OpenCloudOS-Kernel/drivers/gpu/drm/meson/meson_drv.c

342 lines
8.4 KiB
C
Raw Normal View History

drm: Add support for Amlogic Meson Graphic Controller The Amlogic Meson Display controller is composed of several components : DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| | vd1 _______ _____________ _________________ | | D |-------| |----| | | | | HDMI PLL | D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | R |-------| |----| Processing | | | | | | osd2 | | | |---| Enci ----------|----|-----VDAC------| R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| A | osd1 | | | Blenders | | Encl ----------|----|---------------| M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| VIU: Video Input Unit --------------------- The Video Input Unit is in charge of the pixel scanout from the DDR memory. It fetches the frames addresses, stride and parameters from the "Canvas" memory. This part is also in charge of the CSC (Colorspace Conversion). It can handle 2 OSD Planes and 2 Video Planes. VPP: Video Post Processing -------------------------- The Video Post Processing is in charge of the scaling and blending of the various planes into a single pixel stream. There is a special "pre-blending" used by the video planes with a dedicated scaler and a "post-blending" to merge with the OSD Planes. The OSD planes also have a dedicated scaler for one of the OSD. VENC: Video Encoders -------------------- The VENC is composed of the multiple pixel encoders : - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - ENCP : Progressive Video Encoder for HDMI - ENCL : LCD LVDS Encoder The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock tree and provides the scanout clock to the VPP and VIU. The ENCI is connected to a single VDAC for Composite Output. The ENCI and ENCP are connected to an on-chip HDMI Transceiver. This driver is a DRM/KMS driver using the following DRM components : - GEM-CMA - PRIME-CMA - Atomic Modesetting - FBDev-CMA For the following SoCs : - GXBB Family (S905) - GXL Family (S905X, S905D) - GXM Family (S912) The current driver only supports the CVBS PAL/NTSC output modes, but the CRTC/Planes management should support bigger modes. But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in a second time. The Device Tree bindings makes use of the endpoints video interface definitions to connect to the optional CVBS and in the future the HDMI Connector nodes. HDMI Support is planned for a next release. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-10 22:29:37 +08:00
/*
* Copyright (C) 2016 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
* Copyright (C) 2014 Endless Mobile
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Written by:
* Jasper St. Pierre <jstpierre@mecheye.net>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/of_graph.h>
#include <drm/drmP.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_flip_work.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_rect.h>
#include <drm/drm_fb_helper.h>
#include "meson_drv.h"
#include "meson_plane.h"
#include "meson_crtc.h"
#include "meson_venc_cvbs.h"
#include "meson_vpp.h"
#include "meson_viu.h"
#include "meson_venc.h"
#include "meson_canvas.h"
#include "meson_registers.h"
#define DRIVER_NAME "meson"
#define DRIVER_DESC "Amlogic Meson DRM driver"
/*
* Video Processing Unit
*
* VPU Handles the Global Video Processing, it includes management of the
* clocks gates, blocks reset lines and power domains.
