OpenCloudOS-Kernel/arch/x86/include/asm/atomic64_32.h

305 lines
6.7 KiB
C
Raw Normal View History

#ifndef _ASM_X86_ATOMIC64_32_H
#define _ASM_X86_ATOMIC64_32_H
#include <linux/compiler.h>
#include <linux/types.h>
#include <asm/processor.h>
//#include <asm/cmpxchg.h>
/* An 64bit atomic type */
typedef struct {
u64 __aligned(8) counter;
} atomic64_t;
#define ATOMIC64_INIT(val) { (val) }
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
#ifdef CONFIG_X86_CMPXCHG64
#define ATOMIC64_ALTERNATIVE_(f, g) "call atomic64_" #g "_cx8"
#else
#define ATOMIC64_ALTERNATIVE_(f, g) ALTERNATIVE("call atomic64_" #f "_386", "call atomic64_" #g "_cx8", X86_FEATURE_CX8)
#endif
#define ATOMIC64_ALTERNATIVE(f) ATOMIC64_ALTERNATIVE_(f, f)
/**
* atomic64_cmpxchg - cmpxchg atomic64 variable
* @p: pointer to type atomic64_t
* @o: expected value
* @n: new value
*
* Atomically sets @v to @n if it was equal to @o and returns
* the old value.
*/
static inline long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
{
return cmpxchg64(&v->counter, o, n);
}
/**
* atomic64_xchg - xchg atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @v: pointer to type atomic64_t
* @n: value to assign
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically xchgs the value of @v to @n and returns
* the old value.
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline long long atomic64_xchg(atomic64_t *v, long long n)
{
long long o;
unsigned high = (unsigned)(n >> 32);
unsigned low = (unsigned)n;
asm volatile(ATOMIC64_ALTERNATIVE(xchg)
: "=A" (o), "+b" (low), "+c" (high)
: "S" (v)
: "memory"
);
return o;
}
/**
* atomic64_set - set atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @v: pointer to type atomic64_t
* @n: value to assign
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically sets the value of @v to @n.
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline void atomic64_set(atomic64_t *v, long long i)
{
unsigned high = (unsigned)(i >> 32);
unsigned low = (unsigned)i;
asm volatile(ATOMIC64_ALTERNATIVE(set)
: "+b" (low), "+c" (high)
: "S" (v)
: "eax", "edx", "memory"
);
}
/**
* atomic64_read - read atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically reads the value of @v and returns it.
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline long long atomic64_read(atomic64_t *v)
{
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
long long r;
asm volatile(ATOMIC64_ALTERNATIVE(read)
: "=A" (r), "+c" (v)
: : "memory"
);
return r;
}
/**
* atomic64_add_return - add and return
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @i: integer value to add
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically adds @i to @v and returns @i + *@v
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline long long atomic64_add_return(long long i, atomic64_t *v)
{
asm volatile(ATOMIC64_ALTERNATIVE(add_return)
: "+A" (i), "+c" (v)
: : "memory"
);
return i;
}
/*
* Other variants with different arithmetic operators:
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline long long atomic64_sub_return(long long i, atomic64_t *v)
{
asm volatile(ATOMIC64_ALTERNATIVE(sub_return)
: "+A" (i), "+c" (v)
: : "memory"
);
return i;
}
static inline long long atomic64_inc_return(atomic64_t *v)
{
long long a;
asm volatile(ATOMIC64_ALTERNATIVE(inc_return)
: "=A" (a)
: "S" (v)
: "memory", "ecx"
);
return a;
}
static inline long long atomic64_dec_return(atomic64_t *v)
{
long long a;
asm volatile(ATOMIC64_ALTERNATIVE(dec_return)
: "=A" (a)
: "S" (v)
: "memory", "ecx"
);
return a;
}
/**
* atomic64_add - add integer to atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @i: integer value to add
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically adds @i to @v.
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline long long atomic64_add(long long i, atomic64_t *v)
{
asm volatile(ATOMIC64_ALTERNATIVE_(add, add_return)
: "+A" (i), "+c" (v)
: : "memory"
);
return i;
}
/**
* atomic64_sub - subtract the atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @i: integer value to subtract
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically subtracts @i from @v.
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline long long atomic64_sub(long long i, atomic64_t *v)
{
asm volatile(ATOMIC64_ALTERNATIVE_(sub, sub_return)
: "+A" (i), "+c" (v)
: : "memory"
);
return i;
}
/**
* atomic64_sub_and_test - subtract value from variable and test result
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @i: integer value to subtract
* @v: pointer to type atomic64_t
*
* Atomically subtracts @i from @v and returns
* true if the result is zero, or false for all
* other cases.
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline int atomic64_sub_and_test(long long i, atomic64_t *v)
{
return atomic64_sub_return(i, v) == 0;
}
/**
* atomic64_inc - increment atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically increments @v by 1.
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline void atomic64_inc(atomic64_t *v)
{
asm volatile(ATOMIC64_ALTERNATIVE_(inc, inc_return)
: : "S" (v)
: "memory", "eax", "ecx", "edx"
);
}
/**
* atomic64_dec - decrement atomic64 variable
* @ptr: pointer to type atomic64_t
*
* Atomically decrements @ptr by 1.
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline void atomic64_dec(atomic64_t *v)
{
asm volatile(ATOMIC64_ALTERNATIVE_(dec, dec_return)
: : "S" (v)
: "memory", "eax", "ecx", "edx"
);
}
/**
* atomic64_dec_and_test - decrement and test
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically decrements @v by 1 and
* returns true if the result is 0, or false for all other
* cases.
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline int atomic64_dec_and_test(atomic64_t *v)
{
return atomic64_dec_return(v) == 0;
}
/**
* atomic64_inc_and_test - increment and test
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically increments @v by 1
* and returns true if the result is zero, or false for all
* other cases.
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline int atomic64_inc_and_test(atomic64_t *v)
{
return atomic64_inc_return(v) == 0;
}
/**
* atomic64_add_negative - add and test if negative
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @i: integer value to add
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically adds @i to @v and returns true
* if the result is negative, or false when
* result is greater than or equal to zero.
*/
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline int atomic64_add_negative(long long i, atomic64_t *v)
{
return atomic64_add_return(i, v) < 0;
}
/**
* atomic64_add_unless - add unless the number is a given value
* @v: pointer of type atomic64_t
* @a: the amount to add to v...
* @u: ...unless v is equal to u.
*
* Atomically adds @a to @v, so long as it was not @u.
* Returns non-zero if @v was not @u, and zero otherwise.
*/
static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
{
unsigned low = (unsigned)u;
unsigned high = (unsigned)(u >> 32);
asm volatile(ATOMIC64_ALTERNATIVE(add_unless) "\n\t"
: "+A" (a), "+c" (v), "+S" (low), "+D" (high)
: : "memory");
return (int)a;
}
static inline int atomic64_inc_not_zero(atomic64_t *v)
{
int r;
asm volatile(ATOMIC64_ALTERNATIVE(inc_not_zero)
: "=a" (r)
: "S" (v)
: "ecx", "edx", "memory"
);
return r;
}
static inline long long atomic64_dec_if_positive(atomic64_t *v)
{
long long r;
asm volatile(ATOMIC64_ALTERNATIVE(dec_if_positive)
: "=A" (r)
: "S" (v)
: "ecx", "memory"
);
return r;
}
#undef ATOMIC64_ALTERNATIVE
#undef ATOMIC64_ALTERNATIVE_
#endif /* _ASM_X86_ATOMIC64_32_H */