OpenCloudOS-Kernel/drivers/bus/mhi/pci_generic.c

1103 lines
31 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* MHI PCI driver - MHI over PCI controller driver
*
* This module is a generic driver for registering MHI-over-PCI devices,
* such as PCIe QCOM modems.
*
* Copyright (C) 2020 Linaro Ltd <loic.poulain@linaro.org>
*/
#include <linux/aer.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/mhi.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
#define MHI_PCI_DEFAULT_BAR_NUM 0
bus: mhi: pci_generic: Fix device recovery failed issue For Foxconn T99W175 device(sdx55 platform) in some host platform, it would be unavailable once the host execute the err handler. After checking, it's caused by the delay time too short to get a successful reset. Please see my test evidence as bewlow(BTW, I add some extra test logs in function mhi_pci_reset_prepare and mhi_pci_reset_done): When MHI_POST_RESET_DELAY_MS equals to 500ms: Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222477] mhi mhi0: Device MHI is not in valid state Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222628] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222631] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222632] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.839993] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.902063] mhi-pci-generic 0000:2d:00.0: reset failed When MHI_POST_RESET_DELAY_MS equals to 1000ms or 1500ms: Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.067857] mhi mhi0: Device MHI is not in valid state Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068029] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068032] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068034] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607006] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607152] mhi mhi0: Requested to power ON Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.302872] mhi mhi0: Failed to reset MHI due to syserr state Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.303011] mhi-pci-generic 0000:2d:00.0: failed to power up MHI controller When MHI_POST_RESET_DELAY_MS equals to 2000ms: Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180527] mhi mhi0: Failed to transition from PM state: Linkdown or Error Fatal Detect to: SYS ERROR Process Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180535] mhi mhi0: Device MHI is not in valid state Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180722] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180725] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180727] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230787] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230928] mhi mhi0: Requested to power ON Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.231173] mhi mhi0: Power on setup success Nov 4 17:51:14 jbd-ThinkEdge kernel: [ 153.254747] mhi mhi0: Wait for device to enter SBL or Mission mode I also tried big data like 3000, and it worked as well. 500ms may not be enough for all support mhi device. We shall increase it to 2000ms at least. Link: https://lore.kernel.org/r/20211108113127.3938-1-slark_xiao@163.com [mani: massaged commit message little bit, added Fixes tag and CCed stable] Fixes: 8ccc3279fcad ("mhi: pci_generic: Add support for reset") Cc: stable@vger.kernel.org Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20211126104951.35685-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26 18:49:51 +08:00
#define MHI_POST_RESET_DELAY_MS 2000
#define HEALTH_CHECK_PERIOD (HZ * 2)
/**
* struct mhi_pci_dev_info - MHI PCI device specific information
* @config: MHI controller configuration
* @name: name of the PCI module
* @fw: firmware path (if any)
* @edl: emergency download mode firmware path (if any)
* @bar_num: PCI base address register to use for MHI MMIO register space
* @dma_data_width: DMA transfer word size (32 or 64 bits)
* @mru_default: default MRU size for MBIM network packets
* @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
* of inband wake support (such as sdx24)
*/
struct mhi_pci_dev_info {
