OpenCloudOS-Kernel/block/blk-sysfs.c

962 lines
24 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Functions related to sysfs handling
*/
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/blktrace_api.h>
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
#include <linux/blk-mq.h>
#include <linux/blk-cgroup.h>
#include "blk.h"
#include "blk-mq.h"
#include "blk-mq-debugfs.h"
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
#include "blk-wbt.h"
struct queue_sysfs_entry {
struct attribute attr;
ssize_t (*show)(struct request_queue *, char *);
ssize_t (*store)(struct request_queue *, const char *, size_t);
};
static ssize_t
queue_var_show(unsigned long var, char *page)
{
return sprintf(page, "%lu\n", var);
}
static ssize_t
queue_var_store(unsigned long *var, const char *page, size_t count)
{
int err;
unsigned long v;
err = kstrtoul(page, 10, &v);
if (err || v > UINT_MAX)
return -EINVAL;
*var = v;
return count;
}
static ssize_t queue_var_store64(s64 *var, const char *page)
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
{
int err;
s64 v;
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
err = kstrtos64(page, 10, &v);
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
if (err < 0)
return err;
*var = v;
return 0;
}
static ssize_t queue_requests_show(struct request_queue *q, char *page)
{
return queue_var_show(q->nr_requests, (page));
}
static ssize_t
queue_requests_store(struct request_queue *q, const char *page, size_t count)
{
unsigned long nr;
int ret, err;
if (!q->request_fn && !q->mq_ops)
return -EINVAL;
ret = queue_var_store(&nr, page, count);
if (ret < 0)
return ret;
if (nr < BLKDEV_MIN_RQ)
nr = BLKDEV_MIN_RQ;
if (q->request_fn)
err = blk_update_nr_requests(q, nr);
else
err = blk_mq_update_nr_requests(q, nr);
if (err)
return err;
return ret;
}
static ssize_t queue_ra_show(struct request_queue *q, char *page)
{
unsigned long ra_kb = q->backing_dev_info->ra_pages <<
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
(PAGE_SHIFT - 10);
return queue_var_show(ra_kb, (page));
}
static ssize_t
queue_ra_store(struct request_queue *q, const char *page, size_t count)
{
unsigned long ra_kb;
ssize_t ret = queue_var_store(&ra_kb, page, count);
if (ret < 0)
return ret;
q->backing_dev_info->ra_pages = ra_kb >> (PAGE_SHIFT - 10);
return ret;
}
static ssize_t queue_max_sectors_show(struct request_queue *q, char *page)
{
int max_sectors_kb = queue_max_sectors(q) >> 1;
return queue_var_show(max_sectors_kb, (page));
}
static ssize_t queue_max_segments_show(struct request_queue *q, char *page)
{
return queue_var_show(queue_max_segments(q), (page));
}
static ssize_t queue_max_discard_segments_show(struct request_queue *q,
char *page)
{
return queue_var_show(queue_max_discard_segments(q), (page));
}
static ssize_t queue_max_integrity_segments_show(struct request_queue *q, char *page)
{
return queue_var_show(q->limits.max_integrity_segments, (page));
}
static ssize_t queue_max_segment_size_show(struct request_queue *q, char *page)
{
if (blk_queue_cluster(q))
return queue_var_show(queue_max_segment_size(q), (page));
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
return queue_var_show(PAGE_SIZE, (page));
}
static ssize_t queue_logical_block_size_show(struct request_queue *q, char *page)
{
return queue_var_show(queue_logical_block_size(q), page);
}
static ssize_t queue_physical_block_size_show(struct request_queue *q, char *page)
{
return queue_var_show(queue_physical_block_size(q), page);
}
static ssize_t queue_chunk_sectors_show(struct request_queue *q, char *page)
{
return queue_var_show(q->limits.chunk_sectors, page);
}
static ssize_t queue_io_min_show(struct request_queue *q, char *page)
{
return queue_var_show(queue_io_min(q), page);
}
static ssize_t queue_io_opt_show(struct request_queue *q, char *page)
{
return queue_var_show(queue_io_opt(q), page);
}
static ssize_t queue_discard_granularity_show(struct request_queue *q, char *page)
{
return queue_var_show(q->limits.discard_granularity, page);
}
static ssize_t queue_discard_max_hw_show(struct request_queue *q, char *page)
{
return sprintf(page, "%llu\n",
(unsigned long long)q->limits.max_hw_discard_sectors << 9);
}
static ssize_t queue_discard_max_show(struct request_queue *q, char *page)
{
return sprintf(page, "%llu\n",
(unsigned long long)q->limits.max_discard_sectors << 9);
}
static ssize_t queue_discard_max_store(struct request_queue *q,
const char *page, size_t count)
{
unsigned long max_discard;
ssize_t ret = queue_var_store(&max_discard, page, count);
if (ret < 0)
return ret;
if (max_discard & (q->limits.discard_granularity - 1))
return -EINVAL;
max_discard >>= 9;
if (max_discard > UINT_MAX)
return -EINVAL;
if (max_discard > q->limits.max_hw_discard_sectors)
max_discard = q->limits.max_hw_discard_sectors;
q->limits.max_discard_sectors = max_discard;
return ret;
}
static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *page)
{
return queue_var_show(0, page);
}
static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
{
return sprintf(page, "%llu\n",
(unsigned long long)q->limits.max_write_same_sectors << 9);
}
static ssize_t queue_write_zeroes_max_show(struct request_queue *q, char *page)
{
return sprintf(page, "%llu\n",
(unsigned long long)q->limits.max_write_zeroes_sectors << 9);
}
static ssize_t
queue_max_sectors_store(struct request_queue *q, const char *page, size_t count)
{
unsigned long max_sectors_kb,
max_hw_sectors_kb = queue_max_hw_sectors(q) >> 1,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
page_kb = 1 << (PAGE_SHIFT - 10);
ssize_t ret = queue_var_store(&max_sectors_kb, page, count);
if (ret < 0)
return ret;
