is that Matrox's own Windows drivers don't recognize it either. After going through about a dozen different versions I did find one older driver that does list this particular ID. It is also listed in the pci.ids file. I'm not sure if non-220 AGP chips exist. I left the chip revision check intact for AGP chips nonetheless. Signed-off-by: Ville Syrjl <syrjala@sci.fi> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 17:00:57 +08:00
#define PCI_DEVICE_ID_MATROX_MYS_AGP 0x051e
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_MATROX_MIL_2_AGP 0x051f
#define PCI_DEVICE_ID_MATROX_MGA_IMP 0x0d10
#define PCI_DEVICE_ID_MATROX_G100_MM 0x1000
#define PCI_DEVICE_ID_MATROX_G100_AGP 0x1001
#define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520
#define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521
#define PCI_DEVICE_ID_MATROX_G400 0x0525
matroxfb: support G200eV chip Support the Matrox G200eV chip, based on timings that I found in the X.org matrox driver. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 13:03:52 +08:00
#define PCI_DEVICE_ID_MATROX_G200EV_PCI 0x0530
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_MATROX_G550 0x2527
#define PCI_DEVICE_ID_MATROX_VIA 0x4536
pata_cm64x: fix boot crash on parisc The old IDE cmd64x checks the status of the CNTRL register to see if the ports are enabled before probing them. pata_cmd64x doesn't do this, which causes a HPMC on parisc when it tries to poke at the secondary port because apparently the BAR isn't wired up (and a non-responding piece of memory causes a HPMC). Fix this by porting the CNTRL register port detection logic from IDE cmd64x. In addition, following converns from Alan Cox, add a check to see if a mobility electronics bridge is the immediate parent and forgo the check if it is (prevents problems on hotplug controllers). Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-25 03:30:14 +08:00
#define PCI_VENDOR_ID_MOBILITY_ELECTRONICS 0x14f2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_CT 0x102c
#define PCI_DEVICE_ID_CT_69000 0x00c0
#define PCI_DEVICE_ID_CT_65545 0x00d8
#define PCI_DEVICE_ID_CT_65548 0x00dc
#define PCI_DEVICE_ID_CT_65550 0x00e0
#define PCI_DEVICE_ID_CT_65554 0x00e4
#define PCI_DEVICE_ID_CT_65555 0x00e5
#define PCI_VENDOR_ID_MIRO 0x1031
#define PCI_DEVICE_ID_MIRO_36050 0x5601
#define PCI_DEVICE_ID_MIRO_DC10PLUS 0x7efe
#define PCI_DEVICE_ID_MIRO_DC30PLUS 0xd801
#define PCI_VENDOR_ID_NEC 0x1033
#define PCI_DEVICE_ID_NEC_CBUS_1 0x0001 /* PCI-Cbus Bridge */
#define PCI_DEVICE_ID_NEC_LOCAL 0x0002 /* Local Bridge */
#define PCI_DEVICE_ID_NEC_ATM 0x0003 /* ATM LAN Controller */
#define PCI_DEVICE_ID_NEC_R4000 0x0004 /* R4000 Bridge */
#define PCI_DEVICE_ID_NEC_486 0x0005 /* 486 Like Peripheral Bus Bridge */
#define PCI_DEVICE_ID_NEC_ACCEL_1 0x0006 /* Graphic Accelerator */
#define PCI_DEVICE_ID_NEC_UXBUS 0x0007 /* UX-Bus Bridge */
#define PCI_DEVICE_ID_NEC_ACCEL_2 0x0008 /* Graphic Accelerator */
#define PCI_DEVICE_ID_NEC_GRAPH 0x0009 /* PCI-CoreGraph Bridge */
#define PCI_DEVICE_ID_NEC_VL 0x0016 /* PCI-VL Bridge */
#define PCI_DEVICE_ID_NEC_STARALPHA2 0x002c /* STAR ALPHA2 */
#define PCI_DEVICE_ID_NEC_CBUS_2 0x002d /* PCI-Cbus Bridge */
#define PCI_DEVICE_ID_NEC_USB 0x0035 /* PCI-USB Host */
#define PCI_DEVICE_ID_NEC_CBUS_3 0x003b
#define PCI_DEVICE_ID_NEC_NAPCCARD 0x003e
#define PCI_DEVICE_ID_NEC_PCX2 0x0046 /* PowerVR */
#define PCI_DEVICE_ID_NEC_VRC5476 0x009b
#define PCI_DEVICE_ID_NEC_VRC4173 0x00a5
#define PCI_DEVICE_ID_NEC_VRC5477_AC97 0x00a6
#define PCI_DEVICE_ID_NEC_PC9821CS01 0x800c /* PC-9821-CS01 */
#define PCI_DEVICE_ID_NEC_PC9821NRB06 0x800d /* PC-9821NR-B06 */
#define PCI_VENDOR_ID_FD 0x1036
#define PCI_DEVICE_ID_FD_36C70 0x0000
#define PCI_VENDOR_ID_SI 0x1039
#define PCI_DEVICE_ID_SI_5591_AGP 0x0001
#define PCI_DEVICE_ID_SI_6202 0x0002
#define PCI_DEVICE_ID_SI_503 0x0008
#define PCI_DEVICE_ID_SI_ACPI 0x0009
#define PCI_DEVICE_ID_SI_SMBUS 0x0016
#define PCI_DEVICE_ID_SI_LPC 0x0018
#define PCI_DEVICE_ID_SI_5597_VGA 0x0200
#define PCI_DEVICE_ID_SI_6205 0x0205
#define PCI_DEVICE_ID_SI_501 0x0406
#define PCI_DEVICE_ID_SI_496 0x0496
#define PCI_DEVICE_ID_SI_300 0x0300
#define PCI_DEVICE_ID_SI_315H 0x0310
#define PCI_DEVICE_ID_SI_315 0x0315
#define PCI_DEVICE_ID_SI_315PRO 0x0325
#define PCI_DEVICE_ID_SI_530 0x0530
#define PCI_DEVICE_ID_SI_540 0x0540
#define PCI_DEVICE_ID_SI_550 0x0550
#define PCI_DEVICE_ID_SI_540_VGA 0x5300
#define PCI_DEVICE_ID_SI_550_VGA 0x5315
#define PCI_DEVICE_ID_SI_620 0x0620
#define PCI_DEVICE_ID_SI_630 0x0630
#define PCI_DEVICE_ID_SI_633 0x0633
#define PCI_DEVICE_ID_SI_635 0x0635
#define PCI_DEVICE_ID_SI_640 0x0640
#define PCI_DEVICE_ID_SI_645 0x0645
#define PCI_DEVICE_ID_SI_646 0x0646
#define PCI_DEVICE_ID_SI_648 0x0648
#define PCI_DEVICE_ID_SI_650 0x0650
#define PCI_DEVICE_ID_SI_651 0x0651
#define PCI_DEVICE_ID_SI_655 0x0655
#define PCI_DEVICE_ID_SI_661 0x0661
#define PCI_DEVICE_ID_SI_730 0x0730
#define PCI_DEVICE_ID_SI_733 0x0733
#define PCI_DEVICE_ID_SI_630_VGA 0x6300
#define PCI_DEVICE_ID_SI_735 0x0735
#define PCI_DEVICE_ID_SI_740 0x0740
#define PCI_DEVICE_ID_SI_741 0x0741
#define PCI_DEVICE_ID_SI_745 0x0745
#define PCI_DEVICE_ID_SI_746 0x0746
#define PCI_DEVICE_ID_SI_755 0x0755
#define PCI_DEVICE_ID_SI_760 0x0760
#define PCI_DEVICE_ID_SI_900 0x0900
#define PCI_DEVICE_ID_SI_961 0x0961
#define PCI_DEVICE_ID_SI_962 0x0962
#define PCI_DEVICE_ID_SI_963 0x0963
[PATCH] sis5513: enable ATA133 for the SiS965 southbridge Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-20 04:43:45 +08:00
#define PCI_DEVICE_ID_SI_965 0x0965
[PATCH] sis5513: add SiS south bridge ID 0x966 and 0x968 New SiS south bridge device ID is 0x966. Next coming product will be 0x968. (Will be released in Q4, this year) We don't make any updates to the IDE controller. Signed-off-by: David Wang <touch@sis.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-09 00:47:51 +08:00
#define PCI_DEVICE_ID_SI_966 0x0966
#define PCI_DEVICE_ID_SI_968 0x0968
sis5513: adding PCI-ID The SiS966 has one additional PCI-ID 1180. If the chipset is using this PCI-ID, the primary channel is connected to the first PATA-port. The secondary channel is connected to SATA-ports in IDE emulation mode. The legacy IO-ports are used. The including of the PCI-ID into pata_sis is not sufficient, because the legacy driver in drivers/ide is initialized before pata_sis. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-08 21:21:58 +08:00
#define PCI_DEVICE_ID_SI_1180 0x1180
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_SI_5511 0x5511
#define PCI_DEVICE_ID_SI_5513 0x5513
[PATCH] Small fixes backported to old IDE SiS driver Some quick backport bits from the libata PATA work to fix things found in the sis driver. The piix driver needs some fixes too but those are way to large and need someone working on old IDE with time to do them. This patch fixes the case where random bits get loaded into SIS timing registers according to the description of the correct behaviour from Vojtech Pavlik. It also adds the SiS5517 ATA16 chipset which is not currently supported by the driver. Thanks to Conrad Harriss for loaning me the machine with the 5517 chipset. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 17:56:31 +08:00
#define PCI_DEVICE_ID_SI_5517 0x5517
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_SI_5518 0x5518
#define PCI_DEVICE_ID_SI_5571 0x5571
#define PCI_DEVICE_ID_SI_5581 0x5581
#define PCI_DEVICE_ID_SI_5582 0x5582
#define PCI_DEVICE_ID_SI_5591 0x5591
#define PCI_DEVICE_ID_SI_5596 0x5596
#define PCI_DEVICE_ID_SI_5597 0x5597
#define PCI_DEVICE_ID_SI_5598 0x5598
#define PCI_DEVICE_ID_SI_5600 0x5600
#define PCI_DEVICE_ID_SI_7012 0x7012
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_SI_7013 0x7013
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_SI_7016 0x7016
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_SI_7018 0x7018
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_HP 0x103c
[SCSI] hpsa: add HP/3PAR vendor id to pci_ids.h Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-19 03:57:57 +08:00
#define PCI_VENDOR_ID_HP_3PAR 0x1590
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_HP_VISUALIZE_EG 0x1005
#define PCI_DEVICE_ID_HP_VISUALIZE_FX6 0x1006
#define PCI_DEVICE_ID_HP_VISUALIZE_FX4 0x1008
#define PCI_DEVICE_ID_HP_VISUALIZE_FX2 0x100a
#define PCI_DEVICE_ID_HP_TACHYON 0x1028
#define PCI_DEVICE_ID_HP_TACHLITE 0x1029
#define PCI_DEVICE_ID_HP_J2585A 0x1030
#define PCI_DEVICE_ID_HP_J2585B 0x1031
#define PCI_DEVICE_ID_HP_J2973A 0x1040
#define PCI_DEVICE_ID_HP_J2970A 0x1042
#define PCI_DEVICE_ID_HP_DIVA 0x1048
#define PCI_DEVICE_ID_HP_DIVA_TOSCA1 0x1049
#define PCI_DEVICE_ID_HP_DIVA_TOSCA2 0x104A
#define PCI_DEVICE_ID_HP_DIVA_MAESTRO 0x104B
#define PCI_DEVICE_ID_HP_REO_IOC 0x10f1
#define PCI_DEVICE_ID_HP_VISUALIZE_FXE 0x108b
#define PCI_DEVICE_ID_HP_DIVA_HALFDOME 0x1223
#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE 0x1226
#define PCI_DEVICE_ID_HP_DIVA_POWERBAR 0x1227
#define PCI_DEVICE_ID_HP_ZX1_IOC 0x122a
#define PCI_DEVICE_ID_HP_PCIX_LBA 0x122e
#define PCI_DEVICE_ID_HP_SX1000_IOC 0x127c
#define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282
#define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290
#define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301
[SERIAL] new hp diva console port Add the new ID 0x132a and configure the new PCI Diva console port. This device supports only 1 single console UART. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-25 05:16:38 +08:00
#define PCI_DEVICE_ID_HP_DIVA_HURRICANE 0x132a
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_HP_CISSA 0x3220
[PATCH] cciss: pci id fix This patch fixes a PCI ID I got wrong before. It also adds support for another new SAS controller due out this summer. I didn't have a marketing name prior to my last submission. Also modifies the copyright date range. Signed-off-by: Mike Miller <mike.miller@hp.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 05:36:48 +08:00
#define PCI_DEVICE_ID_HP_CISSC 0x3230
[PATCH] cciss: new controller pci/subsystem ids This patch adds new PCI and subsystem ID's that finally made the spec. It also include a name change for one controller. I know there's a lot of duplicat names but the fw folks wanted this for the different implementations. Even though the same ASIC is used it may be embedded on some platforms, standup card in others, and a mezzanine in other servers. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 16:25:19 +08:00
#define PCI_DEVICE_ID_HP_CISSD 0x3238
cciss: add new hardware support Add support for the next generation of HP Smart Array SAS/SATA controllers. Shipping date is late Fall 2008. Bump the driver version to 3.6.20 to reflect the new hardware support from patch 1 of this set. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-13 06:21:34 +08:00
#define PCI_DEVICE_ID_HP_CISSE 0x323a
cciss: fix PCI IDs for new Smart Array controllers cciss: fix PCI IDs for new controllers This patch fixes the botched up PCI IDs of new controllers. Please consider this patch for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-19 15:40:34 +08:00
#define PCI_DEVICE_ID_HP_CISSF 0x323b
[SCSI] hpsa: gen8plus Smart Array IDs Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-21 05:05:18 +08:00
#define PCI_DEVICE_ID_HP_CISSH 0x323c
[SCSI] hpsa: add HP Smart Array Gen9 PCI ID's This patch adds the PCI ID's for HP Smart Array Gen9 controllers. Please consider this patch for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-05 04:05:55 +08:00
#define PCI_DEVICE_ID_HP_CISSI 0x3239
[PATCH] cciss: new controller pci/subsystem ids This patch adds new PCI and subsystem ID's that finally made the spec. It also include a name change for one controller. I know there's a lot of duplicat names but the fw folks wanted this for the different implementations. Even though the same ASIC is used it may be embedded on some platforms, standup card in others, and a mezzanine in other servers. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 16:25:19 +08:00
#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_PCTECH 0x1042
#define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000
#define PCI_DEVICE_ID_PCTECH_RZ1001 0x1001
#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
#define PCI_VENDOR_ID_ASUSTEK 0x1043
#define PCI_DEVICE_ID_ASUSTEK_0675 0x0675
#define PCI_VENDOR_ID_DPT 0x1044
#define PCI_DEVICE_ID_DPT 0xa400
#define PCI_VENDOR_ID_OPTI 0x1045
#define PCI_DEVICE_ID_OPTI_82C558 0xc558
#define PCI_DEVICE_ID_OPTI_82C621 0xc621
#define PCI_DEVICE_ID_OPTI_82C700 0xc700
#define PCI_DEVICE_ID_OPTI_82C825 0xd568
#define PCI_VENDOR_ID_ELSA 0x1048
#define PCI_DEVICE_ID_ELSA_MICROLINK 0x1000
#define PCI_DEVICE_ID_ELSA_QS3000 0x3000
PCI: add PCI vendor id for STmicroelectronics Signed-off-by: Anders Wallin <anders.wallin@windriver.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-24 01:39:04 +08:00
#define PCI_VENDOR_ID_STMICRO 0x104A
PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT) The chip is an I/O hub used by some Atom boards. Most of those symbols are used in arch/x86/platform/sta2x11/sta2x11.c (to be introduced) and in the specific drivers as well. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06 20:32:41 +08:00
#define PCI_DEVICE_ID_STMICRO_USB_HOST 0xCC00
#define PCI_DEVICE_ID_STMICRO_USB_OHCI 0xCC01
#define PCI_DEVICE_ID_STMICRO_USB_OTG 0xCC02
#define PCI_DEVICE_ID_STMICRO_UART_HWFC 0xCC03
#define PCI_DEVICE_ID_STMICRO_UART_NO_HWFC 0xCC04
#define PCI_DEVICE_ID_STMICRO_SOC_DMA 0xCC05
#define PCI_DEVICE_ID_STMICRO_SATA 0xCC06
#define PCI_DEVICE_ID_STMICRO_I2C 0xCC07
#define PCI_DEVICE_ID_STMICRO_SPI_HS 0xCC08
#define PCI_DEVICE_ID_STMICRO_MAC 0xCC09
#define PCI_DEVICE_ID_STMICRO_SDIO_EMMC 0xCC0A
#define PCI_DEVICE_ID_STMICRO_SDIO 0xCC0B
#define PCI_DEVICE_ID_STMICRO_GPIO 0xCC0C
#define PCI_DEVICE_ID_STMICRO_VIP 0xCC0D
#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_DMA 0xCC0E
#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_SRCS 0xCC0F
#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_MSPS 0xCC10
#define PCI_DEVICE_ID_STMICRO_CAN 0xCC11
#define PCI_DEVICE_ID_STMICRO_MLB 0xCC12
#define PCI_DEVICE_ID_STMICRO_DBP 0xCC13
#define PCI_DEVICE_ID_STMICRO_SATA_PHY 0xCC14
#define PCI_DEVICE_ID_STMICRO_ESRAM 0xCC15
#define PCI_DEVICE_ID_STMICRO_VIC 0xCC16
PCI: add PCI vendor id for STmicroelectronics Signed-off-by: Anders Wallin <anders.wallin@windriver.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-24 01:39:04 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_BUSLOGIC 0x104B
#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER 0x1040
#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT 0x8130
#define PCI_VENDOR_ID_TI 0x104c
#define PCI_DEVICE_ID_TI_TVP4020 0x3d07
#define PCI_DEVICE_ID_TI_4450 0x8011
[PATCH] yenta: add support for more TI bridges Support some more TI cardbus bridges. most of them are multifunction devices which adds 1394 controllers, smartcard readers etc. this could also help with the various problems with the XX21 controllers seen on the linux-pcmcia list. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-21 05:12:17 +08:00
#define PCI_DEVICE_ID_TI_XX21_XX11 0x8031
tifm_7xx1: recognize device 0xac8f as supported This patch also adds symbolic defines for supported pci ids. Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-10 22:55:35 +08:00
#define PCI_DEVICE_ID_TI_XX21_XX11_FM 0x8033
[MMC] sdhci: Add SDHCI controller ids Add ids for SDHCI controllers so that they can be identified for quirks. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-30 17:22:32 +08:00
#define PCI_DEVICE_ID_TI_XX21_XX11_SD 0x8034
[PATCH] yenta: add support for more TI bridges Support some more TI cardbus bridges. most of them are multifunction devices which adds 1394 controllers, smartcard readers etc. this could also help with the various problems with the XX21 controllers seen on the linux-pcmcia list. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-21 05:12:17 +08:00
#define PCI_DEVICE_ID_TI_X515 0x8036
[PATCH] pcmcia: TI PCIxx12 CardBus controller support The patch below adds support for the TI PCIxx12 CardBus controllers. This seems to be sufficient to detect the cardbus bridge on an HP nc6320 and works with an orinoco wifi card. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-05-09 13:22:07 +08:00
#define PCI_DEVICE_ID_TI_XX12 0x8039
tifm_7xx1: recognize device 0xac8f as supported This patch also adds symbolic defines for supported pci ids. Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-10 22:55:35 +08:00
#define PCI_DEVICE_ID_TI_XX12_FM 0x803b
PCI quirk: TI XIO200a erroneously reports support for fast b2b transfers This quirk will disable fast back to back transfer on the secondary bus segment of the TI Bridge. Signed-off-by: Gabe Black <gabe.black@ni.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-06 22:19:45 +08:00
#define PCI_DEVICE_ID_TI_XIO2000A 0x8231
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TI_1130 0xac12
#define PCI_DEVICE_ID_TI_1031 0xac13
#define PCI_DEVICE_ID_TI_1131 0xac15
#define PCI_DEVICE_ID_TI_1250 0xac16
#define PCI_DEVICE_ID_TI_1220 0xac17
#define PCI_DEVICE_ID_TI_1221 0xac19
#define PCI_DEVICE_ID_TI_1210 0xac1a
#define PCI_DEVICE_ID_TI_1450 0xac1b
#define PCI_DEVICE_ID_TI_1225 0xac1c
#define PCI_DEVICE_ID_TI_1251A 0xac1d
#define PCI_DEVICE_ID_TI_1211 0xac1e
#define PCI_DEVICE_ID_TI_1251B 0xac1f
#define PCI_DEVICE_ID_TI_4410 0xac41
#define PCI_DEVICE_ID_TI_4451 0xac42
#define PCI_DEVICE_ID_TI_4510 0xac44
#define PCI_DEVICE_ID_TI_4520 0xac46
[PATCH] yenta: add support for more TI bridges Support some more TI cardbus bridges. most of them are multifunction devices which adds 1394 controllers, smartcard readers etc. this could also help with the various problems with the XX21 controllers seen on the linux-pcmcia list. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-21 05:12:17 +08:00
#define PCI_DEVICE_ID_TI_7510 0xac47
#define PCI_DEVICE_ID_TI_7610 0xac48
#define PCI_DEVICE_ID_TI_7410 0xac49
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TI_1410 0xac50
#define PCI_DEVICE_ID_TI_1420 0xac51
#define PCI_DEVICE_ID_TI_1451A 0xac52
#define PCI_DEVICE_ID_TI_1620 0xac54
#define PCI_DEVICE_ID_TI_1520 0xac55
#define PCI_DEVICE_ID_TI_1510 0xac56
[PATCH] yenta: add support for more TI bridges Support some more TI cardbus bridges. most of them are multifunction devices which adds 1394 controllers, smartcard readers etc. this could also help with the various problems with the XX21 controllers seen on the linux-pcmcia list. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-21 05:12:17 +08:00
#define PCI_DEVICE_ID_TI_X620 0xac8d
#define PCI_DEVICE_ID_TI_X420 0xac8e
tifm_7xx1: recognize device 0xac8f as supported This patch also adds symbolic defines for supported pci ids. Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-10 22:55:35 +08:00
#define PCI_DEVICE_ID_TI_XX20_FM 0xac8f
PCI: Add TI J721E device to PCI IDs Add TI J721E device to the PCI ID database. Since this device has a configurable PCIe endpoint, it could be used with different drivers. Link: https://lore.kernel.org/r/20210201195809.7342-15-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-02-02 03:58:06 +08:00
#define PCI_DEVICE_ID_TI_J721E 0xb00d
PCI: Add device IDs for DRA74x and DRA72x Add device IDs for DRA74x and DRA72x devices. These devices have configurable PCI endpoint. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-27 17:45:13 +08:00
#define PCI_DEVICE_ID_TI_DRA74x 0xb500
#define PCI_DEVICE_ID_TI_DRA72x 0xb501
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_SONY 0x104d
/* Winbond have two vendor IDs! See 0x10ad as well */
#define PCI_VENDOR_ID_WINBOND2 0x1050
#define PCI_DEVICE_ID_WINBOND2_89C940F 0x5a5a
#define PCI_DEVICE_ID_WINBOND2_6692 0x6692
#define PCI_VENDOR_ID_ANIGMA 0x1051
#define PCI_DEVICE_ID_ANIGMA_MC145575 0x0100
i7300_edac: start a driver for i7300 chipset (Clarksboro) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-25 10:22:57 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_EFAR 0x1055
#define PCI_DEVICE_ID_EFAR_SLC90E66_1 0x9130
#define PCI_DEVICE_ID_EFAR_SLC90E66_3 0x9463
#define PCI_VENDOR_ID_MOTOROLA 0x1057
#define PCI_DEVICE_ID_MOTOROLA_MPC105 0x0001
#define PCI_DEVICE_ID_MOTOROLA_MPC106 0x0002
#define PCI_DEVICE_ID_MOTOROLA_MPC107 0x0004
#define PCI_DEVICE_ID_MOTOROLA_RAVEN 0x4801
#define PCI_DEVICE_ID_MOTOROLA_FALCON 0x4802
#define PCI_DEVICE_ID_MOTOROLA_HAWK 0x4803
#define PCI_DEVICE_ID_MOTOROLA_HARRIER 0x480b
#define PCI_DEVICE_ID_MOTOROLA_MPC5200 0x5803
[PATCH] ppc32: Adds support for the PCI hostbridge in MPC5200B ppc32: Adds support for the PCI hostbridge in MPC5200B Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-26 19:37:07 +08:00
#define PCI_DEVICE_ID_MOTOROLA_MPC5200B 0x5809
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_PROMISE 0x105a
#define PCI_DEVICE_ID_PROMISE_20265 0x0d30
#define PCI_DEVICE_ID_PROMISE_20267 0x4d30
#define PCI_DEVICE_ID_PROMISE_20246 0x4d33
#define PCI_DEVICE_ID_PROMISE_20262 0x4d38
#define PCI_DEVICE_ID_PROMISE_20263 0x0D38
#define PCI_DEVICE_ID_PROMISE_20268 0x4d68
#define PCI_DEVICE_ID_PROMISE_20269 0x4d69
#define PCI_DEVICE_ID_PROMISE_20270 0x6268
#define PCI_DEVICE_ID_PROMISE_20271 0x6269
#define PCI_DEVICE_ID_PROMISE_20275 0x1275
#define PCI_DEVICE_ID_PROMISE_20276 0x5275
#define PCI_DEVICE_ID_PROMISE_20277 0x7275
ath5k: support LEDs on Acer Aspire One netbook Add vendor ID for Foxconn and use it to set the ath5k LED gpio and polarity for Acer branded laptops. base.c: Changes-licensed-under: 3-Clause-BSD Reported-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-02 04:01:44 +08:00
#define PCI_VENDOR_ID_FOXCONN 0x105b
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_UMC 0x1060
#define PCI_DEVICE_ID_UMC_UM8673F 0x0101
#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a
#define PCI_DEVICE_ID_UMC_UM8886A 0x886a
i386: add support for picopower irq router Add support for PicoPower PT86C523 IRQ router to be used with the in-kernel yenta driver for CardBus. With this patch cardbus works on e.g. Dell Latitude XPi P150CD. Initial patch for kernel 2.4 series by Sune Mølgaard http://molgaard.org/code/linux-2.4.31-picopower.patch Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com) Testing and confirmation that it works by Austin Acton Cleaned up a little for inclusion in a 2.6.21-rc7 based kernel. Added some more cleanups according to CodingStyle, as noted by Randy Dunlap on LKML. [akpm@linux-foundation.org: build fixes] Signed-off-by: Thomas Backlund <tmb@mandriva.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-11 05:42:15 +08:00
#define PCI_VENDOR_ID_PICOPOWER 0x1066
#define PCI_DEVICE_ID_PICOPOWER_PT86C523 0x0002
#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP 0x8002
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_MYLEX 0x1069
#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001
#define PCI_DEVICE_ID_MYLEX_DAC960_PD 0x0002
#define PCI_DEVICE_ID_MYLEX_DAC960_PG 0x0010
#define PCI_DEVICE_ID_MYLEX_DAC960_LA 0x0020
#define PCI_DEVICE_ID_MYLEX_DAC960_LP 0x0050
#define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56
[PATCH] DAC960: add support for Mylex AcceleRAID 4/5/600 This patch adds support for a new class of DAC960 controllers. It's based on the GPLed idac320 driver from IBM for Linux 2.4.18. That driver is a fork of the 2.4.18 version of DAC960 that adds support for this new type of controllers (internally called "GEM Series"), that differ from other DAC960 V2 firmware controllers only in the register offsets and removes support for all others. This patch instead integrates support for these controllers into the DAC960 driver. Thanks to Anders Norrbring for pointing me to the idac320 driver and testing this patch. No Signed-Off: line because all code is either copy & pasted from IBM's idac320 driver or support for other controllers in the 2.6 DAC960 driver. Note: the really odd formating matches the rest of the DAC960 driver. Cc: Dave Olien <dmo@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-06 07:15:58 +08:00
#define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_APPLE 0x106b
#define PCI_DEVICE_ID_APPLE_BANDIT 0x0001
#define PCI_DEVICE_ID_APPLE_HYDRA 0x000e
#define PCI_DEVICE_ID_APPLE_UNI_N_FW 0x0018
#define PCI_DEVICE_ID_APPLE_UNI_N_AGP 0x0020
#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC 0x0021
#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP 0x0024
#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027
#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d
[TG3]: Fix 5700/5701 DMA corruption on Apple G4. Fix 5700/5701 DMA write corruption on Apple G4 by detecting the Apple UniNorth PCI 1.5 chipset and adjusting the DMA write boundary to 16. DMA test fails to detect the problem with this chipset. Thanks to Manuel Perez Ayala for reporting the problem and helping to debug it. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-09 05:13:14 +08:00
#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032
[PATCH] ide: fix PCI_DEVIEC_ID_APPLE_UNI_N_ATA spelling Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-08-19 04:19:55 +08:00
#define PCI_DEVICE_ID_APPLE_UNI_N_ATA 0x0033
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2 0x0034
#define PCI_DEVICE_ID_APPLE_IPID_ATA100 0x003b
#define PCI_DEVICE_ID_APPLE_K2_ATA100 0x0043
#define PCI_DEVICE_ID_APPLE_U3_AGP 0x004b
#define PCI_DEVICE_ID_APPLE_K2_GMAC 0x004c
#define PCI_DEVICE_ID_APPLE_SH_ATA 0x0050
#define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051
#define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058
#define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059
powerpc: Fix some late PowerMac G5 with PCIe ATI graphics A misconfiguration by the firmware of the U4 PCIe bridge on PowerMac G5 with the U4 bridge (latest generations, may also affect the iMac G5 "iSight") is causing us to re-assign the PCI BARs of the video card, which can get it out of sync with the firmware, thus breaking offb. This works around it by fixing up the bridge configuration properly at boot time. It also fixes a bug where the firmware provides us with an incorrect set of accessible regions in the device-tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-01 05:34:36 +08:00
#define PCI_DEVICE_ID_APPLE_U4_PCIE 0x005b
[PATCH] ppc: add support for new powerbooks Enablement patch for the new PowerBooks (late 2005 edition). This enables the ATA controller, Gigabit ethernet and basic AGP setup. Bluetooth works out-of-the box after running hid2hci. Still remaining is to get the touchpad to work, the simple change of just adding the new USB ids isn't enough. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14 08:06:48 +08:00
#define PCI_DEVICE_ID_APPLE_IPID2_AGP 0x0066
#define PCI_DEVICE_ID_APPLE_IPID2_ATA 0x0069
#define PCI_DEVICE_ID_APPLE_IPID2_FW 0x006a
#define PCI_DEVICE_ID_APPLE_IPID2_GMAC 0x006b
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_APPLE_TIGON3 0x1645
#define PCI_VENDOR_ID_YAMAHA 0x1073
#define PCI_DEVICE_ID_YAMAHA_724 0x0004
#define PCI_DEVICE_ID_YAMAHA_724F 0x000d
#define PCI_DEVICE_ID_YAMAHA_740 0x000a
#define PCI_DEVICE_ID_YAMAHA_740C 0x000c
#define PCI_DEVICE_ID_YAMAHA_744 0x0010
#define PCI_DEVICE_ID_YAMAHA_754 0x0012
#define PCI_VENDOR_ID_QLOGIC 0x1077
[PATCH] PCI: Move various PCI IDs to header file Move various QLogic, Vitesse, and Intel storage controller PCI IDs to the main header file. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-10 16:49:14 +08:00
#define PCI_DEVICE_ID_QLOGIC_ISP10160 0x1016
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_QLOGIC_ISP1020 0x1020
[PATCH] PCI: Move various PCI IDs to header file Move various QLogic, Vitesse, and Intel storage controller PCI IDs to the main header file. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-10 16:49:14 +08:00
#define PCI_DEVICE_ID_QLOGIC_ISP1080 0x1080
#define PCI_DEVICE_ID_QLOGIC_ISP12160 0x1216
#define PCI_DEVICE_ID_QLOGIC_ISP1240 0x1240
#define PCI_DEVICE_ID_QLOGIC_ISP1280 0x1280
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_QLOGIC_ISP2100 0x2100
#define PCI_DEVICE_ID_QLOGIC_ISP2200 0x2200
[SCSI] qla2xxx: Add pci ids for new ISP types. Add pci ids for new ISP types. Move old definitions in local qla_def.h file to pci_ids.h as well. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-07 01:30:16 +08:00
#define PCI_DEVICE_ID_QLOGIC_ISP2300 0x2300
#define PCI_DEVICE_ID_QLOGIC_ISP2312 0x2312
#define PCI_DEVICE_ID_QLOGIC_ISP2322 0x2322
#define PCI_DEVICE_ID_QLOGIC_ISP6312 0x6312
#define PCI_DEVICE_ID_QLOGIC_ISP6322 0x6322
#define PCI_DEVICE_ID_QLOGIC_ISP2422 0x2422
#define PCI_DEVICE_ID_QLOGIC_ISP2432 0x2432
#define PCI_DEVICE_ID_QLOGIC_ISP2512 0x2512
#define PCI_DEVICE_ID_QLOGIC_ISP2522 0x2522
[SCSI] qla2xxx: Add ISP54xx support. Chip is similar in form to our ISP24xx offering. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-10 06:27:13 +08:00
#define PCI_DEVICE_ID_QLOGIC_ISP5422 0x5422
#define PCI_DEVICE_ID_QLOGIC_ISP5432 0x5432
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_CYRIX 0x1078
#define PCI_DEVICE_ID_CYRIX_5510 0x0000
#define PCI_DEVICE_ID_CYRIX_PCI_MASTER 0x0001
#define PCI_DEVICE_ID_CYRIX_5520 0x0002
#define PCI_DEVICE_ID_CYRIX_5530_LEGACY 0x0100
#define PCI_DEVICE_ID_CYRIX_5530_IDE 0x0102
#define PCI_DEVICE_ID_CYRIX_5530_AUDIO 0x0103
#define PCI_DEVICE_ID_CYRIX_5530_VIDEO 0x0104
#define PCI_VENDOR_ID_CONTAQ 0x1080
#define PCI_DEVICE_ID_CONTAQ_82C693 0xc693
#define PCI_VENDOR_ID_OLICOM 0x108d
#define PCI_DEVICE_ID_OLICOM_OC2325 0x0012
#define PCI_DEVICE_ID_OLICOM_OC2183 0x0013
#define PCI_DEVICE_ID_OLICOM_OC2326 0x0014
#define PCI_VENDOR_ID_SUN 0x108e
#define PCI_DEVICE_ID_SUN_EBUS 0x1000
#define PCI_DEVICE_ID_SUN_HAPPYMEAL 0x1001
#define PCI_DEVICE_ID_SUN_RIO_EBUS 0x1100
#define PCI_DEVICE_ID_SUN_RIO_GEM 0x1101
#define PCI_DEVICE_ID_SUN_RIO_1394 0x1102
#define PCI_DEVICE_ID_SUN_RIO_USB 0x1103
#define PCI_DEVICE_ID_SUN_GEM 0x2bad
#define PCI_DEVICE_ID_SUN_SIMBA 0x5000
#define PCI_DEVICE_ID_SUN_PBM 0x8000
#define PCI_DEVICE_ID_SUN_SCHIZO 0x8001
#define PCI_DEVICE_ID_SUN_SABRE 0xa000
#define PCI_DEVICE_ID_SUN_HUMMINGBIRD 0xa001
#define PCI_DEVICE_ID_SUN_TOMATILLO 0xa801
[NET]: Add Sun Cassini driver. Written by Adrian Sun (asun@darksunrising.com). Ported to 2.6.x by Tom 'spot' Callaway <tcallawa@redhat.com>. Further cleaned up and integrated by David S. Miller Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-28 06:24:13 +08:00
#define PCI_DEVICE_ID_SUN_CASSINI 0xabba
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
8250_pci: add support for National Instruments 843x RS232 devices This implements basic support for all 843x RS232 devices, but does not add DMA support. This means that sustained data transfers at high baud rates may not be possible on multiple ports simultaneously. Signed-off-by: Shawn Bohrer <shawn.bohrer@ni.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 00:32:07 +08:00
#define PCI_VENDOR_ID_NI 0x1093
8250_pci: add support for National Instruments legacy 8420 RS232 boards Signed-off-by: Will Page <will.page@ni.com> Signed-off-by: Shawn Bohrer <shawn.bohrer@ni.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 00:32:15 +08:00
#define PCI_DEVICE_ID_NI_PCI2322 0xd130
#define PCI_DEVICE_ID_NI_PCI2324 0xd140
#define PCI_DEVICE_ID_NI_PCI2328 0xd150
#define PCI_DEVICE_ID_NI_PXI8422_2322 0xd190
#define PCI_DEVICE_ID_NI_PXI8422_2324 0xd1a0
#define PCI_DEVICE_ID_NI_PXI8420_2322 0xd1d0
#define PCI_DEVICE_ID_NI_PXI8420_2324 0xd1e0
#define PCI_DEVICE_ID_NI_PXI8420_2328 0xd1f0
#define PCI_DEVICE_ID_NI_PXI8420_23216 0xd1f1