const struct mhi_controller_config *config;
const char *name;
const char *fw;
const char *edl;
unsigned int bar_num;
unsigned int dma_data_width;
unsigned int mru_default;
bool sideband_wake;
};
#define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
{ \
.num = ch_num, \
.name = ch_name, \
.num_elements = el_count, \
.event_ring = ev_ring, \
.dir = DMA_TO_DEVICE, \
.ee_mask = BIT(MHI_EE_AMSS), \
.pollcfg = 0, \
.doorbell = MHI_DB_BRST_DISABLE, \
.lpm_notify = false, \
.offload_channel = false, \
.doorbell_mode_switch = false, \
} \
#define MHI_CHANNEL_CONFIG_DL(ch_num, ch_name, el_count, ev_ring) \
{ \
.num = ch_num, \
.name = ch_name, \
.num_elements = el_count, \
.event_ring = ev_ring, \
.dir = DMA_FROM_DEVICE, \
.ee_mask = BIT(MHI_EE_AMSS), \
.pollcfg = 0, \
.doorbell = MHI_DB_BRST_DISABLE, \
.lpm_notify = false, \
.offload_channel = false, \
.doorbell_mode_switch = false, \
}
#define MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(ch_num, ch_name, el_count, ev_ring) \
{ \
.num = ch_num, \
.name = ch_name, \
.num_elements = el_count, \
.event_ring = ev_ring, \
.dir = DMA_FROM_DEVICE, \
.ee_mask = BIT(MHI_EE_AMSS), \
.pollcfg = 0, \
.doorbell = MHI_DB_BRST_DISABLE, \
.lpm_notify = false, \
.offload_channel = false, \
.doorbell_mode_switch = false, \
.auto_queue = true, \
}
#define MHI_EVENT_CONFIG_CTRL(ev_ring, el_count) \
{ \
.num_elements = el_count, \
.irq_moderation_ms = 0, \
.irq = (ev_ring) + 1, \
.priority = 1, \
.mode = MHI_DB_BRST_DISABLE, \
.data_type = MHI_ER_CTRL, \
.hardware_event = false, \
.client_managed = false, \
.offload_channel = false, \
}
#define MHI_CHANNEL_CONFIG_HW_UL(ch_num, ch_name, el_count, ev_ring) \
{ \
.num = ch_num, \
.name = ch_name, \
.num_elements = el_count, \
.event_ring = ev_ring, \
.dir = DMA_TO_DEVICE, \
.ee_mask = BIT(MHI_EE_AMSS), \
.pollcfg = 0, \
.doorbell = MHI_DB_BRST_ENABLE, \
.lpm_notify = false, \
.offload_channel = false, \
.doorbell_mode_switch = true, \
} \
#define MHI_CHANNEL_CONFIG_HW_DL(ch_num, ch_name, el_count, ev_ring) \
{ \
.num = ch_num, \
.name = ch_name, \
.num_elements = el_count, \
.event_ring = ev_ring, \
.dir = DMA_FROM_DEVICE, \
.ee_mask = BIT(MHI_EE_AMSS), \
.pollcfg = 0, \
.doorbell = MHI_DB_BRST_ENABLE, \
.lpm_notify = false, \
.offload_channel = false, \
.doorbell_mode_switch = true, \
}
#define MHI_CHANNEL_CONFIG_UL_SBL(ch_num, ch_name, el_count, ev_ring) \
{ \
.num = ch_num, \
.name = ch_name, \
.num_elements = el_count, \
.event_ring = ev_ring, \
.dir = DMA_TO_DEVICE, \
.ee_mask = BIT(MHI_EE_SBL), \
.pollcfg = 0, \
.doorbell = MHI_DB_BRST_DISABLE, \
.lpm_notify = false, \
.offload_channel = false, \
.doorbell_mode_switch = false, \
} \
#define MHI_CHANNEL_CONFIG_DL_SBL(ch_num, ch_name, el_count, ev_ring) \
{ \
.num = ch_num, \
.name = ch_name, \
.num_elements = el_count, \
.event_ring = ev_ring, \
.dir = DMA_FROM_DEVICE, \
.ee_mask = BIT(MHI_EE_SBL), \
.pollcfg = 0, \
.doorbell = MHI_DB_BRST_DISABLE, \
.lpm_notify = false, \
.offload_channel = false, \
.doorbell_mode_switch = false, \
}
#define MHI_CHANNEL_CONFIG_UL_FP(ch_num, ch_name, el_count, ev_ring) \
{ \
.num = ch_num, \
.name = ch_name, \
.num_elements = el_count, \
.event_ring = ev_ring, \
.dir = DMA_TO_DEVICE, \
.ee_mask = BIT(MHI_EE_FP), \
.pollcfg = 0, \
.doorbell = MHI_DB_BRST_DISABLE, \
.lpm_notify = false, \
.offload_channel = false, \
.doorbell_mode_switch = false, \
} \
#define MHI_CHANNEL_CONFIG_DL_FP(ch_num, ch_name, el_count, ev_ring) \
{ \
.num = ch_num, \
.name = ch_name, \
.num_elements = el_count, \
.event_ring = ev_ring, \
.dir = DMA_FROM_DEVICE, \
.ee_mask = BIT(MHI_EE_FP), \
.pollcfg = 0, \
.doorbell = MHI_DB_BRST_DISABLE, \
.lpm_notify = false, \
.offload_channel = false, \
.doorbell_mode_switch = false, \
}
#define MHI_EVENT_CONFIG_DATA(ev_ring, el_count) \
{ \
.num_elements = el_count, \
.irq_moderation_ms = 5, \
.irq = (ev_ring) + 1, \
.priority = 1, \
.mode = MHI_DB_BRST_DISABLE, \
.data_type = MHI_ER_DATA, \
.hardware_event = false, \
.client_managed = false, \
.offload_channel = false, \
}
#define MHI_EVENT_CONFIG_HW_DATA(ev_ring, el_count, ch_num) \
{ \
.num_elements = el_count, \
.irq_moderation_ms = 1, \
