OpenCloudOS-Kernel/drivers/pci/setup-bus.c

1646 lines
44 KiB
C
Raw Normal View History

/*
* drivers/pci/setup-bus.c
*
* Extruded from code written by
* Dave Rusling (david.rusling@reo.mts.dec.com)
* David Mosberger (davidm@cs.arizona.edu)
* David Miller (davem@redhat.com)
*
* Support routines for initializing a PCI subsystem.
*/
/*
* Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
* PCI-PCI bridges cleanup, sorted resource allocation.
* Feb 2002, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
* Converted to allocation in 3 passes, which gives
* tighter packing. Prefetchable range support.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/cache.h>
#include <linux/slab.h>
#include <asm-generic/pci-bridge.h>
PCI SR-IOV: correct broken resource alignment calculations An SR-IOV capable device includes an SR-IOV PCIe capability which describes the Virtual Function (VF) BAR requirements. A typical SR-IOV device can support multiple VFs whose BARs must be in a contiguous region, effectively an array of VF BARs. The BAR reports the size requirement for a single VF. We calculate the full range needed by simply multiplying the VF BAR size with the number of possible VFs and create a resource spanning the full range. This all seems sane enough except it artificially inflates the alignment requirement for the VF BAR. The VF BAR need only be aligned to the size of a single BAR not the contiguous range of VF BARs. This can cause us to fail to allocate resources for the BAR despite the fact that we actually have enough space. This patch adds a thin PCI specific layer over the generic resource_alignment() function which is aware of the special nature of VF BARs and does sorting and allocation based on the smaller alignment requirement. I recognize that while resource_alignment is generic, it's basically a PCI helper. An alternative to this patch is to add PCI VF BAR specific information to struct resource. I opted for the extra layer rather than adding such PCI specific information to struct resource. This does have the slight downside that we don't cache the BAR size and re-read for each alignment query (happens a small handful of times during boot for each VF BAR). Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Yu Zhao <yu.zhao@intel.com> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-29 04:00:06 +08:00
#include "pci.h"
unsigned int pci_flags;
struct pci_dev_resource {
struct list_head list;
struct resource *res;
struct pci_dev *dev;
resource_size_t start;
resource_size_t end;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
resource_size_t add_size;
resource_size_t min_align;
unsigned long flags;
};
static void free_list(struct list_head *head)
{
struct pci_dev_resource *dev_res, *tmp;
list_for_each_entry_safe(dev_res, tmp, head, list) {
list_del(&dev_res->list);
kfree(dev_res);
}
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
/**
* add_to_list() - add a new resource tracker to the list
* @head: Head of the list
* @dev: device corresponding to which the resource
* belongs
* @res: The resource to be tracked
* @add_size: additional size to be optionally added
* to the resource
*/
static int add_to_list(struct list_head *head,
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
struct pci_dev *dev, struct resource *res,
resource_size_t add_size, resource_size_t min_align)
{
struct pci_dev_resource *tmp;
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp) {
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
pr_warning("add_to_list: kmalloc() failed!\n");
return -ENOMEM;
}
tmp->res = res;
tmp->dev = dev;
tmp->start = res->start;
tmp->end = res->end;
tmp->flags = res->flags;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
tmp->add_size = add_size;
tmp->min_align = min_align;
list_add(&tmp->list, head);
return 0;
}
static void remove_from_list(struct list_head *head,
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
struct resource *res)
{
struct pci_dev_resource *dev_res, *tmp;
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
list_for_each_entry_safe(dev_res, tmp, head, list) {
if (dev_res->res == res) {
list_del(&dev_res->list);
kfree(dev_res);
break;
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
}
}
}
static resource_size_t get_res_add_size(struct list_head *head,
struct resource *res)
{
struct pci_dev_resource *dev_res;
list_for_each_entry(dev_res, head, list) {
if (dev_res->res == res) {
int idx = res - &dev_res->dev->resource[0];
dev_printk(KERN_DEBUG, &dev_res->dev->dev,
"res[%d]=%pR get_res_add_size add_size %llx\n",
idx, dev_res->res,
(unsigned long long)dev_res->add_size);
return dev_res->add_size;
}
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
}
return 0;
}
/* Sort resources by alignment */
static void pdev_sort_resources(struct pci_dev *dev, struct list_head *head)
{
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r;
struct pci_dev_resource *dev_res, *tmp;
resource_size_t r_align;
struct list_head *n;
r = &dev->resource[i];
if (r->flags & IORESOURCE_PCI_FIXED)
continue;
if (!(r->flags) || r->parent)
continue;
r_align = pci_resource_alignment(dev, r);
if (!r_align) {
dev_warn(&dev->dev, "BAR %d: %pR has bogus alignment\n",
i, r);
continue;
}
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp)
panic("pdev_sort_resources(): "
"kmalloc() failed!\n");
tmp->res = r;
tmp->dev = dev;
/* fallback is smallest one or list is empty*/
n = head;
list_for_each_entry(dev_res, head, list) {
resource_size_t align;
align = pci_resource_alignment(dev_res->dev,
dev_res->res);
if (r_align > align) {
n = &dev_res->list;
break;
}
}
/* Insert it just before n*/
list_add_tail(&tmp->list, n);
}
}
static void __dev_sort_resources(struct pci_dev *dev,
struct list_head *head)
{
u16 class = dev->class >> 8;
/* Don't touch classless devices or host bridges or ioapics. */
if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST)
return;
/* Don't touch ioapic devices already enabled by firmware */
if (class == PCI_CLASS_SYSTEM_PIC) {
u16 command;
pci_read_config_word(dev, PCI_COMMAND, &command);
if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
return;
}
pdev_sort_resources(dev, head);
}
static inline void reset_resource(struct resource *res)
{
res->start = 0;
res->end = 0;
res->flags = 0;
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
/**
* reassign_resources_sorted() - satisfy any additional resource requests
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
*
* @realloc_head : head of the list tracking requests requiring additional
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
* resources
* @head : head of the list tracking requests with allocated
* resources
*
* Walk through each element of the realloc_head and try to procure
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
* additional resources for the element, provided the element
* is in the head list.
*/
static void reassign_resources_sorted(struct list_head *realloc_head,
struct list_head *head)
{
struct resource *res;
struct pci_dev_resource *add_res, *tmp;
struct pci_dev_resource *dev_res;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
resource_size_t add_size;
int idx;
list_for_each_entry_safe(add_res, tmp, realloc_head, list) {
bool found_match = false;
res = add_res->res;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
/* skip resource that has been reset */
if (!res->flags)
goto out;
/* skip this resource if not found in head list */
list_for_each_entry(dev_res, head, list) {
if (dev_res->res == res) {
found_match = true;
break;
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
}
if (!found_match)/* just skip */
continue;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
idx = res - &add_res->dev->resource[0];
add_size = add_res->add_size;
if (!resource_size(res)) {
res->start = add_res->start;
res->end = res->start + add_size - 1;
if (pci_assign_resource(add_res->dev, idx))
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
reset_resource(res);
} else {
resource_size_t align = add_res->min_align;
res->flags |= add_res->flags &
(IORESOURCE_STARTALIGN|IORESOURCE_SIZEALIGN);
if (pci_reassign_resource(add_res->dev, idx,
add_size, align))
dev_printk(KERN_DEBUG, &add_res->dev->dev,
"failed to add %llx res[%d]=%pR\n",
(unsigned long long)add_size,
idx, res);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
}
out:
list_del(&add_res->list);
kfree(add_res);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
}
}
/**
* assign_requested_resources_sorted() - satisfy resource requests
*
* @head : head of the list tracking requests for resources
* @fail_head : head of the list tracking requests that could
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
* not be allocated
*
* Satisfy resource requests of each element in the list. Add
* requests that could not satisfied to the failed_list.
