OpenCloudOS-Kernel/drivers/hwmon/thmc50.c

432 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* thmc50.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
* Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
* Based on 2.4 driver by Frodo Looijaard <frodol@dds.nl> and
* Philip Edelbrock <phil@netroedge.com>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/jiffies.h>
MODULE_LICENSE("GPL");
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
/* Insmod parameters */
enum chips { thmc50, adm1022 };
static unsigned short adm1022_temp3[16];
static unsigned int adm1022_temp3_num;
module_param_array(adm1022_temp3, ushort, &adm1022_temp3_num, 0);
MODULE_PARM_DESC(adm1022_temp3,
"List of adapter,address pairs to enable 3rd temperature (ADM1022 only)");
/* Many THMC50 constants specified below */
/* The THMC50 registers */
#define THMC50_REG_CONF 0x40
#define THMC50_REG_COMPANY_ID 0x3E
#define THMC50_REG_DIE_CODE 0x3F
#define THMC50_REG_ANALOG_OUT 0x19
/*
* The mirror status register cannot be used as
* reading it does not clear alarms.
*/
#define THMC50_REG_INTR 0x41
static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 };
static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 };
#define THMC50_REG_CONF_nFANOFF 0x20
#define THMC50_REG_CONF_PROGRAMMED 0x08
/* Each client has this additional data */
struct thmc50_data {
struct i2c_client *client;
const struct attribute_group *groups[3];
struct mutex update_lock;
enum chips type;
unsigned long last_updated; /* In jiffies */
char has_temp3; /* !=0 if it is ADM1022 in temp3 mode */
char valid; /* !=0 if following fields are valid */
/* Register values */
s8 temp_input[3];
s8 temp_max[3];
s8 temp_min[3];
s8 temp_critical[3];
u8 analog_out;
u8 alarms;
};
static struct thmc50_data *thmc50_update_device(struct device *dev)
{
struct thmc50_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
int timeout = HZ / 5 + (data->type == thmc50 ? HZ : 0);
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + timeout)
|| !data->valid) {
int temps = data->has_temp3 ? 3 : 2;
int i;
int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
prog &= THMC50_REG_CONF_PROGRAMMED;
for (i = 0; i < temps; i++) {
data->temp_input[i] = i2c_smbus_read_byte_data(client,
THMC50_REG_TEMP[i]);
data->temp_max[i] = i2c_smbus_read_byte_data(client,
THMC50_REG_TEMP_MAX[i]);
data->temp_min[i] = i2c_smbus_read_byte_data(client,
THMC50_REG_TEMP_MIN[i]);
data->temp_critical[i] =
i2c_smbus_read_byte_data(client,
prog ? THMC50_REG_TEMP_CRITICAL[i]
: THMC50_REG_TEMP_DEFAULT[i]);
}
data->analog_out =
i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT);
data->alarms =
i2c_smbus_read_byte_data(client, THMC50_REG_INTR);
data->last_updated = jiffies;
data->valid = 1;
}
mutex_unlock(&data->update_lock);
return data;
}
static ssize_t analog_out_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thmc50_data *data = thmc50_update_device(dev);
return sprintf(buf, "%d\n", data->analog_out);
}
static ssize_t analog_out_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct thmc50_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
int config;
unsigned long tmp;
int err;
err = kstrtoul(buf, 10, &tmp);
if (err)
return err;
mutex_lock(&data->update_lock);
data->analog_out = clamp_val(tmp, 0, 255);
i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
data->analog_out);
config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
if (data->analog_out == 0)
config &= ~THMC50_REG_CONF_nFANOFF;
else
config |= THMC50_REG_CONF_nFANOFF;
i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
mutex_unlock(&data->update_lock);
return count;
}
/* There is only one PWM mode = DC */
static ssize_t pwm_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "0\n");
}
/* Temperatures */
static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct thmc50_data *data = thmc50_update_device(dev);
return sprintf(buf, "%d\n", data->temp_input[nr] * 1000);
}
static ssize_t temp_min_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct thmc50_data *data = thmc50_update_device(dev);
return sprintf(buf, "%d\n", data->temp_min[nr] * 1000);
}
static ssize_t temp_min_store(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct thmc50_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
long val;
int err;
err = kstrtol(buf, 10, &val);
if (err)
return err;
mutex_lock(&data->update_lock);
data->temp_min[nr] = clamp_val(val / 1000, -128, 127);
i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MIN[nr],
data->temp_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t temp_max_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct thmc50_data *data = thmc50_update_device(dev);
return sprintf(buf, "%d\n", data->temp_max[nr] * 1000);
}
static ssize_t temp_max_store(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct thmc50_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
long val;
int err;
err = kstrtol(buf, 10, &val);
if (err)
return err;
mutex_lock(&data->update_lock);
data->temp_max[nr] = clamp_val(val / 1000, -128, 127);
i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MAX[nr],
data->temp_max[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t temp_critical_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct thmc50_data *data = thmc50_update_device(dev);