.irq = (ev_ring) + 1, \
.priority = 1, \
.mode = MHI_DB_BRST_DISABLE, \
.data_type = MHI_ER_DATA, \
.hardware_event = true, \
.client_managed = false, \
.offload_channel = false, \
.channel = ch_num, \
}
static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
MHI_CHANNEL_CONFIG_UL(4, "DIAG", 16, 1),
MHI_CHANNEL_CONFIG_DL(5, "DIAG", 16, 1),
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 4, 0),
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 4, 0),
MHI_CHANNEL_CONFIG_UL(14, "QMI", 4, 0),
MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0),
MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0),
MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 8, 0),
MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 3),
};
static struct mhi_event_config modem_qcom_v1_mhi_events[] = {
/* first ring is control+data ring */
MHI_EVENT_CONFIG_CTRL(0, 64),
/* DIAG dedicated event ring */
MHI_EVENT_CONFIG_DATA(1, 128),
/* Hardware channels request dedicated hardware event rings */
MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
MHI_EVENT_CONFIG_HW_DATA(3, 2048, 101)
};
static const struct mhi_controller_config modem_qcom_v1_mhiv_config = {
.max_channels = 128,
.timeout_ms = 8000,
.num_channels = ARRAY_SIZE(modem_qcom_v1_mhi_channels),
.ch_cfg = modem_qcom_v1_mhi_channels,
.num_events = ARRAY_SIZE(modem_qcom_v1_mhi_events),
.event_cfg = modem_qcom_v1_mhi_events,
};
static const struct mhi_pci_dev_info mhi_qcom_sdx65_info = {
.name = "qcom-sdx65m",
.fw = "qcom/sdx65m/xbl.elf",
.edl = "qcom/sdx65m/edl.mbn",
.config = &modem_qcom_v1_mhiv_config,
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
.dma_data_width = 32,
.sideband_wake = false,
};
static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = {
.name = "qcom-sdx55m",
.fw = "qcom/sdx55m/sbl1.mbn",
.edl = "qcom/sdx55m/edl.mbn",
.config = &modem_qcom_v1_mhiv_config,
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
.dma_data_width = 32,
.mru_default = 32768,
.sideband_wake = false,
};
static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
.name = "qcom-sdx24",
.edl = "qcom/prog_firehose_sdx24.mbn",
.config = &modem_qcom_v1_mhiv_config,
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
.dma_data_width = 32,
.sideband_wake = true,
};
static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = {
MHI_CHANNEL_CONFIG_UL(0, "NMEA", 32, 0),
MHI_CHANNEL_CONFIG_DL(1, "NMEA", 32, 0),
MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 32, 0),
MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 1),
MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1),
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0),
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
/* The EDL firmware is a flash-programmer exposing firehose protocol */
MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
};
static struct mhi_event_config mhi_quectel_em1xx_events[] = {
MHI_EVENT_CONFIG_CTRL(0, 128),
MHI_EVENT_CONFIG_DATA(1, 128),
MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101)
};
static const struct mhi_controller_config modem_quectel_em1xx_config = {
.max_channels = 128,
.timeout_ms = 20000,
.num_channels = ARRAY_SIZE(mhi_quectel_em1xx_channels),
.ch_cfg = mhi_quectel_em1xx_channels,
.num_events = ARRAY_SIZE(mhi_quectel_em1xx_events),
.event_cfg = mhi_quectel_em1xx_events,
};
static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = {
.name = "quectel-em1xx",
.edl = "qcom/prog_firehose_sdx24.mbn",
.config = &modem_quectel_em1xx_config,
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
.dma_data_width = 32,
.sideband_wake = true,
};
static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {
MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 32, 0),
MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 32, 0),
MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 1),
MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1),
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0),
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
};
static struct mhi_event_config mhi_foxconn_sdx55_events[] = {
MHI_EVENT_CONFIG_CTRL(0, 128),
MHI_EVENT_CONFIG_DATA(1, 128),
MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101)
};
static const struct mhi_controller_config modem_foxconn_sdx55_config = {
.max_channels = 128,
.timeout_ms = 20000,
.num_channels = ARRAY_SIZE(mhi_foxconn_sdx55_channels),
.ch_cfg = mhi_foxconn_sdx55_channels,
.num_events = ARRAY_SIZE(mhi_foxconn_sdx55_events),
.event_cfg = mhi_foxconn_sdx55_events,
};
static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = {
.name = "foxconn-sdx55",
.fw = "qcom/sdx55m/sbl1.mbn",
.edl = "qcom/sdx55m/edl.mbn",
.config = &modem_foxconn_sdx55_config,
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
.dma_data_width = 32,
.sideband_wake = false,
};
static const struct mhi_channel_config mhi_mv31_channels[] = {
MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 64, 0),
MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 64, 0),
/* MBIM Control Channel */
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 64, 0),
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 64, 0),
/* MBIM Data Channel */
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 512, 2),
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 512, 3),
};
static struct mhi_event_config mhi_mv31_events[] = {
MHI_EVENT_CONFIG_CTRL(0, 256),
MHI_EVENT_CONFIG_DATA(1, 256),
MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101),
};
static const struct mhi_controller_config modem_mv31_config = {
.max_channels = 128,
.timeout_ms = 20000,
.num_channels = ARRAY_SIZE(mhi_mv31_channels),
.ch_cfg = mhi_mv31_channels,
.num_events = ARRAY_SIZE(mhi_mv31_events),
.event_cfg = mhi_mv31_events,
};
static const struct mhi_pci_dev_info mhi_mv31_info = {
.name = "cinterion-mv31",
.config = &modem_mv31_config,
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
.dma_data_width = 32,
};
static const struct mhi_channel_config mhi_sierra_em919x_channels[] = {
MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 256, 0),
MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 0),
MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 0),
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 128, 0),
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 128, 0),
MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0),
MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0),
MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 512, 1),
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 512, 2),
};
static struct mhi_event_config modem_sierra_em919x_mhi_events[] = {
/* first ring is control+data and DIAG ring */
MHI_EVENT_CONFIG_CTRL(0, 2048),
/* Hardware channels request dedicated hardware event rings */
MHI_EVENT_CONFIG_HW_DATA(1, 2048, 100),
MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101)
};
static const struct mhi_controller_config modem_sierra_em919x_config = {
.max_channels = 128,
.timeout_ms = 24000,
.num_channels = ARRAY_SIZE(mhi_sierra_em919x_channels),
.ch_cfg = mhi_sierra_em919x_channels,
.num_events = ARRAY_SIZE(modem_sierra_em919x_mhi_events),
.event_cfg = modem_sierra_em919x_mhi_events,
};
static const struct mhi_pci_dev_info mhi_sierra_em919x_info = {
.name = "sierra-em919x",
.config = &modem_sierra_em919x_config,
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
.dma_data_width = 32,
.sideband_wake = false,
};
static const struct pci_device_id mhi_pci_id_table[] = {
/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200),
.driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306),
.driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info },
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
.driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info },
{ PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */
.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
{ PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */
.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
.driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
/* T99W175 (sdx55), Both for eSIM and Non-eSIM */
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0ab),
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
/* DW5930e (sdx55), With eSIM, It's also T99W175 */