block/sd: Fix device-imposed transfer length limits Commit 4f258a46346c ("sd: Fix maximum I/O size for BLOCK_PC requests") had the unfortunate side-effect of removing an implicit clamp to BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer code. This caused problems for some SMR drives. Debugging this issue revealed a few problems with the existing infrastructure since the block layer didn't know how to deal with device-imposed limits, only limits set by the I/O controller. - Introduce a new queue limit, max_dev_sectors, which is used by the ULD to signal the maximum sectors for a REQ_TYPE_FS request. - Ensure that max_dev_sectors is correctly stacked and taken into account when overriding max_sectors through sysfs. - Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer values for later processing. - In sd_revalidate() set the queue's max_dev_sectors based on the MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value is not reported, fall back to a cap based on the CDB TRANSFER LENGTH field size. - In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits VPD--if reported and sane--to signal the preferred device transfer size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS. - blk_limits_max_hw_sectors() is no longer used and can be removed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581 Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: sweeneygj@gmx.com Tested-by: Arzeets <anatol.pomozov@gmail.com> Tested-by: David Eisner <david.eisner@oriel.oxon.org> Tested-by: Mario Kicherer <dev@kicherer.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-14 05:46:48 +08:00
max_hw_sectors_kb = min_not_zero(max_hw_sectors_kb, (unsigned long)
q->limits.max_dev_sectors >> 1);
if (max_sectors_kb > max_hw_sectors_kb || max_sectors_kb < page_kb)
return -EINVAL;
spin_lock_irq(q->queue_lock);
q->limits.max_sectors = max_sectors_kb << 1;
q->backing_dev_info->io_pages = max_sectors_kb >> (PAGE_SHIFT - 10);
spin_unlock_irq(q->queue_lock);
return ret;
}
static ssize_t queue_max_hw_sectors_show(struct request_queue *q, char *page)
{
int max_hw_sectors_kb = queue_max_hw_sectors(q) >> 1;
return queue_var_show(max_hw_sectors_kb, (page));
}
#define QUEUE_SYSFS_BIT_FNS(name, flag, neg) \
static ssize_t \
queue_show_##name(struct request_queue *q, char *page) \
{ \
int bit; \
bit = test_bit(QUEUE_FLAG_##flag, &q->queue_flags); \
return queue_var_show(neg ? !bit : bit, page); \
} \
static ssize_t \
queue_store_##name(struct request_queue *q, const char *page, size_t count) \
{ \
unsigned long val; \
ssize_t ret; \
ret = queue_var_store(&val, page, count); \
if (ret < 0) \
return ret; \
if (neg) \
val = !val; \
\
spin_lock_irq(q->queue_lock); \
if (val) \
queue_flag_set(QUEUE_FLAG_##flag, q); \
else \
queue_flag_clear(QUEUE_FLAG_##flag, q); \
spin_unlock_irq(q->queue_lock); \
return ret; \
}
QUEUE_SYSFS_BIT_FNS(nonrot, NONROT, 1);
QUEUE_SYSFS_BIT_FNS(random, ADD_RANDOM, 0);
QUEUE_SYSFS_BIT_FNS(iostats, IO_STAT, 0);
#undef QUEUE_SYSFS_BIT_FNS
static ssize_t queue_zoned_show(struct request_queue *q, char *page)
{
switch (blk_queue_zoned_model(q)) {
case BLK_ZONED_HA:
return sprintf(page, "host-aware\n");
case BLK_ZONED_HM:
return sprintf(page, "host-managed\n");
default:
return sprintf(page, "none\n");
}
}
static ssize_t queue_nomerges_show(struct request_queue *q, char *page)
{
return queue_var_show((blk_queue_nomerges(q) << 1) |
blk_queue_noxmerges(q), page);
}
static ssize_t queue_nomerges_store(struct request_queue *q, const char *page,
size_t count)
{
unsigned long nm;
ssize_t ret = queue_var_store(&nm, page, count);
if (ret < 0)
return ret;
spin_lock_irq(q->queue_lock);
queue_flag_clear(QUEUE_FLAG_NOMERGES, q);
queue_flag_clear(QUEUE_FLAG_NOXMERGES, q);
if (nm == 2)
queue_flag_set(QUEUE_FLAG_NOMERGES, q);
else if (nm)
queue_flag_set(QUEUE_FLAG_NOXMERGES, q);
spin_unlock_irq(q->queue_lock);
return ret;
}
static ssize_t queue_rq_affinity_show(struct request_queue *q, char *page)
{
bool set = test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags);
bool force = test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags);
return queue_var_show(set << force, page);
}
static ssize_t
queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count)
{
ssize_t ret = -EINVAL;
#ifdef CONFIG_SMP
unsigned long val;
ret = queue_var_store(&val, page, count);
if (ret < 0)
return ret;
spin_lock_irq(q->queue_lock);
if (val == 2) {
queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
queue_flag_set(QUEUE_FLAG_SAME_FORCE, q);
} else if (val == 1) {
queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
} else if (val == 0) {
queue_flag_clear(QUEUE_FLAG_SAME_COMP, q);
queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
}
spin_unlock_irq(q->queue_lock);
#endif
return ret;
}
static ssize_t queue_poll_delay_show(struct request_queue *q, char *page)
{
int val;
if (q->poll_nsec == -1)
val = -1;
else
val = q->poll_nsec / 1000;
return sprintf(page, "%d\n", val);
}
static ssize_t queue_poll_delay_store(struct request_queue *q, const char *page,
size_t count)
{
int err, val;
if (!q->mq_ops || !q->mq_ops->poll)
return -EINVAL;
err = kstrtoint(page, 10, &val);
if (err < 0)
return err;
if (val == -1)
q->poll_nsec = -1;
else
q->poll_nsec = val * 1000;
return count;
}
static ssize_t queue_poll_show(struct request_queue *q, char *page)
{
return queue_var_show(test_bit(QUEUE_FLAG_POLL, &q->queue_flags), page);
}
static ssize_t queue_poll_store(struct request_queue *q, const char *page,
size_t count)
{
unsigned long poll_on;
ssize_t ret;
if (!q->mq_ops || !q->mq_ops->poll)
return -EINVAL;
ret = queue_var_store(&poll_on, page, count);
if (ret < 0)
return ret;
spin_lock_irq(q->queue_lock);
if (poll_on)
queue_flag_set(QUEUE_FLAG_POLL, q);
else
queue_flag_clear(QUEUE_FLAG_POLL, q);
spin_unlock_irq(q->queue_lock);
return ret;
}
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
static ssize_t queue_wb_lat_show(struct request_queue *q, char *page)
{
if (!q->rq_wb)
return -EINVAL;
return sprintf(page, "%llu\n", div_u64(q->rq_wb->min_lat_nsec, 1000));
}
static ssize_t queue_wb_lat_store(struct request_queue *q, const char *page,
size_t count)
{
struct rq_wb *rwb;
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
ssize_t ret;
s64 val;
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
ret = queue_var_store64(&val, page);
if (ret < 0)
return ret;
if (val < -1)
return -EINVAL;
rwb = q->rq_wb;
if (!rwb) {
