2018-05-04 22:08:08 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
/*
|
|
|
|
* Driver for Cadence MIPI-CSI2 RX Controller v1.3
|
|
|
|
*
|
|
|
|
* Copyright (C) 2017 Cadence Design Systems Inc.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_graph.h>
|
|
|
|
#include <linux/phy/phy.h>
|
|
|
|
#include <linux/platform_device.h>
|
2018-05-25 23:25:09 +08:00
|
|
|
#include <linux/slab.h>
|
2018-05-04 22:08:08 +08:00
|
|
|
|
|
|
|
#include <media/v4l2-ctrls.h>
|
|
|
|
#include <media/v4l2-device.h>
|
|
|
|
#include <media/v4l2-fwnode.h>
|
|
|
|
#include <media/v4l2-subdev.h>
|
|
|
|
|
|
|
|
#define CSI2RX_DEVICE_CFG_REG 0x000
|
|
|
|
|
|
|
|
#define CSI2RX_SOFT_RESET_REG 0x004
|
|
|
|
#define CSI2RX_SOFT_RESET_PROTOCOL BIT(1)
|
|
|
|
#define CSI2RX_SOFT_RESET_FRONT BIT(0)
|
|
|
|
|
|
|
|
#define CSI2RX_STATIC_CFG_REG 0x008
|
|
|
|
#define CSI2RX_STATIC_CFG_DLANE_MAP(llane, plane) ((plane) << (16 + (llane) * 4))
|
|
|
|
#define CSI2RX_STATIC_CFG_LANES_MASK GENMASK(11, 8)
|
|
|
|
|
|
|
|
#define CSI2RX_STREAM_BASE(n) (((n) + 1) * 0x100)
|
|
|
|
|
|
|
|
#define CSI2RX_STREAM_CTRL_REG(n) (CSI2RX_STREAM_BASE(n) + 0x000)
|
|
|
|
#define CSI2RX_STREAM_CTRL_START BIT(0)
|
|
|
|
|
|
|
|
#define CSI2RX_STREAM_DATA_CFG_REG(n) (CSI2RX_STREAM_BASE(n) + 0x008)
|
|
|
|
#define CSI2RX_STREAM_DATA_CFG_EN_VC_SELECT BIT(31)
|
|
|
|
#define CSI2RX_STREAM_DATA_CFG_VC_SELECT(n) BIT((n) + 16)
|
|
|
|
|
|
|
|
#define CSI2RX_STREAM_CFG_REG(n) (CSI2RX_STREAM_BASE(n) + 0x00c)
|
|
|
|
#define CSI2RX_STREAM_CFG_FIFO_MODE_LARGE_BUF (1 << 8)
|
|
|
|
|
|
|
|
#define CSI2RX_LANES_MAX 4
|
|
|
|
#define CSI2RX_STREAMS_MAX 4
|
|
|
|
|
|
|
|
enum csi2rx_pads {
|
|
|
|
CSI2RX_PAD_SINK,
|
|
|
|
CSI2RX_PAD_SOURCE_STREAM0,
|
|
|
|
CSI2RX_PAD_SOURCE_STREAM1,
|
|
|
|
CSI2RX_PAD_SOURCE_STREAM2,
|
|
|
|
CSI2RX_PAD_SOURCE_STREAM3,
|
|
|
|
CSI2RX_PAD_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct csi2rx_priv {
|
|
|
|
struct device *dev;
|
|
|
|
unsigned int count;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Used to prevent race conditions between multiple,
|
|
|
|
* concurrent calls to start and stop.