return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000);
}
static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
int index = to_sensor_dev_attr(attr)->index;
struct thmc50_data *data = thmc50_update_device(dev);
return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
}
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0);
static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0);
static SENSOR_DEVICE_ATTR_RO(temp1_crit, temp_critical, 0);
static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1);
static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
static SENSOR_DEVICE_ATTR_RO(temp2_crit, temp_critical, 1);
static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2);
static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2);
static SENSOR_DEVICE_ATTR_RO(temp3_crit, temp_critical, 2);
static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 0);
static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 5);
static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 1);
static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 7);
static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 2);
static SENSOR_DEVICE_ATTR_RW(pwm1, analog_out, 0);
static SENSOR_DEVICE_ATTR_RO(pwm1_mode, pwm_mode, 0);
static struct attribute *thmc50_attributes[] = {
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_min.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp2_min.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp2_crit.dev_attr.attr,
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_fault.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
NULL
};
static const struct attribute_group thmc50_group = {
.attrs = thmc50_attributes,
};
/* for ADM1022 3rd temperature mode */
static struct attribute *temp3_attributes[] = {
&sensor_dev_attr_temp3_max.dev_attr.attr,
&sensor_dev_attr_temp3_min.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr,
&sensor_dev_attr_temp3_crit.dev_attr.attr,
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_fault.dev_attr.attr,
NULL
};
static const struct attribute_group temp3_group = {
.attrs = temp3_attributes,
};
/* Return 0 if detection is successful, -ENODEV otherwise */
static int thmc50_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
unsigned company;
unsigned revision;
unsigned config;
struct i2c_adapter *adapter = client->adapter;
const char *type_name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("thmc50: detect failed, smbus byte data not supported!\n");
return -ENODEV;
}
pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
client->addr, i2c_adapter_id(client->adapter));
company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID);
revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE);
config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
if (revision < 0xc0 || (config & 0x10))
return -ENODEV;
if (company == 0x41) {
int id = i2c_adapter_id(client->adapter);
int i;
type_name = "adm1022";
for (i = 0; i + 1 < adm1022_temp3_num; i += 2)
if (adm1022_temp3[i] == id &&
adm1022_temp3[i + 1] == client->addr) {
/* enable 2nd remote temp */
config |= (1 << 7);
i2c_smbus_write_byte_data(client,
THMC50_REG_CONF,
config);
break;
}
} else if (company == 0x49) {
type_name = "thmc50";
} else {
pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
return -ENODEV;
}
pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
type_name, (revision >> 4) - 0xc, revision & 0xf);
strlcpy(info->type, type_name, I2C_NAME_SIZE);
return 0;
}
static void thmc50_init_client(struct thmc50_data *data)
{
struct i2c_client *client = data->client;
int config;
data->analog_out = i2c_smbus_read_byte_data(client,
THMC50_REG_ANALOG_OUT);
/* set up to at least 1 */
if (data->analog_out == 0) {
data->analog_out = 1;
i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
data->analog_out);
}
config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
config |= 0x1; /* start the chip if it is in standby mode */
if (data->type == adm1022 && (config & (1 << 7)))
data->has_temp3 = 1;
i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
}
static int thmc50_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct thmc50_data *data;
struct device *hwmon_dev;
int idx = 0;
data = devm_kzalloc(dev, sizeof(struct thmc50_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->client = client;
data->type = id->driver_data;
mutex_init(&data->update_lock);
thmc50_init_client(data);
/* sysfs hooks */
data->groups[idx++] = &thmc50_group;
/* Register additional ADM1022 sysfs hooks */
if (data->has_temp3)
data->groups[idx++] = &temp3_group;
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
data, data->groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct i2c_device_id thmc50_id[] = {
{ "adm1022", adm1022 },
{ "thmc50", thmc50 },
{ }
};
MODULE_DEVICE_TABLE(i2c, thmc50_id);
static struct i2c_driver thmc50_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "thmc50",
},
.probe = thmc50_probe,
.id_table = thmc50_id,
.detect = thmc50_detect,
.address_list = normal_i2c,
};
module_i2c_driver(thmc50_driver);
MODULE_AUTHOR("Krzysztof Helt <krzysztof.h1@wp.pl>");
MODULE_DESCRIPTION("THMC50 driver");