OpenCloudOS-Kernel/drivers/i2c/i2c-slave-testunit.c

183 lines
4.2 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* I2C slave mode testunit
*
* Copyright (C) 2020 by Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
* Copyright (C) 2020 by Renesas Electronics Corporation
*/
#include <linux/bitops.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/workqueue.h> /* FIXME: is system_long_wq the best choice? */
#define TU_CUR_VERSION 0x01
enum testunit_cmds {
TU_CMD_READ_BYTES = 1, /* save 0 for ABORT, RESET or similar */
TU_CMD_HOST_NOTIFY,
TU_CMD_SMBUS_BLOCK_PROC_CALL,
TU_NUM_CMDS
};
enum testunit_regs {
TU_REG_CMD,
TU_REG_DATAL,
TU_REG_DATAH,
TU_REG_DELAY,
TU_NUM_REGS
};
enum testunit_flags {
TU_FLAG_IN_PROCESS,
};
struct testunit_data {
unsigned long flags;
u8 regs[TU_NUM_REGS];
u8 reg_idx;
struct i2c_client *client;
struct delayed_work worker;
};
static void i2c_slave_testunit_work(struct work_struct *work)
{
struct testunit_data *tu = container_of(work, struct testunit_data, worker.work);
struct i2c_msg msg;
u8 msgbuf[256];
int ret = 0;
msg.addr = I2C_CLIENT_END;
msg.buf = msgbuf;
switch (tu->regs[TU_REG_CMD]) {
case TU_CMD_READ_BYTES:
msg.addr = tu->regs[TU_REG_DATAL];
msg.flags = I2C_M_RD;
msg.len = tu->regs[TU_REG_DATAH];
break;
case TU_CMD_HOST_NOTIFY:
msg.addr = 0x08;
msg.flags = 0;
msg.len = 3;
msgbuf[0] = tu->client->addr;
msgbuf[1] = tu->regs[TU_REG_DATAL];
msgbuf[2] = tu->regs[TU_REG_DATAH];
break;
default:
break;
}
if (msg.addr != I2C_CLIENT_END) {
ret = i2c_transfer(tu->client->adapter, &msg, 1);
/* convert '0 msgs transferred' to errno */
ret = (ret == 0) ? -EIO : ret;
}
if (ret < 0)
dev_err(&tu->client->dev, "CMD%02X failed (%d)\n", tu->regs[TU_REG_CMD], ret);
clear_bit(TU_FLAG_IN_PROCESS, &tu->flags);
}
static int i2c_slave_testunit_slave_cb(struct i2c_client *client,
enum i2c_slave_event event, u8 *val)
{
struct testunit_data *tu = i2c_get_clientdata(client);
bool is_proc_call = tu->reg_idx == 3 && tu->regs[TU_REG_DATAL] == 1 &&
tu->regs[TU_REG_CMD] == TU_CMD_SMBUS_BLOCK_PROC_CALL;
int ret = 0;
switch (event) {
case I2C_SLAVE_WRITE_RECEIVED:
if (test_bit(TU_FLAG_IN_PROCESS, &tu->flags))
return -EBUSY;
if (tu->reg_idx < TU_NUM_REGS)
tu->regs[tu->reg_idx] = *val;
else
ret = -EMSGSIZE;
if (tu->reg_idx <= TU_NUM_REGS)
tu->reg_idx++;
/* TU_REG_CMD always written at this point */
if (tu->regs[TU_REG_CMD] >= TU_NUM_CMDS)
ret = -EINVAL;
break;
case I2C_SLAVE_STOP:
if (tu->reg_idx == TU_NUM_REGS) {
set_bit(TU_FLAG_IN_PROCESS, &tu->flags);
queue_delayed_work(system_long_wq, &tu->worker,
msecs_to_jiffies(10 * tu->regs[TU_REG_DELAY]));
}
fallthrough;
case I2C_SLAVE_WRITE_REQUESTED:
memset(tu->regs, 0, TU_NUM_REGS);
tu->reg_idx = 0;
break;
case I2C_SLAVE_READ_PROCESSED:
if (is_proc_call && tu->regs[TU_REG_DATAH])
tu->regs[TU_REG_DATAH]--;
fallthrough;
case I2C_SLAVE_READ_REQUESTED:
*val = is_proc_call ? tu->regs[TU_REG_DATAH] : TU_CUR_VERSION;
break;
}
return ret;
}
static int i2c_slave_testunit_probe(struct i2c_client *client)
{
struct testunit_data *tu;
tu = devm_kzalloc(&client->dev, sizeof(struct testunit_data), GFP_KERNEL);
if (!tu)
return -ENOMEM;
tu->client = client;
i2c_set_clientdata(client, tu);
INIT_DELAYED_WORK(&tu->worker, i2c_slave_testunit_work);
return i2c_slave_register(client, i2c_slave_testunit_slave_cb);
};
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 16:02:30 +08:00
static void i2c_slave_testunit_remove(struct i2c_client *client)
{
struct testunit_data *tu = i2c_get_clientdata(client);
cancel_delayed_work_sync(&tu->worker);
i2c_slave_unregister(client);
}
static const struct i2c_device_id i2c_slave_testunit_id[] = {
{ "slave-testunit", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, i2c_slave_testunit_id);
static struct i2c_driver i2c_slave_testunit_driver = {
.driver = {
.name = "i2c-slave-testunit",
},
.probe = i2c_slave_testunit_probe,
.remove = i2c_slave_testunit_remove,
.id_table = i2c_slave_testunit_id,
};
module_i2c_driver(i2c_slave_testunit_driver);
MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
MODULE_DESCRIPTION("I2C slave mode test unit");
MODULE_LICENSE("GPL v2");