ret = wbt_init(q);
if (ret)
return ret;
}
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
rwb = q->rq_wb;
if (val == -1)
rwb->min_lat_nsec = wbt_default_latency_nsec(q);
else if (val >= 0)
rwb->min_lat_nsec = val * 1000ULL;
if (rwb->enable_state == WBT_STATE_ON_DEFAULT)
rwb->enable_state = WBT_STATE_ON_MANUAL;
wbt_update_limits(rwb);
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
return count;
}
static ssize_t queue_wc_show(struct request_queue *q, char *page)
{
if (test_bit(QUEUE_FLAG_WC, &q->queue_flags))
return sprintf(page, "write back\n");
return sprintf(page, "write through\n");
}
static ssize_t queue_wc_store(struct request_queue *q, const char *page,
size_t count)
{
int set = -1;
if (!strncmp(page, "write back", 10))
set = 1;
else if (!strncmp(page, "write through", 13) ||
!strncmp(page, "none", 4))
set = 0;
if (set == -1)
return -EINVAL;
spin_lock_irq(q->queue_lock);
if (set)
queue_flag_set(QUEUE_FLAG_WC, q);
else
queue_flag_clear(QUEUE_FLAG_WC, q);
spin_unlock_irq(q->queue_lock);
return count;
}
static ssize_t queue_dax_show(struct request_queue *q, char *page)
{
return queue_var_show(blk_queue_dax(q), page);
}
static struct queue_sysfs_entry queue_requests_entry = {
.attr = {.name = "nr_requests", .mode = S_IRUGO | S_IWUSR },
.show = queue_requests_show,
.store = queue_requests_store,
};
static struct queue_sysfs_entry queue_ra_entry = {
.attr = {.name = "read_ahead_kb", .mode = S_IRUGO | S_IWUSR },
.show = queue_ra_show,
.store = queue_ra_store,
};
static struct queue_sysfs_entry queue_max_sectors_entry = {
.attr = {.name = "max_sectors_kb", .mode = S_IRUGO | S_IWUSR },
.show = queue_max_sectors_show,
.store = queue_max_sectors_store,
};
static struct queue_sysfs_entry queue_max_hw_sectors_entry = {
.attr = {.name = "max_hw_sectors_kb", .mode = S_IRUGO },
.show = queue_max_hw_sectors_show,
};
static struct queue_sysfs_entry queue_max_segments_entry = {
.attr = {.name = "max_segments", .mode = S_IRUGO },
.show = queue_max_segments_show,
};
static struct queue_sysfs_entry queue_max_discard_segments_entry = {
.attr = {.name = "max_discard_segments", .mode = S_IRUGO },
.show = queue_max_discard_segments_show,
};
static struct queue_sysfs_entry queue_max_integrity_segments_entry = {
.attr = {.name = "max_integrity_segments", .mode = S_IRUGO },
.show = queue_max_integrity_segments_show,
};
static struct queue_sysfs_entry queue_max_segment_size_entry = {
.attr = {.name = "max_segment_size", .mode = S_IRUGO },
.show = queue_max_segment_size_show,
};
static struct queue_sysfs_entry queue_iosched_entry = {
.attr = {.name = "scheduler", .mode = S_IRUGO | S_IWUSR },
.show = elv_iosched_show,
.store = elv_iosched_store,
};
static struct queue_sysfs_entry queue_hw_sector_size_entry = {
.attr = {.name = "hw_sector_size", .mode = S_IRUGO },
.show = queue_logical_block_size_show,
};
static struct queue_sysfs_entry queue_logical_block_size_entry = {
.attr = {.name = "logical_block_size", .mode = S_IRUGO },
.show = queue_logical_block_size_show,
};
static struct queue_sysfs_entry queue_physical_block_size_entry = {
.attr = {.name = "physical_block_size", .mode = S_IRUGO },
.show = queue_physical_block_size_show,
};
static struct queue_sysfs_entry queue_chunk_sectors_entry = {
.attr = {.name = "chunk_sectors", .mode = S_IRUGO },
.show = queue_chunk_sectors_show,
};
static struct queue_sysfs_entry queue_io_min_entry = {
.attr = {.name = "minimum_io_size", .mode = S_IRUGO },
.show = queue_io_min_show,
};
static struct queue_sysfs_entry queue_io_opt_entry = {
.attr = {.name = "optimal_io_size", .mode = S_IRUGO },
.show = queue_io_opt_show,
};
static struct queue_sysfs_entry queue_discard_granularity_entry = {
.attr = {.name = "discard_granularity", .mode = S_IRUGO },
.show = queue_discard_granularity_show,
};
static struct queue_sysfs_entry queue_discard_max_hw_entry = {
.attr = {.name = "discard_max_hw_bytes", .mode = S_IRUGO },
.show = queue_discard_max_hw_show,
};
static struct queue_sysfs_entry queue_discard_max_entry = {
.attr = {.name = "discard_max_bytes", .mode = S_IRUGO | S_IWUSR },
.show = queue_discard_max_show,
.store = queue_discard_max_store,
};
static struct queue_sysfs_entry queue_discard_zeroes_data_entry = {
.attr = {.name = "discard_zeroes_data", .mode = S_IRUGO },
.show = queue_discard_zeroes_data_show,
};
static struct queue_sysfs_entry queue_write_same_max_entry = {
.attr = {.name = "write_same_max_bytes", .mode = S_IRUGO },
.show = queue_write_same_max_show,
};
static struct queue_sysfs_entry queue_write_zeroes_max_entry = {
.attr = {.name = "write_zeroes_max_bytes", .mode = S_IRUGO },
.show = queue_write_zeroes_max_show,
};
static struct queue_sysfs_entry queue_nonrot_entry = {
.attr = {.name = "rotational", .mode = S_IRUGO | S_IWUSR },
.show = queue_show_nonrot,
.store = queue_store_nonrot,
};
static struct queue_sysfs_entry queue_zoned_entry = {
.attr = {.name = "zoned", .mode = S_IRUGO },
.show = queue_zoned_show,
};
static struct queue_sysfs_entry queue_nomerges_entry = {
.attr = {.name = "nomerges", .mode = S_IRUGO | S_IWUSR },
.show = queue_nomerges_show,
.store = queue_nomerges_store,
};
static struct queue_sysfs_entry queue_rq_affinity_entry = {
.attr = {.name = "rq_affinity", .mode = S_IRUGO | S_IWUSR },
.show = queue_rq_affinity_show,
.store = queue_rq_affinity_store,
};
static struct queue_sysfs_entry queue_iostats_entry = {
.attr = {.name = "iostats", .mode = S_IRUGO | S_IWUSR },
.show = queue_show_iostats,
.store = queue_store_iostats,
};
static struct queue_sysfs_entry queue_random_entry = {
.attr = {.name = "add_random", .mode = S_IRUGO | S_IWUSR },
.show = queue_show_random,
.store = queue_store_random,
};
static struct queue_sysfs_entry queue_poll_entry = {
.attr = {.name = "io_poll", .mode = S_IRUGO | S_IWUSR },
.show = queue_poll_show,
.store = queue_poll_store,
};
static struct queue_sysfs_entry queue_poll_delay_entry = {
.attr = {.name = "io_poll_delay", .mode = S_IRUGO | S_IWUSR },
.show = queue_poll_delay_show,
.store = queue_poll_delay_store,
};
