UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/powerpc/include/asm/pmc.h

50 lines
1.4 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* pmc.h
* Copyright (C) 2004 David Gibson, IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
[PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch] This patches the ppc32 and ppc64 versions of the headers and .c files with helper functions for manipulating the performance counting hardware. As a side effect, it removes use of the term "perfmon" from ppc32, thus avoiding confusion with the unrelated performance counter interface from HP Labs also called "perfmon". Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac with both ARCH=powerpc and ARCH=ppc{,64} as appropriate. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19 12:53:32 +08:00
#ifndef _POWERPC_PMC_H
#define _POWERPC_PMC_H
[PATCH] powerpc: sanitize header files for user space includes include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-17 05:43:46 +08:00
#ifdef __KERNEL__
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/ptrace.h>
typedef void (*perf_irq_t)(struct pt_regs *);
[PATCH] ppc32: fix perf_irq extern on e500 Fixes e500 build and cleans up traps.c by moving perf_irq extern to pmc.h. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:34:38 +08:00
extern perf_irq_t perf_irq;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int reserve_pmc_hardware(perf_irq_t new_perf_irq);
void release_pmc_hardware(void);
powerpc: Fix bug where perf_counters breaks oprofile Currently there is a bug where if you use oprofile on a pSeries machine, then use perf_counters, then use oprofile again, oprofile will not work correctly; it will lose the PMU configuration the next time the hypervisor does a partition context switch, and thereafter won't count anything. Maynard Johnson identified the sequence causing the problem: - oprofile setup calls ppc_enable_pmcs(), which calls pseries_lpar_enable_pmcs, which tells the hypervisor that we want to use the PMU, and sets the "PMU in use" flag in the lppaca. This flag tells the hypervisor whether it needs to save and restore the PMU config. - The perf_counter code sets and clears the "PMU in use" flag directly as it context-switches the PMU between tasks, and leaves it clear when it finishes. - oprofile setup, called for a new oprofile run, calls ppc_enable_pmcs, which does nothing because it has already been called. In particular it doesn't set the "PMU in use" flag. This fixes the problem by arranging for ppc_enable_pmcs to always set the "PMU in use" flag. It makes the perf_counter code call ppc_enable_pmcs also rather than calling the lower-level function directly, and removes the setting of the "PMU in use" flag from pseries_lpar_enable_pmcs, since that is now done in its caller. This also removes the declaration of pasemi_enable_pmcs because it isn't defined anywhere. Reported-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: <stable@kernel.org) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-09 09:26:03 +08:00
void ppc_enable_pmcs(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
powerpc/pmc: Don't access lppaca on Book3E It doesn't exist ! Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-13 00:08:08 +08:00
#ifdef CONFIG_PPC_BOOK3S_64
powerpc: Fix bug where perf_counters breaks oprofile Currently there is a bug where if you use oprofile on a pSeries machine, then use perf_counters, then use oprofile again, oprofile will not work correctly; it will lose the PMU configuration the next time the hypervisor does a partition context switch, and thereafter won't count anything. Maynard Johnson identified the sequence causing the problem: - oprofile setup calls ppc_enable_pmcs(), which calls pseries_lpar_enable_pmcs, which tells the hypervisor that we want to use the PMU, and sets the "PMU in use" flag in the lppaca. This flag tells the hypervisor whether it needs to save and restore the PMU config. - The perf_counter code sets and clears the "PMU in use" flag directly as it context-switches the PMU between tasks, and leaves it clear when it finishes. - oprofile setup, called for a new oprofile run, calls ppc_enable_pmcs, which does nothing because it has already been called. In particular it doesn't set the "PMU in use" flag. This fixes the problem by arranging for ppc_enable_pmcs to always set the "PMU in use" flag. It makes the perf_counter code call ppc_enable_pmcs also rather than calling the lower-level function directly, and removes the setting of the "PMU in use" flag from pseries_lpar_enable_pmcs, since that is now done in its caller. This also removes the declaration of pasemi_enable_pmcs because it isn't defined anywhere. Reported-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: <stable@kernel.org) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-09 09:26:03 +08:00
#include <asm/lppaca.h>
static inline void ppc_set_pmu_inuse(int inuse)
{
get_lppaca()->pmcregs_in_use = inuse;
}
extern void power4_enable_pmcs(void);
#else /* CONFIG_PPC64 */
static inline void ppc_set_pmu_inuse(int inuse) { }
[PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch] This patches the ppc32 and ppc64 versions of the headers and .c files with helper functions for manipulating the performance counting hardware. As a side effect, it removes use of the term "perfmon" from ppc32, thus avoiding confusion with the unrelated performance counter interface from HP Labs also called "perfmon". Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac with both ARCH=powerpc and ARCH=ppc{,64} as appropriate. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19 12:53:32 +08:00
#endif
[PATCH] ppc64: Move ppc64_enable_pmcs() logic into a ppc_md function This patch moves power4_enable_pmcs() to arch/ppc64/kernel/pmc.c. I've tested it on P5 LPAR and P4. It does what it used to. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-09 09:13:36 +08:00
[PATCH] powerpc: sanitize header files for user space includes include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-17 05:43:46 +08:00
#endif /* __KERNEL__ */
[PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch] This patches the ppc32 and ppc64 versions of the headers and .c files with helper functions for manipulating the performance counting hardware. As a side effect, it removes use of the term "perfmon" from ppc32, thus avoiding confusion with the unrelated performance counter interface from HP Labs also called "perfmon". Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac with both ARCH=powerpc and ARCH=ppc{,64} as appropriate. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19 12:53:32 +08:00
#endif /* _POWERPC_PMC_H */