*/
static void assign_requested_resources_sorted(struct list_head *head,
struct list_head *fail_head)
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
{
struct resource *res;
struct pci_dev_resource *dev_res;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
int idx;
list_for_each_entry(dev_res, head, list) {
res = dev_res->res;
idx = res - &dev_res->dev->resource[0];
if (resource_size(res) &&
pci_assign_resource(dev_res->dev, idx)) {
if (fail_head) {
/*
* if the failed res is for ROM BAR, and it will
* be enabled later, don't add it to the list
*/
if (!((idx == PCI_ROM_RESOURCE) &&
(!(res->flags & IORESOURCE_ROM_ENABLE))))
add_to_list(fail_head,
dev_res->dev, res,
0 /* don't care */,
0 /* don't care */);
}
reset_resource(res);
}
}
}
static unsigned long pci_fail_res_type_mask(struct list_head *fail_head)
{
struct pci_dev_resource *fail_res;
unsigned long mask = 0;
/* check failed type */
list_for_each_entry(fail_res, fail_head, list)
mask |= fail_res->flags;
/*
* one pref failed resource will set IORESOURCE_MEM,
* as we can allocate pref in non-pref range.
* Will release all assigned non-pref sibling resources
* according to that bit.
*/
return mask & (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH);
}
static bool pci_need_to_release(unsigned long mask, struct resource *res)
{
if (res->flags & IORESOURCE_IO)
return !!(mask & IORESOURCE_IO);
/* check pref at first */
if (res->flags & IORESOURCE_PREFETCH) {
if (mask & IORESOURCE_PREFETCH)
return true;
/* count pref if its parent is non-pref */
else if ((mask & IORESOURCE_MEM) &&
!(res->parent->flags & IORESOURCE_PREFETCH))
return true;
else
return false;
}
if (res->flags & IORESOURCE_MEM)
return !!(mask & IORESOURCE_MEM);
return false; /* should not get here */
}
static void __assign_resources_sorted(struct list_head *head,
struct list_head *realloc_head,
struct list_head *fail_head)
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
{
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
/*
* Should not assign requested resources at first.
* they could be adjacent, so later reassign can not reallocate
* them one by one in parent resource window.
* Try to assign requested + add_size at beginning
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
* if could do that, could get out early.
* if could not do that, we still try to assign requested at first,
* then try to reassign add_size for some resources.
*
* Separate three resource type checking if we need to release
* assigned resource after requested + add_size try.
* 1. if there is io port assign fail, will release assigned
* io port.
* 2. if there is pref mmio assign fail, release assigned
* pref mmio.
* if assigned pref mmio's parent is non-pref mmio and there
* is non-pref mmio assign fail, will release that assigned
* pref mmio.
* 3. if there is non-pref mmio assign fail or pref mmio
* assigned fail, will release assigned non-pref mmio.
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
*/
LIST_HEAD(save_head);
LIST_HEAD(local_fail_head);
struct pci_dev_resource *save_res;
struct pci_dev_resource *dev_res, *tmp_res;
unsigned long fail_type;
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
/* Check if optional add_size is there */
if (!realloc_head || list_empty(realloc_head))
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
goto requested_and_reassign;
/* Save original start, end, flags etc at first */
list_for_each_entry(dev_res, head, list) {
if (add_to_list(&save_head, dev_res->dev, dev_res->res, 0, 0)) {
free_list(&save_head);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
goto requested_and_reassign;
}
}
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
/* Update res in head list with add_size in realloc_head list */
list_for_each_entry(dev_res, head, list)
dev_res->res->end += get_res_add_size(realloc_head,
dev_res->res);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
/* Try updated head list with add_size added */
assign_requested_resources_sorted(head, &local_fail_head);
/* all assigned with add_size ? */
if (list_empty(&local_fail_head)) {
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
/* Remove head list from realloc_head list */
list_for_each_entry(dev_res, head, list)
remove_from_list(realloc_head, dev_res->res);
free_list(&save_head);
free_list(head);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
return;
}
/* check failed type */
fail_type = pci_fail_res_type_mask(&local_fail_head);
/* remove not need to be released assigned res from head list etc */
list_for_each_entry_safe(dev_res, tmp_res, head, list)
if (dev_res->res->parent &&
!pci_need_to_release(fail_type, dev_res->res)) {
/* remove it from realloc_head list */
remove_from_list(realloc_head, dev_res->res);
remove_from_list(&save_head, dev_res->res);
list_del(&dev_res->list);
kfree(dev_res);
}
free_list(&local_fail_head);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
/* Release assigned resource */
list_for_each_entry(dev_res, head, list)
if (dev_res->res->parent)
release_resource(dev_res->res);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
/* Restore start/end/flags from saved list */
list_for_each_entry(save_res, &save_head, list) {
struct resource *res = save_res->res;
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
res->start = save_res->start;
res->end = save_res->end;
res->flags = save_res->flags;
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
}
free_list(&save_head);
PCI: try to assign required+option size first We found reassignment can not find a range for one resource, even if the total available range is large enough. bridge b1:02.0 will need 2M+3M bridge b1:03.0 will need 2M+3M so bridge b0:00.0 will get assigned: 4M : [f8000000-f83fffff] later is reassigned to 10M : [f8000000-f9ffffff] b1:02.0 is assigned to 2M : [f8000000-f81fffff] b1:03.0 is assigned to 2M : [f8200000-f83fffff] After that b1:03.0 get chance to be reassigned to [f8200000-f86fffff], but b1:02.0 will not have chance to expand, because b1:03.0 is using in middle one. [ 187.911401] pci 0000:b1:02.0: bridge window [mem 0x00100000-0x002fffff] to [bus b2-b2] add_size 300000 [ 187.920764] pci 0000:b1:03.0: bridge window [mem 0x00100000-0x002fffff] to [bus b3-b3] add_size 300000 [ 187.930129] pci 0000:b1:02.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.938500] pci 0000:b1:03.0: [mem 0x00100000-0x002fffff] get_res_add_size add_size 300000 [ 187.946857] pci 0000:b0:00.0: bridge window [mem 0x00100000-0x004fffff] to [bus b1-b3] add_size 600000 [ 187.956206] pci 0000:b0:00.0: BAR 14: assigned [mem 0xf8000000-0xf83fffff] [ 187.963102] pci 0000:b0:00.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff pref] [ 187.970434] pci 0000:b0:00.0: BAR 14: reassigned [mem 0xf8000000-0xf89fffff] [ 187.977497] pci 0000:b1:02.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 187.984383] pci 0000:b1:02.0: BAR 15: assigned [mem 0xf5000000-0xf50fffff pref] [ 187.991695] pci 0000:b1:03.0: BAR 14: assigned [mem 0xf8200000-0xf83fffff] [ 187.998576] pci 0000:b1:03.0: BAR 15: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.005888] pci 0000:b1:03.0: BAR 14: reassigned [mem 0xf8200000-0xf86fffff] [ 188.012939] pci 0000:b1:02.0: BAR 14: can't assign mem (size 0x200000) [ 188.019471] pci 0000:b1:02.0: failed to add 300000 to res=[mem 0xf8000000-0xf81fffff] [ 188.027326] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.034071] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.040795] pci 0000:b2:00.0: BAR 2: assigned [mem 0xf8000000-0xf80fffff 64bit] [ 188.048119] pci 0000:b2:00.0: BAR 2: set to [mem 0xf8000000-0xf80fffff 64bit] (PCI address [0xf8000000-0xf80fffff]) [ 188.058550] pci 0000:b2:00.0: BAR 6: assigned [mem 0xf5000000-0xf50fffff pref] [ 188.065802] pci 0000:b2:00.0: BAR 0: assigned [mem 0xf8100000-0xf8103fff 64bit] [ 188.073125] pci 0000:b2:00.0: BAR 0: set to [mem 0xf8100000-0xf8103fff 64bit] (PCI address [0xf8100000-0xf8103fff]) [ 188.083596] pci 0000:b2:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.090310] pci 