#define PCI_DEVICE_ID_NI_PCI2322I 0xd250
#define PCI_DEVICE_ID_NI_PCI2324I 0xd270
#define PCI_DEVICE_ID_NI_PCI23216 0xd2b0
8250_pci: add support for National Instruments 843x RS232 devices This implements basic support for all 843x RS232 devices, but does not add DMA support. This means that sustained data transfers at high baud rates may not be possible on multiple ports simultaneously. Signed-off-by: Shawn Bohrer <shawn.bohrer@ni.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 00:32:07 +08:00
#define PCI_DEVICE_ID_NI_PXI8430_2322 0x7080
#define PCI_DEVICE_ID_NI_PCI8430_2322 0x70db
#define PCI_DEVICE_ID_NI_PXI8430_2324 0x70dd
#define PCI_DEVICE_ID_NI_PCI8430_2324 0x70df
#define PCI_DEVICE_ID_NI_PXI8430_2328 0x70e2
#define PCI_DEVICE_ID_NI_PCI8430_2328 0x70e4
#define PCI_DEVICE_ID_NI_PXI8430_23216 0x70e6
#define PCI_DEVICE_ID_NI_PCI8430_23216 0x70e7
#define PCI_DEVICE_ID_NI_PXI8432_2322 0x70e8
#define PCI_DEVICE_ID_NI_PCI8432_2322 0x70ea
#define PCI_DEVICE_ID_NI_PXI8432_2324 0x70ec
#define PCI_DEVICE_ID_NI_PCI8432_2324 0x70ee
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_CMD 0x1095
#define PCI_DEVICE_ID_CMD_643 0x0643
#define PCI_DEVICE_ID_CMD_646 0x0646
#define PCI_DEVICE_ID_CMD_648 0x0648
#define PCI_DEVICE_ID_CMD_649 0x0649
#define PCI_DEVICE_ID_SII_680 0x0680
#define PCI_DEVICE_ID_SII_3112 0x3112
#define PCI_DEVICE_ID_SII_1210SA 0x0240
#define PCI_VENDOR_ID_BROOKTREE 0x109e
#define PCI_DEVICE_ID_BROOKTREE_878 0x0878
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_BROOKTREE_879 0x0879
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_SGI 0x10a9
#define PCI_DEVICE_ID_SGI_IOC3 0x0003
PCI: i386: traps, change VENDOR to DEVICE traps, change VENDOR to DEVICE Change macro for SGI lithium (arch/i386/mach-visws/traps.c) device from VENDOR to DEVICE, because it's a device id. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-18 16:58:14 +08:00
#define PCI_DEVICE_ID_SGI_LITHIUM 0x1002
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_WINBOND 0x10ad
#define PCI_DEVICE_ID_WINBOND_82C105 0x0105
#define PCI_DEVICE_ID_WINBOND_83C553 0x0565
#define PCI_VENDOR_ID_PLX 0x10b5
#define PCI_DEVICE_ID_PLX_R685 0x1030
#define PCI_DEVICE_ID_PLX_ROMULUS 0x106a
#define PCI_DEVICE_ID_PLX_SPCOM800 0x1076
#define PCI_DEVICE_ID_PLX_1077 0x1077
#define PCI_DEVICE_ID_PLX_SPCOM200 0x1103
#define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151
#define PCI_DEVICE_ID_PLX_R753 0x1152
[PATCH] i4l: add Olitec ISDN PCI card in hisax gazel driver This patch adds support for the Olitec ISDN PCI card in the hisax gazel driver. The gazel driver supports this card, but wasn't aware of its PCI ids. Users used to modify the PCI ids of a supported card in include/linux/pci_ids.h and recompile their kernel to get this card running, as said in most Howtos. This patch makes the hisax gazel driver recognize the PCI ids of the Olitec ISDN PCI card. Signed-off-by: Olivier Blin <oblin@mandriva.com> Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:43:47 +08:00
#define PCI_DEVICE_ID_PLX_OLITEC 0x1187
[PATCH] Goramo PCI200SYN WAN driver subsystem ID patch Goramo finally got PCI subsystem ID for their PCI200SYN card. The attached patch adds support for it - cards with old EEPROM data will emit a warning with URL for update tool. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-30 23:01:53 +08:00
#define PCI_DEVICE_ID_PLX_PCI200SYN 0x3196
[PATCH] Perle multimodem card (PCI-RAS) detection Get the Perle quad-modem PCI card (PCI-RAS4) detected by serial driver. It may also get the PCI-RAS8 running, but can't guarantee as I didn't had one for testing. Signed-off-by: Thomas Hoehn <thomas.hoehn@avocent.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 17:46:05 +08:00
#define PCI_DEVICE_ID_PLX_9030 0x9030
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_PLX_9050 0x9050
ALSA: lx6464es - driver for the digigram lx6464es interface prototype of a driver for the digigram lx6464es 64 channel ethersound interface. Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-24 19:24:35 +08:00
#define PCI_DEVICE_ID_PLX_9056 0x9056
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_PLX_9080 0x9080
#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001
#define PCI_VENDOR_ID_MADGE 0x10b6
#define PCI_DEVICE_ID_MADGE_MK2 0x0002
#define PCI_VENDOR_ID_3COM 0x10b7
#define PCI_DEVICE_ID_3COM_3C985 0x0001
#define PCI_DEVICE_ID_3COM_3C940 0x1700
#define PCI_DEVICE_ID_3COM_3C339 0x3390
#define PCI_DEVICE_ID_3COM_3C359 0x3590
#define PCI_DEVICE_ID_3COM_3C940B 0x80eb
#define PCI_DEVICE_ID_3COM_3CR990 0x9900
#define PCI_DEVICE_ID_3COM_3CR990_TX_95 0x9902
#define PCI_DEVICE_ID_3COM_3CR990_TX_97 0x9903
#define PCI_DEVICE_ID_3COM_3CR990B 0x9904
#define PCI_DEVICE_ID_3COM_3CR990_FX 0x9905
#define PCI_DEVICE_ID_3COM_3CR990SVR95 0x9908
#define PCI_DEVICE_ID_3COM_3CR990SVR97 0x9909
#define PCI_DEVICE_ID_3COM_3CR990SVR 0x990a
#define PCI_VENDOR_ID_AL 0x10b9
#define PCI_DEVICE_ID_AL_M1533 0x1533
PCI: Fix typos and whitespace errors Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2019-05-30 21:05:58 +08:00
#define PCI_DEVICE_ID_AL_M1535 0x1535
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_AL_M1541 0x1541
#define PCI_DEVICE_ID_AL_M1563 0x1563
#define PCI_DEVICE_ID_AL_M1621 0x1621
#define PCI_DEVICE_ID_AL_M1631 0x1631
#define PCI_DEVICE_ID_AL_M1632 0x1632
#define PCI_DEVICE_ID_AL_M1641 0x1641
#define PCI_DEVICE_ID_AL_M1644 0x1644
#define PCI_DEVICE_ID_AL_M1647 0x1647
#define PCI_DEVICE_ID_AL_M1651 0x1651
#define PCI_DEVICE_ID_AL_M1671 0x1671
#define PCI_DEVICE_ID_AL_M1681 0x1681
#define PCI_DEVICE_ID_AL_M1683 0x1683
#define PCI_DEVICE_ID_AL_M1689 0x1689
#define PCI_DEVICE_ID_AL_M5219 0x5219
#define PCI_DEVICE_ID_AL_M5228 0x5228
#define PCI_DEVICE_ID_AL_M5229 0x5229
#define PCI_DEVICE_ID_AL_M5451 0x5451
#define PCI_DEVICE_ID_AL_M7101 0x7101
#define PCI_VENDOR_ID_NEOMAGIC 0x10c8
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005
#define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006
#define PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO 0x8016
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_TCONRAD 0x10da
#define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508
PCI: Move Rohm Vendor ID to generic list Move the Rohm Vendor ID to pci_ids.h instead of defining it in several drivers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-02 07:24:52 +08:00
#define PCI_VENDOR_ID_ROHM 0x10db
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_NVIDIA 0x10de
#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020
#define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028
#define PCI_DEVICE_ID_NVIDIA_UTNT2 0x0029
#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN 0x002a
#define PCI_DEVICE_ID_NVIDIA_VTNT2 0x002C
#define PCI_DEVICE_ID_NVIDIA_UVTNT2 0x002D
[PATCH] i2c: i2c-nforce2 add nforce4 MCP-04 device ID One more supported PCI ID for the i2c-nforce2 driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-12-19 00:25:18 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS 0x0034
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE 0x0035
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA 0x0036
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2 0x003e
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800 0x0041
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE 0x0042
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT 0x0045
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000 0x004E
#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS 0x0052
#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE 0x0053
#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA 0x0054
#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2 0x0055
#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO 0x0059
[PATCH] PCI: nVidia quirk to make AER PCI-E extended capability visible The nVidia CK804 PCI-E chipset supports the AER extended capability but sometimes fails to link it (with some BIOS or after a warm reboot). It makes the AER cap invisible to pci_find_ext_capability(). The patch adds a quirk to set the missing bit that controls the linking of the capability. By the way, it removes the corresponding code in the myri10ge driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Loic Prylli <loic@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-14 02:35:42 +08:00
#define PCI_DEVICE_ID_NVIDIA_CK804_PCIE 0x005d
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064
#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE 0x0065
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_NVIDIA_MCP2_MODEM 0x0069
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO 0x006a
#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS 0x0084
#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE 0x0085
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_NVIDIA_MCP2S_MODEM 0x0089
#define PCI_DEVICE_ID_NVIDIA_CK8_AUDIO 0x008a
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA 0x008e
[PATCH] nvidiafb: Geforce 7800 series support added This adds support for the Nvidia Geforce 7800 series of cards to the nvidiafb framebuffer driver. All it does is add the PCI device id for the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work on these cards. I also added the relevant PCI device ids to linux/pci_ids.h I tested it on my 7800 GTX here and it works like a charm. I now can get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text mode to make your eyes BLEED. ;) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-05 09:38:04 +08:00
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GT 0x0090
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GTX 0x0091
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800 0x0098
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800_GTX 0x0099
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NVIDIA_ITNT2 0x00A0
#define PCI_DEVICE_ID_GEFORCE_6800A 0x00c1
#define PCI_DEVICE_ID_GEFORCE_6800A_LE 0x00c2
#define PCI_DEVICE_ID_GEFORCE_GO_6800 0x00c8
#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA 0x00c9
#define PCI_DEVICE_ID_QUADRO_FX_GO1400 0x00cc
#define PCI_DEVICE_ID_QUADRO_FX_1400 0x00ce
#define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1
#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4
#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_NVIDIA_MCP3_MODEM 0x00d9
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da
#define PCI_DEVICE_ID_NVIDIA_NFORCE3S 0x00e1
#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA 0x00e3
#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS 0x00e4
#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE 0x00e5
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_NVIDIA_CK8S_AUDIO 0x00ea
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2 0x00ee
[PATCH] nvidiafb: Add support for some pci-e chipsets Chipsets with PCI device ids & 0xf0 == 0x00f0 has their actual chipset type in offset 0x1800 of the mmio space. Add support for this. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 12:53:33 +08:00
#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_ALT1 0x00f0
#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT1 0x00f1
#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT2 0x00f2
#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6200_ALT1 0x00f3
#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_GT 0x00f9
[PATCH] Add ID for Quadro NVS280 Quadro NVS280 is a dual-head PCIe card with PCI ID 10de:00fd and subsystem ID 10de:0215. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 17:17:36 +08:00
#define PCIE_DEVICE_ID_NVIDIA_QUADRO_NVS280 0x00fd
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR 0x0100
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR 0x0101
#define PCI_DEVICE_ID_NVIDIA_QUADRO 0x0103
#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX 0x0110
#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2 0x0111
#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO 0x0112
#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR 0x0113
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT 0x0140
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600 0x0141
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL 0x0145
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540 0x014E
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200 0x014F
#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS 0x0150
#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2 0x0151
#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA 0x0152
#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO 0x0153
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200 0x0164
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250 0x0166
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1 0x0167
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1 0x0168
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460 0x0170
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440 0x0171
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420 0x0172
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE 0x0173
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO 0x0174
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO 0x0175
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO 0x0177
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL 0x0178
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200 0x017A
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL 0x017B
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL 0x017C
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183
[PATCH] nvidiafb: Add support for Geforce4 MX 4000 Add support for Geforce4 MX 4000 (0x185) Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-12 09:56:07 +08:00
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_4000 0x0185
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO 0x0186
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO 0x0187
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL 0x0188
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC 0x0189
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS 0x018A
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL 0x018B
#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2 0x01a0
#define PCI_DEVICE_ID_NVIDIA_NFORCE 0x01a4
#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO 0x01b1
#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS 0x01b4
#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE 0x01bc
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_NVIDIA_MCP1_MODEM 0x01c1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE2 0x01e0
#define PCI_DEVICE_ID_NVIDIA_GEFORCE3 0x0200
#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1 0x0201
#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2 0x0202
#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC 0x0203
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B 0x0211
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE 0x0212
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT 0x0215
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600 0x0250
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400 0x0251
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200 0x0253
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL 0x0258
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL 0x0259
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL 0x025B
[PATCH] I2C: i2c-nforce2: Add support for the nForce4 MCP51 and MCP55 Add support for the new nForce4 MCP51 (also known as nForce 410 or 430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes were required because the base I/O address registers have changed in these versions. Standard BARs are now being used, while the original nForce2 chips used non-standard ones. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-25 20:18:16 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS 0x0264
[PATCH] PCI: amd74xx patch for new NVIDIA device IDs Here's the 2.6 amd74xx patch for NVIDIA MCP51. Signed-off-by: Andy Currid <acurrid@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-23 23:55:45 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE 0x0265
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267
[PATCH] I2C: i2c-nforce2: Add support for the nForce4 MCP51 and MCP55 Add support for the new nForce4 MCP51 (also known as nForce 410 or 430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes were required because the base I/O address registers have changed in these versions. Standard BARs are now being used, while the original nForce2 chips used non-standard ones. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-25 20:18:16 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS 0x0368
[PATCH] amd74xx: support MCP55 device IDs From: Rob Punkunus <rpunkunus@nvidia.com> Rob Punkunus recently submitted a patch to enable support for MCP51/MCP55 in the amd74xx driver. This patch was whitespace-corrupted and didn't apply to 2.6.12 since MCP51 support was merged in the 2.6.12-rc series. Gentoo would like to support this hardware for our upcoming release media, so I fixed the patch, and here it is :) Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-07-03 23:37:18 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE 0x036E
[PATCH] Add NVIDIA device ID in sata_nv Signed-off-by: Andy Currid <acurrid@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-19 21:17:52 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA 0x037E
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2 0x037F
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO 0x0286
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL 0x0288
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL 0x0289
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL 0x028C
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA 0x0301
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800 0x0302
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000 0x0308
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000 0x0309
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA 0x0311
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600 0x0312
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE 0x0314
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600 0x031A
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650 0x031B
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700 0x031C
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200 0x0320
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA 0x0321
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1 0x0322
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE 0x0323
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200 0x0324
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250 0x0325
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500 0x0326
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100 0x0327
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32 0x0328
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200 0x0329
#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI 0x032A
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500 0x032B
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300 0x032C
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100 0x032D
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA 0x0330
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900 0x0331
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT 0x0332
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA 0x0333
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT 0x0334
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000 0x0338
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700 0x033F
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA 0x0341
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700 0x0342
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE 0x0343
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE 0x0344
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1 0x0347
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2 0x0348
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000 0x034C
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E
PCI: add quirk for non-symmetric-mode irq routing to versions 0 and 4 of the MCP55 northbridge A long time ago I worked on a RHEL5 bug in which kdump hung during boot on a set of systems. The systems hung because they never received timer interrupts during calibrate_delay. These systems also all had Opteron processors on a hypertransport bus, bridged to a pci bus via an Nvidia MCP55 northbridge chip. After much wrangling I managed to learn from Nvidia that they have an undocumented register in some versions of that chip which control how legacy interrupts are send to the cpu complex when the ioapic isn't active. Nvidia defaults this register to only send legacy interrupts to the BSP, so if kdump happens to boot on an AP, we never get timer interrupts and boom. I had initially used this quirk as a workaround, with my intent being to move apic initalization to an earlier point in the boot process, so the setting of the register would be irrelevant. Given the work involved in doing that however, the fragile nature of the apic initalization code, and the fact that, over the 2 years since we found this bug, the MCP55 is the only chip which seems to have this issue, I've figure at this point its likely safer to just carry the quirk around. By setting the referenced bits in this hidden register, interrupts will be broadcast to all cpus when the ioapic isn't active on the above described systems. Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-22 01:54:39 +08:00
#define PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0 0x0360
#define PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4 0x0364
[PATCH] forcedeth: Add support for new device id This is a multi-part message in MIME format.
2005-06-26 17:36:52 +08:00
#define PCI_DEVICE_ID_NVIDIA_NVENET_15 0x0373
[PATCH] sata_nv: Add MCP61 support Added MCP61 SATA support to sata_nv. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-21 06:54:26 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA 0x03E7
i2c-nforce2: Add support for the MCP61 and MCP65 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans-Frieder Vogt <hfvogt@gmx.net>
2007-05-02 05:26:29 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS 0x03EB
[PATCH] sata_nv: Add MCP61 support Added MCP61 SATA support to sata_nv. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-21 06:54:26 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE 0x03EC
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2 0x03F6
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3 0x03F7
i2c-nforce2: Add support for the MCP61 and MCP65 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans-Frieder Vogt <hfvogt@gmx.net>
2007-05-02 05:26:29 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS 0x0446
[PATCH] ata: add some NVIDIA chipset IDs From: Randy Dunlap <randy.dunlap@oracle.com> Add some nVidia chipset ID's support. http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=b407680553280f9999a20706d5ab2a3be65312c1;hp=ce4cb48010ab2cca537432b5ccb47d4b1fb489e5 Snagged from lkml. Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-25 16:36:55 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE 0x0448
i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79 The MCP78S and MCP79 appear to be compatible with the previous nForce chips as far as the SMBus controller is concerned. The MCP67 and MCP73 were not tested yet but I'd be very surprised if they weren't compatible too. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Oleg Ryjkov <olegr@olegr.ca> Cc: Malcolm Lalkaka <mlalkaka@gmail.com> Cc: Zbigniew Luszpinski <zbiggy@o2.pl>
2009-03-29 04:34:41 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS 0x0542
pci_ids.h: Add NVIDIA PCI ID Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-03 07:55:48 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE 0x0560
Add the PATA controller device ID to pci_ids.h for MCP73/MCP77. Add the PATA controller device ID to pci_ids.h for MCP73/MCP77. Signed-off-by: Peer Chen <peerchen@gmail.com> Cc: Alan Cox <alan@redhat.com>, Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-06-08 21:14:32 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE 0x056C
i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79 The MCP78S and MCP79 appear to be compatible with the previous nForce chips as far as the SMBus controller is concerned. The MCP67 and MCP73 were not tested yet but I'd be very surprised if they weren't compatible too. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Oleg Ryjkov <olegr@olegr.ca> Cc: Malcolm Lalkaka <mlalkaka@gmail.com> Cc: Zbigniew Luszpinski <zbiggy@o2.pl>
2009-03-29 04:34:41 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS 0x0752
Add the PATA controller device ID to pci_ids.h for MCP73/MCP77. Add the PATA controller device ID to pci_ids.h for MCP73/MCP77. Signed-off-by: Peer Chen <peerchen@gmail.com> Cc: Alan Cox <alan@redhat.com>, Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-06-08 21:14:32 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE 0x0759
i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79 The MCP78S and MCP79 appear to be compatible with the previous nForce chips as far as the SMBus controller is concerned. The MCP67 and MCP73 were not tested yet but I'd be very surprised if they weren't compatible too. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Oleg Ryjkov <olegr@olegr.ca> Cc: Malcolm Lalkaka <mlalkaka@gmail.com> Cc: Zbigniew Luszpinski <zbiggy@o2.pl>
2009-03-29 04:34:41 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS 0x07D8
PCI: Enable NVIDIA HDA controllers Many NVIDIA GPUs can be configured as either a single-function video device or a multi-function device with video at function 0 and an HDA audio controller at function 1. The HDA controller can be enabled or disabled by a bit in the function 0 config space. Some BIOSes leave the HDA disabled, which means the HDMI connector from the NVIDIA GPU may not work. Sometimes the BIOS enables the HDA if an HDMI cable is connected at boot time, but that doesn't handle hotplug cases. Enable the HDA controller on device enumeration and resume and re-read the header type, which tells us whether the GPU is a multi-function device. This quirk is limited to NVIDIA PCI devices with the VGA Controller device class. This is expected to correspond to product configurations where the NVIDIA GPU has connectors attached. Other products where the device class is 3D Controller are expected to correspond to configurations where the NVIDIA GPU is dedicated (dGPU) and has no connectors. See original post (URL below) for more details. This commit takes inspiration from an earlier patch by Daniel Drake. Link: https://lore.kernel.org/r/20190708051744.24039-1-drake@endlessm.com v2 Link: https://lore.kernel.org/r/20190613063514.15317-1-drake@endlessm.com v1 Link: https://devtalk.nvidia.com/default/topic/1024022 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75985 Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Drake <drake@endlessm.com> [bhelgaas: commit log, log message, return early if already enabled] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Aaron Plattner <aplattner@nvidia.com> Cc: Peter Wu <peter@lekensteyn.nl> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Karol Herbst <kherbst@redhat.com> Cc: Maik Freudenberg <hhfeuer@gmx.de>
2019-07-08 13:17:44 +08:00
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_320M 0x08A0
i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79 The MCP78S and MCP79 appear to be compatible with the previous nForce chips as far as the SMBus controller is concerned. The MCP67 and MCP73 were not tested yet but I'd be very surprised if they weren't compatible too. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Oleg Ryjkov <olegr@olegr.ca> Cc: Malcolm Lalkaka <mlalkaka@gmail.com> Cc: Zbigniew Luszpinski <zbiggy@o2.pl>
2009-03-29 04:34:41 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS 0x0AA2
ahci,ata_generic: let ata_generic handle new MBP w/ MCP89 For yet unknown reason, MCP89 on MBP 7,1 doesn't work w/ ahci under linux but the controller doesn't require explicit mode setting and works fine with ata_generic. Make ahci ignore the controller on MBP 7,1 and let ata_generic take it for now. Reported in bko#15923. https://bugzilla.kernel.org/show_bug.cgi?id=15923 NVIDIA is investigating why ahci mode doesn't work. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peer Chen <pchen@nvidia.com> Cc: stable@kernel.org Reported-by: Anders Østhus <grapz666@gmail.com> Reported-by: Andreas Graf <andreas_graf@csgraf.de> Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Reported-by: Damien Cassou <damien.cassou@gmail.com> Reported-by: tixetsal@juno.com Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-06-17 17:42:22 +08:00
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA 0x0D85
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_IMS 0x10e0
#define PCI_DEVICE_ID_IMS_TT128 0x9128
#define PCI_DEVICE_ID_IMS_TT3D 0x9135
pci_ids.h: move PCI_VENDOR_ID_AMCC here PCI_VENDOR_ID_AMCC is defined locally in "drivers/staging/comedi/comedidev.h" for a few comedi hardware drivers, namely "adl_pci9118", "addi_apci_1500" and "addi_apci_3120" (also "addi_apci_1710" but that is not currently built and will probably be removed soon). Move the define into "include/linux/pci_ids.h" as it is shared by several drivers (albeit all comedi drivers currently). PCI_VENDOR_ID_AMCC happens to have the same value (0x10e8) as PCI_VENDOR_ID_ADDIDATA_OLD. The vendor ID is actually assigned to Applied Micro Circuits Corporation and Addi-Data were using device IDs assigned by AMCC on some of their earlier PCI boards. The PCI_VENDOR_ID_ADDIDATA_OLD define is still being used by the "8250_pci" PCI serial board driver. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16 23:14:38 +08:00
#define PCI_VENDOR_ID_AMCC 0x10e8
PCI: Add ACS quirk for Ampere root ports The Ampere Computing PCIe root port does not support ACS at this point. However, the hardware provides isolation and source validation through the SMMU. The stream ID generated by the PCIe ports contain both the bus/device/function number as well as the port ID in its 3 most significant bits. Turn on ACS but disable all the peer-to-peer features. APM is being rebranded to Ampere. The Vendor and Device IDs change, but the functionality stays the same. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-02-21 11:19:27 +08:00
#define PCI_VENDOR_ID_AMPERE 0x1def
pci_ids.h: move PCI_VENDOR_ID_AMCC here PCI_VENDOR_ID_AMCC is defined locally in "drivers/staging/comedi/comedidev.h" for a few comedi hardware drivers, namely "adl_pci9118", "addi_apci_1500" and "addi_apci_3120" (also "addi_apci_1710" but that is not currently built and will probably be removed soon). Move the define into "include/linux/pci_ids.h" as it is shared by several drivers (albeit all comedi drivers currently). PCI_VENDOR_ID_AMCC happens to have the same value (0x10e8) as PCI_VENDOR_ID_ADDIDATA_OLD. The vendor ID is actually assigned to Applied Micro Circuits Corporation and Addi-Data were using device IDs assigned by AMCC on some of their earlier PCI boards. The PCI_VENDOR_ID_ADDIDATA_OLD define is still being used by the "8250_pci" PCI serial board driver. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-16 23:14:38 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_INTERG 0x10ea