static struct queue_sysfs_entry queue_wc_entry = {
.attr = {.name = "write_cache", .mode = S_IRUGO | S_IWUSR },
.show = queue_wc_show,
.store = queue_wc_store,
};
static struct queue_sysfs_entry queue_dax_entry = {
.attr = {.name = "dax", .mode = S_IRUGO },
.show = queue_dax_show,
};
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
static struct queue_sysfs_entry queue_wb_lat_entry = {
.attr = {.name = "wbt_lat_usec", .mode = S_IRUGO | S_IWUSR },
.show = queue_wb_lat_show,
.store = queue_wb_lat_store,
};
#ifdef CONFIG_BLK_DEV_THROTTLING_LOW
static struct queue_sysfs_entry throtl_sample_time_entry = {
.attr = {.name = "throttle_sample_time", .mode = S_IRUGO | S_IWUSR },
.show = blk_throtl_sample_time_show,
.store = blk_throtl_sample_time_store,
};
#endif
static struct attribute *default_attrs[] = {
&queue_requests_entry.attr,
&queue_ra_entry.attr,
&queue_max_hw_sectors_entry.attr,
&queue_max_sectors_entry.attr,
&queue_max_segments_entry.attr,
&queue_max_discard_segments_entry.attr,
&queue_max_integrity_segments_entry.attr,
&queue_max_segment_size_entry.attr,
&queue_iosched_entry.attr,
&queue_hw_sector_size_entry.attr,
&queue_logical_block_size_entry.attr,
&queue_physical_block_size_entry.attr,
&queue_chunk_sectors_entry.attr,
&queue_io_min_entry.attr,
&queue_io_opt_entry.attr,
&queue_discard_granularity_entry.attr,
&queue_discard_max_entry.attr,
&queue_discard_max_hw_entry.attr,
&queue_discard_zeroes_data_entry.attr,
&queue_write_same_max_entry.attr,
&queue_write_zeroes_max_entry.attr,
&queue_nonrot_entry.attr,
&queue_zoned_entry.attr,
&queue_nomerges_entry.attr,
&queue_rq_affinity_entry.attr,
&queue_iostats_entry.attr,
&queue_random_entry.attr,
&queue_poll_entry.attr,
&queue_wc_entry.attr,
&queue_dax_entry.attr,
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
&queue_wb_lat_entry.attr,
&queue_poll_delay_entry.attr,
#ifdef CONFIG_BLK_DEV_THROTTLING_LOW
&throtl_sample_time_entry.attr,
#endif
NULL,
};
#define to_queue(atr) container_of((atr), struct queue_sysfs_entry, attr)
static ssize_t
queue_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
{
struct queue_sysfs_entry *entry = to_queue(attr);
struct request_queue *q =
container_of(kobj, struct request_queue, kobj);
ssize_t res;
if (!entry->show)
return -EIO;
mutex_lock(&q->sysfs_lock);
if (blk_queue_dying(q)) {
mutex_unlock(&q->sysfs_lock);
return -ENOENT;
}
res = entry->show(q, page);
mutex_unlock(&q->sysfs_lock);
return res;
}
static ssize_t
queue_attr_store(struct kobject *kobj, struct attribute *attr,
const char *page, size_t length)
{
struct queue_sysfs_entry *entry = to_queue(attr);
struct request_queue *q;
ssize_t res;
if (!entry->store)
return -EIO;
q = container_of(kobj, struct request_queue, kobj);
mutex_lock(&q->sysfs_lock);
if (blk_queue_dying(q)) {
mutex_unlock(&q->sysfs_lock);
return -ENOENT;
}
res = entry->store(q, page, length);
mutex_unlock(&q->sysfs_lock);
return res;
}
static void blk_free_queue_rcu(struct rcu_head *rcu_head)
{
struct request_queue *q = container_of(rcu_head, struct request_queue,
rcu_head);
kmem_cache_free(blk_requestq_cachep, q);
}
/**
* __blk_release_queue - release a request queue when it is no longer needed
* @work: pointer to the release_work member of the request queue to be released
*
* Description:
* blk_release_queue is the counterpart of blk_init_queue(). It should be
* called when a request queue is being released; typically when a block
* device is being de-registered. Its primary task it to free the queue
* itself.
*
* Notes:
blk-mq: Fix a use-after-free blk-mq users are allowed to free the memory request_queue.tag_set points at after blk_cleanup_queue() has finished but before blk_release_queue() has started. This can happen e.g. in the SCSI core. The SCSI core namely embeds the tag_set structure in a SCSI host structure. The SCSI host structure is freed by scsi_host_dev_release(). This function is called after blk_cleanup_queue() finished but can be called before blk_release_queue(). This means that it is not safe to access request_queue.tag_set from inside blk_release_queue(). Hence remove the blk_sync_queue() call from blk_release_queue(). This call is not necessary - outstanding requests must have finished before blk_release_queue() is called. Additionally, move the blk_mq_free_queue() call from blk_release_queue() to blk_cleanup_queue() to avoid that struct request_queue.tag_set gets accessed after it has been freed. This patch avoids that the following kernel oops can be triggered when deleting a SCSI host for which scsi-mq was enabled: Call Trace: [<ffffffff8109a7c4>] lock_acquire+0xc4/0x270 [<ffffffff814ce111>] mutex_lock_nested+0x61/0x380 [<ffffffff812575f0>] blk_mq_free_queue+0x30/0x180 [<ffffffff8124d654>] blk_release_queue+0x84/0xd0 [<ffffffff8126c29b>] kobject_cleanup+0x7b/0x1a0 [<ffffffff8126c140>] kobject_put+0x30/0x70 [<ffffffff81245895>] blk_put_queue+0x15/0x20 [<ffffffff8125c409>] disk_release+0x99/0xd0 [<ffffffff8133d056>] device_release+0x36/0xb0 [<ffffffff8126c29b>] kobject_cleanup+0x7b/0x1a0 [<ffffffff8126c140>] kobject_put+0x30/0x70 [<ffffffff8125a78a>] put_disk+0x1a/0x20 [<ffffffff811d4cb5>] __blkdev_put+0x135/0x1b0 [<ffffffff811d56a0>] blkdev_put+0x50/0x160 [<ffffffff81199eb4>] kill_block_super+0x44/0x70 [<ffffffff8119a2a4>] deactivate_locked_super+0x44/0x60 [<ffffffff8119a87e>] deactivate_super+0x4e/0x70 [<ffffffff811b9833>] cleanup_mnt+0x43/0x90 [<ffffffff811b98d2>] __cleanup_mnt+0x12/0x20 [<ffffffff8107252c>] task_work_run+0xac/0xe0 [<ffffffff81002c01>] do_notify_resume+0x61/0xa0 [<ffffffff814d2c58>] int_signal+0x12/0x17 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robert Elliott <elliott@hp.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Alexander Gordeev <agordeev@redhat.com> Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-09 23:57:48 +08:00
* The low level driver must have finished any outstanding requests first
* via blk_cleanup_queue().
*
* Although blk_release_queue() may be called with preemption disabled,
* __blk_release_queue() may sleep.