0000:b2:00.0: BAR 9: can't assign mem (size 0x300000) [ 188.096773] pci 0000:b2:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.103479] pci 0000:b2:00.0: BAR 7: assigned [mem 0xf8104000-0xf810ffff 64bit] [ 188.110801] pci 0000:b2:00.0: BAR 7: set to [mem 0xf8104000-0xf810ffff 64bit] (PCI address [0xf8104000-0xf810ffff]) [ 188.121256] pci 0000:b1:02.0: PCI bridge to [bus b2-b2] [ 188.126512] pci 0000:b1:02.0: bridge window [mem 0xf8000000-0xf81fffff] [ 188.133328] pci 0000:b1:02.0: bridge window [mem 0xf5000000-0xf50fffff pref] [ 188.140608] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.147341] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.154076] pci 0000:b3:00.0: BAR 2: assigned [mem 0xf8200000-0xf82fffff 64bit] [ 188.161417] pci 0000:b3:00.0: BAR 2: set to [mem 0xf8200000-0xf82fffff 64bit] (PCI address [0xf8200000-0xf82fffff]) [ 188.171865] pci 0000:b3:00.0: BAR 6: assigned [mem 0xf5100000-0xf51fffff pref] [ 188.179090] pci 0000:b3:00.0: BAR 0: assigned [mem 0xf8300000-0xf8303fff 64bit] [ 188.186431] pci 0000:b3:00.0: BAR 0: set to [mem 0xf8300000-0xf8303fff 64bit] (PCI address [0xf8300000-0xf8303fff]) [ 188.196884] pci 0000:b3:00.0: reg 18c: [mem 0x00000000-0x000fffff 64bit] [ 188.203591] pci 0000:b3:00.0: BAR 9: assigned [mem 0xf8400000-0xf86fffff 64bit] [ 188.210909] pci 0000:b3:00.0: BAR 9: set to [mem 0xf8400000-0xf86fffff 64bit] (PCI address [0xf8400000-0xf86fffff]) [ 188.221379] pci 0000:b3:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit] [ 188.228089] pci 0000:b3:00.0: BAR 7: assigned [mem 0xf8304000-0xf830ffff 64bit] [ 188.235407] pci 0000:b3:00.0: BAR 7: set to [mem 0xf8304000-0xf830ffff 64bit] (PCI address [0xf8304000-0xf830ffff]) [ 188.245843] pci 0000:b1:03.0: PCI bridge to [bus b3-b3] [ 188.251107] pci 0000:b1:03.0: bridge window [mem 0xf8200000-0xf86fffff] [ 188.257922] pci 0000:b1:03.0: bridge window [mem 0xf5100000-0xf51fffff pref] [ 188.265180] pci 0000:b0:00.0: PCI bridge to [bus b1-b3] [ 188.270443] pci 0000:b0:00.0: bridge window [mem 0xf8000000-0xf89fffff] [ 188.277250] pci 0000:b0:00.0: bridge window [mem 0xf5000000-0xf51fffff pref] [ 188.284512] pcieport 0000:80:02.2: PCI bridge to [bus b0-bf] [ 188.290184] pcieport 0000:80:02.2: bridge window [io 0xa000-0xbfff] [ 188.296735] pcieport 0000:80:02.2: bridge window [mem 0xf8000000-0xf8ffffff] [ 188.303963] pcieport 0000:80:02.2: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref] Thus b2:00.0 BAR 9 does not get assigned... root cause: b1:02.0 can not be added more range, because b1:03.0 is just after it; no space between the required ranges. Solution: Try to assign required + optional all together at first, and if that fails, try again with just the required resources. -v2: seperate add_to_list change() to another patch according to Jesse. seperate get_res_add_size() moving to another patch according to Jesse. add !realloc_head->next check if the list is empty to bail early according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:20 +08:00
requested_and_reassign:
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
/* Satisfy the must-have resource requests */
assign_requested_resources_sorted(head, fail_head);
/* Try to satisfy any additional optional resource
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
requests */
if (realloc_head)
reassign_resources_sorted(realloc_head, head);
free_list(head);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
}
static void pdev_assign_resources_sorted(struct pci_dev *dev,
struct list_head *add_head,
struct list_head *fail_head)
{
LIST_HEAD(head);
__dev_sort_resources(dev, &head);
__assign_resources_sorted(&head, add_head, fail_head);
}
static void pbus_assign_resources_sorted(const struct pci_bus *bus,
struct list_head *realloc_head,
struct list_head *fail_head)
{
struct pci_dev *dev;
LIST_HEAD(head);
list_for_each_entry(dev, &bus->devices, bus_list)
__dev_sort_resources(dev, &head);
__assign_resources_sorted(&head, realloc_head, fail_head);
}
void pci_setup_cardbus(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
struct resource *res;
struct pci_bus_region region;
dev_info(&bridge->dev, "CardBus bridge to %pR\n",
&bus->busn_res);
res = bus->resource[0];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_IO) {
/*
* The IO resource is allocated a range twice as large as it
* would normally need. This allows us to set both IO regs.
*/
dev_info(&bridge->dev, " bridge window %pR\n", res);
pci_write_config_dword(bridge, PCI_CB_IO_BASE_0,
region.start);
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_0,
region.end);
}
res = bus->resource[1];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_IO) {
dev_info(&bridge->dev, " bridge window %pR\n", res);
pci_write_config_dword(bridge, PCI_CB_IO_BASE_1,
region.start);
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_1,
region.end);
}
res = bus->resource[2];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_MEM) {
dev_info(&bridge->dev, " bridge window %pR\n", res);
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0,
region.start);
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_0,
region.end);
}
res = bus->resource[3];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_MEM) {
dev_info(&bridge->dev, " bridge window %pR\n", res);
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1,
region.start);
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_1,
region.end);
}
}
EXPORT_SYMBOL(pci_setup_cardbus);
/* Initialize bridges with base/limit values we have collected.
PCI-to-PCI Bridge Architecture Specification rev. 1.1 (1998)
requires that if there is no I/O ports or memory behind the
bridge, corresponding range must be turned off by writing base
value greater than limit to the bridge's base/limit registers.
Note: care must be taken when updating I/O base/limit registers
of bridges which support 32-bit I/O. This update requires two
config space writes, so it's quite possible that an I/O window of
the bridge will have some undesirable address (e.g. 0) after the
first write. Ditto 64-bit prefetchable MMIO. */
static void pci_setup_bridge_io(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
struct resource *res;
struct pci_bus_region region;
unsigned long io_mask;
u8 io_base_lo, io_limit_lo;
u16 l;
u32 io_upper16;
io_mask = PCI_IO_RANGE_MASK;
if (bridge->io_window_1k)
io_mask = PCI_IO_1K_RANGE_MASK;
/* Set up the top and bottom of the PCI I/O segment for this bus. */
res = bus->resource[0];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_IO) {
pci_read_config_word(bridge, PCI_IO_BASE, &l);
io_base_lo = (region.start >> 8) & io_mask;
io_limit_lo = (region.end >> 8) & io_mask;
l = ((u16) io_limit_lo << 8) | io_base_lo;
/* Set up upper 16 bits of I/O base/limit. */
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
dev_info(&bridge->dev, " bridge window %pR\n", res);
} else {
/* Clear upper 16 bits of I/O base/limit. */
io_upper16 = 0;
l = 0x00f0;
}
/* Temporarily disable the I/O range before updating PCI_IO_BASE. */
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0x0000ffff);
/* Update lower 16 bits of I/O base/limit. */
pci_write_config_word(bridge, PCI_IO_BASE, l);
/* Update upper 16 bits of I/O base/limit. */
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
}
static void pci_setup_bridge_mmio(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
struct resource *res;
struct pci_bus_region region;
u32 l;
/* Set up the top and bottom of the PCI Memory segment for this bus. */
res = bus->resource[1];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_MEM) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
dev_info(&bridge->dev, " bridge window %pR\n", res);
} else {
l = 0x0000fff0;
}
pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
}
static void pci_setup_bridge_mmio_pref(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
struct resource *res;
struct pci_bus_region region;
u32 l, bu, lu;
/* Clear out the upper 32 bits of PREF limit.