|
|
|
|
*/
|
|
|
|
struct mutex lock;
|
|
|
|
|
|
|
|
void __iomem *base;
|
|
|
|
struct clk *sys_clk;
|
|
|
|
struct clk *p_clk;
|
|
|
|
struct clk *pixel_clk[CSI2RX_STREAMS_MAX];
|
|
|
|
struct phy *dphy;
|
|
|
|
|
|
|
|
u8 lanes[CSI2RX_LANES_MAX];
|
|
|
|
u8 num_lanes;
|
|
|
|
u8 max_lanes;
|
|
|
|
u8 max_streams;
|
|
|
|
bool has_internal_dphy;
|
|
|
|
|
|
|
|
struct v4l2_subdev subdev;
|
|
|
|
struct v4l2_async_notifier notifier;
|
|
|
|
struct media_pad pads[CSI2RX_PAD_MAX];
|
|
|
|
|
|
|
|
/* Remote source */
|
|
|
|
struct v4l2_async_subdev asd;
|
|
|
|
struct v4l2_subdev *source_subdev;
|
|
|
|
int source_pad;
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline
|
|
|
|
struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev)
|
|
|
|
{
|
|
|
|
return container_of(subdev, struct csi2rx_priv, subdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void csi2rx_reset(struct csi2rx_priv *csi2rx)
|
|
|
|
{
|
|
|
|
writel(CSI2RX_SOFT_RESET_PROTOCOL | CSI2RX_SOFT_RESET_FRONT,
|
|
|
|
csi2rx->base + CSI2RX_SOFT_RESET_REG);
|
|
|
|
|
|
|
|
udelay(10);
|
|
|
|
|
|
|
|
writel(0, csi2rx->base + CSI2RX_SOFT_RESET_REG);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int csi2rx_start(struct csi2rx_priv *csi2rx)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
unsigned long lanes_used = 0;
|
|
|
|
u32 reg;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = clk_prepare_enable(csi2rx->p_clk);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
csi2rx_reset(csi2rx);
|
|
|
|
|
|
|
|
reg = csi2rx->num_lanes << 8;
|
|
|
|
for (i = 0; i < csi2rx->num_lanes; i++) {
|
|
|
|
reg |= CSI2RX_STATIC_CFG_DLANE_MAP(i, csi2rx->lanes[i]);
|
|
|
|
set_bit(csi2rx->lanes[i], &lanes_used);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Even the unused lanes need to be mapped. In order to avoid
|
|
|
|
* to map twice to the same physical lane, keep the lanes used
|
|
|
|
* in the previous loop, and only map unused physical lanes to
|
|
|
|
* the rest of our logical lanes.
|
|
|
|
*/
|
|
|
|
for (i = csi2rx->num_lanes; i < csi2rx->max_lanes; i++) {
|
|
|
|
unsigned int idx = find_first_zero_bit(&lanes_used,
|
2019-09-14 03:06:47 +08:00
|
|
|
csi2rx->max_lanes);
|
2018-05-04 22:08:08 +08:00
|
|
|
set_bit(idx, &lanes_used);
|
|
|
|
reg |= CSI2RX_STATIC_CFG_DLANE_MAP(i, i + 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
writel(reg, csi2rx->base + CSI2RX_STATIC_CFG_REG);
|
|
|
|
|
|
|
|
ret = v4l2_subdev_call(csi2rx->source_subdev, video, s_stream, true);
|
|
|
|
if (ret)
|
|
|
|
goto err_disable_pclk;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Create a static mapping between the CSI virtual channels
|
|
|
|
* and the output stream.
|
|
|
|
*
|
|
|
|
* This should be enhanced, but v4l2 lacks the support for
|
|
|
|
* changing that mapping dynamically.
|
|
|
|
*
|
|
|
|
* We also cannot enable and disable independent streams here,
|
|
|
|
* hence the reference counting.