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0b0),
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
/* DW5930e (sdx55), Non-eSIM, It's also T99W175 */
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0b1),
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
/* T99W175 (sdx55), Based on Qualcomm new baseline */
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0bf),
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
/* MV31-W (Cinterion) */
{ PCI_DEVICE(0x1269, 0x00b3),
.driver_data = (kernel_ulong_t) &mhi_mv31_info },
{ }
};
MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);
enum mhi_pci_device_status {
MHI_PCI_DEV_STARTED,
MHI_PCI_DEV_SUSPENDED,
};
struct mhi_pci_device {
struct mhi_controller mhi_cntrl;
struct pci_saved_state *pci_state;
struct work_struct recovery_work;
struct timer_list health_check_timer;
unsigned long status;
};
static int mhi_pci_read_reg(struct mhi_controller *mhi_cntrl,
void __iomem *addr, u32 *out)
{
*out = readl(addr);
return 0;
}
static void mhi_pci_write_reg(struct mhi_controller *mhi_cntrl,
void __iomem *addr, u32 val)
{
writel(val, addr);
}
static void mhi_pci_status_cb(struct mhi_controller *mhi_cntrl,
enum mhi_callback cb)
{
struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
/* Nothing to do for now */
switch (cb) {
case MHI_CB_FATAL_ERROR:
case MHI_CB_SYS_ERROR:
dev_warn(&pdev->dev, "firmware crashed (%u)\n", cb);
pm_runtime_forbid(&pdev->dev);
break;
case MHI_CB_EE_MISSION_MODE:
pm_runtime_allow(&pdev->dev);
break;
default:
break;
}
}
static void mhi_pci_wake_get_nop(struct mhi_controller *mhi_cntrl, bool force)
{
/* no-op */
}
static void mhi_pci_wake_put_nop(struct mhi_controller *mhi_cntrl, bool override)
{
/* no-op */
}
static void mhi_pci_wake_toggle_nop(struct mhi_controller *mhi_cntrl)
{
/* no-op */
}
static bool mhi_pci_is_alive(struct mhi_controller *mhi_cntrl)
{
struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
u16 vendor = 0;
if (pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor))
return false;
if (vendor == (u16) ~0 || vendor == 0)
return false;
return true;
}
static int mhi_pci_claim(struct mhi_controller *mhi_cntrl,
unsigned int bar_num, u64 dma_mask)
{
struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
int err;
err = pci_assign_resource(pdev, bar_num);
if (err)
return err;
err = pcim_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "failed to enable pci device: %d\n", err);
return err;
}
err = pcim_iomap_regions(pdev, 1 << bar_num, pci_name(pdev));
if (err) {
dev_err(&pdev->dev, "failed to map pci region: %d\n", err);
return err;
}
mhi_cntrl->regs = pcim_iomap_table(pdev)[bar_num];
mhi_cntrl->reg_len = pci_resource_len(pdev, bar_num);
err = dma_set_mask_and_coherent(&pdev->dev, dma_mask);
if (err) {
dev_err(&pdev->dev, "Cannot set proper DMA mask\n");
return err;
}
pci_set_master(pdev);
return 0;
}
static int mhi_pci_get_irqs(struct mhi_controller *mhi_cntrl,
const struct mhi_controller_config *mhi_cntrl_config)
{
struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
int nr_vectors, i;
int *irq;
/*
* Alloc one MSI vector for BHI + one vector per event ring, ideally...
* No explicit pci_free_irq_vectors required, done by pcim_release.
*/
mhi_cntrl->nr_irqs = 1 + mhi_cntrl_config->num_events;
nr_vectors = pci_alloc_irq_vectors(pdev, 1, mhi_cntrl->nr_irqs, PCI_IRQ_MSI);
if (nr_vectors < 0) {
dev_err(&pdev->dev, "Error allocating MSI vectors %d\n",
nr_vectors);
return nr_vectors;
}
if (nr_vectors < mhi_cntrl->nr_irqs) {
dev_warn(&pdev->dev, "using shared MSI\n");
/* Patch msi vectors, use only one (shared) */
for (i = 0; i < mhi_cntrl_config->num_events; i++)
mhi_cntrl_config->event_cfg[i].irq = 0;
mhi_cntrl->nr_irqs = 1;
}
irq = devm_kcalloc(&pdev->dev, mhi_cntrl->nr_irqs, sizeof(int), GFP_KERNEL);
if (!irq)
return -ENOMEM;
for (i = 0; i < mhi_cntrl->nr_irqs; i++) {
int vector = i >= nr_vectors ? (nr_vectors - 1) : i;
irq[i] = pci_irq_vector(pdev, vector);
}
mhi_cntrl->irq = irq;
return 0;
}
static int mhi_pci_runtime_get(struct mhi_controller *mhi_cntrl)
{
/* The runtime_get() MHI callback means:
* Do whatever is requested to leave M3.