If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily
disables PREF range, which is ok. */
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
/* Set up PREF base/limit. */
bu = lu = 0;
res = bus->resource[2];
pcibios_resource_to_bus(bridge->bus, &region, res);
if (res->flags & IORESOURCE_PREFETCH) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
if (res->flags & IORESOURCE_MEM_64) {
bu = upper_32_bits(region.start);
lu = upper_32_bits(region.end);
}
dev_info(&bridge->dev, " bridge window %pR\n", res);
} else {
l = 0x0000fff0;
}
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
/* Set the upper 32 bits of PREF base & limit. */
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
}
static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type)
{
struct pci_dev *bridge = bus->self;
dev_info(&bridge->dev, "PCI bridge to %pR\n",
&bus->busn_res);
if (type & IORESOURCE_IO)
pci_setup_bridge_io(bus);
if (type & IORESOURCE_MEM)
pci_setup_bridge_mmio(bus);
if (type & IORESOURCE_PREFETCH)
pci_setup_bridge_mmio_pref(bus);
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
}
void pci_setup_bridge(struct pci_bus *bus)
{
unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
__pci_setup_bridge(bus, type);
}
/* Check whether the bridge supports optional I/O and
prefetchable memory ranges. If not, the respective
base/limit registers must be read-only and read as 0. */
pci: do not mark exported functions as __devinit Functions marked __devinit will be removed after kernel init. But being exported they are potentially called by a module much later. So the safer choice seems to be to keep the function even in the non CONFIG_HOTPLUG case. This silence the follwoing section mismatch warnings: WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_device from __ksymtab_gpl between '__ksymtab_pci_bus_add_device' (at offset 0x20) and '__ksymtab_pci_walk_bus' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_create_bus from __ksymtab_gpl between '__ksymtab_pci_create_bus' (at offset 0x40) and '__ksymtab_pci_stop_bus_device' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_max_busnr from __ksymtab_gpl between '__ksymtab_pci_bus_max_busnr' (at offset 0xc0) and '__ksymtab_pci_assign_resource_fixed' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_claim_resource from __ksymtab_gpl between '__ksymtab_pci_claim_resource' (at offset 0xe0) and '__ksymtab_pcie_port_bus_type' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_devices from __ksymtab between '__ksymtab_pci_bus_add_devices' (at offset 0x70) and '__ksymtab_pci_bus_alloc_resource' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_scan_bus_parented from __ksymtab between '__ksymtab_pci_scan_bus_parented' (at offset 0x90) and '__ksymtab_pci_root_buses' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_assign_resources from __ksymtab between '__ksymtab_pci_bus_assign_resources' (at offset 0x4d0) and '__ksymtab_pci_bus_size_bridges' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_size_bridges from __ksymtab between '__ksymtab_pci_bus_size_bridges' (at offset 0x4e0) and '__ksymtab_pci_setup_cardbus' Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-27 13:53:30 +08:00
static void pci_bridge_check_ranges(struct pci_bus *bus)
{
u16 io;
u32 pmem;
struct pci_dev *bridge = bus->self;
struct resource *b_res;
b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
b_res[1].flags |= IORESOURCE_MEM;
pci_read_config_word(bridge, PCI_IO_BASE, &io);
if (!io) {
pci_write_config_word(bridge, PCI_IO_BASE, 0xe0f0);
pci_read_config_word(bridge, PCI_IO_BASE, &io);
pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
}
if (io)
b_res[0].flags |= IORESOURCE_IO;
/* DECchip 21050 pass 2 errata: the bridge may miss an address
disconnect boundary by one PCI data phase.
Workaround: do not use prefetching on this device. */
if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001)
return;
pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
if (!pmem) {
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE,
0xffe0fff0);
pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
}
if (pmem) {
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
if ((pmem & PCI_PREF_RANGE_TYPE_MASK) ==
PCI_PREF_RANGE_TYPE_64) {
b_res[2].flags |= IORESOURCE_MEM_64;
b_res[2].flags |= PCI_PREF_RANGE_TYPE_64;
}
}
/* double check if bridge does support 64 bit pref */
if (b_res[2].flags & IORESOURCE_MEM_64) {
u32 mem_base_hi, tmp;
pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32,
&mem_base_hi);
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
0xffffffff);
pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
if (!tmp)
b_res[2].flags &= ~IORESOURCE_MEM_64;
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
mem_base_hi);
}
}
/* Helper function for sizing routines: find first available
bus resource of a given type. Note: we intentionally skip
the bus resources which have already been assigned (that is,
have non-NULL parent resource). */
pci: do not mark exported functions as __devinit Functions marked __devinit will be removed after kernel init. But being exported they are potentially called by a module much later. So the safer choice seems to be to keep the function even in the non CONFIG_HOTPLUG case. This silence the follwoing section mismatch warnings: WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_device from __ksymtab_gpl between '__ksymtab_pci_bus_add_device' (at offset 0x20) and '__ksymtab_pci_walk_bus' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_create_bus from __ksymtab_gpl between '__ksymtab_pci_create_bus' (at offset 0x40) and '__ksymtab_pci_stop_bus_device' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_max_busnr from __ksymtab_gpl between '__ksymtab_pci_bus_max_busnr' (at offset 0xc0) and '__ksymtab_pci_assign_resource_fixed' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_claim_resource from __ksymtab_gpl between '__ksymtab_pci_claim_resource' (at offset 0xe0) and '__ksymtab_pcie_port_bus_type' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_devices from __ksymtab between '__ksymtab_pci_bus_add_devices' (at offset 0x70) and '__ksymtab_pci_bus_alloc_resource' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_scan_bus_parented from __ksymtab between '__ksymtab_pci_scan_bus_parented' (at offset 0x90) and '__ksymtab_pci_root_buses' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_assign_resources from __ksymtab between '__ksymtab_pci_bus_assign_resources' (at offset 0x4d0) and '__ksymtab_pci_bus_size_bridges' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_size_bridges from __ksymtab between '__ksymtab_pci_bus_size_bridges' (at offset 0x4e0) and '__ksymtab_pci_setup_cardbus' Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-27 13:53:30 +08:00
static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned long type)
{
int i;
struct resource *r;
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
pci_bus_for_each_resource(bus, r, i) {
if (r == &ioport_resource || r == &iomem_resource)
continue;
if (r && (r->flags & type_mask) == type && !r->parent)
return r;
}
return NULL;
}
static resource_size_t calculate_iosize(resource_size_t size,
resource_size_t min_size,
resource_size_t size1,
resource_size_t old_size,
resource_size_t align)
{
if (size < min_size)
size = min_size;
if (old_size == 1 )
old_size = 0;
/* To be fixed in 2.5: we should have sort of HAVE_ISA
flag in the struct pci_bus. */
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
size = (size & 0xff) + ((size & ~0xffUL) << 2);
#endif
size = ALIGN(size + size1, align);
if (size < old_size)
size = old_size;
return size;
}
static resource_size_t calculate_memsize(resource_size_t size,
resource_size_t min_size,
resource_size_t size1,
resource_size_t old_size,
resource_size_t align)
{
if (size < min_size)
size = min_size;
if (old_size == 1 )
old_size = 0;
if (size < old_size)
size = old_size;
size = ALIGN(size + size1, align);
return size;
}
resource_size_t __weak pcibios_window_alignment(struct pci_bus *bus,
unsigned long type)
{
return 1;
}
#define PCI_P2P_DEFAULT_MEM_ALIGN 0x100000 /* 1MiB */
#define PCI_P2P_DEFAULT_IO_ALIGN 0x1000 /* 4KiB */
#define PCI_P2P_DEFAULT_IO_ALIGN_1K 0x400 /* 1KiB */
static resource_size_t window_alignment(struct pci_bus *bus,
unsigned long type)
{
resource_size_t align = 1, arch_align;
if (type & IORESOURCE_MEM)
align = PCI_P2P_DEFAULT_MEM_ALIGN;
else if (type & IORESOURCE_IO) {
/*
* Per spec, I/O windows are 4K-aligned, but some
* bridges have an extension to support 1K alignment.
*/
if (bus->self->io_window_1k)
align = PCI_P2P_DEFAULT_IO_ALIGN_1K;
else
align = PCI_P2P_DEFAULT_IO_ALIGN;
}
arch_align = pcibios_window_alignment(bus, type);
return max(align, arch_align);
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
/**
* pbus_size_io() - size the io window of a given bus
*
* @bus : the bus
* @min_size : the minimum io window that must to be allocated
* @add_size : additional optional io window
* @realloc_head : track the additional io window on this list
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
*
* Sizing the IO windows of the PCI-PCI bridge is trivial,
* since these windows have 1K or 4K granularity and the IO ranges
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
* of non-bridge PCI devices are limited to 256 bytes.