#define PCI_DEVICE_ID_INTERG_1682 0x1682
#define PCI_DEVICE_ID_INTERG_2000 0x2000
#define PCI_DEVICE_ID_INTERG_2010 0x2010
#define PCI_DEVICE_ID_INTERG_5000 0x5000
#define PCI_DEVICE_ID_INTERG_5050 0x5050
#define PCI_VENDOR_ID_REALTEK 0x10ec
#define PCI_DEVICE_ID_REALTEK_8139 0x8139
#define PCI_VENDOR_ID_XILINX 0x10ee
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_RME_DIGI96 0x3fc0
#define PCI_DEVICE_ID_RME_DIGI96_8 0x3fc1
#define PCI_DEVICE_ID_RME_DIGI96_8_PRO 0x3fc2
[PATCH] add PCI IDs so RME32 and RME96 drivers build While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-15 05:19:17 +08:00
#define PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST 0x3fc3
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP 0x3fc5
#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI 0x3fc6
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_INIT 0x1101
[PATCH] pci_ids: cleanup comments pci_ids.h cleanup: convert // comment to /* comment */ Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-20 07:55:32 +08:00
#define PCI_VENDOR_ID_CREATIVE 0x1102 /* duplicate: ECTIVA */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002
ALSA: ctxfi - Move PCI ID definitions to linux/pci_ids.h Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14 21:14:18 +08:00
#define PCI_DEVICE_ID_CREATIVE_20K1 0x0005
#define PCI_DEVICE_ID_CREATIVE_20K2 0x000b
#define PCI_SUBDEVICE_ID_CREATIVE_SB0760 0x0024
#define PCI_SUBDEVICE_ID_CREATIVE_SB08801 0x0041
#define PCI_SUBDEVICE_ID_CREATIVE_SB08802 0x0042
#define PCI_SUBDEVICE_ID_CREATIVE_SB08803 0x0043
ALSA: ctxfi: Add support for Creative Titanium HD Initialise model-specific DAC and ADC parts. Add controls for output and mic source selection. Rename some mixer controls according to ControlNames.txt. Remove Playback switches for Line-in and IEC958-in - these were controlling the input mute/unmute which affected capture too. Use the capture switches to control the input mute/unmute instead - it's less confusing. Initialise the WM8775 to invert the left-right clock to swap the left and right channels of the mic and aux input. Signed-off-by: Harry Butterworth <heb1001@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-11 16:02:06 +08:00
#define PCI_SUBDEVICE_ID_CREATIVE_SB1270 0x0062
ALSA: ctxfi - Move PCI ID definitions to linux/pci_ids.h Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14 21:14:18 +08:00
#define PCI_SUBDEVICE_ID_CREATIVE_HENDRIX 0x6000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] pci_ids: cleanup comments pci_ids.h cleanup: convert // comment to /* comment */ Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-20 07:55:32 +08:00
#define PCI_VENDOR_ID_ECTIVA 0x1102 /* duplicate: CREATIVE */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_ECTIVA_EV1938 0x8938
#define PCI_VENDOR_ID_TTI 0x1103
#define PCI_DEVICE_ID_TTI_HPT343 0x0003
#define PCI_DEVICE_ID_TTI_HPT366 0x0004
#define PCI_DEVICE_ID_TTI_HPT372 0x0005
#define PCI_DEVICE_ID_TTI_HPT302 0x0006
#define PCI_DEVICE_ID_TTI_HPT371 0x0007
#define PCI_DEVICE_ID_TTI_HPT374 0x0008
[PATCH] pci_ids: cleanup comments pci_ids.h cleanup: convert // comment to /* comment */ Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-20 07:55:32 +08:00
#define PCI_DEVICE_ID_TTI_HPT372N 0x0009 /* apparently a 372N variant? */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support This driver is required to work around several hardware bugs in the PCIe controller. The SMP8759 does not support legacy interrupts or IO space. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> [bhelgaas: add CONFIG_BROKEN dependency, various cleanups] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-06-20 16:17:40 +08:00
#define PCI_VENDOR_ID_SIGMA 0x1105
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_VIA 0x1106
#define PCI_DEVICE_ID_VIA_8763_0 0x0198
#define PCI_DEVICE_ID_VIA_8380_0 0x0204
#define PCI_DEVICE_ID_VIA_3238_0 0x0238
#define PCI_DEVICE_ID_VIA_PT880 0x0258
[AGPGART] VIA PT880 Ultra support. This patch enables agpgart on a Via "PT880 Ultra" based motherboard (Asus P4V800D-X). The PCI ID of the PT880 Ultra is 0x0308 instead of 0x0258 of the PT880. The patched via-agp passes testgart. Signed-off-by: Magnus Kessler <Magnus.Kessler@gmx.net> Signed-off-by: Dave Jones <davej@redhat.com>
2006-05-22 17:53:10 +08:00
#define PCI_DEVICE_ID_VIA_PT880ULTRA 0x0308
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259
#define PCI_DEVICE_ID_VIA_3269_0 0x0269
#define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282
[PATCH] PCI identifiers for the pata_via update These IDs are also used by the drivers/ide/pci changes submitted by VIA. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24 21:06:11 +08:00
#define PCI_DEVICE_ID_VIA_3296_0 0x0296
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_VIA_8363_0 0x0305
[AGPGART] Support VIA P4M800CE bridge. Signed-off-by: Dave Jones <davej@redhat.com>
2005-11-21 22:53:16 +08:00
#define PCI_DEVICE_ID_VIA_P4M800CE 0x0314
[AGPGART] Add new IDs to VIA AGP. Culled from the VIA codedrop. Also fixes up one ID used in amd64-agp to use the VIA part number instead of the board name in its ID. Signed-off-by: Dave Jones <davej@redhat.com>
2007-01-29 06:58:33 +08:00
#define PCI_DEVICE_ID_VIA_P4M890 0x0327
[AGPGART] Fix wrong ID in via-agp.c there is a wrong id in drivers/char/agp/via-agp.c #define PCI_DEVICE_ID_VIA_CX700 0x8324 It must be 0x0324 Notice that PCI_DEVICE_ID_VIA_CX700 is also used in drivers/i2c/busses/i2c-viapro.c and drivers/ide/pci/via82cxxx.c So, I think that constant must be renamed to avoid conflicting. I attached a proposed patch. Signed-off-by: Dave Jones <davej@redhat.com>
2007-05-08 05:55:13 +08:00
#define PCI_DEVICE_ID_VIA_VT3324 0x0324
[AGPGART] Add new IDs to VIA AGP. Culled from the VIA codedrop. Also fixes up one ID used in amd64-agp to use the VIA part number instead of the board name in its ID. Signed-off-by: Dave Jones <davej@redhat.com>
2007-01-29 06:58:33 +08:00
#define PCI_DEVICE_ID_VIA_VT3336 0x0336
PCI: quirk disable MSI on via vt3351 The Via VT3351 APIC does not play well with MSI and unleashes a flood of APIC errors when MSI is used to deliver interrupts. The problem was recently exposed when the atl1 network device driver, which enables MSI by default, stimulated APIC errors on an Asus M2V mainboard, which employs the Via VT3351. See http://bugzilla.kernel.org/show_bug.cgi?id=8472 for additional details on this bug. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-27 06:01:04 +08:00
#define PCI_DEVICE_ID_VIA_VT3351 0x0351
agp: Add device id for P4M900 to via-agp module Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25 16:10:52 +08:00
#define PCI_DEVICE_ID_VIA_VT3364 0x0364
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_VIA_8371_0 0x0391
Add support for VT6415 PCIE PATA IDE Host Controller Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 08:33:34 +08:00
#define PCI_DEVICE_ID_VIA_6415 0x0415
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_VIA_8501_0 0x0501
#define PCI_DEVICE_ID_VIA_82C561 0x0561
#define PCI_DEVICE_ID_VIA_82C586_1 0x0571
#define PCI_DEVICE_ID_VIA_82C576 0x0576
#define PCI_DEVICE_ID_VIA_82C586_0 0x0586
#define PCI_DEVICE_ID_VIA_82C596 0x0596
#define PCI_DEVICE_ID_VIA_82C597_0 0x0597
#define PCI_DEVICE_ID_VIA_82C598_0 0x0598
#define PCI_DEVICE_ID_VIA_8601_0 0x0601
#define PCI_DEVICE_ID_VIA_8605_0 0x0605
#define PCI_DEVICE_ID_VIA_82C686 0x0686
#define PCI_DEVICE_ID_VIA_82C691_0 0x0691
#define PCI_DEVICE_ID_VIA_82C576_1 0x1571
#define PCI_DEVICE_ID_VIA_82C586_2 0x3038
#define PCI_DEVICE_ID_VIA_82C586_3 0x3040
#define PCI_DEVICE_ID_VIA_82C596_3 0x3050
#define PCI_DEVICE_ID_VIA_82C596B_3 0x3051
#define PCI_DEVICE_ID_VIA_82C686_4 0x3057
#define PCI_DEVICE_ID_VIA_82C686_5 0x3058
#define PCI_DEVICE_ID_VIA_8233_5 0x3059
#define PCI_DEVICE_ID_VIA_8233_0 0x3074
#define PCI_DEVICE_ID_VIA_8633_0 0x3091
#define PCI_DEVICE_ID_VIA_8367_0 0x3099
#define PCI_DEVICE_ID_VIA_8653_0 0x3101
#define PCI_DEVICE_ID_VIA_8622 0x3102
USB: Add VIA quirk fixup for VT8235 usb2 Patch to add VIA PCI quirk for Enhanced/Extended USB on VT8235 southbridge. It is needed in order to use EHCI/USB 2.0 with ACPI. Without it IRQs are not routed correctly, you get an "Unlink after no-IRQ?" error and the device is unusable. I belive this could also be a fix for Bugzilla Bug 5835. Signed-off-by: Mark Hindley <mark@hindley.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-29 03:43:25 +08:00
#define PCI_DEVICE_ID_VIA_8235_USB_2 0x3104
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_VIA_8233C_0 0x3109
#define PCI_DEVICE_ID_VIA_8361 0x3112
#define PCI_DEVICE_ID_VIA_XM266 0x3116
#define PCI_DEVICE_ID_VIA_612X 0x3119
#define PCI_DEVICE_ID_VIA_862X_0 0x3123
#define PCI_DEVICE_ID_VIA_8753_0 0x3128
#define PCI_DEVICE_ID_VIA_8233A 0x3147
#define PCI_DEVICE_ID_VIA_8703_51_0 0x3148
#define PCI_DEVICE_ID_VIA_8237_SATA 0x3149
#define PCI_DEVICE_ID_VIA_XN266 0x3156
[PATCH] via82cxxx: add VIA VT6410 IDE support From: Mathias Kretschmer <posting@blx4.net> Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-20 04:32:38 +08:00
#define PCI_DEVICE_ID_VIA_6410 0x3164
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_VIA_8754C_0 0x3168
#define PCI_DEVICE_ID_VIA_8235 0x3177
#define PCI_DEVICE_ID_VIA_8385_0 0x3188
#define PCI_DEVICE_ID_VIA_8377_0 0x3189
#define PCI_DEVICE_ID_VIA_8378_0 0x3205
#define PCI_DEVICE_ID_VIA_8783_0 0x3208
#define PCI_DEVICE_ID_VIA_8237 0x3227
[PATCH] via82cxxx IDE: Add VT8251 ISA bridge Some motherboards (such as the Asus P5V800-MX) ship a PCI_DEVICE_ID_VIA_82C586_1 IDE controller alongside a VT8251 southbridge. This southbridge is currently unrecognised in the via82cxxx IDE driver, preventing those users from getting DMA access to disks. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15 09:11:55 +08:00
#define PCI_DEVICE_ID_VIA_8251 0x3287
[libata] pata_via: support VX855, future chips whose IDE controller use 0x0571 It supports VX855 and future chips whose IDE controller uses PCI ID 0x0571. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-23 15:37:39 +08:00
#define PCI_DEVICE_ID_VIA_8261 0x3402
[PATCH] PCI identifiers for the pata_via update These IDs are also used by the drivers/ide/pci changes submitted by VIA. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24 21:06:11 +08:00
#define PCI_DEVICE_ID_VIA_8237A 0x3337
via82cxxx/pata_via: correct PCI_DEVICE_ID_VIA_SATA_EIDE ID and add support for CX700 and 8237S This patch: * Corrects the wrong device ID of PCI_DEVICE_ID_VIA_SATA_EIDE from 0x0581 to 0x5324. * Adds VIA CX700 and VT8237S support in drivers/ide/pci/via82cxxx.c * Adds VIA VT8237S support in drivers/ata/pata_via.c Signed-off-by: Josepch Chan <josephchan@via.com.tw> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-01-27 20:47:08 +08:00
#define PCI_DEVICE_ID_VIA_8237S 0x3372
#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_VIA_8231 0x8231
#define PCI_DEVICE_ID_VIA_8231_4 0x8235
#define PCI_DEVICE_ID_VIA_8365_1 0x8305
[PATCH] PCI identifiers for the pata_via update These IDs are also used by the drivers/ide/pci changes submitted by VIA. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24 21:06:11 +08:00
#define PCI_DEVICE_ID_VIA_CX700 0x8324
via82cxxx: add new PCI id for cx700 [bart: manually ported it over via82cxxx changes] From: Andrew Smith <asmith@tranquility.fsbusiness.co.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19 08:41:26 +08:00
#define PCI_DEVICE_ID_VIA_CX700_IDE 0x0581
[libata, IDE] add new VIA bridge to VIA PATA drivers Signed-off-by: Joseph Chan <josephchan@via.com.tw> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-11 10:06:01 +08:00
#define PCI_DEVICE_ID_VIA_VX800 0x8353
[libata] pata_via: support VX855, future chips whose IDE controller use 0x0571 It supports VX855 and future chips whose IDE controller uses PCI ID 0x0571. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-23 15:37:39 +08:00
#define PCI_DEVICE_ID_VIA_VX855 0x8409
i2c-viapro: Add VIA VX900 device ID The SMBus controller in the VIA VX900 appears to be compatible with the VIA VX855, so just add the device ID. This closes kernel bug #43096. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-10-06 04:23:53 +08:00
#define PCI_DEVICE_ID_VIA_VX900 0x8410
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_VIA_8371_1 0x8391
#define PCI_DEVICE_ID_VIA_82C598_1 0x8598
#define PCI_DEVICE_ID_VIA_838X_1 0xB188
#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198
via82cxxx: Add VIA VX855 PCI Device ID This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Bruce Chang <BruceChang@via.com.tw> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22 22:23:39 +08:00
#define PCI_DEVICE_ID_VIA_VX855_IDE 0xC409
[libata] pata_via: support VX855, future chips whose IDE controller use 0x0571 It supports VX855 and future chips whose IDE controller uses PCI ID 0x0571. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-23 15:37:39 +08:00
#define PCI_DEVICE_ID_VIA_ANON 0xFFFF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_SIEMENS 0x110A
#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
#define PCI_VENDOR_ID_VORTEX 0x1119
#define PCI_DEVICE_ID_VORTEX_GDT60x0 0x0000
#define PCI_DEVICE_ID_VORTEX_GDT6000B 0x0001
#define PCI_DEVICE_ID_VORTEX_GDT6x10 0x0002
#define PCI_DEVICE_ID_VORTEX_GDT6x20 0x0003
#define PCI_DEVICE_ID_VORTEX_GDT6530 0x0004
#define PCI_DEVICE_ID_VORTEX_GDT6550 0x0005
#define PCI_DEVICE_ID_VORTEX_GDT6x17 0x0006
#define PCI_DEVICE_ID_VORTEX_GDT6x27 0x0007
#define PCI_DEVICE_ID_VORTEX_GDT6537 0x0008
#define PCI_DEVICE_ID_VORTEX_GDT6557 0x0009
#define PCI_DEVICE_ID_VORTEX_GDT6x15 0x000a
#define PCI_DEVICE_ID_VORTEX_GDT6x25 0x000b
#define PCI_DEVICE_ID_VORTEX_GDT6535 0x000c
#define PCI_DEVICE_ID_VORTEX_GDT6555 0x000d
#define PCI_DEVICE_ID_VORTEX_GDT6x17RP 0x0100
#define PCI_DEVICE_ID_VORTEX_GDT6x27RP 0x0101
#define PCI_DEVICE_ID_VORTEX_GDT6537RP 0x0102
#define PCI_DEVICE_ID_VORTEX_GDT6557RP 0x0103
#define PCI_DEVICE_ID_VORTEX_GDT6x11RP 0x0104
#define PCI_DEVICE_ID_VORTEX_GDT6x21RP 0x0105
#define PCI_VENDOR_ID_EF 0x111a
#define PCI_DEVICE_ID_EF_ATM_FPGA 0x0000
#define PCI_DEVICE_ID_EF_ATM_ASIC 0x0002
PCI: ATM: lanai, change VENDOR to DEVICE lanai, change VENDOR to DEVICE There were 2 bad named macros in pci_ids (LANAI 2 and IHB). Rename it to DEVICE, because it's device id. Also make some cleanpu in pci_device_id table (use PCI_VDEVICE). Cc: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-18 16:58:13 +08:00
#define PCI_DEVICE_ID_EF_ATM_LANAI2 0x0003
#define PCI_DEVICE_ID_EF_ATM_LANAIHB 0x0005
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_IDT 0x111d
#define PCI_DEVICE_ID_IDT_IDT77201 0x0001
#define PCI_VENDOR_ID_FORE 0x1127
#define PCI_DEVICE_ID_FORE_PCA200E 0x0300
#define PCI_VENDOR_ID_PHILIPS 0x1131
#define PCI_DEVICE_ID_PHILIPS_SAA7146 0x7146
#define PCI_DEVICE_ID_PHILIPS_SAA9730 0x9730
#define PCI_VENDOR_ID_EICON 0x1133
#define PCI_DEVICE_ID_EICON_DIVA20 0xe002
#define PCI_DEVICE_ID_EICON_DIVA20_U 0xe004
#define PCI_DEVICE_ID_EICON_DIVA201 0xe005
#define PCI_DEVICE_ID_EICON_DIVA202 0xe00b
#define PCI_DEVICE_ID_EICON_MAESTRA 0xe010
#define PCI_DEVICE_ID_EICON_MAESTRAQ 0xe012
#define PCI_DEVICE_ID_EICON_MAESTRAQ_U 0xe013
#define PCI_DEVICE_ID_EICON_MAESTRAP 0xe014
enic: add Cisco 10G Ethernet NIC driver Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-16 00:17:11 +08:00
#define PCI_VENDOR_ID_CISCO 0x1137
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_ZIATECH 0x1138
#define PCI_DEVICE_ID_ZIATECH_5550_HC 0x5550
i7300_edac: start a driver for i7300 chipset (Clarksboro) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-25 10:22:57 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_SYSKONNECT 0x1148
#define PCI_DEVICE_ID_SYSKONNECT_TR 0x4200
#define PCI_DEVICE_ID_SYSKONNECT_GE 0x4300
#define PCI_DEVICE_ID_SYSKONNECT_YU 0x4320
#define PCI_DEVICE_ID_SYSKONNECT_9DXX 0x4400
#define PCI_DEVICE_ID_SYSKONNECT_9MXX 0x4500
#define PCI_VENDOR_ID_DIGI 0x114f
#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E 0x0070
#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071
#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072
#define PCI_DEVICE_ID_DIGI_DF_M_A 0x0073
jsm: additional device support I have a Digi Neo 8 PCI card (114f:00b1) Serial controller: Digi International Digi Neo 8 (rev 05) that works with the jsm driver after using the following patch. Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Cc: Scott H Kilau <Scott_Kilau@digi.com> Cc: Wendy Xiong <wendyx@us.ibm.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-19 06:48:34 +08:00
#define PCI_DEVICE_ID_DIGI_NEO_8 0x00B1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_NEO_2DB9 0x00C8
#define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9
#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
jsm: add new supported board to jsm serial driver Add new PCI Express Neo/JSM board to the supported list of drivers in the JSM driver. Signed-off-by: Scott Kilau <scottk@digi.com> Acked-by: Ananda V <avenkat@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 19:35:00 +08:00
#define PCIE_DEVICE_ID_NEO_4_IBM 0x00F4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_XIRCOM 0x115d
#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101
#define PCI_DEVICE_ID_XIRCOM_X3201_MDM 0x0103
#define PCI_VENDOR_ID_SERVERWORKS 0x1166
#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008
#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009
#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge. This is the fix for the following problem: https://bugzilla.redhat.com/show_bug.cgi?id=227657 The bnx2 device 5706 complains about MSI not working behind a ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem: e3008dedff4bdc96a5f67224cd3d8d12237082a0: "PCI: disable MSI by default on systems with Serverworks HT1000 chips" was not entirely correct, and has been reverted. MSI does not work on the PCIX bus because the BIOS did not set the HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the bridge. We use the existing quirk_msi_ht_cap() to detect the problem and disable MSI in all buses behind it. Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: Anantha Subramanyam <ananth@broadcom.com> Cc: Naren Sankar <nsankar@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25 16:15:53 +08:00
#define PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB 0x0036
[TG3]: 40-bit DMA workaround part 2 The 40-bit DMA workaround recently implemented for 5714, 5715, and 5780 needs to be expanded because there may be other tg3 devices behind the EPB Express to PCIX bridge in the 5780 class device. For example, some 4-port card or mother board designs have 5704 behind the 5714. All devices behind the EPB require the 40-bit DMA workaround. Thanks to Chris Elmquist again for reporting the problem and testing the patch. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 05:21:12 +08:00
#define PCI_DEVICE_ID_SERVERWORKS_EPB 0x0103
MSI: Blacklist PCI-E chipsets depending on Hypertransport MSI capability Introduce msi_ht_cap_enabled() to check the MSI capability in the Hypertransport configuration space. It is used in a generic quirk quirk_msi_ht_cap() to check whether MSI is enabled on hypertransport chipset, and a nVidia specific quirk quirk_nvidia_ck804_msi_ht_cap() where two 2 HT MSI mappings have to be checked. Both quirks set the PCI_BUS_FLAGS_NO_MSI bus flag when MSI is disabled. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-31 13:55:32 +08:00
#define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE 0x0132
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200
#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201
#define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203
[PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 support Add Broadcom HT-1000 south bridge's PCI ID to i2c-piix driver. Note that at least on Supermicro H8SSL it uses non-standard SMBHSTCFG = 3 and standard values like 0 or 9 causes hangup. Signed-off-by: Martin Devera <devik@cdi.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-28 06:11:45 +08:00
#define PCI_DEVICE_ID_SERVERWORKS_HT1000SB 0x0205
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213
[PATCH] serverworks: add support for new southbridge IDE BCM5785 (HT1000) is a Opteron Southbridge from Serverworks/Broadcom that incorporates a single channel ATA100 IDE controller that is functionally identical to the Serverworks CSB6 IDE controller. This patch adds support for the new PCI device ID and also the support for this controller. Signed-off-by: Narendra Sankar <nsankar@broadcom.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-08-19 04:30:35 +08:00
#define PCI_DEVICE_ID_SERVERWORKS_HT1000IDE 0x0214
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217
[PATCH] tpm: TPMs on additional LPC bus Add support for TPMs on additional LPC buses. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:02:04 +08:00
#define PCI_DEVICE_ID_SERVERWORKS_CSB6LPC 0x0227
i2c-piix4: Add support for the Broadcom HT1100 chipset Add support for the Broadcom HT1100 LD chipset (SMBus function.) Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-29 04:34:46 +08:00
#define PCI_DEVICE_ID_SERVERWORKS_HT1100LD 0x0408
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PCI: Add Altera vendor ID Add the Altera PCI Vendor id to pci_ids.h and remove the private definitions from xillybus_pcie.c and altera-cvp.c. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Eli Billauer <eli.billauer@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Eli Billauer <eli.billauer@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-12 17:41:18 +08:00
#define PCI_VENDOR_ID_ALTERA 0x1172
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_SBE 0x1176
#define PCI_DEVICE_ID_SBE_WANXL100 0x0301
#define PCI_DEVICE_ID_SBE_WANXL200 0x0302
#define PCI_DEVICE_ID_SBE_WANXL400 0x0104
Tulip: don't initialize SBE xT3E3 WAN ports. SBE 2T3E3 cards use DECchips 21143 but they need a different driver. Don't even try to use a normal tulip driver with them. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03 07:03:29 +08:00
#define PCI_SUBDEVICE_ID_SBE_T3E3 0x0009
#define PCI_SUBDEVICE_ID_SBE_2T3E3_P0 0x0901
#define PCI_SUBDEVICE_ID_SBE_2T3E3_P1 0x0902
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_TOSHIBA 0x1179
pata_piccolo: Driver for old Toshiba chipsets We were never able to get docs for this out of Toshiba for years. Dave Barnes produced a NetBSD driver however and from that we can fill in the needed tables. As we correct the PCI identifiers a bit also update the old ide generic driver at the same time so it stays compiling. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-11-30 21:23:11 +08:00
#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1 0x0101
#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2 0x0102
#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_3 0x0103
#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_5 0x0105
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TOSHIBA_TOPIC95 0x060a
#define PCI_DEVICE_ID_TOSHIBA_TOPIC97 0x060f
#define PCI_DEVICE_ID_TOSHIBA_TOPIC100 0x0617
#define PCI_VENDOR_ID_TOSHIBA_2 0x102f
#define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030
tc35815 driver update (take 2) Current tc35815 driver is very obsolete and less maintained for a long time. Replace it with a new driver based on one from CELF patch archive. Major advantages of CELF version (version 1.23, for kernel 2.6.10) are: * Independent of JMR3927. (Actually independent of MIPS, but AFAIK the chip is used only on MIPS platforms) * TX4938 support. * 64-bit proof. * Asynchronous and on-demand auto negotiation. * High performance on non-coherent architecture. * ethtool support. * Many bugfixes and cleanups. And improvoments since version 1.23 are: * TX4939 support. * NETPOLL support. * NAPI support. (disabled by default) * Reduce memcpy on receiving. * PM support. * Many cleanups and bugfixes. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-03 22:54:59 +08:00
#define PCI_DEVICE_ID_TOSHIBA_TC35815_NWU 0x0031
#define PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939 0x0032
ide: add Toshiba TC86C001 IDE driver (take 2) This is the driver for the Toshiba TC86C001 GOKU-S PCI IDE controller, completely reworked from the original brain-damaged Toshiba's 2.4 version. This single channel UltraDMA/66 controller is very simple in programming, yet Toshiba managed to plant many interesting bugs in it. The particularly nasty "limitation 5" (as they call the errata) caused me to abuse the IDE core in a possibly most interesting way so far. However, this is still better than the #ifdef mess in drivers/ide/ide-io.c that the original version included (well, it had much more mess)... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Alan Cox <alan@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-08 01:18:45 +08:00
#define PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE 0x0105
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108
[PATCH] net: add driver for the NIC on Cell Blades This patch adds a driver for a new 1000 Mbit ethernet NIC. It is integrated on the south bridge that is used for our Cell Blades. The code gets the MAC address from the Open Firmware device tree, so it won't compile on platforms other than ppc64. This is the first public release, so I don't expect the first version to get merged, but I'd aim for integration within the 2.6.13 time frame. Cc: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-06 06:19:29 +08:00
#define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[SCSI] Addition to pci_ids.h for ATTO Technology, Inc. A new PCI_VENDOR_ID for pci_ids.h. signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 06:18:02 +08:00
#define PCI_VENDOR_ID_ATTO 0x117c
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_RICOH 0x1180
#define PCI_DEVICE_ID_RICOH_RL5C465 0x0465
#define PCI_DEVICE_ID_RICOH_RL5C466 0x0466
#define PCI_DEVICE_ID_RICOH_RL5C475 0x0475
#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476
#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478
[MMC] sdhci: Add SDHCI controller ids Add ids for SDHCI controllers so that they can be identified for quirks. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-30 17:22:32 +08:00
#define PCI_DEVICE_ID_RICOH_R5C822 0x0822
PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Chris Ball <cjb@laptop.org> CC: Manoj Iyer <manoj.iyer@canonical.com> CC: stable@vger.kernel.org
2012-12-02 04:37:20 +08:00
#define PCI_DEVICE_ID_RICOH_R5CE822 0xe822
mmc: Add PCI fixup quirks for Ricoh 1180:e823 reader Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-27 00:19:05 +08:00
#define PCI_DEVICE_ID_RICOH_R5CE823 0xe823
mmc: Disabler for Ricoh MMC controller Thanks to Matt Domsch and Rezwanul Kabir at Dell, we know how to disable the MMC controller on the multi-function Ricoh R5C832. The MMC controller needs to be disabled or it will steal MMC cards from the SD controller where they would otherwise be supported by the Linux SDHCI driver. Signed-off-by: Philipl Langdale <philipl@overt.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-16 03:54:08 +08:00
#define PCI_DEVICE_ID_RICOH_R5C832 0x0832
#define PCI_DEVICE_ID_RICOH_R5C843 0x0843
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_DLINK 0x1186
#define PCI_DEVICE_ID_DLINK_DGE510T 0x4c00
#define PCI_VENDOR_ID_ARTOP 0x1191
#define PCI_DEVICE_ID_ARTOP_ATP850UF 0x0005
#define PCI_DEVICE_ID_ARTOP_ATP860 0x0006
#define PCI_DEVICE_ID_ARTOP_ATP860R 0x0007
#define PCI_DEVICE_ID_ARTOP_ATP865 0x0008
#define PCI_DEVICE_ID_ARTOP_ATP865R 0x0009
libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers This is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls. Based on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes from Eric Uhrhane <ericu@google.com>. Signed-off-by: John(Jung-Ik) Lee <jilee@google.com> Reviewed-by: Grant Grundler <grundler@google.com> Reviewed-by: Gwendal Gringo <gwendal@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-15 12:32:33 +08:00
#define PCI_DEVICE_ID_ARTOP_ATP867A 0x000A
#define PCI_DEVICE_ID_ARTOP_ATP867B 0x000B
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_ARTOP_AEC7610 0x8002
#define PCI_DEVICE_ID_ARTOP_AEC7612UW 0x8010
#define PCI_DEVICE_ID_ARTOP_AEC7612U 0x8020
#define PCI_DEVICE_ID_ARTOP_AEC7612S 0x8030
#define PCI_DEVICE_ID_ARTOP_AEC7612D 0x8040
#define PCI_DEVICE_ID_ARTOP_AEC7612SUW 0x8050
#define PCI_DEVICE_ID_ARTOP_8060 0x8060
#define PCI_VENDOR_ID_ZEITNET 0x1193
#define PCI_DEVICE_ID_ZEITNET_1221 0x0001
#define PCI_DEVICE_ID_ZEITNET_1225 0x0002
#define PCI_VENDOR_ID_FUJITSU_ME 0x119e
#define PCI_DEVICE_ID_FUJITSU_FS155 0x0001
#define PCI_DEVICE_ID_FUJITSU_FS50 0x0003
#define PCI_SUBVENDOR_ID_KEYSPAN 0x11a9
#define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334
#define PCI_VENDOR_ID_MARVELL 0x11ab
PCI: Define macro for Marvell vendor ID Define PCI_VENDOR_ID_MARVELL_EXT macro for 0x1b4b vendor ID Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-03-21 12:34:56 +08:00
#define PCI_VENDOR_ID_MARVELL_EXT 0x1b4b
Add GT64111 PCI ID back Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-11-10 21:42:36 +08:00
#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430
#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460
#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480
[MTD] [NAND] Define and use PCI_DEVICE_ID_MARVELL_88ALP01_NAND for CAFÉ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-03 16:47:17 +08:00
#define PCI_DEVICE_ID_MARVELL_88ALP01_NAND 0x4100
Use PCI_DEVICE_ID_88ALP01 for CAFÉ chip, rather than PCI_DEVICE_ID_CAFE. Probably better to use the official designation. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-03 16:45:57 +08:00
#define PCI_DEVICE_ID_MARVELL_88ALP01_SD 0x4101
Define and use PCI_DEVICE_ID_MARVELL_88ALP01_CCIC for CAFÉ camera driver Also, stop looking at the NAND controller (0x4100) and checking the device class. For a while during development, all three functions on the chip had the same ID. We made them fix that fairly promptly, and we can forget about it now. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Jonathan Corbet <corbet@lwn.net>
2008-09-03 16:49:20 +08:00
#define PCI_DEVICE_ID_MARVELL_88ALP01_CCIC 0x4102
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_V3 0x11b0
#define PCI_DEVICE_ID_V3_V960 0x0001
#define PCI_DEVICE_ID_V3_V351 0x0002
#define PCI_VENDOR_ID_ATT 0x11c1
#define PCI_DEVICE_ID_ATT_VENUS_MODEM 0x480
#define PCI_VENDOR_ID_SPECIALIX 0x11cb
#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
#define PCI_VENDOR_ID_ANALOG_DEVICES 0x11d4
#define PCI_DEVICE_ID_AD1889JS 0x1889
#define PCI_DEVICE_ID_SEGA_BBA 0x1234
#define PCI_VENDOR_ID_ZORAN 0x11de
#define PCI_DEVICE_ID_ZORAN_36057 0x6057
#define PCI_DEVICE_ID_ZORAN_36120 0x6120
#define PCI_VENDOR_ID_COMPEX 0x11f6
#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112
[SCSI] pm8001: add SAS/SATA HBA driver This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based host adapters. Signed-off-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: Tom Peng <tom_peng@usish.com> Signed-off-by: Kevin Ao <aoqingyun@usish.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-14 16:19:21 +08:00
#define PCI_VENDOR_ID_PMC_Sierra 0x11f8