*
* What is missing :
* - Full reset of entire video processing HW blocks
* - Scaling and setup of the VPU clock
* - Bus clock gates
* - Powering up video processing HW blocks
* - Powering Up HDMI controller and PHY
*/
static void meson_fb_output_poll_changed(struct drm_device *dev)
{
struct meson_drm *priv = dev->dev_private;
drm_fbdev_cma_hotplug_event(priv->fbdev);
}
static const struct drm_mode_config_funcs meson_mode_config_funcs = {
.output_poll_changed = meson_fb_output_poll_changed,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
.fb_create = drm_fb_cma_create,
};
static int meson_enable_vblank(struct drm_device *dev, unsigned int crtc)
{
struct meson_drm *priv = dev->dev_private;
meson_venc_enable_vsync(priv);
return 0;
}
static void meson_disable_vblank(struct drm_device *dev, unsigned int crtc)
{
struct meson_drm *priv = dev->dev_private;
meson_venc_disable_vsync(priv);
}
static irqreturn_t meson_irq(int irq, void *arg)
{
struct drm_device *dev = arg;
struct meson_drm *priv = dev->dev_private;
(void)readl_relaxed(priv->io_base + _REG(VENC_INTFLAG));
meson_crtc_irq(priv);
return IRQ_HANDLED;
}
static const struct file_operations fops = {
.owner = THIS_MODULE,
.open = drm_open,
.release = drm_release,
.unlocked_ioctl = drm_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
.poll = drm_poll,
.read = drm_read,
.llseek = no_llseek,
.mmap = drm_gem_cma_mmap,
};
static struct drm_driver meson_driver = {
.driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM |
DRIVER_MODESET | DRIVER_PRIME |
DRIVER_ATOMIC,
/* Vblank */
.enable_vblank = meson_enable_vblank,
.disable_vblank = meson_disable_vblank,
.get_vblank_counter = drm_vblank_no_hw_counter,
/* IRQ */
.irq_handler = meson_irq,
/* PRIME Ops */
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_import = drm_gem_prime_import,
.gem_prime_export = drm_gem_prime_export,
.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
.gem_prime_vmap = drm_gem_cma_prime_vmap,
.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
.gem_prime_mmap = drm_gem_cma_prime_mmap,
/* GEM Ops */
.dumb_create = drm_gem_cma_dumb_create,
.dumb_destroy = drm_gem_dumb_destroy,
.dumb_map_offset = drm_gem_cma_dumb_map_offset,
.gem_free_object_unlocked = drm_gem_cma_free_object,
.gem_vm_ops = &drm_gem_cma_vm_ops,
/* Misc */
.fops = &fops,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = "20161109",
.major = 1,
.minor = 0,
};
static bool meson_vpu_has_available_connectors(struct device *dev)
{
struct device_node *ep, *remote;
/* Parses each endpoint and check if remote exists */
for_each_endpoint_of_node(dev->of_node, ep) {
/* If the endpoint node exists, consider it enabled */
remote = of_graph_get_remote_port(ep);
if (remote)
return true;
}
return false;
}
static struct regmap_config meson_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = 0x1000,
};
static int meson_drv_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct meson_drm *priv;
struct drm_device *drm;
struct resource *res;
void __iomem *regs;
int ret;
/* Checks if an output connector is available */
if (!meson_vpu_has_available_connectors(dev)) {
dev_err(dev, "No output connector available\n");
return -ENODEV;
}
drm = drm_dev_alloc(&meson_driver, dev);
if (IS_ERR(drm))
return PTR_ERR(drm);
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
goto free_drm;
}
drm->dev_private = priv;
priv->drm = drm;
priv->dev = dev;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vpu");
regs = devm_ioremap_resource(dev, res);
if (IS_ERR(regs))
return PTR_ERR(regs);
priv->io_base = regs;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hhi");
/* Simply ioremap since it may be a shared register zone */
regs = devm_ioremap(dev, res->start, resource_size(res));
if (!regs)
return -EADDRNOTAVAIL;
priv->hhi = devm_regmap_init_mmio(dev, regs,
&meson_regmap_config);
if (IS_ERR(priv->hhi)) {
dev_err(&pdev->dev, "Couldn't create the HHI regmap\n");
return PTR_ERR(priv->hhi);
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmc");
/* Simply ioremap since it may be a shared register zone */
regs = devm_ioremap(dev, res->start, resource_size(res));
if (!regs)
return -EADDRNOTAVAIL;
priv->dmc = devm_regmap_init_mmio(dev, regs,
&meson_regmap_config);
if (IS_ERR(priv->dmc)) {
dev_err(&pdev->dev, "Couldn't create the DMC regmap\n");