* We must be careful with the ISA aliasing though.
*/
static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
resource_size_t add_size, struct list_head *realloc_head)
{
struct pci_dev *dev;
struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO);
resource_size_t size = 0, size0 = 0, size1 = 0;
resource_size_t children_add_size = 0;
resource_size_t min_align, align;
if (!b_res)
return;
min_align = window_alignment(bus, IORESOURCE_IO);
list_for_each_entry(dev, &bus->devices, bus_list) {
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
unsigned long r_size;
if (r->parent || !(r->flags & IORESOURCE_IO))
continue;
r_size = resource_size(r);
if (r_size < 0x400)
/* Might be re-aligned for ISA */
size += r_size;
else
size1 += r_size;
align = pci_resource_alignment(dev, r);
if (align > min_align)
min_align = align;
if (realloc_head)
children_add_size += get_res_add_size(realloc_head, r);
}
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
size0 = calculate_iosize(size, min_size, size1,
resource_size(b_res), min_align);
if (children_add_size > add_size)
add_size = children_add_size;
size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
PCI : Calculate right add_size During debug of one SRIOV enabled hotplug device, we found found that add_size is not passed properly. The device has devices under two level bridges: +-[0000:80]-+-00.0-[81-8f]-- | +-01.0-[90-9f]-- | +-02.0-[a0-af]----00.0-[a1-a3]--+-02.0-[a2]--+-00.0 Oracle Corporation Device | | \-03.0-[a3]--+-00.0 Oracle Corporation Device Which means later the parent bridge will not try to add a big enough range: [ 557.455077] pci 0000:a0:00.0: BAR 14: assigned [mem 0xf9000000-0xf93fffff] [ 557.461974] pci 0000:a0:00.0: BAR 15: assigned [mem 0xf6000000-0xf61fffff pref] [ 557.469340] pci 0000:a1:02.0: BAR 14: assigned [mem 0xf9000000-0xf91fffff] [ 557.476231] pci 0000:a1:02.0: BAR 15: assigned [mem 0xf6000000-0xf60fffff pref] [ 557.483582] pci 0000:a1:03.0: BAR 14: assigned [mem 0xf9200000-0xf93fffff] [ 557.490468] pci 0000:a1:03.0: BAR 15: assigned [mem 0xf6100000-0xf61fffff pref] [ 557.497833] pci 0000:a1:03.0: BAR 14: can't assign mem (size 0x200000) [ 557.504378] pci 0000:a1:03.0: failed to add optional resources res=[mem 0xf9200000-0xf93fffff] [ 557.513026] pci 0000:a1:02.0: BAR 14: can't assign mem (size 0x200000) [ 557.519578] pci 0000:a1:02.0: failed to add optional resources res=[mem 0xf9000000-0xf91fffff] It turns out we did not calculate size1 properly. static resource_size_t calculate_memsize(resource_size_t size, resource_size_t min_size, resource_size_t size1, resource_size_t old_size, resource_size_t align) { if (size < min_size) size = min_size; if (old_size == 1 ) old_size = 0; if (size < old_size) size = old_size; size = ALIGN(size + size1, align); return size; } We should not pass add_size with min_size in calculate_memsize since that will make add_size not contribute final add_size. So just pass add_size with size1 to calculate_memsize(). With this change, we should have chance to remove extra addon in pci_reassign_resource. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:17 +08:00
calculate_iosize(size, min_size, add_size + size1,
resource_size(b_res), min_align);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
if (!size0 && !size1) {
if (b_res->start || b_res->end)
dev_info(&bus->self->dev, "disabling bridge window "
"%pR to %pR (unused)\n", b_res,
&bus->busn_res);
b_res->flags = 0;
return;
}
b_res->start = min_align;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
b_res->end = b_res->start + size0 - 1;
PCI: clean up resource alignment management Done per Linus' request and suggestions. Linus has explained that better than I'll be able to explain: On Thu, Mar 27, 2008 at 10:12:10AM -0700, Linus Torvalds wrote: > Actually, before we go any further, there might be a less intrusive > alternative: add just a couple of flags to the resource flags field (we > still have something like 8 unused bits on 32-bit), and use those to > implement a generic "resource_alignment()" routine. > > Two flags would do it: > > - IORESOURCE_SIZEALIGN: size indicates alignment (regular PCI device > resources) > > - IORESOURCE_STARTALIGN: start field is alignment (PCI bus resources > during probing) > > and then the case of both flags zero (or both bits set) would actually be > "invalid", and we would also clear the IORESOURCE_STARTALIGN flag when we > actually allocate the resource (so that we don't use the "start" field as > alignment incorrectly when it no longer indicates alignment). > > That wouldn't be totally generic, but it would have the nice property of > automatically at least add sanity checking for that whole "res->start has > the odd meaning of 'alignment' during probing" and remove the need for a > new field, and it would allow us to have a generic "resource_alignment()" > routine that just gets a resource pointer. Besides, I removed IORESOURCE_BUS_HAS_VGA flag which was unused for ages. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-30 23:50:14 +08:00
b_res->flags |= IORESOURCE_STARTALIGN;
if (size1 > size0 && realloc_head) {
add_to_list(realloc_head, bus->self, b_res, size1-size0,
min_align);
dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window "
"%pR to %pR add_size %llx\n", b_res,
&bus->busn_res,
(unsigned long long)size1-size0);
}
}
static inline resource_size_t calculate_mem_align(resource_size_t *aligns,
int max_order)
{
resource_size_t align = 0;
resource_size_t min_align = 0;
int order;
for (order = 0; order <= max_order; order++) {
resource_size_t align1 = 1;
align1 <<= (order + 20);
if (!align)
min_align = align1;
else if (ALIGN(align + min_align, min_align) < align1)
min_align = align1 >> 1;
align += aligns[order];
}
return min_align;
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
/**
* pbus_size_mem() - size the memory window of a given bus
*
* @bus : the bus
* @mask: mask the resource flag, then compare it with type
* @type: the type of free resource from bridge
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
* @min_size : the minimum memory window that must to be allocated
* @add_size : additional optional memory window
* @realloc_head : track the additional memory window on this list
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
*
* Calculate the size of the bus and minimal alignment which
* guarantees that all child resources fit in this size.
*/
static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
unsigned long type, resource_size_t min_size,
resource_size_t add_size,
struct list_head *realloc_head)
{
struct pci_dev *dev;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
resource_size_t min_align, align, size, size0, size1;
resource_size_t aligns[14]; /* Alignments from 1Mb to 8Gb */
int order, max_order;
struct resource *b_res = find_free_bus_resource(bus, type);
unsigned int mem64_mask = 0;
resource_size_t children_add_size = 0;
if (!b_res)
return 0;
memset(aligns, 0, sizeof(aligns));
max_order = 0;
size = 0;
mem64_mask = b_res->flags & IORESOURCE_MEM_64;
b_res->flags &= ~IORESOURCE_MEM_64;
list_for_each_entry(dev, &bus->devices, bus_list) {
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
resource_size_t r_size;
if (r->parent || (r->flags & mask) != type)
continue;
r_size = resource_size(r);
#ifdef CONFIG_PCI_IOV
/* put SRIOV requested res to the optional list */
if (realloc_head && i >= PCI_IOV_RESOURCES &&
i <= PCI_IOV_RESOURCE_END) {
r->end = r->start - 1;
add_to_list(realloc_head, dev, r, r_size, 0/* don't care */);
children_add_size += r_size;
continue;
}
#endif
/*
* aligns[0] is for 1MB (since bridge memory
* windows are always at least 1MB aligned), so
* keep "order" from being negative for smaller
* resources.