*/
static void __blk_release_queue(struct work_struct *work)
{
struct request_queue *q = container_of(work, typeof(*q), release_work);
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 23:56:08 +08:00
if (test_bit(QUEUE_FLAG_POLL_STATS, &q->queue_flags))
blk_stat_remove_callback(q, q->poll_cb);
blk_stat_free_callback(q->poll_cb);
bdi_put(q->backing_dev_info);
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
blkcg_exit_queue(q);
if (q->elevator) {
ioc_clear_queue(q);
elevator_exit(q, q->elevator);
}
blk-stat: convert to callback-based statistics reporting Currently, statistics are gathered in ~0.13s windows, and users grab the statistics whenever they need them. This is not ideal for both in-tree users: 1. Writeback throttling wants its own dynamically sized window of statistics. Since the blk-stats statistics are reset after every window and the wbt windows don't line up with the blk-stats windows, wbt doesn't see every I/O. 2. Polling currently grabs the statistics on every I/O. Again, depending on how the window lines up, we may miss some I/Os. It's also unnecessary overhead to get the statistics on every I/O; the hybrid polling heuristic would be just as happy with the statistics from the previous full window. This reworks the blk-stats infrastructure to be callback-based: users register a callback that they want called at a given time with all of the statistics from the window during which the callback was active. Users can dynamically bucketize the statistics. wbt and polling both currently use read vs. write, but polling can be extended to further subdivide based on request size. The callbacks are kept on an RCU list, and each callback has percpu stats buffers. There will only be a few users, so the overhead on the I/O completion side is low. The stats flushing is also simplified considerably: since the timer function is responsible for clearing the statistics, we don't have to worry about stale statistics. wbt is a trivial conversion. After the conversion, the windowing problem mentioned above is fixed. For polling, we register an extra callback that caches the previous window's statistics in the struct request_queue for the hybrid polling heuristic to use. Since we no longer have a single stats buffer for the request queue, this also removes the sysfs and debugfs stats entries. To replace those, we add a debugfs entry for the poll statistics. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-21 23:56:08 +08:00
blk_free_queue_stats(q->stats);
block: Avoid that blk_exit_rl() triggers a use-after-free Since the introduction of .init_rq_fn() and .exit_rq_fn() it is essential that the memory allocated for struct request_queue stays around until all blk_exit_rl() calls have finished. Hence make blk_init_rl() take a reference on struct request_queue. This patch fixes the following crash: general protection fault: 0000 [#2] SMP CPU: 3 PID: 28 Comm: ksoftirqd/3 Tainted: G D 4.12.0-rc2-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 task: ffff88013a108040 task.stack: ffffc9000071c000 RIP: 0010:free_request_size+0x1a/0x30 RSP: 0018:ffffc9000071fd38 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b6b RBX: ffff880067362a88 RCX: 0000000000000003 RDX: ffff880067464178 RSI: ffff880067362a88 RDI: ffff880135ea4418 RBP: ffffc9000071fd40 R08: 0000000000000000 R09: 0000000100180009 R10: ffffc9000071fd38 R11: ffffffff81110800 R12: ffff88006752d3d8 R13: ffff88006752d3d8 R14: ffff88013a108040 R15: 000000000000000a FS: 0000000000000000(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa8ec1edb00 CR3: 0000000138ee8000 CR4: 00000000001406e0 Call Trace: mempool_destroy.part.10+0x21/0x40 mempool_destroy+0xe/0x10 blk_exit_rl+0x12/0x20 blkg_free+0x4d/0xa0 __blkg_release_rcu+0x59/0x170 rcu_process_callbacks+0x260/0x4e0 __do_softirq+0x116/0x250 smpboot_thread_fn+0x123/0x1e0 kthread+0x109/0x140 ret_from_fork+0x31/0x40 Fixes: commit e9c787e65c0c ("scsi: allocate scsi_cmnd structures as part of struct request") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-01 05:43:45 +08:00
blk_exit_rl(q, &q->root_rl);
if (q->queue_tags)
__blk_queue_free_tags(q);
if (!q->mq_ops) {
if (q->exit_rq_fn)
q->exit_rq_fn(q, q->fq->flush_rq);
blk_free_flush_queue(q->fq);
} else {
blk_mq_release(q);
}
blk_trace_shutdown(q);
if (q->mq_ops)
blk_mq_debugfs_unregister(q);
block: make generic_make_request handle arbitrarily sized bios The way the block layer is currently written, it goes to great lengths to avoid having to split bios; upper layer code (such as bio_add_page()) checks what the underlying device can handle and tries to always create bios that don't need to be split. But this approach becomes unwieldy and eventually breaks down with stacked devices and devices with dynamic limits, and it adds a lot of complexity. If the block layer could split bios as needed, we could eliminate a lot of complexity elsewhere - particularly in stacked drivers. Code that creates bios can then create whatever size bios are convenient, and more importantly stacked drivers don't have to deal with both their own bio size limitations and the limitations of the (potentially multiple) devices underneath them. In the future this will let us delete merge_bvec_fn and a bunch of other code. We do this by adding calls to blk_queue_split() to the various make_request functions that need it - a few can already handle arbitrary size bios. Note that we add the call _after_ any call to blk_queue_bounce(); this means that blk_queue_split() and blk_recalc_rq_segments() don't need to be concerned with bouncing affecting segment merging. Some make_request_fn() callbacks were simple enough to audit and verify they don't need blk_queue_split() calls. The skipped ones are: * nfhd_make_request (arch/m68k/emu/nfblock.c) * axon_ram_make_request (arch/powerpc/sysdev/axonram.c) * simdisk_make_request (arch/xtensa/platforms/iss/simdisk.c) * brd_make_request (ramdisk - drivers/block/brd.c) * mtip_submit_request (drivers/block/mtip32xx/mtip32xx.c) * loop_make_request * null_queue_bio * bcache's make_request fns Some others are almost certainly safe to remove now, but will be left for future patches. Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ming Lei <ming.lei@canonical.com> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: drbd-user@lists.linbit.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Geoff Levand <geoff@infradead.org> Cc: Jim Paris <jim@jtan.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Acked-by: NeilBrown <neilb@suse.de> (for the 'md/md.c' bits) Acked-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: skip more mq-based drivers, resolve merge conflicts, etc.] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-24 13:37:18 +08:00
if (q->bio_split)
bioset_free(q->bio_split);
ida_simple_remove(&blk_queue_ida, q->id);
call_rcu(&q->rcu_head, blk_free_queue_rcu);
}
static void blk_release_queue(struct kobject *kobj)
{
struct request_queue *q =
container_of(kobj, struct request_queue, kobj);
INIT_WORK(&q->release_work, __blk_release_queue);
schedule_work(&q->release_work);
}
static const struct sysfs_ops queue_sysfs_ops = {
.show = queue_attr_show,
.store = queue_attr_store,
};
struct kobj_type blk_queue_ktype = {
.sysfs_ops = &queue_sysfs_ops,
.default_attrs = default_attrs,
.release = blk_release_queue,
};
int blk_register_queue(struct gendisk *disk)
{
int ret;
struct device *dev = disk_to_dev(disk);
struct request_queue *q = disk->queue;
if (WARN_ON(!q))
return -ENXIO;
WARN_ONCE(test_bit(QUEUE_FLAG_REGISTERED, &q->queue_flags),
"%s is registering an already registered queue\n",
kobject_name(&dev->kobj));
queue_flag_set_unlocked(QUEUE_FLAG_REGISTERED, q);
block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue() b82d4b197c ("blkcg: make request_queue bypassing on allocation") made request_queues bypassed on allocation to avoid switching on and off bypass mode on a queue being initialized. Some drivers allocate and then destroy a lot of queues without fully initializing them and incurring bypass latency overhead on each of them could add upto significant overhead. Unfortunately, blk_init_allocated_queue() is never used by queues of bio-based drivers, which means that all bio-based driver queues are in bypass mode even after initialization and registration complete successfully. Due to the limited way request_queues are used by bio drivers, this problem is hidden pretty well but it shows up when blk-throttle is used in combination with a bio-based driver. Trying to configure (echoing to cgroupfs file) blk-throttle for a bio-based driver hangs indefinitely in blkg_conf_prep() waiting for bypass mode to end. This patch moves the initial blk_queue_bypass_end() call from blk_init_allocated_queue() to blk_register_queue() which is called for any userland-visible queues regardless of its type. I believe this is correct because I don't think there is any block driver which needs or wants working elevator and blk-cgroup on a queue which isn't visible to userland. If there are such users, we need a different solution. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Joseph Glanville <joseph.glanville@orionvm.com.au> Cc: stable@vger.kernel.org Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-21 05:08:52 +08:00