switchtec: Use generic PCI Vendor ID and Class Code Move the Microsemi Switchtec PCI Vendor ID (same as PCI_VENDOR_ID_PMC_Sierra) to pci_ids.h. Also, replace Microsemi class constants with the standard PCI definitions. Signed-off-by: Doug Meyer <dmeyer@gigaio.com> [bhelgaas: restore SPDX (I assume it was removed by mistake), remove device ID definitions] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2018-05-24 04:18:05 +08:00
#define PCI_VENDOR_ID_MICROSEMI 0x11f8
[SCSI] pm8001: add SAS/SATA HBA driver This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based host adapters. Signed-off-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: Tom Peng <tom_peng@usish.com> Signed-off-by: Kevin Ao <aoqingyun@usish.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-14 16:19:21 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_RP 0x11fe
#define PCI_VENDOR_ID_CYCLADES 0x120e
#define PCI_DEVICE_ID_PC300_RX_2 0x0300
#define PCI_DEVICE_ID_PC300_RX_1 0x0301
#define PCI_DEVICE_ID_PC300_TE_2 0x0310
#define PCI_DEVICE_ID_PC300_TE_1 0x0311
#define PCI_DEVICE_ID_PC300_TE_M_2 0x0320
#define PCI_DEVICE_ID_PC300_TE_M_1 0x0321
#define PCI_VENDOR_ID_ESSENTIAL 0x120f
#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER 0x0001
#define PCI_VENDOR_ID_O2 0x1217
#define PCI_DEVICE_ID_O2_6729 0x6729
#define PCI_DEVICE_ID_O2_6730 0x673a
#define PCI_DEVICE_ID_O2_6832 0x6832
#define PCI_DEVICE_ID_O2_6836 0x6836
pcmcia: drop already defined PCI_IDs Out of 10 PCI_IDs found in the PCMCIA subsystem, only two were not defined in pci_ids.h. Move them and drop the duplicates. Successfully build-tested. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-19 17:43:32 +08:00
#define PCI_DEVICE_ID_O2_6812 0x6872
#define PCI_DEVICE_ID_O2_6933 0x6933
mmc: sdhci: Disable ADMA on some O2Micro SD/MMC parts. This patch disables the broken ADMA on selected O2Micro devices. Signed-off-by: Jennifer Li <Jennifer.li@o2micro.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-18 12:01:59 +08:00
#define PCI_DEVICE_ID_O2_8120 0x8120
#define PCI_DEVICE_ID_O2_8220 0x8220
#define PCI_DEVICE_ID_O2_8221 0x8221
#define PCI_DEVICE_ID_O2_8320 0x8320
#define PCI_DEVICE_ID_O2_8321 0x8321
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_3DFX 0x121a
#define PCI_DEVICE_ID_3DFX_VOODOO 0x0001
#define PCI_DEVICE_ID_3DFX_VOODOO2 0x0002
#define PCI_DEVICE_ID_3DFX_BANSHEE 0x0003
#define PCI_DEVICE_ID_3DFX_VOODOO3 0x0005
#define PCI_DEVICE_ID_3DFX_VOODOO5 0x0009
#define PCI_VENDOR_ID_AVM 0x1244
#define PCI_DEVICE_ID_AVM_B1 0x0700
#define PCI_DEVICE_ID_AVM_C4 0x0800
#define PCI_DEVICE_ID_AVM_A1 0x0a00
#define PCI_DEVICE_ID_AVM_A1_V2 0x0e00
#define PCI_DEVICE_ID_AVM_C2 0x1100
#define PCI_DEVICE_ID_AVM_T1 0x1200
#define PCI_VENDOR_ID_STALLION 0x124d
/* Allied Telesyn */
PCI: Fix typos and whitespace errors Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2019-05-30 21:05:58 +08:00
#define PCI_VENDOR_ID_AT 0x1259
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_SUBDEVICE_ID_AT_2700FX 0x2701
#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703
#define PCI_VENDOR_ID_ESS 0x125d
#define PCI_DEVICE_ID_ESS_ESS1968 0x1968
#define PCI_DEVICE_ID_ESS_ESS1978 0x1978
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_ESS_ALLEGRO_1 0x1988
#define PCI_DEVICE_ID_ESS_ALLEGRO 0x1989
#define PCI_DEVICE_ID_ESS_CANYON3D_2LE 0x1990
#define PCI_DEVICE_ID_ESS_CANYON3D_2 0x1992
#define PCI_DEVICE_ID_ESS_MAESTRO3 0x1998
#define PCI_DEVICE_ID_ESS_MAESTRO3_1 0x1999
#define PCI_DEVICE_ID_ESS_MAESTRO3_HW 0x199a
#define PCI_DEVICE_ID_ESS_MAESTRO3_2 0x199b
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_SATSAGEM 0x1267
#define PCI_DEVICE_ID_SATSAGEM_NICCY 0x1016
#define PCI_VENDOR_ID_ENSONIQ 0x1274
#define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880
#define PCI_DEVICE_ID_ENSONIQ_ES1370 0x5000
#define PCI_DEVICE_ID_ENSONIQ_ES1371 0x1371
#define PCI_VENDOR_ID_TRANSMETA 0x1279
#define PCI_DEVICE_ID_EFFICEON 0x0060
#define PCI_VENDOR_ID_ROCKWELL 0x127A
#define PCI_VENDOR_ID_ITE 0x1283
Resurrect IT8172 IDE controller driver Support for the IT8172 IDE controller was removed from the kernel sometime after 2.6.18. Support for the only boards that used the IT8172 was removed from the kernel after 2.6.18, as they had never compiled since 2.6.0. However, there are a couple of platforms that use this chip: the PMC-Sierra Xiao Hu thin-client computer, which is no longer in production, and the Linksys NSS4000 Network Attached Storage box, which is based on the Xiao Hu board. I am attempting to add support for the Xiao Hu to the kernel, and this IT8172 IDE controller is the first bit of code in this effort. This patch resurrects the IT8172 IDE controller code. I began with the 2.6.18 version of the it8172.c file, and have moved it forward so that it works with the latest version of the kernel. I have run this driver on a PMC-Sierra Xiao Hu board with the 2.6.28 kernel, and I have had no problems with it in my configuration. The attached patch applies cleanly against 2.6.28. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: alan@lxorguk.ukuu.org.uk [bart: s/HWIF(drive)/drive->hwif/] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-07 00:21:01 +08:00
#define PCI_DEVICE_ID_ITE_8172 0x8172
[PATCH] ide: it8212 backport for Bartlomiej IDE This lets you throw out the iteraid stuff that has ended up back in due to stupid goings on in the IDE world. Its the same heavily tested code shipped in Fedora/Red Hat products but without the other dependancies on the Bartlomiej IDE layer. Pre-requisite: the ide-disk patch I sent to handle pure LBA devices. Obviously you lose things like hot unplug with the Bartlomiej IDE layer at the moment but that won't matter to most users. The patch does the following - Add IT8211/12 to pci_ids.h - Add Makefile/Kconfig entry - Add it8212 driver No core IDE code is touched by this diff Embedded system testing and the ability to force raid mode off by David Howells Made possible by the ite reference code, documentation and also several clarifications and pieces of assistance provided by ITE themselves Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 06:24:30 +08:00
#define PCI_DEVICE_ID_ITE_8211 0x8211
#define PCI_DEVICE_ID_ITE_8212 0x8212
[PATCH] pata_it8213: Add new driver for the IT8213 card Add a driver for the IT8213 which is a single channel ICH-ish PATA controller. As it is very different to the IT8211/2 it gets its own driver. There is a legacy drivers/ide driver also available and I'll post that once I get time to test it all out (probably early January). If anyone else needs the drivers/ide driver and wants to do the merge for drivers/ide (Bart ??) then I'll forward it. [akpm@osdl.org: add PCI ID, constify needed_pio[]] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-08 00:59:14 +08:00
#define PCI_DEVICE_ID_ITE_8213 0x8213
[ARM] 4577/1: ITE 8152 PCI bridge support This patch provides driver for ITE 8152 PCI bridge. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-23 22:59:52 +08:00
#define PCI_DEVICE_ID_ITE_8152 0x8152
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_ITE_8872 0x8872
#define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886
/* formerly Platform Tech */
#define PCI_DEVICE_ID_ESS_ESS0100 0x0100
#define PCI_VENDOR_ID_ALTEON 0x12ae
#define PCI_SUBVENDOR_ID_CONNECT_TECH 0x12c4
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 0x0001
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232 0x0002
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232 0x0003
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485 0x0004
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4 0x0005
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485 0x0006
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2 0x0007
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485 0x0008
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6 0x0009
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1 0x000A
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1 0x000B
[SERIAL] Add support for more Connect Tech PCI serial boards I've also fixed the sort-ordering comments on this naming convention. Signed-off-by: Stuart MacDonald <stuartm@connecttech.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 01:00:42 +08:00
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ 0x000C
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_PTM 0x000D
#define PCI_SUBDEVICE_ID_CONNECT_TECH_NT960PCI 0x0100
#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2 0x0201
#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4 0x0202
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232 0x0300
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232 0x0301
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232 0x0302
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1 0x0310
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2 0x0311
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4 0x0312
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2 0x0320
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4 0x0321
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8 0x0322
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485 0x0330
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485 0x0331
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485 0x0332
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_NVIDIA_SGS 0x12d2
#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
serial: 8250_pci: Move Pericom IDs to pci_ids.h Move the IDs to pci_ids.h so it can be used by next patch. Link: https://lore.kernel.org/r/20200508065343.32751-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org
2020-05-08 14:53:40 +08:00
#define PCI_VENDOR_ID_PERICOM 0x12D8
#define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951
#define PCI_DEVICE_ID_PERICOM_PI7C9X7952 0x7952
#define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954
#define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_SUBVENDOR_ID_CHASE_PCIFAST 0x12E0
#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4 0x0031
#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8 0x0021
#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16 0x0011
#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC 0x0041
#define PCI_SUBVENDOR_ID_CHASE_PCIRAS 0x124D
#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4 0xF001
#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8 0xF010
#define PCI_VENDOR_ID_AUREAL 0x12eb
#define PCI_DEVICE_ID_AUREAL_VORTEX_1 0x0001
#define PCI_DEVICE_ID_AUREAL_VORTEX_2 0x0002
#define PCI_DEVICE_ID_AUREAL_ADVANTAGE 0x0003
#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
#define PCI_DEVICE_ID_LML_33R10 0x8a02
[PATCH] serial: support for new board Add support for the CPCI-ASIO4 quad port CompactPCI UART board from electronic system design gmbh. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 17:46:05 +08:00
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci_ids.h: add common pci vendor ids from comedi subsystem There are a number of pci vendor ids that are used in multiple drivers in the comedi subsystem. Move these ids to pci_ids.h. This also fixes some build warnings reported by the kbuild test robot about PCI_VENDOR_ID_AMPLICON being undeclared. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-01 05:42:16 +08:00
#define PCI_VENDOR_ID_CB 0x1307 /* Measurement Computing */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_SIIG 0x131f
[PATCH] Serial: Add support for SIIG Quartet serial card Add support for SIIG Quartet Serial card. This card has Oxford Semiconducor 16954 quad UART which is clocked by 10x faster (18.432 MHz) quartz. Signed-off-by: Andrey Panin <pazke@donpac.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-18 18:38:09 +08:00
#define PCI_SUBVENDOR_ID_SIIG 0x131f
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
#define PCI_DEVICE_ID_SIIG_1S_10x_650 0x1001
#define PCI_DEVICE_ID_SIIG_1S_10x_850 0x1002
#define PCI_DEVICE_ID_SIIG_1S1P_10x_550 0x1010
#define PCI_DEVICE_ID_SIIG_1S1P_10x_650 0x1011
#define PCI_DEVICE_ID_SIIG_1S1P_10x_850 0x1012
#define PCI_DEVICE_ID_SIIG_1P_10x 0x1020
#define PCI_DEVICE_ID_SIIG_2P_10x 0x1021
#define PCI_DEVICE_ID_SIIG_2S_10x_550 0x1030
#define PCI_DEVICE_ID_SIIG_2S_10x_650 0x1031
#define PCI_DEVICE_ID_SIIG_2S_10x_850 0x1032
#define PCI_DEVICE_ID_SIIG_2S1P_10x_550 0x1034
#define PCI_DEVICE_ID_SIIG_2S1P_10x_650 0x1035
#define PCI_DEVICE_ID_SIIG_2S1P_10x_850 0x1036
#define PCI_DEVICE_ID_SIIG_4S_10x_550 0x1050
#define PCI_DEVICE_ID_SIIG_4S_10x_650 0x1051
#define PCI_DEVICE_ID_SIIG_4S_10x_850 0x1052
#define PCI_DEVICE_ID_SIIG_1S_20x_550 0x2000
#define PCI_DEVICE_ID_SIIG_1S_20x_650 0x2001
#define PCI_DEVICE_ID_SIIG_1S_20x_850 0x2002
#define PCI_DEVICE_ID_SIIG_1P_20x 0x2020
#define PCI_DEVICE_ID_SIIG_2P_20x 0x2021
#define PCI_DEVICE_ID_SIIG_2S_20x_550 0x2030
#define PCI_DEVICE_ID_SIIG_2S_20x_650 0x2031
#define PCI_DEVICE_ID_SIIG_2S_20x_850 0x2032
#define PCI_DEVICE_ID_SIIG_2P1S_20x_550 0x2040
#define PCI_DEVICE_ID_SIIG_2P1S_20x_650 0x2041
#define PCI_DEVICE_ID_SIIG_2P1S_20x_850 0x2042
#define PCI_DEVICE_ID_SIIG_1S1P_20x_550 0x2010
#define PCI_DEVICE_ID_SIIG_1S1P_20x_650 0x2011
#define PCI_DEVICE_ID_SIIG_1S1P_20x_850 0x2012
#define PCI_DEVICE_ID_SIIG_4S_20x_550 0x2050
#define PCI_DEVICE_ID_SIIG_4S_20x_650 0x2051
#define PCI_DEVICE_ID_SIIG_4S_20x_850 0x2052
#define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060
#define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061
#define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062
[SERIAL] SIIG 8-port serial boards support This patch adds support for SIIG 8-port boards. These boards have 4 ports in separate bars and another 4 ports in the single bar. Because of this strange port arrangement these cards need special setup function. Fortunately no other SIIG cards have more than 4 port, so this setup function could be used for them too. Signed-off-by: Andrey Panin <pazke@donpac.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-03 04:15:09 +08:00
#define PCI_DEVICE_ID_SIIG_8S_20x_550 0x2080
#define PCI_DEVICE_ID_SIIG_8S_20x_650 0x2081
#define PCI_DEVICE_ID_SIIG_8S_20x_850 0x2082
[PATCH] Serial: Add support for SIIG Quartet serial card Add support for SIIG Quartet Serial card. This card has Oxford Semiconducor 16954 quad UART which is clocked by 10x faster (18.432 MHz) quartz. Signed-off-by: Andrey Panin <pazke@donpac.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-18 18:38:09 +08:00
#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] PCI: fix edac drivers for radisys 82600 borkage I told you that the pci_ids.h cleanup was a bad idea ;) Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-16 13:02:19 +08:00
#define PCI_VENDOR_ID_RADISYS 0x1331
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
drivers/block/umem: move private include away from include/linux Move include/linux/umem.h to drivers/block, as umem.c is the only user, and its not an exported header. Move the PCI_{VENDOR,DEVICE}_ID_* constants to include/linux/pci_ids.h. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-27 18:25:06 +08:00
#define PCI_VENDOR_ID_MICRO_MEMORY 0x1332
#define PCI_DEVICE_ID_MICRO_MEMORY_5415CN 0x5415
#define PCI_DEVICE_ID_MICRO_MEMORY_5425CN 0x5425
#define PCI_DEVICE_ID_MICRO_MEMORY_6155 0x6155
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_DOMEX 0x134a
#define PCI_DEVICE_ID_DOMEX_DMX3191D 0x0001
[SERIAL] Support for Intashield 2 port PCI serial card Here is a patch that adds support for the Instashield IS-200 2 port PCI serial card. Signed-off-by: Peter Horton <pdh@colonel-panic.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-26 16:07:36 +08:00
#define PCI_VENDOR_ID_INTASHIELD 0x135a
#define PCI_DEVICE_ID_INTASHIELD_IS200 0x0d80
serial: support for InstaShield IS-400 four port RS-232 PCI card Add support for the InstaShield IS-400 four port RS-232 PCI card. Signed-off-by: Ignacio García Pérez <iggarpe@t2i.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 04:04:28 +08:00
#define PCI_DEVICE_ID_INTASHIELD_IS400 0x0dc0
[SERIAL] Support for Intashield 2 port PCI serial card Here is a patch that adds support for the Instashield IS-200 2 port PCI serial card. Signed-off-by: Peter Horton <pdh@colonel-panic.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-26 16:07:36 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_QUATECH 0x135C
#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010
#define PCI_DEVICE_ID_QUATECH_DSC100 0x0020
serial: quatech: add the other serial identifiers and preliminary control code Jonathan Woithe posted an out of tree enabler/control module for these cards. Lift the relevant identifiers and put them in the 8250_pci driver along with code used to control custom registers on these cards. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29 06:33:00 +08:00
#define PCI_DEVICE_ID_QUATECH_DSC200 0x0030
#define PCI_DEVICE_ID_QUATECH_QSC200 0x0040
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050
#define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060
serial: quatech: add the other serial identifiers and preliminary control code Jonathan Woithe posted an out of tree enabler/control module for these cards. Lift the relevant identifiers and put them in the 8250_pci driver along with code used to control custom registers on these cards. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29 06:33:00 +08:00
#define PCI_DEVICE_ID_QUATECH_QSCP100 0x0120
#define PCI_DEVICE_ID_QUATECH_DSCP100 0x0130
#define PCI_DEVICE_ID_QUATECH_QSCP200 0x0140
#define PCI_DEVICE_ID_QUATECH_DSCP200 0x0150
#define PCI_DEVICE_ID_QUATECH_QSCLP100 0x0170
#define PCI_DEVICE_ID_QUATECH_DSCLP100 0x0180
#define PCI_DEVICE_ID_QUATECH_DSC100E 0x0181
#define PCI_DEVICE_ID_QUATECH_SSCLP100 0x0190
#define PCI_DEVICE_ID_QUATECH_QSCLP200 0x01A0
#define PCI_DEVICE_ID_QUATECH_DSCLP200 0x01B0
#define PCI_DEVICE_ID_QUATECH_DSC200E 0x01B1
#define PCI_DEVICE_ID_QUATECH_SSCLP200 0x01C0
#define PCI_DEVICE_ID_QUATECH_ESCLP100 0x01E0
parport: add support for the Quatech SPPXP-100 Parallel port PCI ExpressCard Added pci device id for the Quatech SPPXP-100 ExpressCard - 0x278 - to include/linux/pci_id.h Modified drivers/parport/parport_pc.c to support the Quatech SPPXP-100 Parallel port PCI ExpressCard [akpm@linux-foundation.org: build fix] Signed-off-by: Luís P Mendes <luis.p.mendes@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 17:37:43 +08:00
#define PCI_DEVICE_ID_QUATECH_SPPXP_100 0x0278
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_SEALEVEL 0x135e
#define PCI_DEVICE_ID_SEALEVEL_U530 0x7101
#define PCI_DEVICE_ID_SEALEVEL_UCOMM2 0x7201
#define PCI_DEVICE_ID_SEALEVEL_UCOMM422 0x7402
#define PCI_DEVICE_ID_SEALEVEL_UCOMM232 0x7202
#define PCI_DEVICE_ID_SEALEVEL_COMM4 0x7401
#define PCI_DEVICE_ID_SEALEVEL_COMM8 0x7801
serial_8250: support for Sealevel Systems Model 7803 COMM+8 Add support for Sealevel Systems Model 7803 COMM+8 Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 21:50:43 +08:00
#define PCI_DEVICE_ID_SEALEVEL_7803 0x7803
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_SEALEVEL_UCOMM8 0x7804
#define PCI_VENDOR_ID_HYPERCOPE 0x1365
#define PCI_DEVICE_ID_HYPERCOPE_PLX 0x9050
#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO 0x0104
#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO 0x0106
#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO 0x0107
#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2 0x0108
ALSA: lx6464es - driver for the digigram lx6464es interface prototype of a driver for the digigram lx6464es 64 channel ethersound interface. Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-24 19:24:35 +08:00
#define PCI_VENDOR_ID_DIGIGRAM 0x1369
#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM 0xc001
#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM 0xc002
ALSA: lx6464es - add support for LX6464ESe pci express variant The pci express variant of the digigram lx6464es card has a different device ID, but works without changes to the driver. Thanks to Nikolas Slottke for reporting and testing. Signed-off-by: Tim Blechmann <tim@klingt.org> Link: https://lore.kernel.org/r/20190906082119.40971-1-tim@klingt.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-09-06 16:21:19 +08:00
#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ESE_SERIAL_SUBSYSTEM 0xc021
#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ESE_CAE_SERIAL_SUBSYSTEM 0xc022
ALSA: lx6464es - driver for the digigram lx6464es interface prototype of a driver for the digigram lx6464es 64 channel ethersound interface. Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-24 19:24:35 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_KAWASAKI 0x136b
#define PCI_DEVICE_ID_MCHIP_KL5A72002 0xff01
#define PCI_VENDOR_ID_CNET 0x1371
#define PCI_DEVICE_ID_CNET_GIGACARD 0x434e
#define PCI_VENDOR_ID_LMC 0x1376
#define PCI_DEVICE_ID_LMC_HSSI 0x0003
#define PCI_DEVICE_ID_LMC_DS3 0x0004
#define PCI_DEVICE_ID_LMC_SSI 0x0005
#define PCI_DEVICE_ID_LMC_T1 0x0006
#define PCI_VENDOR_ID_NETGEAR 0x1385
#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a
#define PCI_VENDOR_ID_APPLICOM 0x1389
#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
#define PCI_VENDOR_ID_MOXA 0x1393
#define PCI_DEVICE_ID_MOXA_RC7000 0x0001
#define PCI_DEVICE_ID_MOXA_CP102 0x1020
#define PCI_DEVICE_ID_MOXA_CP102UL 0x1021
#define PCI_DEVICE_ID_MOXA_CP102U 0x1022
#define PCI_DEVICE_ID_MOXA_C104 0x1040
#define PCI_DEVICE_ID_MOXA_CP104U 0x1041
#define PCI_DEVICE_ID_MOXA_CP104JU 0x1042
[PATCH] Char: mxser_new, upgrade to 1.9.1 Change cloned experimental driver according to original 1.9.1 moxa driver. Some int->ulong conversions, outb ~UART_IER_THRI constant. Remove commented stuff. I also added printk line with info, if somebody wants to test it, he may contact me as I can potentially debug the driver with him or just to confirm it works properly. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 18:38:13 +08:00
#define PCI_DEVICE_ID_MOXA_CP104EL 0x1043
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_MOXA_CT114 0x1140
#define PCI_DEVICE_ID_MOXA_CP114 0x1141
#define PCI_DEVICE_ID_MOXA_CP118U 0x1180
[PATCH] Char: mxser_new, upgrade to 1.9.1 Change cloned experimental driver according to original 1.9.1 moxa driver. Some int->ulong conversions, outb ~UART_IER_THRI constant. Remove commented stuff. I also added printk line with info, if somebody wants to test it, he may contact me as I can potentially debug the driver with him or just to confirm it works properly. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 18:38:13 +08:00
#define PCI_DEVICE_ID_MOXA_CP118EL 0x1181
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_MOXA_CP132 0x1320
#define PCI_DEVICE_ID_MOXA_CP132U 0x1321
#define PCI_DEVICE_ID_MOXA_CP134U 0x1340
#define PCI_DEVICE_ID_MOXA_C168 0x1680
#define PCI_DEVICE_ID_MOXA_CP168U 0x1681
[PATCH] Char: mxser_new, upgrade to 1.9.1 Change cloned experimental driver according to original 1.9.1 moxa driver. Some int->ulong conversions, outb ~UART_IER_THRI constant. Remove commented stuff. I also added printk line with info, if somebody wants to test it, he may contact me as I can potentially debug the driver with him or just to confirm it works properly. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 18:38:13 +08:00
#define PCI_DEVICE_ID_MOXA_CP168EL 0x1682
[PATCH] Char: moxa, devids cleanup Move them to pci_ids.h Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 17:45:29 +08:00
#define PCI_DEVICE_ID_MOXA_CP204J 0x2040
#define PCI_DEVICE_ID_MOXA_C218 0x2180
#define PCI_DEVICE_ID_MOXA_C320 0x3200
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_CCD 0x1397
Add mISDN HFC multiport driver Enable support for cards with Cologne Chip AG's HFC multiport chip. Signed-off-by: Karsten Keil <kkeil@suse.de>
2008-07-27 08:00:43 +08:00
#define PCI_DEVICE_ID_CCD_HFC4S 0x08B4
#define PCI_SUBDEVICE_ID_CCD_PMX2S 0x1234
#define PCI_DEVICE_ID_CCD_HFC8S 0x16B8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_CCD_2BD0 0x2bd0
Add mISDN HFC multiport driver Enable support for cards with Cologne Chip AG's HFC multiport chip. Signed-off-by: Karsten Keil <kkeil@suse.de>
2008-07-27 08:00:43 +08:00
#define PCI_DEVICE_ID_CCD_HFCE1 0x30B1
#define PCI_SUBDEVICE_ID_CCD_SPD4S 0x3136
#define PCI_SUBDEVICE_ID_CCD_SPDE1 0x3137
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_CCD_B000 0xb000
#define PCI_DEVICE_ID_CCD_B006 0xb006
#define PCI_DEVICE_ID_CCD_B007 0xb007
#define PCI_DEVICE_ID_CCD_B008 0xb008
#define PCI_DEVICE_ID_CCD_B009 0xb009
#define PCI_DEVICE_ID_CCD_B00A 0xb00a
#define PCI_DEVICE_ID_CCD_B00B 0xb00b
#define PCI_DEVICE_ID_CCD_B00C 0xb00c
#define PCI_DEVICE_ID_CCD_B100 0xb100
Add mISDN HFC multiport driver Enable support for cards with Cologne Chip AG's HFC multiport chip. Signed-off-by: Karsten Keil <kkeil@suse.de>
2008-07-27 08:00:43 +08:00
#define PCI_SUBDEVICE_ID_CCD_IOB4ST 0xB520
#define PCI_SUBDEVICE_ID_CCD_IOB8STR 0xB521
#define PCI_SUBDEVICE_ID_CCD_IOB8ST 0xB522
#define PCI_SUBDEVICE_ID_CCD_IOB1E1 0xB523
#define PCI_SUBDEVICE_ID_CCD_SWYX4S 0xB540
#define PCI_SUBDEVICE_ID_CCD_JH4S20 0xB550
#define PCI_SUBDEVICE_ID_CCD_IOB8ST_1 0xB552
mISDN: Added PCI ID for new Junghanns.net Single E1 cards. The new ID is validated by Cologne Chip. LEDs control is also supported. Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25 15:56:56 +08:00
#define PCI_SUBDEVICE_ID_CCD_JHSE1 0xB553
mISDN: Add PCI ID for Junghanns 8S card new id for HFC-8S Signed-off-by: Andreas Eversberg <andreas@eversberg.eu> Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22 19:04:55 +08:00
#define PCI_SUBDEVICE_ID_CCD_JH8S 0xB55B
Add mISDN HFC multiport driver Enable support for cards with Cologne Chip AG's HFC multiport chip. Signed-off-by: Karsten Keil <kkeil@suse.de>
2008-07-27 08:00:43 +08:00
#define PCI_SUBDEVICE_ID_CCD_BN4S 0xB560
#define PCI_SUBDEVICE_ID_CCD_BN8S 0xB562
#define PCI_SUBDEVICE_ID_CCD_BNE1 0xB563
#define PCI_SUBDEVICE_ID_CCD_BNE1D 0xB564
#define PCI_SUBDEVICE_ID_CCD_BNE1DP 0xB565
#define PCI_SUBDEVICE_ID_CCD_BN2S 0xB566
#define PCI_SUBDEVICE_ID_CCD_BN1SM 0xB567
#define PCI_SUBDEVICE_ID_CCD_BN4SM 0xB568
#define PCI_SUBDEVICE_ID_CCD_BN2SM 0xB569
#define PCI_SUBDEVICE_ID_CCD_BNE1M 0xB56A
#define PCI_SUBDEVICE_ID_CCD_BN8SP 0xB56B
#define PCI_SUBDEVICE_ID_CCD_HFC4S 0xB620
#define PCI_SUBDEVICE_ID_CCD_HFC8S 0xB622
[PATCH] i4l: add new PCI IDs for HFC-S PCI Add new PCI IDs for HFC-S PCI based ISDN TA 'Primux II S0' and 'Primux II S0' from Gerdes AG Signed-off-by: Martin Bachem <info@colognechip.com> Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-07 07:42:37 +08:00
#define PCI_DEVICE_ID_CCD_B700 0xb700
#define PCI_DEVICE_ID_CCD_B701 0xb701
Add mISDN HFC multiport driver Enable support for cards with Cologne Chip AG's HFC multiport chip. Signed-off-by: Karsten Keil <kkeil@suse.de>
2008-07-27 08:00:43 +08:00
#define PCI_SUBDEVICE_ID_CCD_HFCE1 0xC523
#define PCI_SUBDEVICE_ID_CCD_OV2S 0xE884
#define PCI_SUBDEVICE_ID_CCD_OV4S 0xE888
#define PCI_SUBDEVICE_ID_CCD_OV8S 0xE998
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_EXAR 0x13a8
#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152
#define PCI_DEVICE_ID_EXAR_XR17C154 0x0154
#define PCI_DEVICE_ID_EXAR_XR17C158 0x0158
Serial: Add support for new devices: Exar's XR17V35x family of multi-port PCIe UARTs Add support for new devices: Exar's XR17V35x family of multi-port PCIe UARTs. Signed-off-by: Matt Schulte <matts@commtech-fastcom.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-19 23:12:04 +08:00
#define PCI_DEVICE_ID_EXAR_XR17V352 0x0352
#define PCI_DEVICE_ID_EXAR_XR17V354 0x0354
#define PCI_DEVICE_ID_EXAR_XR17V358 0x0358
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_MICROGATE 0x13c0
#define PCI_VENDOR_ID_3WARE 0x13C1
#define PCI_DEVICE_ID_3WARE_1000 0x1000
#define PCI_DEVICE_ID_3WARE_7000 0x1001
#define PCI_DEVICE_ID_3WARE_9000 0x1002
#define PCI_VENDOR_ID_IOMEGA 0x13ca
#define PCI_DEVICE_ID_IOMEGA_BUZ 0x4231
#define PCI_VENDOR_ID_ABOCOM 0x13D1
#define PCI_DEVICE_ID_ABOCOM_2BD1 0x2BD1
[IPG]: add IP1000A driver to kernel tree Signed-off-by: Jesse Huang <jesse@icplus.com.tw> Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-18 08:13:55 +08:00
#define PCI_VENDOR_ID_SUNDANCE 0x13f0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_CMEDIA 0x13f6
#define PCI_DEVICE_ID_CMEDIA_CM8338A 0x0100
#define PCI_DEVICE_ID_CMEDIA_CM8338B 0x0101
#define PCI_DEVICE_ID_CMEDIA_CM8738 0x0111
#define PCI_DEVICE_ID_CMEDIA_CM8738B 0x0112
pci_ids.h: add common pci vendor ids from comedi subsystem There are a number of pci vendor ids that are used in multiple drivers in the comedi subsystem. Move these ids to pci_ids.h. This also fixes some build warnings reported by the kbuild test robot about PCI_VENDOR_ID_AMPLICON being undeclared. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-01 05:42:16 +08:00
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
#define PCI_VENDOR_ID_MEILHAUS 0x1402
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_LAVA 0x1407
#define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */
#define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */
#define PCI_DEVICE_ID_LAVA_QUATRO_B 0x0102 /* 2x 16550, half of 4 port */
serial: add support for the Lava Quattro PCI quad-port 16550A card This seems to be a different model (with a different PCI ID) than the "Quatro" card that is also in the list. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-12 06:26:42 +08:00
#define PCI_DEVICE_ID_LAVA_QUATTRO_A 0x0120 /* 2x 16550A, half of 4 port */
#define PCI_DEVICE_ID_LAVA_QUATTRO_B 0x0121 /* 2x 16550A, half of 4 port */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_LAVA_OCTO_A 0x0180 /* 4x 16550A, half of 8 port */
#define PCI_DEVICE_ID_LAVA_OCTO_B 0x0181 /* 4x 16550A, half of 8 port */
#define PCI_DEVICE_ID_LAVA_PORT_PLUS 0x0200 /* 2x 16650 */
#define PCI_DEVICE_ID_LAVA_QUAD_A 0x0201 /* 2x 16650, half of 4 port */
#define PCI_DEVICE_ID_LAVA_QUAD_B 0x0202 /* 2x 16650, half of 4 port */
#define PCI_DEVICE_ID_LAVA_SSERIAL 0x0500 /* 1x 16550 */
#define PCI_DEVICE_ID_LAVA_PORT_650 0x0600 /* 1x 16650 */
#define PCI_DEVICE_ID_LAVA_PARALLEL 0x8000
#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A 0x8002 /* The Lava Dual Parallel is */
#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B 0x8003 /* two PCI devices on a card */
#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR 0x8800
#define PCI_VENDOR_ID_TIMEDIA 0x1409
#define PCI_DEVICE_ID_TIMEDIA_1889 0x7168
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_VENDOR_ID_ICE 0x1412
#define PCI_DEVICE_ID_ICE_1712 0x1712
#define PCI_DEVICE_ID_VT1724 0x1724
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_OXSEMI 0x1415
#define PCI_DEVICE_ID_OXSEMI_12PCI840 0x8403
8250: Oxford Semiconductor Devices Add support for the OxSemi 'Tornado' devices. Reformatted and reworked a bit by Alan Cox Signed-off-by: Lee Howard <lee.howard@mainpine.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-21 20:48:58 +08:00
#define PCI_DEVICE_ID_OXSEMI_PCIe840 0xC000
#define PCI_DEVICE_ID_OXSEMI_PCIe840_G 0xC004
#define PCI_DEVICE_ID_OXSEMI_PCIe952_0 0xC100
#define PCI_DEVICE_ID_OXSEMI_PCIe952_0_G 0xC104
#define PCI_DEVICE_ID_OXSEMI_PCIe952_1 0xC110
#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_G 0xC114
#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U 0xC118
#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU 0xC11C
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_OXSEMI_16PCI954 0x9501
8250_pci: add the OXCB950 chip to the 8250 PCI driver. This adds support for the following serial controller chip: Oxford Semiconductor OXCB950 for PCI Cardbus interface http://www.transdimension.com/products/serial/OXCB950.html on this card: ExSys EX-1370 1 port high-speed serial card for ExpressCard/34 slot Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 19:41:57 +08:00