return PTR_ERR(priv->dmc);
}
priv->vsync_irq = platform_get_irq(pdev, 0);
drm_vblank_init(drm, 1);
drm_mode_config_init(drm);
/* Encoder Initialization */
ret = meson_venc_cvbs_create(priv);
if (ret)
goto free_drm;
/* Hardware Initialization */
meson_venc_init(priv);
meson_vpp_init(priv);
meson_viu_init(priv);
ret = meson_plane_create(priv);
if (ret)
goto free_drm;
ret = meson_crtc_create(priv);
if (ret)
goto free_drm;
ret = drm_irq_install(drm, priv->vsync_irq);
if (ret)
goto free_drm;
drm_mode_config_reset(drm);
drm->mode_config.max_width = 8192;
drm->mode_config.max_height = 8192;
drm->mode_config.funcs = &meson_mode_config_funcs;
priv->fbdev = drm_fbdev_cma_init(drm, 32,
drm->mode_config.num_connector);
if (IS_ERR(priv->fbdev)) {
ret = PTR_ERR(priv->fbdev);
goto free_drm;
}
drm_kms_helper_poll_init(drm);
platform_set_drvdata(pdev, priv);
ret = drm_dev_register(drm, 0);
if (ret)
goto free_drm;
return 0;
free_drm:
drm_dev_unref(drm);
return ret;
}
static int meson_drv_remove(struct platform_device *pdev)
{
struct drm_device *drm = dev_get_drvdata(&pdev->dev);
struct meson_drm *priv = drm->dev_private;
drm_dev_unregister(drm);
drm_kms_helper_poll_fini(drm);
drm_fbdev_cma_fini(priv->fbdev);
drm_mode_config_cleanup(drm);
drm_vblank_cleanup(drm);
drm_dev_unref(drm);
return 0;
}
static const struct of_device_id dt_match[] = {
{ .compatible = "amlogic,meson-gxbb-vpu" },
{ .compatible = "amlogic,meson-gxl-vpu" },
{ .compatible = "amlogic,meson-gxm-vpu" },
{}
};
MODULE_DEVICE_TABLE(of, dt_match);
static struct platform_driver meson_drm_platform_driver = {
.probe = meson_drv_probe,
.remove = meson_drv_remove,
.driver = {
.name = "meson-drm",
drm: Add support for Amlogic Meson Graphic Controller The Amlogic Meson Display controller is composed of several components : DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| | vd1 _______ _____________ _________________ | | D |-------| |----| | | | | HDMI PLL | D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | R |-------| |----| Processing | | | | | | osd2 | | | |---| Enci ----------|----|-----VDAC------| R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| A | osd1 | | | Blenders | | Encl ----------|----|---------------| M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| VIU: Video Input Unit --------------------- The Video Input Unit is in charge of the pixel scanout from the DDR memory. It fetches the frames addresses, stride and parameters from the "Canvas" memory. This part is also in charge of the CSC (Colorspace Conversion). It can handle 2 OSD Planes and 2 Video Planes. VPP: Video Post Processing -------------------------- The Video Post Processing is in charge of the scaling and blending of the various planes into a single pixel stream. There is a special "pre-blending" used by the video planes with a dedicated scaler and a "post-blending" to merge with the OSD Planes. The OSD planes also have a dedicated scaler for one of the OSD. VENC: Video Encoders -------------------- The VENC is composed of the multiple pixel encoders : - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - ENCP : Progressive Video Encoder for HDMI - ENCL : LCD LVDS Encoder The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock tree and provides the scanout clock to the VPP and VIU. The ENCI is connected to a single VDAC for Composite Output. The ENCI and ENCP are connected to an on-chip HDMI Transceiver. This driver is a DRM/KMS driver using the following DRM components : - GEM-CMA - PRIME-CMA - Atomic Modesetting - FBDev-CMA For the following SoCs : - GXBB Family (S905) - GXL Family (S905X, S905D) - GXM Family (S912) The current driver only supports the CVBS PAL/NTSC output modes, but the CRTC/Planes management should support bigger modes. But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in a second time. The Device Tree bindings makes use of the endpoints video interface definitions to connect to the optional CVBS and in the future the HDMI Connector nodes. HDMI Support is planned for a next release. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-10 22:29:37 +08:00
.of_match_table = dt_match,
},
};
module_platform_driver(meson_drm_platform_driver);
MODULE_AUTHOR("Jasper St. Pierre <jstpierre@mecheye.net>");
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");