*/
PCI SR-IOV: correct broken resource alignment calculations An SR-IOV capable device includes an SR-IOV PCIe capability which describes the Virtual Function (VF) BAR requirements. A typical SR-IOV device can support multiple VFs whose BARs must be in a contiguous region, effectively an array of VF BARs. The BAR reports the size requirement for a single VF. We calculate the full range needed by simply multiplying the VF BAR size with the number of possible VFs and create a resource spanning the full range. This all seems sane enough except it artificially inflates the alignment requirement for the VF BAR. The VF BAR need only be aligned to the size of a single BAR not the contiguous range of VF BARs. This can cause us to fail to allocate resources for the BAR despite the fact that we actually have enough space. This patch adds a thin PCI specific layer over the generic resource_alignment() function which is aware of the special nature of VF BARs and does sorting and allocation based on the smaller alignment requirement. I recognize that while resource_alignment is generic, it's basically a PCI helper. An alternative to this patch is to add PCI VF BAR specific information to struct resource. I opted for the extra layer rather than adding such PCI specific information to struct resource. This does have the slight downside that we don't cache the BAR size and re-read for each alignment query (happens a small handful of times during boot for each VF BAR). Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Yu Zhao <yu.zhao@intel.com> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-29 04:00:06 +08:00
align = pci_resource_alignment(dev, r);
order = __ffs(align) - 20;
if (order < 0)
order = 0;
if (order >= ARRAY_SIZE(aligns)) {
dev_warn(&dev->dev, "disabling BAR %d: %pR "
"(bad alignment %#llx)\n", i, r,
(unsigned long long) align);
r->flags = 0;
continue;
}
size += r_size;
/* Exclude ranges with size > align from
calculation of the alignment. */
if (r_size == align)
aligns[order] += align;
if (order > max_order)
max_order = order;
mem64_mask &= r->flags & IORESOURCE_MEM_64;
if (realloc_head)
children_add_size += get_res_add_size(realloc_head, r);
}
}
min_align = calculate_mem_align(aligns, max_order);
min_align = max(min_align, window_alignment(bus, b_res->flags));
size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), min_align);
if (children_add_size > add_size)
add_size = children_add_size;
size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
PCI : Calculate right add_size During debug of one SRIOV enabled hotplug device, we found found that add_size is not passed properly. The device has devices under two level bridges: +-[0000:80]-+-00.0-[81-8f]-- | +-01.0-[90-9f]-- | +-02.0-[a0-af]----00.0-[a1-a3]--+-02.0-[a2]--+-00.0 Oracle Corporation Device | | \-03.0-[a3]--+-00.0 Oracle Corporation Device Which means later the parent bridge will not try to add a big enough range: [ 557.455077] pci 0000:a0:00.0: BAR 14: assigned [mem 0xf9000000-0xf93fffff] [ 557.461974] pci 0000:a0:00.0: BAR 15: assigned [mem 0xf6000000-0xf61fffff pref] [ 557.469340] pci 0000:a1:02.0: BAR 14: assigned [mem 0xf9000000-0xf91fffff] [ 557.476231] pci 0000:a1:02.0: BAR 15: assigned [mem 0xf6000000-0xf60fffff pref] [ 557.483582] pci 0000:a1:03.0: BAR 14: assigned [mem 0xf9200000-0xf93fffff] [ 557.490468] pci 0000:a1:03.0: BAR 15: assigned [mem 0xf6100000-0xf61fffff pref] [ 557.497833] pci 0000:a1:03.0: BAR 14: can't assign mem (size 0x200000) [ 557.504378] pci 0000:a1:03.0: failed to add optional resources res=[mem 0xf9200000-0xf93fffff] [ 557.513026] pci 0000:a1:02.0: BAR 14: can't assign mem (size 0x200000) [ 557.519578] pci 0000:a1:02.0: failed to add optional resources res=[mem 0xf9000000-0xf91fffff] It turns out we did not calculate size1 properly. static resource_size_t calculate_memsize(resource_size_t size, resource_size_t min_size, resource_size_t size1, resource_size_t old_size, resource_size_t align) { if (size < min_size) size = min_size; if (old_size == 1 ) old_size = 0; if (size < old_size) size = old_size; size = ALIGN(size + size1, align); return size; } We should not pass add_size with min_size in calculate_memsize since that will make add_size not contribute final add_size. So just pass add_size with size1 to calculate_memsize(). With this change, we should have chance to remove extra addon in pci_reassign_resource. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-21 18:08:17 +08:00
calculate_memsize(size, min_size, add_size,
resource_size(b_res), min_align);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
if (!size0 && !size1) {
if (b_res->start || b_res->end)
dev_info(&bus->self->dev, "disabling bridge window "
"%pR to %pR (unused)\n", b_res,
&bus->busn_res);
b_res->flags = 0;
return 1;
}
b_res->start = min_align;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
b_res->end = size0 + min_align - 1;
b_res->flags |= IORESOURCE_STARTALIGN | mem64_mask;
if (size1 > size0 && realloc_head) {
add_to_list(realloc_head, bus->self, b_res, size1-size0, min_align);
dev_printk(KERN_DEBUG, &bus->self->dev, "bridge window "
"%pR to %pR add_size %llx\n", b_res,
&bus->busn_res, (unsigned long long)size1-size0);
}
return 1;
}
unsigned long pci_cardbus_resource_alignment(struct resource *res)
{
if (res->flags & IORESOURCE_IO)
return pci_cardbus_io_size;
if (res->flags & IORESOURCE_MEM)
return pci_cardbus_mem_size;
return 0;
}
static void pci_bus_size_cardbus(struct pci_bus *bus,
struct list_head *realloc_head)
{
struct pci_dev *bridge = bus->self;
struct resource *b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
resource_size_t b_res_3_size = pci_cardbus_mem_size * 2;
u16 ctrl;
if (b_res[0].parent)
goto handle_b_res_1;
/*
* Reserve some resources for CardBus. We reserve
* a fixed amount of bus space for CardBus bridges.
*/
b_res[0].start = pci_cardbus_io_size;
b_res[0].end = b_res[0].start + pci_cardbus_io_size - 1;
b_res[0].flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[0].end -= pci_cardbus_io_size;
add_to_list(realloc_head, bridge, b_res, pci_cardbus_io_size,
pci_cardbus_io_size);
}
handle_b_res_1:
if (b_res[1].parent)
goto handle_b_res_2;
b_res[1].start = pci_cardbus_io_size;
b_res[1].end = b_res[1].start + pci_cardbus_io_size - 1;
b_res[1].flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[1].end -= pci_cardbus_io_size;
add_to_list(realloc_head, bridge, b_res+1, pci_cardbus_io_size,
pci_cardbus_io_size);
}
handle_b_res_2:
/* MEM1 must not be pref mmio */
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM1) {
ctrl &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
pci_write_config_word(bridge, PCI_CB_BRIDGE_CONTROL, ctrl);
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
}
/*
* Check whether prefetchable memory is supported
* by this bridge.
*/
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
if (!(ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0)) {
ctrl |= PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
pci_write_config_word(bridge, PCI_CB_BRIDGE_CONTROL, ctrl);
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
}
if (b_res[2].parent)
goto handle_b_res_3;
/*
* If we have prefetchable memory support, allocate
* two regions. Otherwise, allocate one region of
* twice the size.