#define PCI_DEVICE_ID_OXSEMI_C950 0x950B
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_OXSEMI_16PCI95N 0x9511
#define PCI_DEVICE_ID_OXSEMI_16PCI954PP 0x9513
#define PCI_DEVICE_ID_OXSEMI_16PCI952 0x9521
[PATCH] parport_pc: Add support for OX16PCI952 parallel port Add support for the parallel port (implemented as separate PCI function) on the Oxford Semiconductor OX16PCI952. Signed-off-by: Ryan Underwood <nemesis@icequake.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 12:36:38 +08:00
#define PCI_DEVICE_ID_OXSEMI_16PCI952PP 0x9523
8250_pci: add the OXCB950 chip to the 8250 PCI driver. This adds support for the following serial controller chip: Oxford Semiconductor OXCB950 for PCI Cardbus interface http://www.transdimension.com/products/serial/OXCB950.html on this card: ExSys EX-1370 1 port high-speed serial card for ExpressCard/34 slot Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 19:41:57 +08:00
#define PCI_SUBDEVICE_ID_OXSEMI_C950 0x0001
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PCI: pci_ids, reorder some entries pci_ids, reorder some entries Some lines are not vendor sorted, reorder it to comply with the rest of document. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-18 16:55:30 +08:00
#define PCI_VENDOR_ID_CHELSIO 0x1425
pci_ids.h: add common pci vendor ids from comedi subsystem There are a number of pci vendor ids that are used in multiple drivers in the comedi subsystem. Move these ids to pci_ids.h. This also fixes some build warnings reported by the kbuild test robot about PCI_VENDOR_ID_AMPLICON being undeclared. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-01 05:42:16 +08:00
#define PCI_VENDOR_ID_ADLINK 0x144a
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_SAMSUNG 0x144d
r8169: phy init for the 8169scd Synced with Realtek's 6.011.00 r8169 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-11 03:44:19 +08:00
#define PCI_VENDOR_ID_GIGABYTE 0x1458
ath5k: support LED's on emachines E510 notebook Add vendor ID for AMBIT and use it to set the ath5k LED gpio. base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-26 06:54:25 +08:00
#define PCI_VENDOR_ID_AMBIT 0x1468
[PATCH] Add Myri-10G Ethernet driver Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew J. Gallatin <gallatin@myri.com> drivers/net/Kconfig | 17 drivers/net/Makefile | 1 drivers/net/myri10ge/Makefile | 5 drivers/net/myri10ge/myri10ge.c | 2851 +++++++++++++++ drivers/net/myri10ge/myri10ge_mcp.h | 205 + drivers/net/myri10ge/myri10ge_mcp_gen_header.h | 58 include/linux/pci_ids.h | 1 7 files changed, 3138 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-23 18:10:15 +08:00
#define PCI_VENDOR_ID_MYRICOM 0x14c1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PCI: mediatek: Set up vendor ID and class type for MT7622 MT7622's hardware default value of vendor ID and class type is not correct, fix that by setup the correct values before linkup with Endpoint. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2018-05-04 13:47:32 +08:00
#define PCI_VENDOR_ID_MEDIATEK 0x14c3
PCI: mediatek: Add controller support for MT7629 MT7629 is an ARM platform SoC which has the same PCIe IP as MT7622. The HW default value of its PCI host controller Device ID is invalid, fix it to match the hardware implementation. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> [lorenzo.pieralisi@arm.com: commit log/minor spelling update] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2019-06-28 15:34:25 +08:00
#define PCI_DEVICE_ID_MEDIATEK_7629 0x7629
PCI: mediatek: Set up vendor ID and class type for MT7622 MT7622's hardware default value of vendor ID and class type is not correct, fix that by setup the correct values before linkup with Endpoint. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2018-05-04 13:47:32 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_TITAN 0x14D2
#define PCI_DEVICE_ID_TITAN_010L 0x8001
#define PCI_DEVICE_ID_TITAN_100L 0x8010
#define PCI_DEVICE_ID_TITAN_110L 0x8011
#define PCI_DEVICE_ID_TITAN_200L 0x8020
#define PCI_DEVICE_ID_TITAN_210L 0x8021
#define PCI_DEVICE_ID_TITAN_400L 0x8040
#define PCI_DEVICE_ID_TITAN_800L 0x8080
#define PCI_DEVICE_ID_TITAN_100 0xA001
#define PCI_DEVICE_ID_TITAN_200 0xA005
#define PCI_DEVICE_ID_TITAN_400 0xA003
#define PCI_DEVICE_ID_TITAN_800B 0xA004
#define PCI_VENDOR_ID_PANACOM 0x14d4
#define PCI_DEVICE_ID_PANACOM_QUADMODEM 0x0400
#define PCI_DEVICE_ID_PANACOM_DUALMODEM 0x0402
[MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systems It was obesrved that at least one older PCI card predating the requirement for the TRDY signal to respond within 16 clock ticks actually does not meet this rule nor even the power-on defaults of the PCI bridges found in development systems built around the Broadcom SiByte SOCs. Here is a patch that bumps up the timeout to the highest finite value supported by these chips, which is 255 clock ticks. The bridges affected are the SiByte SOC itself and the SP1011. This change does not effectively affect systems only having PCI option cards installed that meet the TRDY requirement of the current PCI spec. The rule was introduced with PCI 2.1, so any older card may make the system affected. If this is the case, performance of the system will suffer in return for the card working at all. If this is a concern, then the solution is not to use such cards. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2006-10-02 19:55:09 +08:00
#define PCI_VENDOR_ID_SIPACKETS 0x14d9
#define PCI_DEVICE_ID_SP1011 0x0010
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_AFAVLAB 0x14db
#define PCI_DEVICE_ID_AFAVLAB_P028 0x2180
#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
[SERIAL] 8250_pci: add new PCI serial card support This patch adds new PCI serial card support. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-09 05:46:24 +08:00
#define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci_ids.h: add common pci vendor ids from comedi subsystem There are a number of pci vendor ids that are used in multiple drivers in the comedi subsystem. Move these ids to pci_ids.h. This also fixes some build warnings reported by the kbuild test robot about PCI_VENDOR_ID_AMPLICON being undeclared. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-01 05:42:16 +08:00
#define PCI_VENDOR_ID_AMPLICON 0x14dc
ssb: b43-pci-bridge: Add new vendor for BCM4318 Add new vendor for Broadcom 4318. Signed-off-by: Daniel Klaffenbach <danielklaffenbach@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-20 11:25:21 +08:00
#define PCI_VENDOR_ID_BCM_GVC 0x14a4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_BROADCOM 0x14e4
[TG3]: add bcm5752 entry to pci_ids.h Add proper entry for bcm5752 PCI ID to pci_ids.h, and use it in tg3. I did this separately in case patches like this (i.e. new PCI IDs) need to come from more "official" sources. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-22 07:58:56 +08:00
#define PCI_DEVICE_ID_TIGON3_5752 0x1600
[TG3]: Add 5752M device ID. Add 0x1601 as 5752M, it's a 5752 but for mobile PCs. Stolen from Broadcom bcm5700-8.1.55 driver. Someone forgot to add it to tg3 ;-) Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-24 03:54:51 +08:00
#define PCI_DEVICE_ID_TIGON3_5752M 0x1601
[BNX2]: Add 5709 PCI ID. Add PCI ID and detection for 5709 copper and SerDes chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-20 06:15:05 +08:00
#define PCI_DEVICE_ID_NX2_5709 0x1639
[BNX2]: Add support for 5709 Serdes. Add PCI ID and code to support the 5709 Serdes PHY. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-04 04:23:41 +08:00
#define PCI_DEVICE_ID_NX2_5709S 0x163a
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5700 0x1644
#define PCI_DEVICE_ID_TIGON3_5701 0x1645
#define PCI_DEVICE_ID_TIGON3_5702 0x1646
#define PCI_DEVICE_ID_TIGON3_5703 0x1647
#define PCI_DEVICE_ID_TIGON3_5704 0x1648
#define PCI_DEVICE_ID_TIGON3_5704S_2 0x1649
[BNX2]: New Broadcom gigabit network driver. A new driver bnx2 for Broadcom bcm5706 is available. The patch also includes new 1000BASE-X advertisement bit definitions in mii.h Thanks to David Miller and Jeff Garzik for reviewing and their valuable feedback. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-27 04:03:09 +08:00
#define PCI_DEVICE_ID_NX2_5706 0x164a
[PATCH] bnx2: add 5708 support Add 5708 copper and serdes basic support, including 2.5 Gbps support on 5708 serdes. SPEED_2500 is also added to ethtool.h Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05 00:45:49 +08:00
#define PCI_DEVICE_ID_NX2_5708 0x164c
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5702FE 0x164d
add bnx2x driver for BCM57710 Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-16 02:09:02 +08:00
#define PCI_DEVICE_ID_NX2_57710 0x164e
bnx2x: Add support for BCM57711 HW Supporting the 57711 and 57711E - refers to in the code as E1H. The 57710 is referred to as E1. To support the new members in the family, the bnx2x structure was divided to 3 parts: common, port and function. These changes caused some rearrangement in the bnx2x.h file. A set of accessories macros were added to make access to the bnx2x structure more readable Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-24 11:33:01 +08:00
#define PCI_DEVICE_ID_NX2_57711 0x164f
#define PCI_DEVICE_ID_NX2_57711E 0x1650
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5705 0x1653
#define PCI_DEVICE_ID_TIGON3_5705_2 0x1654
tg3: Recode PCI MRRS adjustment as a PCI quirk This patch recodes the MRRS cap for 5719 A0 devices as a PCI quirk. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-27 17:44:48 +08:00
#define PCI_DEVICE_ID_TIGON3_5719 0x1657
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5721 0x1659
[TG3]: Add 5722 and 5756 support. Add IDs to support 5722 and 5756. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 07:03:07 +08:00
#define PCI_DEVICE_ID_TIGON3_5722 0x165a
[TG3]: Add 5723 support This patch adds support for upcoming 5723 devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-22 07:12:02 +08:00
#define PCI_DEVICE_ID_TIGON3_5723 0x165b
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5705M 0x165d
#define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e
[SCSI] bnx2i: Added support for the 57712(E) devices Moved all PCI_DEVICE_ID_NX2_57712(E) definitions to pci_ids.h Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Acked-by: Michael Chan <mchan@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-17 05:04:28 +08:00
#define PCI_DEVICE_ID_NX2_57712 0x1662
#define PCI_DEVICE_ID_NX2_57712E 0x1663
[SCSI] bnx2fc: Include chip number in the symbolic name [jejb: move PCI_DEVICE_ID definitions to include/pci_ids.h] Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-03-09 05:28:51 +08:00
#define PCI_DEVICE_ID_NX2_57712_MF 0x1663
[PATCH] tg3: add 5714/5715 support Add complete support for 5714/5715. These chips are very similar to 5780 so the changes are very trivial. A TG3_FLG2_5780_CLASS flag is added to identify these chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-27 06:46:52 +08:00
#define PCI_DEVICE_ID_TIGON3_5714 0x1668
[TG3]: Add support for 5714S and 5715S Add support for 5714S and 5715S. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 09:47:20 +08:00
#define PCI_DEVICE_ID_TIGON3_5714S 0x1669
[TG3]: add 5780 basic support Add 5780 PCI IDs, chip IDs, and other basic support. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-26 03:29:19 +08:00
#define PCI_DEVICE_ID_TIGON3_5780 0x166a
#define PCI_DEVICE_ID_TIGON3_5780S 0x166b
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5705F 0x166e
[SCSI] bnx2fc: Include chip number in the symbolic name [jejb: move PCI_DEVICE_ID definitions to include/pci_ids.h] Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-03-09 05:28:51 +08:00
#define PCI_DEVICE_ID_NX2_57712_VF 0x166f
[TG3]: Add 5787 and 5754 basic support Add basic support for 2 new chips 5787 and 5754. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 14:27:35 +08:00
#define PCI_DEVICE_ID_TIGON3_5754M 0x1672
[TG3]: Add 5755 support Add support for new chip 5755 which is very similar to 5787. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-23 17:28:06 +08:00
#define PCI_DEVICE_ID_TIGON3_5755M 0x1673
[TG3]: Add 5722 and 5756 support. Add IDs to support 5722 and 5756. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 07:03:07 +08:00
#define PCI_DEVICE_ID_TIGON3_5756 0x1674
tg3: add support for Ethernet core in bcm4785 The BCM4785 or sometimes named BMC4705 is a Broadcom SoC which a Gigabit 5750 Ethernet core. The core is connected via PCI with the rest of the SoC, but it uses some extension. This core does not use a firmware or an eeprom. Some devices only have a switch which supports 100MBit/s, this currently does not work with this driver. This patch was original written by Michael Buesch <m@bues.ch> and is in OpenWrt for some years now. This was tested on a Linksys WRT610N V1 and older versions of this patch were tested by other people on different devices. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-07 13:37:39 +08:00
#define PCI_DEVICE_ID_TIGON3_5750 0x1676
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5751 0x1677
[PATCH] tg3: add 5714/5715 support Add complete support for 5714/5715. These chips are very similar to 5780 so the changes are very trivial. A TG3_FLG2_5780_CLASS flag is added to identify these chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-27 06:46:52 +08:00
#define PCI_DEVICE_ID_TIGON3_5715 0x1678
[TG3]: Add support for 5714S and 5715S Add support for 5714S and 5715S. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 09:47:20 +08:00
#define PCI_DEVICE_ID_TIGON3_5715S 0x1679
[TG3]: Add 5787 and 5754 basic support Add basic support for 2 new chips 5787 and 5754. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 14:27:35 +08:00
#define PCI_DEVICE_ID_TIGON3_5754 0x167a
[TG3]: Add 5755 support Add support for new chip 5755 which is very similar to 5787. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-23 17:28:06 +08:00
#define PCI_DEVICE_ID_TIGON3_5755 0x167b
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5751M 0x167d
#define PCI_DEVICE_ID_TIGON3_5751F 0x167e
[TG3]: Add 5787F device ID. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-07 16:20:22 +08:00
#define PCI_DEVICE_ID_TIGON3_5787F 0x167f
[TG3]: Add 5761 support This patch adds rest of the miscellaneous code required to support the 5761. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11 09:03:07 +08:00
#define PCI_DEVICE_ID_TIGON3_5761E 0x1680
#define PCI_DEVICE_ID_TIGON3_5761 0x1681
[TG3]: Add 5784 and 5764 support. This patch adds the support for 5784 and 5764 devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-08 14:28:35 +08:00
#define PCI_DEVICE_ID_TIGON3_5764 0x1684
cnic, bnx2i: Add support for new devices - 57800, 57810, and 57840 And change iSCSI RQ doorbell size from 16B to 64B to match new firmware. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20 23:15:56 +08:00
#define PCI_DEVICE_ID_NX2_57800 0x168a
#define PCI_DEVICE_ID_NX2_57840 0x168d
#define PCI_DEVICE_ID_NX2_57810 0x168e
[TG3]: Add 5787 and 5754 basic support Add basic support for 2 new chips 5787 and 5754. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 14:27:35 +08:00
#define PCI_DEVICE_ID_TIGON3_5787M 0x1693
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5782 0x1696
[TG3]: Add 5784 and 5764 support. This patch adds the support for 5784 and 5764 devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-08 14:28:35 +08:00
#define PCI_DEVICE_ID_TIGON3_5784 0x1698
[TG3]: Add 5786 PCI ID Add PCI ID for BCM5786 which is a variant of 5787. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-27 08:44:45 +08:00
#define PCI_DEVICE_ID_TIGON3_5786 0x169a
[TG3]: Add 5787 and 5754 basic support Add basic support for 2 new chips 5787 and 5754. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 14:27:35 +08:00
#define PCI_DEVICE_ID_TIGON3_5787 0x169b
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5788 0x169c
#define PCI_DEVICE_ID_TIGON3_5789 0x169d
[SCSI] bnx2fc: Include chip number in the symbolic name [jejb: move PCI_DEVICE_ID definitions to include/pci_ids.h] Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-03-09 05:28:51 +08:00
#define PCI_DEVICE_ID_NX2_57840_4_10 0x16a1
#define PCI_DEVICE_ID_NX2_57840_2_20 0x16a2
#define PCI_DEVICE_ID_NX2_57840_MF 0x16a4
cnic, bnx2i: Add support for new devices - 57800, 57810, and 57840 And change iSCSI RQ doorbell size from 16B to 64B to match new firmware. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20 23:15:56 +08:00
#define PCI_DEVICE_ID_NX2_57800_MF 0x16a5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5702X 0x16a6
#define PCI_DEVICE_ID_TIGON3_5703X 0x16a7
#define PCI_DEVICE_ID_TIGON3_5704S 0x16a8
cnic, bnx2i: Add support for new devices - 57800, 57810, and 57840 And change iSCSI RQ doorbell size from 16B to 64B to match new firmware. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20 23:15:56 +08:00
#define PCI_DEVICE_ID_NX2_57800_VF 0x16a9
[BNX2]: New Broadcom gigabit network driver. A new driver bnx2 for Broadcom bcm5706 is available. The patch also includes new 1000BASE-X advertisement bit definitions in mii.h Thanks to David Miller and Jeff Garzik for reviewing and their valuable feedback. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-27 04:03:09 +08:00
#define PCI_DEVICE_ID_NX2_5706S 0x16aa
[PATCH] bnx2: add 5708 support Add 5708 copper and serdes basic support, including 2.5 Gbps support on 5708 serdes. SPEED_2500 is also added to ethtool.h Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-05 00:45:49 +08:00
#define PCI_DEVICE_ID_NX2_5708S 0x16ac
cnic, bnx2i: Add support for new devices - 57800, 57810, and 57840 And change iSCSI RQ doorbell size from 16B to 64B to match new firmware. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20 23:15:56 +08:00
#define PCI_DEVICE_ID_NX2_57840_VF 0x16ad
#define PCI_DEVICE_ID_NX2_57810_MF 0x16ae
#define PCI_DEVICE_ID_NX2_57810_VF 0x16af
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6
#define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7
#define PCI_DEVICE_ID_TIGON3_5781 0x16dd
#define PCI_DEVICE_ID_TIGON3_5753 0x16f7
#define PCI_DEVICE_ID_TIGON3_5753M 0x16fd
#define PCI_DEVICE_ID_TIGON3_5753F 0x16fe
#define PCI_DEVICE_ID_TIGON3_5901 0x170d
#define PCI_DEVICE_ID_BCM4401B1 0x170c
#define PCI_DEVICE_ID_TIGON3_5901_2 0x170e
[TG3]: Add basic 5906 support. Add support for the new 5709 device. This is a new 10/100 Mbps chip. The mailbox access and firmware interface are quite different from all other tg3 chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 07:06:21 +08:00
#define PCI_DEVICE_ID_TIGON3_5906 0x1712
#define PCI_DEVICE_ID_TIGON3_5906M 0x1713
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_BCM4401 0x4401
#define PCI_DEVICE_ID_BCM4401B0 0x4402
#define PCI_VENDOR_ID_TOPIC 0x151f
#define PCI_DEVICE_ID_TOPIC_TP560 0x0000
8250_pci: Autodetect mainpine cards Add support for a whole range of boards. Some are partly autodetected but not fully correctly others (PCI Express notably) not at all. Stick all the right entries in. Thanks to Mainpine for information and testing. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 16:24:00 +08:00
#define PCI_VENDOR_ID_MAINPINE 0x1522
#define PCI_DEVICE_ID_MAINPINE_PBRIDGE 0x0100
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_ENE 0x1524
mmc: Driver for CB710/720 memory card reader (MMC part) The code is divided in two parts. There is a virtual 'bus' driver that handles PCI device and registers three new devices one per card reader type. The other driver handles SD/MMC part of the reader. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-23 02:33:59 +08:00
#define PCI_DEVICE_ID_ENE_CB710_FLASH 0x0510
mmc: Power quirk for ENE controllers Support for these devices was broken for 2.6.18-rc1 and later by commit 146ad66eac836c0b976c98f428d73e1f6a75270d, which added voltage level support. This restores the previous behaviour for these devices by ensuring that when the voltage is changed, only one write to set the voltage is performed. It may be that both writes are needed if the voltage is being changed between two non-zero values or that it's safe to ensure that only one write is done if the hardware only supports one voltage; I don't know whether either is the case nor can I test since I have only the one SD reader (1524:0550), and it supports just the one voltage. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-01-27 22:32:31 +08:00
#define PCI_DEVICE_ID_ENE_CB712_SD 0x0550
sdhci: add ene controller id ENE has a very weird design where an SDHCI device (0805) is presented on the PCI bus, but that device is non-functional, and the real device is hidden as a more generic device. Signed-off-by: Milko Krachounov <milko@3mhz.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-19 07:18:03 +08:00
#define PCI_DEVICE_ID_ENE_CB712_SD_2 0x0551
sdhci: add support to ENE-CB714 Added its pci_id and implemented a quirk for it because this controller needs to reset cmd and data when setting ios. Signed-off-by: Leandro Dorileo <dorileo@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26 05:47:04 +08:00
#define PCI_DEVICE_ID_ENE_CB714_SD 0x0750
#define PCI_DEVICE_ID_ENE_CB714_SD_2 0x0751
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_ENE_1211 0x1211
#define PCI_DEVICE_ID_ENE_1225 0x1225
#define PCI_DEVICE_ID_ENE_1410 0x1410
[PATCH] yenta: auto-tune EnE bridges for CardBus cards Echo Audio cardbus products are known to be incompatible with EnE bridges. in order to maybe solve the problem a EnE specific test bit has to be set, another cleared...but other setups have a good chance to break when just forcing the bits. so do the whole thingy automatically. The patch adds a hook in cb_alloc() that allows special tuning for the different chipsets. for ene just match the Echo products and set/clear the test bits, defaults to do the same thing as w/o the patch to not break working setups. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-08-22 13:29:26 +08:00
#define PCI_DEVICE_ID_ENE_710 0x1411
#define PCI_DEVICE_ID_ENE_712 0x1412
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_ENE_1420 0x1420
[PATCH] yenta: auto-tune EnE bridges for CardBus cards Echo Audio cardbus products are known to be incompatible with EnE bridges. in order to maybe solve the problem a EnE specific test bit has to be set, another cleared...but other setups have a good chance to break when just forcing the bits. so do the whole thingy automatically. The patch adds a hook in cb_alloc() that allows special tuning for the different chipsets. for ene just match the Echo products and set/clear the test bits, defaults to do the same thing as w/o the patch to not break working setups. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-08-22 13:29:26 +08:00
#define PCI_DEVICE_ID_ENE_720 0x1421
#define PCI_DEVICE_ID_ENE_722 0x1422
[PATCH] Perle multimodem card (PCI-RAS) detection Get the Perle quad-modem PCI card (PCI-RAS4) detected by serial driver. It may also get the PCI-RAS8 running, but can't guarantee as I didn't had one for testing. Signed-off-by: Thomas Hoehn <thomas.hoehn@avocent.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 17:46:05 +08:00
#define PCI_SUBVENDOR_ID_PERLE 0x155f
#define PCI_SUBDEVICE_ID_PCI_RAS4 0xf001
#define PCI_SUBDEVICE_ID_PCI_RAS8 0xf010
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_SYBA 0x1592
#define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782
#define PCI_DEVICE_ID_SYBA_1P_ECP 0x0783
#define PCI_VENDOR_ID_MORETON 0x15aa
#define PCI_DEVICE_ID_RASTEL_2PORT 0x2000
PCI: Move PCI_VENDOR_ID_VMWARE to pci_ids.h Move PCI_VENDOR_ID_VMWARE from device-specific files to pci_ids.h. It is useful to always have access to it, especially when accessing subsystem_vendor_id on emulated devices. [bhelgaas: keep pci_ids.h sorted and use lower-case hex] Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-25 01:12:41 +08:00
#define PCI_VENDOR_ID_VMWARE 0x15ad
vmxnet3: Move PCI Id to pci_ids.h The VMXNet3 PCI Id will be shared with our paravirtual RDMA driver. Moved it to the shared location in pci_ids.h. Suggested-by: Leon Romanovsky <leon@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03 10:10:21 +08:00
#define PCI_DEVICE_ID_VMWARE_VMXNET3 0x07b0
PCI: Move PCI_VENDOR_ID_VMWARE to pci_ids.h Move PCI_VENDOR_ID_VMWARE from device-specific files to pci_ids.h. It is useful to always have access to it, especially when accessing subsystem_vendor_id on emulated devices. [bhelgaas: keep pci_ids.h sorted and use lower-case hex] Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-25 01:12:41 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_ZOLTRIX 0x15b0
i7300_edac: start a driver for i7300 chipset (Clarksboro) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-25 10:22:57 +08:00
#define PCI_DEVICE_ID_ZOLTRIX_2BD0 0x2bd0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_MELLANOX 0x15b3
PCI: Add Mellanox device IDs Add Mellanox device IDs for use by the mlx4 driver and INTx quirks. [bhelgaas: sorted and adapted from http://lkml.kernel.org/r/1478011644-12080-1-git-send-email-noaos@mellanox.com] Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-18 06:06:56 +08:00
#define PCI_DEVICE_ID_MELLANOX_CONNECTX3 0x1003
#define PCI_DEVICE_ID_MELLANOX_CONNECTX3_PRO 0x1007
#define PCI_DEVICE_ID_MELLANOX_CONNECTIB 0x1011
#define PCI_DEVICE_ID_MELLANOX_CONNECTX4 0x1013
#define PCI_DEVICE_ID_MELLANOX_CONNECTX4_LX 0x1015
#define PCI_DEVICE_ID_MELLANOX_TAVOR 0x5a44
[PATCH] PCI Bus Parity Status-broken hardware attribute, EDAC foundation Currently, the EDAC (error detection and correction) modules that are in the kernel contain some features that need to be moved. After some good feedback on the PCI Parity detection code and interface (http://www.ussg.iu.edu/hypermail/linux/kernel/0603.1/0897.html) this patch ADDs an new attribute to the pci_dev structure: Namely the 'broken_parity_status' bit. When set this indicates that the respective hardware generates false positives of Parity errors. The EDAC "blacklist" solution was inferior and will be removed in a future patch. Also in this patch is a PCI quirk.c entry for an Infiniband PCI-X card which generates false positive parity errors. I am requesting comments on this AND on the possibility of a exposing this 'broken_parity_status' bit to userland via the PCI device sysfs directory for devices. This access would allow for enabling of this feature on new devices and for old devices that have their drivers updated. (SLES 9 SP3 did this on an ATI motherboard video device). There is a need to update such a PCI attribute between kernel releases. This patch just adds a storage place for the attribute and a quirk entry for a known bad PCI device. PCI Parity reaper/harvestor operations are in EDAC itself and will be refactored to use this PCI attribute instead of its own mechanisms (which are currently disabled) in the future. Signed-off-by: Doug Thompson <norsk5@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-09 08:06:09 +08:00
#define PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE 0x5a46
PCI: Add Mellanox device IDs Add Mellanox device IDs for use by the mlx4 driver and INTx quirks. [bhelgaas: sorted and adapted from http://lkml.kernel.org/r/1478011644-12080-1-git-send-email-noaos@mellanox.com] Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-18 06:06:56 +08:00
#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
#define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274
#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278
#define PCI_DEVICE_ID_MELLANOX_ARBEL 0x6282
#define PCI_DEVICE_ID_MELLANOX_HERMON_SDR 0x6340
#define PCI_DEVICE_ID_MELLANOX_HERMON_DDR 0x634a
#define PCI_DEVICE_ID_MELLANOX_HERMON_QDR 0x6354
#define PCI_DEVICE_ID_MELLANOX_HERMON_EN 0x6368
#define PCI_DEVICE_ID_MELLANOX_CONNECTX_EN 0x6372
#define PCI_DEVICE_ID_MELLANOX_HERMON_DDR_GEN2 0x6732
#define PCI_DEVICE_ID_MELLANOX_HERMON_QDR_GEN2 0x673c
#define PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_5_GEN2 0x6746
#define PCI_DEVICE_ID_MELLANOX_HERMON_EN_GEN2 0x6750
#define PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_T_GEN2 0x675a
#define PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_GEN2 0x6764
#define PCI_DEVICE_ID_MELLANOX_CONNECTX2 0x676e
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
Add PCI DFI vendor ID Add a define for DFI PCI vendor id. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-22 06:45:12 +08:00
#define PCI_VENDOR_ID_DFI 0x15bd
PCI: pci_ids, reorder some entries pci_ids, reorder some entries Some lines are not vendor sorted, reorder it to comply with the rest of document. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-18 16:55:30 +08:00
#define PCI_VENDOR_ID_QUICKNET 0x15e2
#define PCI_DEVICE_ID_QUICKNET_XJ 0x0500
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and pci_ids.h Add ADDI-DATA GmbH communication cards to 8250_pci driver. Supported cards are: APCI-7300, APCI-7420, APCI-7500, APCI-7800 APCI-7300-2, APCI-7420-2, APCI-7500-2 APCI-7300-3, APCI-7420-3, APCI-7500-3, APCI-7800-3 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Krauth J. <krauth.julien@addi-data.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:27:49 +08:00
/*
* ADDI-DATA GmbH communication cards <info@addi-data.com>
*/
#define PCI_VENDOR_ID_ADDIDATA 0x15B8
#define PCI_DEVICE_ID_ADDIDATA_APCI7500 0x7000
#define PCI_DEVICE_ID_ADDIDATA_APCI7420 0x7001
#define PCI_DEVICE_ID_ADDIDATA_APCI7300 0x7002
#define PCI_DEVICE_ID_ADDIDATA_APCI7500_2 0x7009
#define PCI_DEVICE_ID_ADDIDATA_APCI7420_2 0x700A
#define PCI_DEVICE_ID_ADDIDATA_APCI7300_2 0x700B
#define PCI_DEVICE_ID_ADDIDATA_APCI7500_3 0x700C
#define PCI_DEVICE_ID_ADDIDATA_APCI7420_3 0x700D
#define PCI_DEVICE_ID_ADDIDATA_APCI7300_3 0x700E
#define PCI_DEVICE_ID_ADDIDATA_APCI7800_3 0x700F
serial: add ADDI-DATA GmbH PCI-Express communication cards in 8250_pci.c and pci_ids.h Add support for ADDI-DATA GmbH PCI-Express communication cards: APCIe-7300 APCIe-7420 APCIe-7500 APCIe-7800 Warning: 8250_pci.c depends on pci_ids.h. 8250_pci.c Signed-off-by: Krauth Julien <Krauth.Julien@addi-data.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-27 07:50:04 +08:00
#define PCI_DEVICE_ID_ADDIDATA_APCIe7300 0x7010
#define PCI_DEVICE_ID_ADDIDATA_APCIe7420 0x7011
#define PCI_DEVICE_ID_ADDIDATA_APCIe7500 0x7012
#define PCI_DEVICE_ID_ADDIDATA_APCIe7800 0x7013
serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and pci_ids.h Add ADDI-DATA GmbH communication cards to 8250_pci driver. Supported cards are: APCI-7300, APCI-7420, APCI-7500, APCI-7800 APCI-7300-2, APCI-7420-2, APCI-7500-2 APCI-7300-3, APCI-7420-3, APCI-7500-3, APCI-7800-3 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Krauth J. <krauth.julien@addi-data.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:27:49 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_PDC 0x15e9
#define PCI_VENDOR_ID_FARSITE 0x1619
#define PCI_DEVICE_ID_FARSITE_T2P 0x0400
#define PCI_DEVICE_ID_FARSITE_T4P 0x0440
#define PCI_DEVICE_ID_FARSITE_T1U 0x0610
#define PCI_DEVICE_ID_FARSITE_T2U 0x0620
#define PCI_DEVICE_ID_FARSITE_T4U 0x0640
#define PCI_DEVICE_ID_FARSITE_TE1 0x1610
#define PCI_DEVICE_ID_FARSITE_TE1C 0x1612