/*
blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode blk-mq uses percpu_ref for its usage counter which tracks the number of in-flight commands and used to synchronously drain the queue on freeze. percpu_ref shutdown takes measureable wallclock time as it involves a sched RCU grace period. This means that draining a blk-mq takes measureable wallclock time. One would think that this shouldn't matter as queue shutdown should be a rare event which takes place asynchronously w.r.t. userland. Unfortunately, SCSI probing involves synchronously setting up and then tearing down a lot of request_queues back-to-back for non-existent LUNs. This means that SCSI probing may take above ten seconds when scsi-mq is used. [ 0.949892] scsi host0: Virtio SCSI HBA [ 1.007864] scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 1.1. PQ: 0 ANSI: 5 [ 1.021299] scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 1.1. PQ: 0 ANSI: 5 [ 1.520356] tsc: Refined TSC clocksource calibration: 2491.910 MHz <stall> [ 16.186549] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 16.190478] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 16.194099] osd: LOADED open-osd 0.2.1 [ 16.203202] sd 0:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 16.208478] sd 0:0:0:0: [sda] Write Protect is off [ 16.211439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.218771] sd 0:0:1:0: [sdb] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 16.223264] sd 0:0:1:0: [sdb] Write Protect is off [ 16.225682] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA This is also the reason why request_queues start in bypass mode which is ended on blk_register_queue() as shutting down a fully functional queue also involves a RCU grace period and the queues for non-existent SCSI devices never reach registration. blk-mq basically needs to do the same thing - start the mq in a degraded mode which is faster to shut down and then make it fully functional only after the queue reaches registration. percpu_ref recently grew facilities to force atomic operation until explicitly switched to percpu mode, which can be used for this purpose. This patch makes blk-mq initialize q->mq_usage_counter in atomic mode and switch it to percpu mode only once blk_register_queue() is reached. Note that this issue was previously worked around by 0a30288da1ae ("blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe") for v3.17. The temp fix was reverted in preparation of adding persistent atomic mode to percpu_ref by 9eca80461a45 ("Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe""). This patch and the prerequisite percpu_ref changes will be merged during v3.18 devel cycle. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Christoph Hellwig <hch@infradead.org> Link: http://lkml.kernel.org/g/20140919113815.GA10791@lst.de Fixes: add703fda981 ("blk-mq: use percpu_ref for mq usage count") Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-25 01:31:50 +08:00
* SCSI probing may synchronously create and destroy a lot of
* request_queues for non-existent devices. Shutting down a fully
* functional queue takes measureable wallclock time as RCU grace
* periods are involved. To avoid excessive latency in these
* cases, a request_queue starts out in a degraded mode which is
* faster to shut down and is made fully functional here as
* request_queues for non-existent devices never get registered.
block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue() b82d4b197c ("blkcg: make request_queue bypassing on allocation") made request_queues bypassed on allocation to avoid switching on and off bypass mode on a queue being initialized. Some drivers allocate and then destroy a lot of queues without fully initializing them and incurring bypass latency overhead on each of them could add upto significant overhead. Unfortunately, blk_init_allocated_queue() is never used by queues of bio-based drivers, which means that all bio-based driver queues are in bypass mode even after initialization and registration complete successfully. Due to the limited way request_queues are used by bio drivers, this problem is hidden pretty well but it shows up when blk-throttle is used in combination with a bio-based driver. Trying to configure (echoing to cgroupfs file) blk-throttle for a bio-based driver hangs indefinitely in blkg_conf_prep() waiting for bypass mode to end. This patch moves the initial blk_queue_bypass_end() call from blk_init_allocated_queue() to blk_register_queue() which is called for any userland-visible queues regardless of its type. I believe this is correct because I don't think there is any block driver which needs or wants working elevator and blk-cgroup on a queue which isn't visible to userland. If there are such users, we need a different solution. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Joseph Glanville <joseph.glanville@orionvm.com.au> Cc: stable@vger.kernel.org Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-21 05:08:52 +08:00
*/
if (!blk_queue_init_done(q)) {
queue_flag_set_unlocked(QUEUE_FLAG_INIT_DONE, q);
block: generic request_queue reference counting Allow pmem, and other synchronous/bio-based block drivers, to fallback on a per-cpu reference count managed by the core for tracking queue live/dead state. The existing per-cpu reference count for the blk_mq case is promoted to be used in all block i/o scenarios. This involves initializing it by default, waiting for it to drop to zero at exit, and holding a live reference over the invocation of q->make_request_fn() in generic_make_request(). The blk_mq code continues to take its own reference per blk_mq request and retains the ability to freeze the queue, but the check that the queue is frozen is moved to generic_make_request(). This fixes crash signatures like the following: BUG: unable to handle kernel paging request at ffff880140000000 [..] Call Trace: [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70 [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem] [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem] [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0 [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110 [<ffffffff8141f966>] submit_bio+0x76/0x170 [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160 [<ffffffff81286e62>] submit_bh+0x12/0x20 [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170 [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90 [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270 [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30 [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250 [<ffffffff81303494>] ext4_put_super+0x64/0x360 [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0 Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <keith.busch@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-22 01:20:12 +08:00
percpu_ref_switch_to_percpu(&q->q_usage_counter);
blk_queue_bypass_end(q);
}
block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue() b82d4b197c ("blkcg: make request_queue bypassing on allocation") made request_queues bypassed on allocation to avoid switching on and off bypass mode on a queue being initialized. Some drivers allocate and then destroy a lot of queues without fully initializing them and incurring bypass latency overhead on each of them could add upto significant overhead. Unfortunately, blk_init_allocated_queue() is never used by queues of bio-based drivers, which means that all bio-based driver queues are in bypass mode even after initialization and registration complete successfully. Due to the limited way request_queues are used by bio drivers, this problem is hidden pretty well but it shows up when blk-throttle is used in combination with a bio-based driver. Trying to configure (echoing to cgroupfs file) blk-throttle for a bio-based driver hangs indefinitely in blkg_conf_prep() waiting for bypass mode to end. This patch moves the initial blk_queue_bypass_end() call from blk_init_allocated_queue() to blk_register_queue() which is called for any userland-visible queues regardless of its type. I believe this is correct because I don't think there is any block driver which needs or wants working elevator and blk-cgroup on a queue which isn't visible to userland. If there are such users, we need a different solution. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Joseph Glanville <joseph.glanville@orionvm.com.au> Cc: stable@vger.kernel.org Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-21 05:08:52 +08:00
ret = blk_trace_init_sysfs(dev);