|
|
|
|
*/
|
|
|
|
for (i = 0; i < csi2rx->max_streams; i++) {
|
|
|
|
ret = clk_prepare_enable(csi2rx->pixel_clk[i]);
|
|
|
|
if (ret)
|
|
|
|
goto err_disable_pixclk;
|
|
|
|
|
|
|
|
writel(CSI2RX_STREAM_CFG_FIFO_MODE_LARGE_BUF,
|
|
|
|
csi2rx->base + CSI2RX_STREAM_CFG_REG(i));
|
|
|
|
|
|
|
|
writel(CSI2RX_STREAM_DATA_CFG_EN_VC_SELECT |
|
|
|
|
CSI2RX_STREAM_DATA_CFG_VC_SELECT(i),
|
|
|
|
csi2rx->base + CSI2RX_STREAM_DATA_CFG_REG(i));
|
|
|
|
|
|
|
|
writel(CSI2RX_STREAM_CTRL_START,
|
|
|
|
csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = clk_prepare_enable(csi2rx->sys_clk);
|
|
|
|
if (ret)
|
|
|
|
goto err_disable_pixclk;
|
|
|
|
|
|
|
|
clk_disable_unprepare(csi2rx->p_clk);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_disable_pixclk:
|
2018-05-10 04:24:35 +08:00
|
|
|
for (; i > 0; i--)
|
|
|
|
clk_disable_unprepare(csi2rx->pixel_clk[i - 1]);
|
2018-05-04 22:08:08 +08:00
|
|
|
|
|
|
|
err_disable_pclk:
|
|
|
|
clk_disable_unprepare(csi2rx->p_clk);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void csi2rx_stop(struct csi2rx_priv *csi2rx)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
clk_prepare_enable(csi2rx->p_clk);
|
|
|
|
clk_disable_unprepare(csi2rx->sys_clk);
|
|
|
|
|
|
|
|
for (i = 0; i < csi2rx->max_streams; i++) {
|
|
|
|
writel(0, csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
|
|
|
|
|
|
|
|
clk_disable_unprepare(csi2rx->pixel_clk[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
clk_disable_unprepare(csi2rx->p_clk);
|
|
|
|
|
|
|
|
if (v4l2_subdev_call(csi2rx->source_subdev, video, s_stream, false))
|
|
|
|
dev_warn(csi2rx->dev, "Couldn't disable our subdev\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
static int csi2rx_s_stream(struct v4l2_subdev *subdev, int enable)
|
|
|
|
{
|
|
|
|
struct csi2rx_priv *csi2rx = v4l2_subdev_to_csi2rx(subdev);
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
mutex_lock(&csi2rx->lock);
|
|
|
|
|
|
|
|
if (enable) {
|
|
|
|
/*
|
|
|
|
* If we're not the first users, there's no need to
|
|
|
|
* enable the whole controller.
|
|
|
|
*/
|
|
|
|
if (!csi2rx->count) {
|
|
|
|
ret = csi2rx_start(csi2rx);
|
|
|
|
if (ret)
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
csi2rx->count++;
|
|
|
|
} else {
|
|
|
|
csi2rx->count--;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Let the last user turn off the lights.
|
|
|
|
*/
|
|
|
|
if (!csi2rx->count)
|
|
|
|
csi2rx_stop(csi2rx);
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
mutex_unlock(&csi2rx->lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_video_ops csi2rx_video_ops = {
|
|
|
|
.s_stream = csi2rx_s_stream,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_ops csi2rx_subdev_ops = {
|
|
|
|
.video = &csi2rx_video_ops,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int csi2rx_async_bound(struct v4l2_async_notifier *notifier,
|
|
|
|
struct v4l2_subdev *s_subdev,
|
|
|
|
struct v4l2_async_subdev *asd)
|
|
|
|
{
|
|
|
|
struct v4l2_subdev *subdev = notifier->sd;
|
|
|
|
struct csi2rx_priv *csi2rx = v4l2_subdev_to_csi2rx(subdev);