[TG3]: Add TG3_FLG2_IS_NIC flag. Add Tg3_FLG2_IS_NIC flag to unambiguously determine whether the device is NIC or onboard. Previously, the EEPROM_WRITE_PROT flag was overloaded to also mean onboard. With the separation, we can support some devices that are onboard but do not use eeprom write protect. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-07 16:21:14 +08:00
#define PCI_VENDOR_ID_ARIMA 0x161f
[SCSI] add PCI_VENDOR_ID macro for Brocade in pci_ids.h Adds PCI_VENDOR_ID_BROCADE macro in include/linux/pci_ids.h file. This macro is used in MPT Fusion FC drivers to support Brocade branded FC controllers signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-17 16:10:10 +08:00
#define PCI_VENDOR_ID_BROCADE 0x1657
bna: Brocade 10Gb Ethernet device driver This is patch 1/6 which contains linux driver source for Brocade's BR1010/BR1020 10Gb CEE capable ethernet adapter. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 11:24:12 +08:00
#define PCI_DEVICE_ID_BROCADE_CT 0x0014
#define PCI_DEVICE_ID_BROCADE_FC_8G1P 0x0017
#define PCI_DEVICE_ID_BROCADE_CT_FC 0x0021
[SCSI] add PCI_VENDOR_ID macro for Brocade in pci_ids.h Adds PCI_VENDOR_ID_BROCADE macro in include/linux/pci_ids.h file. This macro is used in MPT Fusion FC drivers to support Brocade branded FC controllers signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-17 16:10:10 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_SIBYTE 0x166d
[MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systems It was obesrved that at least one older PCI card predating the requirement for the TRDY signal to respond within 16 clock ticks actually does not meet this rule nor even the power-on defaults of the PCI bridges found in development systems built around the Broadcom SiByte SOCs. Here is a patch that bumps up the timeout to the highest finite value supported by these chips, which is 255 clock ticks. The bridges affected are the SiByte SOC itself and the SP1011. This change does not effectively affect systems only having PCI option cards installed that meet the TRDY requirement of the current PCI spec. The rule was introduced with PCI 2.1, so any older card may make the system affected. If this is the case, performance of the system will suffer in return for the card working at all. If this is a concern, then the solution is not to use such cards. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2006-10-02 19:55:09 +08:00
#define PCI_DEVICE_ID_BCM1250_PCI 0x0001
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_BCM1250_HT 0x0002
PCI: pci_ids, add atheros and 3com_2 vendors pci_ids, add atheros and 3com_2 vendors Atheros is wifi vendor. 3com_2 (0xa727) is an vendor id for one card with ath chip. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-18 16:58:14 +08:00
#define PCI_VENDOR_ID_ATHEROS 0x168c
[PATCH] ide: add support for Netcell Revolution to pci-ide generic driver Adds support for Netcell Revolution to pci-ide generic driver by including it in the list of devices matched. Includes the Revolution in the list of simplex devices forced into DMA mode. Signed-off-by: Matt Gillette <matt.gillette@netcell.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-08-19 04:27:07 +08:00
#define PCI_VENDOR_ID_NETCELL 0x169c
#define PCI_DEVICE_ID_REVOLUTION 0x0044
ata_generic: Cenatek support Not much to do here. It's an ata memory as disk. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-20 00:07:58 +08:00
#define PCI_VENDOR_ID_CENATEK 0x16CA
#define PCI_DEVICE_ID_CENATEK_IDE 0x0001
usb: move definition of PCI_VENDOR_ID_SYNOPSYS to linux/pci_ids.h Removed FIXME from usb/dwc3/dwc3-pci.c by moving definition of PCI_VENDOR_ID_SYNOPSYS shared with usb/dwc2 to linux/pci_ids.h. Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-17 10:32:46 +08:00
#define PCI_VENDOR_ID_SYNOPSYS 0x16c3
PCI: Move Synopsys HAPS platform device IDs Move Synopsys HAPS platform device IDs to pci_ids.h so that both drivers/pci/quirks.c and dwc3-haps driver can reference these IDs. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-11 06:07:54 +08:00
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI 0xabce
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31 0xabcf
PCI: Add Synopsys endpoint EDDA Device ID Create and add Synopsys Endpoint EDDA Device ID to PCI ID list, since this ID is now being use on two different drivers (pci_endpoint_test.ko and dw-edma-pcie.ko). Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-04 21:29:25 +08:00
#define PCI_DEVICE_ID_SYNOPSYS_EDDA 0xedda
usb: move definition of PCI_VENDOR_ID_SYNOPSYS to linux/pci_ids.h Removed FIXME from usb/dwc3/dwc3-pci.c by moving definition of PCI_VENDOR_ID_SYNOPSYS shared with usb/dwc2 to linux/pci_ids.h. Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-17 10:32:46 +08:00
PCI: add USR vendor id and use it in r8169 and w6692 driver The PCI vendor id of U.S. Robotics isn't defined in pci_ids.h so far, only ISDN driver w6692 has a private definition. Move the definition to pci_ids.h and use it in the r8169 driver too. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-12 03:31:21 +08:00
#define PCI_VENDOR_ID_USR 0x16ec
[PATCH] PCI: Move various PCI IDs to header file Move various QLogic, Vitesse, and Intel storage controller PCI IDs to the main header file. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-10 16:49:14 +08:00
#define PCI_VENDOR_ID_VITESSE 0x1725
#define PCI_DEVICE_ID_VITESSE_VSC7174 0x7174
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_LINKSYS 0x1737
#define PCI_DEVICE_ID_LINKSYS_EG1064 0x1064
#define PCI_VENDOR_ID_ALTIMA 0x173b
#define PCI_DEVICE_ID_ALTIMA_AC1000 0x03e8
#define PCI_DEVICE_ID_ALTIMA_AC1001 0x03e9
#define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea
#define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb
pci: Add Cavium PCI vendor id This vendor id will be used by network (vNIC), USB (xHCI), SATA (AHCI), GPIO, I2C, MMC and maybe other drivers for ThunderX SoC. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-27 10:20:14 +08:00
#define PCI_VENDOR_ID_CAVIUM 0x177d
[media] tw68: Move PCI vendor and device IDs to pci_ids.h This commits moves the Intersil/Techwell PCI vendor ID, and the device IDs for the TW68 PCI video capture cards. This will allow to support future Intersil/Techwell devices without duplicating the IDs. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-21 21:09:10 +08:00
#define PCI_VENDOR_ID_TECHWELL 0x1797
#define PCI_DEVICE_ID_TECHWELL_6800 0x6800
#define PCI_DEVICE_ID_TECHWELL_6801 0x6801
#define PCI_DEVICE_ID_TECHWELL_6804 0x6804
#define PCI_DEVICE_ID_TECHWELL_6816_1 0x6810
#define PCI_DEVICE_ID_TECHWELL_6816_2 0x6811
#define PCI_DEVICE_ID_TECHWELL_6816_3 0x6812
#define PCI_DEVICE_ID_TECHWELL_6816_4 0x6813
Add rtl8180 wireless driver This patch adds a mac80211 based wireless driver for the rtl8180 and rtl8185 PCI wireless cards. Also included are some rtl8187 changes required due to the relationship between that driver and this one. Michael Wu is primarily responsible for the initial driver and rtl8185 support. Andreas Merello provided the additional rtl8180 support. Thanks to Jukka Ruohonen for the donating a rtl8185 card! It was very helpful for the rtl8225z2 code. The Signed-off-by information below is collected from the individual patches submitted to wireless-2.6 before merging this driver upstream. Signed-off-by: Andrea Merello <andreamrl@tiscali.it> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-15 02:43:16 +08:00
#define PCI_VENDOR_ID_BELKIN 0x1799
#define PCI_DEVICE_ID_BELKIN_F5D7010V7 0x701f
pci: add PCI identifiers for the RDC devices This patch defines the PCI identifiers found in the RDC R-321x System-on-Chip. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:33:36 +08:00
#define PCI_VENDOR_ID_RDC 0x17f3
#define PCI_DEVICE_ID_RDC_R6020 0x6020
#define PCI_DEVICE_ID_RDC_R6030 0x6030
#define PCI_DEVICE_ID_RDC_R6040 0x6040
#define PCI_DEVICE_ID_RDC_R6060 0x6060
#define PCI_DEVICE_ID_RDC_R6061 0x6061
it821x: Add ultra_mask quirk for Vortex86SX On Vortex86SX with IDE controller revision 0x11 ultra DMA must be disabled. This patch was tested by DMP and seems to work. It is a cleaned up version of their older Kernel patch: http://www.dmp.com.tw/tech/vortex86sx/patch-2.6.24-DMP.gz Tested-by: Shawn Lin <shawn@dmp.com.tw> Signed-off-by: Brandon Philips <bphilips@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-15 02:19:02 +08:00
#define PCI_DEVICE_ID_RDC_D1010 0x1010
pci: add PCI identifiers for the RDC devices This patch defines the PCI identifiers found in the RDC R-321x System-on-Chip. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:33:36 +08:00
PCI: Add Genesys Logic, Inc. Vendor ID Add the Genesys Logic, Inc. vendor ID to pci_ids.h. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Co-developed-by: Michael K Johnson <johnsonm@danlj.org> Signed-off-by: Michael K Johnson <johnsonm@danlj.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-27 08:33:09 +08:00
#define PCI_VENDOR_ID_GLI 0x17a0
ACPI: thinkpad-acpi: store ThinkPad model information Keep note of ThinkPad model, BIOS and EC firmware information, and log it on startup. Makes for far more readable code in places, too. This patch also adds Lenovo's PCI ID to the pci ids table. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-19 10:45:42 +08:00
#define PCI_VENDOR_ID_LENOVO 0x17aa
PCI: Add Qualcomm vendor ID Add the Qualcomm vendor ID to pci_ids.h and use it in quirks. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-08 04:52:55 +08:00
#define PCI_VENDOR_ID_QCOM 0x17cb
PCI: Add vendor ID for Cadence This patch adds a new PCI vendor ID for Cadence. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-01-31 04:56:53 +08:00
#define PCI_VENDOR_ID_CDNS 0x17cd
[SCSI] arcmsr: initial driver, version 1.20.00.13 arcmsr is a driver for the Areca Raid controller, a host based RAID subsystem that speaks SCSI at the firmware level. This patch is quite a clean up over the initial submission with contributions from: Randy Dunlap <rdunlap@xenotime.net> Christoph Hellwig <hch@lst.de> Matthew Wilcox <matthew@wil.cx> Adrian Bunk <bunk@stusta.de> Signed-off-by: Erich Chen <erich@areca.com.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-12 23:59:32 +08:00
#define PCI_VENDOR_ID_ARECA 0x17d3
#define PCI_DEVICE_ID_ARECA_1110 0x1110
#define PCI_DEVICE_ID_ARECA_1120 0x1120
#define PCI_DEVICE_ID_ARECA_1130 0x1130
#define PCI_DEVICE_ID_ARECA_1160 0x1160
#define PCI_DEVICE_ID_ARECA_1170 0x1170
[SCSI] arcmsr: 1.20.00.15: add SATA RAID plus other fixes Description: ** support ARC1200/1201/1202 SATA RAID adapter, which is named ACB_ADAPTER_TYPE_B ** modify the arcmsr_pci_slot_reset function ** modify the arcmsr_pci_ers_disconnect_forepart function ** modify the arcmsr_pci_ers_need_reset_forepart function  Signed-off-by: Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-09-13 17:26:40 +08:00
#define PCI_DEVICE_ID_ARECA_1200 0x1200
#define PCI_DEVICE_ID_ARECA_1201 0x1201
#define PCI_DEVICE_ID_ARECA_1202 0x1202
[SCSI] arcmsr: initial driver, version 1.20.00.13 arcmsr is a driver for the Areca Raid controller, a host based RAID subsystem that speaks SCSI at the firmware level. This patch is quite a clean up over the initial submission with contributions from: Randy Dunlap <rdunlap@xenotime.net> Christoph Hellwig <hch@lst.de> Matthew Wilcox <matthew@wil.cx> Adrian Bunk <bunk@stusta.de> Signed-off-by: Erich Chen <erich@areca.com.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-12 23:59:32 +08:00
#define PCI_DEVICE_ID_ARECA_1210 0x1210
#define PCI_DEVICE_ID_ARECA_1220 0x1220
#define PCI_DEVICE_ID_ARECA_1230 0x1230
#define PCI_DEVICE_ID_ARECA_1260 0x1260
#define PCI_DEVICE_ID_ARECA_1270 0x1270
#define PCI_DEVICE_ID_ARECA_1280 0x1280
#define PCI_DEVICE_ID_ARECA_1380 0x1380
#define PCI_DEVICE_ID_ARECA_1381 0x1381
#define PCI_DEVICE_ID_ARECA_1680 0x1680
#define PCI_DEVICE_ID_ARECA_1681 0x1681
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_S2IO 0x17d5
#define PCI_DEVICE_ID_S2IO_WIN 0x5731
#define PCI_DEVICE_ID_S2IO_UNI 0x5831
#define PCI_DEVICE_ID_HERC_WIN 0x5732
#define PCI_DEVICE_ID_HERC_UNI 0x5832
[PATCH] Add PCI IDs for Sitecom DC-105 Sitecom DC-105 PCI work with hfc_pci HiSax driver Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 01:32:53 +08:00
#define PCI_VENDOR_ID_SITECOM 0x182d
#define PCI_DEVICE_ID_SITECOM_DC105V2 0x3069
[PATCH] cleanup whitespace in pci_ids.h Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 01:34:17 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_TOPSPIN 0x1867
tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards Signed-off-by: Matt Schulte <matts@commtech-fastcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22 00:35:15 +08:00
#define PCI_VENDOR_ID_COMMTECH 0x18f7
sc92031: use device id directly instead of made-up name Instead of making up a name for the device ids, put them directly in the device id table. Also move the vendor id to pci_ids.h. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15 12:34:04 +08:00
#define PCI_VENDOR_ID_SILAN 0x1904
sh: pci: Move Renesas PCI IDs to a better place. Previously these IDs were only used by one driver, so there was not much need for having them generically defined. Now that this will no longer hold true, move them over. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20 14:37:25 +08:00
#define PCI_VENDOR_ID_RENESAS 0x1912
#define PCI_DEVICE_ID_RENESAS_SH7781 0x0001
#define PCI_DEVICE_ID_RENESAS_SH7780 0x0002
#define PCI_DEVICE_ID_RENESAS_SH7763 0x0004
#define PCI_DEVICE_ID_RENESAS_SH7785 0x0007
#define PCI_DEVICE_ID_RENESAS_SH7786 0x0010
PCI: Add Solarflare vendor ID and SFC4000 device IDs These will be shared between the sfc driver and a PCI quirk. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-06 05:28:05 +08:00
#define PCI_VENDOR_ID_SOLARFLARE 0x1924
#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0 0x0703
#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1 0x6703
#define PCI_DEVICE_ID_SOLARFLARE_SFC4000B 0x0710
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_TDI 0x192E
#define PCI_DEVICE_ID_TDI_EHCI 0x0101
[POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs Also add 8641/8641D device IDs as well. All of which already exist or have been submitted to The Linux PCI ID Repository at: http://pci-ids.ucw.cz/ CC-to: pci-ids@ucw.cz Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-05 01:27:14 +08:00
#define PCI_VENDOR_ID_FREESCALE 0x1957
powerpc/fsl_pci: add quirk for mpc8308 pcie bridge This patch adds the quirk for PCIE controller found on Freescale MPC8308. The quirk is the same as for other MPC83xx processors. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-08 18:10:38 +08:00
#define PCI_DEVICE_ID_MPC8308 0xc006
powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode support This patch adds support for PCI-Express controllers as found on the newer MPC83xx chips. The work is loosely based on the Tony Li's patch[1], but unlike the original patch, this patch implements sliding window for the Type 1 transactions using outbound window translations, so we don't have to ioremap the whole PCI-E configuration space. [1] http://ozlabs.org/pipermail/linuxppc-dev/2008-January/049028.html Signed-off-by: Tony Li <tony.li@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-09 05:55:39 +08:00
#define PCI_DEVICE_ID_MPC8315E 0x00b4
#define PCI_DEVICE_ID_MPC8315 0x00b5
#define PCI_DEVICE_ID_MPC8314E 0x00b6
#define PCI_DEVICE_ID_MPC8314 0x00b7
#define PCI_DEVICE_ID_MPC8378E 0x00c4
#define PCI_DEVICE_ID_MPC8378 0x00c5
#define PCI_DEVICE_ID_MPC8377E 0x00c6
#define PCI_DEVICE_ID_MPC8377 0x00c7
[POWERPC] 85xx: Added needed MPC85xx PCI device IDs Added the MPC85xx PCI device IDs that we need for the quirks we have. Also, fixed the MPC8567E, MPC8567 device IDs which had the wrong value. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 04:47:26 +08:00
#define PCI_DEVICE_ID_MPC8548E 0x0012
#define PCI_DEVICE_ID_MPC8548 0x0013
#define PCI_DEVICE_ID_MPC8543E 0x0014
#define PCI_DEVICE_ID_MPC8543 0x0015
#define PCI_DEVICE_ID_MPC8547E 0x0018
#define PCI_DEVICE_ID_MPC8545E 0x0019
#define PCI_DEVICE_ID_MPC8545 0x001a
powerpc/85xx: Add PCI IDs for MPC8569 family processors This patch adds PCI IDs for MPC8569 and MPC8569E processors, plus adds appropriate quirks for these IDs, and thus makes PCI-E actually work on MPC8569E-MDS boards. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-02 10:16:47 +08:00
#define PCI_DEVICE_ID_MPC8569E 0x0061
#define PCI_DEVICE_ID_MPC8569 0x0060
[POWERPC] 85xx: Added needed MPC85xx PCI device IDs Added the MPC85xx PCI device IDs that we need for the quirks we have. Also, fixed the MPC8567E, MPC8567 device IDs which had the wrong value. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24 04:47:26 +08:00
#define PCI_DEVICE_ID_MPC8568E 0x0020
#define PCI_DEVICE_ID_MPC8568 0x0021
#define PCI_DEVICE_ID_MPC8567E 0x0022
#define PCI_DEVICE_ID_MPC8567 0x0023
[POWERPC] Fix PCI Device ID for MPC8544/8533 processors The initial user manuals for MPC8544/8533 had some issues with properly documenting the device IDs for MPC8544/8533. These processors are almost identical and both show up on the reference boards. Fix up the quirks for PCIe support to handle MPC8533/E. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 08:15:31 +08:00
#define PCI_DEVICE_ID_MPC8533E 0x0030
#define PCI_DEVICE_ID_MPC8533 0x0031
#define PCI_DEVICE_ID_MPC8544E 0x0032
#define PCI_DEVICE_ID_MPC8544 0x0033
[POWERPC] 85xx: Add basic Uniprocessor MPC8572 DS port Added basic board port for MPC8572 DS reference platform that is similiar to the MPC8544/33 DS reference platform in uniprocessor mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-11 14:25:43 +08:00
#define PCI_DEVICE_ID_MPC8572E 0x0040
#define PCI_DEVICE_ID_MPC8572 0x0041
powerpc/85xx: Add support for MPC8536DS Add support for the MPC8536 process and MPC8536DS reference board. The MPC8536 is an e500v2 based SoC which eTSEC, USB, SATA, PCI, and PCIe. The USB and SATA IP blocks are similiar to those on the PQ2 Pro SoCs and thus use the same drivers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-02 14:36:15 +08:00
#define PCI_DEVICE_ID_MPC8536E 0x0050
#define PCI_DEVICE_ID_MPC8536 0x0051
powerpc/85xx: Add P2020DS board support The P2020 is a dual e500v2 core based SOC with: * 3 PCIe controllers * 2 General purpose DMA controllers * 2 sRIO controllers * 3 eTSECS * USB 2.0 * SDHC * SPI, I2C, DUART * enhanced localbus * and optional Security (P2020E) security w/XOR acceleration The p2020 DS reference board is pretty similar to the existing MPC85xx DS boards and has a ULI 1575 connected on one of the PCIe controllers. Signed-off-by: Ted Peters <Ted.Peters@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-16 03:38:40 +08:00
#define PCI_DEVICE_ID_P2020E 0x0070
#define PCI_DEVICE_ID_P2020 0x0071
powerpc/fsl: Add PCI device ids for new QoirQ chips Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-19 02:55:55 +08:00
#define PCI_DEVICE_ID_P2010E 0x0078
#define PCI_DEVICE_ID_P2010 0x0079
#define PCI_DEVICE_ID_P1020E 0x0100
#define PCI_DEVICE_ID_P1020 0x0101
powerpc/85xx: Add P1021 PCI IDs and quirks This is needed for proper PCI-E support on P1021 SoCs. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-08 22:03:33 +08:00
#define PCI_DEVICE_ID_P1021E 0x0102
#define PCI_DEVICE_ID_P1021 0x0103
powerpc/fsl: Add PCI device ids for new QoirQ chips Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-19 02:55:55 +08:00
#define PCI_DEVICE_ID_P1011E 0x0108
#define PCI_DEVICE_ID_P1011 0x0109
#define PCI_DEVICE_ID_P1022E 0x0110
#define PCI_DEVICE_ID_P1022 0x0111
#define PCI_DEVICE_ID_P1013E 0x0118
#define PCI_DEVICE_ID_P1013 0x0119
#define PCI_DEVICE_ID_P4080E 0x0400
#define PCI_DEVICE_ID_P4080 0x0401
#define PCI_DEVICE_ID_P4040E 0x0408
#define PCI_DEVICE_ID_P4040 0x0409
powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chips Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-09-25 02:34:42 +08:00
#define PCI_DEVICE_ID_P2040E 0x0410
#define PCI_DEVICE_ID_P2040 0x0411
#define PCI_DEVICE_ID_P3041E 0x041E
#define PCI_DEVICE_ID_P3041 0x041F
#define PCI_DEVICE_ID_P5020E 0x0420
#define PCI_DEVICE_ID_P5020 0x0421
#define PCI_DEVICE_ID_P5010E 0x0428
#define PCI_DEVICE_ID_P5010 0x0429
[POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs Also add 8641/8641D device IDs as well. All of which already exist or have been submitted to The Linux PCI ID Repository at: http://pci-ids.ucw.cz/ CC-to: pci-ids@ucw.cz Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-05 01:27:14 +08:00
#define PCI_DEVICE_ID_MPC8641 0x7010
#define PCI_DEVICE_ID_MPC8641D 0x7011
[POWERPC] Treat 8610 PCIe host bridge as transparent Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 04:09:50 +08:00
#define PCI_DEVICE_ID_MPC8610 0x7018
[POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs Also add 8641/8641D device IDs as well. All of which already exist or have been submitted to The Linux PCI ID Repository at: http://pci-ids.ucw.cz/ CC-to: pci-ids@ucw.cz Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-05 01:27:14 +08:00
PA Semi PWRficient Ethernet driver Driver for the PA Semi PWRficient on-chip Ethernet (1/10G) Basic enablement, will be complemented with performance enhancements over time. PHY support will be added as well. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-01 11:43:54 +08:00
#define PCI_VENDOR_ID_PASEMI 0x1959
Add Attansic L1 ethernet driver. This driver is a modified version of the Attansic reference driver for the L1 ethernet adapter. Attansic has granted permission for its inclusion in the mainline kernel. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-08 23:42:37 +08:00
#define PCI_VENDOR_ID_ATTANSIC 0x1969
atl1: add L1 device id to pci_ids, then use it Add device id for the Attansic L1 chip to pci_ids.h, then use it. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-15 10:17:01 +08:00
#define PCI_DEVICE_ID_ATTANSIC_L1 0x1048
atl2: add atl2 driver Driver for Atheros L2 10/100 network device. Includes necessary changes for Kconfig, Makefile, and pci_ids.h. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-15 08:56:10 +08:00
#define PCI_DEVICE_ID_ATTANSIC_L2 0x2048
Add Attansic L1 ethernet driver. This driver is a modified version of the Attansic reference driver for the L1 ethernet adapter. Attansic has granted permission for its inclusion in the mainline kernel. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-08 23:42:37 +08:00
[PCI] Add JMicron PCI ID constants They will be used in several IDE/libata files. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-06 11:02:48 +08:00
#define PCI_VENDOR_ID_JMICRON 0x197B
#define PCI_DEVICE_ID_JMICRON_JMB360 0x2360
#define PCI_DEVICE_ID_JMICRON_JMB361 0x2361
ahci: add pci quirk for JMB362 JMB362 is a new variant of jmicron controller which is similar to JMB360 but has two SATA ports instead of one. As there is no PATA port, single function AHCI mode can be used as in JMB360. Add pci quirk for JMB362. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Aries Lee <arieslee@jmicron.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-06-03 17:57:04 +08:00
#define PCI_DEVICE_ID_JMICRON_JMB362 0x2362
[PCI] Add JMicron PCI ID constants They will be used in several IDE/libata files. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-06 11:02:48 +08:00
#define PCI_DEVICE_ID_JMICRON_JMB363 0x2363
libata: more PCI IDs for jmicron controllers Add support for JMB364 and 369. Patch-originally-from: Aries Lee <arieslee@jmicron.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-07-30 17:42:42 +08:00
#define PCI_DEVICE_ID_JMICRON_JMB364 0x2364
[PCI] Add JMicron PCI ID constants They will be used in several IDE/libata files. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-06 11:02:48 +08:00
#define PCI_DEVICE_ID_JMICRON_JMB365 0x2365
#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366
#define PCI_DEVICE_ID_JMICRON_JMB368 0x2368
libata: more PCI IDs for jmicron controllers Add support for JMB364 and 369. Patch-originally-from: Aries Lee <arieslee@jmicron.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-07-30 17:42:42 +08:00
#define PCI_DEVICE_ID_JMICRON_JMB369 0x2369
sdhci: support JMicron JMB38x chips The JMicron JMB38x chip doesn't support transfers that aren't 32-bit aligned (both size and start address). It also doesn't like switching between PIO and DMA mode, so it needs to be reset after each request. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-12-03 02:58:16 +08:00
#define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381
sdhci: support JMicron secondary interface JMicron chips sometimes have two interfaces to work around limitations in Microsoft's sdhci driver. This patch allows us to use either interface. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-05 01:36:59 +08:00
#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382
memstick: add support for JMicron jmb38x MemoryStick host controller Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-11 02:43:43 +08:00
#define PCI_DEVICE_ID_JMICRON_JMB38X_MS 0x2383
memstick: add support for JMicron JMB 385 and 390 controllers Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 09:01:03 +08:00
#define PCI_DEVICE_ID_JMICRON_JMB385_MS 0x2388
mmc: Add support for JMicron 388 SD/MMC controller JMicron 388 SD/MMC combo controller supports the 1.8V low-voltage for SD, but MMC doesn't work with the low-voltage, resulting in an error at probing. This patch adds the support for multiple voltage mask per device type, so that SD works with 1.8V while MMC forces 3.3V. Here new ocr_avail_* fields for each device are introduced, so that the actual OCR mask is switched dynamically. Also, the restriction of low-voltage in core/sd.c is removed when the bit is allowed explicitly via ocr_avail_sd mask. This patch was rewritten from scratch based on Aries' original code. Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-08 17:04:30 +08:00
#define PCI_DEVICE_ID_JMICRON_JMB388_SD 0x2391
#define PCI_DEVICE_ID_JMICRON_JMB388_ESD 0x2392
memstick: add support for JMicron JMB 385 and 390 controllers Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 09:01:03 +08:00
#define PCI_DEVICE_ID_JMICRON_JMB390_MS 0x2393
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] Add missing KORENIX PCI ID's Oops, sorry about that. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-14 01:56:11 +08:00
#define PCI_VENDOR_ID_KORENIX 0x1982
#define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600
#define PCI_DEVICE_ID_KORENIX_JETCARDF1 0x16ff
serial: add support for Korenix JetCard Add different model (with a different PCI ID) to support Korenix JetCard. Signed-off-by: Kiros Yeh <kiros@korenix.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-22 08:26:48 +08:00
#define PCI_DEVICE_ID_KORENIX_JETCARDF2 0x1700
#define PCI_DEVICE_ID_KORENIX_JETCARDF3 0x17ff
[PATCH] Add missing KORENIX PCI ID's Oops, sorry about that. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-14 01:56:11 +08:00
PCI: Fix typos and whitespace errors Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2019-05-30 21:05:58 +08:00
#define PCI_VENDOR_ID_HUAWEI 0x19e5
PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports The PCIe Root Port in Hip06/Hip07 SoCs advertises an MSI capability, but it cannot generate MSIs. It can transfer MSI/MSI-X from downstream devices, but does not support MSI/MSI-X itself. Add a quirk to prevent use of MSI/MSI-X by the Root Port. [bhelgaas: changelog, sort vendor ID #define, drop device ID #define] Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
2017-02-04 05:02:07 +08:00
PCI: Add Netronome vendor and device IDs Device IDs for the Netronome NFP3200, NFP3240, NFP6000, and NFP6000 SR-IOV devices. Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com> [simon: edited changelog] Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-09-30 14:35:06 +08:00
#define PCI_VENDOR_ID_NETRONOME 0x19ee
PCI: Add Netronome NFP4000 PF device ID Add the device ID for the PF of the NFP4000. The device ID for the VF, 0x6003, is already present as PCI_DEVICE_ID_NETRONOME_NFP6000_VF. Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-12-11 10:30:11 +08:00
#define PCI_DEVICE_ID_NETRONOME_NFP4000 0x4000
PCI: Limit config space size for Netronome NFP5000 Like the NFP4000 and NFP6000, the NFP5000 as an erratum where reading/ writing to PCI config space addresses above 0x600 can cause the NFP to generate PCIe completion timeouts. Limit the NFP5000's PF's config space size to 0x600 bytes as is already done for the NFP4000 and NFP6000. The NFP5000's VF is 0x6003 (PCI_DEVICE_ID_NETRONOME_NFP6000_VF), the same device ID as the NFP6000's VF. Thus, its config space is already limited by the existing use of quirk_nfp6000(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tony Egan <tony.egan@netronome.com>
2018-08-15 07:48:50 +08:00
#define PCI_DEVICE_ID_NETRONOME_NFP5000 0x5000
PCI: Add Netronome vendor and device IDs Device IDs for the Netronome NFP3200, NFP3240, NFP6000, and NFP6000 SR-IOV devices. Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com> [simon: edited changelog] Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-09-30 14:35:06 +08:00
#define PCI_DEVICE_ID_NETRONOME_NFP6000 0x6000
#define PCI_DEVICE_ID_NETRONOME_NFP6000_VF 0x6003
ath5k: Support LED's on Acer Extensa 5620z Add vendor ID for Quanta Microsystems and update the led table with the reported device. Reported-by: Scott Barnes <nekoreeve@gmail.com> Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-22 08:41:13 +08:00
#define PCI_VENDOR_ID_QMI 0x1a32
ath5k: add support for Fukato Datacask Jupiter LEDs This adds support for the LEDs on the Jupiter netbook. Reported-by: Martin Bammer <mrb74@gmx.at> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-05 23:01:20 +08:00
#define PCI_VENDOR_ID_AZWAVE 0x1a3b
PCI: Add QEMU top-level IDs for (sub)vendor & device Introduce PCI_VENDOR/PCI_SUBVENDOR/PCI_SUBDEVICE defines to replace the constants scattered in the kernel already used to detect QEMU. They are defined in the QEMU codebase per docs/specs/pci-ids.txt. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-03-07 06:02:30 +08:00
#define PCI_VENDOR_ID_REDHAT_QUMRANET 0x1af4
#define PCI_SUBVENDOR_ID_REDHAT_QUMRANET 0x1af4
#define PCI_SUBDEVICE_ID_QEMU 0x1100
[libata] ahci: Add ASMedia ASM1061 support Signed-off-by: Keng-Yu Lin <kengyu@canonical.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-09 14:47:36 +08:00
#define PCI_VENDOR_ID_ASMEDIA 0x1b21
PCI: Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h Instead of duplicating the PCI_VENDOR_ID_REDHAT definition everywhere, move it to include/linux/pci_ids.h. [bhelgaas: also update MDPY_PCI_VENDOR_ID] Link: https://lore.kernel.org/r/1594195170-11119-1-git-send-email-chenhc@lemote.com Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2020-07-08 15:59:30 +08:00
#define PCI_VENDOR_ID_REDHAT 0x1b36
PCI: Add Silicom Denmark vendor ID Update pci_ids.h with the vendor ID for Silicom Denmark. The define is going to be referenced in driver(s) for FPGA accelerated smart NICs. Link: https://lore.kernel.org/r/20210208150158.2877414-1-mhu@silicom.dk Signed-off-by: Martin Hundebøll <mhu@silicom.dk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tom Rix <trix@redhat.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-02-08 23:01:57 +08:00
#define PCI_VENDOR_ID_SILICOM_DENMARK 0x1c2c
PCI: Add Amazon's Annapurna Labs vendor ID Add Amazon's Annapurna Labs vendor ID to pci_ids.h. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-12 21:00:39 +08:00
#define PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS 0x1c36
