OpenCloudOS-Kernel/arch/m68k/platform/coldfire/m528x.c

138 lines
3.4 KiB
C
Raw Normal View History

/***************************************************************************/
/*
* linux/arch/m68knommu/platform/528x/config.c
*
* Sub-architcture dependent initialization code for the Freescale
* 5280, 5281 and 5282 CPUs.
*
* Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfgpio.h>
/***************************************************************************/
struct mcf_gpio_chip mcf_gpio_chips[] = {
MCFGPS(NQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
MCFGPS(TA, 8, 4, MCFGPTA_GPTDDR, MCFGPTA_GPTPORT, MCFGPTB_GPTPORT),
MCFGPS(TB, 16, 4, MCFGPTB_GPTDDR, MCFGPTB_GPTPORT, MCFGPTB_GPTPORT),
MCFGPS(QA, 24, 4, MCFQADC_DDRQA, MCFQADC_PORTQA, MCFQADC_PORTQA),
MCFGPS(QB, 32, 4, MCFQADC_DDRQB, MCFQADC_PORTQB, MCFQADC_PORTQB),
MCFGPF(A, 40, 8),
MCFGPF(B, 48, 8),
MCFGPF(C, 56, 8),
MCFGPF(D, 64, 8),
MCFGPF(E, 72, 8),
MCFGPF(F, 80, 8),
MCFGPF(G, 88, 8),
MCFGPF(H, 96, 8),
MCFGPF(J, 104, 8),
MCFGPF(DD, 112, 8),
MCFGPF(EH, 120, 8),
MCFGPF(EL, 128, 8),
MCFGPF(AS, 136, 6),
MCFGPF(QS, 144, 7),
MCFGPF(SD, 152, 6),
MCFGPF(TC, 160, 4),
MCFGPF(TD, 168, 4),
MCFGPF(UA, 176, 4),
};
unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
static void __init m528x_qspi_init(void)
{
/* setup Port QS for QSPI with gpio CS control */
__raw_writeb(0x07, MCFGPIO_PQSPAR);
}
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
/***************************************************************************/
static void __init m528x_uarts_init(void)
{
u8 port;
/* make sure PUAPAR is set for UART0 and UART1 */
port = readb(MCF5282_GPIO_PUAPAR);
port |= 0x03 | (0x03 << 2);
writeb(port, MCF5282_GPIO_PUAPAR);
}
/***************************************************************************/
static void __init m528x_fec_init(void)
{
u16 v16;
/* Set multi-function pins to ethernet mode for fec0 */
v16 = readw(MCF_IPSBAR + 0x100056);
writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
writeb(0xc0, MCF_IPSBAR + 0x100058);
}
/***************************************************************************/
#ifdef CONFIG_WILDFIRE
void wildfire_halt(void)
{
writeb(0, 0x30000007);
writeb(0x2, 0x30000007);
}
#endif
#ifdef CONFIG_WILDFIREMOD
void wildfiremod_halt(void)
{
printk(KERN_INFO "WildFireMod hibernating...\n");
/* Set portE.5 to Digital IO */
MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
/* Make portE.5 an output */
MCF5282_GPIO_DDRE |= (1 << 5);
/* Now toggle portE.5 from low to high */
MCF5282_GPIO_PORTE &= ~(1 << 5);
MCF5282_GPIO_PORTE |= (1 << 5);
printk(KERN_EMERG "Failed to hibernate. Halting!\n");
}
#endif
void __init config_BSP(char *commandp, int size)
{
#ifdef CONFIG_WILDFIRE
mach_halt = wildfire_halt;
#endif
#ifdef CONFIG_WILDFIREMOD
mach_halt = wildfiremod_halt;
#endif
mach_sched_init = hw_timer_init;
m528x_uarts_init();
m528x_fec_init();
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
m528x_qspi_init();
#endif
}
/***************************************************************************/