if (ret)
return ret;
/* Prevent changes through sysfs until registration is completed. */
mutex_lock(&q->sysfs_lock);
Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block * 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits) block: add request clone interface (v2) floppy: fix hibernation ramdisk: remove long-deprecated "ramdisk=" boot-time parameter fs/bio.c: add missing __user annotation block: prevent possible io_context->refcount overflow Add serial number support for virtio_blk, V4a block: Add missing bounce_pfn stacking and fix comments Revert "block: Fix bounce limit setting in DM" cciss: decode unit attention in SCSI error handling code cciss: Remove no longer needed sendcmd reject processing code cciss: change SCSI error handling routines to work with interrupts enabled. cciss: separate error processing and command retrying code in sendcmd_withirq_core() cciss: factor out fix target status processing code from sendcmd functions cciss: simplify interface of sendcmd() and sendcmd_withirq() cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code cciss: Use schedule_timeout_uninterruptible in SCSI error handling code block: needs to set the residual length of a bidi request Revert "block: implement blkdev_readpages" block: Fix bounce limit setting in DM Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt ... Manually fix conflicts with tracing updates in: block/blk-sysfs.c drivers/ide/ide-atapi.c drivers/ide/ide-cd.c drivers/ide/ide-floppy.c drivers/ide/ide-tape.c include/trace/events/block.h kernel/trace/blktrace.c
2009-06-12 01:52:27 +08:00
ret = kobject_add(&q->kobj, kobject_get(&dev->kobj), "%s", "queue");
if (ret < 0) {
blk_trace_remove_sysfs(dev);
goto unlock;
}
if (q->mq_ops) {
__blk_mq_register_dev(dev, q);
blk_mq_debugfs_register(q);
}
kobject_uevent(&q->kobj, KOBJ_ADD);
wbt_enable_default(q);
block: hook up writeback throttling Enable throttling of buffered writeback to make it a lot more smooth, and has way less impact on other system activity. Background writeback should be, by definition, background activity. The fact that we flush huge bundles of it at the time means that it potentially has heavy impacts on foreground workloads, which isn't ideal. We can't easily limit the sizes of writes that we do, since that would impact file system layout in the presence of delayed allocation. So just throttle back buffered writeback, unless someone is waiting for it. The algorithm for when to throttle takes its inspiration in the CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors the minimum latencies of requests over a window of time. In that window of time, if the minimum latency of any request exceeds a given target, then a scale count is incremented and the queue depth is shrunk. The next monitoring window is shrunk accordingly. Unlike CoDel, if we hit a window that exhibits good behavior, then we simply increment the scale count and re-calculate the limits for that scale value. This prevents us from oscillating between a close-to-ideal value and max all the time, instead remaining in the windows where we get good behavior. Unlike CoDel, blk-wb allows the scale count to to negative. This happens if we primarily have writes going on. Unlike positive scale counts, this doesn't change the size of the monitoring window. When the heavy writers finish, blk-bw quickly snaps back to it's stable state of a zero scale count. The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency target to me met. It defaults to 2 msec for non-rotational storage, and 75 msec for rotational storage. Setting this value to '0' disables blk-wb. Generally, a user would not have to touch this setting. We don't enable WBT on devices that are managed with CFQ, and have a non-root block cgroup attached. If we have a proportional share setup on this particular disk, then the wbt throttling will interfere with that. We don't have a strong need for wbt for that case, since we will rely on CFQ doing that for us. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 03:38:14 +08:00
blk_throtl_register_queue(q);
if (q->request_fn || (q->mq_ops && q->elevator)) {
ret = elv_register_queue(q);
if (ret) {
kobject_uevent(&q->kobj, KOBJ_REMOVE);
kobject_del(&q->kobj);
blk_trace_remove_sysfs(dev);
kobject_put(&dev->kobj);
goto unlock;
}
}
ret = 0;
unlock:
mutex_unlock(&q->sysfs_lock);
return ret;
}
block: allow gendisk's request_queue registration to be deferred Since I can remember DM has forced the block layer to allow the allocation and initialization of the request_queue to be distinct operations. Reason for this is block/genhd.c:add_disk() has requires that the request_queue (and associated bdi) be tied to the gendisk before add_disk() is called -- because add_disk() also deals with exposing the request_queue via blk_register_queue(). DM's dynamic creation of arbitrary device types (and associated request_queue types) requires the DM device's gendisk be available so that DM table loads can establish a master/slave relationship with subordinate devices that are referenced by loaded DM tables -- using bd_link_disk_holder(). But until these DM tables, and their associated subordinate devices, are known DM cannot know what type of request_queue it needs -- nor what its queue_limits should be. This chicken and egg scenario has created all manner of problems for DM and, at times, the block layer. Summary of changes: - Add device_add_disk_no_queue_reg() and add_disk_no_queue_reg() variant that drivers may use to add a disk without also calling blk_register_queue(). Driver must call blk_register_queue() once its request_queue is fully initialized. - Return early from blk_unregister_queue() if QUEUE_FLAG_REGISTERED is not set. It won't be set if driver used add_disk_no_queue_reg() but driver encounters an error and must del_gendisk() before calling blk_register_queue(). - Export blk_register_queue(). These changes allow DM to use add_disk_no_queue_reg() to anchor its gendisk as the "master" for master/slave relationships DM must establish with subordinate devices referenced in DM tables that get loaded. Once all "slave" devices for a DM device are known its request_queue can be properly initialized and then advertised via sysfs -- important improvement being that no request_queue resource initialization performed by blk_register_queue() is missed for DM devices anymore. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 11:01:13 +08:00
EXPORT_SYMBOL_GPL(blk_register_queue);
void blk_unregister_queue(struct gendisk *disk)
{
struct request_queue *q = disk->queue;
if (WARN_ON(!q))
return;
block: allow gendisk's request_queue registration to be deferred Since I can remember DM has forced the block layer to allow the allocation and initialization of the request_queue to be distinct operations. Reason for this is block/genhd.c:add_disk() has requires that the request_queue (and associated bdi) be tied to the gendisk before add_disk() is called -- because add_disk() also deals with exposing the request_queue via blk_register_queue(). DM's dynamic creation of arbitrary device types (and associated request_queue types) requires the DM device's gendisk be available so that DM table loads can establish a master/slave relationship with subordinate devices that are referenced by loaded DM tables -- using bd_link_disk_holder(). But until these DM tables, and their associated subordinate devices, are known DM cannot know what type of request_queue it needs -- nor what its queue_limits should be. This chicken and egg scenario has created all manner of problems for DM and, at times, the block layer. Summary of changes: - Add device_add_disk_no_queue_reg() and add_disk_no_queue_reg() variant that drivers may use to add a disk without also calling blk_register_queue(). Driver must call blk_register_queue() once its request_queue is fully initialized. - Return early from blk_unregister_queue() if QUEUE_FLAG_REGISTERED is not set. It won't be set if driver used add_disk_no_queue_reg() but driver encounters an error and must del_gendisk() before calling blk_register_queue(). - Export blk_register_queue(). These changes allow DM to use add_disk_no_queue_reg() to anchor its gendisk as the "master" for master/slave relationships DM must establish with subordinate devices referenced in DM tables that get loaded. Once all "slave" devices for a DM device are known its request_queue can be properly initialized and then advertised via sysfs -- important improvement being that no request_queue resource initialization performed by blk_register_queue() is missed for DM devices anymore. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-09 11:01:13 +08:00
/* Return early if disk->queue was never registered. */
if (!test_bit(QUEUE_FLAG_REGISTERED, &q->queue_flags))
return;
/*
* Protect against the 'queue' kobj being accessed
* while/after it is removed.