PCI: Add CircuitCo vendor ID and subsystem ID Add CircuitCo's newly created VENDOR ID and their first board subsystem ID for the MinnowBoard. [bhelgaas: sort, change DEVICE_ID to SUBSYSTEM_ID] Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-26 10:08:46 +08:00
#define PCI_VENDOR_ID_CIRCUITCO 0x1cc8
#define PCI_SUBSYSTEM_ID_CIRCUITCO_MINNOWBOARD 0x0001
PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFs Some SR-IOV PF devices provide no functionality other than acting as a means of enabling VFs. For these devices, we want to enable the VFs and assign them to guest virtual machines, but there's no need to have a driver for the PF itself. Add a new pci-pf-stub driver to claim those PF devices and provide the generic VF enable functionality. An administrator can use the sysfs "sriov_numvfs" file to enable VFs, then assign them to guests. For now I only have one example ID provided by Amazon in terms of devices that require this functionality. The general idea is that in the future we will see other devices added as vendors come up with devices where the PF is more or less just a lightweight shim used to allocate VFs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-04-25 05:47:16 +08:00
#define PCI_VENDOR_ID_AMAZON 0x1d0f
PCI: Add Zhaoxin Vendor ID Add Zhaoxin Vendor ID to pci_ids.h Link: https://lore.kernel.org/r/20200327091148.5190-2-RaymondPang-oc@zhaoxin.com Signed-off-by: Raymond Pang <RaymondPang-oc@zhaoxin.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-27 17:11:46 +08:00
#define PCI_VENDOR_ID_ZHAOXIN 0x1d17
x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge Hygon's PCI vendor ID is 0x1d94, and there are PCI devices 0x1450/0x1463/0x1464 for the host bridge on the Hygon Dhyana platform. Add Hygon Dhyana support to the PCI and northbridge subsystems by using the code path of AMD family 17h. [ bp: Massage commit message, sort local vars into reverse xmas tree order and move the amd_northbridges.num check up. ] Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: x86@kernel.org Cc: thomas.lendacky@amd.com Cc: helgaas@kernel.org Cc: linux-pci@vger.kernel.org Link: https://lkml.kernel.org/r/5f8877bd413f2ea0833378dd5454df0720e1c0df.1537885177.git.puwen@hygon.cn
2018-09-25 22:46:11 +08:00
#define PCI_VENDOR_ID_HYGON 0x1d94
PCI: Add HXT vendor ID Add the HXT vendor ID to pci_ids.h. Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com> [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> CC: Joey Zheng <yu.zheng@hxt-semitech.com>
2019-02-02 07:11:14 +08:00
#define PCI_VENDOR_ID_HXT 0x1dbf
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
[NET]: Add Tehuti network driver. [ Ported to napi_struct changes... -DaveM ] Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-18 09:50:36 +08:00
#define PCI_VENDOR_ID_TEHUTI 0x1fc9
#define PCI_DEVICE_ID_TEHUTI_3009 0x3009
#define PCI_DEVICE_ID_TEHUTI_3010 0x3010
#define PCI_DEVICE_ID_TEHUTI_3014 0x3014
serial, pci_ids: Move duplicate IDs to PCI IDs database PCI ID database is for IDs used across several drivers. Here is the case for SUNIX combo cards. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03 00:46:36 +08:00
#define PCI_VENDOR_ID_SUNIX 0x1fd4
#define PCI_DEVICE_ID_SUNIX_1999 0x1999
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_HINT 0x3388
#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
#define PCI_VENDOR_ID_3DLABS 0x3d3d
#define PCI_DEVICE_ID_3DLABS_PERMEDIA2 0x0007
#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V 0x0009
netxen: add pci ids Define old and new pci vendor and device ids. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-12 21:55:14 +08:00
#define PCI_VENDOR_ID_NETXEN 0x4040
#define PCI_DEVICE_ID_NX2031_10GXSR 0x0001
#define PCI_DEVICE_ID_NX2031_10GCX4 0x0002
#define PCI_DEVICE_ID_NX2031_4GCU 0x0003
#define PCI_DEVICE_ID_NX2031_IMEZ 0x0004
#define PCI_DEVICE_ID_NX2031_HMEZ 0x0005
#define PCI_DEVICE_ID_NX2031_XG_MGMT 0x0024
#define PCI_DEVICE_ID_NX2031_XG_MGMT2 0x0025
#define PCI_DEVICE_ID_NX3031 0x0100
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_AKS 0x416c
#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100
watchdog: wdt_pci.c: move ids to pci_ids.h Move the VENDOR/DEVICE ids to pci_ids.h. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-05-22 07:38:52 +08:00
#define PCI_VENDOR_ID_ACCESSIO 0x494f
#define PCI_DEVICE_ID_ACCESSIO_WDG_CSM 0x22c0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_S3 0x5333
#define PCI_DEVICE_ID_S3_TRIO 0x8811
#define PCI_DEVICE_ID_S3_868 0x8880
#define PCI_DEVICE_ID_S3_968 0x88f0
#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25
#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04
#define PCI_DEVICE_ID_S3_SONICVIBES 0xca00
#define PCI_VENDOR_ID_DUNORD 0x5544
#define PCI_DEVICE_ID_DUNORD_I3000 0x0001
#define PCI_VENDOR_ID_DCI 0x6666
#define PCI_DEVICE_ID_DCI_PCCOM4 0x0001
#define PCI_DEVICE_ID_DCI_PCCOM8 0x0002
[SERIAL] Add 8250 support for Decision Computer International Co. PCCOM2 There is a new device which is look like: Serial controller: Decision Computer International Co. PCCOM2 (rev 02) (prog-if 02 [16550]) 0700: 6666:0004 (rev 02) (prog-if 02) Flags: medium devsel, IRQ 177 Memory at fe000000 (32-bit, non-prefetchable) [size=128] I/O ports at e880 [size=128] I/O ports at e400 [size=256] It has two 16550A, and is not listed in kernel, although the manufacturer clams that it is supported... I've created the following patch, it only add the new PCI id and the card to the repository, it seems to work. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-18 19:47:33 +08:00
#define PCI_DEVICE_ID_DCI_PCCOM2 0x0004
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_INTEL 0x8086
#define PCI_DEVICE_ID_INTEL_EESSC 0x0008
[PATCH] PCI: 6700/6702PXH quirk On the 6700/6702 PXH part, a MSI may get corrupted if an ACPI hotplug driver and SHPC driver in MSI mode are used together. This patch will prevent MSI from being enabled for the SHPC as part of an early pci quirk, as well as on any pci device which sets the no_msi bit. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-17 06:15:58 +08:00
#define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320
#define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321
#define PCI_DEVICE_ID_INTEL_PXH_0 0x0329
#define PCI_DEVICE_ID_INTEL_PXH_1 0x032A
#define PCI_DEVICE_ID_INTEL_PXHV 0x032C
pci: add PCI IDs for devices that need boot irq quirks Signed-off-by: Stefan Assmann <sassmann@suse.de> Signed-off-by: Olaf Dabrunz <od@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-11 22:35:13 +08:00
#define PCI_DEVICE_ID_INTEL_80332_0 0x0330
#define PCI_DEVICE_ID_INTEL_80332_1 0x0332
#define PCI_DEVICE_ID_INTEL_80333_0 0x0370
#define PCI_DEVICE_ID_INTEL_80333_1 0x0372
PCI: Add Intel QuickAssist device IDs Add device IDs for the following Intel QuickAssist devices: DH895XCC, C3XXX and C62X. The defines in this patch are going to be referenced in two independent drivers, qat and vfio-pci. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-07-28 03:43:39 +08:00
#define PCI_DEVICE_ID_INTEL_QAT_DH895XCC 0x0435
#define PCI_DEVICE_ID_INTEL_QAT_DH895XCC_VF 0x0443
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82375 0x0482
#define PCI_DEVICE_ID_INTEL_82424 0x0483
#define PCI_DEVICE_ID_INTEL_82378 0x0484
mmc: sdhci: Intel Medfield support Basic support for the Intel Medfield devices Give them their own quirks as we will need to update this later. Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-04 22:24:52 +08:00
#define PCI_DEVICE_ID_INTEL_MRST_SD0 0x0807
#define PCI_DEVICE_ID_INTEL_MRST_SD1 0x0808
#define PCI_DEVICE_ID_INTEL_MFD_SD 0x0820
#define PCI_DEVICE_ID_INTEL_MFD_SDIO1 0x0821
#define PCI_DEVICE_ID_INTEL_MFD_SDIO2 0x0822
#define PCI_DEVICE_ID_INTEL_MFD_EMMC0 0x0823
#define PCI_DEVICE_ID_INTEL_MFD_EMMC1 0x0824
mmc: sdhci: Fix crash on boot with C0 stepping Moorestown platforms SDHC2 is newly added in C0 stepping of Langwell. Without the Moorestown specific quirk, the default pci_probe will be called and crash the kernel. This patch unblocks the crash problem on C0 by using the same probing function as HC1, which limits the number of slots to one. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-09 21:57:29 +08:00
#define PCI_DEVICE_ID_INTEL_MRST_SD2 0x084F
pci_ids: Add support for Intel Quark ILB This patch adds the PCI id for Intel Quark ILB. It will be used for GPIO and Multifunction device driver. Signed-off-by: Josef Ahmad <josef.ahmad@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-02 18:45:20 +08:00
#define PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB 0x095E
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_I960 0x0960
#define PCI_DEVICE_ID_INTEL_I960RM 0x0962
pci_ids: Add Intel Centerton Legacy Block DeviceID This patch adds the Integrated Legacy Block DeviceID for the Centerton CPU. It will be used in the GPIO and Multifunction Devices driver. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-24 00:23:56 +08:00
#define PCI_DEVICE_ID_INTEL_CENTERTON_ILB 0x0c60
8250: fix boot hang with serial console when using with Serial Over Lan port Intel 8257x Ethernet boards have a feature called Serial Over Lan. This feature works by emulating a serial port, and it is detected by kernel as a normal 8250 port. However, this emulation is not perfect, as also noticed on changeset 7500b1f602aad75901774a67a687ee985d85893f. Before this patch, the kernel were trying to check if the serial TX is capable of work using IRQ's. This were done with a code similar this: serial_outp(up, UART_IER, UART_IER_THRI); lsr = serial_in(up, UART_LSR); iir = serial_in(up, UART_IIR); serial_outp(up, UART_IER, 0); if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) up->bugs |= UART_BUG_TXEN; This works fine for other 8250 ports, but, on 8250-emulated SoL port, the chip is a little lazy to down UART_IIR_NO_INT at UART_IIR register. Due to that, UART_BUG_TXEN is sometimes enabled. However, as TX IRQ keeps working, and the TX polling is now enabled, the driver miss-interprets the IRQ received later, hanging up the machine until a key is pressed at the serial console. This is the 6 version of this patch. Previous versions were trying to introduce a large enough delay between serial_outp and serial_in(up, UART_IIR), but not taking forever. However, the needed delay couldn't be safely determined. At the experimental tests, a delay of 1us solves most of the cases, but still hangs sometimes. Increasing the delay to 5us was better, but still doesn't solve. A very high delay of 50 ms seemed to work every time. However, poking around with delays and pray for it to be enough doesn't seem to be a good approach, even for a quirk. So, instead of playing with random large arbitrary delays, let's just disable UART_BUG_TXEN for all SoL ports. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-21 07:38:52 +08:00
#define PCI_DEVICE_ID_INTEL_8257X_SOL 0x1062
#define PCI_DEVICE_ID_INTEL_82573E_SOL 0x1085
#define PCI_DEVICE_ID_INTEL_82573L_SOL 0x108F
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82815_MC 0x1130
#define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132
#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221
i7300_edac: start a driver for i7300 chipset (Clarksboro) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-25 10:22:57 +08:00
#define PCI_DEVICE_ID_INTEL_7505_0 0x2550
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_7205_0 0x255d
#define PCI_DEVICE_ID_INTEL_82437 0x122d
#define PCI_DEVICE_ID_INTEL_82371FB_0 0x122e
#define PCI_DEVICE_ID_INTEL_82371FB_1 0x1230
#define PCI_DEVICE_ID_INTEL_82371MX 0x1234
#define PCI_DEVICE_ID_INTEL_82441 0x1237
#define PCI_DEVICE_ID_INTEL_82380FB 0x124b
#define PCI_DEVICE_ID_INTEL_82439 0x1250
PCI: Add Intel Thunderbolt device IDs Intel Gen 1 and 2 chips use the same ID for NHI, bridges and switch. Gen 3 chips and onward use a distinct ID for the NHI. No functional change intended. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andreas Noever <andreas.noever@gmail.com>
2016-03-20 20:57:20 +08:00
#define PCI_DEVICE_ID_INTEL_LIGHT_RIDGE 0x1513 /* Tbt 1 Gen 1 */
#define PCI_DEVICE_ID_INTEL_EAGLE_RIDGE 0x151a
#define PCI_DEVICE_ID_INTEL_LIGHT_PEAK 0x151b
#define PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C 0x1547 /* Tbt 1 Gen 2 */
#define PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_2C 0x1548
#define PCI_DEVICE_ID_INTEL_PORT_RIDGE 0x1549
#define PCI_DEVICE_ID_INTEL_REDWOOD_RIDGE_2C_NHI 0x1566 /* Tbt 1 Gen 3 */
#define PCI_DEVICE_ID_INTEL_REDWOOD_RIDGE_2C_BRIDGE 0x1567
#define PCI_DEVICE_ID_INTEL_REDWOOD_RIDGE_4C_NHI 0x1568
#define PCI_DEVICE_ID_INTEL_REDWOOD_RIDGE_4C_BRIDGE 0x1569
#define PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI 0x156a /* Thunderbolt 2 */
#define PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE 0x156b
#define PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI 0x156c
#define PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE 0x156d
#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_NHI 0x1575 /* Thunderbolt 3 */
#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_BRIDGE 0x1576
#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_NHI 0x1577
#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_BRIDGE 0x1578
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_80960_RP 0x1960
PCI: Add Intel QuickAssist device IDs Add device IDs for the following Intel QuickAssist devices: DH895XCC, C3XXX and C62X. The defines in this patch are going to be referenced in two independent drivers, qat and vfio-pci. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-07-28 03:43:39 +08:00
#define PCI_DEVICE_ID_INTEL_QAT_C3XXX 0x19e2
#define PCI_DEVICE_ID_INTEL_QAT_C3XXX_VF 0x19e3
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21
#define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30
[I/OAT]: Move PCI_DEVICE_ID_INTEL_IOAT to linux/pci_ids.h Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-24 08:39:49 +08:00
#define PCI_DEVICE_ID_INTEL_IOAT 0x1a38
PCI: update Intel chipset names and defines This patch updates the defines for Intel devices in include/linux/pci_ids.h, referenced in arch/x86/pci/irq.c and drivers/i2c/busses/i2c-i801.c, reflecting approved legal branding, and using fuller code-names for products under development. Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-05 04:27:14 +08:00
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN 0x1c41
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f
x86/PCI: irq and pci_ids patch for Intel Patsburg This patch adds an additional LPC Controller DeviceID for the Intel Patsburg PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-18 03:12:08 +08:00
#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40
#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41
Intel xhci: Add PCI id for Panther Point xHCI host. This adds the PCI ID for the xHCI (USB 3.0) host controller in the Intel Panther Point chipset. It will be used by both the EHCI and xHCI driver in the following patches. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-05-26 01:33:17 +08:00
#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI 0x1e31
Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits) PCI: Don't use dmi_name_in_vendors in quirk PCI: remove unused AER functions PCI/sysfs: move bus cpuaffinity to class dev_attrs PCI: add rescan to /sys/.../pci_bus/.../ PCI: update bridge resources to get more big ranges when allocating space (again) KVM: Use pci_store/load_saved_state() around VM device usage PCI: Add interfaces to store and load the device saved state PCI: Track the size of each saved capability data area PCI/e1000e: Add and use pci_disable_link_state_locked() x86/PCI: derive pcibios_last_bus from ACPI MCFG PCI: add latency tolerance reporting enable/disable support PCI: add OBFF enable/disable support PCI: add ID-based ordering enable/disable support PCI hotplug: acpiphp: assume device is in state D0 after powering on a slot. PCI: Set PCIE maxpayload for card during hotplug insertion PCI/ACPI: Report _OSC control mask returned on failure to get control x86/PCI: irq and pci_ids patch for Intel Panther Point DeviceIDs PCI: handle positive error codes PCI: check pci_vpd_pci22_wait() return PCI: Use ICH6_GPIO_EN in ich6_lpc_acpi_gpio ... Fix up trivial conflicts in include/linux/pci_ids.h: commit a6e5e2be4461 moved the intel SMBUS ID definitons to the i2c-i801.c driver.
2011-05-24 06:39:34 +08:00
#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e40
#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f
PCI: Add Intel VMD devices to pci ids Add the Intel VMD device ids to the pci id database and update the VMD driver. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-19 03:27:58 +08:00
#define PCI_DEVICE_ID_INTEL_VMD_201D 0x201d
PCI/lpc: irq and pci_ids patch for Intel DH89xxCC DeviceIDs This patch adds the LPC Controller DeviceIDs for the Intel DH89xxCC PCH. The code for capturing ranges of LPC Controller DeviceIDs has also been updated. Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-11 05:08:37 +08:00
#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310
#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX 0x231f
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410
#define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411
#define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413
#define PCI_DEVICE_ID_INTEL_82801AA_5 0x2415
#define PCI_DEVICE_ID_INTEL_82801AA_6 0x2416
#define PCI_DEVICE_ID_INTEL_82801AA_8 0x2418
#define PCI_DEVICE_ID_INTEL_82801AB_0 0x2420
#define PCI_DEVICE_ID_INTEL_82801AB_1 0x2421
#define PCI_DEVICE_ID_INTEL_82801AB_3 0x2423
#define PCI_DEVICE_ID_INTEL_82801AB_5 0x2425
#define PCI_DEVICE_ID_INTEL_82801AB_6 0x2426
#define PCI_DEVICE_ID_INTEL_82801AB_8 0x2428
#define PCI_DEVICE_ID_INTEL_82801BA_0 0x2440
#define PCI_DEVICE_ID_INTEL_82801BA_2 0x2443
#define PCI_DEVICE_ID_INTEL_82801BA_4 0x2445
#define PCI_DEVICE_ID_INTEL_82801BA_6 0x2448
#define PCI_DEVICE_ID_INTEL_82801BA_8 0x244a
#define PCI_DEVICE_ID_INTEL_82801BA_9 0x244b
#define PCI_DEVICE_ID_INTEL_82801BA_10 0x244c
#define PCI_DEVICE_ID_INTEL_82801BA_11 0x244e
#define PCI_DEVICE_ID_INTEL_82801E_0 0x2450
#define PCI_DEVICE_ID_INTEL_82801E_11 0x245b
#define PCI_DEVICE_ID_INTEL_82801CA_0 0x2480
#define PCI_DEVICE_ID_INTEL_82801CA_3 0x2483
#define PCI_DEVICE_ID_INTEL_82801CA_5 0x2485
#define PCI_DEVICE_ID_INTEL_82801CA_6 0x2486
#define PCI_DEVICE_ID_INTEL_82801CA_10 0x248a
#define PCI_DEVICE_ID_INTEL_82801CA_11 0x248b
#define PCI_DEVICE_ID_INTEL_82801CA_12 0x248c
#define PCI_DEVICE_ID_INTEL_82801DB_0 0x24c0
#define PCI_DEVICE_ID_INTEL_82801DB_1 0x24c1
PCI: Compaq Evo D510 SMBus quirk using USB instead of VGA On the Compaq Evo D510 SFF/CMT, a PCI quirk activated the SMBus device based on detection of the on-board VGA controller, but the on-board VGA is disabled if an AGP card is inserted, so look for one of the USB controllers instead. Signed-off-by: David O'Shea <dcoshea@hotmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-02 16:51:13 +08:00
#define PCI_DEVICE_ID_INTEL_82801DB_2 0x24c2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82801DB_3 0x24c3
#define PCI_DEVICE_ID_INTEL_82801DB_5 0x24c5
#define PCI_DEVICE_ID_INTEL_82801DB_6 0x24c6
#define PCI_DEVICE_ID_INTEL_82801DB_9 0x24c9
#define PCI_DEVICE_ID_INTEL_82801DB_10 0x24ca
#define PCI_DEVICE_ID_INTEL_82801DB_11 0x24cb
#define PCI_DEVICE_ID_INTEL_82801DB_12 0x24cc
#define PCI_DEVICE_ID_INTEL_82801EB_0 0x24d0
#define PCI_DEVICE_ID_INTEL_82801EB_1 0x24d1
#define PCI_DEVICE_ID_INTEL_82801EB_3 0x24d3
#define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5
#define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6
#define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db
x86: HPET force enable for ICH5 force_enable hpet for ICH5. [ Build fixes from Andrew Morton ] Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-13 05:04:24 +08:00
#define PCI_DEVICE_ID_INTEL_82801EB_12 0x24dc
[PATCH] PCI: restore 2 missing pci ids Somewhere between 2.6.14 and 2.6.15-rc3, some PCI ids were apparently removed. The ecc.c module, which is not a part of the kernel.org tree, but included in some distributions, fails to compile. Signed-off-by: Mark Rustad <mrustad@mac.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-06 14:47:29 +08:00
#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1
#define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2
#define PCI_DEVICE_ID_INTEL_ESB_4 0x25a4
#define PCI_DEVICE_ID_INTEL_ESB_5 0x25a6
#define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab
pci: add PCI IDs for devices that need boot irq quirks Signed-off-by: Stefan Assmann <sassmann@suse.de> Signed-off-by: Olaf Dabrunz <od@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-11 22:35:13 +08:00
#define PCI_DEVICE_ID_INTEL_ESB_10 0x25ac
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82820_HB 0x2500
#define PCI_DEVICE_ID_INTEL_82820_UP_HB 0x2501
#define PCI_DEVICE_ID_INTEL_82850_HB 0x2530
#define PCI_DEVICE_ID_INTEL_82860_HB 0x2531
PCI: Unhide the SMBus on Asus PU-DLS Unhide the SMBus controller on the Asus PU-DLS board. This fixes bug #6763. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-31 14:53:15 +08:00
#define PCI_DEVICE_ID_INTEL_E7501_MCH 0x254c
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82845G_HB 0x2560
#define PCI_DEVICE_ID_INTEL_82845G_IG 0x2562
#define PCI_DEVICE_ID_INTEL_82865_HB 0x2570
#define PCI_DEVICE_ID_INTEL_82865_IG 0x2572
#define PCI_DEVICE_ID_INTEL_82875_HB 0x2578
#define PCI_DEVICE_ID_INTEL_82915G_HB 0x2580
#define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582
#define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590
#define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592
hwmon: (i5k_amb) New memory temperature sensor driver New driver to read FB-DIMM temperature sensors on systems with the Intel 5000 series chipsets. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-19 04:22:43 +08:00
#define PCI_DEVICE_ID_INTEL_5000_ERR 0x25F0
#define PCI_DEVICE_ID_INTEL_5000_FBD0 0x25F5
#define PCI_DEVICE_ID_INTEL_5000_FBD1 0x25F6
[PATCH] i945G patch for agpgart Attached is a small patch for i945G support against 2.6.11.11. From: Alan Hourihane <alanh@fairlite.demon.co.uk> Signed-off-by: Dave Jones <davej@redhat.com>
2005-06-01 02:50:49 +08:00
#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770
#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772
drivers/edac: new inte 30x0 MC driver Here's a driver for the Intel 3000 and 3010 memory controllers, relative to today's Sourceforge code drop. This has only had light testing (I've yet to actually see it handle a memory error) but it detects my hardware correctly. Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:49:48 +08:00
#define PCI_DEVICE_ID_INTEL_3000_HB 0x2778
[AGPGART] 945GM support for agpgart Here's a very small diff for 945GM support for agpgart. Patch against 2.6.15. From: Alan Hourihane <alanh@fairlite.demon.co.uk> Signed-off-by: Dave Jones <davej@redhat.com>
2006-01-19 22:08:40 +08:00
#define PCI_DEVICE_ID_INTEL_82945GM_HB 0x27A0
#define PCI_DEVICE_ID_INTEL_82945GM_IG 0x27A2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640
#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641
#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642
#define PCI_DEVICE_ID_INTEL_ICH6_16 0x266a
#define PCI_DEVICE_ID_INTEL_ICH6_17 0x266d
#define PCI_DEVICE_ID_INTEL_ICH6_18 0x266e
#define PCI_DEVICE_ID_INTEL_ICH6_19 0x266f
[PATCH] irq and pci_ids: patch for Intel ESB2 This patch adds the Intel ESB2 DID's to the irq.c and pci_ids.h files. Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:24:41 +08:00
#define PCI_DEVICE_ID_INTEL_ESB2_0 0x2670
#define PCI_DEVICE_ID_INTEL_ESB2_14 0x2698
#define PCI_DEVICE_ID_INTEL_ESB2_17 0x269b
#define PCI_DEVICE_ID_INTEL_ESB2_18 0x269e
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_ICH7_0 0x27b8
#define PCI_DEVICE_ID_INTEL_ICH7_1 0x27b9
[PATCH] irq and pci_ids for Intel ICH7DH & ICH7-M DH This patch adds the Intel ICH7DH and ICH7-M DH DID's to the irq.c and pci_ids.h files. Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 23:58:50 +08:00
#define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0
PCI: irq and pci_ids patch for Intel Tigerpoint DeviceIDs This patch adds the Intel Tigerpoint LPC Controller DeviceIDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-24 04:43:38 +08:00
#define PCI_DEVICE_ID_INTEL_TGP_LPC 0x27bc
[PATCH] irq and pci_ids for Intel ICH7DH & ICH7-M DH This patch adds the Intel ICH7DH and ICH7-M DH DID's to the irq.c and pci_ids.h files. Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 23:58:50 +08:00
#define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da
#define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd
#define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de
#define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df
[PATCH] PCI: irq and pci_ids: patch for Intel ICH8 This patch adds the Intel ICH8 DID's to the irq.c and pci_ids.h files. Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-10 02:53:45 +08:00
#define PCI_DEVICE_ID_INTEL_ICH8_0 0x2810
#define PCI_DEVICE_ID_INTEL_ICH8_1 0x2811
#define PCI_DEVICE_ID_INTEL_ICH8_2 0x2812
#define PCI_DEVICE_ID_INTEL_ICH8_3 0x2814
#define PCI_DEVICE_ID_INTEL_ICH8_4 0x2815
#define PCI_DEVICE_ID_INTEL_ICH8_5 0x283e
#define PCI_DEVICE_ID_INTEL_ICH8_6 0x2850
PCI: Add Intel VMD devices to pci ids Add the Intel VMD device ids to the pci id database and update the VMD driver. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-19 03:27:58 +08:00
#define PCI_DEVICE_ID_INTEL_VMD_28C0 0x28c0
PCI: irq: irq and pci_ids patch for Intel ICH9 This updated patch adds the Intel ICH9 LPC and SMBus Controller DID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-23 07:15:08 +08:00
#define PCI_DEVICE_ID_INTEL_ICH9_0 0x2910
pci_ids: update patch for Intel ICH9M This patch updates the Intel ICH9M LPC Controller DID's, due to a specification change. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Cc: <stable@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 15:46:38 +08:00
#define PCI_DEVICE_ID_INTEL_ICH9_1 0x2917
PCI: irq: irq and pci_ids patch for Intel ICH9 This updated patch adds the Intel ICH9 LPC and SMBus Controller DID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-23 07:15:08 +08:00
#define PCI_DEVICE_ID_INTEL_ICH9_2 0x2912
#define PCI_DEVICE_ID_INTEL_ICH9_3 0x2913
#define PCI_DEVICE_ID_INTEL_ICH9_4 0x2914
pci_ids: update patch for Intel ICH9M This patch updates the Intel ICH9M LPC Controller DID's, due to a specification change. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Cc: <stable@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 15:46:38 +08:00
#define PCI_DEVICE_ID_INTEL_ICH9_5 0x2919
PCI: irq: irq and pci_ids patch for Intel ICH9 This updated patch adds the Intel ICH9 LPC and SMBus Controller DID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-23 07:15:08 +08:00
#define PCI_DEVICE_ID_INTEL_ICH9_6 0x2930
ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9 It is important that these resources be reserved to avoid conflicts with well known ACPI registers. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-11 13:24:55 +08:00
#define PCI_DEVICE_ID_INTEL_ICH9_7 0x2916
#define PCI_DEVICE_ID_INTEL_ICH9_8 0x2918
i7core_edac: Add an EDAC memory controller driver for Nehalem chipsets This driver is meant to support i7 core/i7core extreme desktop processors and Xeon 35xx/55xx series with integrated memory controller. It is likely that it can be expanded in the future to work with other processor series based at the same Memory Controller design. For now, it has just a few MCH status reads. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 09:41:15 +08:00
#define PCI_DEVICE_ID_INTEL_I7_MCR 0x2c18
#define PCI_DEVICE_ID_INTEL_I7_MC_TAD 0x2c19
#define PCI_DEVICE_ID_INTEL_I7_MC_RAS 0x2c1a
#define PCI_DEVICE_ID_INTEL_I7_MC_TEST 0x2c1c
#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL 0x2c20
#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR 0x2c21
#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK 0x2c22
#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC 0x2c23
#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL 0x2c28
#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR 0x2c29
#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK 0x2c2a
#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC 0x2c2b
#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL 0x2c30
#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR 0x2c31
#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK 0x2c32
#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC 0x2c33
i7core_edac: PCI device is called NONCORE, instead of NOCORE Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-10-14 17:07:07 +08:00
#define PCI_DEVICE_ID_INTEL_I7_NONCORE 0x2c41
#define PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT 0x2c40
i7core_edac: Add initial support for Lynnfield Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-10-14 22:21:58 +08:00
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE 0x2c50
i7core: add support for Lynnfield alternate address Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-10-15 00:31:06 +08:00
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT 0x2c51
i7core_edac: Add support for X5670 As reported by Vernon Mauery <vernux@us.ibm.com>, X5670 (Westmere-EP) uses a different register for one of the uncore PCI devices. Add support for it. Those are the PCI ID's on this new chipset: fe:00.0 0600: 8086:2c70 (rev 02) fe:00.1 0600: 8086:2d81 (rev 02) fe:02.0 0600: 8086:2d90 (rev 02) fe:02.1 0600: 8086:2d91 (rev 02) fe:02.2 0600: 8086:2d92 (rev 02) fe:02.3 0600: 8086:2d93 (rev 02) fe:02.4 0600: 8086:2d94 (rev 02) fe:02.5 0600: 8086:2d95 (rev 02) fe:03.0 0600: 8086:2d98 (rev 02) fe:03.1 0600: 8086:2d99 (rev 02) fe:03.2 0600: 8086:2d9a (rev 02) fe:03.4 0600: 8086:2d9c (rev 02) fe:04.0 0600: 8086:2da0 (rev 02) fe:04.1 0600: 8086:2da1 (rev 02) fe:04.2 0600: 8086:2da2 (rev 02) fe:04.3 0600: 8086:2da3 (rev 02) fe:05.0 0600: 8086:2da8 (rev 02) fe:05.1 0600: 8086:2da9 (rev 02) fe:05.2 0600: 8086:2daa (rev 02) fe:05.3 0600: 8086:2dab (rev 02) fe:06.0 0600: 8086:2db0 (rev 02) fe:06.1 0600: 8086:2db1 (rev 02) fe:06.2 0600: 8086:2db2 (rev 02) fe:06.3 0600: 8086:2db3 (rev 02) (as usual, the same PCI devices repeat at ff: bus) The PCI device 8086:2c70 is shown as: fe:00.0 Host bridge: Intel Corporation QuickPath Architecture Generic Non-core Registers (rev 02) So, for this device to be recognized, it is only a matter of adding this new PCI ID to the driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 00:00:31 +08:00
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2 0x2c70
i7core_edac: Add initial support for Lynnfield Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-10-14 22:21:58 +08:00
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_SAD 0x2c81
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0 0x2c90
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_PHY0 0x2c91
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR 0x2c98
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD 0x2c99
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST 0x2c9C
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL 0x2ca0
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR 0x2ca1
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK 0x2ca2
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC 0x2ca3
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL 0x2ca8
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR 0x2ca9
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK 0x2caa