*/
if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0) {
b_res[2].start = pci_cardbus_mem_size;
b_res[2].end = b_res[2].start + pci_cardbus_mem_size - 1;
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH |
IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[2].end -= pci_cardbus_mem_size;
add_to_list(realloc_head, bridge, b_res+2,
pci_cardbus_mem_size, pci_cardbus_mem_size);
}
/* reduce that to half */
b_res_3_size = pci_cardbus_mem_size;
}
handle_b_res_3:
if (b_res[3].parent)
goto handle_done;
b_res[3].start = pci_cardbus_mem_size;
b_res[3].end = b_res[3].start + b_res_3_size - 1;
b_res[3].flags |= IORESOURCE_MEM | IORESOURCE_STARTALIGN;
if (realloc_head) {
b_res[3].end -= b_res_3_size;
add_to_list(realloc_head, bridge, b_res+3, b_res_3_size,
pci_cardbus_mem_size);
}
handle_done:
;
}
PCI / ACPI: Use boot-time resource allocation rules during hotplug On x86 platforms, the kernel respects PCI resource assignments from the BIOS and only reassigns resources for unassigned BARs at boot time. However, with the ACPI-based hotplug (acpiphp), it ignores the BIOS' PCI resource assignments completely and reassigns all resources by itself. This causes differences in PCI resource allocation between boot time and runtime hotplug to occur, which is generally undesirable and sometimes actively breaks things. Namely, if there are enough resources, reassigning all PCI resources during runtime hotplug should work, but it may fail if the resources are constrained. This may happen, for instance, when some PCI devices with huge MMIO BARs are involved in the runtime hotplug operations, because the current PCI MMIO alignment algorithm may waste huge chunks of MMIO address space in those cases. On the Alexander's Sony VAIO VPCZ23A4R the BIOS allocates limited MMIO resources for the dock station which contains a device (graphics adapter) with a 256MB MMIO BAR. An attempt to reassign that during runtime hotplug causes the dock station MMIO window to be exhausted and acpiphp fails to allocate resources for the majority of devices on the dock station as a result. To prevent that from happening, modify acpiphp to follow the boot time resources allocation behavior so that the BIOS' resource assignments are respected during runtime hotplug too. [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=56531 Reported-and-tested-by: Alexander E. Patrakov <patrakov@gmail.com> Tested-by: Illya Klymov <xanf@xanf.me> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-23 07:01:35 +08:00
void __ref __pci_bus_size_bridges(struct pci_bus *bus,
struct list_head *realloc_head)
{
struct pci_dev *dev;
unsigned long mask, prefmask;
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
resource_size_t additional_mem_size = 0, additional_io_size = 0;
list_for_each_entry(dev, &bus->devices, bus_list) {
struct pci_bus *b = dev->subordinate;
if (!b)
continue;
switch (dev->class >> 8) {
case PCI_CLASS_BRIDGE_CARDBUS:
pci_bus_size_cardbus(b, realloc_head);
break;
case PCI_CLASS_BRIDGE_PCI:
default:
__pci_bus_size_bridges(b, realloc_head);
break;
}
}
/* The root bus? */
if (pci_is_root_bus(bus))
return;
switch (bus->self->class >> 8) {
case PCI_CLASS_BRIDGE_CARDBUS:
/* don't size cardbuses yet. */
break;
case PCI_CLASS_BRIDGE_PCI:
pci_bridge_check_ranges(bus);
if (bus->self->is_hotplug_bridge) {
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
additional_io_size = pci_hotplug_io_size;
additional_mem_size = pci_hotplug_mem_size;
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
/*
* Follow thru
*/
default:
pbus_size_io(bus, realloc_head ? 0 : additional_io_size,
additional_io_size, realloc_head);
/* If the bridge supports prefetchable range, size it
separately. If it doesn't, or its prefetchable window
has already been allocated by arch code, try
non-prefetchable range for both types of PCI memory
resources. */
mask = IORESOURCE_MEM;
prefmask = IORESOURCE_MEM | IORESOURCE_PREFETCH;
if (pbus_size_mem(bus, prefmask, prefmask,
realloc_head ? 0 : additional_mem_size,
additional_mem_size, realloc_head))
mask = prefmask; /* Success, size non-prefetch only. */
else
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
additional_mem_size += additional_mem_size;
pbus_size_mem(bus, mask, IORESOURCE_MEM,
realloc_head ? 0 : additional_mem_size,
additional_mem_size, realloc_head);
break;
}
}
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
void __ref pci_bus_size_bridges(struct pci_bus *bus)
{
__pci_bus_size_bridges(bus, NULL);
}
EXPORT_SYMBOL(pci_bus_size_bridges);
PCI / ACPI: Use boot-time resource allocation rules during hotplug On x86 platforms, the kernel respects PCI resource assignments from the BIOS and only reassigns resources for unassigned BARs at boot time. However, with the ACPI-based hotplug (acpiphp), it ignores the BIOS' PCI resource assignments completely and reassigns all resources by itself. This causes differences in PCI resource allocation between boot time and runtime hotplug to occur, which is generally undesirable and sometimes actively breaks things. Namely, if there are enough resources, reassigning all PCI resources during runtime hotplug should work, but it may fail if the resources are constrained. This may happen, for instance, when some PCI devices with huge MMIO BARs are involved in the runtime hotplug operations, because the current PCI MMIO alignment algorithm may waste huge chunks of MMIO address space in those cases. On the Alexander's Sony VAIO VPCZ23A4R the BIOS allocates limited MMIO resources for the dock station which contains a device (graphics adapter) with a 256MB MMIO BAR. An attempt to reassign that during runtime hotplug causes the dock station MMIO window to be exhausted and acpiphp fails to allocate resources for the majority of devices on the dock station as a result. To prevent that from happening, modify acpiphp to follow the boot time resources allocation behavior so that the BIOS' resource assignments are respected during runtime hotplug too. [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=56531 Reported-and-tested-by: Alexander E. Patrakov <patrakov@gmail.com> Tested-by: Illya Klymov <xanf@xanf.me> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-23 07:01:35 +08:00
void __ref __pci_bus_assign_resources(const struct pci_bus *bus,
struct list_head *realloc_head,
struct list_head *fail_head)
{
struct pci_bus *b;
struct pci_dev *dev;
pbus_assign_resources_sorted(bus, realloc_head, fail_head);
list_for_each_entry(dev, &bus->devices, bus_list) {
b = dev->subordinate;
if (!b)
continue;
__pci_bus_assign_resources(b, realloc_head, fail_head);
switch (dev->class >> 8) {
case PCI_CLASS_BRIDGE_PCI:
if (!pci_is_enabled(dev))
pci_setup_bridge(b);
break;
case PCI_CLASS_BRIDGE_CARDBUS:
pci_setup_cardbus(b);
break;
default:
dev_info(&dev->dev, "not setting up bridge for bus "
"%04x:%02x\n", pci_domain_nr(b), b->number);
break;
}
}
}
void __ref pci_bus_assign_resources(const struct pci_bus *bus)
{
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
__pci_bus_assign_resources(bus, NULL, NULL);
}
EXPORT_SYMBOL(pci_bus_assign_resources);
static void __ref __pci_bridge_assign_resources(const struct pci_dev *bridge,
struct list_head *add_head,
struct list_head *fail_head)
{
struct pci_bus *b;
pdev_assign_resources_sorted((struct pci_dev *)bridge,
add_head, fail_head);
b = bridge->subordinate;
if (!b)
return;
__pci_bus_assign_resources(b, add_head, fail_head);
switch (bridge->class >> 8) {
case PCI_CLASS_BRIDGE_PCI:
pci_setup_bridge(b);
break;
case PCI_CLASS_BRIDGE_CARDBUS:
pci_setup_cardbus(b);
break;
default:
dev_info(&bridge->dev, "not setting up bridge for bus "
"%04x:%02x\n", pci_domain_nr(b), b->number);
break;
}
}
static void pci_bridge_release_resources(struct pci_bus *bus,
unsigned long type)
{
int idx;
bool changed = false;
struct pci_dev *dev;
struct resource *r;
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
dev = bus->self;
for (idx = PCI_BRIDGE_RESOURCES; idx <= PCI_BRIDGE_RESOURCE_END;
idx++) {
r = &dev->resource[idx];
if ((r->flags & type_mask) != type)
continue;
if (!r->parent)
continue;
/*
* if there are children under that, we should release them
* all
*/
release_child_resources(r);