|
|
|
|
|
|
|
|
csi2rx->source_pad = media_entity_get_fwnode_pad(&s_subdev->entity,
|
|
|
|
s_subdev->fwnode,
|
|
|
|
MEDIA_PAD_FL_SOURCE);
|
|
|
|
if (csi2rx->source_pad < 0) {
|
|
|
|
dev_err(csi2rx->dev, "Couldn't find output pad for subdev %s\n",
|
|
|
|
s_subdev->name);
|
|
|
|
return csi2rx->source_pad;
|
|
|
|
}
|
|
|
|
|
|
|
|
csi2rx->source_subdev = s_subdev;
|
|
|
|
|
|
|
|
dev_dbg(csi2rx->dev, "Bound %s pad: %d\n", s_subdev->name,
|
|
|
|
csi2rx->source_pad);
|
|
|
|
|
|
|
|
return media_create_pad_link(&csi2rx->source_subdev->entity,
|
|
|
|
csi2rx->source_pad,
|
|
|
|
&csi2rx->subdev.entity, 0,
|
|
|
|
MEDIA_LNK_FL_ENABLED |
|
|
|
|
MEDIA_LNK_FL_IMMUTABLE);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct v4l2_async_notifier_operations csi2rx_notifier_ops = {
|
|
|
|
.bound = csi2rx_async_bound,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int csi2rx_get_resources(struct csi2rx_priv *csi2rx,
|
|
|
|
struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct resource *res;
|
|
|
|
unsigned char i;
|
|
|
|
u32 dev_cfg;
|
|
|
|
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
csi2rx->base = devm_ioremap_resource(&pdev->dev, res);
|
|
|
|
if (IS_ERR(csi2rx->base))
|
|
|
|
return PTR_ERR(csi2rx->base);
|
|
|
|
|
|
|
|
csi2rx->sys_clk = devm_clk_get(&pdev->dev, "sys_clk");
|
|
|
|
if (IS_ERR(csi2rx->sys_clk)) {
|
|
|
|
dev_err(&pdev->dev, "Couldn't get sys clock\n");
|
|
|
|
return PTR_ERR(csi2rx->sys_clk);
|
|
|
|
}
|
|
|
|
|
|
|
|
csi2rx->p_clk = devm_clk_get(&pdev->dev, "p_clk");
|
|
|
|
if (IS_ERR(csi2rx->p_clk)) {
|
|
|
|
dev_err(&pdev->dev, "Couldn't get P clock\n");
|
|
|
|
return PTR_ERR(csi2rx->p_clk);
|
|
|
|
}
|
|
|
|
|
|
|
|
csi2rx->dphy = devm_phy_optional_get(&pdev->dev, "dphy");
|
|
|
|
if (IS_ERR(csi2rx->dphy)) {
|
|
|
|
dev_err(&pdev->dev, "Couldn't get external D-PHY\n");
|
|
|
|
return PTR_ERR(csi2rx->dphy);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* FIXME: Once we'll have external D-PHY support, the check
|
|
|
|
* will need to be removed.
|
|
|
|
*/
|
|
|
|
if (csi2rx->dphy) {
|
|
|
|
dev_err(&pdev->dev, "External D-PHY not supported yet\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
clk_prepare_enable(csi2rx->p_clk);
|
|
|
|
dev_cfg = readl(csi2rx->base + CSI2RX_DEVICE_CFG_REG);
|
|
|
|
clk_disable_unprepare(csi2rx->p_clk);
|
|
|
|
|
|
|
|
csi2rx->max_lanes = dev_cfg & 7;
|
|
|
|
if (csi2rx->max_lanes > CSI2RX_LANES_MAX) {
|
|
|
|
dev_err(&pdev->dev, "Invalid number of lanes: %u\n",
|
|
|
|
csi2rx->max_lanes);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
csi2rx->max_streams = (dev_cfg >> 4) & 7;
|
|
|
|
if (csi2rx->max_streams > CSI2RX_STREAMS_MAX) {
|
|
|
|
dev_err(&pdev->dev, "Invalid number of streams: %u\n",
|
|
|
|
csi2rx->max_streams);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
csi2rx->has_internal_dphy = dev_cfg & BIT(3) ? true : false;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* FIXME: Once we'll have internal D-PHY support, the check
|
|
|
|
* will need to be removed.
