UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/usb/phy/Kconfig

76 lines
2.3 KiB
Plaintext
Raw Normal View History

USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:47:04 +08:00
#
# Physical Layer USB driver configuration
#
comment "USB Physical Layer drivers"
usb: phy: Fix Kconfig dependency for Phy drivers USB phy layer driver are only built if usb host is selected, but they are used too by USB_GADGET drivers Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26 22:56:48 +08:00
depends on USB || USB_GADGET
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:47:04 +08:00
usb: phy: add a new driver for omap usb2 phy All phy related programming like enabling/disabling the clocks, powering on/off the phy is taken care of by this driver. It is also used for OTG related functionality like srp. This also includes device tree support for usb2 phy driver and the documentation with device tree binding information is updated. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06 22:57:06 +08:00
config OMAP_USB2
tristate "OMAP USB2 PHY Driver"
ARM: OMAP: Fix drivers to depend on omap for internal devices These devices are not available on other architectures, so let's limit them to omap. If the driver subsystem maintainers want to build test system wide changes without building for each target, it's easy to carry a test patch that just strips out the depends entries from Kconfig files. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 04:28:46 +08:00
depends on ARCH_OMAP2PLUS
usb: phy: add a new driver for omap usb2 phy All phy related programming like enabling/disabling the clocks, powering on/off the phy is taken care of by this driver. It is also used for OTG related functionality like srp. This also includes device tree support for usb2 phy driver and the documentation with device tree binding information is updated. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06 22:57:06 +08:00
select USB_OTG_UTILS
usb: start using the control module driver Start using the control module driver for powering on the PHY and for writing to the mailbox instead of writing to the control module registers on their own. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 18:24:00 +08:00
select OMAP_CONTROL_USB
usb: phy: add a new driver for omap usb2 phy All phy related programming like enabling/disabling the clocks, powering on/off the phy is taken care of by this driver. It is also used for OTG related functionality like srp. This also includes device tree support for usb2 phy driver and the documentation with device tree binding information is updated. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06 22:57:06 +08:00
help
Enable this to support the transceiver that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
The USB OTG controller communicates with the comparator using this
driver.
usb: phy: add a new driver for usb3 phy Added a driver for usb3 phy that handles the interaction between usb phy device and dwc3 controller. This also includes device tree support for usb3 phy driver and the documentation with device tree binding information is updated. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 10:51:48 +08:00
config OMAP_USB3
tristate "OMAP USB3 PHY Driver"
select USB_OTG_UTILS
select OMAP_CONTROL_USB
help
Enable this to support the USB3 PHY that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
This driver interacts with the "OMAP Control USB Driver" to power
on/off the PHY.
usb: phy: add a new driver for usb part of control module Added a new driver for the usb part of control module. This has an API to power on the USB2 phy and an API to write to the mailbox depending on whether MUSB has to act in host mode or in device mode. Writing to control module registers for doing the above task which was previously done in omap glue and in omap-usb2 phy will be removed. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 18:23:57 +08:00
config OMAP_CONTROL_USB
tristate "OMAP CONTROL USB Driver"
help
Enable this to add support for the USB part present in the control
module. This driver has API to power on the USB2 PHY and to write to
the mailbox. The mailbox is present only in omap4 and the register to
power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
additional register to power on USB3 PHY.
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:47:04 +08:00
config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
usb: phy: Fix Kconfig dependency for Phy drivers USB phy layer driver are only built if usb host is selected, but they are used too by USB_GADGET drivers Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26 22:56:48 +08:00
depends on USB || USB_GADGET
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 22:47:04 +08:00
depends on I2C
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
This chip is typically used as USB transceiver for USB host, gadget
and OTG drivers (to be selected separately).
To compile this driver as a module, choose M here: the
module will be called isp1301.
usb: phy: mv_u3d: Add usb phy driver for mv_u3d The driver supports phy_init and phy_shutdown functions to enable and disable phy for Marvell USB 3.0 controller. Signed-off-by: Yu Xu <yuxu@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09 22:29:31 +08:00
config MV_U3D_PHY
bool "Marvell USB 3.0 PHY controller Driver"
depends on USB_MV_U3D
select USB_OTG_UTILS
help
Enable this to support Marvell USB 3.0 phy controller for Marvell
SoC.
usb: phy: add R-Car USB phy driver This patch adds Renesas R-Car USB phy driver. It supports R8A7779 chip at this point. R-Car has some USB controllers, but has only one phy-initializer. So, this driver is counting users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-01 10:03:11 +08:00
config USB_RCAR_PHY
tristate "Renesas R-Car USB phy support"
depends on USB || USB_GADGET
select USB_OTG_UTILS
help
Say Y here to add support for the Renesas R-Car USB phy driver.
This chip is typically used as USB phy for USB host, gadget.
This driver supports: R8A7779
To compile this driver as a module, choose M here: the
module will be called rcar-phy.
usb: phy: samsung: Introducing usb phy driver for hsotg This driver uses usb_phy interface to interact with s3c-hsotg. Supports phy_init and phy_shutdown functions to enable/disable usb phy. Support will be extended to host controllers and more Samsung SoCs. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-23 18:33:06 +08:00
config SAMSUNG_USBPHY
bool "Samsung USB PHY controller Driver"
usb: phy: samsung: Add host phy support to samsung-phy driver This patch adds host phy support to samsung-usbphy driver and further adds support for samsung's exynos5250 usb-phy. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-22 21:00:41 +08:00
depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS
usb: phy: samsung: Introducing usb phy driver for hsotg This driver uses usb_phy interface to interact with s3c-hsotg. Supports phy_init and phy_shutdown functions to enable/disable usb phy. Support will be extended to host controllers and more Samsung SoCs. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-23 18:33:06 +08:00
select USB_OTG_UTILS
help
Enable this to support Samsung USB phy controller for samsung
SoCs.