*/
return pm_runtime_get(mhi_cntrl->cntrl_dev);
}
static void mhi_pci_runtime_put(struct mhi_controller *mhi_cntrl)
{
/* The runtime_put() MHI callback means:
* Device can be moved in M3 state.
*/
pm_runtime_mark_last_busy(mhi_cntrl->cntrl_dev);
pm_runtime_put(mhi_cntrl->cntrl_dev);
}
static void mhi_pci_recovery_work(struct work_struct *work)
{
struct mhi_pci_device *mhi_pdev = container_of(work, struct mhi_pci_device,
recovery_work);
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
int err;
dev_warn(&pdev->dev, "device recovery started\n");
del_timer(&mhi_pdev->health_check_timer);
pm_runtime_forbid(&pdev->dev);
/* Clean up MHI state */
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
mhi_power_down(mhi_cntrl, false);
mhi_unprepare_after_power_down(mhi_cntrl);
}
pci_set_power_state(pdev, PCI_D0);
pci_load_saved_state(pdev, mhi_pdev->pci_state);
pci_restore_state(pdev);
if (!mhi_pci_is_alive(mhi_cntrl))
goto err_try_reset;
err = mhi_prepare_for_power_up(mhi_cntrl);
if (err)
goto err_try_reset;
err = mhi_sync_power_up(mhi_cntrl);
if (err)
goto err_unprepare;
dev_dbg(&pdev->dev, "Recovery completed\n");
set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
return;
err_unprepare:
mhi_unprepare_after_power_down(mhi_cntrl);
err_try_reset:
if (pci_reset_function(pdev))
dev_err(&pdev->dev, "Recovery failed\n");
}
static void health_check(struct timer_list *t)
{
struct mhi_pci_device *mhi_pdev = from_timer(mhi_pdev, t, health_check_timer);
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) ||
test_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status))
return;
if (!mhi_pci_is_alive(mhi_cntrl)) {
dev_err(mhi_cntrl->cntrl_dev, "Device died\n");
queue_work(system_long_wq, &mhi_pdev->recovery_work);
return;
}
/* reschedule in two seconds */
mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
}
static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data;
const struct mhi_controller_config *mhi_cntrl_config;
struct mhi_pci_device *mhi_pdev;
struct mhi_controller *mhi_cntrl;
int err;
dev_dbg(&pdev->dev, "MHI PCI device found: %s\n", info->name);
/* mhi_pdev.mhi_cntrl must be zero-initialized */
mhi_pdev = devm_kzalloc(&pdev->dev, sizeof(*mhi_pdev), GFP_KERNEL);
if (!mhi_pdev)
return -ENOMEM;
INIT_WORK(&mhi_pdev->recovery_work, mhi_pci_recovery_work);
timer_setup(&mhi_pdev->health_check_timer, health_check, 0);
mhi_cntrl_config = info->config;
mhi_cntrl = &mhi_pdev->mhi_cntrl;
mhi_cntrl->cntrl_dev = &pdev->dev;
mhi_cntrl->iova_start = 0;
mhi_cntrl->iova_stop = (dma_addr_t)DMA_BIT_MASK(info->dma_data_width);
mhi_cntrl->fw_image = info->fw;
mhi_cntrl->edl_image = info->edl;
mhi_cntrl->read_reg = mhi_pci_read_reg;
mhi_cntrl->write_reg = mhi_pci_write_reg;
mhi_cntrl->status_cb = mhi_pci_status_cb;
mhi_cntrl->runtime_get = mhi_pci_runtime_get;
mhi_cntrl->runtime_put = mhi_pci_runtime_put;
mhi_cntrl->mru = info->mru_default;
if (info->sideband_wake) {
mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
}
err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
if (err)
return err;
err = mhi_pci_get_irqs(mhi_cntrl, mhi_cntrl_config);
if (err)
return err;
pci_set_drvdata(pdev, mhi_pdev);
/* Have stored pci confspace at hand for restore in sudden PCI error.
* cache the state locally and discard the PCI core one.