*/
mutex_lock(&q->sysfs_lock);
spin_lock_irq(q->queue_lock);
queue_flag_clear(QUEUE_FLAG_REGISTERED, q);
spin_unlock_irq(q->queue_lock);
wbt_exit(q);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
if (q->mq_ops)
blk_mq_unregister_dev(disk_to_dev(disk), q);
blk-mq: new multi-queue block IO queueing mechanism Linux currently has two models for block devices: - The classic request_fn based approach, where drivers use struct request units for IO. The block layer provides various helper functionalities to let drivers share code, things like tag management, timeout handling, queueing, etc. - The "stacked" approach, where a driver squeezes in between the block layer and IO submitter. Since this bypasses the IO stack, driver generally have to manage everything themselves. With drivers being written for new high IOPS devices, the classic request_fn based driver doesn't work well enough. The design dates back to when both SMP and high IOPS was rare. It has problems with scaling to bigger machines, and runs into scaling issues even on smaller machines when you have IOPS in the hundreds of thousands per device. The stacked approach is then most often selected as the model for the driver. But this means that everybody has to re-invent everything, and along with that we get all the problems again that the shared approach solved. This commit introduces blk-mq, block multi queue support. The design is centered around per-cpu queues for queueing IO, which then funnel down into x number of hardware submission queues. We might have a 1:1 mapping between the two, or it might be an N:M mapping. That all depends on what the hardware supports. blk-mq provides various helper functions, which include: - Scalable support for request tagging. Most devices need to be able to uniquely identify a request both in the driver and to the hardware. The tagging uses per-cpu caches for freed tags, to enable cache hot reuse. - Timeout handling without tracking request on a per-device basis. Basically the driver should be able to get a notification, if a request happens to fail. - Optional support for non 1:1 mappings between issue and submission queues. blk-mq can redirect IO completions to the desired location. - Support for per-request payloads. Drivers almost always need to associate a request structure with some driver private command structure. Drivers can tell blk-mq this at init time, and then any request handed to the driver will have the required size of memory associated with it. - Support for merging of IO, and plugging. The stacked model gets neither of these. Even for high IOPS devices, merging sequential IO reduces per-command overhead and thus increases bandwidth. For now, this is provided as a potential 3rd queueing model, with the hope being that, as it matures, it can replace both the classic and stacked model. That would get us back to having just 1 real model for block devices, leaving the stacked approach to dm/md devices (as it was originally intended). Contributions in this patch from the following people: Shaohua Li <shli@fusionio.com> Alexander Gordeev <agordeev@redhat.com> Christoph Hellwig <hch@infradead.org> Mike Christie <michaelc@cs.wisc.edu> Matias Bjorling <m@bjorling.me> Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
if (q->request_fn || (q->mq_ops && q->elevator))
elv_unregister_queue(q);
Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs introduced in commit 1d54ad6da9192fed5dd3b60224d9f2dfea0dcd82. Release kobject also in case the request_fn is NULL. Problem was noticed via kmemleak backtrace when some sysfs entries were note properly destroyed during device removal: unreferenced object 0xffff88001aa76640 (size 80): comm "lvcreate", pid 2120, jiffies 4294885144 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 f0 65 a7 1a 00 88 ff ff .........e...... 90 66 a7 1a 00 88 ff ff 86 1d 53 81 ff ff ff ff .f........S..... backtrace: [<ffffffff813f9cc6>] kmemleak_alloc+0x26/0x60 [<ffffffff8111d693>] kmem_cache_alloc+0x133/0x1c0 [<ffffffff81195891>] sysfs_new_dirent+0x41/0x120 [<ffffffff81194b0c>] sysfs_add_file_mode+0x3c/0xb0 [<ffffffff81197c81>] internal_create_group+0xc1/0x1a0 [<ffffffff81197d93>] sysfs_create_group+0x13/0x20 [<ffffffff810d8004>] blk_trace_init_sysfs+0x14/0x20 [<ffffffff8123f45c>] blk_register_queue+0x3c/0xf0 [<ffffffff812447e4>] add_disk+0x94/0x160 [<ffffffffa00d8b08>] dm_create+0x598/0x6e0 [dm_mod] [<ffffffffa00de951>] dev_create+0x51/0x350 [dm_mod] [<ffffffffa00de823>] ctl_ioctl+0x1a3/0x240 [dm_mod] [<ffffffffa00de8f2>] dm_compat_ctl_ioctl+0x12/0x20 [dm_mod] [<ffffffff81177bfd>] compat_sys_ioctl+0xcd/0x4f0 [<ffffffff81036ed8>] sysenter_dispatch+0x7/0x2c [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com> Reviewed-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-25 12:19:26 +08:00
kobject_uevent(&q->kobj, KOBJ_REMOVE);
kobject_del(&q->kobj);
blk_trace_remove_sysfs(disk_to_dev(disk));
kobject_put(&disk_to_dev(disk)->kobj);
mutex_unlock(&q->sysfs_lock);
}