if (!release_resource(r)) {
dev_printk(KERN_DEBUG, &dev->dev,
"resource %d %pR released\n", idx, r);
/* keep the old size */
r->end = resource_size(r) - 1;
r->start = 0;
r->flags = 0;
changed = true;
}
}
if (changed) {
/* avoiding touch the one without PREF */
if (type & IORESOURCE_PREFETCH)
type = IORESOURCE_PREFETCH;
__pci_setup_bridge(bus, type);
}
}
enum release_type {
leaf_only,
whole_subtree,
};
/*
* try to release pci bridge resources that is from leaf bridge,
* so we can allocate big new one later
*/
static void __ref pci_bus_release_bridge_resources(struct pci_bus *bus,
unsigned long type,
enum release_type rel_type)
{
struct pci_dev *dev;
bool is_leaf_bridge = true;
list_for_each_entry(dev, &bus->devices, bus_list) {
struct pci_bus *b = dev->subordinate;
if (!b)
continue;
is_leaf_bridge = false;
if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
continue;
if (rel_type == whole_subtree)
pci_bus_release_bridge_resources(b, type,
whole_subtree);
}
if (pci_is_root_bus(bus))
return;
if ((bus->self->class >> 8) != PCI_CLASS_BRIDGE_PCI)
return;
if ((rel_type == whole_subtree) || is_leaf_bridge)
pci_bridge_release_resources(bus, type);
}
static void pci_bus_dump_res(struct pci_bus *bus)
{
struct resource *res;
int i;
pci_bus_for_each_resource(bus, res, i) {
if (!res || !res->end || !res->flags)
continue;
dev_printk(KERN_DEBUG, &bus->dev, "resource %d %pR\n", i, res);
}
}
static void pci_bus_dump_resources(struct pci_bus *bus)
{
struct pci_bus *b;
struct pci_dev *dev;
pci_bus_dump_res(bus);
list_for_each_entry(dev, &bus->devices, bus_list) {
b = dev->subordinate;
if (!b)
continue;
pci_bus_dump_resources(b);
}
}
static int pci_bus_get_depth(struct pci_bus *bus)
{
int depth = 0;
struct pci_bus *child_bus;
list_for_each_entry(child_bus, &bus->children, node){
int ret;
ret = pci_bus_get_depth(child_bus);
if (ret + 1 > depth)
depth = ret + 1;
}
return depth;
}
/*
* -1: undefined, will auto detect later
* 0: disabled by user
* 1: disabled by auto detect
* 2: enabled by user
* 3: enabled by auto detect
*/
enum enable_type {
undefined = -1,
user_disabled,
auto_disabled,
user_enabled,
auto_enabled,
};
static enum enable_type pci_realloc_enable = undefined;
void __init pci_realloc_get_opt(char *str)
{
if (!strncmp(str, "off", 3))
pci_realloc_enable = user_disabled;
else if (!strncmp(str, "on", 2))
pci_realloc_enable = user_enabled;
}
static bool pci_realloc_enabled(enum enable_type enable)
{
return enable >= user_enabled;
}
#if defined(CONFIG_PCI_IOV) && defined(CONFIG_PCI_REALLOC_ENABLE_AUTO)
static int iov_resources_unassigned(struct pci_dev *dev, void *data)
{
int i;
bool *unassigned = data;
for (i = PCI_IOV_RESOURCES; i <= PCI_IOV_RESOURCE_END; i++) {
struct resource *r = &dev->resource[i];
struct pci_bus_region region;
/* Not assigned or rejected by kernel? */
if (!r->flags)
continue;
pcibios_resource_to_bus(dev->bus, &region, r);
if (!region.start) {
*unassigned = true;
return 1; /* return early from pci_walk_bus() */
}
}
return 0;
}
static enum enable_type pci_realloc_detect(struct pci_bus *bus,
enum enable_type enable_local)
{
bool unassigned = false;
if (enable_local != undefined)
return enable_local;
pci_walk_bus(bus, iov_resources_unassigned, &unassigned);
if (unassigned)
return auto_enabled;
return enable_local;
}
#else
static enum enable_type pci_realloc_detect(struct pci_bus *bus,
enum enable_type enable_local)
{
return enable_local;
}
#endif
/*
* first try will not touch pci bridge res
* second and later try will clear small leaf bridge res
* will stop till to the max depth if can not find good one
*/
void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
{
LIST_HEAD(realloc_head); /* list of resources that
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
want additional resources */
struct list_head *add_list = NULL;
int tried_times = 0;
enum release_type rel_type = leaf_only;
LIST_HEAD(fail_head);
struct pci_dev_resource *fail_res;
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
int pci_try_num = 1;
enum enable_type enable_local;
/* don't realloc if asked to do so */
enable_local = pci_realloc_detect(bus, pci_realloc_enable);
if (pci_realloc_enabled(enable_local)) {
int max_depth = pci_bus_get_depth(bus);
pci_try_num = max_depth + 1;
dev_printk(KERN_DEBUG, &bus->dev,
"max bus depth: %d pci_try_num: %d\n",
max_depth, pci_try_num);
}
again:
/*
* last try will use add_list, otherwise will try good to have as
* must have, so can realloc parent bridge resource
*/
if (tried_times + 1 == pci_try_num)
add_list = &realloc_head;
/* Depth first, calculate sizes and alignments of all
subordinate buses. */
__pci_bus_size_bridges(bus, add_list);
PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15 09:43:20 +08:00
/* Depth last, allocate resources and update the hardware. */
__pci_bus_assign_resources(bus, add_list, &fail_head);
if (add_list)
BUG_ON(!list_empty(add_list));
tried_times++;
/* any device complain? */
if (list_empty(&fail_head))
goto dump;
if (tried_times >= pci_try_num) {
if (enable_local == undefined)
dev_info(&bus->dev, "Some PCI device resources are unassigned, try booting with pci=realloc\n");
else if (enable_local == auto_enabled)
dev_info(&bus->dev, "Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off\n");
free_list(&fail_head);
goto dump;
}
dev_printk(KERN_DEBUG, &bus->dev,
"No. %d try to assign unassigned res\n", tried_times + 1);
/* third times and later will not check if it is leaf */
if ((tried_times + 1) > 2)
rel_type = whole_subtree;
/*
* Try to release leaf bridge's resources that doesn't fit resource of
* child device under that bridge
*/
list_for_each_entry(fail_res, &fail_head, list)
pci_bus_release_bridge_resources(fail_res->dev->bus,
fail_res->flags & type_mask,
rel_type);
/* restore size and flags */
list_for_each_entry(fail_res, &fail_head, list) {
struct resource *res = fail_res->res;
res->start = fail_res->start;
res->end = fail_res->end;
res->flags = fail_res->flags;
if (fail_res->dev->subordinate)
res->flags = 0;
}
free_list(&fail_head);
goto again;
dump:
/* dump the resource on buses */
pci_bus_dump_resources(bus);
}
void __init pci_assign_unassigned_resources(void)
{
struct pci_bus *root_bus;
list_for_each_entry(root_bus, &pci_root_buses, node)
pci_assign_unassigned_root_bus_resources(root_bus);
}
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
{
struct pci_bus *parent = bridge->subordinate;
LIST_HEAD(add_list); /* list of resources that
want additional resources */
int tried_times = 0;
LIST_HEAD(fail_head);
struct pci_dev_resource *fail_res;
int retval;
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
again:
__pci_bus_size_bridges(parent, &add_list);
__pci_bridge_assign_resources(bridge, &add_list, &fail_head);
BUG_ON(!list_empty(&add_list));
tried_times++;
if (list_empty(&fail_head))
goto enable_all;
if (tried_times >= 2) {
/* still fail, don't need to try more */
free_list(&fail_head);
goto enable_all;
}
printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
tried_times + 1);
/*
* Try to release leaf bridge's resources that doesn't fit resource of
* child device under that bridge
*/
list_for_each_entry(fail_res, &fail_head, list)
pci_bus_release_bridge_resources(fail_res->dev->bus,
fail_res->flags & type_mask,
whole_subtree);
/* restore size and flags */
list_for_each_entry(fail_res, &fail_head, list) {
struct resource *res = fail_res->res;
res->start = fail_res->start;
res->end = fail_res->end;
res->flags = fail_res->flags;
if (fail_res->dev->subordinate)
res->flags = 0;
}
free_list(&fail_head);
goto again;
enable_all:
retval = pci_reenable_device(bridge);
if (retval)
dev_err(&bridge->dev, "Error reenabling bridge (%d)\n", retval);
pci_set_master(bridge);
}
EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
{
struct pci_dev *dev;
LIST_HEAD(add_list); /* list of resources that
want additional resources */
down_read(&pci_bus_sem);
list_for_each_entry(dev, &bus->devices, bus_list)
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
if (dev->subordinate)
__pci_bus_size_bridges(dev->subordinate,
&add_list);
up_read(&pci_bus_sem);
__pci_bus_assign_resources(bus, &add_list, NULL);
BUG_ON(!list_empty(&add_list));
}