*/
pci_save_state(pdev);
mhi_pdev->pci_state = pci_store_saved_state(pdev);
pci_load_saved_state(pdev, NULL);
pci_enable_pcie_error_reporting(pdev);
err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config);
if (err)
goto err_disable_reporting;
/* MHI bus does not power up the controller by default */
err = mhi_prepare_for_power_up(mhi_cntrl);
if (err) {
dev_err(&pdev->dev, "failed to prepare MHI controller\n");
goto err_unregister;
}
err = mhi_sync_power_up(mhi_cntrl);
if (err) {
dev_err(&pdev->dev, "failed to power up MHI controller\n");
goto err_unprepare;
}
set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
/* start health check */
mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
/* Only allow runtime-suspend if PME capable (for wakeup) */
if (pci_pme_capable(pdev, PCI_D3hot)) {
pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
}
return 0;
err_unprepare:
mhi_unprepare_after_power_down(mhi_cntrl);
err_unregister:
mhi_unregister_controller(mhi_cntrl);
err_disable_reporting:
pci_disable_pcie_error_reporting(pdev);
return err;
}
static void mhi_pci_remove(struct pci_dev *pdev)
{
struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
del_timer_sync(&mhi_pdev->health_check_timer);
cancel_work_sync(&mhi_pdev->recovery_work);
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
mhi_power_down(mhi_cntrl, true);
mhi_unprepare_after_power_down(mhi_cntrl);
}
/* balancing probe put_noidle */
if (pci_pme_capable(pdev, PCI_D3hot))
pm_runtime_get_noresume(&pdev->dev);
mhi_unregister_controller(mhi_cntrl);
pci_disable_pcie_error_reporting(pdev);
}
static void mhi_pci_shutdown(struct pci_dev *pdev)
{
mhi_pci_remove(pdev);
pci_set_power_state(pdev, PCI_D3hot);
}
static void mhi_pci_reset_prepare(struct pci_dev *pdev)
{
struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
dev_info(&pdev->dev, "reset\n");
del_timer(&mhi_pdev->health_check_timer);
/* Clean up MHI state */
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
mhi_power_down(mhi_cntrl, false);
mhi_unprepare_after_power_down(mhi_cntrl);
}
/* cause internal device reset */
mhi_soc_reset(mhi_cntrl);
/* Be sure device reset has been executed */
msleep(MHI_POST_RESET_DELAY_MS);
}
static void mhi_pci_reset_done(struct pci_dev *pdev)
{
struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
int err;
/* Restore initial known working PCI state */
pci_load_saved_state(pdev, mhi_pdev->pci_state);
pci_restore_state(pdev);
/* Is device status available ? */
if (!mhi_pci_is_alive(mhi_cntrl)) {
dev_err(&pdev->dev, "reset failed\n");
return;
}
err = mhi_prepare_for_power_up(mhi_cntrl);
if (err) {
dev_err(&pdev->dev, "failed to prepare MHI controller\n");
return;
}
err = mhi_sync_power_up(mhi_cntrl);
if (err) {
dev_err(&pdev->dev, "failed to power up MHI controller\n");
mhi_unprepare_after_power_down(mhi_cntrl);
return;
}
set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
}
static pci_ers_result_t mhi_pci_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
dev_err(&pdev->dev, "PCI error detected, state = %u\n", state);
if (state == pci_channel_io_perm_failure)
return PCI_ERS_RESULT_DISCONNECT;
/* Clean up MHI state */
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
mhi_power_down(mhi_cntrl, false);
mhi_unprepare_after_power_down(mhi_cntrl);
} else {
/* Nothing to do */
return PCI_ERS_RESULT_RECOVERED;
}
pci_disable_device(pdev);
return PCI_ERS_RESULT_NEED_RESET;
}
static pci_ers_result_t mhi_pci_slot_reset(struct pci_dev *pdev)
{
if (pci_enable_device(pdev)) {
dev_err(&pdev->dev, "Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
}
return PCI_ERS_RESULT_RECOVERED;
}
static void mhi_pci_io_resume(struct pci_dev *pdev)
{
struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
dev_err(&pdev->dev, "PCI slot reset done\n");
queue_work(system_long_wq, &mhi_pdev->recovery_work);
}
static const struct pci_error_handlers mhi_pci_err_handler = {