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC 0x2cab
Add support for Westmere to i7core_edac driver This adds new PCI IDs for the Westmere's memory controller devices and modifies the i7core_edac driver to be able to probe both Nehalem and Westmere processors. Signed-off-by: Vernon Mauery <vernux@us.ibm.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 06:02:50 +08:00
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2 0x2d98
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2 0x2d99
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2 0x2d9a
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2 0x2d9c
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2 0x2da0
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2 0x2da1
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2 0x2da2
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2 0x2da3
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2 0x2da8
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2 0x2da9
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2 0x2daa
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2 0x2dab
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2 0x2db0
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2 0x2db1
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2 0x2db2
#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2 0x2db3
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340
I/OAT: I/OAT version 3.0 support This patch adds to ioatdma and dca modules support for Intel I/OAT DMA engine ver.3 (aka CB3 device). The main features of I/OAT ver.3 are: * 8 single channel DMA devices (8 channels total) * 8 DCA providers, each can accept 2 requesters * 8-bit TAG values and 32-bit extended APIC IDs Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-23 08:30:57 +08:00
#define PCI_DEVICE_ID_INTEL_IOAT_TBG4 0x3429
#define PCI_DEVICE_ID_INTEL_IOAT_TBG5 0x342a
#define PCI_DEVICE_ID_INTEL_IOAT_TBG6 0x342b
#define PCI_DEVICE_ID_INTEL_IOAT_TBG7 0x342c
i7core_edac: Add a code to probe Xeon 55xx bus This code changes the detection procedure of i7core_edac. Instead of directly probing for MC registers, it probes for another register found on Nehalem. If found, it tries to pick the first MC PCI BUS. This should work fine with Xeon 35xx, but, on Xeon 55xx, this is at bus 254 and 255 that are not properly detected by the non-legacy PCI methods. The new detection code scans specifically at buses 254 and 255 for the Xeon 55xx devices. This code has not tested yet. After working, a change at the code will be needed, since the i7core is not yet ready for working with 2 sets of MC. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-11 05:39:53 +08:00
#define PCI_DEVICE_ID_INTEL_X58_HUB_MGMT 0x342e
I/OAT: I/OAT version 3.0 support This patch adds to ioatdma and dca modules support for Intel I/OAT DMA engine ver.3 (aka CB3 device). The main features of I/OAT ver.3 are: * 8 single channel DMA devices (8 channels total) * 8 DCA providers, each can accept 2 requesters * 8-bit TAG values and 32-bit extended APIC IDs Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-23 08:30:57 +08:00
#define PCI_DEVICE_ID_INTEL_IOAT_TBG0 0x3430
#define PCI_DEVICE_ID_INTEL_IOAT_TBG1 0x3431
#define PCI_DEVICE_ID_INTEL_IOAT_TBG2 0x3432
#define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575
#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577
intelfb: support i854 Support the Intel 854 Chipset in fbdev. We test and use the patch on a Thomson IP1101 IPTV-Box. On the VGA-Port we get a normal signal. Here is the link to the Mambux-Project: http://www.mambux.de Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Stefan Husemann <shusemann@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-14 05:40:10 +08:00
#define PCI_DEVICE_ID_INTEL_82854_HB 0x358c
#define PCI_DEVICE_ID_INTEL_82854_IG 0x358e
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580
#define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582
#define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590
#define PCI_DEVICE_ID_INTEL_E7320_MCH 0x3592
#define PCI_DEVICE_ID_INTEL_MCH_PA 0x3595
#define PCI_DEVICE_ID_INTEL_MCH_PA1 0x3596
#define PCI_DEVICE_ID_INTEL_MCH_PB 0x3597
#define PCI_DEVICE_ID_INTEL_MCH_PB1 0x3598
#define PCI_DEVICE_ID_INTEL_MCH_PC 0x3599
#define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a
#define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e
i7300_edac: start a driver for i7300 chipset (Clarksboro) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-25 10:22:57 +08:00
#define PCI_DEVICE_ID_INTEL_I7300_MCH_ERR 0x360c
#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB0 0x360f
#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB1 0x3610
I/OAT: New device ids Add device ids for new revs of the Intel I/OAT DMA engine Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 16:27:37 +08:00
#define PCI_DEVICE_ID_INTEL_IOAT_CNB 0x360b
i7300_idle driver v1.55 The Intel 7300 Memory Controller supports dynamic throttling of memory which can be used to save power when system is idle. This driver does the memory throttling when all CPUs are idle on such a system. Refer to "Intel 7300 Memory Controller Hub (MCH)" datasheet for the config space description. Signed-off-by: Andy Henroid <andrew.d.henroid@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
2008-10-10 02:45:22 +08:00
#define PCI_DEVICE_ID_INTEL_FBD_CNB 0x360c
ioat3: ioat3.2 pci ids for Jasper Forest Jasper Forest introduces raid offload support via ioat3.2 support. When raid offload is enabled two (out of 8 channels) will report raid5/raid6 offload capabilities. The remaining channels will only report ioat3.0 capabilities (memcpy). Signed-off-by: Tom Picard <tom.s.picard@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-09 08:43:01 +08:00
#define PCI_DEVICE_ID_INTEL_IOAT_JSF0 0x3710
#define PCI_DEVICE_ID_INTEL_IOAT_JSF1 0x3711
#define PCI_DEVICE_ID_INTEL_IOAT_JSF2 0x3712
#define PCI_DEVICE_ID_INTEL_IOAT_JSF3 0x3713
#define PCI_DEVICE_ID_INTEL_IOAT_JSF4 0x3714
#define PCI_DEVICE_ID_INTEL_IOAT_JSF5 0x3715
#define PCI_DEVICE_ID_INTEL_IOAT_JSF6 0x3716
#define PCI_DEVICE_ID_INTEL_IOAT_JSF7 0x3717
#define PCI_DEVICE_ID_INTEL_IOAT_JSF8 0x3718
#define PCI_DEVICE_ID_INTEL_IOAT_JSF9 0x3719
PCI: Add Intel QuickAssist device IDs Add device IDs for the following Intel QuickAssist devices: DH895XCC, C3XXX and C62X. The defines in this patch are going to be referenced in two independent drivers, qat and vfio-pci. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-07-28 03:43:39 +08:00
#define PCI_DEVICE_ID_INTEL_QAT_C62X 0x37c8
#define PCI_DEVICE_ID_INTEL_QAT_C62X_VF 0x37c9
PCI: pci_ids: patch for Intel ICH10 DeviceID's This patch adds the Intel ICH10 LPC and SMBus Controller DeviceID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-29 09:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_ICH10_0 0x3a14
#define PCI_DEVICE_ID_INTEL_ICH10_1 0x3a16
#define PCI_DEVICE_ID_INTEL_ICH10_2 0x3a18
#define PCI_DEVICE_ID_INTEL_ICH10_3 0x3a1a
#define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30
#define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60
PCI: update Intel chipset names and defines This patch updates the defines for Intel devices in include/linux/pci_ids.h, referenced in arch/x86/pci/irq.c and drivers/i2c/busses/i2c-i801.c, reflecting approved legal branding, and using fuller code-names for products under development. Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-05 04:27:14 +08:00
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN 0x3b00
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX 0x3b1f
ioat: Adding PCI IDs for IOAT devices on SandyBridge platforms Adding to pci_id.h and the device table for ioat. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-23 05:04:56 +08:00
#define PCI_DEVICE_ID_INTEL_IOAT_SNB0 0x3c20
#define PCI_DEVICE_ID_INTEL_IOAT_SNB1 0x3c21
#define PCI_DEVICE_ID_INTEL_IOAT_SNB2 0x3c22
#define PCI_DEVICE_ID_INTEL_IOAT_SNB3 0x3c23
#define PCI_DEVICE_ID_INTEL_IOAT_SNB4 0x3c24
#define PCI_DEVICE_ID_INTEL_IOAT_SNB5 0x3c25
#define PCI_DEVICE_ID_INTEL_IOAT_SNB6 0x3c26
#define PCI_DEVICE_ID_INTEL_IOAT_SNB7 0x3c27
#define PCI_DEVICE_ID_INTEL_IOAT_SNB8 0x3c2e
#define PCI_DEVICE_ID_INTEL_IOAT_SNB9 0x3c2f
perf/x86: Add Intel Nehalem and Sandy Bridge-EP uncore support The uncore subsystem in Sandy Bridge-EP consists of 8 components: Ubox, Cacheing Agent, Home Agent, Memory controller, Power Control, QPI Link Layer, R2PCIe, R3QPI. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1339741902-8449-9-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-15 14:31:37 +08:00
#define PCI_DEVICE_ID_INTEL_UNC_HA 0x3c46
#define PCI_DEVICE_ID_INTEL_UNC_IMC0 0x3cb0
#define PCI_DEVICE_ID_INTEL_UNC_IMC1 0x3cb1
#define PCI_DEVICE_ID_INTEL_UNC_IMC2 0x3cb4
#define PCI_DEVICE_ID_INTEL_UNC_IMC3 0x3cb5
#define PCI_DEVICE_ID_INTEL_UNC_QPI0 0x3c41
#define PCI_DEVICE_ID_INTEL_UNC_QPI1 0x3c42
#define PCI_DEVICE_ID_INTEL_UNC_R2PCIE 0x3c43
#define PCI_DEVICE_ID_INTEL_UNC_R3QPI0 0x3c44
#define PCI_DEVICE_ID_INTEL_UNC_R3QPI1 0x3c45
Move Intel SNB device ids from sb_edac to pci_ids.h The i2c_imc driver will use two of them, and moving only part of the list seems messier. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-08-15 05:45:40 +08:00
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS 0x3c71 /* 15.1 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR0 0x3c72 /* 16.2 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR1 0x3c73 /* 16.3 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR2 0x3c76 /* 16.6 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR3 0x3c77 /* 16.7 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0 0x3ca0 /* 14.0 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA 0x3ca8 /* 15.0 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0 0x3caa /* 15.2 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1 0x3cab /* 15.3 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2 0x3cac /* 15.4 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3 0x3cad /* 15.5 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO 0x3cb8 /* 17.0 */
perf/x86: Add Intel Nehalem and Sandy Bridge-EP uncore support The uncore subsystem in Sandy Bridge-EP consists of 8 components: Ubox, Cacheing Agent, Home Agent, Memory controller, Power Control, QPI Link Layer, R2PCIe, R3QPI. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1339741902-8449-9-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-15 14:31:37 +08:00
#define PCI_DEVICE_ID_INTEL_JAKETOWN_UBOX 0x3ce0
Move Intel SNB device ids from sb_edac to pci_ids.h The i2c_imc driver will use two of them, and moving only part of the list seems messier. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-08-15 05:45:40 +08:00
#define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0 0x3cf4 /* 12.6 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_BR 0x3cf5 /* 13.6 */
#define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1 0x3cf6 /* 12.7 */
I/OAT: Add support for version 2 of ioatdma device Add support for version 2 of the ioatdma device. This device handles the descriptor chain and DCA services slightly differently: - Instead of moving the dma descriptors between a busy and an idle chain, this new version uses a single circular chain so that we don't have rewrite the next_descriptor pointers as we add new requests, and the device doesn't need to re-read the last descriptor. - The new device has the DCA tags defined internally instead of needing them defined statically. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Cc: "Williams, Dan J" <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-15 08:59:51 +08:00
#define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
#define PCI_DEVICE_ID_INTEL_5100_16 0x65f0
i5100_edac: probe for device 19 function 0 Probe and store the device handle for the device 19 function 0 during driver initialization. The device is used during fault injection. Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-08 23:30:56 +08:00
#define PCI_DEVICE_ID_INTEL_5100_19 0x65f3
edac: i5100 new intel chipset driver Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:49:04 +08:00
#define PCI_DEVICE_ID_INTEL_5100_21 0x65f5
#define PCI_DEVICE_ID_INTEL_5100_22 0x65f6
i5k_amb: support Intel 5400 chipset Minor rework to support the Intel 5400 chipset. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 04:04:25 +08:00
#define PCI_DEVICE_ID_INTEL_5400_ERR 0x4030
#define PCI_DEVICE_ID_INTEL_5400_FBD0 0x4035
#define PCI_DEVICE_ID_INTEL_5400_FBD1 0x4036
I/OAT: New device ids Add device ids for new revs of the Intel I/OAT DMA engine Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 16:27:37 +08:00
#define PCI_DEVICE_ID_INTEL_IOAT_SCNB 0x65ff
PCI: update Intel chipset names and defines This patch updates the defines for Intel devices in include/linux/pci_ids.h, referenced in arch/x86/pci/irq.c and drivers/i2c/busses/i2c-i801.c, reflecting approved legal branding, and using fuller code-names for products under development. Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-05 04:27:14 +08:00
#define PCI_DEVICE_ID_INTEL_EP80579_0 0x5031
#define PCI_DEVICE_ID_INTEL_EP80579_1 0x5032
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000
#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010
#define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020
#define PCI_DEVICE_ID_INTEL_82437VX 0x7030
#define PCI_DEVICE_ID_INTEL_82439TX 0x7100
#define PCI_DEVICE_ID_INTEL_82371AB_0 0x7110
#define PCI_DEVICE_ID_INTEL_82371AB 0x7111
#define PCI_DEVICE_ID_INTEL_82371AB_2 0x7112
#define PCI_DEVICE_ID_INTEL_82371AB_3 0x7113
#define PCI_DEVICE_ID_INTEL_82810_MC1 0x7120
#define PCI_DEVICE_ID_INTEL_82810_IG1 0x7121
#define PCI_DEVICE_ID_INTEL_82810_MC3 0x7122
#define PCI_DEVICE_ID_INTEL_82810_IG3 0x7123
#define PCI_DEVICE_ID_INTEL_82810E_MC 0x7124
#define PCI_DEVICE_ID_INTEL_82810E_IG 0x7125
#define PCI_DEVICE_ID_INTEL_82443LX_0 0x7180
#define PCI_DEVICE_ID_INTEL_82443LX_1 0x7181
#define PCI_DEVICE_ID_INTEL_82443BX_0 0x7190
#define PCI_DEVICE_ID_INTEL_82443BX_1 0x7191
#define PCI_DEVICE_ID_INTEL_82443BX_2 0x7192
#define PCI_DEVICE_ID_INTEL_440MX 0x7195
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_DEVICE_ID_INTEL_440MX_6 0x7196
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82443MX_0 0x7198
#define PCI_DEVICE_ID_INTEL_82443MX_1 0x7199
#define PCI_DEVICE_ID_INTEL_82443MX_3 0x719b
#define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0
#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2
#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601
PCI: Add Intel SCH PCI IDs This patch adds Intel SCH chipsets (US15W, US15L, UL11L) PCI IDs, these IDs will be used by following SCH driver patches. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Jesse Barnes <jbarnes@jbarnes-t61.(none)>
2008-04-24 09:19:44 +08:00
#define PCI_DEVICE_ID_INTEL_SCH_LPC 0x8119
#define PCI_DEVICE_ID_INTEL_SCH_IDE 0x811a
x86: HPET force enable for e6xx based systems As the Soekris net6501 and other e6xx based systems do not have any ACPI implementation, HPET won't get enabled. This patch enables HPET on such platforms. [ 0.430149] pci 0000:00:01.0: Force enabled HPET at 0xfed00000 [ 0.644838] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Original patch by Peter Neubauer (http://www.mail-archive.com/soekris-tech@lists.soekris.com/msg06462.html) slightly modified by Conrad Kostecki <ck@conrad-kostecki.de> and massaged accoring to Thomas Gleixners <tglx@linutronix.de> by me. Suggested-by: Conrad Kostecki <ck@conrad-kostecki.de> Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de> Cc: Peter Neubauer <pneubauer@bluerwhite.org> Link: http://lkml.kernel.org/r/5412D3A5.2030909@lsexperts.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-09-12 19:06:13 +08:00
#define PCI_DEVICE_ID_INTEL_E6XX_CU 0x8183
pci_ids: Add Intel Tunnel Creek LPC Bridge device ID. Signed-off-by: Denis Turischev <denis@compulab.co.il> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-13 23:26:40 +08:00
#define PCI_DEVICE_ID_INTEL_ITC_LPC 0x8186
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4
[PATCH] PCI: restore 2 missing pci ids Somewhere between 2.6.14 and 2.6.15-rc3, some PCI ids were apparently removed. The ecc.c module, which is not a part of the kernel.org tree, but included in some distributions, fails to compile. Signed-off-by: Mark Rustad <mrustad@mac.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-06 14:47:29 +08:00
#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca
#define PCI_DEVICE_ID_INTEL_82454NX 0x84cb
#define PCI_DEVICE_ID_INTEL_84460GX 0x84ea
#define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500
#define PCI_DEVICE_ID_INTEL_IXP2800 0x9004
PCI: vmd: Add device id for VMD device 8086:9A0B This patch adds support for this VMD device which supports the bus restriction mode. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-11-12 20:47:53 +08:00
#define PCI_DEVICE_ID_INTEL_VMD_9A0B 0x9a0b
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_INTEL_S21152BB 0xb152
[PATCH] x86_64: Inclusion of ScaleMP vSMP architecture patches - vsmp_arch Introduce vSMP arch to the kernel. This patch: 1. Adds CONFIG_X86_VSMP 2. Adds machine specific macros for local_irq_disabled, local_irq_enabled and irqs_disabled 3. Writes to the vSMP CTL device to indicate kernel compiled with CONFIG_VSMP Signed-off-by: Ravikiran Thirumalai <kiran@scalemp.com> Signed-off-by: Shai Fultheim <shai@scalemp.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 05:46:18 +08:00
#define PCI_VENDOR_ID_SCALEMP 0x8686
#define PCI_DEVICE_ID_SCALEMP_VSMP_CTL 0x1010
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_COMPUTONE 0x8e0e
#define PCI_DEVICE_ID_COMPUTONE_PG 0x0302
#define PCI_SUBVENDOR_ID_COMPUTONE 0x8e0e
#define PCI_SUBDEVICE_ID_COMPUTONE_PG4 0x0001
#define PCI_SUBDEVICE_ID_COMPUTONE_PG8 0x0002
#define PCI_SUBDEVICE_ID_COMPUTONE_PG6 0x0003
#define PCI_VENDOR_ID_KTI 0x8e2e
#define PCI_VENDOR_ID_ADAPTEC 0x9004
#define PCI_DEVICE_ID_ADAPTEC_7810 0x1078
#define PCI_DEVICE_ID_ADAPTEC_7821 0x2178
#define PCI_DEVICE_ID_ADAPTEC_38602 0x3860
#define PCI_DEVICE_ID_ADAPTEC_7850 0x5078
#define PCI_DEVICE_ID_ADAPTEC_7855 0x5578
#define PCI_DEVICE_ID_ADAPTEC_3860 0x6038
#define PCI_DEVICE_ID_ADAPTEC_1480A 0x6075
#define PCI_DEVICE_ID_ADAPTEC_7860 0x6078
#define PCI_DEVICE_ID_ADAPTEC_7861 0x6178
#define PCI_DEVICE_ID_ADAPTEC_7870 0x7078
#define PCI_DEVICE_ID_ADAPTEC_7871 0x7178
#define PCI_DEVICE_ID_ADAPTEC_7872 0x7278
#define PCI_DEVICE_ID_ADAPTEC_7873 0x7378
#define PCI_DEVICE_ID_ADAPTEC_7874 0x7478
#define PCI_DEVICE_ID_ADAPTEC_7895 0x7895
#define PCI_DEVICE_ID_ADAPTEC_7880 0x8078
#define PCI_DEVICE_ID_ADAPTEC_7881 0x8178
#define PCI_DEVICE_ID_ADAPTEC_7882 0x8278
#define PCI_DEVICE_ID_ADAPTEC_7883 0x8378
#define PCI_DEVICE_ID_ADAPTEC_7884 0x8478
#define PCI_DEVICE_ID_ADAPTEC_7885 0x8578
#define PCI_DEVICE_ID_ADAPTEC_7886 0x8678
#define PCI_DEVICE_ID_ADAPTEC_7887 0x8778
#define PCI_DEVICE_ID_ADAPTEC_7888 0x8878
#define PCI_VENDOR_ID_ADAPTEC2 0x9005
#define PCI_DEVICE_ID_ADAPTEC2_2940U2 0x0010
#define PCI_DEVICE_ID_ADAPTEC2_2930U2 0x0011
#define PCI_DEVICE_ID_ADAPTEC2_7890B 0x0013
#define PCI_DEVICE_ID_ADAPTEC2_7890 0x001f
#define PCI_DEVICE_ID_ADAPTEC2_3940U2 0x0050
#define PCI_DEVICE_ID_ADAPTEC2_3950U2D 0x0051
#define PCI_DEVICE_ID_ADAPTEC2_7896 0x005f
#define PCI_DEVICE_ID_ADAPTEC2_7892A 0x0080
#define PCI_DEVICE_ID_ADAPTEC2_7892B 0x0081
#define PCI_DEVICE_ID_ADAPTEC2_7892D 0x0083
#define PCI_DEVICE_ID_ADAPTEC2_7892P 0x008f
#define PCI_DEVICE_ID_ADAPTEC2_7899A 0x00c0
#define PCI_DEVICE_ID_ADAPTEC2_7899B 0x00c1
#define PCI_DEVICE_ID_ADAPTEC2_7899D 0x00c3
#define PCI_DEVICE_ID_ADAPTEC2_7899P 0x00cf
[SCSI] pci: PCI ids for new ipr adapters Adds some new PCI IDs for new IPR adapters. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-02 07:02:36 +08:00
#define PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN 0x0500
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_DEVICE_ID_ADAPTEC2_SCAMP 0x0503
#define PCI_VENDOR_ID_HOLTEK 0x9412
#define PCI_DEVICE_ID_HOLTEK_6565 0x6565
#define PCI_VENDOR_ID_NETMOS 0x9710
#define PCI_DEVICE_ID_NETMOS_9705 0x9705
#define PCI_DEVICE_ID_NETMOS_9715 0x9715
#define PCI_DEVICE_ID_NETMOS_9735 0x9735
#define PCI_DEVICE_ID_NETMOS_9745 0x9745
#define PCI_DEVICE_ID_NETMOS_9755 0x9755
#define PCI_DEVICE_ID_NETMOS_9805 0x9805
#define PCI_DEVICE_ID_NETMOS_9815 0x9815
#define PCI_DEVICE_ID_NETMOS_9835 0x9835
#define PCI_DEVICE_ID_NETMOS_9845 0x9845
#define PCI_DEVICE_ID_NETMOS_9855 0x9855
serial: 8250_pci: add support for MCS9865 / SYBA 6x Serial Port Card This patch is heavily based on an earlier patch found on the linux-serial mailing list [1], written by Darius Augulis. The previous incarnation of this patch only supported a 2x serial port card. I have added support for my SYBA 6x serial port card, and tested on x86. [1]: http://marc.info/?l=linux-serial&m=124975806304760 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-22 08:26:45 +08:00
#define PCI_DEVICE_ID_NETMOS_9865 0x9865
Basic support for Moschip 9900 family I/O chips Add I/O based support for serial and parallel ports of the following chips: Vendor: Moschip (0x9710) Parts (device IDs) * 9900 (0x9900) * 9904 (0x9904 * 9901 (0x9912, also sold as 9912) * 9922 (0x9922) On all chips but the 9900, a single port is provided per PCI subdevice (subvendor-ID 0xA000, subdevice-IDs 0x1000 for serial, 0x2000 for parallel with proper class codes). In cascading configurations, the 9900 provides two devices per subdevice, with subvendor-ID 0xA000 and subdevice-IDs 0x30ps where p is the number of parallel ports and s the number of serial ports. Basic testing was only done on the serial part of a 9912 to the point where it can be used for a serial kernel console, and advanced features are completely untested. It is possible to reduce functionality of the chips by adding a configuration EEPROM, and the datasheet [1] is inconsistent w.r.t subdevices in the 4s+2s1p and 2s1p+4s configurations. The subdevice-ID 0x3012 should likely read 0x3011 with a serial port in function 3, which would be consistent with the BAR layouts. For now, the drivers ignore subdevices with ID 0x1000 and no class code. The parallel ports are integrated in parport_serial even for purely parallel parts to reduce the footprint of the patch. [1] http://www.moschip.com/data/products/MCS9900/MCS9900_Datasheet.pdf Signed-off-by: Nicos Gollan <gtdev@spearhead.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 03:00:37 +08:00
#define PCI_DEVICE_ID_NETMOS_9900 0x9900
parport/serial: add support for NetMos 9901 Multi-IO card Add support for the PCI-Express NetMos 9901 Multi-IO card. 0001:06:00.0 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 65 Region 0: I/O ports at 0030 [size=8] Region 1: Memory at 80105000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80104000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.1 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 65 Region 0: I/O ports at 0020 [size=8] Region 1: Memory at 80103000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80102000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9901] (prog-if 03 [IEEE1284]) Subsystem: Device [a000:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 65 Region 0: I/O ports at 0010 [size=8] Region 1: I/O ports at <unassigned> Region 2: Memory at 80101000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: parport_pc Kernel modules: parport_pc [ 16.760181] PCI parallel port detected: 416c:0100, I/O at 0x812010(0x0), IRQ 65 [ 16.760225] parport0: PC-style at 0x812010, irq 65 [PCSPP,TRISTATE,EPP] [ 16.851842] serial 0001:06:00.0: enabling device (0004 -> 0007) [ 16.883776] 0001:06:00.0: ttyS0 at I/O 0x812030 (irq = 65) is a ST16650V2 [ 16.893832] serial 0001:06:00.1: enabling device (0004 -> 0007) [ 16.926537] 0001:06:00.1: ttyS1 at I/O 0x812020 (irq = 65) is a ST16650V2 Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-01 02:41:21 +08:00
#define PCI_DEVICE_ID_NETMOS_9901 0x9901
Basic support for Moschip 9900 family I/O chips Add I/O based support for serial and parallel ports of the following chips: Vendor: Moschip (0x9710) Parts (device IDs) * 9900 (0x9900) * 9904 (0x9904 * 9901 (0x9912, also sold as 9912) * 9922 (0x9922) On all chips but the 9900, a single port is provided per PCI subdevice (subvendor-ID 0xA000, subdevice-IDs 0x1000 for serial, 0x2000 for parallel with proper class codes). In cascading configurations, the 9900 provides two devices per subdevice, with subvendor-ID 0xA000 and subdevice-IDs 0x30ps where p is the number of parallel ports and s the number of serial ports. Basic testing was only done on the serial part of a 9912 to the point where it can be used for a serial kernel console, and advanced features are completely untested. It is possible to reduce functionality of the chips by adding a configuration EEPROM, and the datasheet [1] is inconsistent w.r.t subdevices in the 4s+2s1p and 2s1p+4s configurations. The subdevice-ID 0x3012 should likely read 0x3011 with a serial port in function 3, which would be consistent with the BAR layouts. For now, the drivers ignore subdevices with ID 0x1000 and no class code. The parallel ports are integrated in parport_serial even for purely parallel parts to reduce the footprint of the patch. [1] http://www.moschip.com/data/products/MCS9900/MCS9900_Datasheet.pdf Signed-off-by: Nicos Gollan <gtdev@spearhead.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 03:00:37 +08:00
#define PCI_DEVICE_ID_NETMOS_9904 0x9904
#define PCI_DEVICE_ID_NETMOS_9912 0x9912
#define PCI_DEVICE_ID_NETMOS_9922 0x9922
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PCI: pci_ids, add atheros and 3com_2 vendors pci_ids, add atheros and 3com_2 vendors Atheros is wifi vendor. 3com_2 (0xa727) is an vendor id for one card with ath chip. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-18 16:58:14 +08:00
#define PCI_VENDOR_ID_3COM_2 0xa727
Add mISDN HFC multiport driver Enable support for cards with Cologne Chip AG's HFC multiport chip. Signed-off-by: Karsten Keil <kkeil@suse.de>
2008-07-27 08:00:43 +08:00
#define PCI_VENDOR_ID_DIGIUM 0xd161
#define PCI_DEVICE_ID_DIGIUM_HFC4S 0xb410
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_SUBVENDOR_ID_EXSYS 0xd84d
#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014
[SERIAL] support the Exsys EX-4055 4S four-port card Tested by Wolfgang Denk with this device: 00:0f.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01) Subsystem: Exsys EX-4055 4S(16C550) RS-232 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=128] Region 1: I/O ports at 7080 [size=128] Region 2: I/O ports at 7400 [size=32] 00:0f.0 Class 0280: 10b5:9050 (rev 01) Subsystem: d84d:4055 Results with this patch: Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PCI: Found IRQ 10 for device 0000:00:0f.0 ttyS4 at I/O 0x7400 (irq = 10) is a 16550A ttyS5 at I/O 0x7408 (irq = 10) is a 16550A ttyS6 at I/O 0x7410 (irq = 10) is a 16550A ttyS7 at I/O 0x7418 (irq = 10) is a 16550A Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-25 05:11:57 +08:00
#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PCI_VENDOR_ID_TIGERJET 0xe159
#define PCI_DEVICE_ID_TIGERJET_300 0x0001
#define PCI_DEVICE_ID_TIGERJET_100 0x0002
[ALSA] [PATCH] Add missing sound PCI IDs to pci_ids.h Added missing PCI IDs for sound drivers to pci_ids.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12 20:51:00 +08:00
#define PCI_VENDOR_ID_XILINX_RME 0xea60
#define PCI_DEVICE_ID_RME_DIGI32 0x9896
#define PCI_DEVICE_ID_RME_DIGI32_PRO 0x9897
#define PCI_DEVICE_ID_RME_DIGI32_8 0x9898
xen: Xen PCI platform device driver. Add the xen pci platform device driver that is responsible for initializing the grant table and xenbus in PV on HVM mode. Few changes to xenbus and grant table are necessary to allow the delayed initialization in HVM mode. Grant table needs few additional modifications to work in HVM mode. The Xen PCI platform device raises an irq every time an event has been delivered to us. However these interrupts are only delivered to vcpu 0. The Xen PCI platform interrupt handler calls xen_hvm_evtchn_do_upcall that is a little wrapper around __xen_evtchn_do_upcall, the traditional Xen upcall handler, the very same used with traditional PV guests. When running on HVM the event channel upcall is never called while in progress because it is a normal Linux irq handler (and we cannot switch the irq chip wholesale to the Xen PV ones as we are running QEMU and might have passed in PCI devices), therefore we cannot be sure that evtchn_upcall_pending is 0 when returning. For this reason if evtchn_upcall_pending is set by Xen we need to loop again on the event channels set pending otherwise we might loose some event channel deliveries. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-05-18 00:08:21 +08:00
#define PCI_VENDOR_ID_XEN 0x5853
#define PCI_DEVICE_ID_XEN_PLATFORM 0x0001
[SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 support In the OCZ RevoDrive3/zDrive R4 series, the "OCZ SuperScale Storage Controller" with "Virtualized Controller Architecture 2.0" really seems to be a Marvell 88SE9485 part, with OCZ firmware/BIOS. Developed and tested on OCZ RevoDrive3 120GB [PCI 1b85:1021] Should work on: - OCZ RevoDrive3 (2x SandForce 2281) - OCZ RevoDrive3 X2 (4x SandForce 2281) - OCZ zDrive R4 CM84 (4x SandForce 2281) - OCZ zDrive R4 CM88 (8x SandForce 2281) - OCZ zDrive R4 RM84 (4x SandForce 2582) - OCZ zDrive R4 RM88 (8x SandForce 2582) All of this because a friend recently bought a OCZ RevoDrive3 and was bitten by the lack of Linux support. Notes from testing: ------------------- - SMART works. - VPD Device Identification is "OCZ-REVODRIVE3" - Thin provisioning/TRIM seems to be implemented as WRITE SAME UNMAP, with deterministic (non-zero) read after TRIM, but I'm not sure if it works 100% in my testing. - Some of the tuning in the firmware seems to ensure much better performance when in a RAID0 setup than using the two devices seperately. I have not tested booting from the SSD, because all of this was developed and tested remotely from the actual hardware. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Thanks-To: Gordon Pritchard <gordp@sfu.ca> Acked-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-25 06:30:08 +08:00
#define PCI_VENDOR_ID_OCZ 0x1b85
PCI: Add include guard to include/linux/pci_ids.h Adding an include guard frees the preprocessor from reparsing over 2600 #defines in the cases where pci_ids.h is somehow included more than once. This gives a tiny-but-measurable performance improvement when compiling such files. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-10 20:05:11 +08:00
r8169: add support for NCube 8168 network card This card identifies itself as: Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06) Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468] Adding a new entry to rtl8169_pci_tbl makes the card work. Link: http://launchpad.net/bugs/1788730 Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31 20:06:42 +08:00
#define PCI_VENDOR_ID_NCUBE 0x10ff
PCI: Add include guard to include/linux/pci_ids.h Adding an include guard frees the preprocessor from reparsing over 2600 #defines in the cases where pci_ids.h is somehow included more than once. This gives a tiny-but-measurable performance improvement when compiling such files. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-10 20:05:11 +08:00
#endif /* _LINUX_PCI_IDS_H */