|
|
|
|
*/
|
|
|
|
if (csi2rx->has_internal_dphy) {
|
|
|
|
dev_err(&pdev->dev, "Internal D-PHY not supported yet\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < csi2rx->max_streams; i++) {
|
|
|
|
char clk_name[16];
|
|
|
|
|
|
|
|
snprintf(clk_name, sizeof(clk_name), "pixel_if%u_clk", i);
|
|
|
|
csi2rx->pixel_clk[i] = devm_clk_get(&pdev->dev, clk_name);
|
|
|
|
if (IS_ERR(csi2rx->pixel_clk[i])) {
|
|
|
|
dev_err(&pdev->dev, "Couldn't get clock %s\n", clk_name);
|
|
|
|
return PTR_ERR(csi2rx->pixel_clk[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int csi2rx_parse_dt(struct csi2rx_priv *csi2rx)
|
|
|
|
{
|
2018-07-31 17:15:50 +08:00
|
|
|
struct v4l2_fwnode_endpoint v4l2_ep = { .bus_type = 0 };
|
2018-05-04 22:08:08 +08:00
|
|
|
struct fwnode_handle *fwh;
|
|
|
|
struct device_node *ep;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ep = of_graph_get_endpoint_by_regs(csi2rx->dev->of_node, 0, 0);
|
|
|
|
if (!ep)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
fwh = of_fwnode_handle(ep);
|
|
|
|
ret = v4l2_fwnode_endpoint_parse(fwh, &v4l2_ep);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(csi2rx->dev, "Could not parse v4l2 endpoint\n");
|
|
|
|
of_node_put(ep);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2018-07-04 05:19:27 +08:00
|
|
|
if (v4l2_ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
|
2018-05-04 22:08:08 +08:00
|
|
|
dev_err(csi2rx->dev, "Unsupported media bus type: 0x%x\n",
|
|
|
|
v4l2_ep.bus_type);
|
|
|
|
of_node_put(ep);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
memcpy(csi2rx->lanes, v4l2_ep.bus.mipi_csi2.data_lanes,
|
|
|
|
sizeof(csi2rx->lanes));
|
|
|
|
csi2rx->num_lanes = v4l2_ep.bus.mipi_csi2.num_data_lanes;
|
|
|
|
if (csi2rx->num_lanes > csi2rx->max_lanes) {
|
|
|
|
dev_err(csi2rx->dev, "Unsupported number of data-lanes: %d\n",
|
|
|
|
csi2rx->num_lanes);
|
|
|
|
of_node_put(ep);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
csi2rx->asd.match.fwnode = fwnode_graph_get_remote_port_parent(fwh);
|
|
|
|
csi2rx->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
|
|
|
|
of_node_put(ep);
|
|
|
|
|
2018-09-30 03:54:18 +08:00
|
|
|
v4l2_async_notifier_init(&csi2rx->notifier);
|
|
|
|
|
|
|
|
ret = v4l2_async_notifier_add_subdev(&csi2rx->notifier, &csi2rx->asd);
|
|
|
|
if (ret) {
|
|
|
|
fwnode_handle_put(csi2rx->asd.match.fwnode);
|
|
|
|
return ret;
|
|
|
|
}
|
2018-05-04 22:08:08 +08:00
|
|
|
|
|
|
|
csi2rx->notifier.ops = &csi2rx_notifier_ops;
|
|
|
|
|
2018-09-30 03:54:18 +08:00
|
|
|
ret = v4l2_async_subdev_notifier_register(&csi2rx->subdev,
|
|
|
|
&csi2rx->notifier);
|
|
|
|
if (ret)
|
|
|
|
v4l2_async_notifier_cleanup(&csi2rx->notifier);
|
|
|
|
|
|
|
|
return ret;
|
2018-05-04 22:08:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int csi2rx_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct csi2rx_priv *csi2rx;
|
|
|
|