.error_detected = mhi_pci_error_detected,
.slot_reset = mhi_pci_slot_reset,
.resume = mhi_pci_io_resume,
.reset_prepare = mhi_pci_reset_prepare,
.reset_done = mhi_pci_reset_done,
};
static int __maybe_unused mhi_pci_runtime_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
int err;
if (test_and_set_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status))
return 0;
del_timer(&mhi_pdev->health_check_timer);
cancel_work_sync(&mhi_pdev->recovery_work);
if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) ||
mhi_cntrl->ee != MHI_EE_AMSS)
goto pci_suspend; /* Nothing to do at MHI level */
/* Transition to M3 state */
err = mhi_pm_suspend(mhi_cntrl);
if (err) {
dev_err(&pdev->dev, "failed to suspend device: %d\n", err);
clear_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status);
return -EBUSY;
}
pci_suspend:
pci_disable_device(pdev);
pci_wake_from_d3(pdev, true);
return 0;
}
static int __maybe_unused mhi_pci_runtime_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
int err;
if (!test_and_clear_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status))
return 0;
err = pci_enable_device(pdev);
if (err)
goto err_recovery;
pci_set_master(pdev);
pci_wake_from_d3(pdev, false);
if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) ||
mhi_cntrl->ee != MHI_EE_AMSS)
return 0; /* Nothing to do at MHI level */
/* Exit M3, transition to M0 state */
err = mhi_pm_resume(mhi_cntrl);
if (err) {
dev_err(&pdev->dev, "failed to resume device: %d\n", err);
goto err_recovery;
}
/* Resume health check */
mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
/* It can be a remote wakeup (no mhi runtime_get), update access time */
pm_runtime_mark_last_busy(dev);
return 0;
err_recovery:
/* Do not fail to not mess up our PCI device state, the device likely
* lost power (d3cold) and we simply need to reset it from the recovery
* procedure, trigger the recovery asynchronously to prevent system
* suspend exit delaying.
*/
queue_work(system_long_wq, &mhi_pdev->recovery_work);
pm_runtime_mark_last_busy(dev);
return 0;
}
static int __maybe_unused mhi_pci_suspend(struct device *dev)
{
pm_runtime_disable(dev);
return mhi_pci_runtime_suspend(dev);
}
static int __maybe_unused mhi_pci_resume(struct device *dev)
{
int ret;
/* Depending the platform, device may have lost power (d3cold), we need
* to resume it now to check its state and recover when necessary.
*/
ret = mhi_pci_runtime_resume(dev);
pm_runtime_enable(dev);
return ret;
}
static int __maybe_unused mhi_pci_freeze(struct device *dev)
{
struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
/* We want to stop all operations, hibernation does not guarantee that
* device will be in the same state as before freezing, especially if
* the intermediate restore kernel reinitializes MHI device with new
* context.
*/
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
mhi_power_down(mhi_cntrl, true);
mhi_unprepare_after_power_down(mhi_cntrl);
}
return 0;
}
static int __maybe_unused mhi_pci_restore(struct device *dev)
{
struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
/* Reinitialize the device */
queue_work(system_long_wq, &mhi_pdev->recovery_work);
return 0;
}
static const struct dev_pm_ops mhi_pci_pm_ops = {
SET_RUNTIME_PM_OPS(mhi_pci_runtime_suspend, mhi_pci_runtime_resume, NULL)
#ifdef CONFIG_PM_SLEEP
.suspend = mhi_pci_suspend,
.resume = mhi_pci_resume,
.freeze = mhi_pci_freeze,
.thaw = mhi_pci_restore,
.restore = mhi_pci_restore,
#endif
};
static struct pci_driver mhi_pci_driver = {
.name = "mhi-pci-generic",
.id_table = mhi_pci_id_table,
.probe = mhi_pci_probe,
.remove = mhi_pci_remove,
.shutdown = mhi_pci_shutdown,
.err_handler = &mhi_pci_err_handler,
.driver.pm = &mhi_pci_pm_ops
};
module_pci_driver(mhi_pci_driver);
MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>");
MODULE_DESCRIPTION("Modem Host Interface (MHI) PCI controller driver");
MODULE_LICENSE("GPL");