unsigned int i;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
csi2rx = kzalloc(sizeof(*csi2rx), GFP_KERNEL);
|
|
|
|
if (!csi2rx)
|
|
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, csi2rx);
|
|
|
|
csi2rx->dev = &pdev->dev;
|
|
|
|
mutex_init(&csi2rx->lock);
|
|
|
|
|
|
|
|
ret = csi2rx_get_resources(csi2rx, pdev);
|
|
|
|
if (ret)
|
|
|
|
goto err_free_priv;
|
|
|
|
|
|
|
|
ret = csi2rx_parse_dt(csi2rx);
|
|
|
|
if (ret)
|
|
|
|
goto err_free_priv;
|
|
|
|
|
|
|
|
csi2rx->subdev.owner = THIS_MODULE;
|
|
|
|
csi2rx->subdev.dev = &pdev->dev;
|
|
|
|
v4l2_subdev_init(&csi2rx->subdev, &csi2rx_subdev_ops);
|
|
|
|
v4l2_set_subdevdata(&csi2rx->subdev, &pdev->dev);
|
|
|
|
snprintf(csi2rx->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s.%s",
|
|
|
|
KBUILD_MODNAME, dev_name(&pdev->dev));
|
|
|
|
|
|
|
|
/* Create our media pads */
|
|
|
|
csi2rx->subdev.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
|
|
|
|
csi2rx->pads[CSI2RX_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
|
|
|
|
for (i = CSI2RX_PAD_SOURCE_STREAM0; i < CSI2RX_PAD_MAX; i++)
|
|
|
|
csi2rx->pads[i].flags = MEDIA_PAD_FL_SOURCE;
|
|
|
|
|
|
|
|
ret = media_entity_pads_init(&csi2rx->subdev.entity, CSI2RX_PAD_MAX,
|
|
|
|
csi2rx->pads);
|
|
|
|
if (ret)
|
2018-09-30 03:54:18 +08:00
|
|
|
goto err_cleanup;
|
2018-05-04 22:08:08 +08:00
|
|
|
|
|
|
|
ret = v4l2_async_register_subdev(&csi2rx->subdev);
|
|
|
|
if (ret < 0)
|
2018-09-30 03:54:18 +08:00
|
|
|
goto err_cleanup;
|
2018-05-04 22:08:08 +08:00
|
|
|
|
|
|
|
dev_info(&pdev->dev,
|
|
|
|
"Probed CSI2RX with %u/%u lanes, %u streams, %s D-PHY\n",
|
|
|
|
csi2rx->num_lanes, csi2rx->max_lanes, csi2rx->max_streams,
|
|
|
|
csi2rx->has_internal_dphy ? "internal" : "no");
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
2018-09-30 03:54:18 +08:00
|
|
|
err_cleanup:
|
|
|
|
v4l2_async_notifier_cleanup(&csi2rx->notifier);
|
2018-05-04 22:08:08 +08:00
|
|
|
err_free_priv:
|
|
|
|
kfree(csi2rx);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int csi2rx_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct csi2rx_priv *csi2rx = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
v4l2_async_unregister_subdev(&csi2rx->subdev);
|
|
|
|
kfree(csi2rx);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct of_device_id csi2rx_of_table[] = {
|
|
|
|
{ .compatible = "cdns,csi2rx" },
|
|
|
|
{ },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, csi2rx_of_table);
|
|
|
|
|
|
|
|
static struct platform_driver csi2rx_driver = {
|
|
|
|
.probe = csi2rx_probe,
|
|
|
|
.remove = csi2rx_remove,
|
|
|
|
|
|
|
|
.driver = {
|
|
|
|
.name = "cdns-csi2rx",
|
|
|
|
.of_match_table = csi2rx_of_table,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
module_platform_driver(csi2rx_driver);
|
|
|
|
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@bootlin.com>");
|
|
|
|
MODULE_DESCRIPTION("Cadence CSI2-RX controller");
|
|
|
|
MODULE_LICENSE("GPL");
|